From: Minkyu Kang <promsoft@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board
Date: Tue, 24 Jul 2012 11:38:21 +0900 [thread overview]
Message-ID: <CALrBrZ3dUQR3NAeC2s6jTNVbZaGQJ8_9KGfBA6Bwxn_AE1a46A@mail.gmail.com> (raw)
In-Reply-To: <1342195913-25161-15-git-send-email-bocui107@gmail.com>
Dear Zhong Hongbo,
On 14 July 2012 01:11, Zhong Hongbo <bocui107@gmail.com> wrote:
> From: Zhong Hongbo <bocui107@gmail.com>
>
> Signed-off-by: Zhong Hongbo <bocui107@gmail.com>
> ---
> Change for V2:
> - New.
> ---
> arch/arm/cpu/arm1176/s3c64xx/pwm.c | 2 +-
> arch/arm/cpu/arm1176/s3c64xx/reset.S | 2 +-
> arch/arm/cpu/arm1176/s3c64xx/speed.c | 2 +-
> arch/arm/cpu/arm1176/s3c64xx/srom.c | 2 +-
> arch/arm/cpu/arm1176/s3c64xx/timer.c | 2 +-
> arch/arm/include/asm/arch-s3c64xx/cpu.h | 83 ++++++++++++++++++++++++++
> arch/arm/include/asm/arch-s3c64xx/s3c6400.h | 84 ---------------------------
> board/samsung/smdk6400/lowlevel_init.S | 2 +-
> board/samsung/smdk6400/mem_init.S | 2 +-
> board/samsung/smdk6400/smdk6400.c | 2 +-
> drivers/mtd/nand/s3c64xx.c | 2 +-
> drivers/serial/s3c64xx.c | 2 +-
> drivers/usb/host/s3c64xx-hcd.c | 2 +-
> 13 files changed, 94 insertions(+), 95 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-s3c64xx/cpu.h
> delete mode 100644 arch/arm/include/asm/arch-s3c64xx/s3c6400.h
>
> diff --git a/arch/arm/cpu/arm1176/s3c64xx/pwm.c b/arch/arm/cpu/arm1176/s3c64xx/pwm.c
> index d1d70ff..02822fc 100644
> --- a/arch/arm/cpu/arm1176/s3c64xx/pwm.c
> +++ b/arch/arm/cpu/arm1176/s3c64xx/pwm.c
> @@ -28,7 +28,7 @@
> #include <errno.h>
> #include <pwm.h>
> #include <asm/io.h>
> -#include <asm/arch/s3c6400.h>
> +#include <asm/arch/cpu.h>
> #include <asm/arch/pwm.h>
>
> int pwm_enable(int pwm_id)
> diff --git a/arch/arm/cpu/arm1176/s3c64xx/reset.S b/arch/arm/cpu/arm1176/s3c64xx/reset.S
> index 9e5ee84..ee96d6c 100644
> --- a/arch/arm/cpu/arm1176/s3c64xx/reset.S
> +++ b/arch/arm/cpu/arm1176/s3c64xx/reset.S
> @@ -21,7 +21,7 @@
> * MA 02111-1307 USA
> */
>
> -#include <asm/arch/s3c6400.h>
> +#include <asm/arch/cpu.h>
>
> .globl reset_cpu
> reset_cpu:
> diff --git a/arch/arm/cpu/arm1176/s3c64xx/speed.c b/arch/arm/cpu/arm1176/s3c64xx/speed.c
> index 05b44b9..5e68090 100644
> --- a/arch/arm/cpu/arm1176/s3c64xx/speed.c
> +++ b/arch/arm/cpu/arm1176/s3c64xx/speed.c
> @@ -32,7 +32,7 @@
>
> #include <common.h>
> #include <asm/io.h>
> -#include <asm/arch/s3c6400.h>
> +#include <asm/arch/cpu.h>
> #include <asm/arch/clock.h>
>
> #define APLL 0
> diff --git a/arch/arm/cpu/arm1176/s3c64xx/srom.c b/arch/arm/cpu/arm1176/s3c64xx/srom.c
> index f1b2b34..92fb7af 100644
> --- a/arch/arm/cpu/arm1176/s3c64xx/srom.c
> +++ b/arch/arm/cpu/arm1176/s3c64xx/srom.c
> @@ -25,7 +25,7 @@
> #include <common.h>
> #include <asm/io.h>
> #include <asm/arch/sromc.h>
> -#include <asm/arch/s3c6400.h>
> +#include <asm/arch/cpu.h>
> /*
> * s3c64xx_config_sromc() - select the proper SROMC Bank and configure the
> * band width control and bank control registers
> diff --git a/arch/arm/cpu/arm1176/s3c64xx/timer.c b/arch/arm/cpu/arm1176/s3c64xx/timer.c
> index 47d7731..eebd0c0 100644
> --- a/arch/arm/cpu/arm1176/s3c64xx/timer.c
> +++ b/arch/arm/cpu/arm1176/s3c64xx/timer.c
> @@ -25,7 +25,7 @@
>
> #include <common.h>
> #include <asm/io.h>
> -#include <asm/arch/s3c6400.h>
> +#include <asm/arch/cpu.h>
> #include <asm/arch/pwm.h>
> #include <pwm.h>
>
> diff --git a/arch/arm/include/asm/arch-s3c64xx/cpu.h b/arch/arm/include/asm/arch-s3c64xx/cpu.h
> new file mode 100644
> index 0000000..5c8dd9d
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-s3c64xx/cpu.h
> @@ -0,0 +1,83 @@
> +/*
> + * (C) Copyright 2007
> + * Byungjae Lee, Samsung Erectronics, bjlee at samsung.com.
> + * - only support for S3C6400
> + *
> + * (C) Copyright 2008
> + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +/************************************************
> + * NAME : s3c64XX.h
> + *
> + * Based on S3C64XX User's manual Rev 0.0
> + ************************************************/
> +
> +#ifndef __ASM_ARCH_CPU_H__
> +#define __ASM_ARCH_CPU_H__
> +
> +#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400)
> +#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration!
> +#endif
> +
> +#define S3C64XX_UART_CHANNELS 3
> +#define S3C64XX_SPI_CHANNELS 2
> +
> +#include <asm/hardware.h>
> +
> +#define ELFIN_CLOCK_POWER_BASE 0x7e00f000
> +#define ELFIN_GPIO_BASE 0x7f008000
> +#define ELFIN_SROM_BASE 0x70000000
> +#define ELFIN_DMC0_BASE 0x7e000000
> +#define ELFIN_DMC1_BASE 0x7e001000
> +#define ELFIN_MEM_SYS_CFG 0x7e00f120
> +#define ELFIN_NAND_BASE 0x70200000
> +#define ELFIN_VIC0_BASE_ADDR 0x71200000
> +#define ELFIN_VIC1_BASE_ADDR 0x71300000
> +#define ELFIN_WATCHDOG_BASE 0x7E004000
> +#define ELFIN_UART_BASE 0x7F005000
> +#define ELFIN_TIMER_BASE 0x7F006000
I have question.
What is the ELFIN?
I think we can make the naming to S3C64XX_...
> +
> +#ifndef __ASSEMBLY__
> +static inline unsigned int s3c64xx_get_base_uart(void)
> +{
> + return ELFIN_UART_BASE;
> +}
> +
> +static inline unsigned int s3c64xx_get_base_nand(void)
> +{
> + return ELFIN_NAND_BASE;
> +}
> +
> +static inline unsigned int s3c64xx_get_base_timer(void)
> +{
> + return ELFIN_TIMER_BASE;
> +}
> +
> +static inline unsigned int s3c64xx_get_base_clock(void)
> +{
> + return ELFIN_CLOCK_POWER_BASE;
> +}
> +
> +static inline unsigned int s3c64xx_get_base_sromc(void)
> +{
> + return ELFIN_SROM_BASE;
> +}
> +#endif
> +
> +#endif /*__S3C6400_H__*/
__CPU__H__?
Thanks.
Minkyu Kang.
--
from. prom.
www.promsoft.net
next prev parent reply other threads:[~2012-07-24 2:38 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-13 16:11 [U-Boot] V2 S3c64xx: Switch all I/O to use readl/writel functio and Clear variable Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 01/15] SMDK6400: Move smdk6400 board from Makefile to boards.cfg Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 02/15] S3C64XX: Switch to use readl/writel to operate nand flash Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 03/15] S3C64XX: Use readl/writel to operate uart Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] =?yes?q?=5BV2=2004/15=5D=20S3C64XX=3A=20add=20pwm=20for=20s3c64xx=20support?= Zhong Hongbo
2012-07-13 16:21 ` [U-Boot] [V2 04/15] S3C64XX: add pwm for s3c64xx support Zhong Hongbo
2012-07-19 22:04 ` Zhong Hongbo
2012-07-20 3:14 ` Minkyu Kang
2012-07-13 16:11 ` [U-Boot] [V2 05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 06/15] S3C64xx: mov cpu_init.S to the board directory Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 07/15] S3C6400: Delete nand_spl for S3C6400 Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 09/15] arm1176: Fixed No relocation Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 10/15] S3C64XX: Change SROM init to use read/write operation Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 11/15] S3C64XX: Switch to use read/writel to operation clock system Zhong Hongbo
2012-07-24 8:58 ` Minkyu Kang
2012-07-24 14:40 ` Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable Zhong Hongbo
2012-07-24 8:47 ` Minkyu Kang
2012-07-13 16:11 ` [U-Boot] [V2 13/15] S3C6400: clear memory init variable Zhong Hongbo
2012-07-24 8:44 ` Minkyu Kang
2012-07-13 16:11 ` [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board Zhong Hongbo
2012-07-24 2:38 ` Minkyu Kang [this message]
2012-07-24 14:45 ` Zhong Hongbo
2012-07-13 16:11 ` [U-Boot] [V2 15/15] S3C6400: Remove the unused variable for S3C6400 Zhong Hongbo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALrBrZ3dUQR3NAeC2s6jTNVbZaGQJ8_9KGfBA6Bwxn_AE1a46A@mail.gmail.com \
--to=promsoft@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.