* [PATCH net-next V2 1/6] net/mlx5e: Add qos capability check
2016-09-06 16:04 [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
@ 2016-09-06 16:04 ` Saeed Mahameed
2016-09-06 16:04 ` [PATCH net-next V2 2/6] net/mlx5e: Support DCBX CEE API Saeed Mahameed
` (5 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-06 16:04 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Huy Nguyen, Or Gerlitz, Saeed Mahameed
From: Huy Nguyen <huyn@mellanox.com>
Make sure firmware supports qos before exposing the dcb api.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 03586ee..3b05810 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3111,7 +3111,8 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
if (MLX5_CAP_GEN(mdev, vport_group_manager)) {
netdev->netdev_ops = &mlx5e_netdev_ops_sriov;
#ifdef CONFIG_MLX5_CORE_EN_DCB
- netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
+ if (MLX5_CAP_GEN(mdev, qos))
+ netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
#endif
} else {
netdev->netdev_ops = &mlx5e_netdev_ops_basic;
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH net-next V2 2/6] net/mlx5e: Support DCBX CEE API
2016-09-06 16:04 [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
2016-09-06 16:04 ` [PATCH net-next V2 1/6] net/mlx5e: Add qos capability check Saeed Mahameed
@ 2016-09-06 16:04 ` Saeed Mahameed
2016-09-06 16:04 ` [PATCH net-next V2 3/6] net/mlx5e: Read ETS settings directly from firmware Saeed Mahameed
` (4 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-06 16:04 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Huy Nguyen, Or Gerlitz, Saeed Mahameed
From: Huy Nguyen <huyn@mellanox.com>
Add DCBX CEE API interface for ConnectX-4. Configurations are stored in
a temporary structure and are applied to the card's firmware when
the CEE's setall callback function is called.
Note:
priority group in CEE is equivalent to traffic class in ConnectX-4
hardware spec.
bw allocation per priority in CEE is not supported because ConnectX-4
only supports bw allocation per traffic class.
user priority in CEE does not have an equivalent term in ConnectX-4.
Therefore, user priority to priority mapping in CEE is not supported.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 24 ++
drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 301 ++++++++++++++++++++-
drivers/net/ethernet/mellanox/mlx5/core/port.c | 43 +++
include/linux/mlx5/port.h | 4 +
4 files changed, 370 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 9699560..6919e3c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -209,6 +209,26 @@ struct mlx5e_params {
bool rx_am_enabled;
};
+#ifdef CONFIG_MLX5_CORE_EN_DCB
+struct mlx5e_cee_config {
+ /* bw pct for priority group */
+ u8 pg_bw_pct[CEE_DCBX_MAX_PGS];
+ u8 prio_to_pg_map[CEE_DCBX_MAX_PRIO];
+ bool pfc_setting[CEE_DCBX_MAX_PRIO];
+ bool pfc_enable;
+};
+
+enum {
+ MLX5_DCB_CHG_RESET,
+ MLX5_DCB_NO_CHG,
+ MLX5_DCB_CHG_NO_RESET,
+};
+
+struct mlx5e_dcbx {
+ struct mlx5e_cee_config cee_cfg; /* pending configuration */
+};
+#endif
+
struct mlx5e_tstamp {
rwlock_t lock;
struct cyclecounter cycles;
@@ -650,6 +670,10 @@ struct mlx5e_priv {
struct mlx5e_stats stats;
struct mlx5e_tstamp tstamp;
u16 q_counter;
+#ifdef CONFIG_MLX5_CORE_EN_DCB
+ struct mlx5e_dcbx dcbx;
+#endif
+
const struct mlx5e_profile *profile;
void *ppriv;
};
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 762af16..0595243 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -38,6 +38,9 @@
#define MLX5E_100MB (100000)
#define MLX5E_1GB (1000000)
+#define MLX5E_CEE_STATE_UP 1
+#define MLX5E_CEE_STATE_DOWN 0
+
static int mlx5e_dcbnl_ieee_getets(struct net_device *netdev,
struct ieee_ets *ets)
{
@@ -222,13 +225,15 @@ static int mlx5e_dcbnl_ieee_setpfc(struct net_device *dev,
static u8 mlx5e_dcbnl_getdcbx(struct net_device *dev)
{
- return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE;
+ return DCB_CAP_DCBX_HOST |
+ DCB_CAP_DCBX_VER_IEEE |
+ DCB_CAP_DCBX_VER_CEE;
}
static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode)
{
if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
- (mode & DCB_CAP_DCBX_VER_CEE) ||
+ !(mode & DCB_CAP_DCBX_VER_CEE) ||
!(mode & DCB_CAP_DCBX_VER_IEEE) ||
!(mode & DCB_CAP_DCBX_HOST))
return 1;
@@ -304,6 +309,281 @@ static int mlx5e_dcbnl_ieee_setmaxrate(struct net_device *netdev,
return mlx5_modify_port_ets_rate_limit(mdev, max_bw_value, max_bw_unit);
}
+static u8 mlx5e_dcbnl_setall(struct net_device *netdev)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+ struct mlx5_core_dev *mdev = priv->mdev;
+ struct ieee_ets ets;
+ struct ieee_pfc pfc;
+ int err;
+ int i;
+
+ memset(&ets, 0, sizeof(ets));
+ memset(&pfc, 0, sizeof(pfc));
+
+ ets.ets_cap = IEEE_8021QAZ_MAX_TCS;
+ for (i = 0; i < CEE_DCBX_MAX_PGS; i++) {
+ ets.tc_tx_bw[i] = cee_cfg->pg_bw_pct[i];
+ ets.tc_rx_bw[i] = cee_cfg->pg_bw_pct[i];
+ ets.tc_tsa[i] = IEEE_8021QAZ_TSA_ETS;
+ ets.prio_tc[i] = cee_cfg->prio_to_pg_map[i];
+ }
+
+ err = mlx5e_dbcnl_validate_ets(netdev, &ets);
+ if (err) {
+ netdev_err(netdev,
+ "%s, Failed to validate ETS: %d\n", __func__, err);
+ goto out;
+ }
+
+ err = mlx5e_dcbnl_ieee_setets_core(priv, &ets);
+ if (err) {
+ netdev_err(netdev,
+ "%s, Failed to set ETS: %d\n", __func__, err);
+ goto out;
+ }
+
+ /* Set PFC */
+ pfc.pfc_cap = mlx5_max_tc(mdev) + 1;
+ if (!cee_cfg->pfc_enable)
+ pfc.pfc_en = 0;
+ else
+ for (i = 0; i < CEE_DCBX_MAX_PRIO; i++)
+ pfc.pfc_en |= cee_cfg->pfc_setting[i] << i;
+
+ err = mlx5e_dcbnl_ieee_setpfc(netdev, &pfc);
+ if (err) {
+ netdev_err(netdev,
+ "%s, Failed to set PFC: %d\n", __func__, err);
+ goto out;
+ }
+out:
+ return err ? MLX5_DCB_NO_CHG : MLX5_DCB_CHG_RESET;
+}
+
+static u8 mlx5e_dcbnl_getstate(struct net_device *netdev)
+{
+ return MLX5E_CEE_STATE_UP;
+}
+
+static void mlx5e_dcbnl_getpermhwaddr(struct net_device *netdev,
+ u8 *perm_addr)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+
+ if (!perm_addr)
+ return;
+
+ mlx5_query_nic_vport_mac_address(priv->mdev, 0, perm_addr);
+}
+
+static void mlx5e_dcbnl_setpgtccfgtx(struct net_device *netdev,
+ int priority, u8 prio_type,
+ u8 pgid, u8 bw_pct, u8 up_map)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+
+ if (priority >= CEE_DCBX_MAX_PRIO) {
+ netdev_err(netdev,
+ "%s, priority is out of range\n", __func__);
+ return;
+ }
+
+ if (pgid >= CEE_DCBX_MAX_PGS) {
+ netdev_err(netdev,
+ "%s, priority group is out of range\n", __func__);
+ return;
+ }
+
+ cee_cfg->prio_to_pg_map[priority] = pgid;
+}
+
+static void mlx5e_dcbnl_setpgbwgcfgtx(struct net_device *netdev,
+ int pgid, u8 bw_pct)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+
+ if (pgid >= CEE_DCBX_MAX_PGS) {
+ netdev_err(netdev,
+ "%s, priority group is out of range\n", __func__);
+ return;
+ }
+
+ cee_cfg->pg_bw_pct[pgid] = bw_pct;
+}
+
+static void mlx5e_dcbnl_getpgtccfgtx(struct net_device *netdev,
+ int priority, u8 *prio_type,
+ u8 *pgid, u8 *bw_pct, u8 *up_map)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5_core_dev *mdev = priv->mdev;
+
+ if (priority >= CEE_DCBX_MAX_PRIO) {
+ netdev_err(netdev,
+ "%s, priority is out of range\n", __func__);
+ return;
+ }
+
