* [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available
2015-12-20 5:43 [Qemu-devel] [PATCH v6 0/6] Connect the SPI devices to ZynqMP Peter Crosthwaite
@ 2015-12-20 5:43 ` Peter Crosthwaite
2016-01-07 0:18 ` Alistair Francis
2016-01-07 16:04 ` Peter Maydell
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 2/6] m25p80.c: Add sst25wf080 SPI flash device Peter Crosthwaite
` (4 subsequent siblings)
5 siblings, 2 replies; 14+ messages in thread
From: Peter Crosthwaite @ 2015-12-20 5:43 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, crosthwaite.peter, qemu-arm, pbonzini, alistair.francis
qbus_realize() adds busses as a QOM child of the device in addition to
adding it to the qdev bus list. Change get_child_bus() to use the QOM
child if it is available. This takes priority over the bus-list, but
the child object is checked for type correctness.
This prepares support for aliasing of buses. The use case is SoCs,
where a SoC container needs to present buses to the board level, but
the buses are implemented by controller IP we already model as self
contained qbus-containing devices.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
Currently qbus_realize() ignores errors from object_property_add_child,
so it is hard to guarantee that the QOM linkage is reliable. If it were
the case that that object_property_add_child was supposed to be error
asserting, we could remove the old bus-list strcmp iterator altogether.
hw/core/qdev.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index b3ad467..c96c464 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -581,6 +581,12 @@ void qdev_pass_gpios(DeviceState *dev, DeviceState *container,
BusState *qdev_get_child_bus(DeviceState *dev, const char *name)
{
BusState *bus;
+ Object *child = object_resolve_path_component(OBJECT(dev), name);
+
+ bus = (BusState *)object_dynamic_cast(child, TYPE_BUS);
+ if (bus) {
+ return bus;
+ }
QLIST_FOREACH(bus, &dev->child_bus, sibling) {
if (strcmp(name, bus->name) == 0) {
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available Peter Crosthwaite
@ 2016-01-07 0:18 ` Alistair Francis
2016-01-07 0:25 ` Peter Crosthwaite
2016-01-07 16:04 ` Peter Maydell
1 sibling, 1 reply; 14+ messages in thread
From: Alistair Francis @ 2016-01-07 0:18 UTC (permalink / raw)
To: Peter Crosthwaite
Cc: Peter Maydell, Peter Crosthwaite,
qemu-devel@nongnu.org Developers, Alistair Francis, qemu-arm,
Paolo Bonzini
On Sat, Dec 19, 2015 at 9:43 PM, Peter Crosthwaite
<crosthwaitepeter@gmail.com> wrote:
> qbus_realize() adds busses as a QOM child of the device in addition to
> adding it to the qdev bus list. Change get_child_bus() to use the QOM
> child if it is available. This takes priority over the bus-list, but
> the child object is checked for type correctness.
This doesn't cause problems for anything else? Is there anything else
with the same name or something where this causes conflicts?
Thanks,
Alistair
>
> This prepares support for aliasing of buses. The use case is SoCs,
> where a SoC container needs to present buses to the board level, but
> the buses are implemented by controller IP we already model as self
> contained qbus-containing devices.
>
> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
> ---
> Currently qbus_realize() ignores errors from object_property_add_child,
> so it is hard to guarantee that the QOM linkage is reliable. If it were
> the case that that object_property_add_child was supposed to be error
> asserting, we could remove the old bus-list strcmp iterator altogether.
>
> hw/core/qdev.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/hw/core/qdev.c b/hw/core/qdev.c
> index b3ad467..c96c464 100644
> --- a/hw/core/qdev.c
> +++ b/hw/core/qdev.c
> @@ -581,6 +581,12 @@ void qdev_pass_gpios(DeviceState *dev, DeviceState *container,
> BusState *qdev_get_child_bus(DeviceState *dev, const char *name)
> {
> BusState *bus;
> + Object *child = object_resolve_path_component(OBJECT(dev), name);
> +
> + bus = (BusState *)object_dynamic_cast(child, TYPE_BUS);
> + if (bus) {
> + return bus;
> + }
>
> QLIST_FOREACH(bus, &dev->child_bus, sibling) {
> if (strcmp(name, bus->name) == 0) {
> --
> 1.9.1
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available
2016-01-07 0:18 ` Alistair Francis
@ 2016-01-07 0:25 ` Peter Crosthwaite
2016-01-08 0:04 ` Alistair Francis
0 siblings, 1 reply; 14+ messages in thread
From: Peter Crosthwaite @ 2016-01-07 0:25 UTC (permalink / raw)
To: Alistair Francis
Cc: Peter Maydell, qemu-arm, qemu-devel@nongnu.org Developers,
Paolo Bonzini, Peter Crosthwaite
On Wed, Jan 6, 2016 at 4:18 PM, Alistair Francis
<alistair.francis@xilinx.com> wrote:
> On Sat, Dec 19, 2015 at 9:43 PM, Peter Crosthwaite
> <crosthwaitepeter@gmail.com> wrote:
>> qbus_realize() adds busses as a QOM child of the device in addition to
>> adding it to the qdev bus list. Change get_child_bus() to use the QOM
>> child if it is available. This takes priority over the bus-list, but
>> the child object is checked for type correctness.
>
> This doesn't cause problems for anything else? Is there anything else
> with the same name or something where this causes conflicts?
>
Not that I know of, I'm just being defensive as it is core code. I
suspect that that ignored failure path on the child setter is
incorrect but I can't prove it beyond all doubt.
Regards,
Peter
> Thanks,
>
> Alistair
>
>>
>> This prepares support for aliasing of buses. The use case is SoCs,
>> where a SoC container needs to present buses to the board level, but
>> the buses are implemented by controller IP we already model as self
>> contained qbus-containing devices.
>>
>> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
>> ---
>> Currently qbus_realize() ignores errors from object_property_add_child,
>> so it is hard to guarantee that the QOM linkage is reliable. If it were
>> the case that that object_property_add_child was supposed to be error
>> asserting, we could remove the old bus-list strcmp iterator altogether.
>>
>> hw/core/qdev.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/hw/core/qdev.c b/hw/core/qdev.c
>> index b3ad467..c96c464 100644
>> --- a/hw/core/qdev.c
>> +++ b/hw/core/qdev.c
>> @@ -581,6 +581,12 @@ void qdev_pass_gpios(DeviceState *dev, DeviceState *container,
>> BusState *qdev_get_child_bus(DeviceState *dev, const char *name)
>> {
>> BusState *bus;
>> + Object *child = object_resolve_path_component(OBJECT(dev), name);
>> +
>> + bus = (BusState *)object_dynamic_cast(child, TYPE_BUS);
>> + if (bus) {
>> + return bus;
>> + }
>>
>> QLIST_FOREACH(bus, &dev->child_bus, sibling) {
>> if (strcmp(name, bus->name) == 0) {
>> --
>> 1.9.1
>>
>>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available
2016-01-07 0:25 ` Peter Crosthwaite
@ 2016-01-08 0:04 ` Alistair Francis
0 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2016-01-08 0:04 UTC (permalink / raw)
To: Peter Crosthwaite
Cc: Peter Maydell, Peter Crosthwaite,
qemu-devel@nongnu.org Developers, Alistair Francis, qemu-arm,
Paolo Bonzini
On Wed, Jan 6, 2016 at 4:25 PM, Peter Crosthwaite
<crosthwaitepeter@gmail.com> wrote:
> On Wed, Jan 6, 2016 at 4:18 PM, Alistair Francis
> <alistair.francis@xilinx.com> wrote:
>> On Sat, Dec 19, 2015 at 9:43 PM, Peter Crosthwaite
>> <crosthwaitepeter@gmail.com> wrote:
>>> qbus_realize() adds busses as a QOM child of the device in addition to
>>> adding it to the qdev bus list. Change get_child_bus() to use the QOM
>>> child if it is available. This takes priority over the bus-list, but
>>> the child object is checked for type correctness.
>>
>> This doesn't cause problems for anything else? Is there anything else
>> with the same name or something where this causes conflicts?
>>
>
> Not that I know of, I'm just being defensive as it is core code. I
> suspect that that ignored failure path on the child setter is
> incorrect but I can't prove it beyond all doubt.
I just re-read what I said and it doesn't really make sense. My only
concern was busses with the same name somehow having conflicts that
weren't previously there. I can't think of any case where this would
happen though.
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Thanks,
Alistair
>
> Regards,
> Peter
>
>> Thanks,
>>
>> Alistair
>>
>>>
>>> This prepares support for aliasing of buses. The use case is SoCs,
>>> where a SoC container needs to present buses to the board level, but
>>> the buses are implemented by controller IP we already model as self
>>> contained qbus-containing devices.
>>>
>>> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
>>> ---
>>> Currently qbus_realize() ignores errors from object_property_add_child,
>>> so it is hard to guarantee that the QOM linkage is reliable. If it were
>>> the case that that object_property_add_child was supposed to be error
>>> asserting, we could remove the old bus-list strcmp iterator altogether.
>>>
>>> hw/core/qdev.c | 6 ++++++
>>> 1 file changed, 6 insertions(+)
>>>
>>> diff --git a/hw/core/qdev.c b/hw/core/qdev.c
>>> index b3ad467..c96c464 100644
>>> --- a/hw/core/qdev.c
>>> +++ b/hw/core/qdev.c
>>> @@ -581,6 +581,12 @@ void qdev_pass_gpios(DeviceState *dev, DeviceState *container,
>>> BusState *qdev_get_child_bus(DeviceState *dev, const char *name)
>>> {
>>> BusState *bus;
>>> + Object *child = object_resolve_path_component(OBJECT(dev), name);
>>> +
>>> + bus = (BusState *)object_dynamic_cast(child, TYPE_BUS);
>>> + if (bus) {
>>> + return bus;
>>> + }
>>>
>>> QLIST_FOREACH(bus, &dev->child_bus, sibling) {
>>> if (strcmp(name, bus->name) == 0) {
>>> --
>>> 1.9.1
>>>
>>>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available Peter Crosthwaite
2016-01-07 0:18 ` Alistair Francis
@ 2016-01-07 16:04 ` Peter Maydell
1 sibling, 0 replies; 14+ messages in thread
From: Peter Maydell @ 2016-01-07 16:04 UTC (permalink / raw)
To: Peter Crosthwaite
Cc: Paolo Bonzini, Peter Crosthwaite, qemu-arm, QEMU Developers,
Alistair Francis
On 20 December 2015 at 05:43, Peter Crosthwaite
<crosthwaitepeter@gmail.com> wrote:
> qbus_realize() adds busses as a QOM child of the device in addition to
> adding it to the qdev bus list. Change get_child_bus() to use the QOM
> child if it is available. This takes priority over the bus-list, but
> the child object is checked for type correctness.
>
> This prepares support for aliasing of buses. The use case is SoCs,
> where a SoC container needs to present buses to the board level, but
> the buses are implemented by controller IP we already model as self
> contained qbus-containing devices.
>
> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
> ---
> Currently qbus_realize() ignores errors from object_property_add_child,
> so it is hard to guarantee that the QOM linkage is reliable. If it were
> the case that that object_property_add_child was supposed to be error
> asserting, we could remove the old bus-list strcmp iterator altogether.
>
> hw/core/qdev.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/hw/core/qdev.c b/hw/core/qdev.c
> index b3ad467..c96c464 100644
> --- a/hw/core/qdev.c
> +++ b/hw/core/qdev.c
> @@ -581,6 +581,12 @@ void qdev_pass_gpios(DeviceState *dev, DeviceState *container,
> BusState *qdev_get_child_bus(DeviceState *dev, const char *name)
> {
> BusState *bus;
> + Object *child = object_resolve_path_component(OBJECT(dev), name);
> +
> + bus = (BusState *)object_dynamic_cast(child, TYPE_BUS);
> + if (bus) {
> + return bus;
> + }
>
> QLIST_FOREACH(bus, &dev->child_bus, sibling) {
> if (strcmp(name, bus->name) == 0) {
This looks OK to me (and I like the effective API you get for
devices using things), but I don't know enough QOM/qdev internals
to be completely confident giving it a reviewed-by.
thanks
-- PMM
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Qemu-devel] [PATCH v6 2/6] m25p80.c: Add sst25wf080 SPI flash device
2015-12-20 5:43 [Qemu-devel] [PATCH v6 0/6] Connect the SPI devices to ZynqMP Peter Crosthwaite
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available Peter Crosthwaite
@ 2015-12-20 5:43 ` Peter Crosthwaite
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 3/6] ssi: Move ssi.h into a separate directory Peter Crosthwaite
` (3 subsequent siblings)
5 siblings, 0 replies; 14+ messages in thread
From: Peter Crosthwaite @ 2015-12-20 5:43 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, crosthwaite.peter, qemu-arm, pbonzini, alistair.francis
From: Alistair Francis <alistair.francis@xilinx.com>
Add the sst25wf080 SPI flash device.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
hw/block/m25p80.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index efc43dd..7b9f97c 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -163,6 +163,7 @@ static const FlashPartInfo known_devices[] = {
{ INFO("sst25wf010", 0xbf2502, 0, 64 << 10, 2, ER_4K) },
{ INFO("sst25wf020", 0xbf2503, 0, 64 << 10, 4, ER_4K) },
{ INFO("sst25wf040", 0xbf2504, 0, 64 << 10, 8, ER_4K) },
+ { INFO("sst25wf080", 0xbf2505, 0, 64 << 10, 16, ER_4K) },
/* ST Microelectronics -- newer production may have feature updates */
{ INFO("m25p05", 0x202010, 0, 32 << 10, 2, 0) },
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v6 3/6] ssi: Move ssi.h into a separate directory
2015-12-20 5:43 [Qemu-devel] [PATCH v6 0/6] Connect the SPI devices to ZynqMP Peter Crosthwaite
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 1/6] qdev: get_child_bus(): Use QOM lookup if available Peter Crosthwaite
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 2/6] m25p80.c: Add sst25wf080 SPI flash device Peter Crosthwaite
@ 2015-12-20 5:43 ` Peter Crosthwaite
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 4/6] xilinx_spips: Separate the state struct into a header Peter Crosthwaite
` (2 subsequent siblings)
5 siblings, 0 replies; 14+ messages in thread
From: Peter Crosthwaite @ 2015-12-20 5:43 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, crosthwaite.peter, qemu-arm, pbonzini, alistair.francis
From: Alistair Francis <alistair.francis@xilinx.com>
Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as
checkpatch complains.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
hw/arm/pxa2xx.c | 2 +-
hw/arm/spitz.c | 2 +-
hw/arm/stellaris.c | 2 +-
hw/arm/strongarm.c | 2 +-
hw/arm/tosa.c | 2 +-
hw/arm/xilinx_zynq.c | 2 +-
hw/arm/z2.c | 2 +-
hw/block/m25p80.c | 2 +-
hw/display/ads7846.c | 2 +-
hw/display/ssd0323.c | 2 +-
hw/microblaze/petalogix_ml605_mmu.c | 2 +-
hw/misc/max111x.c | 2 +-
hw/sd/ssi-sd.c | 2 +-
hw/ssi/pl022.c | 2 +-
hw/ssi/ssi.c | 2 +-
hw/ssi/xilinx_spi.c | 2 +-
hw/ssi/xilinx_spips.c | 2 +-
include/hw/{ => ssi}/ssi.h | 10 ++++++----
18 files changed, 23 insertions(+), 21 deletions(-)
rename include/hw/{ => ssi}/ssi.h (96%)
diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index 79d22d9..54bf152 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -12,7 +12,7 @@
#include "sysemu/sysemu.h"
#include "hw/char/serial.h"
#include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "sysemu/char.h"
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c
index 8d3cc0b..ee8f889 100644
--- a/hw/arm/spitz.c
+++ b/hw/arm/spitz.c
@@ -16,7 +16,7 @@
#include "sysemu/sysemu.h"
#include "hw/pcmcia.h"
#include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "hw/block/flash.h"
#include "qemu/timer.h"
#include "hw/devices.h"
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 0114e0a..4e5cfd1 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -8,7 +8,7 @@
*/
#include "hw/sysbus.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "hw/arm/arm.h"
#include "hw/devices.h"
#include "qemu/timer.h"
diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c
index 9624ecb..4d2ba02 100644
--- a/hw/arm/strongarm.c
+++ b/hw/arm/strongarm.c
@@ -34,7 +34,7 @@
#include "hw/arm/arm.h"
#include "sysemu/char.h"
#include "sysemu/sysemu.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
//#define DEBUG
diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c
index 02814d7..68ad01e 100644
--- a/hw/arm/tosa.c
+++ b/hw/arm/tosa.c
@@ -19,7 +19,7 @@
#include "hw/pcmcia.h"
#include "hw/boards.h"
#include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "sysemu/block-backend.h"
#include "hw/sysbus.h"
#include "exec/address-spaces.h"
diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 1c1a445..11a349b 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -25,7 +25,7 @@
#include "sysemu/block-backend.h"
#include "hw/loader.h"
#include "hw/misc/zynq-xadc.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "qemu/error-report.h"
#define NUM_SPI_FLASHES 4
diff --git a/hw/arm/z2.c b/hw/arm/z2.c
index b44eb76..c82fe2c 100644
--- a/hw/arm/z2.c
+++ b/hw/arm/z2.c
@@ -16,7 +16,7 @@
#include "hw/arm/arm.h"
#include "hw/devices.h"
#include "hw/i2c/i2c.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "hw/boards.h"
#include "sysemu/sysemu.h"
#include "hw/block/flash.h"
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 7b9f97c..addd907 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -24,7 +24,7 @@
#include "hw/hw.h"
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#ifndef M25P80_ERR_DEBUG
#define M25P80_ERR_DEBUG 0
diff --git a/hw/display/ads7846.c b/hw/display/ads7846.c
index 3f35369..cb82317 100644
--- a/hw/display/ads7846.c
+++ b/hw/display/ads7846.c
@@ -10,7 +10,7 @@
* GNU GPL, version 2 or (at your option) any later version.
*/
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "ui/console.h"
typedef struct {
diff --git a/hw/display/ssd0323.c b/hw/display/ssd0323.c
index 9727007..7545da8 100644
--- a/hw/display/ssd0323.c
+++ b/hw/display/ssd0323.c
@@ -10,7 +10,7 @@
/* The controller can support a variety of different displays, but we only
implement one. Most of the commends relating to brightness and geometry
setup are ignored. */
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "ui/console.h"
//#define DEBUG_SSD0323 1
diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
index 462060f..5366cec 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -35,7 +35,7 @@
#include "sysemu/block-backend.h"
#include "hw/char/serial.h"
#include "exec/address-spaces.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "boot.h"
diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c
index bef3651..d619d61 100644
--- a/hw/misc/max111x.c
+++ b/hw/misc/max111x.c
@@ -10,7 +10,7 @@
* GNU GPL, version 2 or (at your option) any later version.
*/
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
typedef struct {
SSISlave parent_obj;
diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index c49ff62..eeb96b9 100644
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -12,7 +12,7 @@
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "hw/sd/sd.h"
//#define DEBUG_SSI_SD 1
diff --git a/hw/ssi/pl022.c b/hw/ssi/pl022.c
index 61d568f..0bbf633 100644
--- a/hw/ssi/pl022.c
+++ b/hw/ssi/pl022.c
@@ -8,7 +8,7 @@
*/
#include "hw/sysbus.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
//#define DEBUG_PL022 1
diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c
index 2aab79b..a0f57c0 100644
--- a/hw/ssi/ssi.c
+++ b/hw/ssi/ssi.c
@@ -12,7 +12,7 @@
* GNU GPL, version 2 or (at your option) any later version.
*/
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
struct SSIBus {
BusState parent_obj;
diff --git a/hw/ssi/xilinx_spi.c b/hw/ssi/xilinx_spi.c
index 620573c..94bb2a7 100644
--- a/hw/ssi/xilinx_spi.c
+++ b/hw/ssi/xilinx_spi.c
@@ -29,7 +29,7 @@
#include "qemu/log.h"
#include "qemu/fifo8.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#ifdef XILINX_SPI_ERR_DEBUG
#define DB_PRINT(...) do { \
diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 0910f54..e9471ff 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -27,7 +27,7 @@
#include "hw/ptimer.h"
#include "qemu/log.h"
#include "qemu/fifo8.h"
-#include "hw/ssi.h"
+#include "hw/ssi/ssi.h"
#include "qemu/bitops.h"
#ifndef XILINX_SPIPS_ERR_DEBUG
diff --git a/include/hw/ssi.h b/include/hw/ssi/ssi.h
similarity index 96%
rename from include/hw/ssi.h
rename to include/hw/ssi/ssi.h
index df0f838..4a0a539 100644
--- a/include/hw/ssi.h
+++ b/include/hw/ssi/ssi.h
@@ -14,6 +14,8 @@
#include "hw/qdev.h"
typedef struct SSISlave SSISlave;
+typedef struct SSISlaveClass SSISlaveClass;
+typedef enum SSICSMode SSICSMode;
#define TYPE_SSI_SLAVE "ssi-slave"
#define SSI_SLAVE(obj) \
@@ -25,14 +27,14 @@ typedef struct SSISlave SSISlave;
#define SSI_GPIO_CS "ssi-gpio-cs"
-typedef enum {
+enum SSICSMode {
SSI_CS_NONE = 0,
SSI_CS_LOW,
SSI_CS_HIGH,
-} SSICSMode;
+};
/* Slave devices. */
-typedef struct SSISlaveClass {
+struct SSISlaveClass {
DeviceClass parent_class;
int (*init)(SSISlave *dev);
@@ -55,7 +57,7 @@ typedef struct SSISlaveClass {
* always be called for the device for every txrx access to the parent bus
*/
uint32_t (*transfer_raw)(SSISlave *dev, uint32_t val);
-} SSISlaveClass;
+};
struct SSISlave {
DeviceState parent_obj;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v6 4/6] xilinx_spips: Separate the state struct into a header
2015-12-20 5:43 [Qemu-devel] [PATCH v6 0/6] Connect the SPI devices to ZynqMP Peter Crosthwaite
` (2 preceding siblings ...)
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 3/6] ssi: Move ssi.h into a separate directory Peter Crosthwaite
@ 2015-12-20 5:43 ` Peter Crosthwaite
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices Peter Crosthwaite
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 6/6] xlnx-ep108: Connect the SPI Flash Peter Crosthwaite
5 siblings, 0 replies; 14+ messages in thread
From: Peter Crosthwaite @ 2015-12-20 5:43 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, crosthwaite.peter, qemu-arm, pbonzini, alistair.francis
From: Alistair Francis <alistair.francis@xilinx.com>
Separate out the XilinxSPIPS struct into a separate header
file.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
hw/ssi/xilinx_spips.c | 46 +++------------------------
include/hw/ssi/xilinx_spips.h | 72 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+), 42 deletions(-)
create mode 100644 include/hw/ssi/xilinx_spips.h
diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index e9471ff..2111719 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -29,6 +29,7 @@
#include "qemu/fifo8.h"
#include "hw/ssi/ssi.h"
#include "qemu/bitops.h"
+#include "hw/ssi/xilinx_spips.h"
#ifndef XILINX_SPIPS_ERR_DEBUG
#define XILINX_SPIPS_ERR_DEBUG 0
@@ -103,8 +104,6 @@
#define R_MOD_ID (0xFC / 4)
-#define R_MAX (R_MOD_ID+1)
-
/* size of TXRX FIFOs */
#define RXFF_A 32
#define TXFF_A 32
@@ -135,30 +134,6 @@ typedef enum {
} FlashCMD;
typedef struct {
- SysBusDevice parent_obj;
-
- MemoryRegion iomem;
- MemoryRegion mmlqspi;
-
- qemu_irq irq;
- int irqline;
-
- uint8_t num_cs;
- uint8_t num_busses;
-
- uint8_t snoop_state;
- qemu_irq *cs_lines;
- SSIBus **spi;
-
- Fifo8 rx_fifo;
- Fifo8 tx_fifo;
-
- uint8_t num_txrx_bytes;
-
- uint32_t regs[R_MAX];
-} XilinxSPIPS;
-
-typedef struct {
XilinxSPIPS parent_obj;
uint8_t lqspi_buf[LQSPI_CACHE_SIZE];
@@ -174,19 +149,6 @@ typedef struct XilinxSPIPSClass {
uint32_t tx_fifo_size;
} XilinxSPIPSClass;
-#define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
-#define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
-
-#define XILINX_SPIPS(obj) \
- OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_CLASS(klass) \
- OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_GET_CLASS(obj) \
- OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
-
-#define XILINX_QSPIPS(obj) \
- OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
-
static inline int num_effective_busses(XilinxSPIPS *s)
{
return (s->regs[R_LQSPI_CFG] & LQSPI_CFG_SEP_BUS &&
@@ -257,7 +219,7 @@ static void xilinx_spips_reset(DeviceState *d)
XilinxSPIPS *s = XILINX_SPIPS(d);
int i;
- for (i = 0; i < R_MAX; i++) {
+ for (i = 0; i < XLNX_SPIPS_R_MAX; i++) {
s->regs[i] = 0;
}
@@ -664,7 +626,7 @@ static void xilinx_spips_realize(DeviceState *dev, Error **errp)
}
memory_region_init_io(&s->iomem, OBJECT(s), xsc->reg_ops, s,
- "spi", R_MAX*4);
+ "spi", XLNX_SPIPS_R_MAX*4);
sysbus_init_mmio(sbd, &s->iomem);
s->irqline = -1;
@@ -708,7 +670,7 @@ static const VMStateDescription vmstate_xilinx_spips = {
.fields = (VMStateField[]) {
VMSTATE_FIFO8(tx_fifo, XilinxSPIPS),
VMSTATE_FIFO8(rx_fifo, XilinxSPIPS),
- VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, R_MAX),
+ VMSTATE_UINT32_ARRAY(regs, XilinxSPIPS, XLNX_SPIPS_R_MAX),
VMSTATE_UINT8(snoop_state, XilinxSPIPS),
VMSTATE_END_OF_LIST()
}
diff --git a/include/hw/ssi/xilinx_spips.h b/include/hw/ssi/xilinx_spips.h
new file mode 100644
index 0000000..dbb9eef
--- /dev/null
+++ b/include/hw/ssi/xilinx_spips.h
@@ -0,0 +1,72 @@
+/*
+ * Header file for the Xilinx Zynq SPI controller
+ *
+ * Copyright (C) 2015 Xilinx Inc
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef XLNX_SPIPS_H
+#define XLNX_SPIPS_H
+
+#include "hw/ssi/ssi.h"
+#include "qemu/fifo8.h"
+
+typedef struct XilinxSPIPS XilinxSPIPS;
+
+#define XLNX_SPIPS_R_MAX (0x100 / 4)
+
+struct XilinxSPIPS {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+ MemoryRegion mmlqspi;
+
+ qemu_irq irq;
+ int irqline;
+
+ uint8_t num_cs;
+ uint8_t num_busses;
+
+ uint8_t snoop_state;
+ qemu_irq *cs_lines;
+ SSIBus **spi;
+
+ Fifo8 rx_fifo;
+ Fifo8 tx_fifo;
+
+ uint8_t num_txrx_bytes;
+
+ uint32_t regs[XLNX_SPIPS_R_MAX];
+};
+
+#define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
+#define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
+
+#define XILINX_SPIPS(obj) \
+ OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
+#define XILINX_SPIPS_CLASS(klass) \
+ OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
+#define XILINX_SPIPS_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
+
+#define XILINX_QSPIPS(obj) \
+ OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
+
+#endif /* XLNX_SPIPS_H */
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices
2015-12-20 5:43 [Qemu-devel] [PATCH v6 0/6] Connect the SPI devices to ZynqMP Peter Crosthwaite
` (3 preceding siblings ...)
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 4/6] xilinx_spips: Separate the state struct into a header Peter Crosthwaite
@ 2015-12-20 5:43 ` Peter Crosthwaite
2016-01-07 15:55 ` Peter Maydell
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 6/6] xlnx-ep108: Connect the SPI Flash Peter Crosthwaite
5 siblings, 1 reply; 14+ messages in thread
From: Peter Crosthwaite @ 2015-12-20 5:43 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, crosthwaite.peter, qemu-arm, pbonzini, alistair.francis
From: Alistair Francis <alistair.francis@xilinx.com>
Connect the Xilinx SPI devices to the ZynqMP model.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
[ PC changes
* Use QOM alias for bus connectivity on SoC level
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
V6:
- Use QOM alias for bus connectivity on SoC level
V5:
- Use the bus renaming function
V4:
- Rename the SPI busses so that they can all be accessed from the SoC
- Don't set the num-busses property
V3:
- Expose the SPI Bus as part of the SoC device
V2:
- Don't connect the SPI flash to the SoC
hw/arm/xlnx-zynqmp.c | 30 ++++++++++++++++++++++++++++++
include/hw/arm/xlnx-zynqmp.h | 3 +++
2 files changed, 33 insertions(+)
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 87553bb..f2e13a4 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -56,6 +56,14 @@ static const int sdhci_intr[XLNX_ZYNQMP_NUM_SDHCI] = {
48, 49,
};
+static const uint64_t spi_addr[XLNX_ZYNQMP_NUM_SPIS] = {
+ 0xFF040000, 0xFF050000,
+};
+
+static const int spi_intr[XLNX_ZYNQMP_NUM_SPIS] = {
+ 19, 20,
+};
+
typedef struct XlnxZynqMPGICRegion {
int region_index;
uint32_t address;
@@ -112,6 +120,12 @@ static void xlnx_zynqmp_init(Object *obj)
qdev_set_parent_bus(DEVICE(&s->sdhci[i]),
sysbus_get_default());
}
+
+ for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
+ object_initialize(&s->spi[i], sizeof(s->spi[i]),
+ TYPE_XILINX_SPIPS);
+ qdev_set_parent_bus(DEVICE(&s->spi[i]), sysbus_get_default());
+ }
}
static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
@@ -286,6 +300,22 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci[i]), 0,
gic_spi[sdhci_intr[i]]);
}
+
+ for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
+ char bus_name[6];
+
+ object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+ gic_spi[spi_intr[i]]);
+
+ /* Alias controller SPI bus to the SoC itself */
+ snprintf(bus_name, 6, "spi%d", i);
+ object_property_add_alias(OBJECT(s), bus_name,
+ OBJECT(&s->spi[i]), "spi0",
+ &error_abort);
+ }
}
static Property xlnx_zynqmp_props[] = {
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index d116092..f598a43 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -25,6 +25,7 @@
#include "hw/ide/pci.h"
#include "hw/ide/ahci.h"
#include "hw/sd/sdhci.h"
+#include "hw/ssi/xilinx_spips.h"
#define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
#define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \
@@ -35,6 +36,7 @@
#define XLNX_ZYNQMP_NUM_GEMS 4
#define XLNX_ZYNQMP_NUM_UARTS 2
#define XLNX_ZYNQMP_NUM_SDHCI 2
+#define XLNX_ZYNQMP_NUM_SPIS 2
#define XLNX_ZYNQMP_NUM_OCM_BANKS 4
#define XLNX_ZYNQMP_OCM_RAM_0_ADDRESS 0xFFFC0000
@@ -66,6 +68,7 @@ typedef struct XlnxZynqMPState {
CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
SysbusAHCIState sata;
SDHCIState sdhci[XLNX_ZYNQMP_NUM_SDHCI];
+ XilinxSPIPS spi[XLNX_ZYNQMP_NUM_SPIS];
char *boot_cpu;
ARMCPU *boot_cpu_ptr;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices Peter Crosthwaite
@ 2016-01-07 15:55 ` Peter Maydell
2016-01-15 15:21 ` Peter Maydell
0 siblings, 1 reply; 14+ messages in thread
From: Peter Maydell @ 2016-01-07 15:55 UTC (permalink / raw)
To: Peter Crosthwaite
Cc: Paolo Bonzini, Peter Crosthwaite, qemu-arm, QEMU Developers,
Alistair Francis
On 20 December 2015 at 05:43, Peter Crosthwaite
<crosthwaitepeter@gmail.com> wrote:
> From: Alistair Francis <alistair.francis@xilinx.com>
>
> Connect the Xilinx SPI devices to the ZynqMP model.
>
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> [ PC changes
> * Use QOM alias for bus connectivity on SoC level
> ]
> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
> @@ -286,6 +300,22 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci[i]), 0,
> gic_spi[sdhci_intr[i]]);
> }
> +
> + for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
> + char bus_name[6];
> +
> + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
> +
> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
> + gic_spi[spi_intr[i]]);
> +
> + /* Alias controller SPI bus to the SoC itself */
> + snprintf(bus_name, 6, "spi%d", i);
I don't much like these hard coded 6s. This is in init which
isn't a hot path, so the simplest thing is to use g_strdup_printf()
and then g_free() it when we're done.
Similarly in patch 6.
Otherwise I like this; I did a quick tweak to my sd card patchset
to use this approach and it seems to at least compile and do
the right thing in info qtree (I don't have a xilinx test image
to do more).
Haven't looked at the detail of how we're doing this in patch 1 yet.
thanks
-- PMM
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices
2016-01-07 15:55 ` Peter Maydell
@ 2016-01-15 15:21 ` Peter Maydell
2016-01-15 21:32 ` Alistair Francis
0 siblings, 1 reply; 14+ messages in thread
From: Peter Maydell @ 2016-01-15 15:21 UTC (permalink / raw)
To: Peter Crosthwaite
Cc: Paolo Bonzini, Peter Crosthwaite, qemu-arm, QEMU Developers,
Alistair Francis
On 7 January 2016 at 15:55, Peter Maydell <peter.maydell@linaro.org> wrote:
> On 20 December 2015 at 05:43, Peter Crosthwaite
> <crosthwaitepeter@gmail.com> wrote:
>> + for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
>> + char bus_name[6];
>> +
>> + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
>> +
>> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
>> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
>> + gic_spi[spi_intr[i]]);
>> +
>> + /* Alias controller SPI bus to the SoC itself */
>> + snprintf(bus_name, 6, "spi%d", i);
>
> I don't much like these hard coded 6s. This is in init which
> isn't a hot path, so the simplest thing is to use g_strdup_printf()
> and then g_free() it when we're done.
>
> Similarly in patch 6.
>
> Otherwise I like this; I did a quick tweak to my sd card patchset
> to use this approach and it seems to at least compile and do
> the right thing in info qtree (I don't have a xilinx test image
> to do more).
>
> Haven't looked at the detail of how we're doing this in patch 1 yet.
Hi Peter (and/or Alistair) -- do you have time to do a quick respin
of this patchset to use g_strdup_printf() in these cases? It would
be nice to get this series into the tree, because my sd card rework
patchset depends on it...
thanks
-- PMM
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices
2016-01-15 15:21 ` Peter Maydell
@ 2016-01-15 21:32 ` Alistair Francis
0 siblings, 0 replies; 14+ messages in thread
From: Alistair Francis @ 2016-01-15 21:32 UTC (permalink / raw)
To: Peter Maydell
Cc: Peter Crosthwaite, QEMU Developers, Alistair Francis,
Peter Crosthwaite, qemu-arm, Paolo Bonzini
On Fri, Jan 15, 2016 at 7:21 AM, Peter Maydell <peter.maydell@linaro.org> wrote:
> On 7 January 2016 at 15:55, Peter Maydell <peter.maydell@linaro.org> wrote:
>> On 20 December 2015 at 05:43, Peter Crosthwaite
>> <crosthwaitepeter@gmail.com> wrote:
>>> + for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
>>> + char bus_name[6];
>>> +
>>> + object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
>>> +
>>> + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
>>> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
>>> + gic_spi[spi_intr[i]]);
>>> +
>>> + /* Alias controller SPI bus to the SoC itself */
>>> + snprintf(bus_name, 6, "spi%d", i);
>>
>> I don't much like these hard coded 6s. This is in init which
>> isn't a hot path, so the simplest thing is to use g_strdup_printf()
>> and then g_free() it when we're done.
>>
>> Similarly in patch 6.
>>
>> Otherwise I like this; I did a quick tweak to my sd card patchset
>> to use this approach and it seems to at least compile and do
>> the right thing in info qtree (I don't have a xilinx test image
>> to do more).
>>
>> Haven't looked at the detail of how we're doing this in patch 1 yet.
>
> Hi Peter (and/or Alistair) -- do you have time to do a quick respin
> of this patchset to use g_strdup_printf() in these cases? It would
> be nice to get this series into the tree, because my sd card rework
> patchset depends on it...
Yep! I'll do it now.
Thanks,
Alistair
>
> thanks
> -- PMM
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Qemu-devel] [PATCH v6 6/6] xlnx-ep108: Connect the SPI Flash
2015-12-20 5:43 [Qemu-devel] [PATCH v6 0/6] Connect the SPI devices to ZynqMP Peter Crosthwaite
` (4 preceding siblings ...)
2015-12-20 5:43 ` [Qemu-devel] [PATCH v6 5/6] xlnx-zynqmp: Connect the SPI devices Peter Crosthwaite
@ 2015-12-20 5:43 ` Peter Crosthwaite
5 siblings, 0 replies; 14+ messages in thread
From: Peter Crosthwaite @ 2015-12-20 5:43 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, crosthwaite.peter, qemu-arm, pbonzini, alistair.francis
From: Alistair Francis <alistair.francis@xilinx.com>
Connect the sst25wf080 SPI flash to the EP108 board.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
hw/arm/xlnx-ep108.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
index 85b978f..d1912aa 100644
--- a/hw/arm/xlnx-ep108.c
+++ b/hw/arm/xlnx-ep108.c
@@ -33,6 +33,7 @@ static struct arm_boot_info xlnx_ep108_binfo;
static void xlnx_ep108_init(MachineState *machine)
{
XlnxEP108 *s = g_new0(XlnxEP108, 1);
+ int i;
Error *err = NULL;
object_initialize(&s->soc, sizeof(s->soc), TYPE_XLNX_ZYNQMP);
@@ -60,6 +61,21 @@ static void xlnx_ep108_init(MachineState *machine)
machine->ram_size);
memory_region_add_subregion(get_system_memory(), 0, &s->ddr_ram);
+ for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
+ SSIBus *spi_bus;
+ DeviceState *flash_dev;
+ qemu_irq cs_line;
+ char bus_name[6];
+
+ snprintf(bus_name, 6, "spi%d", i);
+ spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(&s->soc), bus_name);
+
+ flash_dev = ssi_create_slave(spi_bus, "sst25wf080");
+ cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi[i]), 1, cs_line);
+ }
+
xlnx_ep108_binfo.ram_size = machine->ram_size;
xlnx_ep108_binfo.kernel_filename = machine->kernel_filename;
xlnx_ep108_binfo.kernel_cmdline = machine->kernel_cmdline;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread