* [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
same IP and have commit their codes, which are mixed with PLDA
controller codes and Microchip platform codes.
For re-use the PLDA controller codes, I request refactoring microchip
codes, move PLDA common codes to PLDA files.
Desigware and Cadence is good example for refactoring codes.
----------------------------------------------------------
The refactoring patches total number is 16,(patch 1-16)
which do NOT contain changing logic of codes.
These patches just contain three type basic operations.
(rename, modify codes to support starfive platform, and moving to common file)
If these patched are all be reviewed. They can be accepted first.
Refactoring patches can be devided to different groups
1. (patch 1- 3 is the prepare work of refactoring)
patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
docs from microchip,pcie-host.yaml
patch2 is move PolarFire codes to PLDA directory.
patch3 is move PLDA IP register macros to plda-pcie.h
2. (patch4 - 6 is processing and re-use PCIe host instance)
patch4 is add bridge_addr field to PCIe host instance.
patch5 is rename data structure in microchip codes.
patch6 is moving two data structures to head file
3. (patch 7 - 9 are for re-use two PCIe setup function)
patch7 is rename two setup functions in microchip codes, prepare to move
to common file.
patch8 is change the arguments of plda_pcie_setup_iomems()
patch9 is move the two setup functions to common file pcie-plda-host.c
4.(patch 10 - 16 are for re-use interupt processing codes)
patch10 is rename the IRQ related functions, prepare to move to
pcie-plda-host.c
patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
and microchip two platforms.
patch16 is move IRQ related functions to pcie-plda-host.c
------------------------------------------------------------
The remainder patches (patch 17 -20) are not refactoring patch.
They are for adding StarFive codes and dont modify the microchip's
codes.
patch17 is Add PLDA event interrupt codes and host init/deinit functions.
patch18 is add StarFive JH7110 PCIe dt-binding doc.
patch19 is add StarFive JH7110 Soc PCIe codes.
patch20 is Starfive dts config
This patchset is base on v6.7-rc1
previous version:
v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
change:
v11:
check and modify some commit messages again.
All the codes are the same with v10.
v10:
All the commit message set to fit in 75 columns.
All the codes fit in less than 80 colunms.
patch 14:
Commit message changes suggested by Conor.
patch 19:
Add 100 ms delay macro to pci.h
generic phy pointer related codes moving to pcie-starfive.c
This patch Change pcie-starfive only, bus_ops move to patch 16.
Some Codes changes suggested by Bjorn.
v9:
v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
patch 4 - 16: Add new review tags and add more accurate commit messages.
patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
plda driver become to whole driver.
v8:
The patch description in cover-letter has been changed.
v7 patch 4 split to v8 patch 4 - 6.
(It is patches about re-use pcie host data structure, new patches just contain one
function modification. It is more reguluar and easier to review).
patch 7- 9: modify the commit messages and add reason of
modifcation.
patch10- 16 :
Add review tag and add more commit messages to declear the
reason of modifying the codes.
patch17: plda_handle_events() using bit mask macro. The function are
easier to read.
v7:
patch17: fix the build warning.
patch19: Some format changes (Emil's comment)
patch20: change the pcie node sequences by alphabetical
delete the "interupt-parent" in pcie node.
v6:
v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
patch 9: Just move the two setup functions only
patch 19 : draw a graph of PLDA local register, make it easier to
review the codes.
v5 patch 7 split to patch 10- 16. Each patch just contain one
function modification. It is more regular.
patch 10: rename IRQ related functions.
patch 11 - 15 : modify the events codes, total five patch.
patch 16: move IRQ related functions to pcie-plda-host.c
patch 19- 20 using "linux,pci-domain" dts setting.
Minda Chen (20):
dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
PCI: microchip: Move pcie-microchip-host.c to plda directory
PCI: microchip: Move PLDA IP register macros to pcie-plda.h
PCI: microchip: Add bridge_addr field to struct mc_pcie
PCI: microchip: Rename two PCIe data structures
PCI: microchip: Move PCIe host data structures to plda-pcie.h
PCI: microchip: Rename two setup functions
PCI: microchip: Change the argument of plda_pcie_setup_iomems()
PCI: microchip: Move setup functions to pcie-plda-host.c
PCI: microchip: Rename interrupt related functions
PCI: microchip: Add num_events field to struct plda_pcie_rp
PCI: microchip: Add request_event_irq() callback function
PCI: microchip: Add INTx and MSI event num to struct plda_event
PCI: microchip: Add get_events() callback function
PCI: microchip: Add event IRQ domain ops to struct plda_event
PCI: microchip: Move IRQ functions to pcie-plda-host.c
PCI: plda: Add event interrupt codes and host init/deinit functions
dt-bindings: PCI: Add StarFive JH7110 PCIe controller
PCI: starfive: Add JH7110 PCIe controller
riscv: dts: starfive: add PCIe dts configuration for JH7110
.../bindings/pci/microchip,pcie-host.yaml | 55 +-
.../pci/plda,xpressrich3-axi-common.yaml | 75 ++
.../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
MAINTAINERS | 19 +-
.../jh7110-starfive-visionfive-2.dtsi | 64 ++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
drivers/pci/controller/Kconfig | 9 +-
drivers/pci/controller/Makefile | 2 +-
drivers/pci/controller/plda/Kconfig | 29 +
drivers/pci/controller/plda/Makefile | 4 +
.../{ => plda}/pcie-microchip-host.c | 602 ++--------------
drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
drivers/pci/pci.h | 7 +
15 files changed, 1851 insertions(+), 604 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
create mode 100644 drivers/pci/controller/plda/Kconfig
create mode 100644 drivers/pci/controller/plda/Makefile
rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
create mode 100644 drivers/pci/controller/plda/pcie-plda.h
create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
--
2.17.1
^ permalink raw reply [flat|nested] 74+ messages in thread
* [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
same IP and have commit their codes, which are mixed with PLDA
controller codes and Microchip platform codes.
For re-use the PLDA controller codes, I request refactoring microchip
codes, move PLDA common codes to PLDA files.
Desigware and Cadence is good example for refactoring codes.
----------------------------------------------------------
The refactoring patches total number is 16,(patch 1-16)
which do NOT contain changing logic of codes.
These patches just contain three type basic operations.
(rename, modify codes to support starfive platform, and moving to common file)
If these patched are all be reviewed. They can be accepted first.
Refactoring patches can be devided to different groups
1. (patch 1- 3 is the prepare work of refactoring)
patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
docs from microchip,pcie-host.yaml
patch2 is move PolarFire codes to PLDA directory.
patch3 is move PLDA IP register macros to plda-pcie.h
2. (patch4 - 6 is processing and re-use PCIe host instance)
patch4 is add bridge_addr field to PCIe host instance.
patch5 is rename data structure in microchip codes.
patch6 is moving two data structures to head file
3. (patch 7 - 9 are for re-use two PCIe setup function)
patch7 is rename two setup functions in microchip codes, prepare to move
to common file.
patch8 is change the arguments of plda_pcie_setup_iomems()
patch9 is move the two setup functions to common file pcie-plda-host.c
4.(patch 10 - 16 are for re-use interupt processing codes)
patch10 is rename the IRQ related functions, prepare to move to
pcie-plda-host.c
patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
and microchip two platforms.
patch16 is move IRQ related functions to pcie-plda-host.c
------------------------------------------------------------
The remainder patches (patch 17 -20) are not refactoring patch.
They are for adding StarFive codes and dont modify the microchip's
codes.
patch17 is Add PLDA event interrupt codes and host init/deinit functions.
patch18 is add StarFive JH7110 PCIe dt-binding doc.
patch19 is add StarFive JH7110 Soc PCIe codes.
patch20 is Starfive dts config
This patchset is base on v6.7-rc1
previous version:
v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
change:
v11:
check and modify some commit messages again.
All the codes are the same with v10.
v10:
All the commit message set to fit in 75 columns.
All the codes fit in less than 80 colunms.
patch 14:
Commit message changes suggested by Conor.
patch 19:
Add 100 ms delay macro to pci.h
generic phy pointer related codes moving to pcie-starfive.c
This patch Change pcie-starfive only, bus_ops move to patch 16.
Some Codes changes suggested by Bjorn.
v9:
v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
patch 4 - 16: Add new review tags and add more accurate commit messages.
patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
plda driver become to whole driver.
v8:
The patch description in cover-letter has been changed.
v7 patch 4 split to v8 patch 4 - 6.
(It is patches about re-use pcie host data structure, new patches just contain one
function modification. It is more reguluar and easier to review).
patch 7- 9: modify the commit messages and add reason of
modifcation.
patch10- 16 :
Add review tag and add more commit messages to declear the
reason of modifying the codes.
patch17: plda_handle_events() using bit mask macro. The function are
easier to read.
v7:
patch17: fix the build warning.
patch19: Some format changes (Emil's comment)
patch20: change the pcie node sequences by alphabetical
delete the "interupt-parent" in pcie node.
v6:
v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
patch 9: Just move the two setup functions only
patch 19 : draw a graph of PLDA local register, make it easier to
review the codes.
v5 patch 7 split to patch 10- 16. Each patch just contain one
function modification. It is more regular.
patch 10: rename IRQ related functions.
patch 11 - 15 : modify the events codes, total five patch.
patch 16: move IRQ related functions to pcie-plda-host.c
patch 19- 20 using "linux,pci-domain" dts setting.
Minda Chen (20):
dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
PCI: microchip: Move pcie-microchip-host.c to plda directory
PCI: microchip: Move PLDA IP register macros to pcie-plda.h
PCI: microchip: Add bridge_addr field to struct mc_pcie
PCI: microchip: Rename two PCIe data structures
PCI: microchip: Move PCIe host data structures to plda-pcie.h
PCI: microchip: Rename two setup functions
PCI: microchip: Change the argument of plda_pcie_setup_iomems()
PCI: microchip: Move setup functions to pcie-plda-host.c
PCI: microchip: Rename interrupt related functions
PCI: microchip: Add num_events field to struct plda_pcie_rp
PCI: microchip: Add request_event_irq() callback function
PCI: microchip: Add INTx and MSI event num to struct plda_event
PCI: microchip: Add get_events() callback function
PCI: microchip: Add event IRQ domain ops to struct plda_event
PCI: microchip: Move IRQ functions to pcie-plda-host.c
PCI: plda: Add event interrupt codes and host init/deinit functions
dt-bindings: PCI: Add StarFive JH7110 PCIe controller
PCI: starfive: Add JH7110 PCIe controller
riscv: dts: starfive: add PCIe dts configuration for JH7110
.../bindings/pci/microchip,pcie-host.yaml | 55 +-
.../pci/plda,xpressrich3-axi-common.yaml | 75 ++
.../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
MAINTAINERS | 19 +-
.../jh7110-starfive-visionfive-2.dtsi | 64 ++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
drivers/pci/controller/Kconfig | 9 +-
drivers/pci/controller/Makefile | 2 +-
drivers/pci/controller/plda/Kconfig | 29 +
drivers/pci/controller/plda/Makefile | 4 +
.../{ => plda}/pcie-microchip-host.c | 602 ++--------------
drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
drivers/pci/pci.h | 7 +
15 files changed, 1851 insertions(+), 604 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
create mode 100644 drivers/pci/controller/plda/Kconfig
create mode 100644 drivers/pci/controller/plda/Makefile
rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
create mode 100644 drivers/pci/controller/plda/pcie-plda.h
create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* [PATCH v11 01/20] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:48 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add PLDA XpressRICH PCIe host common properties dt-binding doc.
PolarFire PCIe host using PLDA IP. Move common properties from Microchip
PolarFire PCIe host to PLDA files.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Clark <inindev@gmail.com>
---
.../bindings/pci/microchip,pcie-host.yaml | 55 +-------------
.../pci/plda,xpressrich3-axi-common.yaml | 75 +++++++++++++++++++
2 files changed, 76 insertions(+), 54 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index f7a3c2636355..7c2d51221f65 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -10,21 +10,13 @@ maintainers:
- Daire McNamara <daire.mcnamara@microchip.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: plda,xpressrich3-axi-common.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
properties:
compatible:
const: microchip,pcie-host-1.0 # PolarFire
- reg:
- maxItems: 2
-
- reg-names:
- items:
- - const: cfg
- - const: apb
-
clocks:
description:
Fabric Interface Controllers, FICs, are the interface between the FPGA
@@ -52,18 +44,6 @@ properties:
items:
pattern: '^fic[0-3]$'
- interrupts:
- minItems: 1
- items:
- - description: PCIe host controller
- - description: builtin MSI controller
-
- interrupt-names:
- minItems: 1
- items:
- - const: pcie
- - const: msi
-
ranges:
maxItems: 1
@@ -71,39 +51,6 @@ properties:
minItems: 1
maxItems: 6
- msi-controller:
- description: Identifies the node as an MSI controller.
-
- msi-parent:
- description: MSI controller the device is capable of using.
-
- interrupt-controller:
- type: object
- properties:
- '#address-cells':
- const: 0
-
- '#interrupt-cells':
- const: 1
-
- interrupt-controller: true
-
- required:
- - '#address-cells'
- - '#interrupt-cells'
- - interrupt-controller
-
- additionalProperties: false
-
-required:
- - reg
- - reg-names
- - "#interrupt-cells"
- - interrupts
- - interrupt-map-mask
- - interrupt-map
- - msi-controller
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
new file mode 100644
index 000000000000..31bb17b11e58
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/plda,xpressrich3-axi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PLDA XpressRICH PCIe host common properties
+
+maintainers:
+ - Daire McNamara <daire.mcnamara@microchip.com>
+ - Kevin Xie <kevin.xie@starfivetech.com>
+
+description:
+ Generic PLDA XpressRICH PCIe host common properties.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: apb
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: PCIe host controller
+ - description: builtin MSI controller
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: pcie
+ - const: msi
+
+ msi-controller:
+ description: Identifies the node as an MSI controller.
+
+ msi-parent:
+ description: MSI controller the device is capable of using.
+
+ interrupt-controller:
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - reg
+ - reg-names
+ - interrupts
+ - msi-controller
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+
+additionalProperties: true
+
+...
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 01/20] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add PLDA XpressRICH PCIe host common properties dt-binding doc.
PolarFire PCIe host using PLDA IP. Move common properties from Microchip
PolarFire PCIe host to PLDA files.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Clark <inindev@gmail.com>
---
.../bindings/pci/microchip,pcie-host.yaml | 55 +-------------
.../pci/plda,xpressrich3-axi-common.yaml | 75 +++++++++++++++++++
2 files changed, 76 insertions(+), 54 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index f7a3c2636355..7c2d51221f65 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -10,21 +10,13 @@ maintainers:
- Daire McNamara <daire.mcnamara@microchip.com>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: plda,xpressrich3-axi-common.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
properties:
compatible:
const: microchip,pcie-host-1.0 # PolarFire
- reg:
- maxItems: 2
-
- reg-names:
- items:
- - const: cfg
- - const: apb
-
clocks:
description:
Fabric Interface Controllers, FICs, are the interface between the FPGA
@@ -52,18 +44,6 @@ properties:
items:
pattern: '^fic[0-3]$'
- interrupts:
- minItems: 1
- items:
- - description: PCIe host controller
- - description: builtin MSI controller
-
- interrupt-names:
- minItems: 1
- items:
- - const: pcie
- - const: msi
-
ranges:
maxItems: 1
@@ -71,39 +51,6 @@ properties:
minItems: 1
maxItems: 6
- msi-controller:
- description: Identifies the node as an MSI controller.
-
- msi-parent:
- description: MSI controller the device is capable of using.
-
- interrupt-controller:
- type: object
- properties:
- '#address-cells':
- const: 0
-
- '#interrupt-cells':
- const: 1
-
- interrupt-controller: true
-
- required:
- - '#address-cells'
- - '#interrupt-cells'
- - interrupt-controller
-
- additionalProperties: false
-
-required:
- - reg
- - reg-names
- - "#interrupt-cells"
- - interrupts
- - interrupt-map-mask
- - interrupt-map
- - msi-controller
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
new file mode 100644
index 000000000000..31bb17b11e58
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/plda,xpressrich3-axi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PLDA XpressRICH PCIe host common properties
+
+maintainers:
+ - Daire McNamara <daire.mcnamara@microchip.com>
+ - Kevin Xie <kevin.xie@starfivetech.com>
+
+description:
+ Generic PLDA XpressRICH PCIe host common properties.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: apb
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: PCIe host controller
+ - description: builtin MSI controller
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: pcie
+ - const: msi
+
+ msi-controller:
+ description: Identifies the node as an MSI controller.
+
+ msi-parent:
+ description: MSI controller the device is capable of using.
+
+ interrupt-controller:
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - reg
+ - reg-names
+ - interrupts
+ - msi-controller
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+
+additionalProperties: true
+
+...
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 02/20] PCI: microchip: Move pcie-microchip-host.c to plda directory
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:48 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
For Microchip Polarfire PCIe host is PLDA XpressRich IP, move to plda
directory. Prepare for refactor the codes.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
MAINTAINERS | 4 ++--
drivers/pci/controller/Kconfig | 9 +--------
drivers/pci/controller/Makefile | 2 +-
drivers/pci/controller/plda/Kconfig | 14 ++++++++++++++
drivers/pci/controller/plda/Makefile | 2 ++
.../controller/{ => plda}/pcie-microchip-host.c | 2 +-
6 files changed, 21 insertions(+), 12 deletions(-)
create mode 100644 drivers/pci/controller/plda/Kconfig
create mode 100644 drivers/pci/controller/plda/Makefile
rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (99%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 97f51d5ec1cf..aaccaa89ff2d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16844,7 +16844,7 @@ M: Daire McNamara <daire.mcnamara@microchip.com>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/microchip*
-F: drivers/pci/controller/*microchip*
+F: drivers/pci/controller/plda/*microchip*
PCIE DRIVER FOR QUALCOMM MSM
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@@ -18643,7 +18643,7 @@ F: drivers/char/hw_random/mpfs-rng.c
F: drivers/clk/microchip/clk-mpfs*.c
F: drivers/i2c/busses/i2c-microchip-corei2c.c
F: drivers/mailbox/mailbox-mpfs.c
-F: drivers/pci/controller/pcie-microchip-host.c
+F: drivers/pci/controller/plda/pcie-microchip-host.c
F: drivers/pwm/pwm-microchip-core.c
F: drivers/reset/reset-mpfs.c
F: drivers/rtc/rtc-mpfs.c
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index e534c02ee34f..4d2c188f5835 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -215,14 +215,6 @@ config PCIE_MT7621
help
This selects a driver for the MediaTek MT7621 PCIe Controller.
-config PCIE_MICROCHIP_HOST
- tristate "Microchip AXI PCIe controller"
- depends on PCI_MSI && OF
- select PCI_HOST_COMMON
- help
- Say Y here if you want kernel to support the Microchip AXI PCIe
- Host Bridge driver.
-
config PCI_HYPERV_INTERFACE
tristate "Microsoft Hyper-V PCI Interface"
depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI
@@ -356,4 +348,5 @@ config PCIE_XILINX_CPM
source "drivers/pci/controller/cadence/Kconfig"
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
+source "drivers/pci/controller/plda/Kconfig"
endmenu
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index f2b19e6174af..038ccbd9e3ba 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
-obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
obj-$(CONFIG_VMD) += vmd.o
obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
@@ -44,6 +43,7 @@ obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
obj-y += mobiveil/
+obj-y += plda/
# The following drivers are for devices that use the generic ACPI
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
new file mode 100644
index 000000000000..5cb3be4fc98c
--- /dev/null
+++ b/drivers/pci/controller/plda/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "PLDA-based PCIe controllers"
+ depends on PCI
+
+config PCIE_MICROCHIP_HOST
+ tristate "Microchip AXI PCIe controller"
+ depends on PCI_MSI && OF
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want kernel to support the Microchip AXI PCIe
+ Host Bridge driver.
+
+endmenu
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
new file mode 100644
index 000000000000..e1a265cbf91c
--- /dev/null
+++ b/drivers/pci/controller/plda/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
similarity index 99%
rename from drivers/pci/controller/pcie-microchip-host.c
rename to drivers/pci/controller/plda/pcie-microchip-host.c
index 137fb8570ba2..cb09a8137e25 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -18,7 +18,7 @@
#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../pci.h"
+#include "../../pci.h"
/* Number of MSI IRQs */
#define MC_MAX_NUM_MSI_IRQS 32
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 02/20] PCI: microchip: Move pcie-microchip-host.c to plda directory
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
For Microchip Polarfire PCIe host is PLDA XpressRich IP, move to plda
directory. Prepare for refactor the codes.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
MAINTAINERS | 4 ++--
drivers/pci/controller/Kconfig | 9 +--------
drivers/pci/controller/Makefile | 2 +-
drivers/pci/controller/plda/Kconfig | 14 ++++++++++++++
drivers/pci/controller/plda/Makefile | 2 ++
.../controller/{ => plda}/pcie-microchip-host.c | 2 +-
6 files changed, 21 insertions(+), 12 deletions(-)
create mode 100644 drivers/pci/controller/plda/Kconfig
create mode 100644 drivers/pci/controller/plda/Makefile
rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (99%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 97f51d5ec1cf..aaccaa89ff2d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16844,7 +16844,7 @@ M: Daire McNamara <daire.mcnamara@microchip.com>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/microchip*
-F: drivers/pci/controller/*microchip*
+F: drivers/pci/controller/plda/*microchip*
PCIE DRIVER FOR QUALCOMM MSM
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@@ -18643,7 +18643,7 @@ F: drivers/char/hw_random/mpfs-rng.c
F: drivers/clk/microchip/clk-mpfs*.c
F: drivers/i2c/busses/i2c-microchip-corei2c.c
F: drivers/mailbox/mailbox-mpfs.c
-F: drivers/pci/controller/pcie-microchip-host.c
+F: drivers/pci/controller/plda/pcie-microchip-host.c
F: drivers/pwm/pwm-microchip-core.c
F: drivers/reset/reset-mpfs.c
F: drivers/rtc/rtc-mpfs.c
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index e534c02ee34f..4d2c188f5835 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -215,14 +215,6 @@ config PCIE_MT7621
help
This selects a driver for the MediaTek MT7621 PCIe Controller.
-config PCIE_MICROCHIP_HOST
- tristate "Microchip AXI PCIe controller"
- depends on PCI_MSI && OF
- select PCI_HOST_COMMON
- help
- Say Y here if you want kernel to support the Microchip AXI PCIe
- Host Bridge driver.
-
config PCI_HYPERV_INTERFACE
tristate "Microsoft Hyper-V PCI Interface"
depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI
@@ -356,4 +348,5 @@ config PCIE_XILINX_CPM
source "drivers/pci/controller/cadence/Kconfig"
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
+source "drivers/pci/controller/plda/Kconfig"
endmenu
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index f2b19e6174af..038ccbd9e3ba 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
-obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
obj-$(CONFIG_VMD) += vmd.o
obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
@@ -44,6 +43,7 @@ obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
obj-y += mobiveil/
+obj-y += plda/
# The following drivers are for devices that use the generic ACPI
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
new file mode 100644
index 000000000000..5cb3be4fc98c
--- /dev/null
+++ b/drivers/pci/controller/plda/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "PLDA-based PCIe controllers"
+ depends on PCI
+
+config PCIE_MICROCHIP_HOST
+ tristate "Microchip AXI PCIe controller"
+ depends on PCI_MSI && OF
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want kernel to support the Microchip AXI PCIe
+ Host Bridge driver.
+
+endmenu
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
new file mode 100644
index 000000000000..e1a265cbf91c
--- /dev/null
+++ b/drivers/pci/controller/plda/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
similarity index 99%
rename from drivers/pci/controller/pcie-microchip-host.c
rename to drivers/pci/controller/plda/pcie-microchip-host.c
index 137fb8570ba2..cb09a8137e25 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -18,7 +18,7 @@
#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../pci.h"
+#include "../../pci.h"
/* Number of MSI IRQs */
#define MC_MAX_NUM_MSI_IRQS 32
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 03/20] PCI: microchip: Move PLDA IP register macros to pcie-plda.h
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:48 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move PLDA PCIe host controller IP registers macros to pcie-plda.h,
including bridge registers and local IRQ event number.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
MAINTAINERS | 8 ++
.../pci/controller/plda/pcie-microchip-host.c | 108 +++---------------
drivers/pci/controller/plda/pcie-plda.h | 102 +++++++++++++++++
3 files changed, 126 insertions(+), 92 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda.h
diff --git a/MAINTAINERS b/MAINTAINERS
index aaccaa89ff2d..4c08d9354dff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16612,6 +16612,14 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
F: drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
+PCI DRIVER FOR PLDA PCIE IP
+M: Daire McNamara <daire.mcnamara@microchip.com>
+M: Kevin Xie <kevin.xie@starfivetech.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/plda,*
+F: drivers/pci/controller/plda/*plda*
+
PCI DRIVER FOR RENESAS R-CAR
M: Marek Vasut <marek.vasut+renesas@gmail.com>
M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index cb09a8137e25..a34ec6aad4be 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include "../../pci.h"
+#include "pcie-plda.h"
/* Number of MSI IRQs */
#define MC_MAX_NUM_MSI_IRQS 32
@@ -30,84 +31,6 @@
#define MC_PCIE_BRIDGE_ADDR (MC_PCIE1_BRIDGE_ADDR)
#define MC_PCIE_CTRL_ADDR (MC_PCIE1_CTRL_ADDR)
-/* PCIe Bridge Phy Regs */
-#define PCIE_PCI_IRQ_DW0 0xa8
-#define MSIX_CAP_MASK BIT(31)
-#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
-#define NUM_MSI_MSGS_SHIFT 4
-
-#define IMASK_LOCAL 0x180
-#define DMA_END_ENGINE_0_MASK 0x00000000u
-#define DMA_END_ENGINE_0_SHIFT 0
-#define DMA_END_ENGINE_1_MASK 0x00000000u
-#define DMA_END_ENGINE_1_SHIFT 1
-#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
-#define DMA_ERROR_ENGINE_0_SHIFT 8
-#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
-#define DMA_ERROR_ENGINE_1_SHIFT 9
-#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
-#define A_ATR_EVT_POST_ERR_SHIFT 16
-#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
-#define A_ATR_EVT_FETCH_ERR_SHIFT 17
-#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
-#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
-#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define A_ATR_EVT_DOORBELL_SHIFT 19
-#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
-#define P_ATR_EVT_POST_ERR_SHIFT 20
-#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
-#define P_ATR_EVT_FETCH_ERR_SHIFT 21
-#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
-#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
-#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define P_ATR_EVT_DOORBELL_SHIFT 23
-#define PM_MSI_INT_INTA_MASK 0x01000000u
-#define PM_MSI_INT_INTA_SHIFT 24
-#define PM_MSI_INT_INTB_MASK 0x02000000u
-#define PM_MSI_INT_INTB_SHIFT 25
-#define PM_MSI_INT_INTC_MASK 0x04000000u
-#define PM_MSI_INT_INTC_SHIFT 26
-#define PM_MSI_INT_INTD_MASK 0x08000000u
-#define PM_MSI_INT_INTD_SHIFT 27
-#define PM_MSI_INT_INTX_MASK 0x0f000000u
-#define PM_MSI_INT_INTX_SHIFT 24
-#define PM_MSI_INT_MSI_MASK 0x10000000u
-#define PM_MSI_INT_MSI_SHIFT 28
-#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
-#define PM_MSI_INT_AER_EVT_SHIFT 29
-#define PM_MSI_INT_EVENTS_MASK 0x40000000u
-#define PM_MSI_INT_EVENTS_SHIFT 30
-#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
-#define PM_MSI_INT_SYS_ERR_SHIFT 31
-#define NUM_LOCAL_EVENTS 15
-#define ISTATUS_LOCAL 0x184
-#define IMASK_HOST 0x188
-#define ISTATUS_HOST 0x18c
-#define IMSI_ADDR 0x190
-#define ISTATUS_MSI 0x194
-
-/* PCIe Master table init defines */
-#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
-#define ATR0_PCIE_ATR_SIZE 0x25
-#define ATR0_PCIE_ATR_SIZE_SHIFT 1
-#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
-#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
-
-/* PCIe AXI slave table init defines */
-#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
-#define ATR_SIZE_SHIFT 1
-#define ATR_IMPL_ENABLE 1
-#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
-#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
-#define PCIE_TX_RX_INTERFACE 0x00000000u
-#define PCIE_CONFIG_INTERFACE 0x00000001u
-
-#define ATR_ENTRY_SIZE 32
-
/* PCIe Controller Phy Regs */
#define SEC_ERROR_EVENT_CNT 0x20
#define DED_ERROR_EVENT_CNT 0x24
@@ -179,20 +102,21 @@
#define EVENT_LOCAL_DMA_END_ENGINE_1 12
#define EVENT_LOCAL_DMA_ERROR_ENGINE_0 13
#define EVENT_LOCAL_DMA_ERROR_ENGINE_1 14
-#define EVENT_LOCAL_A_ATR_EVT_POST_ERR 15
-#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR 16
-#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR 17
-#define EVENT_LOCAL_A_ATR_EVT_DOORBELL 18
-#define EVENT_LOCAL_P_ATR_EVT_POST_ERR 19
-#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR 20
-#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR 21
-#define EVENT_LOCAL_P_ATR_EVT_DOORBELL 22
-#define EVENT_LOCAL_PM_MSI_INT_INTX 23
-#define EVENT_LOCAL_PM_MSI_INT_MSI 24
-#define EVENT_LOCAL_PM_MSI_INT_AER_EVT 25
-#define EVENT_LOCAL_PM_MSI_INT_EVENTS 26
-#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR 27
-#define NUM_EVENTS 28
+#define NUM_MC_EVENTS 15
+#define EVENT_LOCAL_A_ATR_EVT_POST_ERR (NUM_MC_EVENTS + EVENT_A_ATR_EVT_POST_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR (NUM_MC_EVENTS + EVENT_A_ATR_EVT_FETCH_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR (NUM_MC_EVENTS + EVENT_A_ATR_EVT_DISCARD_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_DOORBELL (NUM_MC_EVENTS + EVENT_A_ATR_EVT_DOORBELL)
+#define EVENT_LOCAL_P_ATR_EVT_POST_ERR (NUM_MC_EVENTS + EVENT_P_ATR_EVT_POST_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR (NUM_MC_EVENTS + EVENT_P_ATR_EVT_FETCH_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR (NUM_MC_EVENTS + EVENT_P_ATR_EVT_DISCARD_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_DOORBELL (NUM_MC_EVENTS + EVENT_P_ATR_EVT_DOORBELL)
+#define EVENT_LOCAL_PM_MSI_INT_INTX (NUM_MC_EVENTS + EVENT_PM_MSI_INT_INTX)
+#define EVENT_LOCAL_PM_MSI_INT_MSI (NUM_MC_EVENTS + EVENT_PM_MSI_INT_MSI)
+#define EVENT_LOCAL_PM_MSI_INT_AER_EVT (NUM_MC_EVENTS + EVENT_PM_MSI_INT_AER_EVT)
+#define EVENT_LOCAL_PM_MSI_INT_EVENTS (NUM_MC_EVENTS + EVENT_PM_MSI_INT_EVENTS)
+#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR (NUM_MC_EVENTS + EVENT_PM_MSI_INT_SYS_ERR)
+#define NUM_EVENTS (NUM_MC_EVENTS + NUM_PLDA_EVENTS)
#define PCIE_EVENT_CAUSE(x, s) \
[EVENT_PCIE_ ## x] = { __stringify(x), s }
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
new file mode 100644
index 000000000000..727fc54312c9
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PLDA PCIe host controller driver
+ */
+
+#ifndef _PCIE_PLDA_H
+#define _PCIE_PLDA_H
+
+/* PCIe Bridge Phy Regs */
+#define PCIE_PCI_IRQ_DW0 0xa8
+#define MSIX_CAP_MASK BIT(31)
+#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
+#define NUM_MSI_MSGS_SHIFT 4
+
+#define IMASK_LOCAL 0x180
+#define DMA_END_ENGINE_0_MASK 0x00000000u
+#define DMA_END_ENGINE_0_SHIFT 0
+#define DMA_END_ENGINE_1_MASK 0x00000000u
+#define DMA_END_ENGINE_1_SHIFT 1
+#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
+#define DMA_ERROR_ENGINE_0_SHIFT 8
+#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
+#define DMA_ERROR_ENGINE_1_SHIFT 9
+#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
+#define A_ATR_EVT_POST_ERR_SHIFT 16
+#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
+#define A_ATR_EVT_FETCH_ERR_SHIFT 17
+#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
+#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
+#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define A_ATR_EVT_DOORBELL_SHIFT 19
+#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
+#define P_ATR_EVT_POST_ERR_SHIFT 20
+#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
+#define P_ATR_EVT_FETCH_ERR_SHIFT 21
+#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
+#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
+#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define P_ATR_EVT_DOORBELL_SHIFT 23
+#define PM_MSI_INT_INTA_MASK 0x01000000u
+#define PM_MSI_INT_INTA_SHIFT 24
+#define PM_MSI_INT_INTB_MASK 0x02000000u
+#define PM_MSI_INT_INTB_SHIFT 25
+#define PM_MSI_INT_INTC_MASK 0x04000000u
+#define PM_MSI_INT_INTC_SHIFT 26
+#define PM_MSI_INT_INTD_MASK 0x08000000u
+#define PM_MSI_INT_INTD_SHIFT 27
+#define PM_MSI_INT_INTX_MASK 0x0f000000u
+#define PM_MSI_INT_INTX_SHIFT 24
+#define PM_MSI_INT_MSI_MASK 0x10000000u
+#define PM_MSI_INT_MSI_SHIFT 28
+#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
+#define PM_MSI_INT_AER_EVT_SHIFT 29
+#define PM_MSI_INT_EVENTS_MASK 0x40000000u
+#define PM_MSI_INT_EVENTS_SHIFT 30
+#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
+#define PM_MSI_INT_SYS_ERR_SHIFT 31
+#define NUM_LOCAL_EVENTS 15
+#define ISTATUS_LOCAL 0x184
+#define IMASK_HOST 0x188
+#define ISTATUS_HOST 0x18c
+#define IMSI_ADDR 0x190
+#define ISTATUS_MSI 0x194
+
+/* PCIe Master table init defines */
+#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
+#define ATR0_PCIE_ATR_SIZE 0x25
+#define ATR0_PCIE_ATR_SIZE_SHIFT 1
+#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
+#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
+
+/* PCIe AXI slave table init defines */
+#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
+#define ATR_SIZE_SHIFT 1
+#define ATR_IMPL_ENABLE 1
+#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
+#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
+#define PCIE_TX_RX_INTERFACE 0x00000000u
+#define PCIE_CONFIG_INTERFACE 0x00000001u
+
+#define ATR_ENTRY_SIZE 32
+
+#define EVENT_A_ATR_EVT_POST_ERR 0
+#define EVENT_A_ATR_EVT_FETCH_ERR 1
+#define EVENT_A_ATR_EVT_DISCARD_ERR 2
+#define EVENT_A_ATR_EVT_DOORBELL 3
+#define EVENT_P_ATR_EVT_POST_ERR 4
+#define EVENT_P_ATR_EVT_FETCH_ERR 5
+#define EVENT_P_ATR_EVT_DISCARD_ERR 6
+#define EVENT_P_ATR_EVT_DOORBELL 7
+#define EVENT_PM_MSI_INT_INTX 8
+#define EVENT_PM_MSI_INT_MSI 9
+#define EVENT_PM_MSI_INT_AER_EVT 10
+#define EVENT_PM_MSI_INT_EVENTS 11
+#define EVENT_PM_MSI_INT_SYS_ERR 12
+#define NUM_PLDA_EVENTS 13
+
+#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 03/20] PCI: microchip: Move PLDA IP register macros to pcie-plda.h
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move PLDA PCIe host controller IP registers macros to pcie-plda.h,
including bridge registers and local IRQ event number.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
MAINTAINERS | 8 ++
.../pci/controller/plda/pcie-microchip-host.c | 108 +++---------------
drivers/pci/controller/plda/pcie-plda.h | 102 +++++++++++++++++
3 files changed, 126 insertions(+), 92 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda.h
diff --git a/MAINTAINERS b/MAINTAINERS
index aaccaa89ff2d..4c08d9354dff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16612,6 +16612,14 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
F: drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
+PCI DRIVER FOR PLDA PCIE IP
+M: Daire McNamara <daire.mcnamara@microchip.com>
+M: Kevin Xie <kevin.xie@starfivetech.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/plda,*
+F: drivers/pci/controller/plda/*plda*
+
PCI DRIVER FOR RENESAS R-CAR
M: Marek Vasut <marek.vasut+renesas@gmail.com>
M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index cb09a8137e25..a34ec6aad4be 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include "../../pci.h"
+#include "pcie-plda.h"
/* Number of MSI IRQs */
#define MC_MAX_NUM_MSI_IRQS 32
@@ -30,84 +31,6 @@
#define MC_PCIE_BRIDGE_ADDR (MC_PCIE1_BRIDGE_ADDR)
#define MC_PCIE_CTRL_ADDR (MC_PCIE1_CTRL_ADDR)
-/* PCIe Bridge Phy Regs */
-#define PCIE_PCI_IRQ_DW0 0xa8
-#define MSIX_CAP_MASK BIT(31)
-#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
-#define NUM_MSI_MSGS_SHIFT 4
-
-#define IMASK_LOCAL 0x180
-#define DMA_END_ENGINE_0_MASK 0x00000000u
-#define DMA_END_ENGINE_0_SHIFT 0
-#define DMA_END_ENGINE_1_MASK 0x00000000u
-#define DMA_END_ENGINE_1_SHIFT 1
-#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
-#define DMA_ERROR_ENGINE_0_SHIFT 8
-#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
-#define DMA_ERROR_ENGINE_1_SHIFT 9
-#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
-#define A_ATR_EVT_POST_ERR_SHIFT 16
-#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
-#define A_ATR_EVT_FETCH_ERR_SHIFT 17
-#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
-#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
-#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define A_ATR_EVT_DOORBELL_SHIFT 19
-#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
-#define P_ATR_EVT_POST_ERR_SHIFT 20
-#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
-#define P_ATR_EVT_FETCH_ERR_SHIFT 21
-#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
-#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
-#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define P_ATR_EVT_DOORBELL_SHIFT 23
-#define PM_MSI_INT_INTA_MASK 0x01000000u
-#define PM_MSI_INT_INTA_SHIFT 24
-#define PM_MSI_INT_INTB_MASK 0x02000000u
-#define PM_MSI_INT_INTB_SHIFT 25
-#define PM_MSI_INT_INTC_MASK 0x04000000u
-#define PM_MSI_INT_INTC_SHIFT 26
-#define PM_MSI_INT_INTD_MASK 0x08000000u
-#define PM_MSI_INT_INTD_SHIFT 27
-#define PM_MSI_INT_INTX_MASK 0x0f000000u
-#define PM_MSI_INT_INTX_SHIFT 24
-#define PM_MSI_INT_MSI_MASK 0x10000000u
-#define PM_MSI_INT_MSI_SHIFT 28
-#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
-#define PM_MSI_INT_AER_EVT_SHIFT 29
-#define PM_MSI_INT_EVENTS_MASK 0x40000000u
-#define PM_MSI_INT_EVENTS_SHIFT 30
-#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
-#define PM_MSI_INT_SYS_ERR_SHIFT 31
-#define NUM_LOCAL_EVENTS 15
-#define ISTATUS_LOCAL 0x184
-#define IMASK_HOST 0x188
-#define ISTATUS_HOST 0x18c
-#define IMSI_ADDR 0x190
-#define ISTATUS_MSI 0x194
-
-/* PCIe Master table init defines */
-#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
-#define ATR0_PCIE_ATR_SIZE 0x25
-#define ATR0_PCIE_ATR_SIZE_SHIFT 1
-#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
-#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
-
-/* PCIe AXI slave table init defines */
-#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
-#define ATR_SIZE_SHIFT 1
-#define ATR_IMPL_ENABLE 1
-#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
-#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
-#define PCIE_TX_RX_INTERFACE 0x00000000u
-#define PCIE_CONFIG_INTERFACE 0x00000001u
-
-#define ATR_ENTRY_SIZE 32
-
/* PCIe Controller Phy Regs */
#define SEC_ERROR_EVENT_CNT 0x20
#define DED_ERROR_EVENT_CNT 0x24
@@ -179,20 +102,21 @@
#define EVENT_LOCAL_DMA_END_ENGINE_1 12
#define EVENT_LOCAL_DMA_ERROR_ENGINE_0 13
#define EVENT_LOCAL_DMA_ERROR_ENGINE_1 14
-#define EVENT_LOCAL_A_ATR_EVT_POST_ERR 15
-#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR 16
-#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR 17
-#define EVENT_LOCAL_A_ATR_EVT_DOORBELL 18
-#define EVENT_LOCAL_P_ATR_EVT_POST_ERR 19
-#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR 20
-#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR 21
-#define EVENT_LOCAL_P_ATR_EVT_DOORBELL 22
-#define EVENT_LOCAL_PM_MSI_INT_INTX 23
-#define EVENT_LOCAL_PM_MSI_INT_MSI 24
-#define EVENT_LOCAL_PM_MSI_INT_AER_EVT 25
-#define EVENT_LOCAL_PM_MSI_INT_EVENTS 26
-#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR 27
-#define NUM_EVENTS 28
+#define NUM_MC_EVENTS 15
+#define EVENT_LOCAL_A_ATR_EVT_POST_ERR (NUM_MC_EVENTS + EVENT_A_ATR_EVT_POST_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR (NUM_MC_EVENTS + EVENT_A_ATR_EVT_FETCH_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR (NUM_MC_EVENTS + EVENT_A_ATR_EVT_DISCARD_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_DOORBELL (NUM_MC_EVENTS + EVENT_A_ATR_EVT_DOORBELL)
+#define EVENT_LOCAL_P_ATR_EVT_POST_ERR (NUM_MC_EVENTS + EVENT_P_ATR_EVT_POST_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR (NUM_MC_EVENTS + EVENT_P_ATR_EVT_FETCH_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR (NUM_MC_EVENTS + EVENT_P_ATR_EVT_DISCARD_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_DOORBELL (NUM_MC_EVENTS + EVENT_P_ATR_EVT_DOORBELL)
+#define EVENT_LOCAL_PM_MSI_INT_INTX (NUM_MC_EVENTS + EVENT_PM_MSI_INT_INTX)
+#define EVENT_LOCAL_PM_MSI_INT_MSI (NUM_MC_EVENTS + EVENT_PM_MSI_INT_MSI)
+#define EVENT_LOCAL_PM_MSI_INT_AER_EVT (NUM_MC_EVENTS + EVENT_PM_MSI_INT_AER_EVT)
+#define EVENT_LOCAL_PM_MSI_INT_EVENTS (NUM_MC_EVENTS + EVENT_PM_MSI_INT_EVENTS)
+#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR (NUM_MC_EVENTS + EVENT_PM_MSI_INT_SYS_ERR)
+#define NUM_EVENTS (NUM_MC_EVENTS + NUM_PLDA_EVENTS)
#define PCIE_EVENT_CAUSE(x, s) \
[EVENT_PCIE_ ## x] = { __stringify(x), s }
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
new file mode 100644
index 000000000000..727fc54312c9
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PLDA PCIe host controller driver
+ */
+
+#ifndef _PCIE_PLDA_H
+#define _PCIE_PLDA_H
+
+/* PCIe Bridge Phy Regs */
+#define PCIE_PCI_IRQ_DW0 0xa8
+#define MSIX_CAP_MASK BIT(31)
+#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
+#define NUM_MSI_MSGS_SHIFT 4
+
+#define IMASK_LOCAL 0x180
+#define DMA_END_ENGINE_0_MASK 0x00000000u
+#define DMA_END_ENGINE_0_SHIFT 0
+#define DMA_END_ENGINE_1_MASK 0x00000000u
+#define DMA_END_ENGINE_1_SHIFT 1
+#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
+#define DMA_ERROR_ENGINE_0_SHIFT 8
+#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
+#define DMA_ERROR_ENGINE_1_SHIFT 9
+#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
+#define A_ATR_EVT_POST_ERR_SHIFT 16
+#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
+#define A_ATR_EVT_FETCH_ERR_SHIFT 17
+#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
+#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
+#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define A_ATR_EVT_DOORBELL_SHIFT 19
+#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
+#define P_ATR_EVT_POST_ERR_SHIFT 20
+#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
+#define P_ATR_EVT_FETCH_ERR_SHIFT 21
+#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
+#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
+#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define P_ATR_EVT_DOORBELL_SHIFT 23
+#define PM_MSI_INT_INTA_MASK 0x01000000u
+#define PM_MSI_INT_INTA_SHIFT 24
+#define PM_MSI_INT_INTB_MASK 0x02000000u
+#define PM_MSI_INT_INTB_SHIFT 25
+#define PM_MSI_INT_INTC_MASK 0x04000000u
+#define PM_MSI_INT_INTC_SHIFT 26
+#define PM_MSI_INT_INTD_MASK 0x08000000u
+#define PM_MSI_INT_INTD_SHIFT 27
+#define PM_MSI_INT_INTX_MASK 0x0f000000u
+#define PM_MSI_INT_INTX_SHIFT 24
+#define PM_MSI_INT_MSI_MASK 0x10000000u
+#define PM_MSI_INT_MSI_SHIFT 28
+#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
+#define PM_MSI_INT_AER_EVT_SHIFT 29
+#define PM_MSI_INT_EVENTS_MASK 0x40000000u
+#define PM_MSI_INT_EVENTS_SHIFT 30
+#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
+#define PM_MSI_INT_SYS_ERR_SHIFT 31
+#define NUM_LOCAL_EVENTS 15
+#define ISTATUS_LOCAL 0x184
+#define IMASK_HOST 0x188
+#define ISTATUS_HOST 0x18c
+#define IMSI_ADDR 0x190
+#define ISTATUS_MSI 0x194
+
+/* PCIe Master table init defines */
+#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
+#define ATR0_PCIE_ATR_SIZE 0x25
+#define ATR0_PCIE_ATR_SIZE_SHIFT 1
+#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
+#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
+
+/* PCIe AXI slave table init defines */
+#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
+#define ATR_SIZE_SHIFT 1
+#define ATR_IMPL_ENABLE 1
+#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
+#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
+#define PCIE_TX_RX_INTERFACE 0x00000000u
+#define PCIE_CONFIG_INTERFACE 0x00000001u
+
+#define ATR_ENTRY_SIZE 32
+
+#define EVENT_A_ATR_EVT_POST_ERR 0
+#define EVENT_A_ATR_EVT_FETCH_ERR 1
+#define EVENT_A_ATR_EVT_DISCARD_ERR 2
+#define EVENT_A_ATR_EVT_DOORBELL 3
+#define EVENT_P_ATR_EVT_POST_ERR 4
+#define EVENT_P_ATR_EVT_FETCH_ERR 5
+#define EVENT_P_ATR_EVT_DISCARD_ERR 6
+#define EVENT_P_ATR_EVT_DOORBELL 7
+#define EVENT_PM_MSI_INT_INTX 8
+#define EVENT_PM_MSI_INT_MSI 9
+#define EVENT_PM_MSI_INT_AER_EVT 10
+#define EVENT_PM_MSI_INT_EVENTS 11
+#define EVENT_PM_MSI_INT_SYS_ERR 12
+#define NUM_PLDA_EVENTS 13
+
+#endif
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 04/20] PCI: microchip: Add bridge_addr field to struct mc_pcie
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:48 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
For bridge address base is common PLDA field, Add this to struct mc_pcie
first.
INTx and MSI codes interrupts codes will get the bridge base address from
port->bridge_addr. These codes will be changed to common codes.
axi_base_addr is Microchip its own data.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 23 ++++++++-----------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index a34ec6aad4be..60870ee1f1c9 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -195,6 +195,7 @@ struct mc_pcie {
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct mc_msi msi;
+ void __iomem *bridge_addr;
};
struct cause {
@@ -339,8 +340,7 @@ static void mc_handle_msi(struct irq_desc *desc)
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
struct mc_msi *msi = &port->msi;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
int ret;
@@ -365,8 +365,7 @@ static void mc_handle_msi(struct irq_desc *desc)
static void mc_msi_bottom_irq_ack(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
u32 bitpos = data->hwirq;
writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
@@ -488,8 +487,7 @@ static void mc_handle_intx(struct irq_desc *desc)
struct mc_pcie *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
int ret;
@@ -514,8 +512,7 @@ static void mc_handle_intx(struct irq_desc *desc)
static void mc_ack_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
@@ -524,8 +521,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
static void mc_mask_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
u32 val;
@@ -540,8 +536,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
static void mc_unmask_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
u32 val;
@@ -896,8 +891,7 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
static int mc_pcie_setup_windows(struct platform_device *pdev,
struct mc_pcie *port)
{
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
struct resource_entry *entry;
u64 pci_addr;
@@ -1081,6 +1075,7 @@ static int mc_host_probe(struct platform_device *pdev)
mc_disable_interrupts(port);
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ port->bridge_addr = bridge_base_addr;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 04/20] PCI: microchip: Add bridge_addr field to struct mc_pcie
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
For bridge address base is common PLDA field, Add this to struct mc_pcie
first.
INTx and MSI codes interrupts codes will get the bridge base address from
port->bridge_addr. These codes will be changed to common codes.
axi_base_addr is Microchip its own data.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 23 ++++++++-----------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index a34ec6aad4be..60870ee1f1c9 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -195,6 +195,7 @@ struct mc_pcie {
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct mc_msi msi;
+ void __iomem *bridge_addr;
};
struct cause {
@@ -339,8 +340,7 @@ static void mc_handle_msi(struct irq_desc *desc)
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
struct mc_msi *msi = &port->msi;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
int ret;
@@ -365,8 +365,7 @@ static void mc_handle_msi(struct irq_desc *desc)
static void mc_msi_bottom_irq_ack(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
u32 bitpos = data->hwirq;
writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
@@ -488,8 +487,7 @@ static void mc_handle_intx(struct irq_desc *desc)
struct mc_pcie *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
int ret;
@@ -514,8 +512,7 @@ static void mc_handle_intx(struct irq_desc *desc)
static void mc_ack_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
@@ -524,8 +521,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
static void mc_mask_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
u32 val;
@@ -540,8 +536,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
static void mc_unmask_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
u32 val;
@@ -896,8 +891,7 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
static int mc_pcie_setup_windows(struct platform_device *pdev,
struct mc_pcie *port)
{
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
struct resource_entry *entry;
u64 pci_addr;
@@ -1081,6 +1075,7 @@ static int mc_host_probe(struct platform_device *pdev)
mc_disable_interrupts(port);
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ port->bridge_addr = bridge_base_addr;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 05/20] PCI: microchip: Rename two PCIe data structures
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:48 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add PLDA PCIe related data structures by rename data structure name from
mc_* to plda_*.
axi_base_addr is stayed in struct mc_pcie for it's microchip its own data.
The event interrupt codes is still using struct mc_pcie because the event
interrupt codes can not be re-used.
The modification includes:
mc_pcie --> plda_pcie_rp (Get most of data members)
mc_msi --> plda_msi
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 96 ++++++++++---------
1 file changed, 53 insertions(+), 43 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 60870ee1f1c9..3dc4d4ca9d0c 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -22,7 +22,7 @@
#include "pcie-plda.h"
/* Number of MSI IRQs */
-#define MC_MAX_NUM_MSI_IRQS 32
+#define PLDA_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
@@ -179,25 +179,29 @@ struct event_map {
u32 event_bit;
};
-struct mc_msi {
+struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
struct irq_domain *dev_domain;
u32 num_vectors;
u64 vector_phy;
- DECLARE_BITMAP(used, MC_MAX_NUM_MSI_IRQS);
+ DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
};
-struct mc_pcie {
- void __iomem *axi_base_addr;
+struct plda_pcie_rp {
struct device *dev;
struct irq_domain *intx_domain;
struct irq_domain *event_domain;
raw_spinlock_t lock;
- struct mc_msi msi;
+ struct plda_msi msi;
void __iomem *bridge_addr;
};
+struct mc_pcie {
+ struct plda_pcie_rp plda;
+ void __iomem *axi_base_addr;
+};
+
struct cause {
const char *sym;
const char *str;
@@ -313,7 +317,7 @@ static struct mc_pcie *port;
static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
{
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->plda.msi;
u16 reg;
u8 queue_size;
@@ -336,10 +340,10 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
static void mc_handle_msi(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->msi;
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
@@ -364,7 +368,7 @@ static void mc_handle_msi(struct irq_desc *desc)
static void mc_msi_bottom_irq_ack(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
u32 bitpos = data->hwirq;
@@ -373,7 +377,7 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data)
static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
phys_addr_t addr = port->msi.vector_phy;
msg->address_lo = lower_32_bits(addr);
@@ -400,8 +404,8 @@ static struct irq_chip mc_msi_bottom_irq_chip = {
static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *args)
{
- struct mc_pcie *port = domain->host_data;
- struct mc_msi *msi = &port->msi;
+ struct plda_pcie_rp *port = domain->host_data;
+ struct plda_msi *msi = &port->msi;
unsigned long bit;
mutex_lock(&msi->lock);
@@ -425,8 +429,8 @@ static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
- struct mc_pcie *port = irq_data_get_irq_chip_data(d);
- struct mc_msi *msi = &port->msi;
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
+ struct plda_msi *msi = &port->msi;
mutex_lock(&msi->lock);
@@ -456,11 +460,11 @@ static struct msi_domain_info mc_msi_domain_info = {
.chip = &mc_msi_irq_chip,
};
-static int mc_allocate_msi_domains(struct mc_pcie *port)
+static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->msi;
mutex_init(&port->msi.lock);
@@ -484,7 +488,7 @@ static int mc_allocate_msi_domains(struct mc_pcie *port)
static void mc_handle_intx(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -511,7 +515,7 @@ static void mc_handle_intx(struct irq_desc *desc)
static void mc_ack_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -520,7 +524,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
static void mc_mask_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -535,7 +539,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
static void mc_unmask_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -625,21 +629,22 @@ static u32 local_events(struct mc_pcie *port)
return val;
}
-static u32 get_events(struct mc_pcie *port)
+static u32 get_events(struct plda_pcie_rp *port)
{
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 events = 0;
- events |= pcie_events(port);
- events |= sec_errors(port);
- events |= ded_errors(port);
- events |= local_events(port);
+ events |= pcie_events(mc_port);
+ events |= sec_errors(mc_port);
+ events |= ded_errors(mc_port);
+ events |= local_events(mc_port);
return events;
}
static irqreturn_t mc_event_handler(int irq, void *dev_id)
{
- struct mc_pcie *port = dev_id;
+ struct plda_pcie_rp *port = dev_id;
struct device *dev = port->dev;
struct irq_data *data;
@@ -655,7 +660,7 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
static void mc_handle_event(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
unsigned long events;
u32 bit;
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -672,12 +677,13 @@ static void mc_handle_event(struct irq_desc *desc)
static void mc_ack_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].offset;
mask = event_descs[event].mask;
mask |= event_descs[event].enb_mask;
@@ -687,13 +693,14 @@ static void mc_ack_event_irq(struct irq_data *data)
static void mc_mask_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
u32 val;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].mask_offset;
mask = event_descs[event].mask;
if (event_descs[event].enb_mask) {
@@ -717,13 +724,14 @@ static void mc_mask_event_irq(struct irq_data *data)
static void mc_unmask_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
u32 val;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].mask_offset;
mask = event_descs[event].mask;
@@ -811,7 +819,7 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
-static int mc_pcie_init_irq_domains(struct mc_pcie *port)
+static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -889,7 +897,7 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
}
static int mc_pcie_setup_windows(struct platform_device *pdev,
- struct mc_pcie *port)
+ struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
@@ -970,7 +978,7 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int mc_init_interrupts(struct platform_device *pdev, struct mc_pcie *port)
+static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
{
struct device *dev = &pdev->dev;
int irq;
@@ -1043,12 +1051,12 @@ static int mc_platform_init(struct pci_config_window *cfg)
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = mc_pcie_setup_windows(pdev, port);
+ ret = mc_pcie_setup_windows(pdev, &port->plda);
if (ret)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = mc_init_interrupts(pdev, port);
+ ret = mc_init_interrupts(pdev, &port->plda);
if (ret)
return ret;
@@ -1059,6 +1067,7 @@ static int mc_host_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
void __iomem *bridge_base_addr;
+ struct plda_pcie_rp *plda;
int ret;
u32 val;
@@ -1066,7 +1075,8 @@ static int mc_host_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;
- port->dev = dev;
+ plda = &port->plda;
+ plda->dev = dev;
port->axi_base_addr = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(port->axi_base_addr))
@@ -1075,7 +1085,7 @@ static int mc_host_probe(struct platform_device *pdev)
mc_disable_interrupts(port);
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
- port->bridge_addr = bridge_base_addr;
+ plda->bridge_addr = bridge_base_addr;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
@@ -1087,10 +1097,10 @@ static int mc_host_probe(struct platform_device *pdev)
val &= NUM_MSI_MSGS_MASK;
val >>= NUM_MSI_MSGS_SHIFT;
- port->msi.num_vectors = 1 << val;
+ plda->msi.num_vectors = 1 << val;
/* Pick vector address from design */
- port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
+ plda->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
ret = mc_pcie_init_clks(dev);
if (ret) {
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 05/20] PCI: microchip: Rename two PCIe data structures
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add PLDA PCIe related data structures by rename data structure name from
mc_* to plda_*.
axi_base_addr is stayed in struct mc_pcie for it's microchip its own data.
The event interrupt codes is still using struct mc_pcie because the event
interrupt codes can not be re-used.
The modification includes:
mc_pcie --> plda_pcie_rp (Get most of data members)
mc_msi --> plda_msi
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 96 ++++++++++---------
1 file changed, 53 insertions(+), 43 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 60870ee1f1c9..3dc4d4ca9d0c 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -22,7 +22,7 @@
#include "pcie-plda.h"
/* Number of MSI IRQs */
-#define MC_MAX_NUM_MSI_IRQS 32
+#define PLDA_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
@@ -179,25 +179,29 @@ struct event_map {
u32 event_bit;
};
-struct mc_msi {
+struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
struct irq_domain *dev_domain;
u32 num_vectors;
u64 vector_phy;
- DECLARE_BITMAP(used, MC_MAX_NUM_MSI_IRQS);
+ DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
};
-struct mc_pcie {
- void __iomem *axi_base_addr;
+struct plda_pcie_rp {
struct device *dev;
struct irq_domain *intx_domain;
struct irq_domain *event_domain;
raw_spinlock_t lock;
- struct mc_msi msi;
+ struct plda_msi msi;
void __iomem *bridge_addr;
};
+struct mc_pcie {
+ struct plda_pcie_rp plda;
+ void __iomem *axi_base_addr;
+};
+
struct cause {
const char *sym;
const char *str;
@@ -313,7 +317,7 @@ static struct mc_pcie *port;
static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
{
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->plda.msi;
u16 reg;
u8 queue_size;
@@ -336,10 +340,10 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
static void mc_handle_msi(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->msi;
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
@@ -364,7 +368,7 @@ static void mc_handle_msi(struct irq_desc *desc)
static void mc_msi_bottom_irq_ack(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
u32 bitpos = data->hwirq;
@@ -373,7 +377,7 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data)
static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
phys_addr_t addr = port->msi.vector_phy;
msg->address_lo = lower_32_bits(addr);
@@ -400,8 +404,8 @@ static struct irq_chip mc_msi_bottom_irq_chip = {
static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *args)
{
- struct mc_pcie *port = domain->host_data;
- struct mc_msi *msi = &port->msi;
+ struct plda_pcie_rp *port = domain->host_data;
+ struct plda_msi *msi = &port->msi;
unsigned long bit;
mutex_lock(&msi->lock);
@@ -425,8 +429,8 @@ static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
- struct mc_pcie *port = irq_data_get_irq_chip_data(d);
- struct mc_msi *msi = &port->msi;
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
+ struct plda_msi *msi = &port->msi;
mutex_lock(&msi->lock);
@@ -456,11 +460,11 @@ static struct msi_domain_info mc_msi_domain_info = {
.chip = &mc_msi_irq_chip,
};
-static int mc_allocate_msi_domains(struct mc_pcie *port)
+static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->msi;
mutex_init(&port->msi.lock);
@@ -484,7 +488,7 @@ static int mc_allocate_msi_domains(struct mc_pcie *port)
static void mc_handle_intx(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -511,7 +515,7 @@ static void mc_handle_intx(struct irq_desc *desc)
static void mc_ack_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -520,7 +524,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
static void mc_mask_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -535,7 +539,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
static void mc_unmask_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -625,21 +629,22 @@ static u32 local_events(struct mc_pcie *port)
return val;
}
-static u32 get_events(struct mc_pcie *port)
+static u32 get_events(struct plda_pcie_rp *port)
{
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 events = 0;
- events |= pcie_events(port);
- events |= sec_errors(port);
- events |= ded_errors(port);
- events |= local_events(port);
+ events |= pcie_events(mc_port);
+ events |= sec_errors(mc_port);
+ events |= ded_errors(mc_port);
+ events |= local_events(mc_port);
return events;
}
static irqreturn_t mc_event_handler(int irq, void *dev_id)
{
- struct mc_pcie *port = dev_id;
+ struct plda_pcie_rp *port = dev_id;
struct device *dev = port->dev;
struct irq_data *data;
@@ -655,7 +660,7 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
static void mc_handle_event(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
unsigned long events;
u32 bit;
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -672,12 +677,13 @@ static void mc_handle_event(struct irq_desc *desc)
static void mc_ack_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].offset;
mask = event_descs[event].mask;
mask |= event_descs[event].enb_mask;
@@ -687,13 +693,14 @@ static void mc_ack_event_irq(struct irq_data *data)
static void mc_mask_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
u32 val;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].mask_offset;
mask = event_descs[event].mask;
if (event_descs[event].enb_mask) {
@@ -717,13 +724,14 @@ static void mc_mask_event_irq(struct irq_data *data)
static void mc_unmask_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
u32 val;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].mask_offset;
mask = event_descs[event].mask;
@@ -811,7 +819,7 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
-static int mc_pcie_init_irq_domains(struct mc_pcie *port)
+static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -889,7 +897,7 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
}
static int mc_pcie_setup_windows(struct platform_device *pdev,
- struct mc_pcie *port)
+ struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
@@ -970,7 +978,7 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int mc_init_interrupts(struct platform_device *pdev, struct mc_pcie *port)
+static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
{
struct device *dev = &pdev->dev;
int irq;
@@ -1043,12 +1051,12 @@ static int mc_platform_init(struct pci_config_window *cfg)
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = mc_pcie_setup_windows(pdev, port);
+ ret = mc_pcie_setup_windows(pdev, &port->plda);
if (ret)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = mc_init_interrupts(pdev, port);
+ ret = mc_init_interrupts(pdev, &port->plda);
if (ret)
return ret;
@@ -1059,6 +1067,7 @@ static int mc_host_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
void __iomem *bridge_base_addr;
+ struct plda_pcie_rp *plda;
int ret;
u32 val;
@@ -1066,7 +1075,8 @@ static int mc_host_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;
- port->dev = dev;
+ plda = &port->plda;
+ plda->dev = dev;
port->axi_base_addr = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(port->axi_base_addr))
@@ -1075,7 +1085,7 @@ static int mc_host_probe(struct platform_device *pdev)
mc_disable_interrupts(port);
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
- port->bridge_addr = bridge_base_addr;
+ plda->bridge_addr = bridge_base_addr;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
@@ -1087,10 +1097,10 @@ static int mc_host_probe(struct platform_device *pdev)
val &= NUM_MSI_MSGS_MASK;
val >>= NUM_MSI_MSGS_SHIFT;
- port->msi.num_vectors = 1 << val;
+ plda->msi.num_vectors = 1 << val;
/* Pick vector address from design */
- port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
+ plda->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
ret = mc_pcie_init_clks(dev);
if (ret) {
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 06/20] PCI: microchip: Move PCIe host data structures to plda-pcie.h
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:48 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move the common data structures definition to head file for these two data
structures can be re-used.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 20 ------------------
drivers/pci/controller/plda/pcie-plda.h | 21 +++++++++++++++++++
2 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 3dc4d4ca9d0c..261147a0a446 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -21,9 +21,6 @@
#include "../../pci.h"
#include "pcie-plda.h"
-/* Number of MSI IRQs */
-#define PLDA_MAX_NUM_MSI_IRQS 32
-
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
#define MC_PCIE1_CTRL_ADDR 0x0000a000u
@@ -179,23 +176,6 @@ struct event_map {
u32 event_bit;
};
-struct plda_msi {
- struct mutex lock; /* Protect used bitmap */
- struct irq_domain *msi_domain;
- struct irq_domain *dev_domain;
- u32 num_vectors;
- u64 vector_phy;
- DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
-};
-
-struct plda_pcie_rp {
- struct device *dev;
- struct irq_domain *intx_domain;
- struct irq_domain *event_domain;
- raw_spinlock_t lock;
- struct plda_msi msi;
- void __iomem *bridge_addr;
-};
struct mc_pcie {
struct plda_pcie_rp plda;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 727fc54312c9..363fcbbaf6ec 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -6,6 +6,9 @@
#ifndef _PCIE_PLDA_H
#define _PCIE_PLDA_H
+/* Number of MSI IRQs */
+#define PLDA_MAX_NUM_MSI_IRQS 32
+
/* PCIe Bridge Phy Regs */
#define PCIE_PCI_IRQ_DW0 0xa8
#define MSIX_CAP_MASK BIT(31)
@@ -99,4 +102,22 @@
#define EVENT_PM_MSI_INT_SYS_ERR 12
#define NUM_PLDA_EVENTS 13
+struct plda_msi {
+ struct mutex lock; /* Protect used bitmap */
+ struct irq_domain *msi_domain;
+ struct irq_domain *dev_domain;
+ u32 num_vectors;
+ u64 vector_phy;
+ DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
+};
+
+struct plda_pcie_rp {
+ struct device *dev;
+ struct irq_domain *intx_domain;
+ struct irq_domain *event_domain;
+ raw_spinlock_t lock;
+ struct plda_msi msi;
+ void __iomem *bridge_addr;
+};
+
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 06/20] PCI: microchip: Move PCIe host data structures to plda-pcie.h
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move the common data structures definition to head file for these two data
structures can be re-used.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 20 ------------------
drivers/pci/controller/plda/pcie-plda.h | 21 +++++++++++++++++++
2 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 3dc4d4ca9d0c..261147a0a446 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -21,9 +21,6 @@
#include "../../pci.h"
#include "pcie-plda.h"
-/* Number of MSI IRQs */
-#define PLDA_MAX_NUM_MSI_IRQS 32
-
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
#define MC_PCIE1_CTRL_ADDR 0x0000a000u
@@ -179,23 +176,6 @@ struct event_map {
u32 event_bit;
};
-struct plda_msi {
- struct mutex lock; /* Protect used bitmap */
- struct irq_domain *msi_domain;
- struct irq_domain *dev_domain;
- u32 num_vectors;
- u64 vector_phy;
- DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
-};
-
-struct plda_pcie_rp {
- struct device *dev;
- struct irq_domain *intx_domain;
- struct irq_domain *event_domain;
- raw_spinlock_t lock;
- struct plda_msi msi;
- void __iomem *bridge_addr;
-};
struct mc_pcie {
struct plda_pcie_rp plda;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 727fc54312c9..363fcbbaf6ec 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -6,6 +6,9 @@
#ifndef _PCIE_PLDA_H
#define _PCIE_PLDA_H
+/* Number of MSI IRQs */
+#define PLDA_MAX_NUM_MSI_IRQS 32
+
/* PCIe Bridge Phy Regs */
#define PCIE_PCI_IRQ_DW0 0xa8
#define MSIX_CAP_MASK BIT(31)
@@ -99,4 +102,22 @@
#define EVENT_PM_MSI_INT_SYS_ERR 12
#define NUM_PLDA_EVENTS 13
+struct plda_msi {
+ struct mutex lock; /* Protect used bitmap */
+ struct irq_domain *msi_domain;
+ struct irq_domain *dev_domain;
+ u32 num_vectors;
+ u64 vector_phy;
+ DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
+};
+
+struct plda_pcie_rp {
+ struct device *dev;
+ struct irq_domain *intx_domain;
+ struct irq_domain *event_domain;
+ raw_spinlock_t lock;
+ struct plda_msi msi;
+ void __iomem *bridge_addr;
+};
+
#endif
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 07/20] PCI: microchip: Rename two setup functions
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:48 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Rename two setup functions to plda prefix. Prepare to re-use these two
setup function.
For two setup functions names are similar, rename mc_pcie_setup_windows()
to plda_pcie_setup_iomems().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 24 +++++++++----------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 261147a0a446..4877d130ee4c 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,9 +838,9 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
+static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
{
u32 atr_sz = ilog2(size) - 1;
u32 val;
@@ -876,8 +876,8 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
-static int mc_pcie_setup_windows(struct platform_device *pdev,
- struct plda_pcie_rp *port)
+static int plda_pcie_setup_iomems(struct platform_device *pdev,
+ struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
@@ -888,9 +888,9 @@ static int mc_pcie_setup_windows(struct platform_device *pdev,
resource_list_for_each_entry(entry, &bridge->windows) {
if (resource_type(entry->res) == IORESOURCE_MEM) {
pci_addr = entry->res->start - entry->offset;
- mc_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
index++;
}
}
@@ -1023,15 +1023,15 @@ static int mc_platform_init(struct pci_config_window *cfg)
int ret;
/* Configure address translation table 0 for PCIe config space */
- mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
- cfg->res.start,
- resource_size(&cfg->res));
+ plda_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
+ cfg->res.start,
+ resource_size(&cfg->res));
/* Need some fixups in config space */
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = mc_pcie_setup_windows(pdev, &port->plda);
+ ret = plda_pcie_setup_iomems(pdev, &port->plda);
if (ret)
return ret;
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 07/20] PCI: microchip: Rename two setup functions
@ 2023-11-15 11:48 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:48 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Rename two setup functions to plda prefix. Prepare to re-use these two
setup function.
For two setup functions names are similar, rename mc_pcie_setup_windows()
to plda_pcie_setup_iomems().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 24 +++++++++----------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 261147a0a446..4877d130ee4c 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,9 +838,9 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
+static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
{
u32 atr_sz = ilog2(size) - 1;
u32 val;
@@ -876,8 +876,8 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
-static int mc_pcie_setup_windows(struct platform_device *pdev,
- struct plda_pcie_rp *port)
+static int plda_pcie_setup_iomems(struct platform_device *pdev,
+ struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
@@ -888,9 +888,9 @@ static int mc_pcie_setup_windows(struct platform_device *pdev,
resource_list_for_each_entry(entry, &bridge->windows) {
if (resource_type(entry->res) == IORESOURCE_MEM) {
pci_addr = entry->res->start - entry->offset;
- mc_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
index++;
}
}
@@ -1023,15 +1023,15 @@ static int mc_platform_init(struct pci_config_window *cfg)
int ret;
/* Configure address translation table 0 for PCIe config space */
- mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
- cfg->res.start,
- resource_size(&cfg->res));
+ plda_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
+ cfg->res.start,
+ resource_size(&cfg->res));
/* Need some fixups in config space */
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = mc_pcie_setup_windows(pdev, &port->plda);
+ ret = plda_pcie_setup_iomems(pdev, &port->plda);
if (ret)
return ret;
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 08/20] PCI: microchip: Change the argument of plda_pcie_setup_iomems()
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
If other vendor do not select PCI_HOST_COMMON, the driver data is not
struct pci_host_bridge.
Move calling platform_get_drvdata() to mc_platform_init().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 4877d130ee4c..31ca8d44ee2a 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
-static int plda_pcie_setup_iomems(struct platform_device *pdev,
+static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
- struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
struct resource_entry *entry;
u64 pci_addr;
u32 index = 1;
@@ -1018,6 +1017,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
struct platform_device *pdev = to_platform_device(dev);
+ struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
void __iomem *bridge_base_addr =
port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
int ret;
@@ -1031,7 +1031,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = plda_pcie_setup_iomems(pdev, &port->plda);
+ ret = plda_pcie_setup_iomems(bridge, &port->plda);
if (ret)
return ret;
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 08/20] PCI: microchip: Change the argument of plda_pcie_setup_iomems()
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
If other vendor do not select PCI_HOST_COMMON, the driver data is not
struct pci_host_bridge.
Move calling platform_get_drvdata() to mc_platform_init().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 4877d130ee4c..31ca8d44ee2a 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
-static int plda_pcie_setup_iomems(struct platform_device *pdev,
+static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
- struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
struct resource_entry *entry;
u64 pci_addr;
u32 index = 1;
@@ -1018,6 +1017,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
struct platform_device *pdev = to_platform_device(dev);
+ struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
void __iomem *bridge_base_addr =
port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
int ret;
@@ -1031,7 +1031,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = plda_pcie_setup_iomems(pdev, &port->plda);
+ ret = plda_pcie_setup_iomems(bridge, &port->plda);
if (ret)
return ret;
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 09/20] PCI: microchip: Move setup functions to pcie-plda-host.c
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move setup functions to common pcie-plda-host.c. So these two functions
can be re-used.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/Kconfig | 4 +
drivers/pci/controller/plda/Makefile | 1 +
.../pci/controller/plda/pcie-microchip-host.c | 59 --------------
drivers/pci/controller/plda/pcie-plda-host.c | 80 +++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 5 ++
5 files changed, 90 insertions(+), 59 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index 5cb3be4fc98c..e54a82ee94f5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -3,10 +3,14 @@
menu "PLDA-based PCIe controllers"
depends on PCI
+config PCIE_PLDA_HOST
+ bool
+
config PCIE_MICROCHIP_HOST
tristate "Microchip AXI PCIe controller"
depends on PCI_MSI && OF
select PCI_HOST_COMMON
+ select PCIE_PLDA_HOST
help
Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver.
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index e1a265cbf91c..4340ab007f44 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 31ca8d44ee2a..2e79bcc7c0a5 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
-{
- u32 atr_sz = ilog2(size) - 1;
- u32 val;
-
- if (index == 0)
- val = PCIE_CONFIG_INTERFACE;
- else
- val = PCIE_TX_RX_INTERFACE;
-
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_PARAM);
-
- val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
- ATR_IMPL_ENABLE;
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRCADDR_PARAM);
-
- val = upper_32_bits(axi_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRC_ADDR);
-
- val = lower_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
-
- val = upper_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
-
- val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
- writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
-}
-
-static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
- struct plda_pcie_rp *port)
-{
- void __iomem *bridge_base_addr = port->bridge_addr;
- struct resource_entry *entry;
- u64 pci_addr;
- u32 index = 1;
-
- resource_list_for_each_entry(entry, &bridge->windows) {
- if (resource_type(entry->res) == IORESOURCE_MEM) {
- pci_addr = entry->res->start - entry->offset;
- plda_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
- index++;
- }
- }
-
- return 0;
-}
-
static inline void mc_clear_secs(struct mc_pcie *port)
{
void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
new file mode 100644
index 000000000000..19131181897f
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PLDA PCIe XpressRich host controller driver
+ *
+ * Copyright (C) 2023 Microchip Co. Ltd
+ *
+ * Author: Daire McNamara <daire.mcnamara@microchip.com>
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci_regs.h>
+#include <linux/pci-ecam.h>
+#include <linux/platform_device.h>
+
+#include "pcie-plda.h"
+
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
+{
+ u32 atr_sz = ilog2(size) - 1;
+ u32 val;
+
+ if (index == 0)
+ val = PCIE_CONFIG_INTERFACE;
+ else
+ val = PCIE_TX_RX_INTERFACE;
+
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_PARAM);
+
+ val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
+ ATR_IMPL_ENABLE;
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+ val = upper_32_bits(axi_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRC_ADDR);
+
+ val = lower_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+ val = upper_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
+
+ val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+ writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
+
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port)
+{
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ struct resource_entry *entry;
+ u64 pci_addr;
+ u32 index = 1;
+
+ resource_list_for_each_entry(entry, &bridge->windows) {
+ if (resource_type(entry->res) == IORESOURCE_MEM) {
+ pci_addr = entry->res->start - entry->offset;
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
+ index++;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 363fcbbaf6ec..3deefd35fa5a 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -120,4 +120,9 @@ struct plda_pcie_rp {
void __iomem *bridge_addr;
};
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size);
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port);
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 09/20] PCI: microchip: Move setup functions to pcie-plda-host.c
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move setup functions to common pcie-plda-host.c. So these two functions
can be re-used.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/Kconfig | 4 +
drivers/pci/controller/plda/Makefile | 1 +
.../pci/controller/plda/pcie-microchip-host.c | 59 --------------
drivers/pci/controller/plda/pcie-plda-host.c | 80 +++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 5 ++
5 files changed, 90 insertions(+), 59 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index 5cb3be4fc98c..e54a82ee94f5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -3,10 +3,14 @@
menu "PLDA-based PCIe controllers"
depends on PCI
+config PCIE_PLDA_HOST
+ bool
+
config PCIE_MICROCHIP_HOST
tristate "Microchip AXI PCIe controller"
depends on PCI_MSI && OF
select PCI_HOST_COMMON
+ select PCIE_PLDA_HOST
help
Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver.
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index e1a265cbf91c..4340ab007f44 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 31ca8d44ee2a..2e79bcc7c0a5 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
-{
- u32 atr_sz = ilog2(size) - 1;
- u32 val;
-
- if (index == 0)
- val = PCIE_CONFIG_INTERFACE;
- else
- val = PCIE_TX_RX_INTERFACE;
-
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_PARAM);
-
- val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
- ATR_IMPL_ENABLE;
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRCADDR_PARAM);
-
- val = upper_32_bits(axi_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRC_ADDR);
-
- val = lower_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
-
- val = upper_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
-
- val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
- writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
-}
-
-static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
- struct plda_pcie_rp *port)
-{
- void __iomem *bridge_base_addr = port->bridge_addr;
- struct resource_entry *entry;
- u64 pci_addr;
- u32 index = 1;
-
- resource_list_for_each_entry(entry, &bridge->windows) {
- if (resource_type(entry->res) == IORESOURCE_MEM) {
- pci_addr = entry->res->start - entry->offset;
- plda_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
- index++;
- }
- }
-
- return 0;
-}
-
static inline void mc_clear_secs(struct mc_pcie *port)
{
void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
new file mode 100644
index 000000000000..19131181897f
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PLDA PCIe XpressRich host controller driver
+ *
+ * Copyright (C) 2023 Microchip Co. Ltd
+ *
+ * Author: Daire McNamara <daire.mcnamara@microchip.com>
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci_regs.h>
+#include <linux/pci-ecam.h>
+#include <linux/platform_device.h>
+
+#include "pcie-plda.h"
+
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
+{
+ u32 atr_sz = ilog2(size) - 1;
+ u32 val;
+
+ if (index == 0)
+ val = PCIE_CONFIG_INTERFACE;
+ else
+ val = PCIE_TX_RX_INTERFACE;
+
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_PARAM);
+
+ val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
+ ATR_IMPL_ENABLE;
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+ val = upper_32_bits(axi_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRC_ADDR);
+
+ val = lower_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+ val = upper_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
+
+ val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+ writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
+
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port)
+{
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ struct resource_entry *entry;
+ u64 pci_addr;
+ u32 index = 1;
+
+ resource_list_for_each_entry(entry, &bridge->windows) {
+ if (resource_type(entry->res) == IORESOURCE_MEM) {
+ pci_addr = entry->res->start - entry->offset;
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
+ index++;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 363fcbbaf6ec..3deefd35fa5a 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -120,4 +120,9 @@ struct plda_pcie_rp {
void __iomem *bridge_addr;
};
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size);
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port);
#endif
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 10/20] PCI: microchip: Rename interrupt related functions
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Rename mc_* to plda_* for IRQ functions and related IRQ domain ops data
instances.
MSI, INTx interrupt codes and IRQ init codes are all can be re-used.
