* [Qemu-devel] Virtio-9p and cgroup io-throttling @ 2016-04-07 9:48 Pradeep Kiruvale 2016-04-08 8:10 ` Greg Kurz 0 siblings, 1 reply; 7+ messages in thread From: Pradeep Kiruvale @ 2016-04-07 9:48 UTC (permalink / raw) To: qemu-devel, qemu-discuss [-- Attachment #1: Type: text/plain, Size: 1278 bytes --] Hi All, I am using virtio-9p for sharing the file between host and guest. To test the shared file I do read/write options in the guest.To have controlled io, I am using cgroup blkio. While using cgroup I am facing two issues,Please find the issues below. 1. When I do IO throttling using the cgroup the read throttling works fine but the write throttling does not wok. It still bypasses these throttling control and does the default, am I missing something here? I use the following commands to create VM, share the files and to read/write from guest. *Create vm* qemu-system-x86_64 -balloon none .......-name vm0 -cpu host -m 128 -smp 1 -enable-kvm -parallel .... -fsdev local,id=sdb1,path=/mnt/sdb1,security_model=none,writeout=immediate -device virtio-9p-pci,fsdev=sdb1,mount_tag=sdb1 *Mount file* mount -t 9p -o trans=virtio,version=9p2000.L sdb1 /sdb1_ext4 2>>dd.log && sync touch /sdb1_ext4/dddrive *Write test* dd if=/dev/zero of=/sdb1_ext4/dddrive bs=4k count=800000 oflag=direct >> dd.log 2>&1 && sync *Read test* dd if=/sdb1_ext4/dddrive of=/dev/null >> dd.log 2>&1 && sync 2. The other issue is when I run "dd" command inside guest it creates multiple threads to write/read. I can see those on host using iotop is this expected behavior? Regards, Pradeep [-- Attachment #2: Type: text/html, Size: 1752 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] Virtio-9p and cgroup io-throttling 2016-04-07 9:48 [Qemu-devel] Virtio-9p and cgroup io-throttling Pradeep Kiruvale @ 2016-04-08 8:10 ` Greg Kurz 2016-04-08 9:51 ` Pradeep Kiruvale 0 siblings, 1 reply; 7+ messages in thread From: Greg Kurz @ 2016-04-08 8:10 UTC (permalink / raw) To: Pradeep Kiruvale; +Cc: qemu-devel, qemu-discuss On Thu, 7 Apr 2016 11:48:27 +0200 Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > Hi All, > > I am using virtio-9p for sharing the file between host and guest. To test > the shared file I do read/write options in the guest.To have controlled io, > I am using cgroup blkio. > > While using cgroup I am facing two issues,Please find the issues below. > > 1. When I do IO throttling using the cgroup the read throttling works fine > but the write throttling does not wok. It still bypasses these throttling > control and does the default, am I missing something here? > Hi, Can you provide details on your blkio setup ? > I use the following commands to create VM, share the files and to > read/write from guest. > > *Create vm* > qemu-system-x86_64 -balloon none .......-name vm0 -cpu host -m 128 -smp 1 > -enable-kvm -parallel .... -fsdev > local,id=sdb1,path=/mnt/sdb1,security_model=none,writeout=immediate -device > virtio-9p-pci,fsdev=sdb1,mount_tag=sdb1 > > *Mount file* > mount -t 9p -o trans=virtio,version=9p2000.L sdb1 /sdb1_ext4 2>>dd.log && > sync > > touch /sdb1_ext4/dddrive > > *Write test* > dd if=/dev/zero of=/sdb1_ext4/dddrive bs=4k count=800000 oflag=direct >> > dd.log 2>&1 && sync > > *Read test* > dd if=/sdb1_ext4/dddrive of=/dev/null >> dd.log 2>&1 && sync > > 2. The other issue is when I run "dd" command inside guest it creates > multiple threads to write/read. I can see those on host using iotop is this > expected behavior? > Yes. QEMU uses a thread pool to handle 9p requests. > Regards, > Pradeep Cheers. -- Greg ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] Virtio-9p and cgroup io-throttling 2016-04-08 8:10 ` Greg Kurz @ 2016-04-08 9:51 ` Pradeep Kiruvale 2016-04-08 12:40 ` Greg Kurz 0 siblings, 1 reply; 7+ messages in thread From: Pradeep Kiruvale @ 2016-04-08 9:51 UTC (permalink / raw) To: Greg Kurz; +Cc: qemu-devel, qemu-discuss [-- Attachment #1: Type: text/plain, Size: 2230 bytes --] Hi Greg, Thanks for your reply. Below is the way how I add to blkio echo "8:16 8388608" > /sys/fs/cgroup/blkio/test/blkio.throttle.write_bps_device The problem I guess is adding these task ids to the "tasks" file in cgroup These threads are started randomly and even then I add the PIDs to the tasks file the cgroup still does not do IO control. Is it possible to reduce these number of threads? I see different number of threads doing IO at different runs. Regards, Pradeep On 8 April 2016 at 10:10, Greg Kurz <gkurz@linux.vnet.ibm.com> wrote: > On Thu, 7 Apr 2016 11:48:27 +0200 > Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > > > Hi All, > > > > I am using virtio-9p for sharing the file between host and guest. To test > > the shared file I do read/write options in the guest.To have controlled > io, > > I am using cgroup blkio. > > > > While using cgroup I am facing two issues,Please find the issues below. > > > > 1. When I do IO throttling using the cgroup the read throttling works > fine > > but the write throttling does not wok. It still bypasses these throttling > > control and does the default, am I missing something here? > > > > Hi, > > Can you provide details on your blkio setup ? > > > I use the following commands to create VM, share the files and to > > read/write from guest. > > > > *Create vm* > > qemu-system-x86_64 -balloon none .......-name vm0 -cpu host -m 128 -smp 1 > > -enable-kvm -parallel .... -fsdev > > local,id=sdb1,path=/mnt/sdb1,security_model=none,writeout=immediate > -device > > virtio-9p-pci,fsdev=sdb1,mount_tag=sdb1 > > > > *Mount file* > > mount -t 9p -o trans=virtio,version=9p2000.L sdb1 /sdb1_ext4 2>>dd.log && > > sync > > > > touch /sdb1_ext4/dddrive > > > > *Write test* > > dd if=/dev/zero of=/sdb1_ext4/dddrive bs=4k count=800000 oflag=direct >> > > dd.log 2>&1 && sync > > > > *Read test* > > dd if=/sdb1_ext4/dddrive of=/dev/null >> dd.log 2>&1 && sync > > > > 2. The other issue is when I run "dd" command inside guest it creates > > multiple threads to write/read. I can see those on host using iotop is > this > > expected behavior? > > > > Yes. QEMU uses a thread pool to handle 9p requests. > > > Regards, > > Pradeep > > Cheers. > > -- > Greg > > [-- Attachment #2: Type: text/html, Size: 3286 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] Virtio-9p and cgroup io-throttling 2016-04-08 9:51 ` Pradeep Kiruvale @ 2016-04-08 12:40 ` Greg Kurz 2016-04-08 12:55 ` Pradeep Kiruvale 0 siblings, 1 reply; 7+ messages in thread From: Greg Kurz @ 2016-04-08 12:40 UTC (permalink / raw) To: Pradeep Kiruvale; +Cc: qemu-devel, qemu-discuss On Fri, 8 Apr 2016 11:51:05 +0200 Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > Hi Greg, > > Thanks for your reply. > > Below is the way how I add to blkio > > echo "8:16 8388608" > > /sys/fs/cgroup/blkio/test/blkio.throttle.write_bps_device > Ok, this just puts a limit of 8MB/s when writing to /dev/sdb for all tasks in the test cgroup... but what about the tasks themselves ? > The problem I guess is adding these task ids to the "tasks" file in cgroup > Exactly. :) > These threads are started randomly and even then I add the PIDs to the > tasks file the cgroup still does not do IO control. > How did you get the PIDs ? Are you sure these threads you have added to the cgroup are the ones that write to /dev/sdb ? > Is it possible to reduce these number of threads? I see different number of > threads doing IO at different runs. > AFAIK, no. Why don't you simply start QEMU in the cgroup ? Unless I miss something, all children threads, including the 9p ones, will be in the cgroup and honor the throttle setttings. > Regards, > Pradeep > Cheers. -- Greg > > On 8 April 2016 at 10:10, Greg Kurz <gkurz@linux.vnet.ibm.com> wrote: > > > On Thu, 7 Apr 2016 11:48:27 +0200 > > Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > > > > > Hi All, > > > > > > I am using virtio-9p for sharing the file between host and guest. To test > > > the shared file I do read/write options in the guest.To have controlled > > io, > > > I am using cgroup blkio. > > > > > > While using cgroup I am facing two issues,Please find the issues below. > > > > > > 1. When I do IO throttling using the cgroup the read throttling works > > fine > > > but the write throttling does not wok. It still bypasses these throttling > > > control and does the default, am I missing something here? > > > > > > > Hi, > > > > Can you provide details on your blkio setup ? > > > > > I use the following commands to create VM, share the files and to > > > read/write from guest. > > > > > > *Create vm* > > > qemu-system-x86_64 -balloon none .......-name vm0 -cpu host -m 128 -smp 1 > > > -enable-kvm -parallel .... -fsdev > > > local,id=sdb1,path=/mnt/sdb1,security_model=none,writeout=immediate > > -device > > > virtio-9p-pci,fsdev=sdb1,mount_tag=sdb1 > > > > > > *Mount file* > > > mount -t 9p -o trans=virtio,version=9p2000.L sdb1 /sdb1_ext4 2>>dd.log && > > > sync > > > > > > touch /sdb1_ext4/dddrive > > > > > > *Write test* > > > dd if=/dev/zero of=/sdb1_ext4/dddrive bs=4k count=800000 oflag=direct >> > > > dd.log 2>&1 && sync > > > > > > *Read test* > > > dd if=/sdb1_ext4/dddrive of=/dev/null >> dd.log 2>&1 && sync > > > > > > 2. The other issue is when I run "dd" command inside guest it creates > > > multiple threads to write/read. I can see those on host using iotop is > > this > > > expected behavior? > > > > > > > Yes. QEMU uses a thread pool to handle 9p requests. > > > > > Regards, > > > Pradeep > > > > Cheers. > > > > -- > > Greg > > > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] Virtio-9p and cgroup io-throttling 2016-04-08 12:40 ` Greg Kurz @ 2016-04-08 12:55 ` Pradeep Kiruvale 2016-04-08 14:58 ` Greg Kurz 0 siblings, 1 reply; 7+ messages in thread From: Pradeep Kiruvale @ 2016-04-08 12:55 UTC (permalink / raw) To: Greg Kurz; +Cc: qemu-devel, qemu-discuss [-- Attachment #1: Type: text/plain, Size: 3304 bytes --] Hi Greg, FInd my replies inline > > > Below is the way how I add to blkio > > > > echo "8:16 8388608" > > > /sys/fs/cgroup/blkio/test/blkio.throttle.write_bps_device > > > > Ok, this just puts a limit of 8MB/s when writing to /dev/sdb for all > tasks in the test cgroup... but what about the tasks themselves ? > > > The problem I guess is adding these task ids to the "tasks" file in > cgroup > > > > Exactly. :) > > > These threads are started randomly and even then I add the PIDs to the > > tasks file the cgroup still does not do IO control. > > > > How did you get the PIDs ? Are you sure these threads you have added to the > cgroup are the ones that write to /dev/sdb ? > *Yes, I get PIDs from /proc/Qemu_PID/task* > > > Is it possible to reduce these number of threads? I see different number > of > > threads doing IO at different runs. > > > > AFAIK, no. > > Why don't you simply start QEMU in the cgroup ? Unless I miss something, > all > children threads, including the 9p ones, will be in the cgroup and honor > the > throttle setttings. > *I started the qemu with cgroup as below* *cgexec -g blkio:/test qemu.......* *Is there any other way of starting the qemu in cgroup?* Regards, Pradeep > > > Regards, > > Pradeep > > > > Cheers. > > -- > Greg > > > > > On 8 April 2016 at 10:10, Greg Kurz <gkurz@linux.vnet.ibm.com> wrote: > > > > > On Thu, 7 Apr 2016 11:48:27 +0200 > > > Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > > > > > > > Hi All, > > > > > > > > I am using virtio-9p for sharing the file between host and guest. To > test > > > > the shared file I do read/write options in the guest.To have > controlled > > > io, > > > > I am using cgroup blkio. > > > > > > > > While using cgroup I am facing two issues,Please find the issues > below. > > > > > > > > 1. When I do IO throttling using the cgroup the read throttling works > > > fine > > > > but the write throttling does not wok. It still bypasses these > throttling > > > > control and does the default, am I missing something here? > > > > > > > > > > Hi, > > > > > > Can you provide details on your blkio setup ? > > > > > > > I use the following commands to create VM, share the files and to > > > > read/write from guest. > > > > > > > > *Create vm* > > > > qemu-system-x86_64 -balloon none .......-name vm0 -cpu host -m 128 > -smp 1 > > > > -enable-kvm -parallel .... -fsdev > > > > local,id=sdb1,path=/mnt/sdb1,security_model=none,writeout=immediate > > > -device > > > > virtio-9p-pci,fsdev=sdb1,mount_tag=sdb1 > > > > > > > > *Mount file* > > > > mount -t 9p -o trans=virtio,version=9p2000.L sdb1 /sdb1_ext4 > 2>>dd.log && > > > > sync > > > > > > > > touch /sdb1_ext4/dddrive > > > > > > > > *Write test* > > > > dd if=/dev/zero of=/sdb1_ext4/dddrive bs=4k count=800000 > oflag=direct >> > > > > dd.log 2>&1 && sync > > > > > > > > *Read test* > > > > dd if=/sdb1_ext4/dddrive of=/dev/null >> dd.log 2>&1 && sync > > > > > > > > 2. The other issue is when I run "dd" command inside guest it > creates > > > > multiple threads to write/read. I can see those on host using iotop > is > > > this > > > > expected behavior? > > > > > > > > > > Yes. QEMU uses a thread pool to handle 9p requests. > > > > > > > Regards, > > > > Pradeep > > > > > > Cheers. > > > > > > -- > > > Greg > > > > > > > > [-- Attachment #2: Type: text/html, Size: 5165 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] Virtio-9p and cgroup io-throttling 2016-04-08 12:55 ` Pradeep Kiruvale @ 2016-04-08 14:58 ` Greg Kurz 2016-04-11 14:18 ` Pradeep Kiruvale 0 siblings, 1 reply; 7+ messages in thread From: Greg Kurz @ 2016-04-08 14:58 UTC (permalink / raw) To: Pradeep Kiruvale; +Cc: qemu-devel, qemu-discuss On Fri, 8 Apr 2016 14:55:29 +0200 Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > Hi Greg, > > FInd my replies inline > > > > > > Below is the way how I add to blkio > > > > > > echo "8:16 8388608" > > > > /sys/fs/cgroup/blkio/test/blkio.throttle.write_bps_device > > > > > > > Ok, this just puts a limit of 8MB/s when writing to /dev/sdb for all > > tasks in the test cgroup... but what about the tasks themselves ? > > > > > The problem I guess is adding these task ids to the "tasks" file in > > cgroup > > > > > > > Exactly. :) > > > > > These threads are started randomly and even then I add the PIDs to the > > > tasks file the cgroup still does not do IO control. > > > > > > > How did you get the PIDs ? Are you sure these threads you have added to the > > cgroup are the ones that write to /dev/sdb ? > > > > *Yes, I get PIDs from /proc/Qemu_PID/task* > And then you echoed the PIDs to /sys/fs/cgroup/blkio/test/tasks ? This is racy... another IO thread may be started to do some work on /dev/sdb just after you've read PIDs from /proc/Qemu_PID/task, and it won't be part of the cgroup. > > > > > > > Is it possible to reduce these number of threads? I see different number > > of > > > threads doing IO at different runs. > > > > > > > AFAIK, no. > > > > Why don't you simply start QEMU in the cgroup ? Unless I miss something, > > all > > children threads, including the 9p ones, will be in the cgroup and honor > > the > > throttle setttings. > > > > > *I started the qemu with cgroup as below* > > *cgexec -g blkio:/test qemu.......* > *Is there any other way of starting the qemu in cgroup?* > Maybe you can pass --sticky to cgexec to prevent cgred from moving children tasks to other cgroups... There's also the old fashion method: # echo $$ > /sys/fs/cgroup/blkio/test/tasks # qemu..... This being said, QEMU is a regular userspace program that is completely cgroup agnostic. It won't behave differently than 'dd if=/dev/sdb of=/dev/null'. This really doesn't look like a QEMU related issue to me. > Regards, > Pradeep > Cheers. -- Greg > > > > > > Regards, > > > Pradeep > > > > > > > Cheers. > > > > -- > > Greg > > > > > > > > On 8 April 2016 at 10:10, Greg Kurz <gkurz@linux.vnet.ibm.com> wrote: > > > > > > > On Thu, 7 Apr 2016 11:48:27 +0200 > > > > Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > > > > > > > > > Hi All, > > > > > > > > > > I am using virtio-9p for sharing the file between host and guest. To > > test > > > > > the shared file I do read/write options in the guest.To have > > controlled > > > > io, > > > > > I am using cgroup blkio. > > > > > > > > > > While using cgroup I am facing two issues,Please find the issues > > below. > > > > > > > > > > 1. When I do IO throttling using the cgroup the read throttling works > > > > fine > > > > > but the write throttling does not wok. It still bypasses these > > throttling > > > > > control and does the default, am I missing something here? > > > > > > > > > > > > > Hi, > > > > > > > > Can you provide details on your blkio setup ? > > > > > > > > > I use the following commands to create VM, share the files and to > > > > > read/write from guest. > > > > > > > > > > *Create vm* > > > > > qemu-system-x86_64 -balloon none .......-name vm0 -cpu host -m 128 > > -smp 1 > > > > > -enable-kvm -parallel .... -fsdev > > > > > local,id=sdb1,path=/mnt/sdb1,security_model=none,writeout=immediate > > > > -device > > > > > virtio-9p-pci,fsdev=sdb1,mount_tag=sdb1 > > > > > > > > > > *Mount file* > > > > > mount -t 9p -o trans=virtio,version=9p2000.L sdb1 /sdb1_ext4 > > 2>>dd.log && > > > > > sync > > > > > > > > > > touch /sdb1_ext4/dddrive > > > > > > > > > > *Write test* > > > > > dd if=/dev/zero of=/sdb1_ext4/dddrive bs=4k count=800000 > > oflag=direct >> > > > > > dd.log 2>&1 && sync > > > > > > > > > > *Read test* > > > > > dd if=/sdb1_ext4/dddrive of=/dev/null >> dd.log 2>&1 && sync > > > > > > > > > > 2. The other issue is when I run "dd" command inside guest it > > creates > > > > > multiple threads to write/read. I can see those on host using iotop > > is > > > > this > > > > > expected behavior? > > > > > > > > > > > > > Yes. QEMU uses a thread pool to handle 9p requests. > > > > > > > > > Regards, > > > > > Pradeep > > > > > > > > Cheers. > > > > > > > > -- > > > > Greg > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Qemu-devel] Virtio-9p and cgroup io-throttling 2016-04-08 14:58 ` Greg Kurz @ 2016-04-11 14:18 ` Pradeep Kiruvale 0 siblings, 0 replies; 7+ messages in thread From: Pradeep Kiruvale @ 2016-04-11 14:18 UTC (permalink / raw) To: Greg Kurz; +Cc: qemu-devel, qemu-discuss [-- Attachment #1: Type: text/plain, Size: 4947 bytes --] Hi Greg, Yes, it was nothing to do with the virtio-9p. I was writing at 4k Blocks now I changed it to 1K Block. This works fine for me. Thanks for your help. Regards, Pradeep On 8 April 2016 at 16:58, Greg Kurz <gkurz@linux.vnet.ibm.com> wrote: > On Fri, 8 Apr 2016 14:55:29 +0200 > Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > > > Hi Greg, > > > > FInd my replies inline > > > > > > > > > Below is the way how I add to blkio > > > > > > > > echo "8:16 8388608" > > > > > /sys/fs/cgroup/blkio/test/blkio.throttle.write_bps_device > > > > > > > > > > Ok, this just puts a limit of 8MB/s when writing to /dev/sdb for all > > > tasks in the test cgroup... but what about the tasks themselves ? > > > > > > > The problem I guess is adding these task ids to the "tasks" file in > > > cgroup > > > > > > > > > > Exactly. :) > > > > > > > These threads are started randomly and even then I add the PIDs to > the > > > > tasks file the cgroup still does not do IO control. > > > > > > > > > > How did you get the PIDs ? Are you sure these threads you have added > to the > > > cgroup are the ones that write to /dev/sdb ? > > > > > > > *Yes, I get PIDs from /proc/Qemu_PID/task* > > > > And then you echoed the PIDs to /sys/fs/cgroup/blkio/test/tasks ? > > This is racy... another IO thread may be started to do some work on > /dev/sdb > just after you've read PIDs from /proc/Qemu_PID/task, and it won't be part > of the cgroup. > > > > > > > > > > > > Is it possible to reduce these number of threads? I see different > number > > > of > > > > threads doing IO at different runs. > > > > > > > > > > AFAIK, no. > > > > > > Why don't you simply start QEMU in the cgroup ? Unless I miss > something, > > > all > > > children threads, including the 9p ones, will be in the cgroup and > honor > > > the > > > throttle setttings. > > > > > > > > > *I started the qemu with cgroup as below* > > > > *cgexec -g blkio:/test qemu.......* > > *Is there any other way of starting the qemu in cgroup?* > > > > Maybe you can pass --sticky to cgexec to prevent cgred from moving > children tasks to other cgroups... > > There's also the old fashion method: > > # echo $$ > /sys/fs/cgroup/blkio/test/tasks > # qemu..... > > This being said, QEMU is a regular userspace program that is completely > cgroup > agnostic. It won't behave differently than 'dd if=/dev/sdb of=/dev/null'. > > This really doesn't look like a QEMU related issue to me. > > > Regards, > > Pradeep > > > > Cheers. > > -- > Greg > > > > > > > > > > Regards, > > > > Pradeep > > > > > > > > > > Cheers. > > > > > > -- > > > Greg > > > > > > > > > > > On 8 April 2016 at 10:10, Greg Kurz <gkurz@linux.vnet.ibm.com> > wrote: > > > > > > > > > On Thu, 7 Apr 2016 11:48:27 +0200 > > > > > Pradeep Kiruvale <pradeepkiruvale@gmail.com> wrote: > > > > > > > > > > > Hi All, > > > > > > > > > > > > I am using virtio-9p for sharing the file between host and > guest. To > > > test > > > > > > the shared file I do read/write options in the guest.To have > > > controlled > > > > > io, > > > > > > I am using cgroup blkio. > > > > > > > > > > > > While using cgroup I am facing two issues,Please find the issues > > > below. > > > > > > > > > > > > 1. When I do IO throttling using the cgroup the read throttling > works > > > > > fine > > > > > > but the write throttling does not wok. It still bypasses these > > > throttling > > > > > > control and does the default, am I missing something here? > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > Can you provide details on your blkio setup ? > > > > > > > > > > > I use the following commands to create VM, share the files and to > > > > > > read/write from guest. > > > > > > > > > > > > *Create vm* > > > > > > qemu-system-x86_64 -balloon none .......-name vm0 -cpu host -m > 128 > > > -smp 1 > > > > > > -enable-kvm -parallel .... -fsdev > > > > > > > local,id=sdb1,path=/mnt/sdb1,security_model=none,writeout=immediate > > > > > -device > > > > > > virtio-9p-pci,fsdev=sdb1,mount_tag=sdb1 > > > > > > > > > > > > *Mount file* > > > > > > mount -t 9p -o trans=virtio,version=9p2000.L sdb1 /sdb1_ext4 > > > 2>>dd.log && > > > > > > sync > > > > > > > > > > > > touch /sdb1_ext4/dddrive > > > > > > > > > > > > *Write test* > > > > > > dd if=/dev/zero of=/sdb1_ext4/dddrive bs=4k count=800000 > > > oflag=direct >> > > > > > > dd.log 2>&1 && sync > > > > > > > > > > > > *Read test* > > > > > > dd if=/sdb1_ext4/dddrive of=/dev/null >> dd.log 2>&1 && sync > > > > > > > > > > > > 2. The other issue is when I run "dd" command inside guest it > > > creates > > > > > > multiple threads to write/read. I can see those on host using > iotop > > > is > > > > > this > > > > > > expected behavior? > > > > > > > > > > > > > > > > Yes. QEMU uses a thread pool to handle 9p requests. > > > > > > > > > > > Regards, > > > > > > Pradeep > > > > > > > > > > Cheers. > > > > > > > > > > -- > > > > > Greg > > > > > > > > > > > > > > > > > > > [-- Attachment #2: Type: text/html, Size: 7562 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-04-11 14:19 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-04-07 9:48 [Qemu-devel] Virtio-9p and cgroup io-throttling Pradeep Kiruvale 2016-04-08 8:10 ` Greg Kurz 2016-04-08 9:51 ` Pradeep Kiruvale 2016-04-08 12:40 ` Greg Kurz 2016-04-08 12:55 ` Pradeep Kiruvale 2016-04-08 14:58 ` Greg Kurz 2016-04-11 14:18 ` Pradeep Kiruvale
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.