* [GIT PULL v2 1/2] arm64: TI K3 SoC configs changes for v5.17
@ 2021-12-23 9:40 ` Vignesh Raghavendra
0 siblings, 0 replies; 8+ messages in thread
From: Vignesh Raghavendra @ 2021-12-23 9:40 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, SoC
Cc: Nishanth Menon, linux-arm-kernel, linux-kernel, Tero Kristo, arm
Hi ARM SoC maintainers,
Reroll of defconfig changes for TI K3 SoCs due for v5.17. Addressed
Arnd's comments on v1 by dropping commit touching CONFIG_SERIAL_8250_NR_UARTS
and removing PCIe related configs which cannot be built as modules.
v1: https://lore.kernel.org/linux-arm-kernel/20211217172806.10023-1-vigneshr@ti.com/
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-config-for-v5.17-v2
for you to fetch changes up to 414174b6bb6569c07d8557c4475e43b1e18b4fea:
arm64: defconfig: Enable USB controller drivers for TI K3 SoC (2021-12-22 13:13:26 +0530)
----------------------------------------------------------------
ARM64 defconfig changes for TI K3 platforms for v5.17 merge window:
- Enable drivers for USB and SERDES IPs on TI K3 SoC
----------------------------------------------------------------
Vignesh Raghavendra (1):
arm64: defconfig: Enable USB controller drivers for TI K3 SoC
arch/arm64/configs/defconfig | 7 +++++++
1 file changed, 7 insertions(+)
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL v2 1/2] arm64: TI K3 SoC configs changes for v5.17
@ 2021-12-23 9:40 ` Vignesh Raghavendra
0 siblings, 0 replies; 8+ messages in thread
From: Vignesh Raghavendra @ 2021-12-23 9:40 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, SoC
Cc: Nishanth Menon, linux-arm-kernel, linux-kernel, Tero Kristo, arm
Hi ARM SoC maintainers,
Reroll of defconfig changes for TI K3 SoCs due for v5.17. Addressed
Arnd's comments on v1 by dropping commit touching CONFIG_SERIAL_8250_NR_UARTS
and removing PCIe related configs which cannot be built as modules.
v1: https://lore.kernel.org/linux-arm-kernel/20211217172806.10023-1-vigneshr@ti.com/
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-config-for-v5.17-v2
for you to fetch changes up to 414174b6bb6569c07d8557c4475e43b1e18b4fea:
arm64: defconfig: Enable USB controller drivers for TI K3 SoC (2021-12-22 13:13:26 +0530)
----------------------------------------------------------------
ARM64 defconfig changes for TI K3 platforms for v5.17 merge window:
- Enable drivers for USB and SERDES IPs on TI K3 SoC
----------------------------------------------------------------
Vignesh Raghavendra (1):
arm64: defconfig: Enable USB controller drivers for TI K3 SoC
arch/arm64/configs/defconfig | 7 +++++++
1 file changed, 7 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL v2 2/2] arm64: dts: TI K3 updates for v5.17
2021-12-23 9:40 ` Vignesh Raghavendra
@ 2021-12-23 9:40 ` Vignesh Raghavendra
-1 siblings, 0 replies; 8+ messages in thread
From: Vignesh Raghavendra @ 2021-12-23 9:40 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, SoC
Cc: Nishanth Menon, linux-arm-kernel, linux-kernel, Tero Kristo, arm
Hi,
Please pull the device tree changes for TI K3 platforms for v5.17.
Please note:
This adds a dtbs_check warning due to missing YAML binding for pinctrl-single compatible.
There also a checkpatch error for complex macro usage in dt-bindings
header defining pinmux marco which is harmless.
v2:
Moved aliases from k3-j721s2.dtsi file and trimmed the list
as per Arnd's suggestion
v1:
https://lore.kernel.org/linux-arm-kernel/20211217172806.10023-2-vigneshr@ti.com/
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v5.17-v2
for you to fetch changes up to e66d1865c059c2cfc17070db0dd820ff5d44ef85:
arm64: dts: ti: Add support J721S2 Common Processor Board (2021-12-22 12:30:58 +0530)
----------------------------------------------------------------
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms:
- J721s2 SoC, SoM and Common Processor Board support
* New features:
- CAN support on AM64 EVM and SK
- TimeSync Router on AM64
* Fixes:
- Correct d-cache-sets info on J7200
- Fix L2 cache-sets value for J721e/J7200/AM64
- Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200
- Disable McASP on IoT2050 board to fix dtbs_check warnings
----------------------------------------------------------------
Aswath Govindraju (8):
arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
arm64: dts: ti: k3-am64-main: Add support for MCAN
arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK
dt-bindings: arm: ti: Add bindings for J721s2 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
arm64: dts: ti: Add initial support for J721S2 SoC
arm64: dts: ti: Add initial support for J721S2 System on Module
arm64: dts: ti: Add support J721S2 Common Processor Board
Christian Gmeiner (1):
arm64: dts: ti: k3-am64-main: add timesync router node
Faiz Abbas (3):
arm64: dts: ti: k3-am65-mcu: Add Support for MCAN
arm64: dts: ti: k3-j721e: Add support for MCAN nodes
arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes
Jayesh Choudhary (1):
arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
Kishon Vijay Abraham I (2):
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
Nishanth Menon (4):
arm64: dts: ti: k3-am642: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
Peng Fan (1):
arm64: dts: ti: k3-j721e: correct cache-sets info
Documentation/devicetree/bindings/arm/ti/k3.yaml | 6 +
arch/arm64/boot/dts/ti/Makefile | 2 +
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 36 +
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 40 +
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 8 +
arch/arm64/boot/dts/ti/k3-am642.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 20 +
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 30 +
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 +
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 155 ++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 198 +-
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 28 +
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 430 +++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 937 ++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 302 +++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 174 ++
arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 167 ++
include/dt-bindings/pinctrl/k3.h | 3 +
21 files changed, 2551 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2.dtsi
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL v2 2/2] arm64: dts: TI K3 updates for v5.17
@ 2021-12-23 9:40 ` Vignesh Raghavendra
0 siblings, 0 replies; 8+ messages in thread
From: Vignesh Raghavendra @ 2021-12-23 9:40 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, SoC
Cc: Nishanth Menon, linux-arm-kernel, linux-kernel, Tero Kristo, arm
Hi,
Please pull the device tree changes for TI K3 platforms for v5.17.
Please note:
This adds a dtbs_check warning due to missing YAML binding for pinctrl-single compatible.
There also a checkpatch error for complex macro usage in dt-bindings
header defining pinmux marco which is harmless.
v2:
Moved aliases from k3-j721s2.dtsi file and trimmed the list
as per Arnd's suggestion
v1:
https://lore.kernel.org/linux-arm-kernel/20211217172806.10023-2-vigneshr@ti.com/
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v5.17-v2
for you to fetch changes up to e66d1865c059c2cfc17070db0dd820ff5d44ef85:
arm64: dts: ti: Add support J721S2 Common Processor Board (2021-12-22 12:30:58 +0530)
----------------------------------------------------------------
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms:
- J721s2 SoC, SoM and Common Processor Board support
* New features:
- CAN support on AM64 EVM and SK
- TimeSync Router on AM64
* Fixes:
- Correct d-cache-sets info on J7200
- Fix L2 cache-sets value for J721e/J7200/AM64
- Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200
- Disable McASP on IoT2050 board to fix dtbs_check warnings
----------------------------------------------------------------
Aswath Govindraju (8):
arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
arm64: dts: ti: k3-am64-main: Add support for MCAN
arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK
dt-bindings: arm: ti: Add bindings for J721s2 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
arm64: dts: ti: Add initial support for J721S2 SoC
arm64: dts: ti: Add initial support for J721S2 System on Module
arm64: dts: ti: Add support J721S2 Common Processor Board
Christian Gmeiner (1):
arm64: dts: ti: k3-am64-main: add timesync router node
Faiz Abbas (3):
arm64: dts: ti: k3-am65-mcu: Add Support for MCAN
arm64: dts: ti: k3-j721e: Add support for MCAN nodes
arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes
Jayesh Choudhary (1):
arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
Kishon Vijay Abraham I (2):
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
Nishanth Menon (4):
arm64: dts: ti: k3-am642: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
Peng Fan (1):
arm64: dts: ti: k3-j721e: correct cache-sets info
Documentation/devicetree/bindings/arm/ti/k3.yaml | 6 +
arch/arm64/boot/dts/ti/Makefile | 2 +
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 36 +
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 40 +
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 8 +
arch/arm64/boot/dts/ti/k3-am642.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 20 +
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 30 +
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 +
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 155 ++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 198 +-
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 28 +
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 430 +++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 937 ++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 302 +++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 174 ++
arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 167 ++
include/dt-bindings/pinctrl/k3.h | 3 +
21 files changed, 2551 insertions(+), 9 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL v2 2/2] arm64: dts: TI K3 updates for v5.17
2021-12-23 9:40 ` Vignesh Raghavendra
@ 2021-12-23 9:50 ` Arnd Bergmann
-1 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2021-12-23 9:50 UTC (permalink / raw)
To: Vignesh Raghavendra
Cc: Arnd Bergmann, Olof Johansson, SoC, Nishanth Menon, Linux ARM,
Linux Kernel Mailing List, Tero Kristo, arm-soc
On Thu, Dec 23, 2021 at 10:40 AM Vignesh Raghavendra <vigneshr@ti.com> wrote:
>
> Hi,
>
> Please pull the device tree changes for TI K3 platforms for v5.17.
>
> Please note:
> This adds a dtbs_check warning due to missing YAML binding for pinctrl-single compatible.
> There also a checkpatch error for complex macro usage in dt-bindings
> header defining pinmux marco which is harmless.
>
> v2:
> Moved aliases from k3-j721s2.dtsi file and trimmed the list
> as per Arnd's suggestion
Sorry, I should have been clearer about what I asked from you. I have already
pulled the first version of this branch, and a lot of stuff on top of
it, so I can't
easily replace the contents with a new version.
Can you send just patches for the difference between the two versions so we
can apply that on top?
Arnd
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL v2 2/2] arm64: dts: TI K3 updates for v5.17
@ 2021-12-23 9:50 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2021-12-23 9:50 UTC (permalink / raw)
To: Vignesh Raghavendra
Cc: Arnd Bergmann, Olof Johansson, SoC, Nishanth Menon, Linux ARM,
Linux Kernel Mailing List, Tero Kristo, arm-soc
On Thu, Dec 23, 2021 at 10:40 AM Vignesh Raghavendra <vigneshr@ti.com> wrote:
>
> Hi,
>
> Please pull the device tree changes for TI K3 platforms for v5.17.
>
> Please note:
> This adds a dtbs_check warning due to missing YAML binding for pinctrl-single compatible.
> There also a checkpatch error for complex macro usage in dt-bindings
> header defining pinmux marco which is harmless.
>
> v2:
> Moved aliases from k3-j721s2.dtsi file and trimmed the list
> as per Arnd's suggestion
Sorry, I should have been clearer about what I asked from you. I have already
pulled the first version of this branch, and a lot of stuff on top of
it, so I can't
easily replace the contents with a new version.
Can you send just patches for the difference between the two versions so we
can apply that on top?
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL v2 2/2] arm64: dts: TI K3 updates for v5.17
2021-12-23 9:50 ` Arnd Bergmann
@ 2021-12-23 10:51 ` Vignesh Raghavendra
-1 siblings, 0 replies; 8+ messages in thread
From: Vignesh Raghavendra @ 2021-12-23 10:51 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Olof Johansson, SoC, Nishanth Menon, Linux ARM,
Linux Kernel Mailing List, Tero Kristo, arm-soc
On 23/12/21 3:20 pm, Arnd Bergmann wrote:
> On Thu, Dec 23, 2021 at 10:40 AM Vignesh Raghavendra <vigneshr@ti.com> wrote:
>>
>> Hi,
>>
>> Please pull the device tree changes for TI K3 platforms for v5.17.
>>
>> Please note:
>> This adds a dtbs_check warning due to missing YAML binding for pinctrl-single compatible.
>> There also a checkpatch error for complex macro usage in dt-bindings
>> header defining pinmux marco which is harmless.
>>
>> v2:
>> Moved aliases from k3-j721s2.dtsi file and trimmed the list
>> as per Arnd's suggestion
>
> Sorry, I should have been clearer about what I asked from you. I have already
> pulled the first version of this branch, and a lot of stuff on top of
> it, so I can't
> easily replace the contents with a new version.
>
Oops, I did not realize that v1 was pulled.
> Can you send just patches for the difference between the two versions so we
> can apply that on top?
>
Sure, will send delta patches in a follow up PR. Thanks!
Regards
Vignesh
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL v2 2/2] arm64: dts: TI K3 updates for v5.17
@ 2021-12-23 10:51 ` Vignesh Raghavendra
0 siblings, 0 replies; 8+ messages in thread
From: Vignesh Raghavendra @ 2021-12-23 10:51 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Olof Johansson, SoC, Nishanth Menon, Linux ARM,
Linux Kernel Mailing List, Tero Kristo, arm-soc
On 23/12/21 3:20 pm, Arnd Bergmann wrote:
> On Thu, Dec 23, 2021 at 10:40 AM Vignesh Raghavendra <vigneshr@ti.com> wrote:
>>
>> Hi,
>>
>> Please pull the device tree changes for TI K3 platforms for v5.17.
>>
>> Please note:
>> This adds a dtbs_check warning due to missing YAML binding for pinctrl-single compatible.
>> There also a checkpatch error for complex macro usage in dt-bindings
>> header defining pinmux marco which is harmless.
>>
>> v2:
>> Moved aliases from k3-j721s2.dtsi file and trimmed the list
>> as per Arnd's suggestion
>
> Sorry, I should have been clearer about what I asked from you. I have already
> pulled the first version of this branch, and a lot of stuff on top of
> it, so I can't
> easily replace the contents with a new version.
>
Oops, I did not realize that v1 was pulled.
> Can you send just patches for the difference between the two versions so we
> can apply that on top?
>
Sure, will send delta patches in a follow up PR. Thanks!
Regards
Vignesh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-12-23 10:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-23 9:40 [GIT PULL v2 1/2] arm64: TI K3 SoC configs changes for v5.17 Vignesh Raghavendra
2021-12-23 9:40 ` Vignesh Raghavendra
2021-12-23 9:40 ` [GIT PULL v2 2/2] arm64: dts: TI K3 updates " Vignesh Raghavendra
2021-12-23 9:40 ` Vignesh Raghavendra
2021-12-23 9:50 ` Arnd Bergmann
2021-12-23 9:50 ` Arnd Bergmann
2021-12-23 10:51 ` Vignesh Raghavendra
2021-12-23 10:51 ` Vignesh Raghavendra
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.