SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

Since svn.o-hand.com is dead does anyone have a different repository?

SRC_URI = "git://git.yoctoproject.org/matchbox-keyboard;protocol=git \
           file://smallscreen-fontsize.patch;patch=1 \
           file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1
\
           file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1
\
           file://4-Add-rendering-debug-logging.patch;patch=1 \
           file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1
\
           file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1 \
          "

I am unable to find any source for these. It sure seems to me that OE
is overly dependent upon links that come and go.


-- 
Dave Thomas
MicroBee Systems, Inc
1429 Weatherly Road, Suite G
Huntsville, AL 35803-1187
256-489-6671 (Voice)
256-426-2431 (Mobile)
256-489-6673 (FAX)
www.microbee-systems.com
"Innovative Solutions for an Embedded World"

This message is intended for the sole use of the addressee, and may
contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the addressee you are
hereby notified that you may not use, copy, disclose, or distribute to
anyone the message or any information contained in the message. If you
have received this message in error, please immediately advise the
sender by reply email and delete this message.

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Wednesday 09 November 2011 16:32:48 David Thomas wrote:
> Since svn.o-hand.com is dead does anyone have a different repository?

Most if not all o-hand repositories have been converted to git and moved to 
git.yoctoproject.org. A list of what's available:

 http://git.yoctoproject.org/cgit/cgit.cgi/
 
> SRC_URI = "git://git.yoctoproject.org/matchbox-keyboard;protocol=git \

This works for me... ?

> I am unable to find any source for these. It sure seems to me that OE
> is overly dependent upon links that come and go.

It is if you don't use a mirror. Realistically with the wide range of software 
from hundreds of different providers built in OE there's no way you can expect 
all of them to not change their download locations, remove old versions, etc. 
over time. That's why we have mirror support, and both Angstrom and the Yocto 
Project provide mirrors already.

If you really want to ensure long-term support you may want to consider 
setting up your own local mirror; it's fairly easy to do.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

I appreciate the response. Yes, I found this but it would seem this is related to the patches listed in that file I included.

I will press on.  

Dave


On Nov 10, 2011, at 3:58 AM, Paul Eggleton wrote:

> On Wednesday 09 November 2011 16:32:48 David Thomas wrote:
>> Since svn.o-hand.com is dead does anyone have a different repository?
> 
> Most if not all o-hand repositories have been converted to git and moved to 
> git.yoctoproject.org. A list of what's available:
> 
> http://git.yoctoproject.org/cgit/cgit.cgi/
> 
>> SRC_URI = "git://git.yoctoproject.org/matchbox-keyboard;protocol=git \
> 
> This works for me... ?
> 
>> I am unable to find any source for these. It sure seems to me that OE
>> is overly dependent upon links that come and go.
> 
> It is if you don't use a mirror. Realistically with the wide range of software 
> from hundreds of different providers built in OE there's no way you can expect 
> all of them to not change their download locations, remove old versions, etc. 
> over time. That's why we have mirror support, and both Angstrom and the Yocto 
> Project provide mirrors already.
> 
> If you really want to ensure long-term support you may want to consider 
> setting up your own local mirror; it's fairly easy to do.
> 
> Cheers,
> Paul
> 
> -- 
> 
> Paul Eggleton
> Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

I have tried every possible way, 8 hours so far, to get this file to
process these patches. I got the patches, I have set up local
repositories, ad nasium and same response, unable to fetch from any
source.

I have tired every combination, I have tried every possible link, url,

SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"

git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen-fontsize.patch;patch=1

and on and on. Every single project I have seen references the same


SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http \

I am at the point of hurling this machine out a window. How could this
be so cryptic and difficult?

Does anyone have a idea?

DESCRIPTION = "Matchbox virtual keyboard for X11"
LICENSE = "GPL"
DEPENDS = "libfakekey expat libxft"
RCONFLICTS = matchbox-keyboard-inputmethod
RPROVIDES_${PN} = matchbox-keyboard-inputmethod
SECTION = "x11"
PV = "0.0+svnr${SRCPV}"
PR ="r7"

SRC_URI = "https://git.gitorious.org/cm-t3530/cm-t3530.git;protocol=git \
           file://smallscreen-fontsize.patch;patch=1 \
           file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1
\
           file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1
\
           file://4-Add-rendering-debug-logging.patch;patch=1 \
           file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1
\
           file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1 \
          "


S = "${WORKDIR}/${PN}"

inherit autotools pkgconfig gettext

EXTRA_OECONF = "--disable-cairo"

FILES_${PN} = "${bindir}/* \
	       ${datadir}/applications \
	       ${datadir}/pixmaps \
	       ${datadir}/matchbox-keyboard"

