[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Caesar Wang]

Update the cpu opp table for rk3399 op1.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

 arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index dd82e16..92bd615 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -52,27 +52,27 @@
 		};
 		opp01 {
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000>;
 		};
 		opp02 {
 			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <850000>;
 		};
 		opp03 {
 			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <875000>;
+			opp-microvolt = <900000>;
 		};
 		opp04 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <925000>;
+			opp-microvolt = <975000>;
 		};
 		opp05 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1050000>;
+			opp-microvolt = <1100000>;
 		};
 		opp06 {
 			opp-hz = /bits/ 64 <1512000000>;
-			opp-microvolt = <1125000>;
+			opp-microvolt = <1150000>;
 		};
 	};
 
-- 
2.7.4

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Caesar Wang]

Update the cpu opp table for rk3399 op1.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---

 arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index dd82e16..92bd615 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -52,27 +52,27 @@
 		};
 		opp01 {
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000>;
 		};
 		opp02 {
 			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <850000>;
 		};
 		opp03 {
 			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <875000>;
+			opp-microvolt = <900000>;
 		};
 		opp04 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <925000>;
+			opp-microvolt = <975000>;
 		};
 		opp05 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1050000>;
+			opp-microvolt = <1100000>;
 		};
 		opp06 {
 			opp-hz = /bits/ 64 <1512000000>;
-			opp-microvolt = <1125000>;
+			opp-microvolt = <1150000>;
 		};
 	};
 
-- 
2.7.4

Re: [PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stübner]

Hi Caesar,

Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> Update the cpu opp table for rk3399 op1.

Ideally this should contain something about the "why".
Are these new voltage settings safer to operate under?

No need to resend, please just clarify the reason.


Thanks
Heiko

> 
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index dd82e16..92bd615
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
> @@ -52,27 +52,27 @@
>  		};
>  		opp01 {
>  			opp-hz = /bits/ 64 <600000000>;
> -			opp-microvolt = <800000>;
> +			opp-microvolt = <825000>;
>  		};
>  		opp02 {
>  			opp-hz = /bits/ 64 <816000000>;
> -			opp-microvolt = <800000>;
> +			opp-microvolt = <850000>;
>  		};
>  		opp03 {
>  			opp-hz = /bits/ 64 <1008000000>;
> -			opp-microvolt = <875000>;
> +			opp-microvolt = <900000>;
>  		};
>  		opp04 {
>  			opp-hz = /bits/ 64 <1200000000>;
> -			opp-microvolt = <925000>;
> +			opp-microvolt = <975000>;
>  		};
>  		opp05 {
>  			opp-hz = /bits/ 64 <1416000000>;
> -			opp-microvolt = <1050000>;
> +			opp-microvolt = <1100000>;
>  		};
>  		opp06 {
>  			opp-hz = /bits/ 64 <1512000000>;
> -			opp-microvolt = <1125000>;
> +			opp-microvolt = <1150000>;
>  		};
>  	};

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stübner]

Hi Caesar,

Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> Update the cpu opp table for rk3399 op1.

Ideally this should contain something about the "why".
Are these new voltage settings safer to operate under?

No need to resend, please just clarify the reason.


Thanks
Heiko

> 
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index dd82e16..92bd615
> 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
> @@ -52,27 +52,27 @@
>  		};
>  		opp01 {
>  			opp-hz = /bits/ 64 <600000000>;
> -			opp-microvolt = <800000>;
> +			opp-microvolt = <825000>;
>  		};
>  		opp02 {
>  			opp-hz = /bits/ 64 <816000000>;
> -			opp-microvolt = <800000>;
> +			opp-microvolt = <850000>;
>  		};
>  		opp03 {
>  			opp-hz = /bits/ 64 <1008000000>;
> -			opp-microvolt = <875000>;
> +			opp-microvolt = <900000>;
>  		};
>  		opp04 {
>  			opp-hz = /bits/ 64 <1200000000>;
> -			opp-microvolt = <925000>;
> +			opp-microvolt = <975000>;
>  		};
>  		opp05 {
>  			opp-hz = /bits/ 64 <1416000000>;
> -			opp-microvolt = <1050000>;
> +			opp-microvolt = <1100000>;
>  		};
>  		opp06 {
>  			opp-hz = /bits/ 64 <1512000000>;
> -			opp-microvolt = <1125000>;
> +			opp-microvolt = <1150000>;
>  		};
>  	};

Re: [PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Caesar Wang]

在 2017年04月24日 16:26, Heiko Stübner 写道:
> Hi Caesar,
>
> Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
>> Update the cpu opp table for rk3399 op1.
> Ideally this should contain something about the "why".
> Are these new voltage settings safer to operate under?

The before opp table is for earlier batch of rk3399 SoCs,  that's no 
enough for the current and
newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need 
to little voltages changed.

-Caesar

>
> No need to resend, please just clarify the reason.
>
>
> Thanks
> Heiko
>
>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>> ---
>>
>>   arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 12 ++++++------
>>   1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>> b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index dd82e16..92bd615
>> 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>> @@ -52,27 +52,27 @@
>>   		};
>>   		opp01 {
>>   			opp-hz = /bits/ 64 <600000000>;
>> -			opp-microvolt = <800000>;
>> +			opp-microvolt = <825000>;
>>   		};
>>   		opp02 {
>>   			opp-hz = /bits/ 64 <816000000>;
>> -			opp-microvolt = <800000>;
>> +			opp-microvolt = <850000>;
>>   		};
>>   		opp03 {
>>   			opp-hz = /bits/ 64 <1008000000>;
>> -			opp-microvolt = <875000>;
>> +			opp-microvolt = <900000>;
>>   		};
>>   		opp04 {
>>   			opp-hz = /bits/ 64 <1200000000>;
>> -			opp-microvolt = <925000>;
>> +			opp-microvolt = <975000>;
>>   		};
>>   		opp05 {
>>   			opp-hz = /bits/ 64 <1416000000>;
>> -			opp-microvolt = <1050000>;
>> +			opp-microvolt = <1100000>;
>>   		};
>>   		opp06 {
>>   			opp-hz = /bits/ 64 <1512000000>;
>> -			opp-microvolt = <1125000>;
>> +			opp-microvolt = <1150000>;
>>   		};
>>   	};
>
>
>
>

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Caesar Wang]

? 2017?04?24? 16:26, Heiko St?bner ??:
> Hi Caesar,
>
> Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
>> Update the cpu opp table for rk3399 op1.
> Ideally this should contain something about the "why".
> Are these new voltage settings safer to operate under?

The before opp table is for earlier batch of rk3399 SoCs,  that's no 
enough for the current and
newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need 
to little voltages changed.

-Caesar

>
> No need to resend, please just clarify the reason.
>
>
> Thanks
> Heiko
>
>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>> ---
>>
>>   arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 12 ++++++------
>>   1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>> b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index dd82e16..92bd615
>> 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>> @@ -52,27 +52,27 @@
>>   		};
>>   		opp01 {
>>   			opp-hz = /bits/ 64 <600000000>;
>> -			opp-microvolt = <800000>;
>> +			opp-microvolt = <825000>;
>>   		};
>>   		opp02 {
>>   			opp-hz = /bits/ 64 <816000000>;
>> -			opp-microvolt = <800000>;
>> +			opp-microvolt = <850000>;
>>   		};
>>   		opp03 {
>>   			opp-hz = /bits/ 64 <1008000000>;
>> -			opp-microvolt = <875000>;
>> +			opp-microvolt = <900000>;
>>   		};
>>   		opp04 {
>>   			opp-hz = /bits/ 64 <1200000000>;
>> -			opp-microvolt = <925000>;
>> +			opp-microvolt = <975000>;
>>   		};
>>   		opp05 {
>>   			opp-hz = /bits/ 64 <1416000000>;
>> -			opp-microvolt = <1050000>;
>> +			opp-microvolt = <1100000>;
>>   		};
>>   		opp06 {
>>   			opp-hz = /bits/ 64 <1512000000>;
>> -			opp-microvolt = <1125000>;
>> +			opp-microvolt = <1150000>;
>>   		};
>>   	};
>
>
>
>

Re: [PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stübner]

Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
> 在 2017年04月24日 16:26, Heiko Stübner 写道:
> > Hi Caesar,
> > 
> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> >> Update the cpu opp table for rk3399 op1.
> > 
> > Ideally this should contain something about the "why".
> > Are these new voltage settings safer to operate under?
> 
> The before opp table is for earlier batch of rk3399 SoCs,  that's no
> enough for the current and
> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
> to little voltages changed.

just to make sure, this is also safe for all the non-chromebook rk3399 socs 
(like the firefly and tv-boxes, etc), right?


Thanks
Heiko

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stübner]

Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
> ? 2017?04?24? 16:26, Heiko St?bner ??:
> > Hi Caesar,
> > 
> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> >> Update the cpu opp table for rk3399 op1.
> > 
> > Ideally this should contain something about the "why".
> > Are these new voltage settings safer to operate under?
> 
> The before opp table is for earlier batch of rk3399 SoCs,  that's no
> enough for the current and
> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
> to little voltages changed.

just to make sure, this is also safe for all the non-chromebook rk3399 socs 
(like the firefly and tv-boxes, etc), right?


Thanks
Heiko

Re: [PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Eddie Cai]

Hi Heiko

2017-04-24 17:15 GMT+08:00 Heiko Stübner <heiko@sntech.de>:
> Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
>> 在 2017年04月24日 16:26, Heiko Stübner 写道:
>> > Hi Caesar,
>> >
>> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
>> >> Update the cpu opp table for rk3399 op1.
>> >
>> > Ideally this should contain something about the "why".
>> > Are these new voltage settings safer to operate under?
>>
>> The before opp table is for earlier batch of rk3399 SoCs,  that's no
>> enough for the current and
>> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
>> to little voltages changed.
>
> just to make sure, this is also safe for all the non-chromebook rk3399 socs
> (like the firefly and tv-boxes, etc), right?
This is only for op1. other 3399s should have a different opp table
>
>
> Thanks
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Eddie Cai]

Hi Heiko

2017-04-24 17:15 GMT+08:00 Heiko St?bner <heiko@sntech.de>:
> Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
>> ? 2017?04?24? 16:26, Heiko St?bner ??:
>> > Hi Caesar,
>> >
>> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
>> >> Update the cpu opp table for rk3399 op1.
>> >
>> > Ideally this should contain something about the "why".
>> > Are these new voltage settings safer to operate under?
>>
>> The before opp table is for earlier batch of rk3399 SoCs,  that's no
>> enough for the current and
>> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
>> to little voltages changed.
>
> just to make sure, this is also safe for all the non-chromebook rk3399 socs
> (like the firefly and tv-boxes, etc), right?
This is only for op1. other 3399s should have a different opp table
>
>
> Thanks
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stübner]

Am Montag, 24. April 2017, 18:25:49 CEST schrieb Caesar Wang:
> 在 2017年04月24日 17:15, Heiko Stübner 写道:
> > Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
> >> 在 2017年04月24日 16:26, Heiko Stübner 写道:
> >>> Hi Caesar,
> >>> 
> >>> Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> >>>> Update the cpu opp table for rk3399 op1.
> >>> 
> >>> Ideally this should contain something about the "why".
> >>> Are these new voltage settings safer to operate under?
> >> 
> >> The before opp table is for earlier batch of rk3399 SoCs,  that's no
> >> enough for the current and
> >> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
> >> to little voltages changed.
> > 
> > just to make sure, this is also safe for all the non-chromebook rk3399
> > socs
> > (like the firefly and tv-boxes, etc), right?
> 
> No,  just for chromebook.
> 
> Maybe, we need support two table for rk3399 SoCs.
> For chromebook supporting 2GHz frequency and others support 1.8GHz
> frequency.

Definitly. So please move the chromebook opp-table to something like a rk3399-
op1-opp.dtsi and adapt rk3399-opp.dtsi to be safe for all rk3399 variants.


Thanks
Heiko

> 
> For example:
> ....
>    opp03 {
>                opp-hz = /bits/ 64 <1008000000>;
>                opp-microvolt = <925000 925000 1350000>;
>                opp-microvolt-l0 = <925000 925000 1350000>;
>                opp-microvolt-l1 = <900000 900000 1350000>;
>            };
> ....
> 
> 
> 
> -Caesar
> 
> > Thanks
> > Heiko
> > 
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stübner]

Am Montag, 24. April 2017, 18:25:49 CEST schrieb Caesar Wang:
> ? 2017?04?24? 17:15, Heiko St?bner ??:
> > Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
> >> ? 2017?04?24? 16:26, Heiko St?bner ??:
> >>> Hi Caesar,
> >>> 
> >>> Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> >>>> Update the cpu opp table for rk3399 op1.
> >>> 
> >>> Ideally this should contain something about the "why".
> >>> Are these new voltage settings safer to operate under?
> >> 
> >> The before opp table is for earlier batch of rk3399 SoCs,  that's no
> >> enough for the current and
> >> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
> >> to little voltages changed.
> > 
> > just to make sure, this is also safe for all the non-chromebook rk3399
> > socs
> > (like the firefly and tv-boxes, etc), right?
> 
> No,  just for chromebook.
> 
> Maybe, we need support two table for rk3399 SoCs.
> For chromebook supporting 2GHz frequency and others support 1.8GHz
> frequency.

Definitly. So please move the chromebook opp-table to something like a rk3399-
op1-opp.dtsi and adapt rk3399-opp.dtsi to be safe for all rk3399 variants.


Thanks
Heiko

> 
> For example:
> ....
>    opp03 {
>                opp-hz = /bits/ 64 <1008000000>;
>                opp-microvolt = <925000 925000 1350000>;
>                opp-microvolt-l0 = <925000 925000 1350000>;
>                opp-microvolt-l1 = <900000 900000 1350000>;
>            };
> ....
> 
> 
> 
> -Caesar
> 
> > Thanks
> > Heiko
> > 
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stuebner]

Hi Eddie, Caesar,

Am Montag, 24. April 2017, 18:29:26 CEST schrieb Eddie Cai:
> Hi Heiko
> 
> 2017-04-24 17:15 GMT+08:00 Heiko Stübner <heiko@sntech.de>:
> > Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
> >> 在 2017年04月24日 16:26, Heiko Stübner 写道:
> >> > Hi Caesar,
> >> >
> >> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> >> >> Update the cpu opp table for rk3399 op1.
> >> >
> >> > Ideally this should contain something about the "why".
> >> > Are these new voltage settings safer to operate under?
> >>
> >> The before opp table is for earlier batch of rk3399 SoCs,  that's no
> >> enough for the current and
> >> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
> >> to little voltages changed.
> >
> > just to make sure, this is also safe for all the non-chromebook rk3399 socs
> > (like the firefly and tv-boxes, etc), right?
> This is only for op1. other 3399s should have a different opp table

digging this up, as I'm right now working on a rk3399-firefly, could you
provide the correct opp tables for the available rk3399 variants please?

I.e. generally safe opps for boards like the firefly and the special ones
for op1-based devices?


Thanks
Heiko

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Heiko Stuebner]

Hi Eddie, Caesar,

Am Montag, 24. April 2017, 18:29:26 CEST schrieb Eddie Cai:
> Hi Heiko
> 
> 2017-04-24 17:15 GMT+08:00 Heiko St?bner <heiko@sntech.de>:
> > Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
> >> ? 2017?04?24? 16:26, Heiko St?bner ??:
> >> > Hi Caesar,
> >> >
> >> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
> >> >> Update the cpu opp table for rk3399 op1.
> >> >
> >> > Ideally this should contain something about the "why".
> >> > Are these new voltage settings safer to operate under?
> >>
> >> The before opp table is for earlier batch of rk3399 SoCs,  that's no
> >> enough for the current and
> >> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
> >> to little voltages changed.
> >
> > just to make sure, this is also safe for all the non-chromebook rk3399 socs
> > (like the firefly and tv-boxes, etc), right?
> This is only for op1. other 3399s should have a different opp table

digging this up, as I'm right now working on a rk3399-firefly, could you
provide the correct opp tables for the available rk3399 variants please?

I.e. generally safe opps for boards like the firefly and the special ones
for op1-based devices?


Thanks
Heiko

Re: [PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Eddie Cai]

Hi Heiko

2017-05-22 23:02 GMT+08:00 Heiko Stuebner <heiko@sntech.de>:
> Hi Eddie, Caesar,
>
> Am Montag, 24. April 2017, 18:29:26 CEST schrieb Eddie Cai:
>> Hi Heiko
>>
>> 2017-04-24 17:15 GMT+08:00 Heiko Stübner <heiko@sntech.de>:
>> > Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
>> >> 在 2017年04月24日 16:26, Heiko Stübner 写道:
>> >> > Hi Caesar,
>> >> >
>> >> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
>> >> >> Update the cpu opp table for rk3399 op1.
>> >> >
>> >> > Ideally this should contain something about the "why".
>> >> > Are these new voltage settings safer to operate under?
>> >>
>> >> The before opp table is for earlier batch of rk3399 SoCs,  that's no
>> >> enough for the current and
>> >> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
>> >> to little voltages changed.
>> >
>> > just to make sure, this is also safe for all the non-chromebook rk3399 socs
>> > (like the firefly and tv-boxes, etc), right?
>> This is only for op1. other 3399s should have a different opp table
>
> digging this up, as I'm right now working on a rk3399-firefly, could you
> provide the correct opp tables for the available rk3399 variants please?
>
> I.e. generally safe opps for boards like the firefly and the special ones
> for op1-based devices?
here is for 3399:
https://github.com/rockchip-linux/kernel/blob/release-4.4/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
here is for op1:
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>
>
> Thanks
> Heiko

[PATCH] arm64: dts: rockchip: update cpu opp table for rk3399 op1

[Eddie Cai]

Hi Heiko

2017-05-22 23:02 GMT+08:00 Heiko Stuebner <heiko@sntech.de>:
> Hi Eddie, Caesar,
>
> Am Montag, 24. April 2017, 18:29:26 CEST schrieb Eddie Cai:
>> Hi Heiko
>>
>> 2017-04-24 17:15 GMT+08:00 Heiko St?bner <heiko@sntech.de>:
>> > Am Montag, 24. April 2017, 16:49:08 CEST schrieb Caesar Wang:
>> >> ? 2017?04?24? 16:26, Heiko St?bner ??:
>> >> > Hi Caesar,
>> >> >
>> >> > Am Montag, 24. April 2017, 14:18:50 CEST schrieb Caesar Wang:
>> >> >> Update the cpu opp table for rk3399 op1.
>> >> >
>> >> > Ideally this should contain something about the "why".
>> >> > Are these new voltage settings safer to operate under?
>> >>
>> >> The before opp table is for earlier batch of rk3399 SoCs,  that's no
>> >> enough for the current and
>> >> newer batch of rk3399 op1. In order to suit for the rk3399 op1, we need
>> >> to little voltages changed.
>> >
>> > just to make sure, this is also safe for all the non-chromebook rk3399 socs
>> > (like the firefly and tv-boxes, etc), right?
>> This is only for op1. other 3399s should have a different opp table
>
> digging this up, as I'm right now working on a rk3399-firefly, could you
> provide the correct opp tables for the available rk3399 variants please?
>
> I.e. generally safe opps for boards like the firefly and the special ones
> for op1-based devices?
here is for 3399:
https://github.com/rockchip-linux/kernel/blob/release-4.4/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
here is for op1:
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
>
>
> Thanks
> Heiko