[PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7822705ad16c..7abf113c966c 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -19,6 +19,9 @@ description: |
   is active since power-on and does not need any clock gating and is usable
   as very early serial console.
 
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -69,7 +72,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1

[PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7822705ad16c..7abf113c966c 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -19,6 +19,9 @@ description: |
   is active since power-on and does not need any clock gating and is usable
   as very early serial console.
 
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -69,7 +72,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7822705ad16c..7abf113c966c 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -19,6 +19,9 @@ description: |
   is active since power-on and does not need any clock gating and is usable
   as very early serial console.
 
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -69,7 +72,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7822705ad16c..7abf113c966c 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -19,6 +19,9 @@ description: |
   is active since power-on and does not need any clock gating and is usable
   as very early serial console.
 
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -69,7 +72,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 02/13] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible

[Krzysztof Kozlowski]

Nuvoton NPCM850 UART is compatible with NPCM750, so add proper fallback
to match existing DTS and Linux driver.

Fixes: c8177f90b7c6 ("dt-bindings: serial: 8250: Add npcm845 compatible string")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 34b8e59aa9d4..badaf6d5b6fe 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -62,7 +62,6 @@ properties:
       - const: mrvl,pxa-uart
       - const: nuvoton,wpcm450-uart
       - const: nuvoton,npcm750-uart
-      - const: nuvoton,npcm845-uart
       - const: nvidia,tegra20-uart
       - const: nxp,lpc3220-uart
       - items:
@@ -92,6 +91,10 @@ properties:
           - enum:
               - ns16550 # Deprecated, unless the FIFO really is broken
               - ns16550a
+      - items:
+          - enum:
+              - nuvoton,npcm845-uart
+          - const: nuvoton,npcm750-uart
       - items:
           - enum:
               - ralink,mt7620a-uart
-- 
2.34.1

[PATCH 02/13] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible

[Krzysztof Kozlowski]

Nuvoton NPCM850 UART is compatible with NPCM750, so add proper fallback
to match existing DTS and Linux driver.

Fixes: c8177f90b7c6 ("dt-bindings: serial: 8250: Add npcm845 compatible string")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 34b8e59aa9d4..badaf6d5b6fe 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -62,7 +62,6 @@ properties:
       - const: mrvl,pxa-uart
       - const: nuvoton,wpcm450-uart
       - const: nuvoton,npcm750-uart
-      - const: nuvoton,npcm845-uart
       - const: nvidia,tegra20-uart
       - const: nxp,lpc3220-uart
       - items:
@@ -92,6 +91,10 @@ properties:
           - enum:
               - ns16550 # Deprecated, unless the FIFO really is broken
               - ns16550a
+      - items:
+          - enum:
+              - nuvoton,npcm845-uart
+          - const: nuvoton,npcm750-uart
       - items:
           - enum:
               - ralink,mt7620a-uart
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 02/13] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible

[Krzysztof Kozlowski]

Nuvoton NPCM850 UART is compatible with NPCM750, so add proper fallback
to match existing DTS and Linux driver.

Fixes: c8177f90b7c6 ("dt-bindings: serial: 8250: Add npcm845 compatible string")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 34b8e59aa9d4..badaf6d5b6fe 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -62,7 +62,6 @@ properties:
       - const: mrvl,pxa-uart
       - const: nuvoton,wpcm450-uart
       - const: nuvoton,npcm750-uart
-      - const: nuvoton,npcm845-uart
       - const: nvidia,tegra20-uart
       - const: nxp,lpc3220-uart
       - items:
@@ -92,6 +91,10 @@ properties:
           - enum:
               - ns16550 # Deprecated, unless the FIFO really is broken
               - ns16550a
+      - items:
+          - enum:
+              - nuvoton,npcm845-uart
+          - const: nuvoton,npcm750-uart
       - items:
           - enum:
               - ralink,mt7620a-uart
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 02/13] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible

[Krzysztof Kozlowski]

Nuvoton NPCM850 UART is compatible with NPCM750, so add proper fallback
to match existing DTS and Linux driver.

Fixes: c8177f90b7c6 ("dt-bindings: serial: 8250: Add npcm845 compatible string")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 34b8e59aa9d4..badaf6d5b6fe 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -62,7 +62,6 @@ properties:
       - const: mrvl,pxa-uart
       - const: nuvoton,wpcm450-uart
       - const: nuvoton,npcm750-uart
-      - const: nuvoton,npcm845-uart
       - const: nvidia,tegra20-uart
       - const: nxp,lpc3220-uart
       - items:
@@ -92,6 +91,10 @@ properties:
           - enum:
               - ns16550 # Deprecated, unless the FIFO really is broken
               - ns16550a
+      - items:
+          - enum:
+              - nuvoton,npcm845-uart
+          - const: nuvoton,npcm750-uart
       - items:
           - enum:
               - ralink,mt7620a-uart
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 03/13] dt-bindings: serial: pl011: allow ARM Primecell properties

[Krzysztof Kozlowski]

Reference ARM Primecell bindings to allow typical Primecell device node properties:

  broadcom/bcm2711-rpi-400.dtb: serial@7e201000: Unevaluated properties are not allowed ('arm,primecell-periphid' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/pl011.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 80af72859876..9571041030b7 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -10,6 +10,7 @@ maintainers:
   - Rob Herring <robh@kernel.org>
 
 allOf:
+  - $ref: /schemas/arm/primecell.yaml#
   - $ref: serial.yaml#
 
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
-- 
2.34.1

[PATCH 03/13] dt-bindings: serial: pl011: allow ARM Primecell properties

[Krzysztof Kozlowski]

Reference ARM Primecell bindings to allow typical Primecell device node properties:

  broadcom/bcm2711-rpi-400.dtb: serial@7e201000: Unevaluated properties are not allowed ('arm,primecell-periphid' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/pl011.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 80af72859876..9571041030b7 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -10,6 +10,7 @@ maintainers:
   - Rob Herring <robh@kernel.org>
 
 allOf:
+  - $ref: /schemas/arm/primecell.yaml#
   - $ref: serial.yaml#
 
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 03/13] dt-bindings: serial: pl011: allow ARM Primecell properties

[Krzysztof Kozlowski]

Reference ARM Primecell bindings to allow typical Primecell device node properties:

  broadcom/bcm2711-rpi-400.dtb: serial@7e201000: Unevaluated properties are not allowed ('arm,primecell-periphid' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/pl011.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 80af72859876..9571041030b7 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -10,6 +10,7 @@ maintainers:
   - Rob Herring <robh@kernel.org>
 
 allOf:
+  - $ref: /schemas/arm/primecell.yaml#
   - $ref: serial.yaml#
 
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 03/13] dt-bindings: serial: pl011: allow ARM Primecell properties

[Krzysztof Kozlowski]

Reference ARM Primecell bindings to allow typical Primecell device node properties:

  broadcom/bcm2711-rpi-400.dtb: serial@7e201000: Unevaluated properties are not allowed ('arm,primecell-periphid' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/pl011.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 80af72859876..9571041030b7 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -10,6 +10,7 @@ maintainers:
   - Rob Herring <robh@kernel.org>
 
 allOf:
+  - $ref: /schemas/arm/primecell.yaml#
   - $ref: serial.yaml#
 
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Krzysztof Kozlowski]

The serial bindings should reference the local (in kernel) serial.yaml,
not the /schemas/serial.yaml.  The latter comes from dtschema package
and is a small subset of serial bindings.

Usage of the local serial.yaml allows typical properties and children:

  xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
 Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 876b8cf1cafb..0c118d5336cc 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 2f4390e8d4e8..6f65e9a81c29 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -63,7 +63,7 @@ required:
   - xlnx,use-parity
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
   - if:
       properties:
         xlnx,use-parity:
-- 
2.34.1

[PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Krzysztof Kozlowski]

The serial bindings should reference the local (in kernel) serial.yaml,
not the /schemas/serial.yaml.  The latter comes from dtschema package
and is a small subset of serial bindings.

Usage of the local serial.yaml allows typical properties and children:

  xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
 Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 876b8cf1cafb..0c118d5336cc 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 2f4390e8d4e8..6f65e9a81c29 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -63,7 +63,7 @@ required:
   - xlnx,use-parity
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
   - if:
       properties:
         xlnx,use-parity:
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Krzysztof Kozlowski]

The serial bindings should reference the local (in kernel) serial.yaml,
not the /schemas/serial.yaml.  The latter comes from dtschema package
and is a small subset of serial bindings.

Usage of the local serial.yaml allows typical properties and children:

  xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
 Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 876b8cf1cafb..0c118d5336cc 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 2f4390e8d4e8..6f65e9a81c29 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -63,7 +63,7 @@ required:
   - xlnx,use-parity
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
   - if:
       properties:
         xlnx,use-parity:
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Krzysztof Kozlowski]

The serial bindings should reference the local (in kernel) serial.yaml,
not the /schemas/serial.yaml.  The latter comes from dtschema package
and is a small subset of serial bindings.

Usage of the local serial.yaml allows typical properties and children:

  xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
 Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 876b8cf1cafb..0c118d5336cc 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 2f4390e8d4e8..6f65e9a81c29 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -63,7 +63,7 @@ required:
   - xlnx,use-parity
 
 allOf:
-  - $ref: /schemas/serial.yaml#
+  - $ref: serial.yaml#
   - if:
       properties:
         xlnx,use-parity:
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

Few Xilinx DTS have power domains in serial node:

  zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 0c118d5336cc..38925b79cb38 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -9,9 +9,6 @@ title: Cadence UART Controller
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
-allOf:
-  - $ref: serial.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -46,6 +43,9 @@ properties:
       port does not use this pin.
     type: boolean
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -53,6 +53,17 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cdns,uart-r1p8
+    then:
+      properties:
+        power-domains: false
+
 unevaluatedProperties: false
 
 examples:
-- 
2.34.1

[PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

Few Xilinx DTS have power domains in serial node:

  zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 0c118d5336cc..38925b79cb38 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -9,9 +9,6 @@ title: Cadence UART Controller
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
-allOf:
-  - $ref: serial.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -46,6 +43,9 @@ properties:
       port does not use this pin.
     type: boolean
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -53,6 +53,17 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cdns,uart-r1p8
+    then:
+      properties:
+        power-domains: false
+
 unevaluatedProperties: false
 
 examples:
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

Few Xilinx DTS have power domains in serial node:

  zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 0c118d5336cc..38925b79cb38 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -9,9 +9,6 @@ title: Cadence UART Controller
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
-allOf:
-  - $ref: serial.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -46,6 +43,9 @@ properties:
       port does not use this pin.
     type: boolean
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -53,6 +53,17 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cdns,uart-r1p8
+    then:
+      properties:
+        power-domains: false
+
 unevaluatedProperties: false
 
 examples:
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

Few Xilinx DTS have power domains in serial node:

  zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 0c118d5336cc..38925b79cb38 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -9,9 +9,6 @@ title: Cadence UART Controller
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
-allOf:
-  - $ref: serial.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -46,6 +43,9 @@ properties:
       port does not use this pin.
     type: boolean
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -53,6 +53,17 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cdns,uart-r1p8
+    then:
+      properties:
+        power-domains: false
+
 unevaluatedProperties: false
 
 examples:
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 06/13] dt-bindings: serial: 8250_omap: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250_omap.yaml | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 53dc1212ad2e..7db8e5477b03 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,11 +70,6 @@ properties:
   dsr-gpios: true
   rng-gpios: true
   dcd-gpios: true
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  rs485-rts-active-high: true
-  linux,rs485-enabled-at-boot-time: true
   rts-gpio: true
   power-domains: true
   clock-frequency: true
-- 
2.34.1

[PATCH 06/13] dt-bindings: serial: 8250_omap: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250_omap.yaml | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 53dc1212ad2e..7db8e5477b03 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,11 +70,6 @@ properties:
   dsr-gpios: true
   rng-gpios: true
   dcd-gpios: true
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  rs485-rts-active-high: true
-  linux,rs485-enabled-at-boot-time: true
   rts-gpio: true
   power-domains: true
   clock-frequency: true
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 06/13] dt-bindings: serial: 8250_omap: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250_omap.yaml | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 53dc1212ad2e..7db8e5477b03 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,11 +70,6 @@ properties:
   dsr-gpios: true
   rng-gpios: true
   dcd-gpios: true
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  rs485-rts-active-high: true
-  linux,rs485-enabled-at-boot-time: true
   rts-gpio: true
   power-domains: true
   clock-frequency: true
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 06/13] dt-bindings: serial: 8250_omap: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250_omap.yaml | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 53dc1212ad2e..7db8e5477b03 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,11 +70,6 @@ properties:
   dsr-gpios: true
   rng-gpios: true
   dcd-gpios: true
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  rs485-rts-active-high: true
-  linux,rs485-enabled-at-boot-time: true
   rts-gpio: true
   power-domains: true
   clock-frequency: true
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 07/13] dt-bindings: serial: fsl-imx-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index 9d949296a142..b431a0d1cd6b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -83,13 +83,6 @@ properties:
       are sensible for most use cases. If you need low latency processing on
       slow connections this needs to be configured appropriately.
 
-  uart-has-rtscts: true
-
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1

[PATCH 07/13] dt-bindings: serial: fsl-imx-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index 9d949296a142..b431a0d1cd6b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -83,13 +83,6 @@ properties:
       are sensible for most use cases. If you need low latency processing on
       slow connections this needs to be configured appropriately.
 
-  uart-has-rtscts: true
-
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 07/13] dt-bindings: serial: fsl-imx-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index 9d949296a142..b431a0d1cd6b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -83,13 +83,6 @@ properties:
       are sensible for most use cases. If you need low latency processing on
       slow connections this needs to be configured appropriately.
 
-  uart-has-rtscts: true
-
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 07/13] dt-bindings: serial: fsl-imx-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index 9d949296a142..b431a0d1cd6b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -83,13 +83,6 @@ properties:
       are sensible for most use cases. If you need low latency processing on
       slow connections this needs to be configured appropriately.
 
-  uart-has-rtscts: true
-
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  rs485-rx-during-tx: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 08/13] dt-bindings: serial: fsl-lpuart: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 74f75f669e77..b1e81a6451a6 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -64,9 +64,6 @@ properties:
       - const: rx
       - const: tx
 
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1

[PATCH 08/13] dt-bindings: serial: fsl-lpuart: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 74f75f669e77..b1e81a6451a6 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -64,9 +64,6 @@ properties:
       - const: rx
       - const: tx
 
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 08/13] dt-bindings: serial: fsl-lpuart: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 74f75f669e77..b1e81a6451a6 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -64,9 +64,6 @@ properties:
       - const: rx
       - const: tx
 
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 08/13] dt-bindings: serial: fsl-lpuart: drop rs485 properties

[Krzysztof Kozlowski]

The binding references rs485 schema, so there is no need to list its
properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 74f75f669e77..b1e81a6451a6 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -64,9 +64,6 @@ properties:
       - const: rx
       - const: tx
 
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-
 required:
   - compatible
   - reg
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 09/13] dt-bindings: serial: fsl-lpuart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  imx8qxp-ai_ml.dtb: serial@5a060000: Unevaluated properties are not allowed ('uart-has-rtscts' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index b1e81a6451a6..26c3593fa98b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1

[PATCH 09/13] dt-bindings: serial: fsl-lpuart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  imx8qxp-ai_ml.dtb: serial@5a060000: Unevaluated properties are not allowed ('uart-has-rtscts' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index b1e81a6451a6..26c3593fa98b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 09/13] dt-bindings: serial: fsl-lpuart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  imx8qxp-ai_ml.dtb: serial@5a060000: Unevaluated properties are not allowed ('uart-has-rtscts' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index b1e81a6451a6..26c3593fa98b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 09/13] dt-bindings: serial: fsl-lpuart: allow other serial properties

[Krzysztof Kozlowski]

Reference common serial properties bindings to allow typical serial
properties:

  imx8qxp-ai_ml.dtb: serial@5a060000: Unevaluated properties are not allowed ('uart-has-rtscts' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index b1e81a6451a6..26c3593fa98b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 10/13] dt-bindings: serial: st,stm32-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/st,stm32-uart.yaml          | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 85876c668f6d..1df8ffe95fc6 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -35,8 +35,6 @@ properties:
     description: enable hardware flow control (deprecated)
     $ref: /schemas/types.yaml#/definitions/flag
 
-  uart-has-rtscts: true
-
   rx-tx-swap: true
 
   dmas:
@@ -60,11 +58,6 @@ properties:
 
   wakeup-source: true
 
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-  rs485-rx-during-tx: true
-
   rx-threshold:
     description:
       If value is set to 1, RX FIFO threshold is disabled.
-- 
2.34.1

[PATCH 10/13] dt-bindings: serial: st,stm32-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/st,stm32-uart.yaml          | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 85876c668f6d..1df8ffe95fc6 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -35,8 +35,6 @@ properties:
     description: enable hardware flow control (deprecated)
     $ref: /schemas/types.yaml#/definitions/flag
 
-  uart-has-rtscts: true
-
   rx-tx-swap: true
 
   dmas:
@@ -60,11 +58,6 @@ properties:
 
   wakeup-source: true
 
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-  rs485-rx-during-tx: true
-
   rx-threshold:
     description:
       If value is set to 1, RX FIFO threshold is disabled.
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 10/13] dt-bindings: serial: st,stm32-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/st,stm32-uart.yaml          | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 85876c668f6d..1df8ffe95fc6 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -35,8 +35,6 @@ properties:
     description: enable hardware flow control (deprecated)
     $ref: /schemas/types.yaml#/definitions/flag
 
-  uart-has-rtscts: true
-
   rx-tx-swap: true
 
   dmas:
@@ -60,11 +58,6 @@ properties:
 
   wakeup-source: true
 
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-  rs485-rx-during-tx: true
-
   rx-threshold:
     description:
       If value is set to 1, RX FIFO threshold is disabled.
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 10/13] dt-bindings: serial: st,stm32-uart: drop common properties

[Krzysztof Kozlowski]

The binding references serial and rs485 schemas, so there is no need to
list their properties.  Simplify a bit by removing unneeded entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/st,stm32-uart.yaml          | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 85876c668f6d..1df8ffe95fc6 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -35,8 +35,6 @@ properties:
     description: enable hardware flow control (deprecated)
     $ref: /schemas/types.yaml#/definitions/flag
 
-  uart-has-rtscts: true
-
   rx-tx-swap: true
 
   dmas:
@@ -60,11 +58,6 @@ properties:
 
   wakeup-source: true
 
-  rs485-rts-delay: true
-  rs485-rts-active-low: true
-  linux,rs485-enabled-at-boot-time: true
-  rs485-rx-during-tx: true
-
   rx-threshold:
     description:
       If value is set to 1, RX FIFO threshold is disabled.
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

The re-usable serial.yaml schema matches every property with ".*"
pattern, thus any other schema referencing it will not report unknown
(unevaluated) properties.  This hides several wrong properties.  It is
a limitation of dtschema, thus provide a simple workaround: expect
children to be only of few names matching upstream usage (Bluetooth,
GNSS, GPS and MCU).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 11e822bf09e2..21992e9a3c2b 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -96,7 +96,7 @@ then:
     rts-gpios: false
 
 patternProperties:
-  ".*":
+  "^bluetooth|gnss|gps|mcu$":
     if:
       type: object
     then:
-- 
2.34.1

[PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

The re-usable serial.yaml schema matches every property with ".*"
pattern, thus any other schema referencing it will not report unknown
(unevaluated) properties.  This hides several wrong properties.  It is
a limitation of dtschema, thus provide a simple workaround: expect
children to be only of few names matching upstream usage (Bluetooth,
GNSS, GPS and MCU).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 11e822bf09e2..21992e9a3c2b 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -96,7 +96,7 @@ then:
     rts-gpios: false
 
 patternProperties:
-  ".*":
+  "^bluetooth|gnss|gps|mcu$":
     if:
       type: object
     then:
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

The re-usable serial.yaml schema matches every property with ".*"
pattern, thus any other schema referencing it will not report unknown
(unevaluated) properties.  This hides several wrong properties.  It is
a limitation of dtschema, thus provide a simple workaround: expect
children to be only of few names matching upstream usage (Bluetooth,
GNSS, GPS and MCU).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 11e822bf09e2..21992e9a3c2b 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -96,7 +96,7 @@ then:
     rts-gpios: false
 
 patternProperties:
-  ".*":
+  "^bluetooth|gnss|gps|mcu$":
     if:
       type: object
     then:
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

The re-usable serial.yaml schema matches every property with ".*"
pattern, thus any other schema referencing it will not report unknown
(unevaluated) properties.  This hides several wrong properties.  It is
a limitation of dtschema, thus provide a simple workaround: expect
children to be only of few names matching upstream usage (Bluetooth,
GNSS, GPS and MCU).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 11e822bf09e2..21992e9a3c2b 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -96,7 +96,7 @@ then:
     rts-gpios: false
 
 patternProperties:
-  ".*":
+  "^bluetooth|gnss|gps|mcu$":
     if:
       type: object
     then:
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 12/13] dt-bindings: serial: drop unneeded quotes

[Krzysztof Kozlowski]

Cleanup by removing unneeded quotes from refs.  No functional impact
except adjusting to preferred coding style.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml            | 4 ++--
 .../devicetree/bindings/serial/fsl,s32-linflexuart.yaml       | 2 +-
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml    | 4 ++--
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml      | 2 +-
 Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml   | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index badaf6d5b6fe..2d0cac642427 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -203,12 +203,12 @@ properties:
     deprecated: true
 
   aspeed,lpc-io-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
 
   aspeed,lpc-interrupts:
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
     description: |
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
index 8b643bae3c7b..920539926d7e 100644
--- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -16,7 +16,7 @@ maintainers:
   - Chester Lin <clin@suse.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index b431a0d1cd6b..4cbe76e1715b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
-  - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
+  - $ref: rs485.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 26c3593fa98b..ab81722293d3 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fugang Duan <fugang.duan@nxp.com>
 
 allOf:
-  - $ref: "rs485.yaml"
+  - $ref: rs485.yaml#
   - $ref: serial.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
index 14c7594c88c6..6a400a5e6fc7 100644
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1

[PATCH 12/13] dt-bindings: serial: drop unneeded quotes

[Krzysztof Kozlowski]

Cleanup by removing unneeded quotes from refs.  No functional impact
except adjusting to preferred coding style.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml            | 4 ++--
 .../devicetree/bindings/serial/fsl,s32-linflexuart.yaml       | 2 +-
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml    | 4 ++--
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml      | 2 +-
 Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml   | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index badaf6d5b6fe..2d0cac642427 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -203,12 +203,12 @@ properties:
     deprecated: true
 
   aspeed,lpc-io-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
 
   aspeed,lpc-interrupts:
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
     description: |
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
index 8b643bae3c7b..920539926d7e 100644
--- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -16,7 +16,7 @@ maintainers:
   - Chester Lin <clin@suse.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index b431a0d1cd6b..4cbe76e1715b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
-  - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
+  - $ref: rs485.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 26c3593fa98b..ab81722293d3 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fugang Duan <fugang.duan@nxp.com>
 
 allOf:
-  - $ref: "rs485.yaml"
+  - $ref: rs485.yaml#
   - $ref: serial.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
index 14c7594c88c6..6a400a5e6fc7 100644
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH 12/13] dt-bindings: serial: drop unneeded quotes

[Krzysztof Kozlowski]

Cleanup by removing unneeded quotes from refs.  No functional impact
except adjusting to preferred coding style.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml            | 4 ++--
 .../devicetree/bindings/serial/fsl,s32-linflexuart.yaml       | 2 +-
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml    | 4 ++--
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml      | 2 +-
 Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml   | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index badaf6d5b6fe..2d0cac642427 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -203,12 +203,12 @@ properties:
     deprecated: true
 
   aspeed,lpc-io-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
 
   aspeed,lpc-interrupts:
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
     description: |
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
index 8b643bae3c7b..920539926d7e 100644
--- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -16,7 +16,7 @@ maintainers:
   - Chester Lin <clin@suse.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index b431a0d1cd6b..4cbe76e1715b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
-  - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
+  - $ref: rs485.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 26c3593fa98b..ab81722293d3 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fugang Duan <fugang.duan@nxp.com>
 
 allOf:
-  - $ref: "rs485.yaml"
+  - $ref: rs485.yaml#
   - $ref: serial.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
index 14c7594c88c6..6a400a5e6fc7 100644
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 12/13] dt-bindings: serial: drop unneeded quotes

[Krzysztof Kozlowski]

Cleanup by removing unneeded quotes from refs.  No functional impact
except adjusting to preferred coding style.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/serial/8250.yaml            | 4 ++--
 .../devicetree/bindings/serial/fsl,s32-linflexuart.yaml       | 2 +-
 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml    | 4 ++--
 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml      | 2 +-
 Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml   | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index badaf6d5b6fe..2d0cac642427 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -203,12 +203,12 @@ properties:
     deprecated: true
 
   aspeed,lpc-io-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
 
   aspeed,lpc-interrupts:
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
     description: |
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
index 8b643bae3c7b..920539926d7e 100644
--- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -16,7 +16,7 @@ maintainers:
   - Chester Lin <clin@suse.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
index b431a0d1cd6b..4cbe76e1715b 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -10,8 +10,8 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
-  - $ref: "rs485.yaml"
+  - $ref: serial.yaml#
+  - $ref: rs485.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 26c3593fa98b..ab81722293d3 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fugang Duan <fugang.duan@nxp.com>
 
 allOf:
-  - $ref: "rs485.yaml"
+  - $ref: rs485.yaml#
   - $ref: serial.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
index 14c7594c88c6..6a400a5e6fc7 100644
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: "serial.yaml"
+  - $ref: serial.yaml#
 
 properties:
   compatible:
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 13/13] dt-bindings: serial: example cleanup

[Krzysztof Kozlowski]

Adjust example DTS indentation to match recommended style of 4-spaces
and use lower-case hex for address in reg.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/8250_omap.yaml | 18 ++++++-------
 .../bindings/serial/amlogic,meson-uart.yaml   | 10 +++----
 .../devicetree/bindings/serial/cdns,uart.yaml |  2 +-
 .../bindings/serial/renesas,em-uart.yaml      | 10 +++----
 .../bindings/serial/renesas,hscif.yaml        | 26 +++++++++----------
 .../bindings/serial/renesas,sci.yaml          | 24 ++++++++---------
 .../bindings/serial/renesas,scif.yaml         | 24 ++++++++---------
 .../bindings/serial/renesas,scifa.yaml        | 22 ++++++++--------
 .../bindings/serial/renesas,scifb.yaml        | 12 ++++-----
 .../devicetree/bindings/serial/serial.yaml    | 18 ++++++-------
 .../bindings/serial/sifive-serial.yaml        |  6 ++---
 .../bindings/serial/xlnx,opb-uartlite.yaml    |  4 +--
 12 files changed, 88 insertions(+), 88 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 7db8e5477b03..eb3488d8f9ee 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -104,12 +104,12 @@ else:
 
 examples:
   - |
-          serial@49042000 {
-            compatible = "ti,omap3-uart";
-            reg = <0x49042000 0x400>;
-            interrupts = <80>;
-            dmas = <&sdma 81 &sdma 82>;
-            dma-names = "tx", "rx";
-            ti,hwmods = "uart4";
-            clock-frequency = <48000000>;
-          };
+    serial@49042000 {
+        compatible = "ti,omap3-uart";
+        reg = <0x49042000 0x400>;
+        interrupts = <80>;
+        dmas = <&sdma 81 &sdma 82>;
+        dma-names = "tx", "rx";
+        ti,hwmods = "uart4";
+        clock-frequency = <48000000>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7abf113c966c..53d52806027d 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -77,9 +77,9 @@ unevaluatedProperties: false
 examples:
   - |
     serial@84c0 {
-          compatible = "amlogic,meson-gx-uart";
-          reg = <0x84c0 0x14>;
-          interrupts = <26>;
-          clocks = <&xtal>, <&pclk>, <&xtal>;
-          clock-names = "xtal", "pclk", "baud";
+        compatible = "amlogic,meson-gx-uart";
+        reg = <0x84c0 0x14>;
+        interrupts = <26>;
+        clocks = <&xtal>, <&pclk>, <&xtal>;
+        clock-names = "xtal", "pclk", "baud";
     };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 38925b79cb38..8bc177a6b6f8 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -72,6 +72,6 @@ examples:
       compatible = "xlnx,xuartps", "cdns,uart-r1p8";
       clocks = <&clkc 23>, <&clkc 40>;
       clock-names = "uart_clk", "pclk";
-      reg = <0xE0000000 0x1000>;
+      reg = <0xe0000000 0x1000>;
       interrupts = <0 27 4>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
index b25aca733b72..12d0fa34f9f9 100644
--- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -66,9 +66,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     uart0: serial@e1020000 {
-            compatible = "renesas,em-uart";
-            reg = <0xe1020000 0x38>;
-            interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&usia_u0_sclk>;
-            clock-names = "sclk";
+        compatible = "renesas,em-uart";
+        reg = <0xe1020000 0x38>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&usia_u0_sclk>;
+        clock-names = "sclk";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 1957b9d782e8..afedb6edfc34 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -131,20 +131,20 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7795-sysc.h>
     aliases {
-            serial1 = &hscif1;
+        serial1 = &hscif1;
     };
 
     hscif1: serial@e6550000 {
-            compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
-                         "renesas,hscif";
-            reg = <0xe6550000 96>;
-            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-            resets = <&cpg 519>;
-            uart-has-rtscts;
+        compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+                     "renesas,hscif";
+        reg = <0xe6550000 96>;
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 519>;
+        uart-has-rtscts;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index bf7708a7a2c0..dc445b327e0b 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -91,19 +91,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     aliases {
-            serial0 = &sci0;
+        serial0 = &sci0;
     };
 
     sci0: serial@1004d000 {
-            compatible = "renesas,r9a07g044-sci", "renesas,sci";
-            reg = <0x1004d000 0x400>;
-            interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "eri", "rxi", "txi", "tei";
-            clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
-            clock-names = "fck";
-            power-domains = <&cpg>;
-            resets = <&cpg R9A07G044_SCI0_RST>;
+        compatible = "renesas,r9a07g044-sci", "renesas,sci";
+        reg = <0x1004d000 0x400>;
+        interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "eri", "rxi", "txi", "tei";
+        clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+        clock-names = "fck";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_SCI0_RST>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f81f2d67a1ed..1989bd67d04e 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -180,19 +180,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7791-sysc.h>
     aliases {
-            serial0 = &scif0;
+        serial0 = &scif0;
     };
 
     scif0: serial@e6e60000 {
-            compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
-                         "renesas,scif";
-            reg = <0xe6e60000 64>;
-            interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 721>;
+        compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+                     "renesas,scif";
+        reg = <0xe6e60000 64>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 721>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
index 3c67d3202e1b..4c3b5e7270da 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -95,18 +95,18 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7790-sysc.h>
     aliases {
-            serial0 = &scifa0;
+        serial0 = &scifa0;
     };
 
     scifa0: serial@e6c40000 {
-            compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
-                         "renesas,scifa";
-            reg = <0xe6c40000 64>;
-            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 204>;
-            clock-names = "fck";
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 204>;
-            dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
-            dma-names = "tx", "rx", "tx", "rx";
+        compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+                     "renesas,scifa";
+        reg = <0xe6c40000 64>;
+        interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 204>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 204>;
+        dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+        dma-names = "tx", "rx", "tx", "rx";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
index d5571c7a4424..2f7cbbb48960 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -94,10 +94,10 @@ examples:
     #include <dt-bindings/clock/r8a7740-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     scifb: serial@e6c30000 {
-            compatible = "renesas,scifb-r8a7740", "renesas,scifb";
-            reg = <0xe6c30000 0x100>;
-            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
-            clock-names = "fck";
-            power-domains = <&pd_a3sp>;
+        compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+        reg = <0xe6c30000 0x100>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+        clock-names = "fck";
+        power-domains = <&pd_a3sp>;
     };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 21992e9a3c2b..c9231e501f1f 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -141,13 +141,13 @@ additionalProperties: true
 examples:
   - |
     serial@1234 {
-            compatible = "ns16550a";
-            reg = <0x1234 0x20>;
-            interrupts = <1>;
-
-            bluetooth {
-                    compatible = "brcm,bcm4330-bt";
-                    interrupt-parent = <&gpio>;
-                    interrupts = <10>;
-            };
+        compatible = "ns16550a";
+        reg = <0x1234 0x20>;
+        interrupts = <1>;
+
+        bluetooth {
+            compatible = "brcm,bcm4330-bt";
+            interrupt-parent = <&gpio>;
+            interrupts = <10>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index b0a8871e3641..b0df1cac4968 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -53,13 +53,13 @@ unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/sifive-fu540-prci.h>
-      serial@10010000 {
+    #include <dt-bindings/clock/sifive-fu540-prci.h>
+    serial@10010000 {
         compatible = "sifive,fu540-c000-uart", "sifive,uart0";
         interrupt-parent = <&plic0>;
         interrupts = <80>;
         reg = <0x10010000 0x1000>;
         clocks = <&prci FU540_PRCI_CLK_TLCLK>;
-      };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 6f65e9a81c29..08dcb275d8e2 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -76,7 +76,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-      serial@800c0000 {
+    serial@800c0000 {
         compatible = "xlnx,xps-uartlite-1.00.a";
         reg = <0x800c0000 0x10000>;
         interrupts = <0x0 0x6e 0x1>;
@@ -84,5 +84,5 @@ examples:
         current-speed = <115200>;
         xlnx,data-bits = <8>;
         xlnx,use-parity = <0>;
-      };
+    };
 ...
-- 
2.34.1

[PATCH 13/13] dt-bindings: serial: example cleanup

[Krzysztof Kozlowski]

Adjust example DTS indentation to match recommended style of 4-spaces
and use lower-case hex for address in reg.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/8250_omap.yaml | 18 ++++++-------
 .../bindings/serial/amlogic,meson-uart.yaml   | 10 +++----
 .../devicetree/bindings/serial/cdns,uart.yaml |  2 +-
 .../bindings/serial/renesas,em-uart.yaml      | 10 +++----
 .../bindings/serial/renesas,hscif.yaml        | 26 +++++++++----------
 .../bindings/serial/renesas,sci.yaml          | 24 ++++++++---------
 .../bindings/serial/renesas,scif.yaml         | 24 ++++++++---------
 .../bindings/serial/renesas,scifa.yaml        | 22 ++++++++--------
 .../bindings/serial/renesas,scifb.yaml        | 12 ++++-----
 .../devicetree/bindings/serial/serial.yaml    | 18 ++++++-------
 .../bindings/serial/sifive-serial.yaml        |  6 ++---
 .../bindings/serial/xlnx,opb-uartlite.yaml    |  4 +--
 12 files changed, 88 insertions(+), 88 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 7db8e5477b03..eb3488d8f9ee 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -104,12 +104,12 @@ else:
 
 examples:
   - |
-          serial@49042000 {
-            compatible = "ti,omap3-uart";
-            reg = <0x49042000 0x400>;
-            interrupts = <80>;
-            dmas = <&sdma 81 &sdma 82>;
-            dma-names = "tx", "rx";
-            ti,hwmods = "uart4";
-            clock-frequency = <48000000>;
-          };
+    serial@49042000 {
+        compatible = "ti,omap3-uart";
+        reg = <0x49042000 0x400>;
+        interrupts = <80>;
+        dmas = <&sdma 81 &sdma 82>;
+        dma-names = "tx", "rx";
+        ti,hwmods = "uart4";
+        clock-frequency = <48000000>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7abf113c966c..53d52806027d 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -77,9 +77,9 @@ unevaluatedProperties: false
 examples:
   - |
     serial@84c0 {
-          compatible = "amlogic,meson-gx-uart";
-          reg = <0x84c0 0x14>;
-          interrupts = <26>;
-          clocks = <&xtal>, <&pclk>, <&xtal>;
-          clock-names = "xtal", "pclk", "baud";
+        compatible = "amlogic,meson-gx-uart";
+        reg = <0x84c0 0x14>;
+        interrupts = <26>;
+        clocks = <&xtal>, <&pclk>, <&xtal>;
+        clock-names = "xtal", "pclk", "baud";
     };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 38925b79cb38..8bc177a6b6f8 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -72,6 +72,6 @@ examples:
       compatible = "xlnx,xuartps", "cdns,uart-r1p8";
       clocks = <&clkc 23>, <&clkc 40>;
       clock-names = "uart_clk", "pclk";
-      reg = <0xE0000000 0x1000>;
+      reg = <0xe0000000 0x1000>;
       interrupts = <0 27 4>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
index b25aca733b72..12d0fa34f9f9 100644
--- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -66,9 +66,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     uart0: serial@e1020000 {
-            compatible = "renesas,em-uart";
-            reg = <0xe1020000 0x38>;
-            interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&usia_u0_sclk>;
-            clock-names = "sclk";
+        compatible = "renesas,em-uart";
+        reg = <0xe1020000 0x38>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&usia_u0_sclk>;
+        clock-names = "sclk";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 1957b9d782e8..afedb6edfc34 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -131,20 +131,20 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7795-sysc.h>
     aliases {
-            serial1 = &hscif1;
+        serial1 = &hscif1;
     };
 
     hscif1: serial@e6550000 {
-            compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
-                         "renesas,hscif";
-            reg = <0xe6550000 96>;
-            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-            resets = <&cpg 519>;
-            uart-has-rtscts;
+        compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+                     "renesas,hscif";
+        reg = <0xe6550000 96>;
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 519>;
+        uart-has-rtscts;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index bf7708a7a2c0..dc445b327e0b 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -91,19 +91,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     aliases {
-            serial0 = &sci0;
+        serial0 = &sci0;
     };
 
     sci0: serial@1004d000 {
-            compatible = "renesas,r9a07g044-sci", "renesas,sci";
-            reg = <0x1004d000 0x400>;
-            interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "eri", "rxi", "txi", "tei";
-            clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
-            clock-names = "fck";
-            power-domains = <&cpg>;
-            resets = <&cpg R9A07G044_SCI0_RST>;
+        compatible = "renesas,r9a07g044-sci", "renesas,sci";
+        reg = <0x1004d000 0x400>;
+        interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "eri", "rxi", "txi", "tei";
+        clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+        clock-names = "fck";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_SCI0_RST>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f81f2d67a1ed..1989bd67d04e 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -180,19 +180,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7791-sysc.h>
     aliases {
-            serial0 = &scif0;
+        serial0 = &scif0;
     };
 
     scif0: serial@e6e60000 {
-            compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
-                         "renesas,scif";
-            reg = <0xe6e60000 64>;
-            interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 721>;
+        compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+                     "renesas,scif";
+        reg = <0xe6e60000 64>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 721>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
index 3c67d3202e1b..4c3b5e7270da 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -95,18 +95,18 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7790-sysc.h>
     aliases {
-            serial0 = &scifa0;
+        serial0 = &scifa0;
     };
 
     scifa0: serial@e6c40000 {
-            compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
-                         "renesas,scifa";
-            reg = <0xe6c40000 64>;
-            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 204>;
-            clock-names = "fck";
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 204>;
-            dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
-            dma-names = "tx", "rx", "tx", "rx";
+        compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+                     "renesas,scifa";
+        reg = <0xe6c40000 64>;
+        interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 204>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 204>;
+        dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+        dma-names = "tx", "rx", "tx", "rx";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
index d5571c7a4424..2f7cbbb48960 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -94,10 +94,10 @@ examples:
     #include <dt-bindings/clock/r8a7740-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     scifb: serial@e6c30000 {
-            compatible = "renesas,scifb-r8a7740", "renesas,scifb";
-            reg = <0xe6c30000 0x100>;
-            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
-            clock-names = "fck";
-            power-domains = <&pd_a3sp>;
+        compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+        reg = <0xe6c30000 0x100>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+        clock-names = "fck";
+        power-domains = <&pd_a3sp>;
     };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 21992e9a3c2b..c9231e501f1f 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -141,13 +141,13 @@ additionalProperties: true
 examples:
   - |
     serial@1234 {
-            compatible = "ns16550a";
-            reg = <0x1234 0x20>;
-            interrupts = <1>;
-
-            bluetooth {
-                    compatible = "brcm,bcm4330-bt";
-                    interrupt-parent = <&gpio>;
-                    interrupts = <10>;
-            };
+        compatible = "ns16550a";
+        reg = <0x1234 0x20>;
+        interrupts = <1>;
+
+        bluetooth {
+            compatible = "brcm,bcm4330-bt";
+            interrupt-parent = <&gpio>;
+            interrupts = <10>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index b0a8871e3641..b0df1cac4968 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -53,13 +53,13 @@ unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/sifive-fu540-prci.h>
-      serial@10010000 {
+    #include <dt-bindings/clock/sifive-fu540-prci.h>
+    serial@10010000 {
         compatible = "sifive,fu540-c000-uart", "sifive,uart0";
         interrupt-parent = <&plic0>;
         interrupts = <80>;
         reg = <0x10010000 0x1000>;
         clocks = <&prci FU540_PRCI_CLK_TLCLK>;
-      };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 6f65e9a81c29..08dcb275d8e2 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -76,7 +76,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-      serial@800c0000 {
+    serial@800c0000 {
         compatible = "xlnx,xps-uartlite-1.00.a";
         reg = <0x800c0000 0x10000>;
         interrupts = <0x0 0x6e 0x1>;
@@ -84,5 +84,5 @@ examples:
         current-speed = <115200>;
         xlnx,data-bits = <8>;
         xlnx,use-parity = <0>;
-      };
+    };
 ...
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 13/13] dt-bindings: serial: example cleanup

[Krzysztof Kozlowski]

Adjust example DTS indentation to match recommended style of 4-spaces
and use lower-case hex for address in reg.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/8250_omap.yaml | 18 ++++++-------
 .../bindings/serial/amlogic,meson-uart.yaml   | 10 +++----
 .../devicetree/bindings/serial/cdns,uart.yaml |  2 +-
 .../bindings/serial/renesas,em-uart.yaml      | 10 +++----
 .../bindings/serial/renesas,hscif.yaml        | 26 +++++++++----------
 .../bindings/serial/renesas,sci.yaml          | 24 ++++++++---------
 .../bindings/serial/renesas,scif.yaml         | 24 ++++++++---------
 .../bindings/serial/renesas,scifa.yaml        | 22 ++++++++--------
 .../bindings/serial/renesas,scifb.yaml        | 12 ++++-----
 .../devicetree/bindings/serial/serial.yaml    | 18 ++++++-------
 .../bindings/serial/sifive-serial.yaml        |  6 ++---
 .../bindings/serial/xlnx,opb-uartlite.yaml    |  4 +--
 12 files changed, 88 insertions(+), 88 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 7db8e5477b03..eb3488d8f9ee 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -104,12 +104,12 @@ else:
 
 examples:
   - |
-          serial@49042000 {
-            compatible = "ti,omap3-uart";
-            reg = <0x49042000 0x400>;
-            interrupts = <80>;
-            dmas = <&sdma 81 &sdma 82>;
-            dma-names = "tx", "rx";
-            ti,hwmods = "uart4";
-            clock-frequency = <48000000>;
-          };
+    serial@49042000 {
+        compatible = "ti,omap3-uart";
+        reg = <0x49042000 0x400>;
+        interrupts = <80>;
+        dmas = <&sdma 81 &sdma 82>;
+        dma-names = "tx", "rx";
+        ti,hwmods = "uart4";
+        clock-frequency = <48000000>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7abf113c966c..53d52806027d 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -77,9 +77,9 @@ unevaluatedProperties: false
 examples:
   - |
     serial@84c0 {
-          compatible = "amlogic,meson-gx-uart";
-          reg = <0x84c0 0x14>;
-          interrupts = <26>;
-          clocks = <&xtal>, <&pclk>, <&xtal>;
-          clock-names = "xtal", "pclk", "baud";
+        compatible = "amlogic,meson-gx-uart";
+        reg = <0x84c0 0x14>;
+        interrupts = <26>;
+        clocks = <&xtal>, <&pclk>, <&xtal>;
+        clock-names = "xtal", "pclk", "baud";
     };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 38925b79cb38..8bc177a6b6f8 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -72,6 +72,6 @@ examples:
       compatible = "xlnx,xuartps", "cdns,uart-r1p8";
       clocks = <&clkc 23>, <&clkc 40>;
       clock-names = "uart_clk", "pclk";
-      reg = <0xE0000000 0x1000>;
+      reg = <0xe0000000 0x1000>;
       interrupts = <0 27 4>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
index b25aca733b72..12d0fa34f9f9 100644
--- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -66,9 +66,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     uart0: serial@e1020000 {
-            compatible = "renesas,em-uart";
-            reg = <0xe1020000 0x38>;
-            interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&usia_u0_sclk>;
-            clock-names = "sclk";
+        compatible = "renesas,em-uart";
+        reg = <0xe1020000 0x38>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&usia_u0_sclk>;
+        clock-names = "sclk";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 1957b9d782e8..afedb6edfc34 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -131,20 +131,20 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7795-sysc.h>
     aliases {
-            serial1 = &hscif1;
+        serial1 = &hscif1;
     };
 
     hscif1: serial@e6550000 {
-            compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
-                         "renesas,hscif";
-            reg = <0xe6550000 96>;
-            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-            resets = <&cpg 519>;
-            uart-has-rtscts;
+        compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+                     "renesas,hscif";
+        reg = <0xe6550000 96>;
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 519>;
+        uart-has-rtscts;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index bf7708a7a2c0..dc445b327e0b 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -91,19 +91,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     aliases {
-            serial0 = &sci0;
+        serial0 = &sci0;
     };
 
     sci0: serial@1004d000 {
-            compatible = "renesas,r9a07g044-sci", "renesas,sci";
-            reg = <0x1004d000 0x400>;
-            interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "eri", "rxi", "txi", "tei";
-            clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
-            clock-names = "fck";
-            power-domains = <&cpg>;
-            resets = <&cpg R9A07G044_SCI0_RST>;
+        compatible = "renesas,r9a07g044-sci", "renesas,sci";
+        reg = <0x1004d000 0x400>;
+        interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "eri", "rxi", "txi", "tei";
+        clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+        clock-names = "fck";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_SCI0_RST>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f81f2d67a1ed..1989bd67d04e 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -180,19 +180,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7791-sysc.h>
     aliases {
-            serial0 = &scif0;
+        serial0 = &scif0;
     };
 
     scif0: serial@e6e60000 {
-            compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
-                         "renesas,scif";
-            reg = <0xe6e60000 64>;
-            interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 721>;
+        compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+                     "renesas,scif";
+        reg = <0xe6e60000 64>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 721>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
index 3c67d3202e1b..4c3b5e7270da 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -95,18 +95,18 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7790-sysc.h>
     aliases {
-            serial0 = &scifa0;
+        serial0 = &scifa0;
     };
 
     scifa0: serial@e6c40000 {
-            compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
-                         "renesas,scifa";
-            reg = <0xe6c40000 64>;
-            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 204>;
-            clock-names = "fck";
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 204>;
-            dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
-            dma-names = "tx", "rx", "tx", "rx";
+        compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+                     "renesas,scifa";
+        reg = <0xe6c40000 64>;
+        interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 204>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 204>;
+        dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+        dma-names = "tx", "rx", "tx", "rx";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
index d5571c7a4424..2f7cbbb48960 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -94,10 +94,10 @@ examples:
     #include <dt-bindings/clock/r8a7740-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     scifb: serial@e6c30000 {
-            compatible = "renesas,scifb-r8a7740", "renesas,scifb";
-            reg = <0xe6c30000 0x100>;
-            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
-            clock-names = "fck";
-            power-domains = <&pd_a3sp>;
+        compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+        reg = <0xe6c30000 0x100>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+        clock-names = "fck";
+        power-domains = <&pd_a3sp>;
     };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 21992e9a3c2b..c9231e501f1f 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -141,13 +141,13 @@ additionalProperties: true
 examples:
   - |
     serial@1234 {
-            compatible = "ns16550a";
-            reg = <0x1234 0x20>;
-            interrupts = <1>;
-
-            bluetooth {
-                    compatible = "brcm,bcm4330-bt";
-                    interrupt-parent = <&gpio>;
-                    interrupts = <10>;
-            };
+        compatible = "ns16550a";
+        reg = <0x1234 0x20>;
+        interrupts = <1>;
+
+        bluetooth {
+            compatible = "brcm,bcm4330-bt";
+            interrupt-parent = <&gpio>;
+            interrupts = <10>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index b0a8871e3641..b0df1cac4968 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -53,13 +53,13 @@ unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/sifive-fu540-prci.h>
-      serial@10010000 {
+    #include <dt-bindings/clock/sifive-fu540-prci.h>
+    serial@10010000 {
         compatible = "sifive,fu540-c000-uart", "sifive,uart0";
         interrupt-parent = <&plic0>;
         interrupts = <80>;
         reg = <0x10010000 0x1000>;
         clocks = <&prci FU540_PRCI_CLK_TLCLK>;
-      };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 6f65e9a81c29..08dcb275d8e2 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -76,7 +76,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-      serial@800c0000 {
+    serial@800c0000 {
         compatible = "xlnx,xps-uartlite-1.00.a";
         reg = <0x800c0000 0x10000>;
         interrupts = <0x0 0x6e 0x1>;
@@ -84,5 +84,5 @@ examples:
         current-speed = <115200>;
         xlnx,data-bits = <8>;
         xlnx,use-parity = <0>;
-      };
+    };
 ...
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 13/13] dt-bindings: serial: example cleanup

