* Re: Bug reports on the psb-gfx driver
2012-04-17 11:25 ` Bug reports on the psb-gfx driver Kristoffer Eriksson
@ 2012-04-17 12:35 ` Håvar Nøvik
2012-04-18 21:21 ` Alan Cox
0 siblings, 1 reply; 6+ messages in thread
From: Håvar Nøvik @ 2012-04-17 12:35 UTC (permalink / raw)
To: Kristoffer Eriksson; +Cc: linux-kernel, dri-devel, alan
[-- Attachment #1.1: Type: text/plain, Size: 1072 bytes --]
>
> Håvar Nøvik skrev 2012-04-17 12:53:
>
>> Hi,
>>
>> Greetings,
> I'm experiencing a bug with the driver after a kernel upgrade (3.2 ->
>> 3.3). Every once in a while the screen is blacking out for a second or two.
>>
>> Anyways, I was wondering where I could look at bug reports or report a
>> new one if I can't find a similar?
>>
>> Ive done a fresh build and Im seeing that same issue that you are
> describing. In a frequency of about 5-15mins it blackens and then returns
> within 1-2 seconds. Could you give us a dmesg output? I will do some
> bugtracking once I get back to my laptop.
> Alan, any thoughts?
That frequency seems about the same as the one I'm experiences. All though
some times it's more often, but I can't say I've done anything special at
the same time.
3.3.2-1-ARCH
Intel(R) Atom(TM) CPU Z520 @ 1.33GHz
Attachment: dmesg ouput
>
> PS: Thanks for the great work on a GMA 500 driver!
>
>>
>> Alan is the one to thank. :)
>
Thanks to Alan, then :D
> ----
>> Regards Håvar Nøvik
>>
>
>
[-- Attachment #1.2: Type: text/html, Size: 2214 bytes --]
[-- Attachment #2: dmesg.log --]
[-- Type: application/octet-stream, Size: 46684 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097000 (usable)
[ 0.000000] BIOS-e820: 0000000000097000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6b0000 - 000000007f6bc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6bc000 - 000000007f6bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6bf000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: Acer AO751h /JV11-ML , BIOS V0.3212 02/26/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f8260] f8260
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c0093000] 93000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 7f426000 - 7f6a0000
[ 0.000000] Allocated new RAMDISK: 37584000 - 377fd6d2
[ 0.000000] Move RAMDISK from 000000007f426000 - 000000007f69f6d1 to 37584000 - 377fd6d1
[ 0.000000] ACPI: RSDP 000f8230 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7f6b3cdd 0006C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6bbc3a 000F4 (v03 INTEL POULSBO 06040000 INTC 00000032)
[ 0.000000] ACPI: DSDT 7f6b4c08 06FBE (v01 INTEL POULSBO 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 7f6befc0 00040
[ 0.000000] ACPI: HPET 7f6bbd2e 00038 (v01 INTEL POULSBO 06040000 INTC 00000032)
[ 0.000000] ACPI: MCFG 7f6bbd66 0003C (v01 INTEL POULSBO 06040000 INTC 00000032)
[ 0.000000] ACPI: TCPA 7f6bbda2 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 7f6bbdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 7f6bbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f6bbe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 7f6bbe8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000)
[ 0.000000] ACPI: SSDT 7f6b3d49 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x0007f6b0
[ 0.000000] On node 0 totalpages: 521783
[ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6593200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3943 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292276 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s30848 r0 d22400 u2097152
[ 0.000000] pcpu-alloc: s30848 r0 d22400 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517705
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/7dac7b0b-1cbd-4e03-896c-980bcf0136dc resume=/dev/disk/by-uuid/cfa655f9-0997-4f87-b713-96e25dbf8075 ro 5
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4175104 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6b0)
[ 0.000000] Memory: 2056564k/2087616k available (3773k kernel code, 30568k reserved, 1435k data, 520k init, 1178312k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
[ 0.000000] .data : 0xc04af7a9 - 0xc0616400 (1435 kB)
[ 0.000000] .text : 0xc0100000 - 0xc04af7a9 (3773 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1330.066 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2661.97 BogoMIPS (lpj=4433553)
[ 0.003351] pid_max: default: 32768 minimum: 301
[ 0.003421] Security Framework initialized
[ 0.003431] AppArmor: AppArmor disabled by boot time parameter
[ 0.003484] Mount-cache hash table entries: 512
[ 0.003832] Initializing cgroup subsys cpuacct
[ 0.003841] Initializing cgroup subsys memory
[ 0.003864] Initializing cgroup subsys devices
[ 0.003872] Initializing cgroup subsys freezer
[ 0.003878] Initializing cgroup subsys net_cls
[ 0.003885] Initializing cgroup subsys blkio
[ 0.003949] CPU: Physical Processor ID: 0
[ 0.003955] CPU: Processor Core ID: 0
[ 0.003963] mce: CPU supports 5 MCE banks
[ 0.003982] CPU0: Thermal monitoring enabled (TM1)
[ 0.003992] using mwait in idle threads.