+ *prio_type = 0;
+ *bw_pct = 0;
+ *up_map = 0;
+
+ if (mlx5_query_port_prio_tc(mdev, priority, pgid))
+ *pgid = 0;
+}
+
+static void mlx5e_dcbnl_getpgbwgcfgtx(struct net_device *netdev,
+ int pgid, u8 *bw_pct)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5_core_dev *mdev = priv->mdev;
+
+ if (pgid >= CEE_DCBX_MAX_PGS) {
+ netdev_err(netdev,
+ "%s, priority group is out of range\n", __func__);
+ return;
+ }
+
+ if (mlx5_query_port_tc_bw_alloc(mdev, pgid, bw_pct))
+ *bw_pct = 0;
+}
+
+static void mlx5e_dcbnl_setpfccfg(struct net_device *netdev,
+ int priority, u8 setting)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+
+ if (priority >= CEE_DCBX_MAX_PRIO) {
+ netdev_err(netdev,
+ "%s, priority is out of range\n", __func__);
+ return;
+ }
+
+ if (setting > 1)
+ return;
+
+ cee_cfg->pfc_setting[priority] = setting;
+}
+
+static int
+mlx5e_dcbnl_get_priority_pfc(struct net_device *netdev,
+ int priority, u8 *setting)
+{
+ struct ieee_pfc pfc;
+ int err;
+
+ err = mlx5e_dcbnl_ieee_getpfc(netdev, &pfc);
+
+ if (err)
+ *setting = 0;
+ else
+ *setting = (pfc.pfc_en >> priority) & 0x01;
+
+ return err;
+}
+
+static void mlx5e_dcbnl_getpfccfg(struct net_device *netdev,
+ int priority, u8 *setting)
+{
+ if (priority >= CEE_DCBX_MAX_PRIO) {
+ netdev_err(netdev,
+ "%s, priority is out of range\n", __func__);
+ return;
+ }
+
+ if (!setting)
+ return;
+
+ mlx5e_dcbnl_get_priority_pfc(netdev, priority, setting);
+}
+
+static u8 mlx5e_dcbnl_getcap(struct net_device *netdev,
+ int capid, u8 *cap)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5_core_dev *mdev = priv->mdev;
+ u8 rval = 0;
+
+ switch (capid) {
+ case DCB_CAP_ATTR_PG:
+ *cap = true;
+ break;
+ case DCB_CAP_ATTR_PFC:
+ *cap = true;
+ break;
+ case DCB_CAP_ATTR_UP2TC:
+ *cap = false;
+ break;
+ case DCB_CAP_ATTR_PG_TCS:
+ *cap = 1 << mlx5_max_tc(mdev);
+ break;
+ case DCB_CAP_ATTR_PFC_TCS:
+ *cap = 1 << mlx5_max_tc(mdev);
+ break;
+ case DCB_CAP_ATTR_GSP:
+ *cap = false;
+ break;
+ case DCB_CAP_ATTR_BCN:
+ *cap = false;
+ break;
+ case DCB_CAP_ATTR_DCBX:
+ *cap = (DCB_CAP_DCBX_LLD_MANAGED |
+ DCB_CAP_DCBX_VER_CEE |
+ DCB_CAP_DCBX_STATIC);
+ break;
+ default:
+ *cap = 0;
+ rval = 1;
+ break;
+ }
+
+ return rval;
+}
+
+static int mlx5e_dcbnl_getnumtcs(struct net_device *netdev,
+ int tcs_id, u8 *num)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5_core_dev *mdev = priv->mdev;
+
+ switch (tcs_id) {
+ case DCB_NUMTCS_ATTR_PG:
+ case DCB_NUMTCS_ATTR_PFC:
+ *num = mlx5_max_tc(mdev) + 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static u8 mlx5e_dcbnl_getpfcstate(struct net_device *netdev)
+{
+ struct ieee_pfc pfc;
+
+ if (mlx5e_dcbnl_ieee_getpfc(netdev, &pfc))
+ return MLX5E_CEE_STATE_DOWN;
+
+ return pfc.pfc_en ? MLX5E_CEE_STATE_UP : MLX5E_CEE_STATE_DOWN;
+}
+
+static void mlx5e_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+
+ if ((state != MLX5E_CEE_STATE_UP) && (state != MLX5E_CEE_STATE_DOWN))
+ return;
+
+ cee_cfg->pfc_enable = state;
+}
+
const struct dcbnl_rtnl_ops mlx5e_dcbnl_ops = {
.ieee_getets = mlx5e_dcbnl_ieee_getets,
.ieee_setets = mlx5e_dcbnl_ieee_setets,
@@ -313,4 +593,21 @@ const struct dcbnl_rtnl_ops mlx5e_dcbnl_ops = {
.ieee_setpfc = mlx5e_dcbnl_ieee_setpfc,
.getdcbx = mlx5e_dcbnl_getdcbx,
.setdcbx = mlx5e_dcbnl_setdcbx,
+
+/* CEE interfaces */
+ .setall = mlx5e_dcbnl_setall,
+ .getstate = mlx5e_dcbnl_getstate,
+ .getpermhwaddr = mlx5e_dcbnl_getpermhwaddr,
+
+ .setpgtccfgtx = mlx5e_dcbnl_setpgtccfgtx,
+ .setpgbwgcfgtx = mlx5e_dcbnl_setpgbwgcfgtx,
+ .getpgtccfgtx = mlx5e_dcbnl_getpgtccfgtx,
+ .getpgbwgcfgtx = mlx5e_dcbnl_getpgbwgcfgtx,
+
+ .setpfccfg = mlx5e_dcbnl_setpfccfg,
+ .getpfccfg = mlx5e_dcbnl_getpfccfg,
+ .getcap = mlx5e_dcbnl_getcap,
+ .getnumtcs = mlx5e_dcbnl_getnumtcs,
+ .getpfcstate = mlx5e_dcbnl_getpfcstate,
+ .setpfcstate = mlx5e_dcbnl_setpfcstate,
};
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 34e7184..2f75f86 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -572,6 +572,28 @@ int mlx5_set_port_prio_tc(struct mlx5_core_dev *mdev, u8 *prio_tc)
}
EXPORT_SYMBOL_GPL(mlx5_set_port_prio_tc);
+int mlx5_query_port_prio_tc(struct mlx5_core_dev *mdev,
+ u8 prio, u8 *tc)
+{
+ u32 in[MLX5_ST_SZ_DW(qtct_reg)];
+ u32 out[MLX5_ST_SZ_DW(qtct_reg)];
+ int err;
+
+ memset(in, 0, sizeof(in));
+ memset(out, 0, sizeof(out));
+
+ MLX5_SET(qtct_reg, in, port_number, 1);
+ MLX5_SET(qtct_reg, in, prio, prio);
+
+ err = mlx5_core_access_reg(mdev, in, sizeof(in), out,
+ sizeof(out), MLX5_REG_QTCT, 0, 0);
+ if (!err)
+ *tc = MLX5_GET(qtct_reg, out, tclass);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(mlx5_query_port_prio_tc);
+
static int mlx5_set_port_qetcr_reg(struct mlx5_core_dev *mdev, u32 *in,
int inlen)
{
@@ -625,6 +647,27 @@ int mlx5_set_port_tc_bw_alloc(struct mlx5_core_dev *mdev, u8 *tc_bw)
}
EXPORT_SYMBOL_GPL(mlx5_set_port_tc_bw_alloc);
+int mlx5_query_port_tc_bw_alloc(struct mlx5_core_dev *mdev,
+ u8 tc, u8 *bw_pct)
+{
+ u32 out[MLX5_ST_SZ_DW(qetc_reg)];
+ void *ets_tcn_conf;
+ int err;
+
+ err = mlx5_query_port_qetcr_reg(mdev, out, sizeof(out));
+ if (err)
+ return err;
+
+ ets_tcn_conf = MLX5_ADDR_OF(qetc_reg, out,
+ tc_configuration[tc]);
+
+ *bw_pct = MLX5_GET(ets_tcn_config_reg, ets_tcn_conf,
+ bw_allocation);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mlx5_query_port_tc_bw_alloc);
+
int mlx5_modify_port_ets_rate_limit(struct mlx5_core_dev *mdev,
u8 *max_bw_value,
u8 *max_bw_units)
diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h
index b3065ac..ddad24d 100644
--- a/include/linux/mlx5/port.h
+++ b/include/linux/mlx5/port.h
@@ -138,8 +138,12 @@ int mlx5_query_port_pfc(struct mlx5_core_dev *dev, u8 *pfc_en_tx,
int mlx5_max_tc(struct mlx5_core_dev *mdev);
int mlx5_set_port_prio_tc(struct mlx5_core_dev *mdev, u8 *prio_tc);
+int mlx5_query_port_prio_tc(struct mlx5_core_dev *mdev,
+ u8 prio, u8 *tc);
int mlx5_set_port_tc_group(struct mlx5_core_dev *mdev, u8 *tc_group);
int mlx5_set_port_tc_bw_alloc(struct mlx5_core_dev *mdev, u8 *tc_bw);
+int mlx5_query_port_tc_bw_alloc(struct mlx5_core_dev *mdev,
+ u8 tc, u8 *bw_pct);
int mlx5_modify_port_ets_rate_limit(struct mlx5_core_dev *mdev,
u8 *max_bw_value,
u8 *max_bw_unit);
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH net-next V2 3/6] net/mlx5e: Read ETS settings directly from firmware
2016-09-06 16:04 [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
2016-09-06 16:04 ` [PATCH net-next V2 1/6] net/mlx5e: Add qos capability check Saeed Mahameed
2016-09-06 16:04 ` [PATCH net-next V2 2/6] net/mlx5e: Support DCBX CEE API Saeed Mahameed
@ 2016-09-06 16:04 ` Saeed Mahameed
2016-09-06 16:26 ` Or Gerlitz
2016-09-06 16:04 ` [PATCH net-next V2 4/6] net/mlx5: Add DCBX firmware commands support Saeed Mahameed
` (3 subsequent siblings)
6 siblings, 1 reply; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-06 16:04 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Huy Nguyen, Or Gerlitz, Saeed Mahameed
From: Huy Nguyen <huyn@mellanox.com>
Issue description:
Current implementation saves the ETS settings from user in
a temporal soft copy and returns this settings when user
queries the ETS settings.
