From: Rob Herring <robh+dt@kernel.org> To: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Cc: Bjorn Helgaas <bhelgaas@google.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, PCI <linux-pci@vger.kernel.org>, Punit Agrawal <punit1.agrawal@toshiba.co.jp>, yuji2.ishikawa@toshiba.co.jp, linux-arm-kernel <linux-arm-kernel@lists.infradead.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Subject: Re: [PATCH 1/3] dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller Date: Wed, 7 Apr 2021 08:18:58 -0500 [thread overview] Message-ID: <CAL_JsqJew19jBJ-WpGNCK2AD+nUQsQBjJ7-ye9Cgort8AuG8mQ@mail.gmail.com> (raw) In-Reply-To: <20210407031839.386088-2-nobuhiro1.iwamatsu@toshiba.co.jp> On Tue, Apr 6, 2021 at 10:19 PM Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> wrote: > > This commit adds the Device Tree binding documentation that allows > to describe the PCIe controller found in Toshiba Visconti SoCs. > > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > --- > .../bindings/pci/toshiba,visconti-pcie.yaml | 121 ++++++++++++++++++ > 1 file changed, 121 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > new file mode 100644 > index 000000000000..8ab60c235007 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > @@ -0,0 +1,121 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + > +description: |+ > + Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP. > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +properties: > + compatible: > + const: toshiba,visconti-pcie > + > + reg: > + items: > + - description: Data Bus Interface (DBI) registers. > + - description: PCIe configuration space region. > + - description: Visconti specific additional registers. > + - description: Visconti specific SMU registers > + - description: Visconti specific memory protection unit registers (MPU) > + > + reg-names: > + items: > + - const: dbi > + - const: config > + - const: ulreg > + - const: smu > + - const: mpu > + > + interrupts: > + maxItems: 1 > + > + clocks: > + items: > + - description: PCIe reference clock > + - description: PCIe system clock > + - description: Auxiliary clock > + > + clock-names: > + items: > + - const: pcie_refclk > + - const: sysclk > + - const: auxclk > + > + num-lanes: > + const: 2 > + > + num-viewport: > + const: 8 Drop this, we detect this now. > + > +required: Drop everything that pci-bus.yaml already requires. > + - reg > + - reg-names > + - interrupts > + - "#address-cells" > + - "#size-cells" > + - "#interrupt-cells" > + - interrupt-map > + - interrupt-map-mask > + - ranges > + - bus-range If you support 0-0xff, there's no need for this to be required. > + - device_type > + - num-lanes > + - num-viewport > + - clocks > + - clock-names > + - max-link-speed > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + pcie: pcie@28400000 { > + compatible = "toshiba,visconti-pcie"; > + reg = <0x0 0x28400000 0x0 0x00400000>, > + <0x0 0x70000000 0x0 0x10000000>, > + <0x0 0x28050000 0x0 0x00010000>, > + <0x0 0x24200000 0x0 0x00002000>, > + <0x0 0x24162000 0x0 0x00001000>; > + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > + device_type = "pci"; > + bus-range = <0x00 0xff>; > + num-lanes = <2>; > + num-viewport = <8>; > + > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>, > + <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>; > + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "intr"; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = > + <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; > + clock-names = "pcie_refclk", "sysclk", "auxclk"; > + max-link-speed = <2>; > + > + status = "disabled"; Don't show status in examples. > + }; > + }; > +... > -- > 2.30.0.rc2 >
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh+dt@kernel.org> To: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Cc: Bjorn Helgaas <bhelgaas@google.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, PCI <linux-pci@vger.kernel.org>, Punit Agrawal <punit1.agrawal@toshiba.co.jp>, yuji2.ishikawa@toshiba.co.jp, linux-arm-kernel <linux-arm-kernel@lists.infradead.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Subject: Re: [PATCH 1/3] dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller Date: Wed, 7 Apr 2021 08:18:58 -0500 [thread overview] Message-ID: <CAL_JsqJew19jBJ-WpGNCK2AD+nUQsQBjJ7-ye9Cgort8AuG8mQ@mail.gmail.com> (raw) In-Reply-To: <20210407031839.386088-2-nobuhiro1.iwamatsu@toshiba.co.jp> On Tue, Apr 6, 2021 at 10:19 PM Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> wrote: > > This commit adds the Device Tree binding documentation that allows > to describe the PCIe controller found in Toshiba Visconti SoCs. > > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > --- > .../bindings/pci/toshiba,visconti-pcie.yaml | 121 ++++++++++++++++++ > 1 file changed, 121 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > new file mode 100644 > index 000000000000..8ab60c235007 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml > @@ -0,0 +1,121 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> > + > +description: |+ > + Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP. > + > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +properties: > + compatible: > + const: toshiba,visconti-pcie > + > + reg: > + items: > + - description: Data Bus Interface (DBI) registers. > + - description: PCIe configuration space region. > + - description: Visconti specific additional registers. > + - description: Visconti specific SMU registers > + - description: Visconti specific memory protection unit registers (MPU) > + > + reg-names: > + items: > + - const: dbi > + - const: config > + - const: ulreg > + - const: smu > + - const: mpu > + > + interrupts: > + maxItems: 1 > + > + clocks: > + items: > + - description: PCIe reference clock > + - description: PCIe system clock > + - description: Auxiliary clock > + > + clock-names: > + items: > + - const: pcie_refclk > + - const: sysclk > + - const: auxclk > + > + num-lanes: > + const: 2 > + > + num-viewport: > + const: 8 Drop this, we detect this now. > + > +required: Drop everything that pci-bus.yaml already requires. > + - reg > + - reg-names > + - interrupts > + - "#address-cells" > + - "#size-cells" > + - "#interrupt-cells" > + - interrupt-map > + - interrupt-map-mask > + - ranges > + - bus-range If you support 0-0xff, there's no need for this to be required. > + - device_type > + - num-lanes > + - num-viewport > + - clocks > + - clock-names > + - max-link-speed > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + pcie: pcie@28400000 { > + compatible = "toshiba,visconti-pcie"; > + reg = <0x0 0x28400000 0x0 0x00400000>, > + <0x0 0x70000000 0x0 0x10000000>, > + <0x0 0x28050000 0x0 0x00010000>, > + <0x0 0x24200000 0x0 0x00002000>, > + <0x0 0x24162000 0x0 0x00001000>; > + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; > + device_type = "pci"; > + bus-range = <0x00 0xff>; > + num-lanes = <2>; > + num-viewport = <8>; > + > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>, > + <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>; > + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "intr"; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = > + <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; > + clock-names = "pcie_refclk", "sysclk", "auxclk"; > + max-link-speed = <2>; > + > + status = "disabled"; Don't show status in examples. > + }; > + }; > +... > -- > 2.30.0.rc2 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-07 13:19 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-07 3:18 [PATCH 0/3] PCI: dwc: Visoconti: PCIe RC controller driver Nobuhiro Iwamatsu 2021-04-07 3:18 ` Nobuhiro Iwamatsu 2021-04-07 3:18 ` [PATCH 1/3] dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller Nobuhiro Iwamatsu 2021-04-07 3:18 ` Nobuhiro Iwamatsu 2021-04-07 13:18 ` Rob Herring [this message] 2021-04-07 13:18 ` Rob Herring 2021-04-08 6:37 ` Nobuhiro Iwamatsu 2021-04-08 6:37 ` Nobuhiro Iwamatsu 2021-04-07 3:18 ` [PATCH 2/3] PCI: dwc: Visoconti: PCIe RC controller driver Nobuhiro Iwamatsu 2021-04-07 3:18 ` Nobuhiro Iwamatsu 2021-04-07 14:27 ` Rob Herring 2021-04-07 14:27 ` Rob Herring 2021-04-08 9:34 ` Nobuhiro Iwamatsu 2021-04-08 9:34 ` Nobuhiro Iwamatsu 2021-04-07 3:18 ` [PATCH 3/3] MAINTAINERS: Add entries for Toshiba Visconti PCIe controller Nobuhiro Iwamatsu 2021-04-07 3:18 ` Nobuhiro Iwamatsu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAL_JsqJew19jBJ-WpGNCK2AD+nUQsQBjJ7-ye9Cgort8AuG8mQ@mail.gmail.com \ --to=robh+dt@kernel.org \ --cc=bhelgaas@google.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=nobuhiro1.iwamatsu@toshiba.co.jp \ --cc=punit1.agrawal@toshiba.co.jp \ --cc=yuji2.ishikawa@toshiba.co.jp \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.