* [PATCH] fstests: regression test for btrfs buffered read's repair
@ 2017-04-12 1:27 Liu Bo
2017-04-12 9:45 ` Filipe Manana
0 siblings, 1 reply; 2+ messages in thread
From: Liu Bo @ 2017-04-12 1:27 UTC (permalink / raw)
To: fstests; +Cc: linux-btrfs
This case tests whether buffered read can repair the bad copy if we
have a good copy.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
---
tests/btrfs/141 | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/141.out | 39 ++++++++++++++
tests/btrfs/group | 1 +
3 files changed, 192 insertions(+)
create mode 100755 tests/btrfs/141
create mode 100644 tests/btrfs/141.out
diff --git a/tests/btrfs/141 b/tests/btrfs/141
new file mode 100755
index 0000000..53fd75c
--- /dev/null
+++ b/tests/btrfs/141
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test 141
+#
+# Regression test for btrfs buffered read's repair during read.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Liu Bo. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch_dev_pool 2
+_require_command "$BTRFS_MAP_LOGICAL_PROG" btrfs-map-logical
+_require_command "$FILEFRAG_PROG" filefrag
+
+# helpe to convert 'file offset' to btrfs logical offset
+FILEFRAG_FILTER='
+ if (/blocks? of (\d+) bytes/) {
+ $blocksize = $1;
+ next
+ }
+ ($ext, $logical, $physical, $length) =
+ (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
+ or next;
+ ($flags) = /.*:\s*(\S*)$/;
+ print $physical * $blocksize, "#",
+ $length * $blocksize, "#",
+ $logical * $blocksize, "#",
+ $flags, " "'
+
+# this makes filefrag output script readable by using a perl helper.
+# output is one extent per line, with three numbers separated by '#'
+# the numbers are: physical, length, logical (all in bytes)
+# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
+_filter_extents()
+{
+ tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
+}
+
+_check_file_extents()
+{
+ cmd="filefrag -v $1"
+ echo "# $cmd" >> $seqres.full
+ out=`$cmd | _filter_extents`
+ if [ -z "$out" ]; then
+ return 1
+ fi
+ echo "after filter: $out" >> $seqres.full
+ echo $out
+ return 0
+}
+
+_check_repair()
+{
+ filter=${1:-cat}
+ dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
+ if [ $? -eq 0 ]; then
+ echo 1
+ else
+ echo 0
+ fi
+}
+
+_scratch_dev_pool_get 2
+# step 1, create a raid1 btrfs which contains one 128k file.
+echo "step 1......mkfs.btrfs" >>$seqres.full
+
+mkfs_opts="-d raid1"
+_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
+
+_scratch_mount -o nospace_cache
+
+$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
+
+sync
+
+# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
+# one in $SCRATCH_DEV_POOL
+echo "step 2......corrupt file extent" >>$seqres.full
+
+extents=`_check_file_extents $SCRATCH_MNT/foobar`
+logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
+physical_on_scratch=`$BTRFS_MAP_LOGICAL_PROG -l ${logical_in_btrfs} $SCRATCH_DEV | grep "$SCRATCH_DEV" | awk '{print $6}'`
+
+_scratch_unmount
+$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_mount -o nospace_cache
+
+# step 3, 128k dio read (this read can repair bad copy)
+echo "step 3......repair the bad copy" >>$seqres.full
+
+# since raid1 consists of two copies, and the following read may read the good
+# copy directly, so lets loop 10 times here and discard output that dio reads
+# give
+for i in `seq 1 10`; do
+ echo 3 > /proc/sys/vm/drop_caches
+ $XFS_IO_PROG -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
+ repair=`_check_repair`
+ if [ $repair -eq 1 ]; then
+ break
+ fi
+done
+
+_scratch_unmount
+
+# check if the repair works
+$XFS_IO_PROG -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_dev_pool_put
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/141.out b/tests/btrfs/141.out
new file mode 100644
index 0000000..6b780ac
--- /dev/null
+++ b/tests/btrfs/141.out
@@ -0,0 +1,39 @@
+QA output created by 141
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 244056064
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+0e8c0000: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0010: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0020: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0030: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0040: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0050: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0060: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0070: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0080: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0090: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0100: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0110: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0120: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0130: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0140: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0150: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0160: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0170: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0180: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0190: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+read 512/512 bytes at offset 244056064
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 1cb9c98..7b380e5 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -142,3 +142,4 @@
138 auto compress
139 auto qgroup
140 auto quick
+141 auto quick
--
2.5.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] fstests: regression test for btrfs buffered read's repair
2017-04-12 1:27 [PATCH] fstests: regression test for btrfs buffered read's repair Liu Bo
@ 2017-04-12 9:45 ` Filipe Manana
0 siblings, 0 replies; 2+ messages in thread
From: Filipe Manana @ 2017-04-12 9:45 UTC (permalink / raw)
To: Liu Bo; +Cc: fstests, linux-btrfs
On Wed, Apr 12, 2017 at 2:27 AM, Liu Bo <bo.li.liu@oracle.com> wrote:
> This case tests whether buffered read can repair the bad copy if we
> have a good copy.
Regardless of being a test we should have always had (thanks for
this!), it would be useful to mention we had a regression (as the test
description in the btrfs/141 file says) and which patch fixed it (and
possibly which kernel version or patch/commit introduced the
regression).
Just a couple comments/questions below.
>
> Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
> ---
> tests/btrfs/141 | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/141.out | 39 ++++++++++++++
> tests/btrfs/group | 1 +
> 3 files changed, 192 insertions(+)
> create mode 100755 tests/btrfs/141
> create mode 100644 tests/btrfs/141.out
>
> diff --git a/tests/btrfs/141 b/tests/btrfs/141
> new file mode 100755
> index 0000000..53fd75c
> --- /dev/null
> +++ b/tests/btrfs/141
> @@ -0,0 +1,152 @@
> +#! /bin/bash
> +# FS QA Test 141
> +#
> +# Regression test for btrfs buffered read's repair during read.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Liu Bo. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch_dev_pool 2
> +_require_command "$BTRFS_MAP_LOGICAL_PROG" btrfs-map-logical
> +_require_command "$FILEFRAG_PROG" filefrag
> +
> +# helpe to convert 'file offset' to btrfs logical offset
> +FILEFRAG_FILTER='
> + if (/blocks? of (\d+) bytes/) {
> + $blocksize = $1;
> + next
> + }
> + ($ext, $logical, $physical, $length) =
> + (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> + or next;
> + ($flags) = /.*:\s*(\S*)$/;
> + print $physical * $blocksize, "#",
> + $length * $blocksize, "#",
> + $logical * $blocksize, "#",
> + $flags, " "'
> +
> +# this makes filefrag output script readable by using a perl helper.
> +# output is one extent per line, with three numbers separated by '#'
> +# the numbers are: physical, length, logical (all in bytes)
> +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> +_filter_extents()
> +{
> + tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> +}
> +
> +_check_file_extents()
> +{
> + cmd="filefrag -v $1"
> + echo "# $cmd" >> $seqres.full
> + out=`$cmd | _filter_extents`
> + if [ -z "$out" ]; then
> + return 1
> + fi
> + echo "after filter: $out" >> $seqres.full
> + echo $out
> + return 0
> +}
> +
> +_check_repair()
> +{
> + filter=${1:-cat}
> + dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
> + if [ $? -eq 0 ]; then
> + echo 1
> + else
> + echo 0
> + fi
> +}
> +
> +_scratch_dev_pool_get 2
> +# step 1, create a raid1 btrfs which contains one 128k file.
> +echo "step 1......mkfs.btrfs" >>$seqres.full
> +
> +mkfs_opts="-d raid1"
> +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> +
> +_scratch_mount -o nospace_cache
Same as the other test, why do we need to mount without space cache?
It isn't obvious if it's needed nor why - a comment in the test
explaining why would be useful for everyone.
> +
> +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> +
> +sync
> +
> +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> +# one in $SCRATCH_DEV_POOL
> +echo "step 2......corrupt file extent" >>$seqres.full
> +
> +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> +physical_on_scratch=`$BTRFS_MAP_LOGICAL_PROG -l ${logical_in_btrfs} $SCRATCH_DEV | grep "$SCRATCH_DEV" | awk '{print $6}'`
> +
> +_scratch_unmount
> +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_mount -o nospace_cache
> +
> +# step 3, 128k dio read (this read can repair bad copy)
dio read -> buffered read
> +echo "step 3......repair the bad copy" >>$seqres.full
> +
> +# since raid1 consists of two copies, and the following read may read the good
> +# copy directly, so lets loop 10 times here and discard output that dio reads
dio reads -> buffered reads
thanks!
> +# give
> +for i in `seq 1 10`; do
> + echo 3 > /proc/sys/vm/drop_caches
> + $XFS_IO_PROG -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> + repair=`_check_repair`
> + if [ $repair -eq 1 ]; then
> + break
> + fi
> +done
> +
> +_scratch_unmount
> +
> +# check if the repair works
> +$XFS_IO_PROG -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> +
> +_scratch_dev_pool_put
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/141.out b/tests/btrfs/141.out
> new file mode 100644
> index 0000000..6b780ac
> --- /dev/null
> +++ b/tests/btrfs/141.out
> @@ -0,0 +1,39 @@
> +QA output created by 141
> +wrote 131072/131072 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +wrote 65536/65536 bytes at offset 244056064
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +0e8c0000: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0010: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0020: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0030: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0040: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0050: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0060: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0070: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0080: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0090: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c00a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c00b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c00c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c00d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c00e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c00f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0100: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0110: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0120: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0130: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0140: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0150: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0160: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0170: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0180: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c0190: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c01a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c01b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c01c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c01d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c01e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +0e8c01f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> +read 512/512 bytes at offset 244056064
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 1cb9c98..7b380e5 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -142,3 +142,4 @@
> 138 auto compress
> 139 auto qgroup
> 140 auto quick
> +141 auto quick
> --
> 2.5.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Filipe David Manana,
“Whether you think you can, or you think you can't — you're right.”
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-04-12 9:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-12 1:27 [PATCH] fstests: regression test for btrfs buffered read's repair Liu Bo
2017-04-12 9:45 ` Filipe Manana
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.