From: "Rafael J. Wysocki" <rafael@kernel.org> To: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, Hanjun Guo <guohanjun@huawei.com>, Sudeep Holla <sudeep.holla@arm.com>, "Rafael J. Wysocki" <rafael@kernel.org>, Russell King - ARM Linux <linux@armlinux.org.uk>, Len Brown <lenb@kernel.org>, Robert Moore <robert.moore@intel.com>, ACPI Devel Maling List <linux-acpi@vger.kernel.org>, Linux ARM <linux-arm-kernel@lists.infradead.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, patches@amperecomputing.com, scott@os.amperecomputing.com, darren@os.amperecomputing.com Subject: Re: [PATCH v3 2/2] ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device Date: Tue, 4 Jan 2022 15:28:57 +0100 [thread overview] Message-ID: <CAJZ5v0g7OeQ=pa-7j+5NDMjbAsr89FUg09u0i2k98uJWf_GgTg@mail.gmail.com> (raw) In-Reply-To: <20211231033725.21109-3-ilkka@os.amperecomputing.com> On Fri, Dec 31, 2021 at 4:37 AM Ilkka Koskinen <ilkka@os.amperecomputing.com> wrote: > > ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices > Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to > issue diagnostic dump and reset via an SDEI event or an interrupt. > This patch implements SDEI path. > > [0] https://developer.arm.com/documentation/den0093/latest/ > > Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> This requires an ACK from the arm64 side if you want me to take it. However, I can apply patch 1 from this series if that helps. > --- > drivers/acpi/arm64/Kconfig | 8 +++ > drivers/acpi/arm64/Makefile | 1 + > drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 134 insertions(+) > create mode 100644 drivers/acpi/arm64/agdi.c > > diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig > index 6dba187f4f2e..24869ba5b365 100644 > --- a/drivers/acpi/arm64/Kconfig > +++ b/drivers/acpi/arm64/Kconfig > @@ -8,3 +8,11 @@ config ACPI_IORT > > config ACPI_GTDT > bool > + > +config ACPI_AGDI > + bool "Arm Generic Diagnostic Dump and Reset Device Interface" > + depends on ARM_SDE_INTERFACE > + help > + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is > + a standard that enables issuing a non-maskable diagnostic dump and > + reset command. > diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile > index 66acbe77f46e..7b9e4045659d 100644 > --- a/drivers/acpi/arm64/Makefile > +++ b/drivers/acpi/arm64/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0-only > +obj-$(CONFIG_ACPI_AGDI) += agdi.o > obj-$(CONFIG_ACPI_IORT) += iort.o > obj-$(CONFIG_ACPI_GTDT) += gtdt.o > obj-y += dma.o > diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c > new file mode 100644 > index 000000000000..6525ccbae5c1 > --- /dev/null > +++ b/drivers/acpi/arm64/agdi.c > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * This file implements handling of > + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) > + * > + * Copyright (c) 2021, Ampere Computing LLC > + */ > + > +#define pr_fmt(fmt) "ACPI: AGDI: " fmt > + > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/acpi.h> > +#include <linux/arm_sdei.h> > +#include <linux/io.h> > + > +struct agdi_data { > + int sdei_event; > +}; > + > +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) > +{ > + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); > + return 0; > +} > + > +static int agdi_sdei_probe(struct platform_device *pdev, > + struct agdi_data *adata) > +{ > + int err; > + > + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); > + if (err) { > + dev_err(&pdev->dev, "Failed to register for SDEI event %d", > + adata->sdei_event); > + return err; > + } > + > + err = sdei_event_enable(adata->sdei_event); > + if (err) { > + sdei_event_unregister(adata->sdei_event); > + dev_err(&pdev->dev, "Failed to enable event %d\n", > + adata->sdei_event); > + return err; > + } > + > + return 0; > +} > + > +static int agdi_probe(struct platform_device *pdev) > +{ > + struct agdi_data *adata; > + > + adata = dev_get_platdata(&pdev->dev); > + if (!adata) > + return -EINVAL; > + > + return agdi_sdei_probe(pdev, adata); > +} > + > +static int agdi_remove(struct platform_device *pdev) > +{ > + struct agdi_data *adata = platform_get_drvdata(pdev); > + > + sdei_event_disable(adata->sdei_event); > + sdei_event_unregister(adata->sdei_event); > + > + return 0; > +} > + > +static struct platform_driver