* [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
@ 2018-02-01 21:16 ` Michael Lyle
0 siblings, 0 replies; 8+ messages in thread
From: Michael Lyle @ 2018-02-01 21:16 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: kgene-DgEjT+Ai2ygdnm+yROfE0A, CHANHO PARK, Krzysztof Kozlowski,
Michael Lyle
On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
it, and turn on the regulator used for it, so that both wifi & bluetooth
work.
Verified to work on the Artik 520 evaluation board.
v2: accidentally sent out v1
v3: non-removable instead of broken-cd, alphabetical order, formatting
Signed-off-by: Michael Lyle <mlyle-dTEscH1tG2Q@public.gmane.org>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 0aa577fe9f95..620b50c19ead 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -245,6 +245,7 @@
regulator-name = "VLDO23_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo24_reg: LDO24 {
@@ -316,6 +317,41 @@
status = "okay";
};
+&mshc_1 {
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ non-removable;
+ keep-power-in-suspend;
+ fifo-depth = <0x40>;
+ vqmmc-supply = <&ldo11_reg>;
+ /*
+ * Voltage negotiation is broken for the SDIO periph so we
+ * can't actually set the voltage here.
+ * vmmc-supply = <&ldo23_reg>;
+ */
+ card-detect-delay = <500>;
+ clock-frequency = <100000000>;
+ max-frequency = <100000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&pinctrl_1 {
+ wlanen: wlanen {
+ samsung,pins = "gpx2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
+ samsung,pin-val = <1>;
+ };
+};
+
&rtc {
clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
@ 2018-02-01 21:16 ` Michael Lyle
0 siblings, 0 replies; 8+ messages in thread
From: Michael Lyle @ 2018-02-01 21:16 UTC (permalink / raw)
To: linux-arm-kernel
On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
it, and turn on the regulator used for it, so that both wifi & bluetooth
work.
Verified to work on the Artik 520 evaluation board.
v2: accidentally sent out v1
v3: non-removable instead of broken-cd, alphabetical order, formatting
Signed-off-by: Michael Lyle <mlyle@lyle.org>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 0aa577fe9f95..620b50c19ead 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -245,6 +245,7 @@
regulator-name = "VLDO23_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo24_reg: LDO24 {
@@ -316,6 +317,41 @@
status = "okay";
};
+&mshc_1 {
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ non-removable;
+ keep-power-in-suspend;
+ fifo-depth = <0x40>;
+ vqmmc-supply = <&ldo11_reg>;
+ /*
+ * Voltage negotiation is broken for the SDIO periph so we
+ * can't actually set the voltage here.
+ * vmmc-supply = <&ldo23_reg>;
+ */
+ card-detect-delay = <500>;
+ clock-frequency = <100000000>;
+ max-frequency = <100000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&pinctrl_1 {
+ wlanen: wlanen {
+ samsung,pins = "gpx2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
+ samsung,pin-val = <1>;
+ };
+};
+
&rtc {
clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
--
2.14.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
2018-02-01 21:16 ` Michael Lyle
@ 2018-02-04 16:26 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2018-02-04 16:26 UTC (permalink / raw)
To: Michael Lyle
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, kgene-DgEjT+Ai2ygdnm+yROfE0A,
CHANHO PARK
On Thu, Feb 01, 2018 at 01:16:56PM -0800, Michael Lyle wrote:
> On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
> it, and turn on the regulator used for it, so that both wifi & bluetooth
> work.
>
> Verified to work on the Artik 520 evaluation board.
>
> v2: accidentally sent out v1
> v3: non-removable instead of broken-cd, alphabetical order, formatting
Changelog should go after --- separator so it would not end in commit.
I'll fix it during applying. Looks good to me. I'll take it after merge
window.
Best regards,
Krzysztof
>
> Signed-off-by: Michael Lyle <mlyle-dTEscH1tG2Q@public.gmane.org>
> ---
> arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> index 0aa577fe9f95..620b50c19ead 100644
> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> @@ -245,6 +245,7 @@
> regulator-name = "VLDO23_1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> };
>
> ldo24_reg: LDO24 {
> @@ -316,6 +317,41 @@
> status = "okay";
> };
>
> +&mshc_1 {
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + disable-wp;
> + non-removable;
> + keep-power-in-suspend;
> + fifo-depth = <0x40>;
> + vqmmc-supply = <&ldo11_reg>;
> + /*
> + * Voltage negotiation is broken for the SDIO periph so we
> + * can't actually set the voltage here.