[ 0.008168] ACPI: Core revision 20120111
[ 0.019075] ftrace: allocating 16621 entries in 33 pages
[ 0.036800] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.037206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071355] CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz stepping 02
[ 0.073329] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.073329] ... version: 3
[ 0.073329] ... bit width: 40
[ 0.073329] ... generic registers: 2
[ 0.073329] ... value mask: 000000ffffffffff
[ 0.073329] ... max period: 000000007fffffff
[ 0.073329] ... fixed-purpose events: 3
[ 0.073329] ... event mask: 0000000700000003
[ 0.090317] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.116745] CPU 1 irqstacks, hard=f58c0000 soft=f58c2000
[ 0.116757] Booting Node 0, Processors #1 Ok.
[ 0.116770] smpboot cpu 1: start_ip = 93000
[ 0.006666] Initializing CPU#1
[ 0.130082] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136684] Brought up 2 CPUs
[ 0.136700] Total of 2 processors activated (5322.94 BogoMIPS).
[ 0.137398] devtmpfs: initialized
[ 0.137398] PM: Registering ACPI NVS region at 7f6bc000 (12288 bytes)
[ 0.140665] NET: Registered protocol family 16
[ 0.141056] ACPI: bus type pci registered
[ 0.141257] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.141268] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.141274] PCI: Using MMCONFIG for extended config space
[ 0.141279] PCI: Using configuration type 1 for base access
[ 0.143438] bio: create slab <bio-0> at 0
[ 0.143488] ACPI: Added _OSI(Module Device)
[ 0.143488] ACPI: Added _OSI(Processor Device)
[ 0.143488] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143488] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146170] ACPI: EC: Look up EC in DSDT
[ 0.153508] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.155752] ACPI: SSDT 7f6b4931 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.156444] ACPI: Dynamic OEM Table Load:
[ 0.156454] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.156903] ACPI: SSDT 7f6b4225 00687 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.157547] ACPI: Dynamic OEM Table Load:
[ 0.157556] ACPI: SSDT (null) 00687 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.158226] ACPI: SSDT 7f6b4b34 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.158905] ACPI: Dynamic OEM Table Load:
[ 0.158914] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.159169] ACPI: SSDT 7f6b48ac 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.159814] ACPI: Dynamic OEM Table Load:
[ 0.159823] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.186880] ACPI: Interpreter enabled
[ 0.186902] ACPI: (supports S0 S3 S4 S5)
[ 0.186954] ACPI: Using IOAPIC for interrupt routing
[ 0.197936] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
[ 0.198335] ACPI: No dock devices found.
