* [PATCH v3 1/2] dt-bindings: Add ch7322 media i2c device
2020-05-29 3:00 [PATCH v3 0/2] CH7322 CEC controller driver Jeff Chase
@ 2020-05-29 3:00 ` Jeff Chase
2020-05-29 21:02 ` Rob Herring
2020-05-29 3:00 ` [PATCH v3 2/2] media: cec: i2c: ch7322: Add ch7322 CEC controller driver Jeff Chase
1 sibling, 1 reply; 8+ messages in thread
From: Jeff Chase @ 2020-05-29 3:00 UTC (permalink / raw)
To: linux-media; +Cc: mchehab, hverkuil-cisco, robh+dt, devicetree, Jeff Chase
The ch7322 is a Chrontel CEC controller.
Signed-off-by: Jeff Chase <jnchase@google.com>
---
.../bindings/media/i2c/chrontel,ch7322.yaml | 65 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 7 ++
3 files changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
new file mode 100644
index 000000000000..d5706e08164c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Chrontel HDMI-CEC Controller
+
+maintainers:
+ - Jeff Chase <jnchase@google.com>
+
+description: |-
+ The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
+ programmable through I2C and drives a single CEC line.
+
+properties:
+ compatible:
+ const: chrontel,ch7322
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description: |-
+ Reference to the GPIO connected to the RESET pin, if any. This
+ pin is active-low.
+
+ standby-gpios:
+ description: |-
+ Reference to the GPIO connected to the OE pin, if any. When low
+ the device will respond to power status requests with "standby"
+ if in auto mode.
+
+ # see ../cec.txt
+ hdmi-phandle:
+ description: phandle to the HDMI controller
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ch7322@75 {
+ compatible = "chrontel,ch7322";
+ reg = <0x75>;
+ interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+ standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ hdmi-phandle = <&hdmi>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index d3891386d671..7794ffccd325 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -187,6 +187,8 @@ patternProperties:
description: ChipOne
"^chipspark,.*":
description: ChipSPARK
+ "^chrontel,.*":
+ description: Chrontel, Inc.
"^chrp,.*":
description: Common Hardware Reference Platform
"^chunghwa,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index d633a131dcd7..34c6d30e61e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4047,6 +4047,13 @@ F: drivers/power/supply/cros_usbpd-charger.c
N: cros_ec
N: cros-ec
+CHRONTEL CH7322 CEC DRIVER
+M: Jeff Chase <jnchase@google.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/chontel,ch7322.yaml
+
CIRRUS LOGIC AUDIO CODEC DRIVERS
M: James Schulman <james.schulman@cirrus.com>
M: David Rhodes <david.rhodes@cirrus.com>
--
2.27.0.rc0.183.gde8f92d652-goog
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v3 2/2] media: cec: i2c: ch7322: Add ch7322 CEC controller driver
2020-05-29 3:00 [PATCH v3 0/2] CH7322 CEC controller driver Jeff Chase
2020-05-29 3:00 ` [PATCH v3 1/2] dt-bindings: Add ch7322 media i2c device Jeff Chase
@ 2020-05-29 3:00 ` Jeff Chase
[not found] ` <CALTkaQ2OR+bc2QGeucA5aP3SiM5HLnx5=DoZQ51E_1d99Hb5Uw@mail.gmail.com>
1 sibling, 1 reply; 8+ messages in thread
From: Jeff Chase @ 2020-05-29 3:00 UTC (permalink / raw)
To: linux-media; +Cc: mchehab, hverkuil-cisco, robh+dt, devicetree, Jeff Chase
Add a CEC device driver for the Chrontel ch7322 CEC conroller.
This is an I2C device capable of sending and receiving CEC messages.
Signed-off-by: Jeff Chase <jnchase@google.com>
---
MAINTAINERS | 1 +
drivers/media/cec/Kconfig | 1 +
drivers/media/cec/Makefile | 2 +-
drivers/media/cec/i2c/Kconfig | 14 +
drivers/media/cec/i2c/Makefile | 5 +
drivers/media/cec/i2c/ch7322.c | 523 +++++++++++++++++++++++++++++++++
6 files changed, 545 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/cec/i2c/Kconfig
create mode 100644 drivers/media/cec/i2c/Makefile
create mode 100644 drivers/media/cec/i2c/ch7322.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 34c6d30e61e5..43e876395686 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4053,6 +4053,7 @@ L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/chontel,ch7322.yaml
+F: drivers/media/cec/i2c/ch7322.c
CIRRUS LOGIC AUDIO CODEC DRIVERS
M: James Schulman <james.schulman@cirrus.com>
diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig
index eea74b7cfa8c..3e934aa239ab 100644
--- a/drivers/media/cec/Kconfig
+++ b/drivers/media/cec/Kconfig
@@ -33,6 +33,7 @@ menuconfig MEDIA_CEC_SUPPORT
adapter that supports HDMI CEC.
if MEDIA_CEC_SUPPORT
+source "drivers/media/cec/i2c/Kconfig"
source "drivers/media/cec/platform/Kconfig"
source "drivers/media/cec/usb/Kconfig"
endif
diff --git a/drivers/media/cec/Makefile b/drivers/media/cec/Makefile
index 74e80e1b3571..23539339bc81 100644
--- a/drivers/media/cec/Makefile
+++ b/drivers/media/cec/Makefile
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
-obj-y += core/ platform/ usb/
+obj-y += core/ i2c/ platform/ usb/
diff --git a/drivers/media/cec/i2c/Kconfig b/drivers/media/cec/i2c/Kconfig
new file mode 100644
index 000000000000..e445ca2110b3
--- /dev/null
+++ b/drivers/media/cec/i2c/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# I2C drivers
+
+config CEC_CH7322
+ tristate "Chrontel CH7322 CEC controller"
+ select I2C
+ select REGMAP_I2C
+ select CEC_CORE
+ help
+ This is a driver for the Chrontel CH7322 CEC controller. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
diff --git a/drivers/media/cec/i2c/Makefile b/drivers/media/cec/i2c/Makefile
new file mode 100644
index 000000000000..d7496dfd0fa4
--- /dev/null
+++ b/drivers/media/cec/i2c/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the CEC I2C device drivers.
+#
+obj-$(CONFIG_CEC_CH7322) += ch7322.o
diff --git a/drivers/media/cec/i2c/ch7322.c b/drivers/media/cec/i2c/ch7322.c
new file mode 100644
index 000000000000..dd54df61a522
--- /dev/null
+++ b/drivers/media/cec/i2c/ch7322.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Chrontel CH7322 CEC Controller
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/*
+ * Notes
+ *
+ * - This device powers on in Auto Mode which has limited functionality. This
+ * driver disables Auto Mode when it attaches.
+ *
+ */
+
+#include <linux/cec.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <media/cec.h>
+
+#define CH7322_WRITE 0x00
+#define CH7322_WRITE_MSENT 0x80
+#define CH7322_WRITE_BOK 0x40
+#define CH7322_WRITE_NMASK 0x0f
+
+/* Write buffer is 0x01-0x10 */
+#define CH7322_WRBUF 0x01
+#define CH7322_WRBUF_LEN 0x10
+
+#define CH7322_READ 0x40
+#define CH7322_READ_NRDT 0x80
+#define CH7322_READ_MSENT 0x20
+#define CH7322_READ_NMASK 0x0f
+
+/* Read buffer is 0x41-0x50 */
+#define CH7322_RDBUF 0x41
+#define CH7322_RDBUF_LEN 0x10
+
+#define CH7322_MODE 0x11
+#define CH7322_MODE_AUTO 0x78
+#define CH7322_MODE_SW 0xb5
+
+#define CH7322_RESET 0x12
+#define CH7322_RESET_RST 0x00
+
+#define CH7322_POWER 0x13
+#define CH7322_POWER_FPD 0x04
+
+#define CH7322_CFG0 0x17
+#define CH7322_CFG0_EOBEN 0x40
+#define CH7322_CFG0_PEOB 0x20
+#define CH7322_CFG0_CLRSPP 0x10
+#define CH7322_CFG0_FLOW 0x08
+
+#define CH7322_CFG1 0x1a
+#define CH7322_CFG1_STDBYO 0x04
+#define CH7322_CFG1_HPBP 0x02
+#define CH7322_CFG1_PIO 0x01
+
+#define CH7322_INTCTL 0x1b
+#define CH7322_INTCTL_INTPB 0x80
+#define CH7322_INTCTL_STDBY 0x40
+#define CH7322_INTCTL_HPDFALL 0x20
+#define CH7322_INTCTL_HPDRISE 0x10
+#define CH7322_INTCTL_RXMSG 0x08
+#define CH7322_INTCTL_TXMSG 0x04
+#define CH7322_INTCTL_NEWPHA 0x02
+#define CH7322_INTCTL_ERROR 0x01
+
+#define CH7322_DVCLKFNH 0x1d
+#define CH7322_DVCLKFNL 0x1e
+
+#define CH7322_CTL 0x31
+#define CH7322_CTL_FSTDBY 0x80
+#define CH7322_CTL_PLSEN 0x40
+#define CH7322_CTL_PLSPB 0x20
+#define CH7322_CTL_SPADL 0x10
+#define CH7322_CTL_HINIT 0x08
+#define CH7322_CTL_WPHYA 0x04
+#define CH7322_CTL_H1T 0x02
+#define CH7322_CTL_S1T 0x01
+
+#define CH7322_PAWH 0x32
+#define CH7322_PAWL 0x33
+
+#define CH7322_ADDLW 0x34
+#define CH7322_ADDLW_MASK 0xf0
+
+#define CH7322_ADDLR 0x3d
+#define CH7322_ADDLR_HPD 0x80
+#define CH7322_ADDLR_MASK 0x0f
+
+#define CH7322_INTDATA 0x3e
+#define CH7322_INTDATA_MODE 0x80
+#define CH7322_INTDATA_STDBY 0x40
+#define CH7322_INTDATA_HPDFALL 0x20
+#define CH7322_INTDATA_HPDRISE 0x10
+#define CH7322_INTDATA_RXMSG 0x08
+#define CH7322_INTDATA_TXMSG 0x04
+#define CH7322_INTDATA_NEWPHA 0x02
+#define CH7322_INTDATA_ERROR 0x01
+
+#define CH7322_EVENT 0x3F
+#define CH7322_EVENT_TXERR 0x80
+#define CH7322_EVENT_HRST 0x40
+#define CH7322_EVENT_HFST 0x20
+#define CH7322_EVENT_PHACHG 0x10
+#define CH7322_EVENT_ACTST 0x08
+#define CH7322_EVENT_PHARDY 0x04
+#define CH7322_EVENT_BSOK 0x02
+#define CH7322_EVENT_ERRADCF 0x01
+
+#define CH7322_DID 0x51
+#define CH7322_DID_CH7322 0x5b
+#define CH7322_DID_CH7323 0x5f
+
+#define CH7322_REVISIONID 0x52
+
+#define CH7322_PARH 0x53
+#define CH7322_PARL 0x54
+
+#define CH7322_IOCFG2 0x75
+#define CH7322_IOCFG_CIO 0x80
+#define CH7322_IOCFG_IOCFGMASK 0x78
+#define CH7322_IOCFG_AUDIO 0x04
+#define CH7322_IOCFG_SPAMST 0x02
+#define CH7322_IOCFG_SPAMSP 0x01
+
+#define CH7322_CTL3 0x7b
+#define CH7322_CTL3_SWENA 0x80
+#define CH7322_CTL3_FC_INIT 0x40
+#define CH7322_CTL3_SML_FL 0x20
+#define CH7322_CTL3_SM_RDST 0x10
+#define CH7322_CTL3_SPP_CIAH 0x08
+#define CH7322_CTL3_SPP_CIAL 0x04
+#define CH7322_CTL3_SPP_ACTH 0x02
+#define CH7322_CTL3_SPP_ACTL 0x01
+
+/* BOK status means NACK */
+#define CH7322_TX_FLAG_NACK BIT(0)
+/* Device will retry automatically */
+#define CH7322_TX_FLAG_RETRY BIT(1)
+
+struct ch7322 {
+ struct i2c_client *i2c;
+ struct regmap *regmap;
+ struct cec_adapter *cec;
+ struct mutex mutex; /* device access mutex */
+ u8 tx_flags;
+};
+
+static const struct regmap_config ch7322_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x7f,
+ .disable_locking = true,
+};
+
+static int ch7322_unmask_interrupt(struct ch7322 *ch7322)
+{
+ int ret;
+
+ mutex_lock(&ch7322->mutex);
+ ret = regmap_write(ch7322->regmap, CH7322_INTCTL, 0xff);
+ mutex_unlock(&ch7322->mutex);
+
+ return ret;
+}
+
+static int ch7322_mask_interrupt(struct ch7322 *ch7322)
+{
+ int ret;
+
+ mutex_lock(&ch7322->mutex);
+ ret = regmap_write(ch7322->regmap, CH7322_INTCTL, CH7322_INTCTL_INTPB);
+ mutex_unlock(&ch7322->mutex);
+
+ return ret;
+}
+
+static int ch7322_send_message(struct ch7322 *ch7322, const struct cec_msg *msg)
+{
+ unsigned int val;
+ unsigned int len = msg->len;
+ int ret;
+ int i;
+
+ WARN_ON(!mutex_is_locked(&ch7322->mutex));
+
+ if (len > CH7322_WRBUF_LEN || len < 1)
+ return -EINVAL;
+
+ ret = regmap_read(ch7322->regmap, CH7322_WRITE, &val);
+ if (ret)
+ return ret;
+
+ /* Buffer not ready */
+ if (!(val & CH7322_WRITE_MSENT))
+ return -EBUSY;
+
+ if (cec_msg_opcode(msg) == -1 &&
+ cec_msg_initiator(msg) == cec_msg_destination(msg)) {
+ ch7322->tx_flags = CH7322_TX_FLAG_NACK | CH7322_TX_FLAG_RETRY;
+ } else if (cec_msg_is_broadcast(msg)) {
+ ch7322->tx_flags = CH7322_TX_FLAG_NACK;
+ } else {
+ ch7322->tx_flags = CH7322_TX_FLAG_RETRY;
+ }
+
+ ret = regmap_write(ch7322->regmap, CH7322_WRITE, len - 1);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < len; i++) {
+ ret = regmap_write(ch7322->regmap,
+ CH7322_WRBUF + i, msg->msg[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ch7322_receive_message(struct ch7322 *ch7322, struct cec_msg *msg)
+{
+ unsigned int val;
+ int ret = 0;
+ int i;
+
+ WARN_ON(!mutex_is_locked(&ch7322->mutex));
+
+ ret = regmap_read(ch7322->regmap, CH7322_READ, &val);
+ if (ret)
+ return ret;
+
+ /* Message not ready */
+ if (!(val & CH7322_READ_NRDT))
+ return -EIO;
+
+ msg->len = (val & CH7322_READ_NMASK) + 1;
+
+ /* Read entire RDBUF to clear state */
+ for (i = 0; i < CH7322_RDBUF_LEN; i++) {
+ ret = regmap_read(ch7322->regmap, CH7322_RDBUF + i, &val);
+ if (ret)
+ return ret;
+ msg->msg[i] = (u8)val;
+ }
+
+ return 0;
+}
+
+static void ch7322_tx_done(struct ch7322 *ch7322)
+{
+ int ret;
+ unsigned int val;
+ u8 status, flags;
+
+ mutex_lock(&ch7322->mutex);
+ ret = regmap_read(ch7322->regmap, CH7322_WRITE, &val);
+ flags = ch7322->tx_flags;
+ mutex_unlock(&ch7322->mutex);
+
+ /*
+ * The device returns a one-bit OK status which usually means ACK but
+ * actually means NACK when sending a logical address query or a
+ * broadcast.
+ */
+ if (ret)
+ status = CEC_TX_STATUS_ERROR;
+ else if ((val & CH7322_WRITE_BOK) && (flags & CH7322_TX_FLAG_NACK))
+ status = CEC_TX_STATUS_NACK;
+ else if (val & CH7322_WRITE_BOK)
+ status = CEC_TX_STATUS_OK;
+ else if (flags & CH7322_TX_FLAG_NACK)
+ status = CEC_TX_STATUS_OK;
+ else
+ status = CEC_TX_STATUS_NACK;
+
+ if (status == CEC_TX_STATUS_NACK && (flags & CH7322_TX_FLAG_RETRY))
+ status |= CEC_TX_STATUS_MAX_RETRIES;
+
+ cec_transmit_attempt_done(ch7322->cec, status);
+}
+
+static void ch7322_rx_done(struct ch7322 *ch7322)
+{
+ struct cec_msg msg;
+ int ret;
+
+ mutex_lock(&ch7322->mutex);
+ ret = ch7322_receive_message(ch7322, &msg);
+ mutex_unlock(&ch7322->mutex);
+
+ if (ret)
+ dev_err(&ch7322->i2c->dev, "cec receive error: %d\n", ret);
+ else
+ cec_received_msg(ch7322->cec, &msg);
+}
+
+/*
+ * This device can either monitor the DDC lines to obtain the physical address
+ * or it can allow the host to program it. This driver lets the device obtain
+ * it.
+ */
+static void ch7322_phys_addr(struct ch7322 *ch7322)
+{
+ unsigned int pah, pal;
+ int ret = 0;
+
+ mutex_lock(&ch7322->mutex);
+ ret |= regmap_read(ch7322->regmap, CH7322_PARH, &pah);
+ ret |= regmap_read(ch7322->regmap, CH7322_PARL, &pal);
+ mutex_unlock(&ch7322->mutex);
+
+ if (ret)
+ dev_err(&ch7322->i2c->dev, "phys addr error\n");
+ else
+ cec_s_phys_addr(ch7322->cec, pal | (pah << 8), false);
+}
+
+static void ch7322_handle_events(struct ch7322 *ch7322)
+{
+ unsigned int data = 0;
+
+ mutex_lock(&ch7322->mutex);
+ regmap_read(ch7322->regmap, CH7322_INTDATA, &data);
+ regmap_write(ch7322->regmap, CH7322_INTDATA, data);
+ mutex_unlock(&ch7322->mutex);
+
+ if (data & CH7322_INTDATA_HPDFALL)
+ cec_phys_addr_invalidate(ch7322->cec);
+
+ if (data & CH7322_INTDATA_TXMSG)
+ ch7322_tx_done(ch7322);
+
+ if (data & CH7322_INTDATA_RXMSG)
+ ch7322_rx_done(ch7322);
+
+ if (data & CH7322_INTDATA_NEWPHA)
+ ch7322_phys_addr(ch7322);
+
+ if (data & CH7322_INTDATA_ERROR)
+ dev_dbg(&ch7322->i2c->dev, "unknown error\n");
+}
+
+static irqreturn_t ch7322_irq(int irq, void *dev)
+{
+ struct ch7322 *ch7322 = dev;
+
+ ch7322_handle_events(ch7322);
+
+ return IRQ_HANDLED;
+}
+
+static int ch7322_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+ struct ch7322 *ch7322 = cec_get_drvdata(adap);
+ int ret;
+
+ if (enable)
+ ret = ch7322_unmask_interrupt(ch7322);
+ else
+ ret = ch7322_mask_interrupt(ch7322);
+
+ return ret;
+}
+
+static int ch7322_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+ struct ch7322 *ch7322 = cec_get_drvdata(adap);
+ int ret;
+
+ mutex_lock(&ch7322->mutex);
+ ret = regmap_update_bits(ch7322->regmap, CH7322_ADDLW,
+ CH7322_ADDLW_MASK, log_addr << 4);
+ mutex_unlock(&ch7322->mutex);
+
+ return ret;
+}
+
+static int ch7322_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+ u32 signal_free_time, struct cec_msg *msg)
+{
+ struct ch7322 *ch7322 = cec_get_drvdata(adap);
+ int ret;
+
+ mutex_lock(&ch7322->mutex);
+ ret = ch7322_send_message(ch7322, msg);
+ mutex_unlock(&ch7322->mutex);
+
+ return ret;
+}
+
+static const struct cec_adap_ops ch7322_cec_adap_ops = {
+ .adap_enable = ch7322_cec_adap_enable,
+ .adap_log_addr = ch7322_cec_adap_log_addr,
+ .adap_transmit = ch7322_cec_adap_transmit,
+};
+
+static int ch7322_probe(struct i2c_client *client)
+{
+ struct ch7322 *ch7322;
+ int ret;
+ unsigned int val;
+
+ ch7322 = devm_kzalloc(&client->dev, sizeof(*ch7322), GFP_KERNEL);
+ if (!ch7322)
+ return -ENOMEM;
+
+ ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
+ if (IS_ERR(ch7322->regmap))
+ return PTR_ERR(ch7322->regmap);
+
+ ret = regmap_read(ch7322->regmap, CH7322_DID, &val);
+ if (ret)
+ return ret;
+
+ if (val != CH7322_DID_CH7322)
+ return -ENOTSUPP;
+
+ mutex_init(&ch7322->mutex);
+ ch7322->i2c = client;
+ ch7322->tx_flags = 0;
+
+ i2c_set_clientdata(client, ch7322);
+
+ /* Disable auto mode */
+ ret = regmap_write(ch7322->regmap, CH7322_MODE, CH7322_MODE_SW);
+ if (ret)
+ goto err_mutex;
+
+ ret = ch7322_mask_interrupt(ch7322);
+ if (ret)
+ goto err_mutex;
+
+ /* Configure HPDO pin as interrupt */
+ ret = regmap_write(ch7322->regmap, CH7322_CFG1, 0);
+ if (ret)
+ goto err_mutex;
+
+ /* Enable logical address register */
+ ret = regmap_update_bits(ch7322->regmap, CH7322_CTL,
+ CH7322_CTL_SPADL, CH7322_CTL_SPADL);
+ if (ret)
+ goto err_mutex;
+
+ ch7322->cec = cec_allocate_adapter(&ch7322_cec_adap_ops, ch7322,
+ dev_name(&client->dev),
+ CEC_CAP_DEFAULTS, 1);
+
+ if (IS_ERR(ch7322->cec)) {
+ ret = PTR_ERR(ch7322->cec);
+ goto err_mutex;
+ }
+
+ ret = cec_register_adapter(ch7322->cec, &client->dev);
+ if (ret) {
+ cec_delete_adapter(ch7322->cec);
+ goto err_mutex;
+ }
+
+ ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ ch7322_irq,
+ IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+ client->name, ch7322);
+ if (ret)
+ goto err_cec;
+
+ ch7322_handle_events(ch7322);
+
+ dev_info(&client->dev, "device registered\n");
+
+ return 0;
+
+err_cec:
+ cec_unregister_adapter(ch7322->cec);
+
+err_mutex:
+ mutex_destroy(&ch7322->mutex);
+ return ret;
+}
+
+static int ch7322_remove(struct i2c_client *client)
+{
+ struct ch7322 *ch7322 = i2c_get_clientdata(client);
+
+ /* Mask interrupt */
+ mutex_lock(&ch7322->mutex);
+ regmap_write(ch7322->regmap, CH7322_INTCTL, CH7322_INTCTL_INTPB);
+ mutex_unlock(&ch7322->mutex);
+
+ cec_unregister_adapter(ch7322->cec);
+ mutex_destroy(&ch7322->mutex);
+
+ dev_info(&client->dev, "device unregistered\n");
+
+ return 0;
+}
+
+static const struct of_device_id ch7322_of_match[] = {
+ { .compatible = "chrontel,ch7322", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ch7322_of_match);
+
+static struct i2c_driver ch7322_i2c_driver = {
+ .driver = {
+ .name = "ch7322",
+ .of_match_table = of_match_ptr(ch7322_of_match),
+ },
+ .probe_new = ch7322_probe,
+ .remove = ch7322_remove,
+};
+
+module_i2c_driver(ch7322_i2c_driver);
+
+MODULE_DESCRIPTION("Chrontel CH7322 CEC Controller Driver");
+MODULE_AUTHOR("Jeff Chase <jnchase@google.com>");
+MODULE_LICENSE("GPL");
--
2.27.0.rc0.183.gde8f92d652-goog
^ permalink raw reply related [flat|nested] 8+ messages in thread