* error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR
@ 2018-03-01 10:21 Abhishekh Awanti
2018-03-01 11:07 ` Burton, Ross
2018-03-02 5:55 ` Khem Raj
0 siblings, 2 replies; 7+ messages in thread
From: Abhishekh Awanti @ 2018-03-01 10:21 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 5825 bytes --]
Hi,
I am trying to build the package "*harfbuzz-1.3.0" , *but i am getting the
following configure error
*Build Configuration:*
*BB_VERSION = "1.22.0"*
*BUILD_SYS = "x86_64-linux"*
*NATIVELSBSTRING = "Ubuntu-14.04"*
*TARGET_SYS = "arm-poky-linux-gnueabi"*
*MACHINE = "iwg21m"*
*DISTRO = "poky"*
*DISTRO_VERSION = "1.6.1"*
*TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa15"*
*TARGET_FPU = "vfp-neon"*
*meta *
*meta-yocto *
*meta-yocto-bsp = "hmi_tmp:9febda430a88ba23b539394e5d54b59ae87405f6"*
*meta-renesas *
*meta-rzg1 = "master:2ea602f03b9c2378c1d7dc28675a675d18edb0e3"*
*meta-oe *
*meta-multimedia *
*meta-networking = "hmi_tmp:dca466c074c9a35bc0133e7e0d65cca0731e2acf"*
*meta-linaro-toolchain =
"hmi_build:8a0601723c06fdb75e62aa0f0cf15fc9d7d90167"*
*common *
*hmi-demo = "master:2cdb73bb902ecd4462cd0a4a66d5d116d0f7c113"*
*meta-ndvr = "<unknown>:<unknown>"*
*NOTE: Preparing runqueue*
*NOTE: Executing SetScene Tasks*
*NOTE: Executing RunQueue Tasks*
*ERROR: Function failed: do_configure (log file is located at
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
*ERROR: Logfile of failure stored in:
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451*
*Log data follows:*
*| DEBUG: Executing python function sysroot_cleansstate*
*| DEBUG: Python function sysroot_cleansstate finished*
*| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']*
*| DEBUG: Executing shell function autotools_preconfigure*
*| DEBUG: Shell function autotools_preconfigure finished*
*| DEBUG: Executing python function autotools_copy_aclocals*
*| DEBUG: Python function autotools_copy_aclocals finished*
*| DEBUG: Executing shell function do_configure*
*| automake (GNU automake) 1.14*
*| Copyright (C) 2013 Free Software Foundation, Inc.*
*| License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl-2.0.html
<http://gnu.org/licenses/gpl-2.0.html>>*
*| This is free software: you are free to change and redistribute it.*
*| There is NO WARRANTY, to the extent permitted by law.*
*| *
*| Written by Tom Tromey <tromey@redhat.com <tromey@redhat.com>>*
*| and Alexandre Duret-Lutz <adl@gnu.org <adl@gnu.org>>.*
*| AUTOV is 1*
*| NOTE: Executing ACLOCAL="aclocal
--system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/"
autoreconf --verbose --install --force --exclude=autopoint -I
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/*
*| autoreconf: Entering directory `.'*
*| autoreconf: configure.ac <http://configure.ac/>: not using Gettext*
*| autoreconf: running: aclocal
--system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/
-I
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
-I
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
--force -I m4*
*| autoreconf: configure.ac <http://configure.ac/>: tracing*
*| autoreconf: running: libtoolize --copy --force*
*| libtoolize: putting auxiliary files in `.'.*
*| libtoolize: copying file `./ltmain.sh'*
*| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.*
*| libtoolize: copying file `m4/libtool.m4'*
*| libtoolize: copying file `m4/ltoptions.m4'*
*| libtoolize: copying file `m4/ltsugar.m4'*
*| libtoolize: copying file `m4/ltversion.m4'*
*| libtoolize: copying file `m4/lt~obsolete.m4'*
*| autoreconf: running:
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
--include=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
--force*
*| configure:17934: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR*
*| If this token and others are legitimate, please use
m4_pattern_allow.*
*| See the Autoconf documentation.*
*| autoreconf:
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
failed with exit status: 1*
*| ERROR: autoreconf execution failed.*
*| WARNING: exit code 1 from a shell command.*
*| ERROR: Function failed: do_configure (log file is located at
/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
*ERROR: Task 5
(/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/../poky/meta/recipes-graphics/harfbuzz/harfbuzz_1.3.0.bb
<http://harfbuzz_1.3.0.bb/>, do_configure) failed with exit code '1'*
Any help will be appreciated.
[-- Attachment #2: Type: text/html, Size: 10177 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR
2018-03-01 10:21 error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR Abhishekh Awanti
@ 2018-03-01 11:07 ` Burton, Ross
2018-03-01 11:36 ` Abhishekh Awanti
2018-03-02 5:55 ` Khem Raj
1 sibling, 1 reply; 7+ messages in thread
From: Burton, Ross @ 2018-03-01 11:07 UTC (permalink / raw)
To: Abhishekh Awanti; +Cc: Yocto-mailing-list
[-- Attachment #1: Type: text/plain, Size: 6527 bytes --]
That usually means that the recipe doesn't inherit pkgconfig, but as this
is an oe-core recipe it should be doing this. Can you verify this, and if
you can still reproduce it after deleting tmp/ then please attach the
entire log.do_configure.