[ 0.198352] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.198565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.198867] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.198877] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.198886] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.198894] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.198902] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff]
[ 0.198910] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.198919] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfebfffff]
[ 0.198934] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d0000-0x000fffff])
[ 0.199067] PCI host bridge to bus 0000:00
[ 0.199076] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.199083] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.199091] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.199098] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[ 0.199106] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.199114] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfebfffff]
[ 0.199145] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600
[ 0.199242] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300
[ 0.199272] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
[ 0.199288] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.199304] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff]
[ 0.199320] pci 0000:00:02.0: reg 1c: [mem 0xb0000000-0xb003ffff]
[ 0.199459] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403
[ 0.199485] pci 0000:00:1b.0: reg 10: [mem 0xb0050000-0xb0053fff 64bit]
[ 0.199569] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.199608] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604
[ 0.199697] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.199736] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604
[ 0.199825] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.199866] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03
[ 0.199918] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.199967] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03
[ 0.200037] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.200087] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03
[ 0.200139] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.200204] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03
[ 0.200239] pci 0000:00:1d.7: reg 10: [mem 0xb0054000-0xb00543ff]
[ 0.200374] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.200412] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601
[ 0.200504] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101
[ 0.200555] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.200674] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.200701] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.200741] pci 0000:02:00.0: reg 18: [mem 0xd0110000-0xd0110fff 64bit pref]
[ 0.200769] pci 0000:02:00.0: reg 20: [mem 0xd0100000-0xd010ffff 64bit pref]
[ 0.200790] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.200874] pci 0000:02:00.0: supports D1 D2
[ 0.200881] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206705] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.206723] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.206742] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff pref]
[ 0.206853] pci 0000:03:00.0: [168c:001c] type 0 class 0x000200
[ 0.206900] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit]
[ 0.207068] pci 0000:03:00.0: supports D1 D2
[ 0.207075] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207113] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.207133] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.207145] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.207168] pci_bus 0000:00: on NUMA node 0
[ 0.207179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.207497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.207639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.207836] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.207847] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.207854] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.213855] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.214013] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.214166] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.214317] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.214469] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.214628] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.214783] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.214935] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.215123] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.215123] vgaarb: loaded
[ 0.215123] vgaarb: bridge control possible 0000:00:02.0
[ 0.215123] PCI: Using ACPI for IRQ routing
[ 0.224595] PCI: pci_cache_line_size set to 64 bytes
[ 0.224688] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.224697] reserve RAM buffer: 0000000000097000 - 000000000009ffff
[ 0.224705] reserve RAM buffer: 000000007f6b0000 - 000000007fffffff
[ 0.225045] NetLabel: Initializing
[ 0.225052] NetLabel: domain hash size = 128
[ 0.225056] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.225092] NetLabel: unlabeled traffic allowed by default
[ 0.225104] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.225114] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.225127] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.236699] Switching to clocksource hpet
[ 0.255607] pnp: PnP ACPI init
[ 0.255667] ACPI: bus type pnp registered
[ 0.255994] pnp 00:00: [bus 00-ff]
[ 0.256004] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.256012] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.256019] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.256027] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.256034] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.256042] pnp 00:00: [mem 0x000e0000-0x000effff window]
[ 0.256049] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.256057] pnp 00:00: [mem 0x7f800000-0xfebfffff window]
[ 0.256207] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.256310] pnp 00:01: [mem 0xfd000000-0xfd003fff]
[ 0.256319] pnp 00:01: [mem 0x3f800000-0xafffffff]
[ 0.256326] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.256333] pnp 00:01: [mem 0xfed00000-0xfed3ffff]
[ 0.256340] pnp 00:01: [mem 0xfed45000-0xfed4bfff]
[ 0.256475] system 00:01: [mem 0xfd000000-0xfd003fff] has been reserved
[ 0.256485] system 00:01: [mem 0x3f800000-0xafffffff] could not be reserved
[ 0.256495] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.256504] system 00:01: [mem 0xfed00000-0xfed3ffff] could not be reserved
[ 0.256513] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.256524] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257077] pnp 00:02: [io 0x0000-0x001f]
[ 0.257086] pnp 00:02: [io 0x0081-0x0091]
[ 0.257092] pnp 00:02: [io 0x0093-0x009f]
[ 0.257099] pnp 00:02: [io 0x00c0-0x00df]
[ 0.257106] pnp 00:02: [dma 4]
[ 0.257218] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.257320] pnp 00:03: [irq 0 disabled]
[ 0.257347] pnp 00:03: [irq 8]
[ 0.257354] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.257464] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.257503] pnp 00:04: [io 0x00f0]
[ 0.257518] pnp 00:04: [irq 13]
[ 0.257635] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.257688] pnp 00:05: [io 0x002e-0x002f]
[ 0.257696] pnp 00:05: [io 0x0050-0x0052]
[ 0.257702] pnp 00:05: [io 0x0061]
[ 0.257708] pnp 00:05: [io 0x0063]
[ 0.257714] pnp 00:05: [io 0x0065]
[ 0.257720] pnp 00:05: [io 0x0067]
[ 0.257726] pnp 00:05: [io 0x0068]
[ 0.257736] pnp 00:05: [io 0x006a]
[ 0.257742] pnp 00:05: [io 0x006c]
[ 0.257748] pnp 00:05: [io 0x006e]
[ 0.257754] pnp 00:05: [io 0x0070]
[ 0.257760] pnp 00:05: [io 0x0074-0x0077]
[ 0.257767] pnp 00:05: [io 0x0080]
[ 0.257772] pnp 00:05: [io 0x0092]
[ 0.257779] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.257785] pnp 00:05: [io 0x0110-0x012e]
[ 0.257792] pnp 00:05: [io 0x0374-0x0375]
[ 0.257798] pnp 00:05: [io 0x03f4-0x03f5]
[ 0.257804] pnp 00:05: [io 0x0680-0x069f]
[ 0.257811] pnp 00:05: [io 0x8080]
[ 0.257817] pnp 00:05: [io 0x1000-0x107f]
[ 0.257823] pnp 00:05: [io 0x1180-0x11bf]
[ 0.257830] pnp 00:05: [io 0x1640-0x164f]
[ 0.257836] pnp 00:05: [io 0xfe00]
[ 0.258012] system 00:05: [io 0x0110-0x012e] has been reserved
[ 0.258022] system 00:05: [io 0x0374-0x0375] has been reserved
[ 0.258030] system 00:05: [io 0x03f4-0x03f5] has been reserved
[ 0.258039] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.258047] system 00:05: [io 0x8080] has been reserved
[ 0.258055] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.258064] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.258072] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.258080] system 00:05: [io 0xfe00] has been reserved
[ 0.258091] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.258169] pnp 00:06: [io 0x0070-0x0073]
[ 0.258289] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.258329] pnp 00:07: [io 0x0060]
[ 0.258335] pnp 00:07: [io 0x0064]
[ 0.258350] pnp 00:07: [irq 1]
[ 0.258463] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.258504] pnp 00:08: [irq 12]
[ 0.258622] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.258661] pnp: PnP ACPI: found 9 devices
[ 0.258666] ACPI: ACPI bus type pnp unregistered
[ 0.301556] PCI: max bus depth: 1 pci_try_num: 2
[ 0.301596] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x800fffff]
[ 0.301609] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80100000-0x802fffff pref]
[ 0.301622] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.301634] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80300000-0x807fffff]
[ 0.301645] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0120000-0xd012ffff pref]
[ 0.301653] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.301662] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.301674] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x807fffff]
[ 0.301684] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff pref]
[ 0.301697] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.301705] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.301716] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.301726] pci 0000:00:1c.1: bridge window [mem 0x80100000-0x802fffff pref]
[ 0.301788] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.301823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.301831] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.301839] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301847] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
[ 0.301855] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.301863] pci_bus 0000:00: resource 9 [mem 0x7f800000-0xfebfffff]
[ 0.301871] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.301878] pci_bus 0000:02: resource 1 [mem 0x80300000-0x807fffff]
[ 0.301887] pci_bus 0000:02: resource 2 [mem 0xd0100000-0xd01fffff pref]
[ 0.301895] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.301902] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.301910] pci_bus 0000:03: resource 2 [mem 0x80100000-0x802fffff pref]
[ 0.302014] NET: Registered protocol family 2
[ 0.302192] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.302874] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304111] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.304758] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.304766] TCP reno registered
[ 0.304777] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.304804] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.305083] NET: Registered protocol family 1
[ 0.305135] pci 0000:00:02.0: Boot video device
[ 0.305408] PCI: CLS 64 bytes, default 64
[ 0.305558] Unpacking initramfs...
[ 0.453219] Freeing initrd memory: 2536k freed
[ 0.456539] Simple Boot Flag at 0x36 set to 0x1
[ 0.457369] apm: BIOS not found.
[ 0.458042] audit: initializing netlink socket (disabled)
[ 0.458072] type=2000 audit(1334660847.456:1): initialized
[ 0.458918] highmem bounce pool size: 64 pages
[ 0.458933] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.465039] VFS: Disk quotas dquot_6.5.2
[ 0.465226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.465505] msgmni has been set to 1720
[ 0.466110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.466215] io scheduler noop registered
[ 0.466224] io scheduler deadline registered
[ 0.466248] io scheduler cfq registered (default)
[ 0.466923] intel_idle: MWAIT substates: 0x3020220
[ 0.466948] intel_idle: v0.4 model 0x1C
[ 0.466954] intel_idle: lapic_timer_reliable_states 0x2
[ 0.466960] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.467052] GHES: HEST is not enabled!
[ 0.467095] isapnp: Scanning for PnP cards...
[ 0.824282] isapnp: No Plug & Play device found
[ 0.824501] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.826120] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.833665] i8042: Detected active multiplexing controller, rev 1.1
[ 0.837332] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.837439] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.837535] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.837625] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.837720] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.838126] mousedev: PS/2 mouse device common for all mice
[ 0.838322] rtc_cmos 00:06: RTC can wake from S4
[ 0.838583] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.838624] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.838841] cpuidle: using governor ladder
[ 0.839051] cpuidle: using governor menu
[ 0.839720] TCP cubic registered
[ 0.840146] NET: Registered protocol family 10
[ 0.841605] NET: Registered protocol family 17
[ 0.841620] Registering the dns_resolver key type
[ 0.841672] Using IPI No-Shortcut mode
[ 0.842081] PM: Checking hibernation image partition /dev/disk/by-uuid/cfa655f9-0997-4f87-b713-96e25dbf8075
[ 0.860380] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.870067] PM: Hibernation image not present or could not be loaded.
[ 0.870135] registered taskstats version 1
[ 0.871198] rtc_cmos 00:06: setting system clock to 2012-04-17 11:07:28 UTC (1334660848)
[ 0.871387] Initializing network drop monitor service
[ 0.871637] Freeing unused kernel memory: 520k freed
[ 0.872156] Write protecting the kernel text: 3776k
[ 0.872228] Write protecting the kernel read-only data: 1108k
[ 0.896110] udevd[37]: starting version 182
[ 1.020382] usbcore: registered new interface driver usbfs
[ 1.020474] usbcore: registered new interface driver hub
[ 1.025543] usbcore: registered new device driver usb
[ 1.030919] SCSI subsystem initialized
[ 1.035894] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.036068] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.036083] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.036176] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.036261] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.046588] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.046656] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xb0054000
[ 1.051863] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.052073] libata version 3.00 loaded.
[ 1.056779] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.059370] hub 1-0:1.0: USB hub found
[ 1.059394] hub 1-0:1.0: 8 ports detected
[ 1.060878] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.060894] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.060943] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.061038] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.062884] hub 2-0:1.0: USB hub found
[ 1.062910] hub 2-0:1.0: 2 ports detected
[ 1.063392] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.063406] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.063449] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.063560] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.065407] hub 3-0:1.0: USB hub found
[ 1.065430] hub 3-0:1.0: 2 ports detected
[ 1.065742] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.065757] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.065798] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.065869] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.067477] hub 4-0:1.0: USB hub found
[ 1.067493] hub 4-0:1.0: 2 ports detected
[ 1.067720] pata_sch 0000:00:1f.1: version 0.2
[ 1.067819] pata_sch 0000:00:1f.1: setting latency timer to 64
[ 1.072682] scsi0 : pata_sch
[ 1.073764] scsi1 : pata_sch
[ 1.074942] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.074956] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.234310] ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
[ 1.234323] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.247666] ata1.00: configured for UDMA/100
[ 1.248251] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[ 1.363651] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 1.422463] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.422759] sd 0:0:0:0: [sda] Write Protect is off
[ 1.422772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.422899] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.430541] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1.507409] sda: sda1 < sda5 sda6 sda7 sda8 sda9 > sda2 sda3
[ 1.510388] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.660285] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 1.727160] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 2.093448] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.285184] usb 3-2: not running at top speed; connect to a high speed hub
[ 2.569245] PM: Starting manual resume from disk
[ 2.569255] PM: Hibernation image partition 8:8 present
[ 2.569260] PM: Looking for hibernation image.
[ 2.569901] PM: Image not found (code -22)
[ 2.569911] PM: Hibernation image not present or could not be loaded.
[ 2.681827] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.580373] udevd[117]: starting version 182
[ 5.946641] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 5.947130] ACPI: Lid Switch [LID]
[ 5.947401] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.947423] ACPI: Power Button [PWRB]
[ 5.947636] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.947653] ACPI: Sleep Button [SLPB]
[ 5.947923] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.947941] ACPI: Power Button [PWRF]
[ 5.947958] ACPI Error: Could not enable PowerButton event (20120111/evxfevnt-199)
[ 5.947975] ACPI Warning: Could not enable fixed event 0x2 (20120111/evxface-198)
[ 5.949741] button: probe of LNXPWRBN:00 failed with error -22
[ 6.324937] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.324949] ACPI: Thermal Zone [THRM] (29 C)
[ 6.348442] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120111/utaddress-251)
[ 6.348467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.348620] lpc_sch: probe of 0000:00:1f.0 failed with error -16
[ 6.403763] ACPI: AC Adapter [ACAD] (off-line)
[ 6.413607] ACPI: Battery Slot [BAT1] (battery present)
[ 6.419169] wmi: Mapper loaded
[ 6.438623] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.438801] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
[ 6.440521] r8169 0000:02:00.0: eth0: RTL8102e at 0xf85a8000, 00:23:8b:e5:6f:d1, XID 04c00000 IRQ 40
[ 6.479179] cfg80211: Calling CRDA to update world regulatory domain
[ 6.611511] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 6.611530] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 6.694619] ath5k 0000:03:00.0: enabling device (0004 -> 0006)
[ 6.694738] ath5k 0000:03:00.0: registered as 'phy0'
[ 6.700346] Linux agpgart interface v0.103
[ 6.732472] [drm] Initialized drm 1.1.0 20060810
[ 6.977308] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.996196] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.996621] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.021411] gma500 0000:00:02.0: setting latency timer to 64
[ 7.025233] ioremap error for 0x7f6bc000-0x7f6bf000, requested 0x10, got 0x0
[ 7.025704] Stolen memory information
[ 7.025712] base in RAM: 0x7f800000
[ 7.025720] size: 7932K, calculated by (GTT RAM base) - (Stolen base), seems wrong
[ 7.025729] the correct size should be: 8M(dvmt mode=3)
[ 7.030036] Set up 1983 stolen pages starting at 0x7f800000, GTT offset 0K
[ 7.030311] [drm] SGX core id = 0x01130000
[ 7.030319] [drm] SGX core rev major = 0x01, minor = 0x02
[ 7.030327] [drm] SGX core rev maintenance = 0x01, designer = 0x00
[ 7.051771] acpi device:03: registered as cooling_device2
[ 7.088579] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 7.089292] acer_wmi: Function bitmap for Communication Device: 0x17
[ 7.089310] acer_wmi: Brightness must be controlled by generic video driver
[ 7.100496] acpi device:05: registered as cooling_device3
[ 7.150435] acpi device:06: registered as cooling_device4
[ 7.150909] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 7.151250] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.151368] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.151378] [drm] No driver support for vblank timestamp query.
