* [PATCH 0/3] Patch set fixing SPEAr13xx boot issues on V3.8-rc6
@ 2013-02-08 10:46 Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
` (2 more replies)
0 siblings, 3 replies; 17+ messages in thread
From: Vijay Kumar Mishra @ 2013-02-08 10:46 UTC (permalink / raw)
To: linux, linux-arm-kernel, linux-kernel
Cc: spear-devel, viresh.kumar, Vijay Kumar Mishra
This patch set contains following patches:
1. Enables correct kernel/user memory split required for SPEAr13xx.
2. Fix to correct SPEAr1310 device tree.
3. Fix to add ARM ABI support.
This patch set is tested on kernel V3.8-rc6.
Vijay Kumar Mishra (3):
SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
ARM:dts:SPEAr1310:Correct the clcd pin group name
SPEAr13xx_defconfig: Enable compilation using the latest ARM ABI
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
arch/arm/configs/spear13xx_defconfig | 5 ++---
2 files changed, 3 insertions(+), 4 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
2013-02-08 10:46 [PATCH 0/3] Patch set fixing SPEAr13xx boot issues on V3.8-rc6 Vijay Kumar Mishra
@ 2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2 siblings, 0 replies; 17+ messages in thread
From: Vijay Kumar Mishra @ 2013-02-08 10:46 UTC (permalink / raw)
To: linux, linux-arm-kernel, linux-kernel
Cc: spear-devel, viresh.kumar, Vijay Kumar Mishra
Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
Before enabling this option the boot was hanging at uncompressing linux.
---
arch/arm/configs/spear13xx_defconfig | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 1fdb826..1b5ceff 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -14,13 +14,13 @@ CONFIG_MACH_SPEAR1340=y
CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_VMSPLIT_2G=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
@@ -62,9 +62,7 @@ CONFIG_GPIO_PL061=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_MPCORE_WATCHDOG=y
-# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
@ 2013-02-08 10:46 ` Vijay Kumar Mishra
0 siblings, 0 replies; 17+ messages in thread
From: Vijay Kumar Mishra @ 2013-02-08 10:46 UTC (permalink / raw)
To: linux-arm-kernel
Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
Before enabling this option the boot was hanging at uncompressing linux.
---
arch/arm/configs/spear13xx_defconfig | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 1fdb826..1b5ceff 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -14,13 +14,13 @@ CONFIG_MACH_SPEAR1340=y
CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_VMSPLIT_2G=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
@@ -62,9 +62,7 @@ CONFIG_GPIO_PL061=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_MPCORE_WATCHDOG=y
-# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_MMC=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
2013-02-08 10:46 ` Vijay Kumar Mishra
@ 2013-02-08 10:50 ` Viresh Kumar
-1 siblings, 0 replies; 17+ messages in thread
From: Viresh Kumar @ 2013-02-08 10:50 UTC (permalink / raw)
To: Vijay Kumar Mishra; +Cc: linux, linux-arm-kernel, linux-kernel, spear-devel
Hi Vijay,
By mistake you have added an ST internal list in cc, fixed it now.
Subject should be:
ARM: SPEAr13xx: Enable 2G/2G Memory split in defconfig
On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
> Before enabling this option the boot was hanging at uncompressing linux.
> ---
> arch/arm/configs/spear13xx_defconfig | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
> index 1fdb826..1b5ceff 100644
> --- a/arch/arm/configs/spear13xx_defconfig
> +++ b/arch/arm/configs/spear13xx_defconfig
> @@ -14,13 +14,13 @@ CONFIG_MACH_SPEAR1340=y
> CONFIG_SMP=y
> # CONFIG_SMP_ON_UP is not set
> # CONFIG_ARM_CPU_TOPOLOGY is not set
> +CONFIG_VMSPLIT_2G=y
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_BINFMT_MISC=y
> CONFIG_NET=y
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_MTD=y
> -CONFIG_MTD_OF_PARTS=y
> -# CONFIG_HID_SUPPORT is not set
> -# CONFIG_USB_DEVICE_CLASS is not set
Unrelated chages. Don't get them in next time. In case they
just got added automatically because you did and make savedefconfig,
do a make savedefconfig before any of these patches to make things
stable for all SPEAr SoCs. And then add these patches.
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
@ 2013-02-08 10:50 ` Viresh Kumar
0 siblings, 0 replies; 17+ messages in thread
From: Viresh Kumar @ 2013-02-08 10:50 UTC (permalink / raw)
To: linux-arm-kernel
Hi Vijay,
By mistake you have added an ST internal list in cc, fixed it now.
Subject should be:
ARM: SPEAr13xx: Enable 2G/2G Memory split in defconfig
On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
> Before enabling this option the boot was hanging at uncompressing linux.
> ---
> arch/arm/configs/spear13xx_defconfig | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
> index 1fdb826..1b5ceff 100644
> --- a/arch/arm/configs/spear13xx_defconfig
> +++ b/arch/arm/configs/spear13xx_defconfig
> @@ -14,13 +14,13 @@ CONFIG_MACH_SPEAR1340=y
> CONFIG_SMP=y
> # CONFIG_SMP_ON_UP is not set
> # CONFIG_ARM_CPU_TOPOLOGY is not set
> +CONFIG_VMSPLIT_2G=y
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_BINFMT_MISC=y
> CONFIG_NET=y
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_MTD=y
> -CONFIG_MTD_OF_PARTS=y
> -# CONFIG_HID_SUPPORT is not set
> -# CONFIG_USB_DEVICE_CLASS is not set
Unrelated chages. Don't get them in next time. In case they
just got added automatically because you did and make savedefconfig,
do a make savedefconfig before any of these patches to make things
stable for all SPEAr SoCs. And then add these patches.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
2013-02-08 10:50 ` Viresh Kumar
@ 2013-02-08 17:49 ` Nicolas Pitre
-1 siblings, 0 replies; 17+ messages in thread
From: Nicolas Pitre @ 2013-02-08 17:49 UTC (permalink / raw)
To: Viresh Kumar
Cc: Vijay Kumar Mishra, linux, linux-arm-kernel, linux-kernel, spear-devel
On Fri, 8 Feb 2013, Viresh Kumar wrote:
> Hi Vijay,
>
> By mistake you have added an ST internal list in cc, fixed it now.
>
> Subject should be:
>
> ARM: SPEAr13xx: Enable 2G/2G Memory split in defconfig
>
> On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> > Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
> > Before enabling this option the boot was hanging at uncompressing linux.
I disagree. The subject could have been "put our head in the sand and
paper over bugs".
Please don't do that. There is no reason for any machine not to boot
way past "Uncompressing Linux" with the default split. The likely
reason it works with the 2G:2G split is because in that case the virtual
and physical RAM addresses in the kernel are the same, and therefore
missing p2v or v2p conversions are invisible.
Nicolas
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
@ 2013-02-08 17:49 ` Nicolas Pitre
0 siblings, 0 replies; 17+ messages in thread
From: Nicolas Pitre @ 2013-02-08 17:49 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 8 Feb 2013, Viresh Kumar wrote:
> Hi Vijay,
>
> By mistake you have added an ST internal list in cc, fixed it now.
>
> Subject should be:
>
> ARM: SPEAr13xx: Enable 2G/2G Memory split in defconfig
>
> On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> > Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
> > Before enabling this option the boot was hanging at uncompressing linux.
I disagree. The subject could have been "put our head in the sand and
paper over bugs".
Please don't do that. There is no reason for any machine not to boot
way past "Uncompressing Linux" with the default split. The likely
reason it works with the 2G:2G split is because in that case the virtual
and physical RAM addresses in the kernel are the same, and therefore
missing p2v or v2p conversions are invisible.
Nicolas
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
2013-02-08 17:49 ` Nicolas Pitre
@ 2013-02-11 3:50 ` Shiraz Hashim
-1 siblings, 0 replies; 17+ messages in thread
From: Shiraz Hashim @ 2013-02-11 3:50 UTC (permalink / raw)
To: Nicolas Pitre, Vijay Kumar Mishra
Cc: Viresh Kumar, linux, linux-arm-kernel, linux-kernel, spear-devel
Hi Nicolas,
On Fri, Feb 08, 2013 at 12:49:22PM -0500, Nicolas Pitre wrote:
> On Fri, 8 Feb 2013, Viresh Kumar wrote:
> >
> > By mistake you have added an ST internal list in cc, fixed it now.
> >
> > Subject should be:
> >
> > ARM: SPEAr13xx: Enable 2G/2G Memory split in defconfig
> >
> > On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> > > Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
> > > Before enabling this option the boot was hanging at uncompressing linux.
>
> I disagree. The subject could have been "put our head in the sand and
> paper over bugs".
>
> Please don't do that. There is no reason for any machine not to boot
> way past "Uncompressing Linux" with the default split. The likely
> reason it works with the 2G:2G split is because in that case the virtual
> and physical RAM addresses in the kernel are the same, and therefore
> missing p2v or v2p conversions are invisible.
I agree. Actually the details are misleading. SPEAr13xx chose this
option just for its own preference over high memory support.
@Vijay,
I think you should drop this patch and just enable high memory support
rather, if SPEAr13xx doesn't have any problem with that.
--
regards
Shiraz
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed
@ 2013-02-11 3:50 ` Shiraz Hashim
0 siblings, 0 replies; 17+ messages in thread
From: Shiraz Hashim @ 2013-02-11 3:50 UTC (permalink / raw)
To: linux-arm-kernel
Hi Nicolas,
On Fri, Feb 08, 2013 at 12:49:22PM -0500, Nicolas Pitre wrote:
> On Fri, 8 Feb 2013, Viresh Kumar wrote:
> >
> > By mistake you have added an ST internal list in cc, fixed it now.
> >
> > Subject should be:
> >
> > ARM: SPEAr13xx: Enable 2G/2G Memory split in defconfig
> >
> > On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> > > Memory split 2G/2G is enabled as needed for SPEAr1310 RevC board to boot.
> > > Before enabling this option the boot was hanging at uncompressing linux.
>
> I disagree. The subject could have been "put our head in the sand and
> paper over bugs".
>
> Please don't do that. There is no reason for any machine not to boot
> way past "Uncompressing Linux" with the default split. The likely
> reason it works with the 2G:2G split is because in that case the virtual
> and physical RAM addresses in the kernel are the same, and therefore
> missing p2v or v2p conversions are invisible.
I agree. Actually the details are misleading. SPEAr13xx chose this
option just for its own preference over high memory support.
@Vijay,
I think you should drop this patch and just enable high memory support
rather, if SPEAr13xx doesn't have any problem with that.
--
regards
Shiraz
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 2/3] ARM:dts:SPEAr1310:Correct the clcd pin group name
2013-02-08 10:46 [PATCH 0/3] Patch set fixing SPEAr13xx boot issues on V3.8-rc6 Vijay Kumar Mishra
@ 2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2 siblings, 0 replies; 17+ messages in thread
From: Vijay Kumar Mishra @ 2013-02-08 10:46 UTC (permalink / raw)
To: linux, linux-arm-kernel, linux-kernel
Cc: spear-devel, viresh.kumar, Vijay Kumar Mishra
This patch is to correct clcd pin group name "clcd_high_res" to
"clcd_high_res_grp" to avoid kernel boot hang as with following error message.
spear1310-pinmux e0700000.pinmux: invalid group "clcd_high_res" for function
"clcd".
---
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index b56a801..6fd4c36 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -47,7 +47,7 @@
st,function = "arm_gpio";
};
clcd {
- st,pins = "clcd_grp" , "clcd_high_res";
+ st,pins = "clcd_grp", "clcd_high_res_grp";
st,function = "clcd";
};
eth {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 2/3] ARM:dts:SPEAr1310:Correct the clcd pin group name
@ 2013-02-08 10:46 ` Vijay Kumar Mishra
0 siblings, 0 replies; 17+ messages in thread
From: Vijay Kumar Mishra @ 2013-02-08 10:46 UTC (permalink / raw)
To: linux-arm-kernel
This patch is to correct clcd pin group name "clcd_high_res" to
"clcd_high_res_grp" to avoid kernel boot hang as with following error message.
spear1310-pinmux e0700000.pinmux: invalid group "clcd_high_res" for function
"clcd".
---
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index b56a801..6fd4c36 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -47,7 +47,7 @@
st,function = "arm_gpio";
};
clcd {
- st,pins = "clcd_grp" , "clcd_high_res";
+ st,pins = "clcd_grp", "clcd_high_res_grp";
st,function = "clcd";
};
eth {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 2/3] ARM:dts:SPEAr1310:Correct the clcd pin group name
2013-02-08 10:46 ` Vijay Kumar Mishra
@ 2013-02-08 10:53 ` Viresh Kumar
-1 siblings, 0 replies; 17+ messages in thread
From: Viresh Kumar @ 2013-02-08 10:53 UTC (permalink / raw)
To: Vijay Kumar Mishra; +Cc: linux, linux-arm-kernel, linux-kernel, spear-devel
Remove "the" from subject.
On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> This patch is to correct clcd pin group name "clcd_high_res" to
> "clcd_high_res_grp" to avoid kernel boot hang as with following error message.
>
> spear1310-pinmux e0700000.pinmux: invalid group "clcd_high_res" for function
> "clcd".
Write it as:
Incorrect pin group name "clcd_high_res" is passed from DT, which causes boot
failure. Fix it by replacing it with "clcd_high_res_grp".
> ---
> arch/arm/boot/dts/spear1310-evb.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
> index b56a801..6fd4c36 100644
> --- a/arch/arm/boot/dts/spear1310-evb.dts
> +++ b/arch/arm/boot/dts/spear1310-evb.dts
> @@ -47,7 +47,7 @@
> st,function = "arm_gpio";
> };
> clcd {
> - st,pins = "clcd_grp" , "clcd_high_res";
> + st,pins = "clcd_grp", "clcd_high_res_grp";
> st,function = "clcd";
> };
> eth {
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 2/3] ARM:dts:SPEAr1310:Correct the clcd pin group name
@ 2013-02-08 10:53 ` Viresh Kumar
0 siblings, 0 replies; 17+ messages in thread
From: Viresh Kumar @ 2013-02-08 10:53 UTC (permalink / raw)
To: linux-arm-kernel
Remove "the" from subject.
On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> This patch is to correct clcd pin group name "clcd_high_res" to
> "clcd_high_res_grp" to avoid kernel boot hang as with following error message.
>
> spear1310-pinmux e0700000.pinmux: invalid group "clcd_high_res" for function
> "clcd".
Write it as:
Incorrect pin group name "clcd_high_res" is passed from DT, which causes boot
failure. Fix it by replacing it with "clcd_high_res_grp".
> ---
> arch/arm/boot/dts/spear1310-evb.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
> index b56a801..6fd4c36 100644
> --- a/arch/arm/boot/dts/spear1310-evb.dts
> +++ b/arch/arm/boot/dts/spear1310-evb.dts
> @@ -47,7 +47,7 @@
> st,function = "arm_gpio";
> };
> clcd {
> - st,pins = "clcd_grp" , "clcd_high_res";
> + st,pins = "clcd_grp", "clcd_high_res_grp";
> st,function = "clcd";
> };
> eth {
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 3/3] SPEAr13xx_defconfig: Enable compilation using the latest
2013-02-08 10:46 [PATCH 0/3] Patch set fixing SPEAr13xx boot issues on V3.8-rc6 Vijay Kumar Mishra
@ 2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2 siblings, 0 replies; 17+ messages in thread
From: Vijay Kumar Mishra @ 2013-02-08 10:46 UTC (permalink / raw)
To: linux, linux-arm-kernel, linux-kernel
Cc: spear-devel, viresh.kumar, Vijay Kumar Mishra
This Patch is to enable CONFIG_AEABI option in kernel. Which basically adds
support for latest ARMABI (EABI).
It also include support for changes the kernel syscall calling convention to
disambiguate both ABIs and allow for backward compatibility support.
Without this option the kernel crashes. Crash log is below:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
Exception stack(0xbf873f64 to 0xbf873fac)
3f60: 00000020 804725b4 00000001 00000000 bf872000 80498684 803308bc
3f80: 80474fe8 bf872000 412fc091 00000000 bf873fb8 bf873fbc bf873fac 80009c50
3fa0: 80009c54 60000113 ffffffff
r7:bf873f98 r6:ffffffff r5:60000113 r4:80009c54
[<80009c24>] (default_idle+0x0/0x38) from [<80009e24>] (cpu_idle+0xac/0xf0)
[<80009d78>] (cpu_idle+0x0/0xf0) from [<803277ec>]
(secondary_start_kernel+0xec/0x10c)
r8:0000406a r7:80498950 r6:10c03c7d r5:00000001 r4:80478bd0
[<80327700>] (secondary_start_kernel+0x0/0x10c) from [<00326dc8>] (0x326dc8)
r5:0
---
arch/arm/configs/spear13xx_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 1b5ceff..4e2866d 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -15,6 +15,7 @@ CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_VMSPLIT_2G=y
+CONFIG_AEABI=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_BINFMT_MISC=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 3/3] SPEAr13xx_defconfig: Enable compilation using the latest
@ 2013-02-08 10:46 ` Vijay Kumar Mishra
0 siblings, 0 replies; 17+ messages in thread
From: Vijay Kumar Mishra @ 2013-02-08 10:46 UTC (permalink / raw)
To: linux-arm-kernel
This Patch is to enable CONFIG_AEABI option in kernel. Which basically adds
support for latest ARMABI (EABI).
It also include support for changes the kernel syscall calling convention to
disambiguate both ABIs and allow for backward compatibility support.
Without this option the kernel crashes. Crash log is below:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
Exception stack(0xbf873f64 to 0xbf873fac)
3f60: 00000020 804725b4 00000001 00000000 bf872000 80498684 803308bc
3f80: 80474fe8 bf872000 412fc091 00000000 bf873fb8 bf873fbc bf873fac 80009c50
3fa0: 80009c54 60000113 ffffffff
r7:bf873f98 r6:ffffffff r5:60000113 r4:80009c54
[<80009c24>] (default_idle+0x0/0x38) from [<80009e24>] (cpu_idle+0xac/0xf0)
[<80009d78>] (cpu_idle+0x0/0xf0) from [<803277ec>]
(secondary_start_kernel+0xec/0x10c)
r8:0000406a r7:80498950 r6:10c03c7d r5:00000001 r4:80478bd0
[<80327700>] (secondary_start_kernel+0x0/0x10c) from [<00326dc8>] (0x326dc8)
r5:0
---
arch/arm/configs/spear13xx_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 1b5ceff..4e2866d 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -15,6 +15,7 @@ CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_VMSPLIT_2G=y
+CONFIG_AEABI=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_BINFMT_MISC=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 3/3] SPEAr13xx_defconfig: Enable compilation using the latest
2013-02-08 10:46 ` Vijay Kumar Mishra
@ 2013-02-08 10:55 ` Viresh Kumar
-1 siblings, 0 replies; 17+ messages in thread
From: Viresh Kumar @ 2013-02-08 10:55 UTC (permalink / raw)
To: Vijay Kumar Mishra; +Cc: linux, linux-arm-kernel, linux-kernel, spear-devel
On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> This Patch is to enable CONFIG_AEABI option in kernel. Which basically adds
> support for latest ARMABI (EABI).
>
> It also include support for changes the kernel syscall calling convention to
changing
> disambiguate both ABIs and allow for backward compatibility support.
>
> Without this option the kernel crashes. Crash log is below:
>
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
> Exception stack(0xbf873f64 to 0xbf873fac)
> 3f60: 00000020 804725b4 00000001 00000000 bf872000 80498684 803308bc
> 3f80: 80474fe8 bf872000 412fc091 00000000 bf873fb8 bf873fbc bf873fac 80009c50
> 3fa0: 80009c54 60000113 ffffffff
> r7:bf873f98 r6:ffffffff r5:60000113 r4:80009c54
> [<80009c24>] (default_idle+0x0/0x38) from [<80009e24>] (cpu_idle+0xac/0xf0)
> [<80009d78>] (cpu_idle+0x0/0xf0) from [<803277ec>]
> (secondary_start_kernel+0xec/0x10c)
> r8:0000406a r7:80498950 r6:10c03c7d r5:00000001 r4:80478bd0
> [<80327700>] (secondary_start_kernel+0x0/0x10c) from [<00326dc8>] (0x326dc8)
> r5:0
> ---
> arch/arm/configs/spear13xx_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
> index 1b5ceff..4e2866d 100644
> --- a/arch/arm/configs/spear13xx_defconfig
> +++ b/arch/arm/configs/spear13xx_defconfig
> @@ -15,6 +15,7 @@ CONFIG_SMP=y
> # CONFIG_SMP_ON_UP is not set
> # CONFIG_ARM_CPU_TOPOLOGY is not set
> CONFIG_VMSPLIT_2G=y
> +CONFIG_AEABI=y
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_BINFMT_MISC=y
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 3/3] SPEAr13xx_defconfig: Enable compilation using the latest
@ 2013-02-08 10:55 ` Viresh Kumar
0 siblings, 0 replies; 17+ messages in thread
From: Viresh Kumar @ 2013-02-08 10:55 UTC (permalink / raw)
To: linux-arm-kernel
On 8 February 2013 16:16, Vijay Kumar Mishra <vijay.kumar@st.com> wrote:
> This Patch is to enable CONFIG_AEABI option in kernel. Which basically adds
> support for latest ARMABI (EABI).
>
> It also include support for changes the kernel syscall calling convention to
changing
> disambiguate both ABIs and allow for backward compatibility support.
>
> Without this option the kernel crashes. Crash log is below:
>
> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
> Exception stack(0xbf873f64 to 0xbf873fac)
> 3f60: 00000020 804725b4 00000001 00000000 bf872000 80498684 803308bc
> 3f80: 80474fe8 bf872000 412fc091 00000000 bf873fb8 bf873fbc bf873fac 80009c50
> 3fa0: 80009c54 60000113 ffffffff
> r7:bf873f98 r6:ffffffff r5:60000113 r4:80009c54
> [<80009c24>] (default_idle+0x0/0x38) from [<80009e24>] (cpu_idle+0xac/0xf0)
> [<80009d78>] (cpu_idle+0x0/0xf0) from [<803277ec>]
> (secondary_start_kernel+0xec/0x10c)
> r8:0000406a r7:80498950 r6:10c03c7d r5:00000001 r4:80478bd0
> [<80327700>] (secondary_start_kernel+0x0/0x10c) from [<00326dc8>] (0x326dc8)
> r5:0
> ---
> arch/arm/configs/spear13xx_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
> index 1b5ceff..4e2866d 100644
> --- a/arch/arm/configs/spear13xx_defconfig
> +++ b/arch/arm/configs/spear13xx_defconfig
> @@ -15,6 +15,7 @@ CONFIG_SMP=y
> # CONFIG_SMP_ON_UP is not set
> # CONFIG_ARM_CPU_TOPOLOGY is not set
> CONFIG_VMSPLIT_2G=y
> +CONFIG_AEABI=y
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_BINFMT_MISC=y
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2013-02-11 3:50 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-08 10:46 [PATCH 0/3] Patch set fixing SPEAr13xx boot issues on V3.8-rc6 Vijay Kumar Mishra
2013-02-08 10:46 ` [PATCH 1/3] SPEAr13xx_defconfig: Enable Memory split 2G/2G needed Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:50 ` Viresh Kumar
2013-02-08 10:50 ` Viresh Kumar
2013-02-08 17:49 ` Nicolas Pitre
2013-02-08 17:49 ` Nicolas Pitre
2013-02-11 3:50 ` Shiraz Hashim
2013-02-11 3:50 ` Shiraz Hashim
2013-02-08 10:46 ` [PATCH 2/3] ARM:dts:SPEAr1310:Correct the clcd pin group name Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:53 ` Viresh Kumar
2013-02-08 10:53 ` Viresh Kumar
2013-02-08 10:46 ` [PATCH 3/3] SPEAr13xx_defconfig: Enable compilation using the latest Vijay Kumar Mishra
2013-02-08 10:46 ` Vijay Kumar Mishra
2013-02-08 10:55 ` Viresh Kumar
2013-02-08 10:55 ` Viresh Kumar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.