agdi_driver = { > + .driver = { > + .name = "agdi", > + }, > + .probe = agdi_probe, > + .remove = agdi_remove, > +}; > + > +static int __init agdi_init(void) > +{ > + int ret; > + acpi_status status; > + struct acpi_table_agdi *agdi_table; > + struct agdi_data pdata; > + struct platform_device *pdev; > + > + if (acpi_disabled) > + return 0; > + > + status = acpi_get_table(ACPI_SIG_AGDI, 0, > + (struct acpi_table_header **) &agdi_table); > + if (ACPI_FAILURE(status)) > + return -ENODEV; > + > + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { > + pr_warn("Interrupt signaling is not supported"); > + ret = -ENODEV; > + goto err_put_table; > + } > + > + pdata.sdei_event = agdi_table->sdei_event; > + > + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); > + if (IS_ERR(pdev)) { > + ret = PTR_ERR(pdev); > + goto err_put_table; > + } > + > + ret = platform_driver_register(&agdi_driver); > + if (ret) > + goto err_device_unregister; > + > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return 0; > + > +err_device_unregister: > + platform_device_unregister(pdev); > +err_put_table: > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return ret; > +} > +device_initcall(agdi_init); > -- > 2.17.1 >
WARNING: multiple messages have this Message-ID (diff)
From: "Rafael J. Wysocki" <rafael@kernel.org> To: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, Hanjun Guo <guohanjun@huawei.com>, Sudeep Holla <sudeep.holla@arm.com>, "Rafael J. Wysocki" <rafael@kernel.org>, Russell King - ARM Linux <linux@armlinux.org.uk>, Len Brown <lenb@kernel.org>, Robert Moore <robert.moore@intel.com>, ACPI Devel Maling List <linux-acpi@vger.kernel.org>, Linux ARM <linux-arm-kernel@lists.infradead.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, patches@amperecomputing.com, scott@os.amperecomputing.com, darren@os.amperecomputing.com Subject: Re: [PATCH v3 2/2] ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device Date: Tue, 4 Jan 2022 15:28:57 +0100 [thread overview] Message-ID: <CAJZ5v0g7OeQ=pa-7j+5NDMjbAsr89FUg09u0i2k98uJWf_GgTg@mail.gmail.com> (raw) In-Reply-To: <20211231033725.21109-3-ilkka@os.amperecomputing.com> On Fri, Dec 31, 2021 at 4:37 AM Ilkka Koskinen <ilkka@os.amperecomputing.com> wrote: > > ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices > Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to > issue diagnostic dump and reset via an SDEI event or an interrupt. > This patch implements SDEI path. > > [0] https://developer.arm.com/documentation/den0093/latest/ > > Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> This requires an ACK from the arm64 side if you want me to take it. However, I can apply patch 1 from this series if that helps. > --- > drivers/acpi/arm64/Kconfig | 8 +++ > drivers/acpi/arm64/Makefile | 1 + > drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 134 insertions(+) > create mode 100644 drivers/acpi/arm64/agdi.c > > diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig > index 6dba187f4f2e..24869ba5b365 100644 > --- a/drivers/acpi/arm64/Kconfig > +++ b/drivers/acpi/arm64/Kconfig > @@ -8,3 +8,11 @@ config ACPI_IORT > > config ACPI_GTDT > bool > + > +config ACPI_AGDI > + bool "Arm Generic Diagnostic Dump and Reset Device Interface" > + depends on ARM_SDE_INTERFACE > + help > + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is > + a standard that enables issuing a non-maskable diagnostic dump and > + reset command. > diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile > index 66acbe77f46e..7b9e4045659d 100644 > --- a/drivers/acpi/arm64/Makefile > +++ b/drivers/acpi/arm64/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0-only > +obj-$(CONFIG_ACPI_AGDI) += agdi.o > obj-$(CONFIG_ACPI_IORT) += iort.o > obj-$(CONFIG_ACPI_GTDT) += gtdt.o > obj-y += dma.o > diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c > new file mode 100644 > index 000000000000..6525ccbae5c1 > --- /dev/null > +++ b/drivers/acpi/arm64/agdi.c > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * This file implements handling of > + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) > + * > + * Copyright (c) 2021, Ampere Computing LLC > + */ > + > +#define pr_fmt(fmt) "ACPI: AGDI: " fmt > + > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/acpi.h> > +#include <linux/arm_sdei.h> > +#include <linux/io.h> > + > +struct agdi_data { > + int sdei_event; > +}; > + > +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) > +{ > + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); > + return 0; > +} > + > +static int agdi_sdei_probe(struct platform_device *pdev, > + struct agdi_data *adata) > +{ > + int err; > + > + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); > + if (err) { > + dev_err(&pdev->dev, "Failed to register for SDEI event %d", > + adata->sdei_event); > + return err; > + } > + > + err = sdei_event_enable(adata->sdei_event); > + if (err) { > + sdei_event_unregister(adata->sdei_event); > + dev_err(&pdev->dev, "Failed to enable event %d\n", > + adata->sdei_event); > + return err; > + } > + > + return 0; > +} > + > +static int agdi_probe(struct platform_device *pdev) > +{ > + struct agdi_data *adata; > + > + adata = dev_get_platdata(&pdev->dev); > + if (!adata) > + return -EINVAL; > + > + return agdi_sdei_probe(pdev, adata); > +} > + > +static int agdi_remove(struct platform_device *pdev) > +{ > + struct agdi_data *adata = platform_get_drvdata(pdev); > + > + sdei_event_disable(adata->sdei_event); > + sdei_event_unregister(adata->sdei_event); > + > + return 0; > +} > + > +static struct platform_driver agdi_driver = { > + .driver = { > + .name = "agdi", > + }, > + .probe = agdi_probe, > + .remove = agdi_remove, > +}; > + > +static int __init agdi_init(void) > +{ > + int ret; > + acpi_status status; > + struct acpi_table_agdi *agdi_table; > + struct agdi_data pdata; > + struct platform_device *pdev; > + > + if (acpi_disabled) > + return 0; > + > + status = acpi_get_table(ACPI_SIG_AGDI, 0, > + (struct acpi_table_header **) &agdi_table); > + if (ACPI_FAILURE(status)) > + return -ENODEV; > + > + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { > + pr_warn("Interrupt signaling is not supported"); > + ret = -ENODEV; > + goto err_put_table; > + } > + > + pdata.sdei_event = agdi_table->sdei_event; > + > + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); > + if (IS_ERR(pdev)) { > + ret = PTR_ERR(pdev); > + goto err_put_table; > + } > + > + ret = platform_driver_register(&agdi_driver); > + if (ret) > + goto err_device_unregister; > + > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return 0; > + > +err_device_unregister: > + platform_device_unregister(pdev); > +err_put_table: > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return ret; > +} > +device_initcall(agdi_init); > -- > 2.17.1 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-04 14:29 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-31 3:37 [PATCH v3 0/2] ACPI: Arm Generic Diagnostic Dump and Reset device Ilkka Koskinen 2021-12-31 3:37 ` Ilkka Koskinen 2021-12-31 3:37 ` [PATCH v3 1/2] ACPI: tables: Add AGDI to the list of known table signatures Ilkka Koskinen 2021-12-31 3:37 ` Ilkka Koskinen 2021-12-31 3:37 ` [PATCH v3 2/2] ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device Ilkka Koskinen 2021-12-31 3:37 ` Ilkka Koskinen 2022-01-04 14:28 ` Rafael J. Wysocki [this message] 2022-01-04 14:28 ` Rafael J. Wysocki 2022-01-05 7:05 ` Ilkka Koskinen 2022-01-05 7:05 ` Ilkka Koskinen 2022-01-05 1:34 ` Hanjun Guo 2022-01-05 1:34 ` Hanjun Guo 2022-01-05 7:10 ` Ilkka Koskinen 2022-01-05 7:10 ` Ilkka Koskinen 2022-01-05 10:46 ` Lorenzo Pieralisi 2022-01-05 10:46 ` Lorenzo Pieralisi 2022-01-05 23:46 ` Ilkka Koskinen 2022-01-05 23:46 ` Ilkka Koskinen 2022-01-14 2:17 ` Ilkka Koskinen 2022-01-14 2:17 ` Ilkka Koskinen 2022-01-20 16:38 ` Lorenzo Pieralisi 2022-01-20 16:38 ` Lorenzo Pieralisi 2022-01-25 23:04 ` Ilkka Koskinen 2022-01-25 23:04 ` Ilkka Koskinen 2021-12-31 10:25 ` [PATCH v3 0/2] ACPI: " Russell King (Oracle) 2021-12-31 10:25 ` Russell King (Oracle)
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CAJZ5v0g7OeQ=pa-7j+5NDMjbAsr89FUg09u0i2k98uJWf_GgTg@mail.gmail.com' \ --to=rafael@kernel.org \ --cc=darren@os.amperecomputing.com \ --cc=guohanjun@huawei.com \ --cc=ilkka@os.amperecomputing.com \ --cc=lenb@kernel.org \ --cc=linux-acpi@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=lorenzo.pieralisi@arm.com \ --cc=patches@amperecomputing.com \ --cc=robert.moore@intel.com \ --cc=scott@os.amperecomputing.com \ --cc=sudeep.holla@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.