* [GIT PULL 1/4] Broadcom defconfig changes for 5.1
@ 2019-02-02 17:22 Florian Fainelli
2019-02-02 17:22 ` [GIT PULL 2/4] Broadcom devicetree " Florian Fainelli
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Florian Fainelli @ 2019-02-02 17:22 UTC (permalink / raw)
To: arm
Cc: Stefan Wahren, Florian Fainelli, arnd, khilman, Eric Anholt,
bcm-kernel-feedback-list, olof, linux-arm-kernel
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.1/defconfig
for you to fetch changes up to 6e2111e72e8279ebd6efcaf3e579a2afbd1dbf7a:
Merge tag 'tags/bcm2835-defconfig-next-2018-11-27' into defconfig/next (2019-01-31 21:04:22 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for 5.1, please pull the following:
- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
devices
----------------------------------------------------------------
Florian Fainelli (1):
Merge tag 'tags/bcm2835-defconfig-next-2018-11-27' into defconfig/next
Stefan Wahren (1):
ARM: bcm2835_defconfig: Enable BCM2835 MMAL-based V4L2 camera driver
arch/arm/configs/bcm2835_defconfig | 3 +++
1 file changed, 3 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL 2/4] Broadcom devicetree changes for 5.1
2019-02-02 17:22 [GIT PULL 1/4] Broadcom defconfig changes for 5.1 Florian Fainelli
@ 2019-02-02 17:22 ` Florian Fainelli
2019-02-15 13:51 ` Arnd Bergmann
2019-02-02 17:22 ` [GIT PULL 3/4] Broadcom devicetree-arm64 " Florian Fainelli
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Florian Fainelli @ 2019-02-02 17:22 UTC (permalink / raw)
To: arm
Cc: Stefan Wahren, Rob Herring, Hao Dong, Florian Fainelli, arnd,
Dan Haab, olof, Eric Anholt, bcm-kernel-feedback-list,
Peter Robinson, Rafał Miłecki, Dan Haab, khilman,
linux-arm-kernel
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.1/devicetree
for you to fetch changes up to 0a37cac509063da4696937482ab0d4e960ba358d:
Merge tag 'tags/bcm2835-dt-next-2019-02-01' into devicetree/next (2019-02-01 11:25:26 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.1, please pull the following:
- Dan relicenses the Luxul DTS files to GPL 2.0+/MIT
- Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
BCM4366 radio
- Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
also provides a bunch of DTC warning fixes for the different RPi DTS(i)
files and adds support for missing GPIO lines on RPi 2/3
----------------------------------------------------------------
Dan Haab (1):
ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT
Florian Fainelli (1):
Merge tag 'tags/bcm2835-dt-next-2019-02-01' into devicetree/next
Hao Dong (1):
ARM: dts: BCM5301X: Add basic DT for Phicomm K3
Stefan Wahren (9):
dt-bindings: bcm: Add Raspberry Pi 3 A+
ARM: dts: add Raspberry Pi 3 A+
ARM: dts: bcm283x: Fix DTC warning for memory node
ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells
ARM: dts: bcm2835: Fix labels for GPIO 0,1
ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug
ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED
ARM: dts: bcm283x: Add missing GPIO line names
ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 4 +-
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 4 +-
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 11 +-
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 4 +-
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 +-
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 68 +++++++-
arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 175 +++++++++++++++++++++
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 74 ++++++++-
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 74 ++++++++-
arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 2 +-
arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 71 +++++++++
arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 3 +-
arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 3 +-
15 files changed, 475 insertions(+), 28 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL 3/4] Broadcom devicetree-arm64 changes for 5.1
2019-02-02 17:22 [GIT PULL 1/4] Broadcom defconfig changes for 5.1 Florian Fainelli
2019-02-02 17:22 ` [GIT PULL 2/4] Broadcom devicetree " Florian Fainelli
@ 2019-02-02 17:22 ` Florian Fainelli
2019-02-15 14:28 ` Arnd Bergmann
2019-02-02 17:22 ` [GIT PULL 4/4] Broadcom drivers " Florian Fainelli
2019-02-15 15:58 ` [GIT PULL 1/4] Broadcom defconfig " Arnd Bergmann
3 siblings, 1 reply; 8+ messages in thread
From: Florian Fainelli @ 2019-02-02 17:22 UTC (permalink / raw)
To: arm
Cc: Stefan Wahren, Florian Fainelli, arnd, khilman, Eric Anholt,
bcm-kernel-feedback-list, olof, linux-arm-kernel
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.1/devicetree-arm64
for you to fetch changes up to c4ba5268e7e7d543024ba8f34fbd291375f6040d:
Merge tag 'tags/bcm2835-dt-64-next-2019-02-01' into devicetree-arm64/next (2019-02-02 09:20:38 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 5.1, please pull the following:
- Stefan adds support for the Raspberry Pi 3 A+ by using the same
mechanism of creating a symbolic reference to the ARM 32-bit DTS file
----------------------------------------------------------------
Florian Fainelli (1):
Merge tag 'tags/bcm2835-dt-64-next-2019-02-01' into devicetree-arm64/next
Stefan Wahren (2):
ARM: dts: add Raspberry Pi 3 A+
arm64: dts: broadcom: Add reference to RPi 3 A+
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 175 +++++++++++++++++++++
arch/arm64/boot/dts/broadcom/Makefile | 3 +-
.../boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts | 2 +
4 files changed, 180 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL 4/4] Broadcom drivers changes for 5.1
2019-02-02 17:22 [GIT PULL 1/4] Broadcom defconfig changes for 5.1 Florian Fainelli
2019-02-02 17:22 ` [GIT PULL 2/4] Broadcom devicetree " Florian Fainelli
2019-02-02 17:22 ` [GIT PULL 3/4] Broadcom devicetree-arm64 " Florian Fainelli
@ 2019-02-02 17:22 ` Florian Fainelli
2019-02-15 17:01 ` Arnd Bergmann
2019-02-15 15:58 ` [GIT PULL 1/4] Broadcom defconfig " Arnd Bergmann
3 siblings, 1 reply; 8+ messages in thread
From: Florian Fainelli @ 2019-02-02 17:22 UTC (permalink / raw)
To: arm
Cc: Stefan Wahren, Rob Herring, Florian Fainelli, arnd,
Scott Branden, khilman, Phil Elwell, Eric Anholt, Wei Yongjun,
linux-arm-kernel, olof, bcm-kernel-feedback-list, Guenter Roeck
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.1/drivers
for you to fetch changes up to 50de64947f40f869dc5b9306891b750f317135ef:
Merge tag 'tags/bcm2835-drivers-next-2019-02-01' into drivers/next (2019-02-01 11:29:21 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
----------------------------------------------------------------
Eric Anholt (5):
dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
Florian Fainelli (1):
Merge tag 'tags/bcm2835-drivers-next-2019-02-01' into drivers/next
Stefan Wahren (3):
soc: bcm2835: sync firmware properties with downstream
firmware: raspberrypi: notify VC4 firmware of a reboot
soc: bcm: Make PM driver default for BCM2835
Wei Yongjun (1):
soc: bcm: bcm2835-pm: Make local symbol static
.../bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 ++
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 -
arch/arm/boot/dts/bcm283x.dtsi | 17 +-
arch/arm/mach-bcm/Kconfig | 1 +
drivers/firmware/raspberrypi.c | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/bcm2835-pm.c | 92 +++
drivers/soc/bcm/Kconfig | 12 +
drivers/soc/bcm/Makefile | 1 +
drivers/soc/bcm/bcm2835-power.c | 661 +++++++++++++++++++++
drivers/watchdog/bcm2835_wdt.c | 26 +-
include/dt-bindings/soc/bcm2835-pm.h | 28 +
include/linux/mfd/bcm2835-pm.h | 14 +
include/soc/bcm2835/raspberrypi-firmware.h | 4 +
14 files changed, 894 insertions(+), 24 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
create mode 100644 drivers/mfd/bcm2835-pm.c
create mode 100644 drivers/soc/bcm/bcm2835-power.c
create mode 100644 include/dt-bindings/soc/bcm2835-pm.h
create mode 100644 include/linux/mfd/bcm2835-pm.h
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL 2/4] Broadcom devicetree changes for 5.1
2019-02-02 17:22 ` [GIT PULL 2/4] Broadcom devicetree " Florian Fainelli
@ 2019-02-15 13:51 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2019-02-15 13:51 UTC (permalink / raw)
To: Florian Fainelli
Cc: Stefan Wahren, Rob Herring, Hao Dong, Dan Haab, Olof Johansson,
Eric Anholt, arm-soc, bcm-kernel-feedback-list, Peter Robinson,
Rafał Miłecki, Dan Haab, Kevin Hilman, Linux ARM
On Sat, Feb 2, 2019 at 6:22 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
>
> Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.1/devicetree
>
> for you to fetch changes up to 0a37cac509063da4696937482ab0d4e960ba358d:
>
> Merge tag 'tags/bcm2835-dt-next-2019-02-01' into devicetree/next (2019-02-01 11:25:26 -0800)
>
> ----------------------------------------------------------------
> This pull request contains Broadcom ARM-based SoCs Device Tree updates
> for 5.1, please pull the following:
>
> - Dan relicenses the Luxul DTS files to GPL 2.0+/MIT
>
> - Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual
> BCM4366 radio
>
> - Stefan adds support for the Raspberry Pi A+: binding and DTS files. He
> also provides a bunch of DTC warning fixes for the different RPi DTS(i)
> files and adds support for missing GPIO lines on RPi 2/3
>
Pulled into arm/dt, thanks!
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL 3/4] Broadcom devicetree-arm64 changes for 5.1
2019-02-02 17:22 ` [GIT PULL 3/4] Broadcom devicetree-arm64 " Florian Fainelli
@ 2019-02-15 14:28 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2019-02-15 14:28 UTC (permalink / raw)
To: Florian Fainelli
Cc: Stefan Wahren, Kevin Hilman, Eric Anholt, arm-soc,
bcm-kernel-feedback-list, Olof Johansson, Linux ARM
On Sat, Feb 2, 2019 at 6:22 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
> This pull request contains Broadcom ARM64-based SoCs Device Tree updates
> for 5.1, please pull the following:
>
> - Stefan adds support for the Raspberry Pi 3 A+ by using the same
> mechanism of creating a symbolic reference to the ARM 32-bit DTS file
>
Pulled into arm/dt, thanks!
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL 1/4] Broadcom defconfig changes for 5.1
2019-02-02 17:22 [GIT PULL 1/4] Broadcom defconfig changes for 5.1 Florian Fainelli
` (2 preceding siblings ...)
2019-02-02 17:22 ` [GIT PULL 4/4] Broadcom drivers " Florian Fainelli
@ 2019-02-15 15:58 ` Arnd Bergmann
3 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2019-02-15 15:58 UTC (permalink / raw)
To: Florian Fainelli
Cc: Stefan Wahren, Kevin Hilman, Eric Anholt, arm-soc,
bcm-kernel-feedback-list, Olof Johansson, Linux ARM
On Sat, Feb 2, 2019 at 6:22 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
> This pull request contains Broadcom ARM-based SoCs defconfig file
> updates for 5.1, please pull the following:
>
> - Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
> devices
>
Pulled into arm/defconfig, thanks!
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL 4/4] Broadcom drivers changes for 5.1
2019-02-02 17:22 ` [GIT PULL 4/4] Broadcom drivers " Florian Fainelli
@ 2019-02-15 17:01 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2019-02-15 17:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: Stefan Wahren, Rob Herring, Scott Branden, Kevin Hilman,
Phil Elwell, Eric Anholt, arm-soc, Wei Yongjun, Linux ARM,
Olof Johansson, bcm-kernel-feedback-list, Guenter Roeck
On Sat, Feb 2, 2019 at 6:22 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
>
> Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.1/drivers
>
> for you to fetch changes up to 50de64947f40f869dc5b9306891b750f317135ef:
>
> Merge tag 'tags/bcm2835-drivers-next-2019-02-01' into drivers/next (2019-02-01 11:29:21 -0800)
>
> ----------------------------------------------------------------
> This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
> for 5.1, please pull the following:
>
> - Stefan updates the BCM2835 SoC driver with downstream properties and
> uses that to implement a reboot notifier to tell the VC4 firmware when
> Linux on the ARM CPU is rebooting
>
> - Eric adds a proper power domain driver for the BCM283x SoCs and
> updates a bunch of drivers to have a better and clearer Device Tree
> definition to support power domains/breaking up of functionality. This
> requires converting the existing watchdog driver into a MFD and then
> breaking up the functionality into separate drivers and finally
> updating the DTS files to leverage the power domains information.
>
> - Wei provides a fix for making a symbol static
Pulled into arm/drivers, thanks!
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-02-15 17:02 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-02 17:22 [GIT PULL 1/4] Broadcom defconfig changes for 5.1 Florian Fainelli
2019-02-02 17:22 ` [GIT PULL 2/4] Broadcom devicetree " Florian Fainelli
2019-02-15 13:51 ` Arnd Bergmann
2019-02-02 17:22 ` [GIT PULL 3/4] Broadcom devicetree-arm64 " Florian Fainelli
2019-02-15 14:28 ` Arnd Bergmann
2019-02-02 17:22 ` [GIT PULL 4/4] Broadcom drivers " Florian Fainelli
2019-02-15 17:01 ` Arnd Bergmann
2019-02-15 15:58 ` [GIT PULL 1/4] Broadcom defconfig " Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.