[Krzysztof Kozlowski]

Adjust example DTS indentation to match recommended style of 4-spaces
and use lower-case hex for address in reg.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/serial/8250_omap.yaml | 18 ++++++-------
 .../bindings/serial/amlogic,meson-uart.yaml   | 10 +++----
 .../devicetree/bindings/serial/cdns,uart.yaml |  2 +-
 .../bindings/serial/renesas,em-uart.yaml      | 10 +++----
 .../bindings/serial/renesas,hscif.yaml        | 26 +++++++++----------
 .../bindings/serial/renesas,sci.yaml          | 24 ++++++++---------
 .../bindings/serial/renesas,scif.yaml         | 24 ++++++++---------
 .../bindings/serial/renesas,scifa.yaml        | 22 ++++++++--------
 .../bindings/serial/renesas,scifb.yaml        | 12 ++++-----
 .../devicetree/bindings/serial/serial.yaml    | 18 ++++++-------
 .../bindings/serial/sifive-serial.yaml        |  6 ++---
 .../bindings/serial/xlnx,opb-uartlite.yaml    |  4 +--
 12 files changed, 88 insertions(+), 88 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 7db8e5477b03..eb3488d8f9ee 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -104,12 +104,12 @@ else:
 
 examples:
   - |
-          serial@49042000 {
-            compatible = "ti,omap3-uart";
-            reg = <0x49042000 0x400>;
-            interrupts = <80>;
-            dmas = <&sdma 81 &sdma 82>;
-            dma-names = "tx", "rx";
-            ti,hwmods = "uart4";
-            clock-frequency = <48000000>;
-          };
+    serial@49042000 {
+        compatible = "ti,omap3-uart";
+        reg = <0x49042000 0x400>;
+        interrupts = <80>;
+        dmas = <&sdma 81 &sdma 82>;
+        dma-names = "tx", "rx";
+        ti,hwmods = "uart4";
+        clock-frequency = <48000000>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7abf113c966c..53d52806027d 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -77,9 +77,9 @@ unevaluatedProperties: false
 examples:
   - |
     serial@84c0 {
-          compatible = "amlogic,meson-gx-uart";
-          reg = <0x84c0 0x14>;
-          interrupts = <26>;
-          clocks = <&xtal>, <&pclk>, <&xtal>;
-          clock-names = "xtal", "pclk", "baud";
+        compatible = "amlogic,meson-gx-uart";
+        reg = <0x84c0 0x14>;
+        interrupts = <26>;
+        clocks = <&xtal>, <&pclk>, <&xtal>;
+        clock-names = "xtal", "pclk", "baud";
     };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index 38925b79cb38..8bc177a6b6f8 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -72,6 +72,6 @@ examples:
       compatible = "xlnx,xuartps", "cdns,uart-r1p8";
       clocks = <&clkc 23>, <&clkc 40>;
       clock-names = "uart_clk", "pclk";
-      reg = <0xE0000000 0x1000>;
+      reg = <0xe0000000 0x1000>;
       interrupts = <0 27 4>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
index b25aca733b72..12d0fa34f9f9 100644
--- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -66,9 +66,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     uart0: serial@e1020000 {
-            compatible = "renesas,em-uart";
-            reg = <0xe1020000 0x38>;
-            interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&usia_u0_sclk>;
-            clock-names = "sclk";
+        compatible = "renesas,em-uart";
+        reg = <0xe1020000 0x38>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&usia_u0_sclk>;
+        clock-names = "sclk";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 1957b9d782e8..afedb6edfc34 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -131,20 +131,20 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7795-sysc.h>
     aliases {
-            serial1 = &hscif1;
+        serial1 = &hscif1;
     };
 
     hscif1: serial@e6550000 {
-            compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
-                         "renesas,hscif";
-            reg = <0xe6550000 96>;
-            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-            resets = <&cpg 519>;
-            uart-has-rtscts;
+        compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+                     "renesas,hscif";
+        reg = <0xe6550000 96>;
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 519>;
+        uart-has-rtscts;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index bf7708a7a2c0..dc445b327e0b 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -91,19 +91,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     aliases {
-            serial0 = &sci0;
+        serial0 = &sci0;
     };
 
     sci0: serial@1004d000 {
-            compatible = "renesas,r9a07g044-sci", "renesas,sci";
-            reg = <0x1004d000 0x400>;
-            interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "eri", "rxi", "txi", "tei";
-            clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
-            clock-names = "fck";
-            power-domains = <&cpg>;
-            resets = <&cpg R9A07G044_SCI0_RST>;
+        compatible = "renesas,r9a07g044-sci", "renesas,sci";
+        reg = <0x1004d000 0x400>;
+        interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "eri", "rxi", "txi", "tei";
+        clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+        clock-names = "fck";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_SCI0_RST>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f81f2d67a1ed..1989bd67d04e 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -180,19 +180,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7791-sysc.h>
     aliases {
-            serial0 = &scif0;
+        serial0 = &scif0;
     };
 
     scif0: serial@e6e60000 {
-            compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
-                         "renesas,scif";
-            reg = <0xe6e60000 64>;
-            interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
-                     <&scif_clk>;
-            clock-names = "fck", "brg_int", "scif_clk";
-            dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 721>;
+        compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+                     "renesas,scif";
+        reg = <0xe6e60000 64>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 721>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
index 3c67d3202e1b..4c3b5e7270da 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -95,18 +95,18 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a7790-sysc.h>
     aliases {
-            serial0 = &scifa0;
+        serial0 = &scifa0;
     };
 
     scifa0: serial@e6c40000 {
-            compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
-                         "renesas,scifa";
-            reg = <0xe6c40000 64>;
-            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 204>;
-            clock-names = "fck";
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 204>;
-            dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
-            dma-names = "tx", "rx", "tx", "rx";
+        compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+                     "renesas,scifa";
+        reg = <0xe6c40000 64>;
+        interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 204>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 204>;
+        dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+        dma-names = "tx", "rx", "tx", "rx";
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
index d5571c7a4424..2f7cbbb48960 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -94,10 +94,10 @@ examples:
     #include <dt-bindings/clock/r8a7740-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     scifb: serial@e6c30000 {
-            compatible = "renesas,scifb-r8a7740", "renesas,scifb";
-            reg = <0xe6c30000 0x100>;
-            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
-            clock-names = "fck";
-            power-domains = <&pd_a3sp>;
+        compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+        reg = <0xe6c30000 0x100>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+        clock-names = "fck";
+        power-domains = <&pd_a3sp>;
     };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 21992e9a3c2b..c9231e501f1f 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -141,13 +141,13 @@ additionalProperties: true
 examples:
   - |
     serial@1234 {
-            compatible = "ns16550a";
-            reg = <0x1234 0x20>;
-            interrupts = <1>;
-
-            bluetooth {
-                    compatible = "brcm,bcm4330-bt";
-                    interrupt-parent = <&gpio>;
-                    interrupts = <10>;
-            };
+        compatible = "ns16550a";
+        reg = <0x1234 0x20>;
+        interrupts = <1>;
+
+        bluetooth {
+            compatible = "brcm,bcm4330-bt";
+            interrupt-parent = <&gpio>;
+            interrupts = <10>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index b0a8871e3641..b0df1cac4968 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -53,13 +53,13 @@ unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/sifive-fu540-prci.h>
-      serial@10010000 {
+    #include <dt-bindings/clock/sifive-fu540-prci.h>
+    serial@10010000 {
         compatible = "sifive,fu540-c000-uart", "sifive,uart0";
         interrupt-parent = <&plic0>;
         interrupts = <80>;
         reg = <0x10010000 0x1000>;
         clocks = <&prci FU540_PRCI_CLK_TLCLK>;
-      };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index 6f65e9a81c29..08dcb275d8e2 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -76,7 +76,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-      serial@800c0000 {
+    serial@800c0000 {
         compatible = "xlnx,xps-uartlite-1.00.a";
         reg = <0x800c0000 0x10000>;
         interrupts = <0x0 0x6e 0x1>;
@@ -84,5 +84,5 @@ examples:
         current-speed = <115200>;
         xlnx,data-bits = <8>;
         xlnx,use-parity = <0>;
-      };
+    };
 ...
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Neil Armstrong]

On 23/01/2023 16:12, Krzysztof Kozlowski wrote:
> Reference common serial properties bindings to allow typical serial
> properties:
> 
>    meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 

<snip>

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Neil Armstrong]

On 23/01/2023 16:12, Krzysztof Kozlowski wrote:
> Reference common serial properties bindings to allow typical serial
> properties:
> 
>    meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 

<snip>

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Neil Armstrong]

On 23/01/2023 16:12, Krzysztof Kozlowski wrote:
> Reference common serial properties bindings to allow typical serial
> properties:
> 
>    meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 

<snip>

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties

[Neil Armstrong]

On 23/01/2023 16:12, Krzysztof Kozlowski wrote:
> Reference common serial properties bindings to allow typical serial
> properties:
> 
>    meson-axg-jethome-jethub-j100.dtb: serial@23000: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/amlogic,meson-uart.yaml       | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 

<snip>

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> 
> Few Xilinx DTS have power domains in serial node:
> 
>    zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
>   1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 0c118d5336cc..38925b79cb38 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -9,9 +9,6 @@ title: Cadence UART Controller
>   maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
> -allOf:
> -  - $ref: serial.yaml#
> -
>   properties:
>     compatible:
>       oneOf:
> @@ -46,6 +43,9 @@ properties:
>         port does not use this pin.
>       type: boolean
> 
> +  power-domains:
> +    maxItems: 1
> +
>   required:
>     - compatible
>     - reg
> @@ -53,6 +53,17 @@ required:
>     - clocks
>     - clock-names
> 
> +allOf:
> +  - $ref: serial.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: cdns,uart-r1p8
> +    then:
> +      properties:
> +        power-domains: false
> +
>   unevaluatedProperties: false
> 
>   examples:
> --
> 2.34.1
> 

Reviewed-by: Michal Simek <michal.simek@amd.com>

btw: I was running it and I have seen that properties are checked only on nodes 
which have status property okay. On disabled nodes properties are not checked. 
Is this standard behavior/setting?

Thanks,
Michal

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> 
> Few Xilinx DTS have power domains in serial node:
> 
>    zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
>   1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 0c118d5336cc..38925b79cb38 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -9,9 +9,6 @@ title: Cadence UART Controller
>   maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
> -allOf:
> -  - $ref: serial.yaml#
> -
>   properties:
>     compatible:
>       oneOf:
> @@ -46,6 +43,9 @@ properties:
>         port does not use this pin.
>       type: boolean
> 
> +  power-domains:
> +    maxItems: 1
> +
>   required:
>     - compatible
>     - reg
> @@ -53,6 +53,17 @@ required:
>     - clocks
>     - clock-names
> 
> +allOf:
> +  - $ref: serial.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: cdns,uart-r1p8
> +    then:
> +      properties:
> +        power-domains: false
> +
>   unevaluatedProperties: false
> 
>   examples:
> --
> 2.34.1
> 

Reviewed-by: Michal Simek <michal.simek@amd.com>

btw: I was running it and I have seen that properties are checked only on nodes 
which have status property okay. On disabled nodes properties are not checked. 
Is this standard behavior/setting?

Thanks,
Michal

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> 
> Few Xilinx DTS have power domains in serial node:
> 
>    zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
>   1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 0c118d5336cc..38925b79cb38 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -9,9 +9,6 @@ title: Cadence UART Controller
>   maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
> -allOf:
> -  - $ref: serial.yaml#
> -
>   properties:
>     compatible:
>       oneOf:
> @@ -46,6 +43,9 @@ properties:
>         port does not use this pin.
>       type: boolean
> 
> +  power-domains:
> +    maxItems: 1
> +
>   required:
>     - compatible
>     - reg
> @@ -53,6 +53,17 @@ required:
>     - clocks
>     - clock-names
> 
> +allOf:
> +  - $ref: serial.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: cdns,uart-r1p8
> +    then:
> +      properties:
> +        power-domains: false
> +
>   unevaluatedProperties: false
> 
>   examples:
> --
> 2.34.1
> 

Reviewed-by: Michal Simek <michal.simek@amd.com>

btw: I was running it and I have seen that properties are checked only on nodes 
which have status property okay. On disabled nodes properties are not checked. 
Is this standard behavior/setting?

Thanks,
Michal

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> 
> Few Xilinx DTS have power domains in serial node:
> 
>    zynqmp-zc1232-revA.dtb: serial@ff000000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../devicetree/bindings/serial/cdns,uart.yaml   | 17 ++++++++++++++---
>   1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 0c118d5336cc..38925b79cb38 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -9,9 +9,6 @@ title: Cadence UART Controller
>   maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
> -allOf:
> -  - $ref: serial.yaml#
> -
>   properties:
>     compatible:
>       oneOf:
> @@ -46,6 +43,9 @@ properties:
>         port does not use this pin.
>       type: boolean
> 
> +  power-domains:
> +    maxItems: 1
> +
>   required:
>     - compatible
>     - reg
> @@ -53,6 +53,17 @@ required:
>     - clocks
>     - clock-names
> 
> +allOf:
> +  - $ref: serial.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: cdns,uart-r1p8
> +    then:
> +      properties:
> +        power-domains: false
> +
>   unevaluatedProperties: false
> 
>   examples:
> --
> 2.34.1
> 

Reviewed-by: Michal Simek <michal.simek@amd.com>

btw: I was running it and I have seen that properties are checked only on nodes 
which have status property okay. On disabled nodes properties are not checked. 
Is this standard behavior/setting?

Thanks,
Michal

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
> 
> 
> The serial bindings should reference the local (in kernel) serial.yaml,
> not the /schemas/serial.yaml.  The latter comes from dtschema package
> and is a small subset of serial bindings.
> 
> Usage of the local serial.yaml allows typical properties and children:
> 
>    xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
>   Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 876b8cf1cafb..0c118d5336cc 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -10,7 +10,7 @@ maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
> 
>   properties:
>     compatible:
> diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> index 2f4390e8d4e8..6f65e9a81c29 100644
> --- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> +++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> @@ -63,7 +63,7 @@ required:
>     - xlnx,use-parity
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
>     - if:
>         properties:
>           xlnx,use-parity:
> --
> 2.34.1
> 

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal

Re: [PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
> 
> 
> The serial bindings should reference the local (in kernel) serial.yaml,
> not the /schemas/serial.yaml.  The latter comes from dtschema package
> and is a small subset of serial bindings.
> 
> Usage of the local serial.yaml allows typical properties and children:
> 
>    xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
>   Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 876b8cf1cafb..0c118d5336cc 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -10,7 +10,7 @@ maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
> 
>   properties:
>     compatible:
> diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> index 2f4390e8d4e8..6f65e9a81c29 100644
> --- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> +++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> @@ -63,7 +63,7 @@ required:
>     - xlnx,use-parity
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
>     - if:
>         properties:
>           xlnx,use-parity:
> --
> 2.34.1
> 

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
> 
> 
> The serial bindings should reference the local (in kernel) serial.yaml,
> not the /schemas/serial.yaml.  The latter comes from dtschema package
> and is a small subset of serial bindings.
> 
> Usage of the local serial.yaml allows typical properties and children:
> 
>    xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
>   Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 876b8cf1cafb..0c118d5336cc 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -10,7 +10,7 @@ maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
> 
>   properties:
>     compatible:
> diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> index 2f4390e8d4e8..6f65e9a81c29 100644
> --- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> +++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> @@ -63,7 +63,7 @@ required:
>     - xlnx,use-parity
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
>     - if:
>         properties:
>           xlnx,use-parity:
> --
> 2.34.1
> 

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml

[Michal Simek]

On 1/23/23 16:12, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
> 
> 
> The serial bindings should reference the local (in kernel) serial.yaml,
> not the /schemas/serial.yaml.  The latter comes from dtschema package
> and is a small subset of serial bindings.
> 
> Usage of the local serial.yaml allows typical properties and children:
> 
>    xilinx/avnet-ultra96-rev1.dtb: serial@ff000000: Unevaluated properties are not allowed ('bluetooth' were unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   Documentation/devicetree/bindings/serial/cdns,uart.yaml         | 2 +-
>   Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> index 876b8cf1cafb..0c118d5336cc 100644
> --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
> @@ -10,7 +10,7 @@ maintainers:
>     - Michal Simek <michal.simek@xilinx.com>
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
> 
>   properties:
>     compatible:
> diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> index 2f4390e8d4e8..6f65e9a81c29 100644
> --- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> +++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
> @@ -63,7 +63,7 @@ required:
>     - xlnx,use-parity
> 
>   allOf:
> -  - $ref: /schemas/serial.yaml#
> +  - $ref: serial.yaml#
>     - if:
>         properties:
>           xlnx,use-parity:
> --
> 2.34.1
> 

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

On 23/01/2023 16:39, Michal Simek wrote:
>>
>>   examples:
>> --
>> 2.34.1
>>
> 
> Reviewed-by: Michal Simek <michal.simek@amd.com>
> 
> btw: I was running it and I have seen that properties are checked only on nodes 
> which have status property okay. On disabled nodes properties are not checked. 
> Is this standard behavior/setting?

Yes, because disabled nodes might be missing several properties (e.g.
clocks or supplies).

Best regards,
Krzysztof

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

On 23/01/2023 16:39, Michal Simek wrote:
>>
>>   examples:
>> --
>> 2.34.1
>>
> 
> Reviewed-by: Michal Simek <michal.simek@amd.com>
> 
> btw: I was running it and I have seen that properties are checked only on nodes 
> which have status property okay. On disabled nodes properties are not checked. 
> Is this standard behavior/setting?

Yes, because disabled nodes might be missing several properties (e.g.
clocks or supplies).

Best regards,
Krzysztof


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

On 23/01/2023 16:39, Michal Simek wrote:
>>
>>   examples:
>> --
>> 2.34.1
>>
> 
> Reviewed-by: Michal Simek <michal.simek@amd.com>
> 
> btw: I was running it and I have seen that properties are checked only on nodes 
> which have status property okay. On disabled nodes properties are not checked. 
> Is this standard behavior/setting?

Yes, because disabled nodes might be missing several properties (e.g.
clocks or supplies).

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains

[Krzysztof Kozlowski]

On 23/01/2023 16:39, Michal Simek wrote:
>>
>>   examples:
>> --
>> 2.34.1
>>
> 
> Reviewed-by: Michal Simek <michal.simek@amd.com>
> 
> btw: I was running it and I have seen that properties are checked only on nodes 
> which have status property okay. On disabled nodes properties are not checked. 
> Is this standard behavior/setting?

Yes, because disabled nodes might be missing several properties (e.g.
clocks or supplies).

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> The re-usable serial.yaml schema matches every property with ".*"
> pattern, thus any other schema referencing it will not report unknown
> (unevaluated) properties.  This hides several wrong properties.  It is
> a limitation of dtschema, thus provide a simple workaround: expect
> children to be only of few names matching upstream usage (Bluetooth,
> GNSS, GPS and MCU).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230123151302.368277-11-krzysztof.kozlowski@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> The re-usable serial.yaml schema matches every property with ".*"
> pattern, thus any other schema referencing it will not report unknown
> (unevaluated) properties.  This hides several wrong properties.  It is
> a limitation of dtschema, thus provide a simple workaround: expect
> children to be only of few names matching upstream usage (Bluetooth,
> GNSS, GPS and MCU).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230123151302.368277-11-krzysztof.kozlowski@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> The re-usable serial.yaml schema matches every property with ".*"
> pattern, thus any other schema referencing it will not report unknown
> (unevaluated) properties.  This hides several wrong properties.  It is
> a limitation of dtschema, thus provide a simple workaround: expect
> children to be only of few names matching upstream usage (Bluetooth,
> GNSS, GPS and MCU).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230123151302.368277-11-krzysztof.kozlowski@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> The re-usable serial.yaml schema matches every property with ".*"
> pattern, thus any other schema referencing it will not report unknown
> (unevaluated) properties.  This hides several wrong properties.  It is
> a limitation of dtschema, thus provide a simple workaround: expect
> children to be only of few names matching upstream usage (Bluetooth,
> GNSS, GPS and MCU).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230123151302.368277-11-krzysztof.kozlowski@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Did I just forgot to test all the bindings (except the changed ones)? It
seems so, therefoer note to myself:

Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions). :)

Best regards,
Krzysztof

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Did I just forgot to test all the bindings (except the changed ones)? It
seems so, therefoer note to myself:

Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions). :)

Best regards,
Krzysztof


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Did I just forgot to test all the bindings (except the changed ones)? It
seems so, therefoer note to myself:

Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions). :)

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Did I just forgot to test all the bindings (except the changed ones)? It
seems so, therefoer note to myself:

Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions). :)

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Eh, this is not trivial to solve. The
"intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
children nodes, just like spi-peripheral-props:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Any node can be there:
1. serial, which was broken since beginning but errors not visible,
2. flash, which work fine just because mtd-physmap.yaml allows it,
3. more?

Existing DTS of this ixp4xx controller have different nodes, for example:
flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40

Probably we need expansion-bus-controller-peripheral-props.yaml and
include it in every possible child. Does it sound reasonable?

Best regards,
Krzysztof

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Eh, this is not trivial to solve. The
"intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
children nodes, just like spi-peripheral-props:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Any node can be there:
1. serial, which was broken since beginning but errors not visible,
2. flash, which work fine just because mtd-physmap.yaml allows it,
3. more?

Existing DTS of this ixp4xx controller have different nodes, for example:
flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40

Probably we need expansion-bus-controller-peripheral-props.yaml and
include it in every possible child. Does it sound reasonable?

Best regards,
Krzysztof


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Eh, this is not trivial to solve. The
"intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
children nodes, just like spi-peripheral-props:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Any node can be there:
1. serial, which was broken since beginning but errors not visible,
2. flash, which work fine just because mtd-physmap.yaml allows it,
3. more?

Existing DTS of this ixp4xx controller have different nodes, for example:
flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40

Probably we need expansion-bus-controller-peripheral-props.yaml and
include it in every possible child. Does it sound reasonable?

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Krzysztof Kozlowski]

On 24/01/2023 00:05, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
>> The re-usable serial.yaml schema matches every property with ".*"
>> pattern, thus any other schema referencing it will not report unknown
>> (unevaluated) properties.  This hides several wrong properties.  It is
>> a limitation of dtschema, thus provide a simple workaround: expect
>> children to be only of few names matching upstream usage (Bluetooth,
>> GNSS, GPS and MCU).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml

Eh, this is not trivial to solve. The
"intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
children nodes, just like spi-peripheral-props:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Any node can be there:
1. serial, which was broken since beginning but errors not visible,
2. flash, which work fine just because mtd-physmap.yaml allows it,
3. more?

Existing DTS of this ixp4xx controller have different nodes, for example:
flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40

Probably we need expansion-bus-controller-peripheral-props.yaml and
include it in every possible child. Does it sound reasonable?

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Tue, Jan 24, 2023 at 3:05 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 24/01/2023 00:05, Rob Herring wrote:
> >
> > On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> >> The re-usable serial.yaml schema matches every property with ".*"
> >> pattern, thus any other schema referencing it will not report unknown
> >> (unevaluated) properties.  This hides several wrong properties.  It is
> >> a limitation of dtschema, thus provide a simple workaround: expect
> >> children to be only of few names matching upstream usage (Bluetooth,
> >> GNSS, GPS and MCU).
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >> ---
> >>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> >       From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml
>
> Eh, this is not trivial to solve. The
> "intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
> children nodes, just like spi-peripheral-props:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Yep, those properties probably need to go into mc-peripheral-props.yaml.

> Any node can be there:
> 1. serial, which was broken since beginning but errors not visible,

8250 only in all likelyhood.

> 2. flash, which work fine just because mtd-physmap.yaml allows it,
> 3. more?

I guess it is *only* external parallel bus devices...

>
> Existing DTS of this ixp4xx controller have different nodes, for example:
> flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:

'shared-dma-pool' is odd.

So is max6369. Looks like that h/w was creatively attached.

> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40
>
> Probably we need expansion-bus-controller-peripheral-props.yaml and
> include it in every possible child. Does it sound reasonable?

What's the difference to mc-peripheral-props.yaml?

Honestly, this stuff is somewhat rare that I'd rather worry about it
later. Maybe ixp4xx will be removed by then... We could just comment
out the problematic parts of the example for now.

Rob

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Tue, Jan 24, 2023 at 3:05 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 24/01/2023 00:05, Rob Herring wrote:
> >
> > On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> >> The re-usable serial.yaml schema matches every property with ".*"
> >> pattern, thus any other schema referencing it will not report unknown
> >> (unevaluated) properties.  This hides several wrong properties.  It is
> >> a limitation of dtschema, thus provide a simple workaround: expect
> >> children to be only of few names matching upstream usage (Bluetooth,
> >> GNSS, GPS and MCU).
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >> ---
> >>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> >       From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml
>
> Eh, this is not trivial to solve. The
> "intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
> children nodes, just like spi-peripheral-props:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Yep, those properties probably need to go into mc-peripheral-props.yaml.

> Any node can be there:
> 1. serial, which was broken since beginning but errors not visible,

8250 only in all likelyhood.

> 2. flash, which work fine just because mtd-physmap.yaml allows it,
> 3. more?

I guess it is *only* external parallel bus devices...

>
> Existing DTS of this ixp4xx controller have different nodes, for example:
> flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:

'shared-dma-pool' is odd.

So is max6369. Looks like that h/w was creatively attached.

> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40
>
> Probably we need expansion-bus-controller-peripheral-props.yaml and
> include it in every possible child. Does it sound reasonable?

What's the difference to mc-peripheral-props.yaml?

Honestly, this stuff is somewhat rare that I'd rather worry about it
later. Maybe ixp4xx will be removed by then... We could just comment
out the problematic parts of the example for now.

Rob

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Tue, Jan 24, 2023 at 3:05 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 24/01/2023 00:05, Rob Herring wrote:
> >
> > On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> >> The re-usable serial.yaml schema matches every property with ".*"
> >> pattern, thus any other schema referencing it will not report unknown
> >> (unevaluated) properties.  This hides several wrong properties.  It is
> >> a limitation of dtschema, thus provide a simple workaround: expect
> >> children to be only of few names matching upstream usage (Bluetooth,
> >> GNSS, GPS and MCU).
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >> ---
> >>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> >       From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml
>
> Eh, this is not trivial to solve. The
> "intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
> children nodes, just like spi-peripheral-props:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Yep, those properties probably need to go into mc-peripheral-props.yaml.

> Any node can be there:
> 1. serial, which was broken since beginning but errors not visible,

8250 only in all likelyhood.

> 2. flash, which work fine just because mtd-physmap.yaml allows it,
> 3. more?

I guess it is *only* external parallel bus devices...

>
> Existing DTS of this ixp4xx controller have different nodes, for example:
> flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:

'shared-dma-pool' is odd.

So is max6369. Looks like that h/w was creatively attached.

> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40
>
> Probably we need expansion-bus-controller-peripheral-props.yaml and
> include it in every possible child. Does it sound reasonable?

What's the difference to mc-peripheral-props.yaml?

Honestly, this stuff is somewhat rare that I'd rather worry about it
later. Maybe ixp4xx will be removed by then... We could just comment
out the problematic parts of the example for now.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 11/13] dt-bindings: serial: restrict possible child node names

[Rob Herring]

On Tue, Jan 24, 2023 at 3:05 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 24/01/2023 00:05, Rob Herring wrote:
> >
> > On Mon, 23 Jan 2023 16:13:00 +0100, Krzysztof Kozlowski wrote:
> >> The re-usable serial.yaml schema matches every property with ".*"
> >> pattern, thus any other schema referencing it will not report unknown
> >> (unevaluated) properties.  This hides several wrong properties.  It is
> >> a limitation of dtschema, thus provide a simple workaround: expect
> >> children to be only of few names matching upstream usage (Bluetooth,
> >> GNSS, GPS and MCU).
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >> ---
> >>  Documentation/devicetree/bindings/serial/serial.yaml | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.example.dtb: serial@1,0: Unevaluated properties are not allowed ('intel,ixp4xx-eb-byte-access', 'intel,ixp4xx-eb-cycle-type', 'intel,ixp4xx-eb-t3', 'intel,ixp4xx-eb-write-enable' were unexpected)
> >       From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/8250.yaml
>
> Eh, this is not trivial to solve. The
> "intel,ixp4xx-expansion-bus-controller.yaml" bindings add properties to
> children nodes, just like spi-peripheral-props:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml?h=v6.2-rc5#n147

Yep, those properties probably need to go into mc-peripheral-props.yaml.

> Any node can be there:
> 1. serial, which was broken since beginning but errors not visible,

8250 only in all likelyhood.

> 2. flash, which work fine just because mtd-physmap.yaml allows it,
> 3. more?

I guess it is *only* external parallel bus devices...

>
> Existing DTS of this ixp4xx controller have different nodes, for example:
> flash, shared-dma-pool, ns8250, arcom,vulcan-gpio, maxim,max6369:

'shared-dma-pool' is odd.

So is max6369. Looks like that h/w was creatively attached.

> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts?h=v6.2-rc5#n40
>
> Probably we need expansion-bus-controller-peripheral-props.yaml and
> include it in every possible child. Does it sound reasonable?

What's the difference to mc-peripheral-props.yaml?

Honestly, this stuff is somewhat rare that I'd rather worry about it
later. Maybe ixp4xx will be removed by then... We could just comment
out the problematic parts of the example for now.

Rob

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic