All of lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH 1/1] configs/acmesystems_arietta_g25: update kernel and at91bootstrap3
@ 2016-09-22 14:43 Biagio Montaruli
  2016-09-22 15:17 ` Angelo Compagnucci
  2016-09-23  6:07 ` Thomas Petazzoni
  0 siblings, 2 replies; 4+ messages in thread
From: Biagio Montaruli @ 2016-09-22 14:43 UTC (permalink / raw)
  To: buildroot

- configs/acmesystems_arietta_g25_128mb_defconfig,
  configs/acmesystems_arietta_g25_256mb_defconfig :
  update default configuration files for both 128MB and 256MB version

- board/acmesystems/arietta-g25/genimage.cfg
  board/acmesystems/arietta-g25/post-image.sh :
  improve 'post-image.sh' and 'genimage.cfg' used to build sdcard.img

- board/acmesystems/arietta-g25/readme.txt :
  update documentation for Arietta G25

Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
---
 board/acmesystems/arietta-g25/genimage.cfg      | 12 ++++-----
 board/acmesystems/arietta-g25/post-image.sh     |  4 +--
 board/acmesystems/arietta-g25/readme.txt        | 14 ++++++----
 configs/acmesystems_arietta_g25_128mb_defconfig | 36 ++++++++++++++-----------
 configs/acmesystems_arietta_g25_256mb_defconfig | 36 ++++++++++++++-----------
 5 files changed, 58 insertions(+), 44 deletions(-)

diff --git a/board/acmesystems/arietta-g25/genimage.cfg b/board/acmesystems/arietta-g25/genimage.cfg
index 1080b0e..420f1b6 100644
--- a/board/acmesystems/arietta-g25/genimage.cfg
+++ b/board/acmesystems/arietta-g25/genimage.cfg
@@ -1,18 +1,18 @@
 # Minimal SD card image for the Acmesystems Arietta G25
-#
+
 image boot.vfat {
 	vfat {
 		file zImage {
 			image = "zImage"
 		}
-
+		
 		file acme-arietta.dtb {
-			image = "at91-ariag25.dtb"
+			image = "at91-ariettag25.dtb"
 		}
-
+		
 		file boot.bin {
-			image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
-		}
+			image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.8.6.bin"
+		} 
 	}
 	size = 16M
 }
diff --git a/board/acmesystems/arietta-g25/post-image.sh b/board/acmesystems/arietta-g25/post-image.sh
index c82b189..2846f56 100755
--- a/board/acmesystems/arietta-g25/post-image.sh
+++ b/board/acmesystems/arietta-g25/post-image.sh
@@ -6,11 +6,9 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
 
 rm -rf "${GENIMAGE_TMP}"
 
-genimage                               \
+genimage  \
 	--rootpath "${TARGET_DIR}"     \
 	--tmppath "${GENIMAGE_TMP}"    \
 	--inputpath "${BINARIES_DIR}"  \
 	--outputpath "${BINARIES_DIR}" \
 	--config "${GENIMAGE_CFG}"
-
-exit $?
diff --git a/board/acmesystems/arietta-g25/readme.txt b/board/acmesystems/arietta-g25/readme.txt
index 485e275..f356b0a 100644
--- a/board/acmesystems/arietta-g25/readme.txt
+++ b/board/acmesystems/arietta-g25/readme.txt
@@ -1,4 +1,4 @@
-Acmesystems Arietta G25
+Acme Systems Arietta G25
 
 Intro
 =====
@@ -13,8 +13,8 @@ documentation on http://www.acmesystems.it/arietta.
 Build instructions
 ==================
 
-To build an image for the arietta g25 choose the configuration
-corresponding to the arietta variant.
+To build an image for the Arietta G25 choose the configuration
+corresponding to the Arietta variant.
 
 For 128MB RAM variant type:
 
@@ -24,7 +24,11 @@ else for 256MB RAM variant type:
 
 $ make acmesystems_arietta_g25_256mb_defconfig
 
-then:
+To customize the configuration chosen type:
+
+$ make menuconfig
+
+When you are ready to start building Buildroot type:
 
 $ make
 
@@ -38,7 +42,7 @@ Copy the bootable "sdcard.img" onto an SD card with "dd":
 
   $ sudo dd if=output/images/sdcard.img of=/dev/sdX
 
-Insert the microSD card into the arietta slot and power it.
+Insert the microSD card into the Arietta slot and power it.
 
