From: Zhi Li <lznuaa@gmail.com> To: Shawn Guo <shawnguo@kernel.org>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, dl-linux-imx <linux-imx@nxp.com>, linux-arm-kernel <linux-arm-kernel@lists.infradead.org> Subject: [PATCH V12 3/4] arm64: dts: imx8qxp: added ddr performance monitor nodes Date: Wed, 19 Jun 2019 13:46:00 -0500 [thread overview] Message-ID: <CAHrpEqT_34eNK-EzRgs-ocDD6pfLzD=FU8n83HgSQVsimJRxPw@mail.gmail.com> (raw) Add ddr performance monitor Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> --- Resent without base64 encode Notes: No change from v9 to v12 Change from v8 to v9 * put ddr-pmu under ddr_subsystem bus Change from v3 to v8 * none Change from v2 to v3 * ddr_pmu0 -> ddr-pmu arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 0683ee2..a33e08c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -378,6 +378,20 @@ }; }; + ddr_subsyss: bus@5c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + lsio_subsys: bus@5d000000 { compatible = "simple-bus"; #address-cells = <1>; -- 2.5.2
WARNING: multiple messages have this Message-ID (diff)
From: Zhi Li <lznuaa@gmail.com> To: Shawn Guo <shawnguo@kernel.org>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, dl-linux-imx <linux-imx@nxp.com>, linux-arm-kernel <linux-arm-kernel@lists.infradead.org> Subject: [PATCH V12 3/4] arm64: dts: imx8qxp: added ddr performance monitor nodes Date: Wed, 19 Jun 2019 13:46:00 -0500 [thread overview] Message-ID: <CAHrpEqT_34eNK-EzRgs-ocDD6pfLzD=FU8n83HgSQVsimJRxPw@mail.gmail.com> (raw) Add ddr performance monitor Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> --- Resent without base64 encode Notes: No change from v9 to v12 Change from v8 to v9 * put ddr-pmu under ddr_subsystem bus Change from v3 to v8 * none Change from v2 to v3 * ddr_pmu0 -> ddr-pmu arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 0683ee2..a33e08c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -378,6 +378,20 @@ }; }; + ddr_subsyss: bus@5c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + lsio_subsys: bus@5d000000 { compatible = "simple-bus"; #address-cells = <1>; -- 2.5.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-06-19 18:46 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-06-19 18:46 Zhi Li [this message] 2019-06-19 18:46 ` [PATCH V12 3/4] arm64: dts: imx8qxp: added ddr performance monitor nodes Zhi Li 2019-06-24 2:02 ` Shawn Guo 2019-06-24 2:02 ` Shawn Guo -- strict thread matches above, loose matches on Subject: below -- 2019-05-01 18:43 [PATCH V12 1/4] dt-bindings: perf: imx8-ddr: add imx8qxp ddr performance monitor Frank Li 2019-05-01 18:43 ` [PATCH V12 3/4] arm64: dts: imx8qxp: added ddr performance monitor nodes Frank Li 2019-05-01 18:43 ` Frank Li 2019-06-18 6:37 ` Shawn Guo 2019-06-18 6:37 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CAHrpEqT_34eNK-EzRgs-ocDD6pfLzD=FU8n83HgSQVsimJRxPw@mail.gmail.com' \ --to=lznuaa@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.