* Is meta-freescale (sumo branch) ready to use?
@ 2018-09-02 22:16 Stefano Cappa
2018-09-05 23:26 ` Otavio Salvador
0 siblings, 1 reply; 9+ messages in thread
From: Stefano Cappa @ 2018-09-02 22:16 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 198 bytes --]
I'm sorry for the stupid question, but I'm using imx6ullevk with rocko and
I want to update sumo, but I don't know if the sumo branch is ready to use,
in particular for imx6ullevk.
Thank you.
[-- Attachment #2: Type: text/html, Size: 251 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-02 22:16 Is meta-freescale (sumo branch) ready to use? Stefano Cappa
@ 2018-09-05 23:26 ` Otavio Salvador
2018-09-06 6:15 ` Stefano Cappa
0 siblings, 1 reply; 9+ messages in thread
From: Otavio Salvador @ 2018-09-05 23:26 UTC (permalink / raw)
To: stefano.cappa.ks89; +Cc: meta-freescale Mailing List
On Sun, Sep 2, 2018 at 7:17 PM Stefano Cappa
<stefano.cappa.ks89@gmail.com> wrote:
> I'm sorry for the stupid question, but I'm using imx6ullevk with rocko and I want to update sumo, but I don't know if the sumo branch is ready to use, in particular for imx6ullevk.
For i.MX6UL it should be good to go I think. Specially if you go with
linux-fslc (mainline) BSP.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-05 23:26 ` Otavio Salvador
@ 2018-09-06 6:15 ` Stefano Cappa
2018-09-06 12:22 ` Otavio Salvador
0 siblings, 1 reply; 9+ messages in thread
From: Stefano Cappa @ 2018-09-06 6:15 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale Mailing List
[-- Attachment #1: Type: text/plain, Size: 967 bytes --]
Otavio, thank you for the answer
For imx6 ULL evk is the same? Because I'm using exactly that version.
Also, can I change Linux and uboot form the default -imx versions to the
mainline -fslc?
If yes, how ? Because by default is using -imx.
Thank you again,
Stefano
Il gio 6 set 2018, 01:27 Otavio Salvador <otavio.salvador@ossystems.com.br>
ha scritto:
> On Sun, Sep 2, 2018 at 7:17 PM Stefano Cappa
> <stefano.cappa.ks89@gmail.com> wrote:
> > I'm sorry for the stupid question, but I'm using imx6ullevk with rocko
> and I want to update sumo, but I don't know if the sumo branch is ready to
> use, in particular for imx6ullevk.
>
> For i.MX6UL it should be good to go I think. Specially if you go with
> linux-fslc (mainline) BSP.
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://code.ossystems.com.br
> Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
>
[-- Attachment #2: Type: text/html, Size: 1579 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-06 6:15 ` Stefano Cappa
@ 2018-09-06 12:22 ` Otavio Salvador
2018-09-07 6:31 ` Stefano Cappa
0 siblings, 1 reply; 9+ messages in thread
From: Otavio Salvador @ 2018-09-06 12:22 UTC (permalink / raw)
To: stefano.cappa.ks89; +Cc: meta-freescale Mailing List
[-- Attachment #1: Type: text/plain, Size: 612 bytes --]
On Thu, Sep 6, 2018 at 3:16 AM Stefano Cappa <stefano.cappa.ks89@gmail.com>
wrote:
> Otavio, thank you for the answer
>
> For imx6 ULL evk is the same? Because I'm using exactly that version.
>
> Also, can I change Linux and uboot form the default -imx versions to the
> mainline -fslc?
> If yes, how ? Because by default is using -imx.
>
You can append the 'use-mainline-bsp' override in the machine.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
[-- Attachment #2: Type: text/html, Size: 1175 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-06 12:22 ` Otavio Salvador
@ 2018-09-07 6:31 ` Stefano Cappa
2018-09-07 20:42 ` Otavio Salvador
0 siblings, 1 reply; 9+ messages in thread
From: Stefano Cappa @ 2018-09-07 6:31 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale Mailing List
[-- Attachment #1: Type: text/plain, Size: 769 bytes --]
Perfect thank you, it worked
Il gio 6 set 2018, 14:22 Otavio Salvador <otavio.salvador@ossystems.com.br>
ha scritto:
>
>
> On Thu, Sep 6, 2018 at 3:16 AM Stefano Cappa <stefano.cappa.ks89@gmail.com>
> wrote:
>
>> Otavio, thank you for the answer
>>
>> For imx6 ULL evk is the same? Because I'm using exactly that version.
>>
>> Also, can I change Linux and uboot form the default -imx versions to the
>> mainline -fslc?
>> If yes, how ? Because by default is using -imx.
>>
>
> You can append the 'use-mainline-bsp' override in the machine.
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://code.ossystems.com.br
> Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
>
[-- Attachment #2: Type: text/html, Size: 1589 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-07 6:31 ` Stefano Cappa
@ 2018-09-07 20:42 ` Otavio Salvador
2018-09-15 16:29 ` Stefano Cappa
0 siblings, 1 reply; 9+ messages in thread
From: Otavio Salvador @ 2018-09-07 20:42 UTC (permalink / raw)
To: Stefano Cappa; +Cc: meta-freescale Mailing List
Glad to hear it!
On Fri, Sep 7, 2018 at 3:31 AM Stefano Cappa
<stefano.cappa.ks89@gmail.com> wrote:
>
> Perfect thank you, it worked
>
> Il gio 6 set 2018, 14:22 Otavio Salvador <otavio.salvador@ossystems.com.br> ha scritto:
>>
>>
>>
>> On Thu, Sep 6, 2018 at 3:16 AM Stefano Cappa <stefano.cappa.ks89@gmail.com> wrote:
>>>
>>> Otavio, thank you for the answer
>>>
>>> For imx6 ULL evk is the same? Because I'm using exactly that version.
>>>
>>> Also, can I change Linux and uboot form the default -imx versions to the mainline -fslc?
>>> If yes, how ? Because by default is using -imx.
>>
>>
>> You can append the 'use-mainline-bsp' override in the machine.
>>
>> --
>> Otavio Salvador O.S. Systems
>> http://www.ossystems.com.br http://code.ossystems.com.br
>> Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-07 20:42 ` Otavio Salvador
@ 2018-09-15 16:29 ` Stefano Cappa
2018-09-16 19:14 ` Otavio Salvador
2018-09-16 21:27 ` Fabio Estevam
0 siblings, 2 replies; 9+ messages in thread
From: Stefano Cappa @ 2018-09-15 16:29 UTC (permalink / raw)
To: meta-freescale Mailing List
[-- Attachment #1: Type: text/plain, Size: 2016 bytes --]
Hi Otavio,
I have another question related to this topic.
I checked inside the github repo of linux-fslc and I saw that in branch
"4.9-2.0.x-imx" all imx6ULL files in "/arch/arm/boot/dts" are vey long.
In my custom meta-layer I created some patches for those files.
When I switch to kernel "4.18.x+fslc" those files are completely
different...very short.
This is an example:
- 4.9:
https://github.com/Freescale/linux-fslc/blob/4.9-2.0.x-imx/arch/arm/boot/dts/imx6ull-14x14-evk.dts
- 4.18:
https://github.com/Freescale/linux-fslc/blob/4.18.x%2Bfslc/arch/arm/boot/dts/imx6ull-14x14-evk.dts
Why? And which is the recommended way to migrate patches from 4.9 to 4.18?
Thank you.
Il giorno ven 7 set 2018 alle ore 22:43 Otavio Salvador <
otavio.salvador@ossystems.com.br> ha scritto:
> Glad to hear it!
> On Fri, Sep 7, 2018 at 3:31 AM Stefano Cappa
> <stefano.cappa.ks89@gmail.com> wrote:
> >
> > Perfect thank you, it worked
> >
> > Il gio 6 set 2018, 14:22 Otavio Salvador <
> otavio.salvador@ossystems.com.br> ha scritto:
> >>
> >>
> >>
> >> On Thu, Sep 6, 2018 at 3:16 AM Stefano Cappa <
> stefano.cappa.ks89@gmail.com> wrote:
> >>>
> >>> Otavio, thank you for the answer
> >>>
> >>> For imx6 ULL evk is the same? Because I'm using exactly that version.
> >>>
> >>> Also, can I change Linux and uboot form the default -imx versions to
> the mainline -fslc?
> >>> If yes, how ? Because by default is using -imx.
> >>
> >>
> >> You can append the 'use-mainline-bsp' override in the machine.
> >>
> >> --
> >> Otavio Salvador O.S. Systems
> >> http://www.ossystems.com.br http://code.ossystems.com.br
> >> Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
> <(347)%20903-9750>
>
>
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://code.ossystems.com.br
> Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
> <(347)%20903-9750>
>
[-- Attachment #2: Type: text/html, Size: 3590 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-15 16:29 ` Stefano Cappa
@ 2018-09-16 19:14 ` Otavio Salvador
2018-09-16 21:27 ` Fabio Estevam
1 sibling, 0 replies; 9+ messages in thread
From: Otavio Salvador @ 2018-09-16 19:14 UTC (permalink / raw)
To: Stefano Cappa; +Cc: meta-freescale Mailing List
On Sat, Sep 15, 2018 at 1:30 PM Stefano Cappa
<stefano.cappa.ks89@gmail.com> wrote:
> I checked inside the github repo of linux-fslc and I saw that in branch "4.9-2.0.x-imx" all imx6ULL files in "/arch/arm/boot/dts" are vey long.
> In my custom meta-layer I created some patches for those files.
>
> When I switch to kernel "4.18.x+fslc" those files are completely different...very short.
>
> This is an example:
> - 4.9: https://github.com/Freescale/linux-fslc/blob/4.9-2.0.x-imx/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> - 4.18: https://github.com/Freescale/linux-fslc/blob/4.18.x%2Bfslc/arch/arm/boot/dts/imx6ull-14x14-evk.dts
>
> Why? And which is the recommended way to migrate patches from 4.9 to 4.18?
It all depends what have been ported to the Linux mainline. It is a
good opportunity to review the missing handles and prepare patches for
it.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Is meta-freescale (sumo branch) ready to use?
2018-09-15 16:29 ` Stefano Cappa
2018-09-16 19:14 ` Otavio Salvador
@ 2018-09-16 21:27 ` Fabio Estevam
1 sibling, 0 replies; 9+ messages in thread
From: Fabio Estevam @ 2018-09-16 21:27 UTC (permalink / raw)
To: Stefano Cappa; +Cc: meta-freescale Mailing List
Hi Stefano,
On Sat, Sep 15, 2018 at 1:29 PM, Stefano Cappa
<stefano.cappa.ks89@gmail.com> wrote:
> Hi Otavio,
> I have another question related to this topic.
>
> I checked inside the github repo of linux-fslc and I saw that in branch
> "4.9-2.0.x-imx" all imx6ULL files in "/arch/arm/boot/dts" are vey long.
> In my custom meta-layer I created some patches for those files.
>
> When I switch to kernel "4.18.x+fslc" those files are completely
> different...very short.
>
> This is an example:
> - 4.9:
> https://github.com/Freescale/linux-fslc/blob/4.9-2.0.x-imx/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> - 4.18:
> https://github.com/Freescale/linux-fslc/blob/4.18.x%2Bfslc/arch/arm/boot/dts/imx6ull-14x14-evk.dts
>
> Why? And which is the recommended way to migrate patches from 4.9 to 4.18?
The main difference on the dts dize is due to the fact that the 4.18
version includes "imx6ul-14x14-evk.dtsi"
Please check:
https://github.com/Freescale/linux-fslc/blob/4.18.x%2Bfslc/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-09-16 21:27 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-02 22:16 Is meta-freescale (sumo branch) ready to use? Stefano Cappa
2018-09-05 23:26 ` Otavio Salvador
2018-09-06 6:15 ` Stefano Cappa
2018-09-06 12:22 ` Otavio Salvador
2018-09-07 6:31 ` Stefano Cappa
2018-09-07 20:42 ` Otavio Salvador
2018-09-15 16:29 ` Stefano Cappa
2018-09-16 19:14 ` Otavio Salvador
2018-09-16 21:27 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.