All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 1/2] drm/msm: add support for QCM2290 MDSS
@ 2022-02-14 15:29 Loic Poulain
  2022-02-14 15:29 ` [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings Loic Poulain
  0 siblings, 1 reply; 6+ messages in thread
From: Loic Poulain @ 2022-02-14 15:29 UTC (permalink / raw)
  To: dmitry.baryshkov, robdclark, robh+dt
  Cc: linux-arm-msm, freedreno, devicetree, bjorn.andersson, Loic Poulain

Add compatibility for QCM2290 display subsystem, including
required entries in DPU hw catalog.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 v2: - Add BIT(DPU_SSPP_QOS_8LVL) to qcm2290 vig mask
     - drop qseed_type from dpu caps as there is no scaler
     - rename _QCM2290_VIG_SBLK to _VIG_SBLK_NOSCALE
     - Use sm8150_dspp_sblk instead of cloning it
     - Use sdm845_pp_sblk instead of cloning it
     - Use sdm845_vbif
 v3: no change (resent with reviewed-by + freedreno list)

 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 148 +++++++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c        |   1 +
 drivers/gpu/drm/msm/msm_drv.c                  |   1 +
 4 files changed, 151 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index aa75991..12392d0 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -25,6 +25,8 @@
 #define VIG_SM8250_MASK \
 	(VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))
 
+#define VIG_QCM2290_MASK (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL))
+
 #define DMA_SDM845_MASK \
 	(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\
 	BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
@@ -251,6 +253,17 @@ static const struct dpu_caps sc7280_dpu_caps = {
 	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
 };
 
+static const struct dpu_caps qcm2290_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0x4,
+	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2,
+	.ubwc_version = DPU_HW_UBWC_VER_20,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.max_linewidth = 2160,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
 static const struct dpu_mdp_cfg sdm845_mdp[] = {
 	{
 	.name = "top_0", .id = MDP_TOP,
@@ -336,6 +349,19 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
 	},
 };
 
+static const struct dpu_mdp_cfg qcm2290_mdp[] = {
+	{
+	.name = "top_0", .id = MDP_TOP,
+	.base = 0x0, .len = 0x494,
+	.features = 0,
+	.highest_bank_bit = 0x2,
+	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+		.reg_off = 0x2AC, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+		.reg_off = 0x2AC, .bit_off = 8},
+	},
+};
+
 /*************************************************************
  * CTL sub blocks config
  *************************************************************/
@@ -459,6 +485,15 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = {
 	},
 };
 
+static const struct dpu_ctl_cfg qcm2290_ctl[] = {
+	{
+	.name = "ctl_0", .id = CTL_0,
+	.base = 0x1000, .len = 0x1dc,
+	.features = BIT(DPU_CTL_ACTIVE_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	},
+};
+
 /*************************************************************
  * SSPP sub blocks config
  *************************************************************/
@@ -595,6 +630,30 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
 		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
 };
 
+
+#define _VIG_SBLK_NOSCALE(num, sdma_pri) \
+	{ \
+	.maxdwnscale = SSPP_UNITY_SCALE, \
+	.maxupscale = SSPP_UNITY_SCALE, \
+	.smart_dma_priority = sdma_pri, \
+	.src_blk = {.name = STRCAT("sspp_src_", num), \
+		.id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \
+	.format_list = plane_formats_yuv, \
+	.num_formats = ARRAY_SIZE(plane_formats_yuv), \
+	.virt_format_list = plane_formats, \
+	.virt_num_formats = ARRAY_SIZE(plane_formats), \
+	}
+
+static const struct dpu_sspp_sub_blks qcm2290_vig_sblk_0 = _VIG_SBLK_NOSCALE("0", 2);
+static const struct dpu_sspp_sub_blks qcm2290_dma_sblk_0 = _DMA_SBLK("8", 1);
+
+static const struct dpu_sspp_cfg qcm2290_sspp[] = {
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_QCM2290_MASK,
+		 qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
+		 qcm2290_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+};
+
 /*************************************************************
  * MIXER sub blocks config
  *************************************************************/
@@ -679,6 +738,21 @@ static const struct dpu_lm_cfg sc7280_lm[] = {
 		&sc7180_lm_sblk, PINGPONG_3, LM_2, 0),
 };
 
+/* QCM2290 */
+
+static const struct dpu_lm_sub_blks qcm2290_lm_sblk = {
+	.maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.maxblendstages = 4, /* excluding base layer */
+	.blendstage_base = { /* offsets relative to mixer base */
+		0x20, 0x38, 0x50, 0x68
+	},
+};
+
+static const struct dpu_lm_cfg qcm2290_lm[] = {
+	LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK,
+		&qcm2290_lm_sblk, PINGPONG_0, 0, DSPP_0),
+};
+
 /*************************************************************
  * DSPP sub blocks config
  *************************************************************/
@@ -716,6 +790,11 @@ static const struct dpu_dspp_cfg sm8150_dspp[] = {
 		 &sm8150_dspp_sblk),
 };
 
+static const struct dpu_dspp_cfg qcm2290_dspp[] = {
+	DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+		 &sm8150_dspp_sblk),
+};
+
 /*************************************************************
  * PINGPONG sub blocks config
  *************************************************************/
@@ -798,6 +877,12 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = {
 			-1),
 };
 
+static struct dpu_pingpong_cfg qcm2290_pp[] = {
+	PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, sdm845_pp_sblk,
+		DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+		DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)),
+};
+
 /*************************************************************
  * MERGE_3D sub blocks config
  *************************************************************/
@@ -861,6 +946,11 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
 	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
 };
 
+static const struct dpu_intf_cfg qcm2290_intf[] = {
+	INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
+	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+};
+
 /*************************************************************
  * VBIF sub blocks config
  *************************************************************/
@@ -931,6 +1021,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
 	{.fl = 0, .lut = 0x0011222222223357 },
 };
 
+static const struct dpu_qos_lut_entry qcm2290_qos_linear[] = {
+	{.fl = 0, .lut = 0x0011222222335777},
+};
+
 static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
 	{.fl = 10, .lut = 0x344556677},
 	{.fl = 11, .lut = 0x3344556677},
@@ -1102,6 +1196,27 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
 	.bw_inefficiency_factor = 120,
 };
 
+static const struct dpu_perf_cfg qcm2290_perf_data = {
+	.max_bw_low = 2700000,
+	.max_bw_high = 2700000,
+	.min_core_ib = 1300000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 1600000,
+	.min_prefill_lines = 24,
+	.danger_lut_tbl = {0xff, 0x0, 0x0},
+	.safe_lut_tbl = {0xfff0, 0x0, 0x0},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(qcm2290_qos_linear),
+		.entries = qcm2290_qos_linear
+		},
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
 /*************************************************************
  * Hardware catalog init
  *************************************************************/
@@ -1255,6 +1370,38 @@ static void sc7280_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
 	};
 }
 
+
+/*
+ * qcm2290_cfg_init(): populate qcm2290 dpu sub-blocks reg offsets
+ * and instance counts.
+ */
+static void qcm2290_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
+{
+	*dpu_cfg = (struct dpu_mdss_cfg){
+		.caps = &qcm2290_dpu_caps,
+		.mdp_count = ARRAY_SIZE(qcm2290_mdp),
+		.mdp = qcm2290_mdp,
+		.ctl_count = ARRAY_SIZE(qcm2290_ctl),
+		.ctl = qcm2290_ctl,
+		.sspp_count = ARRAY_SIZE(qcm2290_sspp),
+		.sspp = qcm2290_sspp,
+		.mixer_count = ARRAY_SIZE(qcm2290_lm),
+		.mixer = qcm2290_lm,
+		.dspp_count = ARRAY_SIZE(qcm2290_dspp),
+		.dspp = qcm2290_dspp,
+		.pingpong_count = ARRAY_SIZE(qcm2290_pp),
+		.pingpong = qcm2290_pp,
+		.intf_count = ARRAY_SIZE(qcm2290_intf),
+		.intf = qcm2290_intf,
+		.vbif_count = ARRAY_SIZE(sdm845_vbif),
+		.vbif = sdm845_vbif,
+		.reg_dma_count = 1,
+		.dma_cfg = sdm845_regdma,
+		.perf = qcm2290_perf_data,
+		.mdss_irqs = IRQ_SC7180_MASK,
+	};
+}
+
 static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
 	{ .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init},
 	{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
@@ -1262,6 +1409,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
 	{ .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
 	{ .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
 	{ .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
+	{ .hw_rev = DPU_HW_VER_650, .cfg_init = qcm2290_cfg_init},
 	{ .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 31af04a..5b31392 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -41,6 +41,7 @@
 #define DPU_HW_VER_501	DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
 #define DPU_HW_VER_600	DPU_HW_VER(6, 0, 0) /* sm8250 */
 #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
+#define DPU_HW_VER_650	DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
 #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
 
 #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 47fe11a..b816a50 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1348,6 +1348,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
 };
 
 const struct of_device_id dpu_dt_match[] = {
+	{ .compatible = "qcom,qcm2290-dpu", },
 	{ .compatible = "qcom,sdm845-dpu", },
 	{ .compatible = "qcom,sc7180-dpu", },
 	{ .compatible = "qcom,sc7280-dpu", },
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index ad35a5d..c8ab6eb 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1438,6 +1438,7 @@ static void msm_pdev_shutdown(struct platform_device *pdev)
 static const struct of_device_id dt_match[] = {
 	{ .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
 	{ .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
+	{ .compatible = "qcom,qcm2290-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
 	{ .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings
  2022-02-14 15:29 [PATCH v3 1/2] drm/msm: add support for QCM2290 MDSS Loic Poulain
@ 2022-02-14 15:29 ` Loic Poulain
  2022-02-22 21:49   ` Rob Herring
  2022-03-01 17:35   ` Rob Herring
  0 siblings, 2 replies; 6+ messages in thread
From: Loic Poulain @ 2022-02-14 15:29 UTC (permalink / raw)
  To: dmitry.baryshkov, robdclark, robh+dt
  Cc: linux-arm-msm, freedreno, devicetree, bjorn.andersson, Loic Poulain

QCM2290 MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema for DPU device
tree bindings

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 v2: no change
 v3: no change (resent with reviewed-by + freedreno list)

 .../bindings/display/msm/dpu-qcm2290.yaml          | 214 +++++++++++++++++++++
 1 file changed, 214 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
new file mode 100644
index 00000000..8766b13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for QCM2290 target
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  and DPU are mentioned for QCM2290 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qcm2290-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  interconnects:
+    items:
+      - description: Interconnect path specifying the port ids for data bus
+
+  interconnect-names:
+    const: mdp0-mem
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,qcm2290-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display AXI clock from gcc
+          - description: Display AHB clock from dispcc
+          - description: Display core clock from dispcc
+          - description: Display lut clock from dispcc
+          - description: Display vsync clock from dispcc
+
+      clock-names:
+        items:
+          - const: bus
+          - const: iface
+          - const: core
+          - const: lut
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+        required:
+          - port@0
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss: mdss@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,qcm2290-mdss", "qcom,mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        mdss_mdp: mdp@5e01000 {
+                compatible = "qcom,qcm2290-dpu";
+                reg = <0x05e01000 0x8f000>,
+                      <0x05eb0000 0x2008>;
+                reg-names = "mdp", "vbif";
+
+                clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                         <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                         <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                         <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                         <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                clock-names = "bus", "iface", "core", "lut", "vsync";
+
+                operating-points-v2 = <&mdp_opp_table>;
+                power-domains = <&rpmpd QCM2290_VDDCX>;
+
+                interrupt-parent = <&mdss>;
+                interrupts = <0 IRQ_TYPE_NONE>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                                reg = <0>;
+                                dpu_intf1_out: endpoint {
+                                        remote-endpoint = <&dsi0_in>;
+                                };
+                        };
+                 };
+         };
+...
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings
  2022-02-14 15:29 ` [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings Loic Poulain
@ 2022-02-22 21:49   ` Rob Herring
  2022-03-01 17:35   ` Rob Herring
  1 sibling, 0 replies; 6+ messages in thread
From: Rob Herring @ 2022-02-22 21:49 UTC (permalink / raw)
  To: Loic Poulain
  Cc: robdclark, freedreno, devicetree, linux-arm-msm,
	dmitry.baryshkov, robh+dt, bjorn.andersson

On Mon, 14 Feb 2022 16:29:07 +0100, Loic Poulain wrote:
> QCM2290 MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema for DPU device
> tree bindings
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
>  v2: no change
>  v3: no change (resent with reviewed-by + freedreno list)
> 
>  .../bindings/display/msm/dpu-qcm2290.yaml          | 214 +++++++++++++++++++++
>  1 file changed, 214 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings
  2022-02-14 15:29 ` [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings Loic Poulain
  2022-02-22 21:49   ` Rob Herring
@ 2022-03-01 17:35   ` Rob Herring
  2022-03-01 23:23     ` Dmitry Baryshkov
  1 sibling, 1 reply; 6+ messages in thread
From: Rob Herring @ 2022-03-01 17:35 UTC (permalink / raw)
  To: Loic Poulain
  Cc: Dmitry Baryshkov, Rob Clark, linux-arm-msm, freedreno,
	devicetree, Bjorn Andersson

On Mon, Feb 14, 2022 at 9:29 AM Loic Poulain <loic.poulain@linaro.org> wrote:
>
> QCM2290 MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema for DPU device
> tree bindings
>
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
>  v2: no change
>  v3: no change (resent with reviewed-by + freedreno list)
>
>  .../bindings/display/msm/dpu-qcm2290.yaml          | 214 +++++++++++++++++++++
>  1 file changed, 214 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml

This is now failing in linux-next. Please fix or revert:

Error: Documentation/devicetree/bindings/display/msm/dpu-qcm2290.example.dts:81.3-82.1
syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:386:
Documentation/devicetree/bindings/display/msm/dpu-qcm2290.example.dt.yaml]
Error 1

Rob

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings
  2022-03-01 17:35   ` Rob Herring
@ 2022-03-01 23:23     ` Dmitry Baryshkov
  2022-03-01 23:28       ` Dmitry Baryshkov
  0 siblings, 1 reply; 6+ messages in thread
From: Dmitry Baryshkov @ 2022-03-01 23:23 UTC (permalink / raw)
  To: Rob Herring
  Cc: Loic Poulain, Rob Clark, linux-arm-msm, freedreno, devicetree,
	Bjorn Andersson

On Tue, 1 Mar 2022 at 20:35, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Feb 14, 2022 at 9:29 AM Loic Poulain <loic.poulain@linaro.org> wrote:
> >
> > QCM2290 MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> > like DPU display controller, DSI etc. Add YAML schema for DPU device
> > tree bindings
> >
> > Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> > ---
> >  v2: no change
> >  v3: no change (resent with reviewed-by + freedreno list)
> >
> >  .../bindings/display/msm/dpu-qcm2290.yaml          | 214 +++++++++++++++++++++
> >  1 file changed, 214 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
>
> This is now failing in linux-next. Please fix or revert:

I can not reproduce it here, with the linux-next from 20220301 and
dtschema 2022.1

>
> Error: Documentation/devicetree/bindings/display/msm/dpu-qcm2290.example.dts:81.3-82.1
> syntax error
> FATAL ERROR: Unable to parse input tree
> make[1]: *** [scripts/Makefile.lib:386:
> Documentation/devicetree/bindings/display/msm/dpu-qcm2290.example.dt.yaml]
> Error 1
>
> Rob



-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings
  2022-03-01 23:23     ` Dmitry Baryshkov
@ 2022-03-01 23:28       ` Dmitry Baryshkov
  0 siblings, 0 replies; 6+ messages in thread
From: Dmitry Baryshkov @ 2022-03-01 23:28 UTC (permalink / raw)
  To: Rob Herring
  Cc: Loic Poulain, Rob Clark, linux-arm-msm, freedreno, devicetree,
	Bjorn Andersson

On Wed, 2 Mar 2022 at 02:23, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Tue, 1 Mar 2022 at 20:35, Rob Herring <robh@kernel.org> wrote:
> >
> > On Mon, Feb 14, 2022 at 9:29 AM Loic Poulain <loic.poulain@linaro.org> wrote:
> > >
> > > QCM2290 MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
> > > like DPU display controller, DSI etc. Add YAML schema for DPU device
> > > tree bindings
> > >
> > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> > > ---
> > >  v2: no change
> > >  v3: no change (resent with reviewed-by + freedreno list)
> > >
> > >  .../bindings/display/msm/dpu-qcm2290.yaml          | 214 +++++++++++++++++++++
> > >  1 file changed, 214 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
> >
> > This is now failing in linux-next. Please fix or revert:
>
> I can not reproduce it here, with the linux-next from 20220301 and
> dtschema 2022.1

Ugh. Excuse me. Reproduced the issue.

>
> >
> > Error: Documentation/devicetree/bindings/display/msm/dpu-qcm2290.example.dts:81.3-82.1
> > syntax error
> > FATAL ERROR: Unable to parse input tree
> > make[1]: *** [scripts/Makefile.lib:386:
> > Documentation/devicetree/bindings/display/msm/dpu-qcm2290.example.dt.yaml]
> > Error 1
> >
> > Rob
>
>
>
> --
> With best wishes
> Dmitry



-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-03-01 23:28 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-14 15:29 [PATCH v3 1/2] drm/msm: add support for QCM2290 MDSS Loic Poulain
2022-02-14 15:29 ` [PATCH v3 2/2] dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings Loic Poulain
2022-02-22 21:49   ` Rob Herring
2022-03-01 17:35   ` Rob Herring
2022-03-01 23:23     ` Dmitry Baryshkov
2022-03-01 23:28       ` Dmitry Baryshkov

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.