[ 7.279109] ath: EEPROM regdomain: 0x65
[ 7.279119] ath: EEPROM indicates we should expect a direct regpair map
[ 7.279131] ath: Country alpha2 being used: 00
[ 7.279138] ath: Regpair used: 0x65
[ 7.329875] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.333150] Registered led device: ath5k-phy0::rx
[ 7.333427] Registered led device: ath5k-phy0::tx
[ 7.333470] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 7.337023] Linux media interface: v0.10
[ 7.379439] Linux video capture interface: v2.00
[ 7.382820] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 7.428499] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 7.496874] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[ 7.520581] input: WebCam as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input10
[ 7.520839] usbcore: registered new interface driver uvcvideo
[ 7.520848] USB Video Class driver (1.1.1)
[ 8.614426] gma500 0000:00:02.0: allocated 1366x768 fb
[ 8.614689] fbcon: psbfb (fb0) is primary device
[ 8.807352] Console: switching to colour frame buffer device 170x48
[ 8.822664] fb0: psbfb frame buffer device
[ 8.822670] drm: registered panic notifier
[ 8.822813] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[ 8.822829] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 9.219891] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 9.365347] REISERFS (device sda6): found reiserfs format "3.6" with standard journal
[ 9.365402] REISERFS (device sda6): using ordered data mode
[ 9.365414] reiserfs: using flush barriers
[ 9.370952] REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 9.372595] REISERFS (device sda6): checking transaction log (sda6)
[ 9.441161] REISERFS (device sda6): Using r5 hash to sort names
[ 9.511600] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.641105] fuse init (API version 7.18)
[ 10.094468] Adding 1951860k swap on /dev/sda8. Priority:-1 extents:1 across:1951860k
[ 19.530599] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.093793] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[ 25.237117] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[ 26.146362] r8169 0000:02:00.0: eth0: link down
[ 26.148388] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.589299] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.660388] r8169 0000:02:00.0: eth0: link down
[ 30.661027] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.711699] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.911862] wlan0: deauthenticating from 00:21:1b:eb:4e:d2 by local choice (reason=2)
[ 33.925643] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 33.927854] wlan0: authenticated
[ 33.936724] wlan0: associate with 00:21:1b:eb:4e:d2 (try 1)
[ 33.940093] wlan0: RX AssocResp from 00:21:1b:eb:4e:d2 (capab=0x431 status=0 aid=7)
[ 33.940117] wlan0: associated
[ 33.940143] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 33.940158] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 33.941854] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 34.159246] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 3
[ 44.056711] wlan0: no IPv6 routers present
[ 84.757371] EXT4-fs (sda5): re-mounted. Opts: commit=600
[ 85.010745] EXT4-fs (sda7): re-mounted. Opts: commit=600
[ 286.463162] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 286.634176] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 289.007999] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 304.016414] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 304.016428] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 304.016437] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 0
[ 304.026810] cfg80211: Calling CRDA for country: NO
[ 305.075756] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 305.077881] wlan0: authenticated
[ 305.087042] wlan0: associate with 00:21:1b:eb:4e:d2 (try 1)
[ 305.090205] wlan0: RX ReassocResp from 00:21:1b:eb:4e:d2 (capab=0x431 status=0 aid=1)
[ 305.090226] wlan0: associated
[ 305.090245] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 305.090259] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 305.243957] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 3
[ 914.010356] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 914.010368] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 914.010377] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 0
[ 914.024265] cfg80211: Calling CRDA to update world regulatory domain
[ 915.075474] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 915.077972] wlan0: authenticated
[ 915.086762] wlan0: associate with 00:21:1b:eb:4e:d2 (try 1)
[ 915.090430] wlan0: RX ReassocResp from 00:21:1b:eb:4e:d2 (capab=0x431 status=0 aid=1)
[ 915.090448] wlan0: associated
[ 915.090467] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 915.090475] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 915.263849] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 3
[ 2122.008151] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 2122.008164] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 2122.008173] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 0
[ 2122.040850] cfg80211: Calling CRDA to update world regulatory domain
[ 2123.079509] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 2123.080767] wlan0: authenticated
[ 2123.089543] wlan0: associate with 00:21:1b:eb:4e:d2 (try 1)
[ 2123.092199] wlan0: RX ReassocResp from 00:21:1b:eb:4e:d2 (capab=0x431 status=0 aid=1)
[ 2123.092310] wlan0: associated
[ 2123.092321] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 2123.092328] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 2123.280300] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 3
[ 2726.046500] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 2726.046512] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 2726.046522] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 0
[ 2726.070853] cfg80211: Calling CRDA for country: NO
[ 2727.118415] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 2727.119658] wlan0: authenticated
[ 2727.130010] wlan0: associate with 00:21:1b:eb:4e:d2 (try 1)
[ 2727.133250] wlan0: RX ReassocResp from 00:21:1b:eb:4e:d2 (capab=0x431 status=0 aid=1)
[ 2727.133269] wlan0: associated
[ 2727.133288] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 2727.133301] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 2727.309005] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 3
[ 3810.201829] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[ 3810.470569] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[ 3810.494007] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[ 3857.999834] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 3857.999846] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 3857.999852] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 0
[ 3858.010996] cfg80211: Calling CRDA to update world regulatory domain
[ 3858.241485] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3858.298939] r8169 0000:02:00.0: eth0: link down
[ 3858.299493] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3863.064876] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3865.879088] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3865.935190] r8169 0000:02:00.0: eth0: link down
[ 3865.935752] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3865.987583] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3868.198566] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 3868.198768] wlan0: deauthenticating from 00:21:1b:eb:4e:d2 by local choice (reason=2)
[ 3868.198963] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 3868.200508] wlan0: authenticated
[ 3868.320866] wlan0: associate with 00:21:1b:eb:4e:d2 (try 1)
[ 3868.325945] wlan0: RX AssocResp from 00:21:1b:eb:4e:d2 (capab=0x431 status=0 aid=7)
[ 3868.325957] wlan0: associated
[ 3868.325968] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 3868.325975] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 3868.327367] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3868.449185] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 3
[ 3878.763076] wlan0: no IPv6 routers present
[ 4802.012984] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 4802.012996] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 4802.013005] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 0
[ 4802.033089] cfg80211: Calling CRDA for country: NO
[ 4802.256196] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4802.314073] r8169 0000:02:00.0: eth0: link down
[ 4802.314637] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4807.068090] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4809.493917] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4809.551036] r8169 0000:02:00.0: eth0: link down
[ 4809.551592] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4809.603713] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4811.808873] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 4811.809075] wlan0: deauthenticating from 00:21:1b:eb:4e:d2 by local choice (reason=2)
[ 4811.809283] wlan0: authenticate with 00:21:1b:eb:4e:d2 (try 1)
[ 4811.810898] wlan0: authenticated
[ 4811.823826] wlan0: associate with 00:21:1b:eb:4e:d2 (try 1)
[ 4811.829094] wlan0: RX AssocResp from 00:21:1b:eb:4e:d2 (capab=0x431 status=0 aid=9)
[ 4811.829110] wlan0: associated
[ 4811.829124] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 1
[ 4811.829134] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 2
[ 4811.830602] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4812.778182] wlan0: moving STA 00:21:1b:eb:4e:d2 to state 3
[ 4822.589586] wlan0: no IPv6 routers present
[ 7659.165215] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[ 7659.177126] gma500 0000:00:02.0: Backlight lvds set brightness 186a186a
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread