From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] pull request: u-boot-uniphier/master
Date: Mon, 29 Feb 2016 18:06:10 +0900 [thread overview]
Message-ID: <CAK7LNATf2-NymH80tOW3tT456+v+ysNeF0dSyPMyz_rCd2h1kg@mail.gmail.com> (raw)
In-Reply-To: <CAK7LNAQ39nZvWCddXouih+i4SVTWC_1TQGFk_6xMZsnS1ghRwA@mail.gmail.com>
Hi Tom,
I found a small bug in this series.
If it is not too late, please let me fix it and do a 2nd round.
If it is, it's OK, I will send a follow-up patch.
2016-02-29 4:03 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>:
> Hi Tom,
>
> Here is a bunch of UniPhier updates which include GPIO driver support,
> MMC driver support, DRAM init code clean-ups, etc. Please pull.
>
>
> The following changes since commit 50dc8677d769be6e2b34f49b6c43ad1e977bdc51:
>
> Merge git://git.denx.de/u-boot-usb (2016-02-26 18:08:43 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-uniphier.git master
>
> for you to fetch changes up to 6a9220cfe2356aace1b92ec74a1852d7d2659a03:
>
> ARM: uniphier: fix warnings reported by aarch64 compiler (2016-02-29
> 03:50:16 +0900)
>
> ----------------------------------------------------------------
> Masahiro Yamada (38):
> ARM: dts: uniphier: rework System Bus nodes
> gpio: uniphier: add driver for UniPhier GPIO controller
> gpio: do not include <asm/arch/gpio.h> for UniPhier
> ARM: uniphier: enable GPIO command and driver for UniPhier SoCs
> ARM: dts: uniphier: add GPIO controller nodes
> mmc: uniphier: add driver for UniPhier SD/MMC host controller
> ARM: uniphier: enable UniPhier SD/MMC host driver
> ARM: dts: uniphier: add SD/MMC host controller nodes
> ARM: uniphier: add eMMC boot support
> ARM: uniphier: add a command to find the first MMC (non-SD) device
> ARM: uniphier: add emmcupdate command
> ARM: uniphier: default to environment in eMMC
> ARM: uniphier: remove unused umc_polling()
> ARM: uniphier: rework struct uniphier_board_data
> ARM: uniphier: optimize ProXstream2 UMC init code with "for" loop
> ARM: uniphier: use pr_err() where possible
> ARM: uniphier: refactor UMC init code for ProXstream2
> ARM: uniphier: remove UMC_INITCTL* and UMC_DRMR* settings
> ARM: uniphier: disable debug circuit clocks for PH1-Pro4
> ARM: uniphier: add a field to specify DDR3+
> ARM: uniphier: merge DDR PHY init code for 3 SoCs
> ARM: uniphier: remove unused argument of ph1_ld4_ddrphy_init()
> ARM: uniphier: refactor DDR-PHY init code
> ARM: uniphier: refactor UMC init code for PH1-sLD8
> ARM: uniphier: support more DRAM use cases for PH1-sLD8
> ARM: uniphier: refactor UMC init code for PH1-LD4
> ARM: uniphier: optimize PH1-sLD8 UMC init code with "for" loop
> ARM: uniphier: optimize PH1-LD4 UMC init code with "for" loop
> ARM: uniphier: optimize PH1-Pro4 UMC init code with "for" loop
> ARM: uniphier: rework DRAM size handling in UMC init code
> ARM: uniphier: remove unused macros for UMC base addresses
> ARM: uniphier: deprecate umc_dram_init_{start, poll}
> ARM: uniphier: rename variable for DRAM controller base address
> ARM: uniphier: merge two defconfig files
> ARM: uniphier: rework UniPhier SoC select in Kconfig
> ARM: uniphier: rename PH1-LD10/PH1-sLD11 to PH1-LD20/PH1-LD11
> ARM: uniphier: prepare directory structure for ARMv8 SoC support
> ARM: uniphier: fix warnings reported by aarch64 compiler
>
> arch/arm/Kconfig | 3 +-
> arch/arm/dts/uniphier-common32.dtsi | 19 +-
> arch/arm/dts/uniphier-ph1-ld4-ref.dts | 4 +
> arch/arm/dts/uniphier-ph1-ld4.dtsi | 137 +++++++
> arch/arm/dts/uniphier-ph1-ld6b-ref.dts | 4 +
> arch/arm/dts/uniphier-ph1-pro4-ace.dts | 4 +
> arch/arm/dts/uniphier-ph1-pro4-ref.dts | 8 +
> arch/arm/dts/uniphier-ph1-pro4-sanji.dts | 16 +
> arch/arm/dts/uniphier-ph1-pro4.dtsi | 240 ++++++++++++
> arch/arm/dts/uniphier-ph1-pro5-4kbox.dts | 8 +
> arch/arm/dts/uniphier-ph1-pro5.dtsi | 227 +++++++++++
> arch/arm/dts/uniphier-ph1-sld3-ref.dts | 4 +
> arch/arm/dts/uniphier-ph1-sld3.dtsi | 151 +++++++-
> arch/arm/dts/uniphier-ph1-sld8-ref.dts | 4 +
> arch/arm/dts/uniphier-ph1-sld8.dtsi | 137 +++++++
> arch/arm/dts/uniphier-pinctrl.dtsi | 15 +
> arch/arm/dts/uniphier-proxstream2-gentil.dts | 16 +
> arch/arm/dts/uniphier-proxstream2-vodka.dts | 16 +
> arch/arm/dts/uniphier-proxstream2.dtsi | 220 +++++++++++
> arch/arm/include/asm/gpio.h | 2 +
> arch/arm/mach-uniphier/Kconfig | 66 ++--
> arch/arm/mach-uniphier/Makefile | 9 +-
> arch/arm/mach-uniphier/arm32/Makefile | 13 +
> arch/arm/mach-uniphier/{ => arm32}/arm-mpcore.h | 0
> arch/arm/mach-uniphier/{ => arm32}/cache_uniphier.c | 0
> arch/arm/mach-uniphier/{ => arm32}/debug_ll.S | 0
> arch/arm/mach-uniphier/{ => arm32}/late_lowlevel_init.S | 0
> arch/arm/mach-uniphier/{ => arm32}/lowlevel_init.S | 0
> arch/arm/mach-uniphier/{ => arm32}/ssc-regs.h | 0
> arch/arm/mach-uniphier/{ => arm32}/timer.c | 0
> arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c | 2 +-
> arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c | 2 +-
> arch/arm/mach-uniphier/boards.c | 178 +++++----
> arch/arm/mach-uniphier/boot-mode/boot-mode.c | 64 ++++
> arch/arm/mach-uniphier/cpu_info.c | 4 +-
> arch/arm/mach-uniphier/dram/Makefile | 4 +-
> arch/arm/mach-uniphier/dram/ddrphy-ph1-ld4.c | 80 ++--
> arch/arm/mach-uniphier/dram/ddrphy-ph1-pro4.c | 67 ----
> arch/arm/mach-uniphier/dram/ddrphy-ph1-sld8.c | 78 ----
> arch/arm/mach-uniphier/dram/ddrphy-regs.h | 5 +-
> arch/arm/mach-uniphier/dram/umc-ph1-ld4.c | 225 +++++------
> arch/arm/mach-uniphier/dram/umc-ph1-pro4.c | 182 +++++----
> arch/arm/mach-uniphier/dram/umc-ph1-sld8.c | 218 ++++++-----
> arch/arm/mach-uniphier/dram/umc-proxstream2.c | 217 +++++------
> arch/arm/mach-uniphier/dram/umc-regs.h | 48 +--
> arch/arm/mach-uniphier/dram_init.c | 5 +-
> arch/arm/mach-uniphier/init.h | 24 +-
> arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c | 6 +-
> arch/arm/mach-uniphier/memconf/memconf-proxstream2.c | 6 +-
> arch/arm/mach-uniphier/memconf/memconf.c | 14 +-
> arch/arm/mach-uniphier/micro-support-card.c | 3 +-
> arch/arm/mach-uniphier/sg-regs.h | 2 +-
> arch/arm/mach-uniphier/soc-info.h | 16 +-
> arch/arm/mach-uniphier/soc_info.c | 8 +-
> configs/uniphier_ld4_sld8_defconfig | 6 +-
> configs/uniphier_pro4_defconfig | 3 +
> configs/uniphier_pro5_defconfig | 30 --
> configs/uniphier_pxs2_ld6b_defconfig | 6 +-
> configs/uniphier_sld3_defconfig | 3 +
> doc/README.uniphier | 20 +-
> drivers/gpio/Kconfig | 6 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-uniphier.c | 147 ++++++++
> drivers/mmc/Kconfig | 6 +
> drivers/mmc/Makefile | 1 +
> drivers/mmc/uniphier-sd.c | 751
> +++++++++++++++++++++++++++++++++++++
> include/configs/uniphier.h | 26 +-
> 67 files changed, 2953 insertions(+), 834 deletions(-)
> create mode 100644 arch/arm/mach-uniphier/arm32/Makefile
> rename arch/arm/mach-uniphier/{ => arm32}/arm-mpcore.h (100%)
> rename arch/arm/mach-uniphier/{ => arm32}/cache_uniphier.c (100%)
> rename arch/arm/mach-uniphier/{ => arm32}/debug_ll.S (100%)
> rename arch/arm/mach-uniphier/{ => arm32}/late_lowlevel_init.S (100%)
> rename arch/arm/mach-uniphier/{ => arm32}/lowlevel_init.S (100%)
> rename arch/arm/mach-uniphier/{ => arm32}/ssc-regs.h (100%)
> rename arch/arm/mach-uniphier/{ => arm32}/timer.c (100%)
> delete mode 100644 arch/arm/mach-uniphier/dram/ddrphy-ph1-pro4.c
> delete mode 100644 arch/arm/mach-uniphier/dram/ddrphy-ph1-sld8.c
> delete mode 100644 configs/uniphier_pro5_defconfig
> create mode 100644 drivers/gpio/gpio-uniphier.c
> create mode 100644 drivers/mmc/uniphier-sd.c
>
>
> --
> Best Regards
> Masahiro Yamada
--
Best Regards
Masahiro Yamada
next prev parent reply other threads:[~2016-02-29 9:06 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-28 19:03 [U-Boot] pull request: u-boot-uniphier/master Masahiro Yamada
2016-02-29 9:06 ` Masahiro Yamada [this message]
2016-02-29 14:10 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2017-04-21 17:08 Masahiro Yamada
2017-04-25 12:56 ` Tom Rini
2017-03-13 20:57 Masahiro Yamada
2017-03-16 20:39 ` Tom Rini
2017-02-23 2:03 Masahiro Yamada
2017-02-27 1:37 ` Tom Rini
2017-01-29 12:15 Masahiro Yamada
2017-01-29 17:39 ` Tom Rini
2017-01-22 12:55 Masahiro Yamada
2017-01-23 2:21 ` Tom Rini
2017-01-17 16:36 Masahiro Yamada
2017-01-18 2:56 ` Tom Rini
2016-12-11 9:04 Masahiro Yamada
2016-12-12 15:55 ` Tom Rini
2016-10-29 8:29 Masahiro Yamada
2016-10-30 12:11 ` Tom Rini
2016-10-18 16:00 Masahiro Yamada
2016-10-19 1:53 ` Tom Rini
2016-10-10 1:14 Masahiro Yamada
2016-10-13 0:48 ` Tom Rini
2016-09-22 16:03 Masahiro Yamada
2016-09-23 1:58 ` Tom Rini
2016-09-14 14:13 Masahiro Yamada
2016-09-15 8:40 ` Masahiro Yamada
2016-09-15 11:13 ` Tom Rini
2016-08-28 4:29 Masahiro Yamada
2016-08-29 12:02 ` Tom Rini
2016-08-11 13:16 Masahiro Yamada
2016-08-11 22:44 ` Tom Rini
2016-07-23 15:55 Masahiro Yamada
2016-07-24 0:20 ` Tom Rini
2016-06-30 15:08 Masahiro Yamada
2016-07-01 20:47 ` Masahiro Yamada
2016-06-19 22:27 Masahiro Yamada
2016-06-20 2:13 ` Tom Rini
2016-06-08 23:27 Masahiro Yamada
2016-06-09 18:02 ` Tom Rini
2016-05-25 15:52 Masahiro Yamada
2016-05-26 15:49 ` Tom Rini
2016-04-30 16:18 Masahiro Yamada
2016-05-02 23:31 ` Tom Rini
2016-04-24 1:04 Masahiro Yamada
2016-04-26 0:15 ` Tom Rini
2016-03-31 16:25 Masahiro Yamada
2016-04-01 17:00 ` Tom Rini
2016-03-23 16:56 Masahiro Yamada
2016-03-23 22:12 ` Tom Rini
2016-03-08 16:18 Masahiro Yamada
2016-03-08 19:59 ` Tom Rini
2016-02-14 8:54 Masahiro Yamada
2016-02-14 18:56 ` Tom Rini
2016-01-19 23:54 Masahiro Yamada
2016-01-20 1:41 ` Tom Rini
2016-01-12 17:05 Masahiro Yamada
2016-01-12 20:10 ` Tom Rini
2015-12-22 15:22 Masahiro Yamada
2015-12-22 15:59 ` Tom Rini
2015-12-23 2:00 ` Masahiro Yamada
2015-12-27 15:10 ` Tom Rini
2015-11-11 14:44 Masahiro Yamada
2015-11-11 14:55 ` Tom Rini
2015-09-23 14:32 [U-Boot] Pull " Masahiro Yamada
2015-09-24 12:17 ` Masahiro Yamada
2015-09-24 13:19 ` Tom Rini
2015-08-30 15:53 [U-Boot] pull " Masahiro Yamada
2015-08-30 16:07 ` Tom Rini
2015-07-23 14:49 Masahiro Yamada
2015-07-23 19:30 ` Tom Rini
2015-07-01 16:16 [U-Boot] Pull " Masahiro Yamada
2015-07-01 21:56 ` Tom Rini
2015-05-30 18:05 [U-Boot] pull " Masahiro Yamada
2015-06-02 12:54 ` Tom Rini
[not found] <CAMhH57TkcrHGxkjF9DcGmCc=PV+JaZV7bmG5T3QGrAEwEHB=BQ@mail.gmail.com>
2015-01-22 16:16 ` [U-Boot] Pull " Masahiro YAMADA
2015-01-23 21:56 ` Tom Rini
2014-11-27 17:33 Masahiro YAMADA
2014-12-01 20:23 ` Tom Rini
2014-11-11 15:46 Masahiro YAMADA
2014-11-11 20:49 ` Tom Rini
2014-10-29 14:00 Masahiro YAMADA
2014-11-04 2:33 ` Tom Rini
2014-10-05 5:32 Masahiro YAMADA
2014-10-07 10:09 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAK7LNATf2-NymH80tOW3tT456+v+ysNeF0dSyPMyz_rCd2h1kg@mail.gmail.com \
--to=yamada.masahiro@socionext.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.