On Thu, Nov 10, 2011 at 6:35 AM, David Thomas
<david.thomas@microbee-systems.com> wrote:
> I appreciate the response. Yes, I found this but it would seem this is related to the patches listed in that file I included.
>
> I will press on.
>
> Dave
>
>
> On Nov 10, 2011, at 3:58 AM, Paul Eggleton wrote:
>
>> On Wednesday 09 November 2011 16:32:48 David Thomas wrote:
>>> Since svn.o-hand.com is dead does anyone have a different repository?
>>
>> Most if not all o-hand repositories have been converted to git and moved to
>> git.yoctoproject.org. A list of what's available:
>>
>> http://git.yoctoproject.org/cgit/cgit.cgi/
>>
>>> SRC_URI = "git://git.yoctoproject.org/matchbox-keyboard;protocol=git \
>>
>> This works for me... ?
>>
>>> I am unable to find any source for these. It sure seems to me that OE
>>> is overly dependent upon links that come and go.
>>
>> It is if you don't use a mirror. Realistically with the wide range of software
>> from hundreds of different providers built in OE there's no way you can expect
>> all of them to not change their download locations, remove old versions, etc.
>> over time. That's why we have mirror support, and both Angstrom and the Yocto
>> Project provide mirrors already.
>>
>> If you really want to ensure long-term support you may want to consider
>> setting up your own local mirror; it's fairly easy to do.
>>
>> Cheers,
>> Paul
>>
>> --
>>
>> Paul Eggleton
>> Intel Open Source Technology Centre
>
>



-- 
Dave Thomas
MicroBee Systems, Inc
1429 Weatherly Road, Suite G
Huntsville, AL 35803-1187
256-489-6671 (Voice)
256-426-2431 (Mobile)
256-489-6673 (FAX)
www.microbee-systems.com
"Innovative Solutions for an Embedded World"

This message is intended for the sole use of the addressee, and may
contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the addressee you are
hereby notified that you may not use, copy, disclose, or distribute to
anyone the message or any information contained in the message. If you
have received this message in error, please immediately advise the
sender by reply email and delete this message.

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Menzel]

[-- Attachment #1: Type: text/plain, Size: 2090 bytes --]

Am Donnerstag, den 10.11.2011, 16:11 -0600 schrieb David Thomas:
> I have tried every possible way, 8 hours so far, to get this file to
> process these patches. I got the patches, I have set up local
> repositories, ad nasium and same response, unable to fetch from any
> source.
> 
> I have tired every combination, I have tried every possible link, url,
> 
> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
> 
> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen-fontsize.patch;patch=1
> 
> and on and on. Every single project I have seen references the same
> 
> 
> SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http \
> 
> I am at the point of hurling this machine out a window. How could this
> be so cryptic and difficult?
> 
> Does anyone have a idea?
> 
> DESCRIPTION = "Matchbox virtual keyboard for X11"
> LICENSE = "GPL"
> DEPENDS = "libfakekey expat libxft"
> RCONFLICTS = matchbox-keyboard-inputmethod
> RPROVIDES_${PN} = matchbox-keyboard-inputmethod
> SECTION = "x11"
> PV = "0.0+svnr${SRCPV}"
> PR ="r7"
> 
> SRC_URI = "https://git.gitorious.org/cm-t3530/cm-t3530.git;protocol=git \
>            file://smallscreen-fontsize.patch;patch=1 \
>            file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1
> \

Please turn off line wrapping.

>            file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1
> \
>            file://4-Add-rendering-debug-logging.patch;patch=1 \
>            file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1
> \
>            file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1 \
>           "

Where do you have these files stored?

> S = "${WORKDIR}/${PN}"
> 
> inherit autotools pkgconfig gettext
> 
> EXTRA_OECONF = "--disable-cairo"
> 
> FILES_${PN} = "${bindir}/* \
> 	       ${datadir}/applications \
> 	       ${datadir}/pixmaps \
> 	       ${datadir}/matchbox-keyboard"


Thanks,

Paul

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 205 bytes --]

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

On Nov 10, 2011, at 5:04 PM, Paul Menzel wrote:

> Am Donnerstag, den 10.11.2011, 16:11 -0600 schrieb David Thomas:
>> I have tried every possible way, 8 hours so far, to get this file to
>> process these patches. I got the patches, I have set up local
>> repositories, ad nasium and same response, unable to fetch from any
>> source.
>> 
>> I have tired every combination, I have tried every possible link, url,
>> 
>> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
>> 
>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen-fontsize.patch;patch=1
>> 
>> and on and on. Every single project I have seen references the same
>> 
>> 
>> SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http \
>> 
>> I am at the point of hurling this machine out a window. How could this
>> be so cryptic and difficult?
>> 
>> Does anyone have a idea?
>> 
>> DESCRIPTION = "Matchbox virtual keyboard for X11"
>> LICENSE = "GPL"
>> DEPENDS = "libfakekey expat libxft"
>> RCONFLICTS = matchbox-keyboard-inputmethod
>> RPROVIDES_${PN} = matchbox-keyboard-inputmethod
>> SECTION = "x11"
>> PV = "0.0+svnr${SRCPV}"
>> PR ="r7"
>> 
>> SRC_URI = "https://git.gitorious.org/cm-t3530/cm-t3530.git;protocol=git \
>>           file://smallscreen-fontsize.patch;patch=1 \
>>           file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1\
>>           file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1 \
>>           file://4-Add-rendering-debug-logging.patch;patch=1 \
>>           file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1 \
>>           file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1 \
>>          "
> 
> Where do you have these files stored?

