* [OpenRISC] [PATCH v3 3/3] or1k: gcc: initial support for openrisc
2018-10-27 4:36 [OpenRISC] [PATCH v3 0/3] OpenRISC port Stafford Horne
2018-10-27 4:37 ` [OpenRISC] [PATCH v3 1/3] or1k: libgcc: initial support for openrisc Stafford Horne
2018-10-27 4:37 ` [OpenRISC] [PATCH v3 2/3] or1k: testsuite: " Stafford Horne
@ 2018-10-27 4:37 ` Stafford Horne
2018-10-28 1:56 ` Richard Henderson
` (2 more replies)
2018-10-28 1:29 ` [OpenRISC] [PATCH v3 0/3] OpenRISC port Richard Henderson
3 siblings, 3 replies; 35+ messages in thread
From: Stafford Horne @ 2018-10-27 4:37 UTC (permalink / raw)
To: openrisc
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
Richard Henderson <rth@twiddle.net>
Joel Sherrill <joel@rtems.org>
gcc/ChangeLog:
* common/config/or1k/or1k-common.c: New file.
* config/or1k/*: New.
* config.gcc (or1k*-*-*): New.
* configure.ac (or1k*-*-*): New test for openrisc tls.
* configure: Regenerated.
* doc/install.texi: Document OpenRISC triplets.
* doc/invoke.texi: Document OpenRISC arguments.
* doc/md.texi: Document OpenRISC.
---
gcc/common/config/or1k/or1k-common.c | 41 +
gcc/config.gcc | 45 +
gcc/config/or1k/constraints.md | 55 +
gcc/config/or1k/elf.h | 42 +
gcc/config/or1k/elf.opt | 33 +
gcc/config/or1k/linux.h | 44 +
gcc/config/or1k/or1k-protos.h | 38 +
gcc/config/or1k/or1k.c | 2186 ++++++++++++++++++++++++++
gcc/config/or1k/or1k.h | 392 +++++
gcc/config/or1k/or1k.md | 907 +++++++++++
gcc/config/or1k/or1k.opt | 67 +
gcc/config/or1k/predicates.md | 84 +
gcc/config/or1k/rtems.h | 30 +
gcc/config/or1k/t-or1k | 22 +
gcc/config/or1k/t-rtems | 3 +
gcc/configure | 12 +
gcc/configure.ac | 12 +
gcc/doc/install.texi | 19 +
gcc/doc/invoke.texi | 68 +
gcc/doc/md.texi | 25 +
20 files changed, 4125 insertions(+)
create mode 100644 gcc/common/config/or1k/or1k-common.c
create mode 100644 gcc/config/or1k/constraints.md
create mode 100644 gcc/config/or1k/elf.h
create mode 100644 gcc/config/or1k/elf.opt
create mode 100644 gcc/config/or1k/linux.h
create mode 100644 gcc/config/or1k/or1k-protos.h
create mode 100644 gcc/config/or1k/or1k.c
create mode 100644 gcc/config/or1k/or1k.h
create mode 100644 gcc/config/or1k/or1k.md
create mode 100644 gcc/config/or1k/or1k.opt
create mode 100644 gcc/config/or1k/predicates.md
create mode 100644 gcc/config/or1k/rtems.h
create mode 100644 gcc/config/or1k/t-or1k
create mode 100644 gcc/config/or1k/t-rtems
diff --git a/gcc/common/config/or1k/or1k-common.c b/gcc/common/config/or1k/or1k-common.c
new file mode 100644
index 00000000000..044e843fd19
--- /dev/null
+++ b/gcc/common/config/or1k/or1k-common.c
@@ -0,0 +1,41 @@
+/* Common hooks for OpenRISC
+ Copyright (C) 2018 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "diagnostic-core.h"
+#include "tm.h"
+#include "common/common-target.h"
+#include "common/common-target-def.h"
+#include "opts.h"
+#include "flags.h"
+
+/* Implement TARGET_OPTION_OPTIMIZATION_TABLE. */
+static const struct default_options or1k_option_optimization_table[] =
+ {
+ /* Enable section anchors by default at -O1 or higher. */
+ { OPT_LEVELS_1_PLUS, OPT_fsection_anchors, NULL, 1 },
+ { OPT_LEVELS_NONE, 0, NULL, 0 }
+ };
+
+#undef TARGET_OPTION_OPTIMIZATION_TABLE
+#define TARGET_OPTION_OPTIMIZATION_TABLE or1k_option_optimization_table
+
+struct gcc_targetm_common targetm_common = TARGETM_COMMON_INITIALIZER;
diff --git a/gcc/config.gcc b/gcc/config.gcc
index 71f62a2aba2..0dc2ac4b879 100644
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -468,6 +468,9 @@ nios2-*-*)
nvptx-*-*)
cpu_type=nvptx
;;
+or1k*-*-*)
+ cpu_type=or1k
+ ;;
powerpc*-*-*spe*)
cpu_type=powerpcspe
extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h htmintrin.h htmxlintrin.h"
@@ -2464,6 +2467,48 @@ nvptx-*)
tm_file="${tm_file} nvptx/offload.h"
fi
;;
+or1k*-*-*)
+ tm_file="elfos.h ${tm_file}"
+ tmake_file="${tmake_file} or1k/t-or1k"
+ # Force .init_array support. The configure script cannot always
+ # automatically detect that GAS supports it, yet we require it.
+ gcc_cv_initfini_array=yes
+
+ # Handle --with-multilib-list=...
+ or1k_multilibs="${with_multilib_list}"
+ if test "$or1k_multilibs" = "default"; then
+ or1k_multilibs="mcmov,msoft-mul,msoft-div"
+ fi
+ or1k_multilibs=`echo $or1k_multilibs | sed -e 's/,/ /g'`
+ for or1k_multilib in ${or1k_multilibs}; do
+ case ${or1k_multilib} in
+ mcmov | msext | msfimm | \
+ mhard-div | mhard-mul | \
+ msoft-div | msoft-mul )
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${with_multilib_list} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
+
+ case ${target} in
+ or1k*-*-linux*)
+ tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h"
+ tm_file="${tm_file} or1k/linux.h"
+ ;;
+ or1k*-*-elf*)
+ tm_file="${tm_file} newlib-stdint.h or1k/elf.h"
+ extra_options="${extra_options} or1k/elf.opt"
+ ;;
+ or1k*-*-rtems*)
+ tm_file="${tm_file} newlib-stdint.h or1k/rtems.h rtems.h"
+ tmake_file="${tmake_file} or1k/t-rtems"
+ ;;
+ esac
+ ;;
pdp11-*-*)
tm_file="${tm_file} newlib-stdint.h"
use_gcc_stdint=wrap
diff --git a/gcc/config/or1k/constraints.md b/gcc/config/or1k/constraints.md
new file mode 100644
index 00000000000..aa321bc0f86
--- /dev/null
+++ b/gcc/config/or1k/constraints.md
@@ -0,0 +1,55 @@
+;; Constraint definitions for OpenRISC
+;; Copyright (C) 2018 Free Software Foundation, Inc.
+;; Contributed by Stafford Horne
+
+;; This file is part of GCC.
+
+;; GCC is free software; you can redistribute it and/or modify it
+;; under the terms of the GNU General Public License as published
+;; by the Free Software Foundation; either version 3, or (at your
+;; option) any later version.
+
+;; GCC is distributed in the hope that it will be useful, but WITHOUT
+;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+;; License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+;; -------------------------------------------------------------------------
+;; Constraints
+;; -------------------------------------------------------------------------
+
+; We use:
+; c - sibcall registers
+; I - constant signed 16-bit
+; K - constant unsigned 16-bit
+; M - constant signed 16-bit shifted left 16-bits (l.movhi)
+; O - constant zero
+
+(define_register_constraint "c" "SIBCALL_REGS"
+ "Registers which can hold a sibling call address")
+
+;; Immediates
+(define_constraint "I"
+ "A signed 16-bit immediate in the range -32768 to 32767."
+ (and (match_code "const_int")
+ (match_test "IN_RANGE (ival, -32768, 32767)")))
+
+(define_constraint "K"
+ "An unsigned 16-bit immediate in the range 0 to 0xffff."
+ (and (match_code "const_int")
+ (match_test "IN_RANGE (ival, 0, 65535)")))
+
+(define_constraint "M"
+ "A shifted signed 16-bit constant suitable for l.movhi."
+ (and (match_code "const_int")
+ (match_test "(ival & 0xffff) == 0
+ && (ival >> 31 == -1 || ival >> 31 == 0)")))
+
+(define_constraint "O"
+ "The constant zero"
+ (and (match_code "const_int")
+ (match_test "ival == 0")))
diff --git a/gcc/config/or1k/elf.h b/gcc/config/or1k/elf.h
new file mode 100644
index 00000000000..901f2b94388
--- /dev/null
+++ b/gcc/config/or1k/elf.h
@@ -0,0 +1,42 @@
+/* Target Newlib Definitions for OpenRISC.
+ Copyright (C) 2018 Free Software Foundation, Inc.
+ Contributed by Stafford Horne.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#ifndef GCC_OR1K_ELF_H
+#define GCC_OR1K_ELF_H
+
+#undef LIB_SPEC
+#define LIB_SPEC "--start-group -lc -lor1k " \
+ "%{mboard=*:-lboard-%*; :-lboard-or1ksim} --end-group"
+
+#undef LINK_SPEC
+#define LINK_SPEC "%{h*} \
+ %{static:-Bstatic} \
+ %{shared:-shared} \
+ %{symbolic:-Bsymbolic} \
+ %{!static:%{rdynamic:-export-dynamic}} \
+ --entry=0x100"
+
+#undef STARTFILE_SPEC
+#define STARTFILE_SPEC "crt0.o%s crti.o%s crtbegin.o%s"
+
+#undef ENDFILE_SPEC
+#define ENDFILE_SPEC "crtend.o%s crtn.o%s"
+
+#endif /* GCC_OR1K_ELF_H */
diff --git a/gcc/config/or1k/elf.opt b/gcc/config/or1k/elf.opt
new file mode 100644
index 00000000000..956d395003d
--- /dev/null
+++ b/gcc/config/or1k/elf.opt
@@ -0,0 +1,33 @@
+; OpenRISC command line options for newlib binaries
+
+; Copyright (C) 2010-2018 Free Software Foundation, Inc.
+;
+; This file is part of GCC.
+;
+; GCC is free software; you can redistribute it and/or modify it under
+; the terms of the GNU General Public License as published by the Free
+; Software Foundation; either version 3, or (at your option) any later
+; version.
+;
+; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+; WARRANTY; without even the implied warranty of MERCHANTABILITY or
+; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+; for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with GCC; see the file COPYING3. If not see
+; <http://www.gnu.org/licenses/>.
+
+; See the GCC internals manual (options.texi) for a description of
+; this file's format.
+
+; Please try to keep this file in ASCII collating order.
+
+mboard=
+Target RejectNegative Joined
+Configure board specific runtime.
+
+mnewlib
+Target RejectNegative
+For compatibility, it's always newlib for elf now.
+
diff --git a/gcc/config/or1k/linux.h b/gcc/config/or1k/linux.h
new file mode 100644
index 00000000000..6dfa546f837
--- /dev/null
+++ b/gcc/config/or1k/linux.h
@@ -0,0 +1,44 @@
+/* Linux Definitions for OpenRISC.
+ Copyright (C) 2018 Free Software Foundation, Inc.
+ Contributed by Stafford Horne.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#ifndef GCC_OR1K_LINUX_H
+#define GCC_OR1K_LINUX_H
+
+/* elfos.h should have already been included. Now just override
+ any conflicting definitions and add any extras. */
+
+#define TARGET_OS_CPP_BUILTINS() \
+ GNU_USER_TARGET_OS_CPP_BUILTINS ()
+
+#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux-or1k.so.1"
+
+#undef MUSL_DYNAMIC_LINKER
+#define MUSL_DYNAMIC_LINKER "/lib/ld-musl-or1k.so.1"
+
+#undef LINK_SPEC
+#define LINK_SPEC "%{h*} \
+ %{static:-Bstatic} \
+ %{shared:-shared} \
+ %{symbolic:-Bsymbolic} \
+ %{!static: \
+ %{rdynamic:-export-dynamic} \
+ %{!shared:-dynamic-linker " GNU_USER_DYNAMIC_LINKER "}}"
+
+#endif /* GCC_OR1K_LINUX_H */
diff --git a/gcc/config/or1k/or1k-protos.h b/gcc/config/or1k/or1k-protos.h
new file mode 100644
index 00000000000..e18383ae781
--- /dev/null
+++ b/gcc/config/or1k/or1k-protos.h
@@ -0,0 +1,38 @@
+/* Prototypes for OpenRISC functions used in the md file & elsewhere.
+ Copyright (C) 2018 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+extern HOST_WIDE_INT or1k_initial_elimination_offset (int, int);
+extern void or1k_expand_prologue (void);
+extern void or1k_expand_epilogue (void);
+extern void or1k_expand_eh_return (rtx);
+extern rtx or1k_initial_frame_addr (void);
+extern rtx or1k_dynamic_chain_addr (rtx);
+extern rtx or1k_return_addr (int, rtx);
+extern void or1k_expand_move (machine_mode, rtx, rtx);
+extern void or1k_expand_compare (rtx *);
+extern void or1k_expand_call (rtx, rtx, rtx, bool);
+
+#ifdef RTX_CODE
+void or1k_expand_atomic_compare_and_swap (rtx operands[]);
+void or1k_expand_atomic_compare_and_swap_qihi (rtx operands[]);
+void or1k_expand_atomic_exchange (rtx operands[]);
+void or1k_expand_atomic_exchange_qihi (rtx operands[]);
+void or1k_expand_atomic_op (rtx_code, rtx, rtx, rtx, rtx);
+void or1k_expand_atomic_op_qihi (rtx_code, rtx, rtx, rtx, rtx);
+#endif
diff --git a/gcc/config/or1k/or1k.c b/gcc/config/or1k/or1k.c
new file mode 100644
index 00000000000..5d9ede41759
--- /dev/null
+++ b/gcc/config/or1k/or1k.c
@@ -0,0 +1,2186 @@
+/* Target Code for OpenRISC
+ Copyright (C) 2018 Free Software Foundation, Inc.
+ Contributed by Stafford Horne based on other ports.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#define IN_TARGET_CODE 1
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "backend.h"
+#include "target.h"
+#include "rtl.h"
+#include "tree.h"
+#include "stringpool.h"
+#include "attribs.h"
+#include "df.h"
+#include "regs.h"
+#include "memmodel.h"
+#include "emit-rtl.h"
+#include "diagnostic-core.h"
+#include "output.h"
+#include "stor-layout.h"
+#include "varasm.h"
+#include "calls.h"
+#include "expr.h"
+#include "builtins.h"
+#include "optabs.h"
+#include "explow.h"
+#include "cfgrtl.h"
+#include "alias.h"
+
+/* These 4 are needed to allow using satisfies_constraint_J. */
+#include "insn-config.h"
+#include "recog.h"
+#include "tm_p.h"
+#include "tm-constrs.h"
+
+/* This file should be included last. */
+#include "target-def.h"
+
+/* Per-function machine data. */
+struct GTY(()) machine_function
+{
+ /* Number of bytes saved on the stack for callee saved registers. */
+ HOST_WIDE_INT callee_saved_reg_size;
+
+ /* Number of bytes saved on the stack for local variables. */
+ HOST_WIDE_INT local_vars_size;
+
+ /* Number of bytes saved on the stack for outgoing/sub-fucntion args. */
+ HOST_WIDE_INT args_size;
+
+ /* The sum of sizes: locals vars, called saved regs, stack pointer
+ * and an optional frame pointer.
+ * Used in expand_prologue () and expand_epilogue(). */
+ HOST_WIDE_INT total_size;
+
+ /* Remember where the set_got_placeholder is located. */
+ rtx_insn *set_got_insn;
+};
+
+/* Zero initialization is OK for all current fields. */
+
+static struct machine_function *
+or1k_init_machine_status (void)
+{
+ return ggc_cleared_alloc<machine_function> ();
+}
+
+
+/* Worker for TARGET_OPTION_OVERRIDE.
+ We currently only use this to setup init_machine_status. */
+
+static void
+or1k_option_override (void)
+{
+ /* Set the per-function-data initializer. */
+ init_machine_status = or1k_init_machine_status;
+}
+
+/* Returns true if REGNO must be saved for the current function. */
+
+static bool
+callee_saved_regno_p (int regno)
+{
+ /* Check call-saved registers. */
+ if (!call_used_regs[regno] && df_regs_ever_live_p (regno))
+ return true;
+
+ switch (regno)
+ {
+ case HARD_FRAME_POINTER_REGNUM:
+ return frame_pointer_needed;
+
+ case LR_REGNUM:
+ /* Always save LR if we are saving HFP, producing a walkable
+ stack chain with -fno-omit-frame-pointer. */
+ return (frame_pointer_needed
+ || !crtl->is_leaf
+ || crtl->uses_pic_offset_table
+ || df_regs_ever_live_p (regno));
+
+ case HW_TO_GCC_REGNO (25):
+ case HW_TO_GCC_REGNO (27):
+ case HW_TO_GCC_REGNO (29):
+ case HW_TO_GCC_REGNO (31):
+ /* See EH_RETURN_DATA_REGNO. */
+ return crtl->calls_eh_return;
+
+ default:
+ return false;
+ }
+}
+
+/* Worker for TARGET_COMPUTE_FRAME_LAYOUT.
+ Compute and populate machine specific function attributes which are globally
+ accessible via cfun->machine. These include the sizes needed for
+ stack stored local variables, callee saved registers and space for stack
+ arguments which may be passed to a next function. The values are used for
+ the epilogue, prologue and eliminations.
+
+ OpenRISC stack grows downwards and contains:
+
+ ---- previous frame --------
+ current func arg[n]
+ current func arg[0] <-- r2 [HFP,AP]
+ ---- current stack frame --- ^ ---\
+ return address r9 | |
+ old frame pointer r2 (+) |-- machine->total_size
+ callee saved regs | | > machine->callee_saved_reg_size
+ local variables | | > machine->local_vars_size <-FP
+ next function args <-- r1 [SP]---/ > machine->args_size
+ ---------------------------- |
+ (-)
+ (future) |
+ V
+
+ All of these contents are optional. */
+
+static void
+or1k_compute_frame_layout (void)
+{
+ HOST_WIDE_INT local_vars_size, args_size, save_reg_size;
+
+ local_vars_size = get_frame_size ();
+ local_vars_size = ROUND_UP (local_vars_size, UNITS_PER_WORD);
+
+ args_size = crtl->outgoing_args_size;
+ args_size = ROUND_UP (args_size, UNITS_PER_WORD);
+
+ save_reg_size = 0;
+ for (int regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (callee_saved_regno_p (regno))
+ save_reg_size += UNITS_PER_WORD;
+
+ cfun->machine->local_vars_size = local_vars_size;
+ cfun->machine->args_size = args_size;
+ cfun->machine->callee_saved_reg_size = save_reg_size;
+ cfun->machine->total_size = save_reg_size + local_vars_size + args_size;
+}
+
+/* Emit rtl to save register REGNO contents to stack memory at the given OFFSET
+ from the current stack pointer. */
+
+static void
+or1k_save_reg (int regno, HOST_WIDE_INT offset)
+{
+ rtx reg = gen_rtx_REG (Pmode, regno);
+ rtx mem = gen_frame_mem (SImode, plus_constant (Pmode, stack_pointer_rtx,
+ offset));
+ rtx insn = emit_move_insn (mem, reg);
+ RTX_FRAME_RELATED_P (insn) = 1;
+}
+
+/* Emit rtl to restore register REGNO contents from stack memory at the given
+ OFFSET from the current stack pointer. */
+
+static rtx
+or1k_restore_reg (int regno, HOST_WIDE_INT offset, rtx cfa_restores)
+{
+ rtx reg = gen_rtx_REG (Pmode, regno);
+ rtx mem = gen_frame_mem (SImode, plus_constant (Pmode, stack_pointer_rtx,
+ offset));
+ emit_move_insn (reg, mem);
+ return alloc_reg_note (REG_CFA_RESTORE, reg, cfa_restores);
+}
+
+/* Expand the "prologue" pattern. */
+
+void
+or1k_expand_prologue (void)
+{
+ HOST_WIDE_INT sp_offset = -cfun->machine->total_size;
+ HOST_WIDE_INT reg_offset, this_offset;
+ rtx insn;
+
+ if (flag_stack_usage_info)
+ current_function_static_stack_size = -sp_offset;
+
+ /* Early exit for frameless functions. */
+ if (sp_offset == 0)
+ goto fini;
+
+ /* Adjust the stack pointer. For large stack offsets we will
+ do this in multiple parts, before and after saving registers. */
+ reg_offset = (sp_offset + cfun->machine->local_vars_size
+ + cfun->machine->args_size);
+ this_offset = MAX (sp_offset, -32764);
+ reg_offset -= this_offset;
+ sp_offset -= this_offset;
+
+ insn = emit_insn (gen_frame_addsi3 (stack_pointer_rtx, stack_pointer_rtx,
+ GEN_INT (this_offset)));
+ RTX_FRAME_RELATED_P (insn) = 1;
+
+ /* Save callee-saved registers. */
+ for (int regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (regno != HARD_FRAME_POINTER_REGNUM
+ && regno != LR_REGNUM
+ && callee_saved_regno_p (regno))
+ {
+ or1k_save_reg (regno, reg_offset);
+ reg_offset += UNITS_PER_WORD;
+ }
+
+ /* Save and update frame pointer. */
+ if (callee_saved_regno_p (HARD_FRAME_POINTER_REGNUM))
+ {
+ or1k_save_reg (HARD_FRAME_POINTER_REGNUM, reg_offset);
+ if (frame_pointer_needed)
+ {
+ insn = emit_insn (gen_addsi3 (hard_frame_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (-this_offset)));
+ RTX_FRAME_RELATED_P (insn) = 1;
+ }
+ reg_offset += UNITS_PER_WORD;
+ }
+
+ /* Save the link register. */
+ if (callee_saved_regno_p (LR_REGNUM))
+ {
+ or1k_save_reg (LR_REGNUM, reg_offset);
+ reg_offset += UNITS_PER_WORD;
+ }
+ gcc_assert (reg_offset + this_offset == 0);
+
+ /* Allocate the rest of the stack frame, if any. */
+ if (sp_offset != 0)
+ {
+ if (sp_offset < 2 * -32768)
+ {
+ /* For very large offsets, we need a temporary register. */
+ rtx tmp = gen_rtx_REG (Pmode, PE_TMP_REGNUM);
+ emit_move_insn (tmp, GEN_INT (sp_offset));
+ insn = emit_insn (gen_frame_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx, tmp));
+ if (!frame_pointer_needed)
+ {
+ RTX_FRAME_RELATED_P (insn) = 1;
+ add_reg_note (insn, REG_CFA_ADJUST_CFA,
+ gen_rtx_SET (stack_pointer_rtx,
+ plus_constant (Pmode,
+ stack_pointer_rtx,
+ sp_offset)));
+ }
+ }
+ else
+ {
+ /* Otherwise, emit one or two sequential subtracts. */
+ do
+ {
+ this_offset = MAX (sp_offset, -32768);
+ sp_offset -= this_offset;
+
+ insn = emit_insn (gen_frame_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (this_offset)));
+ if (!frame_pointer_needed)
+ RTX_FRAME_RELATED_P (insn) = 1;
+ }
+ while (sp_offset != 0);
+ }
+ }
+
+ fini:
+ /* Fix up, or remove, the insn that initialized the pic register. */
+ rtx_insn *set_got_insn = cfun->machine->set_got_insn;
+ if (crtl->uses_pic_offset_table)
+ {
+ rtx reg = SET_DEST (PATTERN (set_got_insn));
+ rtx_insn *insn = emit_insn_before (gen_set_got (reg), set_got_insn);
+ RTX_FRAME_RELATED_P (insn) = 1;
+ add_reg_note (insn, REG_CFA_FLUSH_QUEUE, NULL_RTX);
+ }
+ delete_insn (set_got_insn);
+}
+
+/* Expand the "epilogue" pattern. */
+
+void
+or1k_expand_epilogue (void)
+{
+ HOST_WIDE_INT reg_offset, sp_offset;
+ rtx insn, cfa_restores = NULL;
+
+ sp_offset = cfun->machine->total_size;
+ if (sp_offset == 0)
+ return;
+
+ reg_offset = cfun->machine->local_vars_size + cfun->machine->args_size;
+
+ if (sp_offset >= 32768 || cfun->calls_alloca)
+ {
+ /* The saved registers are out of range of the stack pointer.
+ We need to partially deallocate the stack frame now. */
+ if (frame_pointer_needed)
+ {
+ /* Reset the stack pointer to the bottom of the saved regs. */
+ sp_offset -= reg_offset;
+ reg_offset = 0;
+ insn = emit_insn (gen_frame_addsi3 (stack_pointer_rtx,
+ hard_frame_pointer_rtx,
+ GEN_INT (-sp_offset)));
+ RTX_FRAME_RELATED_P (insn) = 1;
+ add_reg_note (insn, REG_CFA_DEF_CFA,
+ plus_constant (Pmode, stack_pointer_rtx, sp_offset));
+ }
+ else if (sp_offset >= 3 * 32768)
+ {
+ /* For very large offsets, we need a temporary register. */
+ rtx tmp = gen_rtx_REG (Pmode, PE_TMP_REGNUM);
+ emit_move_insn (tmp, GEN_INT (reg_offset));
+ insn = emit_insn (gen_frame_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx, tmp));
+ sp_offset -= reg_offset;
+ reg_offset = 0;
+ RTX_FRAME_RELATED_P (insn) = 1;
+ add_reg_note (insn, REG_CFA_DEF_CFA,
+ plus_constant (Pmode, stack_pointer_rtx, sp_offset));
+ }
+ else
+ {
+ /* Otherwise, emit one or two sequential additions. */
+ do
+ {
+ HOST_WIDE_INT this_offset = MIN (reg_offset, 32764);
+ reg_offset -= this_offset;
+ sp_offset -= this_offset;
+
+ insn = emit_insn (gen_frame_addsi3 (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (this_offset)));
+ RTX_FRAME_RELATED_P (insn) = 1;
+ add_reg_note (insn, REG_CFA_DEF_CFA,
+ plus_constant (Pmode, stack_pointer_rtx,
+ sp_offset));
+ }
+ while (sp_offset >= 32768);
+ }
+ }
+
+ /* Restore callee-saved registers. */
+ for (int regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ if (regno != HARD_FRAME_POINTER_REGNUM
+ && regno != LR_REGNUM
+ && callee_saved_regno_p (regno))
+ {
+ cfa_restores = or1k_restore_reg (regno, reg_offset, cfa_restores);
+ reg_offset += UNITS_PER_WORD;
+ }
+
+ /* Restore frame pointer. */
+ if (callee_saved_regno_p (HARD_FRAME_POINTER_REGNUM))
+ {
+ cfa_restores = or1k_restore_reg (HARD_FRAME_POINTER_REGNUM,
+ reg_offset, cfa_restores);
+ reg_offset += UNITS_PER_WORD;
+ }
+
+ /* Restore link register. */
+ if (callee_saved_regno_p (LR_REGNUM))
+ {
+ cfa_restores = or1k_restore_reg (LR_REGNUM, reg_offset, cfa_restores);
+ reg_offset += UNITS_PER_WORD;
+ }
+ gcc_assert (reg_offset == sp_offset);
+
+ /* Restore stack pointer. */
+ insn = emit_insn (gen_frame_addsi3 (stack_pointer_rtx, stack_pointer_rtx,
+ GEN_INT (sp_offset)));
+ RTX_FRAME_RELATED_P (insn) = 1;
+ REG_NOTES (insn) = cfa_restores;
+ add_reg_note (insn, REG_CFA_DEF_CFA, stack_pointer_rtx);
+
+ /* Move up to the stack frame of an exception handler. */
+ if (crtl->calls_eh_return)
+ emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx,
+ EH_RETURN_STACKADJ_RTX));
+}
+
+/* Worker for TARGET_INIT_PIC_REG.
+ Initialize the cfun->machine->set_got_insn rtx and insert it at the entry
+ of the current function. The rtx is just a temporary placeholder for
+ the GOT and will be replaced or removed during or1k_expand_prologue. */
+
+static void
+or1k_init_pic_reg (void)
+{
+ start_sequence ();
+
+ cfun->machine->set_got_insn
+ = emit_insn (gen_set_got_tmp (pic_offset_table_rtx));
+
+ rtx_insn *seq = get_insns ();
+ end_sequence ();
+
+ edge entry_edge = single_succ_edge (ENTRY_BLOCK_PTR_FOR_FN (cfun));
+ insert_insn_on_edge (seq, entry_edge);
+ commit_one_edge_insertion (entry_edge);
+}
+
+#undef TARGET_INIT_PIC_REG
+#define TARGET_INIT_PIC_REG or1k_init_pic_reg
+#undef TARGET_USE_PSEUDO_PIC_REG
+#define TARGET_USE_PSEUDO_PIC_REG hook_bool_void_true
+
+/* Worker for INITIAL_FRAME_ADDRESS_RTX.
+ Returns the RTX representing the address of the initial stack frame. */
+
+rtx
+or1k_initial_frame_addr ()
+{
+ /* Use this to force a stack frame for the current function. */
+ crtl->accesses_prior_frames = 1;
+ return arg_pointer_rtx;
+}
+
+/* Worker for DYNAMIC_CHAIN_ADDRESS.
+ Returns the RTX representing the address of where the caller's frame pointer
+ may be stored on the stack. */
+
+rtx
+or1k_dynamic_chain_addr (rtx frame)
+{
+ return plus_constant (Pmode, frame, -2 * UNITS_PER_WORD);
+}
+
+/* Worker for RETURN_ADDR_RTX.
+ Returns the RTX representing the address of where the link register may be
+ stored on the stack. */
+
+rtx
+or1k_return_addr (int, rtx frame)
+{
+ return gen_frame_mem (Pmode, plus_constant (Pmode, frame, -UNITS_PER_WORD));
+}
+
+/* Worker for TARGET_FRAME_POINTER_REQUIRED.
+ Returns true if the current function must use a frame pointer. */
+
+static bool
+or1k_frame_pointer_required ()
+{
+ /* ??? While IRA checks accesses_prior_frames, reload does not.
+ We do want the frame pointer for this case. */
+ return (crtl->accesses_prior_frames || crtl->profile);
+}
+
+/* Expand the "eh_return" pattern.
+ Used for defining __builtin_eh_return, this will emit RTX to override the
+ current function's return address stored on the stack. The emitted RTX is
+ inserted before the epilogue so we can't just update the link register.
+ This is used when handling exceptions to jump into the exception handler
+ catch block upon return from _Unwind_RaiseException. */
+
+void
+or1k_expand_eh_return (rtx eh_addr)
+{
+ rtx lraddr;
+
+ lraddr = gen_frame_mem (Pmode, plus_constant (Pmode,
+ arg_pointer_rtx,
+ -UNITS_PER_WORD));
+ /* Set address to volitile to ensure the store doesn't get optimized out. */
+ MEM_VOLATILE_P (lraddr) = true;
+ emit_move_insn (lraddr, eh_addr);
+}
+
+/* Helper for defining INITIAL_ELIMINATION_OFFSET.
+ We allow the following eliminiations:
+ FP -> HARD_FP or SP
+ AP -> HARD_FP or SP
+
+ HFP and AP are the same which is handled below. */
+
+HOST_WIDE_INT
+or1k_initial_elimination_offset (int from, int to)
+{
+ HOST_WIDE_INT offset;
+
+ /* Set OFFSET to the offset from the stack pointer. */
+ switch (from)
+ {
+ /* Incoming args are all the way up at the previous frame. */
+ case ARG_POINTER_REGNUM:
+ offset = cfun->machine->total_size;
+ break;
+
+ /* Local args grow downward from the saved registers. */
+ case FRAME_POINTER_REGNUM:
+ offset = cfun->machine->args_size + cfun->machine->local_vars_size;
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+
+ if (to == HARD_FRAME_POINTER_REGNUM)
+ offset -= cfun->machine->total_size;
+
+ return offset;
+}
+
+/* Worker for TARGET_LEGITIMATE_ADDRESS_P.
+ Returns true if X is a legitimate address RTX on OpenRISC. */
+
+static bool
+or1k_legitimate_address_p (machine_mode, rtx x, bool strict_p)
+{
+ rtx base, addend;
+
+ switch (GET_CODE (x))
+ {
+ case REG:
+ base = x;
+ break;
+
+ case PLUS:
+ base = XEXP (x, 0);
+ addend = XEXP (x, 1);
+ if (!REG_P (base))
+ return false;
+ /* Register elimination is going to adjust all of these offsets.
+ We might as well keep them as a unit until then. */
+ if (!strict_p && virtual_frame_reg_operand (base, VOIDmode))
+ return CONST_INT_P (addend);
+ if (!satisfies_constraint_I (addend))
+ return false;
+ break;
+
+ case LO_SUM:
+ base = XEXP (x, 0);
+ if (!REG_P (base))
+ return false;
+ x = XEXP (x, 1);
+ switch (GET_CODE (x))
+ {
+ case CONST:
+ case SYMBOL_REF:
+ case LABEL_REF:
+ /* Assume legitimize_address properly categorized
+ the symbol. Continue to check the base. */
+ break;
+
+ case UNSPEC:
+ switch (XINT (x, 1))
+ {
+ case UNSPEC_GOT:
+ case UNSPEC_GOTOFF:
+ case UNSPEC_TPOFF:
+ case UNSPEC_GOTTPOFF:
+ /* Assume legitimize_address properly categorized
+ the symbol. Continue to check the base. */
+ break;
+ default:
+ return false;
+ }
+ break;
+
+ default:
+ return false;
+ }
+ break;
+
+ default:
+ return false;
+ }
+
+ unsigned regno = REGNO (base);
+ if (regno >= FIRST_PSEUDO_REGISTER)
+ {
+ if (strict_p)
+ regno = reg_renumber[regno];
+ else
+ return true;
+ }
+ if (strict_p)
+ return regno <= 31;
+ else
+ return REGNO_OK_FOR_BASE_P (regno);
+}
+
+/* Return the TLS type for TLS symbols, 0 otherwise. */
+
+static tls_model
+or1k_tls_symbolic_operand (rtx op)
+{
+ rtx sym, addend;
+ split_const (op, &sym, &addend);
+ if (SYMBOL_REF_P (sym))
+ return SYMBOL_REF_TLS_MODEL (sym);
+ return TLS_MODEL_NONE;
+}
+
+/* Get a reference to the '__tls_get_addr' symbol. */
+
+static GTY(()) rtx gen_tls_tga;
+
+static rtx
+gen_tls_get_addr (void)
+{
+ if (!gen_tls_tga)
+ gen_tls_tga = init_one_libfunc ("__tls_get_addr");
+ return gen_tls_tga;
+}
+
+/* Emit a call to '__tls_get_addr'. */
+
+static void
+or1k_tls_call (rtx dest, rtx arg)
+{
+ emit_library_call_value (gen_tls_get_addr (), dest, LCT_CONST,
+ Pmode, arg, Pmode);
+}
+
+/* Helper for or1k_legitimize_address_1. Wrap X in an unspec. */
+
+static rtx
+gen_sym_unspec (rtx x, int kind)
+{
+ return gen_rtx_UNSPEC (Pmode, gen_rtvec (1, x), kind);
+}
+
+/* Worker for TARGET_LEGITIMIZE_ADDRESS_DISPLACEMENT.
+ Split an out-of-range address displacement into hi and lo parts.
+ The hi part will have to be loaded into a register separately,
+ but the low part will be folded into the memory operand. */
+
+static bool
+or1k_legitimize_address_displacement (rtx *off1, rtx *off2,
+ poly_int64 poly_offset, machine_mode)
+{
+ HOST_WIDE_INT orig_offset = poly_offset;
+ HOST_WIDE_INT lo, hi;
+
+ /* If the displacement is within range of 2 addi insns, prefer that.
+ Otherwise split as per normal,@which point the register allocator
+ will see that OFF1 is not a valid add3 operand and load it into
+ a register, as desired. */
+ if (orig_offset >= 0 && orig_offset < 2 * 32767)
+ {
+ hi = 32767;
+ lo = orig_offset - hi;
+ }
+ else if (orig_offset < 0 && orig_offset >= 2 * -32768)
+ {
+ hi = -32768;
+ lo = orig_offset - hi;
+ }
+ else
+ {
+ lo = sext_hwi (orig_offset, 16);
+ hi = orig_offset - lo;
+ }
+
+ *off1 = GEN_INT (hi);
+ *off2 = GEN_INT (lo);
+ return true;
+}
+
+#undef TARGET_LEGITIMIZE_ADDRESS_DISPLACEMENT
+#define TARGET_LEGITIMIZE_ADDRESS_DISPLACEMENT \
+ or1k_legitimize_address_displacement
+
+/* Helper function to implement both TARGET_LEGITIMIZE_ADDRESS and expand the
+ patterns "movqi", "movqi" and "movsi". Returns an valid OpenRISC RTX that
+ represents the argument X which is an invalid address RTX. The argument
+ SCRATCH may be used as a temporary when building addresses. */
+
+static rtx
+or1k_legitimize_address_1 (rtx x, rtx scratch)
+{
+ rtx base, addend, t1, t2;
+ tls_model tls_kind = TLS_MODEL_NONE;
+ bool is_local = true;
+
+ split_const(x, &base, &addend);
+ switch (GET_CODE (base))
+ {
+ default:
+ gcc_assert (can_create_pseudo_p ());
+ base = force_reg (Pmode, base);
+ break;
+
+ case REG:
+ case SUBREG:
+ break;
+
+ case SYMBOL_REF:
+ tls_kind = SYMBOL_REF_TLS_MODEL (base);
+ is_local = SYMBOL_REF_LOCAL_P (base);
+ /* FALLTHRU */
+
+ case LABEL_REF:
+ switch (tls_kind)
+ {
+ case TLS_MODEL_NONE:
+ t1 = can_create_pseudo_p () ? gen_reg_rtx (Pmode) : scratch;
+ if (!flag_pic)
+ {
+ emit_insn (gen_rtx_SET (t1, gen_rtx_HIGH (Pmode, x)));
+ return gen_rtx_LO_SUM (Pmode, t1, x);
+ }
+ else if (is_local)
+ {
+ crtl->uses_pic_offset_table = 1;
+ t2 = gen_sym_unspec (x, UNSPEC_GOTOFF);
+ emit_insn (gen_rtx_SET (t1, gen_rtx_HIGH (Pmode, t2)));
+ emit_insn (gen_add3_insn (t1, t1, pic_offset_table_rtx));
+ return gen_rtx_LO_SUM (Pmode, t1, copy_rtx (t2));
+ }
+ else
+ {
+ base = gen_sym_unspec (base, UNSPEC_GOT);
+ crtl->uses_pic_offset_table = 1;
+ t2 = gen_rtx_LO_SUM (Pmode, pic_offset_table_rtx, base);
+ t2 = gen_const_mem (Pmode, t2);
+ emit_insn (gen_rtx_SET (t1, t2));
+ base = t1;
+ }
+ break;
+
+ case TLS_MODEL_GLOBAL_DYNAMIC:
+ case TLS_MODEL_LOCAL_DYNAMIC:
+ /* TODO: For now, treat LD as GD. */
+ t1 = gen_reg_rtx (Pmode);
+ base = gen_sym_unspec (base, UNSPEC_TLSGD);
+ emit_insn (gen_rtx_SET (t1, gen_rtx_HIGH (Pmode, base)));
+ emit_insn (gen_rtx_SET (t1, gen_rtx_LO_SUM (Pmode, t1, base)));
+ crtl->uses_pic_offset_table = 1;
+ emit_insn (gen_add3_insn (t1, t1, pic_offset_table_rtx));
+ base = gen_reg_rtx (Pmode);
+ or1k_tls_call (base, t1);
+ break;
+
+ case TLS_MODEL_INITIAL_EXEC:
+ t1 = gen_reg_rtx (Pmode);
+ t2 = gen_reg_rtx (Pmode);
+ base = gen_sym_unspec (base, UNSPEC_GOTTPOFF);
+ emit_insn (gen_rtx_SET (t1, gen_rtx_HIGH (Pmode, base)));
+ crtl->uses_pic_offset_table = 1;
+ emit_insn (gen_add3_insn (t1, t1, pic_offset_table_rtx));
+ t1 = gen_rtx_LO_SUM (Pmode, t1, base);
+ emit_move_insn (t2, gen_const_mem (Pmode, t1));
+ t1 = gen_rtx_REG (Pmode, TLS_REGNUM);
+ emit_insn (gen_add3_insn (t2, t2, t1));
+ base = t2;
+ break;
+
+ case TLS_MODEL_LOCAL_EXEC:
+ x = gen_sym_unspec (x, UNSPEC_TPOFF);
+ t1 = gen_reg_rtx (Pmode);
+ emit_insn (gen_rtx_SET (t1, gen_rtx_HIGH (Pmode, x)));
+ t2 = gen_rtx_REG (Pmode, TLS_REGNUM);
+ emit_insn (gen_add3_insn (t1, t1, t2));
+ return gen_rtx_LO_SUM (Pmode, t1, x);
+
+ default:
+ gcc_unreachable ();
+ }
+ break;
+
+ /*
+ * Accept what we may have already emitted.
+ */
+
+ case LO_SUM:
+ case UNSPEC:
+ return x;
+ }
+
+ /* If we get here, we still have addend outstanding. */
+ gcc_checking_assert (register_operand (base, Pmode));
+ if (addend == const0_rtx)
+ return base;
+ if (satisfies_constraint_I (addend)
+ || virtual_frame_reg_operand (base, VOIDmode))
+ return gen_rtx_PLUS (Pmode, base, addend);
+ else
+ {
+ rtx hi, lo;
+ bool ok = (or1k_legitimize_address_displacement
+ (&hi, &lo, INTVAL (addend), SImode));
+ gcc_assert (ok);
+
+ t2 = can_create_pseudo_p () ? gen_reg_rtx (Pmode) : scratch;
+ if (satisfies_constraint_I (hi))
+ emit_insn (gen_addsi3 (t2, base, hi));
+ else
+ {
+ t1 = can_create_pseudo_p () ? gen_reg_rtx (Pmode) : scratch;
+ emit_move_insn (t1, hi);
+ emit_insn (gen_add3_insn (t2, base, t1));
+ }
+ if (lo == const0_rtx)
+ return t2;
+ else
+ return gen_rtx_PLUS (Pmode, t2, lo);
+ }
+}
+
+/* Worker for TARGET_LEGITIMIZE_ADDRESS.
+ This delegates implementation to or1k_legitimize_address_1. */
+
+static rtx
+or1k_legitimize_address (rtx x, rtx oldx ATTRIBUTE_UNUSED, machine_mode)
+{
+ return or1k_legitimize_address_1 (x, NULL_RTX);
+}
+
+#undef TARGET_LEGITIMIZE_ADDRESS
+#define TARGET_LEGITIMIZE_ADDRESS or1k_legitimize_address
+
+/* Worker for TARGET_DELEGITIMIZE_ADDRESS.
+ In the name of slightly smaller debug output, and to cater to
+ general assembler lossage, recognize PIC+GOTOFF and turn it back
+ into a direct symbol reference. */
+
+static rtx
+or1k_delegitimize_address (rtx x)
+{
+ if (GET_CODE (x) == UNSPEC)
+ {
+ /* The LO_SUM to which X was attached has been stripped.
+ Since the only legitimate address we could have been computing
+ is that of the symbol, assume that's what we've done. */
+ if (XINT (x, 1) == UNSPEC_GOTOFF)
+ return XVECEXP (x, 0, 0);
+ }
+ else if (MEM_P (x))
+ {
+ rtx addr = XEXP (x, 0);
+ if (GET_CODE (addr) == LO_SUM
+ && XEXP (addr, 0) == pic_offset_table_rtx)
+ {
+ rtx inner = XEXP (addr, 1);
+ if (GET_CODE (inner) == UNSPEC
+ && XINT (inner, 1) == UNSPEC_GOT)
+ return XVECEXP (inner, 0, 0);
+ }
+ }
+ return delegitimize_mem_from_attrs (x);
+}
+
+#undef TARGET_DELEGITIMIZE_ADDRESS
+#define TARGET_DELEGITIMIZE_ADDRESS or1k_delegitimize_address
+
+/* Worker for TARGET_CANNOT_FORCE_CONST_MEM.
+ Primarily this is required for TLS symbols, but given that our move
+ patterns *ought* to be able to handle any symbol at any time, we
+ should never be spilling symbolic operands to the constant pool, ever. */
+
+static bool
+or1k_cannot_force_const_mem (machine_mode, rtx x)
+{
+ rtx_code code = GET_CODE (x);
+ return (code == SYMBOL_REF
+ || code == LABEL_REF
+ || code == CONST
+ || code == HIGH);
+}
+
+#undef TARGET_CANNOT_FORCE_CONST_MEM
+#define TARGET_CANNOT_FORCE_CONST_MEM or1k_cannot_force_const_mem
+
+/* Worker for TARGET_LEGITIMATE_CONSTANT_P.
+ Returns true is the RTX X represents a constant that can be used as an
+ immediate operand in OpenRISC. */
+
+static bool
+or1k_legitimate_constant_p (machine_mode, rtx x)
+{
+ switch (GET_CODE (x))
+ {
+ case CONST_INT:
+ case CONST_WIDE_INT:
+ case HIGH:
+ /* We construct these, rather than spilling to memory. */
+ return true;
+
+ case CONST:
+ case SYMBOL_REF:
+ case LABEL_REF:
+ /* These may need to be split and not reconstructed. */
+ return or1k_tls_symbolic_operand (x) == TLS_MODEL_NONE;
+
+ default:
+ return false;
+ }
+}
+
+#undef TARGET_LEGITIMATE_CONSTANT_P
+#define TARGET_LEGITIMATE_CONSTANT_P or1k_legitimate_constant_p
+
+/* Worker for TARGET_PASS_BY_REFERENCE.
+ Returns true if an argument of TYPE in MODE should be passed by reference
+ as required by the OpenRISC ABI. On OpenRISC structures, unions and
+ arguments larger than 64-bits are passed by reference. */
+
+static bool
+or1k_pass_by_reference (cumulative_args_t, machine_mode mode,
+ const_tree type, bool)
+{
+ HOST_WIDE_INT size;
+ if (type)
+ {
+ if (AGGREGATE_TYPE_P (type))
+ return true;
+ size = int_size_in_bytes (type);
+ }
+ else
+ size = GET_MODE_SIZE (mode);
+ return size < 0 || size > 8;
+}
+
+/* Worker for TARGET_FUNCTION_VALUE.
+ Returns an RTX representing the location where function return values will
+ be stored. On OpenRISC this is the register r11. 64-bit return value's
+ upper 32-bits are returned in r12, this is automatically done by GCC. */
+
+static rtx
+or1k_function_value (const_tree valtype,
+ const_tree fn_decl_or_type ATTRIBUTE_UNUSED,
+ bool outgoing ATTRIBUTE_UNUSED)
+{
+ return gen_rtx_REG (TYPE_MODE (valtype), RV_REGNUM);
+}
+
+/* Worker for TARGET_LIBCALL_VALUE.
+ Returns an RTX representing the location where function return values to
+ external libraries will be stored. On OpenRISC this the same as local
+ function calls. */
+
+static rtx
+or1k_libcall_value (machine_mode mode,
+ const_rtx fun ATTRIBUTE_UNUSED)
+{
+ return gen_rtx_REG (mode, RV_REGNUM);
+}
+
+
+/* Worker for TARGET_FUNCTION_VALUE_REGNO_P.
+ Returns true if REGNO is a valid register for storing a function return
+ value. */
+
+static bool
+or1k_function_value_regno_p (const unsigned int regno)
+{
+ return (regno == RV_REGNUM);
+}
+
+/* Worker for TARGET_STRICT_ARGUMENT_NAMING.
+ The final named argument in a variatic function is named. */
+
+static bool
+or1k_strict_argument_naming (cumulative_args_t ca ATTRIBUTE_UNUSED)
+{
+ return true;
+}
+
+#undef TARGET_STRICT_ARGUMENT_NAMING
+#define TARGET_STRICT_ARGUMENT_NAMING or1k_strict_argument_naming
+
+/* Worker for TARGET_FUNCTION_ARG.
+ Return the next register to be used to hold a function argument or NULL_RTX
+ if there's no more space. Arugment CUM_V represents the current argument
+ offset, zero for the first function argument. OpenRISC function arguments
+ maybe be passed in registers r3 to r8. */
+
+static rtx
+or1k_function_arg (cumulative_args_t cum_v, machine_mode mode,
+ const_tree type ATTRIBUTE_UNUSED,
+ bool named)
+{
+ /* VOIDmode is passed as a special flag for "last argument". */
+ if (mode == VOIDmode)
+ return NULL_RTX;
+
+ CUMULATIVE_ARGS *cum = get_cumulative_args (cum_v);
+ int nreg = CEIL (GET_MODE_SIZE (mode), UNITS_PER_WORD);
+
+ /* Note that all large arguments are passed by reference. */
+ gcc_assert (nreg <= 2);
+ if (named && *cum + nreg <= 6)
+ return gen_rtx_REG (mode, *cum + 3);
+ else
+ return NULL_RTX;
+}
+
+/* Worker for TARGET_FUNCTION_ARG_ADVANCE.
+ Update the cumulative args descriptor CUM_V to advance past the next function
+ argument. Note, this is not called for arguments passed on the stack. */
+
+static void
+or1k_function_arg_advance (cumulative_args_t cum_v, machine_mode mode,
+ const_tree type ATTRIBUTE_UNUSED, bool named)
+{
+ CUMULATIVE_ARGS *cum = get_cumulative_args (cum_v);
+ int nreg = CEIL (GET_MODE_SIZE (mode), UNITS_PER_WORD);
+
+ /* Note that all large arguments are passed by reference. */
+ gcc_assert (nreg <= 2);
+ if (named)
+ *cum += nreg;
+}
+
+/* worker function for TARGET_RETURN_IN_MEMORY.
+ Returns true if the argument of TYPE should be returned in memory. On
+ OpenRISC this is any value larger than 64-bits. */
+
+static bool
+or1k_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED)
+{
+ const HOST_WIDE_INT size = int_size_in_bytes (type);
+ return (size == -1 || size > (2 * UNITS_PER_WORD));
+}
+
+/* Print reloc(x + add). */
+
+static void
+output_addr_reloc (FILE *stream, rtx x, HOST_WIDE_INT add, const char *reloc)
+{
+ if (*reloc)
+ {
+ fputs (reloc, stream);
+ fputc ('(', stream);
+ }
+ output_addr_const (stream, x);
+ if (add)
+ {
+ if (add > 0)
+ fputc ('+', stream);
+ fprintf (stream, HOST_WIDE_INT_PRINT_DEC, add);
+ }
+ if (*reloc)
+ fputc (')', stream);
+}
+
+enum reloc_kind
+{
+ RKIND_LO,
+ RKIND_HI,
+ RKIND_MAX
+};
+
+enum reloc_type
+{
+ RTYPE_DIRECT,
+ RTYPE_GOT,
+ RTYPE_GOTOFF,
+ RTYPE_TPOFF,
+ RTYPE_GOTTPOFF,
+ RTYPE_TLSGD,
+ RTYPE_MAX
+};
+
+static void
+print_reloc (FILE *stream, rtx x, HOST_WIDE_INT add, reloc_kind kind)
+{
+ /* All data relocations. A NULL in this table indicates a form that
+ we expect to never generate, while "" indicates a form that requires
+ no special markup. */
+ static const char * const relocs[RKIND_MAX][RTYPE_MAX] = {
+ { "lo", "got", "gotofflo", "tpofflo", "gottpofflo", "tlsgdlo" },
+ { "ha", NULL, "gotoffha", "tpoffha", "gottpoffha", "tlsgdhi" },
+ };
+ reloc_type type = RTYPE_DIRECT;
+
+ if (GET_CODE (x) == UNSPEC)
+ {
+ switch (XINT (x, 1))
+ {
+ case UNSPEC_GOT:
+ type = RTYPE_GOT;
+ break;
+ case UNSPEC_GOTOFF:
+ type = RTYPE_GOTOFF;
+ break;
+ case UNSPEC_TPOFF:
+ type = RTYPE_TPOFF;
+ break;
+ case UNSPEC_GOTTPOFF:
+ type = RTYPE_GOTTPOFF;
+ break;
+ case UNSPEC_TLSGD:
+ type = RTYPE_TLSGD;
+ break;
+ default:
+ output_operand_lossage("invalid relocation");
+ return;
+ }
+ x = XVECEXP (x, 0, 0);
+ }
+
+ const char *reloc = relocs[kind][type];
+ if (reloc == NULL)
+ output_operand_lossage("invalid relocation");
+ else
+ output_addr_reloc (stream, x, add, reloc);
+}
+
+/* Worker for TARGET_PRINT_OPERAND_ADDRESS.
+ Prints the argument ADDR, an address RTX, to the file FILE. The output is
+ formed as expected by the OpenRISC assembler. Examples:
+
+ RTX OUTPUT
+ (reg:SI 3) 0(r3)
+ (plus:SI (reg:SI 3) (const_int 4)) 0x4(r3)
+ (lo_sum:SI (reg:SI 3) (symbol_ref:SI ("x")))) lo(x)(r3) */
+
+static void
+or1k_print_operand_address (FILE *file, machine_mode, rtx addr)
+{
+ rtx offset;
+
+ switch (GET_CODE (addr))
+ {
+ case REG:
+ fputc ('0', file);
+ break;
+
+ case PLUS:
+ offset = XEXP (addr, 1);
+ addr = XEXP (addr, 0);
+ gcc_assert (CONST_INT_P (offset));
+ if (GET_CODE (addr) == LO_SUM)
+ {
+ print_reloc (file, XEXP (addr, 1), INTVAL (offset), RKIND_LO);
+ addr = XEXP (addr, 0);
+ }
+ else
+ output_addr_const (file, offset);
+ break;
+
+ case LO_SUM:
+ offset = XEXP (addr, 1);
+ addr = XEXP (addr, 0);
+ print_reloc (file, offset, 0, RKIND_LO);
+ break;
+
+ default:
+ output_addr_const (file, addr);
+ return;
+ }
+
+ fprintf (file, "(%s)", reg_names[REGNO (addr)]);
+}
+
+/* Worker for TARGET_PRINT_OPERAND.
+ Print operand X, an RTX, to the file FILE. The output is formed as expected
+ by the OpenRISC assember. CODE is the letter following a '%' in an
+ instrunction template used to control the RTX output. Example(s):
+
+ CODE RTX OUTPUT COMMENT
+ 0 (reg:SI 3) r3 output an operand
+ r (reg:SI 3) r3 output a register or const zero
+ H (reg:SI 3) r4 output the high pair register
+ h (symbol_ref:SI ("x")) ha(x) output a signed high relocation
+ L (symbol_ref:SI ("x")) lo(x) output a low relocation
+
+ Note, '#' is a special code used to fill the branch delay slot with an l.nop
+ instruction. The l.nop (no-op) instruction is only outputted when the delay
+ slot has not been filled. */
+
+static void
+or1k_print_operand (FILE *file, rtx x, int code)
+{
+ rtx operand = x;
+
+ switch (code)
+ {
+ case '#':
+ /* Conditionally add a nop in unfilled delay slot. */
+ if (final_sequence == NULL)
+ fputs ("\n\t l.nop\n", file);
+ break;
+
+ case 'r':
+ if (REG_P (x))
+ fprintf (file, "%s", reg_names[REGNO (operand)]);
+ else if (x == CONST0_RTX (GET_MODE (x)))
+ fprintf (file, "r0");
+ else
+ output_operand_lossage ("invalid %%r value");
+ break;
+
+ case 'H':
+ if (REG_P (x))
+ fprintf (file, "%s", reg_names[REGNO (operand) + 1]);
+ else
+ output_operand_lossage ("invalid %%H value");
+ break;
+
+ case 'h':
+ print_reloc (file, x, 0, RKIND_HI);
+ break;
+ case 'L':
+ print_reloc (file, x, 0, RKIND_LO);
+ break;
+ case 'P':
+ if (!flag_pic || SYMBOL_REF_LOCAL_P (x))
+ output_addr_const (file, x);
+ else
+ output_addr_reloc (file, x, 0, "plt");
+ break;
+
+ case 0:
+ /* Print an operand as without a modifier letter. */
+ switch (GET_CODE (operand))
+ {
+ case REG:
+ if (REGNO (operand) > 31)
+ internal_error ("internal error: bad register: %d",
+ REGNO (operand));
+ fprintf (file, "%s", reg_names[REGNO (operand)]);
+ break;
+
+ case MEM:
+ output_address (GET_MODE (XEXP (operand, 0)), XEXP (operand, 0));
+ break;
+
+ case CODE_LABEL:
+ case LABEL_REF:
+ output_asm_label (operand);
+ break;
+
+ default:
+ /* No need to handle all strange variants, let output_addr_const
+ do it for us. */
+ if (CONSTANT_P (operand))
+ output_addr_const (file, operand);
+ else
+ internal_error ("unexpected operand: %d", GET_CODE (operand));
+ break;
+ }
+ break;
+
+ default:
+ output_operand_lossage ("unknown operand letter: '%c'", code);
+ break;
+ }
+}
+
+/* Worker for TARGET_TRAMPOLINE_INIT.
+ This is called to initialize a trampoline. The argument M_TRAMP is an RTX
+ for the memory block to be initialized with trampoline code. The argument
+ FNDECL contains the definition of the nested function to be called, we use
+ this to get the function's address. The argument CHAIN is an RTX for the
+ static chain value to be passed to the nested function. */
+
+static void
+or1k_trampoline_init (rtx m_tramp, tree fndecl, rtx chain)
+{
+ const unsigned movhi_r13 = (0x06u << 26) | (13 << 21);
+ const unsigned movhi_r11 = (0x06u << 26) | (11 << 21);
+ const unsigned ori_r13_r13 = (0x2a << 26) | (13 << 21) | (13 << 16);
+ const unsigned ori_r11_r11 = (0x2a << 26) | (11 << 21) | (11 << 16);
+ const unsigned jr_r13 = (0x11 << 26) | (13 << 11);
+ rtx tramp[5], fnaddr, f_hi, f_lo, c_hi, c_lo;
+
+ fnaddr = force_operand (XEXP (DECL_RTL (fndecl), 0), NULL);
+ f_hi = expand_binop (SImode, lshr_optab, fnaddr, GEN_INT (16),
+ NULL, true, OPTAB_DIRECT);
+ f_lo = expand_binop (SImode, and_optab, fnaddr, GEN_INT (0xffff),
+ NULL, true, OPTAB_DIRECT);
+
+ chain = force_operand (chain, NULL);
+ c_hi = expand_binop (SImode, lshr_optab, chain, GEN_INT (16),
+ NULL, true, OPTAB_DIRECT);
+ c_lo = expand_binop (SImode, and_optab, chain, GEN_INT (0xffff),
+ NULL, true, OPTAB_DIRECT);
+
+ /* We want to generate
+ *
+ * l.movhi r13,hi(nested_func)
+ * l.movhi r11,hi(static_chain)
+ * l.ori r13,r13,lo(nested_func)
+ * l.jr r13
+ * l.ori r11,r11,lo(static_chain)
+ */
+ tramp[0] = expand_binop (SImode, ior_optab, f_hi,
+ gen_int_mode (movhi_r13, SImode),
+ f_hi, true, OPTAB_DIRECT);
+ tramp[1] = expand_binop (SImode, ior_optab, c_hi,
+ gen_int_mode (movhi_r11, SImode),
+ c_hi, true, OPTAB_DIRECT);
+ tramp[2] = expand_binop (SImode, ior_optab, f_lo,
+ gen_int_mode (ori_r13_r13, SImode),
+ f_lo, true, OPTAB_DIRECT);
+ tramp[4] = expand_binop (SImode, ior_optab, c_lo,
+ gen_int_mode (ori_r11_r11, SImode),
+ c_lo, true, OPTAB_DIRECT);
+ tramp[3] = gen_int_mode (jr_r13, SImode);
+
+ for (int i = 0; i < 5; ++i)
+ {
+ rtx mem = adjust_address (m_tramp, SImode, i * 4);
+ emit_move_insn (mem, tramp[i]);
+ }
+
+ /* Flushing the trampoline from the instruction cache needs
+ to be done here. */
+}
+
+/* Worker for TARGET_HARD_REGNO_MODE_OK.
+ Returns true if the hard register REGNO is ok for storing values of mode
+ MODE. */
+
+static bool
+or1k_hard_regno_mode_ok (unsigned int regno, machine_mode mode)
+{
+ /* For OpenRISC, GENERAL_REGS can hold anything, while
+ FLAG_REGS are really single bits within SP[SR]. */
+ if (REGNO_REG_CLASS (regno) == FLAG_REGS)
+ return mode == BImode;
+ return true;
+}
+
+#undef TARGET_HARD_REGNO_MODE_OK
+#define TARGET_HARD_REGNO_MODE_OK or1k_hard_regno_mode_ok
+
+/* Worker for TARGET_CAN_CHANGE_MODE_CLASS.
+ Returns true if its ok to change a register in class RCLASS from mode FROM to
+ mode TO. In general OpenRISC registers, other than special flags, handle all
+ supported classes. */
+
+static bool
+or1k_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
+{
+ if (rclass == FLAG_REGS)
+ return from == to;
+ return true;
+}
+
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS or1k_can_change_mode_class
+
+/* Expand the patterns "movqi", "movqi" and "movsi". The argument OP0 is the
+ destination and OP1 is the source. This expands to set OP0 to OP1. OpenRISC
+ cannot do memory to memory assignments so for those cases we force one
+ argument to a register. Constants that can't fit into a 16-bit immediate are
+ split. Symbols are lagitimized using split relocations. */
+
+void
+or1k_expand_move (machine_mode mode, rtx op0, rtx op1)
+{
+ if (MEM_P (op0))
+ {
+ if (!const0_operand(op1, mode))
+ op1 = force_reg (mode, op1);
+ }
+ else if (mode == QImode || mode == HImode)
+ {
+ /* ??? Maybe promote MEMs and CONST_INT to SImode,
+ and then squish back with gen_lowpart. */
+ }
+ else
+ {
+ switch (GET_CODE (op1))
+ {
+ case CONST_INT:
+ if (!input_operand (op1, mode))
+ {
+ HOST_WIDE_INT i = INTVAL (op1);
+ HOST_WIDE_INT lo = i & 0xffff;
+ HOST_WIDE_INT hi = i ^ lo;
+ rtx subtarget = op0;
+
+ if (!cse_not_expected && can_create_pseudo_p ())
+ subtarget = gen_reg_rtx (SImode);
+ emit_insn (gen_rtx_SET (subtarget, GEN_INT (hi)));
+ emit_insn (gen_iorsi3 (op0, subtarget, GEN_INT (lo)));
+ return;
+ }
+ break;
+
+ case CONST:
+ case SYMBOL_REF:
+ case LABEL_REF:
+ op1 = or1k_legitimize_address_1 (op1, op0);
+ break;
+
+ default:
+ break;
+ }
+ }
+ emit_insn (gen_rtx_SET (op0, op1));
+}
+
+/* Used to expand patterns "movsicc", "movqicc", "movhicc", "cstoresi4" and
+ "cbranchsi4".
+ Expands a comparison where OPERANDS is an array of RTX describing the
+ comparison. The first argument OPERANDS[0] is the operator and OPERANDS[1]
+ and OPERANDS[2] are the operands. Split out the compare into SR[F] and
+ return a new operation in OPERANDS[0]. The inputs OPERANDS[1] and
+ OPERANDS[2] are not directly used, only overridden. */
+
+void
+or1k_expand_compare (rtx *operands)
+{
+ rtx sr_f = gen_rtx_REG (BImode, SR_F_REGNUM);
+
+ /* The RTL may receive an immediate in argument 1 of the compare, this is not
+ supported unless we have l.sf*i instructions, force them into registers. */
+ if (!TARGET_SFIMM)
+ XEXP (operands[0], 1) = force_reg (SImode, XEXP (operands[0], 1));
+
+ /* Emit the given comparison into the Flag bit. */
+ PUT_MODE (operands[0], BImode);
+ emit_insn (gen_rtx_SET (sr_f, operands[0]));
+
+ /* Adjust the operands for use in the caller. */
+ operands[0] = gen_rtx_NE (VOIDmode, sr_f, const0_rtx);
+ operands[1] = sr_f;
+ operands[2] = const0_rtx;
+}
+
+/* Expand the patterns "call", "sibcall", "call_value" and "sibcall_value".
+ Expands a function call where argument RETVAL is an optional RTX providing
+ return value storage, the argument FNADDR is and RTX describing the function
+ to call, the argument CALLARG1 is the number or registers used as operands
+ and the argument SIBCALL should be true if this is a nested function call.
+ If FNADDR is a non local symbol and FLAG_PIC is enabled this will generate
+ a PLT call. */
+
+void
+or1k_expand_call (rtx retval, rtx fnaddr, rtx callarg1, bool sibcall)
+{
+ rtx call, use = NULL;
+
+ /* Calls via the PLT require the PIC register. */
+ if (flag_pic
+ && GET_CODE (XEXP (fnaddr, 0)) == SYMBOL_REF
+ && !SYMBOL_REF_LOCAL_P (XEXP (fnaddr, 0)))
+ {
+ crtl->uses_pic_offset_table = 1;
+ rtx hard_pic = gen_rtx_REG (Pmode, REAL_PIC_OFFSET_TABLE_REGNUM);
+ emit_move_insn (hard_pic, pic_offset_table_rtx);
+ use_reg (&use, hard_pic);
+ }
+
+ if (!call_insn_operand (XEXP (fnaddr, 0), Pmode))
+ {
+ fnaddr = copy_to_mode_reg (Pmode, XEXP (fnaddr, 0));
+ fnaddr = gen_rtx_MEM (SImode, fnaddr);
+ }
+
+ call = gen_rtx_CALL (VOIDmode, fnaddr, callarg1);
+ if (retval)
+ call = gen_rtx_SET (retval, call);
+
+ /* Normal calls clobber LR. This is required in order to
+ prevent e.g. a prologue store of LR being placed into
+ the delay slot of the call, after it has been updated. */
+ if (!sibcall)
+ {
+ rtx clob = gen_rtx_CLOBBER (VOIDmode, gen_rtx_REG (Pmode, LR_REGNUM));
+ call = gen_rtx_PARALLEL (VOIDmode, gen_rtvec (2, call, clob));
+ }
+ call = emit_call_insn (call);
+
+ CALL_INSN_FUNCTION_USAGE (call) = use;
+}
+
+/* Worker for TARGET_FUNCTION_OK_FOR_SIBCALL.
+ Returns true if the function declared by DECL is ok for calling as a nested
+ function. */
+
+static bool
+or1k_function_ok_for_sibcall (tree decl, tree exp ATTRIBUTE_UNUSED)
+{
+ /* We can sibcall to any function if not PIC. */
+ if (!flag_pic)
+ return true;
+
+ /* We can sibcall any indirect function. */
+ if (decl == NULL)
+ return true;
+
+ /* If the call may go through the PLT, we need r16 live. */
+ return targetm.binds_local_p (decl);
+}
+
+#undef TARGET_FUNCTION_OK_FOR_SIBCALL
+#define TARGET_FUNCTION_OK_FOR_SIBCALL or1k_function_ok_for_sibcall
+
+/* Worker for TARGET_RTX_COSTS. */
+
+static bool
+or1k_rtx_costs (rtx x, machine_mode mode, int outer_code,
+ int opno ATTRIBUTE_UNUSED, int *total,
+ bool speed ATTRIBUTE_UNUSED)
+{
+ switch (GET_CODE (x))
+ {
+ case CONST_INT:
+ if (x == const0_rtx)
+ *total = 0;
+ else if ((outer_code == PLUS || outer_code == XOR || outer_code == MULT)
+ && satisfies_constraint_I (x))
+ *total = 0;
+ else if ((outer_code == AND || outer_code == IOR)
+ && satisfies_constraint_K (x))
+ *total = 0;
+ else if (satisfies_constraint_I (x)
+ || satisfies_constraint_K (x)
+ || satisfies_constraint_M (x))
+ *total = 2;
+ else
+ *total = COSTS_N_INSNS (2);
+ return true;
+
+ case CONST_DOUBLE:
+ *total = (x == CONST0_RTX (mode) ? 0 : COSTS_N_INSNS (2));
+ return true;
+
+ case HIGH:
+ /* This is effectively an 'M' constraint. */
+ *total = 2;
+ return true;
+
+ case LO_SUM:
+ /* This is effectively an 'I' constraint. */
+ *total = (outer_code == MEM ? 0 : 2);
+ return true;
+
+ case CONST:
+ case SYMBOL_REF:
+ case LABEL_REF:
+ if (outer_code == LO_SUM || outer_code == HIGH)
+ *total = 0;
+ else
+ {
+ /* ??? Extra cost for GOT or TLS symbols. */
+ *total = COSTS_N_INSNS (1 + (outer_code != MEM));
+ }
+ return true;
+
+ case PLUS:
+ if (outer_code == MEM)
+ *total = 0;
+ break;
+
+ default:
+ break;
+ }
+ return false;
+}
+
+#undef TARGET_RTX_COSTS
+#define TARGET_RTX_COSTS or1k_rtx_costs
+
+
+/* A subroutine of the atomic operation splitters. Jump to LABEL if
+ COND is true. Mark the jump as unlikely to be taken. */
+
+static void
+emit_unlikely_jump (rtx_code code, rtx label)
+{
+ rtx x;
+
+ x = gen_rtx_REG (BImode, SR_F_REGNUM);
+ x = gen_rtx_fmt_ee (code, VOIDmode, x, const0_rtx);
+ x = gen_rtx_IF_THEN_ELSE (VOIDmode, x, label, pc_rtx);
+ emit_jump_insn (gen_rtx_SET (pc_rtx, x));
+
+ // Disable this for now -- producing verify_cfg failures on probabilities.
+ // int very_unlikely = REG_BR_PROB_BASE / 100 - 1;
+ // add_int_reg_note (insn, REG_BR_PROB, very_unlikely);
+}
+
+/* A subroutine of the atomic operation splitters.
+ Emit a raw comparison for A CODE B. */
+
+static void
+emit_compare (rtx_code code, rtx a, rtx b)
+{
+ emit_insn (gen_rtx_SET (gen_rtx_REG (BImode, SR_F_REGNUM),
+ gen_rtx_fmt_ee (code, BImode, a, b)));
+}
+
+/* A subroutine of the atomic operation splitters.
+ Emit a load-locked instruction in MODE. */
+
+static void
+emit_load_locked (machine_mode mode, rtx reg, rtx mem)
+{
+ gcc_assert (mode == SImode);
+ emit_insn (gen_load_locked_si (reg, mem));
+}
+
+/* A subroutine of the atomic operation splitters.
+ Emit a store-conditional instruction in MODE. */
+
+static void
+emit_store_conditional (machine_mode mode, rtx mem, rtx val)
+{
+ gcc_assert (mode == SImode);
+ emit_insn (gen_store_conditional_si (mem, val));
+}
+
+/* A subroutine of the various atomic expanders. For sub-word operations,
+ we must adjust things to operate on SImode. Given the original MEM,
+ return a new aligned memory. Also build and return the quantities by
+ which to shift and mask. */
+
+static rtx
+or1k_adjust_atomic_subword (rtx orig_mem, rtx *pshift, rtx *pmask)
+{
+ rtx addr, align, shift, mask, mem;
+ machine_mode mode = GET_MODE (orig_mem);
+
+ addr = XEXP (orig_mem, 0);
+ addr = force_reg (Pmode, addr);
+
+ /* Aligned memory containing subword. Generate a new memory. We
+ do not want any of the existing MEM_ATTR data, as we're now
+ accessing memory outside the original object. */
+ align = expand_binop (Pmode, and_optab, addr, GEN_INT (-4),
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ mem = gen_rtx_MEM (SImode, align);
+ MEM_VOLATILE_P (mem) = MEM_VOLATILE_P (orig_mem);
+ if (MEM_ALIAS_SET (orig_mem) == ALIAS_SET_MEMORY_BARRIER)
+ set_mem_alias_set (mem, ALIAS_SET_MEMORY_BARRIER);
+
+ /* Shift amount for subword relative to aligned word. */
+ rtx mode_mask = GEN_INT (mode == QImode ? 3 : 2);
+ shift = expand_binop (SImode, and_optab, gen_lowpart (SImode, addr),
+ mode_mask, NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ if (BYTES_BIG_ENDIAN)
+ shift = expand_binop (SImode, xor_optab, shift, mode_mask,
+ shift, 1, OPTAB_LIB_WIDEN);
+ shift = expand_binop (SImode, ashl_optab, shift, GEN_INT (3),
+ shift, 1, OPTAB_LIB_WIDEN);
+ *pshift = shift;
+
+ /* Mask for insertion. */
+ mask = expand_binop (SImode, ashl_optab, GEN_INT (GET_MODE_MASK (mode)),
+ shift, NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ *pmask = mask;
+
+ return mem;
+}
+
+/* A subroutine of the various atomic expanders. For sub-word operations,
+ complete the operation by shifting result to the lsb of the SImode
+ temporary and then extracting the result in MODE with a SUBREG. */
+
+static void
+or1k_finish_atomic_subword (machine_mode mode, rtx o, rtx n, rtx shift)
+{
+ n = expand_binop (SImode, lshr_optab, n, shift,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ emit_move_insn (o, gen_lowpart (mode, n));
+}
+
+/* Expand an atomic compare and swap operation.
+ Emits the RTX to perform a compare and swap operation. This function takes
+ 8 RTX arguments in the OPERANDS array. The compare and swap operation
+ loads a value from memory (OPERANDS[2]) and compares it with an expected
+ value (OPERANDS[3]), if the values are equal it stores a new value
+ (OPERANDS[4]) to memory. The argument OPERANDS[0] represents a boolean
+ result which will be set to true if the operation succeeds. A return value
+ (OPERANDS[1]) will be set to what was loaded from memory. The argument
+ OPERAND[5] is used to indicate if the compare and swap is to be treated as
+ weak. OpenRISC does not use OPERANDS[5] or OPERANDS[6] which provide memory
+ model details.
