[PATCH 0/2] drm/imx/lcdc: drm driver for imx21/25/27

[PATCH 0/2] drm/imx/lcdc: drm driver for imx21/25/27

[Uwe Kleine-König]

Hello,

this patchset was created mostly by Marian Cichy, who in the meantime
left Pengutronix. I still kept his name and email address as author, but
note that the email address doesn't reach Marian any more.

There is already a maintainer entry for imx DRM drivers that matches
good enough.

This was tested on an i.MX25 based customer machine.

Best regards
Uwe

Marian Cichy (2):
  dt-bindings: display: imx: Add fsl,imx21-lcdc docs
  drm/imx/lcdc: Implement DRM driver for imx21

 .../bindings/display/imx/fsl,imx21-lcdc.yaml  |  79 +++
 drivers/gpu/drm/imx/Kconfig                   |   9 +
 drivers/gpu/drm/imx/Makefile                  |   2 +
 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c   | 631 ++++++++++++++++++
 4 files changed, 721 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
 create mode 100644 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c

-- 
2.34.1

[PATCH 0/2] drm/imx/lcdc: drm driver for imx21/25/27

[Uwe Kleine-König]

Hello,

this patchset was created mostly by Marian Cichy, who in the meantime
left Pengutronix. I still kept his name and email address as author, but
note that the email address doesn't reach Marian any more.

There is already a maintainer entry for imx DRM drivers that matches
good enough.

This was tested on an i.MX25 based customer machine.

Best regards
Uwe

Marian Cichy (2):
  dt-bindings: display: imx: Add fsl,imx21-lcdc docs
  drm/imx/lcdc: Implement DRM driver for imx21

 .../bindings/display/imx/fsl,imx21-lcdc.yaml  |  79 +++
 drivers/gpu/drm/imx/Kconfig                   |   9 +
 drivers/gpu/drm/imx/Makefile                  |   2 +
 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c   | 631 ++++++++++++++++++
 4 files changed, 721 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
 create mode 100644 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 0/2] drm/imx/lcdc: drm driver for imx21/25/27

[Uwe Kleine-König]

Hello,

this patchset was created mostly by Marian Cichy, who in the meantime
left Pengutronix. I still kept his name and email address as author, but
note that the email address doesn't reach Marian any more.

There is already a maintainer entry for imx DRM drivers that matches
good enough.

This was tested on an i.MX25 based customer machine.

Best regards
Uwe

Marian Cichy (2):
  dt-bindings: display: imx: Add fsl,imx21-lcdc docs
  drm/imx/lcdc: Implement DRM driver for imx21

 .../bindings/display/imx/fsl,imx21-lcdc.yaml  |  79 +++
 drivers/gpu/drm/imx/Kconfig                   |   9 +
 drivers/gpu/drm/imx/Makefile                  |   2 +
 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c   | 631 ++++++++++++++++++
 4 files changed, 721 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
 create mode 100644 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c

-- 
2.34.1

[PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

From: Marian Cichy <m.cichy@pengutronix.de>

This files documents the device tree for the new imx21-lcdc DRM driver.

Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 .../bindings/display/imx/fsl,imx21-lcdc.yaml  | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
new file mode 100644
index 000000000000..edf71cfac81c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx21-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX21 LCD Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-lcdc
+      - items:
+          - enum:
+              - fsl,imx25-lcdc
+              - fsl,imx27-lcdc
+          - const: fsl,imx21-lcdc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+      - const: ahb
+
+  resets:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      "Video port for DPI RGB output."
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    lcdc: lcdc@53fbc000 {
+        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
+        reg = <0x53fbc000 0x4000>;
+        interrupts = <39>;
+        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+        clock-names = "ipg", "ahb", "per";
+
+        port {
+             parallel_out: endpoint {
+                 remote-endpoint = <&panel_in>;
+             };
+        };
+
+    };
+
+    panel: panel {
+        compatible = "edt,etm0700g0dh6";
+        power-supply = <&lcd_supply>;
+        backlight = <&bl>;
+
+        port {
+                panel_in: endpoint {
+                        remote-endpoint = <&parallel_out>;
+                };
+        };
+    };
-- 
2.34.1

[PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

From: Marian Cichy <m.cichy@pengutronix.de>

This files documents the device tree for the new imx21-lcdc DRM driver.

Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 .../bindings/display/imx/fsl,imx21-lcdc.yaml  | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
new file mode 100644
index 000000000000..edf71cfac81c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx21-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX21 LCD Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-lcdc
+      - items:
+          - enum:
+              - fsl,imx25-lcdc
+              - fsl,imx27-lcdc
+          - const: fsl,imx21-lcdc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+      - const: ahb
+
+  resets:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      "Video port for DPI RGB output."
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    lcdc: lcdc@53fbc000 {
+        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
+        reg = <0x53fbc000 0x4000>;
+        interrupts = <39>;
+        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+        clock-names = "ipg", "ahb", "per";
+
+        port {
+             parallel_out: endpoint {
+                 remote-endpoint = <&panel_in>;
+             };
+        };
+
+    };
+
+    panel: panel {
+        compatible = "edt,etm0700g0dh6";
+        power-supply = <&lcd_supply>;
+        backlight = <&bl>;
+
+        port {
+                panel_in: endpoint {
+                        remote-endpoint = <&parallel_out>;
+                };
+        };
+    };
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

From: Marian Cichy <m.cichy@pengutronix.de>

This files documents the device tree for the new imx21-lcdc DRM driver.

Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 .../bindings/display/imx/fsl,imx21-lcdc.yaml  | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
new file mode 100644
index 000000000000..edf71cfac81c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx21-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX21 LCD Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-lcdc
+      - items:
+          - enum:
+              - fsl,imx25-lcdc
+              - fsl,imx27-lcdc
+          - const: fsl,imx21-lcdc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+      - const: ahb
+
+  resets:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      "Video port for DPI RGB output."
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    lcdc: lcdc@53fbc000 {
+        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
+        reg = <0x53fbc000 0x4000>;
+        interrupts = <39>;
+        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+        clock-names = "ipg", "ahb", "per";
+
+        port {
+             parallel_out: endpoint {
+                 remote-endpoint = <&panel_in>;
+             };
+        };
+
+    };
+
+    panel: panel {
+        compatible = "edt,etm0700g0dh6";
+        power-supply = <&lcd_supply>;
+        backlight = <&bl>;
+
+        port {
+                panel_in: endpoint {
+                        remote-endpoint = <&parallel_out>;
+                };
+        };
+    };
-- 
2.34.1

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
>
> From: Marian Cichy <m.cichy@pengutronix.de>
>
> This files documents the device tree for the new imx21-lcdc DRM driver.

No, bindings document h/w and the h/w has not changed. We already have
a binding for the LCDC.

>
> Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  .../bindings/display/imx/fsl,imx21-lcdc.yaml  | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
> new file mode 100644
> index 000000000000..edf71cfac81c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/fsl,imx21-lcdc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX21 LCD Controller
> +
> +maintainers:
> +  - Philipp Zabel <p.zabel@pengutronix.de>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: fsl,imx21-lcdc
> +      - items:
> +          - enum:
> +              - fsl,imx25-lcdc
> +              - fsl,imx27-lcdc
> +          - const: fsl,imx21-lcdc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 3
> +
> +  clock-names:
> +    items:
> +      - const: ipg
> +      - const: per
> +      - const: ahb
> +
> +  resets:
> +    maxItems: 1
> +
> +  port:
> +    type: object
> +    description:
> +      "Video port for DPI RGB output."
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lcdc: lcdc@53fbc000 {
> +        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
> +        reg = <0x53fbc000 0x4000>;
> +        interrupts = <39>;
> +        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
> +        clock-names = "ipg", "ahb", "per";
> +
> +        port {
> +             parallel_out: endpoint {
> +                 remote-endpoint = <&panel_in>;
> +             };
> +        };
> +
> +    };
> +
> +    panel: panel {
> +        compatible = "edt,etm0700g0dh6";
> +        power-supply = <&lcd_supply>;
> +        backlight = <&bl>;
> +
> +        port {
> +                panel_in: endpoint {
> +                        remote-endpoint = <&parallel_out>;
> +                };
> +        };
> +    };
> --
> 2.34.1
>

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
>
> From: Marian Cichy <m.cichy@pengutronix.de>
>
> This files documents the device tree for the new imx21-lcdc DRM driver.

No, bindings document h/w and the h/w has not changed. We already have
a binding for the LCDC.

>
> Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  .../bindings/display/imx/fsl,imx21-lcdc.yaml  | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
> new file mode 100644
> index 000000000000..edf71cfac81c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/fsl,imx21-lcdc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX21 LCD Controller
> +
> +maintainers:
> +  - Philipp Zabel <p.zabel@pengutronix.de>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: fsl,imx21-lcdc
> +      - items:
> +          - enum:
> +              - fsl,imx25-lcdc
> +              - fsl,imx27-lcdc
> +          - const: fsl,imx21-lcdc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 3
> +
> +  clock-names:
> +    items:
> +      - const: ipg
> +      - const: per
> +      - const: ahb
> +
> +  resets:
> +    maxItems: 1
> +
> +  port:
> +    type: object
> +    description:
> +      "Video port for DPI RGB output."
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lcdc: lcdc@53fbc000 {
> +        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
> +        reg = <0x53fbc000 0x4000>;
> +        interrupts = <39>;
> +        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
> +        clock-names = "ipg", "ahb", "per";
> +
> +        port {
> +             parallel_out: endpoint {
> +                 remote-endpoint = <&panel_in>;
> +             };
> +        };
> +
> +    };
> +
> +    panel: panel {
> +        compatible = "edt,etm0700g0dh6";
> +        power-supply = <&lcd_supply>;
> +        backlight = <&bl>;
> +
> +        port {
> +                panel_in: endpoint {
> +                        remote-endpoint = <&parallel_out>;
> +                };
> +        };
> +    };
> --
> 2.34.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
>
> From: Marian Cichy <m.cichy@pengutronix.de>
>
> This files documents the device tree for the new imx21-lcdc DRM driver.

No, bindings document h/w and the h/w has not changed. We already have
a binding for the LCDC.

>
> Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  .../bindings/display/imx/fsl,imx21-lcdc.yaml  | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
> new file mode 100644
> index 000000000000..edf71cfac81c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx21-lcdc.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/fsl,imx21-lcdc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX21 LCD Controller
> +
> +maintainers:
> +  - Philipp Zabel <p.zabel@pengutronix.de>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: fsl,imx21-lcdc
> +      - items:
> +          - enum:
> +              - fsl,imx25-lcdc
> +              - fsl,imx27-lcdc
> +          - const: fsl,imx21-lcdc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 3
> +
> +  clock-names:
> +    items:
> +      - const: ipg
> +      - const: per
> +      - const: ahb
> +
> +  resets:
> +    maxItems: 1
> +
> +  port:
> +    type: object
> +    description:
> +      "Video port for DPI RGB output."
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lcdc: lcdc@53fbc000 {
> +        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
> +        reg = <0x53fbc000 0x4000>;
> +        interrupts = <39>;
> +        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
> +        clock-names = "ipg", "ahb", "per";
> +
> +        port {
> +             parallel_out: endpoint {
> +                 remote-endpoint = <&panel_in>;
> +             };
> +        };
> +
> +    };
> +
> +    panel: panel {
> +        compatible = "edt,etm0700g0dh6";
> +        power-supply = <&lcd_supply>;
> +        backlight = <&bl>;
> +
> +        port {
> +                panel_in: endpoint {
> +                        remote-endpoint = <&parallel_out>;
> +                };
> +        };
> +    };
> --
> 2.34.1
>

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 989 bytes --]

Hello Rob,

On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> <u.kleine-koenig@pengutronix.de> wrote:
> >
> > From: Marian Cichy <m.cichy@pengutronix.de>
> >
> > This files documents the device tree for the new imx21-lcdc DRM driver.
> 
> No, bindings document h/w and the h/w has not changed. We already have
> a binding for the LCDC.

Just to be sure we're talking about the same thing: You're refering to
Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?

I'm unsure what to do now. Should the two different bindings just be
described in the same file? Should I stick to fsl,imx21-fb even for the
new binding? (The hardware unit is named LCDC, so the name chosen here
is the better one.) Please advise.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1.1: Type: text/plain, Size: 989 bytes --]

Hello Rob,

On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> <u.kleine-koenig@pengutronix.de> wrote:
> >
> > From: Marian Cichy <m.cichy@pengutronix.de>
> >
> > This files documents the device tree for the new imx21-lcdc DRM driver.
> 
> No, bindings document h/w and the h/w has not changed. We already have
> a binding for the LCDC.

Just to be sure we're talking about the same thing: You're refering to
Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?

I'm unsure what to do now. Should the two different bindings just be
described in the same file? Should I stick to fsl,imx21-fb even for the
new binding? (The hardware unit is named LCDC, so the name chosen here
is the better one.) Please advise.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 989 bytes --]

Hello Rob,

On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> <u.kleine-koenig@pengutronix.de> wrote:
> >
> > From: Marian Cichy <m.cichy@pengutronix.de>
> >
> > This files documents the device tree for the new imx21-lcdc DRM driver.
> 
> No, bindings document h/w and the h/w has not changed. We already have
> a binding for the LCDC.

Just to be sure we're talking about the same thing: You're refering to
Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?

I'm unsure what to do now. Should the two different bindings just be
described in the same file? Should I stick to fsl,imx21-fb even for the
new binding? (The hardware unit is named LCDC, so the name chosen here
is the better one.) Please advise.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> Hello Rob,
> 
> On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > <u.kleine-koenig@pengutronix.de> wrote:
> > >
> > > From: Marian Cichy <m.cichy@pengutronix.de>
> > >
> > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > 
> > No, bindings document h/w and the h/w has not changed. We already have
> > a binding for the LCDC.
> 
> Just to be sure we're talking about the same thing: You're refering to
> Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?

Looks right...

> I'm unsure what to do now. Should the two different bindings just be
> described in the same file? Should I stick to fsl,imx21-fb even for the
> new binding? (The hardware unit is named LCDC, so the name chosen here
> is the better one.) Please advise.

Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
unchanged (unless you want to add new optional properties). 

Rob

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> Hello Rob,
> 
> On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > <u.kleine-koenig@pengutronix.de> wrote:
> > >
> > > From: Marian Cichy <m.cichy@pengutronix.de>
> > >
> > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > 
> > No, bindings document h/w and the h/w has not changed. We already have
> > a binding for the LCDC.
> 
> Just to be sure we're talking about the same thing: You're refering to
> Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?

Looks right...

> I'm unsure what to do now. Should the two different bindings just be
> described in the same file? Should I stick to fsl,imx21-fb even for the
> new binding? (The hardware unit is named LCDC, so the name chosen here
> is the better one.) Please advise.

Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
unchanged (unless you want to add new optional properties). 

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> Hello Rob,
> 
> On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > <u.kleine-koenig@pengutronix.de> wrote:
> > >
> > > From: Marian Cichy <m.cichy@pengutronix.de>
> > >
> > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > 
> > No, bindings document h/w and the h/w has not changed. We already have
> > a binding for the LCDC.
> 
> Just to be sure we're talking about the same thing: You're refering to
> Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?

Looks right...

> I'm unsure what to do now. Should the two different bindings just be
> described in the same file? Should I stick to fsl,imx21-fb even for the
> new binding? (The hardware unit is named LCDC, so the name chosen here
> is the better one.) Please advise.

Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
unchanged (unless you want to add new optional properties). 

Rob

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Lucas Stach]

Hi Rob,

Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > Hello Rob,
> > 
> > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > 
> > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > 
> > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > 
> > > No, bindings document h/w and the h/w has not changed. We already have
> > > a binding for the LCDC.
> > 
> > Just to be sure we're talking about the same thing: You're refering to
> > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> 
> Looks right...
> 
> > I'm unsure what to do now. Should the two different bindings just be
> > described in the same file? Should I stick to fsl,imx21-fb even for the
> > new binding? (The hardware unit is named LCDC, so the name chosen here
> > is the better one.) Please advise.
> 
> Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> unchanged (unless you want to add new optional properties). 
> 
The old FB driver binding is pretty insane. Except the reg and
interrupt properties it is very confused about things. It exposes
internal implementation details (like specifying verbatim register
settings in the DT) and other properties are just misplaced, like the
lcd-supply property that controls the panel power supply.

I really don't think that trying to stay backwards compatible here is a
win for anyone. Anyone willing to switch their systems running on a 15
year old SoC to the new DRM driver probably doesn't mind if they have
to modify the DTS to make it work. Can we please let the FB driver die
in peace and have a clean slate driver/binding for the DRM driver?

Regards,
Lucas

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Lucas Stach]

Hi Rob,

Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > Hello Rob,
> > 
> > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > 
> > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > 
> > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > 
> > > No, bindings document h/w and the h/w has not changed. We already have
> > > a binding for the LCDC.
> > 
> > Just to be sure we're talking about the same thing: You're refering to
> > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> 
> Looks right...
> 
> > I'm unsure what to do now. Should the two different bindings just be
> > described in the same file? Should I stick to fsl,imx21-fb even for the
> > new binding? (The hardware unit is named LCDC, so the name chosen here
> > is the better one.) Please advise.
> 
> Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> unchanged (unless you want to add new optional properties). 
> 
The old FB driver binding is pretty insane. Except the reg and
interrupt properties it is very confused about things. It exposes
internal implementation details (like specifying verbatim register
settings in the DT) and other properties are just misplaced, like the
lcd-supply property that controls the panel power supply.

I really don't think that trying to stay backwards compatible here is a
win for anyone. Anyone willing to switch their systems running on a 15
year old SoC to the new DRM driver probably doesn't mind if they have
to modify the DTS to make it work. Can we please let the FB driver die
in peace and have a clean slate driver/binding for the DRM driver?

Regards,
Lucas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Lucas Stach]

Hi Rob,

Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > Hello Rob,
> > 
> > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > 
> > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > 
> > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > 
> > > No, bindings document h/w and the h/w has not changed. We already have
> > > a binding for the LCDC.
> > 
> > Just to be sure we're talking about the same thing: You're refering to
> > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> 
> Looks right...
> 
> > I'm unsure what to do now. Should the two different bindings just be
> > described in the same file? Should I stick to fsl,imx21-fb even for the
> > new binding? (The hardware unit is named LCDC, so the name chosen here
> > is the better one.) Please advise.
> 
> Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> unchanged (unless you want to add new optional properties). 
> 
The old FB driver binding is pretty insane. Except the reg and
interrupt properties it is very confused about things. It exposes
internal implementation details (like specifying verbatim register
settings in the DT) and other properties are just misplaced, like the
lcd-supply property that controls the panel power supply.

I really don't think that trying to stay backwards compatible here is a
win for anyone. Anyone willing to switch their systems running on a 15
year old SoC to the new DRM driver probably doesn't mind if they have
to modify the DTS to make it work. Can we please let the FB driver die
in peace and have a clean slate driver/binding for the DRM driver?

Regards,
Lucas

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 2610 bytes --]

Hi Rob,

On Thu, Feb 10, 2022 at 06:54:13PM +0100, Lucas Stach wrote:
> Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > > 
> > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > > 
> > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > > 
> > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > a binding for the LCDC.
> > > 
> > > Just to be sure we're talking about the same thing: You're refering to
> > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> > 
> > Looks right...
> > 
> > > I'm unsure what to do now. Should the two different bindings just be
> > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > is the better one.) Please advise.
> > 
> > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> > unchanged (unless you want to add new optional properties). 
>
> The old FB driver binding is pretty insane. Except the reg and
> interrupt properties it is very confused about things. It exposes
> internal implementation details (like specifying verbatim register
> settings in the DT) and other properties are just misplaced, like the
> lcd-supply property that controls the panel power supply.
> 
> I really don't think that trying to stay backwards compatible here is a
> win for anyone. Anyone willing to switch their systems running on a 15
> year old SoC to the new DRM driver probably doesn't mind if they have
> to modify the DTS to make it work. Can we please let the FB driver die
> in peace and have a clean slate driver/binding for the DRM driver?

Does this feedback change anything on your side? My expectation is that
the graphics people will be happy about every fb driver being replaced
by a DRM driver and there will be hardly any incentive to add a layer
over the DRM driver to make it honor the old fb binding.

Assume I convert the old binding to yaml and then add the newly
supported binding to that using a big oneOf, would that be an acceptable
compromise?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1.1: Type: text/plain, Size: 2610 bytes --]

Hi Rob,

On Thu, Feb 10, 2022 at 06:54:13PM +0100, Lucas Stach wrote:
> Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > > 
> > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > > 
> > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > > 
> > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > a binding for the LCDC.
> > > 
> > > Just to be sure we're talking about the same thing: You're refering to
> > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> > 
> > Looks right...
> > 
> > > I'm unsure what to do now. Should the two different bindings just be
> > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > is the better one.) Please advise.
> > 
> > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> > unchanged (unless you want to add new optional properties). 
>
> The old FB driver binding is pretty insane. Except the reg and
> interrupt properties it is very confused about things. It exposes
> internal implementation details (like specifying verbatim register
> settings in the DT) and other properties are just misplaced, like the
> lcd-supply property that controls the panel power supply.
> 
> I really don't think that trying to stay backwards compatible here is a
> win for anyone. Anyone willing to switch their systems running on a 15
> year old SoC to the new DRM driver probably doesn't mind if they have
> to modify the DTS to make it work. Can we please let the FB driver die
> in peace and have a clean slate driver/binding for the DRM driver?

Does this feedback change anything on your side? My expectation is that
the graphics people will be happy about every fb driver being replaced
by a DRM driver and there will be hardly any incentive to add a layer
over the DRM driver to make it honor the old fb binding.

Assume I convert the old binding to yaml and then add the newly
supported binding to that using a big oneOf, would that be an acceptable
compromise?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 2610 bytes --]

Hi Rob,

On Thu, Feb 10, 2022 at 06:54:13PM +0100, Lucas Stach wrote:
> Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > > 
> > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > > 
> > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > > 
> > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > a binding for the LCDC.
> > > 
> > > Just to be sure we're talking about the same thing: You're refering to
> > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> > 
> > Looks right...
> > 
> > > I'm unsure what to do now. Should the two different bindings just be
> > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > is the better one.) Please advise.
> > 
> > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> > unchanged (unless you want to add new optional properties). 
>
> The old FB driver binding is pretty insane. Except the reg and
> interrupt properties it is very confused about things. It exposes
> internal implementation details (like specifying verbatim register
> settings in the DT) and other properties are just misplaced, like the
> lcd-supply property that controls the panel power supply.
> 
> I really don't think that trying to stay backwards compatible here is a
> win for anyone. Anyone willing to switch their systems running on a 15
> year old SoC to the new DRM driver probably doesn't mind if they have
> to modify the DTS to make it work. Can we please let the FB driver die
> in peace and have a clean slate driver/binding for the DRM driver?

Does this feedback change anything on your side? My expectation is that
the graphics people will be happy about every fb driver being replaced
by a DRM driver and there will be hardly any incentive to add a layer
over the DRM driver to make it honor the old fb binding.

Assume I convert the old binding to yaml and then add the newly
supported binding to that using a big oneOf, would that be an acceptable
compromise?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 2861 bytes --]

Hi Rob,

On Mon, Feb 21, 2022 at 02:55:36PM +0100, Uwe Kleine-König wrote:
> On Thu, Feb 10, 2022 at 06:54:13PM +0100, Lucas Stach wrote:
> > Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > > > 
> > > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > > > 
> > > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > > > 
> > > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > > a binding for the LCDC.
> > > > 
> > > > Just to be sure we're talking about the same thing: You're refering to
> > > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> > > 
> > > Looks right...
> > > 
> > > > I'm unsure what to do now. Should the two different bindings just be
> > > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > > is the better one.) Please advise.
> > > 
> > > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> > > unchanged (unless you want to add new optional properties). 
> >
> > The old FB driver binding is pretty insane. Except the reg and
> > interrupt properties it is very confused about things. It exposes
> > internal implementation details (like specifying verbatim register
> > settings in the DT) and other properties are just misplaced, like the
> > lcd-supply property that controls the panel power supply.
> > 
> > I really don't think that trying to stay backwards compatible here is a
> > win for anyone. Anyone willing to switch their systems running on a 15
> > year old SoC to the new DRM driver probably doesn't mind if they have
> > to modify the DTS to make it work. Can we please let the FB driver die
> > in peace and have a clean slate driver/binding for the DRM driver?
> 
> Does this feedback change anything on your side? My expectation is that
> the graphics people will be happy about every fb driver being replaced
> by a DRM driver and there will be hardly any incentive to add a layer
> over the DRM driver to make it honor the old fb binding.
> 
> Assume I convert the old binding to yaml and then add the newly
> supported binding to that using a big oneOf, would that be an acceptable
> compromise?

I'd like to get forward with this driver. What would be a good way to
continue here? 

