Re: [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family

[Andy Shevchenko <andy.shevchenko@gmail.com>]

On Thu, Feb 9, 2017 at 11:32 AM, Baoyou Xie <baoyou.xie@linaro.org> wrote:
> This patch adds i2c controller driver for ZTE's zx2967 family.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
> Reviewed-by: Shawn Guo <shawnguo@kernel.org>

FWIW:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> ---
>  drivers/i2c/busses/Kconfig      |   9 +
>  drivers/i2c/busses/Makefile     |   1 +
>  drivers/i2c/busses/i2c-zx2967.c | 676 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 686 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-zx2967.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index e4a603e..d983e36 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1246,4 +1246,13 @@ config I2C_OPAL
>           This driver can also be built as a module. If so, the module will be
>           called as i2c-opal.
>
> +config I2C_ZX2967
> +       tristate "ZTE zx2967 I2C support"
> +       depends on ARCH_ZX
> +       default y
> +       help
> +         Selecting this option will add ZX2967 I2C driver.
> +         This driver can also be built as a module. If so, the module will be
> +         called i2c-zx2967.
> +
>  endmenu
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index beb4809..16b2901 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_I2C_XILINX)    += i2c-xiic.o
>  obj-$(CONFIG_I2C_XLR)          += i2c-xlr.o
>  obj-$(CONFIG_I2C_XLP9XX)       += i2c-xlp9xx.o
>  obj-$(CONFIG_I2C_RCAR)         += i2c-rcar.o
> +obj-$(CONFIG_I2C_ZX2967)       += i2c-zx2967.o
>
>  # External I2C/SMBus adapter drivers
>  obj-$(CONFIG_I2C_DIOLAN_U2C)   += i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c
> new file mode 100644
> index 0000000..3a36b84
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-zx2967.c
> @@ -0,0 +1,676 @@
> +/*
> + * ZTE's zx2967 family i2c bus controller driver
> + *
> + * Copyright (C) 2017 ZTE Ltd.
> + *
> + * Author: Baoyou Xie <baoyou.xie@linaro.org>
> + *
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define REG_CMD                                0x04
> +#define REG_DEVADDR_H                  0x0C
> +#define REG_DEVADDR_L                  0x10
> +#define REG_CLK_DIV_FS                 0x14
> +#define REG_CLK_DIV_HS                 0x18
> +#define REG_WRCONF                     0x1C
> +#define REG_RDCONF                     0x20
> +#define REG_DATA                       0x24
> +#define REG_STAT                       0x28
> +
> +#define I2C_STOP                       0
> +#define I2C_MASTER                     BIT(0)
> +#define I2C_ADDR_MODE_TEN              BIT(1)
> +#define I2C_IRQ_MSK_ENABLE             BIT(3)
> +#define I2C_RW_READ                    BIT(4)
> +#define I2C_CMB_RW_EN                  BIT(5)
> +#define I2C_START                      BIT(6)
> +
> +#define I2C_ADDR_LOW_MASK              GENMASK(6, 0)
> +#define I2C_ADDR_LOW_SHIFT             0
> +#define I2C_ADDR_HI_MASK               GENMASK(2, 0)
> +#define I2C_ADDR_HI_SHIFT              7
> +
> +#define I2C_WFIFO_RESET                        BIT(7)
> +#define I2C_RFIFO_RESET                        BIT(7)
> +
> +#define I2C_IRQ_ACK_CLEAR              BIT(7)
> +#define I2C_INT_MASK                   GENMASK(6, 0)
> +
> +#define I2C_TRANS_DONE                 BIT(0)
> +#define I2C_ERROR_DEVICE               BIT(1)
> +#define I2C_ERROR_DATA                 BIT(2)
> +#define I2C_ERROR_MASK                 GENMASK(2, 1)
> +
> +#define I2C_SR_BUSY                    BIT(6)
> +
> +#define I2C_SR_EDEVICE                 BIT(1)
> +#define I2C_SR_EDATA                   BIT(2)
> +
> +#define I2C_FIFO_MAX                   16
> +
> +#define I2C_TIMEOUT                    msecs_to_jiffies(1000)
> +
> +#define DEV(i2c)                       (&i2c->adap.dev)
> +
> +struct zx2967_i2c_info {
> +       spinlock_t              lock;
> +       struct i2c_adapter      adap;
> +       struct clk              *clk;
> +       struct completion       complete;
> +       u32                     clk_freq;
> +       void __iomem            *reg_base;
> +       size_t                  residue;
> +       int                     irq;
> +       int                     msg_rd;
> +       u8                      *cur_trans;
> +       u8                      access_cnt;
> +       bool                    is_suspended;
> +};
> +
> +static void zx2967_i2c_writel(struct zx2967_i2c_info *zx_i2c,
> +                             u32 val, unsigned long reg)
> +{
> +       writel_relaxed(val, zx_i2c->reg_base + reg);
> +}
> +
> +static u32 zx2967_i2c_readl(struct zx2967_i2c_info *zx_i2c, unsigned long reg)
> +{
> +       return readl_relaxed(zx_i2c->reg_base + reg);
> +}
> +
> +static void zx2967_i2c_writesb(struct zx2967_i2c_info *zx_i2c,
> +                              void *data, unsigned long reg, int len)
> +{
> +       writesb(zx_i2c->reg_base + reg, data, len);
> +}
> +
> +static void zx2967_i2c_readsb(struct zx2967_i2c_info *zx_i2c,
> +                             void *data, unsigned long reg, int len)
> +{
> +       readsb(zx_i2c->reg_base + reg, data, len);
> +}
> +
> +static void zx2967_i2c_start_ctrl(struct zx2967_i2c_info *zx_i2c)
> +{
> +       u32 status;
> +       u32 ctl;
> +
> +       status = zx2967_i2c_readl(zx_i2c, REG_STAT);
> +       status |= I2C_IRQ_ACK_CLEAR;
> +       zx2967_i2c_writel(zx_i2c, status, REG_STAT);
> +
> +       ctl = zx2967_i2c_readl(zx_i2c, REG_CMD);
> +       if (zx_i2c->msg_rd)
> +               ctl |= I2C_RW_READ;
> +       else
> +               ctl &= ~I2C_RW_READ;
> +       ctl &= ~I2C_CMB_RW_EN;
> +       ctl |= I2C_START;
> +       zx2967_i2c_writel(zx_i2c, ctl, REG_CMD);
> +}
> +
> +static void zx2967_i2c_flush_fifos(struct zx2967_i2c_info *zx_i2c)
> +{
> +       u32 offset;
> +       u32 val;
> +
> +       if (zx_i2c->msg_rd) {
> +               offset = REG_RDCONF;
> +               val = I2C_RFIFO_RESET;
> +       } else {
> +               offset = REG_WRCONF;
> +               val = I2C_WFIFO_RESET;
> +       }
> +
> +       val |= zx2967_i2c_readl(zx_i2c, offset);
> +       zx2967_i2c_writel(zx_i2c, val, offset);
> +}
> +
> +static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c_info *zx_i2c, u32 size)
> +{
> +       u8 val[I2C_FIFO_MAX] = {0};
> +       int i;
> +
> +       if (size > I2C_FIFO_MAX) {
> +               dev_err(DEV(zx_i2c), "fifo size %d over the max value %d\n",
> +                       size, I2C_FIFO_MAX);
> +               return -EINVAL;
> +       }
> +
> +       zx2967_i2c_readsb(zx_i2c, val, REG_DATA, size);
> +       for (i = 0; i < size; i++) {
> +               *zx_i2c->cur_trans++ = val[i];
> +               zx_i2c->residue--;
> +       }
> +
> +       barrier();
> +
> +       return 0;
> +}
> +
> +static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c_info *zx_i2c)
> +{
> +       size_t residue = zx_i2c->residue;
> +       u8 *buf = zx_i2c->cur_trans;
> +
> +       if (residue == 0) {
> +               dev_err(DEV(zx_i2c), "residue is %d\n", (int)residue);
> +               return -EINVAL;
> +       }
> +
> +       if (residue <= I2C_FIFO_MAX) {
> +               zx2967_i2c_writesb(zx_i2c, buf, REG_DATA, residue);
> +
> +               /* Again update before writing to FIFO to make sure isr sees. */
> +               zx_i2c->residue = 0;
> +               zx_i2c->cur_trans = NULL;
> +       } else {
> +               zx2967_i2c_writesb(zx_i2c, buf, REG_DATA, I2C_FIFO_MAX);
> +               zx_i2c->residue -= I2C_FIFO_MAX;
> +               zx_i2c->cur_trans += I2C_FIFO_MAX;
> +       }
> +
> +       barrier();
> +
> +       return 0;
> +}
> +
> +static int zx2967_i2c_reset_hardware(struct zx2967_i2c_info *zx_i2c)
> +{
> +       u32 val;
> +       u32 clk_div;
> +       u32 status;
> +
> +       val = I2C_MASTER | I2C_IRQ_MSK_ENABLE;
> +       zx2967_i2c_writel(zx_i2c, val, REG_CMD);
> +
> +       clk_div = clk_get_rate(zx_i2c->clk) / zx_i2c->clk_freq - 1;
> +       zx2967_i2c_writel(zx_i2c, clk_div, REG_CLK_DIV_FS);
> +       zx2967_i2c_writel(zx_i2c, clk_div, REG_CLK_DIV_HS);
> +
> +       zx2967_i2c_writel(zx_i2c, I2C_FIFO_MAX - 1, REG_WRCONF);
> +       zx2967_i2c_writel(zx_i2c, I2C_FIFO_MAX - 1, REG_RDCONF);
> +       zx2967_i2c_writel(zx_i2c, 1, REG_RDCONF);
> +
> +       zx2967_i2c_flush_fifos(zx_i2c);
> +
> +       status = zx2967_i2c_readl(zx_i2c, REG_STAT);
> +       if (status & I2C_SR_BUSY)
> +               return -EBUSY;
> +       if (status & (I2C_SR_EDEVICE | I2C_SR_EDATA))
> +               return -EIO;
> +
> +       enable_irq(zx_i2c->irq);
> +
> +       return 0;
> +}
> +
> +static void zx2967_i2c_isr_clr(struct zx2967_i2c_info *zx_i2c)
> +{
> +       u32 status;
> +
> +       status = zx2967_i2c_readl(zx_i2c, REG_STAT);
> +       status |= I2C_IRQ_ACK_CLEAR;
> +       zx2967_i2c_writel(zx_i2c, status, REG_STAT);
> +}
> +
> +static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id)
> +{
> +       u32 status;
> +       struct zx2967_i2c_info *zx_i2c = (struct zx2967_i2c_info *)dev_id;
> +       unsigned long flags;
> +
> +       spin_lock_irqsave(&zx_i2c->lock, flags);
> +
> +       status = zx2967_i2c_readl(zx_i2c, REG_STAT) & I2C_INT_MASK;
> +       zx2967_i2c_isr_clr(zx_i2c);
> +
> +       if (status & I2C_ERROR_MASK) {
> +               spin_unlock_irqrestore(&zx_i2c->lock, flags);
> +               return IRQ_HANDLED;
> +       }
> +
> +       if (status & I2C_TRANS_DONE)
> +               complete(&zx_i2c->complete);
> +
> +       spin_unlock_irqrestore(&zx_i2c->lock, flags);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static void zx2967_set_addr(struct zx2967_i2c_info *zx_i2c, u16 addr)
> +{
> +       u16 val;
> +
> +       val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK;
> +       zx2967_i2c_writel(zx_i2c, val, REG_DEVADDR_L);
> +
> +       val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK;
> +       zx2967_i2c_writel(zx_i2c, val, REG_DEVADDR_H);
> +       if (val)
> +               val = zx2967_i2c_readl(zx_i2c, REG_CMD) | I2C_ADDR_MODE_TEN;
> +       else
> +               val = zx2967_i2c_readl(zx_i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN;
> +       zx2967_i2c_writel(zx_i2c, val, REG_CMD);
> +}
> +
> +static int
> +zx2967_i2c_xfer_read_bytes(struct zx2967_i2c_info *zx_i2c, u32 bytes)
> +{
> +       unsigned long time_left;
> +
> +       reinit_completion(&zx_i2c->complete);
> +       zx2967_i2c_writel(zx_i2c, bytes - 1, REG_RDCONF);
> +       zx2967_i2c_start_ctrl(zx_i2c);
> +
> +       time_left = wait_for_completion_timeout(&zx_i2c->complete,
> +                               I2C_TIMEOUT);
> +       if (time_left == 0) {
> +               dev_err(DEV(zx_i2c), "read i2c transfer timed out\n");
> +               disable_irq(zx_i2c->irq);
> +               zx2967_i2c_reset_hardware(zx_i2c);
> +               return -EIO;
> +       }
> +
> +       return zx2967_i2c_empty_rx_fifo(zx_i2c, bytes);
> +}
> +
> +static int zx2967_i2c_xfer_read(struct zx2967_i2c_info *zx_i2c)
> +{
> +       int ret;
> +       int i;
> +
> +       for (i = 0; i < zx_i2c->access_cnt; i++) {
> +               ret = zx2967_i2c_xfer_read_bytes(zx_i2c, I2C_FIFO_MAX);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       if (zx_i2c->residue > 0) {
> +               ret = zx2967_i2c_xfer_read_bytes(zx_i2c, zx_i2c->residue);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       zx_i2c->residue = 0;
> +       zx_i2c->access_cnt = 0;
> +       return 0;
> +}
> +
> +static int
> +zx2967_i2c_xfer_write_bytes(struct zx2967_i2c_info *zx_i2c, u32 bytes)
> +{
> +       unsigned long time_left;
> +       int ret;
> +
> +       reinit_completion(&zx_i2c->complete);
> +
> +       ret = zx2967_i2c_fill_tx_fifo(zx_i2c);
> +       if (ret)
> +               return ret;
> +
> +       zx2967_i2c_start_ctrl(zx_i2c);
> +
> +       time_left = wait_for_completion_timeout(&zx_i2c->complete,
> +                               I2C_TIMEOUT);
> +       if (time_left == 0) {
> +               dev_err(DEV(zx_i2c), "write i2c transfer timed out\n");
> +               disable_irq(zx_i2c->irq);
> +               zx2967_i2c_reset_hardware(zx_i2c);
> +               return -EIO;
> +       }
> +
> +       return 0;
> +}
> +
> +static int zx2967_i2c_xfer_write(struct zx2967_i2c_info *zx_i2c)
> +{
> +       int ret;
> +       int i;
> +
> +       for (i = 0; i < zx_i2c->access_cnt; i++) {
> +               ret = zx2967_i2c_xfer_write_bytes(zx_i2c, I2C_FIFO_MAX);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       if (zx_i2c->residue > 0) {
> +               ret = zx2967_i2c_xfer_write_bytes(zx_i2c, zx_i2c->residue);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       zx_i2c->residue = 0;
> +       zx_i2c->access_cnt = 0;
> +       return 0;
> +}
> +
> +static int zx2967_i2c_xfer_msg(struct zx2967_i2c_info *zx_i2c,
> +                              struct i2c_msg *msg)
> +{
> +       if (msg->len == 0)
> +               return -EINVAL;
> +
> +       zx2967_i2c_flush_fifos(zx_i2c);
> +
> +       zx_i2c->cur_trans = msg->buf;
> +       zx_i2c->residue = msg->len;
> +       zx_i2c->access_cnt = msg->len / I2C_FIFO_MAX;
> +       zx_i2c->msg_rd = msg->flags & I2C_M_RD;
> +
> +       if (zx_i2c->msg_rd)
> +               return zx2967_i2c_xfer_read(zx_i2c);
> +
> +       return zx2967_i2c_xfer_write(zx_i2c);
> +}
> +
> +static int zx2967_i2c_xfer(struct i2c_adapter *adap,
> +                          struct i2c_msg *msgs, int num)
> +{
> +       struct zx2967_i2c_info *zx_i2c = i2c_get_adapdata(adap);
> +       int ret;
> +       int i;
> +
> +       if (zx_i2c->is_suspended)
> +               return -EBUSY;
> +
> +       zx2967_set_addr(zx_i2c, msgs->addr);
> +
> +       for (i = 0; i < num; i++) {
> +               ret = zx2967_i2c_xfer_msg(zx_i2c, &msgs[i]);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       return num;
> +}
> +
> +static void
> +zx2967_smbus_xfer_prepare(struct zx2967_i2c_info *zx_i2c, u16 addr,
> +                         char read_write, u8 command, int size,
> +                         union i2c_smbus_data *data)
> +{
> +       u32 val;
> +
> +       val = zx2967_i2c_readl(zx_i2c, REG_RDCONF);
> +       val |= I2C_RFIFO_RESET;
> +       zx2967_i2c_writel(zx_i2c, val, REG_RDCONF);
> +       zx2967_set_addr(zx_i2c, addr);
> +       val = zx2967_i2c_readl(zx_i2c, REG_CMD);
> +       val &= ~I2C_RW_READ;
> +       zx2967_i2c_writel(zx_i2c, val, REG_CMD);
> +
> +       switch (size) {
> +       case I2C_SMBUS_BYTE:
> +               zx2967_i2c_writel(zx_i2c, command, REG_DATA);
> +               break;
> +       case I2C_SMBUS_BYTE_DATA:
> +               zx2967_i2c_writel(zx_i2c, command, REG_DATA);
> +               if (read_write == I2C_SMBUS_WRITE)
> +                       zx2967_i2c_writel(zx_i2c, data->byte, REG_DATA);
> +               break;
> +       case I2C_SMBUS_WORD_DATA:
> +               zx2967_i2c_writel(zx_i2c, command, REG_DATA);
> +               if (read_write == I2C_SMBUS_WRITE) {
> +                       zx2967_i2c_writel(zx_i2c, (data->word >> 8), REG_DATA);
> +                       zx2967_i2c_writel(zx_i2c, (data->word & 0xff),
> +                                         REG_DATA);
> +               }
> +               break;
> +       }
> +}
> +
> +static int zx2967_smbus_xfer_read(struct zx2967_i2c_info *zx_i2c, int size,
> +                                 union i2c_smbus_data *data)
> +{
> +       unsigned long time_left;
> +       u8 buf[2];
> +       u32 val;
> +
> +       reinit_completion(&zx_i2c->complete);
> +
> +       val = zx2967_i2c_readl(zx_i2c, REG_CMD);
> +       val |= I2C_CMB_RW_EN;
> +       zx2967_i2c_writel(zx_i2c, val, REG_CMD);
> +
> +       val = zx2967_i2c_readl(zx_i2c, REG_CMD);
> +       val |= I2C_START;
> +       zx2967_i2c_writel(zx_i2c, val, REG_CMD);
> +
> +       time_left = wait_for_completion_timeout(&zx_i2c->complete,
> +                                               I2C_TIMEOUT);
> +       if (time_left == 0) {
> +               dev_err(DEV(zx_i2c), "i2c read transfer timed out\n");
> +               disable_irq(zx_i2c->irq);
> +               zx2967_i2c_reset_hardware(zx_i2c);
> +               return -EIO;
> +       }
> +
> +       switch (size) {
> +       case I2C_SMBUS_BYTE:
> +       case I2C_SMBUS_BYTE_DATA:
> +               val = zx2967_i2c_readl(zx_i2c, REG_DATA);
> +               data->byte = val;
> +               break;
> +       case I2C_SMBUS_WORD_DATA:
> +       case I2C_SMBUS_PROC_CALL:
> +               buf[0] = zx2967_i2c_readl(zx_i2c, REG_DATA);
> +               buf[1] = zx2967_i2c_readl(zx_i2c, REG_DATA);
> +               data->word = (buf[0] << 8) | buf[1];
> +               break;
> +       default:
> +               dev_warn(DEV(zx_i2c), "Unsupported transaction %d\n", size);
> +               return -EOPNOTSUPP;
> +       }
> +
> +       return 0;
> +}
> +
> +static int zx2967_smbus_xfer_write(struct zx2967_i2c_info *zx_i2c)
> +{
> +       unsigned long time_left;
> +       u32 val;
> +
> +       reinit_completion(&zx_i2c->complete);
> +       val = zx2967_i2c_readl(zx_i2c, REG_CMD);
> +       val |= I2C_START;
> +       zx2967_i2c_writel(zx_i2c, val, REG_CMD);
> +
> +       time_left = wait_for_completion_timeout(&zx_i2c->complete,
> +                                               I2C_TIMEOUT);
> +       if (time_left == 0) {
> +               dev_err(DEV(zx_i2c), "i2c write transfer timed out\n");
> +               disable_irq(zx_i2c->irq);
> +               zx2967_i2c_reset_hardware(zx_i2c);
> +               return -EIO;
> +       }
> +
> +       return 0;
> +}
> +
> +static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr,
> +                            unsigned short flags, char read_write,
> +                            u8 command, int size, union i2c_smbus_data *data)
> +{
> +       struct zx2967_i2c_info *zx_i2c = i2c_get_adapdata(adap);
> +
> +       if (size == I2C_SMBUS_QUICK)
> +               read_write = I2C_SMBUS_WRITE;
> +
> +       switch (size) {
> +       case I2C_SMBUS_QUICK:
> +       case I2C_SMBUS_BYTE:
> +       case I2C_SMBUS_BYTE_DATA:
> +       case I2C_SMBUS_WORD_DATA:
> +               zx2967_smbus_xfer_prepare(zx_i2c, addr, read_write,
> +                                         command, size, data);
> +               break;
> +       default:
> +               dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
> +               return -EOPNOTSUPP;
> +       }
> +
> +       if (read_write == I2C_SMBUS_READ)
> +               return zx2967_smbus_xfer_read(zx_i2c, size, data);
> +
> +       return zx2967_smbus_xfer_write(zx_i2c);
> +}
> +
> +#define ZX2967_I2C_FUNCS (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
> +               I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |   \
> +               I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |  \
> +               I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK)
> +
> +static u32 zx2967_i2c_func(struct i2c_adapter *adap)
> +{
> +       return ZX2967_I2C_FUNCS;
> +}
> +
> +static int __maybe_unused zx2967_i2c_suspend(struct device *dev)
> +{
> +       struct zx2967_i2c_info *zx_i2c = dev_get_drvdata(dev);
> +
> +       zx_i2c->is_suspended = true;
> +       clk_disable_unprepare(zx_i2c->clk);
> +
> +       return 0;
> +}
> +
> +static int __maybe_unused zx2967_i2c_resume(struct device *dev)
> +{
> +       struct zx2967_i2c_info *zx_i2c = dev_get_drvdata(dev);
> +
> +       zx_i2c->is_suspended = false;
> +       clk_prepare_enable(zx_i2c->clk);
> +
> +       return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops,
> +                        zx2967_i2c_suspend, zx2967_i2c_resume);
> +
> +static const struct i2c_algorithm zx2967_i2c_algo = {
> +       .master_xfer = zx2967_i2c_xfer,
> +       .smbus_xfer = zx2967_smbus_xfer,
> +       .functionality = zx2967_i2c_func,
> +};
> +
> +static const struct of_device_id zx2967_i2c_of_match[] = {
> +       { .compatible = "zte,zx296718-i2c", },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match);
> +
> +static int zx2967_i2c_probe(struct platform_device *pdev)
> +{
> +       struct zx2967_i2c_info *zx_i2c;
> +       void __iomem *reg_base;
> +       struct resource *res;
> +       struct clk *clk;
> +       int ret;
> +
> +       zx_i2c = devm_kzalloc(&pdev->dev, sizeof(*zx_i2c), GFP_KERNEL);
> +       if (!zx_i2c)
> +               return -ENOMEM;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       reg_base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(reg_base))
> +               return PTR_ERR(reg_base);
> +
> +       clk = devm_clk_get(&pdev->dev, NULL);
> +       if (IS_ERR(clk)) {
> +               dev_err(&pdev->dev, "missing controller clock");
> +               return PTR_ERR(clk);
> +       }
> +
> +       ret = clk_prepare_enable(clk);
> +       if (ret) {
> +               dev_err(&pdev->dev, "failed to enable i2c_clk\n");
> +               return ret;
> +       }
> +
> +       ret = device_property_read_u32(&pdev->dev, "clock-frequency",
> +                                      &zx_i2c->clk_freq);
> +       if (ret) {
> +               dev_err(&pdev->dev, "missing clock-frequency");
> +               return ret;
> +       }
> +
> +       ret = platform_get_irq(pdev, 0);
> +       if (ret < 0)
> +               return ret;
> +
> +       zx_i2c->irq = ret;
> +       zx_i2c->reg_base = reg_base;
> +       zx_i2c->clk = clk;
> +
> +       spin_lock_init(&zx_i2c->lock);
> +       init_completion(&zx_i2c->complete);
> +       platform_set_drvdata(pdev, zx_i2c);
> +
> +       ret = zx2967_i2c_reset_hardware(zx_i2c);
> +       if (ret) {
> +               dev_err(&pdev->dev, "failed to initialize i2c controller\n");
> +               goto err_clk_unprepare;
> +       }
> +
> +       ret = devm_request_irq(&pdev->dev, zx_i2c->irq,
> +                       zx2967_i2c_isr, 0, dev_name(&pdev->dev), zx_i2c);
> +       if (ret) {
> +               dev_err(&pdev->dev, "failed to request irq %i\n", zx_i2c->irq);
> +               goto err_clk_unprepare;
> +       }
> +
> +       i2c_set_adapdata(&zx_i2c->adap, zx_i2c);
> +       strlcpy(zx_i2c->adap.name, "zx2967 i2c adapter",
> +               sizeof(zx_i2c->adap.name));
> +       zx_i2c->adap.algo = &zx2967_i2c_algo;
> +       zx_i2c->adap.nr = pdev->id;
> +       zx_i2c->adap.dev.parent = &pdev->dev;
> +       zx_i2c->adap.dev.of_node = pdev->dev.of_node;
> +
> +       ret = i2c_add_numbered_adapter(&zx_i2c->adap);
> +       if (ret) {
> +               dev_err(&pdev->dev, "failed to add zx2967 i2c adapter\n");
> +               goto err_clk_unprepare;
> +       }
> +
> +       return 0;
> +err_clk_unprepare:
> +       clk_disable_unprepare(zx_i2c->clk);
> +       return ret;
> +}
> +
> +static int zx2967_i2c_remove(struct platform_device *pdev)
> +{
> +       struct zx2967_i2c_info *zx_i2c = platform_get_drvdata(pdev);
> +
> +       i2c_del_adapter(&zx_i2c->adap);
> +       clk_disable_unprepare(zx_i2c->clk);
> +
> +       return 0;
> +}
> +
> +static struct platform_driver zx2967_i2c_driver = {
> +       .probe  = zx2967_i2c_probe,
> +       .remove = zx2967_i2c_remove,
> +       .driver = {
> +               .name  = "zx2967_i2c",
> +               .of_match_table = zx2967_i2c_of_match,
> +               .pm = &zx2967_i2c_dev_pm_ops,
> +       },
> +};
> +module_platform_driver(zx2967_i2c_driver);
> +
> +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
> +MODULE_DESCRIPTION("ZTE zx2967 I2C Bus Controller driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>



-- 
With Best Regards,
Andy Shevchenko