Ross
On 1 March 2018 at 10:21, Abhishekh Awanti <abhishekh@relysys.co.in> wrote:
> Hi,
>
> I am trying to build the package "*harfbuzz-1.3.0" , *but i am getting
> the following configure error
>
> *Build Configuration:*
> *BB_VERSION = "1.22.0"*
> *BUILD_SYS = "x86_64-linux"*
> *NATIVELSBSTRING = "Ubuntu-14.04"*
> *TARGET_SYS = "arm-poky-linux-gnueabi"*
> *MACHINE = "iwg21m"*
> *DISTRO = "poky"*
> *DISTRO_VERSION = "1.6.1"*
> *TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa15"*
> *TARGET_FPU = "vfp-neon"*
> *meta *
> *meta-yocto *
> *meta-yocto-bsp = "hmi_tmp:9febda430a88ba23b539394e5d54b59ae87405f6"*
> *meta-renesas *
> *meta-rzg1 = "master:2ea602f03b9c2378c1d7dc28675a675d18edb0e3"*
> *meta-oe *
> *meta-multimedia *
> *meta-networking = "hmi_tmp:dca466c074c9a35bc0133e7e0d65cca0731e2acf"*
> *meta-linaro-toolchain =
> "hmi_build:8a0601723c06fdb75e62aa0f0cf15fc9d7d90167"*
> *common *
> *hmi-demo = "master:2cdb73bb902ecd4462cd0a4a66d5d116d0f7c113"*
> *meta-ndvr = "<unknown>:<unknown>"*
>
> *NOTE: Preparing runqueue*
> *NOTE: Executing SetScene Tasks*
> *NOTE: Executing RunQueue Tasks*
> *ERROR: Function failed: do_configure (log file is located at
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
> *ERROR: Logfile of failure stored in:
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451*
> *Log data follows:*
> *| DEBUG: Executing python function sysroot_cleansstate*
> *| DEBUG: Python function sysroot_cleansstate finished*
> *| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']*
> *| DEBUG: Executing shell function autotools_preconfigure*
> *| DEBUG: Shell function autotools_preconfigure finished*
> *| DEBUG: Executing python function autotools_copy_aclocals*
> *| DEBUG: Python function autotools_copy_aclocals finished*
> *| DEBUG: Executing shell function do_configure*
> *| automake (GNU automake) 1.14*
> *| Copyright (C) 2013 Free Software Foundation, Inc.*
> *| License GPLv2+: GNU GPL version 2 or later
> <http://gnu.org/licenses/gpl-2.0.html
> <http://gnu.org/licenses/gpl-2.0.html>>*
> *| This is free software: you are free to change and redistribute it.*
> *| There is NO WARRANTY, to the extent permitted by law.*
> *| *
> *| Written by Tom Tromey <tromey@redhat.com <tromey@redhat.com>>*
> *| and Alexandre Duret-Lutz <adl@gnu.org <adl@gnu.org>>.*
> *| AUTOV is 1*
> *| NOTE: Executing ACLOCAL="aclocal
> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/"
> autoreconf --verbose --install --force --exclude=autopoint -I
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/*
> *| autoreconf: Entering directory `.'*
> *| autoreconf: configure.ac <http://configure.ac/>: not using Gettext*
> *| autoreconf: running: aclocal
> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/
> -I
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
> -I
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
> --force -I m4*
> *| autoreconf: configure.ac <http://configure.ac/>: tracing*
> *| autoreconf: running: libtoolize --copy --force*
> *| libtoolize: putting auxiliary files in `.'.*
> *| libtoolize: copying file `./ltmain.sh'*
> *| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.*
> *| libtoolize: copying file `m4/libtool.m4'*
> *| libtoolize: copying file `m4/ltoptions.m4'*
> *| libtoolize: copying file `m4/ltsugar.m4'*
> *| libtoolize: copying file `m4/ltversion.m4'*
> *| libtoolize: copying file `m4/lt~obsolete.m4'*
> *| autoreconf: running:
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
> --include=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
> --force*
> *| configure:17934: error: possibly undefined macro:
> PKG_CONFIG_SYSROOT_DIR*
> *| If this token and others are legitimate, please use
> m4_pattern_allow.*
> *| See the Autoconf documentation.*
> *| autoreconf:
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
> failed with exit status: 1*
> *| ERROR: autoreconf execution failed.*
> *| WARNING: exit code 1 from a shell command.*
> *| ERROR: Function failed: do_configure (log file is located at
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
> *ERROR: Task 5
> (/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/../poky/meta/recipes-graphics/harfbuzz/harfbuzz_1.3.0.bb
> <http://harfbuzz_1.3.0.bb/>, do_configure) failed with exit code '1'*
>
> Any help will be appreciated.
>
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
>
[-- Attachment #2: Type: text/html, Size: 11137 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR
2018-03-01 11:07 ` Burton, Ross
@ 2018-03-01 11:36 ` Abhishekh Awanti
2018-03-01 11:38 ` Burton, Ross
0 siblings, 1 reply; 7+ messages in thread
From: Abhishekh Awanti @ 2018-03-01 11:36 UTC (permalink / raw)
To: Burton, Ross; +Cc: Yocto-mailing-list
[-- Attachment #1: Type: text/plain, Size: 6936 bytes --]
yeah the pkgconfig has been inherited.