+ For OpenRISC this emits RTX which will translate to assembly using the
+ 'l.lwa' (load word atomic) and 'l.swa' (store word atomic) instructions. */
+
+void
+or1k_expand_atomic_compare_and_swap (rtx operands[])
+{
+ rtx boolval, retval, mem, oldval, newval;
+ rtx label1, label2;
+ machine_mode mode;
+ bool is_weak;
+
+ boolval = operands[0];
+ retval = operands[1];
+ mem = operands[2];
+ oldval = operands[3];
+ newval = operands[4];
+ is_weak = (INTVAL (operands[5]) != 0);
+ mode = GET_MODE (mem);
+
+ if (reg_overlap_mentioned_p (retval, oldval))
+ oldval = copy_to_reg (oldval);
+
+ label1 = NULL_RTX;
+ /* If strong, create a label to try again. */
+ if (!is_weak)
+ {
+ label1 = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+ emit_label (XEXP (label1, 0));
+ }
+ label2 = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+
+ emit_load_locked (mode, retval, mem);
+ emit_compare (EQ, retval, oldval);
+ emit_unlikely_jump (EQ, label2);
+ emit_store_conditional (mode, mem, newval);
+
+ /* If strong, jump back to try again on fails. */
+ if (!is_weak)
+ emit_unlikely_jump (EQ, label1);
+ emit_label (XEXP (label2, 0));
+
+ /* In all cases, SR_F contains 1 on success, and 0 on failure. */
+ emit_insn (gen_sne_sr_f (boolval));
+}
+
+void
+or1k_expand_atomic_compare_and_swap_qihi (rtx operands[])
+{
+ rtx boolval, orig_retval, retval, scratch, mem, oldval, newval;
+ rtx label1, label2, mask, shift;
+ machine_mode mode;
+ bool is_weak;
+
+ boolval = operands[0];
+ orig_retval = operands[1];
+ mem = operands[2];
+ oldval = operands[3];
+ newval = operands[4];
+ is_weak = (INTVAL (operands[5]) != 0);
+ mode = GET_MODE (mem);
+
+ mem = or1k_adjust_atomic_subword (mem, &shift, &mask);
+
+ /* Shift and mask OLDVAL and NEWVAL into position with the word. */
+ if (oldval != const0_rtx)
+ {
+ oldval = convert_modes (SImode, mode, oldval, 1);
+ oldval = expand_binop (SImode, ashl_optab, oldval, shift,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ }
+ if (newval != const0_rtx)
+ {
+ newval = convert_modes (SImode, mode, newval, 1);
+ newval = expand_binop (SImode, ashl_optab, newval, shift,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ }
+
+ label1 = NULL_RTX;
+ if (!is_weak)
+ {
+ label1 = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+ emit_label (XEXP (label1, 0));
+ }
+ label2 = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+
+ scratch = gen_reg_rtx (SImode);
+ emit_load_locked (SImode, scratch, mem);
+
+ retval = expand_binop (SImode, and_optab, scratch, mask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ scratch = expand_binop (SImode, xor_optab, scratch, retval,
+ scratch, 1, OPTAB_LIB_WIDEN);
+
+ emit_compare (EQ, retval, oldval);
+ emit_unlikely_jump (EQ, label2);
+
+ if (newval != const0_rtx)
+ scratch = expand_binop (SImode, ior_optab, scratch, newval,
+ scratch, 1, OPTAB_LIB_WIDEN);
+
+ emit_store_conditional (SImode, mem, scratch);
+
+ if (!is_weak)
+ emit_unlikely_jump (EQ, label1);
+ emit_label (XEXP (label2, 0));
+
+ or1k_finish_atomic_subword (mode, orig_retval, retval, shift);
+
+ /* In all cases, SR_F contains 1 on success, and 0 on failure. */
+ emit_insn (gen_sne_sr_f (boolval));
+}
+
+/* Expand an atomic exchange operation.
+ Emits the RTX to perform an exchange operation. This function takes 4 RTX
+ arguments in the OPERANDS array. The exchange operation atomically loads a
+ value from memory (OPERANDS[1]) to a return value (OPERANDS[0]) and stores a
+ new value (OPERANDS[2]) back to the memory location.
+ Another argument (OPERANDS[3]) is used to indicate the memory model and
+ is not used by OpenRISC.
+ For OpenRISC this emits RTX which will translate to assembly using the
+ 'l.lwa' (load word atomic) and 'l.swa' (store word atomic) instructions. */
+
+void
+or1k_expand_atomic_exchange (rtx operands[])
+{
+ rtx retval, mem, val, label;
+ machine_mode mode;
+
+ retval = operands[0];
+ mem = operands[1];
+ val = operands[2];
+ mode = GET_MODE (mem);
+
+ if (reg_overlap_mentioned_p (retval, val))
+ val = copy_to_reg (val);
+
+ label = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+ emit_label (XEXP (label, 0));
+
+ emit_load_locked (mode, retval, mem);
+ emit_store_conditional (mode, mem, val);
+ emit_unlikely_jump (EQ, label);
+}
+
+void
+or1k_expand_atomic_exchange_qihi (rtx operands[])
+{
+ rtx orig_retval, retval, mem, val, scratch;
+ rtx label, mask, shift;
+ machine_mode mode;
+
+ orig_retval = operands[0];
+ mem = operands[1];
+ val = operands[2];
+ mode = GET_MODE (mem);
+
+ mem = or1k_adjust_atomic_subword (mem, &shift, &mask);
+
+ /* Shift and mask VAL into position with the word. */
+ if (val != const0_rtx)
+ {
+ val = convert_modes (SImode, mode, val, 1);
+ val = expand_binop (SImode, ashl_optab, val, shift,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ }
+
+ label = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+ emit_label (XEXP (label, 0));
+
+ scratch = gen_reg_rtx (SImode);
+ emit_load_locked (SImode, scratch, mem);
+
+ retval = expand_binop (SImode, and_optab, scratch, mask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ scratch = expand_binop (SImode, xor_optab, scratch, retval,
+ scratch, 1, OPTAB_LIB_WIDEN);
+ if (val != const0_rtx)
+ scratch = expand_binop (SImode, ior_optab, scratch, val,
+ scratch, 1, OPTAB_LIB_WIDEN);
+
+ emit_store_conditional (SImode, mem, scratch);
+ emit_unlikely_jump (EQ, label);
+
+ or1k_finish_atomic_subword (mode, orig_retval, retval, shift);
+}
+
+/* Expand an atomic fetch-and-operate pattern. CODE is the binary operation
+ to perform (with MULT as a stand-in for NAND). MEM is the memory on which
+ to operate. VAL is the second operand of the binary operator. BEFORE and
+ AFTER are optional locations to return the value of MEM either before of
+ after the operation. */
+
+void
+or1k_expand_atomic_op (rtx_code code, rtx mem, rtx val,
+ rtx orig_before, rtx orig_after)
+{
+ machine_mode mode = GET_MODE (mem);
+ rtx before = orig_before, after = orig_after;
+ rtx label;
+
+ label = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+ emit_label (XEXP (label, 0));
+
+ if (before == NULL_RTX)
+ before = gen_reg_rtx (mode);
+
+ emit_load_locked (mode, before, mem);
+
+ if (code == MULT)
+ {
+ after = expand_binop (mode, and_optab, before, val,
+ after, 1, OPTAB_LIB_WIDEN);
+ after = expand_unop (mode, one_cmpl_optab, after, after, 1);
+ }
+ else
+ after = expand_simple_binop (mode, code, before, val,
+ after, 1, OPTAB_LIB_WIDEN);
+
+ emit_store_conditional (mode, mem, after);
+ emit_unlikely_jump (EQ, label);
+
+ if (orig_before)
+ emit_move_insn (orig_before, before);
+ if (orig_after)
+ emit_move_insn (orig_after, after);
+}
+
+void
+or1k_expand_atomic_op_qihi (rtx_code code, rtx mem, rtx val,
+ rtx orig_before, rtx orig_after)
+{
+ machine_mode mode = GET_MODE (mem);
+ rtx label, mask, shift, x;
+ rtx before, after, scratch;
+
+ mem = or1k_adjust_atomic_subword (mem, &shift, &mask);
+
+ /* Shift and mask VAL into position with the word. */
+ val = convert_modes (SImode, mode, val, 1);
+ val = expand_binop (SImode, ashl_optab, val, shift,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+
+ switch (code)
+ {
+ case IOR:
+ case XOR:
+ /* We've already zero-extended VAL. That is sufficient to
+ make certain that it does not affect other bits. */
+ break;
+
+ case AND:
+ case MULT: /* NAND */
+ /* If we make certain that all of the other bits in VAL are
+ set, that will be sufficient to not affect other bits. */
+ x = expand_unop (SImode, one_cmpl_optab, mask, NULL_RTX, 1);
+ val = expand_binop (SImode, ior_optab, val, x,
+ val, 1, OPTAB_LIB_WIDEN);
+ break;
+
+ case PLUS:
+ case MINUS:
+ /* These will all affect bits outside the field and need
+ adjustment via MASK within the loop. */
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+
+ label = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+ emit_label (XEXP (label, 0));
+
+ before = scratch = gen_reg_rtx (SImode);
+ emit_load_locked (SImode, before, mem);
+
+ switch (code)
+ {
+ case IOR:
+ case XOR:
+ case AND:
+ after = expand_simple_binop (SImode, code, before, val,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ scratch = after;
+ break;
+
+ case PLUS:
+ case MINUS:
+ before = expand_binop (SImode, and_optab, scratch, mask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ scratch = expand_binop (SImode, xor_optab, scratch, before,
+ scratch, 1, OPTAB_LIB_WIDEN);
+ after = expand_simple_binop (SImode, code, before, val,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ after = expand_binop (SImode, and_optab, after, mask,
+ after, 1, OPTAB_LIB_WIDEN);
+ scratch = expand_binop (SImode, ior_optab, scratch, after,
+ scratch, 1, OPTAB_LIB_WIDEN);
+ break;
+
+ case MULT: /* NAND */
+ after = expand_binop (SImode, and_optab, before, val,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ after = expand_binop (SImode, xor_optab, after, mask,
+ after, 1, OPTAB_LIB_WIDEN);
+ scratch = after;
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+
+ emit_store_conditional (SImode, mem, scratch);
+ emit_unlikely_jump (EQ, label);
+
+ if (orig_before)
+ or1k_finish_atomic_subword (mode, orig_before, before, shift);
+ if (orig_after)
+ or1k_finish_atomic_subword (mode, orig_after, after, shift);
+}
+
+/* Worker for TARGET_ASM_OUTPUT_MI_THUNK.
+ Output the assembler code for a thunk function. THUNK_DECL is the
+ declaration for the thunk function itself, FUNCTION is the decl for
+ the target function. DELTA is an immediate constant offset to be
+ added to THIS. If VCALL_OFFSET is nonzero, the word at address
+ (*THIS + VCALL_OFFSET) should be additionally added to THIS. */
+
+static void
+or1k_output_mi_thunk (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED,
+ HOST_WIDE_INT delta, HOST_WIDE_INT vcall_offset,
+ tree function)
+{
+ rtx this_rtx, funexp;
+ rtx_insn *insn;
+
+ reload_completed = 1;
+ epilogue_completed = 1;
+
+ emit_note (NOTE_INSN_PROLOGUE_END);
+
+ /* Find the "this" pointer. Normally in r3, but if the function
+ returns a structure, the structure return pointer is in r3 and
+ the "this" pointer is in r4 instead. */
+ if (aggregate_value_p (TREE_TYPE (TREE_TYPE (function)), function))
+ this_rtx = gen_rtx_REG (Pmode, 4);
+ else
+ this_rtx = gen_rtx_REG (Pmode, 3);
+
+ /* Add DELTA. When possible use a plain add, otherwise load it
+ into a register first. */
+ if (delta)
+ {
+ rtx delta_rtx = GEN_INT (delta);
+
+ if (!satisfies_constraint_I (delta_rtx))
+ {
+ rtx scratch = gen_rtx_REG (Pmode, PE_TMP_REGNUM);
+ emit_move_insn (scratch, delta_rtx);
+ delta_rtx = scratch;
+ }
+
+ /* THIS_RTX += DELTA. */
+ emit_insn (gen_add2_insn (this_rtx, delta_rtx));
+ }
+
+ /* Add the word at address (*THIS_RTX + VCALL_OFFSET). */
+ if (vcall_offset)
+ {
+ rtx scratch = gen_rtx_REG (Pmode, PE_TMP_REGNUM);
+ HOST_WIDE_INT lo = sext_hwi(vcall_offset, 16);
+ HOST_WIDE_INT hi = vcall_offset - lo;
+ rtx tmp;
+
+ /* SCRATCH = *THIS_RTX. */
+ tmp = gen_rtx_MEM (Pmode, this_rtx);
+ emit_move_insn (scratch, tmp);
+
+ if (hi != 0)
+ {
+ rtx scratch2 = gen_rtx_REG (Pmode, RV_REGNUM);
+ emit_move_insn (scratch2, GEN_INT (hi));
+ emit_insn (gen_add2_insn (scratch, scratch2));
+ }
+
+ /* SCRATCH = *(*THIS_RTX + VCALL_OFFSET). */
+ tmp = plus_constant (Pmode, scratch, lo);
+ tmp = gen_rtx_MEM (Pmode, tmp);
+ emit_move_insn (scratch, tmp);
+
+ /* THIS_RTX += *(*THIS_RTX + VCALL_OFFSET). */
+ emit_insn (gen_add2_insn (this_rtx, scratch));
+ }
+
+ /* Generate a tail call to the target function. */
+ if (! TREE_USED (function))
+ {
+ assemble_external (function);
+ TREE_USED (function) = 1;
+ }
+ funexp = XEXP (DECL_RTL (function), 0);
+
+ /* The symbol will be a local alias and therefore always binds local. */
+ gcc_assert (SYMBOL_REF_LOCAL_P (funexp));
+
+ funexp = gen_rtx_MEM (FUNCTION_MODE, funexp);
+ insn = emit_call_insn (gen_sibcall (funexp, const0_rtx));
+ SIBLING_CALL_P (insn) = 1;
+ emit_barrier ();
+
+ /* Run just enough of rest_of_compilation to get the insns emitted.
+ There's not really enough bulk here to make other passes such as
+ instruction scheduling worth while. Note that use_thunk calls
+ assemble_start_function and assemble_end_function. */
+ insn = get_insns ();
+ shorten_branches (insn);
+ final_start_function (insn, file, 1);
+ final (insn, file, 1);
+ final_end_function ();
+
+ reload_completed = 0;
+ epilogue_completed = 0;
+}
+
+#undef TARGET_ASM_OUTPUT_MI_THUNK
+#define TARGET_ASM_OUTPUT_MI_THUNK or1k_output_mi_thunk
+#undef TARGET_ASM_CAN_OUTPUT_MI_THUNK
+#define TARGET_ASM_CAN_OUTPUT_MI_THUNK \
+ hook_bool_const_tree_hwi_hwi_const_tree_true
+
+#undef TARGET_OPTION_OVERRIDE
+#define TARGET_OPTION_OVERRIDE or1k_option_override
+
+#undef TARGET_COMPUTE_FRAME_LAYOUT
+#define TARGET_COMPUTE_FRAME_LAYOUT or1k_compute_frame_layout
+
+#undef TARGET_LEGITIMATE_ADDRESS_P
+#define TARGET_LEGITIMATE_ADDRESS_P or1k_legitimate_address_p
+
+#undef TARGET_HAVE_TLS
+#define TARGET_HAVE_TLS true
+
+#undef TARGET_HAVE_SPECULATION_SAFE_VALUE
+#define TARGET_HAVE_SPECULATION_SAFE_VALUE speculation_safe_value_not_needed
+
+/* Calling Conventions. */
+#undef TARGET_FUNCTION_VALUE
+#define TARGET_FUNCTION_VALUE or1k_function_value
+#undef TARGET_LIBCALL_VALUE
+#define TARGET_LIBCALL_VALUE or1k_libcall_value
+#undef TARGET_FUNCTION_VALUE_REGNO_P
+#define TARGET_FUNCTION_VALUE_REGNO_P or1k_function_value_regno_p
+#undef TARGET_FUNCTION_ARG
+#define TARGET_FUNCTION_ARG or1k_function_arg
+#undef TARGET_FUNCTION_ARG_ADVANCE
+#define TARGET_FUNCTION_ARG_ADVANCE or1k_function_arg_advance
+#undef TARGET_RETURN_IN_MEMORY
+#define TARGET_RETURN_IN_MEMORY or1k_return_in_memory
+#undef TARGET_PASS_BY_REFERENCE
+#define TARGET_PASS_BY_REFERENCE or1k_pass_by_reference
+#undef TARGET_TRAMPOLINE_INIT
+#define TARGET_TRAMPOLINE_INIT or1k_trampoline_init
+#undef TARGET_FRAME_POINTER_REQUIRED
+#define TARGET_FRAME_POINTER_REQUIRED or1k_frame_pointer_required
+#undef TARGET_CUSTOM_FUNCTION_DESCRIPTORS
+#define TARGET_CUSTOM_FUNCTION_DESCRIPTORS 1
+
+/* Assembly generation. */
+#undef TARGET_PRINT_OPERAND
+#define TARGET_PRINT_OPERAND or1k_print_operand
+#undef TARGET_PRINT_OPERAND_ADDRESS
+#define TARGET_PRINT_OPERAND_ADDRESS or1k_print_operand_address
+
+/* Section anchor support. */
+#undef TARGET_MIN_ANCHOR_OFFSET
+#define TARGET_MIN_ANCHOR_OFFSET -32768
+#undef TARGET_MAX_ANCHOR_OFFSET
+#define TARGET_MAX_ANCHOR_OFFSET 32767
+
+struct gcc_target targetm = TARGET_INITIALIZER;
+
+#include "gt-or1k.h"
diff --git a/gcc/config/or1k/or1k.h b/gcc/config/or1k/or1k.h
new file mode 100644
index 00000000000..90a7c96cefa
--- /dev/null
+++ b/gcc/config/or1k/or1k.h
@@ -0,0 +1,392 @@
+/* Target Definitions for OpenRISC.
+ Copyright (C) 2018 Free Software Foundation, Inc.
+ Contributed by Stafford Horne.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+#ifndef GCC_OR1K_H
+#define GCC_OR1K_H
+
+/* Names to predefine in the preprocessor for this target machine. */
+#define TARGET_CPU_CPP_BUILTINS() \
+ do \
+ { \
+ builtin_define ("__OR1K__"); \
+ builtin_define ("__OR1K_DELAY__"); \
+ builtin_define ("__or1k__"); \
+ if (TARGET_CMOV) \
+ builtin_define ("__or1k_cmov__"); \
+ builtin_assert ("cpu=or1k"); \
+ builtin_assert ("machine=or1k"); \
+ } \
+ while (0)
+
+/* Storage layout. */
+
+#define DEFAULT_SIGNED_CHAR 1
+#define BITS_BIG_ENDIAN 0
+#define BYTES_BIG_ENDIAN 1
+#define WORDS_BIG_ENDIAN 1
+#define BITS_PER_WORD 32
+#define UNITS_PER_WORD 4
+#define POINTER_SIZE 32
+#define BIGGEST_ALIGNMENT 32
+#define STRICT_ALIGNMENT 1
+#define FUNCTION_BOUNDARY 32
+#define PARM_BOUNDARY 32
+#define STACK_BOUNDARY 32
+#define PREFERRED_STACK_BOUNDARY 32
+#define MAX_FIXED_MODE_SIZE 64
+
+/* Layout of source language data types. */
+
+#define INT_TYPE_SIZE 32
+#define SHORT_TYPE_SIZE 16
+#define LONG_TYPE_SIZE 32
+#define LONG_LONG_TYPE_SIZE 64
+#define FLOAT_TYPE_SIZE 32
+#define DOUBLE_TYPE_SIZE 64
+#define LONG_DOUBLE_TYPE_SIZE 64
+#define WCHAR_TYPE_SIZE 32
+
+#undef SIZE_TYPE
+#define SIZE_TYPE "unsigned int"
+
+#undef PTRDIFF_TYPE
+#define PTRDIFF_TYPE "int"
+
+#undef WCHAR_TYPE
+#define WCHAR_TYPE "unsigned int"
+
+/* Describing Relative Costs of Operations. */
+#define MOVE_MAX 4
+#define SLOW_BYTE_ACCESS 1
+
+/* Register usage, class and contents. */
+
+/* In OpenRISC there are 32 general purpose registers with the following
+ designations:
+
+ r0 always 0
+ r1 stack pointer
+ r2 frame pointer (optional)
+ r3 arg 0
+ r4 arg 1
+ r5 arg 2
+ r6 arg 3
+ r7 arg 4
+ r8 arg 5
+ r9 function call return link address
+ r10 thread local storage
+ r11 function return value & static chain
+ r12 function return value high (upper 64-bit)
+ r13 temporary (used in prologue and epilogue)
+ r14 callee saved
+ r15 temporary
+ r16 callee saved & pic base register
+ r17 temporary
+ r18 callee saved
+ r19 temporary
+ r20 callee saved
+ r21 temporary
+ r22 callee saved
+ r23 temporary
+ r24 callee saved
+ r25 temporary
+ r26 callee saved
+ r27 temporary
+ r28 callee saved
+ r29 temporary
+ r30 callee saved
+ r31 temporary
+
+ r32 soft argument pointer
+ r33 soft frame pointer
+ r34 SR[F] (bit) register
+
+ This ABI has no adjacent call-saved register, which means that
+ DImode/DFmode pseudos cannot be call-saved and will always be
+ spilled across calls. To solve this without changing the ABI,
+ remap the compiler internal register numbers to place the even
+ call-saved registers r16-r30 in 24-31, and the odd call-clobbered
+ registers r17-r31 in 16-23. */
+
+#define FIRST_PSEUDO_REGISTER 35
+
+#define HW_TO_GCC_REGNO(X) \
+ ((X) < 16 || (X) > 31 ? (X) \
+ : (X) & 1 ? ((X) - 16) / 2 + 16 \
+ : ((X) - 16) / 2 + 24)
+
+#define GCC_TO_HW_REGNO(X) \
+ ((X) < 16 || (X) > 31 ? (X) \
+ : (X) < 24 ? ((X) - 16) * 2 + 17 \
+ : ((X) - 24) * 2 + 16)
+
+#define DBX_REGISTER_NUMBER(X) GCC_TO_HW_REGNO(X)
+
+#define REGISTER_NAMES { \
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
+ "r17", "r19", "r21", "r23", "r25", "r27", "r29", "r31", \
+ "r16", "r18", "r20", "r22", "r24", "r26", "r28", "r30", \
+ "?ap", "?fp", "?sr_f" }
+
+#define FIXED_REGISTERS \
+{ 1, 1, 0, 0, 0, 0, 0, 0, \
+ 0, 0, 1, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
+ 1, 1, 1 }
+
+/* Caller saved/temporary registers + args + fixed */
+#define CALL_USED_REGISTERS \
+{ 1, 1, 0, 1, 1, 1, 1, 1, \
+ 1, 1, 1, 1, 1, 1, 0, 1, \
+ 1, 1, 1, 1, 1, 1, 1, 1, \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
+ 1, 1, 1 }
+
+/* List the order in which to allocate registers. Each register must
+ be listed once, even those in FIXED_REGISTERS.
+
+ ??? Note that placing REAL_PIC_OFFSET_TABLE_REGNUM (r16 = 24) first
+ happens to make it most likely selected *as* the pic register when
+ compiling without optimization, simply because the pic pseudo happens
+ to be allocated with the lowest pseudo regno. */
+
+#define REG_ALLOC_ORDER { \
+ 16, 17, 18, 19, 20, 21, 22, 23, /* r17-r31 (odd), non-saved */ \
+ 13, 15, /* non-saved */ \
+ 12, 11, /* non-saved return values */ \
+ 8, 7, 6, 5, 4, 3, /* non-saved argument regs */ \
+ 24, /* r16, saved, pic reg */ \
+ 25, 26, 27, 28, 29, 30, 31, /* r18-r31 (even), saved */ \
+ 14, /* r14, saved */ \
+ 2, /* saved hard frame pointer */ \
+ 9, /* saved return address */ \
+ 0, /* fixed zero reg */ \
+ 1, /* fixed stack pointer */ \
+ 10, /* fixed thread pointer */ \
+ 32, 33, 34, /* fixed ap, fp, sr[f], */ \
+}
+
+enum reg_class
+{
+ NO_REGS,
+ SIBCALL_REGS,
+ GENERAL_REGS,
+ FLAG_REGS,
+ ALL_REGS,
+ LIM_REG_CLASSES
+};
+
+#define N_REG_CLASSES (int) LIM_REG_CLASSES
+
+#define REG_CLASS_NAMES { \
+ "NO_REGS", \
+ "SIBCALL_REGS", \
+ "GENERAL_REGS", \
+ "FLAG_REGS", \
+ "ALL_REGS" }
+
+/* The SIBCALL_REGS must be call-clobbered, and not used as a temporary
+ in the epilogue. This excludes R9 (LR), R11 (STATIC_CHAIN), and
+ R13 (PE_TMP_REGNUM). */
+#define SIBCALL_REGS_MASK 0x00ff95f8u
+
+#define REG_CLASS_CONTENTS \
+{ { 0x00000000, 0x00000000 }, \
+ { SIBCALL_REGS_MASK, 0 }, \
+ { 0xffffffff, 0x00000003 }, \
+ { 0x00000000, 0x00000004 }, \
+ { 0xffffffff, 0x00000007 } \
+}
+
+/* A C expression whose value is a register class containing hard
+ register REGNO. In general there is more that one such class;
+ choose a class which is "minimal", meaning that no smaller class
+ also contains the register. */
+#define REGNO_REG_CLASS(REGNO) \
+ ((REGNO) >= SR_F_REGNUM ? FLAG_REGS \
+ : (REGNO) < 32 && ((SIBCALL_REGS_MASK >> (REGNO)) & 1) ? SIBCALL_REGS \
+ : GENERAL_REGS)
+
+#define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \
+do { \
+ if (GET_MODE_CLASS (MODE) == MODE_INT \
+ && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
+ (MODE) = word_mode; \
+} while (0)
+
+/* A macro whose definition is the name of the class to which a valid
+ base register must belong. A base register is one used in an
+ address which is the register value plus a displacement. */
+#define BASE_REG_CLASS GENERAL_REGS
+
+#define INDEX_REG_CLASS NO_REGS
+
+/* Assembly definitions. */
+
+#define ASM_APP_ON ""
+#define ASM_APP_OFF ""
+
+#define ASM_COMMENT_START "# "
+
+#define GLOBAL_ASM_OP "\t.global\t"
+#define TEXT_SECTION_ASM_OP "\t.section\t.text"
+#define DATA_SECTION_ASM_OP "\t.section\t.data"
+#define BSS_SECTION_ASM_OP "\t.section\t.bss"
+#define SBSS_SECTION_ASM_OP "\t.section\t.sbss"
+
+/* This is how to output an assembler line
+ that says to advance the location counter
+ to a multiple of 2**LOG bytes. */
+#define ASM_OUTPUT_ALIGN(FILE,LOG) \
+ do \
+ { \
+ if ((LOG) != 0) \
+ fprintf (FILE, "\t.align %d\n", 1 << (LOG)); \
+ } \
+ while (0)
+
+/* This is used in crtstuff to create call stubs in the
+ _init() and _fini() functions. Defining this here saves
+ a few bytes created by the dummy call_xxx() functions. */
+#define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC) \
+ asm (SECTION_OP "\n" \
+" l.jal " #FUNC "\n" \
+" l.nop\n" \
+" .previous");
+
+
+#define PRINT_OPERAND_PUNCT_VALID_P(CODE) (code == '#')
+
+/* Calling convention definitions. */
+#define CUMULATIVE_ARGS int
+#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
+ do { (CUM) = 0; } while (0)
+
+
+/* Trampolines, for nested functions */
+#define TRAMPOLINE_SIZE 20
+#define TRAMPOLINE_ALIGNMENT 32
+
+/* Pointer mode */
+#define Pmode SImode
+#define FUNCTION_MODE SImode
+#define STACK_POINTER_REGNUM SP_REGNUM
+#define FRAME_POINTER_REGNUM SFP_REGNUM
+#define HARD_FRAME_POINTER_REGNUM HFP_REGNUM
+#define STATIC_CHAIN_REGNUM RV_REGNUM
+
+/* The register number of the arg pointer register, which is used to
+ access the function's argument list. */
+#define ARG_POINTER_REGNUM AP_REGNUM
+
+/* Position Independent Code. See or1k_init_pic_reg. */
+#define REAL_PIC_OFFSET_TABLE_REGNUM HW_TO_GCC_REGNO (16)
+
+/* ??? Follow i386 in working around gimple costing estimation, which
+ happens without properly initializing the pic_offset_table pseudo. */
+#define PIC_OFFSET_TABLE_REGNUM \
+ (pic_offset_table_rtx ? INVALID_REGNUM : REAL_PIC_OFFSET_TABLE_REGNUM)
+
+/* A C expression that is nonzero if REGNO is the number of a hard
+ register in which function arguments are sometimes passed. */
+#define FUNCTION_ARG_REGNO_P(r) (r >= 3 && r <= 8)
+
+#define MAX_REGS_PER_ADDRESS 1
+
+/* The ELIMINABLE_REGS macro specifies a table of register pairs used to
+ eliminate unneeded registers that point into the stack frame. Note,
+ the only elimination attempted by the compiler is to replace references
+ to the frame pointer with references to the stack pointer. */
+
+#define ELIMINABLE_REGS \
+{{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }, \
+ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM }, \
+ { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \
+ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM }}
+
+#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
+ do { \
+ (OFFSET) = or1k_initial_elimination_offset ((FROM), (TO)); \
+ } while (0)
+
+#define REGNO_OK_FOR_INDEX_P(REGNO) 0
+#define REGNO_OK_FOR_BASE_P(REGNO) ((REGNO) <= SFP_REGNUM)
+
+/* If defined, the maximum amount of space required for outgoing
+ arguments will be computed and placed into the variable
+ 'crtl->outgoing_args_size'. No space will be pushed
+ onto the stack for each call; instead, the function prologue
+ should increase the stack frame size by this amount. */
+#define ACCUMULATE_OUTGOING_ARGS 1
+
+/* Stack layout and stack pointer usage. */
+
+/* This plus ARG_POINTER_REGNUM points to the first word of incoming args. */
+#define FIRST_PARM_OFFSET(FNDECL) (0)
+
+/* This plus STACK_POINTER_REGNUM points to the first work of outgoing args. */
+#define STACK_POINTER_OFFSET (0)
+
+/* Define this macro if pushing a word onto the stack moves the stack
+ pointer to a smaller address. */
+#define STACK_GROWS_DOWNWARD 1
+
+#define FRAME_GROWS_DOWNWARD 1
+
+/* An alias for a machine mode name. This is the machine mode that
+ elements of a jump-table should have. */
+#define CASE_VECTOR_MODE SImode
+
+#define STORE_FLAG_VALUE 1
+
+/* Indicates how loads of narrow mode values are loaded into words. */
+#define LOAD_EXTEND_OP(MODE) (ZERO_EXTEND)
+
+/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
+ the stack pointer does not matter. */
+#define EXIT_IGNORE_STACK 1
+
+/* Macros related to the access of the stack frame chain. */
+#define INITIAL_FRAME_ADDRESS_RTX or1k_initial_frame_addr ()
+#define DYNAMIC_CHAIN_ADDRESS or1k_dynamic_chain_addr
+#define RETURN_ADDR_RTX or1k_return_addr
+
+/* Always pass the SYMBOL_REF for direct calls to the expanders. */
+#define NO_FUNCTION_CSE 1
+
+/* Profiling */
+#define FUNCTION_PROFILER(FILE,LABELNO) (abort (), 0)
+
+/* Dwarf 2 Support */
+#define DWARF2_DEBUGGING_INFO 1
+#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LR_REGNUM)
+#define DWARF_FRAME_RETURN_COLUMN LR_REGNUM
+
+/* Describe how we implement __builtin_eh_return. */
+#define EH_RETURN_REGNUM HW_TO_GCC_REGNO (23)
+/* Use r25, r27, r29 and r31 (clobber regs) for exception data.
+ Recall that these are remapped consecutively. */
+#define EH_RETURN_DATA_REGNO(N) \
+ ((N) < 4 ? HW_TO_GCC_REGNO (25) + (N) : INVALID_REGNUM)
+#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, EH_RETURN_REGNUM)
+
+#endif /* GCC_OR1K_H */
diff --git a/gcc/config/or1k/or1k.md b/gcc/config/or1k/or1k.md
new file mode 100644
index 00000000000..48c40228af0
--- /dev/null
+++ b/gcc/config/or1k/or1k.md
@@ -0,0 +1,907 @@
+;; Machine description for OpenRISC
+;; Copyright (C) 2018 Free Software Foundation, Inc.
+;; Contributed by Stafford Horne
+
+;; This file is part of GCC.
+
+;; GCC is free software; you can redistribute it and/or modify it
+;; under the terms of the GNU General Public License as published
+;; by the Free Software Foundation; either version 3, or (at your
+;; option) any later version.
+
+;; GCC is distributed in the hope that it will be useful, but WITHOUT
+;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+;; License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+;; -------------------------------------------------------------------------
+;; OpenRISC specific constraints, predicates and attributes
+;; -------------------------------------------------------------------------
+
+(include "constraints.md")
+(include "predicates.md")
+
+;; Register numbers
+(define_constants
+ [(SP_REGNUM 1)
+ (HFP_REGNUM 2)
+ (LR_REGNUM 9)
+ (TLS_REGNUM 10)
+ (RV_REGNUM 11)
+ (PE_TMP_REGNUM 13)
+ (AP_REGNUM 32)
+ (SFP_REGNUM 33)
+ (SR_F_REGNUM 34)]
+)
+
+(define_c_enum "unspec" [
+ UNSPEC_SET_GOT
+ UNSPEC_GOT
+ UNSPEC_GOTOFF
+ UNSPEC_TPOFF
+ UNSPEC_GOTTPOFF
+ UNSPEC_TLSGD
+ UNSPEC_MSYNC
+])
+
+(define_c_enum "unspecv" [
+ UNSPECV_SET_GOT
+ UNSPECV_LL
+ UNSPECV_SC
+])
+
+;; Instruction scheduler
+
+; Most instructions are 4 bytes long.
+(define_attr "length" "" (const_int 4))
+
+(define_attr "type"
+ "alu,st,ld,control,multi"
+ (const_string "alu"))
+
+(define_attr "insn_support" "class1,sext,sfimm,shftimm" (const_string "class1"))
+
+(define_attr "enabled" ""
+ (cond [(eq_attr "insn_support" "class1") (const_int 1)
+ (and (eq_attr "insn_support" "sext")
+ (ne (symbol_ref "TARGET_SEXT") (const_int 0))) (const_int 1)
+ (and (eq_attr "insn_support" "sfimm")
+ (ne (symbol_ref "TARGET_SFIMM") (const_int 0))) (const_int 1)
+ (and (eq_attr "insn_support" "shftimm")
+ (ne (symbol_ref "TARGET_SHFTIMM") (const_int 0))) (const_int 1)]
+ (const_int 0)))
+
+;; Describe a user's asm statement.
+(define_asm_attributes
+ [(set_attr "type" "multi")])
+
+(define_automaton "or1k")
+(define_cpu_unit "cpu" "or1k")
+(define_insn_reservation "alu" 1
+ (eq_attr "type" "alu")
+ "cpu")
+(define_insn_reservation "st" 1
+ (eq_attr "type" "st")
+ "cpu")
+(define_insn_reservation "ld" 3
+ (eq_attr "type" "st")
+ "cpu")
+(define_insn_reservation "control" 1
+ (eq_attr "type" "control")
+ "cpu")
+
+; Define delay slots for any branch
+(define_delay (eq_attr "type" "control")
+ [(eq_attr "type" "alu,st,ld") (nil) (nil)])
+
+;; -------------------------------------------------------------------------
+;; nop instruction
+;; -------------------------------------------------------------------------
+
+(define_insn "nop"
+ [(const_int 0)]
+ ""
+ "l.nop")
+
+;; -------------------------------------------------------------------------
+;; Arithmetic instructions
+;; -------------------------------------------------------------------------
+
+(define_insn "addsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (plus:SI
+ (match_operand:SI 1 "register_operand" "%r,r")
+ (match_operand:SI 2 "reg_or_s16_operand" " r,I")))]
+ ""
+ "@
+ l.add\t%0, %1, %2
+ l.addi\t%0, %1, %2")
+
+(define_insn "mulsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (mult:SI
+ (match_operand:SI 1 "register_operand" "%r,r")
+ (match_operand:SI 2 "reg_or_s16_operand" " r,I")))]
+ "!TARGET_SOFT_MUL"
+ "@
+ l.mul\t%0, %1, %2
+ l.muli\t%0, %1, %2")
+
+(define_insn "divsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (div:SI
+ (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "register_operand" "r")))]
+ "!TARGET_SOFT_DIV"
+ "l.div\t%0, %1, %2")
+
+(define_insn "udivsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (udiv:SI
+ (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "register_operand" "r")))]
+ "!TARGET_SOFT_DIV"
+ "l.divu\t%0, %1, %2")
+
+(define_insn "subsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (minus:SI
+ (match_operand:SI 1 "reg_or_0_operand" "rO")
+ (match_operand:SI 2 "register_operand" "r")))]
+ ""
+ "l.sub\t%0, %r1, %2")
+
+;; -------------------------------------------------------------------------
+;; Logical operators
+;; -------------------------------------------------------------------------
+
+(define_code_iterator SHIFT [ashift ashiftrt lshiftrt])
+(define_code_attr shift_op [(ashift "ashl") (ashiftrt "ashr")
+ (lshiftrt "lshr")])
+(define_code_attr shift_asm [(ashift "sll") (ashiftrt "sra")
+ (lshiftrt "srl")])
+
+(define_insn "<shift_op>si3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (SHIFT:SI (match_operand:SI 1 "register_operand" "r,r")
+ (match_operand:SI 2 "reg_or_u6_operand" "r,n")))]
+ ""
+ "@
+ l.<shift_asm>\t%0, %1, %2
+ l.<shift_asm>i\t%0, %1, %2"
+ [(set_attr "insn_support" "*,shftimm")])
+
+(define_insn "rotrsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (rotatert:SI (match_operand:SI 1 "register_operand" "r,r")
+ (match_operand:SI 2 "reg_or_u6_operand" "r,n")))]
+ "TARGET_ROR"
+ "@
+ l.ror\t%0, %1, %2
+ l.rori\t%0, %1, %2"
+ [(set_attr "insn_support" "*,shftimm")])
+
+(define_insn "andsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (and:SI
+ (match_operand:SI 1 "register_operand" "%r,r")
+ (match_operand:SI 2 "reg_or_u16_operand" " r,K")))]
+ ""
+ "@
+ l.and\t%0, %1, %2
+ l.andi\t%0, %1, %2")
+
+(define_insn "xorsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (xor:SI
+ (match_operand:SI 1 "register_operand" "%r,r")
+ (match_operand:SI 2 "reg_or_s16_operand" " r,I")))]
+ ""
+ "@
+ l.xor\t%0, %1, %2
+ l.xori\t%0, %1, %2")
+
+(define_insn "iorsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (ior:SI
+ (match_operand:SI 1 "register_operand" "%r,r")
+ (match_operand:SI 2 "reg_or_u16_operand" " r,K")))]
+ ""
+ "@
+ l.or\t%0, %1, %2
+ l.ori\t%0, %1, %2")
+
+(define_expand "one_cmplsi2"
+ [(set (match_operand:SI 0 "register_operand" "")
+ (xor:SI (match_operand:SI 1 "register_operand" "") (const_int -1)))]
+ ""
+ "")
+
+;; -------------------------------------------------------------------------
+;; Move instructions
+;; -------------------------------------------------------------------------
+
+(define_mode_iterator I [QI HI SI])
+(define_mode_iterator I12 [QI HI])
+
+(define_mode_attr ldst [(QI "b") (HI "h") (SI "w")])
+
+(define_expand "mov<I:mode>"
+ [(set (match_operand:I 0 "nonimmediate_operand" "")
+ (match_operand:I 1 "general_operand" ""))]
+ ""
+{
+ or1k_expand_move (<MODE>mode, operands[0], operands[1]);
+ DONE;
+})
+
+;; 8-bit, 16-bit and 32-bit moves
+
+(define_insn "*mov<I:mode>_internal"
+ [(set (match_operand:I 0 "nonimmediate_operand" "=r,r,r,r, m,r")
+ (match_operand:I 1 "input_operand" " r,M,K,I,rO,m"))]
+ "register_operand (operands[0], <I:MODE>mode)
+ || reg_or_0_operand (operands[1], <I:MODE>mode)"
+ "@
+ l.or\t%0, %1, %1
+ l.movhi\t%0, hi(%1)
+ l.ori\t%0, r0, %1
+ l.xori\t%0, r0, %1
+ l.s<I:ldst>\t%0, %r1
+ l.l<I:ldst>z\t%0, %1"
+ [(set_attr "type" "alu,alu,alu,alu,st,ld")])
+
+;; Hi/Low moves for constant and symbol loading
+
+(define_insn "movsi_high"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (high:SI (match_operand:SI 1 "high_operand" "")))]
+ ""
+ "l.movhi\t%0, %h1"
+ [(set_attr "type" "alu")])
+
+(define_insn "*movsi_lo_sum_iori"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "losum_ior_operand" "")))]
+ ""
+ "l.ori\t%0, %1, %L2"
+ [(set_attr "type" "alu")])
+
+(define_insn "*movsi_lo_sum_addi"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "losum_add_operand" "")))]
+ ""
+ "l.addi\t%0, %1, %L2"
+ [(set_attr "type" "alu")])
+
+;; 64-bit moves
+;; ??? The clobber that emit_move_multi_word emits is arguably incorrect.
+;; Consider gcc.c-torture/execute/20030222-1.c, where a reg-reg DImode
+;; move gets register allocated to a no-op move. At which point the
+;; we actively clobber the input.
+
+(define_expand "movdi"
+ [(set (match_operand:DI 0 "nonimmediate_operand" "")
+ (match_operand:DI 1 "general_operand" ""))]
+ ""
+{
+ if (MEM_P (operands[0]) && !const0_operand(operands[1], DImode))
+ operands[1] = force_reg (DImode, operands[1]);
+})
+
+(define_insn_and_split "*movdi"
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=r,r,o,r")
+ (match_operand:DI 1 "general_operand" " r,o,rO,n"))]
+ "register_operand (operands[0], DImode)
+ || reg_or_0_operand (operands[1], DImode)"
+ "#"
+ ""
+ [(const_int 0)]
+{
+ rtx l0 = operand_subword (operands[0], 0, 0, DImode);
+ rtx l1 = operand_subword (operands[1], 0, 0, DImode);
+ rtx h0 = operand_subword (operands[0], 1, 0, DImode);
+ rtx h1 = operand_subword (operands[1], 1, 0, DImode);
+
+ if (reload_completed && reg_overlap_mentioned_p (l0, h1))
+ {
+ gcc_assert (!reg_overlap_mentioned_p (h0, l1));
+ emit_move_insn (h0, h1);
+ emit_move_insn (l0, l1);
+ }
+ else
+ {
+ emit_move_insn (l0, l1);
+ emit_move_insn (h0, h1);
+ }
+ DONE;
+})
+
+;; -------------------------------------------------------------------------
+;; Sign Extending
+;; -------------------------------------------------------------------------
+
+(define_insn "zero_extendhisi2"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (zero_extend:SI (match_operand:HI 1 "nonimmediate_operand" "r,m")))]
+ ""
+ "@
+ l.exthz\t%0, %1
+ l.lhz\t%0, %1"
+ [(set_attr "insn_support" "sext,*")])
+
+(define_insn "zero_extendqisi2"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (zero_extend:SI (match_operand:QI 1 "nonimmediate_operand" "r,m")))]
+ ""
+ "@
+ l.extbz\t%0, %1
+ l.lbz\t%0, %1"
+ [(set_attr "insn_support" "sext,*")])
+
+;; Sign extension patterns
+
+;; We can do memory extensions with a single load
+(define_insn "extendhisi2"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "r,m")))]
+ ""
+ "@
+ l.exths\t%0, %1
+ l.lhs\t%0, %1"
+ [(set_attr "insn_support" "sext,*")])
+
+(define_insn "extendqisi2"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (sign_extend:SI (match_operand:QI 1 "nonimmediate_operand" "r,m")))]
+ ""
+ "@
+ l.extbs\t%0, %1
+ l.lbs\t%0, %1"
+ [(set_attr "insn_support" "sext,*")])
+
+;; -------------------------------------------------------------------------
+;; Compare instructions
+;; -------------------------------------------------------------------------
+
+;; OpenRISC supports these integer comparisons:
+;;
+;; l.sfeq[i] - equality, r r or r i
+;; l.sfne[i] - not equal, r r or r i
+;; l.sflt{s,u}[i] - less than, signed or unsigned, r r or r i
+;; l.sfle{s,u}[i] - less than or equal, signed or unsigned, r r or r i
+;; l.sfgt{s,u}[i] - greater than, signed or unsigned, r r or r i
+;; l.sfge{s,u}[i] - greater than or equal, signed or unsigned, r r or r i
+;;
+;; EQ,NE,LT,LTU,LE,LEU,GT,GTU,GE,GEU
+;; We iterate through all of these
+;;
+
+(define_code_iterator intcmpcc [ne eq lt ltu gt gtu ge le geu leu])
+(define_code_attr insn [(ne "ne") (eq "eq") (lt "lts") (ltu "ltu")
+ (gt "gts") (gtu "gtu") (ge "ges") (le "les")
+ (geu "geu") (leu "leu") ])
+
+(define_insn "*sf_insn"
+ [(set (reg:BI SR_F_REGNUM)
+ (intcmpcc:BI (match_operand:SI 0 "reg_or_0_operand" "rO,rO")
+ (match_operand:SI 1 "reg_or_s16_operand" "r,I")))]
+ ""
+ "@
+ l.sf<insn>\t%r0, %1
+ l.sf<insn>i\t%r0, %1"
+ [(set_attr "insn_support" "*,sfimm")])
+
+;; -------------------------------------------------------------------------
+;; Conditional Store instructions
+;; -------------------------------------------------------------------------
+
+(define_expand "cstoresi4"
+ [(set (match_operand:SI 0 "register_operand" "")
+ (if_then_else:SI
+ (match_operator 1 "comparison_operator"
+ [(match_operand:SI 2 "reg_or_0_operand" "")
+ (match_operand:SI 3 "reg_or_s16_operand" "")])
+ (match_dup 0)
+ (const_int 0)))]
+ ""
+{
+ or1k_expand_compare (operands + 1);
+ PUT_MODE (operands[1], SImode);
+ emit_insn (gen_rtx_SET (operands[0], operands[1]));
+ DONE;
+})
+
+;; Being able to "copy" SR_F to a general register is helpful for
+;; the atomic insns, wherein the usual usage is to test the success
+;; of the compare-and-swap. Representing the operation in this way,
+;; rather than exposing the cmov immediately, allows the optimizers
+;; to propagate the use of SR_F directly into a branch.
+
+(define_expand "sne_sr_f"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (ne:SI (reg:BI SR_F_REGNUM) (const_int 0)))]
+ "")
+
+(define_insn_and_split "*scc"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (match_operator:SI 1 "equality_comparison_operator"
+ [(reg:BI SR_F_REGNUM) (const_int 0)]))]
+ ""
+ "#"
+ "reload_completed"
+ [(set (match_dup 0) (const_int 1))
+ (set (match_dup 0)
+ (if_then_else:SI (match_dup 1)
+ (match_dup 0)
+ (const_int 0)))]
+ "")
+
+(define_expand "mov<I:mode>cc"
+ [(set (match_operand:I 0 "register_operand" "")
+ (if_then_else:I (match_operand 1 "comparison_operator" "")
+ (match_operand:I 2 "reg_or_0_operand" "")
+ (match_operand:I 3 "reg_or_0_operand" "")))]
+ ""
+{
+ rtx xops[3] = { operands[1], XEXP (operands[1], 0), XEXP (operands[1], 1) };
+ or1k_expand_compare (xops);
+ operands[1] = xops[0];
+})
+
+(define_insn_and_split "*cmov<I:mode>"
+ [(set (match_operand:I 0 "register_operand" "=r")
+ (if_then_else:I
+ (match_operator 3 "equality_comparison_operator"
+ [(reg:BI SR_F_REGNUM) (const_int 0)])
+ (match_operand:I 1 "reg_or_0_operand" "rO")
+ (match_operand:I 2 "reg_or_0_operand" "rO")))]
+ ""
+{
+ return (GET_CODE (operands[3]) == NE
+ ? "l.cmov\t%0, %r1, %r2"
+ : "l.cmov\t%0, %r2, %r1");
+}
+ "!TARGET_CMOV"
+ [(const_int 0)]
+{
+ rtx x;
+ rtx label = gen_rtx_LABEL_REF (VOIDmode, gen_label_rtx ());
+
+ /* Generated a *cbranch pattern. */
+ if (rtx_equal_p (operands[0], operands[2]))
+ {
+ PUT_CODE (operands[3], (GET_CODE (operands[3]) == NE) ? EQ : NE);
+ x = gen_rtx_IF_THEN_ELSE (VOIDmode, operands[3], label, pc_rtx);
+ emit_jump_insn (gen_rtx_SET (pc_rtx, x));
+ emit_move_insn (operands[0], operands[1]);
+ }
+ else
+ {
+ x = gen_rtx_IF_THEN_ELSE (VOIDmode, operands[3], label, pc_rtx);
+ emit_move_insn (operands[0], operands[1]);
+ emit_jump_insn (gen_rtx_SET (pc_rtx, x));
+ emit_move_insn (operands[0], operands[2]);
+ }
+
+ emit_label (XEXP (label, 0));
+ DONE;
+})
+
+;; -------------------------------------------------------------------------
+;; Branch instructions
+;; -------------------------------------------------------------------------
+
+(define_expand "cbranchsi4"
+ [(set (pc)
+ (if_then_else
+ (match_operator 0 "comparison_operator"
+ [(match_operand:SI 1 "reg_or_0_operand" "")
+ (match_operand:SI 2 "reg_or_s16_operand" "")])
+ (label_ref (match_operand 3 "" ""))
+ (pc)))]
+ ""
+{
+ or1k_expand_compare (operands);
+})
+
+(define_insn "*cbranch"
+ [(set (pc)
+ (if_then_else
+ (match_operator 1 "equality_comparison_operator"
+ [(reg:BI SR_F_REGNUM) (const_int 0)])
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+{
+ return (GET_CODE (operands[1]) == NE
+ ? "l.bf\t%0%#"
+ : "l.bnf\t%0%#");
+}
+ [(set_attr "type" "control")])
+
+;; -------------------------------------------------------------------------
+;; Jump instructions
+;; -------------------------------------------------------------------------
+
+(define_insn "jump"
+ [(set (pc) (label_ref (match_operand 0 "" "")))]
+ ""
+ "l.j\t%0%#"
+ [(set_attr "type" "control")])
+
+(define_insn "indirect_jump"
+ [(set (pc) (match_operand:SI 0 "register_operand" "r"))]
+ ""
+ "l.jr\t%0%#"
+ [(set_attr "type" "control")])
+
+;; -------------------------------------------------------------------------
+;; Prologue & Epilogue
+;; -------------------------------------------------------------------------
+
+(define_expand "prologue"
+ [(const_int 1)]
+ ""
+{
+ or1k_expand_prologue ();
+ DONE;
+})
+
+;; Expand epilogue as RTL
+(define_expand "epilogue"
+ [(return)]
+ ""
+{
+ or1k_expand_epilogue ();
+ emit_jump_insn (gen_simple_return ());
+ DONE;
+})
+
+(define_expand "sibcall_epilogue"
+ [(return)]
+ ""
+{
+ or1k_expand_epilogue ();
+ /* Placing a USE of LR here, rather than as a REG_USE on the
+ sibcall itself, means that LR is not unnecessarily live
+ within the function itself, which would force creation of
+ a stack frame. */
+ emit_insn (gen_rtx_USE (VOIDmode, gen_rtx_REG (Pmode, LR_REGNUM)));
+ DONE;
+})
+
+(define_expand "simple_return"
+ [(parallel [(simple_return) (use (match_dup 0))])]
+ ""
+{
+ operands[0] = gen_rtx_REG (Pmode, LR_REGNUM);
+})
+
+(define_insn "*simple_return"
+ [(simple_return)
+ (use (match_operand:SI 0 "register_operand" "r"))]
+ ""
+ "l.jr\t%0%#"
+ [(set_attr "type" "control")])
+
+(define_expand "eh_return"
+ [(use (match_operand 0 "general_operand"))]
+ ""
+{
+ or1k_expand_eh_return (operands[0]);
+ DONE;
+})
+
+;; This is a placeholder, during RA, in order to create the PIC regiter.
+;; We do this so that we don't unconditionally mark the LR register as
+;; clobbered. It is replaced during prologue generation with the proper
+;; set_got pattern below. This works because the set_got_tmp insn is the
+;; first insn in the stream and that it isn't moved during RA.
+(define_insn "set_got_tmp"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (unspec_volatile:SI [(const_int 0)] UNSPECV_SET_GOT))]
+ ""
+{
+ gcc_unreachable ();
+})
+
+;; The insn to initialize the GOT.
+(define_insn "set_got"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (unspec:SI [(const_int 0)] UNSPEC_SET_GOT))
+ (clobber (reg:SI LR_REGNUM))]
+ ""
+{
+ return ("l.jal\t8\;"
+ " l.movhi\t%0, gotpchi(_GLOBAL_OFFSET_TABLE_-4)\;"
+ "l.ori\t%0, %0, gotpclo(_GLOBAL_OFFSET_TABLE_+0)\;"
+ "l.add\t%0, %0, r9");
+}
+ [(set_attr "length" "16")
+ (set_attr "type" "multi")])
+
+;; Block memory operations from being scheduled across frame (de)allocation.
+(define_insn "frame_addsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (plus:SI
+ (match_operand:SI 1 "register_operand" "%r,r")
+ (match_operand:SI 2 "reg_or_s16_operand" " r,I")))
+ (clobber (mem:BLK (scratch)))]
+ "reload_completed"
+ "@
+ l.add\t%0, %1, %2
+ l.addi\t%0, %1, %2")
+
+;; -------------------------------------------------------------------------
+;; Atomic Operations
+;; -------------------------------------------------------------------------
+
+;; Note that MULT stands in for the non-existant NAND rtx_code.
+(define_code_iterator FETCHOP [plus minus ior xor and mult])
+
+(define_code_attr fetchop_name
+ [(plus "add")
+ (minus "sub")
+ (ior "or")
+ (xor "xor")
+ (and "and")
+ (mult "nand")])
+
+(define_code_attr fetchop_pred
+ [(plus "reg_or_s16_operand")
+ (minus "register_operand")
+ (ior "reg_or_u16_operand")
+ (xor "reg_or_s16_operand")
+ (and "reg_or_u16_operand")
+ (mult "reg_or_u16_operand")])
+
+(define_expand "mem_thread_fence"
+ [(match_operand:SI 0 "const_int_operand" "")] ;; model
+ ""
+{
+ memmodel model = memmodel_base (INTVAL (operands[0]));
+ if (model != MEMMODEL_RELAXED)
+ emit_insn (gen_msync ());
+ DONE;
+})
+
+(define_expand "msync"
+ [(set (match_dup 0) (unspec:BLK [(match_dup 0)] UNSPEC_MSYNC))]
+ ""
+{
+ operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
+ MEM_VOLATILE_P (operands[0]) = 1;
+})
+
+(define_insn "*msync"
+ [(set (match_operand:BLK 0 "" "")
+ (unspec:BLK [(match_dup 0)] UNSPEC_MSYNC))]
+ ""
+ "l.msync")
+
+(define_insn "load_locked_si"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (unspec_volatile:SI
+ [(match_operand:SI 1 "memory_operand" "m")] UNSPECV_LL))]
+ ""
+ "l.lwa\t%0,%1"
+ [(set_attr "type" "ld")])
+
+(define_insn "store_conditional_si"
+ [(set (reg:BI SR_F_REGNUM)
+ (unspec_volatile:BI [(const_int 0)] UNSPECV_SC))
+ (set (match_operand:SI 0 "memory_operand" "=m")
+ (match_operand:SI 1 "reg_or_0_operand" "rO"))]
+ ""
+ "l.swa\t%0,%r1"
+ [(set_attr "type" "st")])
+
+(define_expand "atomic_compare_and_swapsi"
+ [(match_operand:SI 0 "register_operand") ;; bool output
+ (match_operand:SI 1 "register_operand") ;; val output
+ (match_operand:SI 2 "memory_operand") ;; memory
+ (match_operand:SI 3 "reg_or_s16_operand") ;; expected
+ (match_operand:SI 4 "reg_or_0_operand") ;; desired
+ (match_operand:SI 5 "const_int_operand") ;; is_weak
+ (match_operand:SI 6 "const_int_operand") ;; mod_s
+ (match_operand:SI 7 "const_int_operand")] ;; mod_f
+ ""
+{
+ or1k_expand_atomic_compare_and_swap (operands);
+ DONE;
+})
+
+(define_expand "atomic_compare_and_swap<mode>"
+ [(match_operand:SI 0 "register_operand") ;; bool output
+ (match_operand:I12 1 "register_operand") ;; val output
+ (match_operand:I12 2 "memory_operand") ;; memory
+ (match_operand:I12 3 "register_operand") ;; expected
+ (match_operand:I12 4 "reg_or_0_operand") ;; desired
+ (match_operand:SI 5 "const_int_operand") ;; is_weak
+ (match_operand:SI 6 "const_int_operand") ;; mod_s
+ (match_operand:SI 7 "const_int_operand")] ;; mod_f
+ ""
+{
+ or1k_expand_atomic_compare_and_swap_qihi (operands);
+ DONE;
+})
+
+(define_expand "atomic_exchangesi"
+ [(match_operand:SI 0 "register_operand") ;; output
+ (match_operand:SI 1 "memory_operand") ;; memory
+ (match_operand:SI 2 "reg_or_0_operand") ;; input
+ (match_operand:SI 3 "const_int_operand")] ;; model
+ ""
+{
+ or1k_expand_atomic_exchange (operands);
+ DONE;
+})
+
+(define_expand "atomic_exchange<mode>"
+ [(match_operand:I12 0 "register_operand") ;; output
+ (match_operand:I12 1 "memory_operand") ;; memory
+ (match_operand:I12 2 "reg_or_0_operand") ;; input
+ (match_operand:SI 3 "const_int_operand")] ;; model
+ ""
+{
+ or1k_expand_atomic_exchange_qihi (operands);
+ DONE;
+})
+
+(define_expand "atomic_<fetchop_name>si"
+ [(match_operand:SI 0 "memory_operand") ;; memory
+ (FETCHOP:SI (match_dup 0)
+ (match_operand:SI 1 "<fetchop_pred>")) ;; operand
+ (match_operand:SI 2 "const_int_operand")] ;; model
+ ""
+{
+ or1k_expand_atomic_op (<CODE>, operands[0], operands[1], NULL, NULL);
+ DONE;
+})
+
+(define_expand "atomic_<fetchop_name><mode>"
+ [(match_operand:I12 0 "memory_operand") ;; memory
+ (FETCHOP:I12 (match_dup 0)
+ (match_operand:I12 1 "register_operand")) ;; operand
+ (match_operand:SI 2 "const_int_operand")] ;; model
+ ""
+{
+ or1k_expand_atomic_op_qihi (<CODE>, operands[0], operands[1], NULL, NULL);
+ DONE;
+})
+
+(define_expand "atomic_fetch_<fetchop_name>si"
+ [(match_operand:SI 0 "register_operand" "") ;; output
+ (match_operand:SI 1 "memory_operand" "") ;; memory
+ (FETCHOP:SI (match_dup 1)
+ (match_operand:SI 2 "<fetchop_pred>" "")) ;; operand
+ (match_operand:SI 3 "const_int_operand" "")] ;; model
+ ""
+{
+ or1k_expand_atomic_op (<CODE>, operands[1], operands[2], operands[0], NULL);
+ DONE;
+})
+
+(define_expand "atomic_fetch_<fetchop_name><mode>"
+ [(match_operand:I12 0 "register_operand" "") ;; output
+ (match_operand:I12 1 "memory_operand" "") ;; memory
+ (FETCHOP:I12 (match_dup 1)
+ (match_operand:I12 2 "<fetchop_pred>" "")) ;; operand
+ (match_operand:SI 3 "const_int_operand" "")] ;; model
+ ""
+{
+ or1k_expand_atomic_op_qihi (<CODE>, operands[1], operands[2],
+ operands[0], NULL);
+ DONE;
+})
+
+(define_expand "atomic_<fetchop_name>_fetchsi"
+ [(match_operand:SI 0 "register_operand" "") ;; output
+ (match_operand:SI 1 "memory_operand" "") ;; memory
+ (FETCHOP:SI (match_dup 1)
+ (match_operand:SI 2 "<fetchop_pred>" "")) ;; operand
+ (match_operand:SI 3 "const_int_operand" "")] ;; model
+ ""
+{
+ or1k_expand_atomic_op (<CODE>, operands[1], operands[2], NULL, operands[0]);
+ DONE;
+})
+
+(define_expand "atomic_<fetchop_name>_fetch<mode>"
+ [(match_operand:I12 0 "register_operand" "") ;; output
+ (match_operand:I12 1 "memory_operand" "") ;; memory
+ (FETCHOP:I12 (match_dup 1)
+ (match_operand:I12 2 "<fetchop_pred>" "")) ;; operand
+ (match_operand:SI 3 "const_int_operand" "")] ;; model
+ ""
+{
+ or1k_expand_atomic_op_qihi (<CODE>, operands[1], operands[2],
+ NULL, operands[0]);
+ DONE;
+})
+
+;; -------------------------------------------------------------------------
+;; Call Instructions
+;; -------------------------------------------------------------------------
+
+;; Leave these to last, as the modeless operand for call_value
+;; interferes with normal patterns.
+
+(define_expand "call"
+ [(call (match_operand 0) (match_operand 1))]
+ ""
+{
+ or1k_expand_call (NULL, operands[0], operands[1], false);
+ DONE;
+})
+
+(define_expand "sibcall"
+ [(call (match_operand 0) (match_operand 1))]
+ ""
+{
+ or1k_expand_call (NULL, operands[0], operands[1], true);
+ DONE;
+})
+
+(define_expand "call_value"
+ [(set (match_operand 0) (call (match_operand 1) (match_operand 2)))]
+ ""
+{
+ or1k_expand_call (operands[0], operands[1], operands[2], false);
+ DONE;
+})
+
+(define_expand "sibcall_value"
+ [(set (match_operand 0) (call (match_operand 1) (match_operand 2)))]
+ ""
+{
+ or1k_expand_call (operands[0], operands[1], operands[2], true);
+ DONE;
+})
+
+(define_insn "*call"
+ [(call (mem:SI (match_operand:SI 0 "call_insn_operand" "r,s"))
+ (match_operand 1))
+ (clobber (reg:SI LR_REGNUM))]
+ "!SIBLING_CALL_P (insn)"
+ "@
+ l.jalr\t%0%#
+ l.jal\t%P0%#"
+ [(set_attr "type" "control")])
+
+(define_insn "*sibcall"
+ [(call (mem:SI (match_operand:SI 0 "call_insn_operand" "c,s"))
+ (match_operand 1))]
+ "SIBLING_CALL_P (insn)"
+ "@
+ l.jr\t%0%#
+ l.j\t%P0%#"
+ [(set_attr "type" "control")])
+
+(define_insn "*call_value"
+ [(set (match_operand 0)
+ (call (mem:SI (match_operand:SI 1 "call_insn_operand" "r,s"))
+ (match_operand 2)))
+ (clobber (reg:SI LR_REGNUM))]
+ "!SIBLING_CALL_P (insn)"
+ "@
+ l.jalr\t%1%#
+ l.jal\t%P1%#"
+ [(set_attr "type" "control")])
+
+(define_insn "*sibcall_value"
+ [(set (match_operand 0)
+ (call (mem:SI (match_operand:SI 1 "call_insn_operand" "c,s"))
+ (match_operand 2)))]
+ "SIBLING_CALL_P (insn)"
+ "@
+ l.jr\t%1%#
+ l.j\t%P1%#"
+ [(set_attr "type" "control")])
diff --git a/gcc/config/or1k/or1k.opt b/gcc/config/or1k/or1k.opt
new file mode 100644
index 00000000000..3cc9422f756
--- /dev/null
+++ b/gcc/config/or1k/or1k.opt
@@ -0,0 +1,67 @@
+; OpenRISC command line options
+
+; Copyright (C) 2010-2018 Free Software Foundation, Inc.
+;
+; This file is part of GCC.
+;
+; GCC is free software; you can redistribute it and/or modify it under
+; the terms of the GNU General Public License as published by the Free
+; Software Foundation; either version 3, or (at your option) any later
+; version.
+;
+; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+; WARRANTY; without even the implied warranty of MERCHANTABILITY or
+; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+; for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with GCC; see the file COPYING3. If not see
+; <http://www.gnu.org/licenses/>.
+
+; See the GCC internals manual (options.texi) for a description of
+; this file's format.
+
+; Please try to keep this file in ASCII collating order.
+
+mhard-div
+Target RejectNegative InverseMask(SOFT_DIV)
+Use hardware divide instructions, use -msoft-div for emulation.
+
+mhard-mul
+Target RejectNegative InverseMask(SOFT_MUL).
+Use hardware multiply instructions, use -msoft-mul for emulation.
+
+mcmov
+Target RejectNegative Mask(CMOV)
+Allows generation of binaries which use the l.cmov instruction. If your target
+does not support this the compiler will generate the equivalent using set and
+branch.
+
+mror
+Target RejectNegative Mask(ROR)
+Allows generation of binaries which use the l.rori instructions.
+
+msext
+Target RejectNegative Mask(SEXT)
+Allows generation of binaries which use sign-extension instructions. If your
+target does not support this the compiler will use memory loads to perform sign
+extension.
+
+msfimm
+Target RejectNegative Mask(SFIMM)
+Allows generation of binaries which use l.sf*i instructions. If your target
+does not support this the compiler will generate instructions to store the
+immediate to a register first.
+
+mshftimm
+Target RejectNegative Mask(SHFTIMM)
+Allows generation of binaries which support shifts and rotate instructions
+supporting immediate arguments, for example l.rori.
+
+msoft-div
+Target RejectNegative Mask(SOFT_DIV)
+Use divide emulation.
+
+msoft-mul
+Target RejectNegative Mask(SOFT_MUL).
+Use multiply emulation.
diff --git a/gcc/config/or1k/predicates.md b/gcc/config/or1k/predicates.md
new file mode 100644
index 00000000000..10e39de5d08
--- /dev/null
+++ b/gcc/config/or1k/predicates.md
@@ -0,0 +1,84 @@
+;; Predicate definitions for OpenRISC
+;; Copyright (C) 2018 Free Software Foundation, Inc.
+;; Contributed by Stafford Horne
+
+;; This file is part of GCC.
+
+;; GCC is free software; you can redistribute it and/or modify it
+;; under the terms of the GNU General Public License as published
+;; by the Free Software Foundation; either version 3, or (at your
+;; option) any later version.
+
+;; GCC is distributed in the hope that it will be useful, but WITHOUT
+;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+;; License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+;; -------------------------------------------------------------------------
+;; Predicates
+;; -------------------------------------------------------------------------
+
+(define_predicate "input_operand"
+ (ior (match_operand 0 "register_operand")
+ (match_operand 0 "memory_operand")
+ (and (match_code "const_int")
+ (match_test "satisfies_constraint_I (op)
+ || satisfies_constraint_K (op)
+ || satisfies_constraint_M (op)"))))
+
+(define_predicate "const0_operand"
+ (and (match_code "const_int,const_wide_int,const_double,const_vector")
+ (match_test "op == CONST0_RTX (mode)")))
+
+(define_predicate "reg_or_0_operand"
+ (ior (match_operand 0 "register_operand")
+ (match_operand 0 "const0_operand")))
+
+(define_predicate "reg_or_u6_operand"
+ (if_then_else (match_code "const_int")
+ (match_test "INTVAL (op) >= 0 && INTVAL (op) <= 0x3f")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "reg_or_u16_operand"
+ (if_then_else (match_code "const_int")
+ (match_test "INTVAL (op) >= 0 && INTVAL (op) <= 0xffff")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "reg_or_s16_operand"
+ (if_then_else (match_code "const_int")
+ (match_test "INTVAL (op) >= -32768 && INTVAL (op) <= 32767")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "call_insn_operand"
+ (ior (match_code "symbol_ref")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "high_operand"
+ (match_code "symbol_ref,label_ref,const,unspec"))
+
+;; Return true for relocations that must use MOVHI+ADDI
+(define_predicate "losum_add_operand"
+ (match_code "symbol_ref,label_ref,const,unspec"))
+
+;; Return true for relocations that must use MOVHI+ORI
+(define_predicate "losum_ior_operand"
+ (and (match_code "unspec")
+ (match_test "XINT(op, 1) == UNSPEC_TLSGD")))
+
+;; Return true for a "virtual" or "soft" register that will be
+;; adjusted to a "soft" or "hard" register during elimination.
+(define_predicate "virtual_frame_reg_operand"
+ (match_code "reg")
+{
+ unsigned regno = REGNO (op);
+ return (regno != STACK_POINTER_REGNUM
+ && regno != HARD_FRAME_POINTER_REGNUM
+ && REGNO_PTR_FRAME_P (regno));
+})
+
+(define_predicate "equality_comparison_operator"
+ (match_code "ne,eq"))
diff --git a/gcc/config/or1k/rtems.h b/gcc/config/or1k/rtems.h
new file mode 100644
index 00000000000..0c3d39cc9c4
--- /dev/null
+++ b/gcc/config/or1k/rtems.h
@@ -0,0 +1,30 @@
+/* Target Newlib Definitions for OpenRISC.
+ Copyright (C) 2018 Free Software Foundation, Inc.
+ Contributed by Joel Sherrill (joel.sherrill@OARcorp.com).
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+/* Target OS builtins. */
+#undef TARGET_OS_CPP_BUILTINS
+#define TARGET_OS_CPP_BUILTINS() \
+ do \
+ { \
+ builtin_define ("__rtems__"); \
+ builtin_define ("__USE_INIT_FINI__"); \
+ builtin_assert ("system=rtems"); \
+ } \
+ while (0)
diff --git a/gcc/config/or1k/t-or1k b/gcc/config/or1k/t-or1k
new file mode 100644
index 00000000000..6771c82da08
--- /dev/null
+++ b/gcc/config/or1k/t-or1k
@@ -0,0 +1,22 @@
+# Target Makefile Fragment for OpenRISC
+# Copyright (C) 2018 Free Software Foundation, Inc.
+# Contributed by Stafford Horne.
+#
+# This file is part of GCC.
+#
+# GCC is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published
+# by the Free Software Foundation; either version 3, or (at your
+# option) any later version.
+#
+# GCC is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+# License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+
+comma=,
+MULTILIB_OPTIONS = $(subst $(comma), ,$(TM_MULTILIB_CONFIG))
diff --git a/gcc/config/or1k/t-rtems b/gcc/config/or1k/t-rtems
new file mode 100644
index 00000000000..e4e5e1dca97
--- /dev/null
+++ b/gcc/config/or1k/t-rtems
@@ -0,0 +1,3 @@
+# RTEMS OR1K multilibs
+
+# No custom multilibs defined
diff --git a/gcc/configure b/gcc/configure
index c49b4b264e8..9e9dcb1b33f 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -24331,6 +24331,18 @@ foo: .long 25
tls_first_minor=20
tls_as_opt='--fatal-warnings'
;;
+ or1k*-*-*)
+ conftest_s='
+ .section ".tdata","awT", at progbits
+foo: .long 25
+ .text
+ l.movhi r3, tpoffha(foo)
+ l.add r3, r3, r10
+ l.lwz r4, tpofflo(foo)(r3)'
+ tls_first_major=2
+ tls_first_minor=30
+ tls_as_opt=--fatal-warnings
+ ;;
powerpc-ibm-aix*)
conftest_s='
.extern __get_tpointer
diff --git a/gcc/configure.ac b/gcc/configure.ac
index f43af0b8d20..b79a604061c 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -3460,6 +3460,18 @@ foo: .long 25
tls_first_minor=20
tls_as_opt='--fatal-warnings'
;;
+ or1k*-*-*)
+ conftest_s='
+ .section ".tdata","awT", at progbits
+foo: .long 25
+ .text
+ l.movhi r3, tpoffha(foo)
+ l.add r3, r3, r10
+ l.lwz r4, tpofflo(foo)(r3)'
+ tls_first_major=2
+ tls_first_minor=30
+ tls_as_opt=--fatal-warnings
+ ;;
powerpc-ibm-aix*)
conftest_s='
.extern __get_tpointer
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 069b71922d2..5263253780a 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -3272,6 +3272,10 @@ information have to.
@item
@uref{#nvptx-x-none,,nvptx-*-none}
@item
+ at uref{#or1k-x-elf,,or1k-*-elf}
+ at item
+ at uref{#or1k-x-linux,,or1k-*-linux}
+ at item
@uref{#powerpc-x-x,,powerpc*-*-*}
@item
@uref{#powerpc-x-darwin,,powerpc-*-darwin*}
@@ -4239,6 +4243,21 @@ the GCC sources.
Use the @option{--disable-sjlj-exceptions} and
@option{--enable-newlib-io-long-long} options when configuring.
+ at html
+<hr />
+ at end html
+ at anchor{or1k-x-elf}
+ at heading or1k-*-elf
+The OpenRISC 1000 32-bit processor with delay slots.
+This configuration is intended for embedded systems.
+
+ at html
+<hr />
+ at end html
+ at anchor{or1k-x-linux}
+ at heading or1k-*-linux
+The OpenRISC 1000 32-bit processor with delay slots.
+
@html
<hr />
@end html
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 57491f1033c..b3b9336b298 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1005,6 +1005,11 @@ Objective-C and Objective-C++ Dialects}.
@emph{Nvidia PTX Options}
@gccoptlist{-m32 -m64 -mmainkernel -moptimize}
+ at emph{OpenRISC Options}
+ at gccoptlist{-mboard=@var{name} -mnewlib -mhard-mul -mhard-div @gol
+-msoft-mul -msoft-div @gol
+-mcmov -mror -msext -msfimm -mshftimm}
+
@emph{PDP-11 Options}
@gccoptlist{-mfpu -msoft-float -mac0 -mno-ac0 -m40 -m45 -m10 @gol
-mint32 -mno-int16 -mint16 -mno-int32 @gol
@@ -14934,6 +14939,7 @@ platform.
* NDS32 Options::
* Nios II Options::
* Nvidia PTX Options::
+* OpenRISC Options::
* PDP-11 Options::
* picoChip Options::
* PowerPC Options::
@@ -22688,6 +22694,68 @@ Generate code for use in OpenMP offloading: enables @option{-msoft-stack} and
@end table
+ at node OpenRISC Options
+ at subsection OpenRISC Options
+ at cindex OpenRISC Options
+
+These options are defined for OpenRISC:
+
+ at table @gcctabopt
+
+ at item -mboard=@var{name}
+ at opindex mboard
+Configure a board specific runtime. This will be passed to the linker for
+newlib board library linking. The default is @code{or1ksim}.
+
+ at item -mnewlib
+ at opindex mnewlib
+For compatibility, it's always newlib for elf now.
+
+ at item -mhard-div
+ at opindex mhard-div
+Generate code for hardware which supports divide instructions. This is the
+default.
+
+ at item -mhard-mul
+ at opindex mhard-mul
+Generate code for hardware which supports multiply instructions. This is the
+default.
+
+ at item -mcmov
+ at opindex mcmov
+Generate code for hardware which supports the conditional move (@code{l.cmov})
+instruction.
+
+ at item -mror
+ at opindex mror
+Generate code for hardware which supports rotate right instructions.
+
+ at item -msext
+ at opindex msext
+Generate code for hardware which supports sign-extension instructions.
+
+ at item -msfimm
+ at opindex msfimm
+Generate code for hardware which supports set flag immediate (@code{l.sf*i})
+instructions.
+
+ at item -mshftimm
+ at opindex mshftimm
+Generate code for hardware which supports shift immediate related instructions
+(i.e. @code{l.srai}, @code{l.srli}, @code{l.slli}, @code{1.rori}). Note, to
+enable generation of the @code{l.rori} instruction the @option{-mror} flag must
+also be specified.
+
+ at item -msoft-div
+ at opindex msoft-div
+Generate code for hardware which requires divide instruction emulation.
+
+ at item -msoft-mul
+ at opindex msoft-mul
+Generate code for hardware which requires multiply instruction emulation.
+
+ at end table
+
@node PDP-11 Options
@subsection PDP-11 Options
@cindex PDP-11 Options
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index 360b36b862f..46806bbea37 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -3003,6 +3003,31 @@ representing a supported PIC or TLS relocation.
@end table
+ at item OpenRISC--- at file{config/or1k/constraints.md}
+ at table @code
+ at item I
+Integer that is valid as an immediate operand in an
+instruction taking a signed 16-bit number. Range
+ at minus{}32768 to 32767.
+
+ at item K
+Integer that is valid as an immediate operand in an
+instruction taking an unsigned 16-bit number. Range
+0 to 65535.
+
+ at item M
+Signed 16-bit constant shifted left 16 bits. (Used with @code{l.movhi})
+
+ at item O
+Zero
+
+ at ifset INTERNALS
+ at item c
+Register usable for sibcalls.
+ at end ifset
+
+ at end table
+
@item PDP-11--- at file{config/pdp11/constraints.md}
@table @code
@item a
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread