* [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends
@ 2011-08-31 18:30 Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 01/14] build: Fix linkage of QEMU_PROG Lluís
` (14 more replies)
0 siblings, 15 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:30 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
This patch defines the "disable" trace event state to always use the "nop"
backend.
As a side-effect, all events are now enabled (without "disable") by default, as
all backends (except "stderr") have programmatic support for dynamically
(de)activating each trace event.
In order to make this true, the "simple" backend now has a "-trace
events=<file>" argument to let the user select which events must be enabled from
the very beginning.
NOTES:
* Parsing of -trace arguments is not done in the OS-specific frontends.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Changes in v9:
* Initialize "trace_file" and "trace_events" in "vl.c".
* Remove "disable" property in events from "hw/g364fb.c"
Changes in v8:
* Fix some typos.
* Fix linkage of QEMU_PROG target.
* Provide default implementations of optional backend-specific routines in
"trace/default.c".
* Use a single routine for backend initialization ("trace_backend_init").
* A couple of minor documentation additions.
* Rebase on qemu.git/master (f0fb8b7180fdcf536ea635a0720e1496110ecb3b).
Changes in v7:
* Fix cmdline documentation for the stderr backend.
* Implement non-generic "trace/control.h" routines on each backend.
Changes in v6:
* Fix linkage when using the simple tracing backend.
* Rename variables in configure (CONFIG_*_TRACE -> CONFIG_TRACE_*).
* Prettify Makefile.obj using "trace-obj-$(CONFIG_TRACE*)"
* Use 'trace-nested-y' pattern in Makefile.obj.
* Add QEMU_WEAK to support "default implementations".
* Provide generic trace cmdline configuration routines that backends can
override through QEMU_WEAK.
* Do the same for event state printing and setting.
* Rebase on qemu.git/master (56a7a874e962e28522857fbf72eaefb1a07e2001).
Changes in v5:
* Fix a variable name typo in configure.
* Rebase on qemu.git/master (c24a9c6ef946ec1b5b280061d4f7b579aaac6707).
Changes in v4:
* Fix a couple of minor errors.
Changes in v3:
* Rebase on qemu.git/master (642cfd4d31241c0fc65c520cb1e703659af66236).
* Remove already-merged patches.
* Remove code styling patches.
* Generalize programmatic interface for trace event state control.
Changes in v2:
* Documentation fixes.
* Seggregate whitespace/indentation changes.
* Minor code beautifications.
* Make all -trace suboptions explicit.
* Fix minor comments from Stefan.
* Minor trace-events format fixes.
* Integrate changes from Fabien.
* Rebase on qemu.git/master (c8f930c0eeb696d638f4d4bf654e955fa44ff40f).
Lluís Vilanova (14):
build: Fix linkage of QEMU_PROG
build: [simple] Include qemu-timer-common.o in trace-obj-y
trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_*
trace: [make] replace 'ifeq' with values in CONFIG_TRACE_*
trace: move backend-specific code into the trace/ directory
trace: avoid conditional code compilation during option parsing
trace: generalize the "property" concept in the trace-events file
trace-state: separate trace event control and query routines from the simple backend
trace-state: always compile support for controlling and querying trace event states
trace-state: add "-trace events" argument to control initial state
trace-state: always use the "nop" backend on events with the "disable" keyword
trace-state: [simple] disable all trace points by default
trace-state: [stderr] add support for dynamically enabling/disabling events
trace: enable all events
Makefile | 1
Makefile.objs | 22 +-
Makefile.target | 8 -
configure | 27 ++
docs/tracing.txt | 73 ++++--
hmp-commands.hx | 11 +
monitor.c | 26 +-
qemu-config.c | 7 -
qemu-options.hx | 27 ++
scripts/tracetool | 116 +++++----
simpletrace.c | 355 -----------------------------
simpletrace.h | 48 ----
tests/test_path.c | 2
trace-events | 651 ++++++++++++++++++++++++++---------------------------
trace/control.c | 42 +++
trace/control.h | 41 +++
trace/default.c | 41 +++
trace/simple.c | 358 +++++++++++++++++++++++++++++
trace/simple.h | 38 +++
trace/stderr.c | 37 +++
trace/stderr.h | 11 +
vl.c | 19 +-
22 files changed, 1095 insertions(+), 866 deletions(-)
delete mode 100644 simpletrace.c
delete mode 100644 simpletrace.h
create mode 100644 trace/control.c
create mode 100644 trace/control.h
create mode 100644 trace/default.c
create mode 100644 trace/simple.c
create mode 100644 trace/simple.h
create mode 100644 trace/stderr.c
create mode 100644 trace/stderr.h
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 01/14] build: Fix linkage of QEMU_PROG
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
@ 2011-08-31 18:30 ` Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 02/14] build: [simple] Include qemu-timer-common.o in trace-obj-y Lluís
` (13 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:30 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Using '$^' to establish the files to link with will remove any repeated entries
in the list of dependencies.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile.target | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Makefile.target b/Makefile.target
index 07af4d4..62ddfc9 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -398,7 +398,7 @@ obj-y += $(addprefix ../, $(trace-obj-y))
obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)
- $(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))
+ $(call LINK,$^)
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 02/14] build: [simple] Include qemu-timer-common.o in trace-obj-y
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 01/14] build: Fix linkage of QEMU_PROG Lluís
@ 2011-08-31 18:30 ` Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 03/14] trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_* Lluís
` (12 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:30 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Helper programs like qemu-ga use tracing primitives, but qemu-timer-common.o
(also used by simpletrace.o) is not necessarily included in the linkage line.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile.objs | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/Makefile.objs b/Makefile.objs
index d1f3e5d..44d7238 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -380,7 +380,7 @@ else
trace-obj-y = trace.o
ifeq ($(TRACE_BACKEND),simple)
trace-obj-y += simpletrace.o
-user-obj-y += qemu-timer-common.o
+trace-obj-y += qemu-timer-common.o
endif
endif
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 03/14] trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_*
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 01/14] build: Fix linkage of QEMU_PROG Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 02/14] build: [simple] Include qemu-timer-common.o in trace-obj-y Lluís
@ 2011-08-31 18:30 ` Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 04/14] trace: [make] replace 'ifeq' with values in CONFIG_TRACE_* Lluís
` (11 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:30 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Provides a more hierarchical view of the variable domain.
Also adds the CONFIG_TRACE_* variables for all backends.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile.target | 6 +++---
configure | 20 +++++++++++++++-----
hmp-commands.hx | 4 ++--
monitor.c | 8 ++++----
qemu-config.c | 4 ++--
qemu-options.hx | 2 +-
simpletrace.h | 4 ++--
tests/test_path.c | 2 +-
vl.c | 2 +-
9 files changed, 31 insertions(+), 21 deletions(-)
diff --git a/Makefile.target b/Makefile.target
index 62ddfc9..25c16d7 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -44,7 +44,7 @@ endif
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
-ifdef CONFIG_SYSTEMTAP_TRACE
+ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp
ifdef CONFIG_USER_ONLY
@@ -414,7 +414,7 @@ clean:
rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
rm -f *.d */*.d tcg/*.o ide/*.o 9pfs/*.o
rm -f hmp-commands.h qmp-commands.h gdbstub-xml.c
-ifdef CONFIG_SYSTEMTAP_TRACE
+ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
@@ -425,7 +425,7 @@ ifneq ($(STRIP),)
$(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
endif
endif
-ifdef CONFIG_SYSTEMTAP_TRACE
+ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(datadir)/../systemtap/tapset"
endif
diff --git a/configure b/configure
index 1340c33..163c5aa 100755
--- a/configure
+++ b/configure
@@ -3065,15 +3065,25 @@ bsd)
esac
echo "TRACE_BACKEND=$trace_backend" >> $config_host_mak
-if test "$trace_backend" = "simple"; then
- echo "CONFIG_SIMPLE_TRACE=y" >> $config_host_mak
+if test "$trace_backend" = "nop"; then
+ echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
fi
-# Set the appropriate trace file.
if test "$trace_backend" = "simple"; then
+ echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
+ # Set the appropriate trace file.
trace_file="\"$trace_file-\" FMT_pid"
fi
-if test "$trace_backend" = "dtrace" -a "$trace_backend_stap" = "yes" ; then
- echo "CONFIG_SYSTEMTAP_TRACE=y" >> $config_host_mak
+if test "$trace_backend" = "stderr"; then
+ echo "CONFIG_TRACE_STDERR=y" >> $config_host_mak
+fi
+if test "$trace_backend" = "ust"; then
+ echo "CONFIG_TRACE_UST=y" >> $config_host_mak
+fi
+if test "$trace_backend" = "dtrace"; then
+ echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak
+ if "$trace_backend_stap" = "yes" ; then
+ echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
+ fi
fi
echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 0ccfb28..ad4174f 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -180,7 +180,7 @@ STEXI
Output logs to @var{filename}.
ETEXI
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
{
.name = "trace-event",
.args_type = "name:s,option:b",
@@ -1354,7 +1354,7 @@ show roms
@end table
ETEXI
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
STEXI
@item info trace
show contents of trace buffer
diff --git a/monitor.c b/monitor.c
index 04f465a..935aa33 100644
--- a/monitor.c
+++ b/monitor.c
@@ -57,7 +57,7 @@
#include "json-parser.h"
#include "osdep.h"
#include "cpu.h"
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
#include "trace.h"
#endif
#include "ui/qemu-spice.h"
@@ -592,7 +592,7 @@ static void do_help_cmd(Monitor *mon, const QDict *qdict)
help_cmd(mon, qdict_get_try_str(qdict, "name"));
}
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
static void do_change_trace_event_state(Monitor *mon, const QDict *qdict)
{
const char *tp_name = qdict_get_str(qdict, "name");
@@ -996,7 +996,7 @@ static void do_info_cpu_stats(Monitor *mon)
}
#endif
-#if defined(CONFIG_SIMPLE_TRACE)
+#if defined(CONFIG_TRACE_SIMPLE)
static void do_info_trace(Monitor *mon)
{
st_print_trace((FILE *)mon, &monitor_fprintf);
@@ -3135,7 +3135,7 @@ static const mon_cmd_t info_cmds[] = {
.help = "show roms",
.mhandler.info = do_info_roms,
},
-#if defined(CONFIG_SIMPLE_TRACE)
+#if defined(CONFIG_TRACE_SIMPLE)
{
.name = "trace",
.args_type = "",
diff --git a/qemu-config.c b/qemu-config.c
index 139e077..b64edc9 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -303,7 +303,7 @@ static QemuOptsList qemu_mon_opts = {
},
};
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
static QemuOptsList qemu_trace_opts = {
.name = "trace",
.implied_opt_name = "trace",
@@ -517,7 +517,7 @@ static QemuOptsList *vm_config_groups[32] = {
&qemu_global_opts,
&qemu_mon_opts,
&qemu_cpudef_opts,
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
&qemu_trace_opts,
#endif
&qemu_option_rom_opts,
diff --git a/qemu-options.hx b/qemu-options.hx
index 35d95d1..dcb00b7 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2436,7 +2436,7 @@ Normally QEMU loads a configuration file from @var{sysconfdir}/qemu.conf and
@var{sysconfdir}/target-@var{ARCH}.conf on startup. The @code{-nodefconfig}
option will prevent QEMU from loading these configuration files at startup.
ETEXI
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
"-trace\n"
" Specify a trace file to log traces to\n",
diff --git a/simpletrace.h b/simpletrace.h
index 8d893bd..507dd87 100644
--- a/simpletrace.h
+++ b/simpletrace.h
@@ -15,7 +15,7 @@
#include <stdbool.h>
#include <stdio.h>
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
typedef uint64_t TraceEventID;
typedef struct {
@@ -43,6 +43,6 @@ static inline bool st_init(const char *file)
{
return true;
}
-#endif /* !CONFIG_SIMPLE_TRACE */
+#endif /* !CONFIG_TRACE_SIMPLE */
#endif /* SIMPLETRACE_H */
diff --git a/tests/test_path.c b/tests/test_path.c
index 234ed97..7265a94 100644
--- a/tests/test_path.c
+++ b/tests/test_path.c
@@ -4,7 +4,7 @@
#include "../cutils.c"
#include "../path.c"
#include "../trace.c"
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
#include "../simpletrace.c"
#endif
diff --git a/vl.c b/vl.c
index 9cd67a3..8c7aaaa 100644
--- a/vl.c
+++ b/vl.c
@@ -2928,7 +2928,7 @@ int main(int argc, char **argv, char **envp)
}
xen_mode = XEN_ATTACH;
break;
-#ifdef CONFIG_SIMPLE_TRACE
+#ifdef CONFIG_TRACE_SIMPLE
case QEMU_OPTION_trace:
opts = qemu_opts_parse(qemu_find_opts("trace"), optarg, 0);
if (opts) {
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 04/14] trace: [make] replace 'ifeq' with values in CONFIG_TRACE_*
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (2 preceding siblings ...)
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 03/14] trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_* Lluís
@ 2011-08-31 18:30 ` Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 05/14] trace: move backend-specific code into the trace/ directory Lluís
` (10 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:30 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile.objs | 12 +++++-------
1 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/Makefile.objs b/Makefile.objs
index 44d7238..833158b 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -374,16 +374,14 @@ endif
simpletrace.o: simpletrace.c $(GENERATED_HEADERS)
-ifeq ($(TRACE_BACKEND),dtrace)
-trace-obj-y = trace-dtrace.o
-else
+trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o
+ifneq ($(TRACE_BACKEND),dtrace)
trace-obj-y = trace.o
-ifeq ($(TRACE_BACKEND),simple)
-trace-obj-y += simpletrace.o
-trace-obj-y += qemu-timer-common.o
-endif
endif
+trace-obj-$(CONFIG_TRACE_SIMPLE) += simpletrace.o
+trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
+
######################################################################
# smartcard
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 05/14] trace: move backend-specific code into the trace/ directory
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (3 preceding siblings ...)
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 04/14] trace: [make] replace 'ifeq' with values in CONFIG_TRACE_* Lluís
@ 2011-08-31 18:30 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 06/14] trace: avoid conditional code compilation during option parsing Lluís
` (9 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:30 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile | 1
Makefile.objs | 6 +
scripts/tracetool | 2
simpletrace.c | 355 -----------------------------------------------------
simpletrace.h | 48 -------
trace/simple.c | 355 +++++++++++++++++++++++++++++++++++++++++++++++++++++
trace/simple.h | 48 +++++++
vl.c | 2
8 files changed, 410 insertions(+), 407 deletions(-)
delete mode 100644 simpletrace.c
delete mode 100644 simpletrace.h
create mode 100644 trace/simple.c
create mode 100644 trace/simple.h
diff --git a/Makefile b/Makefile
index 8606849..13be25a 100644
--- a/Makefile
+++ b/Makefile
@@ -209,6 +209,7 @@ clean:
rm -Rf .libs
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d qapi/*.o qapi/*.d qga/*.o qga/*.d
rm -f qemu-img-cmds.h
+ rm -f trace/*.o trace/*.d
rm -f trace.c trace.h trace.c-timestamp trace.h-timestamp
rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp
rm -f trace-dtrace.h trace-dtrace.h-timestamp
diff --git a/Makefile.objs b/Makefile.objs
index 833158b..4f8b0ed 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -372,16 +372,18 @@ trace-dtrace.lo: trace-dtrace.dtrace
$(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN trace-dtrace.o")
endif
-simpletrace.o: simpletrace.c $(GENERATED_HEADERS)
+trace/simple.o: trace/simple.c $(GENERATED_HEADERS)
trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o
ifneq ($(TRACE_BACKEND),dtrace)
trace-obj-y = trace.o
endif
-trace-obj-$(CONFIG_TRACE_SIMPLE) += simpletrace.o
+trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
+trace-obj-y += $(addprefix trace/, $(trace-nested-y))
+
######################################################################
# smartcard
diff --git a/scripts/tracetool b/scripts/tracetool
index 2155a57..9ed4fae 100755
--- a/scripts/tracetool
+++ b/scripts/tracetool
@@ -158,7 +158,7 @@ linetoc_end_nop()
linetoh_begin_simple()
{
cat <<EOF
-#include "simpletrace.h"
+#include "trace/simple.h"
EOF
simple_event_num=0
diff --git a/simpletrace.c b/simpletrace.c
deleted file mode 100644
index de355e9..0000000
--- a/simpletrace.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Simple trace backend
- *
- * Copyright IBM, Corp. 2010
- *
- * This work is licensed under the terms of the GNU GPL, version 2. See
- * the COPYING file in the top-level directory.
