* [PATCH v2 0/3] AArch64: KGDB support
@ 2013-09-30 9:44 vijay.kilari at gmail.com
2013-09-30 9:44 ` [PATCH v2 1/3] AArch64: Add single-step and breakpoint handler hooks vijay.kilari at gmail.com
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: vijay.kilari at gmail.com @ 2013-09-30 9:44 UTC (permalink / raw)
To: linux-arm-kernel
From: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Based on the step-handler and break-handler hooks patch from
Sandeepa (Patch 1), KGDB debugging support is added for EL1
debug in AArch64 mode. Any updates that come for Patch 1 from
Sandeepa will be rebased in next version
With first patch,register layout is updated to be inline with GDB tool.
Basic GDB connection, break point set/clear and info commands
are supported except step/next debugging
With second patch, step/next debugging support is added, where in
pc is updated to point to the instruction to be stepped and
stopped.
v2:
- Moved break instruction encoding to debug-monitors.h file
- Fixed endianess of compile break instruction encoding
- Updated I/O buffer sizes
- Updated register buffer size
- Remove changes to debug_exception handler in entry.S for
- ELR update and step debugging with update pc instead of ELR
- Rebased against AArch64 upstream kernel
v1:
- Initial patch-set
Tested with Aarch64 GDB tool chain on simulator
Sandeepa Prabhu (1):
AArch64: Add single-step and breakpoint handler hooks
Vijaya Kumar K (2):
AArch64: KGDB: Add Basic KGDB support
AArch64: KGDB: Add step debugging support
arch/arm64/include/asm/debug-monitors.h | 30 +++
arch/arm64/include/asm/kgdb.h | 81 ++++++++
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/debug-monitors.c | 95 ++++++++-
arch/arm64/kernel/entry.S | 6 +-
arch/arm64/kernel/kgdb.c | 341 +++++++++++++++++++++++++++++++
6 files changed, 550 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/include/asm/kgdb.h
create mode 100644 arch/arm64/kernel/kgdb.c
--
1.7.9.5
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 1/3] AArch64: Add single-step and breakpoint handler hooks 2013-09-30 9:44 [PATCH v2 0/3] AArch64: KGDB support vijay.kilari at gmail.com @ 2013-09-30 9:44 ` vijay.kilari at gmail.com 2013-09-30 9:44 ` [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support vijay.kilari at gmail.com 2013-09-30 9:44 ` [PATCH v2 3/3] AArch64: KGDB: Add step debugging support vijay.kilari at gmail.com 2 siblings, 0 replies; 11+ messages in thread From: vijay.kilari at gmail.com @ 2013-09-30 9:44 UTC (permalink / raw) To: linux-arm-kernel From: Sandeepa Prabhu <sandeepa.prabhu@linaro.org> AArch64 Single Steping and Breakpoint debug exceptions will be used by multiple debug framworks like kprobes & kgdb. This patch implements the hooks for those frameworks to register their own handlers for handling breakpoint and single step events. Reworked the debug exception handler in entry.S: do_dbg to pass the correct break/step address to the handlers, i.e. FAR_EL1 if exception is watchpoint, ELR_EL1 for all other debug exceptions. Signed-off-by: Sandeepa Prabhu <sandeepa.prabhu@linaro.org> Signed-off-by: Deepak Saxena <dsaxena@linaro.org> --- arch/arm64/include/asm/debug-monitors.h | 20 +++++++ arch/arm64/kernel/debug-monitors.c | 95 ++++++++++++++++++++++++++++++- arch/arm64/kernel/entry.S | 6 +- 3 files changed, 117 insertions(+), 4 deletions(-) diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index a2232d0..19e429e 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -16,6 +16,8 @@ #ifndef __ASM_DEBUG_MONITORS_H #define __ASM_DEBUG_MONITORS_H +#include <linux/list.h> + #ifdef __KERNEL__ #define DBG_ESR_EVT(x) (((x) >> 27) & 0x7) @@ -62,6 +64,24 @@ struct task_struct; #define DBG_ARCH_ID_RESERVED 0 /* In case of ptrace ABI updates. */ +struct step_hook { + struct list_head node; + int (*fn)(struct pt_regs *regs, unsigned int esr, unsigned long addr); +}; + +void register_step_hook(struct step_hook *hook); +void unregister_step_hook(struct step_hook *hook); + +struct break_hook { + struct list_head node; + u32 esr_val; + u32 esr_mask; + int (*fn)(struct pt_regs *regs, unsigned int esr, unsigned long addr); +}; + +void register_break_hook(struct break_hook *hook); +void unregister_break_hook(struct break_hook *hook); + u8 debug_monitors_arch(void); void enable_debug_monitors(enum debug_el el); diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index cbfacf7..d8a159e 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -188,6 +188,52 @@ static void clear_regs_spsr_ss(struct pt_regs *regs) regs->pstate = spsr; } +/* EL1 Single Step Handler hooks */ +static LIST_HEAD(step_hook); +static DEFINE_RAW_SPINLOCK(step_lock); + +void register_step_hook(struct step_hook *hook) +{ + raw_spin_lock(&step_lock); + list_add(&hook->node, &step_hook); + raw_spin_unlock(&step_lock); +} + +void unregister_step_hook(struct step_hook *hook) +{ + raw_spin_lock(&step_lock); + list_del(&hook->node); + raw_spin_unlock(&step_lock); +} + +/* + * Call registered single step handers + * There is no Syndrome info to check for determining the handler. + * So we call all the registered handlers, until the right handler is + * found which returns zero. + */ +static int call_step_hook(struct pt_regs *regs, + unsigned int esr, unsigned long addr) +{ + struct step_hook *hook; + int (*fn)(struct pt_regs *regs, + unsigned int esr, unsigned long addr) = NULL; + + raw_spin_lock(&step_lock); + list_for_each_entry(hook, &step_hook, node) { + fn = hook->fn; + raw_spin_unlock(&step_lock); + + if (!fn(regs, esr, addr)) + return 0; + + raw_spin_lock(&step_lock); + } + raw_spin_unlock(&step_lock); + + return 1; +} + static int single_step_handler(unsigned long addr, unsigned int esr, struct pt_regs *regs) { @@ -215,8 +261,11 @@ static int single_step_handler(unsigned long addr, unsigned int esr, */ user_rewind_single_step(current); } else { - /* TODO: route to KGDB */ - pr_warning("Unexpected kernel single-step exception at EL1\n"); + /* Call single step handlers for kgdb/kprobes */ + if (call_step_hook(regs, esr, addr) == 0) + return 0; + + pr_warn("unexpected single step exception at %lx!\n", addr); /* * Re-enable stepping since we know that we will be * returning to regs. @@ -227,11 +276,51 @@ static int single_step_handler(unsigned long addr, unsigned int esr, return 0; } + +static LIST_HEAD(break_hook); +static DEFINE_RAW_SPINLOCK(break_lock); + +void register_break_hook(struct break_hook *hook) +{ + raw_spin_lock(&break_lock); + list_add(&hook->node, &break_hook); + raw_spin_unlock(&break_lock); +} + +void unregister_break_hook(struct break_hook *hook) +{ + raw_spin_lock(&break_lock); + list_del(&hook->node); + raw_spin_unlock(&break_lock); +} + +static int call_break_hook(struct pt_regs *regs, + unsigned int esr, unsigned long addr) +{ + struct break_hook *hook; + int (*fn)(struct pt_regs *regs, + unsigned int esr, unsigned long addr) = NULL; + + raw_spin_lock(&break_lock); + list_for_each_entry(hook, &break_hook, node) + if ((esr & hook->esr_mask) == hook->esr_val) + fn = hook->fn; + raw_spin_unlock(&break_lock); + + return fn ? fn(regs, esr, addr) : 1; +} + static int brk_handler(unsigned long addr, unsigned int esr, struct pt_regs *regs) { siginfo_t info; + /* Call single step handlers for kgdb/kprobes */ + if (call_break_hook(regs, esr, addr) == 0) + return 0; + + pr_warn("unexpected brk exception at %lx, esr=0x%x\n", addr, esr); + if (!user_mode(regs)) return -EFAULT; @@ -291,7 +380,7 @@ static int __init debug_traps_init(void) hook_debug_fault_code(DBG_ESR_EVT_HWSS, single_step_handler, SIGTRAP, TRAP_HWBKPT, "single-step handler"); hook_debug_fault_code(DBG_ESR_EVT_BRK, brk_handler, SIGTRAP, - TRAP_BRKPT, "ptrace BRK handler"); + TRAP_BRKPT, "AArch64 BRK handler"); return 0; } arch_initcall(debug_traps_init); diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 3881fd1..9589242 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -288,8 +288,12 @@ el1_dbg: /* * Debug exception handling */ + cmp x24, #ESR_EL1_EC_BRK64 // if BRK64 + cinc x24, x24, eq // set bit '0' tbz x24, #0, el1_inv // EL1 only - mrs x0, far_el1 + mrs x25, far_el1 // Watchpoint location + cmp x24, #ESR_EL1_EC_WATCHPT_EL1 + csel x0, x25, x22, eq // addr: x25->far_el1, x22->elr_el1 mov x2, sp // struct pt_regs bl do_debug_exception -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-09-30 9:44 [PATCH v2 0/3] AArch64: KGDB support vijay.kilari at gmail.com 2013-09-30 9:44 ` [PATCH v2 1/3] AArch64: Add single-step and breakpoint handler hooks vijay.kilari at gmail.com @ 2013-09-30 9:44 ` vijay.kilari at gmail.com 2013-09-30 16:36 ` Will Deacon 2013-09-30 9:44 ` [PATCH v2 3/3] AArch64: KGDB: Add step debugging support vijay.kilari at gmail.com 2 siblings, 1 reply; 11+ messages in thread From: vijay.kilari at gmail.com @ 2013-09-30 9:44 UTC (permalink / raw) To: linux-arm-kernel From: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> Add KGDB debug support for kernel debugging. With this patch, basic KGDB debugging is possible.GDB register layout is updated and GDB tool can establish connection with target and can set/clear breakpoints. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> --- arch/arm64/include/asm/debug-monitors.h | 10 ++ arch/arm64/include/asm/kgdb.h | 81 +++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/kgdb.c | 298 +++++++++++++++++++++++++++++++ 4 files changed, 390 insertions(+) diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index 19e429e..ed376ce 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -28,6 +28,16 @@ #define DBG_ESR_EVT_HWWP 0x2 #define DBG_ESR_EVT_BRK 0x6 +/* + * Break point instruction encoding + */ +#define BREAK_INSTR_SIZE 4 +#define KGDB_BREAKINST_ESR_VAL 0xf2000000 +#define KGDB_COMPILED_BREAK_ESR_VAL 0xf2000001 +#define KGDB_ARM64_COMPILE_BRK_IMM 1 +#define CACHE_FLUSH_IS_SAFE 1 + + enum debug_el { DBG_ACTIVE_EL0 = 0, DBG_ACTIVE_EL1, diff --git a/arch/arm64/include/asm/kgdb.h b/arch/arm64/include/asm/kgdb.h new file mode 100644 index 0000000..15b36fd --- /dev/null +++ b/arch/arm64/include/asm/kgdb.h @@ -0,0 +1,81 @@ +/* + * AArch64 KGDB support + * + * Based on arch/arm/include/kgdb.h + * + * Copyright (C) 2013 Cavium Inc. + * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ARM_KGDB_H__ +#define __ARM_KGDB_H__ + +#include <linux/ptrace.h> +#include <asm/debug-monitors.h> + +#ifndef __ASSEMBLY__ + +static inline void arch_kgdb_breakpoint(void) +{ + asm ("brk %0" :: "I" (KGDB_ARM64_COMPILE_BRK_IMM)); +} + +extern void kgdb_handle_bus_error(void); +extern int kgdb_fault_expected; + +#endif /* !__ASSEMBLY__ */ + +/* + * gdb is expecting the following registers layout. + * + * General purpose regs: + * r0-r30: 64 bit + * sp,pc : 64 bit + * pstate : 32 bit + * Total: 34 + * FPU regs: + * f0-f31: 128 bit + * Total: 32 + * Extra regs + * fpsr & fpcr: 32 bit + * Total: 2 + * + */ + +#define _GP_REGS 34 +#define _FP_REGS 32 +#define _EXTRA_REGS 2 +#define DBG_MAX_REG_NUM (_GP_REGS + _FP_REGS + _EXTRA_REGS) + +/* + * Size of I/O buffer for gdb packet. + * considering to hold all register contents, size is set to 1024 + */ + +#define BUFMAX 1024 + +/* + * Number of bytes required for gdb_regs buffer. + * _GP_REGS: 8 bytes, _FP_REGS: 16 bytes and _EXTRA_REGS: 4 bytes each + * pstate reg is only 4 bytes. subtract 4 from size contributed + * by _GP_REGS. + * GDB fails to connect for size beyond this with error + * "'g' packet reply is too long" + */ + +#define NUMREGBYTES (((_GP_REGS * 8) - 4) + (_FP_REGS * 16) + \ + (_EXTRA_REGS * 4)) + +#endif /* __ASM_KGDB_H__ */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 7b4b564..69613bb 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -18,6 +18,7 @@ arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o smp_psci.o arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +arm64-obj-$(CONFIG_KGDB) += kgdb.o obj-y += $(arm64-obj-y) vdso/ obj-m += $(arm64-obj-m) diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c new file mode 100644 index 0000000..c99e04d --- /dev/null +++ b/arch/arm64/kernel/kgdb.c @@ -0,0 +1,298 @@ +/* + * AArch64 KGDB support + * + * Based on arch/arm/kernel/kgdb.c + * + * Copyright (C) 2013 Cavium Inc. + * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/irq.h> +#include <linux/kdebug.h> +#include <linux/kgdb.h> +#include <asm/traps.h> + +struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = +{ + { "x0", 8, offsetof(struct pt_regs, regs[0])}, + { "x1", 8, offsetof(struct pt_regs, regs[1])}, + { "x2", 8, offsetof(struct pt_regs, regs[2])}, + { "x3", 8, offsetof(struct pt_regs, regs[3])}, + { "x4", 8, offsetof(struct pt_regs, regs[4])}, + { "x5", 8, offsetof(struct pt_regs, regs[5])}, + { "x6", 8, offsetof(struct pt_regs, regs[6])}, + { "x7", 8, offsetof(struct pt_regs, regs[7])}, + { "x8", 8, offsetof(struct pt_regs, regs[8])}, + { "x9", 8, offsetof(struct pt_regs, regs[9])}, + { "x10", 8, offsetof(struct pt_regs, regs[10])}, + { "x11", 8, offsetof(struct pt_regs, regs[11])}, + { "x12", 8, offsetof(struct pt_regs, regs[12])}, + { "x13", 8, offsetof(struct pt_regs, regs[13])}, + { "x14", 8, offsetof(struct pt_regs, regs[14])}, + { "x15", 8, offsetof(struct pt_regs, regs[15])}, + { "x16", 8, offsetof(struct pt_regs, regs[16])}, + { "x17", 8, offsetof(struct pt_regs, regs[17])}, + { "x18", 8, offsetof(struct pt_regs, regs[18])}, + { "x19", 8, offsetof(struct pt_regs, regs[19])}, + { "x20", 8, offsetof(struct pt_regs, regs[20])}, + { "x21", 8, offsetof(struct pt_regs, regs[21])}, + { "x22", 8, offsetof(struct pt_regs, regs[22])}, + { "x23", 8, offsetof(struct pt_regs, regs[23])}, + { "x24", 8, offsetof(struct pt_regs, regs[24])}, + { "x25", 8, offsetof(struct pt_regs, regs[25])}, + { "x26", 8, offsetof(struct pt_regs, regs[26])}, + { "x27", 8, offsetof(struct pt_regs, regs[27])}, + { "x28", 8, offsetof(struct pt_regs, regs[28])}, + { "x29", 8, offsetof(struct pt_regs, regs[29])}, + { "x30", 8, offsetof(struct pt_regs, regs[30])}, + { "sp", 8, offsetof(struct pt_regs, sp)}, + { "pc", 8, offsetof(struct pt_regs, pc)}, + { "pstate", 4, offsetof(struct pt_regs, pstate)}, + { "v0", 16, -1 }, + { "v1", 16, -1 }, + { "v2", 16, -1 }, + { "v3", 16, -1 }, + { "v4", 16, -1 }, + { "v5", 16, -1 }, + { "v6", 16, -1 }, + { "v7", 16, -1 }, + { "v8", 16, -1 }, + { "v9", 16, -1 }, + { "v10", 16, -1 }, + { "v11", 16, -1 }, + { "v12", 16, -1 }, + { "v13", 16, -1 }, + { "v14", 16, -1 }, + { "v15", 16, -1 }, + { "v16", 16, -1 }, + { "v17", 16, -1 }, + { "v18", 16, -1 }, + { "v19", 16, -1 }, + { "v20", 16, -1 }, + { "v21", 16, -1 }, + { "v22", 16, -1 }, + { "v23", 16, -1 }, + { "v24", 16, -1 }, + { "v25", 16, -1 }, + { "v26", 16, -1 }, + { "v27", 16, -1 }, + { "v28", 16, -1 }, + { "v29", 16, -1 }, + { "v30", 16, -1 }, + { "v31", 16, -1 }, + { "fpsr", 4, -1 }, + { "fpcr", 4, -1 }, +}; + +char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) +{ + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return NULL; + + if (dbg_reg_def[regno].offset != -1) + memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, + dbg_reg_def[regno].size); + else + memset(mem, 0, dbg_reg_def[regno].size); + return dbg_reg_def[regno].name; +} + +int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) +{ + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return -EINVAL; + + if (dbg_reg_def[regno].offset != -1) + memcpy((void *)regs + dbg_reg_def[regno].offset, mem, + dbg_reg_def[regno].size); + return 0; +} + +void +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) +{ + struct pt_regs *thread_regs; + int regno; + int i; + + /* Just making sure... */ + if (task == NULL) + return; + + /* Initialize to zero */ + for (regno = 0; regno < DBG_MAX_REG_NUM; regno++) + gdb_regs[regno] = 0; + + thread_regs = task_pt_regs(task); + + for(i = 0; i < 31; i++) + gdb_regs[i] = thread_regs->regs[i]; + + gdb_regs[31] = thread_regs->sp; + gdb_regs[32] = thread_regs->pc; + gdb_regs[33] = thread_regs->pstate; +} + +void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc) +{ + regs->pc = pc; +} + +static int compiled_break; + +int kgdb_arch_handle_exception(int exception_vector, int signo, + int err_code, char *remcom_in_buffer, + char *remcom_out_buffer, + struct pt_regs *linux_regs) +{ + unsigned long addr; + char *ptr; + int err; + + switch (remcom_in_buffer[0]) { + case 'D': + case 'k': + case 'c': + /* + * Packet D (Detach), k (kill) & c (Continue) requires + * to continue executing. Set pc to required address. + * Try to read optional parameter, pc unchanged if no parm. + * If this was a compiled breakpoint, we need to move + * to the next instruction or we will just breakpoint + * over and over again. + */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &addr)) + kgdb_arch_set_pc(linux_regs, addr); + else if (compiled_break == 1) + kgdb_arch_set_pc(linux_regs, linux_regs->pc + 4); + + compiled_break = 0; + + err = 0; + break; + default: + err = -1; + } + return err; +} + +static int +kgdb_brk_fn(struct pt_regs *regs, unsigned int esr, unsigned long addr) +{ + kgdb_handle_exception(1, SIGTRAP, 0, regs); + return 0; +} + +static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr, + unsigned long addr) +{ + compiled_break = 1; + kgdb_handle_exception(1, SIGTRAP, 0, regs); + + return 0; +} + +static struct break_hook kgdb_brkpt_hook = { + .esr_mask = 0xffffffff, + .esr_val = KGDB_BREAKINST_ESR_VAL, + .fn = kgdb_brk_fn +}; + +static struct break_hook kgdb_compiled_brkpt_hook = { + .esr_mask = 0xffffffff, + .esr_val = KGDB_COMPILED_BREAK_ESR_VAL, + .fn = kgdb_compiled_brk_fn +}; + +static void kgdb_call_nmi_hook(void *ignored) +{ + kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); +} + +void kgdb_roundup_cpus(unsigned long flags) +{ + local_irq_enable(); + smp_call_function(kgdb_call_nmi_hook, NULL, 0); + local_irq_disable(); +} + +static int __kgdb_notify(struct die_args *args, unsigned long cmd) +{ + struct pt_regs *regs = args->regs; + + if (kgdb_handle_exception(1, args->signr, cmd, regs)) + return NOTIFY_DONE; + return NOTIFY_STOP; +} + +static int +kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + ret = __kgdb_notify(ptr, cmd); + local_irq_restore(flags); + + return ret; +} + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_notify, + .priority = -INT_MAX, +}; + + +/* + * kgdb_arch_init - Perform any architecture specific initalization. + * + * This function will handle the initalization of any architecture + * specific callbacks. + */ +int kgdb_arch_init(void) +{ + int ret = register_die_notifier(&kgdb_notifier); + + if (ret != 0) + return ret; + + register_break_hook(&kgdb_brkpt_hook); + register_break_hook(&kgdb_compiled_brkpt_hook); + + return 0; +} + +/* + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_break_hook(&kgdb_brkpt_hook); + unregister_break_hook(&kgdb_compiled_brkpt_hook); + unregister_die_notifier(&kgdb_notifier); +} + +/* + * ARM instructions are always in LE. + * Break instruction is encoded in LE format + */ +struct kgdb_arch arch_kgdb_ops = { + .gdb_bpt_instr = {0x00, 0x00, 0x20, 0xd4} +}; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-09-30 9:44 ` [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support vijay.kilari at gmail.com @ 2013-09-30 16:36 ` Will Deacon 2013-10-01 10:53 ` Vijay Kilari 0 siblings, 1 reply; 11+ messages in thread From: Will Deacon @ 2013-09-30 16:36 UTC (permalink / raw) To: linux-arm-kernel On Mon, Sep 30, 2013 at 10:44:10AM +0100, vijay.kilari at gmail.com wrote: > From: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> > > Add KGDB debug support for kernel debugging. > With this patch, basic KGDB debugging is possible.GDB register > layout is updated and GDB tool can establish connection with > target and can set/clear breakpoints. > > Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> > --- > arch/arm64/include/asm/debug-monitors.h | 10 ++ > arch/arm64/include/asm/kgdb.h | 81 +++++++++ > arch/arm64/kernel/Makefile | 1 + > arch/arm64/kernel/kgdb.c | 298 +++++++++++++++++++++++++++++++ > 4 files changed, 390 insertions(+) > > diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h > index 19e429e..ed376ce 100644 > --- a/arch/arm64/include/asm/debug-monitors.h > +++ b/arch/arm64/include/asm/debug-monitors.h > @@ -28,6 +28,16 @@ > #define DBG_ESR_EVT_HWWP 0x2 > #define DBG_ESR_EVT_BRK 0x6 > > +/* > + * Break point instruction encoding > + */ > +#define BREAK_INSTR_SIZE 4 > +#define KGDB_BREAKINST_ESR_VAL 0xf2000000 > +#define KGDB_COMPILED_BREAK_ESR_VAL 0xf2000001 > +#define KGDB_ARM64_COMPILE_BRK_IMM 1 > +#define CACHE_FLUSH_IS_SAFE 1 #define DBG_BRK_KGDB_DYN 0 #define DBG_BRK_KGDB_COMPILED 1 #define DBG_ESR_VAL_BRK(x) (0xf2000000 | ((x) & 0xffff)) Then you can use the latter to construct your ESR values dynamically and adding a new brk handler is straightforward. > diff --git a/arch/arm64/include/asm/kgdb.h b/arch/arm64/include/asm/kgdb.h > new file mode 100644 > index 0000000..15b36fd > --- /dev/null > +++ b/arch/arm64/include/asm/kgdb.h > @@ -0,0 +1,81 @@ > +/* > + * AArch64 KGDB support > + * > + * Based on arch/arm/include/kgdb.h > + * > + * Copyright (C) 2013 Cavium Inc. > + * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#ifndef __ARM_KGDB_H__ > +#define __ARM_KGDB_H__ > + > +#include <linux/ptrace.h> > +#include <asm/debug-monitors.h> > + > +#ifndef __ASSEMBLY__ > + > +static inline void arch_kgdb_breakpoint(void) > +{ > + asm ("brk %0" :: "I" (KGDB_ARM64_COMPILE_BRK_IMM)); > +} Hmm, I need to find me a compiler guy, but I don't have much faith in this function in the face of inlining. Sure a breakpoint needs to happen at a specific point in the program? If so, why can't GCC re-order this asm block as it likes? Or is there a restricted use-case for compiled breakpoints in kgdb? > +void > +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) > +{ > + struct pt_regs *thread_regs; > + int regno; > + int i; > + > + /* Just making sure... */ > + if (task == NULL) > + return; Erm... that comment just raises more questions. I appreciate ARM has the same check, but why doesn't x86? Can task *actually* be NULL? > + > + /* Initialize to zero */ > + for (regno = 0; regno < DBG_MAX_REG_NUM; regno++) > + gdb_regs[regno] = 0; memset? > + > + thread_regs = task_pt_regs(task); > + > + for(i = 0; i < 31; i++) > + gdb_regs[i] = thread_regs->regs[i]; memcpy? > +int kgdb_arch_handle_exception(int exception_vector, int signo, > + int err_code, char *remcom_in_buffer, > + char *remcom_out_buffer, > + struct pt_regs *linux_regs) > +{ > + unsigned long addr; > + char *ptr; > + int err; > + > + switch (remcom_in_buffer[0]) { > + case 'D': > + case 'k': > + case 'c': > + /* > + * Packet D (Detach), k (kill) & c (Continue) requires > + * to continue executing. Set pc to required address. > + * Try to read optional parameter, pc unchanged if no parm. > + * If this was a compiled breakpoint, we need to move > + * to the next instruction or we will just breakpoint > + * over and over again. > + */ > + ptr = &remcom_in_buffer[1]; > + if (kgdb_hex2long(&ptr, &addr)) > + kgdb_arch_set_pc(linux_regs, addr); > + else if (compiled_break == 1) > + kgdb_arch_set_pc(linux_regs, linux_regs->pc + 4); > + > + compiled_break = 0; > + > + err = 0; > + break; > + default: > + err = -1; > + } > + return err; > +} > + > +static int > +kgdb_brk_fn(struct pt_regs *regs, unsigned int esr, unsigned long addr) > +{ > + kgdb_handle_exception(1, SIGTRAP, 0, regs); > + return 0; > +} > + > +static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr, > + unsigned long addr) > +{ > + compiled_break = 1; > + kgdb_handle_exception(1, SIGTRAP, 0, regs); > + > + return 0; > +} > + > +static struct break_hook kgdb_brkpt_hook = { > + .esr_mask = 0xffffffff, > + .esr_val = KGDB_BREAKINST_ESR_VAL, > + .fn = kgdb_brk_fn > +}; > + > +static struct break_hook kgdb_compiled_brkpt_hook = { > + .esr_mask = 0xffffffff, > + .esr_val = KGDB_COMPILED_BREAK_ESR_VAL, > + .fn = kgdb_compiled_brk_fn > +}; > + > +static void kgdb_call_nmi_hook(void *ignored) > +{ > + kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); > +} > + > +void kgdb_roundup_cpus(unsigned long flags) > +{ > + local_irq_enable(); > + smp_call_function(kgdb_call_nmi_hook, NULL, 0); > + local_irq_disable(); > +} > + > +static int __kgdb_notify(struct die_args *args, unsigned long cmd) > +{ > + struct pt_regs *regs = args->regs; > + > + if (kgdb_handle_exception(1, args->signr, cmd, regs)) > + return NOTIFY_DONE; > + return NOTIFY_STOP; > +} > + > +static int > +kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) > +{ > + unsigned long flags; > + int ret; > + > + local_irq_save(flags); > + ret = __kgdb_notify(ptr, cmd); > + local_irq_restore(flags); > + > + return ret; > +} > + > +static struct notifier_block kgdb_notifier = { > + .notifier_call = kgdb_notify, > + .priority = -INT_MAX, > +}; > + > + > +/* > + * kgdb_arch_init - Perform any architecture specific initalization. > + * > + * This function will handle the initalization of any architecture > + * specific callbacks. > + */ > +int kgdb_arch_init(void) > +{ > + int ret = register_die_notifier(&kgdb_notifier); > + > + if (ret != 0) > + return ret; > + > + register_break_hook(&kgdb_brkpt_hook); > + register_break_hook(&kgdb_compiled_brkpt_hook); > + > + return 0; > +} > + > +/* > + * kgdb_arch_exit - Perform any architecture specific uninitalization. > + * > + * This function will handle the uninitalization of any architecture > + * specific callbacks, for dynamic registration and unregistration. > + */ > +void kgdb_arch_exit(void) > +{ > + unregister_break_hook(&kgdb_brkpt_hook); > + unregister_break_hook(&kgdb_compiled_brkpt_hook); > + unregister_die_notifier(&kgdb_notifier); > +} > + > +/* > + * ARM instructions are always in LE. > + * Break instruction is encoded in LE format > + */ > +struct kgdb_arch arch_kgdb_ops = { > + .gdb_bpt_instr = {0x00, 0x00, 0x20, 0xd4} Again, you should probably try and encode the dynamic breakpoint immediate in here (which is sadly offset by 5 bits in the instruction encoding). Will ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-09-30 16:36 ` Will Deacon @ 2013-10-01 10:53 ` Vijay Kilari 2013-10-02 10:18 ` Will Deacon 0 siblings, 1 reply; 11+ messages in thread From: Vijay Kilari @ 2013-10-01 10:53 UTC (permalink / raw) To: linux-arm-kernel On Mon, Sep 30, 2013 at 10:06 PM, Will Deacon <will.deacon@arm.com> wrote: > On Mon, Sep 30, 2013 at 10:44:10AM +0100, vijay.kilari at gmail.com wrote: >> From: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> >> >> Add KGDB debug support for kernel debugging. >> With this patch, basic KGDB debugging is possible.GDB register >> layout is updated and GDB tool can establish connection with >> target and can set/clear breakpoints. >> >> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> >> --- >> arch/arm64/include/asm/debug-monitors.h | 10 ++ >> arch/arm64/include/asm/kgdb.h | 81 +++++++++ >> arch/arm64/kernel/Makefile | 1 + >> arch/arm64/kernel/kgdb.c | 298 +++++++++++++++++++++++++++++++ >> 4 files changed, 390 insertions(+) >> >> diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h >> index 19e429e..ed376ce 100644 >> --- a/arch/arm64/include/asm/debug-monitors.h >> +++ b/arch/arm64/include/asm/debug-monitors.h >> @@ -28,6 +28,16 @@ >> #define DBG_ESR_EVT_HWWP 0x2 >> #define DBG_ESR_EVT_BRK 0x6 >> >> +/* >> + * Break point instruction encoding >> + */ >> +#define BREAK_INSTR_SIZE 4 >> +#define KGDB_BREAKINST_ESR_VAL 0xf2000000 >> +#define KGDB_COMPILED_BREAK_ESR_VAL 0xf2000001 >> +#define KGDB_ARM64_COMPILE_BRK_IMM 1 >> +#define CACHE_FLUSH_IS_SAFE 1 > > #define DBG_BRK_KGDB_DYN 0 > #define DBG_BRK_KGDB_COMPILED 1 > > #define DBG_ESR_VAL_BRK(x) (0xf2000000 | ((x) & 0xffff)) > > Then you can use the latter to construct your ESR values dynamically and > adding a new brk handler is straightforward. > OK, agreed >> diff --git a/arch/arm64/include/asm/kgdb.h b/arch/arm64/include/asm/kgdb.h >> new file mode 100644 >> index 0000000..15b36fd >> --- /dev/null >> +++ b/arch/arm64/include/asm/kgdb.h >> @@ -0,0 +1,81 @@ >> +/* >> + * AArch64 KGDB support >> + * >> + * Based on arch/arm/include/kgdb.h >> + * >> + * Copyright (C) 2013 Cavium Inc. >> + * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#ifndef __ARM_KGDB_H__ >> +#define __ARM_KGDB_H__ >> + >> +#include <linux/ptrace.h> >> +#include <asm/debug-monitors.h> >> + >> +#ifndef __ASSEMBLY__ >> + >> +static inline void arch_kgdb_breakpoint(void) >> +{ >> + asm ("brk %0" :: "I" (KGDB_ARM64_COMPILE_BRK_IMM)); >> +} > > Hmm, I need to find me a compiler guy, but I don't have much faith in this > function in the face of inlining. Sure a breakpoint needs to happen at a > specific point in the program? If so, why can't GCC re-order this asm block > as it likes? > > Or is there a restricted use-case for compiled breakpoints in kgdb? > As per Andrew, arch_kgdb_breakpoint is declared as static inline for the x86, arm, tile and powerpc. Since the inline-asm does not have any output constraints it is considered volatile just like if you declare the inline-asm as volatile. The compiler might reorder some stuff around it due to all uses being explicit just like any other volatile inline-asm. In fact, the arch_kgdb_breakpoint is called from only one place from kernel/debug/debug_core.c and there is no way for the compiler to reorder the block as it has two write barriers around it: wmb(); /* Sync point before breakpoint */ arch_kgdb_breakpoint(); wmb(); /* Sync point after breakpoint */ >> +void >> +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) >> +{ >> + struct pt_regs *thread_regs; >> + int regno; >> + int i; >> + >> + /* Just making sure... */ >> + if (task == NULL) >> + return; > > Erm... that comment just raises more questions. I appreciate ARM has the > same check, but why doesn't x86? Can task *actually* be NULL? > generally, the task will not be NULL. The check made because the caller (gdbstub.c) fetches task information from gdb global structure and calls this function. This helps in case the caller fails to pass task info. I think should not be problem with this check. In fact this is legacy code >> + >> + /* Initialize to zero */ >> + for (regno = 0; regno < DBG_MAX_REG_NUM; regno++) >> + gdb_regs[regno] = 0; > > memset? OK. agreed > >> + >> + thread_regs = task_pt_regs(task); >> + >> + for(i = 0; i < 31; i++) >> + gdb_regs[i] = thread_regs->regs[i]; > > memcpy? > OK. agreed >> +int kgdb_arch_handle_exception(int exception_vector, int signo, >> + int err_code, char *remcom_in_buffer, >> + char *remcom_out_buffer, >> + struct pt_regs *linux_regs) >> +{ >> + unsigned long addr; >> + char *ptr; >> + int err; >> + >> + switch (remcom_in_buffer[0]) { >> + case 'D': >> + case 'k': >> + case 'c': >> + /* >> + * Packet D (Detach), k (kill) & c (Continue) requires >> + * to continue executing. Set pc to required address. >> + * Try to read optional parameter, pc unchanged if no parm. >> + * If this was a compiled breakpoint, we need to move >> + * to the next instruction or we will just breakpoint >> + * over and over again. >> + */ >> + ptr = &remcom_in_buffer[1]; >> + if (kgdb_hex2long(&ptr, &addr)) >> + kgdb_arch_set_pc(linux_regs, addr); >> + else if (compiled_break == 1) >> + kgdb_arch_set_pc(linux_regs, linux_regs->pc + 4); >> + >> + compiled_break = 0; >> + >> + err = 0; >> + break; >> + default: >> + err = -1; >> + } >> + return err; >> +} >> + >> +static int >> +kgdb_brk_fn(struct pt_regs *regs, unsigned int esr, unsigned long addr) >> +{ >> + kgdb_handle_exception(1, SIGTRAP, 0, regs); >> + return 0; >> +} >> + >> +static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr, >> + unsigned long addr) >> +{ >> + compiled_break = 1; >> + kgdb_handle_exception(1, SIGTRAP, 0, regs); >> + >> + return 0; >> +} >> + >> +static struct break_hook kgdb_brkpt_hook = { >> + .esr_mask = 0xffffffff, >> + .esr_val = KGDB_BREAKINST_ESR_VAL, >> + .fn = kgdb_brk_fn >> +}; >> + >> +static struct break_hook kgdb_compiled_brkpt_hook = { >> + .esr_mask = 0xffffffff, >> + .esr_val = KGDB_COMPILED_BREAK_ESR_VAL, >> + .fn = kgdb_compiled_brk_fn >> +}; >> + >> +static void kgdb_call_nmi_hook(void *ignored) >> +{ >> + kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); >> +} >> + >> +void kgdb_roundup_cpus(unsigned long flags) >> +{ >> + local_irq_enable(); >> + smp_call_function(kgdb_call_nmi_hook, NULL, 0); >> + local_irq_disable(); >> +} >> + >> +static int __kgdb_notify(struct die_args *args, unsigned long cmd) >> +{ >> + struct pt_regs *regs = args->regs; >> + >> + if (kgdb_handle_exception(1, args->signr, cmd, regs)) >> + return NOTIFY_DONE; >> + return NOTIFY_STOP; >> +} >> + >> +static int >> +kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) >> +{ >> + unsigned long flags; >> + int ret; >> + >> + local_irq_save(flags); >> + ret = __kgdb_notify(ptr, cmd); >> + local_irq_restore(flags); >> + >> + return ret; >> +} >> + >> +static struct notifier_block kgdb_notifier = { >> + .notifier_call = kgdb_notify, >> + .priority = -INT_MAX, >> +}; >> + >> + >> +/* >> + * kgdb_arch_init - Perform any architecture specific initalization. >> + * >> + * This function will handle the initalization of any architecture >> + * specific callbacks. >> + */ >> +int kgdb_arch_init(void) >> +{ >> + int ret = register_die_notifier(&kgdb_notifier); >> + >> + if (ret != 0) >> + return ret; >> + >> + register_break_hook(&kgdb_brkpt_hook); >> + register_break_hook(&kgdb_compiled_brkpt_hook); >> + >> + return 0; >> +} >> + >> +/* >> + * kgdb_arch_exit - Perform any architecture specific uninitalization. >> + * >> + * This function will handle the uninitalization of any architecture >> + * specific callbacks, for dynamic registration and unregistration. >> + */ >> +void kgdb_arch_exit(void) >> +{ >> + unregister_break_hook(&kgdb_brkpt_hook); >> + unregister_break_hook(&kgdb_compiled_brkpt_hook); >> + unregister_die_notifier(&kgdb_notifier); >> +} >> + >> +/* >> + * ARM instructions are always in LE. >> + * Break instruction is encoded in LE format >> + */ >> +struct kgdb_arch arch_kgdb_ops = { >> + .gdb_bpt_instr = {0x00, 0x00, 0x20, 0xd4} > > Again, you should probably try and encode the dynamic breakpoint immediate > in here (which is sadly offset by 5 bits in the instruction encoding). > Yes, I propose to change like this #define KGDB_DYN_BRK_INS_BYTE0 ((KGDB_DYN_DGB_BRK_IMM & 0x7) << 5) #define KGDB_DYN_BRK_INS_BYTE1 ((KGDB_DYN_DGB_BRK_IMM & 0x7f8) >> 3) #define KGDB_DYN_BRK_INS_BYTE2 (0x20 | \ ((KGDB_DYN_DGB_BRK_IMM & 0xf800) >> 11)) #define KGDB_DYN_BRK_INS_BYTE3 0xd4 struct kgdb_arch arch_kgdb_ops = { .gdb_bpt_instr = { KGDB_DYN_BRK_INS_BYTE0, KGDB_DYN_BRK_INS_BYTE1, KGDB_DYN_BRK_INS_BYTE2, KGDB_DYN_BRK_INS_BYTE3 } }; > Will ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-10-01 10:53 ` Vijay Kilari @ 2013-10-02 10:18 ` Will Deacon 2013-10-04 21:51 ` Andrew Pinski 0 siblings, 1 reply; 11+ messages in thread From: Will Deacon @ 2013-10-02 10:18 UTC (permalink / raw) To: linux-arm-kernel On Tue, Oct 01, 2013 at 11:53:01AM +0100, Vijay Kilari wrote: > On Mon, Sep 30, 2013 at 10:06 PM, Will Deacon <will.deacon@arm.com> wrote: > > On Mon, Sep 30, 2013 at 10:44:10AM +0100, vijay.kilari at gmail.com wrote: > >> +static inline void arch_kgdb_breakpoint(void) > >> +{ > >> + asm ("brk %0" :: "I" (KGDB_ARM64_COMPILE_BRK_IMM)); > >> +} > > > > Hmm, I need to find me a compiler guy, but I don't have much faith in this > > function in the face of inlining. Sure a breakpoint needs to happen at a > > specific point in the program? If so, why can't GCC re-order this asm block > > as it likes? > > > > Or is there a restricted use-case for compiled breakpoints in kgdb? > > > As per Andrew, > arch_kgdb_breakpoint is declared as static inline for the x86, arm, tile > and powerpc. Since the inline-asm does not have any output constraints > it is considered volatile just like if you declare the inline-asm as volatile. > The compiler might reorder some stuff around it due to all uses being explicit > just like any other volatile inline-asm. > > In fact, the arch_kgdb_breakpoint is called from only one place from > kernel/debug/debug_core.c and there is no way for the compiler to > reorder the block > as it has two write barriers around it: > wmb(); /* Sync point before breakpoint */ > arch_kgdb_breakpoint(); > wmb(); /* Sync point after breakpoint */ A write barrier just looks like a memory clobber to the compiler, which isn't enough to stop this being reordered wrt breakpoints. In fact, I don't think is actually solvable with GCC since there is no way to emit a full scheduling barrier using asm constraints (we'd need an intrinsic I think). You could try clobbering every register, but that's filthy, and will likely cause reload to generate some dreadful spills. > >> +void > >> +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) > >> +{ > >> + struct pt_regs *thread_regs; > >> + int regno; > >> + int i; > >> + > >> + /* Just making sure... */ > >> + if (task == NULL) > >> + return; > > > > Erm... that comment just raises more questions. I appreciate ARM has the > > same check, but why doesn't x86? Can task *actually* be NULL? > > > generally, the task will not be NULL. The check made because the > caller (gdbstub.c) > fetches task information from gdb global structure and calls this function. > This helps in case the caller fails to pass task info. I think should not be > problem with this check. In fact this is legacy code Generally or always? Afaict, either other architectures have a bug here or we have a redundant check. Regardless, it should be made consistent. > >> +/* > >> + * ARM instructions are always in LE. > >> + * Break instruction is encoded in LE format > >> + */ > >> +struct kgdb_arch arch_kgdb_ops = { > >> + .gdb_bpt_instr = {0x00, 0x00, 0x20, 0xd4} > > > > Again, you should probably try and encode the dynamic breakpoint immediate > > in here (which is sadly offset by 5 bits in the instruction encoding). > > > Yes, I propose to change like this > > #define KGDB_DYN_BRK_INS_BYTE0 ((KGDB_DYN_DGB_BRK_IMM & 0x7) << 5) > #define KGDB_DYN_BRK_INS_BYTE1 ((KGDB_DYN_DGB_BRK_IMM & 0x7f8) >> 3) > #define KGDB_DYN_BRK_INS_BYTE2 (0x20 | \ > ((KGDB_DYN_DGB_BRK_IMM & 0xf800) >> 11)) > #define KGDB_DYN_BRK_INS_BYTE3 0xd4 This would be cleaner if you #defined the complete instruction encoding: #define AARCH64_BREAK_MON 0xd4200000 #define KGDB_DYN_BRK_BYTE(x) \ (((AARCH64_BREAK_MON | KGDB_DYN_DGB_BRK_IMM) >> (x * 8)) & 0xff) Will ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-10-02 10:18 ` Will Deacon @ 2013-10-04 21:51 ` Andrew Pinski 2013-10-07 9:51 ` Will Deacon 0 siblings, 1 reply; 11+ messages in thread From: Andrew Pinski @ 2013-10-04 21:51 UTC (permalink / raw) To: linux-arm-kernel On Wed, Oct 2, 2013 at 3:18 AM, Will Deacon <will.deacon@arm.com> wrote: > On Tue, Oct 01, 2013 at 11:53:01AM +0100, Vijay Kilari wrote: >> On Mon, Sep 30, 2013 at 10:06 PM, Will Deacon <will.deacon@arm.com> wrote: >> > On Mon, Sep 30, 2013 at 10:44:10AM +0100, vijay.kilari at gmail.com wrote: >> >> +static inline void arch_kgdb_breakpoint(void) >> >> +{ >> >> + asm ("brk %0" :: "I" (KGDB_ARM64_COMPILE_BRK_IMM)); >> >> +} >> > >> > Hmm, I need to find me a compiler guy, but I don't have much faith in this >> > function in the face of inlining. Sure a breakpoint needs to happen at a >> > specific point in the program? If so, why can't GCC re-order this asm block >> > as it likes? >> > >> > Or is there a restricted use-case for compiled breakpoints in kgdb? >> > >> As per Andrew, >> arch_kgdb_breakpoint is declared as static inline for the x86, arm, tile >> and powerpc. Since the inline-asm does not have any output constraints >> it is considered volatile just like if you declare the inline-asm as volatile. >> The compiler might reorder some stuff around it due to all uses being explicit >> just like any other volatile inline-asm. >> >> In fact, the arch_kgdb_breakpoint is called from only one place from >> kernel/debug/debug_core.c and there is no way for the compiler to >> reorder the block >> as it has two write barriers around it: >> wmb(); /* Sync point before breakpoint */ >> arch_kgdb_breakpoint(); >> wmb(); /* Sync point after breakpoint */ > > A write barrier just looks like a memory clobber to the compiler, which > isn't enough to stop this being reordered wrt breakpoints. Yes this will be a full schedule barrier due to the inline-asm being a volatile inline-asm (implicitly because there are no outputs). What I meant about the compiler could move around code only happens when you don't there are other implicit non schedule barrier instructions, in this case wmb is an volatile inline-asm which is also a scheduler barrier. > In fact, I don't > think is actually solvable with GCC since there is no way to emit a full > scheduling barrier using asm constraints (we'd need an intrinsic I think). > > You could try clobbering every register, but that's filthy, and will likely > cause reload to generate some dreadful spills. Actually this is enough since both inline-asms (the one for wmb and arch_kgdb_breakpoint) are going to be treated as volatile by the compiler so it will not schedule those two inline-asm with respect of each other. Note all other targets (ARM, PPC, x86, tile, etc.) all use a static inline function which does exactly the same as what is being added here. x86 for an example: static inline void arch_kgdb_breakpoint(void) { asm(" int $3"); } arm: static inline void arch_kgdb_breakpoint(void) { asm(".word 0xe7ffdeff"); } PPC: static inline void arch_kgdb_breakpoint(void) { asm(".long 0x7d821008"); /* twge r2, r2 */ } Yes they have don't have either input or output constraints while this is adding one with an input constraint but that does not change the volatilism of the inline-asm; only the output constraint does. Thanks, Andrew Pinski > >> >> +void >> >> +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) >> >> +{ >> >> + struct pt_regs *thread_regs; >> >> + int regno; >> >> + int i; >> >> + >> >> + /* Just making sure... */ >> >> + if (task == NULL) >> >> + return; >> > >> > Erm... that comment just raises more questions. I appreciate ARM has the >> > same check, but why doesn't x86? Can task *actually* be NULL? >> > >> generally, the task will not be NULL. The check made because the >> caller (gdbstub.c) >> fetches task information from gdb global structure and calls this function. >> This helps in case the caller fails to pass task info. I think should not be >> problem with this check. In fact this is legacy code > > Generally or always? Afaict, either other architectures have a bug here or > we have a redundant check. Regardless, it should be made consistent. > >> >> +/* >> >> + * ARM instructions are always in LE. >> >> + * Break instruction is encoded in LE format >> >> + */ >> >> +struct kgdb_arch arch_kgdb_ops = { >> >> + .gdb_bpt_instr = {0x00, 0x00, 0x20, 0xd4} >> > >> > Again, you should probably try and encode the dynamic breakpoint immediate >> > in here (which is sadly offset by 5 bits in the instruction encoding). >> > >> Yes, I propose to change like this >> >> #define KGDB_DYN_BRK_INS_BYTE0 ((KGDB_DYN_DGB_BRK_IMM & 0x7) << 5) >> #define KGDB_DYN_BRK_INS_BYTE1 ((KGDB_DYN_DGB_BRK_IMM & 0x7f8) >> 3) >> #define KGDB_DYN_BRK_INS_BYTE2 (0x20 | \ >> ((KGDB_DYN_DGB_BRK_IMM & 0xf800) >> 11)) >> #define KGDB_DYN_BRK_INS_BYTE3 0xd4 > > This would be cleaner if you #defined the complete instruction encoding: > > #define AARCH64_BREAK_MON 0xd4200000 > > #define KGDB_DYN_BRK_BYTE(x) \ > (((AARCH64_BREAK_MON | KGDB_DYN_DGB_BRK_IMM) >> (x * 8)) & 0xff) > > Will ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-10-04 21:51 ` Andrew Pinski @ 2013-10-07 9:51 ` Will Deacon 2013-10-11 0:24 ` Andrew Pinski 0 siblings, 1 reply; 11+ messages in thread From: Will Deacon @ 2013-10-07 9:51 UTC (permalink / raw) To: linux-arm-kernel Hi Andrew, On Fri, Oct 04, 2013 at 10:51:02PM +0100, Andrew Pinski wrote: > On Wed, Oct 2, 2013 at 3:18 AM, Will Deacon <will.deacon@arm.com> wrote: > > On Tue, Oct 01, 2013 at 11:53:01AM +0100, Vijay Kilari wrote: > >> In fact, the arch_kgdb_breakpoint is called from only one place from > >> kernel/debug/debug_core.c