* [U-Boot] Pull request: u-boot-blackfin
@ 2015-11-11 6:34 Sonic Zhang
2015-11-12 15:49 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2015-11-11 6:34 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.
Thanks
Sonic Zhang
The following changes since commit 83bf005710a1e01341de5e2f44a3ce082717e313:
arm: at91: reworked meesc board support (2015-11-03 14:21:32 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git next
for you to fetch changes up to e6779f8d5ac5ae77b4e8fd135a930403bbcb43c1:
blackfin: Disable CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED in some cases
(2015-11-04 16:43:01 +0800)
----------------------------------------------------------------
Tom Rini (1):
blackfin: Disable CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED in some cases
configs/bct-brettl2_defconfig | 1 -
configs/bf526-ezbrd_defconfig | 1 -
configs/bf527-ezkit-v2_defconfig | 1 -
configs/bf527-ezkit_defconfig | 1 -
configs/bf537-stamp_defconfig | 1 -
configs/bf538f-ezkit_defconfig | 1 -
6 files changed, 6 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2015-11-11 6:34 [U-Boot] Pull request: u-boot-blackfin Sonic Zhang
@ 2015-11-12 15:49 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2015-11-12 15:49 UTC (permalink / raw)
To: u-boot
On Wed, Nov 11, 2015 at 02:34:26PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches for Blackfin from u-boot-blackfin
> into your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit 83bf005710a1e01341de5e2f44a3ce082717e313:
>
> arm: at91: reworked meesc board support (2015-11-03 14:21:32 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git next
>
> for you to fetch changes up to e6779f8d5ac5ae77b4e8fd135a930403bbcb43c1:
>
> blackfin: Disable CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED in some cases
> (2015-11-04 16:43:01 +0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151112/1f783200/attachment.sig>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2015-02-02 7:19 Sonic Zhang
@ 2015-02-02 18:59 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2015-02-02 18:59 UTC (permalink / raw)
To: u-boot
On Mon, Feb 02, 2015 at 03:19:00PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches for Blackfin from u-boot-blackfin
> into your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit 28c4dae114c9b94b2a1111d81d4da716e9fc2cba:
>
> Merge branch 'next' of git://git.denx.de/u-boot-video (2015-01-14
> 16:26:15 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to 0d3fd562c4977af4e992f3f73a441081ff8c60d0:
>
> bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561
> boards (2015-01-16 13:31:35 +0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150202/c2caf7fd/attachment-0001.sig>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2015-02-02 7:19 Sonic Zhang
2015-02-02 18:59 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2015-02-02 7:19 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.
Thanks
Sonic Zhang
The following changes since commit 28c4dae114c9b94b2a1111d81d4da716e9fc2cba:
Merge branch 'next' of git://git.denx.de/u-boot-video (2015-01-14
16:26:15 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to 0d3fd562c4977af4e992f3f73a441081ff8c60d0:
bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561
boards (2015-01-16 13:31:35 +0800)
----------------------------------------------------------------
Sonic Zhang (2):
bfin: enlarge the monitor size for ip04 board to avoid oversize link error
bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boards
include/configs/bct-brettl2.h | 2 +-
include/configs/ibf-dsp561.h | 2 +-
include/configs/ip04.h | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2014-11-10 4:42 Sonic Zhang
@ 2014-11-10 21:28 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2014-11-10 21:28 UTC (permalink / raw)
To: u-boot
On Mon, Nov 10, 2014 at 12:42:46PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches for Blackfin from u-boot-blackfin
> into your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit 11ada9225a16ed2d8ddbf0715a2416245a777cbc:
>
> Merge branch 'rmobile' of git://www.denx.de/git/u-boot-sh
> (2014-11-05 13:11:18 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to 6721bb5ad8744cae647cad9e917df649524ac54d:
>
> bfin: the max bfin sdh block count is 127 (2014-11-10 12:11:00 +0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141110/0616907d/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2014-11-10 4:42 Sonic Zhang
2014-11-10 21:28 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2014-11-10 4:42 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.
Thanks
Sonic Zhang
The following changes since commit 11ada9225a16ed2d8ddbf0715a2416245a777cbc:
Merge branch 'rmobile' of git://www.denx.de/git/u-boot-sh
(2014-11-05 13:11:18 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to 6721bb5ad8744cae647cad9e917df649524ac54d:
bfin: the max bfin sdh block count is 127 (2014-11-10 12:11:00 +0800)
----------------------------------------------------------------
Sonic Zhang (2):
bfin: make the CPU macro of LDR target more genenric
bfin: the max bfin sdh block count is 127
Makefile | 2 +-
arch/blackfin/include/asm/config.h | 2 ++
include/configs/bfin_adi_common.h | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2014-08-06 12:38 ` Tom Rini
@ 2014-08-07 7:11 ` Sonic Zhang
0 siblings, 0 replies; 24+ messages in thread
From: Sonic Zhang @ 2014-08-07 7:11 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Wed, Aug 6, 2014 at 8:38 PM, Tom Rini <trini@ti.com> wrote:
> On Mon, Aug 04, 2014 at 09:56:45AM +0800, Sonic Zhang wrote:
>
>> Hi Tom,
>>
>> Please pull the following patches for Blackfin from u-boot-blackfin
>> into your tree.
>>
>> Thanks
>>
>> Sonic Zhang
>>
>> The following changes since commit e1b362f4425209d836f230a872ef2bf04b45de27:
>>
>> boards.cfg : Add maintainers entries for SOCFPGA (2014-07-29 11:51:03 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-blackfin.git master
>>
>> for you to fetch changes up to 97cd2735b279068037013426977c44f45a8d5151:
>>
>> support blackfin board initialization in generic board_f (2014-08-01
>> 18:21:45 +0800)
>>
>> ----------------------------------------------------------------
>> Aaron Wu (1):
>> bfin: add register define required by core B on dual core BF609 processor
>>
>> Scott Jiang (1):
>> blackfin: spi clock is in sysclk1 domain instead of sysclk0
>>
>> Sonic Zhang (2):
>> blackfin: convert blackfin board_f and board_r to use generic
>> board init functions
>> support blackfin board initialization in generic board_f
>>
>> arch/blackfin/config.mk | 3 +
>> arch/blackfin/cpu/cpu.c | 333 +++++++++++++++--
>> arch/blackfin/cpu/start.S | 14 +-
>> arch/blackfin/cpu/u-boot.lds | 4 +-
>> arch/blackfin/include/asm/clock.h | 2 +-
>> arch/blackfin/include/asm/mach-bf609/BF609_def.h | 2 +
>> arch/blackfin/include/asm/u-boot.h | 3 +
>> arch/blackfin/lib/Makefile | 7 +-
>> arch/blackfin/lib/board.c | 443 -----------------------
>> arch/blackfin/lib/sections.c | 11 +
>> common/board_f.c | 35 +-
>> include/configs/bfin_adi_common.h | 4 +
>> include/watchdog.h | 2 +-
>> 13 files changed, 366 insertions(+), 497 deletions(-)
>> delete mode 100644 arch/blackfin/lib/board.c
>> create mode 100644 arch/blackfin/lib/sections.c
>
> With this applied, MAKEALL -a blackfin fails for a number of boards. In
> addition, this also breaks m68k as they haven't switched over to generic
> board yet and need:
The u-boot image sizes for some blackfin boards exceed the limit after
converting to the generic board. I will fix the config files.
>
> diff --git a/include/watchdog.h b/include/watchdog.h
> index 174c894..9273fa1 100644
> --- a/include/watchdog.h
> +++ b/include/watchdog.h
> @@ -21,7 +21,8 @@
> int init_func_watchdog_reset(void);
> #endif
>
> -#if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
> +#if defined(CONFIG_SYS_GENERIC_BOARD) && \
> + (defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG))
> #define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init,
> #define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset,
> #else
>
OK. I will add your suggestion to the v4 patch.
Thank you for your review.
Sonic Zhang
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2014-08-04 1:56 Sonic Zhang
@ 2014-08-06 12:38 ` Tom Rini
2014-08-07 7:11 ` Sonic Zhang
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2014-08-06 12:38 UTC (permalink / raw)
To: u-boot
On Mon, Aug 04, 2014 at 09:56:45AM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches for Blackfin from u-boot-blackfin
> into your tree.
>
> Thanks
>
> Sonic Zhang
>
> The following changes since commit e1b362f4425209d836f230a872ef2bf04b45de27:
>
> boards.cfg : Add maintainers entries for SOCFPGA (2014-07-29 11:51:03 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to 97cd2735b279068037013426977c44f45a8d5151:
>
> support blackfin board initialization in generic board_f (2014-08-01
> 18:21:45 +0800)
>
> ----------------------------------------------------------------
> Aaron Wu (1):
> bfin: add register define required by core B on dual core BF609 processor
>
> Scott Jiang (1):
> blackfin: spi clock is in sysclk1 domain instead of sysclk0
>
> Sonic Zhang (2):
> blackfin: convert blackfin board_f and board_r to use generic
> board init functions
> support blackfin board initialization in generic board_f
>
> arch/blackfin/config.mk | 3 +
> arch/blackfin/cpu/cpu.c | 333 +++++++++++++++--
> arch/blackfin/cpu/start.S | 14 +-
> arch/blackfin/cpu/u-boot.lds | 4 +-
> arch/blackfin/include/asm/clock.h | 2 +-
> arch/blackfin/include/asm/mach-bf609/BF609_def.h | 2 +
> arch/blackfin/include/asm/u-boot.h | 3 +
> arch/blackfin/lib/Makefile | 7 +-
> arch/blackfin/lib/board.c | 443 -----------------------
> arch/blackfin/lib/sections.c | 11 +
> common/board_f.c | 35 +-
> include/configs/bfin_adi_common.h | 4 +
> include/watchdog.h | 2 +-
> 13 files changed, 366 insertions(+), 497 deletions(-)
> delete mode 100644 arch/blackfin/lib/board.c
> create mode 100644 arch/blackfin/lib/sections.c
With this applied, MAKEALL -a blackfin fails for a number of boards. In
addition, this also breaks m68k as they haven't switched over to generic
board yet and need:
diff --git a/include/watchdog.h b/include/watchdog.h
index 174c894..9273fa1 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -21,7 +21,8 @@
int init_func_watchdog_reset(void);
#endif
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
+#if defined(CONFIG_SYS_GENERIC_BOARD) && \
+ (defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG))
#define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init,
#define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset,
#else
So, NAK.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140806/d35daaed/attachment.pgp>
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2014-08-04 1:56 Sonic Zhang
2014-08-06 12:38 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2014-08-04 1:56 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.
Thanks
Sonic Zhang
The following changes since commit e1b362f4425209d836f230a872ef2bf04b45de27:
boards.cfg : Add maintainers entries for SOCFPGA (2014-07-29 11:51:03 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to 97cd2735b279068037013426977c44f45a8d5151:
support blackfin board initialization in generic board_f (2014-08-01
18:21:45 +0800)
----------------------------------------------------------------
Aaron Wu (1):
bfin: add register define required by core B on dual core BF609 processor
Scott Jiang (1):
blackfin: spi clock is in sysclk1 domain instead of sysclk0
Sonic Zhang (2):
blackfin: convert blackfin board_f and board_r to use generic
board init functions
support blackfin board initialization in generic board_f
arch/blackfin/config.mk | 3 +
arch/blackfin/cpu/cpu.c | 333 +++++++++++++++--
arch/blackfin/cpu/start.S | 14 +-
arch/blackfin/cpu/u-boot.lds | 4 +-
arch/blackfin/include/asm/clock.h | 2 +-
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 2 +
arch/blackfin/include/asm/u-boot.h | 3 +
arch/blackfin/lib/Makefile | 7 +-
arch/blackfin/lib/board.c | 443 -----------------------
arch/blackfin/lib/sections.c | 11 +
common/board_f.c | 35 +-
include/configs/bfin_adi_common.h | 4 +
include/watchdog.h | 2 +-
13 files changed, 366 insertions(+), 497 deletions(-)
delete mode 100644 arch/blackfin/lib/board.c
create mode 100644 arch/blackfin/lib/sections.c
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2014-02-07 3:33 Sonic Zhang
@ 2014-02-07 13:36 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2014-02-07 13:36 UTC (permalink / raw)
To: u-boot
On Fri, Feb 07, 2014 at 11:33:57AM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches for Blackfin from u-boot-blackfin
> into your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit dbf3de2dd26cae37d16b00b348828c883b658cc5:
>
> include/usb/s3c_udc.h: Add <asm/sizes.h> (2014-02-06 14:26:05 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to 819ca38fa70da85a14b4328d1511146e6c59eb32:
>
> blackfin: Initialize the EMAC VLAN with proper default value
> (2014-02-07 11:18:06 +0800)
>
> ----------------------------------------------------------------
> Aaron Wu (1):
> blackfin: Initialize the EMAC VLAN with proper default value
>
> Bob Liu (1):
> blackfin: init bss early
>
> Sonic Zhang (2):
> blackfin: The logic of the BF609 macro is opposite.
> blackfin: Change SMC dcplb entry flag to cover 16M address region
>
> arch/blackfin/cpu/initcode.h | 6 +++---
> arch/blackfin/cpu/start.S | 2 +-
> arch/blackfin/include/asm/mach-common/bits/emac.h | 3 +++
> arch/blackfin/lib/board.c | 3 ++-
> drivers/net/bfin_mac.c | 2 ++
> 5 files changed, 11 insertions(+), 5 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140207/5a133182/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2014-02-07 3:33 Sonic Zhang
2014-02-07 13:36 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2014-02-07 3:33 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.
Thanks
Sonic Zhang
The following changes since commit dbf3de2dd26cae37d16b00b348828c883b658cc5:
include/usb/s3c_udc.h: Add <asm/sizes.h> (2014-02-06 14:26:05 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to 819ca38fa70da85a14b4328d1511146e6c59eb32:
blackfin: Initialize the EMAC VLAN with proper default value
(2014-02-07 11:18:06 +0800)
----------------------------------------------------------------
Aaron Wu (1):
blackfin: Initialize the EMAC VLAN with proper default value
Bob Liu (1):
blackfin: init bss early
Sonic Zhang (2):
blackfin: The logic of the BF609 macro is opposite.
blackfin: Change SMC dcplb entry flag to cover 16M address region
arch/blackfin/cpu/initcode.h | 6 +++---
arch/blackfin/cpu/start.S | 2 +-
arch/blackfin/include/asm/mach-common/bits/emac.h | 3 +++
arch/blackfin/lib/board.c | 3 ++-
drivers/net/bfin_mac.c | 2 ++
5 files changed, 11 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-12-16 3:49 Sonic Zhang
@ 2013-12-16 14:17 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2013-12-16 14:17 UTC (permalink / raw)
To: u-boot
On Mon, Dec 16, 2013 at 11:49:37AM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following bug fixing patches from u-boot-blackfin into
> your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit e03c76c30342797a25ef9350e51c8daa0b56f1df:
>
> powerpc/mpc85xx: Update CONFIG_SYS_FSL_TBCLK_DIV for T1040
> (2013-12-11 11:12:54 -0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to ecf9ce2149bdb884ac294e9b39c673046bb9b572:
>
> blackfin: remove build warning (2013-12-16 11:38:33 +0800)
>
> ----------------------------------------------------------------
> Sonic Zhang (6):
> blackfin: fix build error by adding CONFIG_BFIN_SERIAL
> blackfin: fix building error by adding macro CONFIG_SYS_I2C
> blackfin: Disable commands to reduce l1 ram requirement
> blackfin: fix building error by enlarging the memory size
> blackfin: fixing warning by including proper headers
> blackfin: remove build warning
>
> arch/blackfin/cpu/initcode.c | 18 ++++++++++--------
> arch/blackfin/include/asm/blackfin_local.h | 7 +++++--
> arch/blackfin/lib/board.c | 1 +
> arch/blackfin/lib/clocks.c | 5 ++++-
> board/bf609-ezkit/bf609-ezkit.c | 1 +
> include/configs/bf506f-ezkit.h | 8 ++++++--
> include/configs/bf561-acvilon.h | 2 +-
> include/configs/bf561-ezkit.h | 1 +
> include/configs/blackvme.h | 1 +
> include/configs/cm-bf537e.h | 4 ++--
> include/configs/cm-bf537u.h | 3 ++-
> include/configs/tcm-bf537.h | 3 ++-
> 12 files changed, 36 insertions(+), 18 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131216/3172c4ff/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2013-12-16 3:49 Sonic Zhang
2013-12-16 14:17 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2013-12-16 3:49 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following bug fixing patches from u-boot-blackfin into
your tree.
Thanks
Sonic Zhang
The following changes since commit e03c76c30342797a25ef9350e51c8daa0b56f1df:
powerpc/mpc85xx: Update CONFIG_SYS_FSL_TBCLK_DIV for T1040
(2013-12-11 11:12:54 -0800)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to ecf9ce2149bdb884ac294e9b39c673046bb9b572:
blackfin: remove build warning (2013-12-16 11:38:33 +0800)
----------------------------------------------------------------
Sonic Zhang (6):
blackfin: fix build error by adding CONFIG_BFIN_SERIAL
blackfin: fix building error by adding macro CONFIG_SYS_I2C
blackfin: Disable commands to reduce l1 ram requirement
blackfin: fix building error by enlarging the memory size
blackfin: fixing warning by including proper headers
blackfin: remove build warning
arch/blackfin/cpu/initcode.c | 18 ++++++++++--------
arch/blackfin/include/asm/blackfin_local.h | 7 +++++--
arch/blackfin/lib/board.c | 1 +
arch/blackfin/lib/clocks.c | 5 ++++-
board/bf609-ezkit/bf609-ezkit.c | 1 +
include/configs/bf506f-ezkit.h | 8 ++++++--
include/configs/bf561-acvilon.h | 2 +-
include/configs/bf561-ezkit.h | 1 +
include/configs/blackvme.h | 1 +
include/configs/cm-bf537e.h | 4 ++--
include/configs/cm-bf537u.h | 3 ++-
include/configs/tcm-bf537.h | 3 ++-
12 files changed, 36 insertions(+), 18 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-12-06 8:14 Sonic Zhang
@ 2013-12-06 13:28 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2013-12-06 13:28 UTC (permalink / raw)
To: u-boot
On Fri, Dec 06, 2013 at 04:14:42PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches from u-boot-blackfin into your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit f44483b57c49282299da0e5c10073b909cdad979:
>
> Merge branch 'serial' of git://git.denx.de/u-boot-microblaze
> (2013-12-02 08:48:02 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to 985e18d14e0cb3933311945d30de6357cf8be9df:
>
> blackfin: Do not generate unused header bootrom-asm-offsets.h
> (2013-12-06 16:06:51 +0800)
>
> ----------------------------------------------------------------
> Axel Lin (2):
> spi: bfin_spi: Remove unnecessary test for bus and pins[bus]
> spi: bfin_spi6xx: Remove unnecessary test for bus and pins[bus]
>
> Masahiro Yamada (1):
> blackfin: Do not generate unused header bootrom-asm-offsets.h
>
> Sonic Zhang (4):
> blackfin: Use ADI_GPIO2 driver other than the default ADI_GPIO1
> blackfin: If none ADI_GPIOX macro is defined, use ADI_GPIO1 as default
> blackfin: Add missing macro CONFIG_BFIN_SERIAL
> blackfin: soft-i2c: No need to define blackfin specific soft i2c
> operations
>
> Makefile | 1 -
> arch/blackfin/cpu/.gitignore | 2 --
> arch/blackfin/cpu/Makefile | 10 --------
> arch/blackfin/cpu/bootrom-asm-offsets.awk | 41 ------------------------------
> arch/blackfin/cpu/bootrom-asm-offsets.c.in | 12 ---------
> arch/blackfin/cpu/gpio.c | 2 +-
> arch/blackfin/include/asm/gpio.h | 2 +-
> drivers/spi/bfin_spi.c | 17 +++++++------
> drivers/spi/bfin_spi6xx.c | 5 +---
> include/configs/bf506f-ezkit.h | 1 +
> include/configs/bf525-ucr2.h | 1 +
> include/configs/bf533-stamp.h | 29 ++-------------------
> include/configs/bf537-minotaur.h | 1 +
> include/configs/bf537-srv1.h | 1 +
> include/configs/blackstamp.h | 1 +
> include/configs/cm-bf548.h | 2 ++
> include/configs/dnp5370.h | 1 +
> 17 files changed, 22 insertions(+), 107 deletions(-)
> delete mode 100644 arch/blackfin/cpu/bootrom-asm-offsets.awk
> delete mode 100644 arch/blackfin/cpu/bootrom-asm-offsets.c.in
Applied to u-boot/master, thanks!
But please note that with gcc 4.5 from
http://sourceforge.net/projects/adi-toolchain/files/2013R1/2013R1_45-RC1/x86_64/
I see:
--------------------- SUMMARY ----------------------------
Boards compiled: 30
Boards with errors: 7 ( cm-bf537u cm-bf537e bf561-acvilon blackvme
bf506f-ezkit tcm-bf537 bf561-ezkit )
Boards with warnings but no errors: 28 ( bf609-ezkit bf533-ezkit
bf525-ucr2 dnp5370 ip04 blackstamp cm-bf561 bf537-srv1 ibf-dsp561
bf527-sdp bf537-stamp bct-brettl2 bf537-minotaur bf538f-ezkit
bf526-ezbrd cm-bf527 bf527-ezkit br4 cm-bf548 cm-bf533 bf533-stamp
bf518f-ezbrd bf527-ad7160-eval bf548-ezkit pr1 bf527-ezkit-v2 tcm-bf518
bf537-pnav )
----------------------------------------------------------
Can we address these warnings / errors? Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131206/cb9081b1/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2013-12-06 8:14 Sonic Zhang
2013-12-06 13:28 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2013-12-06 8:14 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches from u-boot-blackfin into your tree.
Thanks
Sonic Zhang
The following changes since commit f44483b57c49282299da0e5c10073b909cdad979:
Merge branch 'serial' of git://git.denx.de/u-boot-microblaze
(2013-12-02 08:48:02 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to 985e18d14e0cb3933311945d30de6357cf8be9df:
blackfin: Do not generate unused header bootrom-asm-offsets.h
(2013-12-06 16:06:51 +0800)
----------------------------------------------------------------
Axel Lin (2):
spi: bfin_spi: Remove unnecessary test for bus and pins[bus]
spi: bfin_spi6xx: Remove unnecessary test for bus and pins[bus]
Masahiro Yamada (1):
blackfin: Do not generate unused header bootrom-asm-offsets.h
Sonic Zhang (4):
blackfin: Use ADI_GPIO2 driver other than the default ADI_GPIO1
blackfin: If none ADI_GPIOX macro is defined, use ADI_GPIO1 as default
blackfin: Add missing macro CONFIG_BFIN_SERIAL
blackfin: soft-i2c: No need to define blackfin specific soft i2c
operations
Makefile | 1 -
arch/blackfin/cpu/.gitignore | 2 --
arch/blackfin/cpu/Makefile | 10 --------
arch/blackfin/cpu/bootrom-asm-offsets.awk | 41 ------------------------------
arch/blackfin/cpu/bootrom-asm-offsets.c.in | 12 ---------
arch/blackfin/cpu/gpio.c | 2 +-
arch/blackfin/include/asm/gpio.h | 2 +-
drivers/spi/bfin_spi.c | 17 +++++++------
drivers/spi/bfin_spi6xx.c | 5 +---
include/configs/bf506f-ezkit.h | 1 +
include/configs/bf525-ucr2.h | 1 +
include/configs/bf533-stamp.h | 29 ++-------------------
include/configs/bf537-minotaur.h | 1 +
include/configs/bf537-srv1.h | 1 +
include/configs/blackstamp.h | 1 +
include/configs/cm-bf548.h | 2 ++
include/configs/dnp5370.h | 1 +
17 files changed, 22 insertions(+), 107 deletions(-)
delete mode 100644 arch/blackfin/cpu/bootrom-asm-offsets.awk
delete mode 100644 arch/blackfin/cpu/bootrom-asm-offsets.c.in
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-11-04 9:09 Sonic Zhang
@ 2013-11-04 14:58 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2013-11-04 14:58 UTC (permalink / raw)
To: u-boot
On Mon, Nov 04, 2013 at 05:09:03PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches from u-boot-blackfin into your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit 509dca7a11aad394d781a9d31a7bfa6692562741:
>
> Merge branch 'master' of git://git.denx.de/u-boot-video (2013-10-30
> 08:36:48 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to cae4d0403c0863176f228d410d6a29b3f4b9d595:
>
> blackfin: Move machine specific gpio_port_t structure back to
> blackfin arch folder. (2013-11-04 16:50:46 +0800)
>
> ----------------------------------------------------------------
> Masahiro Yamada (1):
> blackfin: fix a warning in arch/blackfin/cpu/cpu.c
>
> Steven Miao (1):
> blackfin: Move machine specific gpio_port_t structure back to
> blackfin arch folder.
>
> arch/blackfin/cpu/Makefile | 2 +-
> arch/blackfin/cpu/cpu.c | 3 +++
> arch/blackfin/cpu/gpio.c | 17 +++++++++++++++++
> arch/blackfin/include/asm/gpio.h | 3 +++
> drivers/gpio/adi_gpio2.c | 17 -----------------
> 5 files changed, 24 insertions(+), 18 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/e1f816ed/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2013-11-04 9:09 Sonic Zhang
2013-11-04 14:58 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2013-11-04 9:09 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches from u-boot-blackfin into your tree.
Thanks
Sonic Zhang
The following changes since commit 509dca7a11aad394d781a9d31a7bfa6692562741:
Merge branch 'master' of git://git.denx.de/u-boot-video (2013-10-30
08:36:48 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to cae4d0403c0863176f228d410d6a29b3f4b9d595:
blackfin: Move machine specific gpio_port_t structure back to
blackfin arch folder. (2013-11-04 16:50:46 +0800)
----------------------------------------------------------------
Masahiro Yamada (1):
blackfin: fix a warning in arch/blackfin/cpu/cpu.c
Steven Miao (1):
blackfin: Move machine specific gpio_port_t structure back to
blackfin arch folder.
arch/blackfin/cpu/Makefile | 2 +-
arch/blackfin/cpu/cpu.c | 3 +++
arch/blackfin/cpu/gpio.c | 17 +++++++++++++++++
arch/blackfin/include/asm/gpio.h | 3 +++
drivers/gpio/adi_gpio2.c | 17 -----------------
5 files changed, 24 insertions(+), 18 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-07-31 9:14 Sonic Zhang
@ 2013-08-01 13:18 ` Tom Rini
0 siblings, 0 replies; 24+ messages in thread
From: Tom Rini @ 2013-08-01 13:18 UTC (permalink / raw)
To: u-boot
On Wed, Jul 31, 2013 at 05:14:59PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches from u-boot-blackfin into your tree.
>
>
> Thanks
>
>
> The following changes since commit 6a19cc9df0ff76273cecd3cd72323a73ff44e8de:
>
> cfi_flash: Add prototypes of overridable functions (2013-07-30 09:11:54 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to 327b5c9f7cde4e621c2f49fbd2e9890d32f2bef8:
>
> spi: bfin_spi: Use DIV_ROUND_UP instead of open-coded (2013-07-31
> 16:56:04 +0800)
>
> ----------------------------------------------------------------
> Axel Lin (5):
> blackfin: gpio: Unreserve gpio in special_gpio_free()
> gpio: adi_gpio2: Unreserve gpio in special_gpio_free()
> blackfin: gpio: Use proper mask for comparing function
> blackfin: Fix using gd->baudrate before setting its value
> spi: bfin_spi: Use DIV_ROUND_UP instead of open-coded
>
> arch/blackfin/cpu/gpio.c | 15 ++++++++-------
> arch/blackfin/lib/board.c | 3 +--
> drivers/gpio/adi_gpio2.c | 4 ++--
> drivers/spi/bfin_spi.c | 4 +---
> 4 files changed, 12 insertions(+), 14 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130801/88f8057b/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2013-07-31 9:14 Sonic Zhang
2013-08-01 13:18 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2013-07-31 9:14 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches from u-boot-blackfin into your tree.
Thanks
The following changes since commit 6a19cc9df0ff76273cecd3cd72323a73ff44e8de:
cfi_flash: Add prototypes of overridable functions (2013-07-30 09:11:54 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to 327b5c9f7cde4e621c2f49fbd2e9890d32f2bef8:
spi: bfin_spi: Use DIV_ROUND_UP instead of open-coded (2013-07-31
16:56:04 +0800)
----------------------------------------------------------------
Axel Lin (5):
blackfin: gpio: Unreserve gpio in special_gpio_free()
gpio: adi_gpio2: Unreserve gpio in special_gpio_free()
blackfin: gpio: Use proper mask for comparing function
blackfin: Fix using gd->baudrate before setting its value
spi: bfin_spi: Use DIV_ROUND_UP instead of open-coded
arch/blackfin/cpu/gpio.c | 15 ++++++++-------
arch/blackfin/lib/board.c | 3 +--
drivers/gpio/adi_gpio2.c | 4 ++--
drivers/spi/bfin_spi.c | 4 +---
4 files changed, 12 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-05-11 16:20 ` Tom Rini
@ 2013-05-13 4:11 ` Sonic Zhang
0 siblings, 0 replies; 24+ messages in thread
From: Sonic Zhang @ 2013-05-13 4:11 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Sun, May 12, 2013 at 12:20 AM, Tom Rini <trini@ti.com> wrote:
> On Sat, May 11, 2013 at 11:27:41PM +0800, Sonic Zhang wrote:
>> Hi Tom,
>>
>> On Thu, May 9, 2013 at 8:09 PM, Tom Rini <trini@ti.com> wrote:
>> >
>> > Some number of these changes haven't been posted to the list for review
>> > yet. I'm pretty sure. I don't recall seeing the CONFIG_CMD_SOFTSWITCH
>> > stuff go past, and you didn't document that new flag in the top-level
>>
>> I just forward the former softswtich command patch to you which
>> include the definition of CONFIG_CMD_SOFTSWITCH. What else do you
>> think are missing?
>
> Well, please go over everything else and make sure it's showing up in
> patchwork. I spotted one trivially so I don't know how many others
> might have been missed.
Yes, you are right. I forgot to send out 3 patches in the middle.
blackfin: Enable early print via the generic serial API.
blackfin: Add memory virtual console to blackfin serial driver.
blackfin: Uart divisor should be set after their values are generated.
I will send out soon.
Thanks,
Sonic
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-05-11 15:27 ` Sonic Zhang
@ 2013-05-11 16:20 ` Tom Rini
2013-05-13 4:11 ` Sonic Zhang
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2013-05-11 16:20 UTC (permalink / raw)
To: u-boot
On Sat, May 11, 2013 at 11:27:41PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> On Thu, May 9, 2013 at 8:09 PM, Tom Rini <trini@ti.com> wrote:
> >
> > Some number of these changes haven't been posted to the list for review
> > yet. I'm pretty sure. I don't recall seeing the CONFIG_CMD_SOFTSWITCH
> > stuff go past, and you didn't document that new flag in the top-level
>
> I just forward the former softswtich command patch to you which
> include the definition of CONFIG_CMD_SOFTSWITCH. What else do you
> think are missing?
Well, please go over everything else and make sure it's showing up in
patchwork. I spotted one trivially so I don't know how many others
might have been missed.
> > README. Also, you did a merge of your patman branch which means there's
> > extra stuff in your commit messages.
>
> Because this command is only implemented for blackfin by now. Should I
> explan this limitation in the README as well?
Yes.
> > Please submit the new patches to the mailing list, and re-submit the
> > pull request with everything else you do have ready. Thanks!
> >
>
> Yes, I just figured out my patman subfolder isn't equal to the
> upstream master, but I didn't add any stuff except for doing rebase.
> It looks some upstream patches may be lost during rebase. I will try
> to redo rebase and re-submit the pull request.
Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130511/1b0c22b3/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-05-09 12:09 ` Tom Rini
@ 2013-05-11 15:27 ` Sonic Zhang
2013-05-11 16:20 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2013-05-11 15:27 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Thu, May 9, 2013 at 8:09 PM, Tom Rini <trini@ti.com> wrote:
>
> Some number of these changes haven't been posted to the list for review
> yet. I'm pretty sure. I don't recall seeing the CONFIG_CMD_SOFTSWITCH
> stuff go past, and you didn't document that new flag in the top-level
I just forward the former softswtich command patch to you which
include the definition of CONFIG_CMD_SOFTSWITCH. What else do you
think are missing?
> README. Also, you did a merge of your patman branch which means there's
> extra stuff in your commit messages.
Because this command is only implemented for blackfin by now. Should I
explan this limitation in the README as well?
>
> Please submit the new patches to the mailing list, and re-submit the
> pull request with everything else you do have ready. Thanks!
>
Yes, I just figured out my patman subfolder isn't equal to the
upstream master, but I didn't add any stuff except for doing rebase.
It looks some upstream patches may be lost during rebase. I will try
to redo rebase and re-submit the pull request.
The difference are as following:
diff -urN u-boot-blackfin/tools/patman/patman u-boot.up/tools/patman/patman
--- u-boot-blackfin/tools/patman/patman 2013-05-11 23:11:43.158054437 +0800
+++ u-boot.up/tools/patman/patman 2013-05-11 23:00:34.050736519 +0800
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
#
# Copyright (c) 2011 The Chromium OS Authors.
#
diff -urN u-boot-blackfin/tools/patman/patman.py
u-boot.up/tools/patman/patman.py
--- u-boot-blackfin/tools/patman/patman.py 2013-05-11 23:11:43.158054437 +0800
+++ u-boot.up/tools/patman/patman.py 2013-05-11 23:00:34.050736519 +0800
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
#
# Copyright (c) 2011 The Chromium OS Authors.
#
diff -urN u-boot-blackfin/tools/patman/series.py
u-boot.up/tools/patman/series.py
--- u-boot-blackfin/tools/patman/series.py 2013-05-11 23:11:43.158054437 +0800
+++ u-boot.up/tools/patman/series.py 2013-05-11 23:00:34.050736519 +0800
@@ -40,6 +40,7 @@
notes: List of lines in the notes
changes: (dict) List of changes for each version, The key is
the integer version number
+ allow_overwrite: Allow tags to overwrite an existing tag
"""
def __init__(self):
self.cc = []
@@ -49,6 +50,7 @@
self.cover = None
self.notes = []
self.changes = {}
+ self.allow_overwrite = False
# Written in MakeCcFile()
# key: name of patch file
@@ -72,7 +74,7 @@
"""
# If we already have it, then add to our list
name = name.replace('-', '_')
- if name in self:
+ if name in self and not self.allow_overwrite:
values = value.split(',')
values = [str.strip() for str in values]
if type(self[name]) != type([]):
Regards,
Sonic
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
2013-05-09 3:13 Sonic Zhang
@ 2013-05-09 12:09 ` Tom Rini
2013-05-11 15:27 ` Sonic Zhang
0 siblings, 1 reply; 24+ messages in thread
From: Tom Rini @ 2013-05-09 12:09 UTC (permalink / raw)
To: u-boot
On Thu, May 09, 2013 at 11:13:52AM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches from u-boot-blackfin into your tree.
>
> Thanks
>
> Sonic
>
> The following changes since commit fe8e4dbad1d31c452af3fbabba21e72b210381b3:
>
> nds32: Use sections header to obtain link symbols (2013-05-08 12:38:10 +0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to 2ac75146988bdcf8c30aee9c286af7f2f93b474e:
>
> bfin: Move gpio support for bf54x and bf60x into the generic driver
> folder. (2013-05-09 10:53:47 +0800)
>
> ----------------------------------------------------------------
> Bob Liu (3):
> blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.
> blackfin: add baudrate to bdinfo
> blackfin: bf609: add softswitch config command
>
> Marek Vasut (1):
> blackfin: The buf variable in bfin_mac.c is not used and produces warning,
>
> Mike Frysinger (1):
> Blackfin: adjust asm constraints with NMI workaround
>
> Scott Jiang (3):
> bfin: Remove spi dma function in bf5xx.
> bfin: discard invalid data and clear RXS in bf5xx spi driver
> bf609: add SPI register base address
>
> Sonic Zhang (14):
> blackfin: Change the member's type in dma structures.
> blackfin: limit the max memory dma peripheral transfer size to 4 bytes.
> blackfin: run core1 from L1 code sram start address in uboot
> init code on core 0
> blackfin: Set correct early debug serial baudrate.
> blackfin: Correct early serial mess output in BYPASS boot mode.
> blackfin: bf609: implement soft switch
> blackfin: Fit u-boot image size into limited nor flash on blackfin.
> blackfin: Enable early print via the generic serial API.
> blackfin: Add memory virtual console to blackfin serial driver.
> blackfin: Uart divisor should be set after their values are generated.
> blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
> blackfin: Move blackfin serial driver out of blackfin arch folder.
> blackfin: Add comments for watchdog event initialization.
> bfin: Move gpio support for bf54x and bf60x into the generic
> driver folder.
Some number of these changes haven't been posted to the list for review
yet. I'm pretty sure. I don't recall seeing the CONFIG_CMD_SOFTSWITCH
stuff go past, and you didn't document that new flag in the top-level
README. Also, you did a merge of your patman branch which means there's
extra stuff in your commit messages.
Please submit the new patches to the mailing list, and re-submit the
pull request with everything else you do have ready. Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130509/8cbb4ab4/attachment.pgp>
^ permalink raw reply [flat|nested] 24+ messages in thread
* [U-Boot] Pull request: u-boot-blackfin
@ 2013-05-09 3:13 Sonic Zhang
2013-05-09 12:09 ` Tom Rini
0 siblings, 1 reply; 24+ messages in thread
From: Sonic Zhang @ 2013-05-09 3:13 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches from u-boot-blackfin into your tree.
Thanks
Sonic
The following changes since commit fe8e4dbad1d31c452af3fbabba21e72b210381b3:
nds32: Use sections header to obtain link symbols (2013-05-08 12:38:10 +0800)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to 2ac75146988bdcf8c30aee9c286af7f2f93b474e:
bfin: Move gpio support for bf54x and bf60x into the generic driver
folder. (2013-05-09 10:53:47 +0800)
----------------------------------------------------------------
Bob Liu (3):
blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.
blackfin: add baudrate to bdinfo
blackfin: bf609: add softswitch config command
Marek Vasut (1):
blackfin: The buf variable in bfin_mac.c is not used and produces warning,
Mike Frysinger (1):
Blackfin: adjust asm constraints with NMI workaround
Scott Jiang (3):
bfin: Remove spi dma function in bf5xx.
bfin: discard invalid data and clear RXS in bf5xx spi driver
bf609: add SPI register base address
Sonic Zhang (14):
blackfin: Change the member's type in dma structures.
blackfin: limit the max memory dma peripheral transfer size to 4 bytes.
blackfin: run core1 from L1 code sram start address in uboot
init code on core 0
blackfin: Set correct early debug serial baudrate.
blackfin: Correct early serial mess output in BYPASS boot mode.
blackfin: bf609: implement soft switch
blackfin: Fit u-boot image size into limited nor flash on blackfin.
blackfin: Enable early print via the generic serial API.
blackfin: Add memory virtual console to blackfin serial driver.
blackfin: Uart divisor should be set after their values are generated.
blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
blackfin: Move blackfin serial driver out of blackfin arch folder.
blackfin: Add comments for watchdog event initialization.
bfin: Move gpio support for bf54x and bf60x into the generic
driver folder.
arch/blackfin/cpu/Makefile | 4 +-
arch/blackfin/cpu/cpu.c | 32 +-
arch/blackfin/cpu/gpio.c | 145 +------
arch/blackfin/cpu/initcode.c | 71 ++--
arch/blackfin/cpu/start.S | 29 +-
arch/blackfin/include/asm/clock.h | 78 ++++
arch/blackfin/include/asm/dma.h | 24 +-
arch/blackfin/include/asm/gpio.h | 62 +--
arch/blackfin/include/asm/mach-bf561/BF561_def.h | 2 +
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 5 +
arch/blackfin/include/asm/portmux.h | 5 -
arch/blackfin/{cpu => include/asm}/serial.h | 23 +-
arch/blackfin/{cpu => include/asm}/serial1.h | 48 +--
arch/blackfin/{cpu => include/asm}/serial4.h | 27 +-
arch/blackfin/include/asm/soft_switch.h | 18 +
arch/blackfin/lib/board.c | 6 +-
arch/blackfin/lib/clocks.c | 12 +-
arch/blackfin/lib/string.c | 9 +-
board/bf609-ezkit/soft_switch.c | 171 ++++++++
board/bf609-ezkit/soft_switch.h | 80 ++++
common/Makefile | 1 +
common/cmd_softswitch.c | 41 ++
doc/README.watchdog | 3 +
drivers/gpio/Makefile | 1 +
drivers/gpio/adi_gpio2.c | 440 ++++++++++++++++++++
drivers/net/bfin_mac.c | 2 -
drivers/serial/Makefile | 1 +
.../cpu/serial.c => drivers/serial/serial_bfin.c | 110 +++--
drivers/spi/bfin_spi.c | 105 +----
drivers/watchdog/Makefile | 1 +
.../cpu/watchdog.c => drivers/watchdog/bfin_wdt.c | 7 +-
include/configs/bf527-ezkit.h | 12 +-
include/configs/bf537-stamp.h | 10 +-
include/configs/bf548-ezkit.h | 25 +-
include/configs/bf561-ezkit.h | 5 +
include/configs/bf609-ezkit.h | 10 +
include/configs/bfin_adi_common.h | 14 +-
include/watchdog.h | 3 +-
38 files changed, 1163 insertions(+), 479 deletions(-)
create mode 100644 arch/blackfin/include/asm/clock.h
rename arch/blackfin/{cpu => include/asm}/serial.h (82%)
rename arch/blackfin/{cpu => include/asm}/serial1.h (94%)
rename arch/blackfin/{cpu => include/asm}/serial4.h (86%)
create mode 100644 arch/blackfin/include/asm/soft_switch.h
create mode 100644 board/bf609-ezkit/soft_switch.c
create mode 100644 board/bf609-ezkit/soft_switch.h
create mode 100644 common/cmd_softswitch.c
create mode 100644 drivers/gpio/adi_gpio2.c
rename arch/blackfin/cpu/serial.c => drivers/serial/serial_bfin.c (79%)
rename arch/blackfin/cpu/watchdog.c => drivers/watchdog/bfin_wdt.c (64%)
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2015-11-12 15:49 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-11 6:34 [U-Boot] Pull request: u-boot-blackfin Sonic Zhang
2015-11-12 15:49 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2015-02-02 7:19 Sonic Zhang
2015-02-02 18:59 ` Tom Rini
2014-11-10 4:42 Sonic Zhang
2014-11-10 21:28 ` Tom Rini
2014-08-04 1:56 Sonic Zhang
2014-08-06 12:38 ` Tom Rini
2014-08-07 7:11 ` Sonic Zhang
2014-02-07 3:33 Sonic Zhang
2014-02-07 13:36 ` Tom Rini
2013-12-16 3:49 Sonic Zhang
2013-12-16 14:17 ` Tom Rini
2013-12-06 8:14 Sonic Zhang
2013-12-06 13:28 ` Tom Rini
2013-11-04 9:09 Sonic Zhang
2013-11-04 14:58 ` Tom Rini
2013-07-31 9:14 Sonic Zhang
2013-08-01 13:18 ` Tom Rini
2013-05-09 3:13 Sonic Zhang
2013-05-09 12:09 ` Tom Rini
2013-05-11 15:27 ` Sonic Zhang
2013-05-11 16:20 ` Tom Rini
2013-05-13 4:11 ` Sonic Zhang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.