[PATCH AUTOSEL 5.17 01/12] ALSA: usb-audio: Don't get sample rate for MCT Trigger 5 USB-to-HDMI

[PATCH AUTOSEL 5.17 01/12] ALSA: usb-audio: Don't get sample rate for MCT Trigger 5 USB-to-HDMI

[Sasha Levin]

From: Forest Crossman <cyrozap@gmail.com>

[ Upstream commit d7be213849232a2accb219d537edf056d29186b4 ]

This device doesn't support reading the sample rate, so we need to apply
this quirk to avoid a 15-second delay waiting for three timeouts.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Link: https://lore.kernel.org/r/20220504002444.114011-2-cyrozap@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index ab9f3da49941..fbbe59054c3f 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1822,6 +1822,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_IGNORE_CTL_ERROR),
 	DEVICE_FLG(0x06f8, 0xd002, /* Hercules DJ Console (Macintosh Edition) */
 		   QUIRK_FLAG_IGNORE_CTL_ERROR),
+	DEVICE_FLG(0x0711, 0x5800, /* MCT Trigger 5 USB-to-HDMI */
+		   QUIRK_FLAG_GET_SAMPLE_RATE),
 	DEVICE_FLG(0x074d, 0x3553, /* Outlaw RR2150 (Micronas UAC3553B) */
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
 	DEVICE_FLG(0x08bb, 0x2702, /* LineX FM Transmitter */
-- 
2.35.1

[PATCH AUTOSEL 5.17 01/12] ALSA: usb-audio: Don't get sample rate for MCT Trigger 5 USB-to-HDMI

[Sasha Levin]

From: Forest Crossman <cyrozap@gmail.com>

[ Upstream commit d7be213849232a2accb219d537edf056d29186b4 ]

This device doesn't support reading the sample rate, so we need to apply
this quirk to avoid a 15-second delay waiting for three timeouts.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Link: https://lore.kernel.org/r/20220504002444.114011-2-cyrozap@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index ab9f3da49941..fbbe59054c3f 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1822,6 +1822,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_IGNORE_CTL_ERROR),
 	DEVICE_FLG(0x06f8, 0xd002, /* Hercules DJ Console (Macintosh Edition) */
 		   QUIRK_FLAG_IGNORE_CTL_ERROR),
+	DEVICE_FLG(0x0711, 0x5800, /* MCT Trigger 5 USB-to-HDMI */
+		   QUIRK_FLAG_GET_SAMPLE_RATE),
 	DEVICE_FLG(0x074d, 0x3553, /* Outlaw RR2150 (Micronas UAC3553B) */
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
 	DEVICE_FLG(0x08bb, 0x2702, /* LineX FM Transmitter */
-- 
2.35.1

[PATCH AUTOSEL 5.17 02/12] ALSA: hda/realtek: Add quirk for Dell Latitude 7520

[Sasha Levin]

From: Gabriele Mazzotta <gabriele.mzt@gmail.com>

[ Upstream commit 1efcdd9c1f34f5a6590bc9ac5471e562fb011386 ]

The driver is currently using ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for
the Latitude 7520, but this fixup chain has some issues:

 - The internal mic is really loud and the recorded audio is distorted
   at "standard" audio levels.

 - There are pop noises at system startup and when plugging/unplugging
   headphone jacks.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215885
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Link: https://lore.kernel.org/r/20220501124237.4667-1-gabriele.mzt@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 51c54cf0f312..8425eadf6873 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6775,6 +6775,41 @@ static void alc256_fixup_mic_no_presence_and_resume(struct hda_codec *codec,
 	}
 }
 
+static void alc_fixup_dell4_mic_no_presence_quiet(struct hda_codec *codec,
+						  const struct hda_fixup *fix,
+						  int action)
+{
+	struct alc_spec *spec = codec->spec;
+	struct hda_input_mux *imux = &spec->gen.input_mux;
+	int i;
+
+	alc269_fixup_limit_int_mic_boost(codec, fix, action);
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		/**
+		 * Set the vref of pin 0x19 (Headset Mic) and pin 0x1b (Headphone Mic)
+		 * to Hi-Z to avoid pop noises at startup and when plugging and
+		 * unplugging headphones.
+		 */
+		snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ);
+		snd_hda_codec_set_pin_target(codec, 0x1b, PIN_VREFHIZ);
+		break;
+	case HDA_FIXUP_ACT_PROBE:
+		/**
+		 * Make the internal mic (0x12) the default input source to
+		 * prevent pop noises on cold boot.
+		 */
+		for (i = 0; i < imux->num_items; i++) {
+			if (spec->gen.imux_pins[i] == 0x12) {
+				spec->gen.cur_mux[0] = i;
+				break;
+			}
+		}
+		break;
+	}
+}
+
 enum {
 	ALC269_FIXUP_GPIO2,
 	ALC269_FIXUP_SONY_VAIO,
@@ -6816,6 +6851,7 @@ enum {
 	ALC269_FIXUP_DELL2_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL3_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
+	ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_QUIET,
 	ALC269_FIXUP_HEADSET_MODE,
 	ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC,
 	ALC269_FIXUP_ASPIRE_HEADSET_MIC,
@@ -8772,6 +8808,12 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC285_FIXUP_HP_MUTE_LED,
 	},
+	[ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_QUIET] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_dell4_mic_no_presence_quiet,
+		.chained = true,
+		.chain_id = ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8862,6 +8904,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x09bf, "Dell Precision", ALC233_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0a2e, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1028, 0x0a30, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1028, 0x0a38, "Dell Latitude 7520", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_QUIET),
 	SND_PCI_QUIRK(0x1028, 0x0a58, "Dell", ALC255_FIXUP_DELL_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1028, 0x0a61, "Dell XPS 15 9510", ALC289_FIXUP_DUAL_SPK),
 	SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK),
-- 
2.35.1

