* [U-Boot] CACHE: Misaligned operation for rpi_3_32b_defconfig
@ 2019-06-27 22:15 Elliot Cooper
2019-06-28 21:04 ` [U-Boot] Fwd: " Elliot Cooper
0 siblings, 1 reply; 2+ messages in thread
From: Elliot Cooper @ 2019-06-27 22:15 UTC (permalink / raw)
To: u-boot
Hi Guys,
I have just built a u-boot.bin for rpi_3_32b_defconfig using all the
defaults. I then used this on the new Raspbian Buster image that was
released a few days ago i.e. 2019-06-20-raspbian-buster-lite.zip.
This same u-boot.bin works fine on the old Raspbian Stretch version (
2019-04-08-raspbian-stretch.zip).
Booting the RPI with Raspbian Buser gives the following error:
U-Boot 2019.07-rc4-00287-g5eea874b5e-dirty (Jun 27 2019 - 22:00:42 +0000)
DRAM: 948 MiB
RPI 3 Model B (0xa02082)
MMC: mmc at 7e202000: 0, sdhci at 7e300000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default
environment
mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
Any help would be greatly appreciated!
Thanks for your time.
Elliot
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] Fwd: CACHE: Misaligned operation for rpi_3_32b_defconfig
2019-06-27 22:15 [U-Boot] CACHE: Misaligned operation for rpi_3_32b_defconfig Elliot Cooper
@ 2019-06-28 21:04 ` Elliot Cooper
0 siblings, 0 replies; 2+ messages in thread
From: Elliot Cooper @ 2019-06-28 21:04 UTC (permalink / raw)
To: u-boot
Hi Guys,
I have just built a u-boot.bin for rpi_3_32b_defconfig using all the
defaults. I then used this on the new Raspbian Buster image that was
released a few days ago i.e. 2019-06-20-raspbian-buster-lite.zip.
This same u-boot.bin works fine on the old Raspbian Stretch version (
2019-04-08-raspbian-stretch.zip).
Booting the RPI with Raspbian Buser gives the following error:
U-Boot 2019.07-rc4-00287-g5eea874b5e-dirty (Jun 27 2019 - 22:00:42 +0000)
DRAM: 948 MiB
RPI 3 Model B (0xa02082)
MMC: mmc at 7e202000: 0, sdhci at 7e300000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default
environment
mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
Any help would be greatly appreciated!
Thanks for your time.
Elliot
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-28 21:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-27 22:15 [U-Boot] CACHE: Misaligned operation for rpi_3_32b_defconfig Elliot Cooper
2019-06-28 21:04 ` [U-Boot] Fwd: " Elliot Cooper
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.