* [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg
@ 2018-08-23 3:01 Kever Yang
2018-09-06 8:03 ` Peter Robinson
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Kever Yang @ 2018-08-23 3:01 UTC (permalink / raw)
To: u-boot
Patch fix warning:
/builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \
arch/arm/dts/rk3399-firefly.dtb > u-boot.its
./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat
/dev/null
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot at 1
has a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 1 has
a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 2 has
a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 3 has
a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt at 1 has
a unit name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node
/configurations/config at 1 has a unit name, but no reg property
make[1]: Leaving directory
'/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399'
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---
arch/arm/mach-rockchip/make_fit_atf.py | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py
index 6b3d9201c9..62b9caee34 100755
--- a/arch/arm/mach-rockchip/make_fit_atf.py
+++ b/arch/arm/mach-rockchip/make_fit_atf.py
@@ -34,7 +34,7 @@ DT_HEADER="""// SPDX-License-Identifier: GPL-2.0+ OR X11
#address-cells = <1>;
images {
- uboot at 1 {
+ uboot {
description = "U-Boot (64-bit)";
data = /incbin/("u-boot-nodtb.bin");
type = "standalone";
@@ -58,7 +58,7 @@ def append_atf_node(file, atf_index, phy_addr):
Append ATF DT node to input FIT dts file.
"""
data = 'bl31_0x%08x.bin' % phy_addr
- print >> file, '\t\tatf@%d {' % atf_index
+ print >> file, '\t\tatf_%d {' % atf_index
print >> file, '\t\t\tdescription = \"ARM Trusted Firmware\";'
print >> file, '\t\t\tdata = /incbin/("%s");' % data
print >> file, '\t\t\ttype = "firmware";'
@@ -78,7 +78,7 @@ def append_fdt_node(file, dtbs):
cnt = 1
for dtb in dtbs:
dtname = os.path.basename(dtb)
- print >> file, '\t\tfdt@%d {' % cnt
+ print >> file, '\t\tfdt_%d {' % cnt
print >> file, '\t\t\tdescription = "%s";' % dtname
print >> file, '\t\t\tdata = /incbin/("%s");' % dtb
print >> file, '\t\t\ttype = "flat_dt";'
@@ -88,17 +88,17 @@ def append_fdt_node(file, dtbs):
cnt = cnt + 1
def append_conf_section(file, cnt, dtname, atf_cnt):
- print >> file, '\t\tconfig@%d {' % cnt
+ print >> file, '\t\tconfig_%d {' % cnt
print >> file, '\t\t\tdescription = "%s";' % dtname
- print >> file, '\t\t\tfirmware = "atf at 1";'
- print >> file, '\t\t\tloadables = "uboot at 1",',
+ print >> file, '\t\t\tfirmware = "atf_1";'
+ print >> file, '\t\t\tloadables = "uboot",',
for i in range(1, atf_cnt):
- print >> file, '"atf@%d"' % (i+1),
+ print >> file, '"atf_%d"' % (i+1),
if i != (atf_cnt - 1):
print >> file, ',',
else:
print >> file, ';'
- print >> file, '\t\t\tfdt = "fdt at 1";'
+ print >> file, '\t\t\tfdt = "fdt_1";'
print >> file, '\t\t};'
print >> file, ''
@@ -108,7 +108,7 @@ def append_conf_node(file, dtbs, atf_cnt):
"""
cnt = 1
print >> file, '\tconfigurations {'
- print >> file, '\t\tdefault = "config at 1";'
+ print >> file, '\t\tdefault = "config_1";'
for dtb in dtbs:
dtname = os.path.basename(dtb)
append_conf_section(file, cnt, dtname, atf_cnt)
--
2.18.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg
2018-08-23 3:01 [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Kever Yang
@ 2018-09-06 8:03 ` Peter Robinson
2018-10-03 18:55 ` Peter Robinson
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Peter Robinson @ 2018-09-06 8:03 UTC (permalink / raw)
To: u-boot
On Thu, Aug 23, 2018 at 4:01 AM Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Patch fix warning:
> /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \
> arch/arm/dts/rk3399-firefly.dtb > u-boot.its
> ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat
> /dev/null
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot at 1
> has a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 2 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 3 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node
> /configurations/config at 1 has a unit name, but no reg property
> make[1]: Leaving directory
> '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399'
>
> Reported-by: Peter Robinson <pbrobinson@gmail.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Apologies, I thought I had tested and provided by tested by for this.
LGTM on the newer dtc
Peter
> ---
>
> arch/arm/mach-rockchip/make_fit_atf.py | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py
> index 6b3d9201c9..62b9caee34 100755
> --- a/arch/arm/mach-rockchip/make_fit_atf.py
> +++ b/arch/arm/mach-rockchip/make_fit_atf.py
> @@ -34,7 +34,7 @@ DT_HEADER="""// SPDX-License-Identifier: GPL-2.0+ OR X11
> #address-cells = <1>;
>
> images {
> - uboot at 1 {
> + uboot {
> description = "U-Boot (64-bit)";
> data = /incbin/("u-boot-nodtb.bin");
> type = "standalone";
> @@ -58,7 +58,7 @@ def append_atf_node(file, atf_index, phy_addr):
> Append ATF DT node to input FIT dts file.
> """
> data = 'bl31_0x%08x.bin' % phy_addr
> - print >> file, '\t\tatf@%d {' % atf_index
> + print >> file, '\t\tatf_%d {' % atf_index
> print >> file, '\t\t\tdescription = \"ARM Trusted Firmware\";'
> print >> file, '\t\t\tdata = /incbin/("%s");' % data
> print >> file, '\t\t\ttype = "firmware";'
> @@ -78,7 +78,7 @@ def append_fdt_node(file, dtbs):
> cnt = 1
> for dtb in dtbs:
> dtname = os.path.basename(dtb)
> - print >> file, '\t\tfdt@%d {' % cnt
> + print >> file, '\t\tfdt_%d {' % cnt
> print >> file, '\t\t\tdescription = "%s";' % dtname
> print >> file, '\t\t\tdata = /incbin/("%s");' % dtb
> print >> file, '\t\t\ttype = "flat_dt";'
> @@ -88,17 +88,17 @@ def append_fdt_node(file, dtbs):
> cnt = cnt + 1
>
> def append_conf_section(file, cnt, dtname, atf_cnt):
> - print >> file, '\t\tconfig@%d {' % cnt
> + print >> file, '\t\tconfig_%d {' % cnt
> print >> file, '\t\t\tdescription = "%s";' % dtname
> - print >> file, '\t\t\tfirmware = "atf at 1";'
> - print >> file, '\t\t\tloadables = "uboot at 1",',
> + print >> file, '\t\t\tfirmware = "atf_1";'
> + print >> file, '\t\t\tloadables = "uboot",',
> for i in range(1, atf_cnt):
> - print >> file, '"atf@%d"' % (i+1),
> + print >> file, '"atf_%d"' % (i+1),
> if i != (atf_cnt - 1):
> print >> file, ',',
> else:
> print >> file, ';'
> - print >> file, '\t\t\tfdt = "fdt at 1";'
> + print >> file, '\t\t\tfdt = "fdt_1";'
> print >> file, '\t\t};'
> print >> file, ''
>
> @@ -108,7 +108,7 @@ def append_conf_node(file, dtbs, atf_cnt):
> """
> cnt = 1
> print >> file, '\tconfigurations {'
> - print >> file, '\t\tdefault = "config at 1";'
> + print >> file, '\t\tdefault = "config_1";'
> for dtb in dtbs:
> dtname = os.path.basename(dtb)
> append_conf_section(file, cnt, dtname, atf_cnt)
> --
> 2.18.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg
2018-08-23 3:01 [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Kever Yang
2018-09-06 8:03 ` Peter Robinson
@ 2018-10-03 18:55 ` Peter Robinson
2018-10-03 18:57 ` Philipp Tomsich
2018-10-03 18:58 ` Philipp Tomsich
2018-10-04 20:08 ` [U-Boot] [U-Boot, RESENT] " Philipp Tomsich
3 siblings, 1 reply; 6+ messages in thread
From: Peter Robinson @ 2018-10-03 18:55 UTC (permalink / raw)
To: u-boot
Philipp,
Can we get this one applied to Rockchips too please?
Peter
On Thu, Aug 23, 2018 at 4:01 AM Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Patch fix warning:
> /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \
> arch/arm/dts/rk3399-firefly.dtb > u-boot.its
> ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat
> /dev/null
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot at 1
> has a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 2 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 3 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node
> /configurations/config at 1 has a unit name, but no reg property
> make[1]: Leaving directory
> '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399'
>
> Reported-by: Peter Robinson <pbrobinson@gmail.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> ---
>
> arch/arm/mach-rockchip/make_fit_atf.py | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py
> index 6b3d9201c9..62b9caee34 100755
> --- a/arch/arm/mach-rockchip/make_fit_atf.py
> +++ b/arch/arm/mach-rockchip/make_fit_atf.py
> @@ -34,7 +34,7 @@ DT_HEADER="""// SPDX-License-Identifier: GPL-2.0+ OR X11
> #address-cells = <1>;
>
> images {
> - uboot at 1 {
> + uboot {
> description = "U-Boot (64-bit)";
> data = /incbin/("u-boot-nodtb.bin");
> type = "standalone";
> @@ -58,7 +58,7 @@ def append_atf_node(file, atf_index, phy_addr):
> Append ATF DT node to input FIT dts file.
> """
> data = 'bl31_0x%08x.bin' % phy_addr
> - print >> file, '\t\tatf@%d {' % atf_index
> + print >> file, '\t\tatf_%d {' % atf_index
> print >> file, '\t\t\tdescription = \"ARM Trusted Firmware\";'
> print >> file, '\t\t\tdata = /incbin/("%s");' % data
> print >> file, '\t\t\ttype = "firmware";'
> @@ -78,7 +78,7 @@ def append_fdt_node(file, dtbs):
> cnt = 1
> for dtb in dtbs:
> dtname = os.path.basename(dtb)
> - print >> file, '\t\tfdt@%d {' % cnt
> + print >> file, '\t\tfdt_%d {' % cnt
> print >> file, '\t\t\tdescription = "%s";' % dtname
> print >> file, '\t\t\tdata = /incbin/("%s");' % dtb
> print >> file, '\t\t\ttype = "flat_dt";'
> @@ -88,17 +88,17 @@ def append_fdt_node(file, dtbs):
> cnt = cnt + 1
>
> def append_conf_section(file, cnt, dtname, atf_cnt):
> - print >> file, '\t\tconfig@%d {' % cnt
> + print >> file, '\t\tconfig_%d {' % cnt
> print >> file, '\t\t\tdescription = "%s";' % dtname
> - print >> file, '\t\t\tfirmware = "atf at 1";'
> - print >> file, '\t\t\tloadables = "uboot at 1",',
> + print >> file, '\t\t\tfirmware = "atf_1";'
> + print >> file, '\t\t\tloadables = "uboot",',
> for i in range(1, atf_cnt):
> - print >> file, '"atf@%d"' % (i+1),
> + print >> file, '"atf_%d"' % (i+1),
> if i != (atf_cnt - 1):
> print >> file, ',',
> else:
> print >> file, ';'
> - print >> file, '\t\t\tfdt = "fdt at 1";'
> + print >> file, '\t\t\tfdt = "fdt_1";'
> print >> file, '\t\t};'
> print >> file, ''
>
> @@ -108,7 +108,7 @@ def append_conf_node(file, dtbs, atf_cnt):
> """
> cnt = 1
> print >> file, '\tconfigurations {'
> - print >> file, '\t\tdefault = "config at 1";'
> + print >> file, '\t\tdefault = "config_1";'
> for dtb in dtbs:
> dtname = os.path.basename(dtb)
> append_conf_section(file, cnt, dtname, atf_cnt)
> --
> 2.18.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg
2018-10-03 18:55 ` Peter Robinson
@ 2018-10-03 18:57 ` Philipp Tomsich
0 siblings, 0 replies; 6+ messages in thread
From: Philipp Tomsich @ 2018-10-03 18:57 UTC (permalink / raw)
To: u-boot
Sure. This one fell through the cracks. No idea why I didn’t see it.
> On 03.10.2018, at 20:55, Peter Robinson <pbrobinson@gmail.com> wrote:
>
> Philipp,
>
> Can we get this one applied to Rockchips too please?
>
> Peter
>
> On Thu, Aug 23, 2018 at 4:01 AM Kever Yang <kever.yang@rock-chips.com> wrote:
>>
>> Patch fix warning:
>> /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \
>> arch/arm/dts/rk3399-firefly.dtb > u-boot.its
>> ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat
>> /dev/null
>> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot at 1
>> has a unit name, but no reg property
>> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 1 has
>> a unit name, but no reg property
>> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 2 has
>> a unit name, but no reg property
>> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 3 has
>> a unit name, but no reg property
>> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt at 1 has
>> a unit name, but no reg property
>> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node
>> /configurations/config at 1 has a unit name, but no reg property
>> make[1]: Leaving directory
>> '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399'
>>
>> Reported-by: Peter Robinson <pbrobinson@gmail.com>
>> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>> ---
>>
>> arch/arm/mach-rockchip/make_fit_atf.py | 18 +++++++++---------
>> 1 file changed, 9 insertions(+), 9 deletions(-)
>>
>> diff --git a/arch/arm/mach-rockchip/make_fit_atf.py b/arch/arm/mach-rockchip/make_fit_atf.py
>> index 6b3d9201c9..62b9caee34 100755
>> --- a/arch/arm/mach-rockchip/make_fit_atf.py
>> +++ b/arch/arm/mach-rockchip/make_fit_atf.py
>> @@ -34,7 +34,7 @@ DT_HEADER="""// SPDX-License-Identifier: GPL-2.0+ OR X11
>> #address-cells = <1>;
>>
>> images {
>> - uboot at 1 {
>> + uboot {
>> description = "U-Boot (64-bit)";
>> data = /incbin/("u-boot-nodtb.bin");
>> type = "standalone";
>> @@ -58,7 +58,7 @@ def append_atf_node(file, atf_index, phy_addr):
>> Append ATF DT node to input FIT dts file.
>> """
>> data = 'bl31_0x%08x.bin' % phy_addr
>> - print >> file, '\t\tatf@%d {' % atf_index
>> + print >> file, '\t\tatf_%d {' % atf_index
>> print >> file, '\t\t\tdescription = \"ARM Trusted Firmware\";'
>> print >> file, '\t\t\tdata = /incbin/("%s");' % data
>> print >> file, '\t\t\ttype = "firmware";'
>> @@ -78,7 +78,7 @@ def append_fdt_node(file, dtbs):
>> cnt = 1
>> for dtb in dtbs:
>> dtname = os.path.basename(dtb)
>> - print >> file, '\t\tfdt@%d {' % cnt
>> + print >> file, '\t\tfdt_%d {' % cnt
>> print >> file, '\t\t\tdescription = "%s";' % dtname
>> print >> file, '\t\t\tdata = /incbin/("%s");' % dtb
>> print >> file, '\t\t\ttype = "flat_dt";'
>> @@ -88,17 +88,17 @@ def append_fdt_node(file, dtbs):
>> cnt = cnt + 1
>>
>> def append_conf_section(file, cnt, dtname, atf_cnt):
>> - print >> file, '\t\tconfig@%d {' % cnt
>> + print >> file, '\t\tconfig_%d {' % cnt
>> print >> file, '\t\t\tdescription = "%s";' % dtname
>> - print >> file, '\t\t\tfirmware = "atf at 1";'
>> - print >> file, '\t\t\tloadables = "uboot at 1",',
>> + print >> file, '\t\t\tfirmware = "atf_1";'
>> + print >> file, '\t\t\tloadables = "uboot",',
>> for i in range(1, atf_cnt):
>> - print >> file, '"atf@%d"' % (i+1),
>> + print >> file, '"atf_%d"' % (i+1),
>> if i != (atf_cnt - 1):
>> print >> file, ',',
>> else:
>> print >> file, ';'
>> - print >> file, '\t\t\tfdt = "fdt at 1";'
>> + print >> file, '\t\t\tfdt = "fdt_1";'
>> print >> file, '\t\t};'
>> print >> file, ''
>>
>> @@ -108,7 +108,7 @@ def append_conf_node(file, dtbs, atf_cnt):
>> """
>> cnt = 1
>> print >> file, '\tconfigurations {'
>> - print >> file, '\t\tdefault = "config at 1";'
>> + print >> file, '\t\tdefault = "config_1";'
>> for dtb in dtbs:
>> dtname = os.path.basename(dtb)
>> append_conf_section(file, cnt, dtname, atf_cnt)
>> --
>> 2.18.0
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg
2018-08-23 3:01 [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Kever Yang
2018-09-06 8:03 ` Peter Robinson
2018-10-03 18:55 ` Peter Robinson
@ 2018-10-03 18:58 ` Philipp Tomsich
2018-10-04 20:08 ` [U-Boot] [U-Boot, RESENT] " Philipp Tomsich
3 siblings, 0 replies; 6+ messages in thread
From: Philipp Tomsich @ 2018-10-03 18:58 UTC (permalink / raw)
To: u-boot
> On 23.08.2018, at 05:01, Kever Yang <kever.yang@rock-chips.com> wrote:
>
> Patch fix warning:
> /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \
> arch/arm/dts/rk3399-firefly.dtb > u-boot.its
> ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat
> /dev/null
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot at 1
> has a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 2 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 3 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node
> /configurations/config at 1 has a unit name, but no reg property
> make[1]: Leaving directory
> '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399'
>
> Reported-by: Peter Robinson <pbrobinson@gmail.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, RESENT] rockchip: make_fit_atf: fix warning unit_address_vs_reg
2018-08-23 3:01 [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Kever Yang
` (2 preceding siblings ...)
2018-10-03 18:58 ` Philipp Tomsich
@ 2018-10-04 20:08 ` Philipp Tomsich
3 siblings, 0 replies; 6+ messages in thread
From: Philipp Tomsich @ 2018-10-04 20:08 UTC (permalink / raw)
To: u-boot
> Patch fix warning:
> /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \
> arch/arm/dts/rk3399-firefly.dtb > u-boot.its
> ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat
> /dev/null
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot at 1
> has a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 2 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf at 3 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt at 1 has
> a unit name, but no reg property
> u-boot.itb.tmp: Warning (unit_address_vs_reg): Node
> /configurations/config at 1 has a unit name, but no reg property
> make[1]: Leaving directory
> '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399'
>
> Reported-by: Peter Robinson <pbrobinson@gmail.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> Tested-by: Peter Robinson <pbrobinson@gmail.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> ---
>
> arch/arm/mach-rockchip/make_fit_atf.py | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
Applied to u-boot-rockchip, thanks!
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-10-04 20:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-23 3:01 [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg Kever Yang
2018-09-06 8:03 ` Peter Robinson
2018-10-03 18:55 ` Peter Robinson
2018-10-03 18:57 ` Philipp Tomsich
2018-10-03 18:58 ` Philipp Tomsich
2018-10-04 20:08 ` [U-Boot] [U-Boot, RESENT] " Philipp Tomsich
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.