* [PATCH v9 01/12] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 02/12] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
` (11 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Initial support for the Silergy SY7636A Power Management chip
and regulator.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
.../bindings/mfd/silergy,sy7636a.yaml | 79 +++++++++++++++++++
1 file changed, 79 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..0566f9498e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+ - Alistair Francis <alistair@alistair23.me>
+
+properties:
+ compatible:
+ const: silergy,sy7636a
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ '#thermal-sensor-cells':
+ const: 0
+
+ epd-pwr-good-gpios:
+ description:
+ Specifying the power good GPIOs.
+ maxItems: 1
+
+ regulators:
+ type: object
+
+ properties:
+ compatible:
+ const: silergy,sy7636a-regulator
+
+ vcom:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ regulator-name:
+ const: vcom
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@62 {
+ compatible = "silergy,sy7636a";
+ reg = <0x62>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdpmic>;
+ #thermal-sensor-cells = <0>;
+
+ regulators {
+ reg_epdpmic: vcom {
+ regulator-name = "vcom";
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+...
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 02/12] mfd: simple-mfd-i2c: Add a Kconfig name
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
2021-08-06 9:10 ` [PATCH v9 01/12] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 11:39 ` Lee Jones
2021-08-06 9:10 ` [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data Alistair Francis
` (10 subsequent siblings)
12 siblings, 1 reply; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/mfd/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6a3fd2d75f96..09a939f8b7ff 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1176,7 +1176,7 @@ config MFD_SI476X_CORE
module will be called si476x-core.
config MFD_SIMPLE_MFD_I2C
- tristate
+ tristate "Simple MFD device"
depends on I2C
select REGMAP_I2C
help
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v9 02/12] mfd: simple-mfd-i2c: Add a Kconfig name
2021-08-06 9:10 ` [PATCH v9 02/12] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
@ 2021-08-06 11:39 ` Lee Jones
2021-08-06 11:47 ` Alistair Francis
0 siblings, 1 reply; 21+ messages in thread
From: Lee Jones @ 2021-08-06 11:39 UTC (permalink / raw)
To: Alistair Francis
Cc: robh+dt, lgirdwood, broonie, linux-imx, kernel, devicetree,
linux-kernel, alistair23
On Fri, 06 Aug 2021, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> drivers/mfd/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 6a3fd2d75f96..09a939f8b7ff 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1176,7 +1176,7 @@ config MFD_SI476X_CORE
> module will be called si476x-core.
>
> config MFD_SIMPLE_MFD_I2C
> - tristate
> + tristate "Simple MFD device"
> depends on I2C
> select REGMAP_I2C
> help
For what purpose?
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v9 02/12] mfd: simple-mfd-i2c: Add a Kconfig name
2021-08-06 11:39 ` Lee Jones
@ 2021-08-06 11:47 ` Alistair Francis
0 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 11:47 UTC (permalink / raw)
To: Lee Jones
Cc: Alistair Francis, Rob Herring, lgirdwood, Mark Brown,
dl-linux-imx, Sascha Hauer, devicetree,
Linux Kernel Mailing List
On Fri, Aug 6, 2021 at 9:39 PM Lee Jones <lee.jones@linaro.org> wrote:
>
> On Fri, 06 Aug 2021, Alistair Francis wrote:
>
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > ---
> > drivers/mfd/Kconfig | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 6a3fd2d75f96..09a939f8b7ff 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1176,7 +1176,7 @@ config MFD_SI476X_CORE
> > module will be called si476x-core.
> >
> > config MFD_SIMPLE_MFD_I2C
> > - tristate
> > + tristate "Simple MFD device"
> > depends on I2C
> > select REGMAP_I2C
> > help
>
> For what purpose?