If i delete the tmp/ , again i have to recompile my whole build? Is tat you
wanted to do me?
Thanks and Regards,
Abhishek Awanti
Mob: +919620666017
On Thu, Mar 1, 2018 at 4:37 PM, Burton, Ross <ross.burton@intel.com> wrote:
> That usually means that the recipe doesn't inherit pkgconfig, but as this
> is an oe-core recipe it should be doing this. Can you verify this, and if
> you can still reproduce it after deleting tmp/ then please attach the
> entire log.do_configure.
>
> Ross
>
> On 1 March 2018 at 10:21, Abhishekh Awanti <abhishekh@relysys.co.in>
> wrote:
>
>> Hi,
>>
>> I am trying to build the package "*harfbuzz-1.3.0" , *but i am getting
>> the following configure error
>>
>> *Build Configuration:*
>> *BB_VERSION = "1.22.0"*
>> *BUILD_SYS = "x86_64-linux"*
>> *NATIVELSBSTRING = "Ubuntu-14.04"*
>> *TARGET_SYS = "arm-poky-linux-gnueabi"*
>> *MACHINE = "iwg21m"*
>> *DISTRO = "poky"*
>> *DISTRO_VERSION = "1.6.1"*
>> *TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa15"*
>> *TARGET_FPU = "vfp-neon"*
>> *meta *
>> *meta-yocto *
>> *meta-yocto-bsp = "hmi_tmp:9febda430a88ba23b539394e5d54b59ae87405f6"*
>> *meta-renesas *
>> *meta-rzg1 = "master:2ea602f03b9c2378c1d7dc28675a675d18edb0e3"*
>> *meta-oe *
>> *meta-multimedia *
>> *meta-networking = "hmi_tmp:dca466c074c9a35bc0133e7e0d65cca0731e2acf"*
>> *meta-linaro-toolchain =
>> "hmi_build:8a0601723c06fdb75e62aa0f0cf15fc9d7d90167"*
>> *common *
>> *hmi-demo = "master:2cdb73bb902ecd4462cd0a4a66d5d116d0f7c113"*
>> *meta-ndvr = "<unknown>:<unknown>"*
>>
>> *NOTE: Preparing runqueue*
>> *NOTE: Executing SetScene Tasks*
>> *NOTE: Executing RunQueue Tasks*
>> *ERROR: Function failed: do_configure (log file is located at
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
>> *ERROR: Logfile of failure stored in:
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451*
>> *Log data follows:*
>> *| DEBUG: Executing python function sysroot_cleansstate*
>> *| DEBUG: Python function sysroot_cleansstate finished*
>> *| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
>> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']*
>> *| DEBUG: Executing shell function autotools_preconfigure*
>> *| DEBUG: Shell function autotools_preconfigure finished*
>> *| DEBUG: Executing python function autotools_copy_aclocals*
>> *| DEBUG: Python function autotools_copy_aclocals finished*
>> *| DEBUG: Executing shell function do_configure*
>> *| automake (GNU automake) 1.14*
>> *| Copyright (C) 2013 Free Software Foundation, Inc.*
>> *| License GPLv2+: GNU GPL version 2 or later
>> <http://gnu.org/licenses/gpl-2.0.html
>> <http://gnu.org/licenses/gpl-2.0.html>>*
>> *| This is free software: you are free to change and redistribute it.*
>> *| There is NO WARRANTY, to the extent permitted by law.*
>> *| *
>> *| Written by Tom Tromey <tromey@redhat.com <tromey@redhat.com>>*
>> *| and Alexandre Duret-Lutz <adl@gnu.org <adl@gnu.org>>.*
>> *| AUTOV is 1*
>> *| NOTE: Executing ACLOCAL="aclocal
>> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/"
>> autoreconf --verbose --install --force --exclude=autopoint -I
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/*
>> *| autoreconf: Entering directory `.'*
>> *| autoreconf: configure.ac <http://configure.ac/>: not using Gettext*
>> *| autoreconf: running: aclocal
>> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/
>> -I
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>> -I
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>> --force -I m4*
>> *| autoreconf: configure.ac <http://configure.ac/>: tracing*
>> *| autoreconf: running: libtoolize --copy --force*
>> *| libtoolize: putting auxiliary files in `.'.*
>> *| libtoolize: copying file `./ltmain.sh'*
>> *| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.*
>> *| libtoolize: copying file `m4/libtool.m4'*
>> *| libtoolize: copying file `m4/ltoptions.m4'*
>> *| libtoolize: copying file `m4/ltsugar.m4'*
>> *| libtoolize: copying file `m4/ltversion.m4'*
>> *| libtoolize: copying file `m4/lt~obsolete.m4'*
>> *| autoreconf: running:
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>> --include=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>> --force*
>> *| configure:17934: error: possibly undefined macro:
>> PKG_CONFIG_SYSROOT_DIR*
>> *| If this token and others are legitimate, please use
>> m4_pattern_allow.*
>> *| See the Autoconf documentation.*
>> *| autoreconf:
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>> failed with exit status: 1*
>> *| ERROR: autoreconf execution failed.*
>> *| WARNING: exit code 1 from a shell command.*
>> *| ERROR: Function failed: do_configure (log file is located at
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
>> *ERROR: Task 5
>> (/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/../poky/meta/recipes-graphics/harfbuzz/harfbuzz_1.3.0.bb
>> <http://harfbuzz_1.3.0.bb/>, do_configure) failed with exit code '1'*
>>
>> Any help will be appreciated.