and there is no way for the compiler to > >> reorder the block > >> as it has two write barriers around it: > >> wmb(); /* Sync point before breakpoint */ > >> arch_kgdb_breakpoint(); > >> wmb(); /* Sync point after breakpoint */ > > > > A write barrier just looks like a memory clobber to the compiler, which > > isn't enough to stop this being reordered wrt breakpoints. > > Yes this will be a full schedule barrier due to the inline-asm being a > volatile inline-asm (implicitly because there are no outputs). What I > meant about the compiler could move around code only happens when you > don't there are other implicit non schedule barrier instructions, in > this case wmb is an volatile inline-asm which is also a scheduler > barrier. volatile != scheduling barrier (example below). > > In fact, I don't > > think is actually solvable with GCC since there is no way to emit a full > > scheduling barrier using asm constraints (we'd need an intrinsic I think). > > > > You could try clobbering every register, but that's filthy, and will likely > > cause reload to generate some dreadful spills. > > Actually this is enough since both inline-asms (the one for wmb and > arch_kgdb_breakpoint) are going to be treated as volatile by the > compiler so it will not schedule those two inline-asm with respect of > each other. That's true: the asms will not be optimised away and/or moved across each other. However, other code *can* move across then, which strikes me as odd when we're dealing with breakpoints. E.g: 8<--- #define wmb() __asm__ __volatile__ ("dsb" ::: "memory") static inline void nop(void) { asm ("nop"); } int foo(int *bar) { int baz, i; baz = *bar; for (i = 0; i < 10; ++i) baz++; wmb(); nop(); wmb(); return baz; } --->8 Assembles to the following with GCC 4.9 for ARM: 00000000 <foo>: 0: e5900000 ldr r0, [r0] 4: f57ff04f dsb sy 8: e320f000 nop {0} c: f57ff04f dsb sy 10: e280000a add r0, r0, #10 14: e12fff1e bx lr So, whilst loading the parameter hazards against the memory clobber of the wmb()s, the loop (optimised to the single add) is now at the end of the function. If I wanted a breakpoint after that loop had finished, it's now no longer true. > Note all other targets (ARM, PPC, x86, tile, etc.) all use a static > inline function which does exactly the same as what is being added > here. Agreed, I didn't mean to imply this was an issue with this particular patch. I'm just curious as to why this has been deemed acceptable by other architectures, when it doesn't look especially useful to me. Will ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-10-07 9:51 ` Will Deacon @ 2013-10-11 0:24 ` Andrew Pinski 2013-10-11 10:43 ` Will Deacon 0 siblings, 1 reply; 11+ messages in thread From: Andrew Pinski @ 2013-10-11 0:24 UTC (permalink / raw) To: linux-arm-kernel On Mon, Oct 7, 2013 at 2:51 AM, Will Deacon <will.deacon@arm.com> wrote: > Hi Andrew, > > On Fri, Oct 04, 2013 at 10:51:02PM +0100, Andrew Pinski wrote: >> On Wed, Oct 2, 2013 at 3:18 AM, Will Deacon <will.deacon@arm.com> wrote: >> > On Tue, Oct 01, 2013 at 11:53:01AM +0100, Vijay Kilari wrote: >> >> In fact, the arch_kgdb_breakpoint is called from only one place from >> >> kernel/debug/debug_core.c and there is no way for the compiler to >> >> reorder the block >> >> as it has two write barriers around it: >> >> wmb(); /* Sync point before breakpoint */ >> >> arch_kgdb_breakpoint(); >> >> wmb(); /* Sync point after breakpoint */ >> > >> > A write barrier just looks like a memory clobber to the compiler, which >> > isn't enough to stop this being reordered wrt breakpoints. >> >> Yes this will be a full schedule barrier due to the inline-asm being a >> volatile inline-asm (implicitly because there are no outputs). What I >> meant about the compiler could move around code only happens when you >> don't there are other implicit non schedule barrier instructions, in >> this case wmb is an volatile inline-asm which is also a scheduler >> barrier. > > volatile != scheduling barrier (example below). Actually it does mean that but scheduling barrier != code motion barrier; at least in GCC. > >> > In fact, I don't >> > think is actually solvable with GCC since there is no way to emit a full >> > scheduling barrier using asm constraints (we'd need an intrinsic I think). >> > >> > You could try clobbering every register, but that's filthy, and will likely >> > cause reload to generate some dreadful spills. >> >> Actually this is enough since both inline-asms (the one for wmb and >> arch_kgdb_breakpoint) are going to be treated as volatile by the >> compiler so it will not schedule those two inline-asm with respect of >> each other. > > That's true: the asms will not be optimised away and/or moved across each > other. However, other code *can* move across then, which strikes me as odd > when we're dealing with breakpoints. > > E.g: > > 8<--- > > #define wmb() __asm__ __volatile__ ("dsb" ::: "memory") > > static inline void nop(void) > { > asm ("nop"); > } > > int foo(int *bar) > { > int baz, i; > > baz = *bar; > > for (i = 0; i < 10; ++i) > baz++; > > wmb(); > nop(); > wmb(); > > return baz; > } > > --->8 > > Assembles to the following with GCC 4.9 for ARM: > > 00000000 <foo>: > 0: e5900000 ldr r0, [r0] > 4: f57ff04f dsb sy > 8: e320f000 nop {0} > c: f57ff04f dsb sy > 10: e280000a add r0, r0, #10 > 14: e12fff1e bx lr Yes but this is not the scheduler doing the code motion (it is SCEV Constant prop followed by TER [temporary expression replacement] which is causing the code motion to happen). > > So, whilst loading the parameter hazards against the memory clobber of the > wmb()s, the loop (optimised to the single add) is now at the end of the > function. If I wanted a breakpoint after that loop had finished, it's now no > longer true. > >> Note all other targets (ARM, PPC, x86, tile, etc.) all use a static >> inline function which does exactly the same as what is being added >> here. > > Agreed, I didn't mean to imply this was an issue with this particular patch. > I'm just curious as to why this has been deemed acceptable by other > architectures, when it doesn't look especially useful to me. The main reason why it is acceptable by other architectures is due to the full definition of the function itself: void kgdb_breakpoint(void) { atomic_inc(&kgdb_setting_breakpoint); wmb(); /* Sync point before breakpoint */ arch_kgdb_breakpoint(); wmb(); /* Sync point after breakpoint */ atomic_dec(&kgdb_setting_breakpoint); } All of these function calls are all volatile inline-asm so there is not going to be any code motion happening. This is true in all architectures. So then you ask if kgdb_breakpoint can be inlined anywhere that we could get the breakpoint and not have the "correct" value, the answer is no and I audited each and every call to kgdb_breakpoint. If you want just add the attribute noinline to kgdb_breakpoint and the problem you mentioned about the code motion happening goes away. Thanks, Andrew Pinski ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support 2013-10-11 0:24 ` Andrew Pinski @ 2013-10-11 10:43 ` Will Deacon 0 siblings, 0 replies; 11+ messages in thread From: Will Deacon @ 2013-10-11 10:43 UTC (permalink / raw) To: linux-arm-kernel Hi Andrew, On Fri, Oct 11, 2013 at 01:24:29AM +0100, Andrew Pinski wrote: > On Mon, Oct 7, 2013 at 2:51 AM, Will Deacon <will.deacon@arm.com> wrote: > > On Fri, Oct 04, 2013 at 10:51:02PM +0100, Andrew Pinski wrote: > >> Yes this will be a full schedule barrier due to the inline-asm being a > >> volatile inline-asm (implicitly because there are no outputs). What I > >> meant about the compiler could move around code only happens when you > >> don't there are other implicit non schedule barrier instructions, in > >> this case wmb is an volatile inline-asm which is also a scheduler > >> barrier. > > > > volatile != scheduling barrier (example below). > > Actually it does mean that but scheduling barrier != code motion > barrier; at least in GCC. Bah, terminology. I can tell you're a compiler engineer ;) > > Assembles to the following with GCC 4.9 for ARM: > > > > 00000000 <foo>: > > 0: e5900000 ldr r0, [r0] > > 4: f57ff04f dsb sy > > 8: e320f000 nop {0} > > c: f57ff04f dsb sy > > 10: e280000a add r0, r0, #10 > > 14: e12fff1e bx lr > > > Yes but this is not the scheduler doing the code motion (it is SCEV > Constant prop followed by TER [temporary expression replacement] which > is causing the code motion to happen). Regardless, it's still not suitable for breakpoints in general. > >> Note all other targets (ARM, PPC, x86, tile, etc.) all use a static > >> inline function which does exactly the same as what is being added > >> here. > > > > Agreed, I didn't mean to imply this was an issue with this particular patch. > > I'm just curious as to why this has been deemed acceptable by other > > architectures, when it doesn't look especially useful to me. > > The main reason why it is acceptable by other architectures is due to > the full definition of the function itself: > void kgdb_breakpoint(void) > { > atomic_inc(&kgdb_setting_breakpoint); > wmb(); /* Sync point before breakpoint */ > arch_kgdb_breakpoint(); > wmb(); /* Sync point after breakpoint */ > atomic_dec(&kgdb_setting_breakpoint); > } > > All of these function calls are all volatile inline-asm so there is > not going to be any code motion happening. This is true in all > architectures. So then you ask if kgdb_breakpoint can be inlined > anywhere that we could get the breakpoint and not have the "correct" > value, the answer is no and I audited each and every call to > kgdb_breakpoint. If you want just add the attribute noinline to > kgdb_breakpoint and the problem you mentioned about the code motion > happening goes away. Thanks for taking a look at this. I think adding the noinline would be a good idea (as a seperate patch). Cheers, Will ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 3/3] AArch64: KGDB: Add step debugging support 2013-09-30 9:44 [PATCH v2 0/3] AArch64: KGDB support vijay.kilari at gmail.com 2013-09-30 9:44 ` [PATCH v2 1/3] AArch64: Add single-step and breakpoint handler hooks vijay.kilari at gmail.com 2013-09-30 9:44 ` [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support vijay.kilari at gmail.com @ 2013-09-30 9:44 ` vijay.kilari at gmail.com 2 siblings, 0 replies; 11+ messages in thread From: vijay.kilari at gmail.com @ 2013-09-30 9:44 UTC (permalink / raw) To: linux-arm-kernel From: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> Add KGDB software step debugging support for EL1 debug in AArch64 mode. KGDB registers step debug handler with debug monitor. On receiving 'step' command from GDB tool, target enables software step debugging and step address is updated. If no step address is received from GDB tool, target assumes next step address is current PC. Software Step debugging is disabled when 'continue' command is received Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> --- arch/arm64/kernel/kgdb.c | 59 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 51 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c index c99e04d..2d2485f 100644 --- a/arch/arm64/kernel/kgdb.c +++ b/arch/arm64/kernel/kgdb.c @@ -152,13 +152,26 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc) static int compiled_break; +static void kgdb_arch_update_addr(struct pt_regs *regs, + char *remcom_in_buffer) +{ + unsigned long addr; + char *ptr; + + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &addr)) + kgdb_arch_set_pc(regs, addr); + else if (compiled_break == 1) + kgdb_arch_set_pc(regs, regs->pc + 4); + + compiled_break = 0; +} + int kgdb_arch_handle_exception(int exception_vector, int signo, int err_code, char *remcom_in_buffer, char *remcom_out_buffer, struct pt_regs *linux_regs) { - unsigned long addr; - char *ptr; int err; switch (remcom_in_buffer[0]) { @@ -173,14 +186,31 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, * to the next instruction or we will just breakpoint * over and over again. */ - ptr = &remcom_in_buffer[1]; - if (kgdb_hex2long(&ptr, &addr)) - kgdb_arch_set_pc(linux_regs, addr); - else if (compiled_break == 1) - kgdb_arch_set_pc(linux_regs, linux_regs->pc + 4); + kgdb_arch_update_addr(linux_regs, remcom_in_buffer); - compiled_break = 0; + /* + * Received continue command, disable single step + */ + if (kernel_active_single_step()) + kernel_disable_single_step(); + err = 0; + break; + case 's': + /* + * Update step address value with address passed + * with step packet. + * On debug exception return PC is copied to ELR + * So just update PC. + * If no step address is passed, resume from the address + * pointed by PC. Do not update PC + */ + kgdb_arch_update_addr(linux_regs, remcom_in_buffer); + /* + * Enable single step handling + */ + if (!kernel_active_single_step()) + kernel_enable_single_step(linux_regs); err = 0; break; default: @@ -205,6 +235,13 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr, return 0; } +static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr, + unsigned long addr) +{ + kgdb_handle_exception(1, SIGTRAP, 0, regs); + return 0; +} + static struct break_hook kgdb_brkpt_hook = { .esr_mask = 0xffffffff, .esr_val = KGDB_BREAKINST_ESR_VAL, @@ -217,6 +254,10 @@ static struct break_hook kgdb_compiled_brkpt_hook = { .fn = kgdb_compiled_brk_fn }; +static struct step_hook kgdb_step_hook = { + .fn = kgdb_step_brk_fn +}; + static void kgdb_call_nmi_hook(void *ignored) { kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); @@ -272,6 +313,7 @@ int kgdb_arch_init(void) register_break_hook(&kgdb_brkpt_hook); register_break_hook(&kgdb_compiled_brkpt_hook); + register_step_hook(&kgdb_step_hook); return 0; } @@ -286,6 +328,7 @@ void kgdb_arch_exit(void) { unregister_break_hook(&kgdb_brkpt_hook); unregister_break_hook(&kgdb_compiled_brkpt_hook); + unregister_step_hook(&kgdb_step_hook); unregister_die_notifier(&kgdb_notifier); } -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2013-10-11 10:43 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-09-30 9:44 [PATCH v2 0/3] AArch64: KGDB support vijay.kilari at gmail.com 2013-09-30 9:44 ` [PATCH v2 1/3] AArch64: Add single-step and breakpoint handler hooks vijay.kilari at gmail.com 2013-09-30 9:44 ` [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support vijay.kilari at gmail.com 2013-09-30 16:36 ` Will Deacon 2013-10-01 10:53 ` Vijay Kilari 2013-10-02 10:18 ` Will Deacon 2013-10-04 21:51 ` Andrew Pinski 2013-10-07 9:51 ` Will Deacon 2013-10-11 0:24 ` Andrew Pinski 2013-10-11 10:43 ` Will Deacon 2013-09-30 9:44 ` [PATCH v2 3/3] AArch64: KGDB: Add step debugging support vijay.kilari at gmail.com
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.