[PATCH AUTOSEL 5.17 02/12] ALSA: hda/realtek: Add quirk for Dell Latitude 7520

[Sasha Levin]

From: Gabriele Mazzotta <gabriele.mzt@gmail.com>

[ Upstream commit 1efcdd9c1f34f5a6590bc9ac5471e562fb011386 ]

The driver is currently using ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for
the Latitude 7520, but this fixup chain has some issues:

 - The internal mic is really loud and the recorded audio is distorted
   at "standard" audio levels.

 - There are pop noises at system startup and when plugging/unplugging
   headphone jacks.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215885
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Link: https://lore.kernel.org/r/20220501124237.4667-1-gabriele.mzt@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 51c54cf0f312..8425eadf6873 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6775,6 +6775,41 @@ static void alc256_fixup_mic_no_presence_and_resume(struct hda_codec *codec,
 	}
 }
 
+static void alc_fixup_dell4_mic_no_presence_quiet(struct hda_codec *codec,
+						  const struct hda_fixup *fix,
+						  int action)
+{
+	struct alc_spec *spec = codec->spec;
+	struct hda_input_mux *imux = &spec->gen.input_mux;
+	int i;
+
+	alc269_fixup_limit_int_mic_boost(codec, fix, action);
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		/**
+		 * Set the vref of pin 0x19 (Headset Mic) and pin 0x1b (Headphone Mic)
+		 * to Hi-Z to avoid pop noises at startup and when plugging and
+		 * unplugging headphones.
+		 */
+		snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ);
+		snd_hda_codec_set_pin_target(codec, 0x1b, PIN_VREFHIZ);
+		break;
+	case HDA_FIXUP_ACT_PROBE:
+		/**
+		 * Make the internal mic (0x12) the default input source to
+		 * prevent pop noises on cold boot.
+		 */
+		for (i = 0; i < imux->num_items; i++) {
+			if (spec->gen.imux_pins[i] == 0x12) {
+				spec->gen.cur_mux[0] = i;
+				break;
+			}
+		}
+		break;
+	}
+}
+
 enum {
 	ALC269_FIXUP_GPIO2,
 	ALC269_FIXUP_SONY_VAIO,
@@ -6816,6 +6851,7 @@ enum {
 	ALC269_FIXUP_DELL2_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL3_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
+	ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_QUIET,
 	ALC269_FIXUP_HEADSET_MODE,
 	ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC,
 	ALC269_FIXUP_ASPIRE_HEADSET_MIC,
@@ -8772,6 +8808,12 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC285_FIXUP_HP_MUTE_LED,
 	},
+	[ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_QUIET] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_dell4_mic_no_presence_quiet,
+		.chained = true,
+		.chain_id = ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8862,6 +8904,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x09bf, "Dell Precision", ALC233_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1028, 0x0a2e, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1028, 0x0a30, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1028, 0x0a38, "Dell Latitude 7520", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE_QUIET),
 	SND_PCI_QUIRK(0x1028, 0x0a58, "Dell", ALC255_FIXUP_DELL_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1028, 0x0a61, "Dell XPS 15 9510", ALC289_FIXUP_DUAL_SPK),
 	SND_PCI_QUIRK(0x1028, 0x0a62, "Dell Precision 5560", ALC289_FIXUP_DUAL_SPK),
-- 
2.35.1

[PATCH AUTOSEL 5.17 03/12] ALSA: hda/realtek: Add quirk for the Framework Laptop

[Sasha Levin]

From: "Dustin L. Howett" <dustin@howett.net>

[ Upstream commit 309d7363ca3d9fcdb92ff2d958be14d7e8707f68 ]

Some board revisions of the Framework Laptop have an ALC295 with a
disconnected or faulty headset mic presence detect.

The "dell-headset-multi" fixup addresses this issue, but also enables an
inoperative "Headphone Mic" input device whenever a headset is
connected.

Adding a new quirk chain specific to the Framework Laptop resolves this
issue. The one introduced here is based on the System76 "no headphone
mic" quirk chain.

The VID:PID f111:0001 have been allocated to Framework Computer for this
board revision.

Revision history:
- v2: Moved to a custom quirk chain to suppress the "Headphone Mic"
  pincfg.

Signed-off-by: Dustin L. Howett <dustin@howett.net>
Link: https://lore.kernel.org/r/20220511010759.3554-1-dustin@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8425eadf6873..18af98d18b6e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7038,6 +7038,7 @@ enum {
 	ALC287_FIXUP_LEGION_16ACHG6,
 	ALC287_FIXUP_CS35L41_I2C_2,
 	ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED,
+	ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -8814,6 +8815,15 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
 	},
+	[ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x02a1112c }, /* use as headset mic, without its own jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -9286,6 +9296,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC),
 	SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED),
 	SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10),
+	SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 
 #if 0
 	/* Below is a quirk table taken from the old code.
-- 
2.35.1

[PATCH AUTOSEL 5.17 03/12] ALSA: hda/realtek: Add quirk for the Framework Laptop

[Sasha Levin]

From: "Dustin L. Howett" <dustin@howett.net>

[ Upstream commit 309d7363ca3d9fcdb92ff2d958be14d7e8707f68 ]

Some board revisions of the Framework Laptop have an ALC295 with a
disconnected or faulty headset mic presence detect.

The "dell-headset-multi" fixup addresses this issue, but also enables an
inoperative "Headphone Mic" input device whenever a headset is
connected.

Adding a new quirk chain specific to the Framework Laptop resolves this
issue. The one introduced here is based on the System76 "no headphone
mic" quirk chain.

The VID:PID f111:0001 have been allocated to Framework Computer for this
board revision.

Revision history:
- v2: Moved to a custom quirk chain to suppress the "Headphone Mic"
  pincfg.

Signed-off-by: Dustin L. Howett <dustin@howett.net>
Link: https://lore.kernel.org/r/20220511010759.3554-1-dustin@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8425eadf6873..18af98d18b6e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7038,6 +7038,7 @@ enum {
 	ALC287_FIXUP_LEGION_16ACHG6,
 	ALC287_FIXUP_CS35L41_I2C_2,
 	ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED,
+	ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -8814,6 +8815,15 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
 	},
+	[ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x02a1112c }, /* use as headset mic, without its own jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -9286,6 +9296,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC),
 	SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED),
 	SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10),
+	SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE),
 
 #if 0
 	/* Below is a quirk table taken from the old code.
-- 
2.35.1

[PATCH AUTOSEL 5.17 04/12] pinctrl: sunxi: fix f1c100s uart2 function

[Sasha Levin]

From: IotaHydrae <writeforever@foxmail.com>

[ Upstream commit fa8785e5931367e2b43f2c507f26bcf3e281c0ca ]

Change suniv f1c100s pinctrl,PD14 multiplexing function lvds1 to uart2

When the pin PD13 and PD14 is setting up to uart2 function in dts,
there's an error occurred:
1c20800.pinctrl: unsupported function uart2 on pin PD14

Because 'uart2' is not any one multiplexing option of PD14,
and pinctrl don't know how to configure it.

So change the pin PD14 lvds1 function to uart2.

Signed-off-by: IotaHydrae <writeforever@foxmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/tencent_70C1308DDA794C81CAEF389049055BACEC09@qq.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
index 2801ca706273..68a5b627fb9b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
+++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
@@ -204,7 +204,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "lcd"),		/* D20 */
-		  SUNXI_FUNCTION(0x3, "lvds1"),		/* RX */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
 		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
-- 
2.35.1

[PATCH AUTOSEL 5.17 04/12] pinctrl: sunxi: fix f1c100s uart2 function

[Sasha Levin]

From: IotaHydrae <writeforever@foxmail.com>

[ Upstream commit fa8785e5931367e2b43f2c507f26bcf3e281c0ca ]

Change suniv f1c100s pinctrl,PD14 multiplexing function lvds1 to uart2

When the pin PD13 and PD14 is setting up to uart2 function in dts,
there's an error occurred:
1c20800.pinctrl: unsupported function uart2 on pin PD14

Because 'uart2' is not any one multiplexing option of PD14,
and pinctrl don't know how to configure it.

So change the pin PD14 lvds1 function to uart2.

Signed-off-by: IotaHydrae <writeforever@foxmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/tencent_70C1308DDA794C81CAEF389049055BACEC09@qq.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
index 2801ca706273..68a5b627fb9b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
+++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
@@ -204,7 +204,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "lcd"),		/* D20 */
-		  SUNXI_FUNCTION(0x3, "lvds1"),		/* RX */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
 		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)),
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.17 05/12] KVM: arm64: Don't hypercall before EL2 init

[Sasha Levin]

From: Quentin Perret <qperret@google.com>

[ Upstream commit 2e40316753ee552fb598e8da8ca0d20a04e67453 ]

Will reported the following splat when running with Protected KVM
enabled:

[    2.427181] ------------[ cut here ]------------
[    2.427668] WARNING: CPU: 3 PID: 1 at arch/arm64/kvm/mmu.c:489 __create_hyp_private_mapping+0x118/0x1ac
[    2.428424] Modules linked in:
[    2.429040] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc2-00084-g8635adc4efc7 #1
[    2.429589] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[    2.430286] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.430734] pc : __create_hyp_private_mapping+0x118/0x1ac
[    2.431091] lr : create_hyp_exec_mappings+0x40/0x80
[    2.431377] sp : ffff80000803baf0
[    2.431597] x29: ffff80000803bb00 x28: 0000000000000000 x27: 0000000000000000
[    2.432156] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[    2.432561] x23: ffffcd96c343b000 x22: 0000000000000000 x21: ffff80000803bb40
[    2.433004] x20: 0000000000000004 x19: 0000000000001800 x18: 0000000000000000
[    2.433343] x17: 0003e68cf7efdd70 x16: 0000000000000004 x15: fffffc81f602a2c8
[    2.434053] x14: ffffdf8380000000 x13: ffffcd9573200000 x12: ffffcd96c343b000
[    2.434401] x11: 0000000000000004 x10: ffffcd96c1738000 x9 : 0000000000000004
[    2.434812] x8 : ffff80000803bb40 x7 : 7f7f7f7f7f7f7f7f x6 : 544f422effff306b
[    2.435136] x5 : 000000008020001e x4 : ffff207d80a88c00 x3 : 0000000000000005
[    2.435480] x2 : 0000000000001800 x1 : 000000014f4ab800 x0 : 000000000badca11
[    2.436149] Call trace:
[    2.436600]  __create_hyp_private_mapping+0x118/0x1ac
[    2.437576]  create_hyp_exec_mappings+0x40/0x80
[    2.438180]  kvm_init_vector_slots+0x180/0x194
[    2.458941]  kvm_arch_init+0x80/0x274
[    2.459220]  kvm_init+0x48/0x354
[    2.459416]  arm_init+0x20/0x2c
[    2.459601]  do_one_initcall+0xbc/0x238
[    2.459809]  do_initcall_level+0x94/0xb4
[    2.460043]  do_initcalls+0x54/0x94
[    2.460228]  do_basic_setup+0x1c/0x28
[    2.460407]  kernel_init_freeable+0x110/0x178
[    2.460610]  kernel_init+0x20/0x1a0
[    2.460817]  ret_from_fork+0x10/0x20
[    2.461274] ---[ end trace 0000000000000000 ]---

Indeed, the Protected KVM mode promotes __create_hyp_private_mapping()
to a hypercall as EL1 no longer has access to the hypervisor's stage-1
page-table. However, the call from kvm_init_vector_slots() happens after
pKVM has been initialized on the primary CPU, but before it has been
initialized on secondaries. As such, if the KVM initcall procedure is
migrated from one CPU to another in this window, the hypercall may end up
running on a CPU for which EL2 has not been initialized.

Fortunately, the pKVM hypervisor doesn't rely on the host to re-map the
vectors in the private range, so the hypercall in question is in fact
superfluous. Skip it when pKVM is enabled.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
[maz: simplified the checks slightly]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513092607.35233-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kvm/arm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 25d8aff273a1..4dd5f3b08aaa 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -1496,7 +1496,8 @@ static int kvm_init_vector_slots(void)
 	base = kern_hyp_va(kvm_ksym_ref(__bp_harden_hyp_vecs));
 	kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_DIRECT);
 
-	if (kvm_system_needs_idmapped_vectors() && !has_vhe()) {
+	if (kvm_system_needs_idmapped_vectors() &&
+	    !is_protected_kvm_enabled()) {
 		err = create_hyp_exec_mappings(__pa_symbol(__bp_harden_hyp_vecs),
 					       __BP_HARDEN_HYP_VECS_SZ, &base);
 		if (err)
-- 
2.35.1

[PATCH AUTOSEL 5.17 05/12] KVM: arm64: Don't hypercall before EL2 init

[Sasha Levin]

From: Quentin Perret <qperret@google.com>

[ Upstream commit 2e40316753ee552fb598e8da8ca0d20a04e67453 ]

Will reported the following splat when running with Protected KVM
enabled:

[    2.427181] ------------[ cut here ]------------
[    2.427668] WARNING: CPU: 3 PID: 1 at arch/arm64/kvm/mmu.c:489 __create_hyp_private_mapping+0x118/0x1ac
[    2.428424] Modules linked in:
[    2.429040] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc2-00084-g8635adc4efc7 #1
[    2.429589] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[    2.430286] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.430734] pc : __create_hyp_private_mapping+0x118/0x1ac
[    2.431091] lr : create_hyp_exec_mappings+0x40/0x80
[    2.431377] sp : ffff80000803baf0
[    2.431597] x29: ffff80000803bb00 x28: 0000000000000000 x27: 0000000000000000
[    2.432156] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[    2.432561] x23: ffffcd96c343b000 x22: 0000000000000000 x21: ffff80000803bb40
[    2.433004] x20: 0000000000000004 x19: 0000000000001800 x18: 0000000000000000
[    2.433343] x17: 0003e68cf7efdd70 x16: 0000000000000004 x15: fffffc81f602a2c8
[    2.434053] x14: ffffdf8380000000 x13: ffffcd9573200000 x12: ffffcd96c343b000
[    2.434401] x11: 0000000000000004 x10: ffffcd96c1738000 x9 : 0000000000000004
[    2.434812] x8 : ffff80000803bb40 x7 : 7f7f7f7f7f7f7f7f x6 : 544f422effff306b
[    2.435136] x5 : 000000008020001e x4 : ffff207d80a88c00 x3 : 0000000000000005
[    2.435480] x2 : 0000000000001800 x1 : 000000014f4ab800 x0 : 000000000badca11
[    2.436149] Call trace:
[    2.436600]  __create_hyp_private_mapping+0x118/0x1ac
[    2.437576]  create_hyp_exec_mappings+0x40/0x80
[    2.438180]  kvm_init_vector_slots+0x180/0x194
[    2.458941]  kvm_arch_init+0x80/0x274
[    2.459220]  kvm_init+0x48/0x354
[    2.459416]  arm_init+0x20/0x2c
[    2.459601]  do_one_initcall+0xbc/0x238
[    2.459809]  do_initcall_level+0x94/0xb4
[    2.460043]  do_initcalls+0x54/0x94
[    2.460228]  do_basic_setup+0x1c/0x28
[    2.460407]  kernel_init_freeable+0x110/0x178
[    2.460610]  kernel_init+0x20/0x1a0
[    2.460817]  ret_from_fork+0x10/0x20
[    2.461274] ---[ end trace 0000000000000000 ]---

Indeed, the Protected KVM mode promotes __create_hyp_private_mapping()
to a hypercall as EL1 no longer has access to the hypervisor's stage-1
page-table. However, the call from kvm_init_vector_slots() happens after
pKVM has been initialized on the primary CPU, but before it has been
initialized on secondaries. As such, if the KVM initcall procedure is
migrated from one CPU to another in this window, the hypercall may end up
running on a CPU for which EL2 has not been initialized.

Fortunately, the pKVM hypervisor doesn't rely on the host to re-map the
vectors in the private range, so the hypercall in question is in fact
superfluous. Skip it when pKVM is enabled.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
[maz: simplified the checks slightly]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513092607.35233-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kvm/arm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 25d8aff273a1..4dd5f3b08aaa 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -1496,7 +1496,8 @@ static int kvm_init_vector_slots(void)
 	base = kern_hyp_va(kvm_ksym_ref(__bp_harden_hyp_vecs));
 	kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_DIRECT);
 
-	if (kvm_system_needs_idmapped_vectors() && !has_vhe()) {
+	if (kvm_system_needs_idmapped_vectors() &&
+	    !is_protected_kvm_enabled()) {
 		err = create_hyp_exec_mappings(__pa_symbol(__bp_harden_hyp_vecs),
 					       __BP_HARDEN_HYP_VECS_SZ, &base);
 		if (err)
-- 
2.35.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

[PATCH AUTOSEL 5.17 05/12] KVM: arm64: Don't hypercall before EL2 init

[Sasha Levin]

From: Quentin Perret <qperret@google.com>

[ Upstream commit 2e40316753ee552fb598e8da8ca0d20a04e67453 ]

Will reported the following splat when running with Protected KVM
enabled:

[    2.427181] ------------[ cut here ]------------
[    2.427668] WARNING: CPU: 3 PID: 1 at arch/arm64/kvm/mmu.c:489 __create_hyp_private_mapping+0x118/0x1ac
[    2.428424] Modules linked in:
[    2.429040] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc2-00084-g8635adc4efc7 #1
[    2.429589] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[    2.430286] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.430734] pc : __create_hyp_private_mapping+0x118/0x1ac
[    2.431091] lr : create_hyp_exec_mappings+0x40/0x80
[    2.431377] sp : ffff80000803baf0
[    2.431597] x29: ffff80000803bb00 x28: 0000000000000000 x27: 0000000000000000
[    2.432156] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[    2.432561] x23: ffffcd96c343b000 x22: 0000000000000000 x21: ffff80000803bb40
[    2.433004] x20: 0000000000000004 x19: 0000000000001800 x18: 0000000000000000
[    2.433343] x17: 0003e68cf7efdd70 x16: 0000000000000004 x15: fffffc81f602a2c8
[    2.434053] x14: ffffdf8380000000 x13: ffffcd9573200000 x12: ffffcd96c343b000
[    2.434401] x11: 0000000000000004 x10: ffffcd96c1738000 x9 : 0000000000000004
[    2.434812] x8 : ffff80000803bb40 x7 : 7f7f7f7f7f7f7f7f x6 : 544f422effff306b
[    2.435136] x5 : 000000008020001e x4 : ffff207d80a88c00 x3 : 0000000000000005
[    2.435480] x2 : 0000000000001800 x1 : 000000014f4ab800 x0 : 000000000badca11
[    2.436149] Call trace:
[    2.436600]  __create_hyp_private_mapping+0x118/0x1ac
[    2.437576]  create_hyp_exec_mappings+0x40/0x80
[    2.438180]  kvm_init_vector_slots+0x180/0x194
[    2.458941]  kvm_arch_init+0x80/0x274
[    2.459220]  kvm_init+0x48/0x354
[    2.459416]  arm_init+0x20/0x2c
[    2.459601]  do_one_initcall+0xbc/0x238
[    2.459809]  do_initcall_level+0x94/0xb4
[    2.460043]  do_initcalls+0x54/0x94
[    2.460228]  do_basic_setup+0x1c/0x28
[    2.460407]  kernel_init_freeable+0x110/0x178
[    2.460610]  kernel_init+0x20/0x1a0
[    2.460817]  ret_from_fork+0x10/0x20
[    2.461274] ---[ end trace 0000000000000000 ]---

Indeed, the Protected KVM mode promotes __create_hyp_private_mapping()
to a hypercall as EL1 no longer has access to the hypervisor's stage-1
page-table. However, the call from kvm_init_vector_slots() happens after
pKVM has been initialized on the primary CPU, but before it has been
initialized on secondaries. As such, if the KVM initcall procedure is
migrated from one CPU to another in this window, the hypercall may end up
running on a CPU for which EL2 has not been initialized.

Fortunately, the pKVM hypervisor doesn't rely on the host to re-map the
vectors in the private range, so the hypercall in question is in fact
superfluous. Skip it when pKVM is enabled.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
[maz: simplified the checks slightly]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513092607.35233-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kvm/arm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 25d8aff273a1..4dd5f3b08aaa 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -1496,7 +1496,8 @@ static int kvm_init_vector_slots(void)
 	base = kern_hyp_va(kvm_ksym_ref(__bp_harden_hyp_vecs));
 	kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_DIRECT);
 
-	if (kvm_system_needs_idmapped_vectors() && !has_vhe()) {
+	if (kvm_system_needs_idmapped_vectors() &&
+	    !is_protected_kvm_enabled()) {
 		err = create_hyp_exec_mappings(__pa_symbol(__bp_harden_hyp_vecs),
 					       __BP_HARDEN_HYP_VECS_SZ, &base);
 		if (err)
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.17 06/12] parisc: Disable debug code regarding cache flushes in handle_nadtlb_fault()

[Sasha Levin]

From: John David Anglin <dave.anglin@bell.net>

[ Upstream commit 67c35a3b646cc68598ff0bb28de5f8bd7b2e81b3 ]

Change the "BUG" to "WARNING" and disable the message because it triggers
occasionally in spite of the check in flush_cache_page_if_present.

The pte value extracted for the "from" page in copy_user_highpage is racy and
occasionally the pte is cleared before the flush is complete.  I assume that
the page is simultaneously flushed by flush_cache_mm before the pte is cleared
as nullifying the fdc doesn't seem to cause problems.

I investigated various locking scenarios but I wasn't able to find a way to
sequence the flushes.  This code is called for every COW break and locks impact
performance.

This patch is related to the bigger cache flush patch because we need the pte
on PA8800/PA8900 to flush using the vma context.
I have also seen this from copy_to_user_page and copy_from_user_page.

The messages appear infrequently when enabled.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/mm/fault.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index f114e102aaf2..84bc437be5cd 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -22,6 +22,8 @@
 
 #include <asm/traps.h>
 
+#define DEBUG_NATLB 0
+
 /* Various important other fields */
 #define bit22set(x)		(x & 0x00000200)
 #define bits23_25set(x)		(x & 0x000001c0)
@@ -450,8 +452,8 @@ handle_nadtlb_fault(struct pt_regs *regs)
 		fallthrough;
 	case 0x380:
 		/* PDC and FIC instructions */
-		if (printk_ratelimit()) {
-			pr_warn("BUG: nullifying cache flush/purge instruction\n");
+		if (DEBUG_NATLB && printk_ratelimit()) {
+			pr_warn("WARNING: nullifying cache flush/purge instruction\n");
 			show_regs(regs);
 		}
 		if (insn & 0x20) {
-- 
2.35.1

[PATCH AUTOSEL 5.17 07/12] percpu_ref_init(): clean ->percpu_count_ref on failure

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit a91714312eb16f9ecd1f7f8b3efe1380075f28d4 ]

That way percpu_ref_exit() is safe after failing percpu_ref_init().
At least one user (cgroup_create()) had a double-free that way;
there might be other similar bugs.  Easier to fix in percpu_ref_init(),
rather than playing whack-a-mole in sloppy users...

Usual symptoms look like a messed refcounting in one of subsystems
that use percpu allocations (might be percpu-refcount, might be
something else).  Having refcounts for two different objects share
memory is Not Nice(tm)...

Reported-by: syzbot+5b1e53987f858500ec00@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/percpu-refcount.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/lib/percpu-refcount.c b/lib/percpu-refcount.c
index af9302141bcf..e5c5315da274 100644
--- a/lib/percpu-refcount.c
+++ b/lib/percpu-refcount.c
@@ -76,6 +76,7 @@ int percpu_ref_init(struct percpu_ref *ref, percpu_ref_func_t *release,
 	data = kzalloc(sizeof(*ref->data), gfp);
 	if (!data) {
 		free_percpu((void __percpu *)ref->percpu_count_ptr);
+		ref->percpu_count_ptr = 0;
 		return -ENOMEM;
 	}
 
-- 
2.35.1

[PATCH AUTOSEL 5.17 08/12] net: af_key: check encryption module availability consistency

[Sasha Levin]

From: Thomas Bartschies <thomas.bartschies@cvk.de>

[ Upstream commit 015c44d7bff3f44d569716117becd570c179ca32 ]

Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
produces invalid pfkey acquire messages, when these encryption modules are disabled. This
happens because the availability of the algos wasn't checked in all necessary functions.
This patch adds these checks.

Signed-off-by: Thomas Bartschies <thomas.bartschies@cvk.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index fd51db3be91c..fbb2c16693ad 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2898,7 +2898,7 @@ static int count_ah_combs(const struct xfrm_tmpl *t)
 			break;
 		if (!aalg->pfkey_supported)
 			continue;
-		if (aalg_tmpl_set(t, aalg))
+		if (aalg_tmpl_set(t, aalg) && aalg->available)
 			sz += sizeof(struct sadb_comb);
 	}
 	return sz + sizeof(struct sadb_prop);
@@ -2916,7 +2916,7 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
 		if (!ealg->pfkey_supported)
 			continue;
 
-		if (!(ealg_tmpl_set(t, ealg)))
+		if (!(ealg_tmpl_set(t, ealg) && ealg->available))
 			continue;
 
 		for (k = 1; ; k++) {
@@ -2927,7 +2927,7 @@ static int count_esp_combs(const struct xfrm_tmpl *t)
 			if (!aalg->pfkey_supported)
 				continue;
 
-			if (aalg_tmpl_set(t, aalg))
+			if (aalg_tmpl_set(t, aalg) && aalg->available)
 				sz += sizeof(struct sadb_comb);
 		}
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.17 09/12] nfc: pn533: Fix buggy cleanup order

[Sasha Levin]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit b8cedb7093b2d1394cae9b86494cba4b62d3a30a ]

When removing the pn533 device (i2c or USB), there is a logic error. The
original code first cancels the worker (flush_delayed_work) and then
destroys the workqueue (destroy_workqueue), leaving the timer the last
one to be deleted (del_timer). This result in a possible race condition
in a multi-core preempt-able kernel. That is, if the cleanup
(pn53x_common_clean) is concurrently run with the timer handler
(pn533_listen_mode_timer), the timer can queue the poll_work to the
already destroyed workqueue, causing use-after-free.

This patch reorder the cleanup: it uses the del_timer_sync to make sure
the handler is finished before the routine will destroy the workqueue.
Note that the timer cannot be activated by the worker again.

static void pn533_wq_poll(struct work_struct *work)
...
 rc = pn533_send_poll_frame(dev);
 if (rc)
   return;

 if (cur_mod->len == 0 && dev->poll_mod_count > 1)
   mod_timer(&dev->listen_timer, ...);

That is, the mod_timer can be called only when pn533_send_poll_frame()
returns no error, which is impossible because the device is detaching
and the lower driver should return ENODEV code.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/pn533/pn533.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index a491db46e3bd..d9f6367b9993 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -2787,13 +2787,14 @@ void pn53x_common_clean(struct pn533 *priv)
 {
 	struct pn533_cmd *cmd, *n;
 
+	/* delete the timer before cleanup the worker */
+	del_timer_sync(&priv->listen_timer);
+
 	flush_delayed_work(&priv->poll_work);
 	destroy_workqueue(priv->wq);
 
 	skb_queue_purge(&priv->resp_q);
 
-	del_timer(&priv->listen_timer);
-
 	list_for_each_entry_safe(cmd, n, &priv->cmd_queue, queue) {
 		list_del(&cmd->queue);
 		kfree(cmd);
-- 
2.35.1

[PATCH AUTOSEL 5.17 10/12] net: ftgmac100: Disable hardware checksum on AST2600

[Sasha Levin]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit 6fd45e79e8b93b8d22fb8fe22c32fbad7e9190bd ]

The AST2600 when using the i210 NIC over NC-SI has been observed to
produce incorrect checksum results with specific MTU values. This was
first observed when sending data across a long distance set of networks.

On a local network, the following test was performed using a 1MB file of
random data.

On the receiver run this script:

 #!/bin/bash
 while [ 1 ]; do
        # Zero the stats
        nstat -r  > /dev/null
        nc -l 9899 > test-file
        # Check for checksum errors
        TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
        if [ -z "$TcpInCsumErrors" ]; then
                echo No TcpInCsumErrors
        else
                echo TcpInCsumErrors = $TcpInCsumErrors
        fi
 done

On an AST2600 system:

 # nc <IP of  receiver host> 9899 < test-file

The test was repeated with various MTU values:

 # ip link set mtu 1410 dev eth0

The observed results:

 1500 - good
 1434 - bad
 1400 - good
 1410 - bad
 1420 - good

The test was repeated after disabling tx checksumming:

 # ethtool -K eth0 tx-checksumming off

And all MTU values tested resulted in transfers without error.

An issue with the driver cannot be ruled out, however there has been no
bug discovered so far.

David has done the work to take the original bug report of slow data
transfer between long distance connections and triaged it down to this
test case.

The vendor suspects this this is a hardware issue when using NC-SI. The
fixes line refers to the patch that introduced AST2600 support.

Reported-by: David Wilder <wilder@us.ibm.com>
Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index caf48023f8ea..5231818943c6 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1928,6 +1928,11 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	/* AST2400  doesn't have working HW checksum generation */
 	if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
 		netdev->hw_features &= ~NETIF_F_HW_CSUM;
+
+	/* AST2600 tx checksum with NCSI is broken */
+	if (priv->use_ncsi && of_device_is_compatible(np, "aspeed,ast2600-mac"))
+		netdev->hw_features &= ~NETIF_F_HW_CSUM;
+
 	if (np && of_get_property(np, "no-hw-checksum", NULL))
 		netdev->hw_features &= ~(NETIF_F_HW_CSUM | NETIF_F_RXCSUM);
 	netdev->features |= netdev->hw_features;
-- 
2.35.1

[PATCH AUTOSEL 5.17 11/12] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 17a0f3acdc6ec8b89ad40f6e22165a4beee25663 ]

Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:

  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
        [fault reason 05] PTE Write access is not set

To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-ismt.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index f4820fd3dc13..c01430ce103a 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -82,6 +82,7 @@
 
 #define ISMT_DESC_ENTRIES	2	/* number of descriptor entries */
 #define ISMT_MAX_RETRIES	3	/* number of SMBus retries to attempt */
+#define ISMT_LOG_ENTRIES	3	/* number of interrupt cause log entries */
 
 /* Hardware Descriptor Constants - Control Field */
 #define ISMT_DESC_CWRL	0x01	/* Command/Write Length */
@@ -175,6 +176,8 @@ struct ismt_priv {
 	u8 head;				/* ring buffer head pointer */
 	struct completion cmp;			/* interrupt completion */
 	u8 buffer[I2C_SMBUS_BLOCK_MAX + 16];	/* temp R/W data buffer */
+	dma_addr_t log_dma;
+	u32 *log;
 };
 
 static const struct pci_device_id ismt_ids[] = {
@@ -411,6 +414,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 	memset(desc, 0, sizeof(struct ismt_desc));
 	desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
 
+	/* Always clear the log entries */
+	memset(priv->log, 0, ISMT_LOG_ENTRIES * sizeof(u32));
+
 	/* Initialize common control bits */
 	if (likely(pci_dev_msi_enabled(priv->pci_dev)))
 		desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR;
@@ -708,6 +714,8 @@ static void ismt_hw_init(struct ismt_priv *priv)
 	/* initialize the Master Descriptor Base Address (MDBA) */
 	writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA);
 
+	writeq(priv->log_dma, priv->smba + ISMT_GR_SMTICL);
+
 	/* initialize the Master Control Register (MCTRL) */
 	writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL);
 
@@ -795,6 +803,12 @@ static int ismt_dev_init(struct ismt_priv *priv)
 	priv->head = 0;
 	init_completion(&priv->cmp);
 
+	priv->log = dmam_alloc_coherent(&priv->pci_dev->dev,
+					ISMT_LOG_ENTRIES * sizeof(u32),
+					&priv->log_dma, GFP_KERNEL);
+	if (!priv->log)
+		return -ENOMEM;
+
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.17 12/12] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers

[Sasha Levin]

From: Piyush Malgujar <pmalgujar@marvell.com>

[ Upstream commit 03a35bc856ddc09f2cc1f4701adecfbf3b464cb3 ]

Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly
found for TWSI controllers.

Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-thunderx-pcidrv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index 12c90aa0900e..a77cd86fe75e 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -213,6 +213,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
 	i2c->adap.dev.parent = dev;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
+	i2c->adap.dev.fwnode = dev->fwnode;
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
 		 "Cavium ThunderX i2c adapter at %s", dev_name(dev));
 	i2c_set_adapdata(&i2c->adap, i2c);
-- 
2.35.1

Re: [PATCH AUTOSEL 5.17 08/12] net: af_key: check encryption module availability consistency

[Jakub Kicinski]

On Tue, 24 May 2022 11:59:22 -0400 Sasha Levin wrote:
> From: Thomas Bartschies <thomas.bartschies@cvk.de>
> 
> [ Upstream commit 015c44d7bff3f44d569716117becd570c179ca32 ]
> 
> Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
> produces invalid pfkey acquire messages, when these encryption modules are disabled. This
> happens because the availability of the algos wasn't checked in all necessary functions.
> This patch adds these checks.
> 
> Signed-off-by: Thomas Bartschies <thomas.bartschies@cvk.de>
> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

I don't see anyone else complaining yet so let me step up.

Please drop this, it's getting reverted.

Re: [PATCH AUTOSEL 5.17 10/12] net: ftgmac100: Disable hardware checksum on AST2600

[Arnd Bergmann]

On Tue, May 24, 2022 at 5:59 PM Sasha Levin <sashal@kernel.org> wrote:
>
>  # ip link set mtu 1410 dev eth0
>
> The observed results:
>
>  1500 - good
>  1434 - bad
>  1400 - good
>  1410 - bad
>  1420 - good

Does it require multiples of four? Maybe it just skips the last bytes?

        Arnd

Re: [PATCH AUTOSEL 5.17 10/12] net: ftgmac100: Disable hardware checksum on AST2600

[Arnd Bergmann]

On Tue, May 24, 2022 at 8:47 PM Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Tue, May 24, 2022 at 5:59 PM Sasha Levin <sashal@kernel.org> wrote:
> >
> >  # ip link set mtu 1410 dev eth0
> >
> > The observed results:
> >
> >  1500 - good
> >  1434 - bad
> >  1400 - good
> >  1410 - bad
> >  1420 - good
>
> Does it require multiples of four? Maybe it just skips the last bytes?

Nevermind, I missed that this was a backport of a merged patch, rather
than a new one.

       Arnd

Re: [PATCH AUTOSEL 5.17 10/12] net: ftgmac100: Disable hardware checksum on AST2600

[Jakub Kicinski]

On Tue, 24 May 2022 20:47:51 +0200 Arnd Bergmann wrote:
> On Tue, May 24, 2022 at 8:47 PM Arnd Bergmann <arnd@arndb.de> wrote:
> >
> > On Tue, May 24, 2022 at 5:59 PM Sasha Levin <sashal@kernel.org> wrote:  
> > >
> > >  # ip link set mtu 1410 dev eth0
> > >
> > > The observed results:
> > >
> > >  1500 - good
> > >  1434 - bad
> > >  1400 - good
> > >  1410 - bad
> > >  1420 - good  
> >
> > Does it require multiples of four? Maybe it just skips the last bytes?  
> 
> Nevermind, I missed that this was a backport of a merged patch, rather
> than a new one.

Great minds think alike, tho ;)

https://lore.kernel.org/all/YowcZUX3lwAA6c5k@lunn.ch/

Re: [PATCH AUTOSEL 5.17 08/12] net: af_key: check encryption module availability consistency

[Jakub Kicinski]

On Tue, 24 May 2022 11:09:08 -0700 Jakub Kicinski wrote:
> On Tue, 24 May 2022 11:59:22 -0400 Sasha Levin wrote:
> > From: Thomas Bartschies <thomas.bartschies@cvk.de>
> > 
> > [ Upstream commit 015c44d7bff3f44d569716117becd570c179ca32 ]
> > 
> > Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
> > produces invalid pfkey acquire messages, when these encryption modules are disabled. This
> > happens because the availability of the algos wasn't checked in all necessary functions.
> > This patch adds these checks.
> > 
> > Signed-off-by: Thomas Bartschies <thomas.bartschies@cvk.de>
> > Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>  
> 
> I don't see anyone else complaining yet so let me step up.
> 
> Please drop this, it's getting reverted.

I take that back, sorry, it's a different patch.
I meant not to backport 4dc2a5a8f6754492180741facf2a8787f2c415d7.