From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] pull request: u-boot-uniphier/master
Date: Sun, 24 Apr 2016 10:04:05 +0900 [thread overview]
Message-ID: <CAK7LNATNLciZha47o0xSB0KWyjcOWjXr6=kDuHBcOO+WPs0-kg@mail.gmail.com> (raw)
Hi Tom,
Finally, this series adds support for the first ARMv8 SoC
from Socionext Inc.
The following changes since commit 65341967ce9ef2656c61dcd3126536e8865c349d:
Merge branch 'master' of git://git.denx.de/u-boot-x86 (2016-04-22
07:25:18 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-uniphier.git master
for you to fetch changes up to b75e072c1c53cade2c3944433d852d7d6046661b:
ARM: uniphier: speed up loading kernel image from NOR device
(2016-04-24 09:56:47 +0900)
----------------------------------------------------------------
Masahiro Yamada (13):
pinctrl: uniphier: rename function/array names
pinctrl: uniphier: fix NAND and SD pin-mux settings for PH1-LD11/LD20
ARM: uniphier: avoid unaligned access to DT on 64bit SoC
ARM: dts: uniphier: use Ref Daughter board on PH1-LD20 Ref board
ARM: dts: uniphier: move aliases node up to satisfy fdtgrep
ARM: uniphier: add sg_set_iectrl_range()
ARM: uniphier: carry on booting for Unknown boot mode
ARM: uniphier: rework uniphier_set_fdt_file()
ARM: uniphier: add PH1-LD20 SoC support
ARM: uniphier: reserve the last 64 byte of SDRAM
ARM: dts: uniphier: add SD controller node for PH1-LD20
clk: uniphier: add Media I/O clock driver support for PH1-LD20
ARM: uniphier: speed up loading kernel image from NOR device
arch/arm/dts/uniphier-ph1-ld11-ref.dts | 18 +-
arch/arm/dts/uniphier-ph1-ld20-ref.dts | 19 +-
arch/arm/dts/uniphier-ph1-ld20.dtsi | 17 ++
arch/arm/mach-uniphier/Kconfig | 5 +
arch/arm/mach-uniphier/Makefile | 1 +
arch/arm/mach-uniphier/arm64/Makefile | 10 +
arch/arm/mach-uniphier/arm64/arm-cci500.c | 41 +++
arch/arm/mach-uniphier/arm64/mem_map.c | 28 ++
arch/arm/mach-uniphier/arm64/smp.S | 19 ++
arch/arm/mach-uniphier/arm64/smp_kick_cpus.c | 31 +++
arch/arm/mach-uniphier/arm64/timer.c | 38 +++
arch/arm/mach-uniphier/board_common.c | 6 +-
arch/arm/mach-uniphier/board_early_init_f.c | 8 +
arch/arm/mach-uniphier/board_late_init.c | 66 ++---
arch/arm/mach-uniphier/boards.c | 25 ++
arch/arm/mach-uniphier/boot-mode/Makefile | 1 +
arch/arm/mach-uniphier/boot-mode/boot-device.h | 2 +
arch/arm/mach-uniphier/boot-mode/boot-mode-ld20.c | 77 ++++++
arch/arm/mach-uniphier/boot-mode/boot-mode.c | 4 +
arch/arm/mach-uniphier/boot-mode/cmd_pinmon.c | 5 +
arch/arm/mach-uniphier/clk/Makefile | 1 +
arch/arm/mach-uniphier/clk/clk-ld20.c | 14 +
arch/arm/mach-uniphier/cpu_info.c | 2 +-
arch/arm/mach-uniphier/dram/Makefile | 1 +
arch/arm/mach-uniphier/dram/ddrphy-ld20-regs.h | 41 +++
arch/arm/mach-uniphier/dram/umc-ld20-regs.h | 73 ++++++
arch/arm/mach-uniphier/dram/umc-ld20.c | 306 ++++++++++++++++++++++
arch/arm/mach-uniphier/dram_init.c | 10 +-
arch/arm/mach-uniphier/early-clk/Makefile | 1 +
arch/arm/mach-uniphier/early-clk/early-clk-ld20.c | 30 +++
arch/arm/mach-uniphier/init.h | 7 +
arch/arm/mach-uniphier/init/Makefile | 1 +
arch/arm/mach-uniphier/init/init-ld20.c | 53 ++++
arch/arm/mach-uniphier/init/init.c | 5 +
arch/arm/mach-uniphier/memconf/Makefile | 1 +
arch/arm/mach-uniphier/memconf/memconf-pxs2.c | 3 +
arch/arm/mach-uniphier/pinctrl/Makefile | 1 +
arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c | 46 ++++
arch/arm/mach-uniphier/sbc/Makefile | 1 +
arch/arm/mach-uniphier/sg-regs.h | 11 +-
configs/uniphier_ld20_defconfig | 28 ++
drivers/clk/uniphier/clk-uniphier-mio.c | 4 +
drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c | 8 +-
drivers/pinctrl/uniphier/pinctrl-uniphier-ld4.c | 34 +--
drivers/pinctrl/uniphier/pinctrl-uniphier-ld6b.c | 34 +--
drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c | 34 +--
drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c | 34 +--
drivers/pinctrl/uniphier/pinctrl-uniphier-pxs2.c | 34 +--
drivers/pinctrl/uniphier/pinctrl-uniphier-sld8.c | 34 +--
include/configs/uniphier.h | 52 +++-
50 files changed, 1151 insertions(+), 174 deletions(-)
create mode 100644 arch/arm/mach-uniphier/arm64/Makefile
create mode 100644 arch/arm/mach-uniphier/arm64/arm-cci500.c
create mode 100644 arch/arm/mach-uniphier/arm64/mem_map.c
create mode 100644 arch/arm/mach-uniphier/arm64/smp.S
create mode 100644 arch/arm/mach-uniphier/arm64/smp_kick_cpus.c
create mode 100644 arch/arm/mach-uniphier/arm64/timer.c
create mode 100644 arch/arm/mach-uniphier/boot-mode/boot-mode-ld20.c
create mode 100644 arch/arm/mach-uniphier/clk/clk-ld20.c
create mode 100644 arch/arm/mach-uniphier/dram/ddrphy-ld20-regs.h
create mode 100644 arch/arm/mach-uniphier/dram/umc-ld20-regs.h
create mode 100644 arch/arm/mach-uniphier/dram/umc-ld20.c
create mode 100644 arch/arm/mach-uniphier/early-clk/early-clk-ld20.c
create mode 100644 arch/arm/mach-uniphier/init/init-ld20.c
create mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c
create mode 100644 configs/uniphier_ld20_defconfig
--
Best Regards
Masahiro Yamada
next reply other threads:[~2016-04-24 1:04 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-24 1:04 Masahiro Yamada [this message]
2016-04-26 0:15 ` [U-Boot] pull request: u-boot-uniphier/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2017-04-21 17:08 Masahiro Yamada
2017-04-25 12:56 ` Tom Rini
2017-03-13 20:57 Masahiro Yamada
2017-03-16 20:39 ` Tom Rini
2017-02-23 2:03 Masahiro Yamada
2017-02-27 1:37 ` Tom Rini
2017-01-29 12:15 Masahiro Yamada
2017-01-29 17:39 ` Tom Rini
2017-01-22 12:55 Masahiro Yamada
2017-01-23 2:21 ` Tom Rini
2017-01-17 16:36 Masahiro Yamada
2017-01-18 2:56 ` Tom Rini
2016-12-11 9:04 Masahiro Yamada
2016-12-12 15:55 ` Tom Rini
2016-10-29 8:29 Masahiro Yamada
2016-10-30 12:11 ` Tom Rini
2016-10-18 16:00 Masahiro Yamada
2016-10-19 1:53 ` Tom Rini
2016-10-10 1:14 Masahiro Yamada
2016-10-13 0:48 ` Tom Rini
2016-09-22 16:03 Masahiro Yamada
2016-09-23 1:58 ` Tom Rini
2016-09-14 14:13 Masahiro Yamada
2016-09-15 8:40 ` Masahiro Yamada
2016-09-15 11:13 ` Tom Rini
2016-08-28 4:29 Masahiro Yamada
2016-08-29 12:02 ` Tom Rini
2016-08-11 13:16 Masahiro Yamada
2016-08-11 22:44 ` Tom Rini
2016-07-23 15:55 Masahiro Yamada
2016-07-24 0:20 ` Tom Rini
2016-06-30 15:08 Masahiro Yamada
2016-07-01 20:47 ` Masahiro Yamada
2016-06-19 22:27 Masahiro Yamada
2016-06-20 2:13 ` Tom Rini
2016-06-08 23:27 Masahiro Yamada
2016-06-09 18:02 ` Tom Rini
2016-05-25 15:52 Masahiro Yamada
2016-05-26 15:49 ` Tom Rini
2016-04-30 16:18 Masahiro Yamada
2016-05-02 23:31 ` Tom Rini
2016-03-31 16:25 Masahiro Yamada
2016-04-01 17:00 ` Tom Rini
2016-03-23 16:56 Masahiro Yamada
2016-03-23 22:12 ` Tom Rini
2016-03-08 16:18 Masahiro Yamada
2016-03-08 19:59 ` Tom Rini
2016-02-28 19:03 Masahiro Yamada
2016-02-29 9:06 ` Masahiro Yamada
2016-02-29 14:10 ` Tom Rini
2016-02-14 8:54 Masahiro Yamada
2016-02-14 18:56 ` Tom Rini
2016-01-19 23:54 Masahiro Yamada
2016-01-20 1:41 ` Tom Rini
2016-01-12 17:05 Masahiro Yamada
2016-01-12 20:10 ` Tom Rini
2015-12-22 15:22 Masahiro Yamada
2015-12-22 15:59 ` Tom Rini
2015-12-23 2:00 ` Masahiro Yamada
2015-12-27 15:10 ` Tom Rini
2015-11-11 14:44 Masahiro Yamada
2015-11-11 14:55 ` Tom Rini
2015-09-23 14:32 [U-Boot] Pull " Masahiro Yamada
2015-09-24 12:17 ` Masahiro Yamada
2015-09-24 13:19 ` Tom Rini
2015-08-30 15:53 [U-Boot] pull " Masahiro Yamada
2015-08-30 16:07 ` Tom Rini
2015-07-23 14:49 Masahiro Yamada
2015-07-23 19:30 ` Tom Rini
2015-07-01 16:16 [U-Boot] Pull " Masahiro Yamada
2015-07-01 21:56 ` Tom Rini
2015-05-30 18:05 [U-Boot] pull " Masahiro Yamada
2015-06-02 12:54 ` Tom Rini
[not found] <CAMhH57TkcrHGxkjF9DcGmCc=PV+JaZV7bmG5T3QGrAEwEHB=BQ@mail.gmail.com>
2015-01-22 16:16 ` [U-Boot] Pull " Masahiro YAMADA
2015-01-23 21:56 ` Tom Rini
2014-11-27 17:33 Masahiro YAMADA
2014-12-01 20:23 ` Tom Rini
2014-11-11 15:46 Masahiro YAMADA
2014-11-11 20:49 ` Tom Rini
2014-10-29 14:00 Masahiro YAMADA
2014-11-04 2:33 ` Tom Rini
2014-10-05 5:32 Masahiro YAMADA
2014-10-07 10:09 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAK7LNATNLciZha47o0xSB0KWyjcOWjXr6=kDuHBcOO+WPs0-kg@mail.gmail.com' \
--to=yamada.masahiro@socionext.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.