All of lore.kernel.org
 help / color / mirror / Atom feed
* [Xenomai-help] Regarding xeno test (somethign died at 3150)
@ 2011-07-11 16:06 suresh reddy
  2011-07-11 17:57 ` Gilles Chanteperdrix
  0 siblings, 1 reply; 8+ messages in thread
From: suresh reddy @ 2011-07-11 16:06 UTC (permalink / raw)
  To: Xenomai help

[-- Attachment #1: Type: text/plain, Size: 27034 bytes --]

Dear Xenomai Team,

I run the xeno-test on pandaboard and it giving me the mentioned error.





Texas Instruments X-Loader 1.5.0 (Jul  4 2011 - 10:28:29)
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2011.06-00010-gff6b47a-dirty (Jul 04 2011 - 10:42:54)

CPU  : OMAP4430
Board: OMAP4 Panda
I2C:   ready
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
reading boot.scr

** Unable to read "boot.scr" from mmc 0:1 **
reading uImage

2601652 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-2.6.37.6
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2601588 Bytes = 2.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Linux version 2.6.37.6 (root@domain.hid) (gcc version 4.5.1
(Sourcery G++ Lite 2010.09-50) ) #1 SMP PREEMP1
[    0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7),
cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction
cache
[    0.000000] Machine: OMAP4 Panda board

[    0.000000] Memory policy: ECC disabled, Data cache writealloc

[    0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc
region overlap).
[    0.000000] OMAP4430 ES2.0

[    0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000

[    0.000000] FIXME: omap44xx_sram_init not implemented

[    0.000000] PERCPU: Embedded 9 pages/cpu @c0ba3000 s12384 r8192 d16288
u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 195072
[    0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M
root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[    0.000000] Memory: 1024MB = 1024MB total

[    0.000000] Memory: 773656k/773656k available, 12776k reserved, 0K
highmem
[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

[    0.000000]     vmalloc : 0xf0800000 - 0xf8000000   ( 120 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .init : 0xc0008000 - 0xc002e000   ( 152 kB)

[    0.000000]       .text : 0xc002e000 - 0xc04f3000   (4884 kB)

[    0.000000]       .data : 0xc04f4000 - 0xc0526520   ( 202 kB)

[    0.000000] Preemptable hierarchical RCU implementation.

[    0.000000]  RCU-based detection of stalled CPUs is disabled.

[    0.000000]  Verbose stalled-CPUs detection is disabled.

[    0.000000] NR_IRQS:402

[    0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to
complete transition
[    0.000000] ------------[ cut here ]------------

[    0.000000] WARNING: at arch/arm/mach-omap2/clockdomain.c:868
omap2_clkdm_deny_idle+0x58/0xc8()
[    0.000000] clockdomain: OMAP4 wakeup/sleep dependency support is not yet
implemented
[    0.000000] Modules linked in:

[    0.000000] Backtrace:

[    0.000000] [<c0037b90>] (dump_backtrace+0x0/0x110) from [<c041824c>]
(dump_stack+0x18/0x1c)
[    0.000000]  r6:c04a5441 r5:00000364 r4:c04f5f40 r3:00000000

[    0.000000] [<c0418234>] (dump_stack+0x0/0x1c) from [<c005c7e4>]
(warn_slowpath_common+0x54/0x6c)
[    0.000000] [<c005c790>] (warn_slowpath_common+0x0/0x6c) from
[<c005c8a0>] (warn_slowpath_fmt+0x38/0x40)
[    0.000000]  r8:80024930 r7:c05055bc r6:00000000 r5:c050602c r4:c0526a14

[    0.000000] r3:00000009

[    0.000000] [<c005c868>] (warn_slowpath_fmt+0x0/0x40) from [<c00453c4>]
(omap2_clkdm_deny_idle+0x58/0xc8)
[    0.000000]  r3:00000000 r2:c04a5463

[    0.000000] [<c004536c>] (omap2_clkdm_deny_idle+0x0/0xc8) from
[<c0045568>] (clkdm_init+0x134/0x170)
[    0.000000]  r5:c05055a4 r4:c050602c

[    0.000000] [<c0045434>] (clkdm_init+0x0/0x170) from [<c000d620>]
(omap2_init_common_hw+0x20/0x9c)
[    0.000000]  r7:c0504be4 r6:c0ba00e0 r5:c0026118 r4:c0526520

[    0.000000] [<c000d600>] (omap2_init_common_hw+0x0/0x9c) from
[<c000f500>] (omap4_panda_init_irq+0x18/0x24)
[    0.000000] [<c000f4e8>] (omap4_panda_init_irq+0x0/0x24) from
[<c000a918>] (init_IRQ+0x18/0x20)
[    0.000000] [<c000a900>] (init_IRQ+0x0/0x20) from [<c0008b30>]
(start_kernel+0x17c/0x2e4)
[    0.000000] [<c00089b4>] (start_kernel+0x0/0x2e4) from [<80008034>]
(0x80008034)
[    0.000000]  r6:c0026114 r5:c05266d0 r4:10c53c7d

[    0.000000] ---[ end trace 1b75b31a2719ed1c ]---

[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for
dpll_mpu_m2_ck.
[    0.000000] GPMC revision 6.0

[    0.000000] OMAP GPIO hardware version 0.1

[    0.000000] OMAP clockevent source: GPTIMER1 at 38400000 Hz

[    0.000000] I-pipe 1.18-03: pipeline enabled.

[    0.000000] Console: colour dummy device 80x30

[    0.000000] Calibrating delay loop... 2011.95 BogoMIPS (lpj=10059776)

[    0.000000] pid_max: default: 32768 minimum: 301

[    0.000000] Mount-cache hash table entries: 512

[    0.000000] CPU: Testing write buffer coherency: ok

[    0.000000] local timer: 504.00MHz.

[    0.000000] I-pipe, 504.000 MHz timer

[    0.000000] I-pipe, 504.000 MHz clocksource

[    0.000000] L310 cache controller enabled

[    0.000000] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x0e070000,
Cache size: 1048576 B
[    0.000000] CPU1: Booted secondary processor

[    0.000000] local timer: 504.00MHz.

[    0.000000] I-pipe, 504.000 MHz timer

[    0.000000] Brought up 2 CPUs

[    0.000000] SMP: Total of 2 processors activated (4023.91 BogoMIPS).

[    0.000000] regulator: core version 0.5

[    0.000000] regulator: dummy:

[    0.000000] NET: Registered protocol family 16

[    0.000000] OMAP DMA hardware revision 0.0

[    0.013214] bio: create slab <bio-0> at 0

[    0.015167] SCSI subsystem initialized

[    0.016845] usbcore: registered new interface driver usbfs

[    0.017028] usbcore: registered new interface driver hub

[    0.017211] usbcore: registered new device driver usb

[    0.028625] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz

[    0.049255] Skipping twl internal clock init and using bootloader value
(unknown osc rate)
[    0.050872] twl6030: PIH (irq 39) chaining IRQs 368..387

[    0.051879] regulator: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby

[    0.053100] regulator: VPP: 1800 <--> 2500 mV at 1900 mV normal standby

[    0.054351] regulator: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby

[    0.055114] regulator: VANA: 2100 mV normal standby

[    0.055847] regulator: VCXIO: 1800 mV normal standby

[    0.056610] regulator: VDAC: 1800 mV normal standby

[    0.057373] regulator: VUSB: 3300 mV normal standby

[    0.058593] regulator: VAUX1_6030: 1000 <--> 3000 mV at 1800 mV normal
standby
[    0.059844] regulator: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal
standby
[    0.061065] regulator: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal
standby
[    0.078613] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz

[    0.098602] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz

[    0.118591] i2c_omap i2c_omap.4: bus 4 rev4.0 at 400 kHz

[    0.120391] Switching to clocksource ipipe_tsc

[    0.136871] NET: Registered protocol family 2

[    0.137115] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[    0.137847] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[    0.139923] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[    0.141021] TCP: Hash tables configured (established 131072 bind 65536)

[    0.141021] TCP reno registered

[    0.141052] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.141082] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.141418] NET: Registered protocol family 1

[    0.141967] RPC: Registered udp transport module.

[    0.141967] RPC: Registered tcp transport module.

[    0.141998] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.143127] ------------[ cut here ]------------

[    0.143188] WARNING: at arch/arm/mach-omap2/pm.c:64
_init_omap_device+0x8c/0xac()
[    0.143188] _init_omap_device: could not find omap_hwmod for iva

[    0.143188] Modules linked in:

[    0.143218] Backtrace:

[    0.143249] [<c0037b90>] (dump_backtrace+0x0/0x110) from [<c041824c>]
(dump_stack+0x18/0x1c)
[    0.143280]  r6:c04a4976 r5:00000040 r4:ef82ff40 r3:00000000

[    0.143310] [<c0418234>] (dump_stack+0x0/0x1c) from [<c005c7e4>]
(warn_slowpath_common+0x54/0x6c)
[    0.143310] [<c005c790>] (warn_slowpath_common+0x0/0x6c) from
[<c005c8a0>] (warn_slowpath_fmt+0x38/0x40)
[    0.143341]  r8:00000000 r7:c000eb94 r6:c05269d0 r5:c04a49e1 r4:c0024ed4

[    0.143371] r3:00000009

[    0.143371] [<c005c868>] (warn_slowpath_fmt+0x0/0x40) from [<c00416d4>]
(_init_omap_device+0x8c/0xac)
[    0.143402]  r3:c041cb8b r2:c04a498f

[    0.143432] [<c0041648>] (_init_omap_device+0x0/0xac) from [<c000ebb8>]
(omap2_common_pm_init+0x24/0x88)
[    0.143432]  r6:c0567c00 r5:c0504578 r4:c0024ed4

[    0.143463] [<c000eb94>] (omap2_common_pm_init+0x0/0x88) from
[<c002e928>] (do_one_initcall+0xc0/0x194)
[    0.143493] [<c002e868>] (do_one_initcall+0x0/0x194) from [<c0008df0>]
(kernel_init+0x158/0x220)
[    0.143493]  r8:00000000 r7:00000013 r6:c0567c00 r5:c0504578 r4:c0024ed4

[    0.143554] [<c0008c98>] (kernel_init+0x0/0x220) from [<c005fc38>]
(do_exit+0x0/0x678)
[    0.143554]  r6:c005fc38 r5:c0008c98 r4:00000000 r3:00000000

[    0.143585] ---[ end trace 1b75b31a2719ed1d ]---

[    0.143798] ------------[ cut here ]------------

[    0.143798] WARNING: at arch/arm/mach-omap2/pm.c:64
_init_omap_device+0x8c/0xac()
[    0.143829] _init_omap_device: could not find omap_hwmod for dsp

[    0.143829] Modules linked in:

[    0.143829] Backtrace:

[    0.143859] [<c0037b90>] (dump_backtrace+0x0/0x110) from [<c041824c>]
(dump_stack+0x18/0x1c)
[    0.143859]  r6:c04a4976 r5:00000040 r4:ef82ff40 r3:00000000

[    0.143920] [<c0418234>] (dump_stack+0x0/0x1c) from [<c005c7e4>]
(warn_slowpath_common+0x54/0x6c)
[    0.143920] [<c005c790>] (warn_slowpath_common+0x0/0x6c) from
[<c005c8a0>] (warn_slowpath_fmt+0x38/0x40)
[    0.143951]  r8:00000000 r7:c000eb94 r6:c05269d8 r5:c04a25fa r4:c0024ed4

[    0.143951] r3:00000009

[    0.143981] [<c005c868>] (warn_slowpath_fmt+0x0/0x40) from [<c00416d4>]
(_init_omap_device+0x8c/0xac)
[    0.143981]  r3:c041cb8b r2:c04a498f

[    0.144012] [<c0041648>] (_init_omap_device+0x0/0xac) from [<c000ebec>]
(omap2_common_pm_init+0x58/0x88)
[    0.144012]  r6:c0567c00 r5:c0504578 r4:c0024ed4

[    0.144042] [<c000eb94>] (omap2_common_pm_init+0x0/0x88) from
[<c002e928>] (do_one_initcall+0xc0/0x194)
[    0.144073] [<c002e868>] (do_one_initcall+0x0/0x194) from [<c0008df0>]
(kernel_init+0x158/0x220)
[    0.144073]  r8:00000000 r7:00000013 r6:c0567c00 r5:c0504578 r4:c0024ed4

[    0.144104] [<c0008c98>] (kernel_init+0x0/0x220) from [<c005fc38>]
(do_exit+0x0/0x678)
[    0.144134]  r6:c005fc38 r5:c0008c98 r4:00000000 r3:00000000

[    0.144165] ---[ end trace 1b75b31a2719ed1e ]---

[    0.145080] I-pipe: Domain Xenomai registered.

[    0.145141] Xenomai: hal/arm started.

[    0.145416] Xenomai: scheduling class idle registered.

[    0.145416] Xenomai: scheduling class rt registered.

[    0.152740] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded.

[    0.152740] Xenomai: debug mode enabled.

[    0.158020] Xenomai: starting native API services.

[    0.158050] Xenomai: starting POSIX services.

[    0.158386] Xenomai: starting RTDM services.

[    0.158538] Xenomai: registered exported object RN#0 (regions)

[    0.158630] Xenomai: starting pSOS+ services.

[    0.158843] Xenomai: registered exported object heap0 (heaps)

[    0.158935] Xenomai: starting VRTX services.

[    0.158996] Xenomai: starting VxWorks services.

[    0.159088] Xenomai: starting uITRON services.

[    0.160308] VFS: Disk quotas dquot_6.5.2

[    0.160644] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.161956] msgmni has been set to 1511

[    0.162628] io scheduler noop registered

[    0.162628] io scheduler deadline registered

[    0.162811] io scheduler cfq registered (default)

[    0.163391] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP
UART0
[    0.290496] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP
UART1
[    0.450469] omap-hsuart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP
UART2
[    1.538085] console [ttyO2] enabled

[    1.690429] omap-hsuart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP
UART3
[    1.851196] usbcore: registered new interface driver smsc95xx

[    1.857238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.864257] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller

[    1.870269] ehci-omap ehci-omap.0: new USB bus registered, assigned bus
number 1
[    1.930511] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00

[    1.950378] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00

[    1.956481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.963592] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.971160] usb usb1: Product: OMAP-EHCI Host Controller

[    1.976745] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd

[    1.982574] usb usb1: SerialNumber: ehci-omap.0

[    1.987976] hub 1-0:1.0: USB hub found

[    1.991912] hub 1-0:1.0: 3 ports detected

[    2.020538] Initializing USB Mass Storage driver...

[    2.025878] usbcore: registered new interface driver usb-storage

[    2.032196] USB Mass Storage support registered.

[    2.037231] usbcore: registered new interface driver libusual

[    2.043243] i2c /dev entries driver

[    2.055603] TCP cubic registered

[    2.058990] Initializing XFRM netlink socket

[    2.063629] NET: Registered protocol family 17

[    2.068359] NET: Registered protocol family 15

[    2.073120] Registering the dns_resolver key type

[    2.078094] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 1
[    2.086486] ThumbEE CPU extension supported.

[    2.091033] Power Management for TI OMAP4.

[    2.095367] clock: disabling unused clocks to save power

[    2.102325] regulator_init_complete: incomplete constraints, leaving
VAUX3_6030 on
[    2.110839] regulator_init_complete: incomplete constraints, leaving
VAUX2_6030 on
[    2.119232] regulator_init_complete: incomplete constraints, leaving
VAUX1_6030 on
[    2.127624] regulator_init_complete: incomplete constraints, leaving VUSB
on
[    2.135528] regulator_init_complete: incomplete constraints, leaving VDAC
on
[    2.146423] regulator_init_complete: incomplete constraints, leaving
VCXIO on
[    2.154418] regulator_init_complete: incomplete constraints, leaving VANA
on
[    2.162322] regulator_init_complete: incomplete constraints, leaving
VUSIM on
[    2.170288] regulator_init_complete: incomplete constraints, leaving VPP
on
[    2.180603] Waiting for root device /dev/mmcblk0p2...

[    2.230255] mmc0: host does not support reading read-only switch.
assuming write-enable.
[    2.260437] mmc0: new high speed SDHC card at address e624

[    2.266662] mmcblk0: mmc0:e624 SD04G 3.69 GiB

[    2.275939]  mmcblk0: p1 p2

[    2.293518] EXT3-fs: barriers not enabled

[    2.310394] usb 1-1: new high speed USB device using ehci-omap and
address 2
[    2.486938] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

[    2.493988] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[    2.503295] hub 1-1:1.0: USB hub found

[    2.507415] hub 1-1:1.0: 5 ports detected

[    2.686828] kjournald starting.  Commit interval 5 seconds

[    2.686889] EXT3-fs (mmcblk0p2): warning: mounting fs with errors,
running e2fsck is recommended
[    2.703857] EXT3-fs (mmcblk0p2): using internal journal

[    2.709350] EXT3-fs (mmcblk0p2): recovery complete

[    2.716644] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data
mode
[    2.724090] VFS: Mounted root (ext3 filesystem) on device 179:2.

[    2.730438] Freeing init memory: 152K

[    2.790740] usb 1-1.1: new high speed USB device using ehci-omap and
address 3
[    2.921051] usb 1-1.1: New USB device found, idVendor=0424,
idProduct=ec00
[    2.928253] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[    2.938995] smsc95xx v1.0.4

[    3.005828] smsc95xx 1-1.1:1.0: usb0: register 'smsc95xx' at
usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 12:2a0
[    3.101013] usb 1-1.2: new low speed USB device using ehci-omap and
address 4
[    3.234893] usb 1-1.2: New USB device found, idVendor=413c,
idProduct=3012
[    3.242401] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    3.250488] usb 1-1.2: Product: Dell USB Optical Mouse

[    3.256347] usb 1-1.2: Manufacturer: Dell

[    3.340728] usb 1-1.3: new low speed USB device using ehci-omap and
address 5
[    3.475769] usb 1-1.3: New USB device found, idVendor=413c,
idProduct=2105
[    3.483520] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    3.491363] usb 1-1.3: Product: Dell USB Keyboard

[    3.496307] usb 1-1.3: Manufacturer: Dell


Ubuntu 11.04 omap ttyO2

omap login: cd /usr
Password:

Login incorrect
omap login: ubuntu
Password:
Last login: Wed Dec 31 19:00:24 EST 1969 on ttyO2
Welcome to Ubuntu 11.04 (GNU/Linux 2.6.37.6 armv7l)

 * Documentation:  https://help.ubuntu.com/
ubuntu@domain.hid:~$ cd /usr
ubuntu@domain.hid$ cd xenomai
ubuntu@domain.hid$ cd bin
ubuntu@domain.hid$ sh-xenotest
-bash: sh-xenotest: command not found
ubuntu@domain.hid$ sh -xeno-test
sh: Illegal option --
Current option settings
errexit         on
noglob          on
ignoreeof       on
interactive     on
monitor         on
noexec          on
stdin           on
xtrace          on
verbose         on
vi              on
emacs           on
noclobber       on
allexport       on
notify          on
nounset         on
nolog           on
debug           on
ubuntu@domain.hid$ sh xeno-test
xeno-test: started
withBusybox is 0
xeno-test: running tests

Wed Dec 31 19:05:27 EST 1969
running: ./xeno-config --verbose
xeno-config --verbose
        --version="2.5.6"
        --cc="arm-none-linux-gnueabi-gcc"
        --arch="arm"
        --prefix="/usr/xenomai"
        --xeno-cflags="-I/usr/xenomai/include -D_GNU_SOURCE -D_REENTRANT
-Wall -pipe -D__XENO__"
        --xeno-ldflags="-L/usr/xenomai/lib -lxenomai -lpthread "

        --posix-cflags=""

        --posix-ldflags="-Wl,@/usr/xenomai/lib/posix.wrappers
-L/usr/xenomai/lib -lpthread_rt -lxenomai -lpthread -lr"
        --library-dir="/usr/xenomai/lib"


Wed Dec 31 19:05:27 EST 1969
running: ./xeno-info
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux omap 2.6.37.6 #1 SMP PREEMPT Fri Jun 24 16:07:09 CEST 2011 armv7l
armv7l armv7l GNU/Linux


util-linux             ng 2.17.2)

mount                  ng 2.17.2 (with libblkid and selinux support)

module-init-tools      3.12

e2fsprogs              1.41.14

Linux C Library        > libc.2.13

Dynamic linker (ldd)   2.13

Procps                 3.2.8

Net-tools              1.60

Kbd                    1.15

Sh-utils               8.5

Modules Loaded


Wed Dec 31 19:05:28 EST 1969
running: cat /proc/cpuinfo
Processor       : ARMv7 Processor rev 2 (v7l)
processor       : 0
BogoMIPS        : 2011.95

processor       : 1
BogoMIPS        : 2011.95

Features        : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x1
CPU part        : 0xc09
CPU revision    : 2

Hardware        : OMAP4 Panda board
Revision        : 0020
Serial          : 0000000000000000

Wed Dec 31 19:05:28 EST 1969
running: md5sum /proc/cpuinfo # cpuinfo fingerprint
053aebd4e157828cc2cdc4754d70a06e  /proc/cpuinfo

Wed Dec 31 19:05:28 EST 1969
running: cat /proc/ipipe/Linux
       +----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
       |+---- Sticky
       ||+--- Locked
       |||+-- Exclusive
       ||||+- Virtual
[IRQ]  |||||
   0:  A....
   1:  A....
   2:  A....
   3:  A....
   4:  A....
   5:  A....
   6:  A....
   7:  A....
   8:  A....
   9:  A....
  10:  A....
  11:  A....
  12:  A....
  13:  A....
  14:  A....
  15:  A....
  16:  A....
  17:  A....
  18:  A....
  19:  A....
  20:  A....
  21:  A....
  22:  A....
  23:  A....
  24:  A....
  25:  A....
  26:  A....
  27:  A....
  28:  A....
  29:  A....
  30:  A....
  31:  A....
  32:  A....
  33:  A....
  34:  A....
  35:  A....
  36:  A....
  37:  A....
  38:  A....
  39:  A....
  40:  A....
  41:  A....
  42:  A....
  43:  A....
  44:  A....
  45:  A....
  46:  A....
  47:  A....
  48:  A....
  49:  A....
  50:  A....
  51:  A....
  52:  A....
  53:  A....
  54:  A....
  55:  A....
  56:  A....
  57:  A....
  58:  A....
  59:  A....
  60:  A....
  61:  A....
  62:  A....
  63:  A....
  64:  A....
  65:  A....
  66:  A....
  67:  A....
  68:  A....
  69:  A....
  70:  A....
  71:  A....
  72:  A....
  73:  A....
  74:  A....
  75:  A....
  76:  A....
  77:  A....
  78:  A....
  79:  A....
  80:  A....
  81:  A....
  82:  A....
  83:  A....
  84:  A....
  85:  A....
  86:  A....
  87:  A....
  88:  A....
  89:  A....
  90:  A....
  91:  A....
  92:  A....
  93:  A....
  94:  A....
  95:  A....
  96:  A....
  97:  A....
  98:  A....
  99:  A....
 100:  A....
 101:  A....
 102:  A....
 103:  A....
 104:  A....
 105:  A....
 106:  A....
 107:  A....
 108:  A....
 109:  A....
 110:  A....
 111:  A....
 112:  A....
 113:  A....
 114:  A....
 115:  A....
 116:  A....
 117:  A....
 118:  A....
 119:  A....
 120:  A....
 121:  A....
 122:  A....
 123:  A....
 124:  A....
 125:  A....
 126:  A....
 127:  A....
 128:  A....
 129:  A....
 130:  A....
 131:  A....
 132:  A....
 133:  A....
 134:  A....
 135:  A....
 136:  A....
 137:  A....
 138:  A....
 139:  A....
 140:  A....
 141:  A....
 142:  A....
 143:  A....
 144:  A....
 145:  A....
 146:  A....
 147:  A....
 148:  A....
 149:  A....
 150:  A....
 151:  A....
 152:  A....
 153:  A....
 154:  A....
 155:  A....
 156:  A....
 157:  A....
 158:  A....
 159:  A....
 160:  A....
 161:  A....
 162:  A....
 163:  A....
 164:  A....
 165:  A....
 166:  A....
 167:  A....
 168:  A....
 169:  A....
 170:  A....
 171:  A....
 172:  A....
 173:  A....
 174:  A....
 175:  A....
 176:  A....
 177:  A....
 178:  A....
 179:  A....
 180:  A....
 181:  A....
 182:  A....
 183:  A....
 184:  A....
 185:  A....
 186:  A....
 187:  A....
 188:  A....
 189:  A....
 190:  A....
 191:  A....
 192:  A....
 193:  A....
 194:  A....
 195:  A....
 196:  A....
 197:  A....
 198:  A....
 199:  A....
 200:  A....
 201:  A....
 202:  A....
 203:  A....
 204:  A....
 205:  A....
 206:  A....
 207:  A....
 208:  A....
 209:  A....
 210:  A....
 211:  A....
 212:  A....
 213:  A....
 214:  A....
 215:  A....
 216:  A....
 217:  A....
 218:  A....
 219:  A....
 220:  A....
 221:  A....
 222:  A....
 223:  A....
 224:  A....
 225:  A....
 226:  A....
 227:  A....
 228:  A....
 229:  A....
 230:  A....
 231:  A....
 232:  A....
 233:  A....
 234:  A....
 235:  A....
 236:  A....
 237:  A....
 238:  A....
 239:  A....
 240:  A....
 241:  A....
 242:  A....
 243:  A....
 244:  A....
 245:  A....
 246:  A....
 247:  A....
 248:  A....
 249:  A....
 250:  A....
 251:  A....
 252:  A....
 253:  A....
 254:  A....
 255:  A....
 256:  A....
 257:  A....
 258:  A....
 259:  A....
 260:  A....
 261:  A....
 262:  A....
 263:  A....
 264:  A....
 265:  A....
 266:  A....
 267:  A....
 268:  A....
 269:  A....
 270:  A....
 271:  A....
 272:  A....
 273:  A....
 274:  A....
 275:  A....
 276:  A....
 277:  A....
 278:  A....
 279:  A....
 280:  A....
 281:  A....
 282:  A....
 283:  A....
 284:  A....
 285:  A....
 286:  A....
 287:  A....
 288:  A....
 289:  A....
 290:  A....
 291:  A....
 292:  A....
 293:  A....
 294:  A....
 295:  A....
 296:  A....
 297:  A....
 298:  A....
 299:  A....
 300:  A....
 301:  A....
 302:  A....
 303:  A....
 304:  A....
 305:  A....
 306:  A....
 307:  A....
 308:  A....
 309:  A....
 310:  A....
 311:  A....
 312:  A....
 313:  A....
 314:  A....
 315:  A....
 316:  A....
 317:  A....
 318:  A....
 319:  A....
 320:  A....
 321:  A....
 322:  A....
 323:  A....
 324:  A....
 325:  A....
 326:  A....
 327:  A....
 328:  A....
 329:  A....
 330:  A....
 331:  A....
 332:  A....
 333:  A....
 334:  A....
 335:  A....
 336:  A....
 337:  A....
 338:  A....
 339:  A....
 340:  A....
 341:  A....
 342:  A....
 343:  A....
 344:  A....
 345:  A....
 346:  A....
 347:  A....
 348:  A....
 349:  A....
 350:  A....
 351:  A....
 352:  A....
 353:  A....
 354:  A....
 355:  A....
 356:  A....
 357:  A....
 358:  A....
 359:  A....
 360:  A....
 361:  A....
 362:  A....
 363:  A....
 364:  A....
 365:  A....
 366:  A....
 367:  A....
 368:  A....
 369:  A....
 370:  A....
 371:  A....
 372:  A....
 373:  A....
 374:  A....
 375:  A....
 376:  A....
 377:  A....
 378:  A....
 379:  A....
 380:  A....
 381:  A....
 382:  A....
 383:  A....
 384:  A....
 385:  A....
 386:  A....
 387:  A....
 388:  A....
 389:  A....
 390:  A....
 391:  A....
 392:  A....
 393:  A....
 394:  A....
 395:  A....
 396:  A....
 397:  A....
 398:  A....
 399:  A....
 400:  A....
 401:  A....
 416:  GS..V
 421:  GS..V
 422:  G...V
 423:  G...V
[Domain info]
id=0x00000000
priority=100

Wed Dec 31 19:05:28 EST 1969
running: cat /proc/ipipe/Xenomai
       +----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
       |+---- Sticky
       ||+--- Locked
       |||+-- Exclusive
       ||||+- Virtual
[IRQ]  |||||
  29:  W..X.
 416:  GS..V
 417:  W...V
 420:  W..XV
 421:  GS..V
 424:  W...V
[Domain info]
id=0x58454e4f
priority=topmost

Wed Dec 31 19:05:28 EST 1969
running: cat /proc/ipipe/version
1.18-03

Wed Dec 31 19:05:28 EST 1969
running: generate_loads 1
dd workload started, pids 3150 stored in /var/lock/xeno-test.3025.pids
 3150 ttyO2    00:00:00 dd
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or
something died a 3150 or





Thanks

Suresh balijepalli
Rosenehim,Baveria.

[-- Attachment #2: Type: text/html, Size: 76354 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [Xenomai-help] Regarding xeno test (somethign died at 3150)
  2011-07-11 16:06 [Xenomai-help] Regarding xeno test (somethign died at 3150) suresh reddy
@ 2011-07-11 17:57 ` Gilles Chanteperdrix
  2011-07-11 18:59   ` suresh reddy
  0 siblings, 1 reply; 8+ messages in thread
From: Gilles Chanteperdrix @ 2011-07-11 17:57 UTC (permalink / raw)
  To: suresh reddy; +Cc: Xenomai help

On 07/11/2011 06:06 PM, suresh reddy wrote:
> Dear Xenomai Team,
> 
> I run the xeno-test on pandaboard and it giving me the mentioned error.

Please do not run xeno-test. Run the "latency" test directly instead,
typing:

/usr/bin/latency

And run some load in the background using a combination of network load
using netcat, disk load using dd, and cpu/cache load using hackbench.

-- 
                                                                Gilles.


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [Xenomai-help] Regarding xeno test (somethign died at 3150)
  2011-07-11 17:57 ` Gilles Chanteperdrix
@ 2011-07-11 18:59   ` suresh reddy
  2011-07-11 19:02     ` Gilles Chanteperdrix
  0 siblings, 1 reply; 8+ messages in thread
From: suresh reddy @ 2011-07-11 18:59 UTC (permalink / raw)
  To: Gilles Chanteperdrix; +Cc: Xenomai help

[-- Attachment #1: Type: text/plain, Size: 831 bytes --]

Dear Giles,

i have another doubt regarding configuration of kernel.

as far as i see you did not configure any pandaboard display options . i
mean hdmi kind of optins . so we can acces only through console??



On 11 July 2011 19:57, Gilles Chanteperdrix <
gilles.chanteperdrix@xenomai.org> wrote:

> On 07/11/2011 06:06 PM, suresh reddy wrote:
> > Dear Xenomai Team,
> >
> > I run the xeno-test on pandaboard and it giving me the mentioned error.
>
> Please do not run xeno-test. Run the "latency" test directly instead,
> typing:
>
> /usr/bin/latency
>
> And run some load in the background using a combination of network load
> using netcat, disk load using dd, and cpu/cache load using hackbench.
>
> --
>                                                                 Gilles.
>



-- 

Suresh balijepalli
Rosenehim,Baveria.

[-- Attachment #2: Type: text/html, Size: 1296 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [Xenomai-help] Regarding xeno test (somethign died at 3150)
  2011-07-11 18:59   ` suresh reddy
@ 2011-07-11 19:02     ` Gilles Chanteperdrix
  2011-07-12  8:59       ` suresh reddy
  0 siblings, 1 reply; 8+ messages in thread
From: Gilles Chanteperdrix @ 2011-07-11 19:02 UTC (permalink / raw)
  To: suresh reddy; +Cc: Xenomai help

On 07/11/2011 08:59 PM, suresh reddy wrote:
> Dear Giles,
> 
> i have another doubt regarding configuration of kernel.
> 
> as far as i see you did not configure any pandaboard display options . i
> mean hdmi kind of optins . so we can acces only through console??

Configuring the kernel for your particular needs is your job. The
configuration I sent you is the one which suits my needs.

-- 
                                                                Gilles.


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [Xenomai-help] Regarding xeno test (somethign died at 3150)
  2011-07-11 19:02     ` Gilles Chanteperdrix
@ 2011-07-12  8:59       ` suresh reddy
  2011-07-12  9:24         ` [Xenomai-help] Fwd: " suresh reddy
  0 siblings, 1 reply; 8+ messages in thread
From: suresh reddy @ 2011-07-12  8:59 UTC (permalink / raw)
  To: Gilles Chanteperdrix; +Cc: Xenomai help

[-- Attachment #1: Type: text/plain, Size: 817 bytes --]

Dear Giles,

/usr/bin/latency  results in command not found.

ubuntu@domain.hid$ latency
-bash: latency: command not found


ubuntu@domain.hid$ latency
-bash: latency: command not found







On 11 July 2011 21:02, Gilles Chanteperdrix <
gilles.chanteperdrix@xenomai.org> wrote:

> On 07/11/2011 08:59 PM, suresh reddy wrote:
> > Dear Giles,
> >
> > i have another doubt regarding configuration of kernel.
> >
> > as far as i see you did not configure any pandaboard display options . i
> > mean hdmi kind of optins . so we can acces only through console??
>
> Configuring the kernel for your particular needs is your job. The
> configuration I sent you is the one which suits my needs.
>
> --
>                                                                 Gilles.
>



-- 

Suresh balijepalli
Rosenehim,Baveria.

[-- Attachment #2: Type: text/html, Size: 1448 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [Xenomai-help] Fwd:  Regarding xeno test (somethign died at 3150)
  2011-07-12  8:59       ` suresh reddy
@ 2011-07-12  9:24         ` suresh reddy
  2011-07-12 10:58           ` Gilles Chanteperdrix
  0 siblings, 1 reply; 8+ messages in thread
From: suresh reddy @ 2011-07-12  9:24 UTC (permalink / raw)
  To: Gilles Chanteperdrix; +Cc: Xenomai help

[-- Attachment #1: Type: text/plain, Size: 1383 bytes --]

Dear Giles,

/usr/bin/latency  results in command not found.

ubuntu@domain.hid$ sudo ./clocktest
[sudo] password for ubuntu:
Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
(modprobe xeno_nucleus?)
ubuntu@domain.hid$ sudo ./latency
[sudo] password for ubuntu:
Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
(modprobe xeno_nucleus?)
ubuntu@domain.hid$ modprobe xeno_nucleus
FATAL: Module xeno_nucleus not found.
ubuntu@domain.hid$ cd
ubuntu@domain.hid:~$ /usr/bin
-bash: /usr/bin: Is a directory
ubuntu@domain.hid:~$ cd /usr/bin
ubuntu@domain.hid$ sudo ./latency
[sudo] password for ubuntu:
sudo: ./latency: command not found
ubuntu@domain.hid$


But the configuration has config_XENO_OPT_PERVASIVE=y













On 11 July 2011 21:02, Gilles Chanteperdrix <
gilles.chanteperdrix@xenomai.org> wrote:

> On 07/11/2011 08:59 PM, suresh reddy wrote:
> > Dear Giles,
> >
> > i have another doubt regarding configuration of kernel.
> >
> > as far as i see you did not configure any pandaboard display options . i
> > mean hdmi kind of optins . so we can acces only through console??
>
> Configuring the kernel for your particular needs is your job. The
> configuration I sent you is the one which suits my needs.
>
> --
>                                                                 Gilles.
>



-- 

Suresh balijepalli
Rosenehim,Baveria.



-- 

Suresh balijepalli
Rosenehim,Baveria.

[-- Attachment #2: Type: text/html, Size: 2412 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [Xenomai-help] Fwd: Regarding xeno test (somethign died at 3150)
  2011-07-12  9:24         ` [Xenomai-help] Fwd: " suresh reddy
@ 2011-07-12 10:58           ` Gilles Chanteperdrix
  2011-07-12 12:12             ` suresh reddy
  0 siblings, 1 reply; 8+ messages in thread
From: Gilles Chanteperdrix @ 2011-07-12 10:58 UTC (permalink / raw)
  To: suresh reddy; +Cc: Xenomai help

On 07/12/2011 11:24 AM, suresh reddy wrote:
> Dear Giles,
> 
> /usr/bin/latency  results in command not found.
> 
> ubuntu@domain.hid$ sudo ./clocktest
> [sudo] password for ubuntu:
> Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
> (modprobe xeno_nucleus?)
> ubuntu@domain.hid$ sudo ./latency
> [sudo] password for ubuntu:
> Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
> (modprobe xeno_nucleus?)
> ubuntu@domain.hid$ modprobe xeno_nucleus
> FATAL: Module xeno_nucleus not found.
> ubuntu@domain.hid$ cd
> ubuntu@domain.hid:~$ /usr/bin
> -bash: /usr/bin: Is a directory
> ubuntu@domain.hid:~$ cd /usr/bin
> ubuntu@domain.hid$ sudo ./latency
> [sudo] password for ubuntu:
> sudo: ./latency: command not found
> ubuntu@domain.hid$
> 
> 
> But the configuration has config_XENO_OPT_PERVASIVE=y

Your user-space support is mis-compiled. See README.INSTALL for an
explanation of the ARM specific options to be passed to the configure
script.

-- 
                                                                Gilles.


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [Xenomai-help] Fwd: Regarding xeno test (somethign died at 3150)
  2011-07-12 10:58           ` Gilles Chanteperdrix
@ 2011-07-12 12:12             ` suresh reddy
  0 siblings, 0 replies; 8+ messages in thread
From: suresh reddy @ 2011-07-12 12:12 UTC (permalink / raw)
  To: Gilles Chanteperdrix

[-- Attachment #1: Type: text/plain, Size: 1530 bytes --]

On 12 July 2011 12:58, Gilles Chanteperdrix <
gilles.chanteperdrix@xenomai.org> wrote:

> On 07/12/2011 11:24 AM, suresh reddy wrote:
> > Dear Giles,
> >
> > /usr/bin/latency  results in command not found.
> >
> > ubuntu@domain.hid$ sudo ./clocktest
> > [sudo] password for ubuntu:
> > Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
> > (modprobe xeno_nucleus?)
> > ubuntu@domain.hid$ sudo ./latency
> > [sudo] password for ubuntu:
> > Xenomai or CONFIG_XENO_OPT_PERVASIVE disabled.
> > (modprobe xeno_nucleus?)
> > ubuntu@domain.hid$ modprobe xeno_nucleus
> > FATAL: Module xeno_nucleus not found.
> > ubuntu@domain.hid$ cd
> > ubuntu@domain.hid:~$ /usr/bin
> > -bash: /usr/bin: Is a directory
> > ubuntu@domain.hid:~$ cd /usr/bin
> > ubuntu@domain.hid$ sudo ./latency
> > [sudo] password for ubuntu:
> > sudo: ./latency: command not found
> > ubuntu@domain.hid$
> >
> >
> > But the configuration has config_XENO_OPT_PERVASIVE=y
>
> Your user-space support is mis-compiled. See README.INSTALL for an
> explanation of the ARM specific options to be passed to the configure
> script.
>
> --
>                                                                 Gilles.
>

I have passed all the options even they were mentioned weak in documentation
.

/media/disk-5/usr/bin# /home/balijepalli/omap4/xenomai-2.5.6/configure
--build=i486-pc-linux-gnu --host=arm-none-linux-gnueabi
--enable-arm-mach=omap3 --enable-arm-tsc --enable-arm-eabi
--enable-arm-arch=armv7

does this have any error.



-- 

Suresh balijepalli
Rosenehim,Baveria.

[-- Attachment #2: Type: text/html, Size: 2160 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2011-07-12 12:12 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-07-11 16:06 [Xenomai-help] Regarding xeno test (somethign died at 3150) suresh reddy
2011-07-11 17:57 ` Gilles Chanteperdrix
2011-07-11 18:59   ` suresh reddy
2011-07-11 19:02     ` Gilles Chanteperdrix
2011-07-12  8:59       ` suresh reddy
2011-07-12  9:24         ` [Xenomai-help] Fwd: " suresh reddy
2011-07-12 10:58           ` Gilles Chanteperdrix
2011-07-12 12:12             ` suresh reddy

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.