 The image just built is fairly basic and the only output
 you will get is on serial console, please consider to use a DPI
diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig
index e5ddf13..a68ac57 100644
--- a/configs/acmesystems_arietta_g25_128mb_defconfig
+++ b/configs/acmesystems_arietta_g25_128mb_defconfig
@@ -1,30 +1,36 @@
 # Architecture
 BR2_arm=y
 
-# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+# Kernel headers
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
-# Kernel
+# System configuration
+BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
+
+# Kernel configuration
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
-BR2_LINUX_KERNEL_XZ=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
+
+# Root filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs"
 
-# Bootloader
+# AT91bootstrap bootloader
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
 
-# Image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_PACKAGE_HOST_GENIMAGE=y
+# Tools to build sdcard.img
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig b/configs/acmesystems_arietta_g25_256mb_defconfig
index cf6f67b..ce9ebac 100644
--- a/configs/acmesystems_arietta_g25_256mb_defconfig
+++ b/configs/acmesystems_arietta_g25_256mb_defconfig
@@ -1,30 +1,36 @@
 # Architecture
 BR2_arm=y
 
-# Toolchain
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+# Kernel headers
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
-# Kernel
+# System configuration
+BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
+
+# Kernel configuration
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
-BR2_LINUX_KERNEL_XZ=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
+
+# Root filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs"
 
-# Bootloader
+# AT91bootstrap bootloader
 BR2_TARGET_AT91BOOTSTRAP3=y
 BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git"
-BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
 
-# Image
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_PACKAGE_HOST_GENIMAGE=y
+# Tools to build sdcard.img
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] configs/acmesystems_arietta_g25: update kernel and at91bootstrap3
  2016-09-22 14:43 [Buildroot] [PATCH 1/1] configs/acmesystems_arietta_g25: update kernel and at91bootstrap3 Biagio Montaruli
@ 2016-09-22 15:17 ` Angelo Compagnucci
  2016-09-23  6:07 ` Thomas Petazzoni
  1 sibling, 0 replies; 4+ messages in thread
From: Angelo Compagnucci @ 2016-09-22 15:17 UTC (permalink / raw)
  To: buildroot

Hi Biagio,

2016-09-22 16:43 GMT+02:00 Biagio Montaruli <biagio.hkr@gmail.com>:

> - configs/acmesystems_arietta_g25_128mb_defconfig,
>   configs/acmesystems_arietta_g25_256mb_defconfig :
>   update default configuration files for both 128MB and 256MB version
>
> - board/acmesystems/arietta-g25/genimage.cfg
>   board/acmesystems/arietta-g25/post-image.sh :
>   improve 'post-image.sh' and 'genimage.cfg' used to build sdcard.img
>
> - board/acmesystems/arietta-g25/readme.txt :
>   update documentation for Arietta G25
>
> Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
>

Acked-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>


> ---
>  board/acmesystems/arietta-g25/genimage.cfg      | 12 ++++-----
>  board/acmesystems/arietta-g25/post-image.sh     |  4 +--
>  board/acmesystems/arietta-g25/readme.txt        | 14 ++++++----
>  configs/acmesystems_arietta_g25_128mb_defconfig | 36
> ++++++++++++++-----------
>  configs/acmesystems_arietta_g25_256mb_defconfig | 36
> ++++++++++++++-----------
>  5 files changed, 58 insertions(+), 44 deletions(-)
>
> diff --git a/board/acmesystems/arietta-g25/genimage.cfg
> b/board/acmesystems/arietta-g25/genimage.cfg
> index 1080b0e..420f1b6 100644
> --- a/board/acmesystems/arietta-g25/genimage.cfg
> +++ b/board/acmesystems/arietta-g25/genimage.cfg
> @@ -1,18 +1,18 @@
>  # Minimal SD card image for the Acmesystems Arietta G25
> -#
> +
>  image boot.vfat {
>         vfat {
>                 file zImage {
>                         image = "zImage"
>                 }
> -
> +
>                 file acme-arietta.dtb {
> -                       image = "at91-ariag25.dtb"
> +                       image = "at91-ariettag25.dtb"
>                 }
> -
> +
>                 file boot.bin {
> -                       image = "at91sam9x5_arietta-
> sdcardboot-linux-zimage-dt-3.7.bin"
> -               }
> +                       image = "at91sam9x5_arietta-
> sdcardboot-linux-zimage-dt-3.8.6.bin"
> +               }
>         }
>         size = 16M
>  }
> diff --git a/board/acmesystems/arietta-g25/post-image.sh
> b/board/acmesystems/arietta-g25/post-image.sh
> index c82b189..2846f56 100755
> --- a/board/acmesystems/arietta-g25/post-image.sh
> +++ b/board/acmesystems/arietta-g25/post-image.sh
> @@ -6,11 +6,9 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
>
>  rm -rf "${GENIMAGE_TMP}"
>
> -genimage                               \
> +genimage  \
>         --rootpath "${TARGET_DIR}"     \
>         --tmppath "${GENIMAGE_TMP}"    \
>         --inputpath "${BINARIES_DIR}"  \
>         --outputpath "${BINARIES_DIR}" \
>         --config "${GENIMAGE_CFG}"
> -
> -exit $?
> diff --git a/board/acmesystems/arietta-g25/readme.txt
> b/board/acmesystems/arietta-g25/readme.txt
> index 485e275..f356b0a 100644
> --- a/board/acmesystems/arietta-g25/readme.txt
> +++ b/board/acmesystems/arietta-g25/readme.txt
> @@ -1,4 +1,4 @@
> -Acmesystems Arietta G25
> +Acme Systems Arietta G25
>
>  Intro
>  =====
> @@ -13,8 +13,8 @@ documentation on http://www.acmesystems.it/arietta.
>  Build instructions
>  ==================
>
> -To build an image for the arietta g25 choose the configuration
> -corresponding to the arietta variant.
> +To build an image for the Arietta G25 choose the configuration
> +corresponding to the Arietta variant.
>
>  For 128MB RAM variant type:
>
> @@ -24,7 +24,11 @@ else for 256MB RAM variant type:
>
>  $ make acmesystems_arietta_g25_256mb_defconfig
>
> -then:
> +To customize the configuration chosen type:
> +
> +$ make menuconfig
> +
> +When you are ready to start building Buildroot type:
>
>  $ make
>
> @@ -38,7 +42,7 @@ Copy the bootable "sdcard.img" onto an SD card with "dd":
>
>    $ sudo dd if=output/images/sdcard.img of=/dev/sdX
>
> -Insert the microSD card into the arietta slot and power it.
> +Insert the microSD card into the Arietta slot and power it.
>
>  The image just built is fairly basic and the only output
>  you will get is on serial console, please consider to use a DPI
> diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig
> b/configs/acmesystems_arietta_g25_128mb_defconfig
> index e5ddf13..a68ac57 100644
> --- a/configs/acmesystems_arietta_g25_128mb_defconfig
> +++ b/configs/acmesystems_arietta_g25_128mb_defconfig
> @@ -1,30 +1,36 @@
>  # Architecture
>  BR2_arm=y
>
> -# Toolchain
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> +# Kernel headers
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
>
> -# Kernel
> +# System configuration
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> +BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-
> g25/post-image.sh"
> +
> +# Kernel configuration
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4"
>  BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
> -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
> -BR2_LINUX_KERNEL_XZ=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
> +
> +# Root filesystem
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs"
>
> -# Bootloader
> +# AT91bootstrap bootloader
>  BR2_TARGET_AT91BOOTSTRAP3=y
>  BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
> -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/
> at91bootstrap.git"
> -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="
> cedbde4b36695b715f469f4872f47e5cc8115000"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/
> at91bootstrap.git"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6"
>  BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
>
> -# Image
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-
> g25/post-image.sh"
> -BR2_TARGET_ROOTFS_EXT2=y
> -BR2_TARGET_ROOTFS_EXT2_4=y
> -# BR2_TARGET_ROOTFS_TAR is not set
> -BR2_PACKAGE_HOST_GENIMAGE=y
> +# Tools to build sdcard.img
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig
> b/configs/acmesystems_arietta_g25_256mb_defconfig
> index cf6f67b..ce9ebac 100644
> --- a/configs/acmesystems_arietta_g25_256mb_defconfig
> +++ b/configs/acmesystems_arietta_g25_256mb_defconfig
> @@ -1,30 +1,36 @@
>  # Architecture
>  BR2_arm=y
>
> -# Toolchain
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> +# Kernel headers
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
>
> -# Kernel
> +# System configuration
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot"
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
> +BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-
> g25/post-image.sh"
> +
> +# Kernel configuration
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4"
>  BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
> -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
> -BR2_LINUX_KERNEL_XZ=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25"
> +
> +# Root filesystem
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs"
>
> -# Bootloader
> +# AT91bootstrap bootloader
>  BR2_TARGET_AT91BOOTSTRAP3=y
>  BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
> -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/
> at91bootstrap.git"
> -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="
> cedbde4b36695b715f469f4872f47e5cc8115000"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/
> at91bootstrap.git"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6"
>  BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
>
> -# Image
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-
> g25/post-image.sh"
> -BR2_TARGET_ROOTFS_EXT2=y
> -BR2_TARGET_ROOTFS_EXT2_4=y
> -# BR2_TARGET_ROOTFS_TAR is not set
> -BR2_PACKAGE_HOST_GENIMAGE=y
> +# Tools to build sdcard.img
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> --
> 2.7.4
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>



