* [PATCH userspace v4 1/8] label_file: fix a data race
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 2/8] selinux_restorecon: simplify fl_head allocation by using calloc() Ondrej Mosnacek
` (7 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux
The 'matches' member of 'struct spec' may be written to by different
threads, so it needs to be accessed using the proper atomic constructs.
Since the actual count of matches doesn't matter and is not used,
convert this field to a bool and just atomically set/read it using GCC
__atomic builtins (which are already being used in another place).
If the compiler lacks support for __atomic builtins (which seem to have
been introduced in GCC 4.1), just fail the compilation. I don't think
it's worth tryin to invent a workaround to support a 15 years old
compiler.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
libselinux/src/label_file.c | 15 +++++++++++++--
libselinux/src/label_file.h | 2 +-
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/libselinux/src/label_file.c b/libselinux/src/label_file.c
index 2e28d047..74ae9b9f 100644
--- a/libselinux/src/label_file.c
+++ b/libselinux/src/label_file.c
@@ -951,7 +951,12 @@ static struct spec **lookup_all(struct selabel_handle *rec,
rc = regex_match(spec->regex, key, partial);
if (rc == REGEX_MATCH || (partial && rc == REGEX_MATCH_PARTIAL)) {
if (rc == REGEX_MATCH) {
- spec->matches++;
+#ifdef __ATOMIC_RELAXED
+ __atomic_store_n(&spec->any_matches,
+ true, __ATOMIC_RELAXED);
+#else
+#error "Please use a compiler that supports __atomic builtins"
+#endif
}
if (strcmp(spec_arr[i].lr.ctx_raw, "<<none>>") == 0) {
@@ -1249,9 +1254,15 @@ static void stats(struct selabel_handle *rec)
struct saved_data *data = (struct saved_data *)rec->data;
unsigned int i, nspec = data->nspec;
struct spec *spec_arr = data->spec_arr;
+ bool any_matches;
for (i = 0; i < nspec; i++) {
- if (spec_arr[i].matches == 0) {
+#ifdef __ATOMIC_RELAXED
+ any_matches = __atomic_load_n(&spec_arr[i].any_matches, __ATOMIC_RELAXED);
+#else
+#error "Please use a compiler that supports __atomic builtins"
+#endif
+ if (!any_matches) {
if (spec_arr[i].type_str) {
COMPAT_LOG(SELINUX_WARNING,
"Warning! No matches for (%s, %s, %s)\n",
diff --git a/libselinux/src/label_file.h b/libselinux/src/label_file.h
index 343ffc70..b453e13f 100644
--- a/libselinux/src/label_file.h
+++ b/libselinux/src/label_file.h
@@ -51,7 +51,7 @@ struct spec {
bool regex_compiled; /* bool to indicate if the regex is compiled */
pthread_mutex_t regex_lock; /* lock for lazy compilation of regex */
mode_t mode; /* mode format value */
- int matches; /* number of matching pathnames */
+ bool any_matches; /* did any pathname match? */
int stem_id; /* indicates which stem-compression item */
char hasMetaChars; /* regular expression has meta-chars */
char from_mmap; /* this spec is from an mmap of the data */
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH userspace v4 2/8] selinux_restorecon: simplify fl_head allocation by using calloc()
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 1/8] label_file: fix a data race Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 3/8] selinux_restorecon: protect file_spec list with a mutex Ondrej Mosnacek
` (6 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
libselinux/src/selinux_restorecon.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/libselinux/src/selinux_restorecon.c b/libselinux/src/selinux_restorecon.c
index 04d95650..15129336 100644
--- a/libselinux/src/selinux_restorecon.c
+++ b/libselinux/src/selinux_restorecon.c
@@ -425,10 +425,9 @@ static int filespec_add(ino_t ino, const char *con, const char *file,
struct stat64 sb;
if (!fl_head) {
- fl_head = malloc(sizeof(file_spec_t) * HASH_BUCKETS);
+ fl_head = calloc(HASH_BUCKETS, sizeof(file_spec_t));
if (!fl_head)
goto oom;
- memset(fl_head, 0, sizeof(file_spec_t) * HASH_BUCKETS);
}
h = (ino + (ino >> HASH_BITS)) & HASH_MASK;
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH userspace v4 3/8] selinux_restorecon: protect file_spec list with a mutex
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 1/8] label_file: fix a data race Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 2/8] selinux_restorecon: simplify fl_head allocation by using calloc() Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 4/8] libselinux: make selinux_log() thread-safe Ondrej Mosnacek
` (5 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux
Not very useful on its own, but will allow to implement a parallel
version of selinux_restorecon() in subsequent patches.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
libselinux/src/selinux_restorecon.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/libselinux/src/selinux_restorecon.c b/libselinux/src/selinux_restorecon.c
index 15129336..732f0ccc 100644
--- a/libselinux/src/selinux_restorecon.c
+++ b/libselinux/src/selinux_restorecon.c
@@ -411,6 +411,7 @@ typedef struct file_spec {
} file_spec_t;
static file_spec_t *fl_head;
+static pthread_mutex_t fl_mutex = PTHREAD_MUTEX_INITIALIZER;
/*
* Try to add an association between an inode and a context. If there is a
@@ -424,6 +425,8 @@ static int filespec_add(ino_t ino, const char *con, const char *file,
int h, ret;
struct stat64 sb;
+ __pthread_mutex_lock(&fl_mutex);
+
if (!fl_head) {
fl_head = calloc(HASH_BUCKETS, sizeof(file_spec_t));
if (!fl_head)
@@ -444,11 +447,11 @@ static int filespec_add(ino_t ino, const char *con, const char *file,
fl->con = strdup(con);
if (!fl->con)
goto oom;
- return 1;
+ goto unlock_1;
}
if (strcmp(fl->con, con) == 0)
- return 1;
+ goto unlock_1;
selinux_log(SELINUX_ERROR,
"conflicting specifications for %s and %s, using %s.\n",
@@ -457,6 +460,9 @@ static int filespec_add(ino_t ino, const char *con, const char *file,
fl->file = strdup(file);
if (!fl->file)
goto oom;
+
+ __pthread_mutex_unlock(&fl_mutex);
+
if (flags->conflicterror) {
selinux_log(SELINUX_ERROR,
"treating conflicting specifications as an error.\n");
@@ -481,13 +487,19 @@ static int filespec_add(ino_t ino, const char *con, const char *file,
goto oom_freefl;
fl->next = prevfl->next;
prevfl->next = fl;
+
+ __pthread_mutex_unlock(&fl_mutex);
return 0;
oom_freefl:
free(fl);
oom:
+ __pthread_mutex_unlock(&fl_mutex);
selinux_log(SELINUX_ERROR, "%s: Out of memory\n", __func__);
return -1;
+unlock_1:
+ __pthread_mutex_unlock(&fl_mutex);
+ return 1;
}
/*
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH userspace v4 4/8] libselinux: make selinux_log() thread-safe
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
` (2 preceding siblings ...)
2021-10-26 11:52 ` [PATCH userspace v4 3/8] selinux_restorecon: protect file_spec list with a mutex Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 5/8] libselinux: make is_context_customizable() thread-safe Ondrej Mosnacek
` (4 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux
Ensure that selinux_log() is thread-safe by guarding the call to the
underlying callback with a mutex.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
libselinux/src/callbacks.c | 8 +++++---
libselinux/src/callbacks.h | 13 ++++++++++++-
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/libselinux/src/callbacks.c b/libselinux/src/callbacks.c
index c18ccc54..469c4055 100644
--- a/libselinux/src/callbacks.c
+++ b/libselinux/src/callbacks.c
@@ -10,6 +10,8 @@
#include <selinux/selinux.h>
#include "callbacks.h"
+pthread_mutex_t log_mutex = PTHREAD_MUTEX_INITIALIZER;
+
/* default implementations */
static int __attribute__ ((format(printf, 2, 3)))
default_selinux_log(int type __attribute__((unused)), const char *fmt, ...)
@@ -56,7 +58,7 @@ default_selinux_policyload(int seqno __attribute__((unused)))
/* callback pointers */
int __attribute__ ((format(printf, 2, 3)))
-(*selinux_log)(int, const char *, ...) =
+(*selinux_log_direct)(int, const char *, ...) =
default_selinux_log;
int
@@ -81,7 +83,7 @@ selinux_set_callback(int type, union selinux_callback cb)
{
switch (type) {
case SELINUX_CB_LOG:
- selinux_log = cb.func_log;
+ selinux_log_direct = cb.func_log;
break;
case SELINUX_CB_AUDIT:
selinux_audit = cb.func_audit;
@@ -106,7 +108,7 @@ selinux_get_callback(int type)
switch (type) {
case SELINUX_CB_LOG:
- cb.func_log = selinux_log;
+ cb.func_log = selinux_log_direct;
break;
case SELINUX_CB_AUDIT:
cb.func_audit = selinux_audit;
diff --git a/libselinux/src/callbacks.h b/libselinux/src/callbacks.h
index 03d87f0c..f4dab157 100644
--- a/libselinux/src/callbacks.h
+++ b/libselinux/src/callbacks.h
@@ -10,9 +10,11 @@
#include <string.h>
#include <selinux/selinux.h>
+#include "selinux_internal.h"
+
/* callback pointers */
extern int __attribute__ ((format(printf, 2, 3)))
-(*selinux_log) (int type, const char *, ...) ;
+(*selinux_log_direct) (int type, const char *, ...) ;
extern int
(*selinux_audit) (void *, security_class_t, char *, size_t) ;
@@ -26,4 +28,13 @@ extern int
extern int
(*selinux_netlink_policyload) (int seqno) ;
+/* Thread-safe selinux_log() function */
+extern pthread_mutex_t log_mutex;
+
+#define selinux_log(type, ...) do { \
+ __pthread_mutex_lock(&log_mutex); \
+ selinux_log_direct(type, __VA_ARGS__); \
+ __pthread_mutex_unlock(&log_mutex); \
+} while(0)
+
#endif /* _SELINUX_CALLBACKS_H_ */
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH userspace v4 5/8] libselinux: make is_context_customizable() thread-safe
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
` (3 preceding siblings ...)
2021-10-26 11:52 ` [PATCH userspace v4 4/8] libselinux: make selinux_log() thread-safe Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-11-05 15:32 ` Christian Göttsche
2021-10-26 11:52 ` [PATCH userspace v4 6/8] selinux_restorecon: add a global mutex to synchronize progress output Ondrej Mosnacek
` (3 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux; +Cc: Christian Göttsche
Use the __selinux_once() macro to ensure that threads don't race to
initialize the list of customizable types.
Reported-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
libselinux/src/is_customizable_type.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/libselinux/src/is_customizable_type.c b/libselinux/src/is_customizable_type.c
index 1b17860c..f83e1e83 100644
--- a/libselinux/src/is_customizable_type.c
+++ b/libselinux/src/is_customizable_type.c
@@ -9,7 +9,10 @@
#include "selinux_internal.h"
#include "context_internal.h"
-static int get_customizable_type_list(char *** retlist)
+static char **customizable_list = NULL;
+static pthread_once_t customizable_once = PTHREAD_ONCE_INIT;
+
+static void customizable_init(void)
{
FILE *fp;
char *buf;
@@ -18,12 +21,12 @@ static int get_customizable_type_list(char *** retlist)
fp = fopen(selinux_customizable_types_path(), "re");
if (!fp)
- return -1;
+ return;
buf = malloc(selinux_page_size);
if (!buf) {
fclose(fp);
- return -1;
+ return;
}
while (fgets_unlocked(buf, selinux_page_size, fp) && ctr < UINT_MAX) {
ctr++;
@@ -54,23 +57,19 @@ static int get_customizable_type_list(char *** retlist)
fclose(fp);
free(buf);
if (!list)
- return -1;
- *retlist = list;
- return 0;
+ return;
+ customizable_list = list;
}
-static char **customizable_list = NULL;
-
int is_context_customizable(const char * scontext)
{
int i;
const char *type;
context_t c;
- if (!customizable_list) {
- if (get_customizable_type_list(&customizable_list) != 0)
- return -1;
- }
+ __selinux_once(customizable_once, customizable_init);
+ if (!customizable_list)
+ return -1;
c = context_new(scontext);
if (!c)
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH userspace v4 5/8] libselinux: make is_context_customizable() thread-safe
2021-10-26 11:52 ` [PATCH userspace v4 5/8] libselinux: make is_context_customizable() thread-safe Ondrej Mosnacek
@ 2021-11-05 15:32 ` Christian Göttsche
0 siblings, 0 replies; 13+ messages in thread
From: Christian Göttsche @ 2021-11-05 15:32 UTC (permalink / raw)
To: Ondrej Mosnacek; +Cc: SElinux list
On Tue, 26 Oct 2021 at 13:52, Ondrej Mosnacek <omosnace@redhat.com> wrote:
>
> Use the __selinux_once() macro to ensure that threads don't race to
> initialize the list of customizable types.
>
> Reported-by: Christian Göttsche <cgzones@googlemail.com>
> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
> ---
> libselinux/src/is_customizable_type.c | 23 +++++++++++------------
> 1 file changed, 11 insertions(+), 12 deletions(-)
>
Tested-by: Christian Göttsche <cgzones@googlemail.com>
Found no further thread sanitizer issues while testing.
> diff --git a/libselinux/src/is_customizable_type.c b/libselinux/src/is_customizable_type.c
> index 1b17860c..f83e1e83 100644
> --- a/libselinux/src/is_customizable_type.c
> +++ b/libselinux/src/is_customizable_type.c
> @@ -9,7 +9,10 @@
> #include "selinux_internal.h"
> #include "context_internal.h"
>
> -static int get_customizable_type_list(char *** retlist)
> +static char **customizable_list = NULL;
> +static pthread_once_t customizable_once = PTHREAD_ONCE_INIT;
> +
> +static void customizable_init(void)
> {
> FILE *fp;
> char *buf;
> @@ -18,12 +21,12 @@ static int get_customizable_type_list(char *** retlist)
>
> fp = fopen(selinux_customizable_types_path(), "re");
> if (!fp)
> - return -1;
> + return;
>
> buf = malloc(selinux_page_size);
> if (!buf) {
> fclose(fp);
> - return -1;
> + return;
> }
> while (fgets_unlocked(buf, selinux_page_size, fp) && ctr < UINT_MAX) {
> ctr++;
> @@ -54,23 +57,19 @@ static int get_customizable_type_list(char *** retlist)
> fclose(fp);
> free(buf);
> if (!list)
> - return -1;
> - *retlist = list;
> - return 0;
> + return;
> + customizable_list = list;
> }
>
> -static char **customizable_list = NULL;
> -
> int is_context_customizable(const char * scontext)
> {
> int i;
> const char *type;
> context_t c;
>
> - if (!customizable_list) {
> - if (get_customizable_type_list(&customizable_list) != 0)
> - return -1;
> - }
> + __selinux_once(customizable_once, customizable_init);
> + if (!customizable_list)
> + return -1;
>
> c = context_new(scontext);
> if (!c)
> --
> 2.31.1
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH userspace v4 6/8] selinux_restorecon: add a global mutex to synchronize progress output
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
` (4 preceding siblings ...)
2021-10-26 11:52 ` [PATCH userspace v4 5/8] libselinux: make is_context_customizable() thread-safe Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 7/8] selinux_restorecon: introduce selinux_restorecon_parallel(3) Ondrej Mosnacek
` (2 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux
Another small incremental change to pave the way for a parallel
selinux_restorecon() function.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
libselinux/src/selinux_restorecon.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/libselinux/src/selinux_restorecon.c b/libselinux/src/selinux_restorecon.c
index 732f0ccc..252b775f 100644
--- a/libselinux/src/selinux_restorecon.c
+++ b/libselinux/src/selinux_restorecon.c
@@ -60,6 +60,7 @@ static int exclude_count = 0;
static struct edir *exclude_lst = NULL;
static uint64_t fc_count = 0; /* Number of files processed so far */
static uint64_t efile_count; /* Estimated total number of files */
+static pthread_mutex_t progress_mutex = PTHREAD_MUTEX_INITIALIZER;
/* Store information on directories with xattr's. */
static struct dir_xattr *dir_xattr_list;
@@ -647,6 +648,7 @@ static int restorecon_sb(const char *pathname, const struct stat *sb,
}
if (flags->progress) {
+ __pthread_mutex_lock(&progress_mutex);
fc_count++;
if (fc_count % STAR_COUNT == 0) {
if (flags->mass_relabel && efile_count > 0) {
@@ -658,6 +660,7 @@ static int restorecon_sb(const char *pathname, const struct stat *sb,
}
fflush(stdout);
}
+ __pthread_mutex_unlock(&progress_mutex);
}
if (flags->add_assoc) {
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH userspace v4 7/8] selinux_restorecon: introduce selinux_restorecon_parallel(3)
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
` (5 preceding siblings ...)
2021-10-26 11:52 ` [PATCH userspace v4 6/8] selinux_restorecon: add a global mutex to synchronize progress output Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-10-26 11:52 ` [PATCH userspace v4 8/8] setfiles/restorecon: support parallel relabeling Ondrej Mosnacek
2021-11-22 11:56 ` [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
8 siblings, 0 replies; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux
Refactor selinux_restorecon(3) to allow for distributing the relabeling
to multiple threads and add a new function
selinux_restorecon_parallel(3), which allows specifying the number of
threads to use. The existing selinux_restorecon(3) function maintains
the same interface and maintains the same behavior (i.e. relabeling is
done on a single thread).
The parallel implementation takes a simple approach of performing all
the directory tree traversal in a critical section and only letting the
relabeling of individual objects run in parallel. Thankfully, this
approach turns out to be efficient enough in practice, as shown by
restorecon benchmarks (detailed in a subsequent patch that switches
setfiles & restorecon to use selinux_restorecon_parallel(3)).
Note that to be able to use the parallelism, the calling application/
library must be explicitly linked to the libpthread library (statically
or dynamically). This is necessary to mantain the requirement that
libselinux shouldn't explicitly link with libpthread. (I don't know what
exactly was the reason behind this requirement as the commit logs are
fuzzy, but special care has been taken in the past to maintain it, so I
didn't want to break it...)
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
libselinux/include/selinux/restorecon.h | 14 +
libselinux/man/man3/selinux_restorecon.3 | 29 ++
.../man/man3/selinux_restorecon_parallel.3 | 1 +
libselinux/src/libselinux.map | 5 +
libselinux/src/selinux_internal.h | 16 +
libselinux/src/selinux_restorecon.c | 436 ++++++++++++------
libselinux/src/selinuxswig_python.i | 6 +-
libselinux/src/selinuxswig_python_exception.i | 8 +
8 files changed, 368 insertions(+), 147 deletions(-)
create mode 100644 libselinux/man/man3/selinux_restorecon_parallel.3
diff --git a/libselinux/include/selinux/restorecon.h b/libselinux/include/selinux/restorecon.h
index 466de39a..1821a3dc 100644
--- a/libselinux/include/selinux/restorecon.h
+++ b/libselinux/include/selinux/restorecon.h
@@ -2,6 +2,7 @@
#define _RESTORECON_H_
#include <sys/types.h>
+#include <stddef.h>
#include <stdarg.h>
#ifdef __cplusplus
@@ -23,6 +24,19 @@ extern "C" {
*/
extern int selinux_restorecon(const char *pathname,
unsigned int restorecon_flags);
+/**
+ * selinux_restorecon_parallel - Relabel files, optionally use more threads.
+ * @pathname: specifies file/directory to relabel.
+ * @restorecon_flags: specifies the actions to be performed when relabeling.
+ * @nthreads: specifies the number of threads to use (0 = use number of CPUs
+ * currently online)
+ *
+ * Same as selinux_restorecon(3), but allows to use multiple threads to do
+ * the work.
+ */
+extern int selinux_restorecon_parallel(const char *pathname,
+ unsigned int restorecon_flags,
+ size_t nthreads);
/*
* restorecon_flags options
*/
diff --git a/libselinux/man/man3/selinux_restorecon.3 b/libselinux/man/man3/selinux_restorecon.3
index ad637406..334d2930 100644
--- a/libselinux/man/man3/selinux_restorecon.3
+++ b/libselinux/man/man3/selinux_restorecon.3
@@ -11,6 +11,14 @@ selinux_restorecon \- restore file(s) default SELinux security contexts
.br
.BI "unsigned int " restorecon_flags ");"
.in
+.sp
+.BI "int selinux_restorecon_parallel(const char *" pathname ,
+.in +\w'int selinux_restorecon_parallel('u
+.br
+.BI "unsigned int " restorecon_flags ","
+.br
+.BI "size_t " nthreads ");"
+.in
.
.SH "DESCRIPTION"
.BR selinux_restorecon ()
@@ -187,6 +195,27 @@ unless the
.B SELINUX_RESTORECON_IGNORE_MOUNTS
flag has been set.
.RE
+.sp
+.BR selinux_restorecon_parallel()
+is similar to
+.BR selinux_restorecon (3),
+but accepts another parameter that allows to run relabeling over multiple
+threads:
+.sp
+.RS
+.IR nthreads
+specifies the number of threads to use during relabeling. When set to 1,
+the behavior is the same as calling
+.BR selinux_restorecon (3).
+When set to 0, the function will try to use as many threads as there are
+online CPU cores. When set to any other number, the function will try to use
+the given number of threads.
+.sp
+Note that to use the parallel relabeling capability, the calling process
+must be linked with the
+.B libpthread
+library (either at compile time or dynamically at run time). Otherwise the
+function will print a warning and fall back to the single threaded mode.
.
.SH "RETURN VALUE"
On success, zero is returned. On error, \-1 is returned and
diff --git a/libselinux/man/man3/selinux_restorecon_parallel.3 b/libselinux/man/man3/selinux_restorecon_parallel.3
new file mode 100644
index 00000000..092d8412
--- /dev/null
+++ b/libselinux/man/man3/selinux_restorecon_parallel.3
@@ -0,0 +1 @@
+.so man3/selinux_restorecon.3
diff --git a/libselinux/src/libselinux.map b/libselinux/src/libselinux.map
index 2a368e93..d138e951 100644
--- a/libselinux/src/libselinux.map
+++ b/libselinux/src/libselinux.map
@@ -240,3 +240,8 @@ LIBSELINUX_1.0 {
local:
*;
};
+
+LIBSELINUX_3.3 {
+ global:
+ selinux_restorecon_parallel;
+} LIBSELINUX_1.0;
diff --git a/libselinux/src/selinux_internal.h b/libselinux/src/selinux_internal.h
index 27e9ac53..297dcf26 100644
--- a/libselinux/src/selinux_internal.h
+++ b/libselinux/src/selinux_internal.h
@@ -69,6 +69,22 @@ extern int selinux_page_size ;
pthread_mutex_unlock(LOCK); \
} while (0)
+#pragma weak pthread_create
+#pragma weak pthread_join
+#pragma weak pthread_cond_init
+#pragma weak pthread_cond_signal
+#pragma weak pthread_cond_destroy
+#pragma weak pthread_cond_wait
+
+/* check if all functions needed to do parallel operations are available */
+#define __pthread_supported ( \
+ pthread_create && \
+ pthread_join && \
+ pthread_cond_init && \
+ pthread_cond_destroy && \
+ pthread_cond_signal && \
+ pthread_cond_wait \
+)
#define SELINUXDIR "/etc/selinux/"
#define SELINUXCONFIG SELINUXDIR "config"
diff --git a/libselinux/src/selinux_restorecon.c b/libselinux/src/selinux_restorecon.c
index 252b775f..72f4fb46 100644
--- a/libselinux/src/selinux_restorecon.c
+++ b/libselinux/src/selinux_restorecon.c
@@ -610,7 +610,7 @@ out:
}
static int restorecon_sb(const char *pathname, const struct stat *sb,
- struct rest_flags *flags)
+ struct rest_flags *flags, bool first)
{
char *newcon = NULL;
char *curcon = NULL;
@@ -639,7 +639,7 @@ static int restorecon_sb(const char *pathname, const struct stat *sb,
sb->st_mode);
if (rc < 0) {
- if (errno == ENOENT && flags->warnonnomatch)
+ if (errno == ENOENT && flags->warnonnomatch && first)
selinux_log(SELINUX_INFO,
"Warning no default label for %s\n",
lookup_path);
@@ -814,66 +814,215 @@ oom:
goto free;
}
+struct rest_state {
+ struct rest_flags flags;
+ dev_t dev_num;
+ struct statfs sfsb;
+ bool ignore_digest;
+ bool setrestorecondigest;
+ bool parallel;
-/*
- * Public API
- */
+ FTS *fts;
+ FTSENT *ftsent_first;
+ struct dir_hash_node *head, *current;
+ bool abort;
+ int error;
+ int saved_errno;
+ pthread_mutex_t mutex;
+};
-/* selinux_restorecon(3) - Main function that is responsible for labeling */
-int selinux_restorecon(const char *pathname_orig,
- unsigned int restorecon_flags)
+static void *selinux_restorecon_thread(void *arg)
{
- struct rest_flags flags;
+ struct rest_state *state = arg;
+ FTS *fts = state->fts;
+ FTSENT *ftsent;
+ int error;
+ char ent_path[PATH_MAX];
+ struct stat ent_st;
+ bool first = false;
+
+ if (state->parallel)
+ pthread_mutex_lock(&state->mutex);
+
+ if (state->ftsent_first) {
+ ftsent = state->ftsent_first;
+ state->ftsent_first = NULL;
+ first = true;
+ goto loop_body;
+ }
+
+ while (((void)(errno = 0), ftsent = fts_read(fts)) != NULL) {
+loop_body:
+ /* If the FTS_XDEV flag is set and the device is different */
+ if (state->flags.set_xdev &&
+ ftsent->fts_statp->st_dev != state->dev_num)
+ continue;
+
+ switch (ftsent->fts_info) {
+ case FTS_DC:
+ selinux_log(SELINUX_ERROR,
+ "Directory cycle on %s.\n",
+ ftsent->fts_path);
+ errno = ELOOP;
+ state->error = -1;
+ state->abort = true;
+ goto finish;
+ case FTS_DP:
+ continue;
+ case FTS_DNR:
+ error = errno;
+ errno = ftsent->fts_errno;
+ selinux_log(SELINUX_ERROR,
+ "Could not read %s: %m.\n",
+ ftsent->fts_path);
+ errno = error;
+ fts_set(fts, ftsent, FTS_SKIP);
+ continue;
+ case FTS_NS:
+ error = errno;
+ errno = ftsent->fts_errno;
+ selinux_log(SELINUX_ERROR,
+ "Could not stat %s: %m.\n",
+ ftsent->fts_path);
+ errno = error;
+ fts_set(fts, ftsent, FTS_SKIP);
+ continue;
+ case FTS_ERR:
+ error = errno;
+ errno = ftsent->fts_errno;
+ selinux_log(SELINUX_ERROR,
+ "Error on %s: %m.\n",
+ ftsent->fts_path);
+ errno = error;
+ fts_set(fts, ftsent, FTS_SKIP);
+ continue;
+ case FTS_D:
+ if (state->sfsb.f_type == SYSFS_MAGIC &&
+ !selabel_partial_match(fc_sehandle,
+ ftsent->fts_path)) {
+ fts_set(fts, ftsent, FTS_SKIP);
+ continue;
+ }
+
+ if (check_excluded(ftsent->fts_path)) {
+ fts_set(fts, ftsent, FTS_SKIP);
+ continue;
+ }
- flags.nochange = (restorecon_flags &
+ if (state->setrestorecondigest) {
+ struct dir_hash_node *new_node = NULL;
+
+ if (check_context_match_for_dir(ftsent->fts_path,
+ &new_node,
+ state->error) &&
+ !state->ignore_digest) {
+ selinux_log(SELINUX_INFO,
+ "Skipping restorecon on directory(%s)\n",
+ ftsent->fts_path);
+ fts_set(fts, ftsent, FTS_SKIP);
+ continue;
+ }
+
+ if (new_node && !state->error) {
+ if (!state->current) {
+ state->current = new_node;
+ state->head = state->current;
+ } else {
+ state->current->next = new_node;
+ state->current = new_node;
+ }
+ }
+ }
+ /* fall through */
+ default:
+ strcpy(ent_path, ftsent->fts_path);
+ ent_st = *ftsent->fts_statp;
+ if (state->parallel)
+ pthread_mutex_unlock(&state->mutex);
+
+ error = restorecon_sb(ent_path, &ent_st, &state->flags,
+ first);
+
+ if (state->parallel) {
+ pthread_mutex_lock(&state->mutex);
+ if (state->abort)
+ goto unlock;
+ }
+
+ state->error |= error;
+ first = false;
+ if (error && state->flags.abort_on_error) {
+ state->abort = true;
+ goto finish;
+ }
+ break;
+ }
+ }
+
+finish:
+ if (!state->saved_errno)
+ state->saved_errno = errno;
+unlock:
+ if (state->parallel)
+ pthread_mutex_unlock(&state->mutex);
+ return NULL;
+}
+
+static int selinux_restorecon_common(const char *pathname_orig,
+ unsigned int restorecon_flags,
+ size_t nthreads)
+{
+ struct rest_state state;
+
+ state.flags.nochange = (restorecon_flags &
SELINUX_RESTORECON_NOCHANGE) ? true : false;
- flags.verbose = (restorecon_flags &
+ state.flags.verbose = (restorecon_flags &
SELINUX_RESTORECON_VERBOSE) ? true : false;
- flags.progress = (restorecon_flags &
+ state.flags.progress = (restorecon_flags &
SELINUX_RESTORECON_PROGRESS) ? true : false;
- flags.mass_relabel = (restorecon_flags &
+ state.flags.mass_relabel = (restorecon_flags &
SELINUX_RESTORECON_MASS_RELABEL) ? true : false;
- flags.recurse = (restorecon_flags &
+ state.flags.recurse = (restorecon_flags &
SELINUX_RESTORECON_RECURSE) ? true : false;
- flags.set_specctx = (restorecon_flags &
+ state.flags.set_specctx = (restorecon_flags &
SELINUX_RESTORECON_SET_SPECFILE_CTX) ? true : false;
- flags.userealpath = (restorecon_flags &
+ state.flags.userealpath = (restorecon_flags &
SELINUX_RESTORECON_REALPATH) ? true : false;
- flags.set_xdev = (restorecon_flags &
+ state.flags.set_xdev = (restorecon_flags &
SELINUX_RESTORECON_XDEV) ? true : false;
- flags.add_assoc = (restorecon_flags &
+ state.flags.add_assoc = (restorecon_flags &
SELINUX_RESTORECON_ADD_ASSOC) ? true : false;
- flags.abort_on_error = (restorecon_flags &
+ state.flags.abort_on_error = (restorecon_flags &
SELINUX_RESTORECON_ABORT_ON_ERROR) ? true : false;
- flags.syslog_changes = (restorecon_flags &
+ state.flags.syslog_changes = (restorecon_flags &
SELINUX_RESTORECON_SYSLOG_CHANGES) ? true : false;
- flags.log_matches = (restorecon_flags &
+ state.flags.log_matches = (restorecon_flags &
SELINUX_RESTORECON_LOG_MATCHES) ? true : false;
- flags.ignore_noent = (restorecon_flags &
+ state.flags.ignore_noent = (restorecon_flags &
SELINUX_RESTORECON_IGNORE_NOENTRY) ? true : false;
- flags.warnonnomatch = true;
- flags.conflicterror = (restorecon_flags &
+ state.flags.warnonnomatch = true;
+ state.flags.conflicterror = (restorecon_flags &
SELINUX_RESTORECON_CONFLICT_ERROR) ? true : false;
ignore_mounts = (restorecon_flags &
SELINUX_RESTORECON_IGNORE_MOUNTS) ? true : false;
- bool ignore_digest = (restorecon_flags &
+ state.ignore_digest = (restorecon_flags &
SELINUX_RESTORECON_IGNORE_DIGEST) ? true : false;
- bool setrestorecondigest = true;
+ state.setrestorecondigest = true;
+
+ state.head = NULL;
+ state.current = NULL;
+ state.abort = false;
+ state.error = 0;
+ state.saved_errno = 0;
struct stat sb;
- struct statfs sfsb;
- FTS *fts;
- FTSENT *ftsent;
char *pathname = NULL, *pathdnamer = NULL, *pathdname, *pathbname;
char *paths[2] = { NULL, NULL };
int fts_flags, error, sverrno;
- dev_t dev_num = 0;
struct dir_hash_node *current = NULL;
- struct dir_hash_node *head = NULL;
- int errno_tmp;
- if (flags.verbose && flags.progress)
- flags.verbose = false;
+ if (state.flags.verbose && state.flags.progress)
+ state.flags.verbose = false;
__selinux_once(fc_once, restorecon_init);
@@ -886,13 +1035,31 @@ int selinux_restorecon(const char *pathname_orig,
*/
if (selabel_no_digest ||
(restorecon_flags & SELINUX_RESTORECON_SKIP_DIGEST))
- setrestorecondigest = false;
+ state.setrestorecondigest = false;
+
+ if (!__pthread_supported) {
+ if (nthreads != 1) {
+ nthreads = 1;
+ selinux_log(SELINUX_WARNING,
+ "Threading functionality not available, falling back to 1 thread.");
+ }
+ } else if (nthreads == 0) {
+ long nproc = sysconf(_SC_NPROCESSORS_ONLN);
+
+ if (nproc > 0) {
+ nthreads = nproc;
+ } else {
+ nthreads = 1;
+ selinux_log(SELINUX_WARNING,
+ "Unable to detect CPU count, falling back to 1 thread.");
+ }
+ }
/*
* Convert passed-in pathname to canonical pathname by resolving
* realpath of containing dir, then appending last component name.
*/
- if (flags.userealpath) {
+ if (state.flags.userealpath) {
char *basename_cpy = strdup(pathname_orig);
if (!basename_cpy)
goto realpatherr;
@@ -937,7 +1104,7 @@ int selinux_restorecon(const char *pathname_orig,
paths[0] = pathname;
if (lstat(pathname, &sb) < 0) {
- if (flags.ignore_noent && errno == ENOENT) {
+ if (state.flags.ignore_noent && errno == ENOENT) {
free(pathdnamer);
free(pathname);
return 0;
@@ -952,21 +1119,21 @@ int selinux_restorecon(const char *pathname_orig,
/* Skip digest if not a directory */
if (!S_ISDIR(sb.st_mode))
- setrestorecondigest = false;
+ state.setrestorecondigest = false;
- if (!flags.recurse) {
+ if (!state.flags.recurse) {
if (check_excluded(pathname)) {
error = 0;
goto cleanup;
}
- error = restorecon_sb(pathname, &sb, &flags);
+ error = restorecon_sb(pathname, &sb, &state.flags, true);
goto cleanup;
}
/* Obtain fs type */
- memset(&sfsb, 0, sizeof sfsb);
- if (!S_ISLNK(sb.st_mode) && statfs(pathname, &sfsb) < 0) {
+ memset(&state.sfsb, 0, sizeof(state.sfsb));
+ if (!S_ISLNK(sb.st_mode) && statfs(pathname, &state.sfsb) < 0) {
selinux_log(SELINUX_ERROR,
"statfs(%s) failed: %m\n",
pathname);
@@ -975,21 +1142,21 @@ int selinux_restorecon(const char *pathname_orig,
}
/* Skip digest on in-memory filesystems and /sys */
- if (sfsb.f_type == RAMFS_MAGIC || sfsb.f_type == TMPFS_MAGIC ||
- sfsb.f_type == SYSFS_MAGIC)
- setrestorecondigest = false;
+ if (state.sfsb.f_type == RAMFS_MAGIC || state.sfsb.f_type == TMPFS_MAGIC ||
+ state.sfsb.f_type == SYSFS_MAGIC)
+ state.setrestorecondigest = false;
- if (flags.set_xdev)
+ if (state.flags.set_xdev)
fts_flags = FTS_PHYSICAL | FTS_NOCHDIR | FTS_XDEV;
else
fts_flags = FTS_PHYSICAL | FTS_NOCHDIR;
- fts = fts_open(paths, fts_flags, NULL);
- if (!fts)
+ state.fts = fts_open(paths, fts_flags, NULL);
+ if (!state.fts)
goto fts_err;
- ftsent = fts_read(fts);
- if (!ftsent)
+ state.ftsent_first = fts_read(state.fts);
+ if (!state.ftsent_first)
goto fts_err;
/*
@@ -1001,106 +1168,66 @@ int selinux_restorecon(const char *pathname_orig,
* directories with a different device number when the FTS_XDEV flag
* is set (from http://marc.info/?l=selinux&m=124688830500777&w=2).
*/
- dev_num = ftsent->fts_statp->st_dev;
+ state.dev_num = state.ftsent_first->fts_statp->st_dev;
- error = 0;
- do {
- /* If the FTS_XDEV flag is set and the device is different */
- if (flags.set_xdev && ftsent->fts_statp->st_dev != dev_num)
- continue;
+ if (nthreads == 1) {
+ state.parallel = false;
+ selinux_restorecon_thread(&state);
+ } else {
+ size_t i;
+ pthread_t self = pthread_self();
+ pthread_t *threads = NULL;
- switch (ftsent->fts_info) {
- case FTS_DC:
- selinux_log(SELINUX_ERROR,
- "Directory cycle on %s.\n",
- ftsent->fts_path);
- errno = ELOOP;
- error = -1;
- goto out;
- case FTS_DP:
- continue;
- case FTS_DNR:
- errno_tmp = errno;
- errno = ftsent->fts_errno;
- selinux_log(SELINUX_ERROR,
- "Could not read %s: %m.\n",
- ftsent->fts_path);
- errno = errno_tmp;
- fts_set(fts, ftsent, FTS_SKIP);
- continue;
- case FTS_NS:
- errno_tmp = errno;
- errno = ftsent->fts_errno;
- selinux_log(SELINUX_ERROR,
- "Could not stat %s: %m.\n",
- ftsent->fts_path);
- errno = errno_tmp;
- fts_set(fts, ftsent, FTS_SKIP);
- continue;
- case FTS_ERR:
- errno_tmp = errno;
- errno = ftsent->fts_errno;
- selinux_log(SELINUX_ERROR,
- "Error on %s: %m.\n",
- ftsent->fts_path);
- errno = errno_tmp;
- fts_set(fts, ftsent, FTS_SKIP);
- continue;
- case FTS_D:
- if (sfsb.f_type == SYSFS_MAGIC &&
- !selabel_partial_match(fc_sehandle,
- ftsent->fts_path)) {
- fts_set(fts, ftsent, FTS_SKIP);
- continue;
- }
+ pthread_mutex_init(&state.mutex, NULL);
- if (check_excluded(ftsent->fts_path)) {
- fts_set(fts, ftsent, FTS_SKIP);
- continue;
+ threads = calloc(nthreads - 1, sizeof(*threads));
+ if (!threads)
+ goto oom;
+
+ state.parallel = true;
+ /*
+ * Start (nthreads - 1) threads - the main thread is going to
+ * take part, too.
+ */
+ for (i = 0; i < nthreads - 1; i++) {
+ if (pthread_create(&threads[i], NULL,
+ selinux_restorecon_thread, &state)) {
+ /*
+ * If any thread fails to be created, just mark
+ * it as such and let the successfully created
+ * threads do the job. In the worst case the
+ * main thread will do everything, but that's
+ * still better than to give up.
+ */
+ threads[i] = self;
}
+ }
- if (setrestorecondigest) {
- struct dir_hash_node *new_node = NULL;
+ /* Let's join in on the fun! */
+ selinux_restorecon_thread(&state);
- if (check_context_match_for_dir(ftsent->fts_path,
- &new_node,
- error) &&
- !ignore_digest) {
- selinux_log(SELINUX_INFO,
- "Skipping restorecon on directory(%s)\n",
- ftsent->fts_path);
- fts_set(fts, ftsent, FTS_SKIP);
- continue;
- }
-
- if (new_node && !error) {
- if (!current) {
- current = new_node;
- head = current;
- } else {
- current->next = new_node;
- current = current->next;
- }
- }
- }
- /* fall through */
- default:
- error |= restorecon_sb(ftsent->fts_path,
- ftsent->fts_statp, &flags);
- if (flags.warnonnomatch)
- flags.warnonnomatch = false;
- if (error && flags.abort_on_error)
- goto out;
- break;
+ /* Now wait for all threads to finish. */
+ for (i = 0; i < nthreads - 1; i++) {
+ /* Skip threads that failed to be created. */
+ if (pthread_equal(threads[i], self))
+ continue;
+ pthread_join(threads[i], NULL);
}
- } while ((ftsent = fts_read(fts)) != NULL);
+ free(threads);
+
+ pthread_mutex_destroy(&state.mutex);
+ }
+
+ error = state.error;
+ if (state.saved_errno)
+ goto out;
/*
* Labeling successful. Write partial match digests for subdirectories.
* TODO: Write digest upon FTS_DP if no error occurs in its descents.
*/
- if (setrestorecondigest && !flags.nochange && !error) {
- current = head;
+ if (state.setrestorecondigest && !state.flags.nochange && !error) {
+ current = state.head;
while (current != NULL) {
if (setxattr(current->path,
RESTORECON_PARTIAL_MATCH_DIGEST,
@@ -1115,22 +1242,21 @@ int selinux_restorecon(const char *pathname_orig,
}
out:
- if (flags.progress && flags.mass_relabel)
+ if (state.flags.progress && state.flags.mass_relabel)
fprintf(stdout, "\r%s 100.0%%\n", pathname);
- sverrno = errno;
- (void) fts_close(fts);
- errno = sverrno;
+ (void) fts_close(state.fts);
+ errno = state.saved_errno;
cleanup:
- if (flags.add_assoc) {
- if (flags.verbose)
+ if (state.flags.add_assoc) {
+ if (state.flags.verbose)
filespec_eval();
filespec_destroy();
}
free(pathdnamer);
free(pathname);
- current = head;
+ current = state.head;
while (current != NULL) {
struct dir_hash_node *next = current->next;
@@ -1164,6 +1290,26 @@ fts_err:
goto cleanup;
}
+
+/*
+ * Public API
+ */
+
+/* selinux_restorecon(3) - Main function that is responsible for labeling */
+int selinux_restorecon(const char *pathname_orig,
+ unsigned int restorecon_flags)
+{
+ return selinux_restorecon_common(pathname_orig, restorecon_flags, 1);
+}
+
+/* selinux_restorecon_parallel(3) - Parallel version of selinux_restorecon(3) */
+int selinux_restorecon_parallel(const char *pathname_orig,
+ unsigned int restorecon_flags,
+ size_t nthreads)
+{
+ return selinux_restorecon_common(pathname_orig, restorecon_flags, nthreads);
+}
+
/* selinux_restorecon_set_sehandle(3) is called to set the global fc handle */
void selinux_restorecon_set_sehandle(struct selabel_handle *hndl)
{
diff --git a/libselinux/src/selinuxswig_python.i b/libselinux/src/selinuxswig_python.i
index 4c73bf92..17e03b9e 100644
--- a/libselinux/src/selinuxswig_python.i
+++ b/libselinux/src/selinuxswig_python.i
@@ -20,7 +20,7 @@ DISABLED = -1
PERMISSIVE = 0
ENFORCING = 1
-def restorecon(path, recursive=False, verbose=False, force=False):
+def restorecon(path, recursive=False, verbose=False, force=False, nthreads=1):
""" Restore SELinux context on a given path
Arguments:
@@ -32,6 +32,8 @@ def restorecon(path, recursive=False, verbose=False, force=False):
force -- Force reset of context to match file_context for customizable files,
and the default file context, changing the user, role, range portion as well
as the type (default False)
+ nthreads -- The number of threads to use during relabeling, or 0 to use as many
+ threads as there are online CPU cores (default 1)
"""
restorecon_flags = SELINUX_RESTORECON_IGNORE_DIGEST | SELINUX_RESTORECON_REALPATH
@@ -41,7 +43,7 @@ def restorecon(path, recursive=False, verbose=False, force=False):
restorecon_flags |= SELINUX_RESTORECON_VERBOSE
if force:
restorecon_flags |= SELINUX_RESTORECON_SET_SPECFILE_CTX
- selinux_restorecon(os.path.expanduser(path), restorecon_flags)
+ selinux_restorecon_parallel(os.path.expanduser(path), restorecon_flags, nthreads)
def chcon(path, context, recursive=False):
""" Set the SELinux context on a given path """
diff --git a/libselinux/src/selinuxswig_python_exception.i b/libselinux/src/selinuxswig_python_exception.i
index 237ea69a..a02f4923 100644
--- a/libselinux/src/selinuxswig_python_exception.i
+++ b/libselinux/src/selinuxswig_python_exception.i
@@ -1183,6 +1183,14 @@
}
}
+%exception selinux_restorecon_parallel {
+ $action
+ if (result < 0) {
+ PyErr_SetFromErrno(PyExc_OSError);
+ SWIG_fail;
+ }
+}
+
%exception selinux_restorecon_set_alt_rootpath {
$action
if (result < 0) {
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH userspace v4 8/8] setfiles/restorecon: support parallel relabeling
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
` (6 preceding siblings ...)
2021-10-26 11:52 ` [PATCH userspace v4 7/8] selinux_restorecon: introduce selinux_restorecon_parallel(3) Ondrej Mosnacek
@ 2021-10-26 11:52 ` Ondrej Mosnacek
2021-11-22 11:56 ` [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
8 siblings, 0 replies; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-10-26 11:52 UTC (permalink / raw)
To: selinux
Use the newly introduced selinux_restorecon_parallel(3) in
setfiles/restorecon and a -T option to both to allow enabling parallel
relabeling. The default behavior without specifying the -T option is to
use 1 thread; parallel relabeling must be requested explicitly by
passing -T 0 (which will use as many threads as there are available CPU
cores) or -T <N>, which will use <N> threads.
=== Benchmarks ===
As measured on a 32-core cloud VM with Fedora 34. Not a fully
representative environment, but still the scaling is quite good.
WITHOUT PATCHES:
$ time restorecon -rn /usr
real 0m21.689s
user 0m21.070s
sys 0m0.494s
WITH PATCHES:
$ time restorecon -rn /usr
real 0m23.940s
user 0m23.127s
sys 0m0.653s
$ time restorecon -rn -T 2 /usr
real 0m13.145s
user 0m25.306s
sys 0m0.695s
$ time restorecon -rn -T 4 /usr
real 0m7.559s
user 0m28.470s
sys 0m1.099s
$ time restorecon -rn -T 8 /usr
real 0m5.186s
user 0m37.450s
sys 0m2.094s
$ time restorecon -rn -T 16 /usr
real 0m3.831s
user 0m51.220s
sys 0m4.895s
$ time restorecon -rn -T 32 /usr
real 0m2.650s
user 1m5.136s
sys 0m6.614s
Note that the benchmarks were performed in read-only mode (-n), so the
labels were only read and looked up in the database, not written. When
fixing labels on a heavily mislabeled system, the scaling would likely
be event better, since a larger % of work could be done in parallel.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
policycoreutils/setfiles/Makefile | 2 +-
policycoreutils/setfiles/restore.c | 7 ++++---
policycoreutils/setfiles/restore.h | 2 +-
policycoreutils/setfiles/restorecon.8 | 9 +++++++++
policycoreutils/setfiles/setfiles.8 | 9 +++++++++
policycoreutils/setfiles/setfiles.c | 28 ++++++++++++++++-----------
6 files changed, 41 insertions(+), 16 deletions(-)
diff --git a/policycoreutils/setfiles/Makefile b/policycoreutils/setfiles/Makefile
index 63d81850..d7670a8f 100644
--- a/policycoreutils/setfiles/Makefile
+++ b/policycoreutils/setfiles/Makefile
@@ -6,7 +6,7 @@ MANDIR = $(PREFIX)/share/man
AUDITH ?= $(shell test -f /usr/include/libaudit.h && echo y)
CFLAGS ?= -g -Werror -Wall -W
-override LDLIBS += -lselinux -lsepol
+override LDLIBS += -lselinux -lsepol -lpthread
ifeq ($(AUDITH), y)
override CFLAGS += -DUSE_AUDIT
diff --git a/policycoreutils/setfiles/restore.c b/policycoreutils/setfiles/restore.c
index 9d688c60..74d48bb3 100644
--- a/policycoreutils/setfiles/restore.c
+++ b/policycoreutils/setfiles/restore.c
@@ -72,7 +72,7 @@ void restore_finish(void)
}
}
-int process_glob(char *name, struct restore_opts *opts)
+int process_glob(char *name, struct restore_opts *opts, size_t nthreads)
{
glob_t globbuf;
size_t i = 0;
@@ -91,8 +91,9 @@ int process_glob(char *name, struct restore_opts *opts)
continue;
if (len > 0 && strcmp(&globbuf.gl_pathv[i][len], "/..") == 0)
continue;
- rc = selinux_restorecon(globbuf.gl_pathv[i],
- opts->restorecon_flags);
+ rc = selinux_restorecon_parallel(globbuf.gl_pathv[i],
+ opts->restorecon_flags,
+ nthreads);
if (rc < 0)
errors = rc;
}
diff --git a/policycoreutils/setfiles/restore.h b/policycoreutils/setfiles/restore.h
index ac6ad680..bb35a1db 100644
--- a/policycoreutils/setfiles/restore.h
+++ b/policycoreutils/setfiles/restore.h
@@ -49,7 +49,7 @@ struct restore_opts {
void restore_init(struct restore_opts *opts);
void restore_finish(void);
void add_exclude(const char *directory);
-int process_glob(char *name, struct restore_opts *opts);
+int process_glob(char *name, struct restore_opts *opts, size_t nthreads);
extern char **exclude_list;
#endif
diff --git a/policycoreutils/setfiles/restorecon.8 b/policycoreutils/setfiles/restorecon.8
index 668486f6..e07db2c8 100644
--- a/policycoreutils/setfiles/restorecon.8
+++ b/policycoreutils/setfiles/restorecon.8
@@ -33,6 +33,8 @@ restorecon \- restore file(s) default SELinux security contexts.
.RB [ \-W ]
.RB [ \-I | \-D ]
.RB [ \-x ]
+.RB [ \-T
+.IR nthreads ]
.SH "DESCRIPTION"
This manual page describes the
@@ -160,6 +162,13 @@ prevent
.B restorecon
from crossing file system boundaries.
.TP
+.BI \-T \ nthreads
+use up to
+.I nthreads
+threads. Specify 0 to create as many threads as there are available
+CPU cores; 1 to use only a single thread (default); or any positive
+number to use the given number of threads (if possible).
+.TP
.SH "ARGUMENTS"
.IR pathname \ ...
The pathname for the file(s) to be relabeled.
diff --git a/policycoreutils/setfiles/setfiles.8 b/policycoreutils/setfiles/setfiles.8
index 4d28bc9a..15f939d1 100644
--- a/policycoreutils/setfiles/setfiles.8
+++ b/policycoreutils/setfiles/setfiles.8
@@ -19,6 +19,8 @@ setfiles \- set SELinux file security contexts.
.RB [ \-W ]
.RB [ \-F ]
.RB [ \-I | \-D ]
+.RB [ \-T
+.IR nthreads ]
.I spec_file
.IR pathname \ ...
@@ -161,6 +163,13 @@ quote marks or backslashes. The
option of GNU
.B find
produces input suitable for this mode.
+.TP
+.BI \-T \ nthreads
+use up to
+.I nthreads
+threads. Specify 0 to create as many threads as there are available
+CPU cores; 1 to use only a single thread (default); or any positive
+number to use the given number of threads (if possible).
.SH "ARGUMENTS"
.TP
diff --git a/policycoreutils/setfiles/setfiles.c b/policycoreutils/setfiles/setfiles.c
index f018d161..2313a21f 100644
--- a/policycoreutils/setfiles/setfiles.c
+++ b/policycoreutils/setfiles/setfiles.c
@@ -1,4 +1,5 @@
#include "restore.h"
+#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <stdio_ext.h>
@@ -34,14 +35,14 @@ static __attribute__((__noreturn__)) void usage(const char *const name)
{
if (iamrestorecon) {
fprintf(stderr,
- "usage: %s [-iIDFmnprRv0x] [-e excludedir] pathname...\n"
- "usage: %s [-iIDFmnprRv0x] [-e excludedir] -f filename\n",
+ "usage: %s [-iIDFmnprRv0xT] [-e excludedir] pathname...\n"
+ "usage: %s [-iIDFmnprRv0xT] [-e excludedir] -f filename\n",
name, name);
} else {
fprintf(stderr,
- "usage: %s [-diIDlmnpqvEFW] [-e excludedir] [-r alt_root_path] [-c policyfile] spec_file pathname...\n"
- "usage: %s [-diIDlmnpqvEFW] [-e excludedir] [-r alt_root_path] [-c policyfile] spec_file -f filename\n"
- "usage: %s -s [-diIDlmnpqvFW] spec_file\n",
+ "usage: %s [-diIDlmnpqvEFWT] [-e excludedir] [-r alt_root_path] [-c policyfile] spec_file pathname...\n"
+ "usage: %s [-diIDlmnpqvEFWT] [-e excludedir] [-r alt_root_path] [-c policyfile] spec_file -f filename\n"
+ "usage: %s -s [-diIDlmnpqvFWT] spec_file\n",
name, name, name);
}
exit(-1);
@@ -144,12 +145,12 @@ int main(int argc, char **argv)
int opt, i = 0;
const char *input_filename = NULL;
int use_input_file = 0;
- char *buf = NULL;
- size_t buf_len;
+ char *buf = NULL, *endptr;
+ size_t buf_len, nthreads = 1;
const char *base;
int errors = 0;
- const char *ropts = "e:f:hiIDlmno:pqrsvFRW0x";
- const char *sopts = "c:de:f:hiIDlmno:pqr:svEFR:W0";
+ const char *ropts = "e:f:hiIDlmno:pqrsvFRW0xT:";
+ const char *sopts = "c:de:f:hiIDlmno:pqr:svEFR:W0T:";
const char *opts;
union selinux_callback cb;
@@ -370,6 +371,11 @@ int main(int argc, char **argv)
usage(argv[0]);
}
break;
+ case 'T':
+ nthreads = strtoull(optarg, &endptr, 10);
+ if (*optarg == '\0' || *endptr != '\0')
+ usage(argv[0]);
+ break;
case 'h':
case '?':
usage(argv[0]);
@@ -448,13 +454,13 @@ int main(int argc, char **argv)
buf[len - 1] = 0;
if (!strcmp(buf, "/"))
r_opts.mass_relabel = SELINUX_RESTORECON_MASS_RELABEL;
- errors |= process_glob(buf, &r_opts) < 0;
+ errors |= process_glob(buf, &r_opts, nthreads) < 0;
}
if (strcmp(input_filename, "-") != 0)
fclose(f);
} else {
for (i = optind; i < argc; i++)
- errors |= process_glob(argv[i], &r_opts) < 0;
+ errors |= process_glob(argv[i], &r_opts, nthreads) < 0;
}
maybe_audit_mass_relabel(r_opts.mass_relabel, errors);
--
2.31.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH userspace v4 0/8] Parallel setfiles/restorecon
2021-10-26 11:52 [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
` (7 preceding siblings ...)
2021-10-26 11:52 ` [PATCH userspace v4 8/8] setfiles/restorecon: support parallel relabeling Ondrej Mosnacek
@ 2021-11-22 11:56 ` Ondrej Mosnacek
2021-11-23 9:26 ` Petr Lautrbach
8 siblings, 1 reply; 13+ messages in thread
From: Ondrej Mosnacek @ 2021-11-22 11:56 UTC (permalink / raw)
To: SElinux list
On Tue, Oct 26, 2021 at 1:52 PM Ondrej Mosnacek <omosnace@redhat.com> wrote:
> This series adds basic support for parallel relabeling to the libselinux
> API and the setfiles/restorecon CLI tools. It turns out that doing the
> relabeling in parallel can significantly reduce the time even with a
> relatively simple approach.
>
> The first patch fixes a data race around match tracking in label_file.
> Second patch is a small cleanup found along the way. Patches 3-6 are
> small incremental changes that various functions more thread-safe.
> Patch 7 then completes the parallel relabeling implementation at
> libselinux level and adds a new function to the API that allows to make
> use of it. Finally, patch 8 adds parallel relabeling support to the
> setfiles/restorecon tools.
>
> The relevant man pages are also updated to reflect the new
> functionality.
>
> The patch descriptions contain more details, namely the last patch has
> also some benchmark numbers.
>
> Changes v3->v4:
> - add a patch to fix a pre-existing data race in is_context_customizable()
>
> Changes v2->v3:
> - add a patch to fix a pre-existing data race in label_file
> - wait for threads to complete using pthread_join(3) to prevent thread leaks
>
> Changes v1->v2:
> - make selinux_log() synchronized instead of introducing selinux_log_sync()
> - fix -Wcomma warning
> - update the swig files as well
> - bump new symbol version to LIBSELINUX_3.3 (this may need further update
> depending on when this gets merged)
>
> Ondrej Mosnacek (8):
> label_file: fix a data race
> selinux_restorecon: simplify fl_head allocation by using calloc()
> selinux_restorecon: protect file_spec list with a mutex
> libselinux: make selinux_log() thread-safe
> libselinux: make is_context_customizable() thread-safe
> selinux_restorecon: add a global mutex to synchronize progress output
> selinux_restorecon: introduce selinux_restorecon_parallel(3)
> setfiles/restorecon: support parallel relabeling
A friendly reminder that these patches could use a review/ack :)
--
Ondrej Mosnacek
Software Engineer, Linux Security - SELinux kernel
Red Hat, Inc.
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH userspace v4 0/8] Parallel setfiles/restorecon
2021-11-22 11:56 ` [PATCH userspace v4 0/8] Parallel setfiles/restorecon Ondrej Mosnacek
@ 2021-11-23 9:26 ` Petr Lautrbach
2021-11-23 9:40 ` Petr Lautrbach
0 siblings, 1 reply; 13+ messages in thread
From: Petr Lautrbach @ 2021-11-23 9:26 UTC (permalink / raw)
To: Ondrej Mosnacek, SElinux list
Ondrej Mosnacek <omosnace@redhat.com> writes:
> On Tue, Oct 26, 2021 at 1:52 PM Ondrej Mosnacek <omosnace@redhat.com> wrote:
>> This series adds basic support for parallel relabeling to the libselinux
>> API and the setfiles/restorecon CLI tools. It turns out that doing the
>> relabeling in parallel can significantly reduce the time even with a
>> relatively simple approach.
>>
>> The first patch fixes a data race around match tracking in label_file.
>> Second patch is a small cleanup found along the way. Patches 3-6 are
>> small incremental changes that various functions more thread-safe.
>> Patch 7 then completes the parallel relabeling implementation at
>> libselinux level and adds a new function to the API that allows to make
>> use of it. Finally, patch 8 adds parallel relabeling support to the
>> setfiles/restorecon tools.
>>
>> The relevant man pages are also updated to reflect the new
>> functionality.
>>
>> The patch descriptions contain more details, namely the last patch has
>> also some benchmark numbers.
>>
>> Changes v3->v4:
>> - add a patch to fix a pre-existing data race in is_context_customizable()
>>
>> Changes v2->v3:
>> - add a patch to fix a pre-existing data race in label_file
>> - wait for threads to complete using pthread_join(3) to prevent thread leaks
>>
>> Changes v1->v2:
>> - make selinux_log() synchronized instead of introducing selinux_log_sync()
>> - fix -Wcomma warning
>> - update the swig files as well
>> - bump new symbol version to LIBSELINUX_3.3 (this may need further update
>> depending on when this gets merged)
>>
>> Ondrej Mosnacek (8):
>> label_file: fix a data race
>> selinux_restorecon: simplify fl_head allocation by using calloc()
>> selinux_restorecon: protect file_spec list with a mutex
>> libselinux: make selinux_log() thread-safe
>> libselinux: make is_context_customizable() thread-safe
>> selinux_restorecon: add a global mutex to synchronize progress output
>> selinux_restorecon: introduce selinux_restorecon_parallel(3)
>> setfiles/restorecon: support parallel relabeling
>
> A friendly reminder that these patches could use a review/ack :)
Acked-by: Petr Lautrbach <plautrba@redhat.com>
# chcon -R -t admin_home_t /usr
# time restorecon -r -F /usr
real 1m13.629s
user 1m11.581s
sys 0m1.885s
# chcon -R -t admin_home_t /usr
# time restorecon -r -F -T 0 /usr
real 0m7.425s
user 1m18.712s
sys 0m3.692s
> --
> Ondrej Mosnacek
> Software Engineer, Linux Security - SELinux kernel
> Red Hat, Inc.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH userspace v4 0/8] Parallel setfiles/restorecon
2021-11-23 9:26 ` Petr Lautrbach
@ 2021-11-23 9:40 ` Petr Lautrbach
0 siblings, 0 replies; 13+ messages in thread
From: Petr Lautrbach @ 2021-11-23 9:40 UTC (permalink / raw)
To: Ondrej Mosnacek, SElinux list
Petr Lautrbach <plautrba@redhat.com> writes:
> Ondrej Mosnacek <omosnace@redhat.com> writes:
>
>> On Tue, Oct 26, 2021 at 1:52 PM Ondrej Mosnacek <omosnace@redhat.com> wrote:
>>> This series adds basic support for parallel relabeling to the libselinux
>>> API and the setfiles/restorecon CLI tools. It turns out that doing the
>>> relabeling in parallel can significantly reduce the time even with a
>>> relatively simple approach.
>>>
>>> The first patch fixes a data race around match tracking in label_file.
>>> Second patch is a small cleanup found along the way. Patches 3-6 are
>>> small incremental changes that various functions more thread-safe.
>>> Patch 7 then completes the parallel relabeling implementation at
>>> libselinux level and adds a new function to the API that allows to make
>>> use of it. Finally, patch 8 adds parallel relabeling support to the
>>> setfiles/restorecon tools.
>>>
>>> The relevant man pages are also updated to reflect the new
>>> functionality.
>>>
>>> The patch descriptions contain more details, namely the last patch has
>>> also some benchmark numbers.
>>>
>>> Changes v3->v4:
>>> - add a patch to fix a pre-existing data race in is_context_customizable()
>>>
>>> Changes v2->v3:
>>> - add a patch to fix a pre-existing data race in label_file
>>> - wait for threads to complete using pthread_join(3) to prevent thread leaks
>>>
>>> Changes v1->v2:
>>> - make selinux_log() synchronized instead of introducing selinux_log_sync()
>>> - fix -Wcomma warning
>>> - update the swig files as well
>>> - bump new symbol version to LIBSELINUX_3.3 (this may need further update
>>> depending on when this gets merged)
>>>
>>> Ondrej Mosnacek (8):
>>> label_file: fix a data race
>>> selinux_restorecon: simplify fl_head allocation by using calloc()
>>> selinux_restorecon: protect file_spec list with a mutex
>>> libselinux: make selinux_log() thread-safe
>>> libselinux: make is_context_customizable() thread-safe
>>> selinux_restorecon: add a global mutex to synchronize progress output
>>> selinux_restorecon: introduce selinux_restorecon_parallel(3)
>>> setfiles/restorecon: support parallel relabeling
>>
>> A friendly reminder that these patches could use a review/ack :)
>
>
> Acked-by: Petr Lautrbach <plautrba@redhat.com>
It's merged now. Thanks!
> # chcon -R -t admin_home_t /usr
> # time restorecon -r -F /usr
>
> real 1m13.629s
> user 1m11.581s
> sys 0m1.885s
>
> # chcon -R -t admin_home_t /usr
> # time restorecon -r -F -T 0 /usr
>
> real 0m7.425s
> user 1m18.712s
> sys 0m3.692s
>
>
>> --
>> Ondrej Mosnacek
>> Software Engineer, Linux Security - SELinux kernel
>> Red Hat, Inc.
^ permalink raw reply [flat|nested] 13+ messages in thread