- *
- */
-
-#include <stdlib.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <time.h>
-#include <signal.h>
-#include <pthread.h>
-#include "qemu-timer.h"
-#include "trace.h"
-
-/** Trace file header event ID */
-#define HEADER_EVENT_ID (~(uint64_t)0) /* avoids conflicting with TraceEventIDs */
-
-/** Trace file magic number */
-#define HEADER_MAGIC 0xf2b177cb0aa429b4ULL
-
-/** Trace file version number, bump if format changes */
-#define HEADER_VERSION 0
-
-/** Records were dropped event ID */
-#define DROPPED_EVENT_ID (~(uint64_t)0 - 1)
-
-/** Trace record is valid */
-#define TRACE_RECORD_VALID ((uint64_t)1 << 63)
-
-/** Trace buffer entry */
-typedef struct {
- uint64_t event;
- uint64_t timestamp_ns;
- uint64_t x1;
- uint64_t x2;
- uint64_t x3;
- uint64_t x4;
- uint64_t x5;
- uint64_t x6;
-} TraceRecord;
-
-enum {
- TRACE_BUF_LEN = 4096,
- TRACE_BUF_FLUSH_THRESHOLD = TRACE_BUF_LEN / 4,
-};
-
-/*
- * Trace records are written out by a dedicated thread. The thread waits for
- * records to become available, writes them out, and then waits again.
- */
-static pthread_mutex_t trace_lock = PTHREAD_MUTEX_INITIALIZER;
-static pthread_cond_t trace_available_cond = PTHREAD_COND_INITIALIZER;
-static pthread_cond_t trace_empty_cond = PTHREAD_COND_INITIALIZER;
-static bool trace_available;
-static bool trace_writeout_enabled;
-
-static TraceRecord trace_buf[TRACE_BUF_LEN];
-static unsigned int trace_idx;
-static FILE *trace_fp;
-static char *trace_file_name = NULL;
-
-/**
- * Read a trace record from the trace buffer
- *
- * @idx Trace buffer index
- * @record Trace record to fill
- *
- * Returns false if the record is not valid.
- */
-static bool get_trace_record(unsigned int idx, TraceRecord *record)
-{
- if (!(trace_buf[idx].event & TRACE_RECORD_VALID)) {
- return false;
- }
-
- __sync_synchronize(); /* read memory barrier before accessing record */
-
- *record = trace_buf[idx];
- record->event &= ~TRACE_RECORD_VALID;
- return true;
-}
-
-/**
- * Kick writeout thread
- *
- * @wait Whether to wait for writeout thread to complete
- */
-static void flush_trace_file(bool wait)
-{
- pthread_mutex_lock(&trace_lock);
- trace_available = true;
- pthread_cond_signal(&trace_available_cond);
-
- if (wait) {
- pthread_cond_wait(&trace_empty_cond, &trace_lock);
- }
-
- pthread_mutex_unlock(&trace_lock);
-}
-
-static void wait_for_trace_records_available(void)
-{
- pthread_mutex_lock(&trace_lock);
- while (!(trace_available && trace_writeout_enabled)) {
- pthread_cond_signal(&trace_empty_cond);
- pthread_cond_wait(&trace_available_cond, &trace_lock);
- }
- trace_available = false;
- pthread_mutex_unlock(&trace_lock);
-}
-
-static void *writeout_thread(void *opaque)
-{
- TraceRecord record;
- unsigned int writeout_idx = 0;
- unsigned int num_available, idx;
- size_t unused __attribute__ ((unused));
-
- for (;;) {
- wait_for_trace_records_available();
-
- num_available = trace_idx - writeout_idx;
- if (num_available > TRACE_BUF_LEN) {
- record = (TraceRecord){
- .event = DROPPED_EVENT_ID,
- .x1 = num_available,
- };
- unused = fwrite(&record, sizeof(record), 1, trace_fp);
- writeout_idx += num_available;
- }
-
- idx = writeout_idx % TRACE_BUF_LEN;
- while (get_trace_record(idx, &record)) {
- trace_buf[idx].event = 0; /* clear valid bit */
- unused = fwrite(&record, sizeof(record), 1, trace_fp);
- idx = ++writeout_idx % TRACE_BUF_LEN;
- }
-
- fflush(trace_fp);
- }
- return NULL;
-}
-
-static void trace(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3,
- uint64_t x4, uint64_t x5, uint64_t x6)
-{
- unsigned int idx;
- uint64_t timestamp;
-
- if (!trace_list[event].state) {
- return;
- }
-
- timestamp = get_clock();
-
- idx = __sync_fetch_and_add(&trace_idx, 1) % TRACE_BUF_LEN;
- trace_buf[idx] = (TraceRecord){
- .event = event,
- .timestamp_ns = timestamp,
- .x1 = x1,
- .x2 = x2,
- .x3 = x3,
- .x4 = x4,
- .x5 = x5,
- .x6 = x6,
- };
- __sync_synchronize(); /* write barrier before marking as valid */
- trace_buf[idx].event |= TRACE_RECORD_VALID;
-
- if ((idx + 1) % TRACE_BUF_FLUSH_THRESHOLD == 0) {
- flush_trace_file(false);
- }
-}
-
-void trace0(TraceEventID event)
-{
- trace(event, 0, 0, 0, 0, 0, 0);
-}
-
-void trace1(TraceEventID event, uint64_t x1)
-{
- trace(event, x1, 0, 0, 0, 0, 0);
-}
-
-void trace2(TraceEventID event, uint64_t x1, uint64_t x2)
-{
- trace(event, x1, x2, 0, 0, 0, 0);
-}
-
-void trace3(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3)
-{
- trace(event, x1, x2, x3, 0, 0, 0);
-}
-
-void trace4(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4)
-{
- trace(event, x1, x2, x3, x4, 0, 0);
-}
-
-void trace5(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5)
-{
- trace(event, x1, x2, x3, x4, x5, 0);
-}
-
-void trace6(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5, uint64_t x6)
-{
- trace(event, x1, x2, x3, x4, x5, x6);
-}
-
-void st_set_trace_file_enabled(bool enable)
-{
- if (enable == !!trace_fp) {
- return; /* no change */
- }
-
- /* Halt trace writeout */
- flush_trace_file(true);
- trace_writeout_enabled = false;
- flush_trace_file(true);
-
- if (enable) {
- static const TraceRecord header = {
- .event = HEADER_EVENT_ID,
- .timestamp_ns = HEADER_MAGIC,
- .x1 = HEADER_VERSION,
- };
-
- trace_fp = fopen(trace_file_name, "w");
- if (!trace_fp) {
- return;
- }
-
- if (fwrite(&header, sizeof header, 1, trace_fp) != 1) {
- fclose(trace_fp);
- trace_fp = NULL;
- return;
- }
-
- /* Resume trace writeout */
- trace_writeout_enabled = true;
- flush_trace_file(false);
- } else {
- fclose(trace_fp);
- trace_fp = NULL;
- }
-}
-
-/**
- * Set the name of a trace file
- *
- * @file The trace file name or NULL for the default name-<pid> set at
- * config time
- */
-bool st_set_trace_file(const char *file)
-{
- st_set_trace_file_enabled(false);
-
- free(trace_file_name);
-
- if (!file) {
- if (asprintf(&trace_file_name, CONFIG_TRACE_FILE, getpid()) < 0) {
- trace_file_name = NULL;
- return false;
- }
- } else {
- if (asprintf(&trace_file_name, "%s", file) < 0) {
- trace_file_name = NULL;
- return false;
- }
- }
-
- st_set_trace_file_enabled(true);
- return true;
-}
-
-void st_print_trace_file_status(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
-{
- stream_printf(stream, "Trace file \"%s\" %s.\n",
- trace_file_name, trace_fp ? "on" : "off");
-}
-
-void st_print_trace(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
-{
- unsigned int i;
-
- for (i = 0; i < TRACE_BUF_LEN; i++) {
- TraceRecord record;
-
- if (!get_trace_record(i, &record)) {
- continue;
- }
- stream_printf(stream, "Event %" PRIu64 " : %" PRIx64 " %" PRIx64
- " %" PRIx64 " %" PRIx64 " %" PRIx64 " %" PRIx64 "\n",
- record.event, record.x1, record.x2,
- record.x3, record.x4, record.x5,
- record.x6);
- }
-}
-
-void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
-{
- unsigned int i;
-
- for (i = 0; i < NR_TRACE_EVENTS; i++) {
- stream_printf(stream, "%s [Event ID %u] : state %u\n",
- trace_list[i].tp_name, i, trace_list[i].state);
- }
-}
-
-bool st_change_trace_event_state(const char *name, bool enabled)
-{
- unsigned int i;
-
- for (i = 0; i < NR_TRACE_EVENTS; i++) {
- if (!strcmp(trace_list[i].tp_name, name)) {
- trace_list[i].state = enabled;
- return true;
- }
- }
- return false;
-}
-
-void st_flush_trace_buffer(void)
-{
- flush_trace_file(true);
-}
-
-bool st_init(const char *file)
-{
- pthread_t thread;
- pthread_attr_t attr;
- sigset_t set, oldset;
- int ret;
-
- pthread_attr_init(&attr);
- pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
-
- sigfillset(&set);
- pthread_sigmask(SIG_SETMASK, &set, &oldset);
- ret = pthread_create(&thread, &attr, writeout_thread, NULL);
- pthread_sigmask(SIG_SETMASK, &oldset, NULL);
-
- if (ret != 0) {
- return false;
- }
-
- atexit(st_flush_trace_buffer);
- st_set_trace_file(file);
- return true;
-}
diff --git a/simpletrace.h b/simpletrace.h
deleted file mode 100644
index 507dd87..0000000
--- a/simpletrace.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Simple trace backend
- *
- * Copyright IBM, Corp. 2010
- *
- * This work is licensed under the terms of the GNU GPL, version 2. See
- * the COPYING file in the top-level directory.
- *
- */
-
-#ifndef SIMPLETRACE_H
-#define SIMPLETRACE_H
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdio.h>
-
-#ifdef CONFIG_TRACE_SIMPLE
-typedef uint64_t TraceEventID;
-
-typedef struct {
- const char *tp_name;
- bool state;
-} TraceEvent;
-
-void trace0(TraceEventID event);
-void trace1(TraceEventID event, uint64_t x1);
-void trace2(TraceEventID event, uint64_t x1, uint64_t x2);
-void trace3(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3);
-void trace4(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4);
-void trace5(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5);
-void trace6(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5, uint64_t x6);
-void st_print_trace(FILE *stream, fprintf_function stream_printf);
-void st_print_trace_events(FILE *stream, fprintf_function stream_printf);
-bool st_change_trace_event_state(const char *tname, bool tstate);
-void st_print_trace_file_status(FILE *stream, fprintf_function stream_printf);
-void st_set_trace_file_enabled(bool enable);
-bool st_set_trace_file(const char *file);
-void st_flush_trace_buffer(void);
-bool st_init(const char *file);
-#else
-static inline bool st_init(const char *file)
-{
- return true;
-}
-#endif /* !CONFIG_TRACE_SIMPLE */
-
-#endif /* SIMPLETRACE_H */
diff --git a/trace/simple.c b/trace/simple.c
new file mode 100644
index 0000000..de355e9
--- /dev/null
+++ b/trace/simple.c
@@ -0,0 +1,355 @@
+/*
+ * Simple trace backend
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <time.h>
+#include <signal.h>
+#include <pthread.h>
+#include "qemu-timer.h"
+#include "trace.h"
+
+/** Trace file header event ID */
+#define HEADER_EVENT_ID (~(uint64_t)0) /* avoids conflicting with TraceEventIDs */
+
+/** Trace file magic number */
+#define HEADER_MAGIC 0xf2b177cb0aa429b4ULL
+
+/** Trace file version number, bump if format changes */
+#define HEADER_VERSION 0
+
+/** Records were dropped event ID */
+#define DROPPED_EVENT_ID (~(uint64_t)0 - 1)
+
+/** Trace record is valid */
+#define TRACE_RECORD_VALID ((uint64_t)1 << 63)
+
+/** Trace buffer entry */
+typedef struct {
+ uint64_t event;
+ uint64_t timestamp_ns;
+ uint64_t x1;
+ uint64_t x2;
+ uint64_t x3;
+ uint64_t x4;
+ uint64_t x5;
+ uint64_t x6;
+} TraceRecord;
+
+enum {
+ TRACE_BUF_LEN = 4096,
+ TRACE_BUF_FLUSH_THRESHOLD = TRACE_BUF_LEN / 4,
+};
+
+/*
+ * Trace records are written out by a dedicated thread. The thread waits for
+ * records to become available, writes them out, and then waits again.
+ */
+static pthread_mutex_t trace_lock = PTHREAD_MUTEX_INITIALIZER;
+static pthread_cond_t trace_available_cond = PTHREAD_COND_INITIALIZER;
+static pthread_cond_t trace_empty_cond = PTHREAD_COND_INITIALIZER;
+static bool trace_available;
+static bool trace_writeout_enabled;
+
+static TraceRecord trace_buf[TRACE_BUF_LEN];
+static unsigned int trace_idx;
+static FILE *trace_fp;
+static char *trace_file_name = NULL;
+
+/**
+ * Read a trace record from the trace buffer
+ *
+ * @idx Trace buffer index
+ * @record Trace record to fill
+ *
+ * Returns false if the record is not valid.
+ */
+static bool get_trace_record(unsigned int idx, TraceRecord *record)
+{
+ if (!(trace_buf[idx].event & TRACE_RECORD_VALID)) {
+ return false;
+ }
+
+ __sync_synchronize(); /* read memory barrier before accessing record */
+
+ *record = trace_buf[idx];
+ record->event &= ~TRACE_RECORD_VALID;
+ return true;
+}
+
+/**
+ * Kick writeout thread
+ *
+ * @wait Whether to wait for writeout thread to complete
+ */
+static void flush_trace_file(bool wait)
+{
+ pthread_mutex_lock(&trace_lock);
+ trace_available = true;
+ pthread_cond_signal(&trace_available_cond);
+
+ if (wait) {
+ pthread_cond_wait(&trace_empty_cond, &trace_lock);
+ }
+
+ pthread_mutex_unlock(&trace_lock);
+}
+
+static void wait_for_trace_records_available(void)
+{
+ pthread_mutex_lock(&trace_lock);
+ while (!(trace_available && trace_writeout_enabled)) {
+ pthread_cond_signal(&trace_empty_cond);
+ pthread_cond_wait(&trace_available_cond, &trace_lock);
+ }
+ trace_available = false;
+ pthread_mutex_unlock(&trace_lock);
+}
+
+static void *writeout_thread(void *opaque)
+{
+ TraceRecord record;
+ unsigned int writeout_idx = 0;
+ unsigned int num_available, idx;
+ size_t unused __attribute__ ((unused));
+
+ for (;;) {
+ wait_for_trace_records_available();
+
+ num_available = trace_idx - writeout_idx;
+ if (num_available > TRACE_BUF_LEN) {
+ record = (TraceRecord){
+ .event = DROPPED_EVENT_ID,
+ .x1 = num_available,
+ };
+ unused = fwrite(&record, sizeof(record), 1, trace_fp);
+ writeout_idx += num_available;
+ }
+
+ idx = writeout_idx % TRACE_BUF_LEN;
+ while (get_trace_record(idx, &record)) {
+ trace_buf[idx].event = 0; /* clear valid bit */
+ unused = fwrite(&record, sizeof(record), 1, trace_fp);
+ idx = ++writeout_idx % TRACE_BUF_LEN;
+ }
+
+ fflush(trace_fp);
+ }
+ return NULL;
+}
+
+static void trace(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3,
+ uint64_t x4, uint64_t x5, uint64_t x6)
+{
+ unsigned int idx;
+ uint64_t timestamp;
+
+ if (!trace_list[event].state) {
+ return;
+ }
+
+ timestamp = get_clock();
+
+ idx = __sync_fetch_and_add(&trace_idx, 1) % TRACE_BUF_LEN;
+ trace_buf[idx] = (TraceRecord){
+ .event = event,
+ .timestamp_ns = timestamp,
+ .x1 = x1,
+ .x2 = x2,
+ .x3 = x3,
+ .x4 = x4,
+ .x5 = x5,
+ .x6 = x6,
+ };
+ __sync_synchronize(); /* write barrier before marking as valid */
+ trace_buf[idx].event |= TRACE_RECORD_VALID;
+
+ if ((idx + 1) % TRACE_BUF_FLUSH_THRESHOLD == 0) {
+ flush_trace_file(false);
+ }
+}
+
+void trace0(TraceEventID event)
+{
+ trace(event, 0, 0, 0, 0, 0, 0);
+}
+
+void trace1(TraceEventID event, uint64_t x1)
+{
+ trace(event, x1, 0, 0, 0, 0, 0);
+}
+
+void trace2(TraceEventID event, uint64_t x1, uint64_t x2)
+{
+ trace(event, x1, x2, 0, 0, 0, 0);
+}
+
+void trace3(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3)
+{
+ trace(event, x1, x2, x3, 0, 0, 0);
+}
+
+void trace4(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4)
+{
+ trace(event, x1, x2, x3, x4, 0, 0);
+}
+
+void trace5(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5)
+{
+ trace(event, x1, x2, x3, x4, x5, 0);
+}
+
+void trace6(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5, uint64_t x6)
+{
+ trace(event, x1, x2, x3, x4, x5, x6);
+}
+
+void st_set_trace_file_enabled(bool enable)
+{
+ if (enable == !!trace_fp) {
+ return; /* no change */
+ }
+
+ /* Halt trace writeout */
+ flush_trace_file(true);
+ trace_writeout_enabled = false;
+ flush_trace_file(true);
+
+ if (enable) {
+ static const TraceRecord header = {
+ .event = HEADER_EVENT_ID,
+ .timestamp_ns = HEADER_MAGIC,
+ .x1 = HEADER_VERSION,
+ };
+
+ trace_fp = fopen(trace_file_name, "w");
+ if (!trace_fp) {
+ return;
+ }
+
+ if (fwrite(&header, sizeof header, 1, trace_fp) != 1) {
+ fclose(trace_fp);
+ trace_fp = NULL;
+ return;
+ }
+
+ /* Resume trace writeout */
+ trace_writeout_enabled = true;
+ flush_trace_file(false);
+ } else {
+ fclose(trace_fp);
+ trace_fp = NULL;
+ }
+}
+
+/**
+ * Set the name of a trace file
+ *
+ * @file The trace file name or NULL for the default name-<pid> set at
+ * config time
+ */
+bool st_set_trace_file(const char *file)
+{
+ st_set_trace_file_enabled(false);
+
+ free(trace_file_name);
+
+ if (!file) {
+ if (asprintf(&trace_file_name, CONFIG_TRACE_FILE, getpid()) < 0) {
+ trace_file_name = NULL;
+ return false;
+ }
+ } else {
+ if (asprintf(&trace_file_name, "%s", file) < 0) {
+ trace_file_name = NULL;
+ return false;
+ }
+ }
+
+ st_set_trace_file_enabled(true);
+ return true;
+}
+
+void st_print_trace_file_status(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
+{
+ stream_printf(stream, "Trace file \"%s\" %s.\n",
+ trace_file_name, trace_fp ? "on" : "off");
+}
+
+void st_print_trace(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
+{
+ unsigned int i;
+
+ for (i = 0; i < TRACE_BUF_LEN; i++) {
+ TraceRecord record;
+
+ if (!get_trace_record(i, &record)) {
+ continue;
+ }
+ stream_printf(stream, "Event %" PRIu64 " : %" PRIx64 " %" PRIx64
+ " %" PRIx64 " %" PRIx64 " %" PRIx64 " %" PRIx64 "\n",
+ record.event, record.x1, record.x2,
+ record.x3, record.x4, record.x5,
+ record.x6);
+ }
+}
+
+void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_TRACE_EVENTS; i++) {
+ stream_printf(stream, "%s [Event ID %u] : state %u\n",
+ trace_list[i].tp_name, i, trace_list[i].state);
+ }
+}
+
+bool st_change_trace_event_state(const char *name, bool enabled)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_TRACE_EVENTS; i++) {
+ if (!strcmp(trace_list[i].tp_name, name)) {
+ trace_list[i].state = enabled;
+ return true;
+ }
+ }
+ return false;
+}
+
+void st_flush_trace_buffer(void)
+{
+ flush_trace_file(true);
+}
+
+bool st_init(const char *file)
+{
+ pthread_t thread;
+ pthread_attr_t attr;
+ sigset_t set, oldset;
+ int ret;
+
+ pthread_attr_init(&attr);
+ pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
+
+ sigfillset(&set);
+ pthread_sigmask(SIG_SETMASK, &set, &oldset);
+ ret = pthread_create(&thread, &attr, writeout_thread, NULL);
+ pthread_sigmask(SIG_SETMASK, &oldset, NULL);
+
+ if (ret != 0) {
+ return false;
+ }
+
+ atexit(st_flush_trace_buffer);
+ st_set_trace_file(file);
+ return true;
+}
diff --git a/trace/simple.h b/trace/simple.h
new file mode 100644
index 0000000..77633ab
--- /dev/null
+++ b/trace/simple.h
@@ -0,0 +1,48 @@
+/*
+ * Simple trace backend
+ *
+ * Copyright IBM, Corp. 2010
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef TRACE_SIMPLE_H
+#define TRACE_SIMPLE_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdio.h>
+
+#ifdef CONFIG_TRACE_SIMPLE
+typedef uint64_t TraceEventID;
+
+typedef struct {
+ const char *tp_name;
+ bool state;
+} TraceEvent;
+
+void trace0(TraceEventID event);
+void trace1(TraceEventID event, uint64_t x1);
+void trace2(TraceEventID event, uint64_t x1, uint64_t x2);
+void trace3(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3);
+void trace4(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4);
+void trace5(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5);
+void trace6(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5, uint64_t x6);
+void st_print_trace(FILE *stream, fprintf_function stream_printf);
+void st_print_trace_events(FILE *stream, fprintf_function stream_printf);
+bool st_change_trace_event_state(const char *tname, bool tstate);
+void st_print_trace_file_status(FILE *stream, fprintf_function stream_printf);
+void st_set_trace_file_enabled(bool enable);
+bool st_set_trace_file(const char *file);
+void st_flush_trace_buffer(void);
+bool st_init(const char *file);
+#else
+static inline bool st_init(const char *file)
+{
+ return true;
+}
+#endif /* !CONFIG_TRACE_SIMPLE */
+
+#endif /* TRACE_SIMPLE_H */
diff --git a/vl.c b/vl.c
index 8c7aaaa..145d738 100644
--- a/vl.c
+++ b/vl.c
@@ -156,7 +156,7 @@ int main(int argc, char **argv)
#include "slirp/libslirp.h"
#include "trace.h"
-#include "simpletrace.h"
+#include "trace/simple.h"
#include "qemu-queue.h"
#include "cpus.h"
#include "arch_init.h"
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 06/14] trace: avoid conditional code compilation during option parsing
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (4 preceding siblings ...)
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 05/14] trace: move backend-specific code into the trace/ directory Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 07/14] trace: generalize the "property" concept in the trace-events file Lluís
` (8 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
A default implementation for backend-specific routines is provided in
"trace/default.c", which backends can override by setting "trace_default=no" in
"configure".
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile.objs | 2 ++
configure | 6 ++++++
qemu-config.c | 4 ----
qemu-options.hx | 6 ++++--
trace/control.h | 24 ++++++++++++++++++++++++
trace/default.c | 21 +++++++++++++++++++++
trace/simple.c | 10 ++++++----
trace/simple.h | 8 --------
vl.c | 17 +++++++++--------
9 files changed, 72 insertions(+), 26 deletions(-)
create mode 100644 trace/control.h
create mode 100644 trace/default.c
diff --git a/Makefile.objs b/Makefile.objs
index 4f8b0ed..57a80e6 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -379,6 +379,8 @@ ifneq ($(TRACE_BACKEND),dtrace)
trace-obj-y = trace.o
endif
+trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
+
trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
diff --git a/configure b/configure
index 163c5aa..f38847a 100755
--- a/configure
+++ b/configure
@@ -3064,12 +3064,15 @@ bsd)
;;
esac
+# use default implementation for tracing backend-specific routines
+trace_default=yes
echo "TRACE_BACKEND=$trace_backend" >> $config_host_mak
if test "$trace_backend" = "nop"; then
echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
fi
if test "$trace_backend" = "simple"; then
echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
+ trace_default=no
# Set the appropriate trace file.
trace_file="\"$trace_file-\" FMT_pid"
fi
@@ -3086,6 +3089,9 @@ if test "$trace_backend" = "dtrace"; then
fi
fi
echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
+if test "$trace_default" = "yes"; then
+ echo "CONFIG_TRACE_DEFAULT=y" >> $config_host_mak
+fi
echo "TOOLS=$tools" >> $config_host_mak
echo "ROMS=$roms" >> $config_host_mak
diff --git a/qemu-config.c b/qemu-config.c
index b64edc9..4f3465d 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -303,7 +303,6 @@ static QemuOptsList qemu_mon_opts = {
},
};
-#ifdef CONFIG_TRACE_SIMPLE
static QemuOptsList qemu_trace_opts = {
.name = "trace",
.implied_opt_name = "trace",
@@ -316,7 +315,6 @@ static QemuOptsList qemu_trace_opts = {
{ /* end of list */ }
},
};
-#endif
static QemuOptsList qemu_cpudef_opts = {
.name = "cpudef",
@@ -517,9 +515,7 @@ static QemuOptsList *vm_config_groups[32] = {
&qemu_global_opts,
&qemu_mon_opts,
&qemu_cpudef_opts,
-#ifdef CONFIG_TRACE_SIMPLE
&qemu_trace_opts,
-#endif
&qemu_option_rom_opts,
&qemu_machine_opts,
&qemu_boot_opts,
diff --git a/qemu-options.hx b/qemu-options.hx
index dcb00b7..2d29933 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2436,17 +2436,19 @@ Normally QEMU loads a configuration file from @var{sysconfdir}/qemu.conf and
@var{sysconfdir}/target-@var{ARCH}.conf on startup. The @code{-nodefconfig}
option will prevent QEMU from loading these configuration files at startup.
ETEXI
-#ifdef CONFIG_TRACE_SIMPLE
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
"-trace\n"
" Specify a trace file to log traces to\n",
QEMU_ARCH_ALL)
STEXI
+HXCOMM This line is not accurate, as the option is backend-specific but HX does
+HXCOMM not support conditional compilation of text.
@item -trace
@findex -trace
Specify a trace file to log output traces to.
+
+This option is available only when using the @var{simple} tracing backend.
ETEXI
-#endif
HXCOMM This is the last statement. Insert new options before this line!
STEXI
diff --git a/trace/control.h b/trace/control.h
new file mode 100644
index 0000000..bb54339
--- /dev/null
+++ b/trace/control.h
@@ -0,0 +1,24 @@
+/*
+ * Interface for configuring and controlling the state of tracing events.
+ *
+ * Copyright (C) 2011 Lluís Vilanova <vilanova@ac.upc.edu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#ifndef TRACE_CONTROL_H
+#define TRACE_CONTROL_H
+
+#include <stdbool.h>
+
+
+/** Initialize the tracing backend.
+ *
+ * @file Name of trace output file; may be NULL.
+ * Corresponds to commandline option "-trace file=...".
+ * @return Whether the backend could be successfully initialized.
+ */
+bool trace_backend_init(const char *file);
+
+#endif /* TRACE_CONTROL_H */
diff --git a/trace/default.c b/trace/default.c
new file mode 100644
index 0000000..42fdb6b
--- /dev/null
+++ b/trace/default.c
@@ -0,0 +1,21 @@
+/*
+ * Default implementation for backend initialization from commandline.
+ *
+ * Copyright (C) 2011 Lluís Vilanova <vilanova@ac.upc.edu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "trace/control.h"
+
+
+bool trace_backend_init(const char *file)
+{
+ if (file) {
+ fprintf(stderr, "error: -trace file=...: "
+ "option not supported by the selected tracing backend\n");
+ return false;
+ }
+ return true;
+}
diff --git a/trace/simple.c b/trace/simple.c
index de355e9..369e860 100644
--- a/trace/simple.c
+++ b/trace/simple.c
@@ -16,6 +16,7 @@
#include <pthread.h>
#include "qemu-timer.h"
#include "trace.h"
+#include "trace/control.h"
/** Trace file header event ID */
#define HEADER_EVENT_ID (~(uint64_t)0) /* avoids conflicting with TraceEventIDs */
@@ -330,7 +331,7 @@ void st_flush_trace_buffer(void)
flush_trace_file(true);
}
-bool st_init(const char *file)
+bool trace_backend_init(const char *file)
{
pthread_t thread;
pthread_attr_t attr;
@@ -346,10 +347,11 @@ bool st_init(const char *file)
pthread_sigmask(SIG_SETMASK, &oldset, NULL);
if (ret != 0) {
- return false;
+ fprintf(stderr, "warning: unable to initialize simple trace backend\n");
+ } else {
+ atexit(st_flush_trace_buffer);
+ st_set_trace_file(file);
}
- atexit(st_flush_trace_buffer);
- st_set_trace_file(file);
return true;
}
diff --git a/trace/simple.h b/trace/simple.h
index 77633ab..08b9a52 100644
--- a/trace/simple.h
+++ b/trace/simple.h
@@ -15,7 +15,6 @@
#include <stdbool.h>
#include <stdio.h>
-#ifdef CONFIG_TRACE_SIMPLE
typedef uint64_t TraceEventID;
typedef struct {
@@ -37,12 +36,5 @@ void st_print_trace_file_status(FILE *stream, fprintf_function stream_printf);
void st_set_trace_file_enabled(bool enable);
bool st_set_trace_file(const char *file);
void st_flush_trace_buffer(void);
-bool st_init(const char *file);
-#else
-static inline bool st_init(const char *file)
-{
- return true;
-}
-#endif /* !CONFIG_TRACE_SIMPLE */
#endif /* TRACE_SIMPLE_H */
diff --git a/vl.c b/vl.c
index 145d738..60322b6 100644
--- a/vl.c
+++ b/vl.c
@@ -156,7 +156,7 @@ int main(int argc, char **argv)
#include "slirp/libslirp.h"
#include "trace.h"
-#include "trace/simple.h"
+#include "trace/control.h"
#include "qemu-queue.h"
#include "cpus.h"
#include "arch_init.h"
@@ -2130,7 +2130,6 @@ int main(int argc, char **argv, char **envp)
int show_vnc_port = 0;
#endif
int defconfig = 1;
- const char *trace_file = NULL;
const char *log_mask = NULL;
const char *log_file = NULL;
GMemVTable mem_trace = {
@@ -2138,6 +2137,7 @@ int main(int argc, char **argv, char **envp)
.realloc = realloc_and_trace,
.free = free_and_trace,
};
+ const char *trace_file = NULL;
atexit(qemu_run_exit_notifiers);
error_set_progname(argv[0]);
@@ -2928,14 +2928,15 @@ int main(int argc, char **argv, char **envp)
}
xen_mode = XEN_ATTACH;
break;
-#ifdef CONFIG_TRACE_SIMPLE
case QEMU_OPTION_trace:
+ {
opts = qemu_opts_parse(qemu_find_opts("trace"), optarg, 0);
- if (opts) {
- trace_file = qemu_opt_get(opts, "file");
+ if (!opts) {
+ exit(1);
}
+ trace_file = qemu_opt_get(opts, "file");
break;
-#endif
+ }
case QEMU_OPTION_readconfig:
{
int ret = qemu_read_config_file(optarg);
@@ -2993,8 +2994,8 @@ int main(int argc, char **argv, char **envp)
set_cpu_log(log_mask);
}
- if (!st_init(trace_file)) {
- fprintf(stderr, "warning: unable to initialize simple trace backend\n");
+ if (!trace_backend_init(trace_file)) {
+ exit(1);
}
/* If no data_dir is specified then try to find it relative to the
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 07/14] trace: generalize the "property" concept in the trace-events file
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (5 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 06/14] trace: avoid conditional code compilation during option parsing Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 08/14] trace-state: separate trace event control and query routines from the simple backend Lluís
` (7 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
This adds/modifies the following functions:
* get_name: Get _only_ the event name
* has_property: Return whether an event has a property (keyword before the event
name)
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
docs/tracing.txt | 4 +--
scripts/tracetool | 73 ++++++++++++++++++++++++-----------------------------
2 files changed, 35 insertions(+), 42 deletions(-)
diff --git a/docs/tracing.txt b/docs/tracing.txt
index c99a0f2..1ad106a 100644
--- a/docs/tracing.txt
+++ b/docs/tracing.txt
@@ -38,7 +38,7 @@ generate code for the trace events. Trace events are invoked directly from
source code like this:
#include "trace.h" /* needed for trace event prototype */
-
+
void *qemu_malloc(size_t size)
{
void *ptr;
@@ -103,7 +103,7 @@ portability macros, ensure they are preceded and followed by double quotes:
4. Name trace events after their function. If there are multiple trace events
in one function, append a unique distinguisher at the end of the name.
-5. Declare trace events with the "disable" keyword. Some trace events can
+5. Declare trace events with the "disable" property. Some trace events can
produce a lot of output and users are typically only interested in a subset
of trace events. Marking trace events disabled by default saves the user
from having to manually disable noisy trace events.
diff --git a/scripts/tracetool b/scripts/tracetool
index 9ed4fae..e649a5b 100755
--- a/scripts/tracetool
+++ b/scripts/tracetool
@@ -43,7 +43,26 @@ EOF
# Get the name of a trace event
get_name()
{
- echo ${1%%\(*}
+ local name
+ name=${1%%\(*}
+ echo "${name##* }"
+}
+
+# Get the given property of a trace event
+# 1: trace-events line
+# 2: property name
+# -> return 0 if property is present, or 1 otherwise
+has_property()
+{
+ local props prop
+ props=${1%%\(*}
+ props=${props% *}
+ for prop in $props; do
+ if [ "$prop" = "$2" ]; then
+ return 0
+ fi
+ done
+ return 1
}
# Get the argument list of a trace event, including types and names
@@ -101,20 +120,6 @@ get_fmt()
echo "$fmt"
}
-# Get the state of a trace event
-get_state()
-{
- local str disable state
- str=$(get_name "$1")
- disable=${str##disable }
- if [ "$disable" = "$str" ] ; then
- state=1
- else
- state=0
- fi
- echo "$state"
-}
-
linetoh_begin_nop()
{
return
@@ -174,14 +179,10 @@ cast_args_to_uint64_t()
linetoh_simple()
{
- local name args argc trace_args state
+ local name args argc trace_args
name=$(get_name "$1")
args=$(get_args "$1")
argc=$(get_argc "$1")
- state=$(get_state "$1")
- if [ "$state" = "0" ]; then
- name=${name##disable }
- fi
trace_args="$simple_event_num"
if [ "$argc" -gt 0 ]
@@ -222,9 +223,10 @@ linetoc_simple()
{
local name state
name=$(get_name "$1")
- state=$(get_state "$1")
- if [ "$state" = "0" ] ; then
- name=${name##disable }
+ if has_property "$1" "disable"; then
+ state="0"
+ else
+ state="1"
fi
cat <<EOF
{.tp_name = "$name", .state=$state},
@@ -379,14 +381,10 @@ EOF
linetoh_dtrace()
{
- local name args argnames state nameupper
+ local name args argnames nameupper
name=$(get_name "$1")
args=$(get_args "$1")
argnames=$(get_argnames "$1", ",")
- state=$(get_state "$1")
- if [ "$state" = "0" ] ; then
- name=${name##disable }
- fi
nameupper=`echo $name | tr '[:lower:]' '[:upper:]'`
@@ -430,13 +428,9 @@ EOF
linetod_dtrace()
{
- local name args state
+ local name args
name=$(get_name "$1")
args=$(get_args "$1")
- state=$(get_state "$1")
- if [ "$state" = "0" ] ; then
- name=${name##disable }
- fi
# DTrace provider syntax expects foo() for empty
# params, not foo(void)
@@ -464,14 +458,10 @@ linetostap_begin_dtrace()
linetostap_dtrace()
{
- local i arg name args arglist state
+ local i arg name args arglist
name=$(get_name "$1")
args=$(get_args "$1")
arglist=$(get_argnames "$1", "")
- state=$(get_state "$1")
- if [ "$state" = "0" ] ; then
- name=${name##disable }
- fi
# Define prototype for probe arguments
cat <<EOF
@@ -517,9 +507,12 @@ convert()
test -z "${str%%#*}" && continue
# Process the line. The nop backend handles disabled lines.
- disable=${str%%disable *}
+ disable="0"
+ if has_property "$str" "disable"; then
+ disable="1"
+ fi
echo
- if test -z "$disable"; then
+ if [ "$disable" = "1" ]; then
# Pass the disabled state as an arg for the simple
# or DTrace backends which handle it dynamically.
# For all other backends, call lineto$1_nop()
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 08/14] trace-state: separate trace event control and query routines from the simple backend
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (6 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 07/14] trace: generalize the "property" concept in the trace-events file Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 09/14] trace-state: always compile support for controlling and querying trace event states Lluís
` (6 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Generalize the 'st_print_trace_events' and 'st_change_trace_event_state' into
backend-specific 'trace_print_events' and 'trace_event_set_state' (respectively)
in the "trace/control.h" file.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
hmp-commands.hx | 2 +-
monitor.c | 11 ++++++-----
trace/control.h | 11 ++++++++++-
trace/default.c | 15 +++++++++++++++
trace/simple.c | 16 ++++++++--------
trace/simple.h | 2 --
6 files changed, 40 insertions(+), 17 deletions(-)
diff --git a/hmp-commands.hx b/hmp-commands.hx
index ad4174f..d77e75f 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -186,7 +186,7 @@ ETEXI
.args_type = "name:s,option:b",
.params = "name on|off",
.help = "changes status of a specific trace event",
- .mhandler.cmd = do_change_trace_event_state,
+ .mhandler.cmd = do_trace_event_set_state,
},
STEXI
diff --git a/monitor.c b/monitor.c
index 935aa33..2cff62d 100644
--- a/monitor.c
+++ b/monitor.c
@@ -60,6 +60,7 @@
#ifdef CONFIG_TRACE_SIMPLE
#include "trace.h"
#endif
+#include "trace/control.h"
#include "ui/qemu-spice.h"
//#define DEBUG
@@ -593,11 +594,11 @@ static void do_help_cmd(Monitor *mon, const QDict *qdict)
}
#ifdef CONFIG_TRACE_SIMPLE
-static void do_change_trace_event_state(Monitor *mon, const QDict *qdict)
+static void do_trace_event_set_state(Monitor *mon, const QDict *qdict)
{
const char *tp_name = qdict_get_str(qdict, "name");
bool new_state = qdict_get_bool(qdict, "option");
- int ret = st_change_trace_event_state(tp_name, new_state);
+ int ret = trace_event_set_state(tp_name, new_state);
if (!ret) {
monitor_printf(mon, "unknown event name \"%s\"\n", tp_name);
@@ -1002,9 +1003,9 @@ static void do_info_trace(Monitor *mon)
st_print_trace((FILE *)mon, &monitor_fprintf);
}
-static void do_info_trace_events(Monitor *mon)
+static void do_trace_print_events(Monitor *mon)
{
- st_print_trace_events((FILE *)mon, &monitor_fprintf);
+ trace_print_events((FILE *)mon, &monitor_fprintf);
}
#endif
@@ -3148,7 +3149,7 @@ static const mon_cmd_t info_cmds[] = {
.args_type = "",
.params = "",
.help = "show available trace-events & their state",
- .mhandler.info = do_info_trace_events,
+ .mhandler.info = do_trace_print_events,
},
#endif
{
diff --git a/trace/control.h b/trace/control.h
index bb54339..c99b4d5 100644
--- a/trace/control.h
+++ b/trace/control.h
@@ -10,7 +10,16 @@
#ifndef TRACE_CONTROL_H
#define TRACE_CONTROL_H
-#include <stdbool.h>
+#include "qemu-common.h"
+
+
+/** Print the state of all events. */
+void trace_print_events(FILE *stream, fprintf_function stream_printf);
+/** Set the state of an event.
+ *
+ * @return Whether the state changed.
+ */
+bool trace_event_set_state(const char *name, bool state);
/** Initialize the tracing backend.
diff --git a/trace/default.c b/trace/default.c
index 42fdb6b..3573d5b 100644
--- a/trace/default.c
+++ b/trace/default.c
@@ -10,6 +10,21 @@
#include "trace/control.h"
+void trace_print_events(FILE *stream, fprintf_function stream_printf)
+{
+ fprintf(stderr, "warning: "
+ "cannot print the trace events with the current backend\n");
+ stream_printf(stream, "error: "
+ "operation not supported with the current backend\n");
+}
+
+bool trace_event_set_state(const char *name, bool state)
+{
+ fprintf(stderr, "warning: "
+ "cannot set the state of a trace event with the current backend\n");
+ return false;
+}
+
bool trace_backend_init(const char *file)
{
if (file) {
diff --git a/trace/simple.c b/trace/simple.c
index 369e860..70689e9 100644
--- a/trace/simple.c
+++ b/trace/simple.c
@@ -303,7 +303,12 @@ void st_print_trace(FILE *stream, int (*stream_printf)(FILE *stream, const char
}
}
-void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
+void st_flush_trace_buffer(void)
+{
+ flush_trace_file(true);
+}
+
+void trace_print_events(FILE *stream, fprintf_function stream_printf)
{
unsigned int i;
@@ -313,24 +318,19 @@ void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, cons
}
}
-bool st_change_trace_event_state(const char *name, bool enabled)
+bool trace_event_set_state(const char *name, bool state)
{
unsigned int i;
for (i = 0; i < NR_TRACE_EVENTS; i++) {
if (!strcmp(trace_list[i].tp_name, name)) {
- trace_list[i].state = enabled;
+ trace_list[i].state = state;
return true;
}
}
return false;
}
-void st_flush_trace_buffer(void)
-{
- flush_trace_file(true);
-}
-
bool trace_backend_init(const char *file)
{
pthread_t thread;
diff --git a/trace/simple.h b/trace/simple.h
index 08b9a52..466e75b 100644
--- a/trace/simple.h
+++ b/trace/simple.h
@@ -30,8 +30,6 @@ void trace4(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t
void trace5(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5);
void trace6(TraceEventID event, uint64_t x1, uint64_t x2, uint64_t x3, uint64_t x4, uint64_t x5, uint64_t x6);
void st_print_trace(FILE *stream, fprintf_function stream_printf);
-void st_print_trace_events(FILE *stream, fprintf_function stream_printf);
-bool st_change_trace_event_state(const char *tname, bool tstate);
void st_print_trace_file_status(FILE *stream, fprintf_function stream_printf);
void st_set_trace_file_enabled(bool enable);
bool st_set_trace_file(const char *file);
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 09/14] trace-state: always compile support for controlling and querying trace event states
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (7 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 08/14] trace-state: separate trace event control and query routines from the simple backend Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 10/14] trace-state: add "-trace events" argument to control initial state Lluís
` (5 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
The current interface is generic for this small set of operations, and thus
other backends can easily modify the "trace/control.c" file to add their own
implementation.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
docs/tracing.txt | 48 ++++++++++++++++++++++++++++++------------------
hmp-commands.hx | 7 +++++--
monitor.c | 9 +++++----
3 files changed, 40 insertions(+), 24 deletions(-)
diff --git a/docs/tracing.txt b/docs/tracing.txt
index 1ad106a..41eb8e6 100644
--- a/docs/tracing.txt
+++ b/docs/tracing.txt
@@ -108,6 +108,36 @@ portability macros, ensure they are preceded and followed by double quotes:
of trace events. Marking trace events disabled by default saves the user
from having to manually disable noisy trace events.
+== Generic interface and monitor commands ==
+
+You can programmatically query and control the dynamic state of trace events
+through a backend-agnostic interface:
+
+* trace_print_events
+
+* trace_event_set_state
+ Enables or disables trace events at runtime inside QEMU.
+ The function returns "true" if the state of the event has been successfully
+ changed, or "false" otherwise:
+
+ #include "trace/control.h"
+
+ trace_event_set_state("virtio_irq", true); /* enable */
+ [...]
+ trace_event_set_state("virtio_irq", false); /* disable */
+
+Note that some of the backends do not provide an implementation for this
+interface, in which case QEMU will just print a warning.
+
+This functionality is also provided through monitor commands:
+
+* info trace-events
+ View available trace events and their state. State 1 means enabled, state 0
+ means disabled.
+
+* trace-event NAME on|off
+ Enable/disable a given trace event.
+
== Trace backends ==
The "tracetool" script automates tedious trace event code generation and also
@@ -157,27 +187,9 @@ unless you have specific needs for more advanced backends.
flushed and emptied. This means the 'info trace' will display few or no
entries if the buffer has just been flushed.
-* info trace-events
- View available trace events and their state. State 1 means enabled, state 0
- means disabled.
-
-* trace-event NAME on|off
- Enable/disable a given trace event.
-
* trace-file on|off|flush|set <path>
Enable/disable/flush the trace file or set the trace file name.
-==== Enabling/disabling trace events programmatically ====
-
-The st_change_trace_event_state() function can be used to enable or disable trace
-events at runtime inside QEMU:
-
- #include "trace.h"
-
- st_change_trace_event_state("virtio_irq", true); /* enable */
- [...]
- st_change_trace_event_state("virtio_irq", false); /* disable */
-
==== Analyzing trace files ====
The "simple" backend produces binary trace files that can be formatted with the
diff --git a/hmp-commands.hx b/hmp-commands.hx
index d77e75f..9e1cca8 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -180,7 +180,6 @@ STEXI
Output logs to @var{filename}.
ETEXI
-#ifdef CONFIG_TRACE_SIMPLE
{
.name = "trace-event",
.args_type = "name:s,option:b",
@@ -195,6 +194,7 @@ STEXI
changes status of a trace event
ETEXI
+#if defined(CONFIG_SIMPLE_TRACE)
{
.name = "trace-file",
.args_type = "op:s?,arg:F?",
@@ -1358,10 +1358,13 @@ ETEXI
STEXI
@item info trace
show contents of trace buffer
+ETEXI
+#endif
+
+STEXI
@item info trace-events
show available trace events and their state
ETEXI
-#endif
STEXI
@end table
diff --git a/monitor.c b/monitor.c
index 2cff62d..df0f622 100644
--- a/monitor.c
+++ b/monitor.c
@@ -57,8 +57,9 @@
#include "json-parser.h"
#include "osdep.h"
#include "cpu.h"
+#include "trace/control.h"
#ifdef CONFIG_TRACE_SIMPLE
-#include "trace.h"
+#include "trace/simple.h"
#endif
#include "trace/control.h"
#include "ui/qemu-spice.h"
@@ -593,7 +594,6 @@ static void do_help_cmd(Monitor *mon, const QDict *qdict)
help_cmd(mon, qdict_get_try_str(qdict, "name"));
}
-#ifdef CONFIG_TRACE_SIMPLE
static void do_trace_event_set_state(Monitor *mon, const QDict *qdict)
{
const char *tp_name = qdict_get_str(qdict, "name");
@@ -605,6 +605,7 @@ static void do_trace_event_set_state(Monitor *mon, const QDict *qdict)
}
}
+#ifdef CONFIG_SIMPLE_TRACE
static void do_trace_file(Monitor *mon, const QDict *qdict)
{
const char *op = qdict_get_try_str(qdict, "op");
@@ -1002,12 +1003,12 @@ static void do_info_trace(Monitor *mon)
{
st_print_trace((FILE *)mon, &monitor_fprintf);
}
+#endif
static void do_trace_print_events(Monitor *mon)
{
trace_print_events((FILE *)mon, &monitor_fprintf);
}
-#endif
/**
* do_quit(): Quit QEMU execution
@@ -3144,6 +3145,7 @@ static const mon_cmd_t info_cmds[] = {
.help = "show current contents of trace buffer",
.mhandler.info = do_info_trace,
},
+#endif
{
.name = "trace-events",
.args_type = "",
@@ -3151,7 +3153,6 @@ static const mon_cmd_t info_cmds[] = {
.help = "show available trace-events & their state",
.mhandler.info = do_trace_print_events,
},
-#endif
{
.name = NULL,
},
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 10/14] trace-state: add "-trace events" argument to control initial state
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (8 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 09/14] trace-state: always compile support for controlling and querying trace event states Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 11/14] trace-state: always use the "nop" backend on events with the "disable" keyword Lluís
` (4 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
The "-trace events" argument can be used to provide a file with a list of trace
event names that will be enabled prior to starting execution, thus providing
early tracing.
This saves the user from manually toggling event states through the monitor
interface or whichever backend-specific interface.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile.objs | 2 ++
docs/tracing.txt | 4 ++++
qemu-config.c | 3 +++
qemu-options.hx | 26 +++++++++++++++++++-------
trace/control.c | 42 ++++++++++++++++++++++++++++++++++++++++++
trace/control.h | 14 +++++++++++---
trace/default.c | 7 ++++++-
trace/simple.c | 3 ++-
vl.c | 4 +++-
9 files changed, 92 insertions(+), 13 deletions(-)
create mode 100644 trace/control.c
diff --git a/Makefile.objs b/Makefile.objs
index 57a80e6..036a4eb 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -384,6 +384,8 @@ trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
+trace-nested-y += control.o
+
trace-obj-y += $(addprefix trace/, $(trace-nested-y))
######################################################################
diff --git a/docs/tracing.txt b/docs/tracing.txt
index 41eb8e6..455da37 100644
--- a/docs/tracing.txt
+++ b/docs/tracing.txt
@@ -138,6 +138,10 @@ This functionality is also provided through monitor commands:
* trace-event NAME on|off
Enable/disable a given trace event.
+The "-trace events=<file>" command line argument can be used to enable the
+events listed in <file> from the very beginning of the program. This file must
+contain one event name per line.
+
== Trace backends ==
The "tracetool" script automates tedious trace event code generation and also
diff --git a/qemu-config.c b/qemu-config.c
index 4f3465d..7a7854f 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -309,6 +309,9 @@ static QemuOptsList qemu_trace_opts = {
.head = QTAILQ_HEAD_INITIALIZER(qemu_trace_opts.head),
.desc = {
{
+ .name = "events",
+ .type = QEMU_OPT_STRING,
+ },{
.name = "file",
.type = QEMU_OPT_STRING,
},
diff --git a/qemu-options.hx b/qemu-options.hx
index 2d29933..edd181b 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2437,17 +2437,29 @@ Normally QEMU loads a configuration file from @var{sysconfdir}/qemu.conf and
option will prevent QEMU from loading these configuration files at startup.
ETEXI
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
- "-trace\n"
- " Specify a trace file to log traces to\n",
+ "-trace [events=<file>][,file=<file>]\n"
+ " specify tracing options\n",
QEMU_ARCH_ALL)
STEXI
-HXCOMM This line is not accurate, as the option is backend-specific but HX does
-HXCOMM not support conditional compilation of text.
-@item -trace
+HXCOMM This line is not accurate, as some sub-options are backend-specific but
+HXCOMM HX does not support conditional compilation of text.
+@item -trace [events=@var{file}][,file=@var{file}]
@findex -trace
-Specify a trace file to log output traces to.
-This option is available only when using the @var{simple} tracing backend.
+Specify tracing options.
+
+@table @option
+@item events=@var{file}
+Immediately enable events listed in @var{file}.
+The file must contain one event name (as listed in the @var{trace-events} file)
+per line.
+
+This option is only available when using the @var{simple} tracing backend.
+@item file=@var{file}
+Log output traces to @var{file}.
+
+This option is only available when using the @var{simple} tracing backend.
+@end table
ETEXI
HXCOMM This is the last statement. Insert new options before this line!
diff --git a/trace/control.c b/trace/control.c
new file mode 100644
index 0000000..4c5527d
--- /dev/null
+++ b/trace/control.c
@@ -0,0 +1,42 @@
+/*
+ * Interface for configuring and controlling the state of tracing events.
+ *
+ * Copyright (C) 2011 Lluís Vilanova <vilanova@ac.upc.edu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "trace/control.h"
+
+
+void trace_backend_init_events(const char *fname)
+{
+ if (fname == NULL) {
+ return;
+ }
+
+ FILE *fp = fopen(fname, "r");
+ if (!fp) {
+ fprintf(stderr, "error: could not open trace events file '%s': %s\n",
+ fname, strerror(errno));
+ exit(1);
+ }
+ char line_buf[1024];
+ while (fgets(line_buf, sizeof(line_buf), fp)) {
+ size_t len = strlen(line_buf);
+ if (len > 1) { /* skip empty lines */
+ line_buf[len - 1] = '\0';
+ if (!trace_event_set_state(line_buf, true)) {
+ fprintf(stderr,
+ "error: trace event '%s' does not exist\n", line_buf);
+ exit(1);
+ }
+ }
+ }
+ if (fclose(fp) != 0) {
+ fprintf(stderr, "error: closing file '%s': %s\n",
+ fname, strerror(errno));
+ exit(1);
+ }
+}
diff --git a/trace/control.h b/trace/control.h
index c99b4d5..2acaa42 100644
--- a/trace/control.h
+++ b/trace/control.h
@@ -24,10 +24,18 @@ bool trace_event_set_state(const char *name, bool state);
/** Initialize the tracing backend.
*
- * @file Name of trace output file; may be NULL.
- * Corresponds to commandline option "-trace file=...".
+ * @events Name of file with events to be enabled at startup; may be NULL.
+ * Corresponds to commandline option "-trace events=...".
+ * @file Name of trace output file; may be NULL.
+ * Corresponds to commandline option "-trace file=...".
* @return Whether the backend could be successfully initialized.
*/
-bool trace_backend_init(const char *file);
+bool trace_backend_init(const char *events, const char *file);
+
+/** Generic function to initialize the state of events.
+ *
+ * @fname Name of file with events to enable; may be NULL.
+ */
+void trace_backend_init_events(const char *fname);
#endif /* TRACE_CONTROL_H */
diff --git a/trace/default.c b/trace/default.c
index 3573d5b..c9b27a2 100644
--- a/trace/default.c
+++ b/trace/default.c
@@ -25,8 +25,13 @@ bool trace_event_set_state(const char *name, bool state)
return false;
}
-bool trace_backend_init(const char *file)
+bool trace_backend_init(const char *events, const char *file)
{
+ if (events) {
+ fprintf(stderr, "error: -trace events=...: "
+ "option not supported by the selected tracing backend\n");
+ return false;
+ }
if (file) {
fprintf(stderr, "error: -trace file=...: "
"option not supported by the selected tracing backend\n");
diff --git a/trace/simple.c b/trace/simple.c
index 70689e9..a609368 100644
--- a/trace/simple.c
+++ b/trace/simple.c
@@ -331,7 +331,7 @@ bool trace_event_set_state(const char *name, bool state)
return false;
}
-bool trace_backend_init(const char *file)
+bool trace_backend_init(const char *events, const char *file)
{
pthread_t thread;
pthread_attr_t attr;
@@ -350,6 +350,7 @@ bool trace_backend_init(const char *file)
fprintf(stderr, "warning: unable to initialize simple trace backend\n");
} else {
atexit(st_flush_trace_buffer);
+ trace_backend_init_events(events);
st_set_trace_file(file);
}
diff --git a/vl.c b/vl.c
index 60322b6..c6dc689 100644
--- a/vl.c
+++ b/vl.c
@@ -2137,6 +2137,7 @@ int main(int argc, char **argv, char **envp)
.realloc = realloc_and_trace,
.free = free_and_trace,
};
+ const char *trace_events = NULL;
const char *trace_file = NULL;
atexit(qemu_run_exit_notifiers);
@@ -2934,6 +2935,7 @@ int main(int argc, char **argv, char **envp)
if (!opts) {
exit(1);
}
+ trace_events = qemu_opt_get(opts, "events");
trace_file = qemu_opt_get(opts, "file");
break;
}
@@ -2994,7 +2996,7 @@ int main(int argc, char **argv, char **envp)
set_cpu_log(log_mask);
}
- if (!trace_backend_init(trace_file)) {
+ if (!trace_backend_init(trace_events, trace_file)) {
exit(1);
}
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 11/14] trace-state: always use the "nop" backend on events with the "disable" keyword
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (9 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 10/14] trace-state: add "-trace events" argument to control initial state Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 12/14] trace-state: [simple] disable all trace points by default Lluís
` (3 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Any event with the keyword/property "disable" generates an empty trace event
using the "nop" backend, regardless of the current backend.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
docs/tracing.txt | 25 +++++++++++++++----------
scripts/tracetool | 15 ++-------------
2 files changed, 17 insertions(+), 23 deletions(-)
diff --git a/docs/tracing.txt b/docs/tracing.txt
index 455da37..85793cf 100644
--- a/docs/tracing.txt
+++ b/docs/tracing.txt
@@ -12,15 +12,11 @@ for debugging, profiling, and observing execution.
./configure --trace-backend=simple
make
-2. Enable trace events you are interested in:
-
- $EDITOR trace-events # remove "disable" from events you want
-
-3. Run the virtual machine to produce a trace file:
+2. Run the virtual machine to produce a trace file:
qemu ... # your normal QEMU invocation
-4. Pretty-print the binary trace file:
+3. Pretty-print the binary trace file:
./simpletrace.py trace-events trace-*
@@ -103,10 +99,11 @@ portability macros, ensure they are preceded and followed by double quotes:
4. Name trace events after their function. If there are multiple trace events
in one function, append a unique distinguisher at the end of the name.
-5. Declare trace events with the "disable" property. Some trace events can
- produce a lot of output and users are typically only interested in a subset
- of trace events. Marking trace events disabled by default saves the user
- from having to manually disable noisy trace events.
+5. If specific trace events are going to be called a huge number of times, this
+ might have a noticeable performance impact even when the trace events are
+ programmatically disabled. In this case you should declare the trace event
+ with the "disable" property, which will effectively disable it at compile
+ time (using the "nop" backend).
== Generic interface and monitor commands ==
@@ -165,6 +162,9 @@ The "nop" backend generates empty trace event functions so that the compiler
can optimize out trace events completely. This is the default and imposes no
performance penalty.
+Note that regardless of the selected trace backend, events with the "disable"
+property will be generated with the "nop" backend.
+
=== Stderr ===
The "stderr" backend sends trace events directly to standard error. This
@@ -173,6 +173,11 @@ effectively turns trace events into debug printfs.
This is the simplest backend and can be used together with existing code that
uses DPRINTF().
+Note that with this backend trace events cannot be programmatically
+enabled/disabled. Thus, in order to trim down the amount of output and the
+performance impact of tracing, you might want to add the "disable" property in
+the "trace-events" file for those events you are not interested in.
+
=== Simpletrace ===
The "simple" backend supports common use cases and comes as part of the QEMU
diff --git a/scripts/tracetool b/scripts/tracetool
index e649a5b..e2cf117 100755
--- a/scripts/tracetool
+++ b/scripts/tracetool
@@ -506,21 +506,10 @@ convert()
# Skip comments and empty lines
test -z "${str%%#*}" && continue
+ echo
# Process the line. The nop backend handles disabled lines.
- disable="0"
if has_property "$str" "disable"; then
- disable="1"
- fi
- echo
- if [ "$disable" = "1" ]; then
- # Pass the disabled state as an arg for the simple
- # or DTrace backends which handle it dynamically.
- # For all other backends, call lineto$1_nop()
- if [ $backend = "simple" -o "$backend" = "dtrace" ]; then
- "$process_line" "$str"
- else
- "lineto$1_nop" "${str##disable }"
- fi
+ "lineto$1_nop" "$str"
else
"$process_line" "$str"
fi
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 12/14] trace-state: [simple] disable all trace points by default
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (10 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 11/14] trace-state: always use the "nop" backend on events with the "disable" keyword Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 13/14] trace-state: [stderr] add support for dynamically enabling/disabling events Lluís
` (2 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Note that this refers to the backend-specific state (whether the output must be
generated), not the event "disabled" property (which always uses the "nop"
backend).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
docs/tracing.txt | 11 ++++++++---
scripts/tracetool | 9 ++-------
trace-events | 3 ---
3 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/docs/tracing.txt b/docs/tracing.txt
index 85793cf..d1d4e8c 100644
--- a/docs/tracing.txt
+++ b/docs/tracing.txt
@@ -12,11 +12,16 @@ for debugging, profiling, and observing execution.
./configure --trace-backend=simple
make
-2. Run the virtual machine to produce a trace file:
+2. Create a file with the events you want to trace:
- qemu ... # your normal QEMU invocation
+ echo bdrv_aio_readv > /tmp/events
+ echo bdrv_aio_writev >> /tmp/events
-3. Pretty-print the binary trace file:
+3. Run the virtual machine to produce a trace file:
+
+ qemu -trace events=/tmp/events ... # your normal QEMU invocation
+
+4. Pretty-print the binary trace file:
./simpletrace.py trace-events trace-*
diff --git a/scripts/tracetool b/scripts/tracetool
index e2cf117..c740080 100755
--- a/scripts/tracetool
+++ b/scripts/tracetool
@@ -221,15 +221,10 @@ EOF
linetoc_simple()
{
- local name state
+ local name
name=$(get_name "$1")
- if has_property "$1" "disable"; then
- state="0"
- else
- state="1"
- fi
cat <<EOF
-{.tp_name = "$name", .state=$state},
+{.tp_name = "$name", .state=0},
EOF
simple_event_num=$((simple_event_num + 1))
}
diff --git a/trace-events b/trace-events
index f08d6d0..eb612e8 100644
--- a/trace-events
+++ b/trace-events
@@ -17,9 +17,6 @@
# Example: qemu_malloc(size_t size) "size %zu"
#
# The "disable" keyword will build without the trace event.
-# In case of 'simple' trace backend, it will allow the trace event to be
-# compiled, but this would be turned off by default. It can be toggled on via
-# the monitor.
#
# The <name> must be a valid as a C function name.
#
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 13/14] trace-state: [stderr] add support for dynamically enabling/disabling events
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (11 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 12/14] trace-state: [simple] disable all trace points by default Lluís
@ 2011-08-31 18:31 ` Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 14/14] trace: enable all events Lluís
2011-09-01 8:04 ` [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Stefan Hajnoczi
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Uses the generic interface provided in "trace/control.h" in order to provide
a programmatic interface as well as command line and monitor controls.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
Makefile.objs | 2 ++
configure | 1 +
docs/tracing.txt | 5 -----
qemu-options.hx | 3 ++-
scripts/tracetool | 33 ++++++++++++++++++++++++++++-----
trace/stderr.c | 37 +++++++++++++++++++++++++++++++++++++
trace/stderr.h | 11 +++++++++++
7 files changed, 81 insertions(+), 11 deletions(-)
create mode 100644 trace/stderr.c
create mode 100644 trace/stderr.h
diff --git a/Makefile.objs b/Makefile.objs
index 036a4eb..26b885b 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -384,6 +384,8 @@ trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
+trace-nested-$(CONFIG_TRACE_STDERR) += stderr.o
+
trace-nested-y += control.o
trace-obj-y += $(addprefix trace/, $(trace-nested-y))
diff --git a/configure b/configure
index f38847a..4d22470 100755
--- a/configure
+++ b/configure
@@ -3078,6 +3078,7 @@ if test "$trace_backend" = "simple"; then
fi
if test "$trace_backend" = "stderr"; then
echo "CONFIG_TRACE_STDERR=y" >> $config_host_mak
+ trace_default=no
fi
if test "$trace_backend" = "ust"; then
echo "CONFIG_TRACE_UST=y" >> $config_host_mak
diff --git a/docs/tracing.txt b/docs/tracing.txt
index d1d4e8c..4b27ab0 100644
--- a/docs/tracing.txt
+++ b/docs/tracing.txt
@@ -178,11 +178,6 @@ effectively turns trace events into debug printfs.
This is the simplest backend and can be used together with existing code that
uses DPRINTF().
-Note that with this backend trace events cannot be programmatically
-enabled/disabled. Thus, in order to trim down the amount of output and the
-performance impact of tracing, you might want to add the "disable" property in
-the "trace-events" file for those events you are not interested in.
-
=== Simpletrace ===
The "simple" backend supports common use cases and comes as part of the QEMU
diff --git a/qemu-options.hx b/qemu-options.hx
index edd181b..f672365 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2454,7 +2454,8 @@ Immediately enable events listed in @var{file}.
The file must contain one event name (as listed in the @var{trace-events} file)
per line.
-This option is only available when using the @var{simple} tracing backend.
+This option is only available when using the @var{simple} and @var{stderr}
+tracing backends.
@item file=@var{file}
Log output traces to @var{file}.
diff --git a/scripts/tracetool b/scripts/tracetool
index c740080..743d246 100755
--- a/scripts/tracetool
+++ b/scripts/tracetool
@@ -241,7 +241,12 @@ linetoh_begin_stderr()
{
cat <<EOF
#include <stdio.h>
+#include "trace/stderr.h"
+
+extern TraceEvent trace_list[];
EOF
+
+ stderr_event_num=0
}
linetoh_stderr()
@@ -260,29 +265,47 @@ linetoh_stderr()
cat <<EOF
static inline void trace_$name($args)
{
- fprintf(stderr, "$name $fmt\n" $argnames);
+ if (trace_list[$stderr_event_num].state != 0) {
+ fprintf(stderr, "$name $fmt\n" $argnames);
+ }
}
EOF
+ stderr_event_num=$((stderr_event_num + 1))
+
}
linetoh_end_stderr()
{
-return
+ cat <<EOF
+#define NR_TRACE_EVENTS $stderr_event_num
+EOF
}
linetoc_begin_stderr()
{
-return
+ cat <<EOF
+#include "trace.h"
+
+TraceEvent trace_list[] = {
+EOF
+ stderr_event_num=0
}
linetoc_stderr()
{
-return
+ local name
+ name=$(get_name "$1")
+ cat <<EOF
+{.tp_name = "$name", .state=0},
+EOF
+ stderr_event_num=$(($stderr_event_num + 1))
}
linetoc_end_stderr()
{
-return
+ cat <<EOF
+};
+EOF
}
#END OF STDERR
diff --git a/trace/stderr.c b/trace/stderr.c
new file mode 100644
index 0000000..7107c4a
--- /dev/null
+++ b/trace/stderr.c
@@ -0,0 +1,37 @@
+#include "trace.h"
+#include "trace/control.h"
+
+
+void trace_print_events(FILE *stream, fprintf_function stream_printf)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_TRACE_EVENTS; i++) {
+ stream_printf(stream, "%s [Event ID %u] : state %u\n",
+ trace_list[i].tp_name, i, trace_list[i].state);
+ }
+}
+
+bool trace_event_set_state(const char *name, bool state)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_TRACE_EVENTS; i++) {
+ if (!strcmp(trace_list[i].tp_name, name)) {
+ trace_list[i].state = state;
+ return true;
+ }
+ }
+ return false;
+}
+
+bool trace_backend_init(const char *events, const char *file)
+{
+ if (file) {
+ fprintf(stderr, "error: -trace file=...: "
+ "option not supported by the selected tracing backend\n");
+ return false;
+ }
+ trace_backend_init_events(events);
+ return true;
+}
diff --git a/trace/stderr.h b/trace/stderr.h
new file mode 100644
index 0000000..d575b61
--- /dev/null
+++ b/trace/stderr.h
@@ -0,0 +1,11 @@
+#ifndef TRACE_STDERR_H
+#define TRACE_STDERR_H
+
+typedef uint64_t TraceEventID;
+
+typedef struct {
+ const char *tp_name;
+ bool state;
+} TraceEvent;
+
+#endif /* ! TRACE_STDERR_H */
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v9 14/14] trace: enable all events
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (12 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 13/14] trace-state: [stderr] add support for dynamically enabling/disabling events Lluís
@ 2011-08-31 18:31 ` Lluís
2011-09-01 8:04 ` [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Stefan Hajnoczi
14 siblings, 0 replies; 16+ messages in thread
From: Lluís @ 2011-08-31 18:31 UTC (permalink / raw)
To: qemu-devel, chouteau; +Cc: stefanha
Given that all events with programmatically-controlled state are disabled by
default, we can delete the "disable" property from all events.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
trace-events | 648 +++++++++++++++++++++++++++++-----------------------------
1 files changed, 324 insertions(+), 324 deletions(-)
diff --git a/trace-events b/trace-events
index eb612e8..98f3ec2 100644
--- a/trace-events
+++ b/trace-events
@@ -26,439 +26,439 @@
# The <format-string> should be a sprintf()-compatible format string.
# qemu-malloc.c
-disable qemu_malloc(size_t size, void *ptr) "size %zu ptr %p"
-disable qemu_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p"
-disable qemu_free(void *ptr) "ptr %p"
+qemu_malloc(size_t size, void *ptr) "size %zu ptr %p"
+qemu_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p"
+qemu_free(void *ptr) "ptr %p"
# osdep.c
-disable qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p"
-disable qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p"
-disable qemu_vfree(void *ptr) "ptr %p"
+qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p"
+qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p"
+qemu_vfree(void *ptr) "ptr %p"
# hw/virtio.c
-disable virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u"
-disable virtqueue_flush(void *vq, unsigned int count) "vq %p count %u"
-disable virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u"
-disable virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p"
-disable virtio_irq(void *vq) "vq %p"
-disable virtio_notify(void *vdev, void *vq) "vdev %p vq %p"
+virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u"
+virtqueue_flush(void *vq, unsigned int count) "vq %p count %u"
+virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u"
+virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p"
+virtio_irq(void *vq) "vq %p"
+virtio_notify(void *vdev, void *vq) "vdev %p vq %p"
# hw/virtio-serial-bus.c
-disable virtio_serial_send_control_event(unsigned int port, uint16_t event, uint16_t value) "port %u, event %u, value %u"
-disable virtio_serial_throttle_port(unsigned int port, bool throttle) "port %u, throttle %d"
-disable virtio_serial_handle_control_message(uint16_t event, uint16_t value) "event %u, value %u"
-disable virtio_serial_handle_control_message_port(unsigned int port) "port %u"
+virtio_serial_send_control_event(unsigned int port, uint16_t event, uint16_t value) "port %u, event %u, value %u"
+virtio_serial_throttle_port(unsigned int port, bool throttle) "port %u, throttle %d"
+virtio_serial_handle_control_message(uint16_t event, uint16_t value) "event %u, value %u"
+virtio_serial_handle_control_message_port(unsigned int port) "port %u"
# hw/virtio-console.c
-disable virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, in_len %zu, out_len %zd"
-disable virtio_console_chr_read(unsigned int port, int size) "port %u, size %d"
-disable virtio_console_chr_event(unsigned int port, int event) "port %u, event %d"
+virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, in_len %zu, out_len %zd"
+virtio_console_chr_read(unsigned int port, int size) "port %u, size %d"
+virtio_console_chr_event(unsigned int port, int event) "port %u, event %d"
# block.c
-disable multiwrite_cb(void *mcb, int ret) "mcb %p ret %d"
-disable bdrv_aio_multiwrite(void *mcb, int num_callbacks, int num_reqs) "mcb %p num_callbacks %d num_reqs %d"
-disable bdrv_aio_multiwrite_earlyfail(void *mcb) "mcb %p"
-disable bdrv_aio_multiwrite_latefail(void *mcb, int i) "mcb %p i %d"
-disable bdrv_aio_flush(void *bs, void *opaque) "bs %p opaque %p"
-disable bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
-disable bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
-disable bdrv_set_locked(void *bs, int locked) "bs %p locked %d"
-disable bdrv_co_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
-disable bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
-disable bdrv_co_io(int is_write, void *acb) "is_write %d acb %p"
+multiwrite_cb(void *mcb, int ret) "mcb %p ret %d"
+bdrv_aio_multiwrite(void *mcb, int num_callbacks, int num_reqs) "mcb %p num_callbacks %d num_reqs %d"
+bdrv_aio_multiwrite_earlyfail(void *mcb) "mcb %p"
+bdrv_aio_multiwrite_latefail(void *mcb, int i) "mcb %p i %d"
+bdrv_aio_flush(void *bs, void *opaque) "bs %p opaque %p"
+bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
+bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
+bdrv_set_locked(void *bs, int locked) "bs %p locked %d"
+bdrv_co_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
+bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
+bdrv_co_io(int is_write, void *acb) "is_write %d acb %p"
# hw/virtio-blk.c
-disable virtio_blk_req_complete(void *req, int status) "req %p status %d"
-disable virtio_blk_rw_complete(void *req, int ret) "req %p ret %d"
-disable virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu"
+virtio_blk_req_complete(void *req, int status) "req %p status %d"
+virtio_blk_rw_complete(void *req, int ret) "req %p ret %d"
+virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu"
# posix-aio-compat.c
-disable paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d"
-disable paio_complete(void *acb, void *opaque, int ret) "acb %p opaque %p ret %d"
-disable paio_cancel(void *acb, void *opaque) "acb %p opaque %p"
+paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d"
+paio_complete(void *acb, void *opaque, int ret) "acb %p opaque %p ret %d"
+paio_cancel(void *acb, void *opaque) "acb %p opaque %p"
# ioport.c
-disable cpu_in(unsigned int addr, unsigned int val) "addr %#x value %u"
-disable cpu_out(unsigned int addr, unsigned int val) "addr %#x value %u"
+cpu_in(unsigned int addr, unsigned int val) "addr %#x value %u"
+cpu_out(unsigned int addr, unsigned int val) "addr %#x value %u"
# balloon.c
# Since requests are raised via monitor, not many tracepoints are needed.
-disable balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu"
+balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu"
# hw/apic.c
-disable apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d"
-disable apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d trigger_mode %d"
-disable cpu_set_apic_base(uint64_t val) "%016"PRIx64""
-disable cpu_get_apic_base(uint64_t val) "%016"PRIx64""
-disable apic_mem_readl(uint64_t addr, uint32_t val) "%"PRIx64" = %08x"
-disable apic_mem_writel(uint64_t addr, uint32_t val) "%"PRIx64" = %08x"
+apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d"
+apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d trigger_mode %d"
+cpu_set_apic_base(uint64_t val) "%016"PRIx64""
+cpu_get_apic_base(uint64_t val) "%016"PRIx64""
+apic_mem_readl(uint64_t addr, uint32_t val) "%"PRIx64" = %08x"
+apic_mem_writel(uint64_t addr, uint32_t val) "%"PRIx64" = %08x"
# coalescing
-disable apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d"
-disable apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d"
-disable apic_set_irq(int apic_irq_delivered) "coalescing %d"
+apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d"
+apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d"
+apic_set_irq(int apic_irq_delivered) "coalescing %d"
# hw/cs4231.c
-disable cs4231_mem_readl_dreg(uint32_t reg, uint32_t ret) "read dreg %d: 0x%02x"
-disable cs4231_mem_readl_reg(uint32_t reg, uint32_t ret) "read reg %d: 0x%08x"
-disable cs4231_mem_writel_reg(uint32_t reg, uint32_t old, uint32_t val) "write reg %d: 0x%08x -> 0x%08x"
-disable cs4231_mem_writel_dreg(uint32_t reg, uint32_t old, uint32_t val) "write dreg %d: 0x%02x -> 0x%02x"
+cs4231_mem_readl_dreg(uint32_t reg, uint32_t ret) "read dreg %d: 0x%02x"
+cs4231_mem_readl_reg(uint32_t reg, uint32_t ret) "read reg %d: 0x%08x"
+cs4231_mem_writel_reg(uint32_t reg, uint32_t old, uint32_t val) "write reg %d: 0x%08x -> 0x%08x"
+cs4231_mem_writel_dreg(uint32_t reg, uint32_t old, uint32_t val) "write dreg %d: 0x%02x -> 0x%02x"
# hw/ds1225y.c
-disable nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x"
-disable nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x -> 0x%02x"
+nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x"
+nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x -> 0x%02x"
# hw/eccmemctl.c
-disable ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
-disable ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
-disable ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
-disable ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
-disable ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
-disable ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
-disable ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
-disable ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
-disable ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
-disable ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
-disable ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
-disable ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
-disable ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
-disable ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
-disable ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
-disable ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
-disable ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
-disable ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
+ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
+ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
+ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
+ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
+ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
+ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
+ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
+ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
+ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
+ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
+ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
+ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
+ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
+ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
+ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
+ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
+ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
+ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
# hw/lance.c
-disable lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x"
-disable lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x"
+lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x"
+lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x"
# hw/slavio_intctl.c
-disable slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = %x"
-disable slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = %x"
-disable slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask %x, curmask %x"
-disable slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask %x, curmask %x"
-disable slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = %x"
-disable slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = %x"
-disable slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask %x, curmask %x"
-disable slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask %x, curmask %x"
-disable slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d"
-disable slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending %x disabled %x"
-disable slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d"
-disable slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d"
+slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = %x"
+slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = %x"
+slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask %x, curmask %x"
+slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask %x, curmask %x"
+slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = %x"
+slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = %x"
+slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask %x, curmask %x"
+slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask %x, curmask %x"
+slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d"
+slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending %x disabled %x"
+slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d"
+slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d"
# hw/slavio_misc.c
-disable slavio_misc_update_irq_raise(void) "Raise IRQ"
-disable slavio_misc_update_irq_lower(void) "Lower IRQ"
-disable slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
-disable slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
-disable slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
-disable slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
-disable slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
-disable slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
-disable slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
-disable slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
-disable slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
-disable slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
-disable slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
-disable apc_mem_writeb(uint32_t val) "Write power management %02x"
-disable apc_mem_readb(uint32_t ret) "Read power management %02x"
-disable slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
-disable slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
-disable slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
-disable slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
+slavio_misc_update_irq_raise(void) "Raise IRQ"
+slavio_misc_update_irq_lower(void) "Lower IRQ"
+slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
+slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
+slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
+slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
+slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
+slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
+slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
+slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
+slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
+slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
+slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
+apc_mem_writeb(uint32_t val) "Write power management %02x"
+apc_mem_readb(uint32_t ret) "Read power management %02x"
+slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
+slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
+slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
+slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
# hw/slavio_timer.c
-disable slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x"
-disable slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x"
-disable slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64""
-disable slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x"
-disable slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x"
-disable slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64""
-disable slavio_timer_mem_writel_counter_invalid(void) "not user timer"
-disable slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started"
-disable slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped"
-disable slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer"
-disable slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter"
-disable slavio_timer_mem_writel_mode_invalid(void) "not system timer"
-disable slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64""
+slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x"
+slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x"
+slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64""
+slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x"
+slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x"
+slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64""
+slavio_timer_mem_writel_counter_invalid(void) "not user timer"
+slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started"
+slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped"
+slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer"
+slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter"
+slavio_timer_mem_writel_mode_invalid(void) "not system timer"
+slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64""
# hw/sparc32_dma.c
-disable ledma_memory_read(uint64_t addr) "DMA read addr 0x%"PRIx64""
-disable ledma_memory_write(uint64_t addr) "DMA write addr 0x%"PRIx64""
-disable sparc32_dma_set_irq_raise(void) "Raise IRQ"
-disable sparc32_dma_set_irq_lower(void) "Lower IRQ"
-disable espdma_memory_read(uint32_t addr) "DMA read addr 0x%08x"
-disable espdma_memory_write(uint32_t addr) "DMA write addr 0x%08x"
-disable sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg %"PRIx64": 0x%08x"
-disable sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg %"PRIx64": 0x%08x -> 0x%08x"
-disable sparc32_dma_enable_raise(void) "Raise DMA enable"
-disable sparc32_dma_enable_lower(void) "Lower DMA enable"
+ledma_memory_read(uint64_t addr) "DMA read addr 0x%"PRIx64""
+ledma_memory_write(uint64_t addr) "DMA write addr 0x%"PRIx64""
+sparc32_dma_set_irq_raise(void) "Raise IRQ"
+sparc32_dma_set_irq_lower(void) "Lower IRQ"
+espdma_memory_read(uint32_t addr) "DMA read addr 0x%08x"
+espdma_memory_write(uint32_t addr) "DMA write addr 0x%08x"
+sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg %"PRIx64": 0x%08x"
+sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg %"PRIx64": 0x%08x -> 0x%08x"
+sparc32_dma_enable_raise(void) "Raise DMA enable"
+sparc32_dma_enable_lower(void) "Lower DMA enable"
# hw/sun4m.c
-disable sun4m_cpu_interrupt(unsigned int level) "Set CPU IRQ %d"
-disable sun4m_cpu_reset_interrupt(unsigned int level) "Reset CPU IRQ %d"
-disable sun4m_cpu_set_irq_raise(int level) "Raise CPU IRQ %d"
-disable sun4m_cpu_set_irq_lower(int level) "Lower CPU IRQ %d"
+sun4m_cpu_interrupt(unsigned int level) "Set CPU IRQ %d"
+sun4m_cpu_reset_interrupt(unsigned int level) "Reset CPU IRQ %d"
+sun4m_cpu_set_irq_raise(int level) "Raise CPU IRQ %d"
+sun4m_cpu_set_irq_lower(int level) "Lower CPU IRQ %d"
# hw/sun4m_iommu.c
-disable sun4m_iommu_mem_readl(uint64_t addr, uint32_t ret) "read reg[%"PRIx64"] = %x"
-disable sun4m_iommu_mem_writel(uint64_t addr, uint32_t val) "write reg[%"PRIx64"] = %x"
-disable sun4m_iommu_mem_writel_ctrl(uint64_t iostart) "iostart = %"PRIx64""
-disable sun4m_iommu_mem_writel_tlbflush(uint32_t val) "tlb flush %x"
-disable sun4m_iommu_mem_writel_pgflush(uint32_t val) "page flush %x"
-disable sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags addr %"PRIx64" => pte %"PRIx64", *pte = %x"
-disable sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x"
-disable sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64""
+sun4m_iommu_mem_readl(uint64_t addr, uint32_t ret) "read reg[%"PRIx64"] = %x"
+sun4m_iommu_mem_writel(uint64_t addr, uint32_t val) "write reg[%"PRIx64"] = %x"
+sun4m_iommu_mem_writel_ctrl(uint64_t iostart) "iostart = %"PRIx64""
+sun4m_iommu_mem_writel_tlbflush(uint32_t val) "tlb flush %x"
+sun4m_iommu_mem_writel_pgflush(uint32_t val) "page flush %x"
+sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags addr %"PRIx64" => pte %"PRIx64", *pte = %x"
+sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x"
+sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64""
# hw/usb-ehci.c
-disable usb_ehci_reset(void) "=== RESET ==="
-disable usb_ehci_mmio_readl(uint32_t addr, const char *str, uint32_t val) "rd mmio %04x [%s] = %x"
-disable usb_ehci_mmio_writel(uint32_t addr, const char *str, uint32_t val) "wr mmio %04x [%s] = %x"
-disable usb_ehci_mmio_change(uint32_t addr, const char *str, uint32_t new, uint32_t old) "ch mmio %04x [%s] = %x (old: %x)"
-disable usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d"
-disable usb_ehci_state(const char *schedule, const char *state) "%s schedule %s"
-disable usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ %08x: next %08x qtds %08x,%08x,%08x"
-disable usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ %08x - rl %d, mplen %d, eps %d, ep %d, dev %d"
-disable usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ %08x - c %d, h %d, dtc %d, i %d"
-disable usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ %08x: next %08x altnext %08x"
-disable usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d"
-disable usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
-disable usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
-disable usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s"
-disable usb_ehci_port_detach(uint32_t port) "detach port #%d"
-disable usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
-disable usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d"
-disable usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
+usb_ehci_reset(void) "=== RESET ==="
+usb_ehci_mmio_readl(uint32_t addr, const char *str, uint32_t val) "rd mmio %04x [%s] = %x"
+usb_ehci_mmio_writel(uint32_t addr, const char *str, uint32_t val) "wr mmio %04x [%s] = %x"
+usb_ehci_mmio_change(uint32_t addr, const char *str, uint32_t new, uint32_t old) "ch mmio %04x [%s] = %x (old: %x)"
+usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d"
+usb_ehci_state(const char *schedule, const char *state) "%s schedule %s"
+usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ %08x: next %08x qtds %08x,%08x,%08x"
+usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ %08x - rl %d, mplen %d, eps %d, ep %d, dev %d"
+usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ %08x - c %d, h %d, dtc %d, i %d"
+usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ %08x: next %08x altnext %08x"
+usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d"
+usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
+usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
+usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s"
+usb_ehci_port_detach(uint32_t port) "detach port #%d"
+usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
+usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d"
+usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
# hw/usb-desc.c
-disable usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d"
-disable usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d"
-disable usb_desc_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
-disable usb_desc_other_speed_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
-disable usb_desc_string(int addr, int index, int len, int ret) "dev %d query string %d, len %d, ret %d"
-disable usb_set_addr(int addr) "dev %d"
-disable usb_set_config(int addr, int config, int ret) "dev %d, config %d, ret %d"
-disable usb_clear_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
-disable usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
+usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d"
+usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d"
+usb_desc_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
+usb_desc_other_speed_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
+usb_desc_string(int addr, int index, int len, int ret) "dev %d query string %d, len %d, ret %d"
+usb_set_addr(int addr) "dev %d"
+usb_set_config(int addr, int config, int ret) "dev %d, config %d, ret %d"
+usb_clear_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
+usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
# hw/scsi-bus.c
-disable scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
-disable scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
-disable scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
-disable scsi_req_continue(int target, int lun, int tag) "target %d lun %d tag %d"
-disable scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer) "target %d lun %d tag %d command %d dir %d length %d"
-disable scsi_req_parsed_lba(int target, int lun, int tag, int cmd, uint64_t lba) "target %d lun %d tag %d command %d lba %"PRIu64""
-disable scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d"
-disable scsi_req_build_sense(int target, int lun, int tag, int key, int asc, int ascq) "target %d lun %d tag %d key %#02x asc %#02x ascq %#02x"
-disable scsi_report_luns(int target, int lun, int tag) "target %d lun %d tag %d"
-disable scsi_inquiry(int target, int lun, int tag, int cdb1, int cdb2) "target %d lun %d tag %d page %#02x/%#02x"
-disable scsi_test_unit_ready(int target, int lun, int tag) "target %d lun %d tag %d"
-disable scsi_request_sense(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
+scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_req_continue(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer) "target %d lun %d tag %d command %d dir %d length %d"
+scsi_req_parsed_lba(int target, int lun, int tag, int cmd, uint64_t lba) "target %d lun %d tag %d command %d lba %"PRIu64""
+scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d"
+scsi_req_build_sense(int target, int lun, int tag, int key, int asc, int ascq) "target %d lun %d tag %d key %#02x asc %#02x ascq %#02x"
+scsi_report_luns(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_inquiry(int target, int lun, int tag, int cdb1, int cdb2) "target %d lun %d tag %d page %#02x/%#02x"
+scsi_test_unit_ready(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_request_sense(int target, int lun, int tag) "target %d lun %d tag %d"
# vl.c
-disable vm_state_notify(int running, int reason) "running %d reason %d"
+vm_state_notify(int running, int reason) "running %d reason %d"
# block/qed-l2-cache.c
-disable qed_alloc_l2_cache_entry(void *l2_cache, void *entry) "l2_cache %p entry %p"
-disable qed_unref_l2_cache_entry(void *entry, int ref) "entry %p ref %d"
-disable qed_find_l2_cache_entry(void *l2_cache, void *entry, uint64_t offset, int ref) "l2_cache %p entry %p offset %"PRIu64" ref %d"
+qed_alloc_l2_cache_entry(void *l2_cache, void *entry) "l2_cache %p entry %p"
+qed_unref_l2_cache_entry(void *entry, int ref) "entry %p ref %d"
+qed_find_l2_cache_entry(void *l2_cache, void *entry, uint64_t offset, int ref) "l2_cache %p entry %p offset %"PRIu64" ref %d"
# block/qed-table.c
-disable qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRIu64" table %p"
-disable qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d"
-disable qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u"
-disable qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d"
+qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRIu64" table %p"
+qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d"
+qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u"
+qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d"
# block/qed.c
-disable qed_need_check_timer_cb(void *s) "s %p"
-disable qed_start_need_check_timer(void *s) "s %p"
-disable qed_cancel_need_check_timer(void *s) "s %p"
-disable qed_aio_complete(void *s, void *acb, int ret) "s %p acb %p ret %d"
-disable qed_aio_setup(void *s, void *acb, int64_t sector_num, int nb_sectors, void *opaque, int is_write) "s %p acb %p sector_num %"PRId64" nb_sectors %d opaque %p is_write %d"
-disable qed_aio_next_io(void *s, void *acb, int ret, uint64_t cur_pos) "s %p acb %p ret %d cur_pos %"PRIu64""
-disable qed_aio_read_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
-disable qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
-disable qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64""
-disable qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64""
-disable qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
+qed_need_check_timer_cb(void *s) "s %p"
+qed_start_need_check_timer(void *s) "s %p"
+qed_cancel_need_check_timer(void *s) "s %p"
+qed_aio_complete(void *s, void *acb, int ret) "s %p acb %p ret %d"
+qed_aio_setup(void *s, void *acb, int64_t sector_num, int nb_sectors, void *opaque, int is_write) "s %p acb %p sector_num %"PRId64" nb_sectors %d opaque %p is_write %d"
+qed_aio_next_io(void *s, void *acb, int ret, uint64_t cur_pos) "s %p acb %p ret %d cur_pos %"PRIu64""
+qed_aio_read_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
+qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
+qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64""
+qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64""
+qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
# hw/g364fb.c
-disable g364fb_read(uint64_t addr, uint32_t val) "read addr=0x%"PRIx64": 0x%x"
-disable g364fb_write(uint64_t addr, uint32_t new) "write addr=0x%"PRIx64": 0x%x"
+g364fb_read(uint64_t addr, uint32_t val) "read addr=0x%"PRIx64": 0x%x"
+g364fb_write(uint64_t addr, uint32_t new) "write addr=0x%"PRIx64": 0x%x"
# hw/grlib_gptimer.c
-disable grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run"
-disable grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x"
-disable grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x"
-disable grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x"
-disable grlib_gptimer_hit(int id) "timer:%d HIT"
-disable grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
-disable grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
+grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run"
+grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x"
+grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x"
+grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x"
+grlib_gptimer_hit(int id) "timer:%d HIT"
+grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
+grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
# hw/grlib_irqmp.c
-disable grlib_irqmp_check_irqs(uint32_t pend, uint32_t force, uint32_t mask, uint32_t lvl1, uint32_t lvl2) "pend:0x%04x force:0x%04x mask:0x%04x lvl1:0x%04x lvl0:0x%04x\n"
-disable grlib_irqmp_ack(int intno) "interrupt:%d"
-disable grlib_irqmp_set_irq(int irq) "Raise CPU IRQ %d"
-disable grlib_irqmp_readl_unknown(uint64_t addr) "addr 0x%"PRIx64""
-disable grlib_irqmp_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
+grlib_irqmp_check_irqs(uint32_t pend, uint32_t force, uint32_t mask, uint32_t lvl1, uint32_t lvl2) "pend:0x%04x force:0x%04x mask:0x%04x lvl1:0x%04x lvl0:0x%04x\n"
+grlib_irqmp_ack(int intno) "interrupt:%d"
+grlib_irqmp_set_irq(int irq) "Raise CPU IRQ %d"
+grlib_irqmp_readl_unknown(uint64_t addr) "addr 0x%"PRIx64""
+grlib_irqmp_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
# hw/grlib_apbuart.c
-disable grlib_apbuart_event(int event) "event:%d"
-disable grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
+grlib_apbuart_event(int event) "event:%d"
+grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
# hw/leon3.c
-disable leon3_set_irq(int intno) "Set CPU IRQ %d"
-disable leon3_reset_irq(int intno) "Reset CPU IRQ %d"
+leon3_set_irq(int intno) "Set CPU IRQ %d"
+leon3_reset_irq(int intno) "Reset CPU IRQ %d"
# spice-qemu-char.c
-disable spice_vmc_write(ssize_t out, int len) "spice wrottn %zd of requested %d"
-disable spice_vmc_read(int bytes, int len) "spice read %d of requested %d"
-disable spice_vmc_register_interface(void *scd) "spice vmc registered interface %p"
-disable spice_vmc_unregister_interface(void *scd) "spice vmc unregistered interface %p"
+spice_vmc_write(ssize_t out, int len) "spice wrottn %zd of requested %d"
+spice_vmc_read(int bytes, int len) "spice read %d of requested %d"
+spice_vmc_register_interface(void *scd) "spice vmc registered interface %p"
+spice_vmc_unregister_interface(void *scd) "spice vmc unregistered interface %p"
# hw/lm32_pic.c
-disable lm32_pic_raise_irq(void) "Raise CPU interrupt"
-disable lm32_pic_lower_irq(void) "Lower CPU interrupt"
-disable lm32_pic_interrupt(int irq, int level) "Set IRQ%d %d"
-disable lm32_pic_set_im(uint32_t im) "im 0x%08x"
-disable lm32_pic_set_ip(uint32_t ip) "ip 0x%08x"
-disable lm32_pic_get_im(uint32_t im) "im 0x%08x"
-disable lm32_pic_get_ip(uint32_t ip) "ip 0x%08x"
+lm32_pic_raise_irq(void) "Raise CPU interrupt"
+lm32_pic_lower_irq(void) "Lower CPU interrupt"
+lm32_pic_interrupt(int irq, int level) "Set IRQ%d %d"
+lm32_pic_set_im(uint32_t im) "im 0x%08x"
+lm32_pic_set_ip(uint32_t ip) "ip 0x%08x"
+lm32_pic_get_im(uint32_t im) "im 0x%08x"
+lm32_pic_get_ip(uint32_t ip) "ip 0x%08x"
# hw/lm32_juart.c
-disable lm32_juart_get_jtx(uint32_t value) "jtx 0x%08x"
-disable lm32_juart_set_jtx(uint32_t value) "jtx 0x%08x"
-disable lm32_juart_get_jrx(uint32_t value) "jrx 0x%08x"
-disable lm32_juart_set_jrx(uint32_t value) "jrx 0x%08x"
+lm32_juart_get_jtx(uint32_t value) "jtx 0x%08x"
+lm32_juart_set_jtx(uint32_t value) "jtx 0x%08x"
+lm32_juart_get_jrx(uint32_t value) "jrx 0x%08x"
+lm32_juart_set_jrx(uint32_t value) "jrx 0x%08x"
# hw/lm32_timer.c
-disable lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
-disable lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
-disable lm32_timer_hit(void) "timer hit"
-disable lm32_timer_irq_state(int level) "irq state %d"
+lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+lm32_timer_hit(void) "timer hit"
+lm32_timer_irq_state(int level) "irq state %d"
# hw/lm32_uart.c
-disable lm32_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
-disable lm32_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
-disable lm32_uart_irq_state(int level) "irq state %d"
+lm32_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+lm32_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+lm32_uart_irq_state(int level) "irq state %d"
# hw/lm32_sys.c
-disable lm32_sys_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+lm32_sys_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
# hw/milkymist-ac97.c
-disable milkymist_ac97_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_ac97_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_ac97_pulse_irq_crrequest(void) "Pulse IRQ CR request"
-disable milkymist_ac97_pulse_irq_crreply(void) "Pulse IRQ CR reply"
-disable milkymist_ac97_pulse_irq_dmaw(void) "Pulse IRQ DMA write"
-disable milkymist_ac97_pulse_irq_dmar(void) "Pulse IRQ DMA read"
-disable milkymist_ac97_in_cb(int avail, uint32_t remaining) "avail %d remaining %u"
-disable milkymist_ac97_in_cb_transferred(int transferred) "transferred %d"
-disable milkymist_ac97_out_cb(int free, uint32_t remaining) "free %d remaining %u"
-disable milkymist_ac97_out_cb_transferred(int transferred) "transferred %d"
+milkymist_ac97_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_ac97_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_ac97_pulse_irq_crrequest(void) "Pulse IRQ CR request"
+milkymist_ac97_pulse_irq_crreply(void) "Pulse IRQ CR reply"
+milkymist_ac97_pulse_irq_dmaw(void) "Pulse IRQ DMA write"
+milkymist_ac97_pulse_irq_dmar(void) "Pulse IRQ DMA read"
+milkymist_ac97_in_cb(int avail, uint32_t remaining) "avail %d remaining %u"
+milkymist_ac97_in_cb_transferred(int transferred) "transferred %d"
+milkymist_ac97_out_cb(int free, uint32_t remaining) "free %d remaining %u"
+milkymist_ac97_out_cb_transferred(int transferred) "transferred %d"
# hw/milkymist-hpdmc.c
-disable milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
-disable milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
+milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
+milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
# hw/milkymist-memcard.c
-disable milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
# hw/milkymist-minimac2.c
-disable milkymist_minimac2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_minimac2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_minimac2_mdio_write(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x"
-disable milkymist_minimac2_mdio_read(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x"
-disable milkymist_minimac2_tx_frame(uint32_t length) "length %u"
-disable milkymist_minimac2_rx_frame(const void *buf, uint32_t length) "buf %p length %u"
-disable milkymist_minimac2_drop_rx_frame(const void *buf) "buf %p"
-disable milkymist_minimac2_rx_transfer(const void *buf, uint32_t length) "buf %p length %d"
-disable milkymist_minimac2_raise_irq_rx(void) "Raise IRQ RX"
-disable milkymist_minimac2_lower_irq_rx(void) "Lower IRQ RX"
-disable milkymist_minimac2_pulse_irq_tx(void) "Pulse IRQ TX"
+milkymist_minimac2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_minimac2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_minimac2_mdio_write(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x"
+milkymist_minimac2_mdio_read(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x"
+milkymist_minimac2_tx_frame(uint32_t length) "length %u"
+milkymist_minimac2_rx_frame(const void *buf, uint32_t length) "buf %p length %u"
+milkymist_minimac2_drop_rx_frame(const void *buf) "buf %p"
+milkymist_minimac2_rx_transfer(const void *buf, uint32_t length) "buf %p length %d"
+milkymist_minimac2_raise_irq_rx(void) "Raise IRQ RX"
+milkymist_minimac2_lower_irq_rx(void) "Lower IRQ RX"
+milkymist_minimac2_pulse_irq_tx(void) "Pulse IRQ TX"
# hw/milkymist-pfpu.c
-disable milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x"
-disable milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
+milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x"
+milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
# hw/milkymist-softusb.c
-disable milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_softusb_mevt(uint8_t m) "m %d"
-disable milkymist_softusb_kevt(uint8_t m) "m %d"
-disable milkymist_softusb_mouse_event(int dx, int dy, int dz, int bs) "dx %d dy %d dz %d bs %02x"
-disable milkymist_softusb_pulse_irq(void) "Pulse IRQ"
+milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_softusb_mevt(uint8_t m) "m %d"
+milkymist_softusb_kevt(uint8_t m) "m %d"
+milkymist_softusb_mouse_event(int dx, int dy, int dz, int bs) "dx %d dy %d dz %d bs %02x"
+milkymist_softusb_pulse_irq(void) "Pulse IRQ"
# hw/milkymist-sysctl.c
-disable milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_sysctl_icap_write(uint32_t value) "value %08x"
-disable milkymist_sysctl_start_timer0(void) "Start timer0"
-disable milkymist_sysctl_stop_timer0(void) "Stop timer0"
-disable milkymist_sysctl_start_timer1(void) "Start timer1"
-disable milkymist_sysctl_stop_timer1(void) "Stop timer1"
-disable milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0"
-disable milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1"
+milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_sysctl_icap_write(uint32_t value) "value %08x"
+milkymist_sysctl_start_timer0(void) "Start timer0"
+milkymist_sysctl_stop_timer0(void) "Stop timer0"
+milkymist_sysctl_start_timer1(void) "Start timer1"
+milkymist_sysctl_stop_timer1(void) "Stop timer1"
+milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0"
+milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1"
# hw/milkymist-tmu2.c
-disable milkymist_tmu2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_tmu2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_tmu2_start(void) "Start TMU"
-disable milkymist_tmu2_pulse_irq(void) "Pulse IRQ"
+milkymist_tmu2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_tmu2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_tmu2_start(void) "Start TMU"
+milkymist_tmu2_pulse_irq(void) "Pulse IRQ"
# hw/milkymist-uart.c
-disable milkymist_uart_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_uart_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_uart_pulse_irq_rx(void) "Pulse IRQ RX"
-disable milkymist_uart_pulse_irq_tx(void) "Pulse IRQ TX"
+milkymist_uart_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_uart_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_uart_pulse_irq_rx(void) "Pulse IRQ RX"
+milkymist_uart_pulse_irq_tx(void) "Pulse IRQ TX"
# hw/milkymist-vgafb.c
-disable milkymist_vgafb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
-disable milkymist_vgafb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_vgafb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
+milkymist_vgafb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
# xen-all.c
-disable xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx"
-disable xen_client_set_memory(uint64_t start_addr, unsigned long size, unsigned long phys_offset, bool log_dirty) "%#"PRIx64" size %#lx, offset %#lx, log_dirty %i"
+xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx"
+xen_client_set_memory(uint64_t start_addr, unsigned long size, unsigned long phys_offset, bool log_dirty) "%#"PRIx64" size %#lx, offset %#lx, log_dirty %i"
# xen-mapcache.c
-disable xen_map_cache(uint64_t phys_addr) "want %#"PRIx64""
-disable xen_remap_bucket(uint64_t index) "index %#"PRIx64""
-disable xen_map_cache_return(void* ptr) "%p"
-disable xen_map_block(uint64_t phys_addr, uint64_t size) "%#"PRIx64", size %#"PRIx64""
-disable xen_unmap_block(void* addr, unsigned long size) "%p, size %#lx"
+xen_map_cache(uint64_t phys_addr) "want %#"PRIx64""
+xen_remap_bucket(uint64_t index) "index %#"PRIx64""
+xen_map_cache_return(void* ptr) "%p"
+xen_map_block(uint64_t phys_addr, uint64_t size) "%#"PRIx64", size %#"PRIx64""
+xen_unmap_block(void* addr, unsigned long size) "%p, size %#lx"
# exec.c
-disable qemu_put_ram_ptr(void* addr) "%p"
+qemu_put_ram_ptr(void* addr) "%p"
# hw/xen_platform.c
-disable xen_platform_log(char *s) "xen platform: %s"
+xen_platform_log(char *s) "xen platform: %s"
# qemu-coroutine.c
-disable qemu_coroutine_enter(void *from, void *to, void *opaque) "from %p to %p opaque %p"
-disable qemu_coroutine_yield(void *from, void *to) "from %p to %p"
-disable qemu_coroutine_terminate(void *co) "self %p"
+qemu_coroutine_enter(void *from, void *to, void *opaque) "from %p to %p opaque %p"
+qemu_coroutine_yield(void *from, void *to) "from %p to %p"
+qemu_coroutine_terminate(void *co) "self %p"
# qemu-coroutine-lock.c
-disable qemu_co_queue_next_bh(void) ""
-disable qemu_co_queue_next(void *next) "next %p"
-disable qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p"
-disable qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p"
-disable qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p"
-disable qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
+qemu_co_queue_next_bh(void) ""
+qemu_co_queue_next(void *next) "next %p"
+qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p"
+qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p"
+qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p"
+qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
# hw/escc.c
-disable escc_put_queue(char channel, int b) "channel %c put: 0x%02x"
-disable escc_get_queue(char channel, int val) "channel %c get 0x%02x"
-disable escc_update_irq(int irq) "IRQ = %d"
-disable escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d"
-disable escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = %2.2x"
-disable escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d"
-disable escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = %2.2x"
-disable escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d"
-disable escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d"
-disable escc_sunkbd_event_in(int ch) "Untranslated keycode %2.2x"
-disable escc_sunkbd_event_out(int ch) "Translated keycode %2.2x"
-disable escc_kbd_command(int val) "Command %d"
-disable escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=%01x"
+escc_put_queue(char channel, int b) "channel %c put: 0x%02x"
+escc_get_queue(char channel, int val) "channel %c get 0x%02x"
+escc_update_irq(int irq) "IRQ = %d"
+escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d"
+escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = %2.2x"
+escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d"
+escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = %2.2x"
+escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d"
+escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d"
+escc_sunkbd_event_in(int ch) "Untranslated keycode %2.2x"
+escc_sunkbd_event_out(int ch) "Translated keycode %2.2x"
+escc_kbd_command(int val) "Command %d"
+escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=%01x"
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
` (13 preceding siblings ...)
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 14/14] trace: enable all events Lluís
@ 2011-09-01 8:04 ` Stefan Hajnoczi
14 siblings, 0 replies; 16+ messages in thread
From: Stefan Hajnoczi @ 2011-09-01 8:04 UTC (permalink / raw)
To: Lluís; +Cc: qemu-devel, chouteau
On Wed, Aug 31, 2011 at 7:30 PM, Lluís <xscript@gmx.net> wrote:
> This patch defines the "disable" trace event state to always use the "nop"
> backend.
>
> As a side-effect, all events are now enabled (without "disable") by default, as
> all backends (except "stderr") have programmatic support for dynamically
> (de)activating each trace event.
>
> In order to make this true, the "simple" backend now has a "-trace
> events=<file>" argument to let the user select which events must be enabled from
> the very beginning.
>
> NOTES:
> * Parsing of -trace arguments is not done in the OS-specific frontends.
>
> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
> ---
>
> Changes in v9:
>
> * Initialize "trace_file" and "trace_events" in "vl.c".
> * Remove "disable" property in events from "hw/g364fb.c"
Thanks for your work! I have merged v9 into the tracing tree with a
tiny fix to make dtrace/systemtap build:
http://repo.or.cz/w/qemu/stefanha.git/shortlog/refs/heads/tracing
Stefan
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2011-09-01 8:04 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-31 18:30 [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 01/14] build: Fix linkage of QEMU_PROG Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 02/14] build: [simple] Include qemu-timer-common.o in trace-obj-y Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 03/14] trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_* Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 04/14] trace: [make] replace 'ifeq' with values in CONFIG_TRACE_* Lluís
2011-08-31 18:30 ` [Qemu-devel] [PATCH v9 05/14] trace: move backend-specific code into the trace/ directory Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 06/14] trace: avoid conditional code compilation during option parsing Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 07/14] trace: generalize the "property" concept in the trace-events file Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 08/14] trace-state: separate trace event control and query routines from the simple backend Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 09/14] trace-state: always compile support for controlling and querying trace event states Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 10/14] trace-state: add "-trace events" argument to control initial state Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 11/14] trace-state: always use the "nop" backend on events with the "disable" keyword Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 12/14] trace-state: [simple] disable all trace points by default Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 13/14] trace-state: [stderr] add support for dynamically enabling/disabling events Lluís
2011-08-31 18:31 ` [Qemu-devel] [PATCH v9 14/14] trace: enable all events Lluís
2011-09-01 8:04 ` [Qemu-devel] [PATCH v9 00/14] trace-state: make the behaviour of "disable" consistent across all backends Stefan Hajnoczi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.