From: Ohad Ben-Cohen <ohad@wizery.com> To: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-arm <linux-arm-kernel@lists.infradead.org>, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-next@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>, Grant Likely <grant.likely@secretlab.ca>, Brian Swetland <swetland@google.com>, akpm@linux-foundation.org, Greg KH <greg@kroah.com>, Stephen Boyd <sboyd@codeaurora.org>, Mark Brown <broonie@opensource.wolfsonmicro.com>, Rusty Russell <rusty@rustcorp.com.au>, Russell King <linux@arm.linux.org.uk>, Tony Lindgren <tony@atomide.com>, Saravana Kannan <skannan@codeaurora.org> Subject: Adding remoteproc/rpmsg to linux-next Date: Fri, 9 Dec 2011 16:55:27 +0200 [thread overview] Message-ID: <CAK=WgbaU6vpiBGSgogYPjQNmrF-U0wk1rSXMX83DdgQa9hw5Mw@mail.gmail.com> (raw) Hi Stephen, Can you please add the following remoteproc tree to linux-next ? git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc.git for-next This branch includes the basic remoteproc/rpmsg functionality as posted in the mailing lists, with a few minor changes that were requested (namely, changes against virtio-spec.txt were removed and "amp" is no longer used). The motivation for having this in linux-next is twofold: 1. Getting prepared for a 3.3 merger (knock on wood) 2. Starting a linear development scheme, in order to make it easier for people to collaborate (and to reduce the review load of incremental changes) I suspect that once this basic functionality will be merged upstream, the development of remoteproc and rpmsg will become completely orthogonal, and it would then make sense to start queueing patches separately. At that point I'll send you the details for the rpmsg.git tree. Last note: the "ARM: OMAP: add remoteproc devices for OMAP4" patch is omitted from this branch, since it depends on CMA (which isn't merged yet). As soon as CMA will be added (at least to linux-next) that patch will be queued up too. Thanks, Ohad. The following changes since commit 5611cc4572e889b62a7b4c72a413536bf6a9c416: Linux 3.2-rc4 (2011-12-01 14:56:01 -0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc.git for-next Ohad Ben-Cohen (6): remoteproc: add framework for controlling remote processors remoteproc: add debugfs entries remoteproc: create rpmsg virtio device remoteproc/omap: add a remoteproc driver for OMAP4 rpmsg: add virtio-based remote processor messaging bus samples/rpmsg: add an rpmsg driver sample Documentation/ABI/testing/sysfs-bus-rpmsg | 75 ++ Documentation/remoteproc.txt | 324 ++++++ Documentation/rpmsg.txt | 293 ++++++ MAINTAINERS | 7 + arch/arm/plat-omap/include/plat/remoteproc.h | 57 + drivers/Kconfig | 4 + drivers/Makefile | 2 + drivers/remoteproc/Kconfig | 24 + drivers/remoteproc/Makefile | 9 + drivers/remoteproc/omap_remoteproc.c | 249 +++++ drivers/remoteproc/omap_remoteproc.h | 69 ++ drivers/remoteproc/remoteproc_core.c | 1410 ++++++++++++++++++++++++++ drivers/remoteproc/remoteproc_debugfs.c | 179 ++++ drivers/remoteproc/remoteproc_internal.h | 44 + drivers/remoteproc/remoteproc_rpmsg.c | 295 ++++++ drivers/rpmsg/Kconfig | 5 + drivers/rpmsg/Makefile | 1 + drivers/rpmsg/virtio_rpmsg_bus.c | 1026 +++++++++++++++++++ include/linux/mod_devicetable.h | 9 + include/linux/remoteproc.h | 265 +++++ include/linux/rpmsg.h | 326 ++++++ include/linux/virtio_ids.h | 1 + samples/Kconfig | 8 + samples/Makefile | 2 +- samples/rpmsg/Makefile | 1 + samples/rpmsg/rpmsg_client_sample.c | 100 ++ 26 files changed, 4784 insertions(+), 1 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-rpmsg create mode 100644 Documentation/remoteproc.txt create mode 100644 Documentation/rpmsg.txt create mode 100644 arch/arm/plat-omap/include/plat/remoteproc.h create mode 100644 drivers/remoteproc/Kconfig create mode 100644 drivers/remoteproc/Makefile create mode 100644 drivers/remoteproc/omap_remoteproc.c create mode 100644 drivers/remoteproc/omap_remoteproc.h create mode 100644 drivers/remoteproc/remoteproc_core.c create mode 100644 drivers/remoteproc/remoteproc_debugfs.c create mode 100644 drivers/remoteproc/remoteproc_internal.h create mode 100644 drivers/remoteproc/remoteproc_rpmsg.c create mode 100644 drivers/rpmsg/Kconfig create mode 100644 drivers/rpmsg/Makefile create mode 100644 drivers/rpmsg/virtio_rpmsg_bus.c create mode 100644 include/linux/remoteproc.h create mode 100644 include/linux/rpmsg.h create mode 100644 samples/rpmsg/Makefile create mode 100644 samples/rpmsg/rpmsg_client_sample.c
WARNING: multiple messages have this Message-ID (diff)
From: ohad@wizery.com (Ohad Ben-Cohen) To: linux-arm-kernel@lists.infradead.org Subject: Adding remoteproc/rpmsg to linux-next Date: Fri, 9 Dec 2011 16:55:27 +0200 [thread overview] Message-ID: <CAK=WgbaU6vpiBGSgogYPjQNmrF-U0wk1rSXMX83DdgQa9hw5Mw@mail.gmail.com> (raw) Hi Stephen, Can you please add the following remoteproc tree to linux-next ? git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc.git for-next This branch includes the basic remoteproc/rpmsg functionality as posted in the mailing lists, with a few minor changes that were requested (namely, changes against virtio-spec.txt were removed and "amp" is no longer used). The motivation for having this in linux-next is twofold: 1. Getting prepared for a 3.3 merger (knock on wood) 2. Starting a linear development scheme, in order to make it easier for people to collaborate (and to reduce the review load of incremental changes) I suspect that once this basic functionality will be merged upstream, the development of remoteproc and rpmsg will become completely orthogonal, and it would then make sense to start queueing patches separately. At that point I'll send you the details for the rpmsg.git tree. Last note: the "ARM: OMAP: add remoteproc devices for OMAP4" patch is omitted from this branch, since it depends on CMA (which isn't merged yet). As soon as CMA will be added (at least to linux-next) that patch will be queued up too. Thanks, Ohad. The following changes since commit 5611cc4572e889b62a7b4c72a413536bf6a9c416: Linux 3.2-rc4 (2011-12-01 14:56:01 -0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc.git for-next Ohad Ben-Cohen (6): remoteproc: add framework for controlling remote processors remoteproc: add debugfs entries remoteproc: create rpmsg virtio device remoteproc/omap: add a remoteproc driver for OMAP4 rpmsg: add virtio-based remote processor messaging bus samples/rpmsg: add an rpmsg driver sample Documentation/ABI/testing/sysfs-bus-rpmsg | 75 ++ Documentation/remoteproc.txt | 324 ++++++ Documentation/rpmsg.txt | 293 ++++++ MAINTAINERS | 7 + arch/arm/plat-omap/include/plat/remoteproc.h | 57 + drivers/Kconfig | 4 + drivers/Makefile | 2 + drivers/remoteproc/Kconfig | 24 + drivers/remoteproc/Makefile | 9 + drivers/remoteproc/omap_remoteproc.c | 249 +++++ drivers/remoteproc/omap_remoteproc.h | 69 ++ drivers/remoteproc/remoteproc_core.c | 1410 ++++++++++++++++++++++++++ drivers/remoteproc/remoteproc_debugfs.c | 179 ++++ drivers/remoteproc/remoteproc_internal.h | 44 + drivers/remoteproc/remoteproc_rpmsg.c | 295 ++++++ drivers/rpmsg/Kconfig | 5 + drivers/rpmsg/Makefile | 1 + drivers/rpmsg/virtio_rpmsg_bus.c | 1026 +++++++++++++++++++ include/linux/mod_devicetable.h | 9 + include/linux/remoteproc.h | 265 +++++ include/linux/rpmsg.h | 326 ++++++ include/linux/virtio_ids.h | 1 + samples/Kconfig | 8 + samples/Makefile | 2 +- samples/rpmsg/Makefile | 1 + samples/rpmsg/rpmsg_client_sample.c | 100 ++ 26 files changed, 4784 insertions(+), 1 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-rpmsg create mode 100644 Documentation/remoteproc.txt create mode 100644 Documentation/rpmsg.txt create mode 100644 arch/arm/plat-omap/include/plat/remoteproc.h create mode 100644 drivers/remoteproc/Kconfig create mode 100644 drivers/remoteproc/Makefile create mode 100644 drivers/remoteproc/omap_remoteproc.c create mode 100644 drivers/remoteproc/omap_remoteproc.h create mode 100644 drivers/remoteproc/remoteproc_core.c create mode 100644 drivers/remoteproc/remoteproc_debugfs.c create mode 100644 drivers/remoteproc/remoteproc_internal.h create mode 100644 drivers/remoteproc/remoteproc_rpmsg.c create mode 100644 drivers/rpmsg/Kconfig create mode 100644 drivers/rpmsg/Makefile create mode 100644 drivers/rpmsg/virtio_rpmsg_bus.c create mode 100644 include/linux/remoteproc.h create mode 100644 include/linux/rpmsg.h create mode 100644 samples/rpmsg/Makefile create mode 100644 samples/rpmsg/rpmsg_client_sample.c
next reply other threads:[~2011-12-09 14:55 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-12-09 14:55 Ohad Ben-Cohen [this message] 2011-12-09 14:55 ` Adding remoteproc/rpmsg to linux-next Ohad Ben-Cohen 2011-12-11 23:33 ` Stephen Rothwell 2011-12-11 23:33 ` Stephen Rothwell 2011-12-21 17:35 ` Ohad Ben-Cohen 2011-12-21 17:35 ` Ohad Ben-Cohen 2011-12-22 15:22 ` Arnd Bergmann 2011-12-22 15:22 ` Arnd Bergmann 2011-12-23 11:45 ` Ohad Ben-Cohen 2011-12-23 11:45 ` Ohad Ben-Cohen 2012-02-01 7:21 ` Ohad Ben-Cohen 2012-02-01 7:21 ` Ohad Ben-Cohen 2012-02-01 16:57 ` Arnd Bergmann 2012-02-01 16:57 ` Arnd Bergmann 2012-02-01 17:00 ` Ohad Ben-Cohen 2012-02-01 17:00 ` Ohad Ben-Cohen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CAK=WgbaU6vpiBGSgogYPjQNmrF-U0wk1rSXMX83DdgQa9hw5Mw@mail.gmail.com' \ --to=ohad@wizery.com \ --cc=akpm@linux-foundation.org \ --cc=arnd@arndb.de \ --cc=broonie@opensource.wolfsonmicro.com \ --cc=grant.likely@secretlab.ca \ --cc=greg@kroah.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-next@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=rusty@rustcorp.com.au \ --cc=sboyd@codeaurora.org \ --cc=sfr@canb.auug.org.au \ --cc=skannan@codeaurora.org \ --cc=swetland@google.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.