> + * vmmc-supply = <&ldo23_reg>;
> + */
> + card-detect-delay = <500>;
> + clock-frequency = <100000000>;
> + max-frequency = <100000000>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 1>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&pinctrl_1 {
> + wlanen: wlanen {
> + samsung,pins = "gpx2-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
> + samsung,pin-val = <1>;
> + };
> +};
> +
> &rtc {
> clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
> clock-names = "rtc", "rtc_src";
> --
> 2.14.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
@ 2018-02-04 16:26 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2018-02-04 16:26 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 01, 2018 at 01:16:56PM -0800, Michael Lyle wrote:
> On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
> it, and turn on the regulator used for it, so that both wifi & bluetooth
> work.
>
> Verified to work on the Artik 520 evaluation board.
>
> v2: accidentally sent out v1
> v3: non-removable instead of broken-cd, alphabetical order, formatting
Changelog should go after --- separator so it would not end in commit.
I'll fix it during applying. Looks good to me. I'll take it after merge
window.
Best regards,
Krzysztof
>
> Signed-off-by: Michael Lyle <mlyle@lyle.org>
> ---
> arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> index 0aa577fe9f95..620b50c19ead 100644
> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
> @@ -245,6 +245,7 @@
> regulator-name = "VLDO23_1.8V";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> };
>
> ldo24_reg: LDO24 {
> @@ -316,6 +317,41 @@
> status = "okay";
> };
>
> +&mshc_1 {
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + disable-wp;
> + non-removable;
> + keep-power-in-suspend;
> + fifo-depth = <0x40>;
> + vqmmc-supply = <&ldo11_reg>;
> + /*
> + * Voltage negotiation is broken for the SDIO periph so we
> + * can't actually set the voltage here.
> + * vmmc-supply = <&ldo23_reg>;
> + */
> + card-detect-delay = <500>;
> + clock-frequency = <100000000>;
> + max-frequency = <100000000>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 1>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&pinctrl_1 {
> + wlanen: wlanen {
> + samsung,pins = "gpx2-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
> + samsung,pin-val = <1>;
> + };
> +};
> +
> &rtc {
> clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
> clock-names = "rtc", "rtc_src";
> --
> 2.14.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
2018-02-04 16:26 ` Krzysztof Kozlowski
@ 2018-02-04 18:18 ` Michael Lyle
-1 siblings, 0 replies; 8+ messages in thread
From: Michael Lyle @ 2018-02-04 18:18 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, kgene-DgEjT+Ai2ygdnm+yROfE0A,
CHANHO PARK
Hi Krzysztof ---
Excellent, thank you for all your help.
Mike
On Sun, Feb 4, 2018 at 8:26 AM, Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Thu, Feb 01, 2018 at 01:16:56PM -0800, Michael Lyle wrote:
>> On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
>> it, and turn on the regulator used for it, so that both wifi & bluetooth
>> work.
>>
>> Verified to work on the Artik 520 evaluation board.
>>
>> v2: accidentally sent out v1
>> v3: non-removable instead of broken-cd, alphabetical order, formatting
>
> Changelog should go after --- separator so it would not end in commit.
>
> I'll fix it during applying. Looks good to me. I'll take it after merge
> window.
>
> Best regards,
> Krzysztof
>
>>
>> Signed-off-by: Michael Lyle <mlyle-dTEscH1tG2Q@public.gmane.org>
>> ---
>> arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> index 0aa577fe9f95..620b50c19ead 100644
>> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> @@ -245,6 +245,7 @@
>> regulator-name = "VLDO23_1.8V";
>> regulator-min-microvolt = <1800000>;
>> regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> };
>>
>> ldo24_reg: LDO24 {
>> @@ -316,6 +317,41 @@
>> status = "okay";
>> };
>>
>> +&mshc_1 {
>> + cap-sd-highspeed;
>> + cap-sdio-irq;
>> + disable-wp;
>> + non-removable;
>> + keep-power-in-suspend;
>> + fifo-depth = <0x40>;
>> + vqmmc-supply = <&ldo11_reg>;
>> + /*
>> + * Voltage negotiation is broken for the SDIO periph so we
>> + * can't actually set the voltage here.
>> + * vmmc-supply = <&ldo23_reg>;
>> + */
>> + card-detect-delay = <500>;
>> + clock-frequency = <100000000>;
>> + max-frequency = <100000000>;
>> + samsung,dw-mshc-ciu-div = <3>;
>> + samsung,dw-mshc-sdr-timing = <0 1>;
>> + samsung,dw-mshc-ddr-timing = <1 2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
>> + bus-width = <4>;
>> + status = "okay";
>> +};
>> +
>> +&pinctrl_1 {
>> + wlanen: wlanen {
>> + samsung,pins = "gpx2-3";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
>> + samsung,pin-val = <1>;
>> + };
>> +};
>> +
>> &rtc {
>> clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
>> clock-names = "rtc", "rtc_src";
>> --
>> 2.14.1
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
@ 2018-02-04 18:18 ` Michael Lyle
0 siblings, 0 replies; 8+ messages in thread
From: Michael Lyle @ 2018-02-04 18:18 UTC (permalink / raw)
To: linux-arm-kernel
Hi Krzysztof ---
Excellent, thank you for all your help.
Mike
On Sun, Feb 4, 2018 at 8:26 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Thu, Feb 01, 2018 at 01:16:56PM -0800, Michael Lyle wrote:
>> On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
>> it, and turn on the regulator used for it, so that both wifi & bluetooth
>> work.
>>
>> Verified to work on the Artik 520 evaluation board.
>>
>> v2: accidentally sent out v1
>> v3: non-removable instead of broken-cd, alphabetical order, formatting
>
> Changelog should go after --- separator so it would not end in commit.
>
> I'll fix it during applying. Looks good to me. I'll take it after merge
> window.
>
> Best regards,
> Krzysztof
>
>>
>> Signed-off-by: Michael Lyle <mlyle@lyle.org>
>> ---
>> arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> index 0aa577fe9f95..620b50c19ead 100644
>> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> @@ -245,6 +245,7 @@
>> regulator-name = "VLDO23_1.8V";
>> regulator-min-microvolt = <1800000>;
>> regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> };
>>
>> ldo24_reg: LDO24 {
>> @@ -316,6 +317,41 @@
>> status = "okay";
>> };
>>
>> +&mshc_1 {
>> + cap-sd-highspeed;
>> + cap-sdio-irq;
>> + disable-wp;
>> + non-removable;
>> + keep-power-in-suspend;
>> + fifo-depth = <0x40>;
>> + vqmmc-supply = <&ldo11_reg>;
>> + /*
>> + * Voltage negotiation is broken for the SDIO periph so we
>> + * can't actually set the voltage here.
>> + * vmmc-supply = <&ldo23_reg>;
>> + */
>> + card-detect-delay = <500>;
>> + clock-frequency = <100000000>;
>> + max-frequency = <100000000>;
>> + samsung,dw-mshc-ciu-div = <3>;
>> + samsung,dw-mshc-sdr-timing = <0 1>;
>> + samsung,dw-mshc-ddr-timing = <1 2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
>> + bus-width = <4>;
>> + status = "okay";
>> +};
>> +
>> +&pinctrl_1 {
>> + wlanen: wlanen {
>> + samsung,pins = "gpx2-3";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
>> + samsung,pin-val = <1>;
>> + };
>> +};
>> +
>> &rtc {
>> clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
>> clock-names = "rtc", "rtc_src";
>> --
>> 2.14.1
>>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
2018-02-01 21:16 ` Michael Lyle
@ 2018-02-12 18:49 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2018-02-12 18:49 UTC (permalink / raw)
To: Michael Lyle
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, kgene-DgEjT+Ai2ygdnm+yROfE0A,
CHANHO PARK
On Thu, Feb 01, 2018 at 01:16:56PM -0800, Michael Lyle wrote:
> On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
> it, and turn on the regulator used for it, so that both wifi & bluetooth
> work.
>
> Verified to work on the Artik 520 evaluation board.
>
> v2: accidentally sent out v1
> v3: non-removable instead of broken-cd, alphabetical order, formatting
>
> Signed-off-by: Michael Lyle <mlyle-dTEscH1tG2Q@public.gmane.org>
> ---
> arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
Thanks, applied.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
@ 2018-02-12 18:49 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2018-02-12 18:49 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 01, 2018 at 01:16:56PM -0800, Michael Lyle wrote:
> On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
> it, and turn on the regulator used for it, so that both wifi & bluetooth
> work.
>
> Verified to work on the Artik 520 evaluation board.
>
> v2: accidentally sent out v1
> v3: non-removable instead of broken-cd, alphabetical order, formatting
>
> Signed-off-by: Michael Lyle <mlyle@lyle.org>
> ---
> arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-02-12 18:49 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-01 21:16 [PATCH v3] ARM: dts: exynos-artik5: add support for wlan Michael Lyle
2018-02-01 21:16 ` Michael Lyle
[not found] ` <20180201211656.11829-1-mlyle-dTEscH1tG2Q@public.gmane.org>
2018-02-04 16:26 ` Krzysztof Kozlowski
2018-02-04 16:26 ` Krzysztof Kozlowski
2018-02-04 18:18 ` Michael Lyle
2018-02-04 18:18 ` Michael Lyle
2018-02-12 18:49 ` Krzysztof Kozlowski
2018-02-12 18:49 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.