With the new DCBX firmware, the ETS settings can be changed
by firmware when the DCBX is in firmware controlled mode. Therefore,
user will obtain wrong values from the temporal soft copy.
Solution:
1. Read the ETS settings directly from firmware.
2. For tc_tsa:
a. Initialize tc_tsa to vendor IEEE_8021QAZ_TSA_VENDOR at netdev
creation.
b. When reading ETS setting from FW, if the traffic class bandwidth
is less than 100, set tc_tsa to IEEE_8021QAZ_TSA_ETS. This
implementation solves the scenarios when the DCBX is in FW control
and willing bit is on which means the ETS setting is dictated
by remote switch.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 6 ++--
drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 35 ++++++++++++++++++----
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 26 ++++++++--------
3 files changed, 46 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 6919e3c..0d41287 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -203,9 +203,6 @@ struct mlx5e_params {
u8 toeplitz_hash_key[40];
u32 indirection_rqt[MLX5E_INDIR_RQT_SIZE];
bool vlan_strip_disable;
-#ifdef CONFIG_MLX5_CORE_EN_DCB
- struct ieee_ets ets;
-#endif
bool rx_am_enabled;
};
@@ -226,6 +223,9 @@ enum {
struct mlx5e_dcbx {
struct mlx5e_cee_config cee_cfg; /* pending configuration */
+
+ /* The only setting that cannot be read from FW */
+ u8 tc_tsa[IEEE_8021QAZ_MAX_TCS];
};
#endif
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 0595243..8f6b5a7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -45,12 +45,31 @@ static int mlx5e_dcbnl_ieee_getets(struct net_device *netdev,
struct ieee_ets *ets)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5_core_dev *mdev = priv->mdev;
+ int i;
+ int err = 0;
if (!MLX5_CAP_GEN(priv->mdev, ets))
return -ENOTSUPP;
- memcpy(ets, &priv->params.ets, sizeof(*ets));
- return 0;
+ ets->ets_cap = mlx5_max_tc(priv->mdev) + 1;
+ for (i = 0; i < ets->ets_cap; i++) {
+ err = mlx5_query_port_prio_tc(mdev, i, &ets->prio_tc[i]);
+ if (err)
+ return err;
+ }
+
+ for (i = 0; i < ets->ets_cap; i++) {
+ err = mlx5_query_port_tc_bw_alloc(mdev, i, &ets->tc_tx_bw[i]);
+ if (err)
+ return err;
+ if (ets->tc_tx_bw[i] < MLX5E_MAX_BW_ALLOC)
+ priv->dcbx.tc_tsa[i] = IEEE_8021QAZ_TSA_ETS;
+ }
+
+ memcpy(ets->tc_tsa, priv->dcbx.tc_tsa, sizeof(ets->tc_tsa));
+
+ return err;
}
enum {
@@ -127,7 +146,14 @@ int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets)
if (err)
return err;
- return mlx5_set_port_tc_bw_alloc(mdev, tc_tx_bw);
+ err = mlx5_set_port_tc_bw_alloc(mdev, tc_tx_bw);
+
+ if (err)
+ return err;
+
+ memcpy(priv->dcbx.tc_tsa, ets->tc_tsa, sizeof(ets->tc_tsa));
+
+ return err;
}
static int mlx5e_dbcnl_validate_ets(struct net_device *netdev,
@@ -181,9 +207,6 @@ static int mlx5e_dcbnl_ieee_setets(struct net_device *netdev,
if (err)
return err;
- memcpy(&priv->params.ets, ets, sizeof(*ets));
- priv->params.ets.ets_cap = mlx5_max_tc(priv->mdev) + 1;
-
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 3b05810..da70ef3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2875,17 +2875,23 @@ u16 mlx5e_get_max_inline_cap(struct mlx5_core_dev *mdev)
static void mlx5e_ets_init(struct mlx5e_priv *priv)
{
int i;
+ struct ieee_ets ets;
- priv->params.ets.ets_cap = mlx5_max_tc(priv->mdev) + 1;
- for (i = 0; i < priv->params.ets.ets_cap; i++) {
- priv->params.ets.tc_tx_bw[i] = MLX5E_MAX_BW_ALLOC;
- priv->params.ets.tc_tsa[i] = IEEE_8021QAZ_TSA_VENDOR;
- priv->params.ets.prio_tc[i] = i;
+ memset(&ets, 0, sizeof(ets));
+ ets.ets_cap = mlx5_max_tc(priv->mdev) + 1;
+ for (i = 0; i < ets.ets_cap; i++) {
+ ets.tc_tx_bw[i] = MLX5E_MAX_BW_ALLOC;
+ ets.tc_tsa[i] = IEEE_8021QAZ_TSA_VENDOR;
+ ets.prio_tc[i] = i;
}
+ memcpy(priv->dcbx.tc_tsa, ets.tc_tsa, sizeof(ets.tc_tsa));
+
/* tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1) */
- priv->params.ets.prio_tc[0] = 1;
- priv->params.ets.prio_tc[1] = 0;
+ ets.prio_tc[0] = 1;
+ ets.prio_tc[1] = 0;
+
+ mlx5e_dcbnl_ieee_setets_core(priv, &ets);
}
#endif
@@ -3071,10 +3077,6 @@ static void mlx5e_build_nic_netdev_priv(struct mlx5_core_dev *mdev,
priv->profile = profile;
priv->ppriv = ppriv;
-#ifdef CONFIG_MLX5_CORE_EN_DCB
- mlx5e_ets_init(priv);
-#endif
-
mutex_init(&priv->state_lock);
INIT_WORK(&priv->update_carrier_work, mlx5e_update_carrier_work);
@@ -3348,7 +3350,7 @@ static int mlx5e_init_nic_tx(struct mlx5e_priv *priv)
}
#ifdef CONFIG_MLX5_CORE_EN_DCB
- mlx5e_dcbnl_ieee_setets_core(priv, &priv->params.ets);
+ mlx5e_ets_init(priv);
#endif
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH net-next V2 3/6] net/mlx5e: Read ETS settings directly from firmware
2016-09-06 16:04 ` [PATCH net-next V2 3/6] net/mlx5e: Read ETS settings directly from firmware Saeed Mahameed
@ 2016-09-06 16:26 ` Or Gerlitz
0 siblings, 0 replies; 15+ messages in thread
From: Or Gerlitz @ 2016-09-06 16:26 UTC (permalink / raw)
To: Saeed Mahameed, Huy Nguyen; +Cc: David S. Miller, Linux Netdev List, Or Gerlitz
On Tue, Sep 6, 2016 at 7:04 PM, Saeed Mahameed <saeedm@mellanox.com> wrote:
> From: Huy Nguyen <huyn@mellanox.com>
>
> Issue description:
> Current implementation saves the ETS settings from user in
> a temporal soft copy and returns this settings when user
> queries the ETS settings.
>
> With the new DCBX firmware, the ETS settings can be changed
> by firmware when the DCBX is in firmware controlled mode. Therefore,
> user will obtain wrong values from the temporal soft copy.
Can this happen also with V2? I thought that when you dropped the
private flag it means that this hybrid mode
isn't exposed now, please clarify.
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH net-next V2 4/6] net/mlx5: Add DCBX firmware commands support
2016-09-06 16:04 [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
` (2 preceding siblings ...)
2016-09-06 16:04 ` [PATCH net-next V2 3/6] net/mlx5e: Read ETS settings directly from firmware Saeed Mahameed
@ 2016-09-06 16:04 ` Saeed Mahameed
2016-09-06 16:04 ` [PATCH net-next V2 5/6] net/mlx5e: ConnectX-4 firmware support for DCBX Saeed Mahameed
` (2 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-06 16:04 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Huy Nguyen, Or Gerlitz, Saeed Mahameed
From: Huy Nguyen <huyn@mellanox.com>
Add set/query commands for DCBX_PARAM register
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/port.c | 20 ++++++++++++++++++++
include/linux/mlx5/driver.h | 7 +++++++
include/linux/mlx5/port.h | 2 ++
3 files changed, 29 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 2f75f86..8d409b2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -548,6 +548,26 @@ int mlx5_max_tc(struct mlx5_core_dev *mdev)
return num_tc - 1;
}
+int mlx5_query_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *out)
+{
+ u32 in[MLX5_ST_SZ_DW(dcbx_param)] = {0};
+
+ MLX5_SET(dcbx_param, in, port_number, 1);
+
+ return mlx5_core_access_reg(mdev, in, sizeof(in), out,
+ sizeof(in), MLX5_REG_DCBX_PARAM, 0, 0);
+}
+
+int mlx5_set_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *in)
+{
+ u32 out[MLX5_ST_SZ_DW(dcbx_param)];
+
+ MLX5_SET(dcbx_param, in, port_number, 1);
+
+ return mlx5_core_access_reg(mdev, in, sizeof(out), out,
+ sizeof(out), MLX5_REG_DCBX_PARAM, 0, 1);
+}
+
int mlx5_set_port_prio_tc(struct mlx5_core_dev *mdev, u8 *prio_tc)
{
u32 in[MLX5_ST_SZ_DW(qtct_reg)] = {0};
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 5cb9fa7..b53f19c 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -104,6 +104,8 @@ enum {
enum {
MLX5_REG_QETCR = 0x4005,
MLX5_REG_QTCT = 0x400a,
+ MLX5_REG_DCBX_PARAM = 0x4020,
+ MLX5_REG_DCBX_APP = 0x4021,
MLX5_REG_PCAP = 0x5001,
MLX5_REG_PMTU = 0x5003,
MLX5_REG_PTYS = 0x5004,
@@ -123,6 +125,11 @@ enum {
MLX5_REG_MLCR = 0x902b,
};
+enum mlx5_dcbx_oper_mode {
+ MLX5E_DCBX_PARAM_VER_OPER_HOST = 0x0,
+ MLX5E_DCBX_PARAM_VER_OPER_AUTO = 0x3,
+};
+
enum {
MLX5_ATOMIC_OPS_CMP_SWAP = 1 << 0,
MLX5_ATOMIC_OPS_FETCH_ADD = 1 << 1,
diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h
index ddad24d..62e2259 100644
--- a/include/linux/mlx5/port.h
+++ b/include/linux/mlx5/port.h
@@ -159,4 +159,6 @@ void mlx5_query_port_fcs(struct mlx5_core_dev *mdev, bool *supported,
int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
u16 offset, u16 size, u8 *data);
+int mlx5_query_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *out);
+int mlx5_set_port_dcbx_param(struct mlx5_core_dev *mdev, u32 *in);
#endif /* __MLX5_PORT_H__ */
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH net-next V2 5/6] net/mlx5e: ConnectX-4 firmware support for DCBX
2016-09-06 16:04 [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
` (3 preceding siblings ...)
2016-09-06 16:04 ` [PATCH net-next V2 4/6] net/mlx5: Add DCBX firmware commands support Saeed Mahameed
@ 2016-09-06 16:04 ` Saeed Mahameed
2016-09-06 16:04 ` [PATCH net-next V2 6/6] net/mlx5: Add handling for port module event Saeed Mahameed
2016-09-07 20:16 ` [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
6 siblings, 0 replies; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-06 16:04 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Huy Nguyen, Or Gerlitz, Saeed Mahameed
From: Huy Nguyen <huyn@mellanox.com>
DBCX by default is controlled by firmware. In this
mode, firmware is responsible for reading/sending the TLVs packets
from/to the remote partner. When the driver is loaded, the driver
can leave the DCBX in firmware controlled mode or
switch the DCBX back to host controlled mode.
This patch sets up the infrastructure to support changing
DCBX control mode.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 6 +
drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 147 +++++++++++++++++++++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 26 +---
3 files changed, 154 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 0d41287..806f5e8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -222,6 +222,7 @@ enum {
};
struct mlx5e_dcbx {
+ enum mlx5_dcbx_oper_mode mode;
struct mlx5e_cee_config cee_cfg; /* pending configuration */
/* The only setting that cannot be read from FW */
@@ -810,6 +811,11 @@ extern const struct ethtool_ops mlx5e_ethtool_ops;
#ifdef CONFIG_MLX5_CORE_EN_DCB
extern const struct dcbnl_rtnl_ops mlx5e_dcbnl_ops;
int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets);
+int mlx5e_dcbnl_set_dcbx_mode(struct mlx5e_priv *priv,
+ enum mlx5_dcbx_oper_mode mode);
+void mlx5e_dcbnl_query_dcbx_mode(struct mlx5e_priv *priv,
+ enum mlx5_dcbx_oper_mode *mode);
+void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv);
#endif
#ifndef CONFIG_RFS_ACCEL
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 8f6b5a7..c33cdba 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -41,6 +41,26 @@
#define MLX5E_CEE_STATE_UP 1
#define MLX5E_CEE_STATE_DOWN 0
+/* If dcbx mode is non-host and qos_with_dcbx_by_fw is off, set the
+ * dcbx mode to host.