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1.1: Type: text/plain, Size: 2861 bytes --]

Hi Rob,

On Mon, Feb 21, 2022 at 02:55:36PM +0100, Uwe Kleine-König wrote:
> On Thu, Feb 10, 2022 at 06:54:13PM +0100, Lucas Stach wrote:
> > Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > > > 
> > > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > > > 
> > > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > > > 
> > > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > > a binding for the LCDC.
> > > > 
> > > > Just to be sure we're talking about the same thing: You're refering to
> > > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> > > 
> > > Looks right...
> > > 
> > > > I'm unsure what to do now. Should the two different bindings just be
> > > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > > is the better one.) Please advise.
> > > 
> > > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> > > unchanged (unless you want to add new optional properties). 
> >
> > The old FB driver binding is pretty insane. Except the reg and
> > interrupt properties it is very confused about things. It exposes
> > internal implementation details (like specifying verbatim register
> > settings in the DT) and other properties are just misplaced, like the
> > lcd-supply property that controls the panel power supply.
> > 
> > I really don't think that trying to stay backwards compatible here is a
> > win for anyone. Anyone willing to switch their systems running on a 15
> > year old SoC to the new DRM driver probably doesn't mind if they have
> > to modify the DTS to make it work. Can we please let the FB driver die
> > in peace and have a clean slate driver/binding for the DRM driver?
> 
> Does this feedback change anything on your side? My expectation is that
> the graphics people will be happy about every fb driver being replaced
> by a DRM driver and there will be hardly any incentive to add a layer
> over the DRM driver to make it honor the old fb binding.
> 
> Assume I convert the old binding to yaml and then add the newly
> supported binding to that using a big oneOf, would that be an acceptable
> compromise?

I'd like to get forward with this driver. What would be a good way to
continue here? 

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 2861 bytes --]

Hi Rob,

On Mon, Feb 21, 2022 at 02:55:36PM +0100, Uwe Kleine-König wrote:
> On Thu, Feb 10, 2022 at 06:54:13PM +0100, Lucas Stach wrote:
> > Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > > > 
> > > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > > > 
> > > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > > > 
> > > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > > a binding for the LCDC.
> > > > 
> > > > Just to be sure we're talking about the same thing: You're refering to
> > > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> > > 
> > > Looks right...
> > > 
> > > > I'm unsure what to do now. Should the two different bindings just be
> > > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > > is the better one.) Please advise.
> > > 
> > > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and 
> > > unchanged (unless you want to add new optional properties). 
> >
> > The old FB driver binding is pretty insane. Except the reg and
> > interrupt properties it is very confused about things. It exposes
> > internal implementation details (like specifying verbatim register
> > settings in the DT) and other properties are just misplaced, like the
> > lcd-supply property that controls the panel power supply.
> > 
> > I really don't think that trying to stay backwards compatible here is a
> > win for anyone. Anyone willing to switch their systems running on a 15
> > year old SoC to the new DRM driver probably doesn't mind if they have
> > to modify the DTS to make it work. Can we please let the FB driver die
> > in peace and have a clean slate driver/binding for the DRM driver?
> 
> Does this feedback change anything on your side? My expectation is that
> the graphics people will be happy about every fb driver being replaced
> by a DRM driver and there will be hardly any incentive to add a layer
> over the DRM driver to make it honor the old fb binding.
> 
> Assume I convert the old binding to yaml and then add the newly
> supported binding to that using a big oneOf, would that be an acceptable
> compromise?

I'd like to get forward with this driver. What would be a good way to
continue here? 

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Thu, Feb 10, 2022 at 11:54 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Hi Rob,
>
> Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > Hello Rob,
> > >
> > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > >
> > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > >
> > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > >
> > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > a binding for the LCDC.
> > >
> > > Just to be sure we're talking about the same thing: You're refering to
> > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> >
> > Looks right...
> >
> > > I'm unsure what to do now. Should the two different bindings just be
> > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > is the better one.) Please advise.
> >
> > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and
> > unchanged (unless you want to add new optional properties).
> >
> The old FB driver binding is pretty insane. Except the reg and
> interrupt properties it is very confused about things. It exposes
> internal implementation details (like specifying verbatim register
> settings in the DT) and other properties are just misplaced, like the
> lcd-supply property that controls the panel power supply.

I agree on 'lcd-supply', but that can simply be marked as deprecated
as can anything else. From what I remember working on these chips, I'm
not sure you can really avoid some of these register properties. For
example, the Sharp config is pretty much a use some value with some
specific Sharp panel. I guess we can have 'if panel A, then register
value is X' type code in the driver. Maybe the DMA settings can be
heuristics based on the pixel data rate, but I recall avoiding
underruns was challenging on some parts.

> I really don't think that trying to stay backwards compatible here is a
> win for anyone. Anyone willing to switch their systems running on a 15
> year old SoC to the new DRM driver probably doesn't mind if they have
> to modify the DTS to make it work. Can we please let the FB driver die
> in peace and have a clean slate driver/binding for the DRM driver?

The existing binding will still need a schema if it appears in dts files.

There's nothing really conflicting between the 2 bindings. Your
choices are to merge it all into 1 node and it's up to kernel
configuration (or module load) to select which driver. Or you have 2
nodes in the DT with one enabled at a time (because 2 enabled nodes at
the same address is not allowed). Then you need a DT change to switch.
Either way is fine and the schema should match which one you pick, but
I would do 1 node.

If you do a new binding, then justify it for the reasons above, not
the old one is for the FB driver and the new one is for the DRM
driver.

Rob

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Thu, Feb 10, 2022 at 11:54 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Hi Rob,
>
> Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > Hello Rob,
> > >
> > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > >
> > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > >
> > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > >
> > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > a binding for the LCDC.
> > >
> > > Just to be sure we're talking about the same thing: You're refering to
> > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> >
> > Looks right...
> >
> > > I'm unsure what to do now. Should the two different bindings just be
> > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > is the better one.) Please advise.
> >
> > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and
> > unchanged (unless you want to add new optional properties).
> >
> The old FB driver binding is pretty insane. Except the reg and
> interrupt properties it is very confused about things. It exposes
> internal implementation details (like specifying verbatim register
> settings in the DT) and other properties are just misplaced, like the
> lcd-supply property that controls the panel power supply.

I agree on 'lcd-supply', but that can simply be marked as deprecated
as can anything else. From what I remember working on these chips, I'm
not sure you can really avoid some of these register properties. For
example, the Sharp config is pretty much a use some value with some
specific Sharp panel. I guess we can have 'if panel A, then register
value is X' type code in the driver. Maybe the DMA settings can be
heuristics based on the pixel data rate, but I recall avoiding
underruns was challenging on some parts.

> I really don't think that trying to stay backwards compatible here is a
> win for anyone. Anyone willing to switch their systems running on a 15
> year old SoC to the new DRM driver probably doesn't mind if they have
> to modify the DTS to make it work. Can we please let the FB driver die
> in peace and have a clean slate driver/binding for the DRM driver?

The existing binding will still need a schema if it appears in dts files.

There's nothing really conflicting between the 2 bindings. Your
choices are to merge it all into 1 node and it's up to kernel
configuration (or module load) to select which driver. Or you have 2
nodes in the DT with one enabled at a time (because 2 enabled nodes at
the same address is not allowed). Then you need a DT change to switch.
Either way is fine and the schema should match which one you pick, but
I would do 1 node.

If you do a new binding, then justify it for the reasons above, not
the old one is for the FB driver and the new one is for the DRM
driver.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] dt-bindings: display: imx: Add fsl,imx21-lcdc docs

[Rob Herring]

On Thu, Feb 10, 2022 at 11:54 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Hi Rob,
>
> Am Dienstag, dem 01.02.2022 um 11:35 -0600 schrieb Rob Herring:
> > On Fri, Jan 28, 2022 at 06:58:29PM +0100, Uwe Kleine-König wrote:
> > > Hello Rob,
> > >
> > > On Fri, Jan 28, 2022 at 07:04:10AM -0600, Rob Herring wrote:
> > > > On Fri, Jan 28, 2022 at 4:59 AM Uwe Kleine-König
> > > > <u.kleine-koenig@pengutronix.de> wrote:
> > > > >
> > > > > From: Marian Cichy <m.cichy@pengutronix.de>
> > > > >
> > > > > This files documents the device tree for the new imx21-lcdc DRM driver.
> > > >
> > > > No, bindings document h/w and the h/w has not changed. We already have
> > > > a binding for the LCDC.
> > >
> > > Just to be sure we're talking about the same thing: You're refering to
> > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt, right?
> >
> > Looks right...
> >
> > > I'm unsure what to do now. Should the two different bindings just be
> > > described in the same file? Should I stick to fsl,imx21-fb even for the
> > > new binding? (The hardware unit is named LCDC, so the name chosen here
> > > is the better one.) Please advise.
> >
> > Yes, the name is unfortunate, but it should be 1 binding, 1 file, and
> > unchanged (unless you want to add new optional properties).
> >
> The old FB driver binding is pretty insane. Except the reg and
> interrupt properties it is very confused about things. It exposes
> internal implementation details (like specifying verbatim register
> settings in the DT) and other properties are just misplaced, like the
> lcd-supply property that controls the panel power supply.

I agree on 'lcd-supply', but that can simply be marked as deprecated
as can anything else. From what I remember working on these chips, I'm
not sure you can really avoid some of these register properties. For
example, the Sharp config is pretty much a use some value with some
specific Sharp panel. I guess we can have 'if panel A, then register
value is X' type code in the driver. Maybe the DMA settings can be
heuristics based on the pixel data rate, but I recall avoiding
underruns was challenging on some parts.

> I really don't think that trying to stay backwards compatible here is a
> win for anyone. Anyone willing to switch their systems running on a 15
> year old SoC to the new DRM driver probably doesn't mind if they have
> to modify the DTS to make it work. Can we please let the FB driver die
> in peace and have a clean slate driver/binding for the DRM driver?

The existing binding will still need a schema if it appears in dts files.

There's nothing really conflicting between the 2 bindings. Your
choices are to merge it all into 1 node and it's up to kernel
configuration (or module load) to select which driver. Or you have 2
nodes in the DT with one enabled at a time (because 2 enabled nodes at
the same address is not allowed). Then you need a DT change to switch.
Either way is fine and the schema should match which one you pick, but
I would do 1 node.

If you do a new binding, then justify it for the reasons above, not
the old one is for the FB driver and the new one is for the DRM
driver.

Rob

[PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[Uwe Kleine-König]

From: Marian Cichy <m.cichy@pengutronix.de>

Add support for the LCD Controller found on i.MX21, i.MX25 and i.MX27

Note there is already a fb driver for this hardware in the tree that is
supposed to be superseded by this one.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/gpu/drm/imx/Kconfig                 |   9 +
 drivers/gpu/drm/imx/Makefile                |   2 +
 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c | 631 ++++++++++++++++++++
 3 files changed, 642 insertions(+)
 create mode 100644 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c

diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig
index bb9738c7c825..62b24ea1bbe0 100644
--- a/drivers/gpu/drm/imx/Kconfig
+++ b/drivers/gpu/drm/imx/Kconfig
@@ -42,3 +42,12 @@ config DRM_IMX_HDMI
 	  Choose this if you want to use HDMI on i.MX6.
 
 source "drivers/gpu/drm/imx/dcss/Kconfig"
+
+config DRM_IMX21_LCDC
+	tristate "Freescale i.MX LCDC displays"
+	depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM || COMPILE_TEST)
+	select DRM_GEM_CMA_HELPER
+	select DRM_KMS_HELPER
+	help
+	  This driver is for the Liquid Crystal Display Controller (LCDC) found
+	  on Freescale i.MX21, i.MX25 and i.MX27.
diff --git a/drivers/gpu/drm/imx/Makefile b/drivers/gpu/drm/imx/Makefile
index b644deffe948..25685230f4f7 100644
--- a/drivers/gpu/drm/imx/Makefile
+++ b/drivers/gpu/drm/imx/Makefile
@@ -10,3 +10,5 @@ obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
 
 obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
 obj-$(CONFIG_DRM_IMX_DCSS) += dcss/
+
+obj-$(CONFIG_DRM_IMX21_LCDC) += imx21-lcdc/
diff --git a/drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c b/drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c
new file mode 100644
index 000000000000..37e75f728293
--- /dev/null
+++ b/drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: 2020 Marian Cichy <kernel@pengutronix.de>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <drm/drm_vblank.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/* LCDC Screen Start Address Register */
+#define IMX21LCDC_LSSAR		0x0000
+
+/* LCDC Size Register */
+#define IMX21LCDC_LSR		0x0004
+#define   IMX21LCDC_LSR_XMAX		GENMASK(25, 20) /* Screen width (in pixels) divided by 16. */
+#define   IMX21LCDC_LSR_YMAX		GENMASK(9, 0)
+
+/* LCDC Virtual Page Width Register */
+#define IMX21LCDC_LVPWR		0x0008
+
+/* LCDC Cursor Position Register */
+#define IMX21LCDC_LCPR		0x000c
+#define   IMX21LCDC_LCPR_CC		GENMASK(31, 30) /* Cursor Control */
+
+/* LCDC Cursor Width Height and Blink Register*/
+#define IMX21LCDC_LCWHB		0x0010
+
+/* LCDC Color Cursor Mapping Register */
+#define IMX21LCDC_LCCMR		0x0014
+
+/* LCDC Panel Configuration Register */
+#define IMX21LCDC_LPCR		0x0018
+#define   IMX21LCDC_LPCR_PCD		GENMASK(5, 0)
+#define   IMX21LCDC_LPCR_SHARP		BIT(6)
+#define   IMX21LCDC_LPCR_SCLKSEL	BIT(7)
+#define   IMX21LCDC_LPCR_ACD		GENMASK(14, 8)
+#define   IMX21LCDC_LPCR_ACDSEL		BIT(15)
+#define   IMX21LCDC_LPCR_REV_VS		BIT(16)
+#define   IMX21LCDC_LPCR_SWAP_SEL	BIT(17)
+#define   IMX21LCDC_LPCR_END_SEL	BIT(18)
+#define   IMX21LCDC_LPCR_SCLKIDLE	BIT(19)
+#define   IMX21LCDC_LPCR_OEPOL		BIT(20)
+#define   IMX21LCDC_LPCR_CLKPOL		BIT(21)
+#define   IMX21LCDC_LPCR_LPPOL		BIT(22)
+#define   IMX21LCDC_LPCR_FLMPOL		BIT(23)
+#define   IMX21LCDC_LPCR_PIXPOL		BIT(24)
+#define   IMX21LCDC_LPCR_BPIX		GENMASK(27, 25)
+#define   IMX21LCDC_LPCR_PBSIZ		GENMASK(29, 28)
+#define   IMX21LCDC_LPCR_COLOR		BIT(30)
+#define   IMX21LCDC_LPCR_TFT		BIT(31)
+
+/* LCDC Horizontal Configuration Register */
+#define IMX21LCDC_LHCR		0x001c
+#define   IMX21LCDC_LHCR_H_WIDTH	GENMASK(31, 26)
+#define   IMX21LCDC_LHCR_H_BPORCH	GENMASK(7, 0)
+#define   IMX21LCDC_LHCR_H_FPORCH	GENMASK(15, 8)
+
+/* LCDC Vertical Configuration Register */
+#define IMX21LCDC_LVCR		0x0020
+#define   IMX21LCDC_LVCR_V_WIDTH	GENMASK(31, 26)
+#define   IMX21LCDC_LVCR_V_BPORCH	GENMASK(7, 0)
+#define   IMX21LCDC_LVCR_V_FPORCH	GENMASK(15, 8)
+
+/* LCDC Panning Offset Register */
+#define IMX21LCDC_LPOR		0x0024
+
+/* LCDC Sharp Configuration Register */
+#define IMX21LCDC_LSCR		0x0028
+
+/* LCDC PWM Contrast Control Register */
+#define IMX21LCDC_LPCCR		0x002c
+
+/* LCDC DMA Control Register */
+#define IMX21LCDC_LDCR		0x0030
+
+/* LCDC Refresh Mode Control Register */
+#define IMX21LCDC_LRMCR		0x0034
+
+/* LCDC Interrupt Configuration Register */
+#define IMX21LCDC_LICR		0x0038
+
+/* LCDC Interrupt Enable Register */
+#define IMX21LCDC_LIER		0x003c
+#define   IMX21LCDC_LIER_EOF		BIT(1)
+
+/* LCDC Interrupt Status Register */
+#define IMX21LCDC_LISR		0x0040
+#define   IMX21LCDC_LISR_EOF		BIT(1)
+
+/* LCDC Graphic Window Start Address Register */
+#define IMX21LCDC_LGWSAR	0x0050
+
+/* LCDC Graph Window Size Register */
+#define IMX21LCDC_LGWSR		0x0054
+
+/* LCDC Graphic Window Virtual Page Width Register */
+#define IMX21LCDC_LGWVPWR	0x0058
+
+/* LCDC Graphic Window Panning Offset Register */
+#define IMX21LCDC_LGWPOR	0x005c
+
+/* LCDC Graphic Window Position Register */
+#define IMX21LCDC_LGWPR		0x0060
+
+/* LCDC Graphic Window Control Register */
+#define IMX21LCDC_LGWCR		0x0064
+
+/* LCDC Graphic Window DMA Control Register */
+#define IMX21LCDC_LGWDCR	0x0068
+
+/* LCDC AUS Mode Control Register */
+#define IMX21LCDC_LAUSCR	0x0080
+
+/* LCDC AUS Mode Cursor Control Register */
+#define IMX21LCDC_LAUSCCR	0x0084
+
+/* Background Lookup Table */
+#define IMX21LCDC_BGLUT		0x0800
+
+/* Graphic Window Lookup Table */
+#define IMX21LCDC_GWLUT		0x0c00
+
+#define BPP_RGB565 0x05
+
+#define LCDC_MIN_XRES 64
+#define LCDC_MIN_YRES 64
+
+#define LCDC_MAX_XRES 1024
+#define LCDC_MAX_YRES 1024
+
+struct imx_lcdc {
+	struct drm_device drm;
+	struct drm_simple_display_pipe pipe;
+	const struct drm_display_mode *mode;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	void __iomem *base;
+
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
+	struct clk *clk_per;
+};
+
+static const u32 imx_lcdc_formats[] = {
+	DRM_FORMAT_RGB565,
+};
+
+static inline struct imx_lcdc *drm_to_lcdc(struct drm_device *drm)
+{
+	return container_of(drm, struct imx_lcdc, drm);
+}
+
+static unsigned int imx_lcdc_get_format(unsigned int drm_format)
+{
+	unsigned int bpp;
+
+	switch (drm_format) {
+	default:
+		DRM_WARN("Format not supported - fallback to RGB565\n");
+		fallthrough;
+	case DRM_FORMAT_RGB565:
+		bpp = BPP_RGB565;
+		break;
+	}
+
+	return bpp;
+}
+
+static int imx_lcdc_connector_get_modes(struct drm_connector *connector)
+{
+	struct imx_lcdc *lcdc = drm_to_lcdc(connector->dev);
+
+	if (lcdc->panel)
+		return drm_panel_get_modes(lcdc->panel, connector);
+
+	return 0;
+}
+
+static const struct drm_connector_helper_funcs imx_lcdc_connector_hfuncs = {
+	.get_modes = imx_lcdc_connector_get_modes,
+};
+
+static const struct drm_connector_funcs imx_lcdc_connector_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
+					 struct drm_plane_state *old_state,
+					 bool mode_set)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_plane_state *new_state = pipe->plane.state;
+	struct drm_framebuffer *fb = new_state->fb;
+	struct imx_lcdc *lcdc = drm_to_lcdc(pipe->crtc.dev);
+	unsigned int bpp = imx_lcdc_get_format(fb->format->format);
+	unsigned int lvcr; /* LVCR-Register value */
+	unsigned int lhcr; /* LHCR-Register value */
+	unsigned int framesize;
+	dma_addr_t addr = drm_fb_cma_get_gem_addr(fb, new_state, 0);
+
+	/* The LSSAR register specifies the LCD screen start address (SSA). */
+	writel(addr, lcdc->base + IMX21LCDC_LSSAR);
+
+	if (!mode_set)
+		return;
+
+	/* Disable PER clock to make register write possible */
+	if (old_state && old_state->crtc && old_state->crtc->enabled)
+		clk_disable_unprepare(lcdc->clk_per);
+
+	/* Framesize */
+	framesize = FIELD_PREP(IMX21LCDC_LSR_XMAX, crtc->mode.hdisplay / 16);
+	framesize |= FIELD_PREP(IMX21LCDC_LSR_YMAX, crtc->mode.vdisplay);
+	writel(framesize, lcdc->base + IMX21LCDC_LSR);
+
+	/* HSYNC */
+	lhcr = FIELD_PREP(IMX21LCDC_LHCR_H_FPORCH, crtc->mode.hsync_start - crtc->mode.hdisplay - 1);
+	lhcr |= FIELD_PREP(IMX21LCDC_LHCR_H_WIDTH, crtc->mode.hsync_end - crtc->mode.hsync_start - 1);
+	lhcr |= FIELD_PREP(IMX21LCDC_LHCR_H_BPORCH, crtc->mode.htotal - crtc->mode.hsync_end - 3);
+	writel(lhcr, lcdc->base + IMX21LCDC_LHCR);
+
+	/* VSYNC */
+	lvcr = FIELD_PREP(IMX21LCDC_LVCR_V_FPORCH, crtc->mode.vsync_start - crtc->mode.vdisplay);
+	lvcr |= FIELD_PREP(IMX21LCDC_LVCR_V_WIDTH, crtc->mode.vsync_end - crtc->mode.vsync_start);
+	lvcr |= FIELD_PREP(IMX21LCDC_LVCR_V_BPORCH, crtc->mode.vtotal - crtc->mode.vsync_end);
+	writel(lvcr, lcdc->base + IMX21LCDC_LVCR);
+
+	writel(readl(lcdc->base + IMX21LCDC_LPCR) | FIELD_PREP(IMX21LCDC_LPCR_BPIX, bpp),
+	       lcdc->base + IMX21LCDC_LPCR);
+
+	/* Virtual Page Width */
+	writel(new_state->fb->pitches[0] / 4, lcdc->base + IMX21LCDC_LVPWR);
+
+	/* Enable PER clock */
+	if (new_state->crtc->enabled)
+		clk_prepare_enable(lcdc->clk_per);
+}
+
+static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
+				 struct drm_crtc_state *crtc_state,
+				 struct drm_plane_state *plane_state)
+{
+	int ret;
+	int clk_div;
+	int bpp;
+	struct imx_lcdc *lcdc = drm_to_lcdc(pipe->crtc.dev);
+	struct drm_display_mode *mode = &pipe->crtc.mode;
+	struct drm_display_info *disp_info = &pipe->connector->display_info;
+	const int hsync_pol = (mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : 1;
+	const int vsync_pol = (mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : 1;
+	const int data_enable_pol =
+		(disp_info->bus_flags & DRM_BUS_FLAG_DE_HIGH) ? 0 : 1;
+	const int clk_pol =
+		(disp_info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE) ? 0 : 1;
+
+	drm_panel_prepare(lcdc->panel);
+
+	clk_div = DIV_ROUND_CLOSEST_ULL(clk_get_rate(lcdc->clk_per),
+					mode->clock * 1000);
+	bpp = imx_lcdc_get_format(plane_state->fb->format->format);
+
+	writel(FIELD_PREP(IMX21LCDC_LPCR_PCD, clk_div - 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_LPPOL, hsync_pol) |
+	       FIELD_PREP(IMX21LCDC_LPCR_FLMPOL, vsync_pol) |
+	       FIELD_PREP(IMX21LCDC_LPCR_OEPOL, data_enable_pol) |
+	       FIELD_PREP(IMX21LCDC_LPCR_TFT, 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_COLOR, 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_PBSIZ, 3) |
+	       FIELD_PREP(IMX21LCDC_LPCR_BPIX, bpp) |
+	       FIELD_PREP(IMX21LCDC_LPCR_SCLKSEL, 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_PIXPOL, 0) |
+	       FIELD_PREP(IMX21LCDC_LPCR_CLKPOL, clk_pol),
+	       lcdc->base + IMX21LCDC_LPCR);
+
+	/* 0px panning offset */
+	writel(0x0, lcdc->base + IMX21LCDC_LPOR);
+
+	/* disable hardware cursor */
+	writel(readl(lcdc->base + IMX21LCDC_LCPR) & ~IMX21LCDC_LCPR_CC,
+	       lcdc->base + IMX21LCDC_LCPR);
+
+	ret = clk_prepare_enable(lcdc->clk_ipg);
+	if (ret) {
+		dev_err(pipe->crtc.dev->dev, "Cannot enable ipg clock: %pe\n", ERR_PTR(ret));
+		return;
+	}
+	ret = clk_prepare_enable(lcdc->clk_ahb);
+	if (ret) {
+		dev_err(pipe->crtc.dev->dev, "Cannot enable ahb clock: %pe\n", ERR_PTR(ret));
+		clk_disable_unprepare(lcdc->clk_ipg);
+		return;
+	}
+
+	imx_lcdc_update_hw_registers(pipe, NULL, true);
+	drm_panel_enable(lcdc->panel);
+
+	/* Enable VBLANK Interrupt */
+	writel(IMX21LCDC_LIER_EOF, lcdc->base + IMX21LCDC_LIER);
+}
+
+static void imx_lcdc_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct imx_lcdc *lcdc = drm_to_lcdc(pipe->crtc.dev);
+	struct drm_panel *panel = lcdc->panel;
+	struct drm_crtc *crtc = &lcdc->pipe.crtc;
+	struct drm_pending_vblank_event *event;
+
+	drm_panel_disable(panel);
+
+	clk_disable_unprepare(lcdc->clk_ahb);
+	clk_disable_unprepare(lcdc->clk_ipg);
+
+	if (pipe->crtc.enabled)
+		clk_disable_unprepare(lcdc->clk_per);
+
+	drm_panel_unprepare(panel);
+
+	spin_lock_irq(&lcdc->drm.event_lock);
+	event = crtc->state->event;
+	if (event) {
+		crtc->state->event = NULL;
+		drm_crtc_send_vblank_event(crtc, event);
+	}
+	spin_unlock_irq(&lcdc->drm.event_lock);
+
+	/* Disable VBLANK Interrupt */
+	writel(0, lcdc->base + IMX21LCDC_LIER);
+}
+
+static int imx_lcdc_pipe_check(struct drm_simple_display_pipe *pipe,
+			       struct drm_plane_state *plane_state,
+			       struct drm_crtc_state *crtc_state)
+{
+	const struct drm_display_mode *mode = &crtc_state->mode;
+
+	if ((mode->hdisplay < LCDC_MIN_XRES || mode->hdisplay > LCDC_MAX_XRES) ||
+	    (mode->vdisplay < LCDC_MIN_YRES || mode->vdisplay > LCDC_MAX_YRES) ||
+	    (mode->hdisplay % 16)) {
+		DRM_ERROR("unsupported display mode (%u x %u)\n",
+			  mode->hdisplay, mode->vdisplay);
+		return -EINVAL;
+	}
+
+	if (!FIELD_FIT(IMX21LCDC_LHCR_H_FPORCH, mode->hsync_start - mode->hdisplay - 1) ||
+	    !FIELD_FIT(IMX21LCDC_LHCR_H_WIDTH, mode->hsync_end - mode->hsync_start - 1) ||
+	    !FIELD_FIT(IMX21LCDC_LHCR_H_BPORCH, mode->htotal - mode->hsync_end - 3)) {
+		DRM_ERROR("invalid HSYNC setting (htotal = %hu, hsync_start = %hu, hsync_end = %hu, hdisplay = %hu)\n",
+			  mode->htotal, mode->hsync_start, mode->hsync_end, mode->hdisplay);
+		return -EINVAL;
+	}
+	if (!FIELD_FIT(IMX21LCDC_LVCR_V_FPORCH, mode->vsync_start - mode->vdisplay) ||
+	    !FIELD_FIT(IMX21LCDC_LVCR_V_WIDTH, mode->vsync_end - mode->vsync_start) ||
+	    !FIELD_FIT(IMX21LCDC_LVCR_V_BPORCH, mode->vtotal - mode->vsync_end)) {
+		DRM_ERROR("invalid VSYNC setting (vtotal = %hu, vsync_start = %hu, vsync_end = %hu, vdisplay = %hu)\n",
+			  mode->vtotal, mode->vsync_start, mode->vsync_end, mode->vdisplay);
+		return -EINVAL;
+
+	}
+
+	if (plane_state->fb->pitches[0] % 4) {
+		DRM_ERROR("invalid pitches setting (%hu)\n", plane_state->fb->pitches[0]);
+		return -EINVAL;
+	}
+
+	crtc_state->mode_changed =
+		crtc_state->mode.hdisplay != pipe->crtc.state->mode.hdisplay ||
+		crtc_state->mode.vdisplay != pipe->crtc.state->mode.vdisplay ||
+		plane_state->fb->pitches[0] != pipe->plane.state->fb->pitches[0];
+
+	return 0;
+}
+
+static void imx_lcdc_pipe_update(struct drm_simple_display_pipe *pipe,
+				 struct drm_plane_state *old_state)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_pending_vblank_event *event = crtc->state->event;
+	struct drm_plane_state *new_state = pipe->plane.state;
+	struct drm_framebuffer *fb = new_state->fb;
+	struct drm_framebuffer *old_fb = old_state->fb;
+	struct drm_crtc *old_crtc = old_state->crtc;
+	bool mode_changed = false;
+
+	if (old_fb && old_fb->format != fb->format)
+		mode_changed = true;
+	else if (old_crtc != crtc)
+		mode_changed = true;
+	else if (crtc->state->mode_changed)
+		mode_changed = true;
+
+	imx_lcdc_update_hw_registers(pipe, old_state, mode_changed);
+
+	if (event) {
+		crtc->state->event = NULL;
+
+		spin_lock_irq(&crtc->dev->event_lock);
+
+		if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
+			drm_crtc_arm_vblank_event(crtc, event);
+		else
+			drm_crtc_send_vblank_event(crtc, event);
+
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
+}
+
+static const struct drm_simple_display_pipe_funcs imx_lcdc_pipe_funcs = {
+	.enable = imx_lcdc_pipe_enable,
+	.disable = imx_lcdc_pipe_disable,
+	.check = imx_lcdc_pipe_check,
+	.update = imx_lcdc_pipe_update,
+	.prepare_fb = drm_gem_simple_display_pipe_prepare_fb,
+};
+
+static const struct drm_mode_config_funcs imx_lcdc_mode_config_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static const struct drm_mode_config_helper_funcs imx_lcdc_mode_config_helpers = {
+	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
+DEFINE_DRM_GEM_CMA_FOPS(imx_lcdc_drm_fops);
+
+static struct drm_driver imx_lcdc_drm_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.fops = &imx_lcdc_drm_fops,
+	DRM_GEM_CMA_DRIVER_OPS_VMAP,
+	.name = "imx-lcdc",
+	.desc = "i.MX LCDC driver",
+	.date = "20200716",
+};
+
+static const struct of_device_id imx_lcdc_of_dev_id[] = {
+	{ .compatible = "fsl,imx21-lcdc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_lcdc_of_dev_id);
+
+static irqreturn_t irq_handler(int irq, void *arg)
+{
+	struct imx_lcdc *lcdc = (struct imx_lcdc *)arg;
+	struct drm_crtc *crtc = &lcdc->pipe.crtc;
+	unsigned int status;
+
+	status = readl(lcdc->base + IMX21LCDC_LISR);
+
+	if (status & IMX21LCDC_LISR_EOF) {
+		drm_crtc_handle_vblank(crtc);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int imx_lcdc_probe(struct platform_device *pdev)
+{
+	struct imx_lcdc *lcdc;
+	struct drm_device *drm;
+	int irq;
+	int ret;
+	struct device *dev = &pdev->dev;
+
+	lcdc = devm_drm_dev_alloc(&pdev->dev, &imx_lcdc_drm_driver,
+				  struct imx_lcdc, drm);
+	if (!lcdc)
+		return -ENOMEM;
+
+	drm = &lcdc->drm;
+
+	lcdc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lcdc->base))
+		return PTR_ERR(lcdc->base);
+
+	/* Panel */
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &lcdc->panel, &lcdc->bridge);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to find panel or bridge\n");
+
+	/* Get Clocks */
+	lcdc->clk_ipg = devm_clk_get(dev, "ipg");
+	if (IS_ERR(lcdc->clk_ipg))
+		return dev_err_probe(dev, PTR_ERR(lcdc->clk_ipg), "Failed to get ipg clk\n");
+
+	lcdc->clk_ahb = devm_clk_get(dev, "ahb");
+	if (IS_ERR(lcdc->clk_ahb))
+		return dev_err_probe(dev, PTR_ERR(lcdc->clk_ipg), "Failed to get ahb clk\n");
+
+	lcdc->clk_per = devm_clk_get(dev, "per");
+	if (IS_ERR(lcdc->clk_per))
+		return dev_err_probe(dev, PTR_ERR(lcdc->clk_ipg), "Failed to get ahb clk\n");
+
+	ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return dev_err_probe(drm->dev, ret, "Failed to set DMA Mask.\n");
+
+	/* Modeset init */
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return dev_err_probe(drm->dev, ret, "Failed to initialized mode setting.\n");
+
+	/* CRTC, Plane, Encoder */
+	ret = drm_simple_display_pipe_init(drm, &lcdc->pipe, &imx_lcdc_pipe_funcs, imx_lcdc_formats,
+					   ARRAY_SIZE(imx_lcdc_formats), NULL, &lcdc->connector);
+	if (ret < 0)
+		return dev_err_probe(drm->dev, ret, "Cannot setup simple display pipe\n");
+
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret < 0)
+		return dev_err_probe(drm->dev, ret, "Failed to initialize vblank\n");
+
+	if (lcdc->bridge) {
+		ret = drm_simple_display_pipe_attach_bridge(&lcdc->pipe,
+							    lcdc->bridge);
+		if (ret)
+			return dev_err_probe(drm->dev, ret, "Cannot connect bridge\n");
+	}
+
+	/* Connector */
+	drm_connector_helper_add(&lcdc->connector, &imx_lcdc_connector_hfuncs);
+	drm_connector_init(drm, &lcdc->connector, &imx_lcdc_connector_funcs,
+			   DRM_MODE_CONNECTOR_DPI);
+
+	/*
+	 * The LCDC controller does not have an enable bit. The
+	 * controller starts directly when the clocks are enabled.
+	 * If the clocks are enabled when the controller is not yet
+	 * programmed with proper register values (enabled at the
+	 * bootloader, for example) then it just goes into some undefined
+	 * state.
+	 * To avoid this issue, let's enable and disable LCDC IPG,
+	 * PER and AHB clock so that we force some kind of 'reset'
+	 * to the LCDC block.
+	 */
+
+	ret = clk_prepare_enable(lcdc->clk_ipg);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot enable ipg clock\n");
+	clk_disable_unprepare(lcdc->clk_ipg);
+
+	ret = clk_prepare_enable(lcdc->clk_per);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot enable per clock\n");
+	clk_disable_unprepare(lcdc->clk_per);
+
+	ret = clk_prepare_enable(lcdc->clk_ahb);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot enable ahb clock\n");
+	clk_disable_unprepare(lcdc->clk_ahb);
+
+	drm->mode_config.min_width = LCDC_MIN_XRES;
+	drm->mode_config.max_width = LCDC_MAX_XRES;
+	drm->mode_config.min_height = LCDC_MIN_YRES;
+	drm->mode_config.max_height = LCDC_MAX_YRES;
+	drm->mode_config.preferred_depth = 16;
+	drm->mode_config.funcs = &imx_lcdc_mode_config_funcs;
+	drm->mode_config.helper_private = &imx_lcdc_mode_config_helpers;
+
+	drm_mode_config_reset(drm);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		return ret;
+	}
+
+	ret = devm_request_irq(dev, irq, irq_handler, 0, "imx-lcdc", lcdc);
+	if (ret < 0)
+		return dev_err_probe(drm->dev, ret, "Failed to install IRQ handler\n");
+
+	platform_set_drvdata(pdev, drm);
+
+	ret = drm_dev_register(&lcdc->drm, 0);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot register device\n");
+
+	drm_fbdev_generic_setup(drm, 0);
+
+	return 0;
+}
+
+static int imx_lcdc_remove(struct platform_device *pdev)
+{
+	struct imx_lcdc *lcdc = drm_to_lcdc(platform_get_drvdata(pdev));
+
+	drm_dev_unregister(&lcdc->drm);
+	drm_atomic_helper_shutdown(&lcdc->drm);
+
+	return 0;
+}
+
+static void imx_lcdc_shutdown(struct platform_device *pdev)
+{
+	drm_atomic_helper_shutdown(platform_get_drvdata(pdev));
+}
+
+static struct platform_driver imx_lcdc_driver = {
+	.driver = {
+		.name = "imx-lcdc",
+		.of_match_table = imx_lcdc_of_dev_id,
+	},
+	.probe = imx_lcdc_probe,
+	.remove = imx_lcdc_remove,
+	.shutdown = imx_lcdc_shutdown,
+};
+module_platform_driver(imx_lcdc_driver);
+
+MODULE_AUTHOR("Marian Cichy <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale i.MX LCDC driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1

[PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[Uwe Kleine-König]

From: Marian Cichy <m.cichy@pengutronix.de>

Add support for the LCD Controller found on i.MX21, i.MX25 and i.MX27

Note there is already a fb driver for this hardware in the tree that is
supposed to be superseded by this one.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/gpu/drm/imx/Kconfig                 |   9 +
 drivers/gpu/drm/imx/Makefile                |   2 +
 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c | 631 ++++++++++++++++++++
 3 files changed, 642 insertions(+)
 create mode 100644 drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c

diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig
index bb9738c7c825..62b24ea1bbe0 100644
--- a/drivers/gpu/drm/imx/Kconfig
+++ b/drivers/gpu/drm/imx/Kconfig
@@ -42,3 +42,12 @@ config DRM_IMX_HDMI
 	  Choose this if you want to use HDMI on i.MX6.
 
 source "drivers/gpu/drm/imx/dcss/Kconfig"
+
+config DRM_IMX21_LCDC
+	tristate "Freescale i.MX LCDC displays"
+	depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM || COMPILE_TEST)
+	select DRM_GEM_CMA_HELPER
+	select DRM_KMS_HELPER
+	help
+	  This driver is for the Liquid Crystal Display Controller (LCDC) found
+	  on Freescale i.MX21, i.MX25 and i.MX27.
diff --git a/drivers/gpu/drm/imx/Makefile b/drivers/gpu/drm/imx/Makefile
index b644deffe948..25685230f4f7 100644
--- a/drivers/gpu/drm/imx/Makefile
+++ b/drivers/gpu/drm/imx/Makefile
@@ -10,3 +10,5 @@ obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
 
 obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
 obj-$(CONFIG_DRM_IMX_DCSS) += dcss/
+
+obj-$(CONFIG_DRM_IMX21_LCDC) += imx21-lcdc/
diff --git a/drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c b/drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c
new file mode 100644
index 000000000000..37e75f728293
--- /dev/null
+++ b/drivers/gpu/drm/imx/imx21-lcdc/imx21-lcdc.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: 2020 Marian Cichy <kernel@pengutronix.de>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <drm/drm_vblank.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/* LCDC Screen Start Address Register */
+#define IMX21LCDC_LSSAR		0x0000
+
+/* LCDC Size Register */
+#define IMX21LCDC_LSR		0x0004
+#define   IMX21LCDC_LSR_XMAX		GENMASK(25, 20) /* Screen width (in pixels) divided by 16. */
+#define   IMX21LCDC_LSR_YMAX		GENMASK(9, 0)
+
+/* LCDC Virtual Page Width Register */
+#define IMX21LCDC_LVPWR		0x0008
+
+/* LCDC Cursor Position Register */
+#define IMX21LCDC_LCPR		0x000c
+#define   IMX21LCDC_LCPR_CC		GENMASK(31, 30) /* Cursor Control */
+
+/* LCDC Cursor Width Height and Blink Register*/
+#define IMX21LCDC_LCWHB		0x0010
+
+/* LCDC Color Cursor Mapping Register */
+#define IMX21LCDC_LCCMR		0x0014
+
+/* LCDC Panel Configuration Register */
+#define IMX21LCDC_LPCR		0x0018
+#define   IMX21LCDC_LPCR_PCD		GENMASK(5, 0)
+#define   IMX21LCDC_LPCR_SHARP		BIT(6)
+#define   IMX21LCDC_LPCR_SCLKSEL	BIT(7)
+#define   IMX21LCDC_LPCR_ACD		GENMASK(14, 8)
+#define   IMX21LCDC_LPCR_ACDSEL		BIT(15)
+#define   IMX21LCDC_LPCR_REV_VS		BIT(16)
+#define   IMX21LCDC_LPCR_SWAP_SEL	BIT(17)
+#define   IMX21LCDC_LPCR_END_SEL	BIT(18)
+#define   IMX21LCDC_LPCR_SCLKIDLE	BIT(19)
+#define   IMX21LCDC_LPCR_OEPOL		BIT(20)
+#define   IMX21LCDC_LPCR_CLKPOL		BIT(21)
+#define   IMX21LCDC_LPCR_LPPOL		BIT(22)
+#define   IMX21LCDC_LPCR_FLMPOL		BIT(23)
+#define   IMX21LCDC_LPCR_PIXPOL		BIT(24)
+#define   IMX21LCDC_LPCR_BPIX		GENMASK(27, 25)
+#define   IMX21LCDC_LPCR_PBSIZ		GENMASK(29, 28)
+#define   IMX21LCDC_LPCR_COLOR		BIT(30)
+#define   IMX21LCDC_LPCR_TFT		BIT(31)
+
+/* LCDC Horizontal Configuration Register */
+#define IMX21LCDC_LHCR		0x001c
+#define   IMX21LCDC_LHCR_H_WIDTH	GENMASK(31, 26)
+#define   IMX21LCDC_LHCR_H_BPORCH	GENMASK(7, 0)
+#define   IMX21LCDC_LHCR_H_FPORCH	GENMASK(15, 8)
+
+/* LCDC Vertical Configuration Register */
+#define IMX21LCDC_LVCR		0x0020
+#define   IMX21LCDC_LVCR_V_WIDTH	GENMASK(31, 26)
+#define   IMX21LCDC_LVCR_V_BPORCH	GENMASK(7, 0)
+#define   IMX21LCDC_LVCR_V_FPORCH	GENMASK(15, 8)
+
+/* LCDC Panning Offset Register */
+#define IMX21LCDC_LPOR		0x0024
+
+/* LCDC Sharp Configuration Register */
+#define IMX21LCDC_LSCR		0x0028
+
+/* LCDC PWM Contrast Control Register */
+#define IMX21LCDC_LPCCR		0x002c
+
+/* LCDC DMA Control Register */
+#define IMX21LCDC_LDCR		0x0030
+
+/* LCDC Refresh Mode Control Register */
+#define IMX21LCDC_LRMCR		0x0034
+
+/* LCDC Interrupt Configuration Register */
+#define IMX21LCDC_LICR		0x0038
+
+/* LCDC Interrupt Enable Register */
+#define IMX21LCDC_LIER		0x003c
+#define   IMX21LCDC_LIER_EOF		BIT(1)
+
+/* LCDC Interrupt Status Register */
+#define IMX21LCDC_LISR		0x0040
+#define   IMX21LCDC_LISR_EOF		BIT(1)
+
+/* LCDC Graphic Window Start Address Register */
+#define IMX21LCDC_LGWSAR	0x0050
+
+/* LCDC Graph Window Size Register */
+#define IMX21LCDC_LGWSR		0x0054
+
+/* LCDC Graphic Window Virtual Page Width Register */
+#define IMX21LCDC_LGWVPWR	0x0058
+
+/* LCDC Graphic Window Panning Offset Register */
+#define IMX21LCDC_LGWPOR	0x005c
+
+/* LCDC Graphic Window Position Register */
+#define IMX21LCDC_LGWPR		0x0060
+
+/* LCDC Graphic Window Control Register */
+#define IMX21LCDC_LGWCR		0x0064
+
+/* LCDC Graphic Window DMA Control Register */
+#define IMX21LCDC_LGWDCR	0x0068
+
+/* LCDC AUS Mode Control Register */
+#define IMX21LCDC_LAUSCR	0x0080
+
+/* LCDC AUS Mode Cursor Control Register */
+#define IMX21LCDC_LAUSCCR	0x0084
+
+/* Background Lookup Table */
+#define IMX21LCDC_BGLUT		0x0800
+
+/* Graphic Window Lookup Table */
+#define IMX21LCDC_GWLUT		0x0c00
+
+#define BPP_RGB565 0x05
+
+#define LCDC_MIN_XRES 64
+#define LCDC_MIN_YRES 64
+
+#define LCDC_MAX_XRES 1024
+#define LCDC_MAX_YRES 1024
+
+struct imx_lcdc {
+	struct drm_device drm;
+	struct drm_simple_display_pipe pipe;
+	const struct drm_display_mode *mode;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	void __iomem *base;
+
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
+	struct clk *clk_per;
+};
+
+static const u32 imx_lcdc_formats[] = {
+	DRM_FORMAT_RGB565,
+};
+
+static inline struct imx_lcdc *drm_to_lcdc(struct drm_device *drm)
+{
+	return container_of(drm, struct imx_lcdc, drm);
+}
+
+static unsigned int imx_lcdc_get_format(unsigned int drm_format)
+{
+	unsigned int bpp;
+
+	switch (drm_format) {
+	default:
+		DRM_WARN("Format not supported - fallback to RGB565\n");
+		fallthrough;
+	case DRM_FORMAT_RGB565:
+		bpp = BPP_RGB565;
+		break;
+	}
+
+	return bpp;
+}
+
+static int imx_lcdc_connector_get_modes(struct drm_connector *connector)
+{
+	struct imx_lcdc *lcdc = drm_to_lcdc(connector->dev);
+
+	if (lcdc->panel)
+		return drm_panel_get_modes(lcdc->panel, connector);
+
+	return 0;
+}
+
+static const struct drm_connector_helper_funcs imx_lcdc_connector_hfuncs = {
+	.get_modes = imx_lcdc_connector_get_modes,
+};
+
+static const struct drm_connector_funcs imx_lcdc_connector_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
+					 struct drm_plane_state *old_state,
+					 bool mode_set)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_plane_state *new_state = pipe->plane.state;
+	struct drm_framebuffer *fb = new_state->fb;
+	struct imx_lcdc *lcdc = drm_to_lcdc(pipe->crtc.dev);
+	unsigned int bpp = imx_lcdc_get_format(fb->format->format);
+	unsigned int lvcr; /* LVCR-Register value */
+	unsigned int lhcr; /* LHCR-Register value */
+	unsigned int framesize;
+	dma_addr_t addr = drm_fb_cma_get_gem_addr(fb, new_state, 0);
+
+	/* The LSSAR register specifies the LCD screen start address (SSA). */
+	writel(addr, lcdc->base + IMX21LCDC_LSSAR);
+
+	if (!mode_set)
+		return;
+
+	/* Disable PER clock to make register write possible */
+	if (old_state && old_state->crtc && old_state->crtc->enabled)
+		clk_disable_unprepare(lcdc->clk_per);
+
+	/* Framesize */
+	framesize = FIELD_PREP(IMX21LCDC_LSR_XMAX, crtc->mode.hdisplay / 16);
+	framesize |= FIELD_PREP(IMX21LCDC_LSR_YMAX, crtc->mode.vdisplay);
+	writel(framesize, lcdc->base + IMX21LCDC_LSR);
+
+	/* HSYNC */
+	lhcr = FIELD_PREP(IMX21LCDC_LHCR_H_FPORCH, crtc->mode.hsync_start - crtc->mode.hdisplay - 1);
+	lhcr |= FIELD_PREP(IMX21LCDC_LHCR_H_WIDTH, crtc->mode.hsync_end - crtc->mode.hsync_start - 1);
+	lhcr |= FIELD_PREP(IMX21LCDC_LHCR_H_BPORCH, crtc->mode.htotal - crtc->mode.hsync_end - 3);
+	writel(lhcr, lcdc->base + IMX21LCDC_LHCR);
+
+	/* VSYNC */
+	lvcr = FIELD_PREP(IMX21LCDC_LVCR_V_FPORCH, crtc->mode.vsync_start - crtc->mode.vdisplay);
+	lvcr |= FIELD_PREP(IMX21LCDC_LVCR_V_WIDTH, crtc->mode.vsync_end - crtc->mode.vsync_start);
+	lvcr |= FIELD_PREP(IMX21LCDC_LVCR_V_BPORCH, crtc->mode.vtotal - crtc->mode.vsync_end);
+	writel(lvcr, lcdc->base + IMX21LCDC_LVCR);
+
+	writel(readl(lcdc->base + IMX21LCDC_LPCR) | FIELD_PREP(IMX21LCDC_LPCR_BPIX, bpp),
+	       lcdc->base + IMX21LCDC_LPCR);
+
+	/* Virtual Page Width */
+	writel(new_state->fb->pitches[0] / 4, lcdc->base + IMX21LCDC_LVPWR);
+
+	/* Enable PER clock */
+	if (new_state->crtc->enabled)
+		clk_prepare_enable(lcdc->clk_per);
+}
+
+static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
+				 struct drm_crtc_state *crtc_state,
+				 struct drm_plane_state *plane_state)
+{
+	int ret;
+	int clk_div;
+	int bpp;
+	struct imx_lcdc *lcdc = drm_to_lcdc(pipe->crtc.dev);
+	struct drm_display_mode *mode = &pipe->crtc.mode;
+	struct drm_display_info *disp_info = &pipe->connector->display_info;
+	const int hsync_pol = (mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : 1;
+	const int vsync_pol = (mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : 1;
+	const int data_enable_pol =
+		(disp_info->bus_flags & DRM_BUS_FLAG_DE_HIGH) ? 0 : 1;
+	const int clk_pol =
+		(disp_info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE) ? 0 : 1;
+
+	drm_panel_prepare(lcdc->panel);
+
+	clk_div = DIV_ROUND_CLOSEST_ULL(clk_get_rate(lcdc->clk_per),
+					mode->clock * 1000);
+	bpp = imx_lcdc_get_format(plane_state->fb->format->format);
+
+	writel(FIELD_PREP(IMX21LCDC_LPCR_PCD, clk_div - 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_LPPOL, hsync_pol) |
+	       FIELD_PREP(IMX21LCDC_LPCR_FLMPOL, vsync_pol) |
+	       FIELD_PREP(IMX21LCDC_LPCR_OEPOL, data_enable_pol) |
+	       FIELD_PREP(IMX21LCDC_LPCR_TFT, 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_COLOR, 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_PBSIZ, 3) |
+	       FIELD_PREP(IMX21LCDC_LPCR_BPIX, bpp) |
+	       FIELD_PREP(IMX21LCDC_LPCR_SCLKSEL, 1) |
+	       FIELD_PREP(IMX21LCDC_LPCR_PIXPOL, 0) |
+	       FIELD_PREP(IMX21LCDC_LPCR_CLKPOL, clk_pol),
+	       lcdc->base + IMX21LCDC_LPCR);
+
+	/* 0px panning offset */
+	writel(0x0, lcdc->base + IMX21LCDC_LPOR);
+
+	/* disable hardware cursor */
+	writel(readl(lcdc->base + IMX21LCDC_LCPR) & ~IMX21LCDC_LCPR_CC,
+	       lcdc->base + IMX21LCDC_LCPR);
+
+	ret = clk_prepare_enable(lcdc->clk_ipg);
+	if (ret) {
+		dev_err(pipe->crtc.dev->dev, "Cannot enable ipg clock: %pe\n", ERR_PTR(ret));
+		return;
+	}
+	ret = clk_prepare_enable(lcdc->clk_ahb);
+	if (ret) {
+		dev_err(pipe->crtc.dev->dev, "Cannot enable ahb clock: %pe\n", ERR_PTR(ret));
+		clk_disable_unprepare(lcdc->clk_ipg);
+		return;
+	}
+
+	imx_lcdc_update_hw_registers(pipe, NULL, true);
+	drm_panel_enable(lcdc->panel);
+
+	/* Enable VBLANK Interrupt */
