* bbappend file not used
@ 2018-03-05 15:15 Vincent Daanen
2018-03-06 12:07 ` Vincent Daanen
0 siblings, 1 reply; 7+ messages in thread
From: Vincent Daanen @ 2018-03-05 15:15 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 1041 bytes --]
Dears,
I want to build an image using systemd and system-networkd as network manager and set static ip address to eth0.
To do so, I use a bbappend file to systemd.
The problem is that the systemd_%.bbappend file does not appear when calling bitbake-layers show-appends. I'm quite sure it is not processed because when a voluntary add a typo, it does not break the bitbake process.
What did I do wrong ??
Below is my "files architecture":
Yocto
|-- Sources (Rocko 2.4.1)
|-- myDir
|-- build
|-- conf
Local.conf
|-- meta-myLayer
|-- conf
|-- recipes-core
|-- images
my-image.bb
|-- systemd
systemd_%.bbappend
|-- system
eth.network
The target is a generic x86_64 board (AAEON GENE BT 05 with J1900 processor).
Host system is ubuntu 16.04 LTS
Thanks
Vince
[-- Attachment #2: Type: text/html, Size: 14230 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* bbappend file not used
2018-03-05 15:15 bbappend file not used Vincent Daanen
@ 2018-03-06 12:07 ` Vincent Daanen
2018-03-06 12:28 ` Mircea Gliga
2018-03-06 12:28 ` Burton, Ross
0 siblings, 2 replies; 7+ messages in thread
From: Vincent Daanen @ 2018-03-06 12:07 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 1034 bytes --]
Dears,
I want to build an image using systemd and system-networkd as network manager and set static ip address to eth0.
To do so, I use a bbappend file to systemd.
The problem is that the systemd_%.bbappend file does not appear when calling bitbake-layers show-appends. I'm quite sure it is not processed because when a voluntary add a typo, it does not break the bitbake process.
What did I do wrong ??
Below is my "files architecture":
Yocto
|-- Sources (Rocko 2.4.1)
|-- myDir
|-- build
|-- conf
Local.conf
|-- meta-myLayer
|-- conf
|-- recipes-core
|-- images
my-image.bb
|-- systemd
systemd_%.bbappend
|-- system
eth.network
The target is a generic x86_64 board (AAEON GENE BT 05 with J1900 processor).
Host system is ubuntu 16.04 LTS
Thanks
Vince
[-- Attachment #2: Type: text/html, Size: 5906 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bbappend file not used
2018-03-06 12:07 ` Vincent Daanen
@ 2018-03-06 12:28 ` Mircea Gliga
2018-03-06 12:28 ` Burton, Ross
1 sibling, 0 replies; 7+ messages in thread
From: Mircea Gliga @ 2018-03-06 12:28 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 1253 bytes --]
Is your layer present in build/conf/bblayers.conf ?
On 06/03/18 14:07, Vincent Daanen wrote:
>
> Dears,
>
> I want to build an image using systemd and system-networkd as network
> manager and set static ip address to eth0.
>
> To do so, I use a bbappend file to systemd.
>
> The problem is that the systemd_%.bbappend file does not appear when
> calling bitbake-layers show-appends. I’m quite sure it is not
> processed because when a voluntary add a typo, it does not break the
> bitbake process.
>
> What did I do wrong ??
>
> Below is my “files architecture”:
>
> Yocto
>
> |-- Sources (Rocko 2.4.1)
>
> |-- myDir
>
> |-- build
>
> |-- conf
>
> Local.conf
>
> |-- meta-myLayer
>
> |-- conf
>
> |-- recipes-core
>
> |-- images
>
> my-image.bb
>
> |-- systemd
>
> systemd_%.bbappend
>
> |-- system
>
> eth.network
>
> The target is a generic x86_64 board (AAEON GENE BT 05 with J1900
> processor).