+ */
+static inline bool mlx5e_dcbnl_is_allowed(struct mlx5e_priv *priv)
+{
+ struct mlx5e_dcbx *dcbx = &priv->dcbx;
+
+ if (!MLX5_CAP_GEN(priv->mdev, dcbx))
+ return true;
+
+ if (dcbx->mode == MLX5E_DCBX_PARAM_VER_OPER_HOST)
+ return true;
+
+ if (mlx5e_dcbnl_set_dcbx_mode(priv, MLX5E_DCBX_PARAM_VER_OPER_HOST))
+ return false;
+
+ dcbx->mode = MLX5E_DCBX_PARAM_VER_OPER_HOST;
+ return true;
+}
+
static int mlx5e_dcbnl_ieee_getets(struct net_device *netdev,
struct ieee_ets *ets)
{
@@ -52,6 +72,9 @@ static int mlx5e_dcbnl_ieee_getets(struct net_device *netdev,
if (!MLX5_CAP_GEN(priv->mdev, ets))
return -ENOTSUPP;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return -EPERM;
+
ets->ets_cap = mlx5_max_tc(priv->mdev) + 1;
for (i = 0; i < ets->ets_cap; i++) {
err = mlx5_query_port_prio_tc(mdev, i, &ets->prio_tc[i]);
@@ -199,6 +222,12 @@ static int mlx5e_dcbnl_ieee_setets(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
int err;
+ if (!MLX5_CAP_GEN(priv->mdev, ets))
+ return -ENOTSUPP;
+
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return -EPERM;
+
err = mlx5e_dbcnl_validate_ets(netdev, ets);
if (err)
return err;
@@ -218,6 +247,9 @@ static int mlx5e_dcbnl_ieee_getpfc(struct net_device *dev,
struct mlx5e_pport_stats *pstats = &priv->stats.pport;
int i;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return -EPERM;
+
pfc->pfc_cap = mlx5_max_tc(mdev) + 1;
for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
pfc->requests[i] = PPORT_PER_PRIO_GET(pstats, i, tx_pause);
@@ -235,6 +267,9 @@ static int mlx5e_dcbnl_ieee_setpfc(struct net_device *dev,
u8 curr_pfc_en;
int ret;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return -EPERM;
+
mlx5_query_port_pfc(mdev, &curr_pfc_en, NULL);
if (pfc->pfc_en == curr_pfc_en)
@@ -255,6 +290,9 @@ static u8 mlx5e_dcbnl_getdcbx(struct net_device *dev)
static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode)
{
+ if (!mlx5e_dcbnl_is_allowed(netdev_priv(dev)))
+ return 1;
+
if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
!(mode & DCB_CAP_DCBX_VER_CEE) ||
!(mode & DCB_CAP_DCBX_VER_IEEE) ||
@@ -274,6 +312,9 @@ static int mlx5e_dcbnl_ieee_getmaxrate(struct net_device *netdev,
int err;
int i;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return -EPERM;
+
err = mlx5_query_port_ets_rate_limit(mdev, max_bw_value, max_bw_unit);
if (err)
return err;
@@ -309,6 +350,9 @@ static int mlx5e_dcbnl_ieee_setmaxrate(struct net_device *netdev,
__u64 upper_limit_mbps = roundup(255 * MLX5E_100MB, MLX5E_1GB);
int i;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return -EPERM;
+
memset(max_bw_value, 0, sizeof(max_bw_value));
memset(max_bw_unit, 0, sizeof(max_bw_unit));
@@ -342,6 +386,9 @@ static u8 mlx5e_dcbnl_setall(struct net_device *netdev)
int err;
int i;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return MLX5_DCB_NO_CHG;
+
memset(&ets, 0, sizeof(ets));
memset(&pfc, 0, sizeof(pfc));
@@ -395,6 +442,9 @@ static void mlx5e_dcbnl_getpermhwaddr(struct net_device *netdev,
{
struct mlx5e_priv *priv = netdev_priv(netdev);
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return;
+
if (!perm_addr)
return;
@@ -408,6 +458,9 @@ static void mlx5e_dcbnl_setpgtccfgtx(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return;
+
if (priority >= CEE_DCBX_MAX_PRIO) {
netdev_err(netdev,
"%s, priority is out of range\n", __func__);
@@ -429,6 +482,9 @@ static void mlx5e_dcbnl_setpgbwgcfgtx(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return;
+
if (pgid >= CEE_DCBX_MAX_PGS) {
netdev_err(netdev,
"%s, priority group is out of range\n", __func__);
@@ -445,6 +501,9 @@ static void mlx5e_dcbnl_getpgtccfgtx(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return;
+
if (priority >= CEE_DCBX_MAX_PRIO) {
netdev_err(netdev,
"%s, priority is out of range\n", __func__);
@@ -465,6 +524,9 @@ static void mlx5e_dcbnl_getpgbwgcfgtx(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return;
+
if (pgid >= CEE_DCBX_MAX_PGS) {
netdev_err(netdev,
"%s, priority group is out of range\n", __func__);
@@ -481,6 +543,9 @@ static void mlx5e_dcbnl_setpfccfg(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return;
+
if (priority >= CEE_DCBX_MAX_PRIO) {
netdev_err(netdev,
"%s, priority is out of range\n", __func__);
@@ -513,6 +578,9 @@ mlx5e_dcbnl_get_priority_pfc(struct net_device *netdev,
static void mlx5e_dcbnl_getpfccfg(struct net_device *netdev,
int priority, u8 *setting)
{
+ if (!mlx5e_dcbnl_is_allowed(netdev_priv(netdev)))
+ return;
+
if (priority >= CEE_DCBX_MAX_PRIO) {
netdev_err(netdev,
"%s, priority is out of range\n", __func__);
@@ -532,6 +600,9 @@ static u8 mlx5e_dcbnl_getcap(struct net_device *netdev,
struct mlx5_core_dev *mdev = priv->mdev;
u8 rval = 0;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return 1;
+
switch (capid) {
case DCB_CAP_ATTR_PG:
*cap = true;
@@ -574,6 +645,9 @@ static int mlx5e_dcbnl_getnumtcs(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return -EPERM;
+
switch (tcs_id) {
case DCB_NUMTCS_ATTR_PG:
case DCB_NUMTCS_ATTR_PFC:
@@ -590,6 +664,9 @@ static u8 mlx5e_dcbnl_getpfcstate(struct net_device *netdev)
{
struct ieee_pfc pfc;
+ if (!mlx5e_dcbnl_is_allowed(netdev_priv(netdev)))
+ return MLX5E_CEE_STATE_DOWN;
+
if (mlx5e_dcbnl_ieee_getpfc(netdev, &pfc))
return MLX5E_CEE_STATE_DOWN;
@@ -601,6 +678,9 @@ static void mlx5e_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5e_cee_config *cee_cfg = &priv->dcbx.cee_cfg;
+ if (!mlx5e_dcbnl_is_allowed(priv))
+ return;
+
if ((state != MLX5E_CEE_STATE_UP) && (state != MLX5E_CEE_STATE_DOWN))
return;
@@ -634,3 +714,70 @@ const struct dcbnl_rtnl_ops mlx5e_dcbnl_ops = {
.getpfcstate = mlx5e_dcbnl_getpfcstate,
.setpfcstate = mlx5e_dcbnl_setpfcstate,
};
+
+void mlx5e_dcbnl_query_dcbx_mode(struct mlx5e_priv *priv,
+ enum mlx5_dcbx_oper_mode *mode)
+{
+ u32 out[MLX5_ST_SZ_DW(dcbx_param)];
+
+ *mode = MLX5E_DCBX_PARAM_VER_OPER_HOST;
+
+ if (!mlx5_query_port_dcbx_param(priv->mdev, out))
+ *mode = MLX5_GET(dcbx_param, out, version_oper);
+
+ /* From driver's point of view, we only care if the mode
+ * is host (HOST) or non-host (AUTO)
+ */
+ if (*mode != MLX5E_DCBX_PARAM_VER_OPER_HOST)
+ *mode = MLX5E_DCBX_PARAM_VER_OPER_AUTO;
+}
+
+int mlx5e_dcbnl_set_dcbx_mode(struct mlx5e_priv *priv,
+ enum mlx5_dcbx_oper_mode mode)
+{
+ struct mlx5_core_dev *mdev = priv->mdev;
+ u32 tmp[MLX5_ST_SZ_DW(dcbx_param)];
+ int err;
+
+ err = mlx5_query_port_dcbx_param(mdev, tmp);
+ if (err)
+ return err;
+
+ MLX5_SET(dcbx_param, tmp, version_admin, mode);
+ if (mode != MLX5E_DCBX_PARAM_VER_OPER_HOST)
+ MLX5_SET(dcbx_param, tmp, willing_admin, 1);
+
+ return mlx5_set_port_dcbx_param(mdev, tmp);
+}
+
+static void mlx5e_ets_init(struct mlx5e_priv *priv)
+{
+ int i;
+ struct ieee_ets ets;
+
+ memset(&ets, 0, sizeof(ets));
+ ets.ets_cap = mlx5_max_tc(priv->mdev) + 1;
+ for (i = 0; i < ets.ets_cap; i++) {
+ ets.tc_tx_bw[i] = MLX5E_MAX_BW_ALLOC;
+ ets.tc_tsa[i] = IEEE_8021QAZ_TSA_VENDOR;
+ ets.prio_tc[i] = i;
+ }
+
+ memcpy(priv->dcbx.tc_tsa, ets.tc_tsa, sizeof(ets.tc_tsa));
+
+ /* tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1) */
+ ets.prio_tc[0] = 1;
+ ets.prio_tc[1] = 0;
+
+ mlx5e_dcbnl_ieee_setets_core(priv, &ets);
+}
+
+void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv)
+{
+ struct mlx5e_dcbx *dcbx = &priv->dcbx;
+
+ if (MLX5_CAP_GEN(priv->mdev, dcbx))
+ mlx5e_dcbnl_query_dcbx_mode(priv, &dcbx->mode);
+
+ mlx5e_ets_init(priv);
+}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index da70ef3..469456c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2871,30 +2871,6 @@ u16 mlx5e_get_max_inline_cap(struct mlx5_core_dev *mdev)
2 /*sizeof(mlx5e_tx_wqe.inline_hdr_start)*/;
}
-#ifdef CONFIG_MLX5_CORE_EN_DCB
-static void mlx5e_ets_init(struct mlx5e_priv *priv)
-{
- int i;
- struct ieee_ets ets;
-
- memset(&ets, 0, sizeof(ets));
- ets.ets_cap = mlx5_max_tc(priv->mdev) + 1;
- for (i = 0; i < ets.ets_cap; i++) {
- ets.tc_tx_bw[i] = MLX5E_MAX_BW_ALLOC;
- ets.tc_tsa[i] = IEEE_8021QAZ_TSA_VENDOR;
- ets.prio_tc[i] = i;
- }
-
- memcpy(priv->dcbx.tc_tsa, ets.tc_tsa, sizeof(ets.tc_tsa));
-
- /* tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1) */
- ets.prio_tc[0] = 1;
- ets.prio_tc[1] = 0;
-
- mlx5e_dcbnl_ieee_setets_core(priv, &ets);
-}
-#endif
-
void mlx5e_build_default_indir_rqt(struct mlx5_core_dev *mdev,
u32 *indirection_rqt, int len,
int num_channels)
@@ -3350,7 +3326,7 @@ static int mlx5e_init_nic_tx(struct mlx5e_priv *priv)
}
#ifdef CONFIG_MLX5_CORE_EN_DCB
- mlx5e_ets_init(priv);
+ mlx5e_dcbnl_initialize(priv);
#endif
return 0;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH net-next V2 6/6] net/mlx5: Add handling for port module event
2016-09-06 16:04 [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
` (4 preceding siblings ...)
2016-09-06 16:04 ` [PATCH net-next V2 5/6] net/mlx5e: ConnectX-4 firmware support for DCBX Saeed Mahameed
@ 2016-09-06 16:04 ` Saeed Mahameed
2016-09-06 16:15 ` Joe Perches
2016-09-07 20:16 ` [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
6 siblings, 1 reply; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-06 16:04 UTC (permalink / raw)
To: David S. Miller; +Cc: netdev, Huy Nguyen, Or Gerlitz, Saeed Mahameed
From: Huy Nguyen <huyn@mellanox.com>
Add dmesg log for asynchronous port module event.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/eq.c | 12 +++
.../net/ethernet/mellanox/mlx5/core/mlx5_core.h | 1 +
drivers/net/ethernet/mellanox/mlx5/core/port.c | 85 ++++++++++++++++++++++
include/linux/mlx5/device.h | 11 +++
include/linux/mlx5/mlx5_ifc.h | 3 +-
5 files changed, 111 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
index aaca090..d775fea 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
@@ -139,6 +139,8 @@ static const char *eqe_type_str(u8 type)
return "MLX5_EVENT_TYPE_PORT_CHANGE";
case MLX5_EVENT_TYPE_GPIO_EVENT:
return "MLX5_EVENT_TYPE_GPIO_EVENT";
+ case MLX5_EVENT_TYPE_PORT_MODULE_EVENT:
+ return "MLX5_EVENT_TYPE_PORT_MODULE_EVENT";
case MLX5_EVENT_TYPE_REMOTE_CONFIG:
return "MLX5_EVENT_TYPE_REMOTE_CONFIG";
case MLX5_EVENT_TYPE_DB_BF_CONGESTION:
@@ -285,6 +287,11 @@ static int mlx5_eq_int(struct mlx5_core_dev *dev, struct mlx5_eq *eq)
mlx5_eswitch_vport_event(dev->priv.eswitch, eqe);
break;
#endif
+
+ case MLX5_EVENT_TYPE_PORT_MODULE_EVENT:
+ mlx5_port_module_event(dev, eqe);
+ break;
+
default:
mlx5_core_warn(dev, "Unhandled event 0x%x on EQ 0x%x\n",
eqe->type, eq->eqn);
@@ -480,6 +487,11 @@ int mlx5_start_eqs(struct mlx5_core_dev *dev)
mlx5_core_is_pf(dev))
async_event_mask |= (1ull << MLX5_EVENT_TYPE_NIC_VPORT_CHANGE);
+ if (MLX5_CAP_GEN(dev, port_module_event))
+ async_event_mask |= (1ull << MLX5_EVENT_TYPE_PORT_MODULE_EVENT);
+ else
+ mlx5_core_dbg(dev, "port_module_event is not set\n");
+
err = mlx5_create_map_eq(dev, &table->cmd_eq, MLX5_EQ_VEC_CMD,
MLX5_NUM_CMD_EQE, 1ull << MLX5_EVENT_TYPE_CMD,
"mlx5_cmd_eq", &dev->priv.uuari.uars[0]);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index 714b71b..d023d05 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -87,6 +87,7 @@ int mlx5_cmd_init_hca(struct mlx5_core_dev *dev);
int mlx5_cmd_teardown_hca(struct mlx5_core_dev *dev);
void mlx5_core_event(struct mlx5_core_dev *dev, enum mlx5_dev_event event,
unsigned long param);
+void mlx5_port_module_event(struct mlx5_core_dev *dev, struct mlx5_eqe *eqe);
void mlx5_enter_error_state(struct mlx5_core_dev *dev);
void mlx5_disable_device(struct mlx5_core_dev *dev);
int mlx5_core_sriov_configure(struct pci_dev *dev, int num_vfs);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 8d409b2..e6d49d5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -36,6 +36,25 @@
#include <linux/mlx5/cmd.h>
#include "mlx5_core.h"
+#define PORT_MODULE_EVENT_MODULE_STATUS_MASK 0xF
+#define PORT_MODULE_EVENT_ERROR_TYPE_MASK 0xF
+enum {
+ MLX5_MODULE_STATUS_PLUGGED = 0x1,
+ MLX5_MODULE_STATUS_UNPLUGGED = 0x2,
+ MLX5_MODULE_STATUS_ERROR = 0x3,
+};
+
+enum {
+ MLX5_MODULE_EVENT_ERROR_POWER_BUDGET_EXCEEDED = 0x0,
+ MLX5_MODULE_EVENT_ERROR_LONG_RANGE_FOR_NON_MLNX_CABLE_MODULE = 0x1,
+ MLX5_MODULE_EVENT_ERROR_BUS_STUCK = 0x2,
+ MLX5_MODULE_EVENT_ERROR_NO_EEPROM_RETRY_TIMEOUT = 0x3,
+ MLX5_MODULE_EVENT_ERROR_ENFORCE_PART_NUMBER_LIST = 0x4,
+ MLX5_MODULE_EVENT_ERROR_UNKNOWN_IDENTIFIER = 0x5,
+ MLX5_MODULE_EVENT_ERROR_HIGH_TEMPERATURE = 0x6,
+ MLX5_MODULE_EVENT_ERROR_BAD_CABLE = 0x7,
+};
+
int mlx5_core_access_reg(struct mlx5_core_dev *dev, void *data_in,
int size_in, void *data_out, int size_out,
u16 reg_id, int arg, int write)
@@ -809,3 +828,69 @@ void mlx5_query_port_fcs(struct mlx5_core_dev *mdev, bool *supported,
*supported = !!(MLX5_GET(pcmr_reg, out, fcs_cap));
*enabled = !!(MLX5_GET(pcmr_reg, out, fcs_chk));
}
+
+static const char *mlx5_port_event_error_type_to_string(u8 error_type)
+{
+ switch (error_type) {
+ case MLX5_MODULE_EVENT_ERROR_POWER_BUDGET_EXCEEDED:
+ return "Power Budget Exceeded";
+
+ case MLX5_MODULE_EVENT_ERROR_LONG_RANGE_FOR_NON_MLNX_CABLE_MODULE:
+ return "Long Range for non MLNX cable/module";
+
+ case MLX5_MODULE_EVENT_ERROR_BUS_STUCK:
+ return "Bus stuck(I2C or data shorted)";
+
+ case MLX5_MODULE_EVENT_ERROR_NO_EEPROM_RETRY_TIMEOUT:
+ return "No EEPROM/retry timeout";
+
+ case MLX5_MODULE_EVENT_ERROR_ENFORCE_PART_NUMBER_LIST:
+ return "Enforce part number list";
+
+ case MLX5_MODULE_EVENT_ERROR_UNKNOWN_IDENTIFIER:
+ return "Unknown identifier";
+
+ case MLX5_MODULE_EVENT_ERROR_HIGH_TEMPERATURE:
+ return "High Temperature";
+
+ case MLX5_MODULE_EVENT_ERROR_BAD_CABLE:
+ return "Bad cable (module/cable is shorted)";
+
+ default:
+ return "Unknown error type";
+ }
+}
+
+void mlx5_port_module_event(struct mlx5_core_dev *dev, struct mlx5_eqe *eqe)
+{
+ struct mlx5_eqe_port_module *module_event_eqe;
+ u8 module_status;
+ u8 module_num;
+ u8 error_type;
+
+ module_event_eqe = &eqe->data.port_module;
+ module_num = module_event_eqe->module;
+ module_status = module_event_eqe->module_status &
+ PORT_MODULE_EVENT_MODULE_STATUS_MASK;
+ error_type = module_event_eqe->error_type &
+ PORT_MODULE_EVENT_ERROR_TYPE_MASK;
+
+ switch (module_status) {
+ case MLX5_MODULE_STATUS_PLUGGED:
+ mlx5_core_info(dev, "Module %u, status: plugged", module_num);
+ break;
+
+ case MLX5_MODULE_STATUS_UNPLUGGED:
+ mlx5_core_info(dev, "Module %u, status: unplugged", module_num);
+ break;
+
+ case MLX5_MODULE_STATUS_ERROR:
+ mlx5_core_info(dev, "Module %u, status: error, %s", module_num,
+ mlx5_port_event_error_type_to_string(error_type));
+ break;
+
+ default:
+ mlx5_core_info(dev, "Module %u, unknown module status %x",
+ module_num, module_status);
+ }
+}
diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 77c1417..e43eb22 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -268,6 +268,7 @@ enum mlx5_event {
MLX5_EVENT_TYPE_INTERNAL_ERROR = 0x08,
MLX5_EVENT_TYPE_PORT_CHANGE = 0x09,
MLX5_EVENT_TYPE_GPIO_EVENT = 0x15,
+ MLX5_EVENT_TYPE_PORT_MODULE_EVENT = 0x16,
MLX5_EVENT_TYPE_REMOTE_CONFIG = 0x19,
MLX5_EVENT_TYPE_DB_BF_CONGESTION = 0x1a,
@@ -543,6 +544,15 @@ struct mlx5_eqe_vport_change {
__be32 rsvd1[6];
} __packed;
+struct mlx5_eqe_port_module {
+ u8 reserved_at_0[1];
+ u8 module;
+ u8 reserved_at_2[1];
+ u8 module_status;
+ u8 reserved_at_4[2];
+ u8 error_type;
+};
+
union ev_data {
__be32 raw[7];
struct mlx5_eqe_cmd cmd;
@@ -556,6 +566,7 @@ union ev_data {
struct mlx5_eqe_page_req req_pages;
struct mlx5_eqe_page_fault page_fault;
struct mlx5_eqe_vport_change vport_change;
+ struct mlx5_eqe_port_module port_module;
} __packed;
struct mlx5_eqe {
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 73a720f..57eaee3 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -804,7 +804,8 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 early_vf_enable[0x1];
u8 reserved_at_1a9[0x2];
u8 local_ca_ack_delay[0x5];
- u8 reserved_at_1af[0x2];
+ u8 port_module_event[0x1];
+ u8 reserved_at_1b0[0x1];
u8 ports_check[0x1];
u8 reserved_at_1b2[0x1];
u8 disable_link_up[0x1];
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH net-next V2 6/6] net/mlx5: Add handling for port module event
2016-09-06 16:04 ` [PATCH net-next V2 6/6] net/mlx5: Add handling for port module event Saeed Mahameed
@ 2016-09-06 16:15 ` Joe Perches
2016-09-07 14:50 ` Saeed Mahameed
0 siblings, 1 reply; 15+ messages in thread
From: Joe Perches @ 2016-09-06 16:15 UTC (permalink / raw)
To: Saeed Mahameed, David S. Miller; +Cc: netdev, Huy Nguyen, Or Gerlitz
On Tue, 2016-09-06 at 19:04 +0300, Saeed Mahameed wrote:
> From: Huy Nguyen <huyn@mellanox.com>
[]
> +void mlx5_port_module_event(struct mlx5_core_dev *dev, struct mlx5_eqe *eqe)
> +{
> > + struct mlx5_eqe_port_module *module_event_eqe;
> > + u8 module_status;
> > + u8 module_num;
> > + u8 error_type;
> +
> > + module_event_eqe = &eqe->data.port_module;
> > + module_num = module_event_eqe->module;
> > + module_status = module_event_eqe->module_status &
> > + PORT_MODULE_EVENT_MODULE_STATUS_MASK;
> > + error_type = module_event_eqe->error_type &
> > + PORT_MODULE_EVENT_ERROR_TYPE_MASK;
> +
> > + switch (module_status) {
> > + case MLX5_MODULE_STATUS_PLUGGED:
> + mlx5_core_info(dev, "Module %u, status: plugged", module_num);
Missing format '\n' line terminations
> + break;
> +
> > + case MLX5_MODULE_STATUS_UNPLUGGED:
> > + mlx5_core_info(dev, "Module %u, status: unplugged", module_num);
> > + break;
> +
> > + case MLX5_MODULE_STATUS_ERROR:
> > + mlx5_core_info(dev, "Module %u, status: error, %s", module_num,
> > + mlx5_port_event_error_type_to_string(error_type));
> > + break;
> +
> > + default:
> > + mlx5_core_info(dev, "Module %u, unknown module status %x",
> > + module_num, module_status);
> + }
Should any of these be ratelimited?
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH net-next V2 6/6] net/mlx5: Add handling for port module event
2016-09-06 16:15 ` Joe Perches
@ 2016-09-07 14:50 ` Saeed Mahameed
0 siblings, 0 replies; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-07 14:50 UTC (permalink / raw)
To: Joe Perches
Cc: Saeed Mahameed, David S. Miller, Linux Netdev List, Huy Nguyen,
Or Gerlitz
On Tue, Sep 6, 2016 at 7:15 PM, Joe Perches <joe@perches.com> wrote:
> On Tue, 2016-09-06 at 19:04 +0300, Saeed Mahameed wrote:
>> From: Huy Nguyen <huyn@mellanox.com>
>
> []
>
>> +void mlx5_port_module_event(struct mlx5_core_dev *dev, struct mlx5_eqe *eqe)
>> +{
>> > + struct mlx5_eqe_port_module *module_event_eqe;
>> > + u8 module_status;
>> > + u8 module_num;
>> > + u8 error_type;
>> +
>> > + module_event_eqe = &eqe->data.port_module;
>> > + module_num = module_event_eqe->module;
>> > + module_status = module_event_eqe->module_status &
>> > + PORT_MODULE_EVENT_MODULE_STATUS_MASK;
>> > + error_type = module_event_eqe->error_type &
>> > + PORT_MODULE_EVENT_ERROR_TYPE_MASK;
>> +
>> > + switch (module_status) {
>> > + case MLX5_MODULE_STATUS_PLUGGED:
>> + mlx5_core_info(dev, "Module %u, status: plugged", module_num);
>
>
> Missing format '\n' line terminations
Right, will fix this.
Thanks
>
>> + break;
>> +
>> > + case MLX5_MODULE_STATUS_UNPLUGGED:
>> > + mlx5_core_info(dev, "Module %u, status: unplugged", module_num);
>> > + break;
>> +
>> > + case MLX5_MODULE_STATUS_ERROR:
>> > + mlx5_core_info(dev, "Module %u, status: error, %s", module_num,
>> > + mlx5_port_event_error_type_to_string(error_type));
>> > + break;
>> +
>> > + default:
>> > + mlx5_core_info(dev, "Module %u, unknown module status %x",
>> > + module_num, module_status);
>> + }
>
> Should any of these be ratelimited?
>
Huy is checking with the HW/FW guys. they shouldn't flood the driver
by design, but to be
in the safe side, we will double check.
Thanks,
Saeed.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support
2016-09-06 16:04 [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
` (5 preceding siblings ...)
2016-09-06 16:04 ` [PATCH net-next V2 6/6] net/mlx5: Add handling for port module event Saeed Mahameed
@ 2016-09-07 20:16 ` Saeed Mahameed
2016-09-07 20:27 ` David Miller
6 siblings, 1 reply; 15+ messages in thread
From: Saeed Mahameed @ 2016-09-07 20:16 UTC (permalink / raw)
To: Saeed Mahameed; +Cc: David S. Miller, Linux Netdev List, Huy Nguyen, Or Gerlitz
On Tue, Sep 6, 2016 at 7:04 PM, Saeed Mahameed <saeedm@mellanox.com> wrote:
> Hi Dave,
>
Hi Dave, Sorry to bother, but i would like to drop this series for now
Huy is working to define and come up with a better mechanism to
enable/disable the new DCBX hybrid mode he is adding.
Thanks for understanding,
Saeed.
> This series from Huy provides mlx5 DCBX updates to support DCBX CEE
> API and DCBX firmware/host modes support.
>
> 1st patch ensures the dcbnl_rtnl_ops is published only when the qos capability bits is on.
>
> 2nd patch adds the support for CEE interfaces into mlx5 dcbnl_rtnl_ops.
>
> 3rd patch refactors ETS query to read ETS configuration directly from firmware rather
> than having a software shadow to it. The existing IEEE interfaces stays the same.
>
> 4th patch adds the support for MLX5_REG_DCBX_PARAM and MLX5_REG_DCBX_APP firmware
> commands to manipulate mlx5 DCBX mode.
>
> 5th patch adds the driver support for the new DCBX firmware.
> This ensures the backward compatibility versus the old and new firmware.
> With the new DCBX firmware, qos settings can be controlled by either firmware
> or software depending on the DCBX mode.
>
> 6th patch adds support for module events log.
>
> Changes since V1:
> 1. Add qos capability check
> 2. In port module events eqe structure, change rsvd_n to reserved_at_n to be consistent with mlx5_ifc.h
> 3. Improve commit messages
> 4. Drop DCBX private flags patch
> 5. Add patch to check for qos capability bit check before exposing dcb interfaces
> 6. Replace memset with static array initialization
>
> Thanks,
> Saeed.
>
> Huy Nguyen (6):
> net/mlx5e: Add qos capability check
> net/mlx5e: Support DCBX CEE API
> net/mlx5e: Read ETS settings directly from firmware
> net/mlx5: Add DCBX firmware commands support
> net/mlx5e: ConnectX-4 firmware support for DCBX
> net/mlx5: Add handling for port module event
>
> drivers/net/ethernet/mellanox/mlx5/core/en.h | 36 +-
> drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 483 ++++++++++++++++++++-
> drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 27 +-
> drivers/net/ethernet/mellanox/mlx5/core/eq.c | 12 +
> .../net/ethernet/mellanox/mlx5/core/mlx5_core.h | 1 +
> drivers/net/ethernet/mellanox/mlx5/core/port.c | 148 +++++++
> include/linux/mlx5/device.h | 11 +
> include/linux/mlx5/driver.h | 7 +
> include/linux/mlx5/mlx5_ifc.h | 3 +-
> include/linux/mlx5/port.h | 6 +
> 10 files changed, 698 insertions(+), 36 deletions(-)
>
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support
2016-09-07 20:16 ` [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support Saeed Mahameed
@ 2016-09-07 20:27 ` David Miller
2016-09-07 20:51 ` Or Gerlitz
0 siblings, 1 reply; 15+ messages in thread
From: David Miller @ 2016-09-07 20:27 UTC (permalink / raw)
To: saeedm; +Cc: saeedm, netdev, huyn, ogerlitz
From: Saeed Mahameed <saeedm@dev.mellanox.co.il>
Date: Wed, 7 Sep 2016 23:16:13 +0300
> Hi Dave, Sorry to bother, but i would like to drop this series for now
> Huy is working to define and come up with a better mechanism to
> enable/disable the new DCBX hybrid mode he is adding.
I can't "just drop" any change that's in my tree already.
It is part of the permanent GIT record as I never rebase my trees for
any reason whatsoever.
So the best you can do is send me a revert patch.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support
2016-09-07 20:27 ` David Miller
@ 2016-09-07 20:51 ` Or Gerlitz
2016-09-07 22:36 ` David Miller
0 siblings, 1 reply; 15+ messages in thread
From: Or Gerlitz @ 2016-09-07 20:51 UTC (permalink / raw)
To: David Miller
Cc: Saeed Mahameed, Saeed Mahameed, Linux Netdev List, Huy Nguyen,
Or Gerlitz
On Wed, Sep 7, 2016 at 11:27 PM, David Miller <davem@davemloft.net> wrote:
> From: Saeed Mahameed <saeedm@dev.mellanox.co.il>
> Date: Wed, 7 Sep 2016 23:16:13 +0300
>
>> Hi Dave, Sorry to bother, but i would like to drop this series for now
>> Huy is working to define and come up with a better mechanism to
>> enable/disable the new DCBX hybrid mode he is adding.
>
> I can't "just drop" any change that's in my tree already.
Dave, I don't see it @ your kernel.org clone but it's not in
patchworks either, so I guess you picked that into your other clone.
If indeed you took it (and I guess this is the case), please note that
was done in spite of a pending reviewer comment
(by me) on the actual necessity of patch #3. If its not possible to
revert them on the non kernel.org clone before you push it to
kernel.org, I guess we need to send you a revert
[1] http://marc.info/?l=linux-netdev&m=147317917622462&w=2
> It is part of the permanent GIT record as I never rebase my trees for
> any reason whatsoever.
> So the best you can do is send me a revert patch.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support
2016-09-07 20:51 ` Or Gerlitz
@ 2016-09-07 22:36 ` David Miller
2016-09-08 6:52 ` Or Gerlitz
0 siblings, 1 reply; 15+ messages in thread
From: David Miller @ 2016-09-07 22:36 UTC (permalink / raw)
To: gerlitz.or; +Cc: saeedm, saeedm, netdev, huyn, ogerlitz
From: Or Gerlitz <gerlitz.or@gmail.com>
Date: Wed, 7 Sep 2016 23:51:56 +0300
> On Wed, Sep 7, 2016 at 11:27 PM, David Miller <davem@davemloft.net> wrote:
>> From: Saeed Mahameed <saeedm@dev.mellanox.co.il>
>> Date: Wed, 7 Sep 2016 23:16:13 +0300
>>
>>> Hi Dave, Sorry to bother, but i would like to drop this series for now
>>> Huy is working to define and come up with a better mechanism to
>>> enable/disable the new DCBX hybrid mode he is adding.
>>
>> I can't "just drop" any change that's in my tree already.
>
> Dave, I don't see it @ your kernel.org clone but it's not in
> patchworks either, so I guess you picked that into your other clone.
Aha, I marked it "changes requested" in patchwork and did not apply
it.
My bad.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH net-next V2 0/6] Mellanox 100G mlx5 DCBX CEE and firmware support
2016-09-07 22:36 ` David Miller
@ 2016-09-08 6:52 ` Or Gerlitz
0 siblings, 0 replies; 15+ messages in thread
From: Or Gerlitz @ 2016-09-08 6:52 UTC (permalink / raw)
To: David Miller
Cc: Saeed Mahameed, Saeed Mahameed, Linux Netdev List, Huy Nguyen,
Or Gerlitz
On Thu, Sep 8, 2016 at 1:36 AM, David Miller <davem@davemloft.net> wrote:
> From: Or Gerlitz <gerlitz.or@gmail.com>
> Date: Wed, 7 Sep 2016 23:51:56 +0300
>
>> On Wed, Sep 7, 2016 at 11:27 PM, David Miller <davem@davemloft.net> wrote:
>>> From: Saeed Mahameed <saeedm@dev.mellanox.co.il>
>>> Date: Wed, 7 Sep 2016 23:16:13 +0300
>>>
>>>> Hi Dave, Sorry to bother, but i would like to drop this series for now
>>>> Huy is working to define and come up with a better mechanism to
>>>> enable/disable the new DCBX hybrid mode he is adding.
>>>
>>> I can't "just drop" any change that's in my tree already.
>>
>> Dave, I don't see it @ your kernel.org clone but it's not in
>> patchworks either, so I guess you picked that into your other clone.
>
> Aha, I marked it "changes requested" in patchwork and did not apply it.
> My bad.
Don't worry, happens...
Thank you
Or.
^ permalink raw reply [flat|nested] 15+ messages in thread