From: Rob Herring <robh+dt@kernel.org> To: Stefan Wahren <wahrenst@gmx.net> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>, Scott Branden <sbranden@broadcom.com>, Wolfram Sang <wsa@the-dreams.de>, Stephen Boyd <sboyd@kernel.org>, Ray Jui <rjui@broadcom.com>, Michael Turquette <mturquette@baylibre.com>, Eric Anholt <eric@anholt.net>, "maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE" <bcm-kernel-feedback-list@broadcom.com>, Linux I2C <linux-i2c@vger.kernel.org>, linux-clk <linux-clk@vger.kernel.org>, "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <linux-arm-kernel@lists.infradead.org>, "moderated list:BROADCOM BCM2835 ARM ARCHITECTURE" <linux-rpi-kernel@lists.infradead.org> Subject: Re: [PATCH V2 09/13] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema Date: Wed, 14 Aug 2019 17:06:35 -0600 [thread overview] Message-ID: <CAL_Jsq+=0Jvz+xx8sn9v_Q-WYCn5fACBhwSGORcMNXXxocCkpQ@mail.gmail.com> (raw) In-Reply-To: <f9acf678-854d-720d-3c84-d9a05766c02e@gmx.net> On Wed, Aug 14, 2019 at 1:21 PM Stefan Wahren <wahrenst@gmx.net> wrote: > > Hi Rob, > > Am 13.08.19 um 19:22 schrieb Rob Herring: > > On Tue, Aug 13, 2019 at 10:21 AM Stefan Wahren <wahrenst@gmx.net> wrote: > >> Convert the BCM2835/6/7 SoC bindings to DT schema format using json-schema. > >> All the other Broadcom boards are maintained by Florian Fainelli. > >> > >> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> > >> Acked-by: Eric Anholt <eric@anholt.net> > >> --- > >> .../devicetree/bindings/arm/bcm/bcm2835.yaml | 46 +++++++++++++++ > >> .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 67 ---------------------- > >> 2 files changed, 46 insertions(+), 67 deletions(-) > >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml > >> delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt > >> > >> diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml > >> new file mode 100644 > >> index 0000000..1a4be26 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml > >> @@ -0,0 +1,46 @@ > >> +# SPDX-License-Identifier: GPL-2.0 > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings > >> + > >> +maintainers: > >> + - Eric Anholt <eric@anholt.net> > >> + - Stefan Wahren <wahrenst@gmx.net> > >> + > >> +properties: > >> + $nodename: > >> + const: '/' > >> + compatible: > >> + oneOf: > >> + - description: BCM2835 based Boards > >> + items: > >> + - enum: > >> + - raspberrypi,model-a > >> + - raspberrypi,model-a-plus > >> + - raspberrypi,model-b > >> + - raspberrypi,model-b-i2c0 # Raspberry Pi Model B (no P5) > >> + - raspberrypi,model-b-rev2 > >> + - raspberrypi,model-b-plus > >> + - raspberrypi,compute-module > >> + - raspberrypi,model-zero > >> + - raspberrypi,model-zero-w > >> + - const: brcm,bcm2835 > >> + > >> + - description: BCM2836 based Boards > >> + items: > >> + - enum: > >> + - raspberrypi,2-model-b > > Don't you need brcm,bcm2836 here? > > > >> + > >> + - description: BCM2837 based Boards > >> + items: > >> + - enum: > >> + - raspberrypi,3-model-a-plus > >> + - raspberrypi,3-model-b > >> + - raspberrypi,3-model-b-plus > >> + - raspberrypi,3-compute-module > >> + - raspberrypi,3-compute-module-lite > > Don't you need brcm,bcm2837 here? > > > > Please run 'dtbs_check' and make sure there aren't warnings (in the root node). > > thanks, after addressing your comments the root node doesn't have > warnings anymore. > > Beside that there a lot of other warnings: > > DTC arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml > CHECK arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > arm-pmu: compatible: ['arm,cortex-a72-pmu', 'arm,armv8-pmuv3'] is too long > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > arm-pmu: compatible: Additional items are not allowed ('arm,armv8-pmuv3' > was unexpected) > > I think the schema is a little bit too strict by prohibit a fallback > compatible. IIRC, Will Deacon said there wasn't any point to fallbacks as every cpu has its own list of events. Or if we want a fallback, then add it to the schema. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201800: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > > In the old txt version this was an allowed property. You really need an override? Haven't seen that in a while. We can drop 'additionalProperties: false' in the pl011 schema. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: $nodename:0: 'firmware' does not match > '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: '#address-cells' is a required property > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: '#size-cells' is a required property > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: 'ranges' is a required property > > I suggest to fix this by removing the "simple-bus". Probably. 'firmware' doesn't sound like a bus. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201a00: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > gpio@7e200000: 'pinctrl-0' is a dependency of 'pinctrl-names' > > This could be fixed by removing pinctrl-names. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201600: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > gic400@40041000: $nodename:0: 'gic400@40041000' does not match > '^interrupt-controller(@[0-9a-f,]+)*$' > > I will rename gic400 to interrupt-controller. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201400: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201000: compatible: ['brcm,bcm2835-pl011', 'arm,pl011', > 'arm,primecell'] is not valid under any of the given schemas > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201000: Additional properties are not allowed ('bluetooth', > 'arm,primecell-periphid' were unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > sd_io_1v8_reg: states:0: [1800000, 1, 3300000, 0] is too long > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > sd_io_1v8_reg: states:0: Additional items are not allowed (3300000, 0 > were unexpected) > > No idea what is wrong here The schema is stricter about <> groupings is my guess. Looks like this should be 2 entries with 2 cells each. > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > #size-cells:0:0: 0 is not one of [1, 2] > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > clock@3:reg:0: [3] is too short > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > clock@4:reg:0: [4] is too short > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > 'ranges' is a required property > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' > > This could be fixed by avoiding a simple-bus for the fixed clocks. Right, they are not a bus. Rob
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh+dt@kernel.org> To: Stefan Wahren <wahrenst@gmx.net> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>, Scott Branden <sbranden@broadcom.com>, Wolfram Sang <wsa@the-dreams.de>, Stephen Boyd <sboyd@kernel.org>, Ray Jui <rjui@broadcom.com>, Michael Turquette <mturquette@baylibre.com>, Eric Anholt <eric@anholt.net>, "maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE" <bcm-kernel-feedback-list@broadcom.com>, Linux I2C <linux-i2c@vger.kernel.org>, linux-clk <linux-clk@vger.kernel.org>, "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <linux-arm-kernel@lists.infradead.org>, "moderated list:BROADCOM BCM2835 ARM ARCHITECTURE" <linux-rpi-kernel@lists.infradead.org> Subject: Re: [PATCH V2 09/13] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema Date: Wed, 14 Aug 2019 17:06:35 -0600 [thread overview] Message-ID: <CAL_Jsq+=0Jvz+xx8sn9v_Q-WYCn5fACBhwSGORcMNXXxocCkpQ@mail.gmail.com> (raw) In-Reply-To: <f9acf678-854d-720d-3c84-d9a05766c02e@gmx.net> On Wed, Aug 14, 2019 at 1:21 PM Stefan Wahren <wahrenst@gmx.net> wrote: > > Hi Rob, > > Am 13.08.19 um 19:22 schrieb Rob Herring: > > On Tue, Aug 13, 2019 at 10:21 AM Stefan Wahren <wahrenst@gmx.net> wrote: > >> Convert the BCM2835/6/7 SoC bindings to DT schema format using json-schema. > >> All the other Broadcom boards are maintained by Florian Fainelli. > >> > >> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> > >> Acked-by: Eric Anholt <eric@anholt.net> > >> --- > >> .../devicetree/bindings/arm/bcm/bcm2835.yaml | 46 +++++++++++++++ > >> .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 67 ---------------------- > >> 2 files changed, 46 insertions(+), 67 deletions(-) > >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml > >> delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt > >> > >> diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml > >> new file mode 100644 > >> index 0000000..1a4be26 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml > >> @@ -0,0 +1,46 @@ > >> +# SPDX-License-Identifier: GPL-2.0 > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings > >> + > >> +maintainers: > >> + - Eric Anholt <eric@anholt.net> > >> + - Stefan Wahren <wahrenst@gmx.net> > >> + > >> +properties: > >> + $nodename: > >> + const: '/' > >> + compatible: > >> + oneOf: > >> + - description: BCM2835 based Boards > >> + items: > >> + - enum: > >> + - raspberrypi,model-a > >> + - raspberrypi,model-a-plus > >> + - raspberrypi,model-b > >> + - raspberrypi,model-b-i2c0 # Raspberry Pi Model B (no P5) > >> + - raspberrypi,model-b-rev2 > >> + - raspberrypi,model-b-plus > >> + - raspberrypi,compute-module > >> + - raspberrypi,model-zero > >> + - raspberrypi,model-zero-w > >> + - const: brcm,bcm2835 > >> + > >> + - description: BCM2836 based Boards > >> + items: > >> + - enum: > >> + - raspberrypi,2-model-b > > Don't you need brcm,bcm2836 here? > > > >> + > >> + - description: BCM2837 based Boards > >> + items: > >> + - enum: > >> + - raspberrypi,3-model-a-plus > >> + - raspberrypi,3-model-b > >> + - raspberrypi,3-model-b-plus > >> + - raspberrypi,3-compute-module > >> + - raspberrypi,3-compute-module-lite > > Don't you need brcm,bcm2837 here? > > > > Please run 'dtbs_check' and make sure there aren't warnings (in the root node). > > thanks, after addressing your comments the root node doesn't have > warnings anymore. > > Beside that there a lot of other warnings: > > DTC arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml > CHECK arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > arm-pmu: compatible: ['arm,cortex-a72-pmu', 'arm,armv8-pmuv3'] is too long > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > arm-pmu: compatible: Additional items are not allowed ('arm,armv8-pmuv3' > was unexpected) > > I think the schema is a little bit too strict by prohibit a fallback > compatible. IIRC, Will Deacon said there wasn't any point to fallbacks as every cpu has its own list of events. Or if we want a fallback, then add it to the schema. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201800: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > > In the old txt version this was an allowed property. You really need an override? Haven't seen that in a while. We can drop 'additionalProperties: false' in the pl011 schema. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: $nodename:0: 'firmware' does not match > '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: '#address-cells' is a required property > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: '#size-cells' is a required property > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > firmware: 'ranges' is a required property > > I suggest to fix this by removing the "simple-bus". Probably. 'firmware' doesn't sound like a bus. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201a00: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > gpio@7e200000: 'pinctrl-0' is a dependency of 'pinctrl-names' > > This could be fixed by removing pinctrl-names. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201600: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > gic400@40041000: $nodename:0: 'gic400@40041000' does not match > '^interrupt-controller(@[0-9a-f,]+)*$' > > I will rename gic400 to interrupt-controller. > > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201400: Additional properties are not allowed > ('arm,primecell-periphid' was unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201000: compatible: ['brcm,bcm2835-pl011', 'arm,pl011', > 'arm,primecell'] is not valid under any of the given schemas > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > serial@7e201000: Additional properties are not allowed ('bluetooth', > 'arm,primecell-periphid' were unexpected) > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > sd_io_1v8_reg: states:0: [1800000, 1, 3300000, 0] is too long > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > sd_io_1v8_reg: states:0: Additional items are not allowed (3300000, 0 > were unexpected) > > No idea what is wrong here The schema is stricter about <> groupings is my guess. Looks like this should be 2 entries with 2 cells each. > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > #size-cells:0:0: 0 is not one of [1, 2] > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > clock@3:reg:0: [3] is too short > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > clock@4:reg:0: [4] is too short > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: clocks: > 'ranges' is a required property > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' > /home/stefan/torvalds/arch/arm/boot/dts/bcm2711-rpi-4-b.dt.yaml: > clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' > > This could be fixed by avoiding a simple-bus for the fixed clocks. Right, they are not a bus. Rob _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-14 23:06 UTC|newest] Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-13 16:20 [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` [PATCH V2 01/13] ARM: dts: bcm283x: Enable HDMI at board level Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` [PATCH V2 02/13] ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` [PATCH V2 03/13] dt-bindings: bcm2835-cprman: Add bcm2711 support Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-16 17:41 ` Stephen Boyd 2019-08-16 17:41 ` Stephen Boyd 2019-08-16 17:41 ` Stephen Boyd 2019-08-27 16:00 ` Rob Herring 2019-08-27 16:00 ` Rob Herring 2019-08-27 16:00 ` Rob Herring 2019-08-13 16:20 ` [PATCH V2 04/13] clk: bcm2835: Introduce SoC specific clock registration Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` [PATCH V2 05/13] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-09-12 17:24 ` Matthias Brugger 2019-09-12 17:24 ` Matthias Brugger 2019-09-12 17:24 ` Matthias Brugger 2019-09-12 18:52 ` Eric Anholt 2019-09-12 18:52 ` Eric Anholt 2019-09-13 1:20 ` Stefan Wahren 2019-09-13 1:20 ` Stefan Wahren 2019-09-13 1:20 ` Stefan Wahren 2019-09-13 7:13 ` Matthias Brugger 2019-09-13 7:13 ` Matthias Brugger 2019-09-13 7:13 ` Matthias Brugger 2019-09-13 23:02 ` Florian Fainelli 2019-09-13 23:02 ` Florian Fainelli 2019-09-13 23:02 ` Florian Fainelli 2019-08-13 16:20 ` [PATCH V2 06/13] clk: bcm2835: Mark PLLD_PER as CRITICAL Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-16 17:39 ` Stephen Boyd 2019-08-16 17:39 ` Stephen Boyd 2019-08-16 17:39 ` Stephen Boyd 2019-08-13 16:20 ` [PATCH V2 07/13] dt-bindings: i2c: bcm2835: Add brcm, bcm2711 compatible Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` [PATCH V2 07/13] dt-bindings: i2c: bcm2835: Add brcm,bcm2711 compatible Stefan Wahren 2019-08-27 16:00 ` Rob Herring 2019-08-27 16:00 ` Rob Herring 2019-08-27 16:00 ` Rob Herring 2019-08-13 16:20 ` [PATCH V2 08/13] i2c: bcm2835: Avoid clk stretch quirk for BCM2711 Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-14 19:36 ` Wolfram Sang 2019-08-14 19:36 ` Wolfram Sang 2019-08-17 7:32 ` Stefan Wahren 2019-08-17 7:32 ` Stefan Wahren 2019-08-17 7:32 ` Stefan Wahren 2019-08-17 8:30 ` Wolfram Sang 2019-08-17 8:30 ` Wolfram Sang 2019-08-13 16:20 ` [PATCH V2 09/13] dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 17:22 ` Rob Herring 2019-08-13 17:22 ` Rob Herring 2019-08-13 17:22 ` Rob Herring 2019-08-14 19:21 ` Stefan Wahren 2019-08-14 19:21 ` Stefan Wahren 2019-08-14 23:06 ` Rob Herring [this message] 2019-08-14 23:06 ` Rob Herring 2019-08-14 23:06 ` Rob Herring 2019-08-13 16:20 ` [PATCH V2 10/13] dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` [PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-09-10 14:13 ` Matthias Brugger 2019-09-10 14:13 ` Matthias Brugger 2019-09-10 14:13 ` Matthias Brugger 2019-08-13 16:20 ` [PATCH V2 12/13] ARM: dts: Add minimal Raspberry Pi 4 support Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` [PATCH V2 13/13] MAINTAINERS: Add BCM2711 to BCM2835 ARCH Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 16:20 ` Stefan Wahren 2019-08-13 20:42 ` [PATCH V2 00/13] ARM: Add minimal Raspberry Pi 4 support Eric Anholt 2019-08-13 20:42 ` Eric Anholt 2019-08-13 20:42 ` Eric Anholt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CAL_Jsq+=0Jvz+xx8sn9v_Q-WYCn5fACBhwSGORcMNXXxocCkpQ@mail.gmail.com' \ --to=robh+dt@kernel.org \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=eric@anholt.net \ --cc=f.fainelli@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=mturquette@baylibre.com \ --cc=rjui@broadcom.com \ --cc=sboyd@kernel.org \ --cc=sbranden@broadcom.com \ --cc=wahrenst@gmx.net \ --cc=wsa@the-dreams.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.