All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robert Jones <rjones@gateworks.com>
To: ath10k <ath10k@lists.infradead.org>
Subject: Problems Configuring VHT160 and VHT80+80 for QCA9984
Date: Thu, 11 Jan 2018 17:46:09 -0800	[thread overview]
Message-ID: <CALAE=UDvCnuTK_mFJsdPccTbb6gxHmd_aw4HmL8mdvLZ3VL_mA@mail.gmail.com> (raw)

Hello,

I'm working with a WLE1216V5-20 ath10k wave 2 card using QCA9984
chipset and having problems configuring an AP for VHT160 or 80+80
mode. The hostapd v2.6 tool in both cases tells me that the "Driver
does not support configured VHT capability".

I'm using the custom board and firmware .bin files found at
http://www.candelatech.com/ath10k-10.4.php. I see on the same page
that they recommend using one of Ben Greear's kernels but I would
prefer to stick with a mainline 4.14 if possible.

Is this capability truly missing from the ath10k driver or am I
misconfiguring something in my hostapd.conf?

If the former, can anyone point me to a patch set that I can apply to
the ath10k driver to support either of these two modes?

Regards,
Robert Jones

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2018-01-12  1:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-12  1:46 Robert Jones [this message]
2018-01-12 15:28 ` Problems Configuring VHT160 and VHT80+80 for QCA9984 Ben Greear
2018-01-12 16:31   ` Sebastian Gottschall
2018-01-12 17:39     ` Robert Jones
2018-01-12 22:46       ` Sebastian Gottschall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALAE=UDvCnuTK_mFJsdPccTbb6gxHmd_aw4HmL8mdvLZ3VL_mA@mail.gmail.com' \
    --to=rjones@gateworks.com \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.