     $OEBASE/sources or /home/twoods/sources
> 
>> S = "${WORKDIR}/${PN}"
>> 
>> inherit autotools pkgconfig gettext
>> 
>> EXTRA_OECONF = "--disable-cairo"
>> 
>> FILES_${PN} = "${bindir}/* \
>> 	       ${datadir}/applications \
>> 	       ${datadir}/pixmaps \
>> 	       ${datadir}/matchbox-keyboard"
> 
> 
> Thanks,
> 
> Paul
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Menzel]

[-- Attachment #1: Type: text/plain, Size: 2520 bytes --]

Am Donnerstag, den 10.11.2011, 21:17 -0600 schrieb David Thomas:
> On Nov 10, 2011, at 5:04 PM, Paul Menzel wrote:
> 
> > Am Donnerstag, den 10.11.2011, 16:11 -0600 schrieb David Thomas:
> >> I have tried every possible way, 8 hours so far, to get this file to
> >> process these patches. I got the patches, I have set up local
> >> repositories, ad nasium and same response, unable to fetch from any
> >> source.
> >> 
> >> I have tired every combination, I have tried every possible link, url,
> >> 
> >> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
> >> 
> >> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen-fontsize.patch;patch=1
> >> 
> >> and on and on. Every single project I have seen references the same
> >> 
> >> 
> >> SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http \
> >> 
> >> I am at the point of hurling this machine out a window. How could this
> >> be so cryptic and difficult?
> >> 
> >> Does anyone have a idea?
> >> 
> >> DESCRIPTION = "Matchbox virtual keyboard for X11"
> >> LICENSE = "GPL"
> >> DEPENDS = "libfakekey expat libxft"
> >> RCONFLICTS = matchbox-keyboard-inputmethod
> >> RPROVIDES_${PN} = matchbox-keyboard-inputmethod
> >> SECTION = "x11"
> >> PV = "0.0+svnr${SRCPV}"
> >> PR ="r7"
> >> 
> >> SRC_URI = "https://git.gitorious.org/cm-t3530/cm-t3530.git;protocol=git \
> >>           file://smallscreen-fontsize.patch;patch=1 \
> >>           file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1\
> >>           file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1 \
> >>           file://4-Add-rendering-debug-logging.patch;patch=1 \
> >>           file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1 \
> >>           file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1 \
> >>          "
> > 
> > Where do you have these files stored?
> 
>      $OEBASE/sources or /home/twoods/sources

You have to put them in the recipe folder under `files`, which is
deprecated, or cm-t3530-… like here.

        recipes/vdr$ ls -r
        vdr.inc
        vdr_1.7.16.bb
        
        vdr-1.7.16:
        0003-uclibc-Add-lintl-to-LIBS.patch  0001-Makefile-Pass-LDFLAGS.patch
        0002-tools.h-include-stdarg.h.patch

This is even in the manual I think and you have plenty of examples in
the repository already.

[…]


Thanks,

Paul

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 205 bytes --]

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Dave Thomas]

Thanks, I am new to oe and this is not entirely intuitive to me yet... I will try this.

Dave Thomas
MicroBee Systems, Inc
1429 Weatherly Road, Suite G
Huntsville, AL 35803
256-489-6671

From my iPad

On Nov 11, 2011, at 1:30 AM, Paul Menzel <paulepanter@users.sourceforge.net> wrote:

> Am Donnerstag, den 10.11.2011, 21:17 -0600 schrieb David Thomas:
>> On Nov 10, 2011, at 5:04 PM, Paul Menzel wrote:
>> 
>>> Am Donnerstag, den 10.11.2011, 16:11 -0600 schrieb David Thomas:
>>>> I have tried every possible way, 8 hours so far, to get this file to
>>>> process these patches. I got the patches, I have set up local
>>>> repositories, ad nasium and same response, unable to fetch from any
>>>> source.
>>>> 
>>>> I have tired every combination, I have tried every possible link, url,
>>>> 
>>>> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
>>>> 
>>>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen-fontsize.patch;patch=1
>>>> 
>>>> and on and on. Every single project I have seen references the same
>>>> 
>>>> 
>>>> SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http \
>>>> 
>>>> I am at the point of hurling this machine out a window. How could this
>>>> be so cryptic and difficult?
>>>> 
>>>> Does anyone have a idea?
>>>> 
>>>> DESCRIPTION = "Matchbox virtual keyboard for X11"
>>>> LICENSE = "GPL"
>>>> DEPENDS = "libfakekey expat libxft"
>>>> RCONFLICTS = matchbox-keyboard-inputmethod
>>>> RPROVIDES_${PN} = matchbox-keyboard-inputmethod
>>>> SECTION = "x11"
>>>> PV = "0.0+svnr${SRCPV}"
>>>> PR ="r7"
>>>> 
>>>> SRC_URI = "https://git.gitorious.org/cm-t3530/cm-t3530.git;protocol=git \
>>>>          file://smallscreen-fontsize.patch;patch=1 \
>>>>          file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1\
>>>>          file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1 \
>>>>          file://4-Add-rendering-debug-logging.patch;patch=1 \
>>>>          file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1 \
>>>>          file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1 \
>>>>         "
>>> 
>>> Where do you have these files stored?
>> 
>>     $OEBASE/sources or /home/twoods/sources
> 
> You have to put them in the recipe folder under `files`, which is
> deprecated, or cm-t3530-… like here.
> 
>        recipes/vdr$ ls -r
>        vdr.inc
>        vdr_1.7.16.bb
> 
>        vdr-1.7.16:
>        0003-uclibc-Add-lintl-to-LIBS.patch  0001-Makefile-Pass-LDFLAGS.patch
>        0002-tools.h-include-stdarg.h.patch
> 
> This is even in the manual I think and you have plenty of examples in
> the repository already.
> 
> […]
> 
> 
> Thanks,
> 
> Paul
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

Well I checked this and the files where in this location... Still no dice. The manual states it first searches to see if they exist then downloads. I see the opposite, it fails to contact the server and then fails.



~/openembedded/recipes/matchbox-keyboard$ ls

files                                 matchbox-keyboard_svn.bb  mboxkbd-layouts-gui_git.bb
matchbox-keyboard-inputmethod_svn.bb  mboxkbd-layouts-gui
twoods@EVA-DEV:~/openembedded/recipes/matchbox-keyboard$ cd files

twoods@EVA-DEV:~/openembedded/recipes/matchbox-keyboard/files$ ls

2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch
3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch
4-Add-rendering-debug-logging.patch
5-Add-support-for-loading-multiple-independent-layouts.patch
6-Add-layout-switch-key-to-all-layouts.patch
80matchboxkeyboard
fic-gta01-font-size.patch
matchbox-keyboard-applet.patch
matchbox-keyboard-hide-delay.patch
smallscreen-fontsize.patch






On Nov 11, 2011, at 1:30 AM, Paul Menzel wrote:

> Am Donnerstag, den 10.11.2011, 21:17 -0600 schrieb David Thomas:
>> On Nov 10, 2011, at 5:04 PM, Paul Menzel wrote:
>> 
>>> Am Donnerstag, den 10.11.2011, 16:11 -0600 schrieb David Thomas:
>>>> I have tried every possible way, 8 hours so far, to get this file to
>>>> process these patches. I got the patches, I have set up local
>>>> repositories, ad nasium and same response, unable to fetch from any
>>>> source.
>>>> 
>>>> I have tired every combination, I have tried every possible link, url,
>>>> 
>>>> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
>>>> 
>>>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen-fontsize.patch;patch=1
>>>> 
>>>> and on and on. Every single project I have seen references the same
>>>> 
>>>> 
>>>> SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http \
>>>> 
>>>> I am at the point of hurling this machine out a window. How could this
>>>> be so cryptic and difficult?
>>>> 
>>>> Does anyone have a idea?
>>>> 
>>>> DESCRIPTION = "Matchbox virtual keyboard for X11"
>>>> LICENSE = "GPL"
>>>> DEPENDS = "libfakekey expat libxft"
>>>> RCONFLICTS = matchbox-keyboard-inputmethod
>>>> RPROVIDES_${PN} = matchbox-keyboard-inputmethod
>>>> SECTION = "x11"
>>>> PV = "0.0+svnr${SRCPV}"
>>>> PR ="r7"
>>>> 
>>>> SRC_URI = "https://git.gitorious.org/cm-t3530/cm-t3530.git;protocol=git \
>>>>          file://smallscreen-fontsize.patch;patch=1 \
>>>>          file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1\
>>>>          file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1 \
>>>>          file://4-Add-rendering-debug-logging.patch;patch=1 \
>>>>          file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1 \
>>>>          file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1 \
>>>>         "
>>> 
>>> Where do you have these files stored?
>> 
>>     $OEBASE/sources or /home/twoods/sources
> 
> You have to put them in the recipe folder under `files`, which is
> deprecated, or cm-t3530-… like here.
> 
>        recipes/vdr$ ls -r
>        vdr.inc
>        vdr_1.7.16.bb
> 
>        vdr-1.7.16:
>        0003-uclibc-Add-lintl-to-LIBS.patch  0001-Makefile-Pass-LDFLAGS.patch
>        0002-tools.h-include-stdarg.h.patch
> 
> This is even in the manual I think and you have plenty of examples in
> the repository already.
> 
> […]
> 
> 
> Thanks,
> 
> Paul
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Friday 11 November 2011 06:11:14 David Thomas wrote:
> Well I checked this and the files where in this location... Still no dice.
> The manual states it first searches to see if they exist then downloads. I
> see the opposite, it fails to contact the server and then fails.

I don't think this is to do with those files (they are in the files subdir as 
you point out, and they will be found there via FILESPATH; this is automatic). 
If it's contacting the server and failing, it's the URI pointing to that 
server or some other problem relating to that operation. You're not behind 
some kind of firewall that blocks the git protocol are you?

Also, from one of your earlier emails:
> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"

I don't think this is what you want. Just use file://<full path> if you want to 
point it to a local location. But I'm not sure that's what you really want 
here either.

> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen
> -fontsize.patch;patch=1

That won't work - you have no space between the first URI and the next. Fix 
that, and assuming your network allows access to remote git repos, that should 
work.

You can double check what SRC_URI bitbake is going to use by running this:

bitbake -e matchbox-keyboard | grep ^SRC_URI

Could you also remind me what DISTRO you are using?

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

Returning the recipe to the original

EVA-DEV:~/openembedded/recipes/matchbox-keyboard$ bitbake -e
matchbox-keyboard | grep ^SRC_URI
SRC_URI="svn://svn.o-hand.com/repos/matchbox/trunk;module=matchbox-keyboard;proto=http
           file://smallscreen-fontsize.patch;patch=1
file://2-Add-new-modifier--layout--Used-to-cycle-thru-all-available-layouts.patch;patch=1
           file://3-Changes-to-improve-layout-rendering--especially-after-adding-support-for.patch;patch=1
           file://4-Add-rendering-debug-logging.patch;patch=1
  file://5-Add-support-for-loading-multiple-independent-layouts.patch;patch=1
           file://6-Add-layout-switch-key-to-all-layouts.patch;patch=1"



svn: OPTIONS of
'http://svn.o-hand.com/repos/matchbox/trunk/matchbox-keyboard': could
not connect to server (http://svn.o-hand.com)
NOTE: package matchbox-keyboard-0.0+svnr1910-r7: task Fetch failed:
Unable to fetch URL
svn://svn.o-hand.com/repos/matchbox/trunk;module=matchbox-keyboard;proto=http
from any source.: Failed
ERROR: Function 'Fetch failed: Unable to fetch URL
svn://svn.o-hand.com/repos/matchbox/trunk;module=matchbox-keyboard;proto=http
from any source.' failed
ERROR: Task 5758
(/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb,
do_fetch) failed with exit code '1'
ERROR: '/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb'
failed


I am building for the COMPULAB T-CM3530 using the kernel they post online.
The build platform is Ubuntu 10 LTS



On Fri, Nov 11, 2011 at 7:05 AM, Paul Eggleton
<paul.eggleton@linux.intel.com> wrote:
> On Friday 11 November 2011 06:11:14 David Thomas wrote:
>> Well I checked this and the files where in this location... Still no dice.
>> The manual states it first searches to see if they exist then downloads. I
>> see the opposite, it fails to contact the server and then fails.
>
> I don't think this is to do with those files (they are in the files subdir as
> you point out, and they will be found there via FILESPATH; this is automatic).
> If it's contacting the server and failing, it's the URI pointing to that
> server or some other problem relating to that operation. You're not behind
> some kind of firewall that blocks the git protocol are you?
>
> Also, from one of your earlier emails:
>> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
>
> I don't think this is what you want. Just use file://<full path> if you want to
> point it to a local location. But I'm not sure that's what you really want
> here either.
>
>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen
>> -fontsize.patch;patch=1
>
> That won't work - you have no space between the first URI and the next. Fix
> that, and assuming your network allows access to remote git repos, that should
> work.
>
> You can double check what SRC_URI bitbake is going to use by running this:
>
> bitbake -e matchbox-keyboard | grep ^SRC_URI
>
> Could you also remind me what DISTRO you are using?
>
> Cheers,
> Paul
>
> --
>
> Paul Eggleton
> Intel Open Source Technology Centre
>



-- 
Dave Thomas
MicroBee Systems, Inc
1429 Weatherly Road, Suite G
Huntsville, AL 35803-1187
256-489-6671 (Voice)
256-426-2431 (Mobile)
256-489-6673 (FAX)
www.microbee-systems.com
"Innovative Solutions for an Embedded World"

This message is intended for the sole use of the addressee, and may
contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the addressee you are
hereby notified that you may not use, copy, disclose, or distribute to
anyone the message or any information contained in the message. If you
have received this message in error, please immediately advise the
sender by reply email and delete this message.

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Friday 11 November 2011 08:51:15 you wrote:
> Returning the recipe to the original

Sorry if it wasn't clear but the matchbox svn repositories are gone and won't 
be coming back - they have been replaced by git repositories on 
yoctoproject.org; so you do need to at least correct that assuming you aren't 
using any mirrors (and it sounds like you aren't - I verified this morning that 
Angstrom has matchbox-keyboard in its source mirror).

> I am building for the COMPULAB T-CM3530 using the kernel they post online.
> The build platform is Ubuntu 10 LTS

What I was after was what DISTRO is set to in your conf/local.conf...?

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

I think it is choking on this:


PV = "0.0+svnr${SRCPV}"
PR ="r7"

bb.mkdirhier(codir)

 fatal: Not a valid object name 1910
NOTE: package matchbox-keyboard-0.0+svnr0+1910-r7: task Fetch failed:
Unable to fetch URL
git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
source.: Failed
ERROR: Function 'Fetch failed: Unable to fetch URL
git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
source.' failed


Tinkering a tad by commenting out PV = "0.0+svnr${SRCPV}"  makes me
think it is trying to point to a specific release in the repository,
something similar.

bb.mkdirhier(codir)

 fatal: Not a valid object name 1910
NOTE: package matchbox-keyboard-svn-r7: task Fetch failed: Unable to
fetch URL git://git.yoctoproject.org/matchbox-keyboard;protocol=git
from any source.: Failed
ERROR: Function 'Fetch failed: Unable to fetch URL
git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
source.' failed
ERROR: Task 5758
(/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb,
do_fetch) failed with exit code '1'
ERROR: '/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb'
failed






On Fri, Nov 11, 2011 at 7:05 AM, Paul Eggleton
<paul.eggleton@linux.intel.com> wrote:
> On Friday 11 November 2011 06:11:14 David Thomas wrote:
>> Well I checked this and the files where in this location... Still no dice.
>> The manual states it first searches to see if they exist then downloads. I
>> see the opposite, it fails to contact the server and then fails.
>
> I don't think this is to do with those files (they are in the files subdir as
> you point out, and they will be found there via FILESPATH; this is automatic).
> If it's contacting the server and failing, it's the URI pointing to that
> server or some other problem relating to that operation. You're not behind
> some kind of firewall that blocks the git protocol are you?
>
> Also, from one of your earlier emails:
>> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
>
> I don't think this is what you want. Just use file://<full path> if you want to
> point it to a local location. But I'm not sure that's what you really want
> here either.
>
>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen
>> -fontsize.patch;patch=1
>
> That won't work - you have no space between the first URI and the next. Fix
> that, and assuming your network allows access to remote git repos, that should
> work.
>
> You can double check what SRC_URI bitbake is going to use by running this:
>
> bitbake -e matchbox-keyboard | grep ^SRC_URI
>
> Could you also remind me what DISTRO you are using?
>
> Cheers,
> Paul
>
> --
>
> Paul Eggleton
> Intel Open Source Technology Centre
>



-- 
Dave Thomas
MicroBee Systems, Inc
1429 Weatherly Road, Suite G
Huntsville, AL 35803-1187
256-489-6671 (Voice)
256-426-2431 (Mobile)
256-489-6673 (FAX)
www.microbee-systems.com
"Innovative Solutions for an Embedded World"

This message is intended for the sole use of the addressee, and may
contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the addressee you are
hereby notified that you may not use, copy, disclose, or distribute to
anyone the message or any information contained in the message. If you
have received this message in error, please immediately advise the
sender by reply email and delete this message.

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Friday 11 November 2011 09:20:18 you wrote:
> Sorry, new to this system. We mostly design hardware and I go in and
> out of Linux development periodically and it is difficult to keep
> current for this reason.

No problem. I know you've been very patient with the frustrations you have, if 
you'll just bear with us I'm sure we can sort it out.

> DISTRO = "angstrom-2008.1"

OK. So it ought to have the approprate file in the mirror. What version of 
bitbake are you using? Also, could you run the following:

bitbake -e matchbox-native | grep ^PREMIRRORS

> Will I need to search any bb files using the dead SRC_URI and replace
> them with yoctoproject.org?

That's one way of fixing it, yes.

BTW I would suggest if you are starting a new project and you expect to keep 
it around for a while you should consider using something based on top of 
OpenEmbedded-Core, such as the Yocto Project or a newer version of Angstrom. 
That way issues like these (broken downloads) get taken care of, since OE-core 
is maintained.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Martin Jansa]

[-- Attachment #1: Type: text/plain, Size: 4304 bytes --]

On Fri, Nov 11, 2011 at 09:52:35AM -0600, David Thomas wrote:
> I think it is choking on this:
> 
> 
> PV = "0.0+svnr${SRCPV}"
> PR ="r7"
> 
> bb.mkdirhier(codir)
> 
>  fatal: Not a valid object name 1910
> NOTE: package matchbox-keyboard-0.0+svnr0+1910-r7: task Fetch failed:
> Unable to fetch URL
> git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
> source.: Failed
> ERROR: Function 'Fetch failed: Unable to fetch URL
> git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
> source.' failed
> 
> 
> Tinkering a tad by commenting out PV = "0.0+svnr${SRCPV}"  makes me
> think it is trying to point to a specific release in the repository,
> something similar.
> 
> bb.mkdirhier(codir)
> 
>  fatal: Not a valid object name 1910
> NOTE: package matchbox-keyboard-svn-r7: task Fetch failed: Unable to
> fetch URL git://git.yoctoproject.org/matchbox-keyboard;protocol=git
> from any source.: Failed
> ERROR: Function 'Fetch failed: Unable to fetch URL
> git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
> source.' failed
> ERROR: Task 5758
> (/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb,
> do_fetch) failed with exit code '1'
> ERROR: '/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb'
> failed

This looks like you didn't copy SRCREV param from git recipe in oe-core.

So it's trying to checkout git hash 1910 which doesn't exist, because
it's subversion revision from old recipe and not git hash.

> 
> 
> 
> 
> 
> 
> On Fri, Nov 11, 2011 at 7:05 AM, Paul Eggleton
> <paul.eggleton@linux.intel.com> wrote:
> > On Friday 11 November 2011 06:11:14 David Thomas wrote:
> >> Well I checked this and the files where in this location... Still no dice.
> >> The manual states it first searches to see if they exist then downloads. I
> >> see the opposite, it fails to contact the server and then fails.
> >
> > I don't think this is to do with those files (they are in the files subdir as
> > you point out, and they will be found there via FILESPATH; this is automatic).
> > If it's contacting the server and failing, it's the URI pointing to that
> > server or some other problem relating to that operation. You're not behind
> > some kind of firewall that blocks the git protocol are you?
> >
> > Also, from one of your earlier emails:
> >> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
> >
> > I don't think this is what you want. Just use file://<full path> if you want to
> > point it to a local location. But I'm not sure that's what you really want
> > here either.
> >
> >> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen
> >> -fontsize.patch;patch=1
> >
> > That won't work - you have no space between the first URI and the next. Fix
> > that, and assuming your network allows access to remote git repos, that should
> > work.
> >
> > You can double check what SRC_URI bitbake is going to use by running this:
> >
> > bitbake -e matchbox-keyboard | grep ^SRC_URI
> >
> > Could you also remind me what DISTRO you are using?
> >
> > Cheers,
> > Paul
> >
> > --
> >
> > Paul Eggleton
> > Intel Open Source Technology Centre
> >
> 
> 
> 
> -- 
> Dave Thomas
> MicroBee Systems, Inc
> 1429 Weatherly Road, Suite G
> Huntsville, AL 35803-1187
> 256-489-6671 (Voice)
> 256-426-2431 (Mobile)
> 256-489-6673 (FAX)
> www.microbee-systems.com
> "Innovative Solutions for an Embedded World"
> 
> This message is intended for the sole use of the addressee, and may
> contain information that is privileged, confidential and exempt from
> disclosure under applicable law. If you are not the addressee you are
> hereby notified that you may not use, copy, disclose, or distribute to
> anyone the message or any information contained in the message. If you
> have received this message in error, please immediately advise the
> sender by reply email and delete this message.
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

I had surmised that this was the problem a few min ago... I am looking into it..

On Fri, Nov 11, 2011 at 10:03 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
> On Fri, Nov 11, 2011 at 09:52:35AM -0600, David Thomas wrote:
>> I think it is choking on this:
>>
>>
>> PV = "0.0+svnr${SRCPV}"
>> PR ="r7"
>>
>> bb.mkdirhier(codir)
>>
>>  fatal: Not a valid object name 1910
>> NOTE: package matchbox-keyboard-0.0+svnr0+1910-r7: task Fetch failed:
>> Unable to fetch URL
>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
>> source.: Failed
>> ERROR: Function 'Fetch failed: Unable to fetch URL
>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
>> source.' failed
>>
>>
>> Tinkering a tad by commenting out PV = "0.0+svnr${SRCPV}"  makes me
>> think it is trying to point to a specific release in the repository,
>> something similar.
>>
>> bb.mkdirhier(codir)
>>
>>  fatal: Not a valid object name 1910
>> NOTE: package matchbox-keyboard-svn-r7: task Fetch failed: Unable to
>> fetch URL git://git.yoctoproject.org/matchbox-keyboard;protocol=git
>> from any source.: Failed
>> ERROR: Function 'Fetch failed: Unable to fetch URL
>> git://git.yoctoproject.org/matchbox-keyboard;protocol=git from any
>> source.' failed
>> ERROR: Task 5758
>> (/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb,
>> do_fetch) failed with exit code '1'
>> ERROR: '/home/twoods/openembedded/recipes/matchbox-keyboard/matchbox-keyboard_svn.bb'
>> failed
>
> This looks like you didn't copy SRCREV param from git recipe in oe-core.
>
> So it's trying to checkout git hash 1910 which doesn't exist, because
> it's subversion revision from old recipe and not git hash.
>
>>
>>
>>
>>
>>
>>
>> On Fri, Nov 11, 2011 at 7:05 AM, Paul Eggleton
>> <paul.eggleton@linux.intel.com> wrote:
>> > On Friday 11 November 2011 06:11:14 David Thomas wrote:
>> >> Well I checked this and the files where in this location... Still no dice.
>> >> The manual states it first searches to see if they exist then downloads. I
>> >> see the opposite, it fails to contact the server and then fails.
>> >
>> > I don't think this is to do with those files (they are in the files subdir as
>> > you point out, and they will be found there via FILESPATH; this is automatic).
>> > If it's contacting the server and failing, it's the URI pointing to that
>> > server or some other problem relating to that operation. You're not behind
>> > some kind of firewall that blocks the git protocol are you?
>> >
>> > Also, from one of your earlier emails:
>> >> SRC_URI = "git:///home/twoods/local;protocol=file;branch=master"
>> >
>> > I don't think this is what you want. Just use file://<full path> if you want to
>> > point it to a local location. But I'm not sure that's what you really want
>> > here either.
>> >
>> >> git://git.yoctoproject.org/matchbox-keyboard;protocol=git;file://smallscreen
>> >> -fontsize.patch;patch=1
>> >
>> > That won't work - you have no space between the first URI and the next. Fix
>> > that, and assuming your network allows access to remote git repos, that should
>> > work.
>> >
>> > You can double check what SRC_URI bitbake is going to use by running this:
>> >
>> > bitbake -e matchbox-keyboard | grep ^SRC_URI
>> >
>> > Could you also remind me what DISTRO you are using?
>> >
>> > Cheers,
>> > Paul
>> >
>> > --
>> >
>> > Paul Eggleton
>> > Intel Open Source Technology Centre
>> >
>>
>>
>>
>> --
>> Dave Thomas
>> MicroBee Systems, Inc
>> 1429 Weatherly Road, Suite G
>> Huntsville, AL 35803-1187
>> 256-489-6671 (Voice)
>> 256-426-2431 (Mobile)
>> 256-489-6673 (FAX)
>> www.microbee-systems.com
>> "Innovative Solutions for an Embedded World"
>>
>> This message is intended for the sole use of the addressee, and may
>> contain information that is privileged, confidential and exempt from
>> disclosure under applicable law. If you are not the addressee you are
>> hereby notified that you may not use, copy, disclose, or distribute to
>> anyone the message or any information contained in the message. If you
>> have received this message in error, please immediately advise the
>> sender by reply email and delete this message.
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
> --
> Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
>



-- 
Dave Thomas
MicroBee Systems, Inc
1429 Weatherly Road, Suite G
Huntsville, AL 35803-1187
256-489-6671 (Voice)
256-426-2431 (Mobile)
256-489-6673 (FAX)
www.microbee-systems.com
"Innovative Solutions for an Embedded World"

This message is intended for the sole use of the addressee, and may
contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the addressee you are
hereby notified that you may not use, copy, disclose, or distribute to
anyone the message or any information contained in the message. If you
have received this message in error, please immediately advise the
sender by reply email and delete this message.

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Friday 11 November 2011 10:04:11 you wrote:
>  bitbake -e matchbox-native | grep ^PREMIRRORS
> 
> Returned nothing...

Are you using DISTRO = "angstrom-2008.1" with the master branch of OE by any 
chance?

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Friday 11 November 2011 10:23:26 you wrote:
> * cm-t35-dev

Er, so this is a local branch, not sure where that would have been branched 
from...

Let's roll this back. Do you have a conf/distro/angstrom-2008.1.conf file in 
your OE tree?

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Friday 11 November 2011 10:34:56 you wrote:
> http://www.compulab.co.il/workspace/mediawiki/index.php5/CM-T3530:_Linux:_Bu
> ilding_images
> 
> Bad Idea?

Well, that's a positively ancient revision of OE (from 2009) and having to put 
a set of patches on top of it is rather ugly. It's not clear to me why they 
couldn't just point you to a revision with the appropriate support already in 
it if they wanted to pick a stable point.

It'll be dependent on what the patches do, but I think you'll probably be much 
better off with the OE 2011.03-maintenance branch or master (in the latter case 
you'll need to use DISTRO = "angstrom-2010.x" since there is no 2008.1, that's 
why I was asking previously) - both of which have a cm-t35 machine, but I 
can't speak to how good the support for it will be.
 
Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[Paul Eggleton]

On Friday 11 November 2011 11:06:29 you wrote:
> Dumb question. Can you point me to this distro with cm-t35 machines
> such that I can get clone? I looked at the Angstrom site.

Well, the Angstrom-prescribed method is to use the setup scripts - it's 
documented in the "Developers" section of the website. You don't have to use 
this method however - just switch over to the master / 2011.3-maintenance 
branch of OE and you should be able to run your build.
 
> If I have Angstrom build me a kernel does it provide me with the
> local.conf, etc? 

If you use the scripts it does, yes. Otherwise you should be able to keep your 
current configuration.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre

Re: SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk

[David Thomas]

I got the Angstrom scripts working with a cm-t35.conf file I found on the net. While it remains to bee seen if it runs and functions the same as the current Compulab build it is a big step forward. I am going to do a writeup to Compulab to change their Wiki as it was a painful dead end path... Wish I had tried this approach sooner but I had reservations about the CM-T35 having hardware specific differences...

If this works as I now surmize it is a pretty interesting way to build kernels for a number of platforms.  

Thanks for everything

Dave

On Nov 11, 2011, at 11:28 AM, Paul Eggleton wrote:

> On Friday 11 November 2011 11:06:29 you wrote:
>> Dumb question. Can you point me to this distro with cm-t35 machines
>> such that I can get clone? I looked at the Angstrom site.
> 
> Well, the Angstrom-prescribed method is to use the setup scripts - it's 
> documented in the "Developers" section of the website. You don't have to use 
> this method however - just switch over to the master / 2011.3-maintenance 
> branch of OE and you should be able to run your build.
> 
>> If I have Angstrom build me a kernel does it provide me with the
>> local.conf, etc? 
> 
> If you use the scripts it does, yes. Otherwise you should be able to keep your 
> current configuration.
> 
> Cheers,
> Paul
> 
> -- 
> 
> Paul Eggleton
> Intel Open Source Technology Centre