-- 
Profile: http://it.linkedin.com/in/compagnucciangelo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20160922/96c0fc8e/attachment.html>

^ permalink raw reply	[flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] configs/acmesystems_arietta_g25: update kernel and at91bootstrap3
  2016-09-22 14:43 [Buildroot] [PATCH 1/1] configs/acmesystems_arietta_g25: update kernel and at91bootstrap3 Biagio Montaruli
  2016-09-22 15:17 ` Angelo Compagnucci
@ 2016-09-23  6:07 ` Thomas Petazzoni
  2016-09-23  8:01   ` Biagio Montaruli
  1 sibling, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2016-09-23  6:07 UTC (permalink / raw)
  To: buildroot

Hello,

On Thu, 22 Sep 2016 16:43:59 +0200, Biagio Montaruli wrote:
> - configs/acmesystems_arietta_g25_128mb_defconfig,
>   configs/acmesystems_arietta_g25_256mb_defconfig :
>   update default configuration files for both 128MB and 256MB version
> 
> - board/acmesystems/arietta-g25/genimage.cfg
>   board/acmesystems/arietta-g25/post-image.sh :
>   improve 'post-image.sh' and 'genimage.cfg' used to build sdcard.img
> 
> - board/acmesystems/arietta-g25/readme.txt :
>   update documentation for Arietta G25
> 
> Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
> ---
>  board/acmesystems/arietta-g25/genimage.cfg      | 12 ++++-----
>  board/acmesystems/arietta-g25/post-image.sh     |  4 +--
>  board/acmesystems/arietta-g25/readme.txt        | 14 ++++++----
>  configs/acmesystems_arietta_g25_128mb_defconfig | 36 ++++++++++++++-----------
>  configs/acmesystems_arietta_g25_256mb_defconfig | 36 ++++++++++++++-----------
>  5 files changed, 58 insertions(+), 44 deletions(-)

Applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] configs/acmesystems_arietta_g25: update kernel and at91bootstrap3
  2016-09-23  6:07 ` Thomas Petazzoni
@ 2016-09-23  8:01   ` Biagio Montaruli
  0 siblings, 0 replies; 4+ messages in thread
From: Biagio Montaruli @ 2016-09-23  8:01 UTC (permalink / raw)
  To: buildroot

You're welcome !

2016-09-23 8:07 GMT+02:00 Thomas Petazzoni <
thomas.petazzoni@free-electrons.com>:

> Hello,
>
> On Thu, 22 Sep 2016 16:43:59 +0200, Biagio Montaruli wrote:
> > - configs/acmesystems_arietta_g25_128mb_defconfig,
> >   configs/acmesystems_arietta_g25_256mb_defconfig :
> >   update default configuration files for both 128MB and 256MB version
> >
> > - board/acmesystems/arietta-g25/genimage.cfg
> >   board/acmesystems/arietta-g25/post-image.sh :
> >   improve 'post-image.sh' and 'genimage.cfg' used to build sdcard.img
> >
> > - board/acmesystems/arietta-g25/readme.txt :
> >   update documentation for Arietta G25
> >
> > Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
> > ---
> >  board/acmesystems/arietta-g25/genimage.cfg      | 12 ++++-----
> >  board/acmesystems/arietta-g25/post-image.sh     |  4 +--
> >  board/acmesystems/arietta-g25/readme.txt        | 14 ++++++----
> >  configs/acmesystems_arietta_g25_128mb_defconfig | 36
> ++++++++++++++-----------
> >  configs/acmesystems_arietta_g25_256mb_defconfig | 36
> ++++++++++++++-----------
> >  5 files changed, 58 insertions(+), 44 deletions(-)
>
> Applied to master, thanks.
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20160923/61207120/attachment.html>

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-09-23  8:01 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-22 14:43 [Buildroot] [PATCH 1/1] configs/acmesystems_arietta_g25: update kernel and at91bootstrap3 Biagio Montaruli
2016-09-22 15:17 ` Angelo Compagnucci
2016-09-23  6:07 ` Thomas Petazzoni
2016-09-23  8:01   ` Biagio Montaruli

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.