It makes it easier to enable in menuconfig. That's the main reason :)
Alistair
>
> --
> Lee Jones [李琼斯]
> Senior Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
2021-08-06 9:10 ` [PATCH v9 01/12] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-08-06 9:10 ` [PATCH v9 02/12] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 11:38 ` Lee Jones
2021-08-06 9:10 ` [PATCH v9 04/12] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
` (9 subsequent siblings)
12 siblings, 1 reply; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/mfd/simple-mfd-i2c.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 583e8c7924af..633a2b28b6cb 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -48,6 +48,8 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
if (IS_ERR(regmap))
return PTR_ERR(regmap);
+ i2c_set_clientdata(i2c, regmap);
+
/* If no MFD cells are spedified, use register the DT child nodes instead */
if (!simple_mfd_data || !simple_mfd_data->mfd_cell)
return devm_of_platform_populate(&i2c->dev);
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data
2021-08-06 9:10 ` [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data Alistair Francis
@ 2021-08-06 11:38 ` Lee Jones
2021-08-06 11:45 ` Mark Brown
0 siblings, 1 reply; 21+ messages in thread
From: Lee Jones @ 2021-08-06 11:38 UTC (permalink / raw)
To: Alistair Francis
Cc: robh+dt, lgirdwood, broonie, linux-imx, kernel, devicetree,
linux-kernel, alistair23
On Fri, 06 Aug 2021, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> drivers/mfd/simple-mfd-i2c.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
> index 583e8c7924af..633a2b28b6cb 100644
> --- a/drivers/mfd/simple-mfd-i2c.c
> +++ b/drivers/mfd/simple-mfd-i2c.c
> @@ -48,6 +48,8 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
> if (IS_ERR(regmap))
> return PTR_ERR(regmap);
>
> + i2c_set_clientdata(i2c, regmap);
> +
No need to store this here.
Just do this in the child device:
dev_get_regmap(pdev->dev.parent, NULL);
> /* If no MFD cells are spedified, use register the DT child nodes instead */
> if (!simple_mfd_data || !simple_mfd_data->mfd_cell)
> return devm_of_platform_populate(&i2c->dev);
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data
2021-08-06 11:38 ` Lee Jones
@ 2021-08-06 11:45 ` Mark Brown
2021-08-09 11:14 ` Lee Jones
0 siblings, 1 reply; 21+ messages in thread
From: Mark Brown @ 2021-08-06 11:45 UTC (permalink / raw)
To: Lee Jones
Cc: Alistair Francis, robh+dt, lgirdwood, linux-imx, kernel,
devicetree, linux-kernel, alistair23
[-- Attachment #1: Type: text/plain, Size: 537 bytes --]
On Fri, Aug 06, 2021 at 12:38:36PM +0100, Lee Jones wrote:
> On Fri, 06 Aug 2021, Alistair Francis wrote:
> > + i2c_set_clientdata(i2c, regmap);
> > +
> No need to store this here.
> Just do this in the child device:
> dev_get_regmap(pdev->dev.parent, NULL);
Note that dev_get_regmap() is relatively expensive compared to a simple
driver data reference since it needs to go search for the device to find
the regmap, it's not the end of the world especially in the context of
doing I2C I/O but storing it isn't a terrible idea.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data
2021-08-06 11:45 ` Mark Brown
@ 2021-08-09 11:14 ` Lee Jones
2021-08-10 7:03 ` Alistair Francis
0 siblings, 1 reply; 21+ messages in thread
From: Lee Jones @ 2021-08-09 11:14 UTC (permalink / raw)
To: Mark Brown
Cc: Alistair Francis, robh+dt, lgirdwood, linux-imx, kernel,
devicetree, linux-kernel, alistair23
On Fri, 06 Aug 2021, Mark Brown wrote:
> On Fri, Aug 06, 2021 at 12:38:36PM +0100, Lee Jones wrote:
> > On Fri, 06 Aug 2021, Alistair Francis wrote:
>
> > > + i2c_set_clientdata(i2c, regmap);
> > > +
>
> > No need to store this here.
>
> > Just do this in the child device:
>
> > dev_get_regmap(pdev->dev.parent, NULL);
>
> Note that dev_get_regmap() is relatively expensive compared to a simple
> driver data reference since it needs to go search for the device to find
> the regmap, it's not the end of the world especially in the context of
> doing I2C I/O but storing it isn't a terrible idea.
It would be nice if someone could do some metrics on this.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data
2021-08-09 11:14 ` Lee Jones
@ 2021-08-10 7:03 ` Alistair Francis
0 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-10 7:03 UTC (permalink / raw)
To: Lee Jones
Cc: Mark Brown, Alistair Francis, Rob Herring, lgirdwood,
dl-linux-imx, Sascha Hauer, devicetree,
Linux Kernel Mailing List
On Mon, Aug 9, 2021 at 9:14 PM Lee Jones <lee.jones@linaro.org> wrote:
>
> On Fri, 06 Aug 2021, Mark Brown wrote:
>
> > On Fri, Aug 06, 2021 at 12:38:36PM +0100, Lee Jones wrote:
> > > On Fri, 06 Aug 2021, Alistair Francis wrote:
> >
> > > > + i2c_set_clientdata(i2c, regmap);
> > > > +
> >
> > > No need to store this here.
> >
> > > Just do this in the child device:
> >
> > > dev_get_regmap(pdev->dev.parent, NULL);
> >
> > Note that dev_get_regmap() is relatively expensive compared to a simple
> > driver data reference since it needs to go search for the device to find
> > the regmap, it's not the end of the world especially in the context of
> > doing I2C I/O but storing it isn't a terrible idea.
>
> It would be nice if someone could do some metrics on this.
I updated it to use `dev_get_regmap()` in version 10 of the series
Alistair
>
> --
> Lee Jones [李琼斯]
> Senior Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v9 04/12] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (2 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 03/12] mfd: simple-mfd-i2c: Save the register client data Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 11:39 ` Lee Jones
2021-08-06 9:10 ` [PATCH v9 05/12] regulator: sy7636a: Use the regmap directly Alistair Francis
` (8 subsequent siblings)
12 siblings, 1 reply; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/mfd/simple-mfd-i2c.c | 12 +++++++++++
include/linux/mfd/sy7636a.h | 41 ++++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
create mode 100644 include/linux/mfd/sy7636a.h
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 633a2b28b6cb..5c4b6fd59fa1 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -64,8 +64,20 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
return ret;
}
+static const struct mfd_cell sy7636a_cells[] = {
+ { .name = "sy7636a-regulator", },
+ { .name = "sy7636a-temperature", },
+ { .name = "sy7636a-thermal", },
+};
+
+static const struct simple_mfd_data silergy_sy7636a = {
+ .mfd_cell = sy7636a_cells,
+ .mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
+};
+
static const struct of_device_id simple_mfd_i2c_of_match[] = {
{ .compatible = "kontron,sl28cpld" },
+ { .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
{}
};
MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
diff --git a/include/linux/mfd/sy7636a.h b/include/linux/mfd/sy7636a.h
new file mode 100644
index 000000000000..15caa54f0432
--- /dev/null
+++ b/include/linux/mfd/sy7636a.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Functions to access SY3686A power management chip.
+ *
+ * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/
+ */
+
+#ifndef __MFD_SY7636A_H
+#define __MFD_SY7636A_H
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define SY7636A_REG_OPERATION_MODE_CRL 0x00
+#define SY7636A_OPERATION_MODE_CRL_VCOMCTL BIT(6)
+#define SY7636A_OPERATION_MODE_CRL_ONOFF BIT(7)
+#define SY7636A_REG_VCOM_ADJUST_CTRL_L 0x01
+#define SY7636A_REG_VCOM_ADJUST_CTRL_H 0x02
+#define SY7636A_REG_VCOM_ADJUST_CTRL_MASK 0x01ff
+#define SY7636A_REG_VLDO_VOLTAGE_ADJULST_CTRL 0x03
+#define SY7636A_REG_POWER_ON_DELAY_TIME 0x06
+#define SY7636A_REG_FAULT_FLAG 0x07
+#define SY7636A_FAULT_FLAG_PG BIT(0)
+#define SY7636A_REG_TERMISTOR_READOUT 0x08
+
+#define SY7636A_REG_MAX 0x08
+
+#define VCOM_MIN 0
+#define VCOM_MAX 5000
+
+#define VCOM_ADJUST_CTRL_MASK 0x1ff
+// Used to shift the high byte
+#define VCOM_ADJUST_CTRL_SHIFT 8
+// Used to scale from VCOM_ADJUST_CTRL to mv
+#define VCOM_ADJUST_CTRL_SCAL 10000
+
+#define FAULT_FLAG_SHIFT 1
+
+#endif /* __LINUX_MFD_SY7636A_H */
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v9 04/12] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a
2021-08-06 9:10 ` [PATCH v9 04/12] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
@ 2021-08-06 11:39 ` Lee Jones
0 siblings, 0 replies; 21+ messages in thread
From: Lee Jones @ 2021-08-06 11:39 UTC (permalink / raw)
To: Alistair Francis
Cc: robh+dt, lgirdwood, broonie, linux-imx, kernel, devicetree,
linux-kernel, alistair23
On Fri, 06 Aug 2021, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> drivers/mfd/simple-mfd-i2c.c | 12 +++++++++++
> include/linux/mfd/sy7636a.h | 41 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 53 insertions(+)
> create mode 100644 include/linux/mfd/sy7636a.h
For my own reference (apply this as-is to your sign-off block):
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v9 05/12] regulator: sy7636a: Use the regmap directly
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (3 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 04/12] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 06/12] regulator: sy7636a: Remove requirement on sy7636a mfd Alistair Francis
` (7 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/regulator/sy7636a-regulator.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index 37bf2a3c06b7..8360b3947ead 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -14,7 +14,7 @@
#include <linux/mfd/sy7636a.h>
struct sy7636a_data {
- struct sy7636a *sy7636a;
+ struct regmap *regmap;
struct gpio_desc *pgood_gpio;
};
@@ -70,14 +70,14 @@ static const struct regulator_desc desc = {
static int sy7636a_regulator_probe(struct platform_device *pdev)
{
- struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
+ struct regmap *regmap = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
struct gpio_desc *gdp;
struct sy7636a_data *data;
int ret;
- if (!sy7636a)
+ if (!regmap)
return -EPROBE_DEFER;
gdp = devm_gpiod_get(pdev->dev.parent, "epd-pwr-good", GPIOD_IN);
@@ -90,12 +90,12 @@ static int sy7636a_regulator_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
- data->sy7636a = sy7636a;
+ data->regmap = regmap;
data->pgood_gpio = gdp;
platform_set_drvdata(pdev, data);
- ret = regmap_write(sy7636a->regmap, SY7636A_REG_POWER_ON_DELAY_TIME, 0x0);
+ ret = regmap_write(regmap, SY7636A_REG_POWER_ON_DELAY_TIME, 0x0);
if (ret) {
dev_err(pdev->dev.parent, "Failed to initialize regulator: %d\n", ret);
return ret;
@@ -103,8 +103,7 @@ static int sy7636a_regulator_probe(struct platform_device *pdev)
config.dev = &pdev->dev;
config.dev->of_node = pdev->dev.parent->of_node;
- config.driver_data = sy7636a;
- config.regmap = sy7636a->regmap;
+ config.regmap = regmap;
rdev = devm_regulator_register(&pdev->dev, &desc, &config);
if (IS_ERR(rdev)) {
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 06/12] regulator: sy7636a: Remove requirement on sy7636a mfd
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (4 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 05/12] regulator: sy7636a: Use the regmap directly Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 07/12] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
` (6 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/regulator/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 24ce9a17ab4f..54ba141d114a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1179,7 +1179,6 @@ config REGULATOR_STW481X_VMMC
config REGULATOR_SY7636A
tristate "Silergy SY7636A voltage regulator"
- depends on MFD_SY7636A
help
This driver supports Silergy SY3686A voltage regulator.
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 07/12] thermal: sy7636a: Add thermal driver for sy7636a
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (5 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 06/12] regulator: sy7636a: Remove requirement on sy7636a mfd Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 08/12] hwmon: sy7636a: Add temperature " Alistair Francis
` (5 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Add thermal driver to enable kernel based polling
and shutdown of device for temperatures out of spec
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/thermal/Kconfig | 6 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/sy7636a_thermal.c | 91 +++++++++++++++++++++++++++++++
3 files changed, 98 insertions(+)
create mode 100644 drivers/thermal/sy7636a_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index d7f44deab5b1..6ee0e7de1b37 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -450,6 +450,12 @@ depends on (ARCH_STI || ARCH_STM32) && OF
source "drivers/thermal/st/Kconfig"
endmenu
+config SY7636A_THERMAL
+ tristate "SY7636A thermal management"
+ help
+ Enable the sy7636a thermal driver, which supports the
+ temperature sensor embedded in Silabs SY7636A IC.
+
source "drivers/thermal/tegra/Kconfig"
config GENERIC_ADC_THERMAL
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 82fc3e616e54..2e1aca8a0a09 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
obj-y += intel/
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-y += st/
+obj-$(CONFIG_SY7636A_THERMAL) += sy7636a_thermal.o
obj-$(CONFIG_QCOM_TSENS) += qcom/
obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
diff --git a/drivers/thermal/sy7636a_thermal.c b/drivers/thermal/sy7636a_thermal.c
new file mode 100644
index 000000000000..4e41ae78d11c
--- /dev/null
+++ b/drivers/thermal/sy7636a_thermal.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Functions to access SY3686A power management chip temperature
+//
+// Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+//
+// Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+// Alistair Francis <alistair@alistair23.me>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static int sy7636a_get_temp(void *arg, int *res)
+{
+ unsigned int reg_val, mode_ctr;
+ int ret;
+ struct regmap *regmap = arg;
+ bool isVoltageActive;
+
+ ret = regmap_read(regmap,
+ SY7636A_REG_OPERATION_MODE_CRL, &mode_ctr);
+ if (ret)
+ return ret;
+
+ isVoltageActive = mode_ctr & SY7636A_OPERATION_MODE_CRL_ONOFF;
+
+ if (!isVoltageActive) {
+ ret = regmap_write(regmap,
+ SY7636A_REG_OPERATION_MODE_CRL,
+ mode_ctr | SY7636A_OPERATION_MODE_CRL_ONOFF);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(regmap,
+ SY7636A_REG_TERMISTOR_READOUT, ®_val);
+ if (ret)
+ return ret;
+
+ if (!isVoltageActive) {
+ ret = regmap_write(regmap,
+ SY7636A_REG_OPERATION_MODE_CRL,
+ mode_ctr);
+ if (ret)
+ return ret;
+ }
+
+ *res = reg_val * 1000;
+
+ return ret;
+}
+
+static const struct thermal_zone_of_device_ops ops = {
+ .get_temp = sy7636a_get_temp,
+};
+
+static int sy7636a_thermal_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap = dev_get_drvdata(pdev->dev.parent);
+ struct thermal_zone_device *thermal_zone_dev;
+
+ thermal_zone_dev = devm_thermal_zone_of_sensor_register(
+ pdev->dev.parent,
+ 0,
+ regmap,
+ &ops);
+
+ return PTR_ERR_OR_ZERO(thermal_zone_dev);
+}
+
+static const struct platform_device_id sy7636a_thermal_id_table[] = {
+ { "sy7636a-thermal", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_thermal_id_table);
+
+static struct platform_driver sy7636a_thermal_driver = {
+ .driver = {
+ .name = "sy7636a-thermal",
+ },
+ .probe = sy7636a_thermal_probe,
+ .id_table = sy7636a_thermal_id_table,
+};
+module_platform_driver(sy7636a_thermal_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>");
+MODULE_DESCRIPTION("SY7636A thermal driver");
+MODULE_LICENSE("GPL v2");
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 08/12] hwmon: sy7636a: Add temperature driver for sy7636a
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (6 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 07/12] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 09/12] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
` (4 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
This is a multi-function device to interface with the sy7636a
EPD PMIC chip from Silergy.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/hwmon/Kconfig | 10 ++++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/sy7636a-hwmon.c | 77 ++++++++++++++++++++++++++++
4 files changed, 89 insertions(+)
create mode 100644 drivers/hwmon/sy7636a-hwmon.c
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 477dac1edc75..ef8c6dca1277 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -229,6 +229,7 @@ CONFIG_RN5T618_POWER=m
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_SY7636A=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_CPU_THERMAL=y
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e3675377bc5d..6cae12de59cd 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1631,6 +1631,16 @@ config SENSORS_SIS5595
This driver can also be built as a module. If so, the module
will be called sis5595.
+config SENSORS_SY7636A
+ tristate "Silergy SY7636A"
+ depends on I2C
+ help
+ If you say yes here you get support for the thermistor readout of
+ the Silergy SY7636A PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called sy7636a-hwmon.
+
config SENSORS_DME1737
tristate "SMSC DME1737, SCH311x and compatibles"
depends on I2C && !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d712c61c1f5e..8b2e09e25b24 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
obj-$(CONFIG_SENSORS_STTS751) += stts751.o
+obj-$(CONFIG_SENSORS_SY7636A) += sy7636a-hwmon.o
obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
obj-$(CONFIG_SENSORS_TC74) += tc74.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
new file mode 100644
index 000000000000..0f4618e24d71
--- /dev/null
+++ b/drivers/hwmon/sy7636a-hwmon.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+ * Alistair Francis <alistair@alistair23.me>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned int reg_val;
+ int ret;
+ struct regmap *regmap = dev_get_drvdata(dev);
+
+ ret = regmap_read(regmap,
+ SY7636A_REG_TERMISTOR_READOUT, ®_val);
+ if (ret)
+ return ret;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", reg_val);
+}
+
+static SENSOR_DEVICE_ATTR(temp0, 0444, show_temp, NULL, 0);
+
+static struct attribute *sy7636a_attrs[] = {
+ &sensor_dev_attr_temp0.dev_attr.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(sy7636a);
+
+static int sy7636a_sensor_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap = dev_get_drvdata(pdev->dev.parent);
+ struct device *hwmon_dev;
+ int err;
+
+ if (!regmap)
+ return -EPROBE_DEFER;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "sy7636a_temperature", regmap, sy7636a_groups);
+
+ if (IS_ERR(hwmon_dev)) {
+ err = PTR_ERR(hwmon_dev);
+ dev_err(&pdev->dev, "Unable to register hwmon device, returned %d", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static struct platform_driver sy7636a_sensor_driver = {
+ .probe = sy7636a_sensor_probe,
+ .driver = {
+ .name = "sy7636a-temperature",
+ },
+};
+module_platform_driver(sy7636a_sensor_driver);
+
+MODULE_DESCRIPTION("SY7636A sensor driver");
+MODULE_LICENSE("GPL");
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 09/12] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (7 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 08/12] hwmon: sy7636a: Add temperature " Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 10/12] ARM: dts: imx7d: remarkable2: " Alistair Francis
` (3 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Enable the silergy,sy7636a and silergy,sy7636a-regulator for the
reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/configs/imx_v6_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index ef8c6dca1277..0ac7c61c6f3d 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -234,6 +234,7 @@ CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_CPU_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_SY7636A_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=m
@@ -249,6 +250,7 @@ CONFIG_MFD_RN5T618=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9062=y
@@ -258,6 +260,7 @@ CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_RN5T618=y
+CONFIG_REGULATOR_SY7636A=y
CONFIG_RC_CORE=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 10/12] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (8 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 09/12] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 11/12] ARM: imx_v6_v7_defconfig: Enable backlight class devices Alistair Francis
` (2 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 41 +++++++++++++++++++++++++
1 file changed, 41 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index cc33b53ae6ba..2f0c4fda38a3 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -86,6 +86,33 @@ wacom_digitizer: digitizer@9 {
};
};
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ epd_pmic: sy7636a@62 {
+ compatible = "silergy,sy7636a";
+ reg = <0x62>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdpmic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <0>;
+
+ epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ regulators {
+ reg_epdpmic: vcom {
+ regulator-name = "vcom";
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -179,6 +206,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_epdpmic: epdpmicgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
@@ -186,6 +220,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 11/12] ARM: imx_v6_v7_defconfig: Enable backlight class devices
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (9 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 10/12] ARM: dts: imx7d: remarkable2: " Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-06 9:10 ` [PATCH v9 12/12] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
2021-08-09 13:06 ` (subset) [PATCH v9 00/12] Add support for the silergy,sy7636a Mark Brown
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
The BACKLIGHT_CLASS_DEVICE config is required for the already enabled
DRM_SIMPLE_PANEL to work so let's enable BACKLIGHT_CLASS_DEVICE.
This allows the mxsfb probe to complete successfully on the reMarkable
2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0ac7c61c6f3d..486c59cdb174 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -300,6 +300,7 @@ CONFIG_FB_MODE_HELPERS=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v9 12/12] ARM: dts: imx7d: remarkable2: Enable lcdif
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (10 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 11/12] ARM: imx_v6_v7_defconfig: Enable backlight class devices Alistair Francis
@ 2021-08-06 9:10 ` Alistair Francis
2021-08-09 13:06 ` (subset) [PATCH v9 00/12] Add support for the silergy,sy7636a Mark Brown
12 siblings, 0 replies; 21+ messages in thread
From: Alistair Francis @ 2021-08-06 9:10 UTC (permalink / raw)
To: lee.jones, robh+dt, lgirdwood, broonie, linux-imx, kernel
Cc: devicetree, linux-kernel, alistair23, Alistair Francis
Connect the dispaly on the reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 74 +++++++++++++++++++++++++
1 file changed, 74 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 2f0c4fda38a3..f89945dfd541 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -47,6 +47,16 @@ reg_digitizer: regulator-digitizer {
startup-delay-us = <100000>; /* 100 ms */
};
+ reg_sdoe: regulator-sdoe {
+ compatible = "regulator-fixed";
+ regulator-name = "SDOE";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sdoe_reg>;
+ pinctrl-1 = <&pinctrl_sdoe_reg>;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -55,6 +65,16 @@ wifi_pwrseq: wifi_pwrseq {
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "ext_clock";
};
+
+ panel {
+ compatible = "eink,vb3300-kca";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&clks {
@@ -113,6 +133,20 @@ reg_epdpmic: vcom {
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ lcd-supply = <®_epdpmic>;
+ lcd2-supply = <®_sdoe>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -227,6 +261,46 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_sdoe_reg: sdoereggrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: (subset) [PATCH v9 00/12] Add support for the silergy,sy7636a
2021-08-06 9:10 [PATCH v9 00/12] Add support for the silergy,sy7636a Alistair Francis
` (11 preceding siblings ...)
2021-08-06 9:10 ` [PATCH v9 12/12] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
@ 2021-08-09 13:06 ` Mark Brown
12 siblings, 0 replies; 21+ messages in thread
From: Mark Brown @ 2021-08-09 13:06 UTC (permalink / raw)
To: robh+dt, Alistair Francis, kernel, lee.jones, linux-imx, lgirdwood
Cc: Mark Brown, devicetree, alistair23, linux-kernel
On Fri, 6 Aug 2021 19:10:46 +1000, Alistair Francis wrote:
> This series applied on top of the "mfd: simple-mfd-i2c: Add support for
> registering devices via MFD cells" patch. Once "mfd: simple-mfd-i2c: Add
> support for registering devices via MFD cells" is merged this series is
> ready to go.
>
> v9:
> - Convert to use the simple-mfd-i2c instead
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[05/12] regulator: sy7636a: Use the regmap directly
commit: 27fdd3bbb7a13830c05b6bf777e45c392cb00f63
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 21+ messages in thread