>
> Host system is ubuntu 16.04 LTS
>
> Thanks
>
> Vince
>
>
>
[-- Attachment #2: Type: text/html, Size: 5374 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bbappend file not used
2018-03-06 12:07 ` Vincent Daanen
2018-03-06 12:28 ` Mircea Gliga
@ 2018-03-06 12:28 ` Burton, Ross
2018-03-06 12:42 ` Vincent Daanen
2018-03-06 15:24 ` Vincent Daanen
1 sibling, 2 replies; 7+ messages in thread
From: Burton, Ross @ 2018-03-06 12:28 UTC (permalink / raw)
To: Vincent Daanen; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 1647 bytes --]
Does your layer.conf tell bitbake to read bbappends? Should be something
like:
BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
${LAYERDIR}/recipes-*/*/*.bbappend"
Ross
On 6 March 2018 at 12:07, Vincent Daanen <vincent.daanen@orthotaxy.com>
wrote:
> Dears,
>
>
>
> I want to build an image using systemd and system-networkd as network
> manager and set static ip address to eth0.
>
>
>
> To do so, I use a bbappend file to systemd.
>
>
>
> The problem is that the systemd_%.bbappend file does not appear when
> calling bitbake-layers show-appends. I’m quite sure it is not processed
> because when a voluntary add a typo, it does not break the bitbake process.
>
>
>
> What did I do wrong ??
>
>
>
> Below is my “files architecture”:
>
> Yocto
>
> |-- Sources (Rocko 2.4.1)
>
> |-- myDir
>
> |-- build
>
> |-- conf
>
> Local.conf
>
> |-- meta-myLayer
>
> |-- conf
>
> |-- recipes-core
>
> |-- images
>
> my-image.bb
>
> |-- systemd
>
> systemd_%.bbappend
>
> |-- system
>
> eth.network
>
>
>
> The target is a generic x86_64 board (AAEON GENE BT 05 with J1900
> processor).
>
> Host system is ubuntu 16.04 LTS
>
>
>
>
>
>
>
> Thanks
>
>
>
> Vince
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
>
[-- Attachment #2: Type: text/html, Size: 3953 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bbappend file not used
2018-03-06 12:28 ` Burton, Ross
@ 2018-03-06 12:42 ` Vincent Daanen
2018-03-06 15:24 ` Vincent Daanen
1 sibling, 0 replies; 7+ messages in thread
From: Vincent Daanen @ 2018-03-06 12:42 UTC (permalink / raw)
To: Burton, Ross; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 1800 bytes --]
Yes these lines are in the layer.conf file
De : Burton, Ross [mailto:ross.burton@intel.com]
Envoyé : mardi 6 mars 2018 13:28
À : Vincent Daanen <vincent.daanen@orthotaxy.com>
Cc : yocto@yoctoproject.org
Objet : Re: [yocto] bbappend file not used
Does your layer.conf tell bitbake to read bbappends? Should be something like:
BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
${LAYERDIR}/recipes-*/*/*.bbappend"
Ross
On 6 March 2018 at 12:07, Vincent Daanen <vincent.daanen@orthotaxy.com<mailto:vincent.daanen@orthotaxy.com>> wrote:
Dears,
I want to build an image using systemd and system-networkd as network manager and set static ip address to eth0.
To do so, I use a bbappend file to systemd.
The problem is that the systemd_%.bbappend file does not appear when calling bitbake-layers show-appends. I’m quite sure it is not processed because when a voluntary add a typo, it does not break the bitbake process.
What did I do wrong ??
Below is my “files architecture”:
Yocto
|-- Sources (Rocko 2.4.1)
|-- myDir
|-- build
|-- conf
Local.conf
|-- meta-myLayer
|-- conf
|-- recipes-core
|-- images
my-image.bb<http://my-image.bb>
|-- systemd
systemd_%.bbappend
|-- system
eth.network
The target is a generic x86_64 board (AAEON GENE BT 05 with J1900 processor).
Host system is ubuntu 16.04 LTS
Thanks
Vince
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org<mailto:yocto@yoctoproject.org>
https://lists.yoctoproject.org/listinfo/yocto
[-- Attachment #2: Type: text/html, Size: 9571 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bbappend file not used
2018-03-06 12:28 ` Burton, Ross
2018-03-06 12:42 ` Vincent Daanen
@ 2018-03-06 15:24 ` Vincent Daanen
2018-03-06 19:38 ` Paul Eggleton
1 sibling, 1 reply; 7+ messages in thread
From: Vincent Daanen @ 2018-03-06 15:24 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 2085 bytes --]
Hi guys,
After having spent some time to find what was wrong, I decided to rewrite all the files and … the bbappend file is not processed…
May be there was a typo I did not see or some ‘code’ I copied/pasted from internet included utf characters..
Anyway, I can continue building my image..
Regards
Vince
De : Burton, Ross [mailto:ross.burton@intel.com]
Envoyé : mardi 6 mars 2018 13:28
À : Vincent Daanen <vincent.daanen@orthotaxy.com>
Cc : yocto@yoctoproject.org
Objet : Re: [yocto] bbappend file not used
Does your layer.conf tell bitbake to read bbappends? Should be something like:
BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
${LAYERDIR}/recipes-*/*/*.bbappend"
Ross
On 6 March 2018 at 12:07, Vincent Daanen <vincent.daanen@orthotaxy.com<mailto:vincent.daanen@orthotaxy.com>> wrote:
Dears,
I want to build an image using systemd and system-networkd as network manager and set static ip address to eth0.
To do so, I use a bbappend file to systemd.
The problem is that the systemd_%.bbappend file does not appear when calling bitbake-layers show-appends. I’m quite sure it is not processed because when a voluntary add a typo, it does not break the bitbake process.
What did I do wrong ??
Below is my “files architecture”:
Yocto
|-- Sources (Rocko 2.4.1)
|-- myDir
|-- build
|-- conf
Local.conf
|-- meta-myLayer
|-- conf
|-- recipes-core
|-- images
my-image.bb<http://my-image.bb>
|-- systemd
systemd_%.bbappend
|-- system
eth.network
The target is a generic x86_64 board (AAEON GENE BT 05 with J1900 processor).
Host system is ubuntu 16.04 LTS
Thanks
Vince
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org<mailto:yocto@yoctoproject.org>
https://lists.yoctoproject.org/listinfo/yocto
[-- Attachment #2: Type: text/html, Size: 10724 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bbappend file not used
2018-03-06 15:24 ` Vincent Daanen
@ 2018-03-06 19:38 ` Paul Eggleton
0 siblings, 0 replies; 7+ messages in thread
From: Paul Eggleton @ 2018-03-06 19:38 UTC (permalink / raw)
To: Vincent Daanen; +Cc: yocto
Hi Vincent,
On Wednesday, 7 March 2018 4:24:46 AM NZDT Vincent Daanen wrote:
> After having spent some time to find what was wrong, I decided to rewrite
> all the files and … the bbappend file is not processed…
>
> May be there was a typo I did not see or some ‘code’ I copied/pasted from
> internet included utf characters..
>
> Anyway, I can continue building my image..
Er, so is the problem fixed or not? The above is a little ambiguous.
FYI there is a technical FAQ question on this:
https://wiki.yoctoproject.org/wiki/Technical_FAQ#I.27ve_created_a_bbappend_for_a_recipe_but_what_I.27m_setting_there_isn.27t_having_any_effect.2C_how_do_I_fix_this.3F
Cheers,
Paul
--
Paul Eggleton
Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-03-06 19:38 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-05 15:15 bbappend file not used Vincent Daanen
2018-03-06 12:07 ` Vincent Daanen
2018-03-06 12:28 ` Mircea Gliga
2018-03-06 12:28 ` Burton, Ross
2018-03-06 12:42 ` Vincent Daanen
2018-03-06 15:24 ` Vincent Daanen
2018-03-06 19:38 ` Paul Eggleton
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.