- function rename list:
mc_allocate_msi_domains() --> plda_allocate_msi_domains()
mc_init_interrupts() --> plda_init_interrupts()
mc_pcie_init_irq_domain() --> plda_pcie_init_irq_domains()
mc_handle_event() --> plda_handle_event()
get_events() --> mc_get_events()
MSI interrupts related functions and IRQ domain
(primary function is mc_handle_msi()):
mc_handle_msi() --> plda_handle_msi()
INTx interrupts related functions and IRQ domain
(primary function is mc_handle_intx()):
mc_handle_intx() --> plda_handle_intx()
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 105 +++++++++---------
1 file changed, 55 insertions(+), 50 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 2e79bcc7c0a5..54a0d431a471 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -318,7 +318,7 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
-static void mc_handle_msi(struct irq_desc *desc)
+static void plda_handle_msi(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -333,7 +333,8 @@ static void mc_handle_msi(struct irq_desc *desc)
status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
if (status & PM_MSI_INT_MSI_MASK) {
- writel_relaxed(status & PM_MSI_INT_MSI_MASK, bridge_base_addr + ISTATUS_LOCAL);
+ writel_relaxed(status & PM_MSI_INT_MSI_MASK,
+ bridge_base_addr + ISTATUS_LOCAL);
status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
for_each_set_bit(bit, &status, msi->num_vectors) {
ret = generic_handle_domain_irq(msi->dev_domain, bit);
@@ -346,7 +347,7 @@ static void mc_handle_msi(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void mc_msi_bottom_irq_ack(struct irq_data *data)
+static void plda_msi_bottom_irq_ack(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -355,7 +356,7 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data)
writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
}
-static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
phys_addr_t addr = port->msi.vector_phy;
@@ -368,21 +369,23 @@ static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
(int)data->hwirq, msg->address_hi, msg->address_lo);
}
-static int mc_msi_set_affinity(struct irq_data *irq_data,
- const struct cpumask *mask, bool force)
+static int plda_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
{
return -EINVAL;
}
-static struct irq_chip mc_msi_bottom_irq_chip = {
- .name = "Microchip MSI",
- .irq_ack = mc_msi_bottom_irq_ack,
- .irq_compose_msi_msg = mc_compose_msi_msg,
- .irq_set_affinity = mc_msi_set_affinity,
+static struct irq_chip plda_msi_bottom_irq_chip = {
+ .name = "PLDA MSI",
+ .irq_ack = plda_msi_bottom_irq_ack,
+ .irq_compose_msi_msg = plda_compose_msi_msg,
+ .irq_set_affinity = plda_msi_set_affinity,
};
-static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
- unsigned int nr_irqs, void *args)
+static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs,
+ void *args)
{
struct plda_pcie_rp *port = domain->host_data;
struct plda_msi *msi = &port->msi;
@@ -397,7 +400,7 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
set_bit(bit, msi->used);
- irq_domain_set_info(domain, virq, bit, &mc_msi_bottom_irq_chip,
+ irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
domain->host_data, handle_edge_irq, NULL, NULL);
mutex_unlock(&msi->lock);
@@ -405,8 +408,9 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
return 0;
}
-static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
- unsigned int nr_irqs)
+static void plda_irq_msi_domain_free(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
@@ -423,24 +427,24 @@ static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
}
static const struct irq_domain_ops msi_domain_ops = {
- .alloc = mc_irq_msi_domain_alloc,
- .free = mc_irq_msi_domain_free,
+ .alloc = plda_irq_msi_domain_alloc,
+ .free = plda_irq_msi_domain_free,
};
-static struct irq_chip mc_msi_irq_chip = {
- .name = "Microchip PCIe MSI",
+static struct irq_chip plda_msi_irq_chip = {
+ .name = "PLDA PCIe MSI",
.irq_ack = irq_chip_ack_parent,
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,
};
-static struct msi_domain_info mc_msi_domain_info = {
+static struct msi_domain_info plda_msi_domain_info = {
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
MSI_FLAG_PCI_MSIX),
- .chip = &mc_msi_irq_chip,
+ .chip = &plda_msi_irq_chip,
};
-static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
+static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
@@ -455,7 +459,8 @@ static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
return -ENOMEM;
}
- msi->msi_domain = pci_msi_create_irq_domain(fwnode, &mc_msi_domain_info,
+ msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+ &plda_msi_domain_info,
msi->dev_domain);
if (!msi->msi_domain) {
dev_err(dev, "failed to create MSI domain\n");
@@ -466,7 +471,7 @@ static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
return 0;
}
-static void mc_handle_intx(struct irq_desc *desc)
+static void plda_handle_intx(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -493,7 +498,7 @@ static void mc_handle_intx(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void mc_ack_intx_irq(struct irq_data *data)
+static void plda_ack_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -502,7 +507,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
}
-static void mc_mask_intx_irq(struct irq_data *data)
+static void plda_mask_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -517,7 +522,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
raw_spin_unlock_irqrestore(&port->lock, flags);
}
-static void mc_unmask_intx_irq(struct irq_data *data)
+static void plda_unmask_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -532,24 +537,24 @@ static void mc_unmask_intx_irq(struct irq_data *data)
raw_spin_unlock_irqrestore(&port->lock, flags);
}
-static struct irq_chip mc_intx_irq_chip = {
- .name = "Microchip PCIe INTx",
- .irq_ack = mc_ack_intx_irq,
- .irq_mask = mc_mask_intx_irq,
- .irq_unmask = mc_unmask_intx_irq,
+static struct irq_chip plda_intx_irq_chip = {
+ .name = "PLDA PCIe INTx",
+ .irq_ack = plda_ack_intx_irq,
+ .irq_mask = plda_mask_intx_irq,
+ .irq_unmask = plda_unmask_intx_irq,
};
-static int mc_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
+static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
{
- irq_set_chip_and_handler(irq, &mc_intx_irq_chip, handle_level_irq);
+ irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
irq_set_chip_data(irq, domain->host_data);
return 0;
}
static const struct irq_domain_ops intx_domain_ops = {
- .map = mc_pcie_intx_map,
+ .map = plda_pcie_intx_map,
};
static inline u32 reg_to_event(u32 reg, struct event_map field)
@@ -609,7 +614,7 @@ static u32 local_events(struct mc_pcie *port)
return val;
}
-static u32 get_events(struct plda_pcie_rp *port)
+static u32 mc_get_events(struct plda_pcie_rp *port)
{
struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 events = 0;
@@ -638,7 +643,7 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void mc_handle_event(struct irq_desc *desc)
+static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
unsigned long events;
@@ -647,7 +652,7 @@ static void mc_handle_event(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- events = get_events(port);
+ events = mc_get_events(port);
for_each_set_bit(bit, &events, NUM_EVENTS)
generic_handle_domain_irq(port->event_domain, bit);
@@ -750,7 +755,7 @@ static int mc_pcie_event_map(struct irq_domain *domain, unsigned int irq,
return 0;
}
-static const struct irq_domain_ops event_domain_ops = {
+static const struct irq_domain_ops mc_event_domain_ops = {
.map = mc_pcie_event_map,
};
@@ -799,7 +804,7 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
-static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -813,7 +818,7 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
}
port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS,
- &event_domain_ops, port);
+ &mc_event_domain_ops, port);
if (!port->event_domain) {
dev_err(dev, "failed to get event domain\n");
of_node_put(pcie_intc_node);
@@ -835,7 +840,7 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
of_node_put(pcie_intc_node);
raw_spin_lock_init(&port->lock);
- return mc_allocate_msi_domains(port);
+ return plda_allocate_msi_domains(port);
}
static inline void mc_clear_secs(struct mc_pcie *port)
@@ -898,14 +903,14 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
+static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
{
struct device *dev = &pdev->dev;
int irq;
int i, intx_irq, msi_irq, event_irq;
int ret;
- ret = mc_pcie_init_irq_domains(port);
+ ret = plda_pcie_init_irq_domains(port);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
return ret;
@@ -938,7 +943,7 @@ static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp
}
/* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, mc_handle_intx, port);
+ irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
msi_irq = irq_create_mapping(port->event_domain,
EVENT_LOCAL_PM_MSI_INT_MSI);
@@ -946,10 +951,10 @@ static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp
return -ENXIO;
/* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, mc_handle_msi, port);
+ irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
/* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, mc_handle_event, port);
+ irq_set_chained_handler_and_data(irq, plda_handle_event, port);
return 0;
}
@@ -977,7 +982,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = mc_init_interrupts(pdev, &port->plda);
+ ret = plda_init_interrupts(pdev, &port->plda);
if (ret)
return ret;
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 10/20] PCI: microchip: Rename interrupt related functions
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Rename mc_* to plda_* for IRQ functions and related IRQ domain ops data
instances.
MSI, INTx interrupt codes and IRQ init codes are all can be re-used.
- function rename list:
mc_allocate_msi_domains() --> plda_allocate_msi_domains()
mc_init_interrupts() --> plda_init_interrupts()
mc_pcie_init_irq_domain() --> plda_pcie_init_irq_domains()
mc_handle_event() --> plda_handle_event()
get_events() --> mc_get_events()
MSI interrupts related functions and IRQ domain
(primary function is mc_handle_msi()):
mc_handle_msi() --> plda_handle_msi()
INTx interrupts related functions and IRQ domain
(primary function is mc_handle_intx()):
mc_handle_intx() --> plda_handle_intx()
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 105 +++++++++---------
1 file changed, 55 insertions(+), 50 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 2e79bcc7c0a5..54a0d431a471 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -318,7 +318,7 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
-static void mc_handle_msi(struct irq_desc *desc)
+static void plda_handle_msi(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -333,7 +333,8 @@ static void mc_handle_msi(struct irq_desc *desc)
status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
if (status & PM_MSI_INT_MSI_MASK) {
- writel_relaxed(status & PM_MSI_INT_MSI_MASK, bridge_base_addr + ISTATUS_LOCAL);
+ writel_relaxed(status & PM_MSI_INT_MSI_MASK,
+ bridge_base_addr + ISTATUS_LOCAL);
status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
for_each_set_bit(bit, &status, msi->num_vectors) {
ret = generic_handle_domain_irq(msi->dev_domain, bit);
@@ -346,7 +347,7 @@ static void mc_handle_msi(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void mc_msi_bottom_irq_ack(struct irq_data *data)
+static void plda_msi_bottom_irq_ack(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -355,7 +356,7 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data)
writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
}
-static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
phys_addr_t addr = port->msi.vector_phy;
@@ -368,21 +369,23 @@ static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
(int)data->hwirq, msg->address_hi, msg->address_lo);
}
-static int mc_msi_set_affinity(struct irq_data *irq_data,
- const struct cpumask *mask, bool force)
+static int plda_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
{
return -EINVAL;
}
-static struct irq_chip mc_msi_bottom_irq_chip = {
- .name = "Microchip MSI",
- .irq_ack = mc_msi_bottom_irq_ack,
- .irq_compose_msi_msg = mc_compose_msi_msg,
- .irq_set_affinity = mc_msi_set_affinity,
+static struct irq_chip plda_msi_bottom_irq_chip = {
+ .name = "PLDA MSI",
+ .irq_ack = plda_msi_bottom_irq_ack,
+ .irq_compose_msi_msg = plda_compose_msi_msg,
+ .irq_set_affinity = plda_msi_set_affinity,
};
-static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
- unsigned int nr_irqs, void *args)
+static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs,
+ void *args)
{
struct plda_pcie_rp *port = domain->host_data;
struct plda_msi *msi = &port->msi;
@@ -397,7 +400,7 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
set_bit(bit, msi->used);
- irq_domain_set_info(domain, virq, bit, &mc_msi_bottom_irq_chip,
+ irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
domain->host_data, handle_edge_irq, NULL, NULL);
mutex_unlock(&msi->lock);
@@ -405,8 +408,9 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
return 0;
}
-static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
- unsigned int nr_irqs)
+static void plda_irq_msi_domain_free(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
@@ -423,24 +427,24 @@ static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
}
static const struct irq_domain_ops msi_domain_ops = {
- .alloc = mc_irq_msi_domain_alloc,
- .free = mc_irq_msi_domain_free,
+ .alloc = plda_irq_msi_domain_alloc,
+ .free = plda_irq_msi_domain_free,
};
-static struct irq_chip mc_msi_irq_chip = {
- .name = "Microchip PCIe MSI",
+static struct irq_chip plda_msi_irq_chip = {
+ .name = "PLDA PCIe MSI",
.irq_ack = irq_chip_ack_parent,
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,
};
-static struct msi_domain_info mc_msi_domain_info = {
+static struct msi_domain_info plda_msi_domain_info = {
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
MSI_FLAG_PCI_MSIX),
- .chip = &mc_msi_irq_chip,
+ .chip = &plda_msi_irq_chip,
};
-static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
+static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
@@ -455,7 +459,8 @@ static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
return -ENOMEM;
}
- msi->msi_domain = pci_msi_create_irq_domain(fwnode, &mc_msi_domain_info,
+ msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+ &plda_msi_domain_info,
msi->dev_domain);
if (!msi->msi_domain) {
dev_err(dev, "failed to create MSI domain\n");
@@ -466,7 +471,7 @@ static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
return 0;
}
-static void mc_handle_intx(struct irq_desc *desc)
+static void plda_handle_intx(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -493,7 +498,7 @@ static void mc_handle_intx(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void mc_ack_intx_irq(struct irq_data *data)
+static void plda_ack_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -502,7 +507,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
}
-static void mc_mask_intx_irq(struct irq_data *data)
+static void plda_mask_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -517,7 +522,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
raw_spin_unlock_irqrestore(&port->lock, flags);
}
-static void mc_unmask_intx_irq(struct irq_data *data)
+static void plda_unmask_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -532,24 +537,24 @@ static void mc_unmask_intx_irq(struct irq_data *data)
raw_spin_unlock_irqrestore(&port->lock, flags);
}
-static struct irq_chip mc_intx_irq_chip = {
- .name = "Microchip PCIe INTx",
- .irq_ack = mc_ack_intx_irq,
- .irq_mask = mc_mask_intx_irq,
- .irq_unmask = mc_unmask_intx_irq,
+static struct irq_chip plda_intx_irq_chip = {
+ .name = "PLDA PCIe INTx",
+ .irq_ack = plda_ack_intx_irq,
+ .irq_mask = plda_mask_intx_irq,
+ .irq_unmask = plda_unmask_intx_irq,
};
-static int mc_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
+static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
{
- irq_set_chip_and_handler(irq, &mc_intx_irq_chip, handle_level_irq);
+ irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
irq_set_chip_data(irq, domain->host_data);
return 0;
}
static const struct irq_domain_ops intx_domain_ops = {
- .map = mc_pcie_intx_map,
+ .map = plda_pcie_intx_map,
};
static inline u32 reg_to_event(u32 reg, struct event_map field)
@@ -609,7 +614,7 @@ static u32 local_events(struct mc_pcie *port)
return val;
}
-static u32 get_events(struct plda_pcie_rp *port)
+static u32 mc_get_events(struct plda_pcie_rp *port)
{
struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 events = 0;
@@ -638,7 +643,7 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void mc_handle_event(struct irq_desc *desc)
+static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
unsigned long events;
@@ -647,7 +652,7 @@ static void mc_handle_event(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- events = get_events(port);
+ events = mc_get_events(port);
for_each_set_bit(bit, &events, NUM_EVENTS)
generic_handle_domain_irq(port->event_domain, bit);
@@ -750,7 +755,7 @@ static int mc_pcie_event_map(struct irq_domain *domain, unsigned int irq,
return 0;
}
-static const struct irq_domain_ops event_domain_ops = {
+static const struct irq_domain_ops mc_event_domain_ops = {
.map = mc_pcie_event_map,
};
@@ -799,7 +804,7 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
-static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -813,7 +818,7 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
}
port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS,
- &event_domain_ops, port);
+ &mc_event_domain_ops, port);
if (!port->event_domain) {
dev_err(dev, "failed to get event domain\n");
of_node_put(pcie_intc_node);
@@ -835,7 +840,7 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
of_node_put(pcie_intc_node);
raw_spin_lock_init(&port->lock);
- return mc_allocate_msi_domains(port);
+ return plda_allocate_msi_domains(port);
}
static inline void mc_clear_secs(struct mc_pcie *port)
@@ -898,14 +903,14 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
+static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
{
struct device *dev = &pdev->dev;
int irq;
int i, intx_irq, msi_irq, event_irq;
int ret;
- ret = mc_pcie_init_irq_domains(port);
+ ret = plda_pcie_init_irq_domains(port);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
return ret;
@@ -938,7 +943,7 @@ static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp
}
/* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, mc_handle_intx, port);
+ irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
msi_irq = irq_create_mapping(port->event_domain,
EVENT_LOCAL_PM_MSI_INT_MSI);
@@ -946,10 +951,10 @@ static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp
return -ENXIO;
/* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, mc_handle_msi, port);
+ irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
/* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, mc_handle_event, port);
+ irq_set_chained_handler_and_data(irq, plda_handle_event, port);
return 0;
}
@@ -977,7 +982,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = mc_init_interrupts(pdev, &port->plda);
+ ret = plda_init_interrupts(pdev, &port->plda);
if (ret)
return ret;
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 11/20] PCI: microchip: Add num_events field to struct plda_pcie_rp
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
The event num is different in other platform. For re-use interrupt process
codes, replace with variable.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 8 +++++---
drivers/pci/controller/plda/pcie-plda.h | 1 +
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 54a0d431a471..d42278c006bc 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -654,7 +654,7 @@ static void plda_handle_event(struct irq_desc *desc)
events = mc_get_events(port);
- for_each_set_bit(bit, &events, NUM_EVENTS)
+ for_each_set_bit(bit, &events, port->num_events)
generic_handle_domain_irq(port->event_domain, bit);
chained_irq_exit(chip, desc);
@@ -817,7 +817,8 @@ static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
return -EINVAL;
}
- port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS,
+ port->event_domain = irq_domain_add_linear(pcie_intc_node,
+ port->num_events,
&mc_event_domain_ops, port);
if (!port->event_domain) {
dev_err(dev, "failed to get event domain\n");
@@ -920,7 +921,7 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r
if (irq < 0)
return -ENODEV;
- for (i = 0; i < NUM_EVENTS; i++) {
+ for (i = 0; i < port->num_events; i++) {
event_irq = irq_create_mapping(port->event_domain, i);
if (!event_irq) {
dev_err(dev, "failed to map hwirq %d\n", i);
@@ -1012,6 +1013,7 @@ static int mc_host_probe(struct platform_device *pdev)
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
plda->bridge_addr = bridge_base_addr;
+ plda->num_events = NUM_EVENTS;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 3deefd35fa5a..e3d35cef9894 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -118,6 +118,7 @@ struct plda_pcie_rp {
raw_spinlock_t lock;
struct plda_msi msi;
void __iomem *bridge_addr;
+ int num_events;
};
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 11/20] PCI: microchip: Add num_events field to struct plda_pcie_rp
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
The event num is different in other platform. For re-use interrupt process
codes, replace with variable.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 8 +++++---
drivers/pci/controller/plda/pcie-plda.h | 1 +
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 54a0d431a471..d42278c006bc 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -654,7 +654,7 @@ static void plda_handle_event(struct irq_desc *desc)
events = mc_get_events(port);
- for_each_set_bit(bit, &events, NUM_EVENTS)
+ for_each_set_bit(bit, &events, port->num_events)
generic_handle_domain_irq(port->event_domain, bit);
chained_irq_exit(chip, desc);
@@ -817,7 +817,8 @@ static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
return -EINVAL;
}
- port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS,
+ port->event_domain = irq_domain_add_linear(pcie_intc_node,
+ port->num_events,
&mc_event_domain_ops, port);
if (!port->event_domain) {
dev_err(dev, "failed to get event domain\n");
@@ -920,7 +921,7 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r
if (irq < 0)
return -ENODEV;
- for (i = 0; i < NUM_EVENTS; i++) {
+ for (i = 0; i < port->num_events; i++) {
event_irq = irq_create_mapping(port->event_domain, i);
if (!event_irq) {
dev_err(dev, "failed to map hwirq %d\n", i);
@@ -1012,6 +1013,7 @@ static int mc_host_probe(struct platform_device *pdev)
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
plda->bridge_addr = bridge_base_addr;
+ plda->num_events = NUM_EVENTS;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 3deefd35fa5a..e3d35cef9894 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -118,6 +118,7 @@ struct plda_pcie_rp {
raw_spinlock_t lock;
struct plda_msi msi;
void __iomem *bridge_addr;
+ int num_events;
};
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 12/20] PCI: microchip: Add request_event_irq() callback function
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
PolarFire implements specific PCIe interrupts except PLDA local interrupt.
For lack of MSI controller, these interrupts have to be added to global
event field. PolarFire driver also register additional interrupt symbol
name.
PolarFire PCIe contain total 28 interrupts event while PLDA contain 13
local interrupts event, interrupt to event num mapping is different.
So add a callback function to support different IRQ register function.
Also Add PLDA default handler function, which will be moved to pcie-
plda-host.c in moving codes patch.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 31 ++++++++++++++++---
drivers/pci/controller/plda/pcie-plda.h | 5 +++
2 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index d42278c006bc..f89d102f4979 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -643,6 +643,11 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t plda_event_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -804,6 +809,17 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
+static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
+ int event)
+{
+ return devm_request_irq(plda->dev, event_irq, mc_event_handler,
+ 0, event_cause[event].sym, plda);
+}
+
+static const struct plda_event mc_event = {
+ .request_event_irq = mc_request_event_irq,
+};
+
static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
@@ -904,7 +920,9 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
+static int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event)
{
struct device *dev = &pdev->dev;
int irq;
@@ -928,8 +946,13 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r
return -ENXIO;
}
- ret = devm_request_irq(dev, event_irq, mc_event_handler,
- 0, event_cause[i].sym, port);
+ if (event->request_event_irq)
+ ret = event->request_event_irq(port, event_irq, i);
+ else
+ ret = devm_request_irq(dev, event_irq,
+ plda_event_handler,
+ 0, NULL, port);
+
if (ret) {
dev_err(dev, "failed to request IRQ %d\n", event_irq);
return ret;
@@ -983,7 +1006,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = plda_init_interrupts(pdev, &port->plda);
+ ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
if (ret)
return ret;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index e3d35cef9894..28ed1374e1de 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -121,6 +121,11 @@ struct plda_pcie_rp {
int num_events;
};
+struct plda_event {
+ int (*request_event_irq)(struct plda_pcie_rp *pcie,
+ int event_irq, int event);
+};
+
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size);
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 12/20] PCI: microchip: Add request_event_irq() callback function
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
PolarFire implements specific PCIe interrupts except PLDA local interrupt.
For lack of MSI controller, these interrupts have to be added to global
event field. PolarFire driver also register additional interrupt symbol
name.
PolarFire PCIe contain total 28 interrupts event while PLDA contain 13
local interrupts event, interrupt to event num mapping is different.
So add a callback function to support different IRQ register function.
Also Add PLDA default handler function, which will be moved to pcie-
plda-host.c in moving codes patch.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 31 ++++++++++++++++---
drivers/pci/controller/plda/pcie-plda.h | 5 +++
2 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index d42278c006bc..f89d102f4979 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -643,6 +643,11 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t plda_event_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -804,6 +809,17 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
+static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
+ int event)
+{
+ return devm_request_irq(plda->dev, event_irq, mc_event_handler,
+ 0, event_cause[event].sym, plda);
+}
+
+static const struct plda_event mc_event = {
+ .request_event_irq = mc_request_event_irq,
+};
+
static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
@@ -904,7 +920,9 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
+static int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event)
{
struct device *dev = &pdev->dev;
int irq;
@@ -928,8 +946,13 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r
return -ENXIO;
}
- ret = devm_request_irq(dev, event_irq, mc_event_handler,
- 0, event_cause[i].sym, port);
+ if (event->request_event_irq)
+ ret = event->request_event_irq(port, event_irq, i);
+ else
+ ret = devm_request_irq(dev, event_irq,
+ plda_event_handler,
+ 0, NULL, port);
+
if (ret) {
dev_err(dev, "failed to request IRQ %d\n", event_irq);
return ret;
@@ -983,7 +1006,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = plda_init_interrupts(pdev, &port->plda);
+ ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
if (ret)
return ret;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index e3d35cef9894..28ed1374e1de 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -121,6 +121,11 @@ struct plda_pcie_rp {
int num_events;
};
+struct plda_event {
+ int (*request_event_irq)(struct plda_pcie_rp *pcie,
+ int event_irq, int event);
+};
+
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size);
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 13/20] PCI: microchip: Add INTx and MSI event num to struct plda_event
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
The INTx and MSI interrupt event num is different in Microchip and
StarFive platform.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 ++++--
drivers/pci/controller/plda/pcie-plda.h | 2 ++
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index f89d102f4979..2c03b0354f15 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -818,6 +818,8 @@ static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
static const struct plda_event mc_event = {
.request_event_irq = mc_request_event_irq,
+ .intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
+ .msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
@@ -960,7 +962,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
}
intx_irq = irq_create_mapping(port->event_domain,
- EVENT_LOCAL_PM_MSI_INT_INTX);
+ event->intx_event);
if (!intx_irq) {
dev_err(dev, "failed to map INTx interrupt\n");
return -ENXIO;
@@ -970,7 +972,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
msi_irq = irq_create_mapping(port->event_domain,
- EVENT_LOCAL_PM_MSI_INT_MSI);
+ event->msi_event);
if (!msi_irq)
return -ENXIO;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 28ed1374e1de..fba7343f9a96 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -124,6 +124,8 @@ struct plda_pcie_rp {
struct plda_event {
int (*request_event_irq)(struct plda_pcie_rp *pcie,
int event_irq, int event);
+ int intx_event;
+ int msi_event;
};
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 13/20] PCI: microchip: Add INTx and MSI event num to struct plda_event
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
The INTx and MSI interrupt event num is different in Microchip and
StarFive platform.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 ++++--
drivers/pci/controller/plda/pcie-plda.h | 2 ++
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index f89d102f4979..2c03b0354f15 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -818,6 +818,8 @@ static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
static const struct plda_event mc_event = {
.request_event_irq = mc_request_event_irq,
+ .intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
+ .msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
@@ -960,7 +962,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
}
intx_irq = irq_create_mapping(port->event_domain,
- EVENT_LOCAL_PM_MSI_INT_INTX);
+ event->intx_event);
if (!intx_irq) {
dev_err(dev, "failed to map INTx interrupt\n");
return -ENXIO;
@@ -970,7 +972,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
msi_irq = irq_create_mapping(port->event_domain,
- EVENT_LOCAL_PM_MSI_INT_MSI);
+ event->msi_event);
if (!msi_irq)
return -ENXIO;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 28ed1374e1de..fba7343f9a96 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -124,6 +124,8 @@ struct plda_pcie_rp {
struct plda_event {
int (*request_event_irq)(struct plda_pcie_rp *pcie,
int event_irq, int event);
+ int intx_event;
+ int msi_event;
};
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 14/20] PCI: microchip: Add get_events() callback function
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
PolarFire implements its own PCIe interrupts, additional to the regular
PCIe interrupts, due to lack of an MSI controller, so the interrupt to
event number mapping is different to the PLDA local interrupts,
necessitating a custom get_events() implementation.
plda_handle_events() will call the get_events() callback function pointer
directly. For the robustness of codes, add checking in
plda_init_interrupts().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 14 +++++++++++++-
drivers/pci/controller/plda/pcie-plda.h | 8 ++++++++
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 2c03b0354f15..f5e7da242aec 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -657,7 +657,7 @@ static void plda_handle_event(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- events = mc_get_events(port);
+ events = port->event_ops->get_events(port);
for_each_set_bit(bit, &events, port->num_events)
generic_handle_domain_irq(port->event_domain, bit);
@@ -816,7 +816,12 @@ static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
0, event_cause[event].sym, plda);
}
+static const struct plda_event_ops mc_event_ops = {
+ .get_events = mc_get_events,
+};
+
static const struct plda_event mc_event = {
+ .event_ops = &mc_event_ops,
.request_event_irq = mc_request_event_irq,
.intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
.msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
@@ -931,6 +936,11 @@ static int plda_init_interrupts(struct platform_device *pdev,
int i, intx_irq, msi_irq, event_irq;
int ret;
+ if (!event->event_ops || !event->event_ops->get_events) {
+ dev_err(dev, "no get events ops\n");
+ return -EINVAL;
+ }
+
ret = plda_pcie_init_irq_domains(port);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
@@ -941,6 +951,8 @@ static int plda_init_interrupts(struct platform_device *pdev,
if (irq < 0)
return -ENODEV;
+ port->event_ops = event->event_ops;
+
for (i = 0; i < port->num_events; i++) {
event_irq = irq_create_mapping(port->event_domain, i);
if (!event_irq) {
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index fba7343f9a96..df1729095952 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -102,6 +102,12 @@
#define EVENT_PM_MSI_INT_SYS_ERR 12
#define NUM_PLDA_EVENTS 13
+struct plda_pcie_rp;
+
+struct plda_event_ops {
+ u32 (*get_events)(struct plda_pcie_rp *pcie);
+};
+
struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
@@ -117,11 +123,13 @@ struct plda_pcie_rp {
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct plda_msi msi;
+ const struct plda_event_ops *event_ops;
void __iomem *bridge_addr;
int num_events;
};
struct plda_event {
+ const struct plda_event_ops *event_ops;
int (*request_event_irq)(struct plda_pcie_rp *pcie,
int event_irq, int event);
int intx_event;
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 14/20] PCI: microchip: Add get_events() callback function
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
PolarFire implements its own PCIe interrupts, additional to the regular
PCIe interrupts, due to lack of an MSI controller, so the interrupt to
event number mapping is different to the PLDA local interrupts,
necessitating a custom get_events() implementation.
plda_handle_events() will call the get_events() callback function pointer
directly. For the robustness of codes, add checking in
plda_init_interrupts().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 14 +++++++++++++-
drivers/pci/controller/plda/pcie-plda.h | 8 ++++++++
2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 2c03b0354f15..f5e7da242aec 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -657,7 +657,7 @@ static void plda_handle_event(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- events = mc_get_events(port);
+ events = port->event_ops->get_events(port);
for_each_set_bit(bit, &events, port->num_events)
generic_handle_domain_irq(port->event_domain, bit);
@@ -816,7 +816,12 @@ static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
0, event_cause[event].sym, plda);
}
+static const struct plda_event_ops mc_event_ops = {
+ .get_events = mc_get_events,
+};
+
static const struct plda_event mc_event = {
+ .event_ops = &mc_event_ops,
.request_event_irq = mc_request_event_irq,
.intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
.msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
@@ -931,6 +936,11 @@ static int plda_init_interrupts(struct platform_device *pdev,
int i, intx_irq, msi_irq, event_irq;
int ret;
+ if (!event->event_ops || !event->event_ops->get_events) {
+ dev_err(dev, "no get events ops\n");
+ return -EINVAL;
+ }
+
ret = plda_pcie_init_irq_domains(port);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
@@ -941,6 +951,8 @@ static int plda_init_interrupts(struct platform_device *pdev,
if (irq < 0)
return -ENODEV;
+ port->event_ops = event->event_ops;
+
for (i = 0; i < port->num_events; i++) {
event_irq = irq_create_mapping(port->event_domain, i);
if (!event_irq) {
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index fba7343f9a96..df1729095952 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -102,6 +102,12 @@
#define EVENT_PM_MSI_INT_SYS_ERR 12
#define NUM_PLDA_EVENTS 13
+struct plda_pcie_rp;
+
+struct plda_event_ops {
+ u32 (*get_events)(struct plda_pcie_rp *pcie);
+};
+
struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
@@ -117,11 +123,13 @@ struct plda_pcie_rp {
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct plda_msi msi;
+ const struct plda_event_ops *event_ops;
void __iomem *bridge_addr;
int num_events;
};
struct plda_event {
+ const struct plda_event_ops *event_ops;
int (*request_event_irq)(struct plda_pcie_rp *pcie,
int event_irq, int event);
int intx_event;
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 15/20] PCI: microchip: Add event IRQ domain ops to struct plda_event
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
For lack of an MSI controller, The new added PCIe interrupts have to be
added to global interrupt event field. PolarFire event domain ops can not
be re-used.
PLDA event domain ops instances will be implemented in later patch.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 ++++--
drivers/pci/controller/plda/pcie-plda.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index f5e7da242aec..e6dcc572b65b 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -821,13 +821,15 @@ static const struct plda_event_ops mc_event_ops = {
};
static const struct plda_event mc_event = {
+ .domain_ops = &mc_event_domain_ops,
.event_ops = &mc_event_ops,
.request_event_irq = mc_request_event_irq,
.intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
.msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
-static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
+ const struct irq_domain_ops *ops)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -941,7 +943,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
return -EINVAL;
}
- ret = plda_pcie_init_irq_domains(port);
+ ret = plda_pcie_init_irq_domains(port, event->domain_ops);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
return ret;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index df1729095952..820ea16855b5 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -129,6 +129,7 @@ struct plda_pcie_rp {
};
struct plda_event {
+ const struct irq_domain_ops *domain_ops;
const struct plda_event_ops *event_ops;
int (*request_event_irq)(struct plda_pcie_rp *pcie,
int event_irq, int event);
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 15/20] PCI: microchip: Add event IRQ domain ops to struct plda_event
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
For lack of an MSI controller, The new added PCIe interrupts have to be
added to global interrupt event field. PolarFire event domain ops can not
be re-used.
PLDA event domain ops instances will be implemented in later patch.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 ++++--
drivers/pci/controller/plda/pcie-plda.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index f5e7da242aec..e6dcc572b65b 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -821,13 +821,15 @@ static const struct plda_event_ops mc_event_ops = {
};
static const struct plda_event mc_event = {
+ .domain_ops = &mc_event_domain_ops,
.event_ops = &mc_event_ops,
.request_event_irq = mc_request_event_irq,
.intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
.msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
-static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
+ const struct irq_domain_ops *ops)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -941,7 +943,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
return -EINVAL;
}
- ret = plda_pcie_init_irq_domains(port);
+ ret = plda_pcie_init_irq_domains(port, event->domain_ops);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
return ret;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index df1729095952..820ea16855b5 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -129,6 +129,7 @@ struct plda_pcie_rp {
};
struct plda_event {
+ const struct irq_domain_ops *domain_ops;
const struct plda_event_ops *event_ops;
int (*request_event_irq)(struct plda_pcie_rp *pcie,
int event_irq, int event);
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 16/20] PCI: microchip: Move IRQ functions to pcie-plda-host.c
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move IRQ related functions to pcie-plda-host.c for re-use these codes.
Now Refactoring codes complete.
Including MSI, INTx, event interrupts and IRQ init functions.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 372 -----------------
drivers/pci/controller/plda/pcie-plda-host.c | 373 ++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 3 +
3 files changed, 376 insertions(+), 372 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index e6dcc572b65b..6995461daec7 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -318,245 +318,6 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
-static void plda_handle_msi(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct device *dev = port->dev;
- struct plda_msi *msi = &port->msi;
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long status;
- u32 bit;
- int ret;
-
- chained_irq_enter(chip, desc);
-
- status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
- if (status & PM_MSI_INT_MSI_MASK) {
- writel_relaxed(status & PM_MSI_INT_MSI_MASK,
- bridge_base_addr + ISTATUS_LOCAL);
- status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
- for_each_set_bit(bit, &status, msi->num_vectors) {
- ret = generic_handle_domain_irq(msi->dev_domain, bit);
- if (ret)
- dev_err_ratelimited(dev, "bad MSI IRQ %d\n",
- bit);
- }
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static void plda_msi_bottom_irq_ack(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- u32 bitpos = data->hwirq;
-
- writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
-}
-
-static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- phys_addr_t addr = port->msi.vector_phy;
-
- msg->address_lo = lower_32_bits(addr);
- msg->address_hi = upper_32_bits(addr);
- msg->data = data->hwirq;
-
- dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n",
- (int)data->hwirq, msg->address_hi, msg->address_lo);
-}
-
-static int plda_msi_set_affinity(struct irq_data *irq_data,
- const struct cpumask *mask, bool force)
-{
- return -EINVAL;
-}
-
-static struct irq_chip plda_msi_bottom_irq_chip = {
- .name = "PLDA MSI",
- .irq_ack = plda_msi_bottom_irq_ack,
- .irq_compose_msi_msg = plda_compose_msi_msg,
- .irq_set_affinity = plda_msi_set_affinity,
-};
-
-static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
- unsigned int virq,
- unsigned int nr_irqs,
- void *args)
-{
- struct plda_pcie_rp *port = domain->host_data;
- struct plda_msi *msi = &port->msi;
- unsigned long bit;
-
- mutex_lock(&msi->lock);
- bit = find_first_zero_bit(msi->used, msi->num_vectors);
- if (bit >= msi->num_vectors) {
- mutex_unlock(&msi->lock);
- return -ENOSPC;
- }
-
- set_bit(bit, msi->used);
-
- irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
- domain->host_data, handle_edge_irq, NULL, NULL);
-
- mutex_unlock(&msi->lock);
-
- return 0;
-}
-
-static void plda_irq_msi_domain_free(struct irq_domain *domain,
- unsigned int virq,
- unsigned int nr_irqs)
-{
- struct irq_data *d = irq_domain_get_irq_data(domain, virq);
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
- struct plda_msi *msi = &port->msi;
-
- mutex_lock(&msi->lock);
-
- if (test_bit(d->hwirq, msi->used))
- __clear_bit(d->hwirq, msi->used);
- else
- dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
-
- mutex_unlock(&msi->lock);
-}
-
-static const struct irq_domain_ops msi_domain_ops = {
- .alloc = plda_irq_msi_domain_alloc,
- .free = plda_irq_msi_domain_free,
-};
-
-static struct irq_chip plda_msi_irq_chip = {
- .name = "PLDA PCIe MSI",
- .irq_ack = irq_chip_ack_parent,
- .irq_mask = pci_msi_mask_irq,
- .irq_unmask = pci_msi_unmask_irq,
-};
-
-static struct msi_domain_info plda_msi_domain_info = {
- .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
- MSI_FLAG_PCI_MSIX),
- .chip = &plda_msi_irq_chip,
-};
-
-static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
-{
- struct device *dev = port->dev;
- struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
- struct plda_msi *msi = &port->msi;
-
- mutex_init(&port->msi.lock);
-
- msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors,
- &msi_domain_ops, port);
- if (!msi->dev_domain) {
- dev_err(dev, "failed to create IRQ domain\n");
- return -ENOMEM;
- }
-
- msi->msi_domain = pci_msi_create_irq_domain(fwnode,
- &plda_msi_domain_info,
- msi->dev_domain);
- if (!msi->msi_domain) {
- dev_err(dev, "failed to create MSI domain\n");
- irq_domain_remove(msi->dev_domain);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void plda_handle_intx(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct device *dev = port->dev;
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long status;
- u32 bit;
- int ret;
-
- chained_irq_enter(chip, desc);
-
- status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
- if (status & PM_MSI_INT_INTX_MASK) {
- status &= PM_MSI_INT_INTX_MASK;
- status >>= PM_MSI_INT_INTX_SHIFT;
- for_each_set_bit(bit, &status, PCI_NUM_INTX) {
- ret = generic_handle_domain_irq(port->intx_domain, bit);
- if (ret)
- dev_err_ratelimited(dev, "bad INTx IRQ %d\n",
- bit);
- }
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static void plda_ack_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
-
- writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
-}
-
-static void plda_mask_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long flags;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
- u32 val;
-
- raw_spin_lock_irqsave(&port->lock, flags);
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val &= ~mask;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
- raw_spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void plda_unmask_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long flags;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
- u32 val;
-
- raw_spin_lock_irqsave(&port->lock, flags);
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val |= mask;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
- raw_spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static struct irq_chip plda_intx_irq_chip = {
- .name = "PLDA PCIe INTx",
- .irq_ack = plda_ack_intx_irq,
- .irq_mask = plda_mask_intx_irq,
- .irq_unmask = plda_unmask_intx_irq,
-};
-
-static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
- irq_set_chip_data(irq, domain->host_data);
-
- return 0;
-}
-
-static const struct irq_domain_ops intx_domain_ops = {
- .map = plda_pcie_intx_map,
-};
-
static inline u32 reg_to_event(u32 reg, struct event_map field)
{
return (reg & field.reg_mask) ? BIT(field.event_bit) : 0;
@@ -643,28 +404,6 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static irqreturn_t plda_event_handler(int irq, void *dev_id)
-{
- return IRQ_HANDLED;
-}
-
-static void plda_handle_event(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- unsigned long events;
- u32 bit;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- chained_irq_enter(chip, desc);
-
- events = port->event_ops->get_events(port);
-
- for_each_set_bit(bit, &events, port->num_events)
- generic_handle_domain_irq(port->event_domain, bit);
-
- chained_irq_exit(chip, desc);
-}
-
static void mc_ack_event_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
@@ -828,47 +567,6 @@ static const struct plda_event mc_event = {
.msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
-static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
- const struct irq_domain_ops *ops)
-{
- struct device *dev = port->dev;
- struct device_node *node = dev->of_node;
- struct device_node *pcie_intc_node;
-
- /* Setup INTx */
- pcie_intc_node = of_get_next_child(node, NULL);
- if (!pcie_intc_node) {
- dev_err(dev, "failed to find PCIe Intc node\n");
- return -EINVAL;
- }
-
- port->event_domain = irq_domain_add_linear(pcie_intc_node,
- port->num_events,
- &mc_event_domain_ops, port);
- if (!port->event_domain) {
- dev_err(dev, "failed to get event domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
- }
-
- irq_domain_update_bus_token(port->event_domain, DOMAIN_BUS_NEXUS);
-
- port->intx_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
- &intx_domain_ops, port);
- if (!port->intx_domain) {
- dev_err(dev, "failed to get an INTx IRQ domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
- }
-
- irq_domain_update_bus_token(port->intx_domain, DOMAIN_BUS_WIRED);
-
- of_node_put(pcie_intc_node);
- raw_spin_lock_init(&port->lock);
-
- return plda_allocate_msi_domains(port);
-}
-
static inline void mc_clear_secs(struct mc_pcie *port)
{
void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
@@ -929,76 +627,6 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int plda_init_interrupts(struct platform_device *pdev,
- struct plda_pcie_rp *port,
- const struct plda_event *event)
-{
- struct device *dev = &pdev->dev;
- int irq;
- int i, intx_irq, msi_irq, event_irq;
- int ret;
-
- if (!event->event_ops || !event->event_ops->get_events) {
- dev_err(dev, "no get events ops\n");
- return -EINVAL;
- }
-
- ret = plda_pcie_init_irq_domains(port, event->domain_ops);
- if (ret) {
- dev_err(dev, "failed creating IRQ domains\n");
- return ret;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -ENODEV;
-
- port->event_ops = event->event_ops;
-
- for (i = 0; i < port->num_events; i++) {
- event_irq = irq_create_mapping(port->event_domain, i);
- if (!event_irq) {
- dev_err(dev, "failed to map hwirq %d\n", i);
- return -ENXIO;
- }
-
- if (event->request_event_irq)
- ret = event->request_event_irq(port, event_irq, i);
- else
- ret = devm_request_irq(dev, event_irq,
- plda_event_handler,
- 0, NULL, port);
-
- if (ret) {
- dev_err(dev, "failed to request IRQ %d\n", event_irq);
- return ret;
- }
- }
-
- intx_irq = irq_create_mapping(port->event_domain,
- event->intx_event);
- if (!intx_irq) {
- dev_err(dev, "failed to map INTx interrupt\n");
- return -ENXIO;
- }
-
- /* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
-
- msi_irq = irq_create_mapping(port->event_domain,
- event->msi_event);
- if (!msi_irq)
- return -ENXIO;
-
- /* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
-
- /* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, plda_handle_event, port);
-
- return 0;
-}
-
static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index 19131181897f..e155d1d78627 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -18,6 +18,379 @@
#include "pcie-plda.h"
+static void plda_handle_msi(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct device *dev = port->dev;
+ struct plda_msi *msi = &port->msi;
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long status;
+ u32 bit;
+ int ret;
+
+ chained_irq_enter(chip, desc);
+
+ status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
+ if (status & PM_MSI_INT_MSI_MASK) {
+ writel_relaxed(status & PM_MSI_INT_MSI_MASK,
+ bridge_base_addr + ISTATUS_LOCAL);
+ status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
+ for_each_set_bit(bit, &status, msi->num_vectors) {
+ ret = generic_handle_domain_irq(msi->dev_domain, bit);
+ if (ret)
+ dev_err_ratelimited(dev, "bad MSI IRQ %d\n",
+ bit);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void plda_msi_bottom_irq_ack(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ u32 bitpos = data->hwirq;
+
+ writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
+}
+
+static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ phys_addr_t addr = port->msi.vector_phy;
+
+ msg->address_lo = lower_32_bits(addr);
+ msg->address_hi = upper_32_bits(addr);
+ msg->data = data->hwirq;
+
+ dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n",
+ (int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int plda_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
+{
+ return -EINVAL;
+}
+
+static struct irq_chip plda_msi_bottom_irq_chip = {
+ .name = "PLDA MSI",
+ .irq_ack = plda_msi_bottom_irq_ack,
+ .irq_compose_msi_msg = plda_compose_msi_msg,
+ .irq_set_affinity = plda_msi_set_affinity,
+};
+
+static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs,
+ void *args)
+{
+ struct plda_pcie_rp *port = domain->host_data;
+ struct plda_msi *msi = &port->msi;
+ unsigned long bit;
+
+ mutex_lock(&msi->lock);
+ bit = find_first_zero_bit(msi->used, msi->num_vectors);
+ if (bit >= msi->num_vectors) {
+ mutex_unlock(&msi->lock);
+ return -ENOSPC;
+ }
+
+ set_bit(bit, msi->used);
+
+ irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
+ domain->host_data, handle_edge_irq, NULL, NULL);
+
+ mutex_unlock(&msi->lock);
+
+ return 0;
+}
+
+static void plda_irq_msi_domain_free(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
+ struct plda_msi *msi = &port->msi;
+
+ mutex_lock(&msi->lock);
+
+ if (test_bit(d->hwirq, msi->used))
+ __clear_bit(d->hwirq, msi->used);
+ else
+ dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
+
+ mutex_unlock(&msi->lock);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+ .alloc = plda_irq_msi_domain_alloc,
+ .free = plda_irq_msi_domain_free,
+};
+
+static struct irq_chip plda_msi_irq_chip = {
+ .name = "PLDA PCIe MSI",
+ .irq_ack = irq_chip_ack_parent,
+ .irq_mask = pci_msi_mask_irq,
+ .irq_unmask = pci_msi_unmask_irq,
+};
+
+static struct msi_domain_info plda_msi_domain_info = {
+ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+ MSI_FLAG_PCI_MSIX),
+ .chip = &plda_msi_irq_chip,
+};
+
+static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
+{
+ struct device *dev = port->dev;
+ struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
+ struct plda_msi *msi = &port->msi;
+
+ mutex_init(&port->msi.lock);
+
+ msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors,
+ &msi_domain_ops, port);
+ if (!msi->dev_domain) {
+ dev_err(dev, "failed to create IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+ &plda_msi_domain_info,
+ msi->dev_domain);
+ if (!msi->msi_domain) {
+ dev_err(dev, "failed to create MSI domain\n");
+ irq_domain_remove(msi->dev_domain);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void plda_handle_intx(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct device *dev = port->dev;
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long status;
+ u32 bit;
+ int ret;
+
+ chained_irq_enter(chip, desc);
+
+ status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
+ if (status & PM_MSI_INT_INTX_MASK) {
+ status &= PM_MSI_INT_INTX_MASK;
+ status >>= PM_MSI_INT_INTX_SHIFT;
+ for_each_set_bit(bit, &status, PCI_NUM_INTX) {
+ ret = generic_handle_domain_irq(port->intx_domain, bit);
+ if (ret)
+ dev_err_ratelimited(dev, "bad INTx IRQ %d\n",
+ bit);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void plda_ack_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+
+ writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
+}
+
+static void plda_mask_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long flags;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+ u32 val;
+
+ raw_spin_lock_irqsave(&port->lock, flags);
+ val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
+ val &= ~mask;
+ writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
+ raw_spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void plda_unmask_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long flags;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+ u32 val;
+
+ raw_spin_lock_irqsave(&port->lock, flags);
+ val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
+ val |= mask;
+ writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
+ raw_spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct irq_chip plda_intx_irq_chip = {
+ .name = "PLDA PCIe INTx",
+ .irq_ack = plda_ack_intx_irq,
+ .irq_mask = plda_mask_intx_irq,
+ .irq_unmask = plda_unmask_intx_irq,
+};
+
+static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+ .map = plda_pcie_intx_map,
+};
+
+static irqreturn_t plda_event_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static void plda_handle_event(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ unsigned long events;
+ u32 bit;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
+
+ events = port->event_ops->get_events(port);
+
+ for_each_set_bit(bit, &events, port->num_events)
+ generic_handle_domain_irq(port->event_domain, bit);
+
+ chained_irq_exit(chip, desc);
+}
+
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
+ const struct irq_domain_ops *ops)
+{
+ struct device *dev = port->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *pcie_intc_node;
+
+ /* Setup INTx */
+ pcie_intc_node = of_get_next_child(node, NULL);
+ if (!pcie_intc_node) {
+ dev_err(dev, "failed to find PCIe Intc node\n");
+ return -EINVAL;
+ }
+
+ port->event_domain = irq_domain_add_linear(pcie_intc_node,
+ port->num_events,
+ ops, port);
+ if (!port->event_domain) {
+ dev_err(dev, "failed to get event domain\n");
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ irq_domain_update_bus_token(port->event_domain, DOMAIN_BUS_NEXUS);
+
+ port->intx_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
+ &intx_domain_ops, port);
+ if (!port->intx_domain) {
+ dev_err(dev, "failed to get an INTx IRQ domain\n");
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ irq_domain_update_bus_token(port->intx_domain, DOMAIN_BUS_WIRED);
+
+ of_node_put(pcie_intc_node);
+ raw_spin_lock_init(&port->lock);
+
+ return plda_allocate_msi_domains(port);
+}
+
+int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event)
+{
+ struct device *dev = &pdev->dev;
+ int irq;
+ int i, intx_irq, msi_irq, event_irq;
+ int ret;
+
+ if (!event->event_ops || !event->event_ops->get_events) {
+ dev_err(dev, "no get events ops\n");
+ return -EINVAL;
+ }
+
+ ret = plda_pcie_init_irq_domains(port, event->domain_ops);
+ if (ret) {
+ dev_err(dev, "failed creating IRQ domains\n");
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENODEV;
+
+ port->event_ops = event->event_ops;
+
+ for (i = 0; i < port->num_events; i++) {
+ event_irq = irq_create_mapping(port->event_domain, i);
+ if (!event_irq) {
+ dev_err(dev, "failed to map hwirq %d\n", i);
+ return -ENXIO;
+ }
+
+ if (event->request_event_irq)
+ ret = event->request_event_irq(port, event_irq, i);
+ else
+ ret = devm_request_irq(dev, event_irq,
+ plda_event_handler,
+ 0, NULL, port);
+
+ if (ret) {
+ dev_err(dev, "failed to request IRQ %d\n", event_irq);
+ return ret;
+ }
+ }
+
+ intx_irq = irq_create_mapping(port->event_domain,
+ event->intx_event);
+ if (!intx_irq) {
+ dev_err(dev, "failed to map INTx interrupt\n");
+ return -ENXIO;
+ }
+
+ /* Plug the INTx chained handler */
+ irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
+
+ msi_irq = irq_create_mapping(port->event_domain,
+ event->msi_event);
+ if (!msi_irq)
+ return -ENXIO;
+
+ /* Plug the MSI chained handler */
+ irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
+
+ /* Plug the main event chained handler */
+ irq_set_chained_handler_and_data(irq, plda_handle_event, port);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plda_init_interrupts);
+
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size)
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 820ea16855b5..ce7787aef4b7 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -137,6 +137,9 @@ struct plda_event {
int msi_event;
};
+int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event);
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size);
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 16/20] PCI: microchip: Move IRQ functions to pcie-plda-host.c
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Move IRQ related functions to pcie-plda-host.c for re-use these codes.
Now Refactoring codes complete.
Including MSI, INTx, event interrupts and IRQ init functions.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
.../pci/controller/plda/pcie-microchip-host.c | 372 -----------------
drivers/pci/controller/plda/pcie-plda-host.c | 373 ++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 3 +
3 files changed, 376 insertions(+), 372 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index e6dcc572b65b..6995461daec7 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -318,245 +318,6 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
-static void plda_handle_msi(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct device *dev = port->dev;
- struct plda_msi *msi = &port->msi;
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long status;
- u32 bit;
- int ret;
-
- chained_irq_enter(chip, desc);
-
- status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
- if (status & PM_MSI_INT_MSI_MASK) {
- writel_relaxed(status & PM_MSI_INT_MSI_MASK,
- bridge_base_addr + ISTATUS_LOCAL);
- status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
- for_each_set_bit(bit, &status, msi->num_vectors) {
- ret = generic_handle_domain_irq(msi->dev_domain, bit);
- if (ret)
- dev_err_ratelimited(dev, "bad MSI IRQ %d\n",
- bit);
- }
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static void plda_msi_bottom_irq_ack(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- u32 bitpos = data->hwirq;
-
- writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
-}
-
-static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- phys_addr_t addr = port->msi.vector_phy;
-
- msg->address_lo = lower_32_bits(addr);
- msg->address_hi = upper_32_bits(addr);
- msg->data = data->hwirq;
-
- dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n",
- (int)data->hwirq, msg->address_hi, msg->address_lo);
-}
-
-static int plda_msi_set_affinity(struct irq_data *irq_data,
- const struct cpumask *mask, bool force)
-{
- return -EINVAL;
-}
-
-static struct irq_chip plda_msi_bottom_irq_chip = {
- .name = "PLDA MSI",
- .irq_ack = plda_msi_bottom_irq_ack,
- .irq_compose_msi_msg = plda_compose_msi_msg,
- .irq_set_affinity = plda_msi_set_affinity,
-};
-
-static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
- unsigned int virq,
- unsigned int nr_irqs,
- void *args)
-{
- struct plda_pcie_rp *port = domain->host_data;
- struct plda_msi *msi = &port->msi;
- unsigned long bit;
-
- mutex_lock(&msi->lock);
- bit = find_first_zero_bit(msi->used, msi->num_vectors);
- if (bit >= msi->num_vectors) {
- mutex_unlock(&msi->lock);
- return -ENOSPC;
- }
-
- set_bit(bit, msi->used);
-
- irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
- domain->host_data, handle_edge_irq, NULL, NULL);
-
- mutex_unlock(&msi->lock);
-
- return 0;
-}
-
-static void plda_irq_msi_domain_free(struct irq_domain *domain,
- unsigned int virq,
- unsigned int nr_irqs)
-{
- struct irq_data *d = irq_domain_get_irq_data(domain, virq);
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
- struct plda_msi *msi = &port->msi;
-
- mutex_lock(&msi->lock);
-
- if (test_bit(d->hwirq, msi->used))
- __clear_bit(d->hwirq, msi->used);
- else
- dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
-
- mutex_unlock(&msi->lock);
-}
-
-static const struct irq_domain_ops msi_domain_ops = {
- .alloc = plda_irq_msi_domain_alloc,
- .free = plda_irq_msi_domain_free,
-};
-
-static struct irq_chip plda_msi_irq_chip = {
- .name = "PLDA PCIe MSI",
- .irq_ack = irq_chip_ack_parent,
- .irq_mask = pci_msi_mask_irq,
- .irq_unmask = pci_msi_unmask_irq,
-};
-
-static struct msi_domain_info plda_msi_domain_info = {
- .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
- MSI_FLAG_PCI_MSIX),
- .chip = &plda_msi_irq_chip,
-};
-
-static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
-{
- struct device *dev = port->dev;
- struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
- struct plda_msi *msi = &port->msi;
-
- mutex_init(&port->msi.lock);
-
- msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors,
- &msi_domain_ops, port);
- if (!msi->dev_domain) {
- dev_err(dev, "failed to create IRQ domain\n");
- return -ENOMEM;
- }
-
- msi->msi_domain = pci_msi_create_irq_domain(fwnode,
- &plda_msi_domain_info,
- msi->dev_domain);
- if (!msi->msi_domain) {
- dev_err(dev, "failed to create MSI domain\n");
- irq_domain_remove(msi->dev_domain);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void plda_handle_intx(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct device *dev = port->dev;
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long status;
- u32 bit;
- int ret;
-
- chained_irq_enter(chip, desc);
-
- status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
- if (status & PM_MSI_INT_INTX_MASK) {
- status &= PM_MSI_INT_INTX_MASK;
- status >>= PM_MSI_INT_INTX_SHIFT;
- for_each_set_bit(bit, &status, PCI_NUM_INTX) {
- ret = generic_handle_domain_irq(port->intx_domain, bit);
- if (ret)
- dev_err_ratelimited(dev, "bad INTx IRQ %d\n",
- bit);
- }
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static void plda_ack_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
-
- writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
-}
-
-static void plda_mask_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long flags;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
- u32 val;
-
- raw_spin_lock_irqsave(&port->lock, flags);
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val &= ~mask;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
- raw_spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void plda_unmask_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long flags;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
- u32 val;
-
- raw_spin_lock_irqsave(&port->lock, flags);
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val |= mask;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
- raw_spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static struct irq_chip plda_intx_irq_chip = {
- .name = "PLDA PCIe INTx",
- .irq_ack = plda_ack_intx_irq,
- .irq_mask = plda_mask_intx_irq,
- .irq_unmask = plda_unmask_intx_irq,
-};
-
-static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
- irq_set_chip_data(irq, domain->host_data);
-
- return 0;
-}
-
-static const struct irq_domain_ops intx_domain_ops = {
- .map = plda_pcie_intx_map,
-};
-
static inline u32 reg_to_event(u32 reg, struct event_map field)
{
return (reg & field.reg_mask) ? BIT(field.event_bit) : 0;
@@ -643,28 +404,6 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static irqreturn_t plda_event_handler(int irq, void *dev_id)
-{
- return IRQ_HANDLED;
-}
-
-static void plda_handle_event(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- unsigned long events;
- u32 bit;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- chained_irq_enter(chip, desc);
-
- events = port->event_ops->get_events(port);
-
- for_each_set_bit(bit, &events, port->num_events)
- generic_handle_domain_irq(port->event_domain, bit);
-
- chained_irq_exit(chip, desc);
-}
-
static void mc_ack_event_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
@@ -828,47 +567,6 @@ static const struct plda_event mc_event = {
.msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
-static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
- const struct irq_domain_ops *ops)
-{
- struct device *dev = port->dev;
- struct device_node *node = dev->of_node;
- struct device_node *pcie_intc_node;
-
- /* Setup INTx */
- pcie_intc_node = of_get_next_child(node, NULL);
- if (!pcie_intc_node) {
- dev_err(dev, "failed to find PCIe Intc node\n");
- return -EINVAL;
- }
-
- port->event_domain = irq_domain_add_linear(pcie_intc_node,
- port->num_events,
- &mc_event_domain_ops, port);
- if (!port->event_domain) {
- dev_err(dev, "failed to get event domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
- }
-
- irq_domain_update_bus_token(port->event_domain, DOMAIN_BUS_NEXUS);
-
- port->intx_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
- &intx_domain_ops, port);
- if (!port->intx_domain) {
- dev_err(dev, "failed to get an INTx IRQ domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
- }
-
- irq_domain_update_bus_token(port->intx_domain, DOMAIN_BUS_WIRED);
-
- of_node_put(pcie_intc_node);
- raw_spin_lock_init(&port->lock);
-
- return plda_allocate_msi_domains(port);
-}
-
static inline void mc_clear_secs(struct mc_pcie *port)
{
void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
@@ -929,76 +627,6 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int plda_init_interrupts(struct platform_device *pdev,
- struct plda_pcie_rp *port,
- const struct plda_event *event)
-{
- struct device *dev = &pdev->dev;
- int irq;
- int i, intx_irq, msi_irq, event_irq;
- int ret;
-
- if (!event->event_ops || !event->event_ops->get_events) {
- dev_err(dev, "no get events ops\n");
- return -EINVAL;
- }
-
- ret = plda_pcie_init_irq_domains(port, event->domain_ops);
- if (ret) {
- dev_err(dev, "failed creating IRQ domains\n");
- return ret;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -ENODEV;
-
- port->event_ops = event->event_ops;
-
- for (i = 0; i < port->num_events; i++) {
- event_irq = irq_create_mapping(port->event_domain, i);
- if (!event_irq) {
- dev_err(dev, "failed to map hwirq %d\n", i);
- return -ENXIO;
- }
-
- if (event->request_event_irq)
- ret = event->request_event_irq(port, event_irq, i);
- else
- ret = devm_request_irq(dev, event_irq,
- plda_event_handler,
- 0, NULL, port);
-
- if (ret) {
- dev_err(dev, "failed to request IRQ %d\n", event_irq);
- return ret;
- }
- }
-
- intx_irq = irq_create_mapping(port->event_domain,
- event->intx_event);
- if (!intx_irq) {
- dev_err(dev, "failed to map INTx interrupt\n");
- return -ENXIO;
- }
-
- /* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
-
- msi_irq = irq_create_mapping(port->event_domain,
- event->msi_event);
- if (!msi_irq)
- return -ENXIO;
-
- /* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
-
- /* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, plda_handle_event, port);
-
- return 0;
-}
-
static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index 19131181897f..e155d1d78627 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -18,6 +18,379 @@
#include "pcie-plda.h"
+static void plda_handle_msi(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct device *dev = port->dev;
+ struct plda_msi *msi = &port->msi;
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long status;
+ u32 bit;
+ int ret;
+
+ chained_irq_enter(chip, desc);
+
+ status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
+ if (status & PM_MSI_INT_MSI_MASK) {
+ writel_relaxed(status & PM_MSI_INT_MSI_MASK,
+ bridge_base_addr + ISTATUS_LOCAL);
+ status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
+ for_each_set_bit(bit, &status, msi->num_vectors) {
+ ret = generic_handle_domain_irq(msi->dev_domain, bit);
+ if (ret)
+ dev_err_ratelimited(dev, "bad MSI IRQ %d\n",
+ bit);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void plda_msi_bottom_irq_ack(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ u32 bitpos = data->hwirq;
+
+ writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
+}
+
+static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ phys_addr_t addr = port->msi.vector_phy;
+
+ msg->address_lo = lower_32_bits(addr);
+ msg->address_hi = upper_32_bits(addr);
+ msg->data = data->hwirq;
+
+ dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n",
+ (int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int plda_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
+{
+ return -EINVAL;
+}
+
+static struct irq_chip plda_msi_bottom_irq_chip = {
+ .name = "PLDA MSI",
+ .irq_ack = plda_msi_bottom_irq_ack,
+ .irq_compose_msi_msg = plda_compose_msi_msg,
+ .irq_set_affinity = plda_msi_set_affinity,
+};
+
+static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs,
+ void *args)
+{
+ struct plda_pcie_rp *port = domain->host_data;
+ struct plda_msi *msi = &port->msi;
+ unsigned long bit;
+
+ mutex_lock(&msi->lock);
+ bit = find_first_zero_bit(msi->used, msi->num_vectors);
+ if (bit >= msi->num_vectors) {
+ mutex_unlock(&msi->lock);
+ return -ENOSPC;
+ }
+
+ set_bit(bit, msi->used);
+
+ irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
+ domain->host_data, handle_edge_irq, NULL, NULL);
+
+ mutex_unlock(&msi->lock);
+
+ return 0;
+}
+
+static void plda_irq_msi_domain_free(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
+ struct plda_msi *msi = &port->msi;
+
+ mutex_lock(&msi->lock);
+
+ if (test_bit(d->hwirq, msi->used))
+ __clear_bit(d->hwirq, msi->used);
+ else
+ dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
+
+ mutex_unlock(&msi->lock);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+ .alloc = plda_irq_msi_domain_alloc,
+ .free = plda_irq_msi_domain_free,
+};
+
+static struct irq_chip plda_msi_irq_chip = {
+ .name = "PLDA PCIe MSI",
+ .irq_ack = irq_chip_ack_parent,
+ .irq_mask = pci_msi_mask_irq,
+ .irq_unmask = pci_msi_unmask_irq,
+};
+
+static struct msi_domain_info plda_msi_domain_info = {
+ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+ MSI_FLAG_PCI_MSIX),
+ .chip = &plda_msi_irq_chip,
+};
+
+static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
+{
+ struct device *dev = port->dev;
+ struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
+ struct plda_msi *msi = &port->msi;
+
+ mutex_init(&port->msi.lock);
+
+ msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors,
+ &msi_domain_ops, port);
+ if (!msi->dev_domain) {
+ dev_err(dev, "failed to create IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+ &plda_msi_domain_info,
+ msi->dev_domain);
+ if (!msi->msi_domain) {
+ dev_err(dev, "failed to create MSI domain\n");
+ irq_domain_remove(msi->dev_domain);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void plda_handle_intx(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct device *dev = port->dev;
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long status;
+ u32 bit;
+ int ret;
+
+ chained_irq_enter(chip, desc);
+
+ status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
+ if (status & PM_MSI_INT_INTX_MASK) {
+ status &= PM_MSI_INT_INTX_MASK;
+ status >>= PM_MSI_INT_INTX_SHIFT;
+ for_each_set_bit(bit, &status, PCI_NUM_INTX) {
+ ret = generic_handle_domain_irq(port->intx_domain, bit);
+ if (ret)
+ dev_err_ratelimited(dev, "bad INTx IRQ %d\n",
+ bit);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void plda_ack_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+
+ writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
+}
+
+static void plda_mask_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long flags;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+ u32 val;
+
+ raw_spin_lock_irqsave(&port->lock, flags);
+ val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
+ val &= ~mask;
+ writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
+ raw_spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void plda_unmask_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long flags;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+ u32 val;
+
+ raw_spin_lock_irqsave(&port->lock, flags);
+ val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
+ val |= mask;
+ writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
+ raw_spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct irq_chip plda_intx_irq_chip = {
+ .name = "PLDA PCIe INTx",
+ .irq_ack = plda_ack_intx_irq,
+ .irq_mask = plda_mask_intx_irq,
+ .irq_unmask = plda_unmask_intx_irq,
+};
+
+static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+ .map = plda_pcie_intx_map,
+};
+
+static irqreturn_t plda_event_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static void plda_handle_event(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ unsigned long events;
+ u32 bit;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
+
+ events = port->event_ops->get_events(port);
+
+ for_each_set_bit(bit, &events, port->num_events)
+ generic_handle_domain_irq(port->event_domain, bit);
+
+ chained_irq_exit(chip, desc);
+}
+
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port,
+ const struct irq_domain_ops *ops)
+{
+ struct device *dev = port->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *pcie_intc_node;
+
+ /* Setup INTx */
+ pcie_intc_node = of_get_next_child(node, NULL);
+ if (!pcie_intc_node) {
+ dev_err(dev, "failed to find PCIe Intc node\n");
+ return -EINVAL;
+ }
+
+ port->event_domain = irq_domain_add_linear(pcie_intc_node,
+ port->num_events,
+ ops, port);
+ if (!port->event_domain) {
+ dev_err(dev, "failed to get event domain\n");
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ irq_domain_update_bus_token(port->event_domain, DOMAIN_BUS_NEXUS);
+
+ port->intx_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
+ &intx_domain_ops, port);
+ if (!port->intx_domain) {
+ dev_err(dev, "failed to get an INTx IRQ domain\n");
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ irq_domain_update_bus_token(port->intx_domain, DOMAIN_BUS_WIRED);
+
+ of_node_put(pcie_intc_node);
+ raw_spin_lock_init(&port->lock);
+
+ return plda_allocate_msi_domains(port);
+}
+
+int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event)
+{
+ struct device *dev = &pdev->dev;
+ int irq;
+ int i, intx_irq, msi_irq, event_irq;
+ int ret;
+
+ if (!event->event_ops || !event->event_ops->get_events) {
+ dev_err(dev, "no get events ops\n");
+ return -EINVAL;
+ }
+
+ ret = plda_pcie_init_irq_domains(port, event->domain_ops);
+ if (ret) {
+ dev_err(dev, "failed creating IRQ domains\n");
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENODEV;
+
+ port->event_ops = event->event_ops;
+
+ for (i = 0; i < port->num_events; i++) {
+ event_irq = irq_create_mapping(port->event_domain, i);
+ if (!event_irq) {
+ dev_err(dev, "failed to map hwirq %d\n", i);
+ return -ENXIO;
+ }
+
+ if (event->request_event_irq)
+ ret = event->request_event_irq(port, event_irq, i);
+ else
+ ret = devm_request_irq(dev, event_irq,
+ plda_event_handler,
+ 0, NULL, port);
+
+ if (ret) {
+ dev_err(dev, "failed to request IRQ %d\n", event_irq);
+ return ret;
+ }
+ }
+
+ intx_irq = irq_create_mapping(port->event_domain,
+ event->intx_event);
+ if (!intx_irq) {
+ dev_err(dev, "failed to map INTx interrupt\n");
+ return -ENXIO;
+ }
+
+ /* Plug the INTx chained handler */
+ irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
+
+ msi_irq = irq_create_mapping(port->event_domain,
+ event->msi_event);
+ if (!msi_irq)
+ return -ENXIO;
+
+ /* Plug the MSI chained handler */
+ irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
+
+ /* Plug the main event chained handler */
+ irq_set_chained_handler_and_data(irq, plda_handle_event, port);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plda_init_interrupts);
+
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size)
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 820ea16855b5..ce7787aef4b7 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -137,6 +137,9 @@ struct plda_event {
int msi_event;
};
+int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event);
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size);
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 17/20] PCI: plda: Add event interrupt codes and host init/deinit functions
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
PLDA implements new codes and IRQ domain ops like PolarFire.
plda_get_events() adds interrupt register to event num mapping codes for
PLDA local event except DMA engine interrupt events. The DMA engine
interrupt events are implemented by vendors.
Add PLDA host init and deinit functions. So vendor can use it to init
PLDA PCIe host core.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
drivers/pci/controller/plda/pcie-plda-host.c | 230 +++++++++++++++++--
drivers/pci/controller/plda/pcie-plda.h | 49 ++++
2 files changed, 266 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index e155d1d78627..10ad26216505 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -3,6 +3,7 @@
* PLDA PCIe XpressRich host controller driver
*
* Copyright (C) 2023 Microchip Co. Ltd
+ * StarFive Co. Ltd
*
* Author: Daire McNamara <daire.mcnamara@microchip.com>
*/
@@ -18,6 +19,15 @@
#include "pcie-plda.h"
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct plda_pcie_rp *pcie = bus->sysdata;
+
+ return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
+
static void plda_handle_msi(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -262,6 +272,107 @@ static irqreturn_t plda_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static u32 plda_get_events(struct plda_pcie_rp *port)
+{
+ u32 events, val, origin;
+
+ origin = readl_relaxed(port->bridge_addr + ISTATUS_LOCAL);
+
+ /* Error events and doorbell events */
+ events = (origin & ERROR_AND_DOORBELL_MASK) >> A_ATR_EVT_POST_ERR_SHIFT;
+
+ /* INTx events */
+ if (origin & PM_MSI_INT_INTX_MASK)
+ events |= BIT(EVENT_PM_MSI_INT_INTX);
+
+ /* MSI event and sys events */
+ val = (origin & SYS_AND_MSI_MASK) >> PM_MSI_INT_MSI_SHIFT;
+ events |= val << EVENT_PM_MSI_INT_MSI;
+
+ return events;
+}
+
+static u32 plda_hwirq_to_mask(int hwirq)
+{
+ u32 mask;
+
+ if (hwirq < EVENT_PM_MSI_INT_INTX)
+ mask = BIT(hwirq + A_ATR_EVT_POST_ERR_SHIFT);
+ else if (hwirq == EVENT_PM_MSI_INT_INTX)
+ mask = PM_MSI_INT_INTX_MASK;
+ else
+ mask = BIT(hwirq + PM_MSI_TO_MASK_OFFSET);
+
+ return mask;
+}
+
+static void plda_ack_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+
+ writel_relaxed(plda_hwirq_to_mask(data->hwirq),
+ port->bridge_addr + ISTATUS_LOCAL);
+}
+
+static void plda_mask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val &= ~mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static void plda_unmask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val |= mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static struct irq_chip plda_event_irq_chip = {
+ .name = "PLDA PCIe EVENT",
+ .irq_ack = plda_ack_event_irq,
+ .irq_mask = plda_mask_event_irq,
+ .irq_unmask = plda_unmask_event_irq,
+};
+
+static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &plda_event_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops plda_evt_dom_ops = {
+ .map = plda_pcie_event_map,
+};
+
+static const struct plda_event_ops plda_event_ops = {
+ .get_events = plda_get_events,
+};
+
+static const struct plda_event plda_default_event = {
+ .domain_ops = &plda_evt_dom_ops,
+ .event_ops = &plda_event_ops,
+ .intx_event = EVENT_PM_MSI_INT_INTX,
+ .msi_event = EVENT_PM_MSI_INT_MSI
+};
+
static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -325,8 +436,7 @@ int plda_init_interrupts(struct platform_device *pdev,
const struct plda_event *event)
{
struct device *dev = &pdev->dev;
- int irq;
- int i, intx_irq, msi_irq, event_irq;
+ int i, event_irq;
int ret;
if (!event->event_ops || !event->event_ops->get_events) {
@@ -340,8 +450,8 @@ int plda_init_interrupts(struct platform_device *pdev,
return ret;
}
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ port->irq = platform_get_irq(pdev, 0);
+ if (port->irq < 0)
return -ENODEV;
port->event_ops = event->event_ops;
@@ -366,26 +476,26 @@ int plda_init_interrupts(struct platform_device *pdev,
}
}
- intx_irq = irq_create_mapping(port->event_domain,
- event->intx_event);
- if (!intx_irq) {
+ port->intx_irq = irq_create_mapping(port->event_domain,
+ event->intx_event);
+ if (!port->intx_irq) {
dev_err(dev, "failed to map INTx interrupt\n");
return -ENXIO;
}
/* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
+ irq_set_chained_handler_and_data(port->intx_irq, plda_handle_intx, port);
- msi_irq = irq_create_mapping(port->event_domain,
- event->msi_event);
- if (!msi_irq)
+ port->msi_irq = irq_create_mapping(port->event_domain,
+ event->msi_event);
+ if (!port->msi_irq)
return -ENXIO;
/* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
+ irq_set_chained_handler_and_data(port->msi_irq, plda_handle_msi, port);
/* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, plda_handle_event, port);
+ irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
return 0;
}
@@ -451,3 +561,97 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
return 0;
}
EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
+
+static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
+{
+ irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
+ irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
+ irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
+
+ irq_domain_remove(pcie->msi.msi_domain);
+ irq_domain_remove(pcie->msi.dev_domain);
+
+ irq_domain_remove(pcie->intx_domain);
+ irq_domain_remove(pcie->event_domain);
+}
+
+int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
+{
+ struct device *dev = port->dev;
+ struct pci_host_bridge *bridge;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *cfg_res;
+ int ret;
+
+ pdev = to_platform_device(dev);
+
+ port->bridge_addr =
+ devm_platform_ioremap_resource_byname(pdev, "apb");
+
+ if (IS_ERR(port->bridge_addr))
+ return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
+ "failed to map reg memory\n");
+
+ cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+ if (!cfg_res)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get config memory\n");
+
+ port->config_base = devm_ioremap_resource(dev, cfg_res);
+ if (IS_ERR(port->config_base))
+ return dev_err_probe(dev, PTR_ERR(port->config_base),
+ "failed to map config memory\n");
+
+ bridge = devm_pci_alloc_host_bridge(dev, 0);
+ if (!bridge)
+ return dev_err_probe(dev, -ENOMEM,
+ "failed to alloc bridge\n");
+
+ if (port->host_ops && port->host_ops->host_init) {
+ ret = port->host_ops->host_init(port);
+ if (ret)
+ return ret;
+ }
+
+ port->bridge = bridge;
+ plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
+ resource_size(cfg_res));
+ plda_pcie_setup_iomems(bridge, port);
+ plda_set_default_msi(&port->msi);
+ ret = plda_init_interrupts(pdev, port, &plda_default_event);
+ if (ret)
+ goto err_host;
+
+ /* Set default bus ops */
+ bridge->ops = ops;
+ bridge->sysdata = port;
+
+ ret = pci_host_probe(bridge);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "failed to probe pci host\n");
+ goto err_probe;
+ }
+
+ return ret;
+
+err_probe:
+ plda_pcie_irq_domain_deinit(port);
+err_host:
+ if (port->host_ops && port->host_ops->host_deinit)
+ port->host_ops->host_deinit(port);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_init);
+
+void plda_pcie_host_deinit(struct plda_pcie_rp *port)
+{
+ pci_stop_root_bus(port->bridge->bus);
+ pci_remove_root_bus(port->bridge->bus);
+
+ plda_pcie_irq_domain_deinit(port);
+
+ if (port->host_ops && port->host_ops->host_deinit)
+ port->host_ops->host_deinit(port);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index ce7787aef4b7..6b29bf1f5293 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -40,6 +40,7 @@
#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
#define P_ATR_EVT_DOORBELL_SHIFT 23
+#define ERROR_AND_DOORBELL_MASK GENMASK(23, 16)
#define PM_MSI_INT_INTA_MASK 0x01000000u
#define PM_MSI_INT_INTA_SHIFT 24
#define PM_MSI_INT_INTB_MASK 0x02000000u
@@ -58,6 +59,7 @@
#define PM_MSI_INT_EVENTS_SHIFT 30
#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
#define PM_MSI_INT_SYS_ERR_SHIFT 31
+#define SYS_AND_MSI_MASK GENMASK(31, 28)
#define NUM_LOCAL_EVENTS 15
#define ISTATUS_LOCAL 0x184
#define IMASK_HOST 0x188
@@ -102,12 +104,43 @@
#define EVENT_PM_MSI_INT_SYS_ERR 12
#define NUM_PLDA_EVENTS 13
+/*
+ * PLDA local interrupt register
+ *
+ * 31 27 23 15 7 0
+ * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
+ * |12|11|10|9| intx |7|6|5|4|3|2|1|0| DMA error | DMA end |
+ * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
+ * 0: AXI post error
+ * 1: AXI fetch error
+ * 2: AXI discard error
+ * 3: AXI doorbell
+ * 4: PCIe post error
+ * 5: PCIe fetch error
+ * 6: PCIe discard error
+ * 7: PCIe doorbell
+ * 8: 4 INTx interruts
+ * 9: MSI interrupt
+ * 10: AER event
+ * 11: PM/LTR/Hotplug
+ * 12: System error
+ * DMA error : reserved for vendor implement
+ * DMA end : reserved for vendor implement
+ */
+
+#define PM_MSI_TO_MASK_OFFSET 19
+
struct plda_pcie_rp;
struct plda_event_ops {
u32 (*get_events)(struct plda_pcie_rp *pcie);
};
+struct plda_pcie_host_ops {
+ int (*host_init)(struct plda_pcie_rp *pcie);
+ void (*host_deinit)(struct plda_pcie_rp *pcie);
+};
+
struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
@@ -119,12 +152,18 @@ struct plda_msi {
struct plda_pcie_rp {
struct device *dev;
+ struct pci_host_bridge *bridge;
struct irq_domain *intx_domain;
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct plda_msi msi;
const struct plda_event_ops *event_ops;
+ const struct plda_pcie_host_ops *host_ops;
void __iomem *bridge_addr;
+ void __iomem *config_base;
+ int irq;
+ int msi_irq;
+ int intx_irq;
int num_events;
};
@@ -137,6 +176,8 @@ struct plda_event {
int msi_event;
};
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where);
int plda_init_interrupts(struct platform_device *pdev,
struct plda_pcie_rp *port,
const struct plda_event *event);
@@ -145,4 +186,12 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
size_t size);
int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
struct plda_pcie_rp *port);
+int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
+void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
+
+static inline void plda_set_default_msi(struct plda_msi *msi)
+{
+ msi->vector_phy = IMSI_ADDR;
+ msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
+}
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 17/20] PCI: plda: Add event interrupt codes and host init/deinit functions
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
PLDA implements new codes and IRQ domain ops like PolarFire.
plda_get_events() adds interrupt register to event num mapping codes for
PLDA local event except DMA engine interrupt events. The DMA engine
interrupt events are implemented by vendors.
Add PLDA host init and deinit functions. So vendor can use it to init
PLDA PCIe host core.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
drivers/pci/controller/plda/pcie-plda-host.c | 230 +++++++++++++++++--
drivers/pci/controller/plda/pcie-plda.h | 49 ++++
2 files changed, 266 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index e155d1d78627..10ad26216505 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -3,6 +3,7 @@
* PLDA PCIe XpressRich host controller driver
*
* Copyright (C) 2023 Microchip Co. Ltd
+ * StarFive Co. Ltd
*
* Author: Daire McNamara <daire.mcnamara@microchip.com>
*/
@@ -18,6 +19,15 @@
#include "pcie-plda.h"
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct plda_pcie_rp *pcie = bus->sysdata;
+
+ return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
+
static void plda_handle_msi(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -262,6 +272,107 @@ static irqreturn_t plda_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static u32 plda_get_events(struct plda_pcie_rp *port)
+{
+ u32 events, val, origin;
+
+ origin = readl_relaxed(port->bridge_addr + ISTATUS_LOCAL);
+
+ /* Error events and doorbell events */
+ events = (origin & ERROR_AND_DOORBELL_MASK) >> A_ATR_EVT_POST_ERR_SHIFT;
+
+ /* INTx events */
+ if (origin & PM_MSI_INT_INTX_MASK)
+ events |= BIT(EVENT_PM_MSI_INT_INTX);
+
+ /* MSI event and sys events */
+ val = (origin & SYS_AND_MSI_MASK) >> PM_MSI_INT_MSI_SHIFT;
+ events |= val << EVENT_PM_MSI_INT_MSI;
+
+ return events;
+}
+
+static u32 plda_hwirq_to_mask(int hwirq)
+{
+ u32 mask;
+
+ if (hwirq < EVENT_PM_MSI_INT_INTX)
+ mask = BIT(hwirq + A_ATR_EVT_POST_ERR_SHIFT);
+ else if (hwirq == EVENT_PM_MSI_INT_INTX)
+ mask = PM_MSI_INT_INTX_MASK;
+ else
+ mask = BIT(hwirq + PM_MSI_TO_MASK_OFFSET);
+
+ return mask;
+}
+
+static void plda_ack_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+
+ writel_relaxed(plda_hwirq_to_mask(data->hwirq),
+ port->bridge_addr + ISTATUS_LOCAL);
+}
+
+static void plda_mask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val &= ~mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static void plda_unmask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val |= mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static struct irq_chip plda_event_irq_chip = {
+ .name = "PLDA PCIe EVENT",
+ .irq_ack = plda_ack_event_irq,
+ .irq_mask = plda_mask_event_irq,
+ .irq_unmask = plda_unmask_event_irq,
+};
+
+static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &plda_event_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops plda_evt_dom_ops = {
+ .map = plda_pcie_event_map,
+};
+
+static const struct plda_event_ops plda_event_ops = {
+ .get_events = plda_get_events,
+};
+
+static const struct plda_event plda_default_event = {
+ .domain_ops = &plda_evt_dom_ops,
+ .event_ops = &plda_event_ops,
+ .intx_event = EVENT_PM_MSI_INT_INTX,
+ .msi_event = EVENT_PM_MSI_INT_MSI
+};
+
static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -325,8 +436,7 @@ int plda_init_interrupts(struct platform_device *pdev,
const struct plda_event *event)
{
struct device *dev = &pdev->dev;
- int irq;
- int i, intx_irq, msi_irq, event_irq;
+ int i, event_irq;
int ret;
if (!event->event_ops || !event->event_ops->get_events) {
@@ -340,8 +450,8 @@ int plda_init_interrupts(struct platform_device *pdev,
return ret;
}
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ port->irq = platform_get_irq(pdev, 0);
+ if (port->irq < 0)
return -ENODEV;
port->event_ops = event->event_ops;
@@ -366,26 +476,26 @@ int plda_init_interrupts(struct platform_device *pdev,
}
}
- intx_irq = irq_create_mapping(port->event_domain,
- event->intx_event);
- if (!intx_irq) {
+ port->intx_irq = irq_create_mapping(port->event_domain,
+ event->intx_event);
+ if (!port->intx_irq) {
dev_err(dev, "failed to map INTx interrupt\n");
return -ENXIO;
}
/* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
+ irq_set_chained_handler_and_data(port->intx_irq, plda_handle_intx, port);
- msi_irq = irq_create_mapping(port->event_domain,
- event->msi_event);
- if (!msi_irq)
+ port->msi_irq = irq_create_mapping(port->event_domain,
+ event->msi_event);
+ if (!port->msi_irq)
return -ENXIO;
/* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
+ irq_set_chained_handler_and_data(port->msi_irq, plda_handle_msi, port);
/* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, plda_handle_event, port);
+ irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
return 0;
}
@@ -451,3 +561,97 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
return 0;
}
EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
+
+static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
+{
+ irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
+ irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
+ irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
+
+ irq_domain_remove(pcie->msi.msi_domain);
+ irq_domain_remove(pcie->msi.dev_domain);
+
+ irq_domain_remove(pcie->intx_domain);
+ irq_domain_remove(pcie->event_domain);
+}
+
+int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops)
+{
+ struct device *dev = port->dev;
+ struct pci_host_bridge *bridge;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *cfg_res;
+ int ret;
+
+ pdev = to_platform_device(dev);
+
+ port->bridge_addr =
+ devm_platform_ioremap_resource_byname(pdev, "apb");
+
+ if (IS_ERR(port->bridge_addr))
+ return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
+ "failed to map reg memory\n");
+
+ cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+ if (!cfg_res)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get config memory\n");
+
+ port->config_base = devm_ioremap_resource(dev, cfg_res);
+ if (IS_ERR(port->config_base))
+ return dev_err_probe(dev, PTR_ERR(port->config_base),
+ "failed to map config memory\n");
+
+ bridge = devm_pci_alloc_host_bridge(dev, 0);
+ if (!bridge)
+ return dev_err_probe(dev, -ENOMEM,
+ "failed to alloc bridge\n");
+
+ if (port->host_ops && port->host_ops->host_init) {
+ ret = port->host_ops->host_init(port);
+ if (ret)
+ return ret;
+ }
+
+ port->bridge = bridge;
+ plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
+ resource_size(cfg_res));
+ plda_pcie_setup_iomems(bridge, port);
+ plda_set_default_msi(&port->msi);
+ ret = plda_init_interrupts(pdev, port, &plda_default_event);
+ if (ret)
+ goto err_host;
+
+ /* Set default bus ops */
+ bridge->ops = ops;
+ bridge->sysdata = port;
+
+ ret = pci_host_probe(bridge);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "failed to probe pci host\n");
+ goto err_probe;
+ }
+
+ return ret;
+
+err_probe:
+ plda_pcie_irq_domain_deinit(port);
+err_host:
+ if (port->host_ops && port->host_ops->host_deinit)
+ port->host_ops->host_deinit(port);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_init);
+
+void plda_pcie_host_deinit(struct plda_pcie_rp *port)
+{
+ pci_stop_root_bus(port->bridge->bus);
+ pci_remove_root_bus(port->bridge->bus);
+
+ plda_pcie_irq_domain_deinit(port);
+
+ if (port->host_ops && port->host_ops->host_deinit)
+ port->host_ops->host_deinit(port);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index ce7787aef4b7..6b29bf1f5293 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -40,6 +40,7 @@
#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
#define P_ATR_EVT_DOORBELL_SHIFT 23
+#define ERROR_AND_DOORBELL_MASK GENMASK(23, 16)
#define PM_MSI_INT_INTA_MASK 0x01000000u
#define PM_MSI_INT_INTA_SHIFT 24
#define PM_MSI_INT_INTB_MASK 0x02000000u
@@ -58,6 +59,7 @@
#define PM_MSI_INT_EVENTS_SHIFT 30
#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
#define PM_MSI_INT_SYS_ERR_SHIFT 31
+#define SYS_AND_MSI_MASK GENMASK(31, 28)
#define NUM_LOCAL_EVENTS 15
#define ISTATUS_LOCAL 0x184
#define IMASK_HOST 0x188
@@ -102,12 +104,43 @@
#define EVENT_PM_MSI_INT_SYS_ERR 12
#define NUM_PLDA_EVENTS 13
+/*
+ * PLDA local interrupt register
+ *
+ * 31 27 23 15 7 0
+ * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
+ * |12|11|10|9| intx |7|6|5|4|3|2|1|0| DMA error | DMA end |
+ * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
+ * 0: AXI post error
+ * 1: AXI fetch error
+ * 2: AXI discard error
+ * 3: AXI doorbell
+ * 4: PCIe post error
+ * 5: PCIe fetch error
+ * 6: PCIe discard error
+ * 7: PCIe doorbell
+ * 8: 4 INTx interruts
+ * 9: MSI interrupt
+ * 10: AER event
+ * 11: PM/LTR/Hotplug
+ * 12: System error
+ * DMA error : reserved for vendor implement
+ * DMA end : reserved for vendor implement
+ */
+
+#define PM_MSI_TO_MASK_OFFSET 19
+
struct plda_pcie_rp;
struct plda_event_ops {
u32 (*get_events)(struct plda_pcie_rp *pcie);
};
+struct plda_pcie_host_ops {
+ int (*host_init)(struct plda_pcie_rp *pcie);
+ void (*host_deinit)(struct plda_pcie_rp *pcie);
+};
+
struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
@@ -119,12 +152,18 @@ struct plda_msi {
struct plda_pcie_rp {
struct device *dev;
+ struct pci_host_bridge *bridge;
struct irq_domain *intx_domain;
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct plda_msi msi;
const struct plda_event_ops *event_ops;
+ const struct plda_pcie_host_ops *host_ops;
void __iomem *bridge_addr;
+ void __iomem *config_base;
+ int irq;
+ int msi_irq;
+ int intx_irq;
int num_events;
};
@@ -137,6 +176,8 @@ struct plda_event {
int msi_event;
};
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where);
int plda_init_interrupts(struct platform_device *pdev,
struct plda_pcie_rp *port,
const struct plda_event *event);
@@ -145,4 +186,12 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
size_t size);
int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
struct plda_pcie_rp *port);
+int plda_pcie_host_init(struct plda_pcie_rp *pcie, struct pci_ops *ops);
+void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
+
+static inline void plda_set_default_msi(struct plda_msi *msi)
+{
+ msi->vector_phy = IMSI_ADDR;
+ msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
+}
#endif
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 18/20] dt-bindings: PCI: Add StarFive JH7110 PCIe controller
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 using PLDA
XpressRICH PCIe host controller IP.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
new file mode 100644
index 000000000000..67151aaa3948
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PCIe host controller
+
+maintainers:
+ - Kevin Xie <kevin.xie@starfivetech.com>
+
+allOf:
+ - $ref: plda,xpressrich3-axi-common.yaml#
+
+properties:
+ compatible:
+ const: starfive,jh7110-pcie
+
+ clocks:
+ items:
+ - description: NOC bus clock
+ - description: Transport layer clock
+ - description: AXI MST0 clock
+ - description: APB clock
+
+ clock-names:
+ items:
+ - const: noc
+ - const: tl
+ - const: axi_mst0
+ - const: apb
+
+ resets:
+ items:
+ - description: AXI MST0 reset
+ - description: AXI SLAVE0 reset
+ - description: AXI SLAVE reset
+ - description: PCIE BRIDGE reset
+ - description: PCIE CORE reset
+ - description: PCIE APB reset
+
+ reset-names:
+ items:
+ - const: mst0
+ - const: slv0
+ - const: slv
+ - const: brg
+ - const: core
+ - const: apb
+
+ starfive,stg-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ The phandle to System Register Controller syscon node.
+
+ perst-gpios:
+ description: GPIO controlled connection to PERST# signal
+ maxItems: 1
+
+ phys:
+ description:
+ Specified PHY is attached to PCIe controller.
+ maxItems: 1
+
+required:
+ - clocks
+ - resets
+ - starfive,stg-syscon
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@940000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0x40000000 0x0 0x10000000>,
+ <0x0 0x2b000000 0x0 0x1000000>;
+ reg-names = "cfg", "apb";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ interrupt-parent = <&plic>;
+ interrupts = <56>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+ msi-controller;
+ clocks = <&syscrg 86>,
+ <&stgcrg 10>,
+ <&stgcrg 8>,
+ <&stgcrg 9>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg 11>,
+ <&stgcrg 12>,
+ <&stgcrg 13>,
+ <&stgcrg 14>,
+ <&stgcrg 15>,
+ <&stgcrg 16>;
+ perst-gpios = <&gpios 26 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy0>;
+
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 18/20] dt-bindings: PCI: Add StarFive JH7110 PCIe controller
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 using PLDA
XpressRICH PCIe host controller IP.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
new file mode 100644
index 000000000000..67151aaa3948
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PCIe host controller
+
+maintainers:
+ - Kevin Xie <kevin.xie@starfivetech.com>
+
+allOf:
+ - $ref: plda,xpressrich3-axi-common.yaml#
+
+properties:
+ compatible:
+ const: starfive,jh7110-pcie
+
+ clocks:
+ items:
+ - description: NOC bus clock
+ - description: Transport layer clock
+ - description: AXI MST0 clock
+ - description: APB clock
+
+ clock-names:
+ items:
+ - const: noc
+ - const: tl
+ - const: axi_mst0
+ - const: apb
+
+ resets:
+ items:
+ - description: AXI MST0 reset
+ - description: AXI SLAVE0 reset
+ - description: AXI SLAVE reset
+ - description: PCIE BRIDGE reset
+ - description: PCIE CORE reset
+ - description: PCIE APB reset
+
+ reset-names:
+ items:
+ - const: mst0
+ - const: slv0
+ - const: slv
+ - const: brg
+ - const: core
+ - const: apb
+
+ starfive,stg-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ The phandle to System Register Controller syscon node.
+
+ perst-gpios:
+ description: GPIO controlled connection to PERST# signal
+ maxItems: 1
+
+ phys:
+ description:
+ Specified PHY is attached to PCIe controller.
+ maxItems: 1
+
+required:
+ - clocks
+ - resets
+ - starfive,stg-syscon
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@940000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0x40000000 0x0 0x10000000>,
+ <0x0 0x2b000000 0x0 0x1000000>;
+ reg-names = "cfg", "apb";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ interrupt-parent = <&plic>;
+ interrupts = <56>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+ msi-controller;
+ clocks = <&syscrg 86>,
+ <&stgcrg 10>,
+ <&stgcrg 8>,
+ <&stgcrg 9>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg 11>,
+ <&stgcrg 12>,
+ <&stgcrg 13>,
+ <&stgcrg 14>,
+ <&stgcrg 15>,
+ <&stgcrg 16>;
+ perst-gpios = <&gpios 26 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy0>;
+
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
with PLDA host PCIe core.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
---
MAINTAINERS | 7 +
drivers/pci/controller/plda/Kconfig | 11 +
drivers/pci/controller/plda/Makefile | 1 +
drivers/pci/controller/plda/pcie-plda.h | 71 ++-
drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
drivers/pci/pci.h | 7 +
6 files changed, 556 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 4c08d9354dff..fd4f4f06c069 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16876,6 +16876,13 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
F: drivers/pci/controller/dwc/pcie-uniphier*
+PCIE DRIVER FOR STARFIVE JH71x0
+M: Kevin Xie <kevin.xie@starfivetech.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/starfive*
+F: drivers/pci/controller/plda/pcie-starfive.c
+
PCIE DRIVER FOR ST SPEAR13XX
M: Pratyush Anand <pratyush.anand@gmail.com>
L: linux-pci@vger.kernel.org
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index e54a82ee94f5..f0791bc6d9f5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -15,4 +15,15 @@ config PCIE_MICROCHIP_HOST
Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver.
+config PCIE_STARFIVE_HOST
+ tristate "StarFive PCIe host controller"
+ depends on OF && PCI_MSI
+ select PCIE_PLDA_HOST
+ help
+ Say Y here if you want to support the StarFive PCIe controller in
+ host mode. StarFive PCIe controller uses PLDA PCIe core.
+
+ If you choose to build this driver as module it will be dynamically
+ linked and module will be called pcie-starfive.ko.
+
endmenu
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index 4340ab007f44..0ac6851bed48 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
+obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 6b29bf1f5293..80dbd34d2d51 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -10,10 +10,20 @@
#define PLDA_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy Regs */
+#define GEN_SETTINGS 0x80
+#define RP_ENABLE 1
+#define PCIE_PCI_IDS_DW1 0x9c
+#define IDS_CLASS_CODE_SHIFT 16
+#define REVISION_ID_MASK GENMASK(7, 0)
+#define CLASS_CODE_ID_MASK GENMASK(31, 8)
#define PCIE_PCI_IRQ_DW0 0xa8
#define MSIX_CAP_MASK BIT(31)
#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
#define NUM_MSI_MSGS_SHIFT 4
+#define PCI_MISC 0xb4
+#define PHY_FUNCTION_DIS BIT(15)
+#define PCIE_WINROM 0xfc
+#define PREF_MEM_WIN_64_SUPPORT BIT(3)
#define IMASK_LOCAL 0x180
#define DMA_END_ENGINE_0_MASK 0x00000000u
@@ -66,6 +76,8 @@
#define ISTATUS_HOST 0x18c
#define IMSI_ADDR 0x190
#define ISTATUS_MSI 0x194
+#define PMSG_SUPPORT_RX 0x3f0
+#define PMSG_LTR_SUPPORT BIT(2)
/* PCIe Master table init defines */
#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
@@ -87,6 +99,8 @@
#define PCIE_TX_RX_INTERFACE 0x00000000u
#define PCIE_CONFIG_INTERFACE 0x00000001u
+#define CONFIG_SPACE_ADDR_OFFSET 0x1000u
+
#define ATR_ENTRY_SIZE 32
#define EVENT_A_ATR_EVT_POST_ERR 0
@@ -194,4 +208,59 @@ static inline void plda_set_default_msi(struct plda_msi *msi)
msi->vector_phy = IMSI_ADDR;
msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
}
-#endif
+
+static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
+ value |= RP_ENABLE;
+ writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
+}
+
+static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ /* set class code and reserve revision id */
+ value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
+ value &= REVISION_ID_MASK;
+ value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
+ writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
+}
+
+static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
+ value |= PREF_MEM_WIN_64_SUPPORT;
+ writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
+}
+
+static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
+ value &= ~PMSG_LTR_SUPPORT;
+ writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
+}
+
+static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PCI_MISC);
+ value |= PHY_FUNCTION_DIS;
+ writel_relaxed(value, plda->bridge_addr + PCI_MISC);
+}
+
+static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
+{
+ void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR_OFFSET;
+
+ writel_relaxed(lower_32_bits(val), addr + PCI_BASE_ADDRESS_0);
+ writel_relaxed(upper_32_bits(val), addr + PCI_BASE_ADDRESS_1);
+}
+#endif /* _PCIE_PLDA_H */
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
new file mode 100644
index 000000000000..c0673faac312
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCIe host controller driver for StarFive JH7110 Soc.
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "../../pci.h"
+
+#include "pcie-plda.h"
+
+#define PCIE_FUNC_NUM 4
+
+/* system control */
+#define STG_SYSCON_PCIE0_BASE 0x48
+#define STG_SYSCON_PCIE1_BASE 0x1f8
+
+#define STG_SYSCON_AR_OFFSET 0x78
+#define STG_SYSCON_AXI4_SLVL_AR_MASK GENMASK(22, 8)
+#define STG_SYSCON_AXI4_SLVL_PHY_AR(x) FIELD_PREP(GENMASK(20, 17), x)
+#define STG_SYSCON_AW_OFFSET 0x7c
+#define STG_SYSCON_AXI4_SLVL_AW_MASK GENMASK(14, 0)
+#define STG_SYSCON_AXI4_SLVL_PHY_AW(x) FIELD_PREP(GENMASK(12, 9), x)
+#define STG_SYSCON_CLKREQ BIT(22)
+#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
+#define STG_SYSCON_RP_NEP_OFFSET 0xe8
+#define STG_SYSCON_K_RP_NEP BIT(8)
+#define STG_SYSCON_LNKSTA_OFFSET 0x170
+#define DATA_LINK_ACTIVE BIT(5)
+
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP_MIN 90000
+#define LINK_WAIT_USLEEP_MAX 100000
+
+struct starfive_jh7110_pcie {
+ struct plda_pcie_rp plda;
+ struct reset_control *resets;
+ struct clk_bulk_data *clks;
+ struct regmap *reg_syscon;
+ struct gpio_desc *power_gpio;
+ struct gpio_desc *reset_gpio;
+ struct phy *phy;
+
+ unsigned int stg_pcie_base;
+ int num_clks;
+};
+
+/*
+ * The BAR0/1 of bridge should be hidden during enumeration to
+ * avoid the sizing and resource allocation by PCIe core.
+ */
+static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
+ int offset)
+{
+ if (pci_is_root_bus(bus) && !devfn &&
+ (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
+ return true;
+
+ return false;
+}
+
+static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ if (starfive_pcie_hide_rc_bar(bus, devfn, where))
+ return PCIBIOS_SUCCESSFUL;
+
+ return pci_generic_config_write(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ if (starfive_pcie_hide_rc_bar(bus, devfn, where)) {
+ *value = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ return pci_generic_config_read(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
+ struct device *dev)
+{
+ int domain_nr;
+
+ pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
+ if (pcie->num_clks < 0)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get pcie clocks\n");
+
+ pcie->resets = devm_reset_control_array_get_exclusive(dev);
+ if (IS_ERR(pcie->resets))
+ return dev_err_probe(dev, PTR_ERR(pcie->resets),
+ "failed to get pcie resets");
+
+ pcie->reg_syscon =
+ syscon_regmap_lookup_by_phandle(dev->of_node,
+ "starfive,stg-syscon");
+
+ if (IS_ERR(pcie->reg_syscon))
+ return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
+ "failed to parse starfive,stg-syscon\n");
+
+ pcie->phy = devm_phy_optional_get(dev, NULL);
+ if (IS_ERR(pcie->phy))
+ return dev_err_probe(dev, PTR_ERR(pcie->phy),
+ "failed to get pcie phy\n");
+
+ domain_nr = of_get_pci_domain_nr(dev->of_node);
+
+ if (domain_nr < 0 || domain_nr > 1)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get valid pcie domain\n");
+
+ if (domain_nr == 0)
+ pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
+ else
+ pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
+
+ pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(pcie->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
+ "failed to get perst-gpio\n");
+
+ pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pcie->power_gpio))
+ return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
+ "failed to get power-gpio\n");
+
+ return 0;
+}
+
+static struct pci_ops starfive_pcie_ops = {
+ .map_bus = plda_pcie_map_bus,
+ .read = starfive_pcie_config_read,
+ .write = starfive_pcie_config_write,
+};
+
+static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
+{
+ struct device *dev = pcie->plda.dev;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable clocks\n");
+
+ ret = reset_control_deassert(pcie->resets);
+ if (ret) {
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+ dev_err_probe(dev, ret, "failed to deassert resets\n");
+ }
+
+ return ret;
+}
+
+static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
+{
+ reset_control_assert(pcie->resets);
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+}
+
+static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+ int ret;
+ u32 stg_reg_val;
+
+ ret = regmap_read(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET,
+ &stg_reg_val);
+ if (ret) {
+ dev_err(pcie->plda.dev, "failed to read link status\n");
+ return false;
+ }
+
+ return !!(stg_reg_val & DATA_LINK_ACTIVE);
+}
+
+static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
+{
+ int retries;
+
+ /* Check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (starfive_pcie_link_up(&pcie->plda)) {
+ dev_info(pcie->plda.dev, "port link up\n");
+ return 0;
+ }
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int starfive_pcie_enable_phy(struct device *dev,
+ struct starfive_jh7110_pcie *pcie)
+{
+ int ret;
+
+ if (!pcie->phy)
+ return 0;
+
+ ret = phy_init(pcie->phy);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to initialize pcie phy\n");
+
+ ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to set pcie mode\n");
+ goto err_phy_on;
+ }
+
+ ret = phy_power_on(pcie->phy);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to power on pcie phy\n");
+ goto err_phy_on;
+ }
+
+ return 0;
+
+err_phy_on:
+ phy_exit(pcie->phy);
+ return ret;
+}
+
+static void starfive_pcie_disable_phy(struct starfive_jh7110_pcie *pcie)
+{
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+}
+
+static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+
+ starfive_pcie_clk_rst_deinit(pcie);
+ if (pcie->power_gpio)
+ gpiod_set_value_cansleep(pcie->power_gpio, 0);
+ starfive_pcie_disable_phy(pcie);
+}
+
+static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+ struct device *dev = plda->dev;
+ int ret;
+ int i;
+
+ ret = starfive_pcie_enable_phy(dev, pcie);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET,
+ STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_CKREF_SRC_MASK,
+ FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
+
+ ret = starfive_pcie_clk_rst_init(pcie);
+ if (ret)
+ return ret;
+
+ if (pcie->power_gpio)
+ gpiod_set_value_cansleep(pcie->power_gpio, 1);
+
+ if (pcie->reset_gpio)
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+
+ /* Disable physical functions except #0 */
+ for (i = 1; i < PCIE_FUNC_NUM; i++) {
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AR_MASK,
+ STG_SYSCON_AXI4_SLVL_PHY_AR(i));
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AW_MASK,
+ STG_SYSCON_AXI4_SLVL_PHY_AW(i));
+
+ plda_pcie_disable_func(plda);
+ }
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AR_MASK, 0);
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AW_MASK, 0);
+
+ plda_pcie_enable_root_port(plda);
+ plda_pcie_write_rc_bar(plda, 0);
+
+ /* PCIe PCI Standard Configuration Identification Settings. */
+ plda_pcie_set_standard_class(plda);
+
+ /*
+ * The LTR message forwarding of PCIe Message Reception was set by core
+ * as default, but the forward id & addr are also need to be reset.
+ * If we do not disable LTR message forwarding here, or set a legal
+ * forwarding address, the kernel will get stuck after the driver probe.
+ * To workaround, disable the LTR message forwarding support on
+ * PCIe Message Reception.
+ */
+ plda_pcie_disable_ltr(plda);
+
+ /* Prefetchable memory window 64-bit addressing support */
+ plda_pcie_set_pref_win_64bit(plda);
+
+ /*
+ * Ensure that PERST has been asserted for at least 100 ms,
+ * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
+ */
+ msleep(100);
+ if (pcie->reset_gpio)
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+
+ /*
+ * With a Downstream Port (<=5GT/s), software must wait a minimum
+ * of 100ms following exit from a conventional reset before
+ * sending a configuration request to the device.
+ */
+ msleep(PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS);
+
+ if (starfive_pcie_host_wait_for_link(pcie))
+ dev_info(dev, "port link down\n");
+
+ return 0;
+}
+
+static const struct plda_pcie_host_ops sf_host_ops = {
+ .host_init = starfive_pcie_host_init,
+ .host_deinit = starfive_pcie_host_deinit,
+};
+
+static int starfive_pcie_probe(struct platform_device *pdev)
+{
+ struct starfive_jh7110_pcie *pcie;
+ struct device *dev = &pdev->dev;
+ struct plda_pcie_rp *plda;
+ int ret;
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ plda = &pcie->plda;
+ plda->dev = dev;
+
+ ret = starfive_pcie_parse_dt(pcie, dev);
+ if (ret)
+ return ret;
+
+ plda->host_ops = &sf_host_ops;
+ plda->num_events = NUM_PLDA_EVENTS;
+ ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+ platform_set_drvdata(pdev, pcie);
+
+ return 0;
+}
+
+static void starfive_pcie_remove(struct platform_device *pdev)
+{
+ struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
+
+ plda_pcie_host_deinit(&pcie->plda);
+ platform_set_drvdata(pdev, NULL);
+}
+
+static int starfive_pcie_suspend_noirq(struct device *dev)
+{
+ struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+ starfive_pcie_disable_phy(pcie);
+
+ return 0;
+}
+
+static int starfive_pcie_resume_noirq(struct device *dev)
+{
+ struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+ int ret;
+
+ ret = starfive_pcie_enable_phy(dev, pcie);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+ if (ret) {
+ dev_err(dev, "failed to enable clocks\n");
+ starfive_pcie_disable_phy(pcie);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops starfive_pcie_pm_ops = {
+ NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
+ starfive_pcie_resume_noirq)
+};
+
+static const struct of_device_id starfive_pcie_of_match[] = {
+ { .compatible = "starfive,jh7110-pcie", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
+
+static struct platform_driver starfive_pcie_driver = {
+ .driver = {
+ .name = "pcie-starfive",
+ .of_match_table = of_match_ptr(starfive_pcie_of_match),
+ .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
+ },
+ .probe = starfive_pcie_probe,
+ .remove_new = starfive_pcie_remove,
+};
+module_platform_driver(starfive_pcie_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 5ecbcf041179..7b35c06d05b5 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -22,6 +22,13 @@
*/
#define PCIE_PME_TO_L2_TIMEOUT_US 10000
+/*
+ * PCIe r6.0, sec 6.6.1, <Conventional Reset>
+ * Requires a minimum waiting of 100ms before sending a configuration
+ * request to the device.
+ */
+#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
+
extern const unsigned char pcie_link_speed[];
extern bool pci_early_dump;
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
with PLDA host PCIe core.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
---
MAINTAINERS | 7 +
drivers/pci/controller/plda/Kconfig | 11 +
drivers/pci/controller/plda/Makefile | 1 +
drivers/pci/controller/plda/pcie-plda.h | 71 ++-
drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
drivers/pci/pci.h | 7 +
6 files changed, 556 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 4c08d9354dff..fd4f4f06c069 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16876,6 +16876,13 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
F: drivers/pci/controller/dwc/pcie-uniphier*
+PCIE DRIVER FOR STARFIVE JH71x0
+M: Kevin Xie <kevin.xie@starfivetech.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/starfive*
+F: drivers/pci/controller/plda/pcie-starfive.c
+
PCIE DRIVER FOR ST SPEAR13XX
M: Pratyush Anand <pratyush.anand@gmail.com>
L: linux-pci@vger.kernel.org
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index e54a82ee94f5..f0791bc6d9f5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -15,4 +15,15 @@ config PCIE_MICROCHIP_HOST
Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver.
+config PCIE_STARFIVE_HOST
+ tristate "StarFive PCIe host controller"
+ depends on OF && PCI_MSI
+ select PCIE_PLDA_HOST
+ help
+ Say Y here if you want to support the StarFive PCIe controller in
+ host mode. StarFive PCIe controller uses PLDA PCIe core.
+
+ If you choose to build this driver as module it will be dynamically
+ linked and module will be called pcie-starfive.ko.
+
endmenu
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index 4340ab007f44..0ac6851bed48 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
+obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 6b29bf1f5293..80dbd34d2d51 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -10,10 +10,20 @@
#define PLDA_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy Regs */
+#define GEN_SETTINGS 0x80
+#define RP_ENABLE 1
+#define PCIE_PCI_IDS_DW1 0x9c
+#define IDS_CLASS_CODE_SHIFT 16
+#define REVISION_ID_MASK GENMASK(7, 0)
+#define CLASS_CODE_ID_MASK GENMASK(31, 8)
#define PCIE_PCI_IRQ_DW0 0xa8
#define MSIX_CAP_MASK BIT(31)
#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
#define NUM_MSI_MSGS_SHIFT 4
+#define PCI_MISC 0xb4
+#define PHY_FUNCTION_DIS BIT(15)
+#define PCIE_WINROM 0xfc
+#define PREF_MEM_WIN_64_SUPPORT BIT(3)
#define IMASK_LOCAL 0x180
#define DMA_END_ENGINE_0_MASK 0x00000000u
@@ -66,6 +76,8 @@
#define ISTATUS_HOST 0x18c
#define IMSI_ADDR 0x190
#define ISTATUS_MSI 0x194
+#define PMSG_SUPPORT_RX 0x3f0
+#define PMSG_LTR_SUPPORT BIT(2)
/* PCIe Master table init defines */
#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
@@ -87,6 +99,8 @@
#define PCIE_TX_RX_INTERFACE 0x00000000u
#define PCIE_CONFIG_INTERFACE 0x00000001u
+#define CONFIG_SPACE_ADDR_OFFSET 0x1000u
+
#define ATR_ENTRY_SIZE 32
#define EVENT_A_ATR_EVT_POST_ERR 0
@@ -194,4 +208,59 @@ static inline void plda_set_default_msi(struct plda_msi *msi)
msi->vector_phy = IMSI_ADDR;
msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
}
-#endif
+
+static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
+ value |= RP_ENABLE;
+ writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
+}
+
+static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ /* set class code and reserve revision id */
+ value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
+ value &= REVISION_ID_MASK;
+ value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
+ writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
+}
+
+static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
+ value |= PREF_MEM_WIN_64_SUPPORT;
+ writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
+}
+
+static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
+ value &= ~PMSG_LTR_SUPPORT;
+ writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
+}
+
+static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PCI_MISC);
+ value |= PHY_FUNCTION_DIS;
+ writel_relaxed(value, plda->bridge_addr + PCI_MISC);
+}
+
+static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
+{
+ void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR_OFFSET;
+
+ writel_relaxed(lower_32_bits(val), addr + PCI_BASE_ADDRESS_0);
+ writel_relaxed(upper_32_bits(val), addr + PCI_BASE_ADDRESS_1);
+}
+#endif /* _PCIE_PLDA_H */
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
new file mode 100644
index 000000000000..c0673faac312
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCIe host controller driver for StarFive JH7110 Soc.
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "../../pci.h"
+
+#include "pcie-plda.h"
+
+#define PCIE_FUNC_NUM 4
+
+/* system control */
+#define STG_SYSCON_PCIE0_BASE 0x48
+#define STG_SYSCON_PCIE1_BASE 0x1f8
+
+#define STG_SYSCON_AR_OFFSET 0x78
+#define STG_SYSCON_AXI4_SLVL_AR_MASK GENMASK(22, 8)
+#define STG_SYSCON_AXI4_SLVL_PHY_AR(x) FIELD_PREP(GENMASK(20, 17), x)
+#define STG_SYSCON_AW_OFFSET 0x7c
+#define STG_SYSCON_AXI4_SLVL_AW_MASK GENMASK(14, 0)
+#define STG_SYSCON_AXI4_SLVL_PHY_AW(x) FIELD_PREP(GENMASK(12, 9), x)
+#define STG_SYSCON_CLKREQ BIT(22)
+#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
+#define STG_SYSCON_RP_NEP_OFFSET 0xe8
+#define STG_SYSCON_K_RP_NEP BIT(8)
+#define STG_SYSCON_LNKSTA_OFFSET 0x170
+#define DATA_LINK_ACTIVE BIT(5)
+
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP_MIN 90000
+#define LINK_WAIT_USLEEP_MAX 100000
+
+struct starfive_jh7110_pcie {
+ struct plda_pcie_rp plda;
+ struct reset_control *resets;
+ struct clk_bulk_data *clks;
+ struct regmap *reg_syscon;
+ struct gpio_desc *power_gpio;
+ struct gpio_desc *reset_gpio;
+ struct phy *phy;
+
+ unsigned int stg_pcie_base;
+ int num_clks;
+};
+
+/*
+ * The BAR0/1 of bridge should be hidden during enumeration to
+ * avoid the sizing and resource allocation by PCIe core.
+ */
+static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
+ int offset)
+{
+ if (pci_is_root_bus(bus) && !devfn &&
+ (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
+ return true;
+
+ return false;
+}
+
+static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ if (starfive_pcie_hide_rc_bar(bus, devfn, where))
+ return PCIBIOS_SUCCESSFUL;
+
+ return pci_generic_config_write(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ if (starfive_pcie_hide_rc_bar(bus, devfn, where)) {
+ *value = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ return pci_generic_config_read(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
+ struct device *dev)
+{
+ int domain_nr;
+
+ pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
+ if (pcie->num_clks < 0)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get pcie clocks\n");
+
+ pcie->resets = devm_reset_control_array_get_exclusive(dev);
+ if (IS_ERR(pcie->resets))
+ return dev_err_probe(dev, PTR_ERR(pcie->resets),
+ "failed to get pcie resets");
+
+ pcie->reg_syscon =
+ syscon_regmap_lookup_by_phandle(dev->of_node,
+ "starfive,stg-syscon");
+
+ if (IS_ERR(pcie->reg_syscon))
+ return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
+ "failed to parse starfive,stg-syscon\n");
+
+ pcie->phy = devm_phy_optional_get(dev, NULL);
+ if (IS_ERR(pcie->phy))
+ return dev_err_probe(dev, PTR_ERR(pcie->phy),
+ "failed to get pcie phy\n");
+
+ domain_nr = of_get_pci_domain_nr(dev->of_node);
+
+ if (domain_nr < 0 || domain_nr > 1)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get valid pcie domain\n");
+
+ if (domain_nr == 0)
+ pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
+ else
+ pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
+
+ pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(pcie->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
+ "failed to get perst-gpio\n");
+
+ pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pcie->power_gpio))
+ return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
+ "failed to get power-gpio\n");
+
+ return 0;
+}
+
+static struct pci_ops starfive_pcie_ops = {
+ .map_bus = plda_pcie_map_bus,
+ .read = starfive_pcie_config_read,
+ .write = starfive_pcie_config_write,
+};
+
+static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
+{
+ struct device *dev = pcie->plda.dev;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable clocks\n");
+
+ ret = reset_control_deassert(pcie->resets);
+ if (ret) {
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+ dev_err_probe(dev, ret, "failed to deassert resets\n");
+ }
+
+ return ret;
+}
+
+static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
+{
+ reset_control_assert(pcie->resets);
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+}
+
+static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+ int ret;
+ u32 stg_reg_val;
+
+ ret = regmap_read(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET,
+ &stg_reg_val);
+ if (ret) {
+ dev_err(pcie->plda.dev, "failed to read link status\n");
+ return false;
+ }
+
+ return !!(stg_reg_val & DATA_LINK_ACTIVE);
+}
+
+static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
+{
+ int retries;
+
+ /* Check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (starfive_pcie_link_up(&pcie->plda)) {
+ dev_info(pcie->plda.dev, "port link up\n");
+ return 0;
+ }
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int starfive_pcie_enable_phy(struct device *dev,
+ struct starfive_jh7110_pcie *pcie)
+{
+ int ret;
+
+ if (!pcie->phy)
+ return 0;
+
+ ret = phy_init(pcie->phy);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to initialize pcie phy\n");
+
+ ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to set pcie mode\n");
+ goto err_phy_on;
+ }
+
+ ret = phy_power_on(pcie->phy);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to power on pcie phy\n");
+ goto err_phy_on;
+ }
+
+ return 0;
+
+err_phy_on:
+ phy_exit(pcie->phy);
+ return ret;
+}
+
+static void starfive_pcie_disable_phy(struct starfive_jh7110_pcie *pcie)
+{
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+}
+
+static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+
+ starfive_pcie_clk_rst_deinit(pcie);
+ if (pcie->power_gpio)
+ gpiod_set_value_cansleep(pcie->power_gpio, 0);
+ starfive_pcie_disable_phy(pcie);
+}
+
+static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+ struct device *dev = plda->dev;
+ int ret;
+ int i;
+
+ ret = starfive_pcie_enable_phy(dev, pcie);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET,
+ STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_CKREF_SRC_MASK,
+ FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
+
+ ret = starfive_pcie_clk_rst_init(pcie);
+ if (ret)
+ return ret;
+
+ if (pcie->power_gpio)
+ gpiod_set_value_cansleep(pcie->power_gpio, 1);
+
+ if (pcie->reset_gpio)
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+
+ /* Disable physical functions except #0 */
+ for (i = 1; i < PCIE_FUNC_NUM; i++) {
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AR_MASK,
+ STG_SYSCON_AXI4_SLVL_PHY_AR(i));
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AW_MASK,
+ STG_SYSCON_AXI4_SLVL_PHY_AW(i));
+
+ plda_pcie_disable_func(plda);
+ }
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AR_MASK, 0);
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AW_MASK, 0);
+
+ plda_pcie_enable_root_port(plda);
+ plda_pcie_write_rc_bar(plda, 0);
+
+ /* PCIe PCI Standard Configuration Identification Settings. */
+ plda_pcie_set_standard_class(plda);
+
+ /*
+ * The LTR message forwarding of PCIe Message Reception was set by core
+ * as default, but the forward id & addr are also need to be reset.
+ * If we do not disable LTR message forwarding here, or set a legal
+ * forwarding address, the kernel will get stuck after the driver probe.
+ * To workaround, disable the LTR message forwarding support on
+ * PCIe Message Reception.
+ */
+ plda_pcie_disable_ltr(plda);
+
+ /* Prefetchable memory window 64-bit addressing support */
+ plda_pcie_set_pref_win_64bit(plda);
+
+ /*
+ * Ensure that PERST has been asserted for at least 100 ms,
+ * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
+ */
+ msleep(100);
+ if (pcie->reset_gpio)
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+
+ /*
+ * With a Downstream Port (<=5GT/s), software must wait a minimum
+ * of 100ms following exit from a conventional reset before
+ * sending a configuration request to the device.
+ */
+ msleep(PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS);
+
+ if (starfive_pcie_host_wait_for_link(pcie))
+ dev_info(dev, "port link down\n");
+
+ return 0;
+}
+
+static const struct plda_pcie_host_ops sf_host_ops = {
+ .host_init = starfive_pcie_host_init,
+ .host_deinit = starfive_pcie_host_deinit,
+};
+
+static int starfive_pcie_probe(struct platform_device *pdev)
+{
+ struct starfive_jh7110_pcie *pcie;
+ struct device *dev = &pdev->dev;
+ struct plda_pcie_rp *plda;
+ int ret;
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ plda = &pcie->plda;
+ plda->dev = dev;
+
+ ret = starfive_pcie_parse_dt(pcie, dev);
+ if (ret)
+ return ret;
+
+ plda->host_ops = &sf_host_ops;
+ plda->num_events = NUM_PLDA_EVENTS;
+ ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+ platform_set_drvdata(pdev, pcie);
+
+ return 0;
+}
+
+static void starfive_pcie_remove(struct platform_device *pdev)
+{
+ struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
+
+ plda_pcie_host_deinit(&pcie->plda);
+ platform_set_drvdata(pdev, NULL);
+}
+
+static int starfive_pcie_suspend_noirq(struct device *dev)
+{
+ struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+ starfive_pcie_disable_phy(pcie);
+
+ return 0;
+}
+
+static int starfive_pcie_resume_noirq(struct device *dev)
+{
+ struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+ int ret;
+
+ ret = starfive_pcie_enable_phy(dev, pcie);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+ if (ret) {
+ dev_err(dev, "failed to enable clocks\n");
+ starfive_pcie_disable_phy(pcie);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops starfive_pcie_pm_ops = {
+ NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
+ starfive_pcie_resume_noirq)
+};
+
+static const struct of_device_id starfive_pcie_of_match[] = {
+ { .compatible = "starfive,jh7110-pcie", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
+
+static struct platform_driver starfive_pcie_driver = {
+ .driver = {
+ .name = "pcie-starfive",
+ .of_match_table = of_match_ptr(starfive_pcie_of_match),
+ .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
+ },
+ .probe = starfive_pcie_probe,
+ .remove_new = starfive_pcie_remove,
+};
+module_platform_driver(starfive_pcie_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 5ecbcf041179..7b35c06d05b5 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -22,6 +22,13 @@
*/
#define PCIE_PME_TO_L2_TIMEOUT_US 10000
+/*
+ * PCIe r6.0, sec 6.6.1, <Conventional Reset>
+ * Requires a minimum waiting of 100ms before sending a configuration
+ * request to the device.
+ */
+#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
+
extern const unsigned char pcie_link_speed[];
extern bool pci_early_dump;
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 20/20] riscv: dts: starfive: add PCIe dts configuration for JH7110
2023-11-15 11:48 ` Minda Chen
@ 2023-11-15 11:49 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add PCIe dts configuraion for JH7110 SoC platform.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 64 ++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++++++++++++++++++
2 files changed, 150 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index b89e9791efa7..2f8056d6f817 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -287,6 +287,22 @@
status = "okay";
};
+&pcie0 {
+ perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_pins>;
+ status = "okay";
+};
+
&qspi {
#address-cells = <1>;
#size-cells = <0>;
@@ -513,6 +529,54 @@
};
};
+ pcie0_pins: pcie0-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(27, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(32, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_pins: pcie1-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(29, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(21, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
spi0_pins: spi0-0 {
mosi-pins {
pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 45213cdf50dc..dfa2f94ed5b2 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -1138,5 +1138,91 @@
#reset-cells = <1>;
power-domains = <&pwrc JH7110_PD_VOUT>;
};
+
+ pcie0: pcie@940000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0x40000000 0x0 0x1000000>,
+ <0x0 0x2b000000 0x0 0x100000>;
+ reg-names = "cfg", "apb";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
+ interrupts = <56>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+ msi-controller;
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>,
+ <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE0_APB>;
+ reset-names = "mst0", "slv0", "slv", "brg",
+ "core", "apb";
+ status = "disabled";
+
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie1: pcie@9c0000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0xc0000000 0x0 0x1000000>,
+ <0x0 0x2c000000 0x0 0x100000>;
+ reg-names = "cfg", "apb";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>;
+ interrupts = <57>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>;
+ msi-controller;
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>,
+ <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE1_APB>;
+ reset-names = "mst0", "slv0", "slv", "brg",
+ "core", "apb";
+ status = "disabled";
+
+ pcie_intc1: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH v11 20/20] riscv: dts: starfive: add PCIe dts configuration for JH7110
@ 2023-11-15 11:49 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-15 11:49 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie, Minda Chen
Add PCIe dts configuraion for JH7110 SoC platform.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 64 ++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++++++++++++++++++
2 files changed, 150 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index b89e9791efa7..2f8056d6f817 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -287,6 +287,22 @@
status = "okay";
};
+&pcie0 {
+ perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_pins>;
+ status = "okay";
+};
+
&qspi {
#address-cells = <1>;
#size-cells = <0>;
@@ -513,6 +529,54 @@
};
};
+ pcie0_pins: pcie0-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(27, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(32, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_pins: pcie1-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(29, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(21, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
spi0_pins: spi0-0 {
mosi-pins {
pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 45213cdf50dc..dfa2f94ed5b2 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -1138,5 +1138,91 @@
#reset-cells = <1>;
power-domains = <&pwrc JH7110_PD_VOUT>;
};
+
+ pcie0: pcie@940000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0x40000000 0x0 0x1000000>,
+ <0x0 0x2b000000 0x0 0x100000>;
+ reg-names = "cfg", "apb";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
+ interrupts = <56>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+ msi-controller;
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>,
+ <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE0_APB>;
+ reset-names = "mst0", "slv0", "slv", "brg",
+ "core", "apb";
+ status = "disabled";
+
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie1: pcie@9c0000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0xc0000000 0x0 0x1000000>,
+ <0x0 0x2c000000 0x0 0x100000>;
+ reg-names = "cfg", "apb";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>;
+ interrupts = <57>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>;
+ msi-controller;
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>,
+ <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE1_APB>;
+ reset-names = "mst0", "slv0", "slv", "brg",
+ "core", "apb";
+ status = "disabled";
+
+ pcie_intc1: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
};
};
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply related [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-11-15 11:49 ` Minda Chen
@ 2023-11-20 10:07 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-20 10:07 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/15 19:49, Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
> with PLDA host PCIe core.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> ---
> MAINTAINERS | 7 +
> drivers/pci/controller/plda/Kconfig | 11 +
> drivers/pci/controller/plda/Makefile | 1 +
> drivers/pci/controller/plda/pcie-plda.h | 71 ++-
> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
> drivers/pci/pci.h | 7 +
> 6 files changed, 556 insertions(+), 1 deletion(-)
> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4c08d9354dff..fd4f4f06c069 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16876,6 +16876,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
> F: drivers/pci/controller/dwc/pcie-uniphier*
>
> +PCIE DRIVER FOR STARFIVE JH71x0
> +M: Kevin Xie <kevin.xie@starfivetech.com>
> +L: linux-pci@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/pci/starfive*
> +F: drivers/pci/controller/plda/pcie-starfive.c
> +
> PCIE DRIVER FOR ST SPEAR13XX
> M: Pratyush Anand <pratyush.anand@gmail.com>
> L: linux-pci@vger.kernel.org
> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> index e54a82ee94f5..f0791bc6d9f5 100644
> --- a/drivers/pci/controller/plda/Kconfig
> +++ b/drivers/pci/controller/plda/Kconfig
> @@ -15,4 +15,15 @@ config PCIE_MICROCHIP_HOST
> Say Y here if you want kernel to support the Microchip AXI PCIe
> Host Bridge driver.
>
> +config PCIE_STARFIVE_HOST
> + tristate "StarFive PCIe host controller"
> + depends on OF && PCI_MSI
> + select PCIE_PLDA_HOST
> + help
> + Say Y here if you want to support the StarFive PCIe controller in
> + host mode. StarFive PCIe controller uses PLDA PCIe core.
> +
> + If you choose to build this driver as module it will be dynamically
> + linked and module will be called pcie-starfive.ko.
> +
> endmenu
> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> index 4340ab007f44..0ac6851bed48 100644
> --- a/drivers/pci/controller/plda/Makefile
> +++ b/drivers/pci/controller/plda/Makefile
> @@ -1,3 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
> obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index 6b29bf1f5293..80dbd34d2d51 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -10,10 +10,20 @@
> #define PLDA_MAX_NUM_MSI_IRQS 32
>
> /* PCIe Bridge Phy Regs */
> +#define GEN_SETTINGS 0x80
> +#define RP_ENABLE 1
> +#define PCIE_PCI_IDS_DW1 0x9c
> +#define IDS_CLASS_CODE_SHIFT 16
> +#define REVISION_ID_MASK GENMASK(7, 0)
> +#define CLASS_CODE_ID_MASK GENMASK(31, 8)
> #define PCIE_PCI_IRQ_DW0 0xa8
> #define MSIX_CAP_MASK BIT(31)
> #define NUM_MSI_MSGS_MASK GENMASK(6, 4)
> #define NUM_MSI_MSGS_SHIFT 4
> +#define PCI_MISC 0xb4
> +#define PHY_FUNCTION_DIS BIT(15)
> +#define PCIE_WINROM 0xfc
> +#define PREF_MEM_WIN_64_SUPPORT BIT(3)
>
> #define IMASK_LOCAL 0x180
> #define DMA_END_ENGINE_0_MASK 0x00000000u
> @@ -66,6 +76,8 @@
> #define ISTATUS_HOST 0x18c
> #define IMSI_ADDR 0x190
> #define ISTATUS_MSI 0x194
> +#define PMSG_SUPPORT_RX 0x3f0
> +#define PMSG_LTR_SUPPORT BIT(2)
>
> /* PCIe Master table init defines */
> #define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
> @@ -87,6 +99,8 @@
> #define PCIE_TX_RX_INTERFACE 0x00000000u
> #define PCIE_CONFIG_INTERFACE 0x00000001u
>
> +#define CONFIG_SPACE_ADDR_OFFSET 0x1000u
> +
> #define ATR_ENTRY_SIZE 32
>
> #define EVENT_A_ATR_EVT_POST_ERR 0
> @@ -194,4 +208,59 @@ static inline void plda_set_default_msi(struct plda_msi *msi)
> msi->vector_phy = IMSI_ADDR;
> msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
> }
> -#endif
> +
> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
> + value |= RP_ENABLE;
> + writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
> +}
> +
> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + /* set class code and reserve revision id */
> + value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
> + value &= REVISION_ID_MASK;
> + value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
> + writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
> +}
> +
> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
> + value |= PREF_MEM_WIN_64_SUPPORT;
> + writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
> +}
> +
> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
> + value &= ~PMSG_LTR_SUPPORT;
> + writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
> +}
> +
> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + PCI_MISC);
> + value |= PHY_FUNCTION_DIS;
> + writel_relaxed(value, plda->bridge_addr + PCI_MISC);
> +}
> +
> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
> +{
> + void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR_OFFSET;
> +
> + writel_relaxed(lower_32_bits(val), addr + PCI_BASE_ADDRESS_0);
> + writel_relaxed(upper_32_bits(val), addr + PCI_BASE_ADDRESS_1);
> +}
> +#endif /* _PCIE_PLDA_H */
> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
> new file mode 100644
> index 000000000000..c0673faac312
> --- /dev/null
> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> @@ -0,0 +1,460 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * PCIe host controller driver for StarFive JH7110 Soc.
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include "../../pci.h"
> +
> +#include "pcie-plda.h"
> +
> +#define PCIE_FUNC_NUM 4
> +
> +/* system control */
> +#define STG_SYSCON_PCIE0_BASE 0x48
> +#define STG_SYSCON_PCIE1_BASE 0x1f8
> +
> +#define STG_SYSCON_AR_OFFSET 0x78
> +#define STG_SYSCON_AXI4_SLVL_AR_MASK GENMASK(22, 8)
> +#define STG_SYSCON_AXI4_SLVL_PHY_AR(x) FIELD_PREP(GENMASK(20, 17), x)
> +#define STG_SYSCON_AW_OFFSET 0x7c
> +#define STG_SYSCON_AXI4_SLVL_AW_MASK GENMASK(14, 0)
> +#define STG_SYSCON_AXI4_SLVL_PHY_AW(x) FIELD_PREP(GENMASK(12, 9), x)
> +#define STG_SYSCON_CLKREQ BIT(22)
> +#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
> +#define STG_SYSCON_RP_NEP_OFFSET 0xe8
> +#define STG_SYSCON_K_RP_NEP BIT(8)
> +#define STG_SYSCON_LNKSTA_OFFSET 0x170
> +#define DATA_LINK_ACTIVE BIT(5)
> +
> +/* Parameters for the waiting for link up routine */
> +#define LINK_WAIT_MAX_RETRIES 10
> +#define LINK_WAIT_USLEEP_MIN 90000
> +#define LINK_WAIT_USLEEP_MAX 100000
> +
> +struct starfive_jh7110_pcie {
> + struct plda_pcie_rp plda;
> + struct reset_control *resets;
> + struct clk_bulk_data *clks;
> + struct regmap *reg_syscon;
> + struct gpio_desc *power_gpio;
> + struct gpio_desc *reset_gpio;
> + struct phy *phy;
> +
> + unsigned int stg_pcie_base;
> + int num_clks;
> +};
> +
> +/*
> + * The BAR0/1 of bridge should be hidden during enumeration to
> + * avoid the sizing and resource allocation by PCIe core.
> + */
> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
> + int offset)
> +{
> + if (pci_is_root_bus(bus) && !devfn &&
> + (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
> + return true;
> +
> + return false;
> +}
> +
> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 value)
> +{
> + if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> + return PCIBIOS_SUCCESSFUL;
> +
> + return pci_generic_config_write(bus, devfn, where, size, value);
> +}
> +
> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 *value)
> +{
> + if (starfive_pcie_hide_rc_bar(bus, devfn, where)) {
> + *value = 0;
> + return PCIBIOS_SUCCESSFUL;
> + }
> +
> + return pci_generic_config_read(bus, devfn, where, size, value);
> +}
> +
> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
> + struct device *dev)
> +{
> + int domain_nr;
> +
> + pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> + if (pcie->num_clks < 0)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get pcie clocks\n");
> +
> + pcie->resets = devm_reset_control_array_get_exclusive(dev);
> + if (IS_ERR(pcie->resets))
> + return dev_err_probe(dev, PTR_ERR(pcie->resets),
> + "failed to get pcie resets");
> +
> + pcie->reg_syscon =
> + syscon_regmap_lookup_by_phandle(dev->of_node,
> + "starfive,stg-syscon");
> +
> + if (IS_ERR(pcie->reg_syscon))
> + return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> + "failed to parse starfive,stg-syscon\n");
> +
> + pcie->phy = devm_phy_optional_get(dev, NULL);
> + if (IS_ERR(pcie->phy))
> + return dev_err_probe(dev, PTR_ERR(pcie->phy),
> + "failed to get pcie phy\n");
> +
> + domain_nr = of_get_pci_domain_nr(dev->of_node);
> +
> + if (domain_nr < 0 || domain_nr > 1)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get valid pcie domain\n");
> +
> + if (domain_nr == 0)
> + pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> + else
> + pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> +
> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(pcie->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
> + "failed to get perst-gpio\n");
> +
> + pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(pcie->power_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
> + "failed to get power-gpio\n");
> +
> + return 0;
> +}
> +
> +static struct pci_ops starfive_pcie_ops = {
> + .map_bus = plda_pcie_map_bus,
> + .read = starfive_pcie_config_read,
> + .write = starfive_pcie_config_write,
> +};
> +
> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
> +{
> + struct device *dev = pcie->plda.dev;
> + int ret;
> +
> + ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to enable clocks\n");
> +
> + ret = reset_control_deassert(pcie->resets);
> + if (ret) {
> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> + dev_err_probe(dev, ret, "failed to deassert resets\n");
> + }
> +
> + return ret;
> +}
> +
> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
> +{
> + reset_control_assert(pcie->resets);
> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> +}
> +
> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
> +{
> + struct starfive_jh7110_pcie *pcie =
> + container_of(plda, struct starfive_jh7110_pcie, plda);
> + int ret;
> + u32 stg_reg_val;
> +
> + ret = regmap_read(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET,
> + &stg_reg_val);
> + if (ret) {
> + dev_err(pcie->plda.dev, "failed to read link status\n");
> + return false;
> + }
> +
> + return !!(stg_reg_val & DATA_LINK_ACTIVE);
> +}
> +
> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
> +{
> + int retries;
> +
> + /* Check if the link is up or not */
> + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> + if (starfive_pcie_link_up(&pcie->plda)) {
> + dev_info(pcie->plda.dev, "port link up\n");
> + return 0;
> + }
> + usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int starfive_pcie_enable_phy(struct device *dev,
> + struct starfive_jh7110_pcie *pcie)
> +{
> + int ret;
> +
> + if (!pcie->phy)
> + return 0;
> +
> + ret = phy_init(pcie->phy);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to initialize pcie phy\n");
> +
> + ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to set pcie mode\n");
> + goto err_phy_on;
> + }
> +
> + ret = phy_power_on(pcie->phy);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to power on pcie phy\n");
> + goto err_phy_on;
> + }
> +
> + return 0;
> +
> +err_phy_on:
> + phy_exit(pcie->phy);
> + return ret;
> +}
> +
> +static void starfive_pcie_disable_phy(struct starfive_jh7110_pcie *pcie)
> +{
> + phy_power_off(pcie->phy);
> + phy_exit(pcie->phy);
> +}
> +
> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
> +{
> + struct starfive_jh7110_pcie *pcie =
> + container_of(plda, struct starfive_jh7110_pcie, plda);
> +
> + starfive_pcie_clk_rst_deinit(pcie);
> + if (pcie->power_gpio)
> + gpiod_set_value_cansleep(pcie->power_gpio, 0);
> + starfive_pcie_disable_phy(pcie);
> +}
> +
> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
> +{
> + struct starfive_jh7110_pcie *pcie =
> + container_of(plda, struct starfive_jh7110_pcie, plda);
> + struct device *dev = plda->dev;
> + int ret;
> + int i;
> +
> + ret = starfive_pcie_enable_phy(dev, pcie);
> + if (ret)
> + return ret;
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET,
> + STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_CKREF_SRC_MASK,
> + FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
> +
> + ret = starfive_pcie_clk_rst_init(pcie);
> + if (ret)
> + return ret;
> +
> + if (pcie->power_gpio)
> + gpiod_set_value_cansleep(pcie->power_gpio, 1);
> +
> + if (pcie->reset_gpio)
> + gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> +
> + /* Disable physical functions except #0 */
> + for (i = 1; i < PCIE_FUNC_NUM; i++) {
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AR_MASK,
> + STG_SYSCON_AXI4_SLVL_PHY_AR(i));
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AW_MASK,
> + STG_SYSCON_AXI4_SLVL_PHY_AW(i));
> +
> + plda_pcie_disable_func(plda);
> + }
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AR_MASK, 0);
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AW_MASK, 0);
> +
> + plda_pcie_enable_root_port(plda);
> + plda_pcie_write_rc_bar(plda, 0);
> +
> + /* PCIe PCI Standard Configuration Identification Settings. */
> + plda_pcie_set_standard_class(plda);
> +
> + /*
> + * The LTR message forwarding of PCIe Message Reception was set by core
> + * as default, but the forward id & addr are also need to be reset.
> + * If we do not disable LTR message forwarding here, or set a legal
> + * forwarding address, the kernel will get stuck after the driver probe.
> + * To workaround, disable the LTR message forwarding support on
> + * PCIe Message Reception.
> + */
> + plda_pcie_disable_ltr(plda);
> +
> + /* Prefetchable memory window 64-bit addressing support */
> + plda_pcie_set_pref_win_64bit(plda);
> +
> + /*
> + * Ensure that PERST has been asserted for at least 100 ms,
> + * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> + */
> + msleep(100);
> + if (pcie->reset_gpio)
> + gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> +
> + /*
> + * With a Downstream Port (<=5GT/s), software must wait a minimum
> + * of 100ms following exit from a conventional reset before
> + * sending a configuration request to the device.
> + */
> + msleep(PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS);
> +
> + if (starfive_pcie_host_wait_for_link(pcie))
> + dev_info(dev, "port link down\n");
> +
> + return 0;
> +}
> +
> +static const struct plda_pcie_host_ops sf_host_ops = {
> + .host_init = starfive_pcie_host_init,
> + .host_deinit = starfive_pcie_host_deinit,
> +};
> +
> +static int starfive_pcie_probe(struct platform_device *pdev)
> +{
> + struct starfive_jh7110_pcie *pcie;
> + struct device *dev = &pdev->dev;
> + struct plda_pcie_rp *plda;
> + int ret;
> +
> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + plda = &pcie->plda;
> + plda->dev = dev;
> +
> + ret = starfive_pcie_parse_dt(pcie, dev);
> + if (ret)
> + return ret;
> +
> + plda->host_ops = &sf_host_ops;
> + plda->num_events = NUM_PLDA_EVENTS;
> + ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
> + if (ret)
> + return ret;
> +
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_get_sync(&pdev->dev);
> + platform_set_drvdata(pdev, pcie);
> +
> + return 0;
> +}
> +
> +static void starfive_pcie_remove(struct platform_device *pdev)
> +{
> + struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
> +
> + plda_pcie_host_deinit(&pcie->plda);
> + platform_set_drvdata(pdev, NULL);
> +}
> +
> +static int starfive_pcie_suspend_noirq(struct device *dev)
> +{
> + struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> +
> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> + starfive_pcie_disable_phy(pcie);
> +
> + return 0;
> +}
> +
> +static int starfive_pcie_resume_noirq(struct device *dev)
> +{
> + struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = starfive_pcie_enable_phy(dev, pcie);
> + if (ret)
> + return ret;
> +
> + ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> + if (ret) {
> + dev_err(dev, "failed to enable clocks\n");
> + starfive_pcie_disable_phy(pcie);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
> + NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
> + starfive_pcie_resume_noirq)
> +};
> +
> +static const struct of_device_id starfive_pcie_of_match[] = {
> + { .compatible = "starfive,jh7110-pcie", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
> +
> +static struct platform_driver starfive_pcie_driver = {
> + .driver = {
> + .name = "pcie-starfive",
> + .of_match_table = of_match_ptr(starfive_pcie_of_match),
> + .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
> + },
> + .probe = starfive_pcie_probe,
> + .remove_new = starfive_pcie_remove,
> +};
> +module_platform_driver(starfive_pcie_driver);
> +
> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 5ecbcf041179..7b35c06d05b5 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -22,6 +22,13 @@
> */
> #define PCIE_PME_TO_L2_TIMEOUT_US 10000
>
> +/*
> + * PCIe r6.0, sec 6.6.1, <Conventional Reset>
> + * Requires a minimum waiting of 100ms before sending a configuration
> + * request to the device.
> + */
> +#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
> +
> extern const unsigned char pcie_link_speed[];
> extern bool pci_early_dump;
>
Hi Bjorn
I have not checked this carefully.
I think the change of pci.h should be moved to a indepent patch. Could you approve this? Kevin will commit a new patch for this. Next version I will remove this change.
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-11-20 10:07 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-20 10:07 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/15 19:49, Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
> with PLDA host PCIe core.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> ---
> MAINTAINERS | 7 +
> drivers/pci/controller/plda/Kconfig | 11 +
> drivers/pci/controller/plda/Makefile | 1 +
> drivers/pci/controller/plda/pcie-plda.h | 71 ++-
> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
> drivers/pci/pci.h | 7 +
> 6 files changed, 556 insertions(+), 1 deletion(-)
> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4c08d9354dff..fd4f4f06c069 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16876,6 +16876,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/pci/socionext,uniphier-pcie*
> F: drivers/pci/controller/dwc/pcie-uniphier*
>
> +PCIE DRIVER FOR STARFIVE JH71x0
> +M: Kevin Xie <kevin.xie@starfivetech.com>
> +L: linux-pci@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/pci/starfive*
> +F: drivers/pci/controller/plda/pcie-starfive.c
> +
> PCIE DRIVER FOR ST SPEAR13XX
> M: Pratyush Anand <pratyush.anand@gmail.com>
> L: linux-pci@vger.kernel.org
> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> index e54a82ee94f5..f0791bc6d9f5 100644
> --- a/drivers/pci/controller/plda/Kconfig
> +++ b/drivers/pci/controller/plda/Kconfig
> @@ -15,4 +15,15 @@ config PCIE_MICROCHIP_HOST
> Say Y here if you want kernel to support the Microchip AXI PCIe
> Host Bridge driver.
>
> +config PCIE_STARFIVE_HOST
> + tristate "StarFive PCIe host controller"
> + depends on OF && PCI_MSI
> + select PCIE_PLDA_HOST
> + help
> + Say Y here if you want to support the StarFive PCIe controller in
> + host mode. StarFive PCIe controller uses PLDA PCIe core.
> +
> + If you choose to build this driver as module it will be dynamically
> + linked and module will be called pcie-starfive.ko.
> +
> endmenu
> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> index 4340ab007f44..0ac6851bed48 100644
> --- a/drivers/pci/controller/plda/Makefile
> +++ b/drivers/pci/controller/plda/Makefile
> @@ -1,3 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
> obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> +obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index 6b29bf1f5293..80dbd34d2d51 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -10,10 +10,20 @@
> #define PLDA_MAX_NUM_MSI_IRQS 32
>
> /* PCIe Bridge Phy Regs */
> +#define GEN_SETTINGS 0x80
> +#define RP_ENABLE 1
> +#define PCIE_PCI_IDS_DW1 0x9c
> +#define IDS_CLASS_CODE_SHIFT 16
> +#define REVISION_ID_MASK GENMASK(7, 0)
> +#define CLASS_CODE_ID_MASK GENMASK(31, 8)
> #define PCIE_PCI_IRQ_DW0 0xa8
> #define MSIX_CAP_MASK BIT(31)
> #define NUM_MSI_MSGS_MASK GENMASK(6, 4)
> #define NUM_MSI_MSGS_SHIFT 4
> +#define PCI_MISC 0xb4
> +#define PHY_FUNCTION_DIS BIT(15)
> +#define PCIE_WINROM 0xfc
> +#define PREF_MEM_WIN_64_SUPPORT BIT(3)
>
> #define IMASK_LOCAL 0x180
> #define DMA_END_ENGINE_0_MASK 0x00000000u
> @@ -66,6 +76,8 @@
> #define ISTATUS_HOST 0x18c
> #define IMSI_ADDR 0x190
> #define ISTATUS_MSI 0x194
> +#define PMSG_SUPPORT_RX 0x3f0
> +#define PMSG_LTR_SUPPORT BIT(2)
>
> /* PCIe Master table init defines */
> #define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
> @@ -87,6 +99,8 @@
> #define PCIE_TX_RX_INTERFACE 0x00000000u
> #define PCIE_CONFIG_INTERFACE 0x00000001u
>
> +#define CONFIG_SPACE_ADDR_OFFSET 0x1000u
> +
> #define ATR_ENTRY_SIZE 32
>
> #define EVENT_A_ATR_EVT_POST_ERR 0
> @@ -194,4 +208,59 @@ static inline void plda_set_default_msi(struct plda_msi *msi)
> msi->vector_phy = IMSI_ADDR;
> msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
> }
> -#endif
> +
> +static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
> + value |= RP_ENABLE;
> + writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
> +}
> +
> +static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + /* set class code and reserve revision id */
> + value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
> + value &= REVISION_ID_MASK;
> + value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
> + writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
> +}
> +
> +static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
> + value |= PREF_MEM_WIN_64_SUPPORT;
> + writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
> +}
> +
> +static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
> + value &= ~PMSG_LTR_SUPPORT;
> + writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
> +}
> +
> +static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
> +{
> + u32 value;
> +
> + value = readl_relaxed(plda->bridge_addr + PCI_MISC);
> + value |= PHY_FUNCTION_DIS;
> + writel_relaxed(value, plda->bridge_addr + PCI_MISC);
> +}
> +
> +static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
> +{
> + void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR_OFFSET;
> +
> + writel_relaxed(lower_32_bits(val), addr + PCI_BASE_ADDRESS_0);
> + writel_relaxed(upper_32_bits(val), addr + PCI_BASE_ADDRESS_1);
> +}
> +#endif /* _PCIE_PLDA_H */
> diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
> new file mode 100644
> index 000000000000..c0673faac312
> --- /dev/null
> +++ b/drivers/pci/controller/plda/pcie-starfive.c
> @@ -0,0 +1,460 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * PCIe host controller driver for StarFive JH7110 Soc.
> + *
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include "../../pci.h"
> +
> +#include "pcie-plda.h"
> +
> +#define PCIE_FUNC_NUM 4
> +
> +/* system control */
> +#define STG_SYSCON_PCIE0_BASE 0x48
> +#define STG_SYSCON_PCIE1_BASE 0x1f8
> +
> +#define STG_SYSCON_AR_OFFSET 0x78
> +#define STG_SYSCON_AXI4_SLVL_AR_MASK GENMASK(22, 8)
> +#define STG_SYSCON_AXI4_SLVL_PHY_AR(x) FIELD_PREP(GENMASK(20, 17), x)
> +#define STG_SYSCON_AW_OFFSET 0x7c
> +#define STG_SYSCON_AXI4_SLVL_AW_MASK GENMASK(14, 0)
> +#define STG_SYSCON_AXI4_SLVL_PHY_AW(x) FIELD_PREP(GENMASK(12, 9), x)
> +#define STG_SYSCON_CLKREQ BIT(22)
> +#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
> +#define STG_SYSCON_RP_NEP_OFFSET 0xe8
> +#define STG_SYSCON_K_RP_NEP BIT(8)
> +#define STG_SYSCON_LNKSTA_OFFSET 0x170
> +#define DATA_LINK_ACTIVE BIT(5)
> +
> +/* Parameters for the waiting for link up routine */
> +#define LINK_WAIT_MAX_RETRIES 10
> +#define LINK_WAIT_USLEEP_MIN 90000
> +#define LINK_WAIT_USLEEP_MAX 100000
> +
> +struct starfive_jh7110_pcie {
> + struct plda_pcie_rp plda;
> + struct reset_control *resets;
> + struct clk_bulk_data *clks;
> + struct regmap *reg_syscon;
> + struct gpio_desc *power_gpio;
> + struct gpio_desc *reset_gpio;
> + struct phy *phy;
> +
> + unsigned int stg_pcie_base;
> + int num_clks;
> +};
> +
> +/*
> + * The BAR0/1 of bridge should be hidden during enumeration to
> + * avoid the sizing and resource allocation by PCIe core.
> + */
> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
> + int offset)
> +{
> + if (pci_is_root_bus(bus) && !devfn &&
> + (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
> + return true;
> +
> + return false;
> +}
> +
> +static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 value)
> +{
> + if (starfive_pcie_hide_rc_bar(bus, devfn, where))
> + return PCIBIOS_SUCCESSFUL;
> +
> + return pci_generic_config_write(bus, devfn, where, size, value);
> +}
> +
> +static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 *value)
> +{
> + if (starfive_pcie_hide_rc_bar(bus, devfn, where)) {
> + *value = 0;
> + return PCIBIOS_SUCCESSFUL;
> + }
> +
> + return pci_generic_config_read(bus, devfn, where, size, value);
> +}
> +
> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
> + struct device *dev)
> +{
> + int domain_nr;
> +
> + pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> + if (pcie->num_clks < 0)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get pcie clocks\n");
> +
> + pcie->resets = devm_reset_control_array_get_exclusive(dev);
> + if (IS_ERR(pcie->resets))
> + return dev_err_probe(dev, PTR_ERR(pcie->resets),
> + "failed to get pcie resets");
> +
> + pcie->reg_syscon =
> + syscon_regmap_lookup_by_phandle(dev->of_node,
> + "starfive,stg-syscon");
> +
> + if (IS_ERR(pcie->reg_syscon))
> + return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> + "failed to parse starfive,stg-syscon\n");
> +
> + pcie->phy = devm_phy_optional_get(dev, NULL);
> + if (IS_ERR(pcie->phy))
> + return dev_err_probe(dev, PTR_ERR(pcie->phy),
> + "failed to get pcie phy\n");
> +
> + domain_nr = of_get_pci_domain_nr(dev->of_node);
> +
> + if (domain_nr < 0 || domain_nr > 1)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get valid pcie domain\n");
> +
> + if (domain_nr == 0)
> + pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> + else
> + pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> +
> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(pcie->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
> + "failed to get perst-gpio\n");
> +
> + pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(pcie->power_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
> + "failed to get power-gpio\n");
> +
> + return 0;
> +}
> +
> +static struct pci_ops starfive_pcie_ops = {
> + .map_bus = plda_pcie_map_bus,
> + .read = starfive_pcie_config_read,
> + .write = starfive_pcie_config_write,
> +};
> +
> +static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
> +{
> + struct device *dev = pcie->plda.dev;
> + int ret;
> +
> + ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to enable clocks\n");
> +
> + ret = reset_control_deassert(pcie->resets);
> + if (ret) {
> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> + dev_err_probe(dev, ret, "failed to deassert resets\n");
> + }
> +
> + return ret;
> +}
> +
> +static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
> +{
> + reset_control_assert(pcie->resets);
> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> +}
> +
> +static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
> +{
> + struct starfive_jh7110_pcie *pcie =
> + container_of(plda, struct starfive_jh7110_pcie, plda);
> + int ret;
> + u32 stg_reg_val;
> +
> + ret = regmap_read(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET,
> + &stg_reg_val);
> + if (ret) {
> + dev_err(pcie->plda.dev, "failed to read link status\n");
> + return false;
> + }
> +
> + return !!(stg_reg_val & DATA_LINK_ACTIVE);
> +}
> +
> +static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
> +{
> + int retries;
> +
> + /* Check if the link is up or not */
> + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
> + if (starfive_pcie_link_up(&pcie->plda)) {
> + dev_info(pcie->plda.dev, "port link up\n");
> + return 0;
> + }
> + usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int starfive_pcie_enable_phy(struct device *dev,
> + struct starfive_jh7110_pcie *pcie)
> +{
> + int ret;
> +
> + if (!pcie->phy)
> + return 0;
> +
> + ret = phy_init(pcie->phy);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to initialize pcie phy\n");
> +
> + ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to set pcie mode\n");
> + goto err_phy_on;
> + }
> +
> + ret = phy_power_on(pcie->phy);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to power on pcie phy\n");
> + goto err_phy_on;
> + }
> +
> + return 0;
> +
> +err_phy_on:
> + phy_exit(pcie->phy);
> + return ret;
> +}
> +
> +static void starfive_pcie_disable_phy(struct starfive_jh7110_pcie *pcie)
> +{
> + phy_power_off(pcie->phy);
> + phy_exit(pcie->phy);
> +}
> +
> +static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
> +{
> + struct starfive_jh7110_pcie *pcie =
> + container_of(plda, struct starfive_jh7110_pcie, plda);
> +
> + starfive_pcie_clk_rst_deinit(pcie);
> + if (pcie->power_gpio)
> + gpiod_set_value_cansleep(pcie->power_gpio, 0);
> + starfive_pcie_disable_phy(pcie);
> +}
> +
> +static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
> +{
> + struct starfive_jh7110_pcie *pcie =
> + container_of(plda, struct starfive_jh7110_pcie, plda);
> + struct device *dev = plda->dev;
> + int ret;
> + int i;
> +
> + ret = starfive_pcie_enable_phy(dev, pcie);
> + if (ret)
> + return ret;
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET,
> + STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_CKREF_SRC_MASK,
> + FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
> +
> + ret = starfive_pcie_clk_rst_init(pcie);
> + if (ret)
> + return ret;
> +
> + if (pcie->power_gpio)
> + gpiod_set_value_cansleep(pcie->power_gpio, 1);
> +
> + if (pcie->reset_gpio)
> + gpiod_set_value_cansleep(pcie->reset_gpio, 1);
> +
> + /* Disable physical functions except #0 */
> + for (i = 1; i < PCIE_FUNC_NUM; i++) {
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AR_MASK,
> + STG_SYSCON_AXI4_SLVL_PHY_AR(i));
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AW_MASK,
> + STG_SYSCON_AXI4_SLVL_PHY_AW(i));
> +
> + plda_pcie_disable_func(plda);
> + }
> +
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AR_MASK, 0);
> + regmap_update_bits(pcie->reg_syscon,
> + pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
> + STG_SYSCON_AXI4_SLVL_AW_MASK, 0);
> +
> + plda_pcie_enable_root_port(plda);
> + plda_pcie_write_rc_bar(plda, 0);
> +
> + /* PCIe PCI Standard Configuration Identification Settings. */
> + plda_pcie_set_standard_class(plda);
> +
> + /*
> + * The LTR message forwarding of PCIe Message Reception was set by core
> + * as default, but the forward id & addr are also need to be reset.
> + * If we do not disable LTR message forwarding here, or set a legal
> + * forwarding address, the kernel will get stuck after the driver probe.
> + * To workaround, disable the LTR message forwarding support on
> + * PCIe Message Reception.
> + */
> + plda_pcie_disable_ltr(plda);
> +
> + /* Prefetchable memory window 64-bit addressing support */
> + plda_pcie_set_pref_win_64bit(plda);
> +
> + /*
> + * Ensure that PERST has been asserted for at least 100 ms,
> + * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
> + */
> + msleep(100);
> + if (pcie->reset_gpio)
> + gpiod_set_value_cansleep(pcie->reset_gpio, 0);
> +
> + /*
> + * With a Downstream Port (<=5GT/s), software must wait a minimum
> + * of 100ms following exit from a conventional reset before
> + * sending a configuration request to the device.
> + */
> + msleep(PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS);
> +
> + if (starfive_pcie_host_wait_for_link(pcie))
> + dev_info(dev, "port link down\n");
> +
> + return 0;
> +}
> +
> +static const struct plda_pcie_host_ops sf_host_ops = {
> + .host_init = starfive_pcie_host_init,
> + .host_deinit = starfive_pcie_host_deinit,
> +};
> +
> +static int starfive_pcie_probe(struct platform_device *pdev)
> +{
> + struct starfive_jh7110_pcie *pcie;
> + struct device *dev = &pdev->dev;
> + struct plda_pcie_rp *plda;
> + int ret;
> +
> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + plda = &pcie->plda;
> + plda->dev = dev;
> +
> + ret = starfive_pcie_parse_dt(pcie, dev);
> + if (ret)
> + return ret;
> +
> + plda->host_ops = &sf_host_ops;
> + plda->num_events = NUM_PLDA_EVENTS;
> + ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops);
> + if (ret)
> + return ret;
> +
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_get_sync(&pdev->dev);
> + platform_set_drvdata(pdev, pcie);
> +
> + return 0;
> +}
> +
> +static void starfive_pcie_remove(struct platform_device *pdev)
> +{
> + struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
> +
> + plda_pcie_host_deinit(&pcie->plda);
> + platform_set_drvdata(pdev, NULL);
> +}
> +
> +static int starfive_pcie_suspend_noirq(struct device *dev)
> +{
> + struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> +
> + clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
> + starfive_pcie_disable_phy(pcie);
> +
> + return 0;
> +}
> +
> +static int starfive_pcie_resume_noirq(struct device *dev)
> +{
> + struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = starfive_pcie_enable_phy(dev, pcie);
> + if (ret)
> + return ret;
> +
> + ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
> + if (ret) {
> + dev_err(dev, "failed to enable clocks\n");
> + starfive_pcie_disable_phy(pcie);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops starfive_pcie_pm_ops = {
> + NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
> + starfive_pcie_resume_noirq)
> +};
> +
> +static const struct of_device_id starfive_pcie_of_match[] = {
> + { .compatible = "starfive,jh7110-pcie", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
> +
> +static struct platform_driver starfive_pcie_driver = {
> + .driver = {
> + .name = "pcie-starfive",
> + .of_match_table = of_match_ptr(starfive_pcie_of_match),
> + .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
> + },
> + .probe = starfive_pcie_probe,
> + .remove_new = starfive_pcie_remove,
> +};
> +module_platform_driver(starfive_pcie_driver);
> +
> +MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 5ecbcf041179..7b35c06d05b5 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -22,6 +22,13 @@
> */
> #define PCIE_PME_TO_L2_TIMEOUT_US 10000
>
> +/*
> + * PCIe r6.0, sec 6.6.1, <Conventional Reset>
> + * Requires a minimum waiting of 100ms before sending a configuration
> + * request to the device.
> + */
> +#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
> +
> extern const unsigned char pcie_link_speed[];
> extern bool pci_early_dump;
>
Hi Bjorn
I have not checked this carefully.
I think the change of pci.h should be moved to a indepent patch. Could you approve this? Kevin will commit a new patch for this. Next version I will remove this change.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-11-20 10:07 ` Minda Chen
@ 2023-11-20 18:23 ` Bjorn Helgaas
-1 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-11-20 18:23 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Mon, Nov 20, 2023 at 06:07:31PM +0800, Minda Chen wrote:
> On 2023/11/15 19:49, Minda Chen wrote:
> > Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
> > with PLDA host PCIe core.
> ...
> > --- a/drivers/pci/pci.h
> > +++ b/drivers/pci/pci.h
> > @@ -22,6 +22,13 @@
> > */
> > #define PCIE_PME_TO_L2_TIMEOUT_US 10000
> >
> > +/*
> > + * PCIe r6.0, sec 6.6.1, <Conventional Reset>
> > + * Requires a minimum waiting of 100ms before sending a configuration
> > + * request to the device.
> > + */
> > +#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
> > +
> > extern const unsigned char pcie_link_speed[];
> > extern bool pci_early_dump;
> >
> Hi Bjorn
> I have not checked this carefully.
> I think the change of pci.h should be moved to a indepent patch.
> Could you approve this? Kevin will commit a new patch for this.
> Next version I will remove this change.
Yes, I think it makes sense to add that #define in a separate patch.
Please trim out the unnecessary context; there's no need for readers
to scroll through the entire driver to get to the useful part, which
is just the last dozen lines or so.
Bjorn
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-11-20 18:23 ` Bjorn Helgaas
0 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-11-20 18:23 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Mon, Nov 20, 2023 at 06:07:31PM +0800, Minda Chen wrote:
> On 2023/11/15 19:49, Minda Chen wrote:
> > Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
> > with PLDA host PCIe core.
> ...
> > --- a/drivers/pci/pci.h
> > +++ b/drivers/pci/pci.h
> > @@ -22,6 +22,13 @@
> > */
> > #define PCIE_PME_TO_L2_TIMEOUT_US 10000
> >
> > +/*
> > + * PCIe r6.0, sec 6.6.1, <Conventional Reset>
> > + * Requires a minimum waiting of 100ms before sending a configuration
> > + * request to the device.
> > + */
> > +#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
> > +
> > extern const unsigned char pcie_link_speed[];
> > extern bool pci_early_dump;
> >
> Hi Bjorn
> I have not checked this carefully.
> I think the change of pci.h should be moved to a indepent patch.
> Could you approve this? Kevin will commit a new patch for this.
> Next version I will remove this change.
Yes, I think it makes sense to add that #define in a separate patch.
Please trim out the unnecessary context; there's no need for readers
to scroll through the entire driver to get to the useful part, which
is just the last dozen lines or so.
Bjorn
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-11-20 18:23 ` Bjorn Helgaas
@ 2023-11-21 0:52 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-21 0:52 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/21 2:23, Bjorn Helgaas wrote:
> On Mon, Nov 20, 2023 at 06:07:31PM +0800, Minda Chen wrote:
>> On 2023/11/15 19:49, Minda Chen wrote:
>> > Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
>> > with PLDA host PCIe core.
>> ...
>
>> > --- a/drivers/pci/pci.h
>> > +++ b/drivers/pci/pci.h
>> > @@ -22,6 +22,13 @@
>> > */
>> > #define PCIE_PME_TO_L2_TIMEOUT_US 10000
>> >
>> > +/*
>> > + * PCIe r6.0, sec 6.6.1, <Conventional Reset>
>> > + * Requires a minimum waiting of 100ms before sending a configuration
>> > + * request to the device.
>> > + */
>> > +#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
>> > +
>> > extern const unsigned char pcie_link_speed[];
>> > extern bool pci_early_dump;
>> >
>> Hi Bjorn
>> I have not checked this carefully.
>> I think the change of pci.h should be moved to a indepent patch.
>> Could you approve this? Kevin will commit a new patch for this.
>> Next version I will remove this change.
>
> Yes, I think it makes sense to add that #define in a separate patch.
>
> Please trim out the unnecessary context; there's no need for readers
> to scroll through the entire driver to get to the useful part, which
> is just the last dozen lines or so.
>
> Bjorn
Thanks. I will notice this next time.
Happy Thanksgiving! Wish you and Rob have a good holiday.
BTW. Could you give any comments to Refactoring patches (patch 2 - patch 16)and PLDA patch(patch 17) next week? Thanks.
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-11-21 0:52 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-21 0:52 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/21 2:23, Bjorn Helgaas wrote:
> On Mon, Nov 20, 2023 at 06:07:31PM +0800, Minda Chen wrote:
>> On 2023/11/15 19:49, Minda Chen wrote:
>> > Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
>> > with PLDA host PCIe core.
>> ...
>
>> > --- a/drivers/pci/pci.h
>> > +++ b/drivers/pci/pci.h
>> > @@ -22,6 +22,13 @@
>> > */
>> > #define PCIE_PME_TO_L2_TIMEOUT_US 10000
>> >
>> > +/*
>> > + * PCIe r6.0, sec 6.6.1, <Conventional Reset>
>> > + * Requires a minimum waiting of 100ms before sending a configuration
>> > + * request to the device.
>> > + */
>> > +#define PCIE_BEFORE_CONFIG_REQUEST_WAIT_MS 100
>> > +
>> > extern const unsigned char pcie_link_speed[];
>> > extern bool pci_early_dump;
>> >
>> Hi Bjorn
>> I have not checked this carefully.
>> I think the change of pci.h should be moved to a indepent patch.
>> Could you approve this? Kevin will commit a new patch for this.
>> Next version I will remove this change.
>
> Yes, I think it makes sense to add that #define in a separate patch.
>
> Please trim out the unnecessary context; there's no need for readers
> to scroll through the entire driver to get to the useful part, which
> is just the last dozen lines or so.
>
> Bjorn
Thanks. I will notice this next time.
Happy Thanksgiving! Wish you and Rob have a good holiday.
BTW. Could you give any comments to Refactoring patches (patch 2 - patch 16)and PLDA patch(patch 17) next week? Thanks.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-11-21 0:52 ` Minda Chen
@ 2023-11-21 21:32 ` Bjorn Helgaas
-1 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-11-21 21:32 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Tue, Nov 21, 2023 at 08:52:21AM +0800, Minda Chen wrote:
> ...
> BTW. Could you give any comments to Refactoring patches (patch 2 -
> patch 16)and PLDA patch(patch 17) next week? Thanks.
I think Krzysztof or Lorenzo will handle these. I skimmed them and
didn't see any major problems.
Bjorn
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-11-21 21:32 ` Bjorn Helgaas
0 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-11-21 21:32 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Tue, Nov 21, 2023 at 08:52:21AM +0800, Minda Chen wrote:
> ...
> BTW. Could you give any comments to Refactoring patches (patch 2 -
> patch 16)and PLDA patch(patch 17) next week? Thanks.
I think Krzysztof or Lorenzo will handle these. I skimmed them and
didn't see any major problems.
Bjorn
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-11-21 21:32 ` Bjorn Helgaas
@ 2023-11-23 11:42 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-23 11:42 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/22 5:32, Bjorn Helgaas wrote:
> On Tue, Nov 21, 2023 at 08:52:21AM +0800, Minda Chen wrote:
>> ...
>> BTW. Could you give any comments to Refactoring patches (patch 2 -
>> patch 16)and PLDA patch(patch 17) next week? Thanks.
>
> I think Krzysztof or Lorenzo will handle these. I skimmed them and
> didn't see any major problems.
>
> Bjorn
Hi Krzysztof and Lorenzo
Could you review and give some comments to this series patches? Thanks.
On microchip side, Conor have reviewed all the Refactoring patches.
Hope this series patches can be accepted in kernel v6.8
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-11-23 11:42 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-11-23 11:42 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/22 5:32, Bjorn Helgaas wrote:
> On Tue, Nov 21, 2023 at 08:52:21AM +0800, Minda Chen wrote:
>> ...
>> BTW. Could you give any comments to Refactoring patches (patch 2 -
>> patch 16)and PLDA patch(patch 17) next week? Thanks.
>
> I think Krzysztof or Lorenzo will handle these. I skimmed them and
> didn't see any major problems.
>
> Bjorn
Hi Krzysztof and Lorenzo
Could you review and give some comments to this series patches? Thanks.
On microchip side, Conor have reviewed all the Refactoring patches.
Hope this series patches can be accepted in kernel v6.8
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-11-15 11:48 ` Minda Chen
@ 2023-11-29 6:39 ` Damian Tometzki
-1 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-11-29 6:39 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
Hello Minda,
i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
/root partition /dev/nvme0n1p4.
I dont know if it has anything to do with this patchset ?
Best regards
Damian
On Wed, 15. Nov 19:48, Minda Chen wrote:
> This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> same IP and have commit their codes, which are mixed with PLDA
> controller codes and Microchip platform codes.
>
> For re-use the PLDA controller codes, I request refactoring microchip
> codes, move PLDA common codes to PLDA files.
> Desigware and Cadence is good example for refactoring codes.
>
> ----------------------------------------------------------
> The refactoring patches total number is 16,(patch 1-16)
> which do NOT contain changing logic of codes.
>
> These patches just contain three type basic operations.
> (rename, modify codes to support starfive platform, and moving to common file)
> If these patched are all be reviewed. They can be accepted first.
>
> Refactoring patches can be devided to different groups
> 1. (patch 1- 3 is the prepare work of refactoring)
> patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
> docs from microchip,pcie-host.yaml
> patch2 is move PolarFire codes to PLDA directory.
> patch3 is move PLDA IP register macros to plda-pcie.h
>
> 2. (patch4 - 6 is processing and re-use PCIe host instance)
> patch4 is add bridge_addr field to PCIe host instance.
> patch5 is rename data structure in microchip codes.
> patch6 is moving two data structures to head file
>
> 3. (patch 7 - 9 are for re-use two PCIe setup function)
> patch7 is rename two setup functions in microchip codes, prepare to move
> to common file.
> patch8 is change the arguments of plda_pcie_setup_iomems()
> patch9 is move the two setup functions to common file pcie-plda-host.c
>
> 4.(patch 10 - 16 are for re-use interupt processing codes)
> patch10 is rename the IRQ related functions, prepare to move to
> pcie-plda-host.c
> patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
> and microchip two platforms.
> patch16 is move IRQ related functions to pcie-plda-host.c
>
> ------------------------------------------------------------
> The remainder patches (patch 17 -20) are not refactoring patch.
> They are for adding StarFive codes and dont modify the microchip's
> codes.
>
> patch17 is Add PLDA event interrupt codes and host init/deinit functions.
> patch18 is add StarFive JH7110 PCIe dt-binding doc.
> patch19 is add StarFive JH7110 Soc PCIe codes.
> patch20 is Starfive dts config
>
> This patchset is base on v6.7-rc1
>
> previous version:
> v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
> v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
> v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
> v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
> v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
>
> change:
> v11:
> check and modify some commit messages again.
> All the codes are the same with v10.
>
> v10:
> All the commit message set to fit in 75 columns.
> All the codes fit in less than 80 colunms.
> patch 14:
> Commit message changes suggested by Conor.
> patch 19:
> Add 100 ms delay macro to pci.h
> generic phy pointer related codes moving to pcie-starfive.c
> This patch Change pcie-starfive only, bus_ops move to patch 16.
> Some Codes changes suggested by Bjorn.
>
> v9:
> v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
> patch 4 - 16: Add new review tags and add more accurate commit messages.
> patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
> plda driver become to whole driver.
>
> v8:
> The patch description in cover-letter has been changed.
>
> v7 patch 4 split to v8 patch 4 - 6.
> (It is patches about re-use pcie host data structure, new patches just contain one
> function modification. It is more reguluar and easier to review).
>
> patch 7- 9: modify the commit messages and add reason of
> modifcation.
> patch10- 16 :
> Add review tag and add more commit messages to declear the
> reason of modifying the codes.
> patch17: plda_handle_events() using bit mask macro. The function are
> easier to read.
>
> v7:
> patch17: fix the build warning.
> patch19: Some format changes (Emil's comment)
> patch20: change the pcie node sequences by alphabetical
> delete the "interupt-parent" in pcie node.
>
> v6:
> v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
>
> patch 9: Just move the two setup functions only
> patch 19 : draw a graph of PLDA local register, make it easier to
> review the codes.
> v5 patch 7 split to patch 10- 16. Each patch just contain one
> function modification. It is more regular.
> patch 10: rename IRQ related functions.
> patch 11 - 15 : modify the events codes, total five patch.
> patch 16: move IRQ related functions to pcie-plda-host.c
> patch 19- 20 using "linux,pci-domain" dts setting.
>
> Minda Chen (20):
> dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
> PCI: microchip: Move pcie-microchip-host.c to plda directory
> PCI: microchip: Move PLDA IP register macros to pcie-plda.h
> PCI: microchip: Add bridge_addr field to struct mc_pcie
> PCI: microchip: Rename two PCIe data structures
> PCI: microchip: Move PCIe host data structures to plda-pcie.h
> PCI: microchip: Rename two setup functions
> PCI: microchip: Change the argument of plda_pcie_setup_iomems()
> PCI: microchip: Move setup functions to pcie-plda-host.c
> PCI: microchip: Rename interrupt related functions
> PCI: microchip: Add num_events field to struct plda_pcie_rp
> PCI: microchip: Add request_event_irq() callback function
> PCI: microchip: Add INTx and MSI event num to struct plda_event
> PCI: microchip: Add get_events() callback function
> PCI: microchip: Add event IRQ domain ops to struct plda_event
> PCI: microchip: Move IRQ functions to pcie-plda-host.c
> PCI: plda: Add event interrupt codes and host init/deinit functions
> dt-bindings: PCI: Add StarFive JH7110 PCIe controller
> PCI: starfive: Add JH7110 PCIe controller
> riscv: dts: starfive: add PCIe dts configuration for JH7110
>
> .../bindings/pci/microchip,pcie-host.yaml | 55 +-
> .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
> .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
> MAINTAINERS | 19 +-
> .../jh7110-starfive-visionfive-2.dtsi | 64 ++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
> drivers/pci/controller/Kconfig | 9 +-
> drivers/pci/controller/Makefile | 2 +-
> drivers/pci/controller/plda/Kconfig | 29 +
> drivers/pci/controller/plda/Makefile | 4 +
> .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
> drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
> drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
> drivers/pci/pci.h | 7 +
> 15 files changed, 1851 insertions(+), 604 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> create mode 100644 drivers/pci/controller/plda/Kconfig
> create mode 100644 drivers/pci/controller/plda/Makefile
> rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
> create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> create mode 100644 drivers/pci/controller/plda/pcie-plda.h
> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>
>
> base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-11-29 6:39 ` Damian Tometzki
0 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-11-29 6:39 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
Hello Minda,
i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
/root partition /dev/nvme0n1p4.
I dont know if it has anything to do with this patchset ?
Best regards
Damian
On Wed, 15. Nov 19:48, Minda Chen wrote:
> This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> same IP and have commit their codes, which are mixed with PLDA
> controller codes and Microchip platform codes.
>
> For re-use the PLDA controller codes, I request refactoring microchip
> codes, move PLDA common codes to PLDA files.
> Desigware and Cadence is good example for refactoring codes.
>
> ----------------------------------------------------------
> The refactoring patches total number is 16,(patch 1-16)
> which do NOT contain changing logic of codes.
>
> These patches just contain three type basic operations.
> (rename, modify codes to support starfive platform, and moving to common file)
> If these patched are all be reviewed. They can be accepted first.
>
> Refactoring patches can be devided to different groups
> 1. (patch 1- 3 is the prepare work of refactoring)
> patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
> docs from microchip,pcie-host.yaml
> patch2 is move PolarFire codes to PLDA directory.
> patch3 is move PLDA IP register macros to plda-pcie.h
>
> 2. (patch4 - 6 is processing and re-use PCIe host instance)
> patch4 is add bridge_addr field to PCIe host instance.
> patch5 is rename data structure in microchip codes.
> patch6 is moving two data structures to head file
>
> 3. (patch 7 - 9 are for re-use two PCIe setup function)
> patch7 is rename two setup functions in microchip codes, prepare to move
> to common file.
> patch8 is change the arguments of plda_pcie_setup_iomems()
> patch9 is move the two setup functions to common file pcie-plda-host.c
>
> 4.(patch 10 - 16 are for re-use interupt processing codes)
> patch10 is rename the IRQ related functions, prepare to move to
> pcie-plda-host.c
> patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
> and microchip two platforms.
> patch16 is move IRQ related functions to pcie-plda-host.c
>
> ------------------------------------------------------------
> The remainder patches (patch 17 -20) are not refactoring patch.
> They are for adding StarFive codes and dont modify the microchip's
> codes.
>
> patch17 is Add PLDA event interrupt codes and host init/deinit functions.
> patch18 is add StarFive JH7110 PCIe dt-binding doc.
> patch19 is add StarFive JH7110 Soc PCIe codes.
> patch20 is Starfive dts config
>
> This patchset is base on v6.7-rc1
>
> previous version:
> v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
> v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
> v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
> v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
> v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
>
> change:
> v11:
> check and modify some commit messages again.
> All the codes are the same with v10.
>
> v10:
> All the commit message set to fit in 75 columns.
> All the codes fit in less than 80 colunms.
> patch 14:
> Commit message changes suggested by Conor.
> patch 19:
> Add 100 ms delay macro to pci.h
> generic phy pointer related codes moving to pcie-starfive.c
> This patch Change pcie-starfive only, bus_ops move to patch 16.
> Some Codes changes suggested by Bjorn.
>
> v9:
> v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
> patch 4 - 16: Add new review tags and add more accurate commit messages.
> patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
> plda driver become to whole driver.
>
> v8:
> The patch description in cover-letter has been changed.
>
> v7 patch 4 split to v8 patch 4 - 6.
> (It is patches about re-use pcie host data structure, new patches just contain one
> function modification. It is more reguluar and easier to review).
>
> patch 7- 9: modify the commit messages and add reason of
> modifcation.
> patch10- 16 :
> Add review tag and add more commit messages to declear the
> reason of modifying the codes.
> patch17: plda_handle_events() using bit mask macro. The function are
> easier to read.
>
> v7:
> patch17: fix the build warning.
> patch19: Some format changes (Emil's comment)
> patch20: change the pcie node sequences by alphabetical
> delete the "interupt-parent" in pcie node.
>
> v6:
> v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
>
> patch 9: Just move the two setup functions only
> patch 19 : draw a graph of PLDA local register, make it easier to
> review the codes.
> v5 patch 7 split to patch 10- 16. Each patch just contain one
> function modification. It is more regular.
> patch 10: rename IRQ related functions.
> patch 11 - 15 : modify the events codes, total five patch.
> patch 16: move IRQ related functions to pcie-plda-host.c
> patch 19- 20 using "linux,pci-domain" dts setting.
>
> Minda Chen (20):
> dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
> PCI: microchip: Move pcie-microchip-host.c to plda directory
> PCI: microchip: Move PLDA IP register macros to pcie-plda.h
> PCI: microchip: Add bridge_addr field to struct mc_pcie
> PCI: microchip: Rename two PCIe data structures
> PCI: microchip: Move PCIe host data structures to plda-pcie.h
> PCI: microchip: Rename two setup functions
> PCI: microchip: Change the argument of plda_pcie_setup_iomems()
> PCI: microchip: Move setup functions to pcie-plda-host.c
> PCI: microchip: Rename interrupt related functions
> PCI: microchip: Add num_events field to struct plda_pcie_rp
> PCI: microchip: Add request_event_irq() callback function
> PCI: microchip: Add INTx and MSI event num to struct plda_event
> PCI: microchip: Add get_events() callback function
> PCI: microchip: Add event IRQ domain ops to struct plda_event
> PCI: microchip: Move IRQ functions to pcie-plda-host.c
> PCI: plda: Add event interrupt codes and host init/deinit functions
> dt-bindings: PCI: Add StarFive JH7110 PCIe controller
> PCI: starfive: Add JH7110 PCIe controller
> riscv: dts: starfive: add PCIe dts configuration for JH7110
>
> .../bindings/pci/microchip,pcie-host.yaml | 55 +-
> .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
> .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
> MAINTAINERS | 19 +-
> .../jh7110-starfive-visionfive-2.dtsi | 64 ++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
> drivers/pci/controller/Kconfig | 9 +-
> drivers/pci/controller/Makefile | 2 +-
> drivers/pci/controller/plda/Kconfig | 29 +
> drivers/pci/controller/plda/Makefile | 4 +
> .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
> drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
> drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
> drivers/pci/pci.h | 7 +
> 15 files changed, 1851 insertions(+), 604 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> create mode 100644 drivers/pci/controller/plda/Kconfig
> create mode 100644 drivers/pci/controller/plda/Makefile
> rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
> create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> create mode 100644 drivers/pci/controller/plda/pcie-plda.h
> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>
>
> base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
> --
> 2.17.1
>
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-11-29 6:39 ` Damian Tometzki
@ 2023-11-29 11:32 ` Damian Tometzki
-1 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-11-29 11:32 UTC (permalink / raw)
To: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Wed, 29. Nov 07:39, Damian Tometzki wrote:
> Hello Minda,
>
> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
> /root partition /dev/nvme0n1p4.
> I dont know if it has anything to do with this patchset ?
> Best regards
> Damian
Hi,
some additional information:
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
[ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
[ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
[ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
[ 11.126371] platform 17020000.pinctrl: deferred probe pending
[ 11.132145] platform 16010000.mmc: deferred probe pending
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Damian
>
> On Wed, 15. Nov 19:48, Minda Chen wrote:
> > This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> > JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> > same IP and have commit their codes, which are mixed with PLDA
> > controller codes and Microchip platform codes.
> >
> > For re-use the PLDA controller codes, I request refactoring microchip
> > codes, move PLDA common codes to PLDA files.
> > Desigware and Cadence is good example for refactoring codes.
> >
> > ----------------------------------------------------------
> > The refactoring patches total number is 16,(patch 1-16)
> > which do NOT contain changing logic of codes.
> >
> > These patches just contain three type basic operations.
> > (rename, modify codes to support starfive platform, and moving to common file)
> > If these patched are all be reviewed. They can be accepted first.
> >
> > Refactoring patches can be devided to different groups
> > 1. (patch 1- 3 is the prepare work of refactoring)
> > patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
> > docs from microchip,pcie-host.yaml
> > patch2 is move PolarFire codes to PLDA directory.
> > patch3 is move PLDA IP register macros to plda-pcie.h
> >
> > 2. (patch4 - 6 is processing and re-use PCIe host instance)
> > patch4 is add bridge_addr field to PCIe host instance.
> > patch5 is rename data structure in microchip codes.
> > patch6 is moving two data structures to head file
> >
> > 3. (patch 7 - 9 are for re-use two PCIe setup function)
> > patch7 is rename two setup functions in microchip codes, prepare to move
> > to common file.
> > patch8 is change the arguments of plda_pcie_setup_iomems()
> > patch9 is move the two setup functions to common file pcie-plda-host.c
> >
> > 4.(patch 10 - 16 are for re-use interupt processing codes)
> > patch10 is rename the IRQ related functions, prepare to move to
> > pcie-plda-host.c
> > patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
> > and microchip two platforms.
> > patch16 is move IRQ related functions to pcie-plda-host.c
> >
> > ------------------------------------------------------------
> > The remainder patches (patch 17 -20) are not refactoring patch.
> > They are for adding StarFive codes and dont modify the microchip's
> > codes.
> >
> > patch17 is Add PLDA event interrupt codes and host init/deinit functions.
> > patch18 is add StarFive JH7110 PCIe dt-binding doc.
> > patch19 is add StarFive JH7110 Soc PCIe codes.
> > patch20 is Starfive dts config
> >
> > This patchset is base on v6.7-rc1
> >
> > previous version:
> > v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
> > v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
> > v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
> > v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
> > v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
> >
> > change:
> > v11:
> > check and modify some commit messages again.
> > All the codes are the same with v10.
> >
> > v10:
> > All the commit message set to fit in 75 columns.
> > All the codes fit in less than 80 colunms.
> > patch 14:
> > Commit message changes suggested by Conor.
> > patch 19:
> > Add 100 ms delay macro to pci.h
> > generic phy pointer related codes moving to pcie-starfive.c
> > This patch Change pcie-starfive only, bus_ops move to patch 16.
> > Some Codes changes suggested by Bjorn.
> >
> > v9:
> > v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
> > patch 4 - 16: Add new review tags and add more accurate commit messages.
> > patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
> > plda driver become to whole driver.
> >
> > v8:
> > The patch description in cover-letter has been changed.
> >
> > v7 patch 4 split to v8 patch 4 - 6.
> > (It is patches about re-use pcie host data structure, new patches just contain one
> > function modification. It is more reguluar and easier to review).
> >
> > patch 7- 9: modify the commit messages and add reason of
> > modifcation.
> > patch10- 16 :
> > Add review tag and add more commit messages to declear the
> > reason of modifying the codes.
> > patch17: plda_handle_events() using bit mask macro. The function are
> > easier to read.
> >
> > v7:
> > patch17: fix the build warning.
> > patch19: Some format changes (Emil's comment)
> > patch20: change the pcie node sequences by alphabetical
> > delete the "interupt-parent" in pcie node.
> >
> > v6:
> > v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
> >
> > patch 9: Just move the two setup functions only
> > patch 19 : draw a graph of PLDA local register, make it easier to
> > review the codes.
> > v5 patch 7 split to patch 10- 16. Each patch just contain one
> > function modification. It is more regular.
> > patch 10: rename IRQ related functions.
> > patch 11 - 15 : modify the events codes, total five patch.
> > patch 16: move IRQ related functions to pcie-plda-host.c
> > patch 19- 20 using "linux,pci-domain" dts setting.
> >
> > Minda Chen (20):
> > dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
> > PCI: microchip: Move pcie-microchip-host.c to plda directory
> > PCI: microchip: Move PLDA IP register macros to pcie-plda.h
> > PCI: microchip: Add bridge_addr field to struct mc_pcie
> > PCI: microchip: Rename two PCIe data structures
> > PCI: microchip: Move PCIe host data structures to plda-pcie.h
> > PCI: microchip: Rename two setup functions
> > PCI: microchip: Change the argument of plda_pcie_setup_iomems()
> > PCI: microchip: Move setup functions to pcie-plda-host.c
> > PCI: microchip: Rename interrupt related functions
> > PCI: microchip: Add num_events field to struct plda_pcie_rp
> > PCI: microchip: Add request_event_irq() callback function
> > PCI: microchip: Add INTx and MSI event num to struct plda_event
> > PCI: microchip: Add get_events() callback function
> > PCI: microchip: Add event IRQ domain ops to struct plda_event
> > PCI: microchip: Move IRQ functions to pcie-plda-host.c
> > PCI: plda: Add event interrupt codes and host init/deinit functions
> > dt-bindings: PCI: Add StarFive JH7110 PCIe controller
> > PCI: starfive: Add JH7110 PCIe controller
> > riscv: dts: starfive: add PCIe dts configuration for JH7110
> >
> > .../bindings/pci/microchip,pcie-host.yaml | 55 +-
> > .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
> > .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
> > MAINTAINERS | 19 +-
> > .../jh7110-starfive-visionfive-2.dtsi | 64 ++
> > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
> > drivers/pci/controller/Kconfig | 9 +-
> > drivers/pci/controller/Makefile | 2 +-
> > drivers/pci/controller/plda/Kconfig | 29 +
> > drivers/pci/controller/plda/Makefile | 4 +
> > .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
> > drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
> > drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
> > drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
> > drivers/pci/pci.h | 7 +
> > 15 files changed, 1851 insertions(+), 604 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> > create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> > create mode 100644 drivers/pci/controller/plda/Kconfig
> > create mode 100644 drivers/pci/controller/plda/Makefile
> > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
> > create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> > create mode 100644 drivers/pci/controller/plda/pcie-plda.h
> > create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >
> >
> > base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
> > --
> > 2.17.1
> >
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-11-29 11:32 ` Damian Tometzki
0 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-11-29 11:32 UTC (permalink / raw)
To: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Wed, 29. Nov 07:39, Damian Tometzki wrote:
> Hello Minda,
>
> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
> /root partition /dev/nvme0n1p4.
> I dont know if it has anything to do with this patchset ?
> Best regards
> Damian
Hi,
some additional information:
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
[ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
[ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
[ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
[ 11.126371] platform 17020000.pinctrl: deferred probe pending
[ 11.132145] platform 16010000.mmc: deferred probe pending
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Damian
>
> On Wed, 15. Nov 19:48, Minda Chen wrote:
> > This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> > JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> > same IP and have commit their codes, which are mixed with PLDA
> > controller codes and Microchip platform codes.
> >
> > For re-use the PLDA controller codes, I request refactoring microchip
> > codes, move PLDA common codes to PLDA files.
> > Desigware and Cadence is good example for refactoring codes.
> >
> > ----------------------------------------------------------
> > The refactoring patches total number is 16,(patch 1-16)
> > which do NOT contain changing logic of codes.
> >
> > These patches just contain three type basic operations.
> > (rename, modify codes to support starfive platform, and moving to common file)
> > If these patched are all be reviewed. They can be accepted first.
> >
> > Refactoring patches can be devided to different groups
> > 1. (patch 1- 3 is the prepare work of refactoring)
> > patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
> > docs from microchip,pcie-host.yaml
> > patch2 is move PolarFire codes to PLDA directory.
> > patch3 is move PLDA IP register macros to plda-pcie.h
> >
> > 2. (patch4 - 6 is processing and re-use PCIe host instance)
> > patch4 is add bridge_addr field to PCIe host instance.
> > patch5 is rename data structure in microchip codes.
> > patch6 is moving two data structures to head file
> >
> > 3. (patch 7 - 9 are for re-use two PCIe setup function)
> > patch7 is rename two setup functions in microchip codes, prepare to move
> > to common file.
> > patch8 is change the arguments of plda_pcie_setup_iomems()
> > patch9 is move the two setup functions to common file pcie-plda-host.c
> >
> > 4.(patch 10 - 16 are for re-use interupt processing codes)
> > patch10 is rename the IRQ related functions, prepare to move to
> > pcie-plda-host.c
> > patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
> > and microchip two platforms.
> > patch16 is move IRQ related functions to pcie-plda-host.c
> >
> > ------------------------------------------------------------
> > The remainder patches (patch 17 -20) are not refactoring patch.
> > They are for adding StarFive codes and dont modify the microchip's
> > codes.
> >
> > patch17 is Add PLDA event interrupt codes and host init/deinit functions.
> > patch18 is add StarFive JH7110 PCIe dt-binding doc.
> > patch19 is add StarFive JH7110 Soc PCIe codes.
> > patch20 is Starfive dts config
> >
> > This patchset is base on v6.7-rc1
> >
> > previous version:
> > v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
> > v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
> > v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
> > v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
> > v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
> >
> > change:
> > v11:
> > check and modify some commit messages again.
> > All the codes are the same with v10.
> >
> > v10:
> > All the commit message set to fit in 75 columns.
> > All the codes fit in less than 80 colunms.
> > patch 14:
> > Commit message changes suggested by Conor.
> > patch 19:
> > Add 100 ms delay macro to pci.h
> > generic phy pointer related codes moving to pcie-starfive.c
> > This patch Change pcie-starfive only, bus_ops move to patch 16.
> > Some Codes changes suggested by Bjorn.
> >
> > v9:
> > v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
> > patch 4 - 16: Add new review tags and add more accurate commit messages.
> > patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
> > plda driver become to whole driver.
> >
> > v8:
> > The patch description in cover-letter has been changed.
> >
> > v7 patch 4 split to v8 patch 4 - 6.
> > (It is patches about re-use pcie host data structure, new patches just contain one
> > function modification. It is more reguluar and easier to review).
> >
> > patch 7- 9: modify the commit messages and add reason of
> > modifcation.
> > patch10- 16 :
> > Add review tag and add more commit messages to declear the
> > reason of modifying the codes.
> > patch17: plda_handle_events() using bit mask macro. The function are
> > easier to read.
> >
> > v7:
> > patch17: fix the build warning.
> > patch19: Some format changes (Emil's comment)
> > patch20: change the pcie node sequences by alphabetical
> > delete the "interupt-parent" in pcie node.
> >
> > v6:
> > v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
> >
> > patch 9: Just move the two setup functions only
> > patch 19 : draw a graph of PLDA local register, make it easier to
> > review the codes.
> > v5 patch 7 split to patch 10- 16. Each patch just contain one
> > function modification. It is more regular.
> > patch 10: rename IRQ related functions.
> > patch 11 - 15 : modify the events codes, total five patch.
> > patch 16: move IRQ related functions to pcie-plda-host.c
> > patch 19- 20 using "linux,pci-domain" dts setting.
> >
> > Minda Chen (20):
> > dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
> > PCI: microchip: Move pcie-microchip-host.c to plda directory
> > PCI: microchip: Move PLDA IP register macros to pcie-plda.h
> > PCI: microchip: Add bridge_addr field to struct mc_pcie
> > PCI: microchip: Rename two PCIe data structures
> > PCI: microchip: Move PCIe host data structures to plda-pcie.h
> > PCI: microchip: Rename two setup functions
> > PCI: microchip: Change the argument of plda_pcie_setup_iomems()
> > PCI: microchip: Move setup functions to pcie-plda-host.c
> > PCI: microchip: Rename interrupt related functions
> > PCI: microchip: Add num_events field to struct plda_pcie_rp
> > PCI: microchip: Add request_event_irq() callback function
> > PCI: microchip: Add INTx and MSI event num to struct plda_event
> > PCI: microchip: Add get_events() callback function
> > PCI: microchip: Add event IRQ domain ops to struct plda_event
> > PCI: microchip: Move IRQ functions to pcie-plda-host.c
> > PCI: plda: Add event interrupt codes and host init/deinit functions
> > dt-bindings: PCI: Add StarFive JH7110 PCIe controller
> > PCI: starfive: Add JH7110 PCIe controller
> > riscv: dts: starfive: add PCIe dts configuration for JH7110
> >
> > .../bindings/pci/microchip,pcie-host.yaml | 55 +-
> > .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
> > .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
> > MAINTAINERS | 19 +-
> > .../jh7110-starfive-visionfive-2.dtsi | 64 ++
> > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
> > drivers/pci/controller/Kconfig | 9 +-
> > drivers/pci/controller/Makefile | 2 +-
> > drivers/pci/controller/plda/Kconfig | 29 +
> > drivers/pci/controller/plda/Makefile | 4 +
> > .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
> > drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
> > drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
> > drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
> > drivers/pci/pci.h | 7 +
> > 15 files changed, 1851 insertions(+), 604 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> > create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> > create mode 100644 drivers/pci/controller/plda/Kconfig
> > create mode 100644 drivers/pci/controller/plda/Makefile
> > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
> > create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> > create mode 100644 drivers/pci/controller/plda/pcie-plda.h
> > create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >
> >
> > base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
> > --
> > 2.17.1
> >
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-11-29 11:32 ` Damian Tometzki
@ 2023-12-01 7:15 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-01 7:15 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/29 19:32, Damian Tometzki wrote:
> On Wed, 29. Nov 07:39, Damian Tometzki wrote:
>> Hello Minda,
>>
>> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
>> /root partition /dev/nvme0n1p4.
>> I dont know if it has anything to do with this patchset ?
>> Best regards
>> Damian
> Hi,
> some additional information:
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> [ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
> [ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
> [ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
> [ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
> [ 11.126371] platform 17020000.pinctrl: deferred probe pending
> [ 11.132145] platform 16010000.mmc: deferred probe pending
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
>
> Damian
>
It is get stg clk failed. Did you enable CONFIG_CLK_STARFIVE_JH7110_STG=y?
>>
>> On Wed, 15. Nov 19:48, Minda Chen wrote:
>> > This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
>> > JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
>> > same IP and have commit their codes, which are mixed with PLDA
>> > controller codes and Microchip platform codes.
>> >
>> > For re-use the PLDA controller codes, I request refactoring microchip
>> > codes, move PLDA common codes to PLDA files.
>> > Desigware and Cadence is good example for refactoring codes.
>> >
>> > ----------------------------------------------------------
>> > The refactoring patches total number is 16,(patch 1-16)
>> > which do NOT contain changing logic of codes.
>> >
>> > These patches just contain three type basic operations.
>> > (rename, modify codes to support starfive platform, and moving to common file)
>> > If these patched are all be reviewed. They can be accepted first.
>> >
>> > Refactoring patches can be devided to different groups
>> > 1. (patch 1- 3 is the prepare work of refactoring)
>> > patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
>> > docs from microchip,pcie-host.yaml
>> > patch2 is move PolarFire codes to PLDA directory.
>> > patch3 is move PLDA IP register macros to plda-pcie.h
>> >
>> > 2. (patch4 - 6 is processing and re-use PCIe host instance)
>> > patch4 is add bridge_addr field to PCIe host instance.
>> > patch5 is rename data structure in microchip codes.
>> > patch6 is moving two data structures to head file
>> >
>> > 3. (patch 7 - 9 are for re-use two PCIe setup function)
>> > patch7 is rename two setup functions in microchip codes, prepare to move
>> > to common file.
>> > patch8 is change the arguments of plda_pcie_setup_iomems()
>> > patch9 is move the two setup functions to common file pcie-plda-host.c
>> >
>> > 4.(patch 10 - 16 are for re-use interupt processing codes)
>> > patch10 is rename the IRQ related functions, prepare to move to
>> > pcie-plda-host.c
>> > patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
>> > and microchip two platforms.
>> > patch16 is move IRQ related functions to pcie-plda-host.c
>> >
>> > ------------------------------------------------------------
>> > The remainder patches (patch 17 -20) are not refactoring patch.
>> > They are for adding StarFive codes and dont modify the microchip's
>> > codes.
>> >
>> > patch17 is Add PLDA event interrupt codes and host init/deinit functions.
>> > patch18 is add StarFive JH7110 PCIe dt-binding doc.
>> > patch19 is add StarFive JH7110 Soc PCIe codes.
>> > patch20 is Starfive dts config
>> >
>> > This patchset is base on v6.7-rc1
>> >
>> > previous version:
>> > v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
>> > v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
>> > v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
>> > v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
>> > v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
>> >
>> > change:
>> > v11:
>> > check and modify some commit messages again.
>> > All the codes are the same with v10.
>> >
>> > v10:
>> > All the commit message set to fit in 75 columns.
>> > All the codes fit in less than 80 colunms.
>> > patch 14:
>> > Commit message changes suggested by Conor.
>> > patch 19:
>> > Add 100 ms delay macro to pci.h
>> > generic phy pointer related codes moving to pcie-starfive.c
>> > This patch Change pcie-starfive only, bus_ops move to patch 16.
>> > Some Codes changes suggested by Bjorn.
>> >
>> > v9:
>> > v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
>> > patch 4 - 16: Add new review tags and add more accurate commit messages.
>> > patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
>> > plda driver become to whole driver.
>> >
>> > v8:
>> > The patch description in cover-letter has been changed.
>> >
>> > v7 patch 4 split to v8 patch 4 - 6.
>> > (It is patches about re-use pcie host data structure, new patches just contain one
>> > function modification. It is more reguluar and easier to review).
>> >
>> > patch 7- 9: modify the commit messages and add reason of
>> > modifcation.
>> > patch10- 16 :
>> > Add review tag and add more commit messages to declear the
>> > reason of modifying the codes.
>> > patch17: plda_handle_events() using bit mask macro. The function are
>> > easier to read.
>> >
>> > v7:
>> > patch17: fix the build warning.
>> > patch19: Some format changes (Emil's comment)
>> > patch20: change the pcie node sequences by alphabetical
>> > delete the "interupt-parent" in pcie node.
>> >
>> > v6:
>> > v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
>> >
>> > patch 9: Just move the two setup functions only
>> > patch 19 : draw a graph of PLDA local register, make it easier to
>> > review the codes.
>> > v5 patch 7 split to patch 10- 16. Each patch just contain one
>> > function modification. It is more regular.
>> > patch 10: rename IRQ related functions.
>> > patch 11 - 15 : modify the events codes, total five patch.
>> > patch 16: move IRQ related functions to pcie-plda-host.c
>> > patch 19- 20 using "linux,pci-domain" dts setting.
>> >
>> > Minda Chen (20):
>> > dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
>> > PCI: microchip: Move pcie-microchip-host.c to plda directory
>> > PCI: microchip: Move PLDA IP register macros to pcie-plda.h
>> > PCI: microchip: Add bridge_addr field to struct mc_pcie
>> > PCI: microchip: Rename two PCIe data structures
>> > PCI: microchip: Move PCIe host data structures to plda-pcie.h
>> > PCI: microchip: Rename two setup functions
>> > PCI: microchip: Change the argument of plda_pcie_setup_iomems()
>> > PCI: microchip: Move setup functions to pcie-plda-host.c
>> > PCI: microchip: Rename interrupt related functions
>> > PCI: microchip: Add num_events field to struct plda_pcie_rp
>> > PCI: microchip: Add request_event_irq() callback function
>> > PCI: microchip: Add INTx and MSI event num to struct plda_event
>> > PCI: microchip: Add get_events() callback function
>> > PCI: microchip: Add event IRQ domain ops to struct plda_event
>> > PCI: microchip: Move IRQ functions to pcie-plda-host.c
>> > PCI: plda: Add event interrupt codes and host init/deinit functions
>> > dt-bindings: PCI: Add StarFive JH7110 PCIe controller
>> > PCI: starfive: Add JH7110 PCIe controller
>> > riscv: dts: starfive: add PCIe dts configuration for JH7110
>> >
>> > .../bindings/pci/microchip,pcie-host.yaml | 55 +-
>> > .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
>> > .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
>> > MAINTAINERS | 19 +-
>> > .../jh7110-starfive-visionfive-2.dtsi | 64 ++
>> > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
>> > drivers/pci/controller/Kconfig | 9 +-
>> > drivers/pci/controller/Makefile | 2 +-
>> > drivers/pci/controller/plda/Kconfig | 29 +
>> > drivers/pci/controller/plda/Makefile | 4 +
>> > .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
>> > drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
>> > drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
>> > drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
>> > drivers/pci/pci.h | 7 +
>> > 15 files changed, 1851 insertions(+), 604 deletions(-)
>> > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
>> > create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
>> > create mode 100644 drivers/pci/controller/plda/Kconfig
>> > create mode 100644 drivers/pci/controller/plda/Makefile
>> > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
>> > create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
>> > create mode 100644 drivers/pci/controller/plda/pcie-plda.h
>> > create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>> >
>> >
>> > base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
>> > --
>> > 2.17.1
>> >
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-12-01 7:15 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-01 7:15 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/11/29 19:32, Damian Tometzki wrote:
> On Wed, 29. Nov 07:39, Damian Tometzki wrote:
>> Hello Minda,
>>
>> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
>> /root partition /dev/nvme0n1p4.
>> I dont know if it has anything to do with this patchset ?
>> Best regards
>> Damian
> Hi,
> some additional information:
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> [ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
> [ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
> [ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
> [ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
> [ 11.126371] platform 17020000.pinctrl: deferred probe pending
> [ 11.132145] platform 16010000.mmc: deferred probe pending
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
>
> Damian
>
It is get stg clk failed. Did you enable CONFIG_CLK_STARFIVE_JH7110_STG=y?
>>
>> On Wed, 15. Nov 19:48, Minda Chen wrote:
>> > This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
>> > JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
>> > same IP and have commit their codes, which are mixed with PLDA
>> > controller codes and Microchip platform codes.
>> >
>> > For re-use the PLDA controller codes, I request refactoring microchip
>> > codes, move PLDA common codes to PLDA files.
>> > Desigware and Cadence is good example for refactoring codes.
>> >
>> > ----------------------------------------------------------
>> > The refactoring patches total number is 16,(patch 1-16)
>> > which do NOT contain changing logic of codes.
>> >
>> > These patches just contain three type basic operations.
>> > (rename, modify codes to support starfive platform, and moving to common file)
>> > If these patched are all be reviewed. They can be accepted first.
>> >
>> > Refactoring patches can be devided to different groups
>> > 1. (patch 1- 3 is the prepare work of refactoring)
>> > patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
>> > docs from microchip,pcie-host.yaml
>> > patch2 is move PolarFire codes to PLDA directory.
>> > patch3 is move PLDA IP register macros to plda-pcie.h
>> >
>> > 2. (patch4 - 6 is processing and re-use PCIe host instance)
>> > patch4 is add bridge_addr field to PCIe host instance.
>> > patch5 is rename data structure in microchip codes.
>> > patch6 is moving two data structures to head file
>> >
>> > 3. (patch 7 - 9 are for re-use two PCIe setup function)
>> > patch7 is rename two setup functions in microchip codes, prepare to move
>> > to common file.
>> > patch8 is change the arguments of plda_pcie_setup_iomems()
>> > patch9 is move the two setup functions to common file pcie-plda-host.c
>> >
>> > 4.(patch 10 - 16 are for re-use interupt processing codes)
>> > patch10 is rename the IRQ related functions, prepare to move to
>> > pcie-plda-host.c
>> > patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
>> > and microchip two platforms.
>> > patch16 is move IRQ related functions to pcie-plda-host.c
>> >
>> > ------------------------------------------------------------
>> > The remainder patches (patch 17 -20) are not refactoring patch.
>> > They are for adding StarFive codes and dont modify the microchip's
>> > codes.
>> >
>> > patch17 is Add PLDA event interrupt codes and host init/deinit functions.
>> > patch18 is add StarFive JH7110 PCIe dt-binding doc.
>> > patch19 is add StarFive JH7110 Soc PCIe codes.
>> > patch20 is Starfive dts config
>> >
>> > This patchset is base on v6.7-rc1
>> >
>> > previous version:
>> > v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
>> > v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
>> > v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
>> > v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
>> > v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
>> >
>> > change:
>> > v11:
>> > check and modify some commit messages again.
>> > All the codes are the same with v10.
>> >
>> > v10:
>> > All the commit message set to fit in 75 columns.
>> > All the codes fit in less than 80 colunms.
>> > patch 14:
>> > Commit message changes suggested by Conor.
>> > patch 19:
>> > Add 100 ms delay macro to pci.h
>> > generic phy pointer related codes moving to pcie-starfive.c
>> > This patch Change pcie-starfive only, bus_ops move to patch 16.
>> > Some Codes changes suggested by Bjorn.
>> >
>> > v9:
>> > v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
>> > patch 4 - 16: Add new review tags and add more accurate commit messages.
>> > patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
>> > plda driver become to whole driver.
>> >
>> > v8:
>> > The patch description in cover-letter has been changed.
>> >
>> > v7 patch 4 split to v8 patch 4 - 6.
>> > (It is patches about re-use pcie host data structure, new patches just contain one
>> > function modification. It is more reguluar and easier to review).
>> >
>> > patch 7- 9: modify the commit messages and add reason of
>> > modifcation.
>> > patch10- 16 :
>> > Add review tag and add more commit messages to declear the
>> > reason of modifying the codes.
>> > patch17: plda_handle_events() using bit mask macro. The function are
>> > easier to read.
>> >
>> > v7:
>> > patch17: fix the build warning.
>> > patch19: Some format changes (Emil's comment)
>> > patch20: change the pcie node sequences by alphabetical
>> > delete the "interupt-parent" in pcie node.
>> >
>> > v6:
>> > v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
>> >
>> > patch 9: Just move the two setup functions only
>> > patch 19 : draw a graph of PLDA local register, make it easier to
>> > review the codes.
>> > v5 patch 7 split to patch 10- 16. Each patch just contain one
>> > function modification. It is more regular.
>> > patch 10: rename IRQ related functions.
>> > patch 11 - 15 : modify the events codes, total five patch.
>> > patch 16: move IRQ related functions to pcie-plda-host.c
>> > patch 19- 20 using "linux,pci-domain" dts setting.
>> >
>> > Minda Chen (20):
>> > dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
>> > PCI: microchip: Move pcie-microchip-host.c to plda directory
>> > PCI: microchip: Move PLDA IP register macros to pcie-plda.h
>> > PCI: microchip: Add bridge_addr field to struct mc_pcie
>> > PCI: microchip: Rename two PCIe data structures
>> > PCI: microchip: Move PCIe host data structures to plda-pcie.h
>> > PCI: microchip: Rename two setup functions
>> > PCI: microchip: Change the argument of plda_pcie_setup_iomems()
>> > PCI: microchip: Move setup functions to pcie-plda-host.c
>> > PCI: microchip: Rename interrupt related functions
>> > PCI: microchip: Add num_events field to struct plda_pcie_rp
>> > PCI: microchip: Add request_event_irq() callback function
>> > PCI: microchip: Add INTx and MSI event num to struct plda_event
>> > PCI: microchip: Add get_events() callback function
>> > PCI: microchip: Add event IRQ domain ops to struct plda_event
>> > PCI: microchip: Move IRQ functions to pcie-plda-host.c
>> > PCI: plda: Add event interrupt codes and host init/deinit functions
>> > dt-bindings: PCI: Add StarFive JH7110 PCIe controller
>> > PCI: starfive: Add JH7110 PCIe controller
>> > riscv: dts: starfive: add PCIe dts configuration for JH7110
>> >
>> > .../bindings/pci/microchip,pcie-host.yaml | 55 +-
>> > .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
>> > .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
>> > MAINTAINERS | 19 +-
>> > .../jh7110-starfive-visionfive-2.dtsi | 64 ++
>> > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
>> > drivers/pci/controller/Kconfig | 9 +-
>> > drivers/pci/controller/Makefile | 2 +-
>> > drivers/pci/controller/plda/Kconfig | 29 +
>> > drivers/pci/controller/plda/Makefile | 4 +
>> > .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
>> > drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
>> > drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
>> > drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
>> > drivers/pci/pci.h | 7 +
>> > 15 files changed, 1851 insertions(+), 604 deletions(-)
>> > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
>> > create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
>> > create mode 100644 drivers/pci/controller/plda/Kconfig
>> > create mode 100644 drivers/pci/controller/plda/Makefile
>> > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
>> > create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
>> > create mode 100644 drivers/pci/controller/plda/pcie-plda.h
>> > create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>> >
>> >
>> > base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
>> > --
>> > 2.17.1
>> >
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-12-01 7:15 ` Minda Chen
@ 2023-12-01 15:32 ` Damian Tometzki
-1 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-12-01 15:32 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Fri, 01. Dec 15:15, Minda Chen wrote:
>
>
> On 2023/11/29 19:32, Damian Tometzki wrote:
> > On Wed, 29. Nov 07:39, Damian Tometzki wrote:
> >> Hello Minda,
> >>
> >> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
> >> /root partition /dev/nvme0n1p4.
> >> I dont know if it has anything to do with this patchset ?
> >> Best regards
> >> Damian
> > Hi,
> > some additional information:
> > Begin: Running /scripts/local-block ... done.
> > Begin: Running /scripts/local-block ... done.
> > [ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
> > [ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
> > [ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
> > [ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
> > [ 11.126371] platform 17020000.pinctrl: deferred probe pending
> > [ 11.132145] platform 16010000.mmc: deferred probe pending
> > Begin: Running /scripts/local-block ... done.
> > Begin: Running /scripts/local-block ... done.
> >
> > Damian
> >
> It is get stg clk failed. Did you enable CONFIG_CLK_STARFIVE_JH7110_STG=y?
Hi,
it is now a little bit better now i get:
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[ 13.916056] platform 940000000.pcie: deferred probe pending
[ 13.921668] platform 9c0000000.pcie: deferred probe pending
[ 13.927259] platform 16010000.mmc: deferred probe pending
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Damian
> >>
> >> On Wed, 15. Nov 19:48, Minda Chen wrote:
> >> > This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> >> > JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> >> > same IP and have commit their codes, which are mixed with PLDA
> >> > controller codes and Microchip platform codes.
> >> >
> >> > For re-use the PLDA controller codes, I request refactoring microchip
> >> > codes, move PLDA common codes to PLDA files.
> >> > Desigware and Cadence is good example for refactoring codes.
> >> >
> >> > ----------------------------------------------------------
> >> > The refactoring patches total number is 16,(patch 1-16)
> >> > which do NOT contain changing logic of codes.
> >> >
> >> > These patches just contain three type basic operations.
> >> > (rename, modify codes to support starfive platform, and moving to common file)
> >> > If these patched are all be reviewed. They can be accepted first.
> >> >
> >> > Refactoring patches can be devided to different groups
> >> > 1. (patch 1- 3 is the prepare work of refactoring)
> >> > patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
> >> > docs from microchip,pcie-host.yaml
> >> > patch2 is move PolarFire codes to PLDA directory.
> >> > patch3 is move PLDA IP register macros to plda-pcie.h
> >> >
> >> > 2. (patch4 - 6 is processing and re-use PCIe host instance)
> >> > patch4 is add bridge_addr field to PCIe host instance.
> >> > patch5 is rename data structure in microchip codes.
> >> > patch6 is moving two data structures to head file
> >> >
> >> > 3. (patch 7 - 9 are for re-use two PCIe setup function)
> >> > patch7 is rename two setup functions in microchip codes, prepare to move
> >> > to common file.
> >> > patch8 is change the arguments of plda_pcie_setup_iomems()
> >> > patch9 is move the two setup functions to common file pcie-plda-host.c
> >> >
> >> > 4.(patch 10 - 16 are for re-use interupt processing codes)
> >> > patch10 is rename the IRQ related functions, prepare to move to
> >> > pcie-plda-host.c
> >> > patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
> >> > and microchip two platforms.
> >> > patch16 is move IRQ related functions to pcie-plda-host.c
> >> >
> >> > ------------------------------------------------------------
> >> > The remainder patches (patch 17 -20) are not refactoring patch.
> >> > They are for adding StarFive codes and dont modify the microchip's
> >> > codes.
> >> >
> >> > patch17 is Add PLDA event interrupt codes and host init/deinit functions.
> >> > patch18 is add StarFive JH7110 PCIe dt-binding doc.
> >> > patch19 is add StarFive JH7110 Soc PCIe codes.
> >> > patch20 is Starfive dts config
> >> >
> >> > This patchset is base on v6.7-rc1
> >> >
> >> > previous version:
> >> > v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
> >> > v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
> >> > v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
> >> > v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
> >> > v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
> >> >
> >> > change:
> >> > v11:
> >> > check and modify some commit messages again.
> >> > All the codes are the same with v10.
> >> >
> >> > v10:
> >> > All the commit message set to fit in 75 columns.
> >> > All the codes fit in less than 80 colunms.
> >> > patch 14:
> >> > Commit message changes suggested by Conor.
> >> > patch 19:
> >> > Add 100 ms delay macro to pci.h
> >> > generic phy pointer related codes moving to pcie-starfive.c
> >> > This patch Change pcie-starfive only, bus_ops move to patch 16.
> >> > Some Codes changes suggested by Bjorn.
> >> >
> >> > v9:
> >> > v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
> >> > patch 4 - 16: Add new review tags and add more accurate commit messages.
> >> > patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
> >> > plda driver become to whole driver.
> >> >
> >> > v8:
> >> > The patch description in cover-letter has been changed.
> >> >
> >> > v7 patch 4 split to v8 patch 4 - 6.
> >> > (It is patches about re-use pcie host data structure, new patches just contain one
> >> > function modification. It is more reguluar and easier to review).
> >> >
> >> > patch 7- 9: modify the commit messages and add reason of
> >> > modifcation.
> >> > patch10- 16 :
> >> > Add review tag and add more commit messages to declear the
> >> > reason of modifying the codes.
> >> > patch17: plda_handle_events() using bit mask macro. The function are
> >> > easier to read.
> >> >
> >> > v7:
> >> > patch17: fix the build warning.
> >> > patch19: Some format changes (Emil's comment)
> >> > patch20: change the pcie node sequences by alphabetical
> >> > delete the "interupt-parent" in pcie node.
> >> >
> >> > v6:
> >> > v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
> >> >
> >> > patch 9: Just move the two setup functions only
> >> > patch 19 : draw a graph of PLDA local register, make it easier to
> >> > review the codes.
> >> > v5 patch 7 split to patch 10- 16. Each patch just contain one
> >> > function modification. It is more regular.
> >> > patch 10: rename IRQ related functions.
> >> > patch 11 - 15 : modify the events codes, total five patch.
> >> > patch 16: move IRQ related functions to pcie-plda-host.c
> >> > patch 19- 20 using "linux,pci-domain" dts setting.
> >> >
> >> > Minda Chen (20):
> >> > dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
> >> > PCI: microchip: Move pcie-microchip-host.c to plda directory
> >> > PCI: microchip: Move PLDA IP register macros to pcie-plda.h
> >> > PCI: microchip: Add bridge_addr field to struct mc_pcie
> >> > PCI: microchip: Rename two PCIe data structures
> >> > PCI: microchip: Move PCIe host data structures to plda-pcie.h
> >> > PCI: microchip: Rename two setup functions
> >> > PCI: microchip: Change the argument of plda_pcie_setup_iomems()
> >> > PCI: microchip: Move setup functions to pcie-plda-host.c
> >> > PCI: microchip: Rename interrupt related functions
> >> > PCI: microchip: Add num_events field to struct plda_pcie_rp
> >> > PCI: microchip: Add request_event_irq() callback function
> >> > PCI: microchip: Add INTx and MSI event num to struct plda_event
> >> > PCI: microchip: Add get_events() callback function
> >> > PCI: microchip: Add event IRQ domain ops to struct plda_event
> >> > PCI: microchip: Move IRQ functions to pcie-plda-host.c
> >> > PCI: plda: Add event interrupt codes and host init/deinit functions
> >> > dt-bindings: PCI: Add StarFive JH7110 PCIe controller
> >> > PCI: starfive: Add JH7110 PCIe controller
> >> > riscv: dts: starfive: add PCIe dts configuration for JH7110
> >> >
> >> > .../bindings/pci/microchip,pcie-host.yaml | 55 +-
> >> > .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
> >> > .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
> >> > MAINTAINERS | 19 +-
> >> > .../jh7110-starfive-visionfive-2.dtsi | 64 ++
> >> > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
> >> > drivers/pci/controller/Kconfig | 9 +-
> >> > drivers/pci/controller/Makefile | 2 +-
> >> > drivers/pci/controller/plda/Kconfig | 29 +
> >> > drivers/pci/controller/plda/Makefile | 4 +
> >> > .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
> >> > drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
> >> > drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
> >> > drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
> >> > drivers/pci/pci.h | 7 +
> >> > 15 files changed, 1851 insertions(+), 604 deletions(-)
> >> > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> >> > create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> >> > create mode 100644 drivers/pci/controller/plda/Kconfig
> >> > create mode 100644 drivers/pci/controller/plda/Makefile
> >> > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
> >> > create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> >> > create mode 100644 drivers/pci/controller/plda/pcie-plda.h
> >> > create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >> >
> >> >
> >> > base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
> >> > --
> >> > 2.17.1
> >> >
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-12-01 15:32 ` Damian Tometzki
0 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-12-01 15:32 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Fri, 01. Dec 15:15, Minda Chen wrote:
>
>
> On 2023/11/29 19:32, Damian Tometzki wrote:
> > On Wed, 29. Nov 07:39, Damian Tometzki wrote:
> >> Hello Minda,
> >>
> >> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
> >> /root partition /dev/nvme0n1p4.
> >> I dont know if it has anything to do with this patchset ?
> >> Best regards
> >> Damian
> > Hi,
> > some additional information:
> > Begin: Running /scripts/local-block ... done.
> > Begin: Running /scripts/local-block ... done.
> > [ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
> > [ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
> > [ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
> > [ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
> > [ 11.126371] platform 17020000.pinctrl: deferred probe pending
> > [ 11.132145] platform 16010000.mmc: deferred probe pending
> > Begin: Running /scripts/local-block ... done.
> > Begin: Running /scripts/local-block ... done.
> >
> > Damian
> >
> It is get stg clk failed. Did you enable CONFIG_CLK_STARFIVE_JH7110_STG=y?
Hi,
it is now a little bit better now i get:
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[ 13.916056] platform 940000000.pcie: deferred probe pending
[ 13.921668] platform 9c0000000.pcie: deferred probe pending
[ 13.927259] platform 16010000.mmc: deferred probe pending
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Damian
> >>
> >> On Wed, 15. Nov 19:48, Minda Chen wrote:
> >> > This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> >> > JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> >> > same IP and have commit their codes, which are mixed with PLDA
> >> > controller codes and Microchip platform codes.
> >> >
> >> > For re-use the PLDA controller codes, I request refactoring microchip
> >> > codes, move PLDA common codes to PLDA files.
> >> > Desigware and Cadence is good example for refactoring codes.
> >> >
> >> > ----------------------------------------------------------
> >> > The refactoring patches total number is 16,(patch 1-16)
> >> > which do NOT contain changing logic of codes.
> >> >
> >> > These patches just contain three type basic operations.
> >> > (rename, modify codes to support starfive platform, and moving to common file)
> >> > If these patched are all be reviewed. They can be accepted first.
> >> >
> >> > Refactoring patches can be devided to different groups
> >> > 1. (patch 1- 3 is the prepare work of refactoring)
> >> > patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
> >> > docs from microchip,pcie-host.yaml
> >> > patch2 is move PolarFire codes to PLDA directory.
> >> > patch3 is move PLDA IP register macros to plda-pcie.h
> >> >
> >> > 2. (patch4 - 6 is processing and re-use PCIe host instance)
> >> > patch4 is add bridge_addr field to PCIe host instance.
> >> > patch5 is rename data structure in microchip codes.
> >> > patch6 is moving two data structures to head file
> >> >
> >> > 3. (patch 7 - 9 are for re-use two PCIe setup function)
> >> > patch7 is rename two setup functions in microchip codes, prepare to move
> >> > to common file.
> >> > patch8 is change the arguments of plda_pcie_setup_iomems()
> >> > patch9 is move the two setup functions to common file pcie-plda-host.c
> >> >
> >> > 4.(patch 10 - 16 are for re-use interupt processing codes)
> >> > patch10 is rename the IRQ related functions, prepare to move to
> >> > pcie-plda-host.c
> >> > patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
> >> > and microchip two platforms.
> >> > patch16 is move IRQ related functions to pcie-plda-host.c
> >> >
> >> > ------------------------------------------------------------
> >> > The remainder patches (patch 17 -20) are not refactoring patch.
> >> > They are for adding StarFive codes and dont modify the microchip's
> >> > codes.
> >> >
> >> > patch17 is Add PLDA event interrupt codes and host init/deinit functions.
> >> > patch18 is add StarFive JH7110 PCIe dt-binding doc.
> >> > patch19 is add StarFive JH7110 Soc PCIe codes.
> >> > patch20 is Starfive dts config
> >> >
> >> > This patchset is base on v6.7-rc1
> >> >
> >> > previous version:
> >> > v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@starfivetech.com/
> >> > v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@starfivetech.com/
> >> > v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@starfivetech.com/
> >> > v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@starfivetech.com/
> >> > v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@starfivetech.com/
> >> >
> >> > change:
> >> > v11:
> >> > check and modify some commit messages again.
> >> > All the codes are the same with v10.
> >> >
> >> > v10:
> >> > All the commit message set to fit in 75 columns.
> >> > All the codes fit in less than 80 colunms.
> >> > patch 14:
> >> > Commit message changes suggested by Conor.
> >> > patch 19:
> >> > Add 100 ms delay macro to pci.h
> >> > generic phy pointer related codes moving to pcie-starfive.c
> >> > This patch Change pcie-starfive only, bus_ops move to patch 16.
> >> > Some Codes changes suggested by Bjorn.
> >> >
> >> > v9:
> >> > v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
> >> > patch 4 - 16: Add new review tags and add more accurate commit messages.
> >> > patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
> >> > plda driver become to whole driver.
> >> >
> >> > v8:
> >> > The patch description in cover-letter has been changed.
> >> >
> >> > v7 patch 4 split to v8 patch 4 - 6.
> >> > (It is patches about re-use pcie host data structure, new patches just contain one
> >> > function modification. It is more reguluar and easier to review).
> >> >
> >> > patch 7- 9: modify the commit messages and add reason of
> >> > modifcation.
> >> > patch10- 16 :
> >> > Add review tag and add more commit messages to declear the
> >> > reason of modifying the codes.
> >> > patch17: plda_handle_events() using bit mask macro. The function are
> >> > easier to read.
> >> >
> >> > v7:
> >> > patch17: fix the build warning.
> >> > patch19: Some format changes (Emil's comment)
> >> > patch20: change the pcie node sequences by alphabetical
> >> > delete the "interupt-parent" in pcie node.
> >> >
> >> > v6:
> >> > v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
> >> >
> >> > patch 9: Just move the two setup functions only
> >> > patch 19 : draw a graph of PLDA local register, make it easier to
> >> > review the codes.
> >> > v5 patch 7 split to patch 10- 16. Each patch just contain one
> >> > function modification. It is more regular.
> >> > patch 10: rename IRQ related functions.
> >> > patch 11 - 15 : modify the events codes, total five patch.
> >> > patch 16: move IRQ related functions to pcie-plda-host.c
> >> > patch 19- 20 using "linux,pci-domain" dts setting.
> >> >
> >> > Minda Chen (20):
> >> > dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
> >> > PCI: microchip: Move pcie-microchip-host.c to plda directory
> >> > PCI: microchip: Move PLDA IP register macros to pcie-plda.h
> >> > PCI: microchip: Add bridge_addr field to struct mc_pcie
> >> > PCI: microchip: Rename two PCIe data structures
> >> > PCI: microchip: Move PCIe host data structures to plda-pcie.h
> >> > PCI: microchip: Rename two setup functions
> >> > PCI: microchip: Change the argument of plda_pcie_setup_iomems()
> >> > PCI: microchip: Move setup functions to pcie-plda-host.c
> >> > PCI: microchip: Rename interrupt related functions
> >> > PCI: microchip: Add num_events field to struct plda_pcie_rp
> >> > PCI: microchip: Add request_event_irq() callback function
> >> > PCI: microchip: Add INTx and MSI event num to struct plda_event
> >> > PCI: microchip: Add get_events() callback function
> >> > PCI: microchip: Add event IRQ domain ops to struct plda_event
> >> > PCI: microchip: Move IRQ functions to pcie-plda-host.c
> >> > PCI: plda: Add event interrupt codes and host init/deinit functions
> >> > dt-bindings: PCI: Add StarFive JH7110 PCIe controller
> >> > PCI: starfive: Add JH7110 PCIe controller
> >> > riscv: dts: starfive: add PCIe dts configuration for JH7110
> >> >
> >> > .../bindings/pci/microchip,pcie-host.yaml | 55 +-
> >> > .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
> >> > .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
> >> > MAINTAINERS | 19 +-
> >> > .../jh7110-starfive-visionfive-2.dtsi | 64 ++
> >> > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
> >> > drivers/pci/controller/Kconfig | 9 +-
> >> > drivers/pci/controller/Makefile | 2 +-
> >> > drivers/pci/controller/plda/Kconfig | 29 +
> >> > drivers/pci/controller/plda/Makefile | 4 +
> >> > .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
> >> > drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
> >> > drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
> >> > drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
> >> > drivers/pci/pci.h | 7 +
> >> > 15 files changed, 1851 insertions(+), 604 deletions(-)
> >> > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> >> > create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> >> > create mode 100644 drivers/pci/controller/plda/Kconfig
> >> > create mode 100644 drivers/pci/controller/plda/Makefile
> >> > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
> >> > create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> >> > create mode 100644 drivers/pci/controller/plda/pcie-plda.h
> >> > create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >> >
> >> >
> >> > base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
> >> > --
> >> > 2.17.1
> >> >
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-12-01 15:32 ` Damian Tometzki
@ 2023-12-02 13:17 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-02 13:17 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/12/1 23:32, Damian Tometzki wrote:
> On Fri, 01. Dec 15:15, Minda Chen wrote:
>>
>>
>> On 2023/11/29 19:32, Damian Tometzki wrote:
>> > On Wed, 29. Nov 07:39, Damian Tometzki wrote:
>> >> Hello Minda,
>> >>
>> >> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
>> >> /root partition /dev/nvme0n1p4.
>> >> I dont know if it has anything to do with this patchset ?
>> >> Best regards
>> >> Damian
>> > Hi,
>> > some additional information:
>> > Begin: Running /scripts/local-block ... done.
>> > Begin: Running /scripts/local-block ... done.
>> > [ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
>> > [ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
>> > [ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
>> > [ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
>> > [ 11.126371] platform 17020000.pinctrl: deferred probe pending
>> > [ 11.132145] platform 16010000.mmc: deferred probe pending
>> > Begin: Running /scripts/local-block ... done.
>> > Begin: Running /scripts/local-block ... done.
>> >
>> > Damian
>> >
>> It is get stg clk failed. Did you enable CONFIG_CLK_STARFIVE_JH7110_STG=y?
> Hi,
>
> it is now a little bit better now i get:
> Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
> Begin: Running /scripts/local-premount ... done.
> Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> [ 13.916056] platform 940000000.pcie: deferred probe pending
> [ 13.921668] platform 9c0000000.pcie: deferred probe pending
> [ 13.927259] platform 16010000.mmc: deferred probe pending
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
>
>
Hi
Please check this configuation.
CONFIG_PHY_STARFIVE_JH7110_PCIE=y
CONFIG_PINCTRL_STARFIVE_JH7110=y
CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
BTW, Maybe you can reply e-mail to me only.
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-12-02 13:17 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-02 13:17 UTC (permalink / raw)
To: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/12/1 23:32, Damian Tometzki wrote:
> On Fri, 01. Dec 15:15, Minda Chen wrote:
>>
>>
>> On 2023/11/29 19:32, Damian Tometzki wrote:
>> > On Wed, 29. Nov 07:39, Damian Tometzki wrote:
>> >> Hello Minda,
>> >>
>> >> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
>> >> /root partition /dev/nvme0n1p4.
>> >> I dont know if it has anything to do with this patchset ?
>> >> Best regards
>> >> Damian
>> > Hi,
>> > some additional information:
>> > Begin: Running /scripts/local-block ... done.
>> > Begin: Running /scripts/local-block ... done.
>> > [ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
>> > [ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
>> > [ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
>> > [ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
>> > [ 11.126371] platform 17020000.pinctrl: deferred probe pending
>> > [ 11.132145] platform 16010000.mmc: deferred probe pending
>> > Begin: Running /scripts/local-block ... done.
>> > Begin: Running /scripts/local-block ... done.
>> >
>> > Damian
>> >
>> It is get stg clk failed. Did you enable CONFIG_CLK_STARFIVE_JH7110_STG=y?
> Hi,
>
> it is now a little bit better now i get:
> Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
> Begin: Running /scripts/local-premount ... done.
> Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> [ 13.916056] platform 940000000.pcie: deferred probe pending
> [ 13.921668] platform 9c0000000.pcie: deferred probe pending
> [ 13.927259] platform 16010000.mmc: deferred probe pending
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
>
>
Hi
Please check this configuation.
CONFIG_PHY_STARFIVE_JH7110_PCIE=y
CONFIG_PINCTRL_STARFIVE_JH7110=y
CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
BTW, Maybe you can reply e-mail to me only.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-11-15 11:49 ` Minda Chen
@ 2023-12-02 14:44 ` Emil Renner Berthing
-1 siblings, 0 replies; 74+ messages in thread
From: Emil Renner Berthing @ 2023-12-02 14:44 UTC (permalink / raw)
To: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
> with PLDA host PCIe core.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> ---
> MAINTAINERS | 7 +
> drivers/pci/controller/plda/Kconfig | 11 +
> drivers/pci/controller/plda/Makefile | 1 +
> drivers/pci/controller/plda/pcie-plda.h | 71 ++-
> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
> drivers/pci/pci.h | 7 +
> 6 files changed, 556 insertions(+), 1 deletion(-)
> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>
...
> +
> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
> + struct device *dev)
> +{
> + int domain_nr;
> +
> + pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> + if (pcie->num_clks < 0)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get pcie clocks\n");
Hi Minda,
From Damian's mail I noticed that this should propagate the error from
devm_clk_bulk_get_all() properly, so -EPROBE is converted to an -ENODEV error.
Eg.
if (pcie->num_clks < 0)
return dev_err_probe(dev, pcie->num_clks,
"failed to get pcie clocks\n");
> +
> + pcie->resets = devm_reset_control_array_get_exclusive(dev);
> + if (IS_ERR(pcie->resets))
> + return dev_err_probe(dev, PTR_ERR(pcie->resets),
> + "failed to get pcie resets");
> +
> + pcie->reg_syscon =
> + syscon_regmap_lookup_by_phandle(dev->of_node,
> + "starfive,stg-syscon");
> +
> + if (IS_ERR(pcie->reg_syscon))
> + return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> + "failed to parse starfive,stg-syscon\n");
> +
> + pcie->phy = devm_phy_optional_get(dev, NULL);
> + if (IS_ERR(pcie->phy))
> + return dev_err_probe(dev, PTR_ERR(pcie->phy),
> + "failed to get pcie phy\n");
> +
> + domain_nr = of_get_pci_domain_nr(dev->of_node);
> +
> + if (domain_nr < 0 || domain_nr > 1)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get valid pcie domain\n");
> +
> + if (domain_nr == 0)
> + pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> + else
> + pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> +
> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(pcie->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
> + "failed to get perst-gpio\n");
> +
> + pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(pcie->power_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
> + "failed to get power-gpio\n");
> +
> + return 0;
> +}
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-12-02 14:44 ` Emil Renner Berthing
0 siblings, 0 replies; 74+ messages in thread
From: Emil Renner Berthing @ 2023-12-02 14:44 UTC (permalink / raw)
To: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
> with PLDA host PCIe core.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
> ---
> MAINTAINERS | 7 +
> drivers/pci/controller/plda/Kconfig | 11 +
> drivers/pci/controller/plda/Makefile | 1 +
> drivers/pci/controller/plda/pcie-plda.h | 71 ++-
> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
> drivers/pci/pci.h | 7 +
> 6 files changed, 556 insertions(+), 1 deletion(-)
> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>
...
> +
> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
> + struct device *dev)
> +{
> + int domain_nr;
> +
> + pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
> + if (pcie->num_clks < 0)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get pcie clocks\n");
Hi Minda,
From Damian's mail I noticed that this should propagate the error from
devm_clk_bulk_get_all() properly, so -EPROBE is converted to an -ENODEV error.
Eg.
if (pcie->num_clks < 0)
return dev_err_probe(dev, pcie->num_clks,
"failed to get pcie clocks\n");
> +
> + pcie->resets = devm_reset_control_array_get_exclusive(dev);
> + if (IS_ERR(pcie->resets))
> + return dev_err_probe(dev, PTR_ERR(pcie->resets),
> + "failed to get pcie resets");
> +
> + pcie->reg_syscon =
> + syscon_regmap_lookup_by_phandle(dev->of_node,
> + "starfive,stg-syscon");
> +
> + if (IS_ERR(pcie->reg_syscon))
> + return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
> + "failed to parse starfive,stg-syscon\n");
> +
> + pcie->phy = devm_phy_optional_get(dev, NULL);
> + if (IS_ERR(pcie->phy))
> + return dev_err_probe(dev, PTR_ERR(pcie->phy),
> + "failed to get pcie phy\n");
> +
> + domain_nr = of_get_pci_domain_nr(dev->of_node);
> +
> + if (domain_nr < 0 || domain_nr > 1)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get valid pcie domain\n");
> +
> + if (domain_nr == 0)
> + pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
> + else
> + pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
> +
> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(pcie->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
> + "failed to get perst-gpio\n");
> +
> + pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(pcie->power_gpio))
> + return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
> + "failed to get power-gpio\n");
> +
> + return 0;
> +}
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
2023-12-02 14:44 ` Emil Renner Berthing
@ 2023-12-04 6:03 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-04 6:03 UTC (permalink / raw)
To: Emil Renner Berthing, Conor Dooley, Krzysztof Wilczyński,
Rob Herring, Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/12/2 22:44, Emil Renner Berthing wrote:
> Minda Chen wrote:
>> Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
>> with PLDA host PCIe core.
>>
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
>> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
>> ---
>> MAINTAINERS | 7 +
>> drivers/pci/controller/plda/Kconfig | 11 +
>> drivers/pci/controller/plda/Makefile | 1 +
>> drivers/pci/controller/plda/pcie-plda.h | 71 ++-
>> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
>> drivers/pci/pci.h | 7 +
>> 6 files changed, 556 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>>
>
> ...
>
>> +
>> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
>> + struct device *dev)
>> +{
>> + int domain_nr;
>> +
>> + pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
>> + if (pcie->num_clks < 0)
>> + return dev_err_probe(dev, -ENODEV,
>> + "failed to get pcie clocks\n");
>
> Hi Minda,
>
> From Damian's mail I noticed that this should propagate the error from
> devm_clk_bulk_get_all() properly, so -EPROBE is converted to an -ENODEV error.
> Eg.
>
> if (pcie->num_clks < 0)
> return dev_err_probe(dev, pcie->num_clks,
> "failed to get pcie clocks\n");
>
Thanks. I will change it in next version.
>> +
>> + pcie->resets = devm_reset_control_array_get_exclusive(dev);
>> + if (IS_ERR(pcie->resets))
>> + return dev_err_probe(dev, PTR_ERR(pcie->resets),
>> + "failed to get pcie resets");
>> +
>> + pcie->reg_syscon =
>> + syscon_regmap_lookup_by_phandle(dev->of_node,
>> + "starfive,stg-syscon");
>> +
>> + if (IS_ERR(pcie->reg_syscon))
>> + return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
>> + "failed to parse starfive,stg-syscon\n");
>> +
>> + pcie->phy = devm_phy_optional_get(dev, NULL);
>> + if (IS_ERR(pcie->phy))
>> + return dev_err_probe(dev, PTR_ERR(pcie->phy),
>> + "failed to get pcie phy\n");
>> +
>> + domain_nr = of_get_pci_domain_nr(dev->of_node);
>> +
>> + if (domain_nr < 0 || domain_nr > 1)
>> + return dev_err_probe(dev, -ENODEV,
>> + "failed to get valid pcie domain\n");
>> +
>> + if (domain_nr == 0)
>> + pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
>> + else
>> + pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
>> +
>> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
>> + GPIOD_OUT_HIGH);
>> + if (IS_ERR(pcie->reset_gpio))
>> + return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
>> + "failed to get perst-gpio\n");
>> +
>> + pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
>> + GPIOD_OUT_LOW);
>> + if (IS_ERR(pcie->power_gpio))
>> + return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
>> + "failed to get power-gpio\n");
>> +
>> + return 0;
>> +}
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller
@ 2023-12-04 6:03 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-04 6:03 UTC (permalink / raw)
To: Emil Renner Berthing, Conor Dooley, Krzysztof Wilczyński,
Rob Herring, Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Krzysztof Kozlowski
Cc: devicetree, linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/12/2 22:44, Emil Renner Berthing wrote:
> Minda Chen wrote:
>> Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
>> with PLDA host PCIe core.
>>
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> Co-developed-by: Kevin Xie <kevin.xie@starfivetech.com>
>> Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
>> ---
>> MAINTAINERS | 7 +
>> drivers/pci/controller/plda/Kconfig | 11 +
>> drivers/pci/controller/plda/Makefile | 1 +
>> drivers/pci/controller/plda/pcie-plda.h | 71 ++-
>> drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
>> drivers/pci/pci.h | 7 +
>> 6 files changed, 556 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>>
>
> ...
>
>> +
>> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
>> + struct device *dev)
>> +{
>> + int domain_nr;
>> +
>> + pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
>> + if (pcie->num_clks < 0)
>> + return dev_err_probe(dev, -ENODEV,
>> + "failed to get pcie clocks\n");
>
> Hi Minda,
>
> From Damian's mail I noticed that this should propagate the error from
> devm_clk_bulk_get_all() properly, so -EPROBE is converted to an -ENODEV error.
> Eg.
>
> if (pcie->num_clks < 0)
> return dev_err_probe(dev, pcie->num_clks,
> "failed to get pcie clocks\n");
>
Thanks. I will change it in next version.
>> +
>> + pcie->resets = devm_reset_control_array_get_exclusive(dev);
>> + if (IS_ERR(pcie->resets))
>> + return dev_err_probe(dev, PTR_ERR(pcie->resets),
>> + "failed to get pcie resets");
>> +
>> + pcie->reg_syscon =
>> + syscon_regmap_lookup_by_phandle(dev->of_node,
>> + "starfive,stg-syscon");
>> +
>> + if (IS_ERR(pcie->reg_syscon))
>> + return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
>> + "failed to parse starfive,stg-syscon\n");
>> +
>> + pcie->phy = devm_phy_optional_get(dev, NULL);
>> + if (IS_ERR(pcie->phy))
>> + return dev_err_probe(dev, PTR_ERR(pcie->phy),
>> + "failed to get pcie phy\n");
>> +
>> + domain_nr = of_get_pci_domain_nr(dev->of_node);
>> +
>> + if (domain_nr < 0 || domain_nr > 1)
>> + return dev_err_probe(dev, -ENODEV,
>> + "failed to get valid pcie domain\n");
>> +
>> + if (domain_nr == 0)
>> + pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
>> + else
>> + pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
>> +
>> + pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
>> + GPIOD_OUT_HIGH);
>> + if (IS_ERR(pcie->reset_gpio))
>> + return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
>> + "failed to get perst-gpio\n");
>> +
>> + pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
>> + GPIOD_OUT_LOW);
>> + if (IS_ERR(pcie->power_gpio))
>> + return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
>> + "failed to get power-gpio\n");
>> +
>> + return 0;
>> +}
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-12-02 13:17 ` Minda Chen
@ 2023-12-04 21:28 ` Bjorn Helgaas
-1 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-12-04 21:28 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
> ...
> Please check this configuation.
> CONFIG_PHY_STARFIVE_JH7110_PCIE=y
> CONFIG_PINCTRL_STARFIVE_JH7110=y
> CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
> CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
>
> BTW, Maybe you can reply e-mail to me only.
There's usually no benefit to replying off-list. The list archives
are very valuable for future maintenance because they help us
understand the reason things were done a certain way.
Bjorn
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-12-04 21:28 ` Bjorn Helgaas
0 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-12-04 21:28 UTC (permalink / raw)
To: Minda Chen
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
> ...
> Please check this configuation.
> CONFIG_PHY_STARFIVE_JH7110_PCIE=y
> CONFIG_PINCTRL_STARFIVE_JH7110=y
> CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
> CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
>
> BTW, Maybe you can reply e-mail to me only.
There's usually no benefit to replying off-list. The list archives
are very valuable for future maintenance because they help us
understand the reason things were done a certain way.
Bjorn
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-12-04 21:28 ` Bjorn Helgaas
@ 2023-12-05 1:21 ` Minda Chen
-1 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-05 1:21 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/12/5 5:28, Bjorn Helgaas wrote:
> On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
>> ...
>> Please check this configuation.
>> CONFIG_PHY_STARFIVE_JH7110_PCIE=y
>> CONFIG_PINCTRL_STARFIVE_JH7110=y
>> CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
>> CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
>>
>> BTW, Maybe you can reply e-mail to me only.
>
> There's usually no benefit to replying off-list. The list archives
> are very valuable for future maintenance because they help us
> understand the reason things were done a certain way.
>
> Bjorn
I am sorry about this. I thought this have nothing to do with codes review and disturb the maintainer.
Now Damian can work with PCIe in VisionFive v2 board.
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-12-05 1:21 ` Minda Chen
0 siblings, 0 replies; 74+ messages in thread
From: Minda Chen @ 2023-12-05 1:21 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On 2023/12/5 5:28, Bjorn Helgaas wrote:
> On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
>> ...
>> Please check this configuation.
>> CONFIG_PHY_STARFIVE_JH7110_PCIE=y
>> CONFIG_PINCTRL_STARFIVE_JH7110=y
>> CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
>> CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
>>
>> BTW, Maybe you can reply e-mail to me only.
>
> There's usually no benefit to replying off-list. The list archives
> are very valuable for future maintenance because they help us
> understand the reason things were done a certain way.
>
> Bjorn
I am sorry about this. I thought this have nothing to do with codes review and disturb the maintainer.
Now Damian can work with PCIe in VisionFive v2 board.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-12-04 21:28 ` Bjorn Helgaas
@ 2023-12-05 9:18 ` Damian Tometzki
-1 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-12-05 9:18 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Mon, 04. Dec 15:28, Bjorn Helgaas wrote:
> On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
> > ...
> > Please check this configuation.
> > CONFIG_PHY_STARFIVE_JH7110_PCIE=y
> > CONFIG_PINCTRL_STARFIVE_JH7110=y
> > CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
> > CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
> >
> > BTW, Maybe you can reply e-mail to me only.
>
> There's usually no benefit to replying off-list. The list archives
> are very valuable for future maintenance because they help us
> understand the reason things were done a certain way.
>
> Bjorn
Hello together,
the main problemwas was to find the rquired CONFIG_* options for StarFive
Board. It would be great to have an CONFIG_ Options with all required
Dependencies.
Best regards
damian
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-12-05 9:18 ` Damian Tometzki
0 siblings, 0 replies; 74+ messages in thread
From: Damian Tometzki @ 2023-12-05 9:18 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Mon, 04. Dec 15:28, Bjorn Helgaas wrote:
> On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
> > ...
> > Please check this configuation.
> > CONFIG_PHY_STARFIVE_JH7110_PCIE=y
> > CONFIG_PINCTRL_STARFIVE_JH7110=y
> > CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
> > CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
> >
> > BTW, Maybe you can reply e-mail to me only.
>
> There's usually no benefit to replying off-list. The list archives
> are very valuable for future maintenance because they help us
> understand the reason things were done a certain way.
>
> Bjorn
Hello together,
the main problemwas was to find the rquired CONFIG_* options for StarFive
Board. It would be great to have an CONFIG_ Options with all required
Dependencies.
Best regards
damian
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
2023-12-05 9:18 ` Damian Tometzki
@ 2023-12-05 17:02 ` Bjorn Helgaas
-1 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-12-05 17:02 UTC (permalink / raw)
To: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Tue, Dec 05, 2023 at 10:18:12AM +0100, Damian Tometzki wrote:
> > On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
> > > ...
> > > Please check this configuation.
> > > CONFIG_PHY_STARFIVE_JH7110_PCIE=y
> > > CONFIG_PINCTRL_STARFIVE_JH7110=y
> > > CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
> > > CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
> ...
> Hello together,
> the main problemwas was to find the rquired CONFIG_* options for StarFive
> Board. It would be great to have an CONFIG_ Options with all required
> Dependencies.
I didn't follow all the discussion here so I don't know all the
symptoms and what the resulting working config was, but it sounds like
the Kconfig needs to be simplified somehow so other users don't have
to repeat this struggle.
Bjorn
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
@ 2023-12-05 17:02 ` Bjorn Helgaas
0 siblings, 0 replies; 74+ messages in thread
From: Bjorn Helgaas @ 2023-12-05 17:02 UTC (permalink / raw)
To: Minda Chen, Conor Dooley, Krzysztof Wilczyński, Rob Herring,
Bjorn Helgaas, Lorenzo Pieralisi, Daire McNamara,
Emil Renner Berthing, Krzysztof Kozlowski, devicetree,
linux-kernel, linux-riscv, linux-pci, Paul Walmsley,
Palmer Dabbelt, Albert Ou, Philipp Zabel, Mason Huo, Leyfoon Tan,
Kevin Xie
On Tue, Dec 05, 2023 at 10:18:12AM +0100, Damian Tometzki wrote:
> > On Sat, Dec 02, 2023 at 09:17:24PM +0800, Minda Chen wrote:
> > > ...
> > > Please check this configuation.
> > > CONFIG_PHY_STARFIVE_JH7110_PCIE=y
> > > CONFIG_PINCTRL_STARFIVE_JH7110=y
> > > CONFIG_PINCTRL_STARFIVE_JH7110_SYS=y
> > > CONFIG_PINCTRL_STARFIVE_JH7110_AON=y
> ...
> Hello together,
> the main problemwas was to find the rquired CONFIG_* options for StarFive
> Board. It would be great to have an CONFIG_ Options with all required
> Dependencies.
I didn't follow all the discussion here so I don't know all the
symptoms and what the resulting working config was, but it sounds like
the Kconfig needs to be simplified somehow so other users don't have
to repeat this struggle.
Bjorn
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
^ permalink raw reply [flat|nested] 74+ messages in thread
end of thread, other threads:[~2023-12-05 17:02 UTC | newest]
Thread overview: 74+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-11-15 11:48 [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:48 ` [PATCH v11 01/20] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:48 ` [PATCH v11 02/20] PCI: microchip: Move pcie-microchip-host.c to plda directory Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:48 ` [PATCH v11 03/20] PCI: microchip: Move PLDA IP register macros to pcie-plda.h Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:48 ` [PATCH v11 04/20] PCI: microchip: Add bridge_addr field to struct mc_pcie Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:48 ` [PATCH v11 05/20] PCI: microchip: Rename two PCIe data structures Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:48 ` [PATCH v11 06/20] PCI: microchip: Move PCIe host data structures to plda-pcie.h Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:48 ` [PATCH v11 07/20] PCI: microchip: Rename two setup functions Minda Chen
2023-11-15 11:48 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 08/20] PCI: microchip: Change the argument of plda_pcie_setup_iomems() Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 09/20] PCI: microchip: Move setup functions to pcie-plda-host.c Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 10/20] PCI: microchip: Rename interrupt related functions Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 11/20] PCI: microchip: Add num_events field to struct plda_pcie_rp Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 12/20] PCI: microchip: Add request_event_irq() callback function Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 13/20] PCI: microchip: Add INTx and MSI event num to struct plda_event Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 14/20] PCI: microchip: Add get_events() callback function Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 15/20] PCI: microchip: Add event IRQ domain ops to struct plda_event Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 16/20] PCI: microchip: Move IRQ functions to pcie-plda-host.c Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 17/20] PCI: plda: Add event interrupt codes and host init/deinit functions Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 18/20] dt-bindings: PCI: Add StarFive JH7110 PCIe controller Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 19/20] PCI: starfive: Add " Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-20 10:07 ` Minda Chen
2023-11-20 10:07 ` Minda Chen
2023-11-20 18:23 ` Bjorn Helgaas
2023-11-20 18:23 ` Bjorn Helgaas
2023-11-21 0:52 ` Minda Chen
2023-11-21 0:52 ` Minda Chen
2023-11-21 21:32 ` Bjorn Helgaas
2023-11-21 21:32 ` Bjorn Helgaas
2023-11-23 11:42 ` Minda Chen
2023-11-23 11:42 ` Minda Chen
2023-12-02 14:44 ` Emil Renner Berthing
2023-12-02 14:44 ` Emil Renner Berthing
2023-12-04 6:03 ` Minda Chen
2023-12-04 6:03 ` Minda Chen
2023-11-15 11:49 ` [PATCH v11 20/20] riscv: dts: starfive: add PCIe dts configuration for JH7110 Minda Chen
2023-11-15 11:49 ` Minda Chen
2023-11-29 6:39 ` [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe Damian Tometzki
2023-11-29 6:39 ` Damian Tometzki
2023-11-29 11:32 ` Damian Tometzki
2023-11-29 11:32 ` Damian Tometzki
2023-12-01 7:15 ` Minda Chen
2023-12-01 7:15 ` Minda Chen
2023-12-01 15:32 ` Damian Tometzki
2023-12-01 15:32 ` Damian Tometzki
2023-12-02 13:17 ` Minda Chen
2023-12-02 13:17 ` Minda Chen
2023-12-04 21:28 ` Bjorn Helgaas
2023-12-04 21:28 ` Bjorn Helgaas
2023-12-05 1:21 ` Minda Chen
2023-12-05 1:21 ` Minda Chen
2023-12-05 9:18 ` Damian Tometzki
2023-12-05 9:18 ` Damian Tometzki
2023-12-05 17:02 ` Bjorn Helgaas
2023-12-05 17:02 ` Bjorn Helgaas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.