All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kever Yang <kever.yang@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [patch v3 9/9] rockchip: videp: vop: Add reset support
Date: Thu, 21 Jan 2021 20:50:05 +0800	[thread overview]
Message-ID: <CAKUh=Ryh9ECYgOb=ig0LC05surS-9af2qXvpiOifdUBn1ey_0g@mail.gmail.com> (raw)
In-Reply-To: <20201120132824.063180167@rtp-net.org>

Hi Arnaud,
    Please update the typo at subject line, /videp/video/
    Other change looks good to me, you can add my review tag after update:
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>

Thanks,
- Kever

Arnaud Patard <arnaud.patard@rtp-net.org> ?2020?11?20??? ??9:32???

> In order to ensure that the VOP registers are in correct state,
> add missing support for the VOP reset lines found in the device-tree
>
> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
> Index: u-boot/drivers/video/rockchip/rk_vop.c
> ===================================================================
> --- u-boot.orig/drivers/video/rockchip/rk_vop.c
> +++ u-boot/drivers/video/rockchip/rk_vop.c
> @@ -8,9 +8,11 @@
>  #include <clk.h>
>  #include <display.h>
>  #include <dm.h>
> +#include <dm/device_compat.h>
>  #include <edid.h>
>  #include <log.h>
>  #include <regmap.h>
> +#include <reset.h>
>  #include <syscon.h>
>  #include <video.h>
>  #include <asm/gpio.h>
> @@ -36,14 +38,16 @@ enum vop_pol {
>         DCLK_INVERT    = 3
>  };
>
> -static void rkvop_enable(struct rk3288_vop *regs, ulong fbbase,
> +static void rkvop_enable(struct udevice *dev, struct rk3288_vop *regs,
> ulong fbbase,
>                          int fb_bits_per_pixel,
> -                        const struct display_timing *edid)
> +                        const struct display_timing *edid,
> +                        struct reset_ctl *dclk_rst)
>  {
>         u32 lb_mode;
>         u32 rgb_mode;
>         u32 hactive = edid->hactive.typ;
>         u32 vactive = edid->vactive.typ;
> +       int ret;
>
>         writel(V_ACT_WIDTH(hactive - 1) | V_ACT_HEIGHT(vactive - 1),
>                &regs->win0_act_info);
> @@ -91,6 +95,18 @@ static void rkvop_enable(struct rk3288_v
>
>         writel(fbbase, &regs->win0_yrgb_mst);
>         writel(0x01, &regs->reg_cfg_done); /* enable reg config */
> +
> +       ret = reset_assert(dclk_rst);
> +       if (ret) {
> +               dev_warn(dev, "failed to assert dclk reset (ret=%d)\n",
> ret);
> +               return;
> +       }
> +       udelay(20);
> +
> +       ret = reset_deassert(dclk_rst);
> +       if (ret)
> +               dev_warn(dev, "failed to deassert dclk reset (ret=%d)\n",
> ret);
> +
>  }
>
>  static void rkvop_set_pin_polarity(struct udevice *dev,
> @@ -238,6 +254,7 @@ static int rk_display_init(struct udevic
>         enum video_log2_bpp l2bpp;
>         ofnode remote;
>         const char *compat;
> +       struct reset_ctl dclk_rst;
>
>         debug("%s(%s, %lx, %s)\n", __func__,
>               dev_read_name(dev), fbbase, ofnode_get_name(ep_node));
> @@ -354,7 +371,14 @@ static int rk_display_init(struct udevic
>         }
>
>         rkvop_mode_set(dev, &timing, vop_id);
> -       rkvop_enable(regs, fbbase, 1 << l2bpp, &timing);
> +
> +       ret = reset_get_by_name(dev, "dclk", &dclk_rst);
> +       if (ret) {
> +               dev_err(dev, "failed to get dclk reset (ret=%d)\n", ret);
> +               return ret;
> +       }
> +
> +       rkvop_enable(dev, regs, fbbase, 1 << l2bpp, &timing, &dclk_rst);
>
>         ret = display_enable(disp, 1 << l2bpp, &timing);
>         if (ret)
> @@ -391,11 +415,31 @@ int rk_vop_probe(struct udevice *dev)
>         struct rk_vop_priv *priv = dev_get_priv(dev);
>         int ret = 0;
>         ofnode port, node;
> +       struct reset_ctl ahb_rst;
>
>         /* Before relocation we don't need to do anything */
>         if (!(gd->flags & GD_FLG_RELOC))
>                 return 0;
>
> +       ret = reset_get_by_name(dev, "ahb", &ahb_rst);
> +       if (ret) {
> +               dev_err(dev, "failed to get ahb reset (ret=%d)\n", ret);
> +               return ret;
> +       }
> +
> +       ret = reset_assert(&ahb_rst);
> +       if (ret) {
> +               dev_err(dev, "failed to assert ahb reset (ret=%d)\n", ret);
> +       return ret;
> +       }
> +       udelay(20);
> +
> +       ret = reset_deassert(&ahb_rst);
> +       if (ret) {
> +               dev_err(dev, "failed to deassert ahb reset (ret=%d)\n",
> ret);
> +               return ret;
> +       }
> +
>         plat->base = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size -
> plat->size;
>
>  #if defined(CONFIG_EFI_LOADER)
>
>
>

  reply	other threads:[~2021-01-21 12:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-20 13:24 [patch v3 0/9] rk3399 (Pinebook pro) EDP support Arnaud Patard
2020-11-20 13:24 ` [patch v3 1/9] rockchip: video: vop: Use endpoint compatible string to find VOP mode Arnaud Patard
2020-11-20 13:24 ` [patch v3 2/9] rockchip: video: edp: Add rk3399 support Arnaud Patard
2020-11-20 13:24 ` [patch v3 3/9] ockchip: video: edp: Change interrupt polarity configuration Arnaud Patard
2021-01-21 13:08   ` Kever Yang
2020-11-20 13:24 ` [patch v3 4/9] ockchip: video: vop: Reserve efi fb memory Arnaud Patard
2021-01-21 13:06   ` Kever Yang
2020-11-20 13:24 ` [patch v3 5/9] rockchip: Pinebook Pro: Enable edp Arnaud Patard
2020-11-20 13:24 ` [patch v3 6/9] rockchip: pwm: Fix default polarity Arnaud Patard
2020-11-20 13:24 ` [patch v3 7/9] rockchip: video: vop: Fix format of fbbase in debug string Arnaud Patard
2021-01-21 12:52   ` Kever Yang
2020-11-20 13:24 ` [patch v3 8/9] rockchip: video: edp: Add missing reset support Arnaud Patard
2020-11-20 13:24 ` [patch v3 9/9] rockchip: videp: vop: Add " Arnaud Patard
2021-01-21 12:50   ` Kever Yang [this message]
2021-01-25 15:04 ` [patch v3 0/9] rk3399 (Pinebook pro) EDP support Peter Robinson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAKUh=Ryh9ECYgOb=ig0LC05surS-9af2qXvpiOifdUBn1ey_0g@mail.gmail.com' \
    --to=kever.yang@rock-chips.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.