* [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields
@ 2021-10-09 11:37 Alistair Francis
2021-10-09 11:37 ` [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks Alistair Francis
2021-10-13 3:10 ` [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields Dmitry Torokhov
0 siblings, 2 replies; 8+ messages in thread
From: Alistair Francis @ 2021-10-09 11:37 UTC (permalink / raw)
To: dmitry.torokhov, linux-input, linux-kernel; +Cc: alistair, alistair23
Improve the query device fields to be more verbose.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/input/touchscreen/wacom_i2c.c | 49 ++++++++++++++++-----------
1 file changed, 30 insertions(+), 19 deletions(-)
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
index 22826c387da5..8d7267ccc661 100644
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -14,13 +14,21 @@
#include <linux/interrupt.h>
#include <asm/unaligned.h>
-#define WACOM_CMD_QUERY0 0x04
-#define WACOM_CMD_QUERY1 0x00
-#define WACOM_CMD_QUERY2 0x33
-#define WACOM_CMD_QUERY3 0x02
-#define WACOM_CMD_THROW0 0x05
-#define WACOM_CMD_THROW1 0x00
-#define WACOM_QUERY_SIZE 19
+// Registers
+#define WACOM_COMMAND_LSB 0x04
+#define WACOM_COMMAND_MSB 0x00
+
+#define WACOM_DATA_LSB 0x05
+#define WACOM_DATA_MSB 0x00
+
+// Report types
+#define REPORT_FEATURE 0x30
+
+// Requests / operations
+#define OPCODE_GET_REPORT 0x02
+
+#define WACOM_QUERY_REPORT 3
+#define WACOM_QUERY_SIZE 22
struct wacom_features {
int x_max;
@@ -41,27 +49,30 @@ static int wacom_query_device(struct i2c_client *client,
struct wacom_features *features)
{
int ret;
- u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
- WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
- u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
u8 data[WACOM_QUERY_SIZE];
+
+ u8 get_query_data_cmd[] = {
+ WACOM_COMMAND_LSB,
+ WACOM_COMMAND_MSB,
+ REPORT_FEATURE | WACOM_QUERY_REPORT,
+ OPCODE_GET_REPORT,
+ WACOM_DATA_LSB,
+ WACOM_DATA_MSB,
+ };
+
struct i2c_msg msgs[] = {
+ // Request reading of feature ReportID: 3 (Pen Query Data)
{
.addr = client->addr,
.flags = 0,
- .len = sizeof(cmd1),
- .buf = cmd1,
- },
- {
- .addr = client->addr,
- .flags = 0,
- .len = sizeof(cmd2),
- .buf = cmd2,
+ .len = sizeof(get_query_data_cmd),
+ .buf = get_query_data_cmd,
},
+ // Read 21 bytes
{
.addr = client->addr,
.flags = I2C_M_RD,
- .len = sizeof(data),
+ .len = WACOM_QUERY_SIZE - 1,
.buf = data,
},
};
--
2.31.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks
2021-10-09 11:37 [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields Alistair Francis
@ 2021-10-09 11:37 ` Alistair Francis
2021-10-13 3:55 ` Dmitry Torokhov
2021-10-13 3:10 ` [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields Dmitry Torokhov
1 sibling, 1 reply; 8+ messages in thread
From: Alistair Francis @ 2021-10-09 11:37 UTC (permalink / raw)
To: dmitry.torokhov, linux-input, linux-kernel; +Cc: alistair, alistair23
To make the code easier to read use macros for the bit masks.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
drivers/input/touchscreen/wacom_i2c.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
index 8d7267ccc661..6865342db659 100644
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -14,6 +14,12 @@
#include <linux/interrupt.h>
#include <asm/unaligned.h>
+// Bitmasks (for data[3])
+#define WACOM_TIP_SWITCH_bm (1 << 0)
+#define WACOM_BARREL_SWITCH_bm (1 << 1)
+#define WACOM_ERASER_bm (1 << 2)
+#define WACOM_BARREL_SWITCH_2_bm (1 << 4)
+
// Registers
#define WACOM_COMMAND_LSB 0x04
#define WACOM_COMMAND_MSB 0x00
@@ -110,10 +116,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
if (error < 0)
goto out;
- tsw = data[3] & 0x01;
- ers = data[3] & 0x04;
- f1 = data[3] & 0x02;
- f2 = data[3] & 0x10;
+ tsw = data[3] & WACOM_TIP_SWITCH_bm;
+ ers = data[3] & WACOM_ERASER_bm;
+ f1 = data[3] & WACOM_BARREL_SWITCH_bm;
+ f2 = data[3] & WACOM_BARREL_SWITCH_2_bm;
x = le16_to_cpup((__le16 *)&data[4]);
y = le16_to_cpup((__le16 *)&data[6]);
pressure = le16_to_cpup((__le16 *)&data[8]);
--
2.31.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks
2021-10-09 11:37 ` [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks Alistair Francis
@ 2021-10-13 3:55 ` Dmitry Torokhov
2021-10-13 13:04 ` Alistair Francis
0 siblings, 1 reply; 8+ messages in thread
From: Dmitry Torokhov @ 2021-10-13 3:55 UTC (permalink / raw)
To: Alistair Francis; +Cc: linux-input, linux-kernel, alistair23
Hi Alistair,
On Sat, Oct 09, 2021 at 09:37:07PM +1000, Alistair Francis wrote:
> To make the code easier to read use macros for the bit masks.
>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> drivers/input/touchscreen/wacom_i2c.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> index 8d7267ccc661..6865342db659 100644
> --- a/drivers/input/touchscreen/wacom_i2c.c
> +++ b/drivers/input/touchscreen/wacom_i2c.c
> @@ -14,6 +14,12 @@
> #include <linux/interrupt.h>
> #include <asm/unaligned.h>
>
> +// Bitmasks (for data[3])
> +#define WACOM_TIP_SWITCH_bm (1 << 0)
> +#define WACOM_BARREL_SWITCH_bm (1 << 1)
> +#define WACOM_ERASER_bm (1 << 2)
> +#define WACOM_BARREL_SWITCH_2_bm (1 << 4)
We have BIT() for that.
By the way, do you know what is the good name for bit 3? I see it is
being used in:
if (!wac_i2c->prox)
wac_i2c->tool = (data[3] & 0x0c) ?
BTN_TOOL_RUBBER : BTN_TOOL_PEN;
wac_i2c->prox = data[3] & WACOM_IN_PROXIMITY;
0x0c is (WACOM_ERASER | <something else>).
Also, I am a bit confused by this code, now that I look at it closer.
Are we saying that the tool type (eraser or something else) is set only
in first packet for contact/touch?
> +
> // Registers
> #define WACOM_COMMAND_LSB 0x04
> #define WACOM_COMMAND_MSB 0x00
> @@ -110,10 +116,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
> if (error < 0)
> goto out;
>
> - tsw = data[3] & 0x01;
> - ers = data[3] & 0x04;
> - f1 = data[3] & 0x02;
> - f2 = data[3] & 0x10;
> + tsw = data[3] & WACOM_TIP_SWITCH_bm;
> + ers = data[3] & WACOM_ERASER_bm;
> + f1 = data[3] & WACOM_BARREL_SWITCH_bm;
> + f2 = data[3] & WACOM_BARREL_SWITCH_2_bm;
> x = le16_to_cpup((__le16 *)&data[4]);
> y = le16_to_cpup((__le16 *)&data[6]);
> pressure = le16_to_cpup((__le16 *)&data[8]);
> --
> 2.31.1
>
How about the version of the patch below?
--
Dmitry
Input: wacom_i2c - use macros for the bit masks
From: Alistair Francis <alistair@alistair23.me>
To make the code easier to read use macros for the bit masks.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20211009113707.17568-2-alistair@alistair23.me
Patchwork-Id: 12547519
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/touchscreen/wacom_i2c.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
index 22826c387da5..d3ea9aa8a98c 100644
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -6,6 +6,7 @@
* <tobita.tatsunosuke@wacom.co.jp>
*/
+#include <linux/bits.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/i2c.h>
@@ -14,6 +15,14 @@
#include <linux/interrupt.h>
#include <asm/unaligned.h>
+// Bitmasks (for data[3])
+#define WACOM_TIP_SWITCH BIT(0)
+#define WACOM_BARREL_SWITCH BIT(1)
+#define WACOM_ERASER BIT(2)
+#define WACOM_BARREL_SWITCH_2 BIT(4)
+#define WACOM_IN_PROXIMITY BIT(5)
+
+// Registers
#define WACOM_CMD_QUERY0 0x04
#define WACOM_CMD_QUERY1 0x00
#define WACOM_CMD_QUERY2 0x33
@@ -99,10 +108,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
if (error < 0)
goto out;
- tsw = data[3] & 0x01;
- ers = data[3] & 0x04;
- f1 = data[3] & 0x02;
- f2 = data[3] & 0x10;
+ tsw = data[3] & WACOM_TIP_SWITCH;
+ ers = data[3] & WACOM_ERASER;
+ f1 = data[3] & WACOM_BARREL_SWITCH;
+ f2 = data[3] & WACOM_BARREL_SWITCH_2;
x = le16_to_cpup((__le16 *)&data[4]);
y = le16_to_cpup((__le16 *)&data[6]);
pressure = le16_to_cpup((__le16 *)&data[8]);
@@ -111,7 +120,7 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
wac_i2c->tool = (data[3] & 0x0c) ?
BTN_TOOL_RUBBER : BTN_TOOL_PEN;
- wac_i2c->prox = data[3] & 0x20;
+ wac_i2c->prox = data[3] & WACOM_IN_PROXIMITY;
input_report_key(input, BTN_TOUCH, tsw || ers);
input_report_key(input, wac_i2c->tool, wac_i2c->prox);
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks
2021-10-13 3:55 ` Dmitry Torokhov
@ 2021-10-13 13:04 ` Alistair Francis
2021-11-09 9:58 ` Alistair Francis
0 siblings, 1 reply; 8+ messages in thread
From: Alistair Francis @ 2021-10-13 13:04 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: Alistair Francis, linux-input, Linux Kernel Mailing List
On Wed, Oct 13, 2021 at 1:56 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
>
> Hi Alistair,
>
> On Sat, Oct 09, 2021 at 09:37:07PM +1000, Alistair Francis wrote:
> > To make the code easier to read use macros for the bit masks.
> >
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > ---
> > drivers/input/touchscreen/wacom_i2c.c | 14 ++++++++++----
> > 1 file changed, 10 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> > index 8d7267ccc661..6865342db659 100644
> > --- a/drivers/input/touchscreen/wacom_i2c.c
> > +++ b/drivers/input/touchscreen/wacom_i2c.c
> > @@ -14,6 +14,12 @@
> > #include <linux/interrupt.h>
> > #include <asm/unaligned.h>
> >
> > +// Bitmasks (for data[3])
> > +#define WACOM_TIP_SWITCH_bm (1 << 0)
> > +#define WACOM_BARREL_SWITCH_bm (1 << 1)
> > +#define WACOM_ERASER_bm (1 << 2)
> > +#define WACOM_BARREL_SWITCH_2_bm (1 << 4)
>
> We have BIT() for that.
>
> By the way, do you know what is the good name for bit 3? I see it is
> being used in:
I have this for bit 3:
#define WACOM_INVERT_bm (1 << 3)
>
> if (!wac_i2c->prox)
> wac_i2c->tool = (data[3] & 0x0c) ?
> BTN_TOOL_RUBBER : BTN_TOOL_PEN;
>
> wac_i2c->prox = data[3] & WACOM_IN_PROXIMITY;
>
> 0x0c is (WACOM_ERASER | <something else>).
>
> Also, I am a bit confused by this code, now that I look at it closer.
> Are we saying that the tool type (eraser or something else) is set only
> in first packet for contact/touch?
I'm not sure, you would have to check with the wacom people.
>
> > +
> > // Registers
> > #define WACOM_COMMAND_LSB 0x04
> > #define WACOM_COMMAND_MSB 0x00
> > @@ -110,10 +116,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
> > if (error < 0)
> > goto out;
> >
> > - tsw = data[3] & 0x01;
> > - ers = data[3] & 0x04;
> > - f1 = data[3] & 0x02;
> > - f2 = data[3] & 0x10;
> > + tsw = data[3] & WACOM_TIP_SWITCH_bm;
> > + ers = data[3] & WACOM_ERASER_bm;
> > + f1 = data[3] & WACOM_BARREL_SWITCH_bm;
> > + f2 = data[3] & WACOM_BARREL_SWITCH_2_bm;
> > x = le16_to_cpup((__le16 *)&data[4]);
> > y = le16_to_cpup((__le16 *)&data[6]);
> > pressure = le16_to_cpup((__le16 *)&data[8]);
> > --
> > 2.31.1
> >
>
> How about the version of the patch below?
Looks good to me!
Alistair
>
> --
> Dmitry
>
> Input: wacom_i2c - use macros for the bit masks
>
> From: Alistair Francis <alistair@alistair23.me>
>
> To make the code easier to read use macros for the bit masks.
>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> Link: https://lore.kernel.org/r/20211009113707.17568-2-alistair@alistair23.me
> Patchwork-Id: 12547519
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/touchscreen/wacom_i2c.c | 19 ++++++++++++++-----
> 1 file changed, 14 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> index 22826c387da5..d3ea9aa8a98c 100644
> --- a/drivers/input/touchscreen/wacom_i2c.c
> +++ b/drivers/input/touchscreen/wacom_i2c.c
> @@ -6,6 +6,7 @@
> * <tobita.tatsunosuke@wacom.co.jp>
> */
>
> +#include <linux/bits.h>
> #include <linux/module.h>
> #include <linux/input.h>
> #include <linux/i2c.h>
> @@ -14,6 +15,14 @@
> #include <linux/interrupt.h>
> #include <asm/unaligned.h>
>
> +// Bitmasks (for data[3])
> +#define WACOM_TIP_SWITCH BIT(0)
> +#define WACOM_BARREL_SWITCH BIT(1)
> +#define WACOM_ERASER BIT(2)
> +#define WACOM_BARREL_SWITCH_2 BIT(4)
> +#define WACOM_IN_PROXIMITY BIT(5)
> +
> +// Registers
> #define WACOM_CMD_QUERY0 0x04
> #define WACOM_CMD_QUERY1 0x00
> #define WACOM_CMD_QUERY2 0x33
> @@ -99,10 +108,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
> if (error < 0)
> goto out;
>
> - tsw = data[3] & 0x01;
> - ers = data[3] & 0x04;
> - f1 = data[3] & 0x02;
> - f2 = data[3] & 0x10;
> + tsw = data[3] & WACOM_TIP_SWITCH;
> + ers = data[3] & WACOM_ERASER;
> + f1 = data[3] & WACOM_BARREL_SWITCH;
> + f2 = data[3] & WACOM_BARREL_SWITCH_2;
> x = le16_to_cpup((__le16 *)&data[4]);
> y = le16_to_cpup((__le16 *)&data[6]);
> pressure = le16_to_cpup((__le16 *)&data[8]);
> @@ -111,7 +120,7 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
> wac_i2c->tool = (data[3] & 0x0c) ?
> BTN_TOOL_RUBBER : BTN_TOOL_PEN;
>
> - wac_i2c->prox = data[3] & 0x20;
> + wac_i2c->prox = data[3] & WACOM_IN_PROXIMITY;
>
> input_report_key(input, BTN_TOUCH, tsw || ers);
> input_report_key(input, wac_i2c->tool, wac_i2c->prox);
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks
2021-10-13 13:04 ` Alistair Francis
@ 2021-11-09 9:58 ` Alistair Francis
2021-11-10 6:54 ` Dmitry Torokhov
0 siblings, 1 reply; 8+ messages in thread
From: Alistair Francis @ 2021-11-09 9:58 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: Alistair Francis, linux-input, Linux Kernel Mailing List
On Wed, Oct 13, 2021 at 11:04 PM Alistair Francis <alistair23@gmail.com> wrote:
>
> On Wed, Oct 13, 2021 at 1:56 PM Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
> >
> > Hi Alistair,
> >
> > On Sat, Oct 09, 2021 at 09:37:07PM +1000, Alistair Francis wrote:
> > > To make the code easier to read use macros for the bit masks.
> > >
> > > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > > ---
> > > drivers/input/touchscreen/wacom_i2c.c | 14 ++++++++++----
> > > 1 file changed, 10 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> > > index 8d7267ccc661..6865342db659 100644
> > > --- a/drivers/input/touchscreen/wacom_i2c.c
> > > +++ b/drivers/input/touchscreen/wacom_i2c.c
> > > @@ -14,6 +14,12 @@
> > > #include <linux/interrupt.h>
> > > #include <asm/unaligned.h>
> > >
> > > +// Bitmasks (for data[3])
> > > +#define WACOM_TIP_SWITCH_bm (1 << 0)
> > > +#define WACOM_BARREL_SWITCH_bm (1 << 1)
> > > +#define WACOM_ERASER_bm (1 << 2)
> > > +#define WACOM_BARREL_SWITCH_2_bm (1 << 4)
> >
> > We have BIT() for that.
> >
> > By the way, do you know what is the good name for bit 3? I see it is
> > being used in:
>
> I have this for bit 3:
>
> #define WACOM_INVERT_bm (1 << 3)
>
>
> >
> > if (!wac_i2c->prox)
> > wac_i2c->tool = (data[3] & 0x0c) ?
> > BTN_TOOL_RUBBER : BTN_TOOL_PEN;
> >
> > wac_i2c->prox = data[3] & WACOM_IN_PROXIMITY;
> >
> > 0x0c is (WACOM_ERASER | <something else>).
> >
> > Also, I am a bit confused by this code, now that I look at it closer.
> > Are we saying that the tool type (eraser or something else) is set only
> > in first packet for contact/touch?
>
> I'm not sure, you would have to check with the wacom people.
>
> >
> > > +
> > > // Registers
> > > #define WACOM_COMMAND_LSB 0x04
> > > #define WACOM_COMMAND_MSB 0x00
> > > @@ -110,10 +116,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
> > > if (error < 0)
> > > goto out;
> > >
> > > - tsw = data[3] & 0x01;
> > > - ers = data[3] & 0x04;
> > > - f1 = data[3] & 0x02;
> > > - f2 = data[3] & 0x10;
> > > + tsw = data[3] & WACOM_TIP_SWITCH_bm;
> > > + ers = data[3] & WACOM_ERASER_bm;
> > > + f1 = data[3] & WACOM_BARREL_SWITCH_bm;
> > > + f2 = data[3] & WACOM_BARREL_SWITCH_2_bm;
> > > x = le16_to_cpup((__le16 *)&data[4]);
> > > y = le16_to_cpup((__le16 *)&data[6]);
> > > pressure = le16_to_cpup((__le16 *)&data[8]);
> > > --
> > > 2.31.1
> > >
> >
> > How about the version of the patch below?
>
> Looks good to me!
>
> Alistair
>
> >
> > --
> > Dmitry
> >
> > Input: wacom_i2c - use macros for the bit masks
> >
> > From: Alistair Francis <alistair@alistair23.me>
> >
> > To make the code easier to read use macros for the bit masks.
> >
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > Link: https://lore.kernel.org/r/20211009113707.17568-2-alistair@alistair23.me
> > Patchwork-Id: 12547519
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I'm assuming you don't need me to re-send this. Let me know if you
want me to though.
Alistair
> > ---
> > drivers/input/touchscreen/wacom_i2c.c | 19 ++++++++++++++-----
> > 1 file changed, 14 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> > index 22826c387da5..d3ea9aa8a98c 100644
> > --- a/drivers/input/touchscreen/wacom_i2c.c
> > +++ b/drivers/input/touchscreen/wacom_i2c.c
> > @@ -6,6 +6,7 @@
> > * <tobita.tatsunosuke@wacom.co.jp>
> > */
> >
> > +#include <linux/bits.h>
> > #include <linux/module.h>
> > #include <linux/input.h>
> > #include <linux/i2c.h>
> > @@ -14,6 +15,14 @@
> > #include <linux/interrupt.h>
> > #include <asm/unaligned.h>
> >
> > +// Bitmasks (for data[3])
> > +#define WACOM_TIP_SWITCH BIT(0)
> > +#define WACOM_BARREL_SWITCH BIT(1)
> > +#define WACOM_ERASER BIT(2)
> > +#define WACOM_BARREL_SWITCH_2 BIT(4)
> > +#define WACOM_IN_PROXIMITY BIT(5)
> > +
> > +// Registers
> > #define WACOM_CMD_QUERY0 0x04
> > #define WACOM_CMD_QUERY1 0x00
> > #define WACOM_CMD_QUERY2 0x33
> > @@ -99,10 +108,10 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
> > if (error < 0)
> > goto out;
> >
> > - tsw = data[3] & 0x01;
> > - ers = data[3] & 0x04;
> > - f1 = data[3] & 0x02;
> > - f2 = data[3] & 0x10;
> > + tsw = data[3] & WACOM_TIP_SWITCH;
> > + ers = data[3] & WACOM_ERASER;
> > + f1 = data[3] & WACOM_BARREL_SWITCH;
> > + f2 = data[3] & WACOM_BARREL_SWITCH_2;
> > x = le16_to_cpup((__le16 *)&data[4]);
> > y = le16_to_cpup((__le16 *)&data[6]);
> > pressure = le16_to_cpup((__le16 *)&data[8]);
> > @@ -111,7 +120,7 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
> > wac_i2c->tool = (data[3] & 0x0c) ?
> > BTN_TOOL_RUBBER : BTN_TOOL_PEN;
> >
> > - wac_i2c->prox = data[3] & 0x20;
> > + wac_i2c->prox = data[3] & WACOM_IN_PROXIMITY;
> >
> > input_report_key(input, BTN_TOUCH, tsw || ers);
> > input_report_key(input, wac_i2c->tool, wac_i2c->prox);
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields
2021-10-09 11:37 [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields Alistair Francis
2021-10-09 11:37 ` [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks Alistair Francis
@ 2021-10-13 3:10 ` Dmitry Torokhov
2021-10-13 13:05 ` Alistair Francis
1 sibling, 1 reply; 8+ messages in thread
From: Dmitry Torokhov @ 2021-10-13 3:10 UTC (permalink / raw)
To: Alistair Francis; +Cc: linux-input, linux-kernel, alistair23
Hi Alistair,
On Sat, Oct 09, 2021 at 09:37:06PM +1000, Alistair Francis wrote:
> Improve the query device fields to be more verbose.
>
> Signed-off-by: Alistair Francis <alistair@alistair23.me>
> ---
> drivers/input/touchscreen/wacom_i2c.c | 49 ++++++++++++++++-----------
> 1 file changed, 30 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> index 22826c387da5..8d7267ccc661 100644
> --- a/drivers/input/touchscreen/wacom_i2c.c
> +++ b/drivers/input/touchscreen/wacom_i2c.c
> @@ -14,13 +14,21 @@
> #include <linux/interrupt.h>
> #include <asm/unaligned.h>
>
> -#define WACOM_CMD_QUERY0 0x04
> -#define WACOM_CMD_QUERY1 0x00
> -#define WACOM_CMD_QUERY2 0x33
> -#define WACOM_CMD_QUERY3 0x02
> -#define WACOM_CMD_THROW0 0x05
> -#define WACOM_CMD_THROW1 0x00
> -#define WACOM_QUERY_SIZE 19
> +// Registers
> +#define WACOM_COMMAND_LSB 0x04
> +#define WACOM_COMMAND_MSB 0x00
> +
> +#define WACOM_DATA_LSB 0x05
> +#define WACOM_DATA_MSB 0x00
> +
> +// Report types
> +#define REPORT_FEATURE 0x30
> +
> +// Requests / operations
> +#define OPCODE_GET_REPORT 0x02
> +
> +#define WACOM_QUERY_REPORT 3
> +#define WACOM_QUERY_SIZE 22
>
> struct wacom_features {
> int x_max;
> @@ -41,27 +49,30 @@ static int wacom_query_device(struct i2c_client *client,
> struct wacom_features *features)
> {
> int ret;
> - u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
> - WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
> - u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
> u8 data[WACOM_QUERY_SIZE];
> +
> + u8 get_query_data_cmd[] = {
> + WACOM_COMMAND_LSB,
> + WACOM_COMMAND_MSB,
> + REPORT_FEATURE | WACOM_QUERY_REPORT,
> + OPCODE_GET_REPORT,
> + WACOM_DATA_LSB,
> + WACOM_DATA_MSB,
> + };
> +
> struct i2c_msg msgs[] = {
> + // Request reading of feature ReportID: 3 (Pen Query Data)
> {
> .addr = client->addr,
> .flags = 0,
> - .len = sizeof(cmd1),
> - .buf = cmd1,
> - },
> - {
> - .addr = client->addr,
> - .flags = 0,
> - .len = sizeof(cmd2),
> - .buf = cmd2,
> + .len = sizeof(get_query_data_cmd),
> + .buf = get_query_data_cmd,
> },
> + // Read 21 bytes
> {
> .addr = client->addr,
> .flags = I2C_M_RD,
> - .len = sizeof(data),
> + .len = WACOM_QUERY_SIZE - 1,
Why is this change? If we are indeed supposed to read 1 byte less this
should be a separate patch.
> .buf = data,
> },
> };
> --
> 2.31.1
>
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields
2021-10-13 3:10 ` [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields Dmitry Torokhov
@ 2021-10-13 13:05 ` Alistair Francis
0 siblings, 0 replies; 8+ messages in thread
From: Alistair Francis @ 2021-10-13 13:05 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: Alistair Francis, linux-input, Linux Kernel Mailing List
On Wed, Oct 13, 2021 at 1:10 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
>
> Hi Alistair,
>
> On Sat, Oct 09, 2021 at 09:37:06PM +1000, Alistair Francis wrote:
> > Improve the query device fields to be more verbose.
> >
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > ---
> > drivers/input/touchscreen/wacom_i2c.c | 49 ++++++++++++++++-----------
> > 1 file changed, 30 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> > index 22826c387da5..8d7267ccc661 100644
> > --- a/drivers/input/touchscreen/wacom_i2c.c
> > +++ b/drivers/input/touchscreen/wacom_i2c.c
> > @@ -14,13 +14,21 @@
> > #include <linux/interrupt.h>
> > #include <asm/unaligned.h>
> >
> > -#define WACOM_CMD_QUERY0 0x04
> > -#define WACOM_CMD_QUERY1 0x00
> > -#define WACOM_CMD_QUERY2 0x33
> > -#define WACOM_CMD_QUERY3 0x02
> > -#define WACOM_CMD_THROW0 0x05
> > -#define WACOM_CMD_THROW1 0x00
> > -#define WACOM_QUERY_SIZE 19
> > +// Registers
> > +#define WACOM_COMMAND_LSB 0x04
> > +#define WACOM_COMMAND_MSB 0x00
> > +
> > +#define WACOM_DATA_LSB 0x05
> > +#define WACOM_DATA_MSB 0x00
> > +
> > +// Report types
> > +#define REPORT_FEATURE 0x30
> > +
> > +// Requests / operations
> > +#define OPCODE_GET_REPORT 0x02
> > +
> > +#define WACOM_QUERY_REPORT 3
> > +#define WACOM_QUERY_SIZE 22
> >
> > struct wacom_features {
> > int x_max;
> > @@ -41,27 +49,30 @@ static int wacom_query_device(struct i2c_client *client,
> > struct wacom_features *features)
> > {
> > int ret;
> > - u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
> > - WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
> > - u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
> > u8 data[WACOM_QUERY_SIZE];
> > +
> > + u8 get_query_data_cmd[] = {
> > + WACOM_COMMAND_LSB,
> > + WACOM_COMMAND_MSB,
> > + REPORT_FEATURE | WACOM_QUERY_REPORT,
> > + OPCODE_GET_REPORT,
> > + WACOM_DATA_LSB,
> > + WACOM_DATA_MSB,
> > + };
> > +
> > struct i2c_msg msgs[] = {
> > + // Request reading of feature ReportID: 3 (Pen Query Data)
> > {
> > .addr = client->addr,
> > .flags = 0,
> > - .len = sizeof(cmd1),
> > - .buf = cmd1,
> > - },
> > - {
> > - .addr = client->addr,
> > - .flags = 0,
> > - .len = sizeof(cmd2),
> > - .buf = cmd2,
> > + .len = sizeof(get_query_data_cmd),
> > + .buf = get_query_data_cmd,
> > },
> > + // Read 21 bytes
> > {
> > .addr = client->addr,
> > .flags = I2C_M_RD,
> > - .len = sizeof(data),
> > + .len = WACOM_QUERY_SIZE - 1,
>
> Why is this change? If we are indeed supposed to read 1 byte less this
> should be a separate patch.
It shouldn't be a change, we are still reading 21 bytes of data. We
are just using a macro instead of sizeof().
Alistair
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-11-10 6:54 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-09 11:37 [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields Alistair Francis
2021-10-09 11:37 ` [PATCH 2/2] Input: wacom_i2c - Use macros for the bit masks Alistair Francis
2021-10-13 3:55 ` Dmitry Torokhov
2021-10-13 13:04 ` Alistair Francis
2021-11-09 9:58 ` Alistair Francis
2021-11-10 6:54 ` Dmitry Torokhov
2021-10-13 3:10 ` [PATCH 1/2] Input: wacom_i2c - Clean up the query device fields Dmitry Torokhov
2021-10-13 13:05 ` Alistair Francis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.