* [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
@ 2021-06-22 1:49 ` kernel test robot
0 siblings, 0 replies; 13+ messages in thread
From: kernel test robot @ 2021-06-22 1:49 UTC (permalink / raw)
To: Feng Tang; +Cc: kbuild-all, Linux Memory Management List, Masahiro Yamada
[-- Attachment #1: Type: text/plain, Size: 1922 bytes --]
tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
config: csky-randconfig-c024-20210622 (attached as .config)
compiler: csky-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git fetch --no-tags linux-next master
git checkout cf536e185869d4815d506e777bcca6edd9966a6e
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
{standard input}: Assembler messages:
>> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
{standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
{standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for LOCKDEP
Depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT && (FRAME_POINTER || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86)
Selected by
- PROVE_LOCKING && DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
- DEBUG_LOCK_ALLOC && DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 22613 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
@ 2021-06-22 1:49 ` kernel test robot
0 siblings, 0 replies; 13+ messages in thread
From: kernel test robot @ 2021-06-22 1:49 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 1959 bytes --]
tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
config: csky-randconfig-c024-20210622 (attached as .config)
compiler: csky-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git fetch --no-tags linux-next master
git checkout cf536e185869d4815d506e777bcca6edd9966a6e
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
{standard input}: Assembler messages:
>> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
{standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
{standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for LOCKDEP
Depends on DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT && (FRAME_POINTER || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86)
Selected by
- PROVE_LOCKING && DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
- DEBUG_LOCK_ALLOC && DEBUG_KERNEL && LOCK_DEBUGGING_SUPPORT
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 22613 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
2021-06-22 1:49 ` kernel test robot
@ 2021-06-22 9:48 ` Feng Tang
-1 siblings, 0 replies; 13+ messages in thread
From: Feng Tang @ 2021-06-22 9:48 UTC (permalink / raw)
To: kernel test robot
Cc: kbuild-all, Linux Memory Management List, Masahiro Yamada
On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> config: csky-randconfig-c024-20210622 (attached as .config)
> compiler: csky-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> git fetch --no-tags linux-next master
> git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> {standard input}: Assembler messages:
> >> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
Thanks for the report.
I just reproduced the issue locally, with similar log:
CC drivers/target/target_core_sbc.o
{standard input}: Assembler messages:
{standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
{standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
{standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
m
And when I changed the function align option from 64 to 32, the
compilation did pass, so this looks to be related with the alignment
option.
I'm very familiar with compiler, and will try to check more.
I know it works on x86_64, but don't know how about other
architectures, and if 'csky' is the only not working one, one
workaround I can think of is to add kconfig dependency for !csky
Thanks,
Feng
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
@ 2021-06-22 9:48 ` Feng Tang
0 siblings, 0 replies; 13+ messages in thread
From: Feng Tang @ 2021-06-22 9:48 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2502 bytes --]
On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> config: csky-randconfig-c024-20210622 (attached as .config)
> compiler: csky-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> git fetch --no-tags linux-next master
> git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> {standard input}: Assembler messages:
> >> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
Thanks for the report.
I just reproduced the issue locally, with similar log:
CC drivers/target/target_core_sbc.o
{standard input}: Assembler messages:
{standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
{standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
{standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
m
And when I changed the function align option from 64 to 32, the
compilation did pass, so this looks to be related with the alignment
option.
I'm very familiar with compiler, and will try to check more.
I know it works on x86_64, but don't know how about other
architectures, and if 'csky' is the only not working one, one
workaround I can think of is to add kconfig dependency for !csky
Thanks,
Feng
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
2021-06-22 9:48 ` Feng Tang
@ 2021-06-22 9:56 ` Feng Tang
-1 siblings, 0 replies; 13+ messages in thread
From: Feng Tang @ 2021-06-22 9:56 UTC (permalink / raw)
To: lkp; +Cc: kbuild-all, Linux Memory Management List, Masahiro Yamada
On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > config: csky-randconfig-c024-20210622 (attached as .config)
> > compiler: csky-linux-gcc (GCC) 9.3.0
> > reproduce (this is a W=1 build):
> > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > chmod +x ~/bin/make.cross
> > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > git fetch --no-tags linux-next master
> > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > # save the attached .config to linux build tree
> > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
> >
> > If you fix the issue, kindly add following tag as appropriate
> > Reported-by: kernel test robot <lkp@intel.com>
> >
> > All errors (new ones prefixed by >>):
> >
> > {standard input}: Assembler messages:
> > >> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> > {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> > {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
>
> Thanks for the report.
>
> I just reproduced the issue locally, with similar log:
>
> CC drivers/target/target_core_sbc.o
> {standard input}: Assembler messages:
> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> m
>
> And when I changed the function align option from 64 to 32, the
> compilation did pass, so this looks to be related with the alignment
> option.
>
> I'm very familiar with compiler, and will try to check more.
Sorry, typo, should be "not very familiar" :P
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
@ 2021-06-22 9:56 ` Feng Tang
0 siblings, 0 replies; 13+ messages in thread
From: Feng Tang @ 2021-06-22 9:56 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2485 bytes --]
On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > config: csky-randconfig-c024-20210622 (attached as .config)
> > compiler: csky-linux-gcc (GCC) 9.3.0
> > reproduce (this is a W=1 build):
> > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > chmod +x ~/bin/make.cross
> > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > git fetch --no-tags linux-next master
> > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > # save the attached .config to linux build tree
> > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
> >
> > If you fix the issue, kindly add following tag as appropriate
> > Reported-by: kernel test robot <lkp@intel.com>
> >
> > All errors (new ones prefixed by >>):
> >
> > {standard input}: Assembler messages:
> > >> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> > {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> > {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
>
> Thanks for the report.
>
> I just reproduced the issue locally, with similar log:
>
> CC drivers/target/target_core_sbc.o
> {standard input}: Assembler messages:
> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> m
>
> And when I changed the function align option from 64 to 32, the
> compilation did pass, so this looks to be related with the alignment
> option.
>
> I'm very familiar with compiler, and will try to check more.
Sorry, typo, should be "not very familiar" :P
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
2021-06-22 9:48 ` Feng Tang
@ 2021-06-23 8:58 ` Feng Tang
-1 siblings, 0 replies; 13+ messages in thread
From: Feng Tang @ 2021-06-23 8:58 UTC (permalink / raw)
To: lkp, Masahiro Yamada
Cc: kbuild-all, linux-csky, linux-kbuild, Andrew Morton,
Thomas Gleixner, Andi Kleen
Add linux-csky list and originally cced people and replace the linux-mm
with linux-kbuild list, which match the discussion better and avoid
email noise for mm people.
On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > config: csky-randconfig-c024-20210622 (attached as .config)
> > compiler: csky-linux-gcc (GCC) 9.3.0
> > reproduce (this is a W=1 build):
> > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > chmod +x ~/bin/make.cross
> > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > git fetch --no-tags linux-next master
> > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > # save the attached .config to linux build tree
> > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
> Thanks for the report.
>
> I just reproduced the issue locally, with similar log:
>
> CC drivers/target/target_core_sbc.o
> {standard input}: Assembler messages:
> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> m
>
> And when I changed the function align option from 64 to 32, the
> compilation did pass, so this looks to be related with the alignment
> option.
>
> I'm not very familiar with compiler, and will try to check more.
I did some check and found the error info comes from the assembler
for 'csky' in binutils' gas/config/tc-csky.c, and I could hardly
dive deeper into the code as limited by my knowledge.
> I know it works on x86_64, but don't know how about other
> architectures, and if 'csky' is the only not working one, one
> workaround I can think of is to add kconfig dependency for !csky
I reused the 0day's reproduce process, and tried on arm64, powerpc64,
and arc, the kernel compilation all succeeded. So maybe we can
add some dependency for this debug option like:
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 3cf48998a374..eb035b31657f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -415,7 +415,8 @@ config SECTION_MISMATCH_WARN_ONLY
If unsure, say Y.
config DEBUG_FORCE_FUNCTION_ALIGN_64B
- bool "Force all function address 64B aligned" if EXPERT
+ bool "Force all function address 64B aligned"
+ depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
help
There are cases that a commit from one domain changes the function
address alignment of other domains, and cause magic performance
Any comments? thanks!
- Feng
> Thanks,
> Feng
>
>
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
@ 2021-06-23 8:58 ` Feng Tang
0 siblings, 0 replies; 13+ messages in thread
From: Feng Tang @ 2021-06-23 8:58 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 3349 bytes --]
Add linux-csky list and originally cced people and replace the linux-mm
with linux-kbuild list, which match the discussion better and avoid
email noise for mm people.
On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > config: csky-randconfig-c024-20210622 (attached as .config)
> > compiler: csky-linux-gcc (GCC) 9.3.0
> > reproduce (this is a W=1 build):
> > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > chmod +x ~/bin/make.cross
> > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > git fetch --no-tags linux-next master
> > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > # save the attached .config to linux build tree
> > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
> Thanks for the report.
>
> I just reproduced the issue locally, with similar log:
>
> CC drivers/target/target_core_sbc.o
> {standard input}: Assembler messages:
> {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> m
>
> And when I changed the function align option from 64 to 32, the
> compilation did pass, so this looks to be related with the alignment
> option.
>
> I'm not very familiar with compiler, and will try to check more.
I did some check and found the error info comes from the assembler
for 'csky' in binutils' gas/config/tc-csky.c, and I could hardly
dive deeper into the code as limited by my knowledge.
> I know it works on x86_64, but don't know how about other
> architectures, and if 'csky' is the only not working one, one
> workaround I can think of is to add kconfig dependency for !csky
I reused the 0day's reproduce process, and tried on arm64, powerpc64,
and arc, the kernel compilation all succeeded. So maybe we can
add some dependency for this debug option like:
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 3cf48998a374..eb035b31657f 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -415,7 +415,8 @@ config SECTION_MISMATCH_WARN_ONLY
If unsure, say Y.
config DEBUG_FORCE_FUNCTION_ALIGN_64B
- bool "Force all function address 64B aligned" if EXPERT
+ bool "Force all function address 64B aligned"
+ depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
help
There are cases that a commit from one domain changes the function
address alignment of other domains, and cause magic performance
Any comments? thanks!
- Feng
> Thanks,
> Feng
>
>
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
2021-06-23 8:58 ` Feng Tang
@ 2021-06-24 8:06 ` Guo Ren
-1 siblings, 0 replies; 13+ messages in thread
From: Guo Ren @ 2021-06-24 8:06 UTC (permalink / raw)
To: Feng Tang
Cc: lkp, Masahiro Yamada, kbuild-all, linux-csky, linux-kbuild,
Andrew Morton, Thomas Gleixner, Andi Kleen,
瞿仙淼
On Wed, Jun 23, 2021 at 4:59 PM Feng Tang <feng.tang@intel.com> wrote:
>
> Add linux-csky list and originally cced people and replace the linux-mm
> with linux-kbuild list, which match the discussion better and avoid
> email noise for mm people.
>
> On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> > On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > > config: csky-randconfig-c024-20210622 (attached as .config)
> > > compiler: csky-linux-gcc (GCC) 9.3.0
> > > reproduce (this is a W=1 build):
> > > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > chmod +x ~/bin/make.cross
> > > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > > git fetch --no-tags linux-next master
> > > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > > # save the attached .config to linux build tree
> > > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
>
> > Thanks for the report.
> >
> > I just reproduced the issue locally, with similar log:
> >
> > CC drivers/target/target_core_sbc.o
> > {standard input}: Assembler messages:
> > {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> > {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> > {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> > make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> > m
> >
> > And when I changed the function align option from 64 to 32, the
> > compilation did pass, so this looks to be related with the alignment
> > option.
> >
> > I'm not very familiar with compiler, and will try to check more.
>
> I did some check and found the error info comes from the assembler
> for 'csky' in binutils' gas/config/tc-csky.c, and I could hardly
> dive deeper into the code as limited by my knowledge.
>
>
> > I know it works on x86_64, but don't know how about other
> > architectures, and if 'csky' is the only not working one, one
> > workaround I can think of is to add kconfig dependency for !csky
>
> I reused the 0day's reproduce process, and tried on arm64, powerpc64,
> and arc, the kernel compilation all succeeded. So maybe we can
> add some dependency for this debug option like:
>
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 3cf48998a374..eb035b31657f 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -415,7 +415,8 @@ config SECTION_MISMATCH_WARN_ONLY
> If unsure, say Y.
>
> config DEBUG_FORCE_FUNCTION_ALIGN_64B
> - bool "Force all function address 64B aligned" if EXPERT
> + bool "Force all function address 64B aligned"
> + depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
> help
> There are cases that a commit from one domain changes the function
> address alignment of other domains, and cause magic performance
>
> Any comments? thanks!
Have tried riscv32? I don't think csky is the only problem.
Assembler just follows gcc backend result and also depends on ISA
design. Our condition branch seems not far enough.
Cc: xianmiao_qu@c-sky.com
>
> - Feng
>
> > Thanks,
> > Feng
> >
> >
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
@ 2021-06-24 8:06 ` Guo Ren
0 siblings, 0 replies; 13+ messages in thread
From: Guo Ren @ 2021-06-24 8:06 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 3888 bytes --]
On Wed, Jun 23, 2021 at 4:59 PM Feng Tang <feng.tang@intel.com> wrote:
>
> Add linux-csky list and originally cced people and replace the linux-mm
> with linux-kbuild list, which match the discussion better and avoid
> email noise for mm people.
>
> On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> > On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > > config: csky-randconfig-c024-20210622 (attached as .config)
> > > compiler: csky-linux-gcc (GCC) 9.3.0
> > > reproduce (this is a W=1 build):
> > > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > chmod +x ~/bin/make.cross
> > > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > > git fetch --no-tags linux-next master
> > > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > > # save the attached .config to linux build tree
> > > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
>
> > Thanks for the report.
> >
> > I just reproduced the issue locally, with similar log:
> >
> > CC drivers/target/target_core_sbc.o
> > {standard input}: Assembler messages:
> > {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> > {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> > {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> > make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> > m
> >
> > And when I changed the function align option from 64 to 32, the
> > compilation did pass, so this looks to be related with the alignment
> > option.
> >
> > I'm not very familiar with compiler, and will try to check more.
>
> I did some check and found the error info comes from the assembler
> for 'csky' in binutils' gas/config/tc-csky.c, and I could hardly
> dive deeper into the code as limited by my knowledge.
>
>
> > I know it works on x86_64, but don't know how about other
> > architectures, and if 'csky' is the only not working one, one
> > workaround I can think of is to add kconfig dependency for !csky
>
> I reused the 0day's reproduce process, and tried on arm64, powerpc64,
> and arc, the kernel compilation all succeeded. So maybe we can
> add some dependency for this debug option like:
>
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 3cf48998a374..eb035b31657f 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -415,7 +415,8 @@ config SECTION_MISMATCH_WARN_ONLY
> If unsure, say Y.
>
> config DEBUG_FORCE_FUNCTION_ALIGN_64B
> - bool "Force all function address 64B aligned" if EXPERT
> + bool "Force all function address 64B aligned"
> + depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
> help
> There are cases that a commit from one domain changes the function
> address alignment of other domains, and cause magic performance
>
> Any comments? thanks!
Have tried riscv32? I don't think csky is the only problem.
Assembler just follows gcc backend result and also depends on ISA
design. Our condition branch seems not far enough.
Cc: xianmiao_qu(a)c-sky.com
>
> - Feng
>
> > Thanks,
> > Feng
> >
> >
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
2021-06-24 8:06 ` Guo Ren
(?)
@ 2021-06-24 8:50 ` Feng Tang
2021-06-24 9:37 ` Guo Ren
-1 siblings, 1 reply; 13+ messages in thread
From: Feng Tang @ 2021-06-24 8:50 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 4455 bytes --]
On Thu, Jun 24, 2021 at 04:06:51PM +0800, Guo Ren wrote:
> On Wed, Jun 23, 2021 at 4:59 PM Feng Tang <feng.tang@intel.com> wrote:
> >
> > Add linux-csky list and originally cced people and replace the linux-mm
> > with linux-kbuild list, which match the discussion better and avoid
> > email noise for mm people.
> >
> > On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> > > On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > > > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > > > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > > > config: csky-randconfig-c024-20210622 (attached as .config)
> > > > compiler: csky-linux-gcc (GCC) 9.3.0
> > > > reproduce (this is a W=1 build):
> > > > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > > chmod +x ~/bin/make.cross
> > > > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > > > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > > > git fetch --no-tags linux-next master
> > > > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > > > # save the attached .config to linux build tree
> > > > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
> >
> > > Thanks for the report.
> > >
> > > I just reproduced the issue locally, with similar log:
> > >
> > > CC drivers/target/target_core_sbc.o
> > > {standard input}: Assembler messages:
> > > {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> > > {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> > > {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> > > make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> > > m
> > >
> > > And when I changed the function align option from 64 to 32, the
> > > compilation did pass, so this looks to be related with the alignment
> > > option.
> > >
> > > I'm not very familiar with compiler, and will try to check more.
> >
> > I did some check and found the error info comes from the assembler
> > for 'csky' in binutils' gas/config/tc-csky.c, and I could hardly
> > dive deeper into the code as limited by my knowledge.
> >
> >
> > > I know it works on x86_64, but don't know how about other
> > > architectures, and if 'csky' is the only not working one, one
> > > workaround I can think of is to add kconfig dependency for !csky
> >
> > I reused the 0day's reproduce process, and tried on arm64, powerpc64,
> > and arc, the kernel compilation all succeeded. So maybe we can
> > add some dependency for this debug option like:
> >
> > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > index 3cf48998a374..eb035b31657f 100644
> > --- a/lib/Kconfig.debug
> > +++ b/lib/Kconfig.debug
> > @@ -415,7 +415,8 @@ config SECTION_MISMATCH_WARN_ONLY
> > If unsure, say Y.
> >
> > config DEBUG_FORCE_FUNCTION_ALIGN_64B
> > - bool "Force all function address 64B aligned" if EXPERT
> > + bool "Force all function address 64B aligned"
> > + depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
> > help
> > There are cases that a commit from one domain changes the function
> > address alignment of other domains, and cause magic performance
> >
> > Any comments? thanks!
> Have tried riscv32? I don't think csky is the only problem.
>
> Assembler just follows gcc backend result and also depends on ISA
> design. Our condition branch seems not far enough.
Thanks for the info.
I just used 0day's cross compile env to compile 'riscv32', and it
succeeded with 64B align option. (the kernel config is attached)
Anyway, this debug option is for debug only, and nice to have. If
it doesn't work on one architecture, I dont' think it means a severe
problem.
Thanks,
Feng
> Cc: xianmiao_qu(a)c-sky.com
>
> >
> > - Feng
> >
> > > Thanks,
> > > Feng
> > >
> > >
>
>
>
> --
> Best Regards
> Guo Ren
>
> ML: https://lore.kernel.org/linux-csky/
[-- Attachment #2: riscv32.config --]
[-- Type: text/plain, Size: 97716 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/riscv 5.13.0-rc3 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="riscv32-linux-gcc (GCC) 9.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23400
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23400
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=2
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_HAVE_FUTEX_CMPXCHG=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_IO_URING=y
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_USERMODE_DRIVER=y
CONFIG_BPF_PRELOAD=y
# CONFIG_USERFAULTFD is not set
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_32BIT=y
CONFIG_RISCV=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_RISCV_SBI=y
CONFIG_MMU=y
CONFIG_VA_BITS=32
CONFIG_PA_BITS=34
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_LOCKDEP_SUPPORT=y
#
# SoC selection
#
# CONFIG_SOC_MICROCHIP_POLARFIRE is not set
# CONFIG_SOC_SIFIVE is not set
# CONFIG_SOC_VIRT is not set
# end of SoC selection
#
# CPU errata selection
#
CONFIG_RISCV_ERRATA_ALTERNATIVE=y
# CONFIG_ERRATA_SIFIVE is not set
# end of CPU errata selection
#
# Platform type
#
CONFIG_ARCH_RV32I=y
# CONFIG_ARCH_RV64I is not set
# CONFIG_CMODEL_MEDLOW is not set
CONFIG_CMODEL_MEDANY=y
CONFIG_MAXPHYSMEM_1GB=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
CONFIG_TUNE_GENERIC=y
# CONFIG_NUMA is not set
CONFIG_RISCV_ISA_C=y
#
# supported PMU type
#
CONFIG_RISCV_BASE_PMU=y
# end of supported PMU type
CONFIG_FPU=y
# end of Platform type
#
# Kernel features
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_RISCV_SBI_V01=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# end of Kernel features
#
# Boot options
#
CONFIG_CMDLINE=""
# CONFIG_EFI is not set
# CONFIG_PHYS_RAM_BASE_FIXED is not set
# CONFIG_XIP_KERNEL is not set
# end of Boot options
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# end of Power management options
#
# Firmware Drivers
#
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
#
# General architecture-dependent options
#
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_CGROUP_IOCOST=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# CONFIG_BFQ_GROUP_IOSCHED is not set
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=y
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
# CONFIG_NET_SCH_ETF is not set
CONFIG_NET_SCH_TAPRIO=y
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
# CONFIG_NET_SCH_HHF is not set
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=y
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
CONFIG_NET_ACT_IFE=y
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_ACT_GATE=y
CONFIG_NET_IFE_SKBMARK=y
CONFIG_NET_IFE_SKBPRIO=y
CONFIG_NET_IFE_SKBTCINDEX=y
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_NET_NSH is not set
CONFIG_HSR=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
CONFIG_QRTR_TUN=y
# CONFIG_QRTR_MHI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
# CONFIG_CAIF_USB is not set
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_SIM is not set
# CONFIG_NFC_VIRTUAL_NCI is not set
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_PN532_UART is not set
# CONFIG_NFC_ST_NCI_I2C is not set
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
# CONFIG_NFC_S3FWRN5_I2C is not set
CONFIG_NFC_S3FWRN82_UART=y
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_SIMPLE_PM_BUS is not set
CONFIG_MHI_BUS=y
# CONFIG_MHI_BUS_DEBUG is not set
# CONFIG_MHI_BUS_PCI_GENERIC is not set
# end of Bus devices
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
# CONFIG_GNSS is not set
CONFIG_MTD=y
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
# CONFIG_NFTL is not set
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
# CONFIG_MTD_PCI is not set
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_RAW_NAND is not set
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_MTD_HYPERBUS=y
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=y
CONFIG_C2PORT=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=y
# CONFIG_SCSI_UFSHCD_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set
CONFIG_SCSI_UFS_BSG=y
# CONFIG_SCSI_UFS_CRYPTO is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_FORCE is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_CEVA is not set
CONFIG_AHCI_QORIQ=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_EBS=y
CONFIG_DM_ERA=y
CONFIG_DM_CLONE=y
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=y
CONFIG_DM_DUST=y
# CONFIG_DM_INIT is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
# CONFIG_DM_LOG_WRITES is not set
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not set
# CONFIG_TCM_USER2 is not set
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_NETDEVICES is not set
CONFIG_NVM=y
CONFIG_NVM_PBLK=y
# CONFIG_NVM_PBLK_DEBUG is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1050 is not set
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F3A is not set
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# end of PCMCIA character devices
# CONFIG_DEVMEM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_CR50=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_ATMEL=y
CONFIG_TCG_VTPM_PROXY=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_XILLYBUS is not set
# end of Character devices
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=y
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_FSI is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=y
# CONFIG_CDNS_I3C_MASTER is not set
CONFIG_DW_I3C_MASTER=y
CONFIG_SVC_I3C_MASTER=y
# CONFIG_MIPI_I3C_HCI is not set
# CONFIG_SPI is not set
CONFIG_SPMI=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_PARPORT is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_IDT82P33=y
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_OCP is not set
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AS3722 is not set
CONFIG_PINCTRL_DA9062=y
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_PINCTRL_LOCHNAGAR=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SIOX is not set
# CONFIG_GPIO_SYSCON is not set
CONFIG_GPIO_WCD934X=y
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCA9570=y
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_BD70528=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL6040=y
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
# end of Virtual GPIO drivers
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=y
# CONFIG_W1_SLAVE_DS250X is not set
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
# CONFIG_POWER_RESET_ATC260X is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
CONFIG_POWER_RESET_LTC2952=y
# CONFIG_POWER_RESET_REGULATOR is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_REBOOT_MODE=y
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_88PM860X is not set
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=y
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_BQ25980=y
# CONFIG_CHARGER_BQ256XX is not set
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_UCS1002=y
# CONFIG_CHARGER_BD70528 is not set
CONFIG_CHARGER_BD99954=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_MMIO=y
CONFIG_MAX77620_THERMAL=y
CONFIG_DA9062_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_BD70528_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_RETU_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_KEMPLD_WDT is not set
CONFIG_MEN_A21_WDT=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_MADERA=y
# CONFIG_MFD_MADERA_I2C is not set
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
# CONFIG_MFD_CS47L92 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
# CONFIG_MFD_MP2629 is not set
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
# CONFIG_PCF50633_GPIO is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RT5033=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TI_LP87565 is not set
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_LOCHNAGAR=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD70528=y
CONFIG_MFD_ROHM_BD71828=y
# CONFIG_MFD_ROHM_BD957XMUF is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_RAVE_SP_CORE=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
# CONFIG_REGULATOR_BD70528 is not set
# CONFIG_REGULATOR_BD71815 is not set
CONFIG_REGULATOR_BD71828=y
# CONFIG_REGULATOR_BD718XX is not set
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=y
# CONFIG_REGULATOR_LOCHNAGAR is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
# CONFIG_REGULATOR_MAX77826 is not set
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_MCP16502=y
# CONFIG_REGULATOR_MP5416 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MP886X is not set
CONFIG_REGULATOR_MPQ7920=y
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PF8X00 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_SPMI=y
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=y
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_SKY81452 is not set
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_SY8106A is not set
CONFIG_REGULATOR_SY8824X=y
# CONFIG_REGULATOR_SY8827N is not set
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS65086 is not set
# CONFIG_REGULATOR_TPS65090 is not set
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS65910 is not set
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8400=y
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
# CONFIG_LIRC is not set
# CONFIG_RC_DECODERS is not set
CONFIG_RC_DEVICES=y
CONFIG_IR_HIX5HD2=y
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
# CONFIG_IR_SERIAL is not set
CONFIG_IR_SIR=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_MEDIA_CEC_RC=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set
# end of Media drivers
#
# Media ancillary drivers
#
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
# CONFIG_VIDEO_IR_I2C is not set
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=y
# CONFIG_VIDEO_TDA7432 is not set
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=y
# CONFIG_VIDEO_CS3308 is not set
CONFIG_VIDEO_CS5345=y
# CONFIG_VIDEO_CS53L32A is not set
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_UDA1342=y
# CONFIG_VIDEO_WM8775 is not set
CONFIG_VIDEO_WM8739=y
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV748X is not set
CONFIG_VIDEO_ADV7604=y
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=y
CONFIG_VIDEO_ADV7842_CEC=y
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TC358743=y
# CONFIG_VIDEO_TC358743_CEC is not set
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
# CONFIG_VIDEO_TW9903 is not set
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
# CONFIG_VIDEO_VPX3220 is not set
# CONFIG_VIDEO_MAX9286 is not set
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
CONFIG_VIDEO_SAA7185=y
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_ADV7511 is not set
CONFIG_VIDEO_AD9389B=y
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
CONFIG_VIDEO_I2C=y
CONFIG_VIDEO_ST_MIPID02=y
# end of Miscellaneous helper chips
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=y
# CONFIG_VIDEO_HI556 is not set
CONFIG_VIDEO_IMX214=y
# CONFIG_VIDEO_IMX219 is not set
CONFIG_VIDEO_IMX258=y
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
CONFIG_VIDEO_IMX319=y
CONFIG_VIDEO_IMX334=y
CONFIG_VIDEO_IMX355=y
CONFIG_VIDEO_OV02A10=y
CONFIG_VIDEO_OV2640=y
CONFIG_VIDEO_OV2659=y
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
CONFIG_VIDEO_OV5640=y
CONFIG_VIDEO_OV5645=y
CONFIG_VIDEO_OV5647=y
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV7251=y
CONFIG_VIDEO_OV772X=y
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV8856=y
# CONFIG_VIDEO_OV8865 is not set
CONFIG_VIDEO_OV9640=y
# CONFIG_VIDEO_OV9650 is not set
CONFIG_VIDEO_OV13858=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_MT9M001=y
CONFIG_VIDEO_MT9M032=y
CONFIG_VIDEO_MT9M111=y
CONFIG_VIDEO_MT9P031=y
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
# CONFIG_VIDEO_MT9V032 is not set
CONFIG_VIDEO_MT9V111=y
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_NOON010PC30=y
CONFIG_VIDEO_M5MOLS=y
CONFIG_VIDEO_MAX9271_LIB=y
# CONFIG_VIDEO_RDACM20 is not set
CONFIG_VIDEO_RDACM21=y
CONFIG_VIDEO_RJ54N1=y
CONFIG_VIDEO_S5K6AA=y
# CONFIG_VIDEO_S5K6A3 is not set
CONFIG_VIDEO_S5K4ECGX=y
CONFIG_VIDEO_S5K5BAF=y
CONFIG_VIDEO_CCS=y
CONFIG_VIDEO_ET8EK8=y
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
# CONFIG_VIDEO_AK7375 is not set
CONFIG_VIDEO_DW9714=y
# CONFIG_VIDEO_DW9768 is not set
CONFIG_VIDEO_DW9807_VCM=y
# end of Lens drivers
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
CONFIG_VIDEO_LM3560=y
CONFIG_VIDEO_LM3646=y
# end of Flash devices
#
# SPI helper chips
#
# end of SPI helper chips
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
# CONFIG_MEDIA_TUNER_TEA5767 is not set
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
# CONFIG_MEDIA_TUNER_TDA18212 is not set
CONFIG_MEDIA_TUNER_E4000=y
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_R820T=y
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
CONFIG_MEDIA_TUNER_QM1D1B0004=y
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=y
# CONFIG_DVB_STB6100 is not set
CONFIG_DVB_STV090x=y
# CONFIG_DVB_STV0910 is not set
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y
# CONFIG_DVB_MXL5XX is not set
CONFIG_DVB_M88DS3103=y
#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
CONFIG_DVB_TDA18271C2DD=y
CONFIG_DVB_SI2165=y
CONFIG_DVB_MN88472=y
CONFIG_DVB_MN88473=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24123=y
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
CONFIG_DVB_ZL10039=y
# CONFIG_DVB_S5H1420 is not set
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV6110=y
# CONFIG_DVB_STV0900 is not set
CONFIG_DVB_TDA8083=y
# CONFIG_DVB_TDA10086 is not set
CONFIG_DVB_TDA8261=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
# CONFIG_DVB_TDA826X is not set
CONFIG_DVB_TUA6100=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_TS2020=y
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=y
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
CONFIG_DVB_SP887X=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_DRXD=y
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_MT352=y
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=y
# CONFIG_DVB_DIB3000MC is not set
CONFIG_DVB_DIB7000M=y
# CONFIG_DVB_DIB7000P is not set
CONFIG_DVB_DIB9000=y
# CONFIG_DVB_TDA10048 is not set
CONFIG_DVB_AF9013=y
CONFIG_DVB_EC100=y
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_CXD2841ER=y
# CONFIG_DVB_RTL2830 is not set
# CONFIG_DVB_RTL2832 is not set
CONFIG_DVB_SI2168=y
CONFIG_DVB_ZD1301_DEMOD=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
CONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
# CONFIG_DVB_BCM3510 is not set
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_LGDT3305=y
# CONFIG_DVB_LGDT3306A is not set
# CONFIG_DVB_LG2160 is not set
CONFIG_DVB_S5H1409=y
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_S5H1411=y
CONFIG_DVB_MXL692=y
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=y
# CONFIG_DVB_DIB8000 is not set
CONFIG_DVB_MB86A20S=y
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=y
# CONFIG_DVB_MN88443X is not set
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=y
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
# CONFIG_DVB_A8293 is not set
CONFIG_DVB_LGS8GL5=y
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
CONFIG_DVB_TDA665x=y
# CONFIG_DVB_IX2505V is not set
# CONFIG_DVB_M88RS2000 is not set
CONFIG_DVB_AF9033=y
CONFIG_DVB_HORUS3A=y
CONFIG_DVB_ASCOT2E=y
CONFIG_DVB_HELENE=y
#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
# CONFIG_DRM_FBDEV_EMULATION is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
CONFIG_DRM_KOMEDA=y
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_RCAR_DW_HDMI=y
# CONFIG_DRM_RCAR_LVDS is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
# CONFIG_DRM_PANEL_DSI_CM is not set
CONFIG_DRM_PANEL_LVDS=y
# CONFIG_DRM_PANEL_SIMPLE is not set
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9611=y
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
# CONFIG_DRM_NXP_PTN3460 is not set
CONFIG_DRM_PARADE_PS8622=y
# CONFIG_DRM_PARADE_PS8640 is not set
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=y
CONFIG_DRM_SII9234=y
# CONFIG_DRM_SIMPLE_BRIDGE is not set
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=y
# CONFIG_DRM_TOSHIBA_TC358768 is not set
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI86=y
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_CEC=y
# end of Display Interface Bridges
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
# CONFIG_DRM_MXSFB is not set
CONFIG_DRM_ARCPGU=y
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_OPENCORES=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SM501=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_LP8788 is not set
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
# CONFIG_BACKLIGHT_AS3711 is not set
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_RAVE_SP=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_COUGAR=y
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=y
# CONFIG_HID_EZKEY is not set
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_VIVALDI=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_WALTOP is not set
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_HIDPP=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTI=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
CONFIG_HID_PICOLCD_LCD=y
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=y
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support
CONFIG_I2C_HID_CORE=y
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_AAT1290=y
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_KTD2692=y
# CONFIG_LEDS_IS31FL319X is not set
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
# CONFIG_LEDS_LM36274 is not set
CONFIG_LEDS_TPS6105X=y
# CONFIG_LEDS_SGM3140 is not set
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_RT4505=y
# CONFIG_LEDS_RT8515 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_ACCESSIBILITY=y
#
# Speakup console speech
#
# end of Speakup console speech
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
# CONFIG_RTC_DRV_ABB5ZES3 is not set
CONFIG_RTC_DRV_ABEOZ9=y
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_AS3722 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8925 is not set
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BD70528=y
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
CONFIG_RTC_DRV_RX6110=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
CONFIG_RTC_DRV_DS17485=y
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_PCF50633=y
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_CADENCE=y
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_R7301=y
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_HD44780_COMMON=y
# CONFIG_HD44780 is not set
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_HT16K33=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
CONFIG_CHARLCD_BL_ON=y
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=y
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO=y
CONFIG_VFIO_NOIOMMU=y
# CONFIG_VFIO_PCI is not set
CONFIG_VFIO_MDEV=y
CONFIG_VFIO_MDEV_DEVICE=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
CONFIG_VDPA=y
# CONFIG_IFCVF is not set
# CONFIG_VP_VDPA is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_WM831X is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
# CONFIG_COMMON_CLK_SI5341 is not set
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
# CONFIG_COMMON_CLK_SI544 is not set
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_CDCE706 is not set
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_RISCV_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX14577 is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
# CONFIG_EXTCON_PTN5150 is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_TUSB320=y
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_DWC is not set
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_LP3943=y
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_SIFIVE is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=y
CONFIG_RISCV_INTC=y
# CONFIG_SIFIVE_PLIC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_INTEL_GW is not set
CONFIG_RESET_TI_SYSCON=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_CADENCE_TORRENT is not set
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_OCELOT_SERDES=y
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_DTPM=y
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
# CONFIG_ANDROID_BINDERFS is not set
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SPMI_SDAM=y
CONFIG_RAVE_SP_EEPROM=y
CONFIG_NVMEM_RMEM=y
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
# CONFIG_STM_PROTO_SYS_T is not set
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_STM_SOURCE_FTRACE=y
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
# CONFIG_OF_FPGA_REGION is not set
# CONFIG_FPGA_DFL is not set
CONFIG_FSI=y
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_ASPEED=y
# CONFIG_FSI_SCOM is not set
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
# CONFIG_MUX_GPIO is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
CONFIG_MOST=y
CONFIG_MOST_CDEV=y
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
# CONFIG_F2FS_FS_LZ4 is not set
CONFIG_F2FS_FS_ZSTD=y
# CONFIG_F2FS_FS_LZORLE is not set
CONFIG_ZONEFS_FS=y
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_KEY_NOTIFICATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
# CONFIG_FORTIFY_SOURCE is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ESSIV=y
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA256=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_SBITMAP=y
CONFIG_STRING_SELFTEST=y
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_ASHLDI3=y
CONFIG_GENERIC_LIB_ASHRDI3=y
CONFIG_GENERIC_LIB_LSHRDI3=y
CONFIG_GENERIC_LIB_UCMPDI2=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_ASN1_ENCODER=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
CONFIG_DEBUG_FS_ALLOW_NONE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KGDB_QXFER_PKT=y
# CONFIG_KGDB is not set
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_SCALE_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
CONFIG_RCU_STRICT_GRACE_PERIOD=y
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_SAMPLES=y
CONFIG_SAMPLE_KOBJECT=y
# CONFIG_STRICT_DEVMEM is not set
#
# riscv Debugging
#
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
2021-06-24 8:50 ` Feng Tang
@ 2021-06-24 9:37 ` Guo Ren
0 siblings, 0 replies; 13+ messages in thread
From: Guo Ren @ 2021-06-24 9:37 UTC (permalink / raw)
To: Feng Tang
Cc: lkp, Masahiro Yamada, kbuild-all, linux-csky, linux-kbuild,
Andrew Morton, Thomas Gleixner, Andi Kleen, ?????????
On Thu, Jun 24, 2021 at 4:50 PM Feng Tang <feng.tang@intel.com> wrote:
>
> On Thu, Jun 24, 2021 at 04:06:51PM +0800, Guo Ren wrote:
> > On Wed, Jun 23, 2021 at 4:59 PM Feng Tang <feng.tang@intel.com> wrote:
> > >
> > > Add linux-csky list and originally cced people and replace the linux-mm
> > > with linux-kbuild list, which match the discussion better and avoid
> > > email noise for mm people.
> > >
> > > On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> > > > On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > > > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > > > > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > > > > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > > > > config: csky-randconfig-c024-20210622 (attached as .config)
> > > > > compiler: csky-linux-gcc (GCC) 9.3.0
> > > > > reproduce (this is a W=1 build):
> > > > > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > > > chmod +x ~/bin/make.cross
> > > > > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > > > > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > > > > git fetch --no-tags linux-next master
> > > > > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > > > > # save the attached .config to linux build tree
> > > > > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
> > >
> > > > Thanks for the report.
> > > >
> > > > I just reproduced the issue locally, with similar log:
> > > >
> > > > CC drivers/target/target_core_sbc.o
> > > > {standard input}: Assembler messages:
> > > > {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> > > > {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> > > > {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> > > > make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> > > > m
> > > >
> > > > And when I changed the function align option from 64 to 32, the
> > > > compilation did pass, so this looks to be related with the alignment
> > > > option.
> > > >
> > > > I'm not very familiar with compiler, and will try to check more.
> > >
> > > I did some check and found the error info comes from the assembler
> > > for 'csky' in binutils' gas/config/tc-csky.c, and I could hardly
> > > dive deeper into the code as limited by my knowledge.
> > >
> > >
> > > > I know it works on x86_64, but don't know how about other
> > > > architectures, and if 'csky' is the only not working one, one
> > > > workaround I can think of is to add kconfig dependency for !csky
> > >
> > > I reused the 0day's reproduce process, and tried on arm64, powerpc64,
> > > and arc, the kernel compilation all succeeded. So maybe we can
> > > add some dependency for this debug option like:
> > >
> > > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > > index 3cf48998a374..eb035b31657f 100644
> > > --- a/lib/Kconfig.debug
> > > +++ b/lib/Kconfig.debug
> > > @@ -415,7 +415,8 @@ config SECTION_MISMATCH_WARN_ONLY
> > > If unsure, say Y.
> > >
> > > config DEBUG_FORCE_FUNCTION_ALIGN_64B
> > > - bool "Force all function address 64B aligned" if EXPERT
> > > + bool "Force all function address 64B aligned"
> > > + depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
> > > help
> > > There are cases that a commit from one domain changes the function
> > > address alignment of other domains, and cause magic performance
> > >
> > > Any comments? thanks!
> > Have tried riscv32? I don't think csky is the only problem.
> >
> > Assembler just follows gcc backend result and also depends on ISA
> > design. Our condition branch seems not far enough.
>
> Thanks for the info.
>
> I just used 0day's cross compile env to compile 'riscv32', and it
> succeeded with 64B align option. (the kernel config is attached)
Thx for the info, we'll have a look at it.
>
> Anyway, this debug option is for debug only, and nice to have. If
> it doesn't work on one architecture, I dont' think it means a severe
> problem.
>
> Thanks,
> Feng
>
> > Cc: xianmiao_qu@c-sky.com
> >
> > >
> > > - Feng
> > >
> > > > Thanks,
> > > > Feng
> > > >
> > > >
> >
> >
> >
> > --
> > Best Regards
> > Guo Ren
> >
> > ML: https://lore.kernel.org/linux-csky/
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
@ 2021-06-24 9:37 ` Guo Ren
0 siblings, 0 replies; 13+ messages in thread
From: Guo Ren @ 2021-06-24 9:37 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 4850 bytes --]
On Thu, Jun 24, 2021 at 4:50 PM Feng Tang <feng.tang@intel.com> wrote:
>
> On Thu, Jun 24, 2021 at 04:06:51PM +0800, Guo Ren wrote:
> > On Wed, Jun 23, 2021 at 4:59 PM Feng Tang <feng.tang@intel.com> wrote:
> > >
> > > Add linux-csky list and originally cced people and replace the linux-mm
> > > with linux-kbuild list, which match the discussion better and avoid
> > > email noise for mm people.
> > >
> > > On Tue, Jun 22, 2021 at 05:48:18PM +0800, Tang, Feng wrote:
> > > > On Tue, Jun 22, 2021 at 09:49:05AM +0800, kernel test robot wrote:
> > > > > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
> > > > > head: 889bab4c367a0ef58208fd80fafa74bb6e2dca26
> > > > > commit: cf536e185869d4815d506e777bcca6edd9966a6e [3665/11714] Makefile: extend 32B aligned debug option to 64B aligned
> > > > > config: csky-randconfig-c024-20210622 (attached as .config)
> > > > > compiler: csky-linux-gcc (GCC) 9.3.0
> > > > > reproduce (this is a W=1 build):
> > > > > wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > > > chmod +x ~/bin/make.cross
> > > > > # https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf536e185869d4815d506e777bcca6edd9966a6e
> > > > > git remote add linux-next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> > > > > git fetch --no-tags linux-next master
> > > > > git checkout cf536e185869d4815d506e777bcca6edd9966a6e
> > > > > # save the attached .config to linux build tree
> > > > > COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=csky
> > >
> > > > Thanks for the report.
> > > >
> > > > I just reproduced the issue locally, with similar log:
> > > >
> > > > CC drivers/target/target_core_sbc.o
> > > > {standard input}: Assembler messages:
> > > > {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e)
> > > > {standard input}:2653: Error: pcrel offset for branch to .LS0015 too far (0x34)
> > > > {standard input}:2659: Error: pcrel offset for branch to .LS0015 too far (0x2c)
> > > > make[2]: *** [scripts/Makefile.build:272: drivers/target/target_core_sbc.o] Error 1
> > > > m
> > > >
> > > > And when I changed the function align option from 64 to 32, the
> > > > compilation did pass, so this looks to be related with the alignment
> > > > option.
> > > >
> > > > I'm not very familiar with compiler, and will try to check more.
> > >
> > > I did some check and found the error info comes from the assembler
> > > for 'csky' in binutils' gas/config/tc-csky.c, and I could hardly
> > > dive deeper into the code as limited by my knowledge.
> > >
> > >
> > > > I know it works on x86_64, but don't know how about other
> > > > architectures, and if 'csky' is the only not working one, one
> > > > workaround I can think of is to add kconfig dependency for !csky
> > >
> > > I reused the 0day's reproduce process, and tried on arm64, powerpc64,
> > > and arc, the kernel compilation all succeeded. So maybe we can
> > > add some dependency for this debug option like:
> > >
> > > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> > > index 3cf48998a374..eb035b31657f 100644
> > > --- a/lib/Kconfig.debug
> > > +++ b/lib/Kconfig.debug
> > > @@ -415,7 +415,8 @@ config SECTION_MISMATCH_WARN_ONLY
> > > If unsure, say Y.
> > >
> > > config DEBUG_FORCE_FUNCTION_ALIGN_64B
> > > - bool "Force all function address 64B aligned" if EXPERT
> > > + bool "Force all function address 64B aligned"
> > > + depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC)
> > > help
> > > There are cases that a commit from one domain changes the function
> > > address alignment of other domains, and cause magic performance
> > >
> > > Any comments? thanks!
> > Have tried riscv32? I don't think csky is the only problem.
> >
> > Assembler just follows gcc backend result and also depends on ISA
> > design. Our condition branch seems not far enough.
>
> Thanks for the info.
>
> I just used 0day's cross compile env to compile 'riscv32', and it
> succeeded with 64B align option. (the kernel config is attached)
Thx for the info, we'll have a look at it.
>
> Anyway, this debug option is for debug only, and nice to have. If
> it doesn't work on one architecture, I dont' think it means a severe
> problem.
>
> Thanks,
> Feng
>
> > Cc: xianmiao_qu(a)c-sky.com
> >
> > >
> > > - Feng
> > >
> > > > Thanks,
> > > > Feng
> > > >
> > > >
> >
> >
> >
> > --
> > Best Regards
> > Guo Ren
> >
> > ML: https://lore.kernel.org/linux-csky/
--
Best Regards
Guo Ren
ML: https://lore.kernel.org/linux-csky/
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2021-06-24 9:37 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-22 1:49 [linux-next:master 3665/11714] {standard input}:2644: Error: pcrel offset for branch to .LS0015 too far (0x3e) kernel test robot
2021-06-22 1:49 ` kernel test robot
2021-06-22 9:48 ` Feng Tang
2021-06-22 9:48 ` Feng Tang
2021-06-22 9:56 ` Feng Tang
2021-06-22 9:56 ` Feng Tang
2021-06-23 8:58 ` Feng Tang
2021-06-23 8:58 ` Feng Tang
2021-06-24 8:06 ` Guo Ren
2021-06-24 8:06 ` Guo Ren
2021-06-24 8:50 ` Feng Tang
2021-06-24 9:37 ` Guo Ren
2021-06-24 9:37 ` Guo Ren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.