+	writel(IMX21LCDC_LIER_EOF, lcdc->base + IMX21LCDC_LIER);
+}
+
+static void imx_lcdc_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct imx_lcdc *lcdc = drm_to_lcdc(pipe->crtc.dev);
+	struct drm_panel *panel = lcdc->panel;
+	struct drm_crtc *crtc = &lcdc->pipe.crtc;
+	struct drm_pending_vblank_event *event;
+
+	drm_panel_disable(panel);
+
+	clk_disable_unprepare(lcdc->clk_ahb);
+	clk_disable_unprepare(lcdc->clk_ipg);
+
+	if (pipe->crtc.enabled)
+		clk_disable_unprepare(lcdc->clk_per);
+
+	drm_panel_unprepare(panel);
+
+	spin_lock_irq(&lcdc->drm.event_lock);
+	event = crtc->state->event;
+	if (event) {
+		crtc->state->event = NULL;
+		drm_crtc_send_vblank_event(crtc, event);
+	}
+	spin_unlock_irq(&lcdc->drm.event_lock);
+
+	/* Disable VBLANK Interrupt */
+	writel(0, lcdc->base + IMX21LCDC_LIER);
+}
+
+static int imx_lcdc_pipe_check(struct drm_simple_display_pipe *pipe,
+			       struct drm_plane_state *plane_state,
+			       struct drm_crtc_state *crtc_state)
+{
+	const struct drm_display_mode *mode = &crtc_state->mode;
+
+	if ((mode->hdisplay < LCDC_MIN_XRES || mode->hdisplay > LCDC_MAX_XRES) ||
+	    (mode->vdisplay < LCDC_MIN_YRES || mode->vdisplay > LCDC_MAX_YRES) ||
+	    (mode->hdisplay % 16)) {
+		DRM_ERROR("unsupported display mode (%u x %u)\n",
+			  mode->hdisplay, mode->vdisplay);
+		return -EINVAL;
+	}
+
+	if (!FIELD_FIT(IMX21LCDC_LHCR_H_FPORCH, mode->hsync_start - mode->hdisplay - 1) ||
+	    !FIELD_FIT(IMX21LCDC_LHCR_H_WIDTH, mode->hsync_end - mode->hsync_start - 1) ||
+	    !FIELD_FIT(IMX21LCDC_LHCR_H_BPORCH, mode->htotal - mode->hsync_end - 3)) {
+		DRM_ERROR("invalid HSYNC setting (htotal = %hu, hsync_start = %hu, hsync_end = %hu, hdisplay = %hu)\n",
+			  mode->htotal, mode->hsync_start, mode->hsync_end, mode->hdisplay);
+		return -EINVAL;
+	}
+	if (!FIELD_FIT(IMX21LCDC_LVCR_V_FPORCH, mode->vsync_start - mode->vdisplay) ||
+	    !FIELD_FIT(IMX21LCDC_LVCR_V_WIDTH, mode->vsync_end - mode->vsync_start) ||
+	    !FIELD_FIT(IMX21LCDC_LVCR_V_BPORCH, mode->vtotal - mode->vsync_end)) {
+		DRM_ERROR("invalid VSYNC setting (vtotal = %hu, vsync_start = %hu, vsync_end = %hu, vdisplay = %hu)\n",
+			  mode->vtotal, mode->vsync_start, mode->vsync_end, mode->vdisplay);
+		return -EINVAL;
+
+	}
+
+	if (plane_state->fb->pitches[0] % 4) {
+		DRM_ERROR("invalid pitches setting (%hu)\n", plane_state->fb->pitches[0]);
+		return -EINVAL;
+	}
+
+	crtc_state->mode_changed =
+		crtc_state->mode.hdisplay != pipe->crtc.state->mode.hdisplay ||
+		crtc_state->mode.vdisplay != pipe->crtc.state->mode.vdisplay ||
+		plane_state->fb->pitches[0] != pipe->plane.state->fb->pitches[0];
+
+	return 0;
+}
+
+static void imx_lcdc_pipe_update(struct drm_simple_display_pipe *pipe,
+				 struct drm_plane_state *old_state)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_pending_vblank_event *event = crtc->state->event;
+	struct drm_plane_state *new_state = pipe->plane.state;
+	struct drm_framebuffer *fb = new_state->fb;
+	struct drm_framebuffer *old_fb = old_state->fb;
+	struct drm_crtc *old_crtc = old_state->crtc;
+	bool mode_changed = false;
+
+	if (old_fb && old_fb->format != fb->format)
+		mode_changed = true;
+	else if (old_crtc != crtc)
+		mode_changed = true;
+	else if (crtc->state->mode_changed)
+		mode_changed = true;
+
+	imx_lcdc_update_hw_registers(pipe, old_state, mode_changed);
+
+	if (event) {
+		crtc->state->event = NULL;
+
+		spin_lock_irq(&crtc->dev->event_lock);
+
+		if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
+			drm_crtc_arm_vblank_event(crtc, event);
+		else
+			drm_crtc_send_vblank_event(crtc, event);
+
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
+}
+
+static const struct drm_simple_display_pipe_funcs imx_lcdc_pipe_funcs = {
+	.enable = imx_lcdc_pipe_enable,
+	.disable = imx_lcdc_pipe_disable,
+	.check = imx_lcdc_pipe_check,
+	.update = imx_lcdc_pipe_update,
+	.prepare_fb = drm_gem_simple_display_pipe_prepare_fb,
+};
+
+static const struct drm_mode_config_funcs imx_lcdc_mode_config_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static const struct drm_mode_config_helper_funcs imx_lcdc_mode_config_helpers = {
+	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
+DEFINE_DRM_GEM_CMA_FOPS(imx_lcdc_drm_fops);
+
+static struct drm_driver imx_lcdc_drm_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.fops = &imx_lcdc_drm_fops,
+	DRM_GEM_CMA_DRIVER_OPS_VMAP,
+	.name = "imx-lcdc",
+	.desc = "i.MX LCDC driver",
+	.date = "20200716",
+};
+
+static const struct of_device_id imx_lcdc_of_dev_id[] = {
+	{ .compatible = "fsl,imx21-lcdc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_lcdc_of_dev_id);
+
+static irqreturn_t irq_handler(int irq, void *arg)
+{
+	struct imx_lcdc *lcdc = (struct imx_lcdc *)arg;
+	struct drm_crtc *crtc = &lcdc->pipe.crtc;
+	unsigned int status;
+
+	status = readl(lcdc->base + IMX21LCDC_LISR);
+
+	if (status & IMX21LCDC_LISR_EOF) {
+		drm_crtc_handle_vblank(crtc);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int imx_lcdc_probe(struct platform_device *pdev)
+{
+	struct imx_lcdc *lcdc;
+	struct drm_device *drm;
+	int irq;
+	int ret;
+	struct device *dev = &pdev->dev;
+
+	lcdc = devm_drm_dev_alloc(&pdev->dev, &imx_lcdc_drm_driver,
+				  struct imx_lcdc, drm);
+	if (!lcdc)
+		return -ENOMEM;
+
+	drm = &lcdc->drm;
+
+	lcdc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lcdc->base))
+		return PTR_ERR(lcdc->base);
+
+	/* Panel */
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &lcdc->panel, &lcdc->bridge);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to find panel or bridge\n");
+
+	/* Get Clocks */
+	lcdc->clk_ipg = devm_clk_get(dev, "ipg");
+	if (IS_ERR(lcdc->clk_ipg))
+		return dev_err_probe(dev, PTR_ERR(lcdc->clk_ipg), "Failed to get ipg clk\n");
+
+	lcdc->clk_ahb = devm_clk_get(dev, "ahb");
+	if (IS_ERR(lcdc->clk_ahb))
+		return dev_err_probe(dev, PTR_ERR(lcdc->clk_ipg), "Failed to get ahb clk\n");
+
+	lcdc->clk_per = devm_clk_get(dev, "per");
+	if (IS_ERR(lcdc->clk_per))
+		return dev_err_probe(dev, PTR_ERR(lcdc->clk_ipg), "Failed to get ahb clk\n");
+
+	ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return dev_err_probe(drm->dev, ret, "Failed to set DMA Mask.\n");
+
+	/* Modeset init */
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return dev_err_probe(drm->dev, ret, "Failed to initialized mode setting.\n");
+
+	/* CRTC, Plane, Encoder */
+	ret = drm_simple_display_pipe_init(drm, &lcdc->pipe, &imx_lcdc_pipe_funcs, imx_lcdc_formats,
+					   ARRAY_SIZE(imx_lcdc_formats), NULL, &lcdc->connector);
+	if (ret < 0)
+		return dev_err_probe(drm->dev, ret, "Cannot setup simple display pipe\n");
+
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret < 0)
+		return dev_err_probe(drm->dev, ret, "Failed to initialize vblank\n");
+
+	if (lcdc->bridge) {
+		ret = drm_simple_display_pipe_attach_bridge(&lcdc->pipe,
+							    lcdc->bridge);
+		if (ret)
+			return dev_err_probe(drm->dev, ret, "Cannot connect bridge\n");
+	}
+
+	/* Connector */
+	drm_connector_helper_add(&lcdc->connector, &imx_lcdc_connector_hfuncs);
+	drm_connector_init(drm, &lcdc->connector, &imx_lcdc_connector_funcs,
+			   DRM_MODE_CONNECTOR_DPI);
+
+	/*
+	 * The LCDC controller does not have an enable bit. The
+	 * controller starts directly when the clocks are enabled.
+	 * If the clocks are enabled when the controller is not yet
+	 * programmed with proper register values (enabled at the
+	 * bootloader, for example) then it just goes into some undefined
+	 * state.
+	 * To avoid this issue, let's enable and disable LCDC IPG,
+	 * PER and AHB clock so that we force some kind of 'reset'
+	 * to the LCDC block.
+	 */
+
+	ret = clk_prepare_enable(lcdc->clk_ipg);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot enable ipg clock\n");
+	clk_disable_unprepare(lcdc->clk_ipg);
+
+	ret = clk_prepare_enable(lcdc->clk_per);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot enable per clock\n");
+	clk_disable_unprepare(lcdc->clk_per);
+
+	ret = clk_prepare_enable(lcdc->clk_ahb);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot enable ahb clock\n");
+	clk_disable_unprepare(lcdc->clk_ahb);
+
+	drm->mode_config.min_width = LCDC_MIN_XRES;
+	drm->mode_config.max_width = LCDC_MAX_XRES;
+	drm->mode_config.min_height = LCDC_MIN_YRES;
+	drm->mode_config.max_height = LCDC_MAX_YRES;
+	drm->mode_config.preferred_depth = 16;
+	drm->mode_config.funcs = &imx_lcdc_mode_config_funcs;
+	drm->mode_config.helper_private = &imx_lcdc_mode_config_helpers;
+
+	drm_mode_config_reset(drm);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		return ret;
+	}
+
+	ret = devm_request_irq(dev, irq, irq_handler, 0, "imx-lcdc", lcdc);
+	if (ret < 0)
+		return dev_err_probe(drm->dev, ret, "Failed to install IRQ handler\n");
+
+	platform_set_drvdata(pdev, drm);
+
+	ret = drm_dev_register(&lcdc->drm, 0);
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot register device\n");
+
+	drm_fbdev_generic_setup(drm, 0);
+
+	return 0;
+}
+
+static int imx_lcdc_remove(struct platform_device *pdev)
+{
+	struct imx_lcdc *lcdc = drm_to_lcdc(platform_get_drvdata(pdev));
+
+	drm_dev_unregister(&lcdc->drm);
+	drm_atomic_helper_shutdown(&lcdc->drm);
+
+	return 0;
+}
+
+static void imx_lcdc_shutdown(struct platform_device *pdev)
+{
+	drm_atomic_helper_shutdown(platform_get_drvdata(pdev));
+}
+
+static struct platform_driver imx_lcdc_driver = {
+	.driver = {
+		.name = "imx-lcdc",
+		.of_match_table = imx_lcdc_of_dev_id,
+	},
+	.probe = imx_lcdc_probe,
+	.remove = imx_lcdc_remove,
+	.shutdown = imx_lcdc_shutdown,
+};
+module_platform_driver(imx_lcdc_driver);
+
+MODULE_AUTHOR("Marian Cichy <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale i.MX LCDC driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[kernel test robot]

Hi "Uwe,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: riscv-allyesconfig (https://download.01.org/0day-ci/archive/20220129/202201290246.pin2pNs4-lkp@intel.com/config)
compiler: riscv64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
        git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=riscv SHELL=/bin/bash

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> scripts/Makefile.build:44: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
>> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[6]: Failed to remake makefile 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.


vim +44 scripts/Makefile.build

20a468b51325b3 Sam Ravnborg   2006-01-22  40  
2a691470345a00 Sam Ravnborg   2005-07-25  41  # The filename Kbuild has precedence over Makefile
db8c1a7b2ca25f Sam Ravnborg   2005-07-27  42  kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
0c53c8e6eb456c Sam Ravnborg   2007-10-14  43  kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
0c53c8e6eb456c Sam Ravnborg   2007-10-14 @44  include $(kbuild-file)
^1da177e4c3f41 Linus Torvalds 2005-04-16  45  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2559 bytes --]

Hi "Uwe,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: riscv-allyesconfig (https://download.01.org/0day-ci/archive/20220129/202201290246.pin2pNs4-lkp(a)intel.com/config)
compiler: riscv64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
        git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=riscv SHELL=/bin/bash

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> scripts/Makefile.build:44: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
>> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[6]: Failed to remake makefile 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.


vim +44 scripts/Makefile.build

20a468b51325b3 Sam Ravnborg   2006-01-22  40  
2a691470345a00 Sam Ravnborg   2005-07-25  41  # The filename Kbuild has precedence over Makefile
db8c1a7b2ca25f Sam Ravnborg   2005-07-27  42  kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
0c53c8e6eb456c Sam Ravnborg   2007-10-14  43  kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
0c53c8e6eb456c Sam Ravnborg   2007-10-14 @44  include $(kbuild-file)
^1da177e4c3f41 Linus Torvalds 2005-04-16  45  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[kernel test robot]

Hi "Uwe,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: riscv-allyesconfig (https://download.01.org/0day-ci/archive/20220129/202201290246.pin2pNs4-lkp@intel.com/config)
compiler: riscv64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
        git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=riscv SHELL=/bin/bash

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> scripts/Makefile.build:44: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
>> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[6]: Failed to remake makefile 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.


vim +44 scripts/Makefile.build

20a468b51325b3 Sam Ravnborg   2006-01-22  40  
2a691470345a00 Sam Ravnborg   2005-07-25  41  # The filename Kbuild has precedence over Makefile
db8c1a7b2ca25f Sam Ravnborg   2005-07-27  42  kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
0c53c8e6eb456c Sam Ravnborg   2007-10-14  43  kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
0c53c8e6eb456c Sam Ravnborg   2007-10-14 @44  include $(kbuild-file)
^1da177e4c3f41 Linus Torvalds 2005-04-16  45  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[kernel test robot]

Hi "Uwe,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: arc-randconfig-r012-20220128 (https://download.01.org/0day-ci/archive/20220129/202201290646.48sNgWm1-lkp@intel.com/config)
compiler: arc-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
        git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc distclean

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> scripts/Makefile.clean:15: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
>> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[6]: Failed to remake makefile 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[5]: *** [scripts/Makefile.clean:68: drivers/gpu/drm/imx/imx21-lcdc] Error 2
   make[5]: Target '__clean' not remade because of errors.
   make[4]: *** [scripts/Makefile.clean:68: drivers/gpu/drm/imx] Error 2
   make[4]: Target '__clean' not remade because of errors.
   make[3]: *** [scripts/Makefile.clean:68: drivers/gpu/drm] Error 2
   make[3]: Target '__clean' not remade because of errors.
   make[2]: *** [scripts/Makefile.clean:68: drivers/gpu] Error 2
   make[2]: Target '__clean' not remade because of errors.
   make[1]: *** [Makefile:1838: _clean_drivers] Error 2
   make[1]: Target 'distclean' not remade because of errors.
   make: *** [Makefile:219: __sub-make] Error 2
   make: Target 'distclean' not remade because of errors.


vim +15 scripts/Makefile.clean

2315c6e4227815 Sam Ravnborg   2005-07-25  12  
2a691470345a00 Sam Ravnborg   2005-07-25  13  # The filename Kbuild has precedence over Makefile
db8c1a7b2ca25f Sam Ravnborg   2005-07-27  14  kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
db8c1a7b2ca25f Sam Ravnborg   2005-07-27 @15  include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
^1da177e4c3f41 Linus Torvalds 2005-04-16  16  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3242 bytes --]

Hi "Uwe,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: arc-randconfig-r012-20220128 (https://download.01.org/0day-ci/archive/20220129/202201290646.48sNgWm1-lkp(a)intel.com/config)
compiler: arc-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
        git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc distclean

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> scripts/Makefile.clean:15: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
>> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[6]: Failed to remake makefile 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[5]: *** [scripts/Makefile.clean:68: drivers/gpu/drm/imx/imx21-lcdc] Error 2
   make[5]: Target '__clean' not remade because of errors.
   make[4]: *** [scripts/Makefile.clean:68: drivers/gpu/drm/imx] Error 2
   make[4]: Target '__clean' not remade because of errors.
   make[3]: *** [scripts/Makefile.clean:68: drivers/gpu/drm] Error 2
   make[3]: Target '__clean' not remade because of errors.
   make[2]: *** [scripts/Makefile.clean:68: drivers/gpu] Error 2
   make[2]: Target '__clean' not remade because of errors.
   make[1]: *** [Makefile:1838: _clean_drivers] Error 2
   make[1]: Target 'distclean' not remade because of errors.
   make: *** [Makefile:219: __sub-make] Error 2
   make: Target 'distclean' not remade because of errors.


vim +15 scripts/Makefile.clean

2315c6e4227815 Sam Ravnborg   2005-07-25  12  
2a691470345a00 Sam Ravnborg   2005-07-25  13  # The filename Kbuild has precedence over Makefile
db8c1a7b2ca25f Sam Ravnborg   2005-07-27  14  kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
db8c1a7b2ca25f Sam Ravnborg   2005-07-27 @15  include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
^1da177e4c3f41 Linus Torvalds 2005-04-16  16  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[kernel test robot]

Hi "Uwe,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: arc-randconfig-r012-20220128 (https://download.01.org/0day-ci/archive/20220129/202201290646.48sNgWm1-lkp@intel.com/config)
compiler: arc-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
        git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
        # save the config file to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc distclean

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> scripts/Makefile.clean:15: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
>> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[6]: Failed to remake makefile 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.
   make[5]: *** [scripts/Makefile.clean:68: drivers/gpu/drm/imx/imx21-lcdc] Error 2
   make[5]: Target '__clean' not remade because of errors.
   make[4]: *** [scripts/Makefile.clean:68: drivers/gpu/drm/imx] Error 2
   make[4]: Target '__clean' not remade because of errors.
   make[3]: *** [scripts/Makefile.clean:68: drivers/gpu/drm] Error 2
   make[3]: Target '__clean' not remade because of errors.
   make[2]: *** [scripts/Makefile.clean:68: drivers/gpu] Error 2
   make[2]: Target '__clean' not remade because of errors.
   make[1]: *** [Makefile:1838: _clean_drivers] Error 2
   make[1]: Target 'distclean' not remade because of errors.
   make: *** [Makefile:219: __sub-make] Error 2
   make: Target 'distclean' not remade because of errors.


vim +15 scripts/Makefile.clean

2315c6e4227815 Sam Ravnborg   2005-07-25  12  
2a691470345a00 Sam Ravnborg   2005-07-25  13  # The filename Kbuild has precedence over Makefile
db8c1a7b2ca25f Sam Ravnborg   2005-07-27  14  kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
db8c1a7b2ca25f Sam Ravnborg   2005-07-27 @15  include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
^1da177e4c3f41 Linus Torvalds 2005-04-16  16  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 2309 bytes --]

On Sat, Jan 29, 2022 at 06:25:53AM +0800, kernel test robot wrote:
> Hi "Uwe,
> 
> Thank you for the patch! Yet something to improve:
> 
> [auto build test ERROR on shawnguo/for-next]
> [also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
> 
> url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
> config: arc-randconfig-r012-20220128 (https://download.01.org/0day-ci/archive/20220129/202201290646.48sNgWm1-lkp@intel.com/config)
> compiler: arc-elf-gcc (GCC) 11.2.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
>         git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
>         # save the config file to linux build tree
>         mkdir build_dir
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc distclean
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All errors (new ones prefixed by >>):
> 
> >> scripts/Makefile.clean:15: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
> >> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.

Argh, yes, I forgot to commit that one. I'll add it in the next round,
but wait a bit for more feedback (mainly by Rob). The Makefile just
contains:

	obj-$(CONFIG_DRM_IMX21_LCDC) += imx21-lcdc.o

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 2312 bytes --]

On Sat, Jan 29, 2022 at 06:25:53AM +0800, kernel test robot wrote:
> Hi "Uwe,
> 
> Thank you for the patch! Yet something to improve:
> 
> [auto build test ERROR on shawnguo/for-next]
> [also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
> 
> url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
> config: arc-randconfig-r012-20220128 (https://download.01.org/0day-ci/archive/20220129/202201290646.48sNgWm1-lkp(a)intel.com/config)
> compiler: arc-elf-gcc (GCC) 11.2.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
>         git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
>         # save the config file to linux build tree
>         mkdir build_dir
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc distclean
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All errors (new ones prefixed by >>):
> 
> >> scripts/Makefile.clean:15: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
> >> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.

Argh, yes, I forgot to commit that one. I'll add it in the next round,
but wait a bit for more feedback (mainly by Rob). The Makefile just
contains:

	obj-$(CONFIG_DRM_IMX21_LCDC) += imx21-lcdc.o

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 2/2] drm/imx/lcdc: Implement DRM driver for imx21

[Uwe Kleine-König]

[-- Attachment #1.1: Type: text/plain, Size: 2309 bytes --]

On Sat, Jan 29, 2022 at 06:25:53AM +0800, kernel test robot wrote:
> Hi "Uwe,
> 
> Thank you for the patch! Yet something to improve:
> 
> [auto build test ERROR on shawnguo/for-next]
> [also build test ERROR on robh/for-next pza/reset/next v5.17-rc1 next-20220128]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
> 
> url:    https://github.com/0day-ci/linux/commits/Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
> config: arc-randconfig-r012-20220128 (https://download.01.org/0day-ci/archive/20220129/202201290646.48sNgWm1-lkp@intel.com/config)
> compiler: arc-elf-gcc (GCC) 11.2.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/cba99931972f752a7b3105a3697b0cda88fe54d4
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Uwe-Kleine-K-nig/drm-imx-lcdc-drm-driver-for-imx21-25-27/20220128-190002
>         git checkout cba99931972f752a7b3105a3697b0cda88fe54d4
>         # save the config file to linux build tree
>         mkdir build_dir
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc distclean
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All errors (new ones prefixed by >>):
> 
> >> scripts/Makefile.clean:15: drivers/gpu/drm/imx/imx21-lcdc/Makefile: No such file or directory
> >> make[6]: *** No rule to make target 'drivers/gpu/drm/imx/imx21-lcdc/Makefile'.

Argh, yes, I forgot to commit that one. I'll add it in the next round,
but wait a bit for more feedback (mainly by Rob). The Makefile just
contains:

	obj-$(CONFIG_DRM_IMX21_LCDC) += imx21-lcdc.o

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel