* Re: EFI boot crash regression (was: Re: 5.6-### doesn't boot)
2020-01-31 18:48 ` Dan Williams
@ 2020-02-01 15:35 ` Jörg Otte
2020-02-01 16:02 ` Ard Biesheuvel
2020-02-01 21:29 ` Dan Williams
0 siblings, 2 replies; 20+ messages in thread
From: Jörg Otte @ 2020-02-01 15:35 UTC (permalink / raw)
To: Dan Williams
Cc: Ard Biesheuvel, Linus Torvalds, Linux Kernel Mailing List,
the arch/x86 maintainers, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 3631 bytes --]
Am Fr., 31. Jan. 2020 um 19:48 Uhr schrieb Dan Williams
<dan.j.williams@intel.com>:
>
> On Fri, Jan 31, 2020 at 10:37 AM Ingo Molnar <mingo@kernel.org> wrote:
> >
> >
> > (Cc:ed Dan and Ard)
> >
> > * Jörg Otte <jrg.otte@gmail.com> wrote:
> >
> > > Am Fr., 31. Jan. 2020 um 07:43 Uhr schrieb Ingo Molnar <mingo@kernel.org>:
> > > >
> > > >
> > > > * Linus Torvalds <torvalds@linux-foundation.org> wrote:
> > > >
> > > > > On Thu, Jan 30, 2020 at 9:32 AM Jörg Otte <jrg.otte@gmail.com> wrote:
> > > > > >
> > > > > > my notebook doesn't boot with current kernel. Booting stops right after
> > > > > > displaying "loading initial ramdisk..". No further displays.
> > > > > > Also nothing is wriiten to the logs.
> > > > > >
> > > > > > last known good kernel is : vmlinuz-5.5.0-00849-gb0be0eff1a5a
> > > > > > first known bad kernel is : vmlinuz-5.5.0-01154-gc677124e631d
> > > > >
> > > > > It would be lovely if you can bisect a bit. But my merges in that
> > > > > range are all from Ingo:
> > > > >
> > > > > Ingo Molnar (7):
> > > > > header cleanup
> > > > > objtool updates
> > > > > RCU updates
> > > > > EFI updates
> > > > > locking updates
> > > > > perf updates
> > > > > scheduler updates
> > > >
> > > > If I had to guess then perhaps the EFI changes look the most dangerous
> > > > ones from these trees - but in principle most of these trees could
> > > > contain a boot crasher/hang bug.
> > > >
> > > > > but not having any messages at all makes it hard to guess where it
> > > > > would be.
> > > >
> > > > To improve debug output:
> > > >
> > > > Removing any 'fbcon' options in /boot/grub/grub.cfg and adding this to
> > > > the boot options might improve the debug output:
> > > >
> > > > earlyprintk=vga initcall_debug ignore_loglevel debug panic_on_warn
> > > >
> > > > So for example if the relevant kernel boot entry in grub.cfg looks like
> > > > this:
> > > >
> > > > linux /vmlinuz-5.3.0-26-generic root=UUID=1bcxabe3-0b62-4x04-b456-47cd90c0e6x4 ro splash $vt_handoff
> > > >
> > > > Then editing it to the following could in principle produce (much) more
> > > > verbose boot output:
> > > >
> > > > linux /vmlinuz-5.3.0-26-generic root=UUID=1bcxabe3-0b62-4x04-b456-47cd90c0e6x4 ro earlyprintk=vga initcall_debug ignore_loglevel debug panic_on_warn $vt_handoff
> > > >
> > > > If this produces more output than just "loading initial ramdisk..' then a
> > > > photo of the hung screen would be sufficient, no need to transcribe it.
> > > >
> > > > > A few bisect runs would narrow it down a fair amount. Bisecting all the
> > > > > way would be even better, of course,
> > > >
> > > > Agreed!
> > > >
> > > > If compiling full kernels for bisections takes too long (for example
> > > > because the .config is from a distro kernel) then running "make
> > > > localmodconfig" to create a config tailored to the currently active
> > > > modules will cut down significantly on build time.
> > > >
> > > > Also, a warning: if the normal boot log contains spurious warnings then
> > > > the new 'panic_on_warn' option will cause additional trouble on good
> > > > kernels.
> > >
> > > It's bisected.
> > > The first bad commit is :
> > > 1db91035d01aa8bfa2350c00ccb63d629b4041ad
> > > efi: Add tracking for dynamically allocated memmaps
> >
> > Thanks a ton, that's very useful!
> >
> > I've Cc:-ed the EFI gents who are developing this code, maybe they'll
> > spot the bug.
>
> I'll take a look. Jörg, can you paste a full dmesg from a good boot?
Here it is.
Thanks, Jörg
[-- Attachment #2: good-dmesg --]
[-- Type: application/octet-stream, Size: 50209 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[ 0.000000] Linux version 5.5.0-00849-gb0be0eff1a5a (jojo@fichte) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1~18.04.1)) #9 SMP Tue Jan 28 15:58:33 CET 2020
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.5.0-00849-gb0be0eff1a5a root=UUID=9e8cf5b2-8d9b-464c-870f-3ffc818ef7db ro quiet splash lsm=apparmor spectre_v2=auto acpi_mask_gpe=0x13 libata.noacpi=1 vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000068fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000069000-0x000000000006bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000006c000-0x000000000008bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000895d4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000895d5000-0x00000000897d6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000897d7000-0x00000000db02efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db02f000-0x00000000db22efff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000db22f000-0x00000000dce8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dce8f000-0x00000000dcf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[ 0.000000] efi: ACPI=0xdcffe000 ACPI 2.0=0xdcffe014 SMBIOS=0xdce80000
[ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
[ 0.000000] efi: mem48: [Reserved | | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[ 0.000000] efi: mem49: [Reserved | | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[ 0.000000] efi: mem50: [Reserved | | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[ 0.000000] efi: mem51: [Reserved | | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[ 0.000000] efi: mem52: [Reserved | | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[ 0.000000] efi: Removing 5 invalid memory map entries.
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.118 MHz processor
[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000014] last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000017] MTRR default type: write-back
[ 0.000018] MTRR fixed ranges enabled:
[ 0.000019] 00000-9FFFF write-back
[ 0.000019] A0000-BFFFF uncachable
[ 0.000020] C0000-DFFFF write-through
[ 0.000021] E0000-FFFFF write-protect
[ 0.000021] MTRR variable ranges enabled:
[ 0.000022] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000023] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000023] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000024] 3 disabled
[ 0.000024] 4 disabled
[ 0.000024] 5 disabled
[ 0.000025] 6 disabled
[ 0.000025] 7 disabled
[ 0.000025] 8 disabled
[ 0.000025] 9 disabled
[ 0.000309] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000381] last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[ 0.000395] Using GB pages for direct mapping
[ 0.000396] BRK [0x202a01000, 0x202a01fff] PGTABLE
[ 0.000398] BRK [0x202a02000, 0x202a02fff] PGTABLE
[ 0.000398] BRK [0x202a03000, 0x202a03fff] PGTABLE
[ 0.000429] BRK [0x202a04000, 0x202a04fff] PGTABLE
[ 0.000430] BRK [0x202a05000, 0x202a05fff] PGTABLE
[ 0.000567] BRK [0x202a06000, 0x202a06fff] PGTABLE
[ 0.000592] BRK [0x202a07000, 0x202a07fff] PGTABLE
[ 0.000621] BRK [0x202a08000, 0x202a08fff] PGTABLE
[ 0.000652] BRK [0x202a09000, 0x202a09fff] PGTABLE
[ 0.000684] BRK [0x202a0a000, 0x202a0afff] PGTABLE
[ 0.000735] BRK [0x202a0b000, 0x202a0bfff] PGTABLE
[ 0.000780] Secure boot could not be determined
[ 0.000780] RAMDISK: [mem 0x36397000-0x371c2fff]
[ 0.000784] ACPI: Early table checksum verification disabled
[ 0.000786] ACPI: RSDP 0x00000000DCFFE014 000024 (v02 FUJ )
[ 0.000789] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000793] ACPI: FACP 0x00000000DCFFA000 00010C (v05 FUJ PC 00111000 FUJ 00000001)
[ 0.000797] ACPI: DSDT 0x00000000DCFEB000 00BD62 (v02 FUJ FJNBB35 00111000 INTL 20120711)
[ 0.000799] ACPI: FACS 0x00000000DCF9B000 000040
[ 0.000801] ACPI: SSDT 0x00000000DCFFD000 000880 (v01 FUJ SataAhci 00000001 INTL 20120711)
[ 0.000803] ACPI: ASF! 0x00000000DCFFC000 0000A5 (v32 FUJ PC 00111000 FUJ 00000001)
[ 0.000805] ACPI: HPET 0x00000000DCFF9000 000038 (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000807] ACPI: APIC 0x00000000DCFF8000 000098 (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000809] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000811] ACPI: SSDT 0x00000000DCFE8000 002028 (v01 FUJ PtidDevc 00111000 INTL 20120711)
[ 0.000813] ACPI: SSDT 0x00000000DCFE7000 000035 (v01 FUJ Sata0Ide 00111000 INTL 20120711)
[ 0.000815] ACPI: SSDT 0x00000000DCFE6000 000180 (v01 FUJ Sata1Ide 00111000 INTL 20120711)
[ 0.000817] ACPI: SSDT 0x00000000DCFE5000 000539 (v01 FUJ Cpu0Ist 00111000 INTL 20120711)
[ 0.000819] ACPI: SSDT 0x00000000DCFE4000 000AD8 (v01 FUJ CpuPm 00111000 INTL 20120711)
[ 0.000821] ACPI: SSDT 0x00000000DCFE0000 00341F (v01 FUJ SaSsdt 00111000 INTL 20120711)
[ 0.000823] ACPI: UEFI 0x00000000DCFDF000 000042 (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000825] ACPI: POAT 0x00000000DCF76000 000055 (v03 FUJ PC 00111000 FUJ 00000001)
[ 0.000827] ACPI: BATB 0x00000000DCFDE000 000046 (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000829] ACPI: FPDT 0x00000000DCFDD000 000064 (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000831] ACPI: SLIC 0x00000000DCFDC000 000176 (v01 FUJ PC 01110000 FUJ 00000001)
[ 0.000833] ACPI: UEFI 0x00000000DCFDB000 0002BA (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000835] ACPI: BGRT 0x00000000DCFDA000 000038 (v01 FUJ PC 00111000 FUJ 00000001)
[ 0.000841] ACPI: Local APIC address 0xfee00000
[ 0.000855] Zone ranges:
[ 0.000856] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000857] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000858] Normal [mem 0x0000000100000000-0x000000021f5fffff]
[ 0.000859] Movable zone start for each node
[ 0.000859] Early memory node ranges
[ 0.000860] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000860] node 0: [mem 0x0000000000059000-0x0000000000068fff]
[ 0.000861] node 0: [mem 0x000000000006c000-0x000000000008bfff]
[ 0.000861] node 0: [mem 0x0000000000100000-0x00000000895d4fff]
[ 0.000862] node 0: [mem 0x00000000897d7000-0x00000000db02efff]
[ 0.000863] node 0: [mem 0x00000000dcfff000-0x00000000dcffffff]
[ 0.000863] node 0: [mem 0x0000000100000000-0x000000021f5fffff]
[ 0.001063] Zeroed struct page in unavailable ranges: 21067 pages
[ 0.001064] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
[ 0.001065] On node 0 totalpages: 2073525
[ 0.001066] DMA zone: 64 pages used for memmap
[ 0.001066] DMA zone: 70 pages reserved
[ 0.001067] DMA zone: 3975 pages, LIFO batch:0
[ 0.001106] DMA32 zone: 13945 pages used for memmap
[ 0.001106] DMA32 zone: 892462 pages, LIFO batch:63
[ 0.012075] Normal zone: 18392 pages used for memmap
[ 0.012076] Normal zone: 1177088 pages, LIFO batch:63
[ 0.025729] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
[ 0.025799] ACPI: PM-Timer IO Port: 0x1808
[ 0.025800] ACPI: Local APIC address 0xfee00000
[ 0.025806] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.025806] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.025816] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.025818] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.025819] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.025820] ACPI: IRQ0 used by override.
[ 0.025821] ACPI: IRQ9 used by override.
[ 0.025822] Using ACPI (MADT) for SMP configuration information
[ 0.025823] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.025826] smpboot: 8 Processors exceeds NR_CPUS limit of 4
[ 0.025826] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.025831] [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[ 0.025835] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.025838] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.026104] percpu: Embedded 44 pages/cpu s142232 r8192 d29800 u524288
[ 0.026108] pcpu-alloc: s142232 r8192 d29800 u524288 alloc=1*2097152
[ 0.026108] pcpu-alloc: [0] 0 1 2 3
[ 0.026121] Built 1 zonelists, mobility grouping on. Total pages: 2041054
[ 0.026122] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.5.0-00849-gb0be0eff1a5a root=UUID=9e8cf5b2-8d9b-464c-870f-3ffc818ef7db ro quiet splash lsm=apparmor spectre_v2=auto acpi_mask_gpe=0x13 libata.noacpi=1 vt.handoff=1
[ 0.026941] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.027297] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.027332] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.061216] Memory: 7848264K/8294100K available (12290K kernel code, 481K rwdata, 3496K rodata, 920K init, 544K bss, 445836K reserved, 0K cma-reserved)
[ 0.061316] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.061322] Kernel/User page tables isolation: enabled
[ 0.061368] rcu: Hierarchical RCU implementation.
[ 0.061369] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.061378] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.061602] random: get_random_bytes called from start_kernel+0x2f6/0x4b2 with crng_init=0
[ 0.061620] Console: colour dummy device 80x25
[ 0.061625] printk: console [tty0] enabled
[ 0.061628] ACPI: Core revision 20200110
[ 0.061765] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.061778] APIC: Switch to symmetric I/O mode setup
[ 0.062159] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081779] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f38549f16, max_idle_ns: 440795259171 ns
[ 0.081783] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.23 BogoMIPS (lpj=9976472)
[ 0.081785] pid_max: default: 32768 minimum: 301
[ 0.090725] LSM: Security Framework initializing
[ 0.090746] AppArmor: AppArmor initialized
[ 0.090778] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.090800] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.090813] *** VALIDATE tmpfs ***
[ 0.090921] *** VALIDATE proc ***
[ 0.090961] *** VALIDATE cgroup1 ***
[ 0.090963] *** VALIDATE cgroup2 ***
[ 0.090999] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.091010] process: using mwait in idle threads
[ 0.091012] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.091012] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.091015] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.091017] Spectre V2 : auto selected on command line.
[ 0.091018] Spectre V2 : Mitigation: Full generic retpoline
[ 0.091018] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.091019] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.091020] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.091021] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.091022] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.091024] MDS: Mitigation: Clear CPU buffers
[ 0.091181] Freeing SMP alternatives memory: 36K
[ 0.091327] TSC deadline timer enabled
[ 0.091330] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.091401] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.091418] ... version: 3
[ 0.091419] ... bit width: 48
[ 0.091419] ... generic registers: 4
[ 0.091420] ... value mask: 0000ffffffffffff
[ 0.091420] ... max period: 00007fffffffffff
[ 0.091420] ... fixed-purpose events: 3
[ 0.091421] ... event mask: 000000070000000f
[ 0.091452] rcu: Hierarchical SRCU implementation.
[ 0.091507] smp: Bringing up secondary CPUs ...
[ 0.091561] x86: Booting SMP configuration:
[ 0.091561] .... node #0, CPUs: #1
[ 0.092505] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.092505] #2 #3
[ 0.092505] smp: Brought up 1 node, 4 CPUs
[ 0.092505] smpboot: Max logical packages: 2
[ 0.092505] smpboot: Total of 4 processors activated (19952.94 BogoMIPS)
[ 0.093960] devtmpfs: initialized
[ 0.093962] PM: Registering ACPI NVS region [mem 0xdce8f000-0xdcf9efff] (1114112 bytes)
[ 0.093962] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.093962] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.093962] thermal_sys: Registered thermal governor 'step_wise'
[ 0.093962] thermal_sys: Registered thermal governor 'user_space'
[ 0.093963] NET: Registered protocol family 16
[ 0.094052] audit: initializing netlink subsys (disabled)
[ 0.094060] audit: type=2000 audit(1580567367.032:1): state=initialized audit_enabled=0 res=1
[ 0.094060] cpuidle: using governor menu
[ 0.094060] ACPI: bus type PCI registered
[ 0.094060] dca service started, version 1.12.1
[ 0.094060] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.094060] PCI: not using MMCONFIG
[ 0.094060] PCI: Using configuration type 1 for base access
[ 0.094060] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.094060] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.095091] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.095091] cryptd: max_cpu_qlen set to 1000
[ 0.095091] ACPI: Added _OSI(Module Device)
[ 0.095091] ACPI: Added _OSI(Processor Device)
[ 0.095091] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.095091] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.095091] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.095091] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.095091] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.107383] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.107383] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.107469] ACPI: Dynamic OEM Table Load:
[ 0.107475] ACPI: SSDT 0xFFFF9FB0D6328C00 0003D3 (v01 FUJ Cpu0Cst 00003001 INTL 20120711)
[ 0.108216] ACPI: Dynamic OEM Table Load:
[ 0.108221] ACPI: SSDT 0xFFFF9FB0D62CE800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.108986] ACPI: Dynamic OEM Table Load:
[ 0.108990] ACPI: SSDT 0xFFFF9FB0D62C6800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.110139] ACPI: EC: EC started
[ 0.110140] ACPI: EC: interrupt blocked
[ 0.110395] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[ 0.110397] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.110398] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions
[ 0.110399] ACPI: Interpreter enabled
[ 0.110424] ACPI: (supports S0 S3 S5)
[ 0.110425] ACPI: Using IOAPIC for interrupt routing
[ 0.110446] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.110830] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.110836] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.111037] ACPI: Masking GPE 0x13.
[ 0.111052] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.117939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.117943] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI HPX-Type3]
[ 0.118067] acpi PNP0A08:00: _OSC failed (AE_ERROR)
[ 0.118259] PCI host bridge to bus 0000:00
[ 0.118261] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.118262] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.118263] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.118264] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.118265] pci_bus 0000:00: root bus resource [mem 0xff700100-0xff7001ff window]
[ 0.118266] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.118274] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.118425] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.118461] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.118631] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.118640] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.118645] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.118649] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.118792] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.118800] pci 0000:00:03.0: reg 0x10: [mem 0xf0710000-0xf0713fff 64bit]
[ 0.118967] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.118986] pci 0000:00:14.0: reg 0x10: [mem 0xf0700000-0xf070ffff 64bit]
[ 0.119042] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.119178] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.119197] pci 0000:00:16.0: reg 0x10: [mem 0xf0719000-0xf071900f 64bit]
[ 0.119256] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.119391] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.119408] pci 0000:00:1b.0: reg 0x10: [mem 0xf0714000-0xf0717fff 64bit]
[ 0.119474] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.119608] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.119678] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.119847] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.119918] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.120085] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.120156] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.120324] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.120554] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.120569] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.120576] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.120583] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.120590] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.120597] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.120604] pci 0000:00:1f.2: reg 0x24: [mem 0xf071c000-0xf071c7ff]
[ 0.120638] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.120767] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.120783] pci 0000:00:1f.3: reg 0x10: [mem 0xf0718000-0xf07180ff 64bit]
[ 0.120802] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.120949] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
[ 0.120969] pci 0000:00:1f.6: reg 0x10: [mem 0xf071b000-0xf071bfff 64bit]
[ 0.121159] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.121193] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.121265] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
[ 0.121337] pci 0000:03:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.121599] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.121704] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.121709] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.121759] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.121786] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.121814] pci 0000:04:00.0: reg 0x18: [mem 0xf0500000-0xf0500fff 64bit]
[ 0.121831] pci 0000:04:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.121926] pci 0000:04:00.0: supports D1 D2
[ 0.121927] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122000] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.122003] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.122006] pci 0000:00:1c.5: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.122011] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.122029] pci_bus 0000:00: on NUMA node 0
[ 0.122522] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122562] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122600] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122638] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122713] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122750] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.122787] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.123011] ACPI: EC: interrupt unblocked
[ 0.123018] ACPI: EC: event unblocked
[ 0.123025] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.123026] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions and events
[ 0.123061] iommu: Default domain type: Translated
[ 0.123121] SCSI subsystem initialized
[ 0.123127] libata version 3.00 loaded.
[ 0.123138] ACPI: bus type USB registered
[ 0.123149] usbcore: registered new interface driver usbfs
[ 0.123154] usbcore: registered new interface driver hub
[ 0.125783] usbcore: registered new device driver usb
[ 0.125784] Registered efivars operations
[ 0.125784] Advanced Linux Sound Architecture Driver Initialized.
[ 0.125784] PCI: Using ACPI for IRQ routing
[ 0.125784] PCI: pci_cache_line_size set to 64 bytes
[ 0.125784] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.125784] e820: reserve RAM buffer [mem 0x00069000-0x0006ffff]
[ 0.125784] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[ 0.125784] e820: reserve RAM buffer [mem 0x895d5000-0x8bffffff]
[ 0.125784] e820: reserve RAM buffer [mem 0xdb02f000-0xdbffffff]
[ 0.125784] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[ 0.125784] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.125784] NetLabel: Initializing
[ 0.125784] NetLabel: domain hash size = 128
[ 0.125784] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.125784] NetLabel: unlabeled traffic allowed by default
[ 0.125784] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.125784] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.129782] clocksource: Switched to clocksource tsc-early
[ 0.129788] *** VALIDATE ramfs ***
[ 0.129788] *** VALIDATE hugetlbfs ***
[ 0.129788] AppArmor: AppArmor Filesystem Enabled
[ 0.129788] pnp: PnP ACPI init
[ 0.129788] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.129788] system 00:00: [io 0xffff] has been reserved
[ 0.129788] system 00:00: [io 0xffff] has been reserved
[ 0.129788] system 00:00: [io 0xffff] has been reserved
[ 0.129788] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.129788] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.129788] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129788] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.129788] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129788] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.129788] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.129788] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.129788] pnp 00:04: Plug and Play ACPI device, IDs FUJ0300 PNP0303 (active)
[ 0.129788] pnp 00:05: Plug and Play ACPI device, IDs SYN1f08 PNP0f13 (active)
[ 0.129788] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.129788] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.129788] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.129788] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.129788] system 00:06: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.129788] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.129788] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.129788] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.129788] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.129788] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.129788] system 00:06: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[ 0.129788] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129788] pnp: PnP ACPI: found 7 devices
[ 0.136050] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.136057] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.136063] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.136072] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.136077] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.136084] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.136086] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.136090] pci 0000:00:1c.5: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.136094] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.136100] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.136101] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.136102] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.136103] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[ 0.136104] pci_bus 0000:00: resource 8 [mem 0xff700100-0xff7001ff window]
[ 0.136105] pci_bus 0000:03: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.136106] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.136107] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.136108] pci_bus 0000:04: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.136191] NET: Registered protocol family 2
[ 0.136269] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.136281] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.136357] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.136510] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.136534] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.136554] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.136604] NET: Registered protocol family 1
[ 0.136712] Unpacking initramfs...
[ 0.300568] Freeing initrd memory: 14512K
[ 0.300576] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.300577] software IO TLB: mapped [mem 0xc9907000-0xcd907000] (64MB)
[ 0.300879] Initialise system trusted keyrings
[ 0.300914] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.301776] fuse: init (API version 7.31)
[ 0.301791] *** VALIDATE fuse ***
[ 0.301793] *** VALIDATE fuse ***
[ 0.306893] Key type asymmetric registered
[ 0.306894] Asymmetric key parser 'x509' registered
[ 0.306903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.307459] intel_idle: MWAIT substates: 0x42120
[ 0.307460] intel_idle: v0.4.1 model 0x3C
[ 0.307619] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.307769] ACPI: AC Adapter [ADP1] (on-line)
[ 0.307826] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.307839] ACPI: Lid Switch [LID0]
[ 0.307861] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.307874] ACPI: Power Button [PWRB]
[ 0.307896] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.307921] ACPI: Power Button [PWRF]
[ 0.308352] ACPI: Invalid active0 threshold
[ 0.308419] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.308420] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.308580] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.308581] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.308607] ioatdma: Intel(R) QuickData Technology Driver 5.00
[ 0.308856] Linux agpgart interface v0.103
[ 0.309344] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.317843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.317844] [drm] Driver supports precise vblank timestamp query.
[ 0.339055] [drm] Initialized i915 1.6.0 20191101 for 0000:00:02.0 on minor 0
[ 0.342905] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.343120] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.344042] loop: module loaded
[ 0.344052] usbcore: registered new interface driver rtsx_usb
[ 0.344093] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200110/utaddress-213)
[ 0.344097] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.344099] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20200110/utaddress-213)
[ 0.344102] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.344102] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20200110/utaddress-213)
[ 0.344104] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20200110/utaddress-213)
[ 0.344106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.344106] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20200110/utaddress-213)
[ 0.344108] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20200110/utaddress-213)
[ 0.344110] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20200110/utaddress-213)
[ 0.344112] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.344112] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.344167] ahci 0000:00:1f.2: version 3.0
[ 0.344296] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.344319] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x34 impl SATA mode
[ 0.344321] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
[ 0.366269] scsi host0: ahci
[ 0.366469] scsi host1: ahci
[ 0.366570] scsi host2: ahci
[ 0.366643] scsi host3: ahci
[ 0.366708] scsi host4: ahci
[ 0.366781] scsi host5: ahci
[ 0.366811] ata1: DUMMY
[ 0.366812] ata2: DUMMY
[ 0.366814] ata3: SATA max UDMA/133 abar m2048@0xf071c000 port 0xf071c200 irq 29
[ 0.366815] ata4: DUMMY
[ 0.366817] ata5: SATA max UDMA/133 abar m2048@0xf071c000 port 0xf071c300 irq 29
[ 0.366819] ata6: SATA max UDMA/133 abar m2048@0xf071c000 port 0xf071c380 irq 29
[ 0.366973] r8169 0000:04:00.0: Mem-Wr-Inval unavailable
[ 0.368285] libphy: r8169: probed
[ 0.368497] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl, e0:18:77:c1:80:1d, XID 2c9, IRQ 30
[ 0.368498] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.368512] Intel(R) Wireless WiFi driver for Linux
[ 0.368513] Copyright(c) 2003- 2015 Intel Corporation
[ 0.368871] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.368872] xhci_hcd 0000:00:14.0: PCI INT A: not connected
[ 0.368896] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.368900] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.369972] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.370275] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[ 0.370287] iwlwifi 0000:03:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[ 0.370347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 0.370349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.370350] usb usb1: Product: xHCI Host Controller
[ 0.370352] usb usb1: Manufacturer: Linux 5.5.0-00849-gb0be0eff1a5a xhci-hcd
[ 0.370353] usb usb1: SerialNumber: 0000:00:14.0
[ 0.370461] hub 1-0:1.0: USB hub found
[ 0.370482] hub 1-0:1.0: 14 ports detected
[ 0.371768] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.371772] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.371774] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.371804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[ 0.371805] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.371806] usb usb2: Product: xHCI Host Controller
[ 0.371807] usb usb2: Manufacturer: Linux 5.5.0-00849-gb0be0eff1a5a xhci-hcd
[ 0.371808] usb usb2: SerialNumber: 0000:00:14.0
[ 0.371876] hub 2-0:1.0: USB hub found
[ 0.371886] hub 2-0:1.0: 4 ports detected
[ 0.372163] usbcore: registered new interface driver usblp
[ 0.372173] usbcore: registered new interface driver usb-storage
[ 0.372194] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.374964] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.374966] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.375038] mousedev: PS/2 mouse device common for all mice
[ 0.375399] intel_pstate: Intel P-state driver initializing
[ 0.375580] EFI Variables Facility v0.08 2004-May-17
[ 0.379693] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.381805] hid: raw HID events driver (C) Jiri Kosina
[ 0.381835] usbcore: registered new interface driver usbhid
[ 0.381836] usbhid: USB HID core driver
[ 0.381897] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT]
[ 0.382098] ACPI: \_SB_.FEXT: BTNI: [0x80001]
[ 0.382121] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input6
[ 0.382282] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 0.382526] usbcore: registered new interface driver snd-usb-audio
[ 0.382641] NET: Registered protocol family 10
[ 0.382781] Segment Routing with IPv6
[ 0.382793] NET: Registered protocol family 17
[ 0.382941] microcode: sig=0x306c3, pf=0x10, revision=0x27
[ 0.382970] microcode: Microcode Update Driver: v2.2.
[ 0.382972] IPI shorthand broadcast: enabled
[ 0.382975] sched_clock: Marking stable (382745443, 222120)->(397472925, -14505362)
[ 0.383006] Loading compiled-in X.509 certificates
[ 0.386339] Loaded X.509 cert 'Build time autogenerated kernel key: 127e5e955fcf701bb9078627dd40f1f2d1736007'
[ 0.386350] Key type ._fscrypt registered
[ 0.386351] Key type .fscrypt registered
[ 0.386362] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.386599] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.388785] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 0.388787] ALSA device list:
[ 0.388788] No soundcards found.
[ 0.389846] iwlwifi 0000:03:00.0: base HW address: 80:19:34:4d:31:40
[ 0.401637] snd_hda_codec_realtek hdaudioC1D0: ALC269VC: SKU not ready 0x909701f0
[ 0.401890] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 0.401891] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.401892] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 0.401893] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 0.401893] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 0.401894] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
[ 0.401895] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 0.407467] random: fast init done
[ 0.408193] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 0.408221] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 0.593997] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 0.705855] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[ 0.862083] usb 1-2: New USB device found, idVendor=258a, idProduct=0001, bcdDevice= 1.00
[ 0.862085] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.862086] usb 1-2: Product: USB KEYBOARD
[ 0.862087] usb 1-2: Manufacturer: SINO WEALTH
[ 0.866939] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:258A:0001.0001/input/input10
[ 0.926122] hid-generic 0003:258A:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-2/input0
[ 0.932950] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:258A:0001.0002/input/input11
[ 0.990008] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:258A:0001.0002/input/input12
[ 0.990327] hid-generic 0003:258A:0001.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-2/input1
[ 1.117855] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.138261] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 1.138262] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.138263] usb 1-5: Product: USB2.0-CRW
[ 1.138264] usb 1-5: Manufacturer: Generic
[ 1.138265] usb 1-5: SerialNumber: 20100201396000000
[ 1.265854] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[ 1.288336] usb 1-6: New USB device found, idVendor=05e3, idProduct=0605, bcdDevice= 6.0b
[ 1.288338] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.288339] usb 1-6: Product: USB2.0 Hub
[ 1.289425] hub 1-6:1.0: USB hub found
[ 1.289730] hub 1-6:1.0: 4 ports detected
[ 1.309853] tsc: Refined TSC clocksource calibration: 2494.227 MHz
[ 1.309859] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ec29a0f, max_idle_ns: 440795214066 ns
[ 1.309876] clocksource: Switched to clocksource tsc
[ 1.313898] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 1.417856] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 1.502915] Console: switching to colour frame buffer device 170x48
[ 1.502929] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff99c64ac0)
[ 1.505732] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 1.505734] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.505735] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.505736] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 1.505737] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x0
[ 1.505737] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 1.506191] input: HDA Intel HDMI HDMI as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 1.521691] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.571128] usb 1-8: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[ 1.571130] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.649856] usb 1-6.4: new full-speed USB device number 6 using xhci_hcd
[ 1.752632] usb 1-6.4: New USB device found, idVendor=1130, idProduct=1620, bcdDevice= 1.40
[ 1.752634] usb 1-6.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.752635] usb 1-6.4: Product: USB AUDIO
[ 1.759782] usb 1-6.4: Warning! Unlikely big volume range (=17152), cval->res is probably wrong.
[ 1.759785] usb 1-6.4: [2] FU [PCM Playback Volume] ch = 2, val = 0/17152/1
[ 1.760587] input: USB AUDIO as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.4/1-6.4:1.2/0003:1130:1620.0003/input/input14
[ 1.817943] hid-generic 0003:1130:1620.0003: input,hidraw2: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:14.0-6.4/input2
[ 1.837010] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.841683] ata3.00: ATAPI: TSSTcorp CDDVDW SU-208CB, FU01, max UDMA/100
[ 1.846679] ata3.00: configured for UDMA/100
[ 1.856713] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208CB FU01 PQ: 0 ANSI: 5
[ 1.919545] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.919547] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.919642] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.919690] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.233209] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.349800] ata5.00: ATA-9: ST500LM000-1EJ162, SM36, max UDMA/133
[ 2.349802] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.394181] ata5.00: configured for UDMA/133
[ 2.394299] scsi 4:0:0:0: Direct-Access ATA ST500LM000-1EJ16 SM36 PQ: 0 ANSI: 5
[ 2.394419] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.394433] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.394435] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 2.394442] sd 4:0:0:0: [sda] Write Protect is off
[ 2.394444] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.394456] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.398342] sda: sda1 sda2
[ 2.398510] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.709256] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.709467] Freeing unused kernel image (initmem) memory: 920K
[ 2.709492] Write protecting the kernel read-only data: 18432k
[ 2.709838] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 2.709975] Freeing unused kernel image (rodata/data gap) memory: 600K
[ 2.710115] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.710116] x86/mm: Checking user space page tables
[ 2.710146] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.710147] Run /init as init process
[ 2.784663] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 2.818201] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 3.100774] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 3.100869] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 3.181028] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.351406] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[ 3.380217] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.398018] systemd[1]: Detected architecture x86-64.
[ 3.426454] systemd[1]: Set hostname to <fichte>.
[ 3.430037] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
[ 3.489295] systemd-fstab-generator[324]: Swap not supported, ignoring fstab swap entry for /swapfile.
[ 3.693392] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 3.693395] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 3.828918] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.828932] systemd[1]: Reached target Remote File Systems.
[ 3.829163] systemd[1]: Created slice System Slice.
[ 3.829228] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.829279] systemd[1]: Listening on udev Kernel Socket.
[ 3.858658] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.931127] systemd-journald[340]: Received request to flush runtime journal from PID 1
[ 4.127021] Bluetooth: Core ver 2.22
[ 4.127031] NET: Registered protocol family 31
[ 4.127032] Bluetooth: HCI device and connection manager initialized
[ 4.127036] Bluetooth: HCI socket layer initialized
[ 4.127037] Bluetooth: L2CAP socket layer initialized
[ 4.127038] Bluetooth: SCO socket layer initialized
[ 4.264359] usbcore: registered new interface driver btusb
[ 4.276847] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4.276851] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4.407842] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 4.422871] Bluetooth: hci0: Intel firmware patch completed and activated
[ 4.789634] audit: type=1400 audit(1580567371.720:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=581 comm="apparmor_parser"
[ 4.790266] audit: type=1400 audit(1580567371.724:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=580 comm="apparmor_parser"
[ 4.794227] audit: type=1400 audit(1580567371.728:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=583 comm="apparmor_parser"
[ 4.801396] audit: type=1400 audit(1580567371.732:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=585 comm="apparmor_parser"
[ 4.802260] audit: type=1400 audit(1580567371.736:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=584 comm="apparmor_parser"
[ 4.802263] audit: type=1400 audit(1580567371.736:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=584 comm="apparmor_parser"
[ 4.802407] audit: type=1400 audit(1580567371.736:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=577 comm="apparmor_parser"
[ 4.802412] audit: type=1400 audit(1580567371.736:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=577 comm="apparmor_parser"
[ 4.802414] audit: type=1400 audit(1580567371.736:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=577 comm="apparmor_parser"
[ 6.530519] RTL8211E Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[ 6.722947] r8169 0000:04:00.0 enp4s0: Link is Down
[ 8.658583] random: crng init done
[ 8.658585] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.640069] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 9.640081] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 9.650028] r8169 0000:04:00.0 enp4s0: Link is Down
[ 12.947316] r8169 0000:04:00.0 enp4s0: Link is Up - 100Mbps/Full - flow control off
[ 21.824862] input: BluetoothMouse3600 Mouse as /devices/virtual/misc/uhid/0005:045E:0916.0004/input/input15
[ 21.825085] input: BluetoothMouse3600 Consumer Control as /devices/virtual/misc/uhid/0005:045E:0916.0004/input/input16
[ 21.825211] hid-generic 0005:045E:0916.0004: input,hidraw3: BLUETOOTH HID v1.10 Mouse [BluetoothMouse3600] on 80:19:34:4D:31:44
^ permalink raw reply [flat|nested] 20+ messages in thread