>>
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>
[-- Attachment #2: Type: text/html, Size: 13033 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR
2018-03-01 11:36 ` Abhishekh Awanti
@ 2018-03-01 11:38 ` Burton, Ross
0 siblings, 0 replies; 7+ messages in thread
From: Burton, Ross @ 2018-03-01 11:38 UTC (permalink / raw)
To: Abhishekh Awanti; +Cc: Yocto-mailing-list
[-- Attachment #1: Type: text/plain, Size: 7274 bytes --]
Assuming you don't delete sstate-cache then you won't need to rebuild
anything.
Ross
On 1 March 2018 at 11:36, Abhishekh Awanti <abhishekh@relysys.co.in> wrote:
> yeah the pkgconfig has been inherited.
> If i delete the tmp/ , again i have to recompile my whole build? Is tat
> you wanted to do me?
>
>
> Thanks and Regards,
> Abhishek Awanti
> Mob: +919620666017 <+91%2096206%2066017>
>
> On Thu, Mar 1, 2018 at 4:37 PM, Burton, Ross <ross.burton@intel.com>
> wrote:
>
>> That usually means that the recipe doesn't inherit pkgconfig, but as this
>> is an oe-core recipe it should be doing this. Can you verify this, and if
>> you can still reproduce it after deleting tmp/ then please attach the
>> entire log.do_configure.
>>
>> Ross
>>
>> On 1 March 2018 at 10:21, Abhishekh Awanti <abhishekh@relysys.co.in>
>> wrote:
>>
>>> Hi,
>>>
>>> I am trying to build the package "*harfbuzz-1.3.0" , *but i am getting
>>> the following configure error
>>>
>>> *Build Configuration:*
>>> *BB_VERSION = "1.22.0"*
>>> *BUILD_SYS = "x86_64-linux"*
>>> *NATIVELSBSTRING = "Ubuntu-14.04"*
>>> *TARGET_SYS = "arm-poky-linux-gnueabi"*
>>> *MACHINE = "iwg21m"*
>>> *DISTRO = "poky"*
>>> *DISTRO_VERSION = "1.6.1"*
>>> *TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa15"*
>>> *TARGET_FPU = "vfp-neon"*
>>> *meta *
>>> *meta-yocto *
>>> *meta-yocto-bsp = "hmi_tmp:9febda430a88ba23b539394e5d54b59ae87405f6"*
>>> *meta-renesas *
>>> *meta-rzg1 = "master:2ea602f03b9c2378c1d7dc28675a675d18edb0e3"*
>>> *meta-oe *
>>> *meta-multimedia *
>>> *meta-networking = "hmi_tmp:dca466c074c9a35bc0133e7e0d65cca0731e2acf"*
>>> *meta-linaro-toolchain =
>>> "hmi_build:8a0601723c06fdb75e62aa0f0cf15fc9d7d90167"*
>>> *common *
>>> *hmi-demo = "master:2cdb73bb902ecd4462cd0a4a66d5d116d0f7c113"*
>>> *meta-ndvr = "<unknown>:<unknown>"*
>>>
>>> *NOTE: Preparing runqueue*
>>> *NOTE: Executing SetScene Tasks*
>>> *NOTE: Executing RunQueue Tasks*
>>> *ERROR: Function failed: do_configure (log file is located at
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
>>> *ERROR: Logfile of failure stored in:
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451*
>>> *Log data follows:*
>>> *| DEBUG: Executing python function sysroot_cleansstate*
>>> *| DEBUG: Python function sysroot_cleansstate finished*
>>> *| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
>>> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']*
>>> *| DEBUG: Executing shell function autotools_preconfigure*
>>> *| DEBUG: Shell function autotools_preconfigure finished*
>>> *| DEBUG: Executing python function autotools_copy_aclocals*
>>> *| DEBUG: Python function autotools_copy_aclocals finished*
>>> *| DEBUG: Executing shell function do_configure*
>>> *| automake (GNU automake) 1.14*
>>> *| Copyright (C) 2013 Free Software Foundation, Inc.*
>>> *| License GPLv2+: GNU GPL version 2 or later
>>> <http://gnu.org/licenses/gpl-2.0.html
>>> <http://gnu.org/licenses/gpl-2.0.html>>*
>>> *| This is free software: you are free to change and redistribute it.*
>>> *| There is NO WARRANTY, to the extent permitted by law.*
>>> *| *
>>> *| Written by Tom Tromey <tromey@redhat.com <tromey@redhat.com>>*
>>> *| and Alexandre Duret-Lutz <adl@gnu.org <adl@gnu.org>>.*
>>> *| AUTOV is 1*
>>> *| NOTE: Executing ACLOCAL="aclocal
>>> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/"
>>> autoreconf --verbose --install --force --exclude=autopoint -I
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/*
>>> *| autoreconf: Entering directory `.'*
>>> *| autoreconf: configure.ac <http://configure.ac/>: not using Gettext*
>>> *| autoreconf: running: aclocal
>>> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/
>>> -I
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>>> -I
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>>> --force -I m4*
>>> *| autoreconf: configure.ac <http://configure.ac/>: tracing*
>>> *| autoreconf: running: libtoolize --copy --force*
>>> *| libtoolize: putting auxiliary files in `.'.*
>>> *| libtoolize: copying file `./ltmain.sh'*
>>> *| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.*
>>> *| libtoolize: copying file `m4/libtool.m4'*
>>> *| libtoolize: copying file `m4/ltoptions.m4'*
>>> *| libtoolize: copying file `m4/ltsugar.m4'*
>>> *| libtoolize: copying file `m4/ltversion.m4'*
>>> *| libtoolize: copying file `m4/lt~obsolete.m4'*
>>> *| autoreconf: running:
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>>> --include=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>>> --force*
>>> *| configure:17934: error: possibly undefined macro:
>>> PKG_CONFIG_SYSROOT_DIR*
>>> *| If this token and others are legitimate, please use
>>> m4_pattern_allow.*
>>> *| See the Autoconf documentation.*
>>> *| autoreconf:
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>>> failed with exit status: 1*
>>> *| ERROR: autoreconf execution failed.*
>>> *| WARNING: exit code 1 from a shell command.*
>>> *| ERROR: Function failed: do_configure (log file is located at
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)*
>>> *ERROR: Task 5
>>> (/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/../poky/meta/recipes-graphics/harfbuzz/harfbuzz_1.3.0.bb
>>> <http://harfbuzz_1.3.0.bb/>, do_configure) failed with exit code '1'*
>>>
>>> Any help will be appreciated.
>>>
>>>
>>> --
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>>
>>
>
[-- Attachment #2: Type: text/html, Size: 13741 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR
2018-03-01 10:21 error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR Abhishekh Awanti
2018-03-01 11:07 ` Burton, Ross
@ 2018-03-02 5:55 ` Khem Raj
2018-03-02 12:38 ` Abhishekh Awanti
1 sibling, 1 reply; 7+ messages in thread
From: Khem Raj @ 2018-03-02 5:55 UTC (permalink / raw)
To: Abhishekh Awanti, yocto
On 3/1/18 2:21 AM, Abhishekh Awanti wrote:
> Hi,
>
> I am trying to build the package "/harfbuzz-1.3.0" , /but i am getting
> the following configure error
your build seems to be a bit mixed, the baseline seems to be daisy based
( 1.6 ) but you are building harfbuzz which is introduced in morty ( 2.2
) release. Doe the original version work ?
>
> /Build Configuration:/
> /BB_VERSION = "1.22.0"/
> /BUILD_SYS = "x86_64-linux"/
> /NATIVELSBSTRING = "Ubuntu-14.04"/
> /TARGET_SYS = "arm-poky-linux-gnueabi"/
> /MACHINE = "iwg21m"/
> /DISTRO = "poky"/
> /DISTRO_VERSION = "1.6.1"/
> /TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa15"/
> /TARGET_FPU = "vfp-neon"/
> /meta /
> /meta-yocto /
> /meta-yocto-bsp = "hmi_tmp:9febda430a88ba23b539394e5d54b59ae87405f6"/
> /meta-renesas /
> /meta-rzg1 = "master:2ea602f03b9c2378c1d7dc28675a675d18edb0e3"/
> /meta-oe /
> /meta-multimedia /
> /meta-networking = "hmi_tmp:dca466c074c9a35bc0133e7e0d65cca0731e2acf"/
> /meta-linaro-toolchain =
> "hmi_build:8a0601723c06fdb75e62aa0f0cf15fc9d7d90167"/
> /common /
> /hmi-demo = "master:2cdb73bb902ecd4462cd0a4a66d5d116d0f7c113"/
> /meta-ndvr = "<unknown>:<unknown>"/
> /
> /
> /NOTE: Preparing runqueue/
> /NOTE: Executing SetScene Tasks/
> /NOTE: Executing RunQueue Tasks/
> /ERROR: Function failed: do_configure (log file is located at
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)/
> /ERROR: Logfile of failure stored in:
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451/
> /Log data follows:/
> /| DEBUG: Executing python function sysroot_cleansstate/
> /| DEBUG: Python function sysroot_cleansstate finished/
> /| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']/
> /| DEBUG: Executing shell function autotools_preconfigure/
> /| DEBUG: Shell function autotools_preconfigure finished/
> /| DEBUG: Executing python function autotools_copy_aclocals/
> /| DEBUG: Python function autotools_copy_aclocals finished/
> /| DEBUG: Executing shell function do_configure/
> /| automake (GNU automake) 1.14/
> /| Copyright (C) 2013 Free Software Foundation, Inc./
> /| License GPLv2+: GNU GPL version 2 or later
> <http://gnu.org/licenses/gpl-2.0.html
> <http://gnu.org/licenses/gpl-2.0.html>>/
> /| This is free software: you are free to change and redistribute it./
> /| There is NO WARRANTY, to the extent permitted by law./
> /| /
> /| Written by Tom Tromey <tromey@redhat.com <mailto:tromey@redhat.com>>/
> /| and Alexandre Duret-Lutz <adl@gnu.org <mailto:adl@gnu.org>>./
> /| AUTOV is 1/
> /| NOTE: Executing ACLOCAL="aclocal
> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/"
> autoreconf --verbose --install --force --exclude=autopoint -I
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4//
> /| autoreconf: Entering directory `.'/
> /| autoreconf:configure.ac <http://configure.ac/>: not using Gettext/
> /| autoreconf: running: aclocal
> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/
> -I
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
> -I
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
> --force -I m4/
> /| autoreconf:configure.ac <http://configure.ac/>: tracing/
> /| autoreconf: running: libtoolize --copy --force/
> /| libtoolize: putting auxiliary files in `.'./
> /| libtoolize: copying file `./ltmain.sh'/
> /| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'./
> /| libtoolize: copying file `m4/libtool.m4'/
> /| libtoolize: copying file `m4/ltoptions.m4'/
> /| libtoolize: copying file `m4/ltsugar.m4'/
> /| libtoolize: copying file `m4/ltversion.m4'/
> /| libtoolize: copying file `m4/lt~obsolete.m4'/
> /| autoreconf: running:
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
> --include=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
> --force/
> /| configure:17934: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR/
> /| If this token and others are legitimate, please use
> m4_pattern_allow./
> /| See the Autoconf documentation./
> /| autoreconf:
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
> failed with exit status: 1/
> /| ERROR: autoreconf execution failed./
> /| WARNING: exit code 1 from a shell command./
> /| ERROR: Function failed: do_configure (log file is located at
> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)/
> /ERROR: Task 5
> (/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/../poky/meta/recipes-graphics/harfbuzz/harfbuzz_1.3.0.bb
> <http://harfbuzz_1.3.0.bb/>, do_configure) failed with exit code '1'/
>
> Any help will be appreciated.
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR
2018-03-02 5:55 ` Khem Raj
@ 2018-03-02 12:38 ` Abhishekh Awanti
2018-03-02 15:22 ` Khem Raj
0 siblings, 1 reply; 7+ messages in thread
From: Abhishekh Awanti @ 2018-03-02 12:38 UTC (permalink / raw)
To: Khem Raj; +Cc: Yocto-mailing-list
[-- Attachment #1: Type: text/plain, Size: 6787 bytes --]
Hi,
Before i was trying to build the baseline version only, due to this error i
moved to latest version.
As Ross said i deleted tmp/ and now the package can able to build
successfully.
Should i move to original version only?
On Fri, Mar 2, 2018 at 11:25 AM, Khem Raj <raj.khem@gmail.com> wrote:
>
>
> On 3/1/18 2:21 AM, Abhishekh Awanti wrote:
>
>> Hi,
>>
>> I am trying to build the package "/harfbuzz-1.3.0" , /but i am getting
>> the following configure error
>>
>
> your build seems to be a bit mixed, the baseline seems to be daisy based (
> 1.6 ) but you are building harfbuzz which is introduced in morty ( 2.2 )
> release. Doe the original version work ?
>
>
>> /Build Configuration:/
>> /BB_VERSION = "1.22.0"/
>> /BUILD_SYS = "x86_64-linux"/
>> /NATIVELSBSTRING = "Ubuntu-14.04"/
>> /TARGET_SYS = "arm-poky-linux-gnueabi"/
>> /MACHINE = "iwg21m"/
>> /DISTRO = "poky"/
>> /DISTRO_VERSION = "1.6.1"/
>> /TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa15"/
>> /TARGET_FPU = "vfp-neon"/
>> /meta /
>> /meta-yocto /
>> /meta-yocto-bsp = "hmi_tmp:9febda430a88ba23b539394e5d54b59ae87405f6"/
>> /meta-renesas /
>> /meta-rzg1 = "master:2ea602f03b9c2378c1d7dc28675a675d18edb0e3"/
>> /meta-oe /
>> /meta-multimedia /
>> /meta-networking = "hmi_tmp:dca466c074c9a35bc0133e7e0d65cca0731e2acf"/
>> /meta-linaro-toolchain = "hmi_build:8a0601723c06fdb75e6
>> 2aa0f0cf15fc9d7d90167"/
>> /common /
>> /hmi-demo = "master:2cdb73bb902ecd4462cd0a4a66d5d116d0f7c113"/
>> /meta-ndvr = "<unknown>:<unknown>"/
>> /
>> /
>> /NOTE: Preparing runqueue/
>> /NOTE: Executing SetScene Tasks/
>> /NOTE: Executing RunQueue Tasks/
>> /ERROR: Function failed: do_configure (log file is located at
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/
>> iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortex
>> a15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/
>> temp/log.do_configure.451)/
>> /ERROR: Logfile of failure stored in: /home/bharath/Abhishek_WorkSpa
>> ce/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_
>> feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-
>> gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451/
>> /Log data follows:/
>> /| DEBUG: Executing python function sysroot_cleansstate/
>> /| DEBUG: Python function sysroot_cleansstate finished/
>> /| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
>> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']/
>> /| DEBUG: Executing shell function autotools_preconfigure/
>> /| DEBUG: Shell function autotools_preconfigure finished/
>> /| DEBUG: Executing python function autotools_copy_aclocals/
>> /| DEBUG: Python function autotools_copy_aclocals finished/
>> /| DEBUG: Executing shell function do_configure/
>> /| automake (GNU automake) 1.14/
>> /| Copyright (C) 2013 Free Software Foundation, Inc./
>> /| License GPLv2+: GNU GPL version 2 or later <
>> http://gnu.org/licenses/gpl-2.0.html <http://gnu.org/licenses/gpl-2
>> .0.html>>/
>> /| This is free software: you are free to change and redistribute it./
>> /| There is NO WARRANTY, to the extent permitted by law./
>> /| /
>> /| Written by Tom Tromey <tromey@redhat.com <mailto:tromey@redhat.com>>/
>> /| and Alexandre Duret-Lutz <adl@gnu.org <mailto:adl@gnu.org>>./
>> /| AUTOV is 1/
>> /| NOTE: Executing ACLOCAL="aclocal --system-acdir=/home/bharath/A
>> bhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_
>> As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky
>> -linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/" autoreconf
>> --verbose --install --force --exclude=autopoint -I
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/
>> iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortex
>> a15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4//
>> /| autoreconf: Entering directory `.'/
>> /| autoreconf:configure.ac <http://configure.ac/>: not using Gettext/
>> /| autoreconf: running: aclocal --system-acdir=/home/bharath/A
>> bhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_
>> As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky
>> -linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/ -I
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/
>> iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortex
>> a15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>> -I /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/
>> iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortex
>> a15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>> --force -I m4/
>> /| autoreconf:configure.ac <http://configure.ac/>: tracing/
>> /| autoreconf: running: libtoolize --copy --force/
>> /| libtoolize: putting auxiliary files in `.'./
>> /| libtoolize: copying file `./ltmain.sh'/
>> /| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'./
>> /| libtoolize: copying file `m4/libtool.m4'/
>> /| libtoolize: copying file `m4/ltoptions.m4'/
>> /| libtoolize: copying file `m4/ltsugar.m4'/
>> /| libtoolize: copying file `m4/ltversion.m4'/
>> /| libtoolize: copying file `m4/lt~obsolete.m4'/
>> /| autoreconf: running: /home/bharath/Abhishek_WorkSpa
>> ce/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_
>> feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>> --include=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/
>> RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/
>> cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>> --force/
>> /| configure:17934: error: possibly undefined macro:
>> PKG_CONFIG_SYSROOT_DIR/
>> /| If this token and others are legitimate, please use
>> m4_pattern_allow./
>> /| See the Autoconf documentation./
>> /| autoreconf: /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/
>> iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>> failed with exit status: 1/
>> /| ERROR: autoreconf execution failed./
>> /| WARNING: exit code 1 from a shell command./
>> /| ERROR: Function failed: do_configure (log file is located at
>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/
>> iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortex
>> a15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/
>> temp/log.do_configure.451)/
>> /ERROR: Task 5 (/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/
>> iwave/build/Build_As_On_23_feb_2018/build/../poky/meta/
>> recipes-graphics/harfbuzz/harfbuzz_1.3.0.bb <http://harfbuzz_1.3.0.bb/>,
>> do_configure) failed with exit code '1'/
>>
>> Any help will be appreciated.
>>
>>
>>
[-- Attachment #2: Type: text/html, Size: 9859 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR
2018-03-02 12:38 ` Abhishekh Awanti
@ 2018-03-02 15:22 ` Khem Raj
0 siblings, 0 replies; 7+ messages in thread
From: Khem Raj @ 2018-03-02 15:22 UTC (permalink / raw)
To: Abhishekh Awanti; +Cc: Yocto-mailing-list
On Fri, Mar 2, 2018 at 4:38 AM, Abhishekh Awanti
<abhishekh@relysys.co.in> wrote:
> Hi,
> Before i was trying to build the baseline version only, due to this error i
> moved to latest version.
> As Ross said i deleted tmp/ and now the package can able to build
> successfully.
> Should i move to original version only?
>
if you have no pressing need to upgrade
staying with original version is better since thats the tested set.
> On Fri, Mar 2, 2018 at 11:25 AM, Khem Raj <raj.khem@gmail.com> wrote:
>>
>>
>>
>> On 3/1/18 2:21 AM, Abhishekh Awanti wrote:
>>>
>>> Hi,
>>>
>>> I am trying to build the package "/harfbuzz-1.3.0" , /but i am getting
>>> the following configure error
>>
>>
>> your build seems to be a bit mixed, the baseline seems to be daisy based (
>> 1.6 ) but you are building harfbuzz which is introduced in morty ( 2.2 )
>> release. Doe the original version work ?
>>
>>>
>>> /Build Configuration:/
>>> /BB_VERSION = "1.22.0"/
>>> /BUILD_SYS = "x86_64-linux"/
>>> /NATIVELSBSTRING = "Ubuntu-14.04"/
>>> /TARGET_SYS = "arm-poky-linux-gnueabi"/
>>> /MACHINE = "iwg21m"/
>>> /DISTRO = "poky"/
>>> /DISTRO_VERSION = "1.6.1"/
>>> /TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa15"/
>>> /TARGET_FPU = "vfp-neon"/
>>> /meta /
>>> /meta-yocto /
>>> /meta-yocto-bsp = "hmi_tmp:9febda430a88ba23b539394e5d54b59ae87405f6"/
>>> /meta-renesas /
>>> /meta-rzg1 = "master:2ea602f03b9c2378c1d7dc28675a675d18edb0e3"/
>>> /meta-oe /
>>> /meta-multimedia /
>>> /meta-networking = "hmi_tmp:dca466c074c9a35bc0133e7e0d65cca0731e2acf"/
>>> /meta-linaro-toolchain =
>>> "hmi_build:8a0601723c06fdb75e62aa0f0cf15fc9d7d90167"/
>>> /common /
>>> /hmi-demo = "master:2cdb73bb902ecd4462cd0a4a66d5d116d0f7c113"/
>>> /meta-ndvr = "<unknown>:<unknown>"/
>>> /
>>> /
>>> /NOTE: Preparing runqueue/
>>> /NOTE: Executing SetScene Tasks/
>>> /NOTE: Executing RunQueue Tasks/
>>> /ERROR: Function failed: do_configure (log file is located at
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)/
>>> /ERROR: Logfile of failure stored in:
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451/
>>> /Log data follows:/
>>> /| DEBUG: Executing python function sysroot_cleansstate/
>>> /| DEBUG: Python function sysroot_cleansstate finished/
>>> /| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
>>> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']/
>>> /| DEBUG: Executing shell function autotools_preconfigure/
>>> /| DEBUG: Shell function autotools_preconfigure finished/
>>> /| DEBUG: Executing python function autotools_copy_aclocals/
>>> /| DEBUG: Python function autotools_copy_aclocals finished/
>>> /| DEBUG: Executing shell function do_configure/
>>> /| automake (GNU automake) 1.14/
>>> /| Copyright (C) 2013 Free Software Foundation, Inc./
>>> /| License GPLv2+: GNU GPL version 2 or later
>>> <http://gnu.org/licenses/gpl-2.0.html
>>> <http://gnu.org/licenses/gpl-2.0.html>>/
>>> /| This is free software: you are free to change and redistribute it./
>>> /| There is NO WARRANTY, to the extent permitted by law./
>>> /| /
>>> /| Written by Tom Tromey <tromey@redhat.com <mailto:tromey@redhat.com>>/
>>> /| and Alexandre Duret-Lutz <adl@gnu.org <mailto:adl@gnu.org>>./
>>> /| AUTOV is 1/
>>> /| NOTE: Executing ACLOCAL="aclocal
>>> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/"
>>> autoreconf --verbose --install --force --exclude=autopoint -I
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4//
>>> /| autoreconf: Entering directory `.'/
>>> /| autoreconf:configure.ac <http://configure.ac/>: not using Gettext/
>>> /| autoreconf: running: aclocal
>>> --system-acdir=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/build/aclocal-copy/
>>> -I
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>>> -I
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>>> --force -I m4/
>>> /| autoreconf:configure.ac <http://configure.ac/>: tracing/
>>> /| autoreconf: running: libtoolize --copy --force/
>>> /| libtoolize: putting auxiliary files in `.'./
>>> /| libtoolize: copying file `./ltmain.sh'/
>>> /| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'./
>>> /| libtoolize: copying file `m4/libtool.m4'/
>>> /| libtoolize: copying file `m4/ltoptions.m4'/
>>> /| libtoolize: copying file `m4/ltsugar.m4'/
>>> /| libtoolize: copying file `m4/ltversion.m4'/
>>> /| libtoolize: copying file `m4/lt~obsolete.m4'/
>>> /| autoreconf: running:
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>>> --include=/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/harfbuzz-1.3.0/m4/
>>> --force/
>>> /| configure:17934: error: possibly undefined macro:
>>> PKG_CONFIG_SYSROOT_DIR/
>>> /| If this token and others are legitimate, please use
>>> m4_pattern_allow./
>>> /| See the Autoconf documentation./
>>> /| autoreconf:
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf
>>> failed with exit status: 1/
>>> /| ERROR: autoreconf execution failed./
>>> /| WARNING: exit code 1 from a shell command./
>>> /| ERROR: Function failed: do_configure (log file is located at
>>> /home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/tmp/work/cortexa15hf-vfp-neon-poky-linux-gnueabi/harfbuzz/1.3.0-r0/temp/log.do_configure.451)/
>>> /ERROR: Task 5
>>> (/home/bharath/Abhishek_WorkSpace/Projects/Renesas/RZG1H/iwave/build/Build_As_On_23_feb_2018/build/../poky/meta/recipes-graphics/harfbuzz/harfbuzz_1.3.0.bb
>>> <http://harfbuzz_1.3.0.bb/>, do_configure) failed with exit code '1'/
>>>
>>> Any help will be appreciated.
>>>
>>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-03-02 15:22 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-01 10:21 error: possibly undefined macro: PKG_CONFIG_SYSROOT_DIR Abhishekh Awanti
2018-03-01 11:07 ` Burton, Ross
2018-03-01 11:36 ` Abhishekh Awanti
2018-03-01 11:38 ` Burton, Ross
2018-03-02 5:55 ` Khem Raj
2018-03-02 12:38 ` Abhishekh Awanti
2018-03-02 15:22 ` Khem Raj
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.