* Bug 209177 - mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
@ 2020-09-29 10:53 Sundar Nagarajan
0 siblings, 0 replies; 5+ messages in thread
From: Sundar Nagarajan @ 2020-09-29 10:53 UTC (permalink / raw)
To: linux-scsi, Suganath Prabu Subramani, Sathya Prakash Veerichetty,
Sreekanth Reddy, James E.J. Bottomley, Martin K. Petersen,
PDL-MPT-FUSIONLINUX
Sorry if I am mailing too many people.
Copying additional people in the hope that someone has the time to
guide me on how to report, debug and fix this bug in the 5.8 kernel.
bugzilla.kernel org bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=209177
Hardware:
Mainboard: Intel S2600CPj
SAS HBA card: LSI SAS9200-16e 16-port PCIe HBA
VID:PID: 1000:0064
Problem: Does not detect any disks in enclosure
Works in: kernel 5.7.11 (stock, from kernel.org)
Kernel trace:
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: scatter gather:
sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128),
chains_per_io(15)
Sep 06 13:41:45 fili kernel: ------------[ cut here ]------------
Sep 06 13:41:45 fili kernel: WARNING: CPU: 0 PID: 13 at
mm/page_alloc.c:4831 __alloc_pages_nodemask+0x1ce/0x310
Sep 06 13:41:45 fili kernel: Modules linked in: crc32_pclmul
hid_generic(+) ghash_clmulni_intel usbhid igb(+) dca hid aesni_intel
mpt3sas(+) ptp crypto_simd ahci mlx4_core(+) raid_class cryptd
glue_helper x
Sep 06 13:41:45 fili kernel: CPU: 0 PID: 13 Comm: kworker/0:1 Not
tainted 5.8.6 #1
Sep 06 13:41:45 fili kernel: Hardware name: ZTSYSTEM CYPRESS11
/S2600CP , BIOS SE5C600.86B.02.06.0006.032420170950 03/24/2017
Sep 06 13:41:45 fili kernel: Workqueue: events work_for_cpu_fn
Sep 06 13:41:45 fili kernel: RIP: 0010:__alloc_pages_nodemask+0x1ce/0x310
Sep 06 13:41:45 fili kernel: Code: ff ff ff 65 48 8b 04 25 c0 7b 01 00
48 05 78 08 00 00 41 bd 01 00 00 00 48 89 44 24 08 e9 05 ff ff ff 81
e7 00 20 00 00 75 02 <0f> 0b 45 31 ed eb 95 44 8b 64 24 18 65 8b 0
Sep 06 13:41:45 fili kernel: RSP: 0018:ffffacb9400fbc98 EFLAGS: 00010246
Sep 06 13:41:45 fili kernel: RAX: 0000000000000000 RBX:
0000000000000cc0 RCX: 0000000000000000
Sep 06 13:41:45 fili kernel: RDX: 0000000000000000 RSI:
000000000000000b RDI: 0000000000000000
Sep 06 13:41:45 fili kernel: RBP: 000000000075d000 R08:
000000000075d000 R09: ffffffffffffffff
Sep 06 13:41:45 fili kernel: R10: 0000000000000000 R11:
ffff9848de06b1e8 R12: ffffffffffffffff
Sep 06 13:41:45 fili kernel: R13: 0000000000000000 R14:
ffff9848ca1d65d8 R15: ffff9860d65130b0
Sep 06 13:41:45 fili kernel: FS: 0000000000000000(0000)
GS:ffff9848dea00000(0000) knlGS:0000000000000000
Sep 06 13:41:45 fili kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Sep 06 13:41:45 fili kernel: CR2: 00005651c521b0e8 CR3:
0000001ed260a005 CR4: 00000000000606f0
Sep 06 13:41:45 fili kernel: Call Trace:
Sep 06 13:41:45 fili kernel: dma_direct_alloc_pages+0x171/0x2a0
Sep 06 13:41:45 fili kernel: dma_pool_alloc+0xd0/0x1c0
Sep 06 13:41:45 fili kernel: base_alloc_rdpq_dma_pool+0x118/0x1d0 [mpt3sas]
Sep 06 13:41:45 fili kernel: _base_allocate_memory_pools+0x2d6/0x1240 [mpt3sas]
Sep 06 13:41:45 fili kernel: mpt3sas_base_attach+0x4a4/0x930 [mpt3sas]
Sep 06 13:41:45 fili kernel: _scsih_probe+0x4e3/0x920 [mpt3sas]
Sep 06 13:41:45 fili kernel: local_pci_probe+0x42/0x90
Sep 06 13:41:45 fili kernel: work_for_cpu_fn+0x16/0x20
Sep 06 13:41:45 fili kernel: process_one_work+0x208/0x400
Sep 06 13:41:45 fili kernel: worker_thread+0x221/0x3e0
Sep 06 13:41:45 fili kernel: ? process_one_work+0x400/0x400
Sep 06 13:41:45 fili kernel: kthread+0x117/0x130
Sep 06 13:41:45 fili kernel: ? kthread_park+0x90/0x90
Sep 06 13:41:45 fili kernel: ret_from_fork+0x22/0x30
Sep 06 13:41:45 fili kernel: ---[ end trace 38d2eb3ff4b32c0c ]---
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: failure at
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
On kernel 5.8.6 - mpt[23]sas NOT working:
Only lines with mpt[23]sas:
Sep 06 13:41:45 fili kernel: Command line:
BOOT_IMAGE=/boot/vmlinuz-5.8.6 root=/dev/mapper/fili0-rootfs ro
console=ttyS0,115200n1 console=tty0 mpt2sas.msix_disable=1
mpt3sas.msix_disable=1
Sep 06 13:41:45 fili kernel: Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-5.8.6 root=/dev/mapper/fili0-rootfs ro
console=ttyS0,115200n1 console=tty0 mpt2sas.msix_disable=1
mpt3sas.msix_disable=1
Sep 06 13:41:45 fili kernel: mpt3sas version 34.100.00.00 loaded
Sep 06 13:41:45 fili kernel: mpt3sas 0000:02:00.0: can't disable ASPM;
OS doesn't have ASPM control
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: 64 BIT PCI BUS DMA
ADDRESSING SUPPORTED, total mem (197972228 kB)
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: CurrentHostPageSize is 0:
Setting default host page size to 4k
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: High IOPs queues : disabled
Sep 06 13:41:45 fili kernel: mpt2sas0: IO-APIC enabled: IRQ 54
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: iomem(0x00000000d1380000),
mapped(0x(____ptrval____)), size(16384)
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: ioport(0x0000000000002000), size(256)
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: CurrentHostPageSize is 0:
Setting default host page size to 4k
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: scatter gather:
sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128),
chains_per_io(15)
Sep 06 13:41:45 fili kernel: Modules linked in: crc32_pclmul
hid_generic(+) ghash_clmulni_intel usbhid igb(+) dca hid aesni_intel
mpt3sas(+) ptp crypto_simd ahci mlx4_core(+) raid_class cryptd
glue_helper xhci_pci pps_core uas libahci i2c_algo_bit
xhci_pci_renesas scsi_transport_sas wmi usb_storage deflate
Sep 06 13:41:45 fili kernel: base_alloc_rdpq_dma_pool+0x118/0x1d0 [mpt3sas]
Sep 06 13:41:45 fili kernel: _base_allocate_memory_pools+0x2d6/0x1240 [mpt3sas]
Sep 06 13:41:45 fili kernel: mpt3sas_base_attach+0x4a4/0x930 [mpt3sas]
Sep 06 13:41:45 fili kernel: _scsih_probe+0x4e3/0x920 [mpt3sas]
Sep 06 13:41:45 fili kernel: mpt2sas_cm0: failure at
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
On kernel 5.7.11 - mpt[23]sas IS working
Only lines with mpt[23]sas:
Sep 06 13:49:36 fili kernel: Command line:
BOOT_IMAGE=/boot/vmlinuz-5.7.11 root=/dev/mapper/fili0-rootfs ro
console=ttyS0,115200n1 console=tty0 mpt2sas.msix_disable=1
mpt3sas.msix_disable=1
Sep 06 13:49:36 fili kernel: Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-5.7.11 root=/dev/mapper/fili0-rootfs ro
console=ttyS0,115200n1 console=tty0 mpt2sas.msix_disable=1
mpt3sas.msix_disable=1
Sep 06 13:49:36 fili kernel: mpt3sas version 33.100.00.00 loaded
Sep 06 13:49:36 fili kernel: mpt3sas 0000:02:00.0: can't disable ASPM;
OS doesn't have ASPM control
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: 64 BIT PCI BUS DMA
ADDRESSING SUPPORTED, total mem (197972264 kB)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: CurrentHostPageSize is 0:
Setting default host page size to 4k
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: High IOPs queues : disabled
Sep 06 13:49:36 fili kernel: mpt2sas0: IO-APIC enabled: IRQ 55
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: iomem(0x00000000d1380000),
mapped(0x(____ptrval____)), size(16384)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: ioport(0x0000000000002000), size(256)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: CurrentHostPageSize is 0:
Setting default host page size to 4k
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: scatter gather:
sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128),
chains_per_io(15)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: request
pool(0x(____ptrval____)) - dma(0x17c9400000): depth(30127),
frame_size(128), pool_size(3765 kB)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: sense
pool(0x(____ptrval____))- dma(0x17c4c00000):
depth(29868),element_size(96), pool_size(2800 kB)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: config
page(0x(____ptrval____)) - dma(0x17c509c000): size(512)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: Allocated physical memory:
size(14663 kB)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: Current Controller Queue
Depth(29865),Max Controller Queue Depth(32455)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: Scatter Gather Elements per IO(128)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: overriding NVDATA EEDPTagMode setting
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: LSISAS2116:
FWVersion(20.00.06.00), ChipRevision(0x02), BiosVersion(00.00.00.00)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: Protocol=(Initiator,Target),
Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set
Full,NCQ)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: sending port enable !!
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: host_add: handle(0x0001),
sas_addr(0x500062b20038b300), phys(16)
Sep 06 13:49:36 fili kernel: mpt2sas_cm0: expander_add:
handle(0x0011), parent(0x0001), sas_addr(0x5001940000d2c23f), phys(25)
Sep 06 13:49:37 fili kernel: mpt2sas_cm0: port enable: SUCCESS
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug 209177 - mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
2020-09-30 14:01 ` Suganath Prabu Subramani
@ 2020-09-30 18:58 ` Sundar Nagarajan
0 siblings, 0 replies; 5+ messages in thread
From: Sundar Nagarajan @ 2020-09-30 18:58 UTC (permalink / raw)
To: Suganath Prabu Subramani
Cc: linux-scsi, Sathya Prakash Veerichetty, Sreekanth Reddy,
James E.J. Bottomley, Martin K. Petersen, PDL-MPT-FUSIONLINUX
[-- Attachment #1: Type: text/plain, Size: 17981 bytes --]
Hi Suganath,
Your proposed idea worked!
I used the unmodified 5.8.12 kernel from my previous test, and just
add the following kernel command line parameters:
'mpt3sas.logging_level=0x3f8 mpt3sas.max_queue_depth=10000'. All the
drives in my SAS enclosure were detected and everything seems ot be
working fine.
I am attaching the full dmesg from this run.
Thank you!
On Wed, Sep 30, 2020 at 6:57 AM Suganath Prabu Subramani
<suganath-prabu.subramani@broadcom.com> wrote:
>
> Hi Sundar,
>
> Thanks for the logs,
> From log, I could see that the HBA queue depth is very high "32455" as
> shown below.
> [ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128).
>
> In this patch "https://patchwork.kernel.org/patch/11505139/" driver is
> allocating the
> DMA-able memory for RDPQ's in sets of 16 reply queues using limitation
> of Ventura
> series controller.
>
> With 32455 queue depth and above patch, Driver may request a large DMA-able
> memory where the kernel may fail to allocate.
>
> To confirm this, Please try by tuning the queue depth to 8000/10000 using the
> module parameter "mpt3sas.max_queue_depth=10000".
>
> Thanks,
> Suganath
>
>
> On Wed, Sep 30, 2020 at 7:22 PM Suganath Prabu Subramani
> <suganath-prabu.subramani@broadcom.com> wrote:
> >
> > Hi Sundar,
> >
> > Thanks for the logs,
> > From log, i could see that HBA queue depth is very high "32455" as shown below.
> > [ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128).
> >
> > In this patch "https://patchwork.kernel.org/patch/11505139/" driver is allocating the
> > DMA-able memory for RDPQ's in sets of 16 reply queues using limitation of Ventura
> > series controller.
> >
> > With 32455 queue depth and above patch driver may request a large DMA-able
> > memory where kernel may fail to allocate.
> >
> > To confirm this, Please try by tuning the queue depth to 8000/10000 using the
> > module parameter "mpt3sas.max_queue_depth=10000".
> >
> > Thanks,
> > Suganath
> >
> > On Wed, Sep 30, 2020 at 1:34 AM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
> >>
> >> Thanks for your suggestions.
> >>
> >> I downloaded and used stock kernel 5.8.12 from kernel.org.
> >> The two patches you pointed at are already applied in 5.8.12 (as you
> >> had indicated).
> >>
> >> The problem still exists.
> >> EDITED dmesg below, full dmesg output attached
> >> I have also updated my kernel bugzilla report:
> >> https://bugzilla.kernel.org/show_bug.cgi?id=209177
> >>
> >>
> >> [ 10.110816] mpt2sas_cm0: mpt3sas_base_attach
> >> [ 10.110913] dca service started, version 1.12.1
> >> [ 10.122668] mpt2sas_cm0: mpt3sas_base_map_resources
> >> [ 10.140735] usb 2-1.7: New USB device found, idVendor=1546,
> >> idProduct=01a6, bcdDevice= 7.03
> >> [ 10.147693] scsi host2: ahci
> >> [ 10.163432] usb 2-1.7: New USB device strings: Mfr=1, Product=2,
> >> SerialNumber=0
> >> [ 10.173819] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED,
> >> total mem (197972228 kB)
> >> [ 10.189366] usb 2-1.7: Product: u-blox 6 - GPS Receiver
> >> [ 10.206466] mpt2sas_cm0: _base_get_ioc_facts
> >> [ 10.219986] usb 2-1.7: Manufacturer: u-blox AG - www.u-blox.com
> >> [ 10.246805] mpt2sas_cm0: _base_wait_for_iocstate
> >> [ 10.260177] scsi host3: ahci
> >> [ 10.271074] scsi host4: ahci
> >> [ 10.281958] scsi host5: ahci
> >> [ 10.292565] scsi host6: ahci
> >> [ 10.299138] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
> >> [ 10.303153] scsi host7: ahci
> >> [ 10.328158] ata1: SATA max UDMA/133 abar m2048@0xd1700000 port
> >> 0xd1700100 irq 53
> >> [ 10.343989] ata2: SATA max UDMA/133 abar m2048@0xd1700000 port
> >> 0xd1700180 irq 53
> >> [ 10.359546] ata3: SATA max UDMA/133 abar m2048@0xd1700000 port
> >> 0xd1700200 irq 53
> >> [ 10.374807] ata4: SATA max UDMA/133 abar m2048@0xd1700000 port
> >> 0xd1700280 irq 53
> >> [ 10.389813] ata5: SATA max UDMA/133 abar m2048@0xd1700000 port
> >> 0xd1700300 irq 53
> >> [ 10.404635] ata6: SATA max UDMA/133 abar m2048@0xd1700000 port
> >> 0xd1700380 irq 53
> >> [ 10.412371] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit
> >> 1.00 PQ: 0 ANSI: 6
> >> [ 10.433718] usb 2-1.8: New USB device found, idVendor=051d,
> >> idProduct=0003, bcdDevice= 1.06
> >> [ 10.435546] sd 0:0:0:0: Attached scsi generic sg0 type 0
> >> [ 10.450887] usb 2-1.8: New USB device strings: Mfr=1, Product=2,
> >> SerialNumber=3
> >> [ 10.464152] offset:data
> >> [ 10.478544] usb 2-1.8: Product: Smart-UPS 2200 FW:UPS 06.3 / MCU 11.0
> >> [ 10.488004] mpt2sas_cm0: [0x00]:03100200
> >> [ 10.488004] mpt2sas_cm0: [0x04]:00002300
> >> [ 10.488005] mpt2sas_cm0: [0x08]:00000000
> >> [ 10.488005] mpt2sas_cm0: [0x0c]:00000000
> >> [ 10.488006] mpt2sas_cm0: [0x10]:00000000
> >> [ 10.488007] mpt2sas_cm0: [0x14]:00010080
> >> [ 10.488007] mpt2sas_cm0: [0x18]:22137ec7
> >> [ 10.488008] mpt2sas_cm0: [0x1c]:0001285c
> >> [ 10.488017] mpt2sas_cm0: [0x20]:14000600
> >> [ 10.501945] usb 2-1.8: Manufacturer: American Power Conversion
> >> [ 10.501961] usb 2-1.8: SerialNumber: JS1051006712
> >> [ 10.513140] mpt2sas_cm0: [0x24]:00000020
> >> [ 10.513140] mpt2sas_cm0: [0x28]:04000020
> >> [ 10.513141] mpt2sas_cm0: [0x2c]:00810080
> >> [ 10.513141] mpt2sas_cm0: [0x30]:007f0003
> >> [ 10.513142] mpt2sas_cm0: [0x34]:0020ffe0
> >> [ 10.513154] mpt2sas_cm0: [0x38]:008004b0
> >> [ 10.513154] mpt2sas_cm0: [0x3c]:00000011
> >> [ 10.513155] mpt2sas_cm0: [0x40]:00000000
> >> [ 10.513156] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default
> >> host page size to 4k
> >> [ 10.524350] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks:
> >> (15.4 GB/14.3 GiB)
> >> [ 10.535178] mpt2sas_cm0: CurrentHostPageSize(0)
> >> [ 10.548205] sd 0:0:0:0: [sda] Write Protect is off
> >> [ 10.556610] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
> >> [ 10.566972] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
> >> [ 10.577132] mpt2sas_cm0: request frame size(128), reply frame size(128)
> >> [ 10.589074] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
> >> enabled, doesn't support DPO or FUA
> >> [ 10.597175] mpt2sas_cm0: msix is supported, vector_count(1)
> >> [ 10.692084] hid: raw HID events driver (C) Jiri Kosina
> >> [ 10.692148] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
> >> [ 10.692149] igb: Copyright (c) 2007-2014 Intel Corporation.
> >> [ 10.705215] mpt2sas_cm0: MSI-X vectors supported: 1
> >> [ 10.705216] no of cores: 32, max_msix_vectors: -1
> >> [ 10.705217] mpt2sas_cm0: 0 1
> >> [ 10.705359] mpt2sas_cm0: High IOPs queues : disabled
> >> [ 10.757534] ata4: SATA link down (SStatus 0 SControl 300)
> >> [ 10.761609] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 56
> >> [ 10.761611] mpt2sas_cm0: iomem(0x00000000d1380000),
> >> mapped(0x(____ptrval____)), size(16384)
> >> [ 10.761613] mpt2sas_cm0: ioport(0x0000000000002000), size(256)
> >> [ 10.781648] ata1: SATA link down (SStatus 0 SControl 300)
> >> [ 10.793026] mpt2sas_cm0: _base_get_ioc_facts
> >> [ 10.804281] ata6: SATA link down (SStatus 0 SControl 300)
> >> [ 10.817492] mpt2sas_cm0: _base_wait_for_iocstate
> >> [ 10.821742] usbcore: registered new interface driver usbhid
> >> [ 10.821743] usbhid: USB HID core driver
> >> [ 10.829361] ata3: SATA link down (SStatus 0 SControl 300)
> >> [ 10.906674] offset:data
> >> [ 10.917639] ata5: SATA link down (SStatus 0 SControl 300)
> >> [ 10.917791] input: American Megatrends Inc. Virtual Keyboard and
> >> Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046B:FF10.0001/input/input2
> >> [ 10.917893] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID
> >> v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse]
> >> on usb-0000:00:1d.0-1.4/input0
> >> [ 10.918019] input: American Megatrends Inc. Virtual Keyboard and
> >> Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046B:FF10.0002/input/input3
> >> [ 10.918245] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID
> >> v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
> >> usb-0000:00:1d.0-1.4/input1
> >> [ 10.918692] hid-generic 0003:051D:0003.0003: hiddev0,hidraw2: USB
> >> HID v1.00 Device [American Power Conversion Smart-UPS 2200 FW:UPS 06.3
> >> / MCU 11.0] on usb-0000:00:1d.0-1.8/input0
> >> [ 10.925117] random: fast init done
> >> [ 10.929067] mpt2sas_cm0: [0x00]:03100200
> >> [ 10.939600] ata2: SATA link down (SStatus 0 SControl 300)
> >> [ 10.951294] mpt2sas_cm0: [0x04]:00002300
> >> [ 10.984639] sda: sda1 sda2 sda3
> >> [ 10.985180] mpt2sas_cm0: [0x08]:00000000
> >> [ 11.005873] sd 0:0:0:0: [sda] Attached SCSI removable disk
> >> [ 11.006343] mpt2sas_cm0: [0x0c]:00000000
> >> [ 11.285853] mpt2sas_cm0: [0x10]:00000000
> >> [ 11.298311] mpt2sas_cm0: [0x14]:00010080
> >> [ 11.310617] mpt2sas_cm0: [0x18]:22137ec7
> >> [ 11.322831] mpt2sas_cm0: [0x1c]:0001285c
> >> [ 11.334964] mpt2sas_cm0: [0x20]:14000600
> >> [ 11.347072] mpt2sas_cm0: [0x24]:00000020
> >> [ 11.359060] mpt2sas_cm0: [0x28]:04000020
> >> [ 11.370880] mpt2sas_cm0: [0x2c]:00810080
> >> [ 11.382482] mpt2sas_cm0: [0x30]:007f0003
> >> [ 11.393927] mpt2sas_cm0: [0x34]:0020ffe0
> >> [ 11.405226] mpt2sas_cm0: [0x38]:008004b0
> >> [ 11.416400] mpt2sas_cm0: [0x3c]:00000011
> >> [ 11.427427] mpt2sas_cm0: [0x40]:00000000
> >> [ 11.438335] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default
> >> host page size to 4k
> >> [ 11.453888] mpt2sas_cm0: CurrentHostPageSize(0)
> >> [ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
> >> [ 11.479358] mpt2sas_cm0: request frame size(128), reply frame size(128)
> >> [ 11.493291] mpt2sas_cm0: _base_make_ioc_ready
> >> [ 11.507135] mpt2sas_cm0: _base_get_port_facts
> >> [ 11.519349] igb 0000:07:00.0: added PHC on eth0
> >> [ 11.530468] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
> >> [ 11.544129] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:e9
> >> [ 11.558034] igb 0000:07:00.0: eth0: PBA No: 100000-000
> >> [ 11.569355] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx
> >> queue(s), 8 tx queue(s)
> >> [ 11.616691] offset:data
> >> [ 11.624765] mpt2sas_cm0: [0x00]:05070000
> >> [ 11.634321] mpt2sas_cm0: [0x04]:00000000
> >> [ 11.643579] mpt2sas_cm0: [0x08]:00000000
> >> [ 11.652537] mpt2sas_cm0: [0x0c]:00000000
> >> [ 11.661248] mpt2sas_cm0: [0x10]:00000000
> >> [ 11.669892] mpt2sas_cm0: [0x14]:00003000
> >> [ 11.678382] mpt2sas_cm0: [0x18]:00000100
> >> [ 11.686741] mpt2sas_cm0: _base_allocate_memory_pools
> >> [ 11.696171] mpt2sas_cm0: scatter gather: sge_in_main_msg(1),
> >> sge_per_chain(9), sge_per_io(128), chains_per_io(15)
> >> [ 11.715890] ------------[ cut here ]------------
> >> [ 11.725227] WARNING: CPU: 0 PID: 5 at mm/page_alloc.c:4831
> >> __alloc_pages_nodemask+0x1ce/0x310
> >> [ 11.739330] Modules linked in: fjes(-) hid_generic usbhid hid
> >> crct10dif_pclmul igb(+) crc32_pclmul ghash_clmulni_intel dca
> >> aesni_intel ptp ahci crypto_simd mpt3sas(+) pps_core xhci_pci cryptd
> >> mlx4_core(+) raid_class i2c_algo_bit libahci xhci_pci_renesas
> >> glue_helper scsi_transport_sas wmi uas usb_storage deflate
> >> [ 11.791023] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.8.12 #1
> >> [ 11.803622] Hardware name: ZTSYSTEM CYPRESS11 /S2600CP ,
> >> BIOS SE5C600.86B.02.06.0006.032420170950 03/24/2017
> >> [ 11.827610] Workqueue: events work_for_cpu_fn
> >> [ 11.838884] RIP: 0010:__alloc_pages_nodemask+0x1ce/0x310
> >> [ 11.851367] Code: ff ff ff 65 48 8b 04 25 c0 7b 01 00 48 05 78 08
> >> 00 00 41 bd 01 00 00 00 48 89 44 24 08 e9 05 ff ff ff 81 e7 00 20 00
> >> 00 75 02 <0f> 0b 45 31 ed eb 95 44 8b 64 24 18 65 8b 05 1f a6 7a 4b 89
> >> c0 48
> >> [ 11.893686] RSP: 0018:ffffc18e000bbc98 EFLAGS: 00010246
> >> [ 11.906822] RAX: 0000000000000000 RBX: 0000000000000cc0 RCX: 0000000000000000
> >> [ 11.922228] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
> >> [ 11.937510] RBP: 000000000075d000 R08: 000000000075d000 R09: ffffffffffffffff
> >> [ 11.952755] R10: 0000000000000000 R11: ffff9e6a16c22350 R12: ffffffffffffffff
> >> [ 11.967942] R13: 0000000000000000 R14: ffff9e5215c34f58 R15: ffff9e52163590b0
> >> [ 11.983165] FS: 0000000000000000(0000) GS:ffff9e521ea00000(0000)
> >> knlGS:0000000000000000
> >> [ 11.999566] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >> [ 12.013320] CR2: 000055c7853e9ef0 CR3: 00000003d620a003 CR4: 00000000000606f0
> >> [ 12.028719] Call Trace:
> >> [ 12.038777] dma_direct_alloc_pages+0x171/0x2a0
> >> [ 12.051185] dma_pool_alloc+0xd0/0x1c0
> >> [ 12.062585] base_alloc_rdpq_dma_pool+0x118/0x1d0 [mpt3sas]
> >> [ 12.076131] _base_allocate_memory_pools+0x2d6/0x1240 [mpt3sas]
> >> [ 12.090232] mpt3sas_base_attach+0x4a4/0x930 [mpt3sas]
> >> [ 12.103599] _scsih_probe+0x4e3/0x920 [mpt3sas]
> >> [ 12.116383] local_pci_probe+0x42/0x90
> >> [ 12.128401] work_for_cpu_fn+0x16/0x20
> >> [ 12.140466] process_one_work+0x208/0x400
> >> [ 12.152910] worker_thread+0x221/0x3e0
> >> [ 12.165053] ? process_one_work+0x400/0x400
> >> [ 12.177573] kthread+0x117/0x130
> >> [ 12.188759] ? kthread_park+0x90/0x90
> >> [ 12.200400] ret_from_fork+0x22/0x30
> >> [ 12.211748] ---[ end trace 1d2f9a5394100a7e ]---
> >> [ 12.224134] mpt2sas_cm0: mpt3sas_base_free_resources
> >> [ 12.237582] mpt2sas_cm0: _base_make_ioc_ready
> >> [ 12.249253] mpt2sas_cm0: mpt3sas_base_unmap_resources
> >> [ 12.264417] igb 0000:07:00.1: added PHC on eth1
> >> [ 12.276024] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
> >> [ 12.290184] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:ea
> >> [ 12.304604] igb 0000:07:00.1: eth1: PBA No: 100000-000
> >> [ 12.316624] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx
> >> queue(s), 8 tx queue(s)
> >> [ 12.331505] mpt2sas_cm0: _base_release_memory_pools
> >> [ 12.343209] mpt2sas_cm0: failure at
> >> drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
> >>
> >> On Tue, Sep 29, 2020 at 8:00 AM Suganath Prabu Subramani
> >> <suganath-prabu.subramani@broadcom.com> wrote:
> >> >
> >> > Hi Sundar,
> >> >
> >> > Please check if below two patches are available in the mpt3sas driver
> >> > you are using.
> >> > If you are seeing issues with these patches applied (Or) If your
> >> > driver is already having mentioned patches, provide us driver log with
> >> > "mpt3sas.logging_level=0x3f8”.
> >> >
> >> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=61e6ba03ea26f0205e535862009ff6ffdbf4de0c
> >> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=f56577e8c7d0f3054f97d1f0d1cbe9a4d179cc47
> >> >
> >> > I could see these patches in 5.8.12
> >> > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/scsi/mpt3sas/mpt3sas_base.c?h=v5.8.12.
> >> >
> >> > Thanks,
> >> > Suganath
> >> >
> >> >
> >> > On Tue, Sep 29, 2020 at 4:18 PM Sundar Nagarajan
> >> > <sun.nagarajan@gmail.com> wrote:
> >> > >
> >> > > Sorry if I am mailing too many people.
> >> > > Copying additional people in the hope that someone has the time to guide me on how to report, debug and fix this bug in the 5.8 kernel.
> >> > >
> >> > > bugzilla.kernel org bug report:
> >> > > https://bugzilla.kernel.org/show_bug.cgi?id=209177
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > On Tue, Sep 22, 2020 at 7:08 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
> >> > >>
> >> > >> Any guidance on how I should go about trying with the 35.100.00.00 driver?
> >> > >> In particular:
> >> > >>
> >> > >> Which patch do I apply?
> >> > >> Which kernel version do I apply the patch to?
> >> > >>
> >> > >> Regards,
> >> > >> Sundar
> >> > >>
> >> > >>
> >> > >> On Thu, Sep 10, 2020 at 10:51 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
> >> > >>>
> >> > >>> Hi Suganath,
> >> > >>>
> >> > >>> Thank you for the quick reply.
> >> > >>>
> >> > >>> I am a bit of a newbie in pllying linux kernel patches etc.
> >> > >>>
> >> > >>> Would I apply this patch to the stock (5.8.8) kernel.org kernel:
> >> > >>> https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/commit/?h=5.10/scsi-queue
> >> > >>>
> >> > >>> Sundar
> >> > >>>
> >> > >>>
> >> > >>>
> >> > >>> On Thu, Sep 10, 2020 at 10:46 PM Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> wrote:
> >> > >>>>
> >> > >>>> Hi Sundar,
> >> > >>>>
> >> > >>>> Can you please try with the latest driver 35.100.00.00. => "https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/tree/?h=5.10/scsi-queue"
> >> > >>>> This has fixes related to "RDPQ" scsi: mpt3sas: Fix reply queue count in non RDPQ mode.
> >> > >>>> scsi: mpt3sas: Fix memset() in non-RDPQ mode.
> >> > >>>>
> >> > >>>> Thanks,
> >> > >>>> Suganath
> >> > >>>>
> >> > >>>> On Fri, Sep 11, 2020 at 10:00 AM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
> >> > >>>>>
> >> > >>>>> I am new to reporting linux kernel bugs.
> >> > >>>>> Apologies if this is sent to you in error.
> >> > >>>>> I got your email using: `perl scripts/get_maintainer.pl -f
> >> > >>>>> drivers/scsi/mpt3sas/mpt3sas_scsih.c` as indicated in
> >> > >>>>> https://www.kernel.org/doc/html/latest/admin-guide/reporting-bugs.html
> >> > >>>>>
> >> > >>>>> bugzilla.kernel org bug report:
> >> > >>>>> https://bugzilla.kernel.org/show_bug.cgi?id=209177
[-- Attachment #2: dmesg.mpt3sas.max_queue_depth.20200930 --]
[-- Type: application/octet-stream, Size: 174097 bytes --]
[ 0.000000] Linux version 5.8.12 (sundar@smaug) (gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1 SMP Tue Sep 29 12:04:04 PDT 2020
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.12 root=/dev/mapper/fili0-rootfs ro console=ttyS0,115200n1 console=tty0 mpt3sas.logging_level=0x3f8 mpt3sas.max_queue_depth=10000
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bad33fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad34000-0x00000000baf84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baf85000-0x00000000bafb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bafb7000-0x00000000bafcbfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bafcc000-0x00000000bb3d3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb3d4000-0x00000000bb483fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bb484000-0x00000000bdd2efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdd2f000-0x00000000bddccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bddcd000-0x00000000bdea0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdea1000-0x00000000bdf2efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf2f000-0x00000000bdfa9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdfaa000-0x00000000bdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000303fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
BIOS ID: SE5C600.86B.02.06.0006.201703240950
[ 0.000000] efi: ACPI 2.0=0xbdfa9f98 SMBIOS=0xf0440
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: ZTSYSTEM CYPRESS11 /S2600CP , BIOS SE5C600.86B.02.06.0006.032420170950 03/24/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.624 MHz processor
[ 0.000840] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000842] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000849] last_pfn = 0x3040000 max_arch_pfn = 0x400000000
[ 0.000855] MTRR default type: uncachable
[ 0.000856] MTRR fixed ranges enabled:
[ 0.000857] 00000-9FFFF write-back
[ 0.000858] A0000-BFFFF uncachable
[ 0.000859] C0000-DFFFF write-through
[ 0.000859] E0000-FFFFF write-protect
[ 0.000860] MTRR variable ranges enabled:
[ 0.000862] 0 base 000000000000 mask 3FFF80000000 write-back
[ 0.000863] 1 base 000080000000 mask 3FFFC0000000 write-back
[ 0.000864] 2 base 000100000000 mask 3FFF00000000 write-back
[ 0.000865] 3 base 000200000000 mask 3FFE00000000 write-back
[ 0.000866] 4 base 000400000000 mask 3FFC00000000 write-back
[ 0.000867] 5 base 000800000000 mask 3FF800000000 write-back
[ 0.000868] 6 base 001000000000 mask 3FF000000000 write-back
[ 0.000868] 7 base 002000000000 mask 3FF000000000 write-back
[ 0.000869] 8 base 003000000000 mask 3FFFC0000000 write-back
[ 0.000870] 9 disabled
[ 0.001516] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002373] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.002379] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.014692] found SMP MP-table at [mem 0x000fd300-0x000fd30f]
[ 0.014723] check: Scanning 1 areas for low memory corruption
[ 0.014731] Using GB pages for direct mapping
[ 0.014996] Secure boot could not be determined
[ 0.014998] RAMDISK: [mem 0x307b4000-0x343d1fff]
[ 0.015003] ACPI: Early table checksum verification disabled
[ 0.015006] ACPI: RSDP 0x00000000BDFA9F98 000024 (v02 INTEL )
[ 0.015010] ACPI: XSDT 0x00000000BDFA7D98 0000CC (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015016] ACPI: FACP 0x00000000BDFA7918 0000F4 (v04 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015021] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20200528/tbfadt-674)
[ 0.015025] ACPI: DSDT 0x00000000BDF91018 0146C3 (v02 INTEL S2600CP 00000006 INTL 20100331)
[ 0.015029] ACPI: FACS 0x00000000BDFA7F40 000040
[ 0.015032] ACPI: APIC 0x00000000BDFA6018 000BAA (v03 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015035] ACPI: SPMI 0x00000000BDFA9A98 000041 (v05 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015039] ACPI: FPDT 0x00000000BDFA9A18 000044 (v01 INTEL S2600CP 00000000 00000000)
[ 0.015042] ACPI: MCFG 0x00000000BDFA9F18 00003C (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015046] ACPI: WDDT 0x00000000BDFA9E98 000040 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015049] ACPI: SRAT 0x00000000BDF8EC18 0002A8 (v03 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015053] ACPI: SLIT 0x00000000BDFA9E18 000030 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015056] ACPI: MSCT 0x00000000BDFA8E18 000090 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015059] ACPI: HPET 0x00000000BDFA9D98 000038 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015063] ACPI: SSDT 0x00000000BDFA9C98 00002B (v02 INTEL S2600CP 00001000 INTL 20100331)
[ 0.015066] ACPI: SSDT 0x00000000BDDCD018 0D30C8 (v02 INTEL S2600CP 00004000 INTL 20100331)
[ 0.015070] ACPI: DMAR 0x00000000BDFA7618 000118 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015074] ACPI: SPCR 0x00000000BDFA9D18 000050 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.015078] ACPI: HEST 0x00000000BDF90F18 0000A8 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.015081] ACPI: BERT 0x00000000BDFA9B98 000030 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.015084] ACPI: ERST 0x00000000BDF90C98 000230 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.015088] ACPI: EINJ 0x00000000BDFA7C18 000130 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.015091] ACPI: SSDT 0x00000000BDF8C018 001729 (v02 INTEL S2600CP 00000002 INTL 20100331)
[ 0.015095] ACPI: SSDT 0x00000000BDFA9C18 000045 (v02 INTEL S2600CP 00000001 INTL 20100331)
[ 0.015098] ACPI: SSDT 0x00000000BDF8FE18 000181 (v02 INTEL S2600CP 00000003 INTL 20100331)
[ 0.015108] ACPI: Local APIC address 0xfee00000
[ 0.015137] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.015138] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.015139] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.015140] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.015141] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.015142] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.015143] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.015144] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.015145] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.015146] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.015147] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.015148] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ 0.015149] SRAT: PXM 0 -> APIC 0x0c -> Node 0
[ 0.015150] SRAT: PXM 0 -> APIC 0x0d -> Node 0
[ 0.015150] SRAT: PXM 0 -> APIC 0x0e -> Node 0
[ 0.015151] SRAT: PXM 0 -> APIC 0x0f -> Node 0
[ 0.015153] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.015154] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ 0.015155] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.015155] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ 0.015156] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ 0.015157] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[ 0.015158] SRAT: PXM 1 -> APIC 0x26 -> Node 1
[ 0.015159] SRAT: PXM 1 -> APIC 0x27 -> Node 1
[ 0.015160] SRAT: PXM 1 -> APIC 0x28 -> Node 1
[ 0.015161] SRAT: PXM 1 -> APIC 0x29 -> Node 1
[ 0.015162] SRAT: PXM 1 -> APIC 0x2a -> Node 1
[ 0.015163] SRAT: PXM 1 -> APIC 0x2b -> Node 1
[ 0.015164] SRAT: PXM 1 -> APIC 0x2c -> Node 1
[ 0.015165] SRAT: PXM 1 -> APIC 0x2d -> Node 1
[ 0.015166] SRAT: PXM 1 -> APIC 0x2e -> Node 1
[ 0.015167] SRAT: PXM 1 -> APIC 0x2f -> Node 1
[ 0.015171] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff]
[ 0.015172] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x183fffffff]
[ 0.015173] ACPI: SRAT: Node 1 PXM 1 [mem 0x1840000000-0x303fffffff]
[ 0.015177] NUMA: Initialized distance table, cnt=2
[ 0.015180] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x183fffffff] -> [mem 0x00000000-0x183fffffff]
[ 0.015184] NODE_DATA(0) allocated [mem 0x183fffb000-0x183fffffff]
[ 0.015190] NODE_DATA(1) allocated [mem 0x303fffa000-0x303fffefff]
[ 0.015440] Zone ranges:
[ 0.015441] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015443] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015445] Normal [mem 0x0000000100000000-0x000000303fffffff]
[ 0.015446] Device empty
[ 0.015447] Movable zone start for each node
[ 0.015449] Early memory node ranges
[ 0.015450] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.015451] node 0: [mem 0x0000000000100000-0x00000000bad33fff]
[ 0.015453] node 0: [mem 0x00000000baf85000-0x00000000bafb6fff]
[ 0.015454] node 0: [mem 0x00000000bafcc000-0x00000000bb3d3fff]
[ 0.015455] node 0: [mem 0x00000000bdfaa000-0x00000000bdffffff]
[ 0.015456] node 0: [mem 0x0000000100000000-0x000000183fffffff]
[ 0.015465] node 1: [mem 0x0000001840000000-0x000000303fffffff]
[ 0.015748] Zeroed struct page in unavailable ranges: 20125 pages
[ 0.015749] Initmem setup node 0 [mem 0x0000000000001000-0x000000183fffffff]
[ 0.015751] On node 0 totalpages: 25145699
[ 0.015752] DMA zone: 64 pages used for memmap
[ 0.015753] DMA zone: 26 pages reserved
[ 0.015754] DMA zone: 3999 pages, LIFO batch:0
[ 0.015794] DMA32 zone: 11912 pages used for memmap
[ 0.015794] DMA32 zone: 762308 pages, LIFO batch:63
[ 0.023753] Normal zone: 380928 pages used for memmap
[ 0.023756] Normal zone: 24379392 pages, LIFO batch:63
[ 0.314276] Initmem setup node 1 [mem 0x0000001840000000-0x000000303fffffff]
[ 0.314282] On node 1 totalpages: 25165824
[ 0.314284] Normal zone: 393216 pages used for memmap
[ 0.314285] Normal zone: 25165824 pages, LIFO batch:63
[ 0.648650] ACPI: PM-Timer IO Port: 0x408
[ 0.648657] ACPI: Local APIC address 0xfee00000
[ 0.648684] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.648698] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.648702] IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 24-47
[ 0.648707] IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 48-71
[ 0.648713] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.648716] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.648718] ACPI: IRQ0 used by override.
[ 0.648719] ACPI: IRQ9 used by override.
[ 0.648723] Using ACPI (MADT) for SMP configuration information
[ 0.648726] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.648734] ACPI: SPCR: SPCR table version 1
[ 0.648737] ACPI: SPCR: console: uart,io,0x3f8,115200
[ 0.648741] TSC deadline timer available
[ 0.648743] smpboot: Allowing 152 CPUs, 120 hotplug CPUs
[ 0.648784] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.648786] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.648789] PM: hibernation: Registered nosave memory: [mem 0xbad34000-0xbaf84fff]
[ 0.648791] PM: hibernation: Registered nosave memory: [mem 0xbafb7000-0xbafcbfff]
[ 0.648793] PM: hibernation: Registered nosave memory: [mem 0xbb3d4000-0xbb483fff]
[ 0.648795] PM: hibernation: Registered nosave memory: [mem 0xbb484000-0xbdd2efff]
[ 0.648796] PM: hibernation: Registered nosave memory: [mem 0xbdd2f000-0xbddccfff]
[ 0.648797] PM: hibernation: Registered nosave memory: [mem 0xbddcd000-0xbdea0fff]
[ 0.648798] PM: hibernation: Registered nosave memory: [mem 0xbdea1000-0xbdf2efff]
[ 0.648799] PM: hibernation: Registered nosave memory: [mem 0xbdf2f000-0xbdfa9fff]
[ 0.648801] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xcfffffff]
[ 0.648802] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[ 0.648803] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.648804] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed18fff]
[ 0.648805] PM: hibernation: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[ 0.648806] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.648807] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.648808] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.648809] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.648810] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffa1ffff]
[ 0.648811] PM: hibernation: Registered nosave memory: [mem 0xffa20000-0xffffffff]
[ 0.648814] [mem 0xd0000000-0xfebfffff] available for PCI devices
[ 0.648826] Booting paravirtualized kernel on bare hardware
[ 0.648831] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.655871] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:152 nr_node_ids:2
[ 0.669675] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u262144
[ 0.669699] pcpu-alloc: s185240 r8192 d31848 u262144 alloc=1*2097152
[ 0.669700] pcpu-alloc: [0] 000 001 002 003 004 005 006 007
[ 0.669703] pcpu-alloc: [0] 016 017 018 019 020 021 022 023
[ 0.669706] pcpu-alloc: [0] 032 034 036 038 040 042 044 046
[ 0.669708] pcpu-alloc: [0] 048 050 052 054 056 058 060 062
[ 0.669710] pcpu-alloc: [0] 064 066 068 070 072 074 076 078
[ 0.669713] pcpu-alloc: [0] 080 082 084 086 088 090 092 094
[ 0.669715] pcpu-alloc: [0] 096 098 100 102 104 106 108 110
[ 0.669717] pcpu-alloc: [0] 112 114 116 118 120 122 124 126
[ 0.669720] pcpu-alloc: [0] 128 130 132 134 136 138 140 142
[ 0.669722] pcpu-alloc: [0] 144 146 148 150 --- --- --- ---
[ 0.669725] pcpu-alloc: [1] 008 009 010 011 012 013 014 015
[ 0.669727] pcpu-alloc: [1] 024 025 026 027 028 029 030 031
[ 0.669729] pcpu-alloc: [1] 033 035 037 039 041 043 045 047
[ 0.669732] pcpu-alloc: [1] 049 051 053 055 057 059 061 063
[ 0.669734] pcpu-alloc: [1] 065 067 069 071 073 075 077 079
[ 0.669737] pcpu-alloc: [1] 081 083 085 087 089 091 093 095
[ 0.669739] pcpu-alloc: [1] 097 099 101 103 105 107 109 111
[ 0.669741] pcpu-alloc: [1] 113 115 117 119 121 123 125 127
[ 0.669743] pcpu-alloc: [1] 129 131 133 135 137 139 141 143
[ 0.669746] pcpu-alloc: [1] 145 147 149 151 --- --- --- ---
[ 0.669834] Built 2 zonelists, mobility grouping on. Total pages: 49525377
[ 0.669835] Policy zone: Normal
[ 0.669838] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.12 root=/dev/mapper/fili0-rootfs ro console=ttyS0,115200n1 console=tty0 mpt3sas.logging_level=0x3f8 mpt3sas.max_queue_depth=10000
[ 0.670010] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.670011] printk: log_buf_len total cpu_extra contributions: 618496 bytes
[ 0.670012] printk: log_buf_len min size: 262144 bytes
[ 0.670264] printk: log_buf_len: 1048576 bytes
[ 0.670265] printk: early log buf free: 245552(93%)
[ 0.673466] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 1.512001] Memory: 197824172K/201246092K available (14339K kernel code, 1690K rwdata, 4572K rodata, 1760K init, 2644K bss, 3421920K reserved, 0K cma-reserved)
[ 1.512788] random: get_random_u64 called from cache_random_seq_create+0x80/0x160 with crng_init=0
[ 1.513193] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=152, Nodes=2
[ 1.513278] Kernel/User page tables isolation: enabled
[ 1.513484] ftrace: allocating 43375 entries in 170 pages
[ 1.535526] ftrace: allocated 170 pages with 4 groups
[ 1.536786] rcu: Hierarchical RCU implementation.
[ 1.536788] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=152.
[ 1.536790] Trampoline variant of Tasks RCU enabled.
[ 1.536791] Rude variant of Tasks RCU enabled.
[ 1.536792] Tracing variant of Tasks RCU enabled.
[ 1.536793] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 1.536795] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=152
[ 1.541598] NR_IRQS: 33024, nr_irqs: 2456, preallocated irqs: 16
[ 1.542379] Console: colour dummy device 80x25
[ 1.542717] printk: console [tty0] enabled
[ 2.945079] printk: console [ttyS0] enabled
[ 2.950010] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 2.962547] ACPI: Core revision 20200528
[ 2.968030] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 2.978262] APIC: Switch to symmetric I/O mode setup
[ 2.983833] DMAR: Host address width 46
[ 2.988136] DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
[ 2.994097] DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020ff
[ 3.002943] DMAR: DRHD base: 0x000000ebffc000 flags: 0x1
[ 3.008885] DMAR: dmar1: reg_base_addr ebffc000 ver 1:0 cap d2078c106f0462 ecap f020ff
[ 3.017741] DMAR: RMRR base: 0x000000bdd05000 end: 0x000000bdd29fff
[ 3.024756] DMAR: ATSR flags: 0x0
[ 3.028474] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffe000 IOMMU 0
[ 3.035583] DMAR-IR: IOAPIC id 0 under DRHD base 0xebffc000 IOMMU 1
[ 3.042683] DMAR-IR: IOAPIC id 1 under DRHD base 0xebffc000 IOMMU 1
[ 3.049793] DMAR-IR: HPET id 0 under DRHD base 0xebffc000
[ 3.055850] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 3.066107] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 3.072158] x2apic enabled
[ 3.075203] Switched APIC routing to cluster x2apic.
[ 3.081470] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 3.106322] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa25c6d1dd, max_idle_ns: 440795281504 ns
[ 3.118099] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.24 BogoMIPS (lpj=8778496)
[ 3.122098] pid_max: default: 155648 minimum: 1216
[ 3.137291] LSM: Security Framework initializing
[ 3.165065] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes, vmalloc)
[ 3.179641] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
[ 3.182621] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[ 3.190385] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[ 3.195314] mce: CPU0: Thermal monitoring enabled (TM1)
[ 3.198146] process: using mwait in idle threads
[ 3.202112] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 3.206110] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 3.210118] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 3.214113] Spectre V2 : Mitigation: Full generic retpoline
[ 3.218110] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 3.222110] Speculative Store Bypass: Vulnerable
[ 3.226115] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 3.230340] Freeing SMP alternatives memory: 40K
[ 3.242361] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz (family: 0x6, model: 0x2d, stepping: 0x7)
[ 3.246450] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 3.250116] ... version: 3
[ 3.254110] ... bit width: 48
[ 3.258110] ... generic registers: 4
[ 3.262110] ... value mask: 0000ffffffffffff
[ 3.266110] ... max period: 00007fffffffffff
[ 3.270109] ... fixed-purpose events: 3
[ 3.274109] ... event mask: 000000070000000f
[ 3.278268] rcu: Hierarchical SRCU implementation.
[ 3.296127] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 3.300766] smp: Bringing up secondary CPUs ...
[ 3.302292] x86: Booting SMP configuration:
[ 3.306101] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 3.334114] .... node #1, CPUs: #8
[ 1.496022] smpboot: CPU 8 Converting physical 0 to logical die 1
[ 3.430320] #9 #10 #11 #12 #13 #14 #15
[ 3.462100] .... node #0, CPUs: #16
[ 3.465451] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 3.470364] #17 #18 #19 #20 #21 #22 #23
[ 3.494102] .... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
[ 3.526179] smp: Brought up 2 nodes, 32 CPUs
[ 3.534102] smpboot: Max logical packages: 10
[ 3.538101] smpboot: Total of 32 processors activated (140766.36 BogoMIPS)
[ 3.557087] devtmpfs: initialized
[ 3.558191] x86/mm: Memory block size: 1024MB
[ 3.564713] PM: Registering ACPI NVS region [mem 0xbdd2f000-0xbddccfff] (647168 bytes)
[ 3.566136] PM: Registering ACPI NVS region [mem 0xbdea1000-0xbdf2efff] (581632 bytes)
[ 3.570360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 3.574306] futex hash table entries: 65536 (order: 10, 4194304 bytes, vmalloc)
[ 3.579308] pinctrl core: initialized pinctrl subsystem
[ 3.582316] PM: RTC time: 18:38:13, date: 2020-09-30
[ 3.586115] thermal_sys: Registered thermal governor 'fair_share'
[ 3.586116] thermal_sys: Registered thermal governor 'bang_bang'
[ 3.590098] thermal_sys: Registered thermal governor 'step_wise'
[ 3.594098] thermal_sys: Registered thermal governor 'user_space'
[ 3.598541] NET: Registered protocol family 16
[ 3.606292] audit: initializing netlink subsys (disabled)
[ 3.610125] audit: type=2000 audit(1601491091.576:1): state=initialized audit_enabled=0 res=1
[ 3.618111] cpuidle: using governor ladder
[ 3.622113] cpuidle: using governor menu
[ 3.626241] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 3.630099] ACPI: bus type PCI registered
[ 3.634124] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.638351] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 3.642105] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 3.646125] PCI: Using configuration type 1 for base access
[ 3.650188] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 3.658740] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 3.662116] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 3.666445] ACPI: Added _OSI(Module Device)
[ 3.670102] ACPI: Added _OSI(Processor Device)
[ 3.674118] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.678098] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.682110] ACPI: Added _OSI(Linux-Dell-Video)
[ 3.686109] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 3.690109] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 3.823107] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 3.844258] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 3.860117] ACPI: Interpreter enabled
[ 3.862125] ACPI: (supports S0 S1 S3 S5)
[ 3.866099] ACPI: Using IOAPIC for interrupt routing
[ 3.870218] HEST: Table parsing has been initialized.
[ 3.874116] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.878914] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 3.912546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 3.914106] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 3.918417] acpi PNP0A08:00: _OSC: platform does not support [AER LTR]
[ 3.922345] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 3.926099] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 3.930256] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0xbfff]; [io 0x0000-0xbfff window] ignored
[ 3.934351] PCI host bridge to bus 0000:00
[ 3.938112] pci_bus 0000:00: root bus resource [io 0x0000-0xbfff]
[ 3.942099] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.946099] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 3.950099] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 3.954099] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 3.958098] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 3.962099] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 3.966099] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 3.970099] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 3.974112] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 3.978099] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 3.982098] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 3.986099] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 3.990099] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 3.994109] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 3.998099] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xebffffff window]
[ 4.002104] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x38007fffffff window]
[ 4.006099] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 4.010116] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
[ 4.014188] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 4.018228] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
[ 4.022197] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 4.026282] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
[ 4.030196] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 4.034254] pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
[ 4.038199] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 4.042266] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
[ 4.046144] pci 0000:00:03.0: enabling Extended Tags
[ 4.050154] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 4.054268] pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
[ 4.058195] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 4.062270] pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
[ 4.066119] pci 0000:00:04.0: reg 0x10: [mem 0x38007ff80000-0x38007ff83fff 64bit]
[ 4.070249] pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
[ 4.074115] pci 0000:00:04.1: reg 0x10: [mem 0x38007ff70000-0x38007ff73fff 64bit]
[ 4.078273] pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
[ 4.082115] pci 0000:00:04.2: reg 0x10: [mem 0x38007ff60000-0x38007ff63fff 64bit]
[ 4.086263] pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
[ 4.090115] pci 0000:00:04.3: reg 0x10: [mem 0x38007ff50000-0x38007ff53fff 64bit]
[ 4.094243] pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
[ 4.098116] pci 0000:00:04.4: reg 0x10: [mem 0x38007ff40000-0x38007ff43fff 64bit]
[ 4.102268] pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
[ 4.106115] pci 0000:00:04.5: reg 0x10: [mem 0x38007ff30000-0x38007ff33fff 64bit]
[ 4.110255] pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
[ 4.114130] pci 0000:00:04.6: reg 0x10: [mem 0x38007ff20000-0x38007ff23fff 64bit]
[ 4.118248] pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
[ 4.122127] pci 0000:00:04.7: reg 0x10: [mem 0x38007ff10000-0x38007ff13fff 64bit]
[ 4.126262] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
[ 4.130260] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
[ 4.134252] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
[ 4.138125] pci 0000:00:05.4: reg 0x10: [mem 0xd1760000-0xd1760fff]
[ 4.142257] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
[ 4.146221] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 4.150247] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
[ 4.154121] pci 0000:00:16.0: reg 0x10: [mem 0xd1750000-0xd175000f 64bit]
[ 4.158165] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 4.162212] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
[ 4.166126] pci 0000:00:16.1: reg 0x10: [mem 0xd1740000-0xd174000f 64bit]
[ 4.170164] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 4.174232] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
[ 4.178121] pci 0000:00:1a.0: reg 0x10: [mem 0xd1720000-0xd17203ff]
[ 4.182186] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 4.186231] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
[ 4.190199] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 4.194264] pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
[ 4.198210] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 4.202264] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
[ 4.206121] pci 0000:00:1d.0: reg 0x10: [mem 0xd1710000-0xd17103ff]
[ 4.210187] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 4.214232] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 4.218265] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
[ 4.222326] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
[ 4.226117] pci 0000:00:1f.2: reg 0x10: [io 0x3070-0x3077]
[ 4.230105] pci 0000:00:1f.2: reg 0x14: [io 0x3060-0x3063]
[ 4.234117] pci 0000:00:1f.2: reg 0x18: [io 0x3050-0x3057]
[ 4.238116] pci 0000:00:1f.2: reg 0x1c: [io 0x3040-0x3043]
[ 4.242105] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
[ 4.246116] pci 0000:00:1f.2: reg 0x24: [mem 0xd1700000-0xd17007ff]
[ 4.250142] pci 0000:00:1f.2: PME# supported from D3hot
[ 4.254230] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
[ 4.258119] pci 0000:00:1f.3: reg 0x10: [mem 0x38007ff00000-0x38007ff000ff 64bit]
[ 4.262119] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 4.266352] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802
[ 4.270116] pci 0000:01:00.0: reg 0x10: [mem 0xd1600000-0xd1603fff 64bit]
[ 4.274200] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 4.278209] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 4.282115] pci 0000:00:01.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 4.286212] pci 0000:02:00.0: [1000:0064] type 00 class 0x010700
[ 4.290111] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 4.294106] pci 0000:02:00.0: reg 0x14: [mem 0xd1380000-0xd1383fff 64bit]
[ 4.298109] pci 0000:02:00.0: reg 0x1c: [mem 0xd1340000-0xd137ffff 64bit]
[ 4.302109] pci 0000:02:00.0: reg 0x30: [mem 0xd1100000-0xd117ffff pref]
[ 4.306103] pci 0000:02:00.0: enabling Extended Tags
[ 4.310138] pci 0000:02:00.0: supports D1 D2
[ 4.314121] pci 0000:02:00.0: reg 0x174: [mem 0xd1390000-0xd1393fff 64bit]
[ 4.318099] pci 0000:02:00.0: VF(n) BAR0 space: [mem 0xd1390000-0xd13abfff 64bit] (contains BAR0 for 7 VFs)
[ 4.322104] pci 0000:02:00.0: reg 0x17c: [mem 0xd1180000-0xd11bffff 64bit]
[ 4.326110] pci 0000:02:00.0: VF(n) BAR2 space: [mem 0xd1180000-0xd133ffff 64bit] (contains BAR2 for 7 VFs)
[ 4.330210] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 4.334101] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
[ 4.338102] pci 0000:00:02.0: bridge window [mem 0xd1100000-0xd13fffff]
[ 4.342210] pci 0000:00:02.2: PCI bridge to [bus 03]
[ 4.346253] pci 0000:04:00.0: [1912:0014] type 00 class 0x0c0330
[ 4.350130] pci 0000:04:00.0: reg 0x10: [mem 0xd1500000-0xd1501fff 64bit]
[ 4.354222] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 4.358260] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 4.362103] pci 0000:00:03.0: bridge window [mem 0xd1500000-0xd15fffff]
[ 4.366216] pci 0000:00:03.2: PCI bridge to [bus 05]
[ 4.370168] pci 0000:00:11.0: PCI bridge to [bus 06]
[ 4.374186] pci 0000:07:00.0: [8086:1521] type 00 class 0x020000
[ 4.378138] pci 0000:07:00.0: reg 0x10: [mem 0xd1420000-0xd143ffff]
[ 4.382123] pci 0000:07:00.0: reg 0x18: [io 0x1020-0x103f]
[ 4.386113] pci 0000:07:00.0: reg 0x1c: [mem 0xd1450000-0xd1453fff]
[ 4.390260] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 4.394142] pci 0000:07:00.0: reg 0x184: [mem 0xd14c0000-0xd14c3fff]
[ 4.398099] pci 0000:07:00.0: VF(n) BAR0 space: [mem 0xd14c0000-0xd14dffff] (contains BAR0 for 8 VFs)
[ 4.402132] pci 0000:07:00.0: reg 0x190: [mem 0xd14a0000-0xd14a3fff]
[ 4.406099] pci 0000:07:00.0: VF(n) BAR3 space: [mem 0xd14a0000-0xd14bffff] (contains BAR3 for 8 VFs)
[ 4.410307] pci 0000:07:00.1: [8086:1521] type 00 class 0x020000
[ 4.414137] pci 0000:07:00.1: reg 0x10: [mem 0xd1400000-0xd141ffff]
[ 4.418123] pci 0000:07:00.1: reg 0x18: [io 0x1000-0x101f]
[ 4.422111] pci 0000:07:00.1: reg 0x1c: [mem 0xd1440000-0xd1443fff]
[ 4.426261] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
[ 4.430142] pci 0000:07:00.1: reg 0x184: [mem 0xd1480000-0xd1483fff]
[ 4.434099] pci 0000:07:00.1: VF(n) BAR0 space: [mem 0xd1480000-0xd149ffff] (contains BAR0 for 8 VFs)
[ 4.438132] pci 0000:07:00.1: reg 0x190: [mem 0xd1460000-0xd1463fff]
[ 4.442099] pci 0000:07:00.1: VF(n) BAR3 space: [mem 0xd1460000-0xd147ffff] (contains BAR3 for 8 VFs)
[ 4.446319] pci 0000:00:1c.0: PCI bridge to [bus 07-08]
[ 4.450101] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 4.454101] pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd14fffff]
[ 4.458181] pci 0000:09:00.0: [102b:0522] type 00 class 0x030000
[ 4.462137] pci 0000:09:00.0: reg 0x10: [mem 0xea000000-0xeaffffff pref]
[ 4.466114] pci 0000:09:00.0: reg 0x14: [mem 0xd1010000-0xd1013fff]
[ 4.470114] pci 0000:09:00.0: reg 0x18: [mem 0xd0800000-0xd0ffffff]
[ 4.474162] pci 0000:09:00.0: reg 0x30: [mem 0xd1000000-0xd100ffff pref]
[ 4.478130] pci 0000:09:00.0: BAR 0: assigned to efifb
[ 4.482295] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 4.486104] pci 0000:00:1c.7: bridge window [mem 0xd0800000-0xd10fffff]
[ 4.490103] pci 0000:00:1c.7: bridge window [mem 0xea000000-0xeaffffff 64bit pref]
[ 4.494135] pci_bus 0000:0a: extended config space not accessible
[ 4.498179] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 4.502108] pci 0000:00:1e.0: bridge window [io 0x0000-0xbfff] (subtractive decode)
[ 4.506099] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 4.510099] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 4.514100] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 4.518099] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 4.522099] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 4.526099] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 4.530099] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 4.534110] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 4.538099] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 4.542110] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 4.546099] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 4.550099] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 4.554110] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 4.558099] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 4.562110] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xebffffff window] (subtractive decode)
[ 4.566099] pci 0000:00:1e.0: bridge window [mem 0x380000000000-0x38007fffffff window] (subtractive decode)
[ 4.570152] pci_bus 0000:00: on NUMA node 0
[ 4.570886] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.574160] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.578150] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 4.582149] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.586149] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 4.590166] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.594147] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.598147] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.602258] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
[ 4.606102] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 4.610248] acpi PNP0A08:01: _OSC: platform does not support [AER LTR]
[ 4.614238] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 4.618099] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
[ 4.622350] PCI host bridge to bus 0000:80
[ 4.626100] pci_bus 0000:80: root bus resource [io 0x03b0-0x03df window]
[ 4.630099] pci_bus 0000:80: root bus resource [io 0xc000-0xffff window]
[ 4.634099] pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff window]
[ 4.638100] pci_bus 0000:80: root bus resource [mem 0xec000000-0xfbffffff window]
[ 4.642100] pci_bus 0000:80: root bus resource [mem 0x380080000000-0x3800ffffffff window]
[ 4.646099] pci_bus 0000:80: root bus resource [bus 80-fe]
[ 4.650114] pci 0000:80:02.0: [8086:3c04] type 01 class 0x060400
[ 4.654208] pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
[ 4.658280] pci 0000:80:04.0: [8086:3c20] type 00 class 0x088000
[ 4.662118] pci 0000:80:04.0: reg 0x10: [mem 0x3800ddf70000-0x3800ddf73fff 64bit]
[ 4.666243] pci 0000:80:04.1: [8086:3c21] type 00 class 0x088000
[ 4.670117] pci 0000:80:04.1: reg 0x10: [mem 0x3800ddf60000-0x3800ddf63fff 64bit]
[ 4.674259] pci 0000:80:04.2: [8086:3c22] type 00 class 0x088000
[ 4.678117] pci 0000:80:04.2: reg 0x10: [mem 0x3800ddf50000-0x3800ddf53fff 64bit]
[ 4.682236] pci 0000:80:04.3: [8086:3c23] type 00 class 0x088000
[ 4.686117] pci 0000:80:04.3: reg 0x10: [mem 0x3800ddf40000-0x3800ddf43fff 64bit]
[ 4.690229] pci 0000:80:04.4: [8086:3c24] type 00 class 0x088000
[ 4.694116] pci 0000:80:04.4: reg 0x10: [mem 0x3800ddf30000-0x3800ddf33fff 64bit]
[ 4.698251] pci 0000:80:04.5: [8086:3c25] type 00 class 0x088000
[ 4.702117] pci 0000:80:04.5: reg 0x10: [mem 0x3800ddf20000-0x3800ddf23fff 64bit]
[ 4.706249] pci 0000:80:04.6: [8086:3c26] type 00 class 0x088000
[ 4.710117] pci 0000:80:04.6: reg 0x10: [mem 0x3800ddf10000-0x3800ddf13fff 64bit]
[ 4.714227] pci 0000:80:04.7: [8086:3c27] type 00 class 0x088000
[ 4.718117] pci 0000:80:04.7: reg 0x10: [mem 0x3800ddf00000-0x3800ddf03fff 64bit]
[ 4.722245] pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000
[ 4.726247] pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000
[ 4.730247] pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020
[ 4.734114] pci 0000:80:05.4: reg 0x10: [mem 0xec200000-0xec200fff]
[ 4.738594] pci 0000:81:00.0: [15b3:1003] type 00 class 0x020000
[ 4.742565] pci 0000:81:00.0: reg 0x10: [mem 0xec100000-0xec1fffff 64bit]
[ 4.746312] pci 0000:81:00.0: reg 0x18: [mem 0x3800fe000000-0x3800ffffffff 64bit pref]
[ 4.750496] pci 0000:81:00.0: reg 0x30: [mem 0xec000000-0xec0fffff pref]
[ 4.755957] pci 0000:81:00.0: reg 0x134: [mem 0x3800de000000-0x3800dfffffff 64bit pref]
[ 4.758099] pci 0000:81:00.0: VF(n) BAR2 space: [mem 0x3800de000000-0x3800fdffffff 64bit pref] (contains BAR2 for 16 VFs)
[ 4.764176] pci 0000:80:02.0: PCI bridge to [bus 81]
[ 4.766103] pci 0000:80:02.0: bridge window [mem 0xec000000-0xec1fffff]
[ 4.770116] pci 0000:80:02.0: bridge window [mem 0x3800de000000-0x3800ffffffff 64bit pref]
[ 4.774107] pci_bus 0000:80: on NUMA node 1
[ 4.780016] ACPI: PCI Root Bridge [UCR0] (domain 0000 [bus 7f])
[ 4.782102] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 4.786131] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME AER]
[ 4.790126] acpi PNP0A03:00: _OSC: OS now controls [PCIeCapability LTR]
[ 4.794099] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 4.798173] PCI host bridge to bus 0000:7f
[ 4.802100] pci_bus 0000:7f: Unknown NUMA node; performance will be reduced
[ 4.806099] pci_bus 0000:7f: root bus resource [bus 7f]
[ 4.810120] pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
[ 4.814172] pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
[ 4.818169] pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
[ 4.822167] pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
[ 4.826164] pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
[ 4.830166] pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
[ 4.834162] pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
[ 4.838165] pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
[ 4.842158] pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
[ 4.846153] pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
[ 4.850163] pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
[ 4.854158] pci 0000:7f:0c.3: [8086:3ce8] type 00 class 0x088000
[ 4.858265] pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
[ 4.862161] pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
[ 4.866171] pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
[ 4.870155] pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
[ 4.874158] pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
[ 4.878167] pci 0000:7f:0d.3: [8086:3ce8] type 00 class 0x088000
[ 4.882147] pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
[ 4.886167] pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
[ 4.890162] pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
[ 4.894181] pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
[ 4.898188] pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
[ 4.902184] pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
[ 4.906203] pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
[ 4.910180] pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
[ 4.914184] pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
[ 4.918196] pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
[ 4.922169] pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
[ 4.926198] pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
[ 4.930208] pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
[ 4.934187] pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
[ 4.938196] pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
[ 4.942197] pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
[ 4.946185] pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
[ 4.950188] pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
[ 4.954194] pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
[ 4.958175] pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
[ 4.962169] pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
[ 4.966155] pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
[ 4.970166] pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
[ 4.974159] pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
[ 4.978249] ACPI: PCI Root Bridge [UCR1] (domain 0000 [bus ff])
[ 4.982102] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 4.986131] acpi PNP0A03:01: _OSC: platform does not support [PCIeHotplug PME AER]
[ 4.990126] acpi PNP0A03:01: _OSC: OS now controls [PCIeCapability LTR]
[ 4.994099] acpi PNP0A03:01: FADT indicates ASPM is unsupported, using BIOS configuration
[ 4.998172] PCI host bridge to bus 0000:ff
[ 5.002099] pci_bus 0000:ff: Unknown NUMA node; performance will be reduced
[ 5.006099] pci_bus 0000:ff: root bus resource [bus ff]
[ 5.010110] pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
[ 5.014172] pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
[ 5.018180] pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
[ 5.022163] pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
[ 5.026171] pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
[ 5.030174] pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
[ 5.034166] pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
[ 5.038163] pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
[ 5.042163] pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
[ 5.046171] pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
[ 5.050157] pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
[ 5.054166] pci 0000:ff:0c.3: [8086:3ce8] type 00 class 0x088000
[ 5.058176] pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
[ 5.062164] pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
[ 5.066173] pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
[ 5.070163] pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
[ 5.074175] pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
[ 5.078172] pci 0000:ff:0d.3: [8086:3ce8] type 00 class 0x088000
[ 5.082164] pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
[ 5.086163] pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
[ 5.090159] pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
[ 5.094185] pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
[ 5.098205] pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
[ 5.102201] pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
[ 5.106202] pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
[ 5.110195] pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
[ 5.114200] pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
[ 5.118199] pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
[ 5.122177] pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
[ 5.126203] pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
[ 5.130191] pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
[ 5.134194] pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
[ 5.138209] pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
[ 5.142211] pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
[ 5.146195] pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
[ 5.150205] pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
[ 5.154194] pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
[ 5.158206] pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
[ 5.162178] pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
[ 5.166167] pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
[ 5.170168] pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
[ 5.174165] pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
[ 5.178767] iommu: Default domain type: Translated
[ 5.182166] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[ 5.186096] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 5.186130] pci 0000:09:00.0: vgaarb: bridge control possible
[ 5.190112] vgaarb: loaded
[ 5.193609] SCSI subsystem initialized
[ 5.194219] libata version 3.00 loaded.
[ 5.194219] ACPI: bus type USB registered
[ 5.198129] usbcore: registered new interface driver usbfs
[ 5.202118] usbcore: registered new interface driver hub
[ 5.206259] usbcore: registered new device driver usb
[ 5.210321] EDAC MC: Ver: 3.0.0
[ 5.214317] Registered efivars operations
[ 5.218440] NetLabel: Initializing
[ 5.222113] NetLabel: domain hash size = 128
[ 5.226098] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 5.230126] NetLabel: unlabeled traffic allowed by default
[ 5.234146] PCI: Using ACPI for IRQ routing
[ 5.243023] PCI: pci_cache_line_size set to 64 bytes
[ 5.243268] e820: reserve RAM buffer [mem 0xbad34000-0xbbffffff]
[ 5.243270] e820: reserve RAM buffer [mem 0xbafb7000-0xbbffffff]
[ 5.243271] e820: reserve RAM buffer [mem 0xbb3d4000-0xbbffffff]
[ 5.243272] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[ 5.243277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 5.246100] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 5.252249] clocksource: Switched to clocksource tsc-early
[ 5.278681] VFS: Disk quotas dquot_6.6.0
[ 5.283208] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.291098] pnp: PnP ACPI init
[ 5.294802] system 00:00: [io 0x0680-0x069f] has been reserved
[ 5.301427] system 00:00: [io 0xffff] has been reserved
[ 5.307368] system 00:00: [io 0xffff] has been reserved
[ 5.313300] system 00:00: [io 0xffff] has been reserved
[ 5.319250] system 00:00: [io 0x0400-0x0453] has been reserved
[ 5.325871] system 00:00: [io 0x0458-0x047f] has been reserved
[ 5.332491] system 00:00: [io 0x0500-0x057f] has been reserved
[ 5.339114] system 00:00: [io 0x0600-0x061f] has been reserved
[ 5.345736] system 00:00: [io 0x0ca2-0x0ca5] could not be reserved
[ 5.352735] system 00:00: [io 0x0cf9] could not be reserved
[ 5.359071] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.359111] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 5.359240] system 00:02: [io 0x0454-0x0457] has been reserved
[ 5.365857] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 5.366128] pnp 00:03: [dma 0 disabled]
[ 5.366197] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 5.366360] pnp 00:04: [dma 0 disabled]
[ 5.366425] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 5.366810] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 5.374204] system 00:05: [mem 0xebfff000-0xebffffff] has been reserved
[ 5.381591] system 00:05: [mem 0xc0000000-0xcfffffff] has been reserved
[ 5.388998] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 5.396395] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 5.403793] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 5.411580] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 5.419365] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 5.427149] system 00:05: [mem 0xd0000000-0xd0000fff] has been reserved
[ 5.434548] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.434705] system 00:06: [mem 0xebffc000-0xebffdfff] could not be reserved
[ 5.442486] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.442850] system 00:07: [mem 0xfbffe000-0xfbffffff] could not be reserved
[ 5.450632] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.450752] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
[ 5.458534] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 5.458924] pnp: PnP ACPI: found 9 devices
[ 5.470055] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 5.480183] NET: Registered protocol family 2
[ 5.485732] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ 5.496047] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
[ 5.506204] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ 5.514750] TCP: Hash tables configured (established 524288 bind 65536)
[ 5.522580] UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ 5.530903] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ 5.540421] NET: Registered protocol family 1
[ 5.545348] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 5.550914] pci 0000:00:01.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 5.558501] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 5.564051] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
[ 5.570858] pci 0000:00:02.0: bridge window [mem 0xd1100000-0xd13fffff]
[ 5.578464] pci 0000:00:02.2: PCI bridge to [bus 03]
[ 5.584027] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 5.589584] pci 0000:00:03.0: bridge window [mem 0xd1500000-0xd15fffff]
[ 5.597181] pci 0000:00:03.2: PCI bridge to [bus 05]
[ 5.602723] pci 0000:00:11.0: PCI bridge to [bus 06]
[ 5.608280] pci 0000:00:1c.0: PCI bridge to [bus 07-08]
[ 5.614125] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 5.620942] pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd14fffff]
[ 5.628540] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 5.634100] pci 0000:00:1c.7: bridge window [mem 0xd0800000-0xd10fffff]
[ 5.641683] pci 0000:00:1c.7: bridge window [mem 0xea000000-0xeaffffff 64bit pref]
[ 5.650346] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 5.655902] pci_bus 0000:00: resource 4 [io 0x0000-0xbfff]
[ 5.662134] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
[ 5.669823] pci_bus 0000:00: resource 6 [mem 0x000c0000-0x000c3fff window]
[ 5.677501] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c7fff window]
[ 5.685177] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 5.692864] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 5.700550] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 5.708333] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 5.716118] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 5.723902] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 5.731688] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 5.739462] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 5.747235] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 5.755011] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 5.762797] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 5.770580] pci_bus 0000:00: resource 19 [mem 0xd0000000-0xebffffff window]
[ 5.778366] pci_bus 0000:00: resource 20 [mem 0x380000000000-0x38007fffffff window]
[ 5.786928] pci_bus 0000:01: resource 1 [mem 0xd1600000-0xd16fffff]
[ 5.793938] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 5.800173] pci_bus 0000:02: resource 1 [mem 0xd1100000-0xd13fffff]
[ 5.807183] pci_bus 0000:04: resource 1 [mem 0xd1500000-0xd15fffff]
[ 5.814182] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 5.820413] pci_bus 0000:07: resource 1 [mem 0xd1400000-0xd14fffff]
[ 5.827410] pci_bus 0000:09: resource 1 [mem 0xd0800000-0xd10fffff]
[ 5.834410] pci_bus 0000:09: resource 2 [mem 0xea000000-0xeaffffff 64bit pref]
[ 5.842488] pci_bus 0000:0a: resource 4 [io 0x0000-0xbfff]
[ 5.848721] pci_bus 0000:0a: resource 5 [mem 0x000a0000-0x000bffff window]
[ 5.856397] pci_bus 0000:0a: resource 6 [mem 0x000c0000-0x000c3fff window]
[ 5.864084] pci_bus 0000:0a: resource 7 [mem 0x000c4000-0x000c7fff window]
[ 5.871772] pci_bus 0000:0a: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 5.879462] pci_bus 0000:0a: resource 9 [mem 0x000cc000-0x000cffff window]
[ 5.887137] pci_bus 0000:0a: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 5.894910] pci_bus 0000:0a: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 5.902675] pci_bus 0000:0a: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 5.910449] pci_bus 0000:0a: resource 13 [mem 0x000dc000-0x000dffff window]
[ 5.918223] pci_bus 0000:0a: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 5.926008] pci_bus 0000:0a: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 5.933783] pci_bus 0000:0a: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 5.941569] pci_bus 0000:0a: resource 17 [mem 0x000ec000-0x000effff window]
[ 5.949342] pci_bus 0000:0a: resource 18 [mem 0x000f0000-0x000fffff window]
[ 5.957128] pci_bus 0000:0a: resource 19 [mem 0xd0000000-0xebffffff window]
[ 5.964900] pci_bus 0000:0a: resource 20 [mem 0x380000000000-0x38007fffffff window]
[ 5.973589] pci 0000:80:02.0: PCI bridge to [bus 81]
[ 5.979149] pci 0000:80:02.0: bridge window [mem 0xec000000-0xec1fffff]
[ 5.986742] pci 0000:80:02.0: bridge window [mem 0x3800de000000-0x3800ffffffff 64bit pref]
[ 5.996196] pci_bus 0000:80: resource 4 [io 0x03b0-0x03df window]
[ 6.003096] pci_bus 0000:80: resource 5 [io 0xc000-0xffff window]
[ 6.010006] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff window]
[ 6.017682] pci_bus 0000:80: resource 7 [mem 0xec000000-0xfbffffff window]
[ 6.025359] pci_bus 0000:80: resource 8 [mem 0x380080000000-0x3800ffffffff window]
[ 6.033834] pci_bus 0000:81: resource 1 [mem 0xec000000-0xec1fffff]
[ 6.040844] pci_bus 0000:81: resource 2 [mem 0x3800de000000-0x3800ffffffff 64bit pref]
[ 6.049782] pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28]
[ 6.058345] pci 0000:04:00.0: enabling device (0140 -> 0142)
[ 6.064815] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 6.074184] pci 0000:80:05.0: disabled boot interrupts on device [8086:3c28]
[ 6.082242] PCI: CLS 64 bytes, default 64
[ 6.086797] Trying to unpack rootfs image as initramfs...
[ 7.259724] Freeing initrd memory: 61560K
[ 7.282182] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 7.289390] software IO TLB: mapped [mem 0xb1f0e000-0xb5f0e000] (64MB)
[ 7.299931] check: Scanning for low memory corruption every 60 seconds
[ 7.310000] Initialise system trusted keyrings
[ 7.315098] workingset: timestamp_bits=40 max_order=26 bucket_order=0
[ 7.323977] zbud: loaded
[ 7.327533] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.334423] fuse: init (API version 7.31)
[ 7.339188] Allocating IMA blacklist keyring.
[ 7.356895] Key type asymmetric registered
[ 7.361485] Asymmetric key parser 'x509' registered
[ 7.366970] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 7.375408] io scheduler mq-deadline registered
[ 7.381345] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
[ 7.388220] pcieport 0000:00:02.0: PME: Signaling with IRQ 26
[ 7.394978] pcieport 0000:00:02.2: PME: Signaling with IRQ 27
[ 7.401661] pcieport 0000:00:03.0: PME: Signaling with IRQ 28
[ 7.408428] pcieport 0000:00:03.2: PME: Signaling with IRQ 29
[ 7.415155] pcieport 0000:00:11.0: PME: Signaling with IRQ 30
[ 7.421842] pcieport 0000:00:1c.0: PME: Signaling with IRQ 31
[ 7.428544] pcieport 0000:00:1c.7: PME: Signaling with IRQ 32
[ 7.435545] pcieport 0000:80:02.0: PME: Signaling with IRQ 34
[ 7.442515] efifb: probing for efifb
[ 7.446570] efifb: framebuffer at 0xea000000, using 1920k, total 1920k
[ 7.453858] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 7.460474] efifb: scrolling: redraw
[ 7.464482] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 7.484185] Console: switching to colour frame buffer device 100x37
[ 7.504503] fb0: EFI VGA frame buffer device
[ 7.509480] intel_idle: MWAIT substates: 0x21120
[ 7.509635] Monitor-Mwait will be used to enter C-1 state
[ 7.509651] Monitor-Mwait will be used to enter C-2 state
[ 7.509675] Monitor-Mwait will be used to enter C-2 state
[ 7.509681] ACPI: \_SB_.SCK0.CP00: Found 3 idle states
[ 7.515740] intel_idle: v0.5.1 model 0x2D
[ 7.519259] intel_idle: Local APIC timer is reliable in all C-states
[ 7.519870] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 7.529772] ACPI: Sleep Button [SLPB]
[ 7.534156] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.542793] ACPI: Power Button [PWRF]
[ 7.620402] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 7.629102] pstore: Registered erst as persistent store backend
[ 7.636321] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 7.645184] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 7.652788] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 7.663141] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 7.683102] Linux agpgart interface v0.103
[ 7.713186] brd: module loaded
[ 7.755547] loop: module loaded
[ 7.766569] nvme nvme0: pci function 0000:01:00.0
[ 7.778598] libphy: Fixed MDIO Bus: probed
[ 7.789355] tun: Universal TUN/TAP device driver, 1.6
[ 7.793352] nvme nvme0: 7/0/0 default/read/poll queues
[ 7.801408] PPP generic driver version 2.4.2
[ 7.824187] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.837739] ehci-pci: EHCI PCI platform driver
[ 7.849170] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 7.858829] nvme0n1: p1 p2 p3 p4 p5
[ 7.861287] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 7.886568] ehci-pci 0000:00:1a.0: debug port 2
[ 7.902252] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 7.916770] ehci-pci 0000:00:1a.0: irq 22, io mem 0xd1720000
[ 7.946178] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 7.959718] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 7.976357] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.991815] usb usb1: Product: EHCI Host Controller
[ 8.004596] usb usb1: Manufacturer: Linux 5.8.12 ehci_hcd
[ 8.017918] usb usb1: SerialNumber: 0000:00:1a.0
[ 8.030576] hub 1-0:1.0: USB hub found
[ 8.041979] hub 1-0:1.0: 2 ports detected
[ 8.053916] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 8.066847] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.082270] ehci-pci 0000:00:1d.0: debug port 2
[ 8.098176] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 8.112648] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd1710000
[ 8.138181] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 8.151216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 8.167153] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.181831] usb usb2: Product: EHCI Host Controller
[ 8.193781] usb usb2: Manufacturer: Linux 5.8.12 ehci_hcd
[ 8.206215] usb usb2: SerialNumber: 0000:00:1d.0
[ 8.217866] hub 2-0:1.0: USB hub found
[ 8.228396] hub 2-0:1.0: 2 ports detected
[ 8.239283] ehci-platform: EHCI generic platform driver
[ 8.251418] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.264743] ohci-pci: OHCI PCI platform driver
[ 8.276139] ohci-platform: OHCI generic platform driver
[ 8.288412] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.302144] i8042: PNP: No PS/2 controller found.
[ 8.310161] tsc: Refined TSC clocksource calibration: 2194.709 MHz
[ 8.314283] mousedev: PS/2 mouse device common for all mice
[ 8.327549] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa2ac90c0b, max_idle_ns: 440795216134 ns
[ 8.340940] rtc_cmos 00:01: RTC can wake from S4
[ 8.376760] clocksource: Switched to clocksource tsc
[ 8.378525] rtc_cmos 00:01: registered as rtc0
[ 8.398174] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 8.414782] rtc_cmos 00:01: setting system clock to 2020-09-30T18:38:19 UTC (1601491099)
[ 8.414841] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 8.446585] i2c /dev entries driver
[ 8.457525] device-mapper: uevent: version 1.0.3
[ 8.469825] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 8.486346] intel_pstate: Intel P-state driver initializing
[ 8.509685] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.523601] EFI Variables Facility v0.08 2004-May-17
[ 8.549455] NET: Registered protocol family 10
[ 8.562551] Segment Routing with IPv6
[ 8.573886] NET: Registered protocol family 17
[ 8.586178] Key type dns_resolver registered
[ 8.590851] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 8.614124] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 8.614738] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.645399] hub 1-1:1.0: USB hub found
[ 8.649389] microcode: sig=0x206d7, pf=0x1, revision=0x710
[ 8.657302] hub 1-1:1.0: 6 ports detected
[ 8.683703] microcode: Microcode Update Driver: v2.2.
[ 8.683712] IPI shorthand broadcast: enabled
[ 8.708957] sched_clock: Marking stable (7216897288, 1492022968)->(10158186224, -1449265968)
[ 8.726621] registered taskstats version 1
[ 8.738983] Loading compiled-in X.509 certificates
[ 8.752161] zswap: loaded using pool lzo/zbud
[ 8.765417] Key type ._fscrypt registered
[ 8.777576] Key type .fscrypt registered
[ 8.782930] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 8.789561] Key type fscrypt-provisioning registered
[ 8.819874] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.836042] hub 2-1:1.0: USB hub found
[ 8.848206] hub 2-1:1.0: 8 ports detected
[ 8.861522] pstore: Using crash dump compression: deflate
[ 8.876831] Key type encrypted registered
[ 8.888747] ima: No TPM chip found, activating TPM-bypass!
[ 8.902376] ima: Allocated hash algorithm: sha1
[ 8.914928] ima: No architecture policies found
[ 8.927398] evm: Initialising EVM extended attributes:
[ 8.940454] evm: security.selinux
[ 8.951312] evm: security.SMACK64
[ 8.961970] evm: security.SMACK64EXEC
[ 8.972930] evm: security.SMACK64TRANSMUTE
[ 8.984194] evm: security.SMACK64MMAP
[ 8.994728] evm: security.apparmor
[ 9.004799] evm: security.ima
[ 9.014229] evm: security.capability
[ 9.024258] evm: HMAC attrs: 0x1
[ 9.034584] PM: Magic number: 4:764:646
[ 9.047666] Freeing unused kernel image (initmem) memory: 1760K
[ 9.074266] Write protecting the kernel read-only data: 22528k
[ 9.088027] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 9.102343] Freeing unused kernel image (rodata/data gap) memory: 1572K
[ 9.158123] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 9.164221] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 9.184641] x86/mm: Checking user space page tables
[ 9.241228] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 9.254389] Run /init as init process
[ 9.264363] with arguments:
[ 9.264364] /init
[ 9.264365] with environment:
[ 9.264365] HOME=/
[ 9.264366] TERM=linux
[ 9.264366] BOOT_IMAGE=/boot/vmlinuz-5.8.12
[ 9.284704] usb 2-1.3: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
[ 9.284706] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.284707] usb 2-1.3: Product: Ultra Fit
[ 9.284708] usb 2-1.3: Manufacturer: SanDisk
[ 9.284709] usb 2-1.3: SerialNumber: 4C531001601201118042
[ 9.354792] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 9.366123] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[ 9.367872] scsi host0: usb-storage 2-1.3:1.0
[ 9.391122] usbcore: registered new interface driver usb-storage
[ 9.404865] usbcore: registered new interface driver uas
[ 9.470755] acpi PNP0C14:00: duplicate WMI GUID 0E7AF9F2-44A1-4C6F-A4B0-A7678480DA61 (first instance was on PNP0C14:00)
[ 9.490940] random: lvm: uninitialized urandom read (4 bytes read)
[ 9.494415] acpi PNP0C14:00: duplicate WMI GUID 0E7AF9F2-44A1-4C6F-A4B0-A7678480DA61 (first instance was on PNP0C14:00)
[ 9.529073] random: lvm: uninitialized urandom read (2 bytes read)
[ 9.544083] usb 2-1.4: New USB device found, idVendor=046b, idProduct=ff10, bcdDevice= 1.00
[ 9.561141] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.576169] usb 2-1.4: Product: Virtual Keyboard and Mouse
[ 9.589238] usb 2-1.4: Manufacturer: American Megatrends Inc.
[ 9.602705] usb 2-1.4: SerialNumber: serial
[ 9.655652] pps_core: LinuxPPS API ver. 1 registered
[ 9.655868] cryptd: max_cpu_qlen set to 1000
[ 9.655894] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 9.655900] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 9.661263] xhci_hcd 0000:04:00.0: hcc params 0x014051c7 hci version 0x100 quirks 0x0000001100000410
[ 9.661818] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 9.661820] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.661821] usb usb3: Product: xHCI Host Controller
[ 9.661822] usb usb3: Manufacturer: Linux 5.8.12 xhci-hcd
[ 9.661823] usb usb3: SerialNumber: 0000:04:00.0
[ 9.661925] hub 3-0:1.0: USB hub found
[ 9.661935] hub 3-0:1.0: 4 ports detected
[ 9.662188] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 9.662191] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 9.662194] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 9.664890] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.664906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 9.664908] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.664909] usb usb4: Product: xHCI Host Controller
[ 9.664910] usb usb4: Manufacturer: Linux 5.8.12 xhci-hcd
[ 9.664911] usb usb4: SerialNumber: 0000:04:00.0
[ 9.664984] hub 4-0:1.0: USB hub found
[ 9.664993] hub 4-0:1.0: 4 ports detected
[ 9.668389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.698120] usb 2-1.7: new full-speed USB device number 5 using ehci-pci
[ 9.924143] mlx4_core: Mellanox ConnectX core driver v4.0-0
[ 10.040932] mlx4_core: Initializing 0000:81:00.0
[ 10.051524] usb 2-1.7: New USB device found, idVendor=1546, idProduct=01a6, bcdDevice= 7.03
[ 10.070168] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.085675] usb 2-1.7: Product: u-blox 6 - GPS Receiver
[ 10.098914] usb 2-1.7: Manufacturer: u-blox AG - www.u-blox.com
[ 10.098968] PTP clock support registered
[ 10.126614] dca service started, version 1.12.1
[ 10.139393] ahci 0000:00:1f.2: version 3.0
[ 10.139459] AVX version of gcm_enc/dec engaged.
[ 10.140434] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 10.151596] AES CTR mode by8 optimization enabled
[ 10.180638] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 10.197477] setting logging_level(0x000003f8)
[ 10.210375] mpt3sas version 34.100.00.00 loaded
[ 10.223183] mpt3sas 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.238132] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
[ 10.239402] mpt2sas_cm0: mpt3sas_base_attach
[ 10.266040] mpt2sas_cm0: mpt3sas_base_map_resources
[ 10.279217] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (197972228 kB)
[ 10.295899] mpt2sas_cm0: _base_get_ioc_facts
[ 10.308042] mpt2sas_cm0: _base_wait_for_iocstate
[ 10.308194] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 10.321063] scsi host2: ahci
[ 10.335938] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 10.346973] scsi host3: ahci
[ 10.365440] usb 2-1.8: New USB device found, idVendor=051d, idProduct=0003, bcdDevice= 1.06
[ 10.373368] scsi host4: ahci
[ 10.388391] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.388393] usb 2-1.8: Product: Smart-UPS 2200 FW:UPS 06.3 / MCU 11.0
[ 10.388394] usb 2-1.8: Manufacturer: American Power Conversion
[ 10.388396] usb 2-1.8: SerialNumber: JS1051006712
[ 10.399419] scsi host5: ahci
[ 10.427644] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 10.443663] scsi host6: ahci
[ 10.445330] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.446063] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 10.448087] sd 0:0:0:0: [sda] Write Protect is off
[ 10.448088] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 10.449182] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.457960] scsi host7: ahci
[ 10.575776] hid: raw HID events driver (C) Jiri Kosina
[ 10.579599] ata1: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700100 irq 54
[ 10.605016] ata2: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700180 irq 54
[ 10.620837] ata3: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700200 irq 54
[ 10.636538] ata4: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700280 irq 54
[ 10.652130] ata5: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700300 irq 54
[ 10.667500] ata6: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700380 irq 54
[ 10.685826] igb 0000:07:00.0: added PHC on eth0
[ 10.697686] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 10.710678] sda: sda1 sda2 sda3
[ 10.712116] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:e9
[ 10.725825] random: fast init done
[ 10.737410] igb 0000:07:00.0: eth0: PBA No: 100000-000
[ 10.753089] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 10.760292] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 10.803388] usbcore: registered new interface driver usbhid
[ 10.806631] offset:data
[ 10.816471] usbhid: USB HID core driver
[ 10.826132] mpt2sas_cm0: [0x00]:03100200
[ 10.848319] mpt2sas_cm0: [0x04]:00002300
[ 10.859343] mpt2sas_cm0: [0x08]:00000000
[ 10.870230] mpt2sas_cm0: [0x0c]:00000000
[ 10.880877] mpt2sas_cm0: [0x10]:00000000
[ 10.891255] mpt2sas_cm0: [0x14]:00010080
[ 10.901431] mpt2sas_cm0: [0x18]:22137ec7
[ 10.911464] mpt2sas_cm0: [0x1c]:0001285c
[ 10.921369] mpt2sas_cm0: [0x20]:14000600
[ 10.921580] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046B:FF10.0001/input/input2
[ 10.931208] mpt2sas_cm0: [0x24]:00000020
[ 10.931209] mpt2sas_cm0: [0x28]:04000020
[ 10.931209] mpt2sas_cm0: [0x2c]:00810080
[ 10.931210] mpt2sas_cm0: [0x30]:007f0003
[ 10.931210] mpt2sas_cm0: [0x34]:0020ffe0
[ 10.931211] mpt2sas_cm0: [0x38]:008004b0
[ 10.931211] mpt2sas_cm0: [0x3c]:00000011
[ 10.931212] mpt2sas_cm0: [0x40]:00000000
[ 10.931213] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 10.931224] mpt2sas_cm0: CurrentHostPageSize(0)
[ 10.931225] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
[ 10.931226] mpt2sas_cm0: request frame size(128), reply frame size(128)
[ 10.931231] mpt2sas_cm0: msix is supported, vector_count(1)
[ 10.931231] mpt2sas_cm0: MSI-X vectors supported: 1
[ 10.931232] no of cores: 32, max_msix_vectors: -1
[ 10.931233] mpt2sas_cm0: 0 1
[ 10.938529] igb 0000:07:00.1: added PHC on eth1
[ 10.959293] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.4/input0
[ 10.969225] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 10.969226] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:ea
[ 10.969353] igb 0000:07:00.1: eth1: PBA No: 100000-000
[ 10.979440] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046B:FF10.0002/input/input3
[ 10.989055] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 10.989147] mpt2sas_cm0: High IOPs queues : disabled
[ 10.995470] ata2: SATA link down (SStatus 0 SControl 300)
[ 10.999007] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.4/input1
[ 11.000628] ata1: SATA link down (SStatus 0 SControl 300)
[ 11.003523] ata4: SATA link down (SStatus 0 SControl 300)
[ 11.003797] ata3: SATA link down (SStatus 0 SControl 300)
[ 11.003833] ata5: SATA link down (SStatus 0 SControl 300)
[ 11.003916] ata6: SATA link down (SStatus 0 SControl 300)
[ 11.008251] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 76
[ 11.008252] mpt2sas_cm0: iomem(0x00000000d1380000), mapped(0x(____ptrval____)), size(16384)
[ 11.008253] mpt2sas_cm0: ioport(0x0000000000002000), size(256)
[ 11.008294] mpt2sas_cm0: _base_get_ioc_facts
[ 11.018091] hid-generic 0003:051D:0003.0003: hiddev0,hidraw2: USB HID v1.00 Device [American Power Conversion Smart-UPS 2200 FW:UPS 06.3 / MCU 11.0] on usb-0000:00:1d.0-1.8/input0
[ 11.026576] mpt2sas_cm0: _base_wait_for_iocstate
[ 11.060076] igb 0000:07:00.1 unused: renamed from eth1
[ 11.081161] offset:data
[ 11.469121] mpt2sas_cm0: [0x00]:03100200
[ 11.480948] mpt2sas_cm0: [0x04]:00002300
[ 11.492618] mpt2sas_cm0: [0x08]:00000000
[ 11.504185] mpt2sas_cm0: [0x0c]:00000000
[ 11.515610] mpt2sas_cm0: [0x10]:00000000
[ 11.526912] mpt2sas_cm0: [0x14]:00010080
[ 11.538078] mpt2sas_cm0: [0x18]:22137ec7
[ 11.549178] mpt2sas_cm0: [0x1c]:0001285c
[ 11.560190] mpt2sas_cm0: [0x20]:14000600
[ 11.571121] mpt2sas_cm0: [0x24]:00000020
[ 11.581972] mpt2sas_cm0: [0x28]:04000020
[ 11.592546] mpt2sas_cm0: [0x2c]:00810080
[ 11.602821] mpt2sas_cm0: [0x30]:007f0003
[ 11.612870] mpt2sas_cm0: [0x34]:0020ffe0
[ 11.622804] mpt2sas_cm0: [0x38]:008004b0
[ 11.632599] mpt2sas_cm0: [0x3c]:00000011
[ 11.642144] mpt2sas_cm0: [0x40]:00000000
[ 11.651382] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 11.665160] mpt2sas_cm0: CurrentHostPageSize(0)
[ 11.674840] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
[ 11.686935] mpt2sas_cm0: request frame size(128), reply frame size(128)
[ 11.698897] mpt2sas_cm0: _base_make_ioc_ready
[ 11.708085] mpt2sas_cm0: _base_get_port_facts
[ 11.744892] offset:data
[ 11.751922] mpt2sas_cm0: [0x00]:05070000
[ 11.760749] mpt2sas_cm0: [0x04]:00000000
[ 11.769576] mpt2sas_cm0: [0x08]:00000000
[ 11.778414] mpt2sas_cm0: [0x0c]:00000000
[ 11.787102] mpt2sas_cm0: [0x10]:00000000
[ 11.795566] mpt2sas_cm0: [0x14]:00003000
[ 11.803870] mpt2sas_cm0: [0x18]:00000100
[ 11.812077] mpt2sas_cm0: _base_allocate_memory_pools
[ 11.821223] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15)
[ 11.840228] mpt2sas_cm0: scsi host: can_queue depth (9997)
[ 11.850255] mpt2sas_cm0: request pool(0x(____ptrval____)) - dma(0x17c8a00000): depth(10259), frame_size(128), pool_size(1282 kB)
[ 11.870886] mpt2sas_cm0: scsiio(0x(____ptrval____)): depth(10000)
[ 11.883497] mpt2sas_cm0: hi_priority(0x(____ptrval____)): depth(127), start smid(10001)
[ 11.896888] mpt2sas_cm0: internal(0x(____ptrval____)): depth(132), start smid(10128)
[ 12.007372] mpt2sas_cm0: chain pool depth(100000), frame_size(128), pool_size(12500 kB)
[ 12.021305] mpt2sas_cm0: sense pool(0x(____ptrval____))- dma(0x17c6c00000): depth(10000),element_size(96), pool_size(937 kB)
[ 12.044239] mpt2sas_cm0: reply pool(0x(____ptrval____)): depth(10323), frame_size(128), pool_size(1290 kB)
[ 12.066352] mpt2sas_cm0: reply_dma(0x17c6e00000)
[ 12.077463] mpt2sas_cm0: reply_free pool(0x(____ptrval____)): depth(10323), element_size(4), pool_size(40 kB)
[ 12.101173] mpt2sas_cm0: reply_free_dma (0x17c7380000)
[ 12.113523] mpt2sas_cm0: config page(0x(____ptrval____)) - dma(0x17c736f000): size(512)
[ 12.129375] mpt2sas_cm0: Allocated physical memory: size(7375 kB)
[ 12.143220] mpt2sas_cm0: Current Controller Queue Depth(9997),Max Controller Queue Depth(32455)
[ 12.160268] mpt2sas_cm0: Scatter Gather Elements per IO(128)
[ 12.174038] mpt2sas_cm0: _base_make_ioc_operational
[ 12.186854] mpt2sas_cm0: _base_send_ioc_init
[ 12.198855] mpt2sas_cm0: offset:data
[ 12.210052] mpt2sas_cm0: [0x00]:02000004
[ 12.221581] mpt2sas_cm0: [0x04]:00000000
[ 12.232950] mpt2sas_cm0: [0x08]:00000000
[ 12.244281] mpt2sas_cm0: [0x0c]:39000200
[ 12.255514] mpt2sas_cm0: [0x10]:00000000
[ 12.266678] mpt2sas_cm0: [0x14]:000c0002
[ 12.277851] mpt2sas_cm0: [0x18]:00200000
[ 12.289025] mpt2sas_cm0: [0x1c]:28535070
[ 12.300235] mpt2sas_cm0: [0x20]:00000017
[ 12.311456] mpt2sas_cm0: [0x24]:00000017
[ 12.322680] mpt2sas_cm0: [0x28]:c8a00000
[ 12.333911] mpt2sas_cm0: [0x2c]:00000017
[ 12.345067] mpt2sas_cm0: [0x30]:c8400000
[ 12.356019] mpt2sas_cm0: [0x34]:00000017
[ 12.366662] mpt2sas_cm0: [0x38]:c7380000
[ 12.377169] mpt2sas_cm0: [0x3c]:00000017
[ 12.387471] mpt2sas_cm0: [0x40]:e04eee42
[ 12.397497] mpt2sas_cm0: [0x44]:00000174
[ 12.451348] offset:data
[ 12.459357] mpt2sas_cm0: [0x00]:02050004
[ 12.468951] mpt2sas_cm0: [0x04]:00000000
[ 12.478361] mpt2sas_cm0: [0x08]:00000000
[ 12.487522] mpt2sas_cm0: [0x0c]:00000000
[ 12.496359] mpt2sas_cm0: [0x10]:00000000
[ 12.505381] mpt2sas_cm0: overriding NVDATA EEDPTagMode setting
[ 12.516556] mpt2sas_cm0: LSISAS2116: FWVersion(20.00.06.00), ChipRevision(0x02), BiosVersion(00.00.00.00)
[ 12.535336] mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 12.556920] mpt2sas_cm0: _base_event_notification
[ 12.566415] mpt2sas_cm0: _base_event_notification: complete
[ 12.576701] scsi host1: Fusion MPT SAS Host
[ 12.588842] mpt2sas_cm0: sending port enable !!
[ 14.205521] mpt2sas_cm0: Discovery: (start)
[ 14.214007] mpt2sas_cm0: SAS Enclosure Device Status Change
[ 14.214073] mpt2sas_cm0: discovery event: (start)
[ 14.224132] mpt2sas_cm0: SAS Topology Change List
[ 14.240152] mpt2sas_cm0: SAS Enclosure Device Status Change
[ 14.252785] mpt2sas_cm0: SAS Topology Change List
[ 14.262154] mpt2sas_cm0: SAS Topology Change List
[ 14.275888] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x500062b20038b300), phys(16)
[ 14.289577] mpt2sas_cm0: enclosure status change: (enclosure add)
handle(0x0001), enclosure logical id(0x500062b20038b300) number slots(0)
[ 14.314640] mpt2sas_cm0: sas topology change: (responding)
[ 14.325738] handle(0x0000), enclosure_handle(0x0001) start_phy(12), count(4)
[ 14.338915] phy(12), attached_handle(0x0011): link rate change: link rate: new(0x09), old(0x00)
[ 14.354281] phy(13), attached_handle(0x0011): link rate change: link rate: new(0x09), old(0x00)
[ 14.369624] phy(14), attached_handle(0x0011): link rate change: link rate: new(0x09), old(0x00)
[ 14.384955] phy(15), attached_handle(0x0011): link rate change: link rate: new(0x09), old(0x00)
[ 14.400288] mpt2sas_cm0: updating handles for sas_host(0x500062b20038b300)
[ 14.414918] mpt2sas_cm0: enclosure status change: (enclosure add)
handle(0x0002), enclosure logical id(0x5001940000d2c23f) number slots(0)
[ 14.442483] mpt2sas_cm0: sas topology change: (add)
[ 14.454110] handle(0x0011), enclosure_handle(0x0002) start_phy(00), count(22)
[ 14.456645] mpt2sas_cm0: Discovery: (stop)
[ 14.468630] phy(00), attached_handle(0x0012): target add: link rate: new(0x09), old(0x00)
[ 14.495634] phy(01), attached_handle(0x0013): target add: link rate: new(0x09), old(0x00)
[ 14.511611] phy(02), attached_handle(0x0014): target add: link rate: new(0x09), old(0x00)
[ 14.527620] phy(03), attached_handle(0x0015): target add: link rate: new(0x09), old(0x00)
[ 14.543630] phy(07), attached_handle(0x0016): target add: link rate: new(0x09), old(0x00)
[ 14.559627] phy(15), attached_handle(0x0017): target add: link rate: new(0x09), old(0x00)
[ 14.575505] phy(16), attached_handle(0x0001): link rate change: link rate: new(0x09), old(0x00)
[ 14.591920] phy(17), attached_handle(0x0001): link rate change: link rate: new(0x09), old(0x00)
[ 14.608028] phy(18), attached_handle(0x0001): link rate change: link rate: new(0x09), old(0x00)
[ 14.623816] phy(19), attached_handle(0x0001): link rate change: link rate: new(0x09), old(0x00)
[ 14.639296] mpt2sas_cm0: updating handles for sas_host(0x500062b20038b300)
[ 14.653493] mpt2sas_cm0: expander_add: handle(0x0011), parent(0x0001), sas_addr(0x5001940000d2c23f), phys(25)
[ 14.677208] expander-1:0: add: handle(0x0011), sas_addr(0x5001940000d2c23f)
[ 14.698496] mpt2sas_cm0: _scsih_sas_device_add: handle(0x0012), sas_addr(0x5001940000d2c200)
[ 14.714352] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 14.958255] scsi 1:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 6
[ 14.973988] scsi 1:0:0:0: SATA: handle(0x0012), sas_addr(0x5001940000d2c200), phy(0), device_name(0x0000000000000000)
[ 14.999529] scsi 1:0:0:0: enclosure logical id (0x5001940000d2c23f), slot(0)
[ 15.014964] scsi 1:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 15.031879] scsi 1:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
[ 15.055769] end_device-1:0:0: add: handle(0x0012), sas_addr(0x5001940000d2c200)
[ 15.072213] mpt2sas_cm0: _scsih_sas_device_add: handle(0x0013), sas_addr(0x5001940000d2c201)
[ 15.089179] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 15.205451] mpt2sas_cm0: Discovery: (start)
[ 15.217417] mpt2sas_cm0: SAS Topology Change List
[ 15.231364] scsi 1:0:1:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 6
[ 15.247881] scsi 1:0:1:0: SATA: handle(0x0013), sas_addr(0x5001940000d2c201), phy(1), device_name(0x0000000000000000)
[ 15.275241] scsi 1:0:1:0: enclosure logical id (0x5001940000d2c23f), slot(1)
[ 15.291433] scsi 1:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 15.308938] scsi 1:0:1:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
[ 15.333460] end_device-1:0:1: add: handle(0x0013), sas_addr(0x5001940000d2c201)
[ 15.350248] mpt2sas_cm0: _scsih_sas_device_add: handle(0x0014), sas_addr(0x5001940000d2c202)
[ 15.367812] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 15.456661] mpt2sas_cm0: Discovery: (stop)
[ 15.958214] scsi 1:0:2:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 6
[ 15.975485] scsi 1:0:2:0: SATA: handle(0x0014), sas_addr(0x5001940000d2c202), phy(2), device_name(0x0000000000000000)
[ 16.004321] scsi 1:0:2:0: enclosure logical id (0x5001940000d2c23f), slot(2)
[ 16.021507] scsi 1:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 16.040175] scsi 1:0:2:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
[ 16.065854] end_device-1:0:2: add: handle(0x0014), sas_addr(0x5001940000d2c202)
[ 16.084352] mpt2sas_cm0: _scsih_sas_device_add: handle(0x0015), sas_addr(0x5001940000d2c203)
[ 16.099610] mlx4_core 0000:81:00.0: DMFS high rate steer mode is: disabled performance optimized steering
[ 16.103559] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 16.134357] mlx4_core 0000:81:00.0: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
[ 16.207899] scsi 1:0:3:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 6
[ 16.227018] scsi 1:0:3:0: SATA: handle(0x0015), sas_addr(0x5001940000d2c203), phy(3), device_name(0x0000000000000000)
[ 16.258793] scsi 1:0:3:0: enclosure logical id (0x5001940000d2c23f), slot(3)
[ 16.277112] scsi 1:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 16.296666] scsi 1:0:3:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
[ 16.322164] end_device-1:0:3: add: handle(0x0015), sas_addr(0x5001940000d2c203)
[ 16.341178] mpt2sas_cm0: _scsih_sas_device_add: handle(0x0016), sas_addr(0x5001940000d2c207)
[ 16.360656] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 16.396356] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
[ 16.413404] mlx4_en 0000:81:00.0: Activating port:1
[ 16.432693] mlx4_en: 0000:81:00.0: Port 1: Using 32 TX rings
[ 16.448735] mlx4_en: 0000:81:00.0: Port 1: Using 16 RX rings
[ 16.458297] scsi 1:0:4:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 6
[ 16.464948] mlx4_en: 0000:81:00.0: Port 1: Initializing port
[ 16.483455] scsi 1:0:4:0: SATA: handle(0x0016), sas_addr(0x5001940000d2c207), phy(7), device_name(0x0000000000000000)
[ 16.483457] scsi 1:0:4:0: enclosure logical id (0x5001940000d2c23f), slot(7)
[ 16.500754] mlx4_en 0000:81:00.0: registered PHC clock
[ 16.531064] scsi 1:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 16.549112] mlx4_en 0000:81:00.0: Activating port:2
[ 16.550602] mlx4_core 0000:81:00.0 eth40b: renamed from eth1
[ 16.564113] scsi 1:0:4:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
[ 16.585012] mlx4_en: 0000:81:00.0: Port 2: Using 32 TX rings
[ 16.607460] end_device-1:0:4: add: handle(0x0016), sas_addr(0x5001940000d2c207)
[ 16.614675] mlx4_en: 0000:81:00.0: Port 2: Using 16 RX rings
[ 16.615005] mlx4_en: 0000:81:00.0: Port 2: Initializing port
[ 16.632779] mpt2sas_cm0: _scsih_sas_device_add: handle(0x0017), sas_addr(0x5001940000d2c20f)
[ 16.716906] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 16.750909] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0
[ 16.760861] mlx4_core 0000:81:00.0 eth40a: renamed from eth1
[ 16.771140] <mlx4_ib> mlx4_ib_add: counter index 2 for port 1 allocated 1
[ 16.802235] <mlx4_ib> mlx4_ib_add: counter index 3 for port 2 allocated 1
[ 16.956632] scsi 1:0:5:0: Direct-Access ATA WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 6
[ 16.974860] scsi 1:0:5:0: SATA: handle(0x0017), sas_addr(0x5001940000d2c20f), phy(15), device_name(0x0000000000000000)
[ 17.004962] scsi 1:0:5:0: enclosure logical id (0x5001940000d2c23f), slot(15)
[ 17.022473] scsi 1:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 17.041083] scsi 1:0:5:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
[ 17.061941] end_device-1:0:5: add: handle(0x0017), sas_addr(0x5001940000d2c20f)
[ 17.080703] mpt2sas_cm0: sas topology change: (responding)
[ 17.095804] handle(0x0011), enclosure_handle(0x0002) start_phy(22), count(3)
[ 17.112786] phy(24), attached_handle(0x0018): target add: link rate: new(0x09), old(0x00)
[ 17.131095] mpt2sas_cm0: updating handles for sas_host(0x500062b20038b300)
[ 17.149321] mpt2sas_cm0: _scsih_sas_device_add: handle(0x0018), sas_addr(0x5001940000d2c23e)
[ 17.167844] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(24)
[ 17.194523] scsi 1:0:6:0: Enclosure RACKABLE SE3016-SAS 0227 PQ: 0 ANSI: 5
[ 17.212772] scsi 1:0:6:0: set ignore_delay_remove for handle(0x0018)
[ 17.229070] scsi 1:0:6:0: SES: handle(0x0018), sas_addr(0x5001940000d2c23e), phy(24), device_name(0x0000000000000000)
[ 17.259779] scsi 1:0:6:0: enclosure logical id (0x5001940000d2c23f), slot(24)
[ 17.277403] scsi 1:0:6:0: qdepth(254), tagged(1), scsi_level(6), cmd_que(1)
[ 17.300313] scsi 1:0:6:0: tag#7346 CDB: Mode Sense(6) 1a 00 19 00 40 00
[ 17.317006] mpt2sas_cm0: sas_address(0x5001940000d2c23e), phy(24)
[ 17.333125] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(24)
[ 17.350092] mpt2sas_cm0: handle(0x0018), ioc_status(scsi data underrun)(0x0045), smid(7347)
[ 17.368719] mpt2sas_cm0: request_len(64), underflow(0), resid(64)
[ 17.384696] mpt2sas_cm0: tag(602), transfer_count(0), sc->result(0x00000002)
[ 17.401822] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 17.420896] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00], count(96)
[ 17.454041] end_device-1:0:6: add: handle(0x0018), sas_addr(0x5001940000d2c23e)
[ 17.454044] mpt2sas_cm0: discovery event: (stop)
[ 17.454045] mpt2sas_cm0: discovery event: (start)
[ 17.454046] mpt2sas_cm0: sas topology change: (responding)
[ 17.454047] handle(0x0000), enclosure_handle(0x0001) start_phy(00), count(12)
[ 17.454048] mpt2sas_cm0: updating handles for sas_host(0x500062b20038b300)
[ 17.455163] mpt2sas_cm0: discovery event: (stop)
[ 17.710109] raid6: sse2x4 gen() 12666 MB/s
[ 17.790111] raid6: sse2x4 xor() 6729 MB/s
[ 17.870109] raid6: sse2x2 gen() 9929 MB/s
[ 17.950104] raid6: sse2x2 xor() 7756 MB/s
[ 18.030106] raid6: sse2x1 gen() 10744 MB/s
[ 18.110111] raid6: sse2x1 xor() 6795 MB/s
[ 18.122974] raid6: using algorithm sse2x4 gen() 12666 MB/s
[ 18.137147] raid6: .... xor() 6729 MB/s, rmw enabled
[ 18.150633] raid6: using ssse3x2 recovery algorithm
[ 18.164699] xor: automatically using best checksumming function avx
[ 18.181211] async_tx: api initialized (async)
[ 18.231951] random: lvm: uninitialized urandom read (4 bytes read)
[ 18.310408] random: vgchange: uninitialized urandom read (4 bytes read)
[ 18.393023] process '/bin/fstype' started with executable stack
[ 18.446934] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 18.725108] mlx4_en: eth40b: Link Up
[ 18.828901] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 18.880022] mlx4_en: eth40a: Link Up
[ 18.895821] systemd[1]: Detected architecture x86-64.
[ 18.957015] systemd[1]: Set hostname to <fili>.
[ 19.069036] random: systemd: uninitialized urandom read (16 bytes read)
[ 19.086302] systemd[1]: Created slice System Slice.
[ 19.108186] systemd[1]: Listening on Journal Socket (/dev/log).
[ 19.131421] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 19.156558] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 19.180633] systemd[1]: Listening on udev Control Socket.
[ 19.203348] systemd[1]: Listening on Journal Socket.
[ 19.226836] systemd[1]: Mounting Huge Pages File System...
[ 19.307645] RPC: Registered named UNIX socket transport module.
[ 19.307646] RPC: Registered udp transport module.
[ 19.307647] RPC: Registered tcp transport module.
[ 19.307647] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.378955] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.435157] Loading iSCSI transport class v2.0-870.
[ 19.452034] iscsi: registered transport (tcp)
[ 19.474267] iscsi: registered transport (iser)
[ 19.581779] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 19.824608] systemd-journald[840]: Received request to flush runtime journal from PID 1
[ 20.077038] ioatdma: Intel(R) QuickData Technology Driver 5.00
[ 20.077388] ioatdma 0000:00:04.0: enabling device (0000 -> 0002)
[ 20.099861] igb 0000:07:00.0: DCA enabled
[ 20.100555] igb 0000:07:00.1: DCA enabled
[ 20.102225] ioatdma 0000:00:04.1: enabling device (0000 -> 0002)
[ 20.122537] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 20.122696] ioatdma 0000:00:04.2: enabling device (0000 -> 0002)
[ 20.143814] ioatdma 0000:00:04.3: enabling device (0000 -> 0002)
[ 20.166555] ioatdma 0000:00:04.4: enabling device (0000 -> 0002)
[ 20.188851] ioatdma 0000:00:04.5: enabling device (0000 -> 0002)
[ 20.200005] pstore: ignoring unexpected backend 'efi'
[ 20.202271] IPMI message handler: version 39.2
[ 20.203867] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 20.211145] ioatdma 0000:00:04.6: enabling device (0000 -> 0002)
[ 20.211628] ipmi device interface
[ 20.215532] ipmi_si: IPMI System Interface driver
[ 20.215724] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 20.215727] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 20.215728] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 20.216329] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 20.232054] ioatdma 0000:00:04.7: enabling device (0000 -> 0002)
[ 20.235905] cdc_acm 2-1.7:1.0: ttyACM0: USB ACM device
[ 20.236426] usbcore: registered new interface driver cdc_acm
[ 20.236428] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 20.253996] ioatdma 0000:80:04.0: enabling device (0000 -> 0002)
[ 20.254672] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 20.254673] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 20.254674] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 20.254675] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ 20.272299] ioatdma 0000:80:04.1: enabling device (0000 -> 0002)
[ 20.287343] ioatdma 0000:80:04.2: enabling device (0000 -> 0002)
[ 20.317963] ioatdma 0000:80:04.3: enabling device (0000 -> 0002)
[ 20.341468] ioatdma 0000:80:04.4: enabling device (0000 -> 0002)
[ 20.360076] ioatdma 0000:80:04.5: enabling device (0000 -> 0002)
[ 20.363003] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x000157, prod_id: 0x004a, dev_id: 0x21)
[ 20.391700] ioatdma 0000:80:04.6: enabling device (0000 -> 0002)
[ 20.395414] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
[ 20.406020] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 20.406051] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 20.406064] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 20.406070] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 20.406078] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 20.406083] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 20.406085] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[ 20.406093] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[ 20.406136] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[ 20.406140] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[ 20.406151] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[ 20.406157] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[ 20.406159] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[ 20.406167] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[ 20.406172] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[ 20.406174] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[ 20.406181] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[ 20.406187] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[ 20.406189] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[ 20.406196] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[ 20.406202] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[ 20.406204] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[ 20.406212] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[ 20.406217] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[ 20.406218] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[ 20.406225] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[ 20.406230] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[ 20.406233] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[ 20.406240] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[ 20.406245] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[ 20.406247] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[ 20.406254] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[ 20.406259] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[ 20.406387] EDAC MC0: Giving out device to module sb_edac controller Sandy Bridge SrcID#0_Ha#0: DEV 0000:7f:0e.0 (INTERRUPT)
[ 20.406490] EDAC MC1: Giving out device to module sb_edac controller Sandy Bridge SrcID#1_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
[ 20.406490] EDAC sbridge: Ver: 1.1.2
[ 20.408715] ioatdma 0000:80:04.7: enabling device (0000 -> 0002)
[ 20.409888] intel_rapl_common: Found RAPL domain package
[ 20.409890] intel_rapl_common: Found RAPL domain core
[ 20.409895] intel_rapl_common: Found RAPL domain dram
[ 20.419900] intel_rapl_common: Found RAPL domain package
[ 20.419902] intel_rapl_common: Found RAPL domain core
[ 20.419905] intel_rapl_common: Found RAPL domain dram
[ 20.455199] mpt2sas_cm0: port enable: complete from worker thread
[ 20.462121] mpt2sas_cm0: port enable: SUCCESS
[ 20.462540] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 20.462587] sd 1:0:0:0: tag#1344 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.462590] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 20.462592] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 20.462593] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1345)
[ 20.462594] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.462594] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000000)
[ 20.462595] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.462596] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.462597] sd 1:0:0:0: tag#1344 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.462598] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 20.462598] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 20.462599] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1345)
[ 20.462600] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.462600] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.462601] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.462602] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.462612] sd 1:0:0:0: Power-on or device reset occurred
[ 20.462747] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 20.462807] sd 1:0:1:0: tag#7352 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.462808] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 20.462809] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 20.462809] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(7353)
[ 20.462810] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.462810] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000000)
[ 20.462811] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.462812] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.462813] sd 1:0:1:0: tag#7352 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.462814] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 20.462814] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 20.462815] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(7353)
[ 20.462815] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.462816] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.462816] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.462817] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.462826] sd 1:0:1:0: Power-on or device reset occurred
[ 20.462916] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 20.463042] sd 1:0:2:0: Attached scsi generic sg3 type 0
[ 20.463083] sd 1:0:2:0: tag#5824 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463085] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 20.463085] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 20.463086] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(5825)
[ 20.463086] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463087] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000000)
[ 20.463088] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463088] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463089] sd 1:0:2:0: tag#5824 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463090] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 20.463090] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 20.463091] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(5825)
[ 20.463092] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463092] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.463093] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463093] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463102] sd 1:0:2:0: Power-on or device reset occurred
[ 20.463281] sd 1:0:3:0: Attached scsi generic sg4 type 0
[ 20.463317] sd 1:0:3:0: tag#8384 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463319] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 20.463320] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 20.463320] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(8385)
[ 20.463321] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463322] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000000)
[ 20.463322] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463323] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463324] sd 1:0:3:0: tag#8384 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463325] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 20.463325] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 20.463326] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(8385)
[ 20.463327] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463327] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.463328] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463329] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463338] sd 1:0:3:0: Power-on or device reset occurred
[ 20.463550] sd 1:0:4:0: Attached scsi generic sg5 type 0
[ 20.463554] sd 1:0:4:0: tag#8768 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463555] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 20.463556] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 20.463557] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(8769)
[ 20.463558] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463558] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000000)
[ 20.463559] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463560] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463561] sd 1:0:4:0: tag#8768 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463561] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 20.463562] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 20.463563] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(8769)
[ 20.463563] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463564] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.463564] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463565] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463573] sd 1:0:4:0: Power-on or device reset occurred
[ 20.463833] sd 1:0:5:0: tag#5828 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463834] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 20.463835] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 20.463836] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(5829)
[ 20.463836] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463837] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000000)
[ 20.463837] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463838] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463839] sd 1:0:5:0: tag#5828 CDB: Test Unit Ready 00 00 00 00 00 00
[ 20.463840] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 20.463840] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 20.463841] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(5829)
[ 20.463842] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.463844] sd 1:0:5:0: Attached scsi generic sg6 type 0
[ 20.463845] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.463846] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.463847] mpt2sas_cm0: [sense_key,asc,ascq]: [0x06,0x29,0x00], count(18)
[ 20.463853] sd 1:0:5:0: Power-on or device reset occurred
[ 20.464413] scsi 1:0:6:0: Attached scsi generic sg7 type 13
[ 20.469971] sd 1:0:5:0: [sdg] 3907027055 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 20.469974] sd 1:0:5:0: [sdg] 4096-byte physical blocks
[ 20.470646] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 20.471130] sd 1:0:1:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 20.473228] sd 1:0:3:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 20.473452] sd 1:0:2:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 20.473472] sd 1:0:0:0: [sdb] Write Protect is off
[ 20.473474] sd 1:0:0:0: [sdb] Mode Sense: 7f 00 10 08
[ 20.473603] sd 1:0:5:0: [sdg] Write Protect is off
[ 20.473605] sd 1:0:5:0: [sdg] Mode Sense: 7f 00 10 08
[ 20.473633] sd 1:0:1:0: [sdc] Write Protect is off
[ 20.473636] sd 1:0:1:0: [sdc] Mode Sense: 7f 00 10 08
[ 20.473871] sd 1:0:4:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 20.474341] sd 1:0:5:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 20.474377] sd 1:0:5:0: tag#8771 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 20.474379] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 20.474379] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 20.474381] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(8772)
[ 20.474381] mpt2sas_cm0: request_len(512), underflow(0), resid(512)
[ 20.474382] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.474383] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.474384] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00], count(18)
[ 20.475503] sd 1:0:3:0: [sde] Write Protect is off
[ 20.475507] sd 1:0:3:0: [sde] Mode Sense: 7f 00 10 08
[ 20.475805] sd 1:0:2:0: [sdd] Write Protect is off
[ 20.475808] sd 1:0:2:0: [sdd] Mode Sense: 7f 00 10 08
[ 20.475829] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 20.475860] sd 1:0:0:0: tag#8776 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 20.475861] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 20.475862] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 20.475863] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(8777)
[ 20.475864] mpt2sas_cm0: request_len(512), underflow(0), resid(512)
[ 20.475865] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.475866] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.475866] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00], count(18)
[ 20.476219] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 20.476234] sd 1:0:4:0: [sdf] Write Protect is off
[ 20.476235] sd 1:0:4:0: [sdf] Mode Sense: 7f 00 10 08
[ 20.476255] sd 1:0:1:0: tag#2441 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 20.476257] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 20.476257] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 20.476258] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(2442)
[ 20.476259] mpt2sas_cm0: request_len(512), underflow(0), resid(512)
[ 20.476260] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.476261] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.476261] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00], count(18)
[ 20.477690] sd 1:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 20.477720] sd 1:0:3:0: tag#2447 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 20.477721] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 20.477722] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 20.477723] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(2448)
[ 20.477723] mpt2sas_cm0: request_len(512), underflow(0), resid(512)
[ 20.477724] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.477725] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.477726] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00], count(18)
[ 20.478181] sd 1:0:2:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 20.478213] sd 1:0:2:0: tag#8202 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 20.478215] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 20.478215] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 20.478216] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(8203)
[ 20.478217] mpt2sas_cm0: request_len(512), underflow(0), resid(512)
[ 20.478218] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.478218] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.478219] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00], count(18)
[ 20.478963] sd 1:0:4:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 20.479206] sd 1:0:4:0: tag#2450 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 20.479207] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 20.479208] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 20.479209] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(2451)
[ 20.479210] mpt2sas_cm0: request_len(512), underflow(0), resid(512)
[ 20.479210] mpt2sas_cm0: tag(65535), transfer_count(0), sc->result(0x00000002)
[ 20.479211] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.479212] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x20,0x00], count(18)
[ 20.529507] scsi 1:0:6:0: tag#4360 CDB: Receive Diagnostic 1c 01 07 00 20 00
[ 20.529512] mpt2sas_cm0: sas_address(0x5001940000d2c23e), phy(24)
[ 20.529514] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(24)
[ 20.529516] mpt2sas_cm0: handle(0x0018), ioc_status(scsi data underrun)(0x0045), smid(4361)
[ 20.529518] mpt2sas_cm0: request_len(32), underflow(0), resid(32)
[ 20.529520] mpt2sas_cm0: tag(767), transfer_count(0), sc->result(0x00000002)
[ 20.529522] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.529524] mpt2sas_cm0: [sense_key,asc,ascq]: [0x05,0x35,0x01], count(96)
[ 20.532216] sd 1:0:0:0: [sdb] tag#1600 CDB: ATA command pass through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 20.532219] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 20.532221] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 20.532223] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1601)
[ 20.532225] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 20.532227] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 20.532229] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.532231] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.544381] random: crng init done
[ 20.544384] random: 5 urandom warning(s) missed due to ratelimiting
[ 20.549750] sd 1:0:3:0: [sde] tag#4363 CDB: ATA command pass through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 20.549754] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 20.549755] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 20.549758] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(4364)
[ 20.549759] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 20.549761] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 20.549762] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.549764] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.550456] sd 1:0:1:0: [sdc] tag#4364 CDB: ATA command pass through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 20.550458] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 20.550458] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 20.550459] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(4365)
[ 20.550460] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 20.550461] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 20.550461] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.550462] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.552050] sd 1:0:4:0: [sdf] tag#8064 CDB: ATA command pass through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 20.552053] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 20.552055] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 20.552057] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(8065)
[ 20.552059] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 20.552061] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 20.552063] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.552065] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.553546] sd 1:0:2:0: [sdd] tag#1612 CDB: ATA command pass through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 20.553547] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 20.553548] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 20.553549] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1613)
[ 20.553549] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 20.553550] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 20.553551] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.553551] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.676494] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 20.691318] sd 1:0:3:0: [sde] Attached SCSI disk
[ 20.736932] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 20.741155] sd 1:0:2:0: [sdd] Attached SCSI disk
[ 20.747834] sd 1:0:4:0: [sdf] Attached SCSI disk
[ 20.791108] sd 1:0:0:0: [sdb] tag#7832 CDB: ATA command pass through(16) 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[ 20.791114] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 20.791116] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 20.791119] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(7833)
[ 20.791121] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.791123] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 20.791125] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.791139] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.793977] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 20.798887] sd 1:0:0:0: [sdb] tag#6977 CDB: ATA command pass through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 20.798890] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 20.798892] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 20.798894] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(6978)
[ 20.798895] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 20.798897] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 20.798899] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.798901] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.808675] sd 1:0:3:0: [sde] tag#7833 CDB: ATA command pass through(16) 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[ 20.808678] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 20.808680] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 20.808682] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(7834)
[ 20.808683] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.808685] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 20.808687] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.808689] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.860558] md/raid:md127: device sdf operational as raid disk 4
[ 20.860559] md/raid:md127: device sdd operational as raid disk 2
[ 20.860560] md/raid:md127: device sdc operational as raid disk 1
[ 20.860560] md/raid:md127: device sde operational as raid disk 3
[ 20.860561] md/raid:md127: device sdb operational as raid disk 0
[ 20.861155] md/raid:md127: raid level 6 active with 5 out of 5 devices, algorithm 2
[ 20.901676] sd 1:0:2:0: [sdd] tag#6784 CDB: ATA command pass through(16) 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[ 20.901682] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 20.901684] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 20.901687] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(6785)
[ 20.901689] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.901691] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 20.901693] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.901695] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.901878] sd 1:0:1:0: [sdc] tag#1642 CDB: ATA command pass through(16) 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[ 20.901881] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 20.901882] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 20.901884] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1643)
[ 20.901886] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 20.901887] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 20.901889] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 20.901891] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 20.921069] md127: detected capacity change from 0 to 6000793878528
[ 21.125654] sdg: sdg1 sdg2
[ 21.141454] sd 1:0:5:0: [sdg] tag#1293 CDB: ATA command pass through(12)/Blank a1 08 2e 00 01 00 00 00 00 ec 00 00
[ 21.141461] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 21.141463] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 21.141466] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1294)
[ 21.141467] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 21.141468] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 21.141470] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 21.141471] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 21.192593] sd 1:0:5:0: [sdg] Attached SCSI disk
[ 21.192683] ses 1:0:6:0: Attached Enclosure device
[ 21.767304] sd 1:0:4:0: [sdf] tag#4354 CDB: ATA command pass through(16) 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[ 21.767310] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 21.767313] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 21.767316] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(4355)
[ 21.767318] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 21.767330] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 21.767331] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 21.767332] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 22.986257] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.013121] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.031908] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.051122] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.059958] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.066643] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.075546] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.085951] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.188911] EXT4-fs (dm-17): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.208195] EXT4-fs (dm-16): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.216557] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.225172] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.248532] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 23.431347] bonding: bond0 is being created...
[ 23.803319] new mount options do not match the existing superblock, will be ignored
[ 23.971241] sd 1:0:0:0: [sdb] tag#1622 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 23.971245] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 23.971246] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 23.971247] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1623)
[ 23.971248] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 23.971249] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 23.971250] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 23.971251] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 23.974664] mlx4_en: eth40a: Steering Mode 1
[ 24.031287] mlx4_en: eth40b: Steering Mode 1
[ 24.039568] sd 1:0:0:0: [sdb] tag#1626 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.039574] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 24.039576] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 24.039591] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1627)
[ 24.039592] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.039593] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.039594] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.039594] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.041455] sd 1:0:1:0: [sdc] tag#1629 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.041469] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 24.041470] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 24.041471] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1630)
[ 24.041472] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.041472] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.041473] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.041474] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.043161] sd 1:0:2:0: [sdd] tag#1631 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.043163] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 24.043164] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 24.043165] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1632)
[ 24.043166] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.043166] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.043167] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.043168] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.044896] sd 1:0:3:0: [sde] tag#1632 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.044898] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 24.044899] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 24.044900] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1633)
[ 24.044901] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.044901] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.044902] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.044903] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.046573] sd 1:0:4:0: [sdf] tag#1633 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.046575] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 24.046576] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 24.046577] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1634)
[ 24.046577] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.046578] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.046579] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.046580] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.047441] sd 1:0:5:0: [sdg] tag#1634 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.047442] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 24.047443] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 24.047444] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1635)
[ 24.047445] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.047446] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.047446] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.047447] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.082935] pps_ldisc: PPS line discipline registered
[ 24.144548] mlx4_en: eth40b: Close port called
[ 24.188151] mlx4_en: eth40a: Close port called
[ 24.220576] mlx4_en: eth40b: Link Down
[ 24.220579] mlx4_en: eth40a: Link Down
[ 24.230469] mlx4_en: eth40b: Steering Mode 1
[ 24.251253] bond0: (slave eth40b): Enslaving as a backup interface with a down link
[ 24.262243] mlx4_en: eth40a: Steering Mode 1
[ 24.282656] bond0: (slave eth40a): Enslaving as a backup interface with a down link
[ 24.297872] <mlx4_ib> mlx4_ib_add: counter index 4 for port 1 allocated 1
[ 24.564307] sd 1:0:0:0: [sdb] tag#1642 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.564325] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 24.564327] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 24.564328] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1643)
[ 24.564329] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.564330] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.564331] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.564331] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.565986] sd 1:0:1:0: [sdc] tag#1646 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.565991] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 24.565993] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 24.565996] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1647)
[ 24.565998] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.565999] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.566013] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.566013] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.567547] sd 1:0:2:0: [sdd] tag#1647 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.567552] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 24.567554] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 24.567557] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1648)
[ 24.567559] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.567560] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.567574] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.567575] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.569091] sd 1:0:3:0: [sde] tag#1648 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.569094] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 24.569095] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 24.569096] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1649)
[ 24.569097] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.569097] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.569098] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.569099] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.570620] sd 1:0:4:0: [sdf] tag#1649 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.570625] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 24.570627] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 24.570630] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1650)
[ 24.570632] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.570645] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.570646] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.570646] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.571552] sd 1:0:5:0: [sdg] tag#1650 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.571557] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 24.571559] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 24.571562] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1651)
[ 24.571564] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.571565] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.571579] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.571579] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.577517] sd 1:0:0:0: [sdb] tag#1645 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 24.577519] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 24.577520] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 24.577521] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1646)
[ 24.577522] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 24.577522] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 24.577523] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.577524] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.778362] pps pps0: new PPS source serial1
[ 24.778383] pps pps0: source "/dev/ttyS1" added
[ 24.847827] sd 1:0:1:0: [sdc] tag#1610 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 24.847830] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 24.847832] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 24.847833] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1611)
[ 24.847834] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 24.847834] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 24.847835] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.847836] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.950757] sd 1:0:1:0: [sdc] tag#1615 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 24.950762] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 24.950764] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 24.950767] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1616)
[ 24.950769] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 24.950770] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 24.950772] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.950786] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 24.985710] sd 1:0:1:0: [sdc] tag#1619 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 24.985715] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 24.985717] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 24.985720] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1620)
[ 24.985722] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 24.985723] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 24.985737] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 24.985737] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.117717] sd 1:0:1:0: [sdc] tag#1629 CDB: ATA command pass through(16) 85 08 2e 00 d1 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.117722] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 25.117724] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 25.117727] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1630)
[ 25.117728] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.117742] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.117743] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.117744] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.270162] sd 1:0:1:0: [sdc] tag#1639 CDB: ATA command pass through(16) 85 08 2e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.270164] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 25.270165] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 25.270166] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1640)
[ 25.270167] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.270167] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.270168] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.270169] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.400727] sd 1:0:1:0: [sdc] tag#1649 CDB: ATA command pass through(16) 85 06 20 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 25.400732] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 25.400734] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 25.400737] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1650)
[ 25.400738] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 25.400740] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 25.400754] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.400755] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.443709] sd 1:0:3:0: [sde] tag#1657 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 25.443714] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 25.443716] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 25.443719] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1658)
[ 25.443720] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 25.443734] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 25.443735] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.443735] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.445654] sd 1:0:3:0: [sde] tag#1658 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 25.445659] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 25.445660] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 25.445663] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1659)
[ 25.445665] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.445667] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.445669] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.445682] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.531420] sd 1:0:3:0: [sde] tag#1659 CDB: ATA command pass through(16) 85 08 2e 00 d1 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.531425] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 25.531427] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 25.531430] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1660)
[ 25.531432] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.531433] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.531435] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.531438] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.532866] sd 1:0:3:0: [sde] tag#1660 CDB: ATA command pass through(16) 85 08 2e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.532871] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 25.532873] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 25.532875] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1661)
[ 25.532877] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.532890] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.532891] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.532892] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.597757] sd 1:0:3:0: [sde] tag#1661 CDB: ATA command pass through(16) 85 06 20 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 25.597763] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 25.597764] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 25.597767] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1662)
[ 25.597769] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 25.597771] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 25.597773] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.597786] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.640368] sd 1:0:4:0: [sdf] tag#1662 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 25.640370] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 25.640371] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 25.640372] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1663)
[ 25.640373] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 25.640373] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 25.640374] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.640375] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.711335] sd 1:0:4:0: [sdf] tag#1663 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 25.711340] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 25.711342] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 25.711344] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1664)
[ 25.711346] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.711348] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.711350] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.711352] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.776946] sd 1:0:4:0: [sdf] tag#1646 CDB: ATA command pass through(16) 85 08 2e 00 d1 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.776951] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 25.776953] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 25.776956] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1647)
[ 25.776958] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.776959] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.776973] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.776974] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.778366] sd 1:0:4:0: [sdf] tag#1647 CDB: ATA command pass through(16) 85 08 2e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.778372] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 25.778374] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 25.778376] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1648)
[ 25.778378] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.778380] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.778394] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.778395] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.843288] sd 1:0:4:0: [sdf] tag#1648 CDB: ATA command pass through(16) 85 06 20 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 25.843294] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 25.843296] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 25.843298] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1649)
[ 25.843300] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 25.843302] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 25.843316] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.843317] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.885637] sd 1:0:5:0: [sdg] tag#1649 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 25.885640] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 25.885641] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 25.885642] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1650)
[ 25.885643] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 25.885643] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 25.885644] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.885645] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.886911] sd 1:0:5:0: [sdg] tag#1650 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 25.886916] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 25.886929] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 25.886930] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1651)
[ 25.886931] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.886932] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.886933] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.886933] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.890416] sd 1:0:5:0: [sdg] tag#1651 CDB: ATA command pass through(16) 85 08 2e 00 d1 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.890421] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 25.890423] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 25.890426] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1652)
[ 25.890428] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.890429] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.890431] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.890445] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.893719] sd 1:0:5:0: [sdg] tag#1652 CDB: ATA command pass through(16) 85 08 2e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00
[ 25.893725] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 25.893726] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 25.893729] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1653)
[ 25.893731] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 25.893733] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 25.893746] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.893747] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 25.958658] sd 1:0:5:0: [sdg] tag#1653 CDB: ATA command pass through(16) 85 06 20 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 25.958663] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 25.958665] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 25.958668] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1654)
[ 25.958681] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 25.958682] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 25.958683] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 25.958684] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.000308] sd 1:0:0:0: [sdb] tag#1661 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 26.000311] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 26.000312] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 26.000313] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1662)
[ 26.000314] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 26.000314] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 26.000315] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.000316] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.002201] sd 1:0:0:0: [sdb] tag#1662 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 26.002206] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 26.002208] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 26.002211] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1663)
[ 26.002224] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 26.002225] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 26.002226] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.002227] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.008756] sd 1:0:1:0: [sdc] tag#1660 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 26.008762] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 26.008763] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 26.008766] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1661)
[ 26.008768] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 26.008770] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 26.008772] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.008785] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.088072] sd 1:0:0:0: [sdb] tag#1600 CDB: ATA command pass through(16) 85 08 2e 00 d1 00 01 00 00 00 4f 00 c2 00 b0 00
[ 26.088078] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 26.088080] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 26.088083] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1601)
[ 26.088084] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 26.088097] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 26.088098] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.088099] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.123519] sd 1:0:0:0: [sdb] tag#1607 CDB: ATA command pass through(16) 85 08 2e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00
[ 26.123524] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 26.123526] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 26.123529] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1608)
[ 26.123531] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 26.123532] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 26.123546] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.123547] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.204406] sd 1:0:0:0: [sdb] tag#1609 CDB: ATA command pass through(16) 85 06 20 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 26.204411] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 26.204413] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 26.204416] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1610)
[ 26.204418] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 26.204419] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 26.204432] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.204433] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.269110] sd 1:0:2:0: [sdd] tag#1626 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 26.269116] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 26.269118] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 26.269121] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1627)
[ 26.269122] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 26.269124] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 26.269126] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.269140] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.287528] sd 1:0:2:0: [sdd] tag#1633 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 26.287533] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 26.287535] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 26.287538] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1634)
[ 26.287539] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 26.287541] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 26.287543] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.287556] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.297157] sd 1:0:2:0: [sdd] tag#1641 CDB: ATA command pass through(16) 85 08 2e 00 00 00 01 00 00 00 00 00 00 00 ec 00
[ 26.297162] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 26.297164] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 26.297167] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1642)
[ 26.297169] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 26.297170] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 26.297184] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.297184] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.477743] sd 1:0:2:0: [sdd] tag#1662 CDB: ATA command pass through(16) 85 08 2e 00 d1 00 01 00 00 00 4f 00 c2 00 b0 00
[ 26.477748] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 26.477750] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 26.477753] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1663)
[ 26.477754] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 26.477756] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 26.477770] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.477771] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.478596] mlx4_en: eth40b: Link Up
[ 26.490125] bond0: (slave eth40b): link status up, enabling it in 0 ms
[ 26.490833] bond0: (slave eth40b): link status definitely up, 40000 Mbps full duplex
[ 26.490835] bond0: (slave eth40b): making interface the new active one
[ 26.490935] bond0: active interface up!
[ 26.490958] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 26.497115] sd 1:0:2:0: [sdd] tag#1615 CDB: ATA command pass through(16) 85 08 2e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00
[ 26.497121] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 26.497123] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 26.497126] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1616)
[ 26.497127] mpt2sas_cm0: request_len(512), underflow(0), resid(0)
[ 26.497129] mpt2sas_cm0: tag(0), transfer_count(512), sc->result(0x00000002)
[ 26.497142] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.497143] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.583559] mlx4_en: eth40a: Link Up
[ 26.594132] bond0: (slave eth40a): link status up, enabling it in 200 ms
[ 26.594137] bond0: (slave eth40a): invalid new link 3 on slave
[ 26.810627] bond0: (slave eth40a): link status definitely up, 40000 Mbps full duplex
[ 26.860741] sd 1:0:2:0: [sdd] tag#1622 CDB: ATA command pass through(16) 85 06 20 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 26.860746] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 26.860748] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 26.860751] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1623)
[ 26.860752] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 26.860765] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 26.860766] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 26.860767] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 26.874451] igb 0000:07:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 26.874661] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.118274] sd 1:0:2:0: [sdd] tag#1635 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 27.118276] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 27.118277] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 27.118278] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1636)
[ 27.118278] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 27.118279] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 27.118280] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 27.118281] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 27.422623] sd 1:0:3:0: [sde] tag#1649 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 27.422628] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 27.422631] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 27.422633] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1650)
[ 27.422646] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 27.422647] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 27.422648] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 27.422648] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 28.199314] sd 1:0:3:0: [sde] tag#1602 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 28.199317] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 28.199319] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 28.199320] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1603)
[ 28.199321] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 28.199322] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 28.199323] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 28.199324] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 28.476414] sd 1:0:4:0: [sdf] tag#1639 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 28.476420] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 28.476422] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 28.476425] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1640)
[ 28.476426] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 28.476439] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 28.476440] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 28.476441] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 29.185085] sd 1:0:4:0: [sdf] tag#1614 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 29.185087] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 29.185088] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 29.185089] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1615)
[ 29.185090] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 29.185091] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 29.185091] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 29.185092] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 29.314028] sd 1:0:5:0: [sdg] tag#1604 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 29.314033] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 29.314034] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 29.314036] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1605)
[ 29.314037] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 29.314038] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 29.314039] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 29.314040] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 29.322727] sd 1:0:5:0: [sdg] tag#1615 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 29.322733] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 29.322734] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 29.322737] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1616)
[ 29.322739] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 29.322740] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 29.322743] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 29.322745] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 29.323614] sd 1:0:0:0: [sdb] tag#1616 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 29.323619] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 29.323621] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 29.323623] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1617)
[ 29.323625] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 29.323638] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 29.323639] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 29.323640] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 29.404151] sd 1:0:0:0: [sdb] tag#1617 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 29.404156] mpt2sas_cm0: sas_address(0x5001940000d2c200), phy(0)
[ 29.404158] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(0)
[ 29.404161] mpt2sas_cm0: handle(0x0012), ioc_status(success)(0x0000), smid(1618)
[ 29.404162] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 29.404164] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 29.404166] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 29.404180] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 29.904409] sd 1:0:1:0: [sdc] tag#1632 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 29.904411] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 29.904412] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 29.904413] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1633)
[ 29.904413] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 29.904414] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 29.904415] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 29.904416] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 29.983682] sd 1:0:1:0: [sdc] tag#1634 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 29.983688] mpt2sas_cm0: sas_address(0x5001940000d2c201), phy(1)
[ 29.983690] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(1)
[ 29.983692] mpt2sas_cm0: handle(0x0013), ioc_status(success)(0x0000), smid(1635)
[ 29.983706] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 29.983707] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 29.983707] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 29.983708] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 30.500607] sd 1:0:2:0: [sdd] tag#1650 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 30.500612] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 30.500614] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 30.500617] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1651)
[ 30.500618] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 30.500620] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 30.500622] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 30.500636] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 30.585499] sd 1:0:2:0: [sdd] tag#1651 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 30.585505] mpt2sas_cm0: sas_address(0x5001940000d2c202), phy(2)
[ 30.585507] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(2)
[ 30.585509] mpt2sas_cm0: handle(0x0014), ioc_status(success)(0x0000), smid(1652)
[ 30.585511] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 30.585513] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 30.585526] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 30.585527] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 31.200762] sd 1:0:3:0: [sde] tag#1655 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 31.200767] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 31.200769] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 31.200772] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1656)
[ 31.200774] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 31.200775] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 31.200777] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 31.200779] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 31.263958] sd 1:0:3:0: [sde] tag#1656 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 31.263963] mpt2sas_cm0: sas_address(0x5001940000d2c203), phy(3)
[ 31.263965] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(3)
[ 31.263968] mpt2sas_cm0: handle(0x0015), ioc_status(success)(0x0000), smid(1657)
[ 31.263970] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 31.263971] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 31.263973] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 31.263975] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 31.756039] sd 1:0:4:0: [sdf] tag#1660 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 31.756046] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 31.756049] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 31.756052] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1661)
[ 31.756054] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 31.756055] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 31.756057] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 31.756060] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 31.834462] sd 1:0:4:0: [sdf] tag#1661 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 31.834468] mpt2sas_cm0: sas_address(0x5001940000d2c207), phy(7)
[ 31.834470] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(7)
[ 31.834473] mpt2sas_cm0: handle(0x0016), ioc_status(success)(0x0000), smid(1662)
[ 31.834474] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 31.834476] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 31.834478] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 31.834480] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 32.318112] sd 1:0:5:0: [sdg] tag#1602 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 32.318118] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 32.318120] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 32.318122] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1603)
[ 32.318124] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 32.318126] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 32.318128] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 32.318130] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 32.391614] sd 1:0:5:0: [sdg] tag#1603 CDB: ATA command pass through(16) 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00
[ 32.391619] mpt2sas_cm0: sas_address(0x5001940000d2c20f), phy(15)
[ 32.391621] mpt2sas_cm0: enclosure logical id(0x5001940000d2c23f), slot(15)
[ 32.391624] mpt2sas_cm0: handle(0x0017), ioc_status(success)(0x0000), smid(1604)
[ 32.391625] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 32.391627] mpt2sas_cm0: tag(0), transfer_count(0), sc->result(0x00000002)
[ 32.391629] mpt2sas_cm0: scsi_status(check condition)(0x02), scsi_state(autosense valid )(0x01)
[ 32.391631] mpt2sas_cm0: [sense_key,asc,ascq]: [0x01,0x00,0x1d], count(22)
[ 32.681307] NFSD: Using UMH upcall client tracking operations.
[ 32.681310] NFSD: starting 90-second grace period (net f00000a8)
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug 209177 - mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
[not found] ` <CA+RiK65kPWbTHdKk_3qssEE75ZdihjiY8CMQc_T8f3c92DPDkg@mail.gmail.com>
@ 2020-09-30 14:01 ` Suganath Prabu Subramani
2020-09-30 18:58 ` Sundar Nagarajan
0 siblings, 1 reply; 5+ messages in thread
From: Suganath Prabu Subramani @ 2020-09-30 14:01 UTC (permalink / raw)
To: Sundar Nagarajan
Cc: linux-scsi, Sathya Prakash Veerichetty, Sreekanth Reddy,
James E.J. Bottomley, Martin K. Petersen, PDL-MPT-FUSIONLINUX
[-- Attachment #1: Type: text/plain, Size: 16803 bytes --]
Hi Sundar,
Thanks for the logs,
From log, I could see that the HBA queue depth is very high "32455" as
shown below.
[ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128).
In this patch "https://patchwork.kernel.org/patch/11505139/" driver is
allocating the
DMA-able memory for RDPQ's in sets of 16 reply queues using limitation
of Ventura
series controller.
With 32455 queue depth and above patch, Driver may request a large DMA-able
memory where the kernel may fail to allocate.
To confirm this, Please try by tuning the queue depth to 8000/10000 using the
module parameter "mpt3sas.max_queue_depth=10000".
Thanks,
Suganath
On Wed, Sep 30, 2020 at 7:22 PM Suganath Prabu Subramani
<suganath-prabu.subramani@broadcom.com> wrote:
>
> Hi Sundar,
>
> Thanks for the logs,
> From log, i could see that HBA queue depth is very high "32455" as shown below.
> [ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128).
>
> In this patch "https://patchwork.kernel.org/patch/11505139/" driver is allocating the
> DMA-able memory for RDPQ's in sets of 16 reply queues using limitation of Ventura
> series controller.
>
> With 32455 queue depth and above patch driver may request a large DMA-able
> memory where kernel may fail to allocate.
>
> To confirm this, Please try by tuning the queue depth to 8000/10000 using the
> module parameter "mpt3sas.max_queue_depth=10000".
>
> Thanks,
> Suganath
>
> On Wed, Sep 30, 2020 at 1:34 AM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
>>
>> Thanks for your suggestions.
>>
>> I downloaded and used stock kernel 5.8.12 from kernel.org.
>> The two patches you pointed at are already applied in 5.8.12 (as you
>> had indicated).
>>
>> The problem still exists.
>> EDITED dmesg below, full dmesg output attached
>> I have also updated my kernel bugzilla report:
>> https://bugzilla.kernel.org/show_bug.cgi?id=209177
>>
>>
>> [ 10.110816] mpt2sas_cm0: mpt3sas_base_attach
>> [ 10.110913] dca service started, version 1.12.1
>> [ 10.122668] mpt2sas_cm0: mpt3sas_base_map_resources
>> [ 10.140735] usb 2-1.7: New USB device found, idVendor=1546,
>> idProduct=01a6, bcdDevice= 7.03
>> [ 10.147693] scsi host2: ahci
>> [ 10.163432] usb 2-1.7: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=0
>> [ 10.173819] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED,
>> total mem (197972228 kB)
>> [ 10.189366] usb 2-1.7: Product: u-blox 6 - GPS Receiver
>> [ 10.206466] mpt2sas_cm0: _base_get_ioc_facts
>> [ 10.219986] usb 2-1.7: Manufacturer: u-blox AG - www.u-blox.com
>> [ 10.246805] mpt2sas_cm0: _base_wait_for_iocstate
>> [ 10.260177] scsi host3: ahci
>> [ 10.271074] scsi host4: ahci
>> [ 10.281958] scsi host5: ahci
>> [ 10.292565] scsi host6: ahci
>> [ 10.299138] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
>> [ 10.303153] scsi host7: ahci
>> [ 10.328158] ata1: SATA max UDMA/133 abar m2048@0xd1700000 port
>> 0xd1700100 irq 53
>> [ 10.343989] ata2: SATA max UDMA/133 abar m2048@0xd1700000 port
>> 0xd1700180 irq 53
>> [ 10.359546] ata3: SATA max UDMA/133 abar m2048@0xd1700000 port
>> 0xd1700200 irq 53
>> [ 10.374807] ata4: SATA max UDMA/133 abar m2048@0xd1700000 port
>> 0xd1700280 irq 53
>> [ 10.389813] ata5: SATA max UDMA/133 abar m2048@0xd1700000 port
>> 0xd1700300 irq 53
>> [ 10.404635] ata6: SATA max UDMA/133 abar m2048@0xd1700000 port
>> 0xd1700380 irq 53
>> [ 10.412371] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit
>> 1.00 PQ: 0 ANSI: 6
>> [ 10.433718] usb 2-1.8: New USB device found, idVendor=051d,
>> idProduct=0003, bcdDevice= 1.06
>> [ 10.435546] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 10.450887] usb 2-1.8: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=3
>> [ 10.464152] offset:data
>> [ 10.478544] usb 2-1.8: Product: Smart-UPS 2200 FW:UPS 06.3 / MCU 11.0
>> [ 10.488004] mpt2sas_cm0: [0x00]:03100200
>> [ 10.488004] mpt2sas_cm0: [0x04]:00002300
>> [ 10.488005] mpt2sas_cm0: [0x08]:00000000
>> [ 10.488005] mpt2sas_cm0: [0x0c]:00000000
>> [ 10.488006] mpt2sas_cm0: [0x10]:00000000
>> [ 10.488007] mpt2sas_cm0: [0x14]:00010080
>> [ 10.488007] mpt2sas_cm0: [0x18]:22137ec7
>> [ 10.488008] mpt2sas_cm0: [0x1c]:0001285c
>> [ 10.488017] mpt2sas_cm0: [0x20]:14000600
>> [ 10.501945] usb 2-1.8: Manufacturer: American Power Conversion
>> [ 10.501961] usb 2-1.8: SerialNumber: JS1051006712
>> [ 10.513140] mpt2sas_cm0: [0x24]:00000020
>> [ 10.513140] mpt2sas_cm0: [0x28]:04000020
>> [ 10.513141] mpt2sas_cm0: [0x2c]:00810080
>> [ 10.513141] mpt2sas_cm0: [0x30]:007f0003
>> [ 10.513142] mpt2sas_cm0: [0x34]:0020ffe0
>> [ 10.513154] mpt2sas_cm0: [0x38]:008004b0
>> [ 10.513154] mpt2sas_cm0: [0x3c]:00000011
>> [ 10.513155] mpt2sas_cm0: [0x40]:00000000
>> [ 10.513156] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default
>> host page size to 4k
>> [ 10.524350] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks:
>> (15.4 GB/14.3 GiB)
>> [ 10.535178] mpt2sas_cm0: CurrentHostPageSize(0)
>> [ 10.548205] sd 0:0:0:0: [sda] Write Protect is off
>> [ 10.556610] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
>> [ 10.566972] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
>> [ 10.577132] mpt2sas_cm0: request frame size(128), reply frame size(128)
>> [ 10.589074] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [ 10.597175] mpt2sas_cm0: msix is supported, vector_count(1)
>> [ 10.692084] hid: raw HID events driver (C) Jiri Kosina
>> [ 10.692148] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
>> [ 10.692149] igb: Copyright (c) 2007-2014 Intel Corporation.
>> [ 10.705215] mpt2sas_cm0: MSI-X vectors supported: 1
>> [ 10.705216] no of cores: 32, max_msix_vectors: -1
>> [ 10.705217] mpt2sas_cm0: 0 1
>> [ 10.705359] mpt2sas_cm0: High IOPs queues : disabled
>> [ 10.757534] ata4: SATA link down (SStatus 0 SControl 300)
>> [ 10.761609] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 56
>> [ 10.761611] mpt2sas_cm0: iomem(0x00000000d1380000),
>> mapped(0x(____ptrval____)), size(16384)
>> [ 10.761613] mpt2sas_cm0: ioport(0x0000000000002000), size(256)
>> [ 10.781648] ata1: SATA link down (SStatus 0 SControl 300)
>> [ 10.793026] mpt2sas_cm0: _base_get_ioc_facts
>> [ 10.804281] ata6: SATA link down (SStatus 0 SControl 300)
>> [ 10.817492] mpt2sas_cm0: _base_wait_for_iocstate
>> [ 10.821742] usbcore: registered new interface driver usbhid
>> [ 10.821743] usbhid: USB HID core driver
>> [ 10.829361] ata3: SATA link down (SStatus 0 SControl 300)
>> [ 10.906674] offset:data
>> [ 10.917639] ata5: SATA link down (SStatus 0 SControl 300)
>> [ 10.917791] input: American Megatrends Inc. Virtual Keyboard and
>> Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046B:FF10.0001/input/input2
>> [ 10.917893] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID
>> v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse]
>> on usb-0000:00:1d.0-1.4/input0
>> [ 10.918019] input: American Megatrends Inc. Virtual Keyboard and
>> Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046B:FF10.0002/input/input3
>> [ 10.918245] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID
>> v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
>> usb-0000:00:1d.0-1.4/input1
>> [ 10.918692] hid-generic 0003:051D:0003.0003: hiddev0,hidraw2: USB
>> HID v1.00 Device [American Power Conversion Smart-UPS 2200 FW:UPS 06.3
>> / MCU 11.0] on usb-0000:00:1d.0-1.8/input0
>> [ 10.925117] random: fast init done
>> [ 10.929067] mpt2sas_cm0: [0x00]:03100200
>> [ 10.939600] ata2: SATA link down (SStatus 0 SControl 300)
>> [ 10.951294] mpt2sas_cm0: [0x04]:00002300
>> [ 10.984639] sda: sda1 sda2 sda3
>> [ 10.985180] mpt2sas_cm0: [0x08]:00000000
>> [ 11.005873] sd 0:0:0:0: [sda] Attached SCSI removable disk
>> [ 11.006343] mpt2sas_cm0: [0x0c]:00000000
>> [ 11.285853] mpt2sas_cm0: [0x10]:00000000
>> [ 11.298311] mpt2sas_cm0: [0x14]:00010080
>> [ 11.310617] mpt2sas_cm0: [0x18]:22137ec7
>> [ 11.322831] mpt2sas_cm0: [0x1c]:0001285c
>> [ 11.334964] mpt2sas_cm0: [0x20]:14000600
>> [ 11.347072] mpt2sas_cm0: [0x24]:00000020
>> [ 11.359060] mpt2sas_cm0: [0x28]:04000020
>> [ 11.370880] mpt2sas_cm0: [0x2c]:00810080
>> [ 11.382482] mpt2sas_cm0: [0x30]:007f0003
>> [ 11.393927] mpt2sas_cm0: [0x34]:0020ffe0
>> [ 11.405226] mpt2sas_cm0: [0x38]:008004b0
>> [ 11.416400] mpt2sas_cm0: [0x3c]:00000011
>> [ 11.427427] mpt2sas_cm0: [0x40]:00000000
>> [ 11.438335] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default
>> host page size to 4k
>> [ 11.453888] mpt2sas_cm0: CurrentHostPageSize(0)
>> [ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
>> [ 11.479358] mpt2sas_cm0: request frame size(128), reply frame size(128)
>> [ 11.493291] mpt2sas_cm0: _base_make_ioc_ready
>> [ 11.507135] mpt2sas_cm0: _base_get_port_facts
>> [ 11.519349] igb 0000:07:00.0: added PHC on eth0
>> [ 11.530468] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
>> [ 11.544129] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:e9
>> [ 11.558034] igb 0000:07:00.0: eth0: PBA No: 100000-000
>> [ 11.569355] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx
>> queue(s), 8 tx queue(s)
>> [ 11.616691] offset:data
>> [ 11.624765] mpt2sas_cm0: [0x00]:05070000
>> [ 11.634321] mpt2sas_cm0: [0x04]:00000000
>> [ 11.643579] mpt2sas_cm0: [0x08]:00000000
>> [ 11.652537] mpt2sas_cm0: [0x0c]:00000000
>> [ 11.661248] mpt2sas_cm0: [0x10]:00000000
>> [ 11.669892] mpt2sas_cm0: [0x14]:00003000
>> [ 11.678382] mpt2sas_cm0: [0x18]:00000100
>> [ 11.686741] mpt2sas_cm0: _base_allocate_memory_pools
>> [ 11.696171] mpt2sas_cm0: scatter gather: sge_in_main_msg(1),
>> sge_per_chain(9), sge_per_io(128), chains_per_io(15)
>> [ 11.715890] ------------[ cut here ]------------
>> [ 11.725227] WARNING: CPU: 0 PID: 5 at mm/page_alloc.c:4831
>> __alloc_pages_nodemask+0x1ce/0x310
>> [ 11.739330] Modules linked in: fjes(-) hid_generic usbhid hid
>> crct10dif_pclmul igb(+) crc32_pclmul ghash_clmulni_intel dca
>> aesni_intel ptp ahci crypto_simd mpt3sas(+) pps_core xhci_pci cryptd
>> mlx4_core(+) raid_class i2c_algo_bit libahci xhci_pci_renesas
>> glue_helper scsi_transport_sas wmi uas usb_storage deflate
>> [ 11.791023] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.8.12 #1
>> [ 11.803622] Hardware name: ZTSYSTEM CYPRESS11 /S2600CP ,
>> BIOS SE5C600.86B.02.06.0006.032420170950 03/24/2017
>> [ 11.827610] Workqueue: events work_for_cpu_fn
>> [ 11.838884] RIP: 0010:__alloc_pages_nodemask+0x1ce/0x310
>> [ 11.851367] Code: ff ff ff 65 48 8b 04 25 c0 7b 01 00 48 05 78 08
>> 00 00 41 bd 01 00 00 00 48 89 44 24 08 e9 05 ff ff ff 81 e7 00 20 00
>> 00 75 02 <0f> 0b 45 31 ed eb 95 44 8b 64 24 18 65 8b 05 1f a6 7a 4b 89
>> c0 48
>> [ 11.893686] RSP: 0018:ffffc18e000bbc98 EFLAGS: 00010246
>> [ 11.906822] RAX: 0000000000000000 RBX: 0000000000000cc0 RCX: 0000000000000000
>> [ 11.922228] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
>> [ 11.937510] RBP: 000000000075d000 R08: 000000000075d000 R09: ffffffffffffffff
>> [ 11.952755] R10: 0000000000000000 R11: ffff9e6a16c22350 R12: ffffffffffffffff
>> [ 11.967942] R13: 0000000000000000 R14: ffff9e5215c34f58 R15: ffff9e52163590b0
>> [ 11.983165] FS: 0000000000000000(0000) GS:ffff9e521ea00000(0000)
>> knlGS:0000000000000000
>> [ 11.999566] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 12.013320] CR2: 000055c7853e9ef0 CR3: 00000003d620a003 CR4: 00000000000606f0
>> [ 12.028719] Call Trace:
>> [ 12.038777] dma_direct_alloc_pages+0x171/0x2a0
>> [ 12.051185] dma_pool_alloc+0xd0/0x1c0
>> [ 12.062585] base_alloc_rdpq_dma_pool+0x118/0x1d0 [mpt3sas]
>> [ 12.076131] _base_allocate_memory_pools+0x2d6/0x1240 [mpt3sas]
>> [ 12.090232] mpt3sas_base_attach+0x4a4/0x930 [mpt3sas]
>> [ 12.103599] _scsih_probe+0x4e3/0x920 [mpt3sas]
>> [ 12.116383] local_pci_probe+0x42/0x90
>> [ 12.128401] work_for_cpu_fn+0x16/0x20
>> [ 12.140466] process_one_work+0x208/0x400
>> [ 12.152910] worker_thread+0x221/0x3e0
>> [ 12.165053] ? process_one_work+0x400/0x400
>> [ 12.177573] kthread+0x117/0x130
>> [ 12.188759] ? kthread_park+0x90/0x90
>> [ 12.200400] ret_from_fork+0x22/0x30
>> [ 12.211748] ---[ end trace 1d2f9a5394100a7e ]---
>> [ 12.224134] mpt2sas_cm0: mpt3sas_base_free_resources
>> [ 12.237582] mpt2sas_cm0: _base_make_ioc_ready
>> [ 12.249253] mpt2sas_cm0: mpt3sas_base_unmap_resources
>> [ 12.264417] igb 0000:07:00.1: added PHC on eth1
>> [ 12.276024] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
>> [ 12.290184] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:ea
>> [ 12.304604] igb 0000:07:00.1: eth1: PBA No: 100000-000
>> [ 12.316624] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx
>> queue(s), 8 tx queue(s)
>> [ 12.331505] mpt2sas_cm0: _base_release_memory_pools
>> [ 12.343209] mpt2sas_cm0: failure at
>> drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
>>
>> On Tue, Sep 29, 2020 at 8:00 AM Suganath Prabu Subramani
>> <suganath-prabu.subramani@broadcom.com> wrote:
>> >
>> > Hi Sundar,
>> >
>> > Please check if below two patches are available in the mpt3sas driver
>> > you are using.
>> > If you are seeing issues with these patches applied (Or) If your
>> > driver is already having mentioned patches, provide us driver log with
>> > "mpt3sas.logging_level=0x3f8”.
>> >
>> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=61e6ba03ea26f0205e535862009ff6ffdbf4de0c
>> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=f56577e8c7d0f3054f97d1f0d1cbe9a4d179cc47
>> >
>> > I could see these patches in 5.8.12
>> > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/scsi/mpt3sas/mpt3sas_base.c?h=v5.8.12.
>> >
>> > Thanks,
>> > Suganath
>> >
>> >
>> > On Tue, Sep 29, 2020 at 4:18 PM Sundar Nagarajan
>> > <sun.nagarajan@gmail.com> wrote:
>> > >
>> > > Sorry if I am mailing too many people.
>> > > Copying additional people in the hope that someone has the time to guide me on how to report, debug and fix this bug in the 5.8 kernel.
>> > >
>> > > bugzilla.kernel org bug report:
>> > > https://bugzilla.kernel.org/show_bug.cgi?id=209177
>> > >
>> > >
>> > >
>> > >
>> > > On Tue, Sep 22, 2020 at 7:08 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
>> > >>
>> > >> Any guidance on how I should go about trying with the 35.100.00.00 driver?
>> > >> In particular:
>> > >>
>> > >> Which patch do I apply?
>> > >> Which kernel version do I apply the patch to?
>> > >>
>> > >> Regards,
>> > >> Sundar
>> > >>
>> > >>
>> > >> On Thu, Sep 10, 2020 at 10:51 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
>> > >>>
>> > >>> Hi Suganath,
>> > >>>
>> > >>> Thank you for the quick reply.
>> > >>>
>> > >>> I am a bit of a newbie in pllying linux kernel patches etc.
>> > >>>
>> > >>> Would I apply this patch to the stock (5.8.8) kernel.org kernel:
>> > >>> https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/commit/?h=5.10/scsi-queue
>> > >>>
>> > >>> Sundar
>> > >>>
>> > >>>
>> > >>>
>> > >>> On Thu, Sep 10, 2020 at 10:46 PM Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> wrote:
>> > >>>>
>> > >>>> Hi Sundar,
>> > >>>>
>> > >>>> Can you please try with the latest driver 35.100.00.00. => "https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/tree/?h=5.10/scsi-queue"
>> > >>>> This has fixes related to "RDPQ" scsi: mpt3sas: Fix reply queue count in non RDPQ mode.
>> > >>>> scsi: mpt3sas: Fix memset() in non-RDPQ mode.
>> > >>>>
>> > >>>> Thanks,
>> > >>>> Suganath
>> > >>>>
>> > >>>> On Fri, Sep 11, 2020 at 10:00 AM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
>> > >>>>>
>> > >>>>> I am new to reporting linux kernel bugs.
>> > >>>>> Apologies if this is sent to you in error.
>> > >>>>> I got your email using: `perl scripts/get_maintainer.pl -f
>> > >>>>> drivers/scsi/mpt3sas/mpt3sas_scsih.c` as indicated in
>> > >>>>> https://www.kernel.org/doc/html/latest/admin-guide/reporting-bugs.html
>> > >>>>>
>> > >>>>> bugzilla.kernel org bug report:
>> > >>>>> https://bugzilla.kernel.org/show_bug.cgi?id=209177
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4202 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug 209177 - mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
2020-09-29 15:04 ` Suganath Prabu Subramani
@ 2020-09-29 20:04 ` Sundar Nagarajan
[not found] ` <CA+RiK65kPWbTHdKk_3qssEE75ZdihjiY8CMQc_T8f3c92DPDkg@mail.gmail.com>
0 siblings, 1 reply; 5+ messages in thread
From: Sundar Nagarajan @ 2020-09-29 20:04 UTC (permalink / raw)
To: Suganath Prabu Subramani
Cc: linux-scsi, Sathya Prakash Veerichetty, Sreekanth Reddy,
James E.J. Bottomley, Martin K. Petersen, PDL-MPT-FUSIONLINUX
[-- Attachment #1: Type: text/plain, Size: 14340 bytes --]
Thanks for your suggestions.
I downloaded and used stock kernel 5.8.12 from kernel.org.
The two patches you pointed at are already applied in 5.8.12 (as you
had indicated).
The problem still exists.
EDITED dmesg below, full dmesg output attached
I have also updated my kernel bugzilla report:
https://bugzilla.kernel.org/show_bug.cgi?id=209177
[ 10.110816] mpt2sas_cm0: mpt3sas_base_attach
[ 10.110913] dca service started, version 1.12.1
[ 10.122668] mpt2sas_cm0: mpt3sas_base_map_resources
[ 10.140735] usb 2-1.7: New USB device found, idVendor=1546,
idProduct=01a6, bcdDevice= 7.03
[ 10.147693] scsi host2: ahci
[ 10.163432] usb 2-1.7: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 10.173819] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED,
total mem (197972228 kB)
[ 10.189366] usb 2-1.7: Product: u-blox 6 - GPS Receiver
[ 10.206466] mpt2sas_cm0: _base_get_ioc_facts
[ 10.219986] usb 2-1.7: Manufacturer: u-blox AG - www.u-blox.com
[ 10.246805] mpt2sas_cm0: _base_wait_for_iocstate
[ 10.260177] scsi host3: ahci
[ 10.271074] scsi host4: ahci
[ 10.281958] scsi host5: ahci
[ 10.292565] scsi host6: ahci
[ 10.299138] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
[ 10.303153] scsi host7: ahci
[ 10.328158] ata1: SATA max UDMA/133 abar m2048@0xd1700000 port
0xd1700100 irq 53
[ 10.343989] ata2: SATA max UDMA/133 abar m2048@0xd1700000 port
0xd1700180 irq 53
[ 10.359546] ata3: SATA max UDMA/133 abar m2048@0xd1700000 port
0xd1700200 irq 53
[ 10.374807] ata4: SATA max UDMA/133 abar m2048@0xd1700000 port
0xd1700280 irq 53
[ 10.389813] ata5: SATA max UDMA/133 abar m2048@0xd1700000 port
0xd1700300 irq 53
[ 10.404635] ata6: SATA max UDMA/133 abar m2048@0xd1700000 port
0xd1700380 irq 53
[ 10.412371] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit
1.00 PQ: 0 ANSI: 6
[ 10.433718] usb 2-1.8: New USB device found, idVendor=051d,
idProduct=0003, bcdDevice= 1.06
[ 10.435546] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.450887] usb 2-1.8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 10.464152] offset:data
[ 10.478544] usb 2-1.8: Product: Smart-UPS 2200 FW:UPS 06.3 / MCU 11.0
[ 10.488004] mpt2sas_cm0: [0x00]:03100200
[ 10.488004] mpt2sas_cm0: [0x04]:00002300
[ 10.488005] mpt2sas_cm0: [0x08]:00000000
[ 10.488005] mpt2sas_cm0: [0x0c]:00000000
[ 10.488006] mpt2sas_cm0: [0x10]:00000000
[ 10.488007] mpt2sas_cm0: [0x14]:00010080
[ 10.488007] mpt2sas_cm0: [0x18]:22137ec7
[ 10.488008] mpt2sas_cm0: [0x1c]:0001285c
[ 10.488017] mpt2sas_cm0: [0x20]:14000600
[ 10.501945] usb 2-1.8: Manufacturer: American Power Conversion
[ 10.501961] usb 2-1.8: SerialNumber: JS1051006712
[ 10.513140] mpt2sas_cm0: [0x24]:00000020
[ 10.513140] mpt2sas_cm0: [0x28]:04000020
[ 10.513141] mpt2sas_cm0: [0x2c]:00810080
[ 10.513141] mpt2sas_cm0: [0x30]:007f0003
[ 10.513142] mpt2sas_cm0: [0x34]:0020ffe0
[ 10.513154] mpt2sas_cm0: [0x38]:008004b0
[ 10.513154] mpt2sas_cm0: [0x3c]:00000011
[ 10.513155] mpt2sas_cm0: [0x40]:00000000
[ 10.513156] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default
host page size to 4k
[ 10.524350] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks:
(15.4 GB/14.3 GiB)
[ 10.535178] mpt2sas_cm0: CurrentHostPageSize(0)
[ 10.548205] sd 0:0:0:0: [sda] Write Protect is off
[ 10.556610] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
[ 10.566972] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 10.577132] mpt2sas_cm0: request frame size(128), reply frame size(128)
[ 10.589074] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 10.597175] mpt2sas_cm0: msix is supported, vector_count(1)
[ 10.692084] hid: raw HID events driver (C) Jiri Kosina
[ 10.692148] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 10.692149] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 10.705215] mpt2sas_cm0: MSI-X vectors supported: 1
[ 10.705216] no of cores: 32, max_msix_vectors: -1
[ 10.705217] mpt2sas_cm0: 0 1
[ 10.705359] mpt2sas_cm0: High IOPs queues : disabled
[ 10.757534] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.761609] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 56
[ 10.761611] mpt2sas_cm0: iomem(0x00000000d1380000),
mapped(0x(____ptrval____)), size(16384)
[ 10.761613] mpt2sas_cm0: ioport(0x0000000000002000), size(256)
[ 10.781648] ata1: SATA link down (SStatus 0 SControl 300)
[ 10.793026] mpt2sas_cm0: _base_get_ioc_facts
[ 10.804281] ata6: SATA link down (SStatus 0 SControl 300)
[ 10.817492] mpt2sas_cm0: _base_wait_for_iocstate
[ 10.821742] usbcore: registered new interface driver usbhid
[ 10.821743] usbhid: USB HID core driver
[ 10.829361] ata3: SATA link down (SStatus 0 SControl 300)
[ 10.906674] offset:data
[ 10.917639] ata5: SATA link down (SStatus 0 SControl 300)
[ 10.917791] input: American Megatrends Inc. Virtual Keyboard and
Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046B:FF10.0001/input/input2
[ 10.917893] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID
v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse]
on usb-0000:00:1d.0-1.4/input0
[ 10.918019] input: American Megatrends Inc. Virtual Keyboard and
Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046B:FF10.0002/input/input3
[ 10.918245] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID
v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1d.0-1.4/input1
[ 10.918692] hid-generic 0003:051D:0003.0003: hiddev0,hidraw2: USB
HID v1.00 Device [American Power Conversion Smart-UPS 2200 FW:UPS 06.3
/ MCU 11.0] on usb-0000:00:1d.0-1.8/input0
[ 10.925117] random: fast init done
[ 10.929067] mpt2sas_cm0: [0x00]:03100200
[ 10.939600] ata2: SATA link down (SStatus 0 SControl 300)
[ 10.951294] mpt2sas_cm0: [0x04]:00002300
[ 10.984639] sda: sda1 sda2 sda3
[ 10.985180] mpt2sas_cm0: [0x08]:00000000
[ 11.005873] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 11.006343] mpt2sas_cm0: [0x0c]:00000000
[ 11.285853] mpt2sas_cm0: [0x10]:00000000
[ 11.298311] mpt2sas_cm0: [0x14]:00010080
[ 11.310617] mpt2sas_cm0: [0x18]:22137ec7
[ 11.322831] mpt2sas_cm0: [0x1c]:0001285c
[ 11.334964] mpt2sas_cm0: [0x20]:14000600
[ 11.347072] mpt2sas_cm0: [0x24]:00000020
[ 11.359060] mpt2sas_cm0: [0x28]:04000020
[ 11.370880] mpt2sas_cm0: [0x2c]:00810080
[ 11.382482] mpt2sas_cm0: [0x30]:007f0003
[ 11.393927] mpt2sas_cm0: [0x34]:0020ffe0
[ 11.405226] mpt2sas_cm0: [0x38]:008004b0
[ 11.416400] mpt2sas_cm0: [0x3c]:00000011
[ 11.427427] mpt2sas_cm0: [0x40]:00000000
[ 11.438335] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default
host page size to 4k
[ 11.453888] mpt2sas_cm0: CurrentHostPageSize(0)
[ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
[ 11.479358] mpt2sas_cm0: request frame size(128), reply frame size(128)
[ 11.493291] mpt2sas_cm0: _base_make_ioc_ready
[ 11.507135] mpt2sas_cm0: _base_get_port_facts
[ 11.519349] igb 0000:07:00.0: added PHC on eth0
[ 11.530468] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 11.544129] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:e9
[ 11.558034] igb 0000:07:00.0: eth0: PBA No: 100000-000
[ 11.569355] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx
queue(s), 8 tx queue(s)
[ 11.616691] offset:data
[ 11.624765] mpt2sas_cm0: [0x00]:05070000
[ 11.634321] mpt2sas_cm0: [0x04]:00000000
[ 11.643579] mpt2sas_cm0: [0x08]:00000000
[ 11.652537] mpt2sas_cm0: [0x0c]:00000000
[ 11.661248] mpt2sas_cm0: [0x10]:00000000
[ 11.669892] mpt2sas_cm0: [0x14]:00003000
[ 11.678382] mpt2sas_cm0: [0x18]:00000100
[ 11.686741] mpt2sas_cm0: _base_allocate_memory_pools
[ 11.696171] mpt2sas_cm0: scatter gather: sge_in_main_msg(1),
sge_per_chain(9), sge_per_io(128), chains_per_io(15)
[ 11.715890] ------------[ cut here ]------------
[ 11.725227] WARNING: CPU: 0 PID: 5 at mm/page_alloc.c:4831
__alloc_pages_nodemask+0x1ce/0x310
[ 11.739330] Modules linked in: fjes(-) hid_generic usbhid hid
crct10dif_pclmul igb(+) crc32_pclmul ghash_clmulni_intel dca
aesni_intel ptp ahci crypto_simd mpt3sas(+) pps_core xhci_pci cryptd
mlx4_core(+) raid_class i2c_algo_bit libahci xhci_pci_renesas
glue_helper scsi_transport_sas wmi uas usb_storage deflate
[ 11.791023] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.8.12 #1
[ 11.803622] Hardware name: ZTSYSTEM CYPRESS11 /S2600CP ,
BIOS SE5C600.86B.02.06.0006.032420170950 03/24/2017
[ 11.827610] Workqueue: events work_for_cpu_fn
[ 11.838884] RIP: 0010:__alloc_pages_nodemask+0x1ce/0x310
[ 11.851367] Code: ff ff ff 65 48 8b 04 25 c0 7b 01 00 48 05 78 08
00 00 41 bd 01 00 00 00 48 89 44 24 08 e9 05 ff ff ff 81 e7 00 20 00
00 75 02 <0f> 0b 45 31 ed eb 95 44 8b 64 24 18 65 8b 05 1f a6 7a 4b 89
c0 48
[ 11.893686] RSP: 0018:ffffc18e000bbc98 EFLAGS: 00010246
[ 11.906822] RAX: 0000000000000000 RBX: 0000000000000cc0 RCX: 0000000000000000
[ 11.922228] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
[ 11.937510] RBP: 000000000075d000 R08: 000000000075d000 R09: ffffffffffffffff
[ 11.952755] R10: 0000000000000000 R11: ffff9e6a16c22350 R12: ffffffffffffffff
[ 11.967942] R13: 0000000000000000 R14: ffff9e5215c34f58 R15: ffff9e52163590b0
[ 11.983165] FS: 0000000000000000(0000) GS:ffff9e521ea00000(0000)
knlGS:0000000000000000
[ 11.999566] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 12.013320] CR2: 000055c7853e9ef0 CR3: 00000003d620a003 CR4: 00000000000606f0
[ 12.028719] Call Trace:
[ 12.038777] dma_direct_alloc_pages+0x171/0x2a0
[ 12.051185] dma_pool_alloc+0xd0/0x1c0
[ 12.062585] base_alloc_rdpq_dma_pool+0x118/0x1d0 [mpt3sas]
[ 12.076131] _base_allocate_memory_pools+0x2d6/0x1240 [mpt3sas]
[ 12.090232] mpt3sas_base_attach+0x4a4/0x930 [mpt3sas]
[ 12.103599] _scsih_probe+0x4e3/0x920 [mpt3sas]
[ 12.116383] local_pci_probe+0x42/0x90
[ 12.128401] work_for_cpu_fn+0x16/0x20
[ 12.140466] process_one_work+0x208/0x400
[ 12.152910] worker_thread+0x221/0x3e0
[ 12.165053] ? process_one_work+0x400/0x400
[ 12.177573] kthread+0x117/0x130
[ 12.188759] ? kthread_park+0x90/0x90
[ 12.200400] ret_from_fork+0x22/0x30
[ 12.211748] ---[ end trace 1d2f9a5394100a7e ]---
[ 12.224134] mpt2sas_cm0: mpt3sas_base_free_resources
[ 12.237582] mpt2sas_cm0: _base_make_ioc_ready
[ 12.249253] mpt2sas_cm0: mpt3sas_base_unmap_resources
[ 12.264417] igb 0000:07:00.1: added PHC on eth1
[ 12.276024] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 12.290184] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:ea
[ 12.304604] igb 0000:07:00.1: eth1: PBA No: 100000-000
[ 12.316624] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx
queue(s), 8 tx queue(s)
[ 12.331505] mpt2sas_cm0: _base_release_memory_pools
[ 12.343209] mpt2sas_cm0: failure at
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
On Tue, Sep 29, 2020 at 8:00 AM Suganath Prabu Subramani
<suganath-prabu.subramani@broadcom.com> wrote:
>
> Hi Sundar,
>
> Please check if below two patches are available in the mpt3sas driver
> you are using.
> If you are seeing issues with these patches applied (Or) If your
> driver is already having mentioned patches, provide us driver log with
> "mpt3sas.logging_level=0x3f8”.
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=61e6ba03ea26f0205e535862009ff6ffdbf4de0c
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=f56577e8c7d0f3054f97d1f0d1cbe9a4d179cc47
>
> I could see these patches in 5.8.12
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/scsi/mpt3sas/mpt3sas_base.c?h=v5.8.12.
>
> Thanks,
> Suganath
>
>
> On Tue, Sep 29, 2020 at 4:18 PM Sundar Nagarajan
> <sun.nagarajan@gmail.com> wrote:
> >
> > Sorry if I am mailing too many people.
> > Copying additional people in the hope that someone has the time to guide me on how to report, debug and fix this bug in the 5.8 kernel.
> >
> > bugzilla.kernel org bug report:
> > https://bugzilla.kernel.org/show_bug.cgi?id=209177
> >
> >
> >
> >
> > On Tue, Sep 22, 2020 at 7:08 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
> >>
> >> Any guidance on how I should go about trying with the 35.100.00.00 driver?
> >> In particular:
> >>
> >> Which patch do I apply?
> >> Which kernel version do I apply the patch to?
> >>
> >> Regards,
> >> Sundar
> >>
> >>
> >> On Thu, Sep 10, 2020 at 10:51 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
> >>>
> >>> Hi Suganath,
> >>>
> >>> Thank you for the quick reply.
> >>>
> >>> I am a bit of a newbie in pllying linux kernel patches etc.
> >>>
> >>> Would I apply this patch to the stock (5.8.8) kernel.org kernel:
> >>> https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/commit/?h=5.10/scsi-queue
> >>>
> >>> Sundar
> >>>
> >>>
> >>>
> >>> On Thu, Sep 10, 2020 at 10:46 PM Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> wrote:
> >>>>
> >>>> Hi Sundar,
> >>>>
> >>>> Can you please try with the latest driver 35.100.00.00. => "https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/tree/?h=5.10/scsi-queue"
> >>>> This has fixes related to "RDPQ" scsi: mpt3sas: Fix reply queue count in non RDPQ mode.
> >>>> scsi: mpt3sas: Fix memset() in non-RDPQ mode.
> >>>>
> >>>> Thanks,
> >>>> Suganath
> >>>>
> >>>> On Fri, Sep 11, 2020 at 10:00 AM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
> >>>>>
> >>>>> I am new to reporting linux kernel bugs.
> >>>>> Apologies if this is sent to you in error.
> >>>>> I got your email using: `perl scripts/get_maintainer.pl -f
> >>>>> drivers/scsi/mpt3sas/mpt3sas_scsih.c` as indicated in
> >>>>> https://www.kernel.org/doc/html/latest/admin-guide/reporting-bugs.html
> >>>>>
> >>>>> bugzilla.kernel org bug report:
> >>>>> https://bugzilla.kernel.org/show_bug.cgi?id=209177
[-- Attachment #2: dmesg.20200929-5.8.12 --]
[-- Type: application/octet-stream, Size: 93586 bytes --]
[ 0.000000] Linux version 5.8.12 (sundar@smaug) (gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, GNU ld (GNU Binutils for Ubuntu) 2.30) #1 SMP Tue Sep 29 12:04:04 PDT 2020
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.12 root=/dev/mapper/fili0-rootfs ro console=ttyS0,115200n1 console=tty0 mpt3sas.logging_level=0x3f8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bad33fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad34000-0x00000000baf84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baf85000-0x00000000bafb6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bafb7000-0x00000000bafcbfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bafcc000-0x00000000bb3d3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb3d4000-0x00000000bb483fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bb484000-0x00000000bdd2efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdd2f000-0x00000000bddccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bddcd000-0x00000000bdea0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdea1000-0x00000000bdf2efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdf2f000-0x00000000bdfa9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdfaa000-0x00000000bdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000303fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
BIOS ID: SE5C600.86B.02.06.0006.201703240950
[ 0.000000] efi: ACPI 2.0=0xbdfa9f98 SMBIOS=0xf0440
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: ZTSYSTEM CYPRESS11 /S2600CP , BIOS SE5C600.86B.02.06.0006.032420170950 03/24/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.613 MHz processor
[ 0.000838] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000840] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000847] last_pfn = 0x3040000 max_arch_pfn = 0x400000000
[ 0.000852] MTRR default type: uncachable
[ 0.000853] MTRR fixed ranges enabled:
[ 0.000854] 00000-9FFFF write-back
[ 0.000855] A0000-BFFFF uncachable
[ 0.000856] C0000-DFFFF write-through
[ 0.000857] E0000-FFFFF write-protect
[ 0.000857] MTRR variable ranges enabled:
[ 0.000859] 0 base 000000000000 mask 3FFF80000000 write-back
[ 0.000860] 1 base 000080000000 mask 3FFFC0000000 write-back
[ 0.000861] 2 base 000100000000 mask 3FFF00000000 write-back
[ 0.000862] 3 base 000200000000 mask 3FFE00000000 write-back
[ 0.000863] 4 base 000400000000 mask 3FFC00000000 write-back
[ 0.000864] 5 base 000800000000 mask 3FF800000000 write-back
[ 0.000865] 6 base 001000000000 mask 3FF000000000 write-back
[ 0.000866] 7 base 002000000000 mask 3FF000000000 write-back
[ 0.000867] 8 base 003000000000 mask 3FFFC0000000 write-back
[ 0.000867] 9 disabled
[ 0.001420] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002134] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.002138] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.014475] found SMP MP-table at [mem 0x000fd300-0x000fd30f]
[ 0.014505] check: Scanning 1 areas for low memory corruption
[ 0.014511] Using GB pages for direct mapping
[ 0.014846] Secure boot could not be determined
[ 0.014848] RAMDISK: [mem 0x307b6000-0x343d2fff]
[ 0.014853] ACPI: Early table checksum verification disabled
[ 0.014856] ACPI: RSDP 0x00000000BDFA9F98 000024 (v02 INTEL )
[ 0.014859] ACPI: XSDT 0x00000000BDFA7D98 0000CC (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014865] ACPI: FACP 0x00000000BDFA7918 0000F4 (v04 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014870] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20200528/tbfadt-674)
[ 0.014874] ACPI: DSDT 0x00000000BDF91018 0146C3 (v02 INTEL S2600CP 00000006 INTL 20100331)
[ 0.014878] ACPI: FACS 0x00000000BDFA7F40 000040
[ 0.014881] ACPI: APIC 0x00000000BDFA6018 000BAA (v03 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014885] ACPI: SPMI 0x00000000BDFA9A98 000041 (v05 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014888] ACPI: FPDT 0x00000000BDFA9A18 000044 (v01 INTEL S2600CP 00000000 00000000)
[ 0.014892] ACPI: MCFG 0x00000000BDFA9F18 00003C (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014895] ACPI: WDDT 0x00000000BDFA9E98 000040 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014898] ACPI: SRAT 0x00000000BDF8EC18 0002A8 (v03 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014902] ACPI: SLIT 0x00000000BDFA9E18 000030 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014905] ACPI: MSCT 0x00000000BDFA8E18 000090 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014909] ACPI: HPET 0x00000000BDFA9D98 000038 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014912] ACPI: SSDT 0x00000000BDFA9C98 00002B (v02 INTEL S2600CP 00001000 INTL 20100331)
[ 0.014916] ACPI: SSDT 0x00000000BDDCD018 0D30C8 (v02 INTEL S2600CP 00004000 INTL 20100331)
[ 0.014919] ACPI: DMAR 0x00000000BDFA7618 000118 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014922] ACPI: SPCR 0x00000000BDFA9D18 000050 (v01 INTEL S2600CP 06222004 INTL 20090903)
[ 0.014926] ACPI: HEST 0x00000000BDF90F18 0000A8 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.014929] ACPI: BERT 0x00000000BDFA9B98 000030 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.014933] ACPI: ERST 0x00000000BDF90C98 000230 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.014936] ACPI: EINJ 0x00000000BDFA7C18 000130 (v01 INTEL S2600CP 00000001 INTL 00000001)
[ 0.014939] ACPI: SSDT 0x00000000BDF8C018 001729 (v02 INTEL S2600CP 00000002 INTL 20100331)
[ 0.014943] ACPI: SSDT 0x00000000BDFA9C18 000045 (v02 INTEL S2600CP 00000001 INTL 20100331)
[ 0.014946] ACPI: SSDT 0x00000000BDF8FE18 000181 (v02 INTEL S2600CP 00000003 INTL 20100331)
[ 0.014955] ACPI: Local APIC address 0xfee00000
[ 0.014982] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.014983] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.014984] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.014985] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.014986] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.014987] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.014988] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.014988] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.014989] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.014990] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.014991] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.014992] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ 0.014993] SRAT: PXM 0 -> APIC 0x0c -> Node 0
[ 0.014994] SRAT: PXM 0 -> APIC 0x0d -> Node 0
[ 0.014995] SRAT: PXM 0 -> APIC 0x0e -> Node 0
[ 0.014996] SRAT: PXM 0 -> APIC 0x0f -> Node 0
[ 0.014997] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.014998] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ 0.014999] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.015000] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ 0.015001] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ 0.015002] SRAT: PXM 1 -> APIC 0x25 -> Node 1
[ 0.015003] SRAT: PXM 1 -> APIC 0x26 -> Node 1
[ 0.015004] SRAT: PXM 1 -> APIC 0x27 -> Node 1
[ 0.015005] SRAT: PXM 1 -> APIC 0x28 -> Node 1
[ 0.015006] SRAT: PXM 1 -> APIC 0x29 -> Node 1
[ 0.015007] SRAT: PXM 1 -> APIC 0x2a -> Node 1
[ 0.015008] SRAT: PXM 1 -> APIC 0x2b -> Node 1
[ 0.015009] SRAT: PXM 1 -> APIC 0x2c -> Node 1
[ 0.015009] SRAT: PXM 1 -> APIC 0x2d -> Node 1
[ 0.015010] SRAT: PXM 1 -> APIC 0x2e -> Node 1
[ 0.015011] SRAT: PXM 1 -> APIC 0x2f -> Node 1
[ 0.015015] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff]
[ 0.015016] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x183fffffff]
[ 0.015017] ACPI: SRAT: Node 1 PXM 1 [mem 0x1840000000-0x303fffffff]
[ 0.015033] NUMA: Initialized distance table, cnt=2
[ 0.015036] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x183fffffff] -> [mem 0x00000000-0x183fffffff]
[ 0.015041] NODE_DATA(0) allocated [mem 0x183fffb000-0x183fffffff]
[ 0.015046] NODE_DATA(1) allocated [mem 0x303fffa000-0x303fffefff]
[ 0.015286] Zone ranges:
[ 0.015288] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015289] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015291] Normal [mem 0x0000000100000000-0x000000303fffffff]
[ 0.015292] Device empty
[ 0.015294] Movable zone start for each node
[ 0.015295] Early memory node ranges
[ 0.015296] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.015298] node 0: [mem 0x0000000000100000-0x00000000bad33fff]
[ 0.015299] node 0: [mem 0x00000000baf85000-0x00000000bafb6fff]
[ 0.015300] node 0: [mem 0x00000000bafcc000-0x00000000bb3d3fff]
[ 0.015301] node 0: [mem 0x00000000bdfaa000-0x00000000bdffffff]
[ 0.015302] node 0: [mem 0x0000000100000000-0x000000183fffffff]
[ 0.015311] node 1: [mem 0x0000001840000000-0x000000303fffffff]
[ 0.015588] Zeroed struct page in unavailable ranges: 20125 pages
[ 0.015590] Initmem setup node 0 [mem 0x0000000000001000-0x000000183fffffff]
[ 0.015592] On node 0 totalpages: 25145699
[ 0.015593] DMA zone: 64 pages used for memmap
[ 0.015594] DMA zone: 26 pages reserved
[ 0.015595] DMA zone: 3999 pages, LIFO batch:0
[ 0.015633] DMA32 zone: 11912 pages used for memmap
[ 0.015633] DMA32 zone: 762308 pages, LIFO batch:63
[ 0.023604] Normal zone: 380928 pages used for memmap
[ 0.023606] Normal zone: 24379392 pages, LIFO batch:63
[ 0.312560] Initmem setup node 1 [mem 0x0000001840000000-0x000000303fffffff]
[ 0.312567] On node 1 totalpages: 25165824
[ 0.312569] Normal zone: 393216 pages used for memmap
[ 0.312570] Normal zone: 25165824 pages, LIFO batch:63
[ 0.645396] ACPI: PM-Timer IO Port: 0x408
[ 0.645401] ACPI: Local APIC address 0xfee00000
[ 0.645424] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.645437] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.645441] IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 24-47
[ 0.645446] IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 48-71
[ 0.645451] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.645454] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.645455] ACPI: IRQ0 used by override.
[ 0.645456] ACPI: IRQ9 used by override.
[ 0.645460] Using ACPI (MADT) for SMP configuration information
[ 0.645462] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.645468] ACPI: SPCR: SPCR table version 1
[ 0.645470] ACPI: SPCR: console: uart,io,0x3f8,115200
[ 0.645473] TSC deadline timer available
[ 0.645475] smpboot: Allowing 152 CPUs, 120 hotplug CPUs
[ 0.645512] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.645515] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.645517] PM: hibernation: Registered nosave memory: [mem 0xbad34000-0xbaf84fff]
[ 0.645520] PM: hibernation: Registered nosave memory: [mem 0xbafb7000-0xbafcbfff]
[ 0.645522] PM: hibernation: Registered nosave memory: [mem 0xbb3d4000-0xbb483fff]
[ 0.645523] PM: hibernation: Registered nosave memory: [mem 0xbb484000-0xbdd2efff]
[ 0.645524] PM: hibernation: Registered nosave memory: [mem 0xbdd2f000-0xbddccfff]
[ 0.645525] PM: hibernation: Registered nosave memory: [mem 0xbddcd000-0xbdea0fff]
[ 0.645526] PM: hibernation: Registered nosave memory: [mem 0xbdea1000-0xbdf2efff]
[ 0.645527] PM: hibernation: Registered nosave memory: [mem 0xbdf2f000-0xbdfa9fff]
[ 0.645530] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xcfffffff]
[ 0.645531] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[ 0.645532] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.645533] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed18fff]
[ 0.645534] PM: hibernation: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[ 0.645535] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.645536] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.645537] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.645538] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.645539] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffa1ffff]
[ 0.645540] PM: hibernation: Registered nosave memory: [mem 0xffa20000-0xffffffff]
[ 0.645543] [mem 0xd0000000-0xfebfffff] available for PCI devices
[ 0.645545] Booting paravirtualized kernel on bare hardware
[ 0.645549] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.652360] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:152 nr_node_ids:2
[ 0.666132] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u262144
[ 0.666153] pcpu-alloc: s185240 r8192 d31848 u262144 alloc=1*2097152
[ 0.666154] pcpu-alloc: [0] 000 001 002 003 004 005 006 007
[ 0.666157] pcpu-alloc: [0] 016 017 018 019 020 021 022 023
[ 0.666159] pcpu-alloc: [0] 032 034 036 038 040 042 044 046
[ 0.666162] pcpu-alloc: [0] 048 050 052 054 056 058 060 062
[ 0.666164] pcpu-alloc: [0] 064 066 068 070 072 074 076 078
[ 0.666166] pcpu-alloc: [0] 080 082 084 086 088 090 092 094
[ 0.666168] pcpu-alloc: [0] 096 098 100 102 104 106 108 110
[ 0.666171] pcpu-alloc: [0] 112 114 116 118 120 122 124 126
[ 0.666173] pcpu-alloc: [0] 128 130 132 134 136 138 140 142
[ 0.666176] pcpu-alloc: [0] 144 146 148 150 --- --- --- ---
[ 0.666178] pcpu-alloc: [1] 008 009 010 011 012 013 014 015
[ 0.666181] pcpu-alloc: [1] 024 025 026 027 028 029 030 031
[ 0.666183] pcpu-alloc: [1] 033 035 037 039 041 043 045 047
[ 0.666186] pcpu-alloc: [1] 049 051 053 055 057 059 061 063
[ 0.666188] pcpu-alloc: [1] 065 067 069 071 073 075 077 079
[ 0.666190] pcpu-alloc: [1] 081 083 085 087 089 091 093 095
[ 0.666193] pcpu-alloc: [1] 097 099 101 103 105 107 109 111
[ 0.666195] pcpu-alloc: [1] 113 115 117 119 121 123 125 127
[ 0.666198] pcpu-alloc: [1] 129 131 133 135 137 139 141 143
[ 0.666200] pcpu-alloc: [1] 145 147 149 151 --- --- --- ---
[ 0.666282] Built 2 zonelists, mobility grouping on. Total pages: 49525377
[ 0.666283] Policy zone: Normal
[ 0.666286] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.12 root=/dev/mapper/fili0-rootfs ro console=ttyS0,115200n1 console=tty0 mpt3sas.logging_level=0x3f8
[ 0.666416] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.666417] printk: log_buf_len total cpu_extra contributions: 618496 bytes
[ 0.666419] printk: log_buf_len min size: 262144 bytes
[ 0.666665] printk: log_buf_len: 1048576 bytes
[ 0.666667] printk: early log buf free: 245608(93%)
[ 0.669874] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 1.505560] Memory: 197824176K/201246092K available (14339K kernel code, 1690K rwdata, 4572K rodata, 1760K init, 2644K bss, 3421916K reserved, 0K cma-reserved)
[ 1.506322] random: get_random_u64 called from cache_random_seq_create+0x80/0x160 with crng_init=0
[ 1.506725] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=152, Nodes=2
[ 1.506806] Kernel/User page tables isolation: enabled
[ 1.507003] ftrace: allocating 43375 entries in 170 pages
[ 1.526558] ftrace: allocated 170 pages with 4 groups
[ 1.527804] rcu: Hierarchical RCU implementation.
[ 1.527806] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=152.
[ 1.527808] Trampoline variant of Tasks RCU enabled.
[ 1.527809] Rude variant of Tasks RCU enabled.
[ 1.527810] Tracing variant of Tasks RCU enabled.
[ 1.527811] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 1.527812] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=152
[ 1.532484] NR_IRQS: 33024, nr_irqs: 2456, preallocated irqs: 16
[ 1.533252] Console: colour dummy device 80x25
[ 1.533589] printk: console [tty0] enabled
[ 2.930163] printk: console [ttyS0] enabled
[ 2.935081] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 2.947606] ACPI: Core revision 20200528
[ 2.953086] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 2.963298] APIC: Switch to symmetric I/O mode setup
[ 2.968859] DMAR: Host address width 46
[ 2.973145] DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
[ 2.979111] DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020ff
[ 2.987956] DMAR: DRHD base: 0x000000ebffc000 flags: 0x1
[ 2.993895] DMAR: dmar1: reg_base_addr ebffc000 ver 1:0 cap d2078c106f0462 ecap f020ff
[ 3.002739] DMAR: RMRR base: 0x000000bdd05000 end: 0x000000bdd29fff
[ 3.009745] DMAR: ATSR flags: 0x0
[ 3.013452] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffe000 IOMMU 0
[ 3.020556] DMAR-IR: IOAPIC id 0 under DRHD base 0xebffc000 IOMMU 1
[ 3.027653] DMAR-IR: IOAPIC id 1 under DRHD base 0xebffc000 IOMMU 1
[ 3.034781] DMAR-IR: HPET id 0 under DRHD base 0xebffc000
[ 3.040815] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 3.051076] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 3.057104] x2apic enabled
[ 3.060135] Switched APIC routing to cluster x2apic.
[ 3.066386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 3.091341] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa2522a3a9, max_idle_ns: 440795302516 ns
[ 3.103104] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.22 BogoMIPS (lpj=8778452)
[ 3.107103] pid_max: default: 155648 minimum: 1216
[ 3.121246] LSM: Security Framework initializing
[ 3.152862] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes, vmalloc)
[ 3.171444] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
[ 3.175627] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[ 3.179518] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[ 3.184211] mce: CPU0: Thermal monitoring enabled (TM1)
[ 3.187147] process: using mwait in idle threads
[ 3.191114] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 3.195103] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 3.199112] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 3.203106] Spectre V2 : Mitigation: Full generic retpoline
[ 3.207103] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 3.211103] Speculative Store Bypass: Vulnerable
[ 3.215106] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 3.219291] Freeing SMP alternatives memory: 40K
[ 3.227346] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz (family: 0x6, model: 0x2d, stepping: 0x7)
[ 3.231452] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 3.235118] ... version: 3
[ 3.239103] ... bit width: 48
[ 3.243115] ... generic registers: 4
[ 3.247103] ... value mask: 0000ffffffffffff
[ 3.251103] ... max period: 00007fffffffffff
[ 3.255103] ... fixed-purpose events: 3
[ 3.259103] ... event mask: 000000070000000f
[ 3.263273] rcu: Hierarchical SRCU implementation.
[ 3.281047] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 3.285788] smp: Bringing up secondary CPUs ...
[ 3.287285] x86: Booting SMP configuration:
[ 3.291124] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 3.315107] .... node #1, CPUs: #8
[ 1.490147] smpboot: CPU 8 Converting physical 0 to logical die 1
[ 3.411323] #9 #10 #11 #12 #13 #14 #15
[ 3.443105] .... node #0, CPUs: #16
[ 3.446454] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 3.451339] #17 #18 #19 #20 #21 #22 #23
[ 3.475117] .... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
[ 3.507382] smp: Brought up 2 nodes, 32 CPUs
[ 3.515106] smpboot: Max logical packages: 10
[ 3.519106] smpboot: Total of 32 processors activated (140707.68 BogoMIPS)
[ 3.538061] devtmpfs: initialized
[ 3.539185] x86/mm: Memory block size: 1024MB
[ 3.545671] PM: Registering ACPI NVS region [mem 0xbdd2f000-0xbddccfff] (647168 bytes)
[ 3.547128] PM: Registering ACPI NVS region [mem 0xbdea1000-0xbdf2efff] (581632 bytes)
[ 3.551349] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 3.555325] futex hash table entries: 65536 (order: 10, 4194304 bytes, vmalloc)
[ 3.560298] pinctrl core: initialized pinctrl subsystem
[ 3.563307] PM: RTC time: 19:32:48, date: 2020-09-29
[ 3.567107] thermal_sys: Registered thermal governor 'fair_share'
[ 3.567108] thermal_sys: Registered thermal governor 'bang_bang'
[ 3.571104] thermal_sys: Registered thermal governor 'step_wise'
[ 3.575104] thermal_sys: Registered thermal governor 'user_space'
[ 3.579531] NET: Registered protocol family 16
[ 3.587276] audit: initializing netlink subsys (disabled)
[ 3.591134] audit: type=2000 audit(1601407966.572:1): state=initialized audit_enabled=0 res=1
[ 3.599121] cpuidle: using governor ladder
[ 3.603119] cpuidle: using governor menu
[ 3.607223] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 3.611104] ACPI: bus type PCI registered
[ 3.615118] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.619343] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 3.623121] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 3.627147] PCI: Using configuration type 1 for base access
[ 3.631168] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 3.639816] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 3.643108] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 3.647464] ACPI: Added _OSI(Module Device)
[ 3.651108] ACPI: Added _OSI(Processor Device)
[ 3.655125] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.659104] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.663125] ACPI: Added _OSI(Linux-Dell-Video)
[ 3.667104] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 3.671114] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 3.804219] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 3.825219] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 3.841065] ACPI: Interpreter enabled
[ 3.843129] ACPI: (supports S0 S1 S3 S5)
[ 3.847104] ACPI: Using IOAPIC for interrupt routing
[ 3.851201] HEST: Table parsing has been initialized.
[ 3.855131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.859918] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 3.894075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 3.895110] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 3.899416] acpi PNP0A08:00: _OSC: platform does not support [AER LTR]
[ 3.903341] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 3.907104] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 3.911259] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0xbfff]; [io 0x0000-0xbfff window] ignored
[ 3.915367] PCI host bridge to bus 0000:00
[ 3.919115] pci_bus 0000:00: root bus resource [io 0x0000-0xbfff]
[ 3.923104] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.927104] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 3.931104] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 3.935104] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 3.939104] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 3.943104] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 3.947104] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 3.951104] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 3.955105] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 3.959104] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 3.963104] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 3.967104] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 3.971104] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 3.975104] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 3.979105] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xebffffff window]
[ 3.983109] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x38007fffffff window]
[ 3.987105] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 3.991119] pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
[ 3.995190] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.999232] pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
[ 4.003205] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 4.007285] pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
[ 4.011202] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 4.015270] pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
[ 4.019201] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 4.023280] pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
[ 4.027149] pci 0000:00:03.0: enabling Extended Tags
[ 4.031159] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 4.035277] pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
[ 4.039200] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 4.043291] pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
[ 4.047132] pci 0000:00:04.0: reg 0x10: [mem 0x38007ff80000-0x38007ff83fff 64bit]
[ 4.051264] pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
[ 4.055121] pci 0000:00:04.1: reg 0x10: [mem 0x38007ff70000-0x38007ff73fff 64bit]
[ 4.059292] pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
[ 4.063121] pci 0000:00:04.2: reg 0x10: [mem 0x38007ff60000-0x38007ff63fff 64bit]
[ 4.067262] pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
[ 4.071120] pci 0000:00:04.3: reg 0x10: [mem 0x38007ff50000-0x38007ff53fff 64bit]
[ 4.075263] pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
[ 4.079120] pci 0000:00:04.4: reg 0x10: [mem 0x38007ff40000-0x38007ff43fff 64bit]
[ 4.083274] pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
[ 4.087120] pci 0000:00:04.5: reg 0x10: [mem 0x38007ff30000-0x38007ff33fff 64bit]
[ 4.091272] pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
[ 4.095124] pci 0000:00:04.6: reg 0x10: [mem 0x38007ff20000-0x38007ff23fff 64bit]
[ 4.099267] pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
[ 4.103121] pci 0000:00:04.7: reg 0x10: [mem 0x38007ff10000-0x38007ff13fff 64bit]
[ 4.107273] pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
[ 4.111271] pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
[ 4.115262] pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
[ 4.119118] pci 0000:00:05.4: reg 0x10: [mem 0xd1760000-0xd1760fff]
[ 4.123276] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
[ 4.127226] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 4.131267] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
[ 4.135126] pci 0000:00:16.0: reg 0x10: [mem 0xd1750000-0xd175000f 64bit]
[ 4.139170] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 4.143231] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
[ 4.147126] pci 0000:00:16.1: reg 0x10: [mem 0xd1740000-0xd174000f 64bit]
[ 4.151170] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 4.155249] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
[ 4.159126] pci 0000:00:1a.0: reg 0x10: [mem 0xd1720000-0xd17203ff]
[ 4.163192] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 4.167226] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
[ 4.171204] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 4.175270] pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
[ 4.179203] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 4.183279] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
[ 4.187138] pci 0000:00:1d.0: reg 0x10: [mem 0xd1710000-0xd17103ff]
[ 4.191192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 4.195236] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 4.199277] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
[ 4.203335] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
[ 4.207122] pci 0000:00:1f.2: reg 0x10: [io 0x3070-0x3077]
[ 4.211110] pci 0000:00:1f.2: reg 0x14: [io 0x3060-0x3063]
[ 4.215110] pci 0000:00:1f.2: reg 0x18: [io 0x3050-0x3057]
[ 4.219110] pci 0000:00:1f.2: reg 0x1c: [io 0x3040-0x3043]
[ 4.223121] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
[ 4.227111] pci 0000:00:1f.2: reg 0x24: [mem 0xd1700000-0xd17007ff]
[ 4.231147] pci 0000:00:1f.2: PME# supported from D3hot
[ 4.235235] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
[ 4.239124] pci 0000:00:1f.3: reg 0x10: [mem 0x38007ff00000-0x38007ff000ff 64bit]
[ 4.243124] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 4.247368] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802
[ 4.251122] pci 0000:01:00.0: reg 0x10: [mem 0xd1600000-0xd1603fff 64bit]
[ 4.255204] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 4.259216] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 4.263118] pci 0000:00:01.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 4.267220] pci 0000:02:00.0: [1000:0064] type 00 class 0x010700
[ 4.271116] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 4.275111] pci 0000:02:00.0: reg 0x14: [mem 0xd1380000-0xd1383fff 64bit]
[ 4.279111] pci 0000:02:00.0: reg 0x1c: [mem 0xd1340000-0xd137ffff 64bit]
[ 4.283113] pci 0000:02:00.0: reg 0x30: [mem 0xd1100000-0xd117ffff pref]
[ 4.287108] pci 0000:02:00.0: enabling Extended Tags
[ 4.291156] pci 0000:02:00.0: supports D1 D2
[ 4.295139] pci 0000:02:00.0: reg 0x174: [mem 0xd1390000-0xd1393fff 64bit]
[ 4.299105] pci 0000:02:00.0: VF(n) BAR0 space: [mem 0xd1390000-0xd13abfff 64bit] (contains BAR0 for 7 VFs)
[ 4.303122] pci 0000:02:00.0: reg 0x17c: [mem 0xd1180000-0xd11bffff 64bit]
[ 4.307104] pci 0000:02:00.0: VF(n) BAR2 space: [mem 0xd1180000-0xd133ffff 64bit] (contains BAR2 for 7 VFs)
[ 4.311230] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 4.315106] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
[ 4.319106] pci 0000:00:02.0: bridge window [mem 0xd1100000-0xd13fffff]
[ 4.323218] pci 0000:00:02.2: PCI bridge to [bus 03]
[ 4.327262] pci 0000:04:00.0: [1912:0014] type 00 class 0x0c0330
[ 4.331136] pci 0000:04:00.0: reg 0x10: [mem 0xd1500000-0xd1501fff 64bit]
[ 4.335227] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 4.339281] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 4.343108] pci 0000:00:03.0: bridge window [mem 0xd1500000-0xd15fffff]
[ 4.347220] pci 0000:00:03.2: PCI bridge to [bus 05]
[ 4.351191] pci 0000:00:11.0: PCI bridge to [bus 06]
[ 4.355204] pci 0000:07:00.0: [8086:1521] type 00 class 0x020000
[ 4.359144] pci 0000:07:00.0: reg 0x10: [mem 0xd1420000-0xd143ffff]
[ 4.363128] pci 0000:07:00.0: reg 0x18: [io 0x1020-0x103f]
[ 4.367129] pci 0000:07:00.0: reg 0x1c: [mem 0xd1450000-0xd1453fff]
[ 4.371265] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 4.375147] pci 0000:07:00.0: reg 0x184: [mem 0xd14c0000-0xd14c3fff]
[ 4.379104] pci 0000:07:00.0: VF(n) BAR0 space: [mem 0xd14c0000-0xd14dffff] (contains BAR0 for 8 VFs)
[ 4.383137] pci 0000:07:00.0: reg 0x190: [mem 0xd14a0000-0xd14a3fff]
[ 4.387104] pci 0000:07:00.0: VF(n) BAR3 space: [mem 0xd14a0000-0xd14bffff] (contains BAR3 for 8 VFs)
[ 4.391328] pci 0000:07:00.1: [8086:1521] type 00 class 0x020000
[ 4.395142] pci 0000:07:00.1: reg 0x10: [mem 0xd1400000-0xd141ffff]
[ 4.399128] pci 0000:07:00.1: reg 0x18: [io 0x1000-0x101f]
[ 4.403117] pci 0000:07:00.1: reg 0x1c: [mem 0xd1440000-0xd1443fff]
[ 4.407260] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
[ 4.411146] pci 0000:07:00.1: reg 0x184: [mem 0xd1480000-0xd1483fff]
[ 4.415104] pci 0000:07:00.1: VF(n) BAR0 space: [mem 0xd1480000-0xd149ffff] (contains BAR0 for 8 VFs)
[ 4.419137] pci 0000:07:00.1: reg 0x190: [mem 0xd1460000-0xd1463fff]
[ 4.423105] pci 0000:07:00.1: VF(n) BAR3 space: [mem 0xd1460000-0xd147ffff] (contains BAR3 for 8 VFs)
[ 4.427321] pci 0000:00:1c.0: PCI bridge to [bus 07-08]
[ 4.431107] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 4.435106] pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd14fffff]
[ 4.439185] pci 0000:09:00.0: [102b:0522] type 00 class 0x030000
[ 4.443143] pci 0000:09:00.0: reg 0x10: [mem 0xea000000-0xeaffffff pref]
[ 4.447120] pci 0000:09:00.0: reg 0x14: [mem 0xd1010000-0xd1013fff]
[ 4.451120] pci 0000:09:00.0: reg 0x18: [mem 0xd0800000-0xd0ffffff]
[ 4.455166] pci 0000:09:00.0: reg 0x30: [mem 0xd1000000-0xd100ffff pref]
[ 4.459124] pci 0000:09:00.0: BAR 0: assigned to efifb
[ 4.463296] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 4.467109] pci 0000:00:1c.7: bridge window [mem 0xd0800000-0xd10fffff]
[ 4.471108] pci 0000:00:1c.7: bridge window [mem 0xea000000-0xeaffffff 64bit pref]
[ 4.475122] pci_bus 0000:0a: extended config space not accessible
[ 4.479170] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 4.483124] pci 0000:00:1e.0: bridge window [io 0x0000-0xbfff] (subtractive decode)
[ 4.487105] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 4.491104] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 4.495106] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 4.499116] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 4.503104] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 4.507104] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 4.511104] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 4.515104] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 4.519115] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 4.523104] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 4.527104] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 4.531104] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 4.535104] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 4.539104] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 4.543104] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xebffffff window] (subtractive decode)
[ 4.547116] pci 0000:00:1e.0: bridge window [mem 0x380000000000-0x38007fffffff window] (subtractive decode)
[ 4.551158] pci_bus 0000:00: on NUMA node 0
[ 4.551899] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.555156] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.559156] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 4.563154] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.567154] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 4.571172] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 4.575153] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.579153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 4.583264] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
[ 4.587107] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 4.591254] acpi PNP0A08:01: _OSC: platform does not support [AER LTR]
[ 4.595244] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 4.599104] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
[ 4.603369] PCI host bridge to bus 0000:80
[ 4.607106] pci_bus 0000:80: root bus resource [io 0x03b0-0x03df window]
[ 4.611104] pci_bus 0000:80: root bus resource [io 0xc000-0xffff window]
[ 4.615105] pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff window]
[ 4.619106] pci_bus 0000:80: root bus resource [mem 0xec000000-0xfbffffff window]
[ 4.623115] pci_bus 0000:80: root bus resource [mem 0x380080000000-0x3800ffffffff window]
[ 4.627104] pci_bus 0000:80: root bus resource [bus 80-fe]
[ 4.631121] pci 0000:80:02.0: [8086:3c04] type 01 class 0x060400
[ 4.635213] pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
[ 4.639291] pci 0000:80:04.0: [8086:3c20] type 00 class 0x088000
[ 4.643123] pci 0000:80:04.0: reg 0x10: [mem 0x3800ddf70000-0x3800ddf73fff 64bit]
[ 4.647248] pci 0000:80:04.1: [8086:3c21] type 00 class 0x088000
[ 4.651122] pci 0000:80:04.1: reg 0x10: [mem 0x3800ddf60000-0x3800ddf63fff 64bit]
[ 4.655261] pci 0000:80:04.2: [8086:3c22] type 00 class 0x088000
[ 4.659122] pci 0000:80:04.2: reg 0x10: [mem 0x3800ddf50000-0x3800ddf53fff 64bit]
[ 4.663256] pci 0000:80:04.3: [8086:3c23] type 00 class 0x088000
[ 4.667122] pci 0000:80:04.3: reg 0x10: [mem 0x3800ddf40000-0x3800ddf43fff 64bit]
[ 4.671240] pci 0000:80:04.4: [8086:3c24] type 00 class 0x088000
[ 4.675122] pci 0000:80:04.4: reg 0x10: [mem 0x3800ddf30000-0x3800ddf33fff 64bit]
[ 4.679260] pci 0000:80:04.5: [8086:3c25] type 00 class 0x088000
[ 4.683122] pci 0000:80:04.5: reg 0x10: [mem 0x3800ddf20000-0x3800ddf23fff 64bit]
[ 4.687248] pci 0000:80:04.6: [8086:3c26] type 00 class 0x088000
[ 4.691122] pci 0000:80:04.6: reg 0x10: [mem 0x3800ddf10000-0x3800ddf13fff 64bit]
[ 4.695254] pci 0000:80:04.7: [8086:3c27] type 00 class 0x088000
[ 4.699122] pci 0000:80:04.7: reg 0x10: [mem 0x3800ddf00000-0x3800ddf03fff 64bit]
[ 4.703257] pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000
[ 4.707257] pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000
[ 4.711246] pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020
[ 4.715119] pci 0000:80:05.4: reg 0x10: [mem 0xec200000-0xec200fff]
[ 4.719606] pci 0000:81:00.0: [15b3:1003] type 00 class 0x020000
[ 4.723567] pci 0000:81:00.0: reg 0x10: [mem 0xec100000-0xec1fffff 64bit]
[ 4.727321] pci 0000:81:00.0: reg 0x18: [mem 0x3800fe000000-0x3800ffffffff 64bit pref]
[ 4.731500] pci 0000:81:00.0: reg 0x30: [mem 0xec000000-0xec0fffff pref]
[ 4.736956] pci 0000:81:00.0: reg 0x134: [mem 0x3800de000000-0x3800dfffffff 64bit pref]
[ 4.739117] pci 0000:81:00.0: VF(n) BAR2 space: [mem 0x3800de000000-0x3800fdffffff 64bit pref] (contains BAR2 for 16 VFs)
[ 4.745185] pci 0000:80:02.0: PCI bridge to [bus 81]
[ 4.747109] pci 0000:80:02.0: bridge window [mem 0xec000000-0xec1fffff]
[ 4.751122] pci 0000:80:02.0: bridge window [mem 0x3800de000000-0x3800ffffffff 64bit pref]
[ 4.755113] pci_bus 0000:80: on NUMA node 1
[ 4.761112] ACPI: PCI Root Bridge [UCR0] (domain 0000 [bus 7f])
[ 4.763107] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 4.767136] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME AER]
[ 4.771131] acpi PNP0A03:00: _OSC: OS now controls [PCIeCapability LTR]
[ 4.775104] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 4.779188] PCI host bridge to bus 0000:7f
[ 4.783105] pci_bus 0000:7f: Unknown NUMA node; performance will be reduced
[ 4.787104] pci_bus 0000:7f: root bus resource [bus 7f]
[ 4.791115] pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
[ 4.795176] pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
[ 4.799188] pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
[ 4.803176] pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
[ 4.807182] pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
[ 4.811178] pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
[ 4.815174] pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
[ 4.819165] pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
[ 4.823152] pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
[ 4.827176] pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
[ 4.831176] pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
[ 4.835166] pci 0000:7f:0c.3: [8086:3ce8] type 00 class 0x088000
[ 4.839179] pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
[ 4.843253] pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
[ 4.847170] pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
[ 4.851178] pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
[ 4.855165] pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
[ 4.859162] pci 0000:7f:0d.3: [8086:3ce8] type 00 class 0x088000
[ 4.863164] pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
[ 4.867181] pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
[ 4.871160] pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
[ 4.875187] pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
[ 4.879209] pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
[ 4.883192] pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
[ 4.887208] pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
[ 4.891205] pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
[ 4.895194] pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
[ 4.899194] pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
[ 4.903177] pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
[ 4.907200] pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
[ 4.911203] pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
[ 4.915190] pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
[ 4.919200] pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
[ 4.923201] pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
[ 4.927189] pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
[ 4.931199] pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
[ 4.935201] pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
[ 4.939181] pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
[ 4.943174] pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
[ 4.947166] pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
[ 4.951175] pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
[ 4.955175] pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
[ 4.959259] ACPI: PCI Root Bridge [UCR1] (domain 0000 [bus ff])
[ 4.963107] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 4.967136] acpi PNP0A03:01: _OSC: platform does not support [PCIeHotplug PME AER]
[ 4.971132] acpi PNP0A03:01: _OSC: OS now controls [PCIeCapability LTR]
[ 4.975104] acpi PNP0A03:01: FADT indicates ASPM is unsupported, using BIOS configuration
[ 4.979182] PCI host bridge to bus 0000:ff
[ 4.983105] pci_bus 0000:ff: Unknown NUMA node; performance will be reduced
[ 4.987104] pci_bus 0000:ff: root bus resource [bus ff]
[ 4.991115] pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
[ 4.995183] pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
[ 4.999184] pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
[ 5.003177] pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
[ 5.007175] pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
[ 5.011164] pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
[ 5.015160] pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
[ 5.019178] pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
[ 5.023173] pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
[ 5.027166] pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
[ 5.031176] pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
[ 5.035172] pci 0000:ff:0c.3: [8086:3ce8] type 00 class 0x088000
[ 5.039179] pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
[ 5.043156] pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
[ 5.047178] pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
[ 5.051157] pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
[ 5.055190] pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
[ 5.059178] pci 0000:ff:0d.3: [8086:3ce8] type 00 class 0x088000
[ 5.063157] pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
[ 5.067177] pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
[ 5.071181] pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
[ 5.075195] pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
[ 5.079199] pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
[ 5.083196] pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
[ 5.087195] pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
[ 5.091188] pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
[ 5.095198] pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
[ 5.099192] pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
[ 5.103170] pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
[ 5.107195] pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
[ 5.111196] pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
[ 5.115187] pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
[ 5.119194] pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
[ 5.123199] pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
[ 5.127189] pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
[ 5.131194] pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
[ 5.135187] pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
[ 5.139182] pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
[ 5.143165] pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
[ 5.147159] pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
[ 5.151165] pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
[ 5.155157] pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
[ 5.159751] iommu: Default domain type: Translated
[ 5.163164] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[ 5.167102] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 5.167136] pci 0000:09:00.0: vgaarb: bridge control possible
[ 5.171124] vgaarb: loaded
[ 5.174622] SCSI subsystem initialized
[ 5.175220] libata version 3.00 loaded.
[ 5.175220] ACPI: bus type USB registered
[ 5.179148] usbcore: registered new interface driver usbfs
[ 5.183135] usbcore: registered new interface driver hub
[ 5.187263] usbcore: registered new device driver usb
[ 5.191327] EDAC MC: Ver: 3.0.0
[ 5.195346] Registered efivars operations
[ 5.199453] NetLabel: Initializing
[ 5.203105] NetLabel: domain hash size = 128
[ 5.207103] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 5.211140] NetLabel: unlabeled traffic allowed by default
[ 5.215145] PCI: Using ACPI for IRQ routing
[ 5.224040] PCI: pci_cache_line_size set to 64 bytes
[ 5.224283] e820: reserve RAM buffer [mem 0xbad34000-0xbbffffff]
[ 5.224288] e820: reserve RAM buffer [mem 0xbafb7000-0xbbffffff]
[ 5.224289] e820: reserve RAM buffer [mem 0xbb3d4000-0xbbffffff]
[ 5.224290] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[ 5.224295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 5.227105] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 5.233271] clocksource: Switched to clocksource tsc-early
[ 5.259785] VFS: Disk quotas dquot_6.6.0
[ 5.264326] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.272237] pnp: PnP ACPI init
[ 5.275952] system 00:00: [io 0x0680-0x069f] has been reserved
[ 5.282575] system 00:00: [io 0xffff] has been reserved
[ 5.288516] system 00:00: [io 0xffff] has been reserved
[ 5.294446] system 00:00: [io 0xffff] has been reserved
[ 5.300395] system 00:00: [io 0x0400-0x0453] has been reserved
[ 5.307015] system 00:00: [io 0x0458-0x047f] has been reserved
[ 5.313645] system 00:00: [io 0x0500-0x057f] has been reserved
[ 5.320266] system 00:00: [io 0x0600-0x061f] has been reserved
[ 5.326883] system 00:00: [io 0x0ca2-0x0ca5] could not be reserved
[ 5.333884] system 00:00: [io 0x0cf9] could not be reserved
[ 5.340220] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.340257] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 5.340387] system 00:02: [io 0x0454-0x0457] has been reserved
[ 5.347004] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 5.347256] pnp 00:03: [dma 0 disabled]
[ 5.347319] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 5.347482] pnp 00:04: [dma 0 disabled]
[ 5.347543] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 5.347937] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 5.355335] system 00:05: [mem 0xebfff000-0xebffffff] has been reserved
[ 5.362721] system 00:05: [mem 0xc0000000-0xcfffffff] has been reserved
[ 5.370127] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 5.377522] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 5.384914] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 5.392711] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 5.400495] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 5.408269] system 00:05: [mem 0xd0000000-0xd0000fff] has been reserved
[ 5.415657] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.415819] system 00:06: [mem 0xebffc000-0xebffdfff] could not be reserved
[ 5.423606] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.423953] system 00:07: [mem 0xfbffe000-0xfbffffff] could not be reserved
[ 5.431733] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 5.431857] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
[ 5.439638] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 5.440041] pnp: PnP ACPI: found 9 devices
[ 5.451077] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 5.461206] NET: Registered protocol family 2
[ 5.466737] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ 5.477062] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
[ 5.487214] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[ 5.495760] TCP: Hash tables configured (established 524288 bind 65536)
[ 5.503563] UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ 5.511879] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
[ 5.521339] NET: Registered protocol family 1
[ 5.526266] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 5.531817] pci 0000:00:01.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 5.539408] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 5.544946] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
[ 5.551770] pci 0000:00:02.0: bridge window [mem 0xd1100000-0xd13fffff]
[ 5.559372] pci 0000:00:02.2: PCI bridge to [bus 03]
[ 5.564935] pci 0000:00:03.0: PCI bridge to [bus 04]
[ 5.570491] pci 0000:00:03.0: bridge window [mem 0xd1500000-0xd15fffff]
[ 5.578087] pci 0000:00:03.2: PCI bridge to [bus 05]
[ 5.583650] pci 0000:00:11.0: PCI bridge to [bus 06]
[ 5.589217] pci 0000:00:1c.0: PCI bridge to [bus 07-08]
[ 5.595063] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 5.601877] pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd14fffff]
[ 5.609475] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 5.615032] pci 0000:00:1c.7: bridge window [mem 0xd0800000-0xd10fffff]
[ 5.622626] pci 0000:00:1c.7: bridge window [mem 0xea000000-0xeaffffff 64bit pref]
[ 5.631284] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 5.636850] pci_bus 0000:00: resource 4 [io 0x0000-0xbfff]
[ 5.643088] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
[ 5.650777] pci_bus 0000:00: resource 6 [mem 0x000c0000-0x000c3fff window]
[ 5.658453] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c7fff window]
[ 5.666151] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 5.673839] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 5.681527] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 5.689313] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 5.697086] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 5.704850] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 5.712633] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 5.720406] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 5.728179] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 5.735963] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 5.743735] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 5.751521] pci_bus 0000:00: resource 19 [mem 0xd0000000-0xebffffff window]
[ 5.759295] pci_bus 0000:00: resource 20 [mem 0x380000000000-0x38007fffffff window]
[ 5.767864] pci_bus 0000:01: resource 1 [mem 0xd1600000-0xd16fffff]
[ 5.774883] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 5.781117] pci_bus 0000:02: resource 1 [mem 0xd1100000-0xd13fffff]
[ 5.788127] pci_bus 0000:04: resource 1 [mem 0xd1500000-0xd15fffff]
[ 5.795138] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 5.801359] pci_bus 0000:07: resource 1 [mem 0xd1400000-0xd14fffff]
[ 5.808370] pci_bus 0000:09: resource 1 [mem 0xd0800000-0xd10fffff]
[ 5.815378] pci_bus 0000:09: resource 2 [mem 0xea000000-0xeaffffff 64bit pref]
[ 5.823466] pci_bus 0000:0a: resource 4 [io 0x0000-0xbfff]
[ 5.829699] pci_bus 0000:0a: resource 5 [mem 0x000a0000-0x000bffff window]
[ 5.837387] pci_bus 0000:0a: resource 6 [mem 0x000c0000-0x000c3fff window]
[ 5.845074] pci_bus 0000:0a: resource 7 [mem 0x000c4000-0x000c7fff window]
[ 5.852762] pci_bus 0000:0a: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 5.860437] pci_bus 0000:0a: resource 9 [mem 0x000cc000-0x000cffff window]
[ 5.868135] pci_bus 0000:0a: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 5.875908] pci_bus 0000:0a: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 5.883685] pci_bus 0000:0a: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 5.891458] pci_bus 0000:0a: resource 13 [mem 0x000dc000-0x000dffff window]
[ 5.899222] pci_bus 0000:0a: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 5.907008] pci_bus 0000:0a: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 5.914803] pci_bus 0000:0a: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 5.922587] pci_bus 0000:0a: resource 17 [mem 0x000ec000-0x000effff window]
[ 5.930391] pci_bus 0000:0a: resource 18 [mem 0x000f0000-0x000fffff window]
[ 5.938175] pci_bus 0000:0a: resource 19 [mem 0xd0000000-0xebffffff window]
[ 5.945981] pci_bus 0000:0a: resource 20 [mem 0x380000000000-0x38007fffffff window]
[ 5.954671] pci 0000:80:02.0: PCI bridge to [bus 81]
[ 5.960229] pci 0000:80:02.0: bridge window [mem 0xec000000-0xec1fffff]
[ 5.967831] pci 0000:80:02.0: bridge window [mem 0x3800de000000-0x3800ffffffff 64bit pref]
[ 5.977260] pci_bus 0000:80: resource 4 [io 0x03b0-0x03df window]
[ 5.984161] pci_bus 0000:80: resource 5 [io 0xc000-0xffff window]
[ 5.991083] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff window]
[ 5.998758] pci_bus 0000:80: resource 7 [mem 0xec000000-0xfbffffff window]
[ 6.006446] pci_bus 0000:80: resource 8 [mem 0x380080000000-0x3800ffffffff window]
[ 6.014899] pci_bus 0000:81: resource 1 [mem 0xec000000-0xec1fffff]
[ 6.021910] pci_bus 0000:81: resource 2 [mem 0x3800de000000-0x3800ffffffff 64bit pref]
[ 6.030852] pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28]
[ 6.039433] pci 0000:04:00.0: enabling device (0140 -> 0142)
[ 6.045901] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 6.055286] pci 0000:80:05.0: disabled boot interrupts on device [8086:3c28]
[ 6.063362] PCI: CLS 64 bytes, default 64
[ 6.067923] Trying to unpack rootfs image as initramfs...
[ 7.240495] Freeing initrd memory: 61556K
[ 7.267187] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 7.274403] software IO TLB: mapped [mem 0xb1f0e000-0xb5f0e000] (64MB)
[ 7.285049] check: Scanning for low memory corruption every 60 seconds
[ 7.295288] Initialise system trusted keyrings
[ 7.300411] workingset: timestamp_bits=40 max_order=26 bucket_order=0
[ 7.309426] zbud: loaded
[ 7.313029] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.319908] fuse: init (API version 7.31)
[ 7.324665] Allocating IMA blacklist keyring.
[ 7.342583] Key type asymmetric registered
[ 7.347163] Asymmetric key parser 'x509' registered
[ 7.352653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 7.361104] io scheduler mq-deadline registered
[ 7.367148] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
[ 7.374061] pcieport 0000:00:02.0: PME: Signaling with IRQ 26
[ 7.380837] pcieport 0000:00:02.2: PME: Signaling with IRQ 27
[ 7.387569] pcieport 0000:00:03.0: PME: Signaling with IRQ 28
[ 7.394355] pcieport 0000:00:03.2: PME: Signaling with IRQ 29
[ 7.401163] pcieport 0000:00:11.0: PME: Signaling with IRQ 30
[ 7.407905] pcieport 0000:00:1c.0: PME: Signaling with IRQ 31
[ 7.414607] pcieport 0000:00:1c.7: PME: Signaling with IRQ 32
[ 7.421636] pcieport 0000:80:02.0: PME: Signaling with IRQ 34
[ 7.428636] efifb: probing for efifb
[ 7.432712] efifb: framebuffer at 0xea000000, using 1920k, total 1920k
[ 7.440017] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 7.446629] efifb: scrolling: redraw
[ 7.450643] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 7.470331] Console: switching to colour frame buffer device 100x37
[ 7.490631] fb0: EFI VGA frame buffer device
[ 7.495596] intel_idle: MWAIT substates: 0x21120
[ 7.495748] Monitor-Mwait will be used to enter C-1 state
[ 7.495763] Monitor-Mwait will be used to enter C-2 state
[ 7.495776] Monitor-Mwait will be used to enter C-2 state
[ 7.495796] ACPI: \_SB_.SCK0.CP00: Found 3 idle states
[ 7.501865] intel_idle: v0.5.1 model 0x2D
[ 7.505394] intel_idle: Local APIC timer is reliable in all C-states
[ 7.506039] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 7.515910] ACPI: Sleep Button [SLPB]
[ 7.520282] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.528920] ACPI: Power Button [PWRF]
[ 7.606751] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 7.615441] pstore: Registered erst as persistent store backend
[ 7.622672] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 7.631538] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 7.639151] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 7.649465] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 7.669525] Linux agpgart interface v0.103
[ 7.699609] brd: module loaded
[ 7.741983] loop: module loaded
[ 7.752974] nvme nvme0: pci function 0000:01:00.0
[ 7.765045] libphy: Fixed MDIO Bus: probed
[ 7.775818] tun: Universal TUN/TAP device driver, 1.6
[ 7.780781] nvme nvme0: 7/0/0 default/read/poll queues
[ 7.787939] PPP generic driver version 2.4.2
[ 7.810622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.824156] ehci-pci: EHCI PCI platform driver
[ 7.835614] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 7.846355] nvme0n1: p1 p2 p3 p4 p5
[ 7.847738] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 7.873010] ehci-pci 0000:00:1a.0: debug port 2
[ 7.888734] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 7.903238] ehci-pci 0000:00:1a.0: irq 22, io mem 0xd1720000
[ 7.931207] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 7.944750] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 7.961384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.976860] usb usb1: Product: EHCI Host Controller
[ 7.989641] usb usb1: Manufacturer: Linux 5.8.12 ehci_hcd
[ 8.002963] usb usb1: SerialNumber: 0000:00:1a.0
[ 8.015648] hub 1-0:1.0: USB hub found
[ 8.027059] hub 1-0:1.0: 2 ports detected
[ 8.039121] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 8.052077] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.067524] ehci-pci 0000:00:1d.0: debug port 2
[ 8.083419] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 8.097897] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd1710000
[ 8.123183] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 8.136245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 8.152205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.166890] usb usb2: Product: EHCI Host Controller
[ 8.178854] usb usb2: Manufacturer: Linux 5.8.12 ehci_hcd
[ 8.191302] usb usb2: SerialNumber: 0000:00:1d.0
[ 8.202960] hub 2-0:1.0: USB hub found
[ 8.213500] hub 2-0:1.0: 2 ports detected
[ 8.224425] ehci-platform: EHCI generic platform driver
[ 8.236587] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.249934] ohci-pci: OHCI PCI platform driver
[ 8.261344] ohci-platform: OHCI generic platform driver
[ 8.273619] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.287358] i8042: PNP: No PS/2 controller found.
[ 8.295159] tsc: Refined TSC clocksource calibration: 2194.708 MHz
[ 8.299306] mousedev: PS/2 mouse device common for all mice
[ 8.312631] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa2ab968d6, max_idle_ns: 440795267499 ns
[ 8.325754] rtc_cmos 00:01: RTC can wake from S4
[ 8.361922] clocksource: Switched to clocksource tsc
[ 8.362733] rtc_cmos 00:01: registered as rtc0
[ 8.383158] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 8.399956] rtc_cmos 00:01: setting system clock to 2020-09-29T19:32:54 UTC (1601407974)
[ 8.400029] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 8.431732] i2c /dev entries driver
[ 8.442694] device-mapper: uevent: version 1.0.3
[ 8.454992] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 8.471523] intel_pstate: Intel P-state driver initializing
[ 8.495217] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.509165] EFI Variables Facility v0.08 2004-May-17
[ 8.536204] NET: Registered protocol family 10
[ 8.549294] Segment Routing with IPv6
[ 8.560639] NET: Registered protocol family 17
[ 8.573006] Key type dns_resolver registered
[ 8.579995] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 8.591326] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 8.601688] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.632470] hub 1-1:1.0: USB hub found
[ 8.633899] microcode: sig=0x206d7, pf=0x1, revision=0x710
[ 8.644294] hub 1-1:1.0: 6 ports detected
[ 8.670192] microcode: Microcode Update Driver: v2.2.
[ 8.670195] IPI shorthand broadcast: enabled
[ 8.695506] sched_clock: Marking stable (7209339075, 1486147457)->(10149158576, -1453672044)
[ 8.713087] registered taskstats version 1
[ 8.725462] Loading compiled-in X.509 certificates
[ 8.738677] zswap: loaded using pool lzo/zbud
[ 8.752460] Key type ._fscrypt registered
[ 8.764628] Key type .fscrypt registered
[ 8.776650] Key type fscrypt-provisioning registered
[ 8.791470] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 8.808398] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.809921] pstore: Using crash dump compression: deflate
[ 8.824568] hub 2-1:1.0: USB hub found
[ 8.840529] Key type encrypted registered
[ 8.851262] hub 2-1:1.0: 8 ports detected
[ 8.861449] ima: No TPM chip found, activating TPM-bypass!
[ 8.886676] ima: Allocated hash algorithm: sha1
[ 8.899076] ima: No architecture policies found
[ 8.911384] evm: Initialising EVM extended attributes:
[ 8.924263] evm: security.selinux
[ 8.934935] evm: security.SMACK64
[ 8.945407] evm: security.SMACK64EXEC
[ 8.956165] evm: security.SMACK64TRANSMUTE
[ 8.967237] evm: security.SMACK64MMAP
[ 8.977566] evm: security.apparmor
[ 8.987488] evm: security.ima
[ 8.996722] evm: security.capability
[ 9.006559] evm: HMAC attrs: 0x1
[ 9.016665] PM: Magic number: 4:692:547
[ 9.026992] tty ttyS23: hash matches
[ 9.039266] Freeing unused kernel image (initmem) memory: 1760K
[ 9.067262] Write protecting the kernel read-only data: 22528k
[ 9.080598] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 9.094555] Freeing unused kernel image (rodata/data gap) memory: 1572K
[ 9.156181] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 9.159118] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 9.169042] x86/mm: Checking user space page tables
[ 9.239356] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 9.252348] Run /init as init process
[ 9.262041] with arguments:
[ 9.262042] /init
[ 9.262042] with environment:
[ 9.262043] HOME=/
[ 9.262043] TERM=linux
[ 9.262044] BOOT_IMAGE=/boot/vmlinuz-5.8.12
[ 9.292339] usb 2-1.3: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
[ 9.307411] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.321300] usb 2-1.3: Product: Ultra Fit
[ 9.331484] usb 2-1.3: Manufacturer: SanDisk
[ 9.341945] usb 2-1.3: SerialNumber: 4C531001601201118042
[ 9.357051] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 9.370124] scsi host0: usb-storage 2-1.3:1.0
[ 9.380740] usbcore: registered new interface driver usb-storage
[ 9.394261] usbcore: registered new interface driver uas
[ 9.419009] acpi PNP0C14:00: duplicate WMI GUID 0E7AF9F2-44A1-4C6F-A4B0-A7678480DA61 (first instance was on PNP0C14:00)
[ 9.435131] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[ 9.438131] random: lvm: uninitialized urandom read (4 bytes read)
[ 9.442731] acpi PNP0C14:00: duplicate WMI GUID 0E7AF9F2-44A1-4C6F-A4B0-A7678480DA61 (first instance was on PNP0C14:00)
[ 9.454859] random: lvm: uninitialized urandom read (2 bytes read)
[ 9.510328] pps_core: LinuxPPS API ver. 1 registered
[ 9.510497] cryptd: max_cpu_qlen set to 1000
[ 9.510537] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 9.510543] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 9.515939] xhci_hcd 0000:04:00.0: hcc params 0x014051c7 hci version 0x100 quirks 0x0000001100000410
[ 9.516540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 9.516542] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.516543] usb usb3: Product: xHCI Host Controller
[ 9.516544] usb usb3: Manufacturer: Linux 5.8.12 xhci-hcd
[ 9.516545] usb usb3: SerialNumber: 0000:04:00.0
[ 9.516666] hub 3-0:1.0: USB hub found
[ 9.516675] hub 3-0:1.0: 4 ports detected
[ 9.516907] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 9.516910] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 9.516913] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 9.519548] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.519564] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 9.519566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.519567] usb usb4: Product: xHCI Host Controller
[ 9.519567] usb usb4: Manufacturer: Linux 5.8.12 xhci-hcd
[ 9.519569] usb usb4: SerialNumber: 0000:04:00.0
[ 9.519653] hub 4-0:1.0: USB hub found
[ 9.519661] hub 4-0:1.0: 4 ports detected
[ 9.522740] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.588900] usb 2-1.4: New USB device found, idVendor=046b, idProduct=ff10, bcdDevice= 1.00
[ 9.881767] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.897776] usb 2-1.4: Product: Virtual Keyboard and Mouse
[ 9.911816] usb 2-1.4: Manufacturer: American Megatrends Inc.
[ 9.925995] usb 2-1.4: SerialNumber: serial
[ 9.957058] ahci 0000:00:1f.2: version 3.0
[ 9.958147] PTP clock support registered
[ 9.968057] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 9.986674] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 10.003520] setting logging_level(0x000003f8)
[ 10.017469] mpt3sas version 34.100.00.00 loaded
[ 10.017479] AVX version of gcm_enc/dec engaged.
[ 10.017641] mlx4_core: Mellanox ConnectX core driver v4.0-0
[ 10.017673] mlx4_core: Initializing 0000:81:00.0
[ 10.027133] usb 2-1.7: new full-speed USB device number 5 using ehci-pci
[ 10.030017] mpt3sas 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.041946] AES CTR mode by8 optimization enabled
[ 10.110816] mpt2sas_cm0: mpt3sas_base_attach
[ 10.110913] dca service started, version 1.12.1
[ 10.122668] mpt2sas_cm0: mpt3sas_base_map_resources
[ 10.140735] usb 2-1.7: New USB device found, idVendor=1546, idProduct=01a6, bcdDevice= 7.03
[ 10.147693] scsi host2: ahci
[ 10.163432] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.173819] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (197972228 kB)
[ 10.189366] usb 2-1.7: Product: u-blox 6 - GPS Receiver
[ 10.206466] mpt2sas_cm0: _base_get_ioc_facts
[ 10.219986] usb 2-1.7: Manufacturer: u-blox AG - www.u-blox.com
[ 10.246805] mpt2sas_cm0: _base_wait_for_iocstate
[ 10.260177] scsi host3: ahci
[ 10.271074] scsi host4: ahci
[ 10.281958] scsi host5: ahci
[ 10.292565] scsi host6: ahci
[ 10.299138] usb 2-1.8: new full-speed USB device number 6 using ehci-pci
[ 10.303153] scsi host7: ahci
[ 10.328158] ata1: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700100 irq 53
[ 10.343989] ata2: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700180 irq 53
[ 10.359546] ata3: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700200 irq 53
[ 10.374807] ata4: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700280 irq 53
[ 10.389813] ata5: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700300 irq 53
[ 10.404635] ata6: SATA max UDMA/133 abar m2048@0xd1700000 port 0xd1700380 irq 53
[ 10.412371] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 10.433718] usb 2-1.8: New USB device found, idVendor=051d, idProduct=0003, bcdDevice= 1.06
[ 10.435546] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.450887] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.464152] offset:data
[ 10.478544] usb 2-1.8: Product: Smart-UPS 2200 FW:UPS 06.3 / MCU 11.0
[ 10.488004] mpt2sas_cm0: [0x00]:03100200
[ 10.488004] mpt2sas_cm0: [0x04]:00002300
[ 10.488005] mpt2sas_cm0: [0x08]:00000000
[ 10.488005] mpt2sas_cm0: [0x0c]:00000000
[ 10.488006] mpt2sas_cm0: [0x10]:00000000
[ 10.488007] mpt2sas_cm0: [0x14]:00010080
[ 10.488007] mpt2sas_cm0: [0x18]:22137ec7
[ 10.488008] mpt2sas_cm0: [0x1c]:0001285c
[ 10.488017] mpt2sas_cm0: [0x20]:14000600
[ 10.501945] usb 2-1.8: Manufacturer: American Power Conversion
[ 10.501961] usb 2-1.8: SerialNumber: JS1051006712
[ 10.513140] mpt2sas_cm0: [0x24]:00000020
[ 10.513140] mpt2sas_cm0: [0x28]:04000020
[ 10.513141] mpt2sas_cm0: [0x2c]:00810080
[ 10.513141] mpt2sas_cm0: [0x30]:007f0003
[ 10.513142] mpt2sas_cm0: [0x34]:0020ffe0
[ 10.513154] mpt2sas_cm0: [0x38]:008004b0
[ 10.513154] mpt2sas_cm0: [0x3c]:00000011
[ 10.513155] mpt2sas_cm0: [0x40]:00000000
[ 10.513156] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 10.524350] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 10.535178] mpt2sas_cm0: CurrentHostPageSize(0)
[ 10.548205] sd 0:0:0:0: [sda] Write Protect is off
[ 10.556610] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
[ 10.566972] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 10.577132] mpt2sas_cm0: request frame size(128), reply frame size(128)
[ 10.589074] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 10.597175] mpt2sas_cm0: msix is supported, vector_count(1)
[ 10.692084] hid: raw HID events driver (C) Jiri Kosina
[ 10.692148] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 10.692149] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 10.705215] mpt2sas_cm0: MSI-X vectors supported: 1
[ 10.705216] no of cores: 32, max_msix_vectors: -1
[ 10.705217] mpt2sas_cm0: 0 1
[ 10.705359] mpt2sas_cm0: High IOPs queues : disabled
[ 10.757534] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.761609] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 56
[ 10.761611] mpt2sas_cm0: iomem(0x00000000d1380000), mapped(0x(____ptrval____)), size(16384)
[ 10.761613] mpt2sas_cm0: ioport(0x0000000000002000), size(256)
[ 10.781648] ata1: SATA link down (SStatus 0 SControl 300)
[ 10.793026] mpt2sas_cm0: _base_get_ioc_facts
[ 10.804281] ata6: SATA link down (SStatus 0 SControl 300)
[ 10.817492] mpt2sas_cm0: _base_wait_for_iocstate
[ 10.821742] usbcore: registered new interface driver usbhid
[ 10.821743] usbhid: USB HID core driver
[ 10.829361] ata3: SATA link down (SStatus 0 SControl 300)
[ 10.906674] offset:data
[ 10.917639] ata5: SATA link down (SStatus 0 SControl 300)
[ 10.917791] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046B:FF10.0001/input/input2
[ 10.917893] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.4/input0
[ 10.918019] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046B:FF10.0002/input/input3
[ 10.918245] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.4/input1
[ 10.918692] hid-generic 0003:051D:0003.0003: hiddev0,hidraw2: USB HID v1.00 Device [American Power Conversion Smart-UPS 2200 FW:UPS 06.3 / MCU 11.0] on usb-0000:00:1d.0-1.8/input0
[ 10.925117] random: fast init done
[ 10.929067] mpt2sas_cm0: [0x00]:03100200
[ 10.939600] ata2: SATA link down (SStatus 0 SControl 300)
[ 10.951294] mpt2sas_cm0: [0x04]:00002300
[ 10.984639] sda: sda1 sda2 sda3
[ 10.985180] mpt2sas_cm0: [0x08]:00000000
[ 11.005873] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 11.006343] mpt2sas_cm0: [0x0c]:00000000
[ 11.285853] mpt2sas_cm0: [0x10]:00000000
[ 11.298311] mpt2sas_cm0: [0x14]:00010080
[ 11.310617] mpt2sas_cm0: [0x18]:22137ec7
[ 11.322831] mpt2sas_cm0: [0x1c]:0001285c
[ 11.334964] mpt2sas_cm0: [0x20]:14000600
[ 11.347072] mpt2sas_cm0: [0x24]:00000020
[ 11.359060] mpt2sas_cm0: [0x28]:04000020
[ 11.370880] mpt2sas_cm0: [0x2c]:00810080
[ 11.382482] mpt2sas_cm0: [0x30]:007f0003
[ 11.393927] mpt2sas_cm0: [0x34]:0020ffe0
[ 11.405226] mpt2sas_cm0: [0x38]:008004b0
[ 11.416400] mpt2sas_cm0: [0x3c]:00000011
[ 11.427427] mpt2sas_cm0: [0x40]:00000000
[ 11.438335] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 11.453888] mpt2sas_cm0: CurrentHostPageSize(0)
[ 11.465416] mpt2sas_cm0: hba queue depth(32455), max chains per io(128)
[ 11.479358] mpt2sas_cm0: request frame size(128), reply frame size(128)
[ 11.493291] mpt2sas_cm0: _base_make_ioc_ready
[ 11.507135] mpt2sas_cm0: _base_get_port_facts
[ 11.519349] igb 0000:07:00.0: added PHC on eth0
[ 11.530468] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 11.544129] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:e9
[ 11.558034] igb 0000:07:00.0: eth0: PBA No: 100000-000
[ 11.569355] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 11.616691] offset:data
[ 11.624765] mpt2sas_cm0: [0x00]:05070000
[ 11.634321] mpt2sas_cm0: [0x04]:00000000
[ 11.643579] mpt2sas_cm0: [0x08]:00000000
[ 11.652537] mpt2sas_cm0: [0x0c]:00000000
[ 11.661248] mpt2sas_cm0: [0x10]:00000000
[ 11.669892] mpt2sas_cm0: [0x14]:00003000
[ 11.678382] mpt2sas_cm0: [0x18]:00000100
[ 11.686741] mpt2sas_cm0: _base_allocate_memory_pools
[ 11.696171] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15)
[ 11.715890] ------------[ cut here ]------------
[ 11.725227] WARNING: CPU: 0 PID: 5 at mm/page_alloc.c:4831 __alloc_pages_nodemask+0x1ce/0x310
[ 11.739330] Modules linked in: fjes(-) hid_generic usbhid hid crct10dif_pclmul igb(+) crc32_pclmul ghash_clmulni_intel dca aesni_intel ptp ahci crypto_simd mpt3sas(+) pps_core xhci_pci cryptd mlx4_core(+) raid_class i2c_algo_bit libahci xhci_pci_renesas glue_helper scsi_transport_sas wmi uas usb_storage deflate
[ 11.791023] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.8.12 #1
[ 11.803622] Hardware name: ZTSYSTEM CYPRESS11 /S2600CP , BIOS SE5C600.86B.02.06.0006.032420170950 03/24/2017
[ 11.827610] Workqueue: events work_for_cpu_fn
[ 11.838884] RIP: 0010:__alloc_pages_nodemask+0x1ce/0x310
[ 11.851367] Code: ff ff ff 65 48 8b 04 25 c0 7b 01 00 48 05 78 08 00 00 41 bd 01 00 00 00 48 89 44 24 08 e9 05 ff ff ff 81 e7 00 20 00 00 75 02 <0f> 0b 45 31 ed eb 95 44 8b 64 24 18 65 8b 05 1f a6 7a 4b 89 c0 48
[ 11.893686] RSP: 0018:ffffc18e000bbc98 EFLAGS: 00010246
[ 11.906822] RAX: 0000000000000000 RBX: 0000000000000cc0 RCX: 0000000000000000
[ 11.922228] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000
[ 11.937510] RBP: 000000000075d000 R08: 000000000075d000 R09: ffffffffffffffff
[ 11.952755] R10: 0000000000000000 R11: ffff9e6a16c22350 R12: ffffffffffffffff
[ 11.967942] R13: 0000000000000000 R14: ffff9e5215c34f58 R15: ffff9e52163590b0
[ 11.983165] FS: 0000000000000000(0000) GS:ffff9e521ea00000(0000) knlGS:0000000000000000
[ 11.999566] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 12.013320] CR2: 000055c7853e9ef0 CR3: 00000003d620a003 CR4: 00000000000606f0
[ 12.028719] Call Trace:
[ 12.038777] dma_direct_alloc_pages+0x171/0x2a0
[ 12.051185] dma_pool_alloc+0xd0/0x1c0
[ 12.062585] base_alloc_rdpq_dma_pool+0x118/0x1d0 [mpt3sas]
[ 12.076131] _base_allocate_memory_pools+0x2d6/0x1240 [mpt3sas]
[ 12.090232] mpt3sas_base_attach+0x4a4/0x930 [mpt3sas]
[ 12.103599] _scsih_probe+0x4e3/0x920 [mpt3sas]
[ 12.116383] local_pci_probe+0x42/0x90
[ 12.128401] work_for_cpu_fn+0x16/0x20
[ 12.140466] process_one_work+0x208/0x400
[ 12.152910] worker_thread+0x221/0x3e0
[ 12.165053] ? process_one_work+0x400/0x400
[ 12.177573] kthread+0x117/0x130
[ 12.188759] ? kthread_park+0x90/0x90
[ 12.200400] ret_from_fork+0x22/0x30
[ 12.211748] ---[ end trace 1d2f9a5394100a7e ]---
[ 12.224134] mpt2sas_cm0: mpt3sas_base_free_resources
[ 12.237582] mpt2sas_cm0: _base_make_ioc_ready
[ 12.249253] mpt2sas_cm0: mpt3sas_base_unmap_resources
[ 12.264417] igb 0000:07:00.1: added PHC on eth1
[ 12.276024] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 12.290184] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:1e:67:97:4d:ea
[ 12.304604] igb 0000:07:00.1: eth1: PBA No: 100000-000
[ 12.316624] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 12.331505] mpt2sas_cm0: _base_release_memory_pools
[ 12.343209] mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
[ 12.360938] igb 0000:07:00.1 unused: renamed from eth1
[ 16.089896] mlx4_core 0000:81:00.0: DMFS high rate steer mode is: disabled performance optimized steering
[ 16.113604] mlx4_core 0000:81:00.0: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
[ 16.359039] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
[ 16.373162] mlx4_en 0000:81:00.0: Activating port:1
[ 16.389569] mlx4_en: 0000:81:00.0: Port 1: Using 32 TX rings
[ 16.402903] mlx4_en: 0000:81:00.0: Port 1: Using 16 RX rings
[ 16.416354] mlx4_en: 0000:81:00.0: Port 1: Initializing port
[ 16.430528] mlx4_en 0000:81:00.0: registered PHC clock
[ 16.443368] mlx4_en 0000:81:00.0: Activating port:2
[ 16.444668] mlx4_core 0000:81:00.0 eth40b: renamed from eth1
[ 16.456773] mlx4_en: 0000:81:00.0: Port 2: Using 32 TX rings
[ 16.480752] mlx4_en: 0000:81:00.0: Port 2: Using 16 RX rings
[ 16.493713] mlx4_en: 0000:81:00.0: Port 2: Initializing port
[ 16.527884] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0
[ 16.537689] mlx4_core 0000:81:00.0 eth40a: renamed from eth1
[ 16.544976] <mlx4_ib> mlx4_ib_add: counter index 2 for port 1 allocated 1
[ 16.569939] <mlx4_ib> mlx4_ib_add: counter index 3 for port 2 allocated 1
[ 17.587106] raid6: sse2x4 gen() 12804 MB/s
[ 17.663105] raid6: sse2x4 xor() 6753 MB/s
[ 17.739104] raid6: sse2x2 gen() 10053 MB/s
[ 17.815105] raid6: sse2x2 xor() 7832 MB/s
[ 17.891106] raid6: sse2x1 gen() 10861 MB/s
[ 17.967104] raid6: sse2x1 xor() 6801 MB/s
[ 17.978285] raid6: using algorithm sse2x4 gen() 12804 MB/s
[ 17.990866] raid6: .... xor() 6753 MB/s, rmw enabled
[ 18.002847] raid6: using ssse3x2 recovery algorithm
[ 18.015525] xor: automatically using best checksumming function avx
[ 18.030869] async_tx: api initialized (async)
[ 18.076680] random: lvm: uninitialized urandom read (4 bytes read)
[ 18.151840] random: vgchange: uninitialized urandom read (4 bytes read)
[ 18.229419] process '/bin/fstype' started with executable stack
[ 18.279511] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 18.640371] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 18.708852] systemd[1]: Detected architecture x86-64.
[ 18.726220] mlx4_en: eth40b: Link Up
[ 18.738137] mlx4_en: eth40a: Link Up
[ 18.784541] systemd[1]: Set hostname to <fili>.
[ 18.894240] random: systemd: uninitialized urandom read (16 bytes read)
[ 18.909784] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 18.946878] systemd[1]: Created slice System Slice.
[ 18.969366] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 18.994106] systemd[1]: Listening on Journal Socket (/dev/log).
[ 19.017869] systemd[1]: Listening on Journal Audit Socket.
[ 19.040873] systemd[1]: Listening on Syslog Socket.
[ 19.062910] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 19.195025] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 19.216940] Loading iSCSI transport class v2.0-870.
[ 19.233798] iscsi: registered transport (tcp)
[ 19.256694] iscsi: registered transport (iser)
[ 19.351868] RPC: Registered named UNIX socket transport module.
[ 19.351869] RPC: Registered udp transport module.
[ 19.351869] RPC: Registered tcp transport module.
[ 19.351870] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.456802] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.682935] systemd-journald[829]: Received request to flush runtime journal from PID 1
[ 19.890874] ioatdma: Intel(R) QuickData Technology Driver 5.00
[ 19.891036] ioatdma 0000:00:04.0: enabling device (0000 -> 0002)
[ 19.907156] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 19.914652] igb 0000:07:00.0: DCA enabled
[ 19.915230] igb 0000:07:00.1: DCA enabled
[ 19.915476] ioatdma 0000:00:04.1: enabling device (0000 -> 0002)
[ 19.936731] ioatdma 0000:00:04.2: enabling device (0000 -> 0002)
[ 19.957519] ioatdma 0000:00:04.3: enabling device (0000 -> 0002)
[ 19.976914] ioatdma 0000:00:04.4: enabling device (0000 -> 0002)
[ 19.991999] pstore: ignoring unexpected backend 'efi'
[ 19.992326] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 19.993551] cdc_acm 2-1.7:1.0: ttyACM0: USB ACM device
[ 19.994100] usbcore: registered new interface driver cdc_acm
[ 19.994101] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 19.994355] IPMI message handler: version 39.2
[ 19.995876] ipmi device interface
[ 19.997080] ioatdma 0000:00:04.5: enabling device (0000 -> 0002)
[ 19.998458] ipmi_si: IPMI System Interface driver
[ 19.998488] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 19.998492] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 19.998493] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 19.998733] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 20.013020] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 20.013021] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 20.013022] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 20.013022] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ 20.017607] ioatdma 0000:00:04.6: enabling device (0000 -> 0002)
[ 20.045013] ioatdma 0000:00:04.7: enabling device (0000 -> 0002)
[ 20.074521] ioatdma 0000:80:04.0: enabling device (0000 -> 0002)
[ 20.096554] ioatdma 0000:80:04.1: enabling device (0000 -> 0002)
[ 20.120546] ioatdma 0000:80:04.2: enabling device (0000 -> 0002)
[ 20.136094] ioatdma 0000:80:04.3: enabling device (0000 -> 0002)
[ 20.152451] ioatdma 0000:80:04.4: enabling device (0000 -> 0002)
[ 20.153960] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 20.153987] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 20.154001] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 20.154010] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 20.154017] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 20.154023] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 20.154025] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[ 20.154032] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[ 20.154038] EDAC sbridge: Seeking for: PCI ID 8086:3c71
[ 20.154040] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[ 20.154048] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[ 20.154053] EDAC sbridge: Seeking for: PCI ID 8086:3caa
[ 20.154055] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[ 20.154062] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[ 20.154068] EDAC sbridge: Seeking for: PCI ID 8086:3cab
[ 20.154070] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[ 20.154077] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[ 20.154082] EDAC sbridge: Seeking for: PCI ID 8086:3cac
[ 20.154084] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[ 20.154092] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[ 20.154098] EDAC sbridge: Seeking for: PCI ID 8086:3cad
[ 20.154100] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[ 20.154108] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[ 20.154116] EDAC sbridge: Seeking for: PCI ID 8086:3cb8
[ 20.154117] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[ 20.154123] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[ 20.154128] EDAC sbridge: Seeking for: PCI ID 8086:3cf4
[ 20.154131] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[ 20.154137] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[ 20.154142] EDAC sbridge: Seeking for: PCI ID 8086:3cf6
[ 20.154145] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[ 20.154152] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[ 20.154157] EDAC sbridge: Seeking for: PCI ID 8086:3cf5
[ 20.154288] EDAC MC0: Giving out device to module sb_edac controller Sandy Bridge SrcID#0_Ha#0: DEV 0000:7f:0e.0 (INTERRUPT)
[ 20.154449] EDAC MC1: Giving out device to module sb_edac controller Sandy Bridge SrcID#1_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
[ 20.154449] EDAC sbridge: Ver: 1.1.2
[ 20.169372] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x000157, prod_id: 0x004a, dev_id: 0x21)
[ 20.170249] ioatdma 0000:80:04.5: enabling device (0000 -> 0002)
[ 20.186909] ioatdma 0000:80:04.6: enabling device (0000 -> 0002)
[ 20.188474] intel_rapl_common: Found RAPL domain package
[ 20.188476] intel_rapl_common: Found RAPL domain core
[ 20.188478] intel_rapl_common: Found RAPL domain dram
[ 20.199389] intel_rapl_common: Found RAPL domain package
[ 20.199391] intel_rapl_common: Found RAPL domain core
[ 20.199395] intel_rapl_common: Found RAPL domain dram
[ 20.203299] ioatdma 0000:80:04.7: enabling device (0000 -> 0002)
[ 20.210165] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
[ 20.217551] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 20.513205] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 51.112853] random: crng init done
[ 51.112855] random: 5 urandom warning(s) missed due to ratelimiting
[ 109.482430] bonding: bond0 is being created...
[ 109.578079] mlx4_en: eth40a: Steering Mode 1
[ 109.635667] mlx4_en: eth40b: Steering Mode 1
[ 109.777697] mlx4_en: eth40b: Close port called
[ 109.814320] mlx4_en: eth40b: Link Down
[ 109.818785] mlx4_en: eth40a: Close port called
[ 109.854714] mlx4_en: eth40a: Link Down
[ 109.863377] mlx4_en: eth40b: Steering Mode 1
[ 109.883468] bond0: (slave eth40b): Enslaving as a backup interface with a down link
[ 109.895073] mlx4_en: eth40a: Steering Mode 1
[ 109.918167] bond0: (slave eth40a): Enslaving as a backup interface with a down link
[ 109.931292] <mlx4_ib> mlx4_ib_add: counter index 4 for port 1 allocated 1
[ 112.123415] mlx4_en: eth40b: Link Up
[ 112.178323] mlx4_en: eth40a: Link Up
[ 112.191198] bond0: (slave eth40b): link status up, enabling it in 0 ms
[ 112.191200] bond0: (slave eth40a): link status up, enabling it in 200 ms
[ 112.191915] bond0: (slave eth40b): link status definitely up, 40000 Mbps full duplex
[ 112.191917] bond0: (slave eth40b): making interface the new active one
[ 112.192026] bond0: active interface up!
[ 112.192027] bond0: (slave eth40a): invalid new link 3 on slave
[ 112.204618] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 112.411644] bond0: (slave eth40a): link status definitely up, 40000 Mbps full duplex
[ 113.255588] igb 0000:07:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 113.255794] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 119.153861] NFSD: Using UMH upcall client tracking operations.
[ 119.153864] NFSD: starting 90-second grace period (net f00000a8)
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Bug 209177 - mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
[not found] ` <CALnajPBXsXgqWOth+ABF_HgLVPjQSESZ1w-wwmNZnvbaXfgsUQ@mail.gmail.com>
@ 2020-09-29 15:04 ` Suganath Prabu Subramani
2020-09-29 20:04 ` Sundar Nagarajan
0 siblings, 1 reply; 5+ messages in thread
From: Suganath Prabu Subramani @ 2020-09-29 15:04 UTC (permalink / raw)
To: Sundar Nagarajan
Cc: linux-scsi, Sathya Prakash Veerichetty, Sreekanth Reddy,
James E.J. Bottomley, Martin K. Petersen, PDL-MPT-FUSIONLINUX
[-- Attachment #1: Type: text/plain, Size: 2837 bytes --]
Hi Sundar,
Please check if below two patches are available in the mpt3sas driver
you are using.
If you are seeing issues with these patches applied (Or) If your
driver is already having mentioned patches, provide us driver log with
"mpt3sas.logging_level=0x3f8”.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=61e6ba03ea26f0205e535862009ff6ffdbf4de0c
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/mpt3sas?h=v5.9-rc4&id=f56577e8c7d0f3054f97d1f0d1cbe9a4d179cc47
I could see these patches in 5.8.12
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/scsi/mpt3sas/mpt3sas_base.c?h=v5.8.12.
Thanks,
Suganath
On Tue, Sep 29, 2020 at 4:18 PM Sundar Nagarajan
<sun.nagarajan@gmail.com> wrote:
>
> Sorry if I am mailing too many people.
> Copying additional people in the hope that someone has the time to guide me on how to report, debug and fix this bug in the 5.8 kernel.
>
> bugzilla.kernel org bug report:
> https://bugzilla.kernel.org/show_bug.cgi?id=209177
>
>
>
>
> On Tue, Sep 22, 2020 at 7:08 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
>>
>> Any guidance on how I should go about trying with the 35.100.00.00 driver?
>> In particular:
>>
>> Which patch do I apply?
>> Which kernel version do I apply the patch to?
>>
>> Regards,
>> Sundar
>>
>>
>> On Thu, Sep 10, 2020 at 10:51 PM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
>>>
>>> Hi Suganath,
>>>
>>> Thank you for the quick reply.
>>>
>>> I am a bit of a newbie in pllying linux kernel patches etc.
>>>
>>> Would I apply this patch to the stock (5.8.8) kernel.org kernel:
>>> https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/commit/?h=5.10/scsi-queue
>>>
>>> Sundar
>>>
>>>
>>>
>>> On Thu, Sep 10, 2020 at 10:46 PM Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> wrote:
>>>>
>>>> Hi Sundar,
>>>>
>>>> Can you please try with the latest driver 35.100.00.00. => "https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/tree/?h=5.10/scsi-queue"
>>>> This has fixes related to "RDPQ" scsi: mpt3sas: Fix reply queue count in non RDPQ mode.
>>>> scsi: mpt3sas: Fix memset() in non-RDPQ mode.
>>>>
>>>> Thanks,
>>>> Suganath
>>>>
>>>> On Fri, Sep 11, 2020 at 10:00 AM Sundar Nagarajan <sun.nagarajan@gmail.com> wrote:
>>>>>
>>>>> I am new to reporting linux kernel bugs.
>>>>> Apologies if this is sent to you in error.
>>>>> I got your email using: `perl scripts/get_maintainer.pl -f
>>>>> drivers/scsi/mpt3sas/mpt3sas_scsih.c` as indicated in
>>>>> https://www.kernel.org/doc/html/latest/admin-guide/reporting-bugs.html
>>>>>
>>>>> bugzilla.kernel org bug report:
>>>>> https://bugzilla.kernel.org/show_bug.cgi?id=209177
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4202 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-09-30 18:58 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-29 10:53 Bug 209177 - mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()! Sundar Nagarajan
[not found] <CALnajPCsBkOnogZHF30g1XnAs6jLzGTQmsL4RyCA-ReHv=3ANQ@mail.gmail.com>
[not found] ` <CA+RiK648dzV=sAEV03VrpEmLoxZnHcBHkmUbP0Q3wdBvCQ6YGQ@mail.gmail.com>
[not found] ` <CALnajPDYZs+gPY8eN7thyYGyWu2j4W1uBN63LDyYwmjJtVb0vA@mail.gmail.com>
[not found] ` <CALnajPAXKzBCprU0s2i7XMtLaDDYqmUXf+9cRFzw_Z3Wjn14BA@mail.gmail.com>
[not found] ` <CALnajPBXsXgqWOth+ABF_HgLVPjQSESZ1w-wwmNZnvbaXfgsUQ@mail.gmail.com>
2020-09-29 15:04 ` Suganath Prabu Subramani
2020-09-29 20:04 ` Sundar Nagarajan
[not found] ` <CA+RiK65kPWbTHdKk_3qssEE75ZdihjiY8CMQc_T8f3c92DPDkg@mail.gmail.com>
2020-09-30 14:01 ` Suganath Prabu Subramani
2020-09-30 18:58 ` Sundar Nagarajan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.