* amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-02 18:50 ` Davide Corrado
0 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-02 18:50 UTC (permalink / raw)
To: alexander.deucher
Cc: airlied, linux-kernel, dri-devel, amd-gfx, daniel, christian.koenig
[-- Attachment #1.1: Type: text/plain, Size: 1482 bytes --]
hello, I'd like to report this issue that I am having since I updated my
display (samsung U28E590). The amdgpu does not support the native
resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
connection (I tried both, same results), the maximum supported refresh is
30Hz, so I'm stuck with that (don't have a displayport). The radeon module
works fine, I'm having this issue just when I use amdgpu (which I'd like
to, because performance is better).
Some info of my hardware:
cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
kernel version (I tried different ones and different linux distros, same
results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
x86_64 x86_64 x86_64 GNU/Linux
Monitor: Samsung U28E590.
description:
If I boot the system using amdgpu and no video mode selection, the system
boots but I don't get a screen during boot and in wayland. I can connect
using ssh, so the system is running fine, just no display; If I force a
full HD resolution with "video:" in the kernel line, I can see the boot
process but the screen disappears when wayland starts (because the default
resolution is 3840x2160@30Hz). Using a full HD monitor results in no
issues, so it must be related to this very 4k resolution.
As I have already stated, radeon module works with the same
software/hardware configuration.
thanks you so much for your time :-)
--
Davide Corrado
UNIX Team Leader
Via Abramo Lincoln, 25
20129 Milano
Tel +39 3474259950
[-- Attachment #1.2: Type: text/html, Size: 1974 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-02 18:50 ` Davide Corrado
@ 2021-01-03 11:07 ` Mike Lothian
-1 siblings, 0 replies; 18+ messages in thread
From: Mike Lothian @ 2021-01-03 11:07 UTC (permalink / raw)
To: Davide Corrado
Cc: amd-gfx list, Linux Kernel Mailing List, Maling list - DRI developers
[-- Attachment #1.1: Type: text/plain, Size: 2017 bytes --]
Hi
You're probably best reporting the bug here:
https://gitlab.freedesktop.org/drm/amd/-/issues
Attach the output of dmesg from both Radeon and AMDGPU and the compositor /
Wayland logs (as you're not using X)
Cheers
Mike
On Sun, 3 Jan 2021, 06:32 Davide Corrado, <davide@davidecorrado.eu> wrote:
> hello, I'd like to report this issue that I am having since I updated my
> display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
> connection (I tried both, same results), the maximum supported refresh is
> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
> works fine, I'm having this issue just when I use amdgpu (which I'd like
> to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros, same
> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
> x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the system
> boots but I don't get a screen during boot and in wayland. I can connect
> using ssh, so the system is running fine, just no display; If I force a
> full HD resolution with "video:" in the kernel line, I can see the boot
> process but the screen disappears when wayland starts (because the default
> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
> issues, so it must be related to this very 4k resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>
[-- Attachment #1.2: Type: text/html, Size: 3241 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-03 11:07 ` Mike Lothian
0 siblings, 0 replies; 18+ messages in thread
From: Mike Lothian @ 2021-01-03 11:07 UTC (permalink / raw)
To: Davide Corrado
Cc: amd-gfx list, Linux Kernel Mailing List, Maling list - DRI developers
[-- Attachment #1.1: Type: text/plain, Size: 2017 bytes --]
Hi
You're probably best reporting the bug here:
https://gitlab.freedesktop.org/drm/amd/-/issues
Attach the output of dmesg from both Radeon and AMDGPU and the compositor /
Wayland logs (as you're not using X)
Cheers
Mike
On Sun, 3 Jan 2021, 06:32 Davide Corrado, <davide@davidecorrado.eu> wrote:
> hello, I'd like to report this issue that I am having since I updated my
> display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
> connection (I tried both, same results), the maximum supported refresh is
> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
> works fine, I'm having this issue just when I use amdgpu (which I'd like
> to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros, same
> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
> x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the system
> boots but I don't get a screen during boot and in wayland. I can connect
> using ssh, so the system is running fine, just no display; If I force a
> full HD resolution with "video:" in the kernel line, I can see the boot
> process but the screen disappears when wayland starts (because the default
> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
> issues, so it must be related to this very 4k resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>
[-- Attachment #1.2: Type: text/html, Size: 3241 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-03 11:07 ` Mike Lothian
@ 2021-01-03 11:15 ` Davide Corrado
-1 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-03 11:15 UTC (permalink / raw)
To: Mike Lothian
Cc: amd-gfx list, Linux Kernel Mailing List, Maling list - DRI developers
[-- Attachment #1.1: Type: text/plain, Size: 2174 bytes --]
Cool, thanks!
Il Dom 3 Gen 2021, 12:06 Mike Lothian <mike@fireburn.co.uk> ha scritto:
> Hi
>
> You're probably best reporting the bug here:
>
> https://gitlab.freedesktop.org/drm/amd/-/issues
>
> Attach the output of dmesg from both Radeon and AMDGPU and the compositor
> / Wayland logs (as you're not using X)
>
> Cheers
>
> Mike
>
>
>
> On Sun, 3 Jan 2021, 06:32 Davide Corrado, <davide@davidecorrado.eu> wrote:
>
>> hello, I'd like to report this issue that I am having since I updated my
>> display (samsung U28E590). The amdgpu does not support the native
>> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
>> connection (I tried both, same results), the maximum supported refresh is
>> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
>> works fine, I'm having this issue just when I use amdgpu (which I'd like
>> to, because performance is better).
>>
>> Some info of my hardware:
>>
>> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
>> kernel version (I tried different ones and different linux distros, same
>> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
>> x86_64 x86_64 x86_64 GNU/Linux
>> Monitor: Samsung U28E590.
>>
>> description:
>> If I boot the system using amdgpu and no video mode selection, the system
>> boots but I don't get a screen during boot and in wayland. I can connect
>> using ssh, so the system is running fine, just no display; If I force a
>> full HD resolution with "video:" in the kernel line, I can see the boot
>> process but the screen disappears when wayland starts (because the default
>> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
>> issues, so it must be related to this very 4k resolution.
>>
>> As I have already stated, radeon module works with the same
>> software/hardware configuration.
>> thanks you so much for your time :-)
>>
>> --
>> Davide Corrado
>> UNIX Team Leader
>>
>> Via Abramo Lincoln, 25
>> 20129 Milano
>>
>> Tel +39 3474259950
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>>
>
[-- Attachment #1.2: Type: text/html, Size: 3680 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-03 11:15 ` Davide Corrado
0 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-03 11:15 UTC (permalink / raw)
To: Mike Lothian
Cc: amd-gfx list, Linux Kernel Mailing List, Maling list - DRI developers
[-- Attachment #1.1: Type: text/plain, Size: 2174 bytes --]
Cool, thanks!
Il Dom 3 Gen 2021, 12:06 Mike Lothian <mike@fireburn.co.uk> ha scritto:
> Hi
>
> You're probably best reporting the bug here:
>
> https://gitlab.freedesktop.org/drm/amd/-/issues
>
> Attach the output of dmesg from both Radeon and AMDGPU and the compositor
> / Wayland logs (as you're not using X)
>
> Cheers
>
> Mike
>
>
>
> On Sun, 3 Jan 2021, 06:32 Davide Corrado, <davide@davidecorrado.eu> wrote:
>
>> hello, I'd like to report this issue that I am having since I updated my
>> display (samsung U28E590). The amdgpu does not support the native
>> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
>> connection (I tried both, same results), the maximum supported refresh is
>> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
>> works fine, I'm having this issue just when I use amdgpu (which I'd like
>> to, because performance is better).
>>
>> Some info of my hardware:
>>
>> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
>> kernel version (I tried different ones and different linux distros, same
>> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
>> x86_64 x86_64 x86_64 GNU/Linux
>> Monitor: Samsung U28E590.
>>
>> description:
>> If I boot the system using amdgpu and no video mode selection, the system
>> boots but I don't get a screen during boot and in wayland. I can connect
>> using ssh, so the system is running fine, just no display; If I force a
>> full HD resolution with "video:" in the kernel line, I can see the boot
>> process but the screen disappears when wayland starts (because the default
>> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
>> issues, so it must be related to this very 4k resolution.
>>
>> As I have already stated, radeon module works with the same
>> software/hardware configuration.
>> thanks you so much for your time :-)
>>
>> --
>> Davide Corrado
>> UNIX Team Leader
>>
>> Via Abramo Lincoln, 25
>> 20129 Milano
>>
>> Tel +39 3474259950
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>>
>
[-- Attachment #1.2: Type: text/html, Size: 3680 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-02 18:50 ` Davide Corrado
@ 2021-01-04 11:10 ` Christian König
-1 siblings, 0 replies; 18+ messages in thread
From: Christian König @ 2021-01-04 11:10 UTC (permalink / raw)
To: Davide Corrado, alexander.deucher
Cc: airlied, linux-kernel, amd-gfx, Kazlauskas, Nicholas,
Leo (Sunpeng) Li, dri-devel, christian.koenig
[-- Attachment #1.1: Type: text/plain, Size: 2421 bytes --]
Hi Davide,
adding a few of our AMD display people.
In general as already suggested by others opening a bug report to track
this is the right thing to do.
In the past we had a few bug reports like this because amdgpu is more
strict in checking hardware limitations.
For example it can be that your HDMI port on the board can only handle a
certain maximum pixel clock, but radeon is ignoring this while amdgpu isn't.
What you can try to do is to manually override the used mode, e.g. copy
the modeline used when radeon is active and manually add that using
xrandr when amdgpu is active and see if it works or not.
Regards,
Christian.
Am 02.01.21 um 19:50 schrieb Davide Corrado:
> hello, I'd like to report this issue that I am having since I updated
> my display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160/./ Using a HDMI or
> DVI connection (I tried both, same results), the maximum supported
> refresh is 30Hz, so I'm stuck with that (don't have a displayport).
> The radeon module works fine, I'm having this issue just when I use
> amdgpu (which I'd like to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros,
> same results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC
> 2020 x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the
> system boots but I don't get a screen during boot and in wayland. I
> can connect using ssh, so the system is running fine, just no display;
> If I force a full HD resolution with "video:" in the kernel line, I
> can see the boot process but the screen disappears when wayland starts
> (because the default resolution is 3840x2160@30Hz). Using a full HD
> monitor results in no issues, so it must be related to this very 4k
> resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[-- Attachment #1.2: Type: text/html, Size: 4637 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-04 11:10 ` Christian König
0 siblings, 0 replies; 18+ messages in thread
From: Christian König @ 2021-01-04 11:10 UTC (permalink / raw)
To: Davide Corrado, alexander.deucher
Cc: airlied, linux-kernel, amd-gfx, Kazlauskas, Nicholas,
Leo (Sunpeng) Li, dri-devel, daniel, Wentland, Harry,
christian.koenig
[-- Attachment #1.1: Type: text/plain, Size: 2421 bytes --]
Hi Davide,
adding a few of our AMD display people.
In general as already suggested by others opening a bug report to track
this is the right thing to do.
In the past we had a few bug reports like this because amdgpu is more
strict in checking hardware limitations.
For example it can be that your HDMI port on the board can only handle a
certain maximum pixel clock, but radeon is ignoring this while amdgpu isn't.
What you can try to do is to manually override the used mode, e.g. copy
the modeline used when radeon is active and manually add that using
xrandr when amdgpu is active and see if it works or not.
Regards,
Christian.
Am 02.01.21 um 19:50 schrieb Davide Corrado:
> hello, I'd like to report this issue that I am having since I updated
> my display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160/./ Using a HDMI or
> DVI connection (I tried both, same results), the maximum supported
> refresh is 30Hz, so I'm stuck with that (don't have a displayport).
> The radeon module works fine, I'm having this issue just when I use
> amdgpu (which I'd like to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros,
> same results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC
> 2020 x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the
> system boots but I don't get a screen during boot and in wayland. I
> can connect using ssh, so the system is running fine, just no display;
> If I force a full HD resolution with "video:" in the kernel line, I
> can see the boot process but the screen disappears when wayland starts
> (because the default resolution is 3840x2160@30Hz). Using a full HD
> monitor results in no issues, so it must be related to this very 4k
> resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[-- Attachment #1.2: Type: text/html, Size: 4637 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-04 11:10 ` Christian König
@ 2021-01-04 12:04 ` Davide Corrado
-1 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-04 12:04 UTC (permalink / raw)
To: christian.koenig
Cc: airlied, linux-kernel, amd-gfx, Leo (Sunpeng) Li, dri-devel,
alexander.deucher, Kazlauskas, Nicholas
[-- Attachment #1.1: Type: text/plain, Size: 2712 bytes --]
Hello. This resolution is supported by the Apu and the motherboard specs.
Will try what you suggest and let you know
Il Lun 4 Gen 2021, 12:10 Christian König <ckoenig.leichtzumerken@gmail.com>
ha scritto:
> Hi Davide,
>
> adding a few of our AMD display people.
>
> In general as already suggested by others opening a bug report to track
> this is the right thing to do.
>
> In the past we had a few bug reports like this because amdgpu is more
> strict in checking hardware limitations.
>
> For example it can be that your HDMI port on the board can only handle a
> certain maximum pixel clock, but radeon is ignoring this while amdgpu isn't.
>
> What you can try to do is to manually override the used mode, e.g. copy
> the modeline used when radeon is active and manually add that using xrandr
> when amdgpu is active and see if it works or not.
>
> Regards,
> Christian.
>
> Am 02.01.21 um 19:50 schrieb Davide Corrado:
>
> hello, I'd like to report this issue that I am having since I updated my
> display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
> connection (I tried both, same results), the maximum supported refresh is
> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
> works fine, I'm having this issue just when I use amdgpu (which I'd like
> to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros, same
> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
> x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the system
> boots but I don't get a screen during boot and in wayland. I can connect
> using ssh, so the system is running fine, just no display; If I force a
> full HD resolution with "video:" in the kernel line, I can see the boot
> process but the screen disappears when wayland starts (because the default
> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
> issues, so it must be related to this very 4k resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
>
> _______________________________________________
> amd-gfx mailing listamd-gfx@lists.freedesktop.orghttps://lists.freedesktop.org/mailman/listinfo/amd-gfx
>
>
>
[-- Attachment #1.2: Type: text/html, Size: 4909 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-04 12:04 ` Davide Corrado
0 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-04 12:04 UTC (permalink / raw)
To: christian.koenig
Cc: airlied, linux-kernel, amd-gfx, Leo (Sunpeng) Li, dri-devel,
daniel, alexander.deucher, Wentland, Harry, Kazlauskas, Nicholas
[-- Attachment #1.1: Type: text/plain, Size: 2712 bytes --]
Hello. This resolution is supported by the Apu and the motherboard specs.
Will try what you suggest and let you know
Il Lun 4 Gen 2021, 12:10 Christian König <ckoenig.leichtzumerken@gmail.com>
ha scritto:
> Hi Davide,
>
> adding a few of our AMD display people.
>
> In general as already suggested by others opening a bug report to track
> this is the right thing to do.
>
> In the past we had a few bug reports like this because amdgpu is more
> strict in checking hardware limitations.
>
> For example it can be that your HDMI port on the board can only handle a
> certain maximum pixel clock, but radeon is ignoring this while amdgpu isn't.
>
> What you can try to do is to manually override the used mode, e.g. copy
> the modeline used when radeon is active and manually add that using xrandr
> when amdgpu is active and see if it works or not.
>
> Regards,
> Christian.
>
> Am 02.01.21 um 19:50 schrieb Davide Corrado:
>
> hello, I'd like to report this issue that I am having since I updated my
> display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
> connection (I tried both, same results), the maximum supported refresh is
> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
> works fine, I'm having this issue just when I use amdgpu (which I'd like
> to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros, same
> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
> x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the system
> boots but I don't get a screen during boot and in wayland. I can connect
> using ssh, so the system is running fine, just no display; If I force a
> full HD resolution with "video:" in the kernel line, I can see the boot
> process but the screen disappears when wayland starts (because the default
> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
> issues, so it must be related to this very 4k resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
>
> _______________________________________________
> amd-gfx mailing listamd-gfx@lists.freedesktop.orghttps://lists.freedesktop.org/mailman/listinfo/amd-gfx
>
>
>
[-- Attachment #1.2: Type: text/html, Size: 4909 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-04 12:04 ` Davide Corrado
@ 2021-01-04 12:37 ` Davide Corrado
-1 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-04 12:37 UTC (permalink / raw)
To: christian.koenig
Cc: airlied, linux-kernel, amd-gfx, Leo (Sunpeng) Li, dri-devel,
alexander.deucher, Kazlauskas, Nicholas
[-- Attachment #1.1: Type: text/plain, Size: 2942 bytes --]
Btw, should the driver switch to the lower supported resolution then?
Il Lun 4 Gen 2021, 13:04 Davide Corrado <davide@davidecorrado.eu> ha
scritto:
> Hello. This resolution is supported by the Apu and the motherboard specs.
> Will try what you suggest and let you know
>
> Il Lun 4 Gen 2021, 12:10 Christian König <ckoenig.leichtzumerken@gmail.com>
> ha scritto:
>
>> Hi Davide,
>>
>> adding a few of our AMD display people.
>>
>> In general as already suggested by others opening a bug report to track
>> this is the right thing to do.
>>
>> In the past we had a few bug reports like this because amdgpu is more
>> strict in checking hardware limitations.
>>
>> For example it can be that your HDMI port on the board can only handle a
>> certain maximum pixel clock, but radeon is ignoring this while amdgpu isn't.
>>
>> What you can try to do is to manually override the used mode, e.g. copy
>> the modeline used when radeon is active and manually add that using xrandr
>> when amdgpu is active and see if it works or not.
>>
>> Regards,
>> Christian.
>>
>> Am 02.01.21 um 19:50 schrieb Davide Corrado:
>>
>> hello, I'd like to report this issue that I am having since I updated my
>> display (samsung U28E590). The amdgpu does not support the native
>> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
>> connection (I tried both, same results), the maximum supported refresh is
>> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
>> works fine, I'm having this issue just when I use amdgpu (which I'd like
>> to, because performance is better).
>>
>> Some info of my hardware:
>>
>> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
>> kernel version (I tried different ones and different linux distros, same
>> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
>> x86_64 x86_64 x86_64 GNU/Linux
>> Monitor: Samsung U28E590.
>>
>> description:
>> If I boot the system using amdgpu and no video mode selection, the system
>> boots but I don't get a screen during boot and in wayland. I can connect
>> using ssh, so the system is running fine, just no display; If I force a
>> full HD resolution with "video:" in the kernel line, I can see the boot
>> process but the screen disappears when wayland starts (because the default
>> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
>> issues, so it must be related to this very 4k resolution.
>>
>> As I have already stated, radeon module works with the same
>> software/hardware configuration.
>> thanks you so much for your time :-)
>>
>> --
>> Davide Corrado
>> UNIX Team Leader
>>
>> Via Abramo Lincoln, 25
>> 20129 Milano
>>
>> Tel +39 3474259950
>>
>> _______________________________________________
>> amd-gfx mailing listamd-gfx@lists.freedesktop.orghttps://lists.freedesktop.org/mailman/listinfo/amd-gfx
>>
>>
>>
[-- Attachment #1.2: Type: text/html, Size: 5379 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-04 12:37 ` Davide Corrado
0 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-04 12:37 UTC (permalink / raw)
To: christian.koenig
Cc: airlied, linux-kernel, amd-gfx, Leo (Sunpeng) Li, dri-devel,
daniel, alexander.deucher, Wentland, Harry, Kazlauskas, Nicholas
[-- Attachment #1.1: Type: text/plain, Size: 2942 bytes --]
Btw, should the driver switch to the lower supported resolution then?
Il Lun 4 Gen 2021, 13:04 Davide Corrado <davide@davidecorrado.eu> ha
scritto:
> Hello. This resolution is supported by the Apu and the motherboard specs.
> Will try what you suggest and let you know
>
> Il Lun 4 Gen 2021, 12:10 Christian König <ckoenig.leichtzumerken@gmail.com>
> ha scritto:
>
>> Hi Davide,
>>
>> adding a few of our AMD display people.
>>
>> In general as already suggested by others opening a bug report to track
>> this is the right thing to do.
>>
>> In the past we had a few bug reports like this because amdgpu is more
>> strict in checking hardware limitations.
>>
>> For example it can be that your HDMI port on the board can only handle a
>> certain maximum pixel clock, but radeon is ignoring this while amdgpu isn't.
>>
>> What you can try to do is to manually override the used mode, e.g. copy
>> the modeline used when radeon is active and manually add that using xrandr
>> when amdgpu is active and see if it works or not.
>>
>> Regards,
>> Christian.
>>
>> Am 02.01.21 um 19:50 schrieb Davide Corrado:
>>
>> hello, I'd like to report this issue that I am having since I updated my
>> display (samsung U28E590). The amdgpu does not support the native
>> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
>> connection (I tried both, same results), the maximum supported refresh is
>> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
>> works fine, I'm having this issue just when I use amdgpu (which I'd like
>> to, because performance is better).
>>
>> Some info of my hardware:
>>
>> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
>> kernel version (I tried different ones and different linux distros, same
>> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
>> x86_64 x86_64 x86_64 GNU/Linux
>> Monitor: Samsung U28E590.
>>
>> description:
>> If I boot the system using amdgpu and no video mode selection, the system
>> boots but I don't get a screen during boot and in wayland. I can connect
>> using ssh, so the system is running fine, just no display; If I force a
>> full HD resolution with "video:" in the kernel line, I can see the boot
>> process but the screen disappears when wayland starts (because the default
>> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
>> issues, so it must be related to this very 4k resolution.
>>
>> As I have already stated, radeon module works with the same
>> software/hardware configuration.
>> thanks you so much for your time :-)
>>
>> --
>> Davide Corrado
>> UNIX Team Leader
>>
>> Via Abramo Lincoln, 25
>> 20129 Milano
>>
>> Tel +39 3474259950
>>
>> _______________________________________________
>> amd-gfx mailing listamd-gfx@lists.freedesktop.orghttps://lists.freedesktop.org/mailman/listinfo/amd-gfx
>>
>>
>>
[-- Attachment #1.2: Type: text/html, Size: 5379 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-04 12:37 ` Davide Corrado
@ 2021-01-04 12:44 ` Christian König
-1 siblings, 0 replies; 18+ messages in thread
From: Christian König @ 2021-01-04 12:44 UTC (permalink / raw)
To: Davide Corrado
Cc: airlied, linux-kernel, amd-gfx, Leo (Sunpeng) Li, dri-devel,
alexander.deucher, Kazlauskas, Nicholas
[-- Attachment #1.1: Type: text/plain, Size: 4003 bytes --]
Yes, absolutely. Do you only get a black screen?
That would certainly be a rather big bug.
Christian.
Am 04.01.21 um 13:37 schrieb Davide Corrado:
> Btw, should the driver switch to the lower supported resolution then?
>
> Il Lun 4 Gen 2021, 13:04 Davide Corrado <davide@davidecorrado.eu
> <mailto:davide@davidecorrado.eu>> ha scritto:
>
> Hello. This resolution is supported by the Apu and the motherboard
> specs. Will try what you suggest and let you know
>
> Il Lun 4 Gen 2021, 12:10 Christian König
> <ckoenig.leichtzumerken@gmail.com
> <mailto:ckoenig.leichtzumerken@gmail.com>> ha scritto:
>
> Hi Davide,
>
> adding a few of our AMD display people.
>
> In general as already suggested by others opening a bug report
> to track this is the right thing to do.
>
> In the past we had a few bug reports like this because amdgpu
> is more strict in checking hardware limitations.
>
> For example it can be that your HDMI port on the board can
> only handle a certain maximum pixel clock, but radeon is
> ignoring this while amdgpu isn't.
>
> What you can try to do is to manually override the used mode,
> e.g. copy the modeline used when radeon is active and manually
> add that using xrandr when amdgpu is active and see if it
> works or not.
>
> Regards,
> Christian.
>
> Am 02.01.21 um 19:50 schrieb Davide Corrado:
>> hello, I'd like to report this issue that I am having since I
>> updated my display (samsung U28E590). The amdgpu does not
>> support the native resolution of my new monitor, which is
>> 3840x2160/./ Using a HDMI or DVI connection (I tried both,
>> same results), the maximum supported refresh is 30Hz, so I'm
>> stuck with that (don't have a displayport). The radeon module
>> works fine, I'm having this issue just when I use amdgpu
>> (which I'd like to, because performance is better).
>>
>> Some info of my hardware:
>>
>> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
>> kernel version (I tried different ones and different linux
>> distros, same results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon
>> Dec 21 14:08:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
>> Monitor: Samsung U28E590.
>>
>> description:
>> If I boot the system using amdgpu and no video mode
>> selection, the system boots but I don't get a screen during
>> boot and in wayland. I can connect using ssh, so the system
>> is running fine, just no display; If I force a full HD
>> resolution with "video:" in the kernel line, I can see the
>> boot process but the screen disappears when wayland starts
>> (because the default resolution is 3840x2160@30Hz). Using a
>> full HD monitor results in no issues, so it must be related
>> to this very 4k resolution.
>>
>> As I have already stated, radeon module works with the same
>> software/hardware configuration.
>> thanks you so much for your time :-)
>>
>> --
>> Davide Corrado
>> UNIX Team Leader
>>
>> Via Abramo Lincoln, 25
>> 20129 Milano
>>
>> Tel +39 3474259950
>>
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx@lists.freedesktop.org <mailto:amd-gfx@lists.freedesktop.org>
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=04%7C01%7Cchristian.koenig%40amd.com%7C59d6be6931904c8cc54608d8b0ad907d%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637453606812577161%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=WVyIYAbdsLrXtHu8TLObzx68cXuXoRkr5VPOPT6NwCQ%3D&reserved=0>
>
[-- Attachment #1.2: Type: text/html, Size: 8093 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-04 12:44 ` Christian König
0 siblings, 0 replies; 18+ messages in thread
From: Christian König @ 2021-01-04 12:44 UTC (permalink / raw)
To: Davide Corrado
Cc: airlied, linux-kernel, amd-gfx, Leo (Sunpeng) Li, dri-devel,
daniel, alexander.deucher, Wentland, Harry, Kazlauskas, Nicholas
[-- Attachment #1.1: Type: text/plain, Size: 4003 bytes --]
Yes, absolutely. Do you only get a black screen?
That would certainly be a rather big bug.
Christian.
Am 04.01.21 um 13:37 schrieb Davide Corrado:
> Btw, should the driver switch to the lower supported resolution then?
>
> Il Lun 4 Gen 2021, 13:04 Davide Corrado <davide@davidecorrado.eu
> <mailto:davide@davidecorrado.eu>> ha scritto:
>
> Hello. This resolution is supported by the Apu and the motherboard
> specs. Will try what you suggest and let you know
>
> Il Lun 4 Gen 2021, 12:10 Christian König
> <ckoenig.leichtzumerken@gmail.com
> <mailto:ckoenig.leichtzumerken@gmail.com>> ha scritto:
>
> Hi Davide,
>
> adding a few of our AMD display people.
>
> In general as already suggested by others opening a bug report
> to track this is the right thing to do.
>
> In the past we had a few bug reports like this because amdgpu
> is more strict in checking hardware limitations.
>
> For example it can be that your HDMI port on the board can
> only handle a certain maximum pixel clock, but radeon is
> ignoring this while amdgpu isn't.
>
> What you can try to do is to manually override the used mode,
> e.g. copy the modeline used when radeon is active and manually
> add that using xrandr when amdgpu is active and see if it
> works or not.
>
> Regards,
> Christian.
>
> Am 02.01.21 um 19:50 schrieb Davide Corrado:
>> hello, I'd like to report this issue that I am having since I
>> updated my display (samsung U28E590). The amdgpu does not
>> support the native resolution of my new monitor, which is
>> 3840x2160/./ Using a HDMI or DVI connection (I tried both,
>> same results), the maximum supported refresh is 30Hz, so I'm
>> stuck with that (don't have a displayport). The radeon module
>> works fine, I'm having this issue just when I use amdgpu
>> (which I'd like to, because performance is better).
>>
>> Some info of my hardware:
>>
>> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
>> kernel version (I tried different ones and different linux
>> distros, same results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon
>> Dec 21 14:08:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
>> Monitor: Samsung U28E590.
>>
>> description:
>> If I boot the system using amdgpu and no video mode
>> selection, the system boots but I don't get a screen during
>> boot and in wayland. I can connect using ssh, so the system
>> is running fine, just no display; If I force a full HD
>> resolution with "video:" in the kernel line, I can see the
>> boot process but the screen disappears when wayland starts
>> (because the default resolution is 3840x2160@30Hz). Using a
>> full HD monitor results in no issues, so it must be related
>> to this very 4k resolution.
>>
>> As I have already stated, radeon module works with the same
>> software/hardware configuration.
>> thanks you so much for your time :-)
>>
>> --
>> Davide Corrado
>> UNIX Team Leader
>>
>> Via Abramo Lincoln, 25
>> 20129 Milano
>>
>> Tel +39 3474259950
>>
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx@lists.freedesktop.org <mailto:amd-gfx@lists.freedesktop.org>
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=04%7C01%7Cchristian.koenig%40amd.com%7C59d6be6931904c8cc54608d8b0ad907d%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637453606812577161%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=WVyIYAbdsLrXtHu8TLObzx68cXuXoRkr5VPOPT6NwCQ%3D&reserved=0>
>
[-- Attachment #1.2: Type: text/html, Size: 8093 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-02 18:50 ` Davide Corrado
@ 2021-01-04 14:01 ` Deucher, Alexander
-1 siblings, 0 replies; 18+ messages in thread
From: Deucher, Alexander @ 2021-01-04 14:01 UTC (permalink / raw)
To: Davide Corrado
Cc: airlied, linux-kernel, dri-devel, amd-gfx, Koenig, Christian
[-- Attachment #1.1: Type: text/plain, Size: 2243 bytes --]
[AMD Official Use Only - Internal Distribution Only]
You might try enabling DC (the newer modesetting infrastructure). Append amdgpu.dc=1 to the kernel command line in grub.
Alex
________________________________
From: Davide Corrado <davide@davidecorrado.eu>
Sent: Saturday, January 2, 2021 1:50 PM
To: Deucher, Alexander <Alexander.Deucher@amd.com>
Cc: Koenig, Christian <Christian.Koenig@amd.com>; airlied@linux.ie <airlied@linux.ie>; daniel@ffwll.ch <daniel@ffwll.ch>; amd-gfx@lists.freedesktop.org <amd-gfx@lists.freedesktop.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Subject: amdgpu does not support 3840x2160@30Hz on kaveri apu
hello, I'd like to report this issue that I am having since I updated my display (samsung U28E590). The amdgpu does not support the native resolution of my new monitor, which is 3840x2160. Using a HDMI or DVI connection (I tried both, same results), the maximum supported refresh is 30Hz, so I'm stuck with that (don't have a displayport). The radeon module works fine, I'm having this issue just when I use amdgpu (which I'd like to, because performance is better).
Some info of my hardware:
cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
kernel version (I tried different ones and different linux distros, same results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Monitor: Samsung U28E590.
description:
If I boot the system using amdgpu and no video mode selection, the system boots but I don't get a screen during boot and in wayland. I can connect using ssh, so the system is running fine, just no display; If I force a full HD resolution with "video:" in the kernel line, I can see the boot process but the screen disappears when wayland starts (because the default resolution is 3840x2160@30Hz). Using a full HD monitor results in no issues, so it must be related to this very 4k resolution.
As I have already stated, radeon module works with the same software/hardware configuration.
thanks you so much for your time :-)
--
Davide Corrado
UNIX Team Leader
Via Abramo Lincoln, 25
20129 Milano
Tel +39 3474259950
[-- Attachment #1.2: Type: text/html, Size: 3873 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-04 14:01 ` Deucher, Alexander
0 siblings, 0 replies; 18+ messages in thread
From: Deucher, Alexander @ 2021-01-04 14:01 UTC (permalink / raw)
To: Davide Corrado
Cc: airlied, linux-kernel, dri-devel, amd-gfx, daniel, Koenig, Christian
[-- Attachment #1.1: Type: text/plain, Size: 2243 bytes --]
[AMD Official Use Only - Internal Distribution Only]
You might try enabling DC (the newer modesetting infrastructure). Append amdgpu.dc=1 to the kernel command line in grub.
Alex
________________________________
From: Davide Corrado <davide@davidecorrado.eu>
Sent: Saturday, January 2, 2021 1:50 PM
To: Deucher, Alexander <Alexander.Deucher@amd.com>
Cc: Koenig, Christian <Christian.Koenig@amd.com>; airlied@linux.ie <airlied@linux.ie>; daniel@ffwll.ch <daniel@ffwll.ch>; amd-gfx@lists.freedesktop.org <amd-gfx@lists.freedesktop.org>; dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Subject: amdgpu does not support 3840x2160@30Hz on kaveri apu
hello, I'd like to report this issue that I am having since I updated my display (samsung U28E590). The amdgpu does not support the native resolution of my new monitor, which is 3840x2160. Using a HDMI or DVI connection (I tried both, same results), the maximum supported refresh is 30Hz, so I'm stuck with that (don't have a displayport). The radeon module works fine, I'm having this issue just when I use amdgpu (which I'd like to, because performance is better).
Some info of my hardware:
cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
kernel version (I tried different ones and different linux distros, same results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Monitor: Samsung U28E590.
description:
If I boot the system using amdgpu and no video mode selection, the system boots but I don't get a screen during boot and in wayland. I can connect using ssh, so the system is running fine, just no display; If I force a full HD resolution with "video:" in the kernel line, I can see the boot process but the screen disappears when wayland starts (because the default resolution is 3840x2160@30Hz). Using a full HD monitor results in no issues, so it must be related to this very 4k resolution.
As I have already stated, radeon module works with the same software/hardware configuration.
thanks you so much for your time :-)
--
Davide Corrado
UNIX Team Leader
Via Abramo Lincoln, 25
20129 Milano
Tel +39 3474259950
[-- Attachment #1.2: Type: text/html, Size: 3873 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
2021-01-04 14:01 ` Deucher, Alexander
@ 2021-01-04 15:01 ` Davide Corrado
-1 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-04 15:01 UTC (permalink / raw)
To: Deucher, Alexander
Cc: airlied, linux-kernel, dri-devel, amd-gfx, Koenig, Christian
[-- Attachment #1.1: Type: text/plain, Size: 2811 bytes --]
SOLVED
I opened a ticket here:
https://gitlab.freedesktop.org/drm/amd/-/issues/1425
and they suggested, at the end, the same hint (amdgpu.dc=1).
... which, I was sure, I already tried with no results. Maybe I just
misspelled it, and it didn't work.
It's working now, thank you so much for your help.
On Mon, Jan 4, 2021 at 3:01 PM Deucher, Alexander <Alexander.Deucher@amd.com>
wrote:
> [AMD Official Use Only - Internal Distribution Only]
>
> You might try enabling DC (the newer modesetting infrastructure). Append
> amdgpu.dc=1 to the kernel command line in grub.
>
> Alex
>
> ------------------------------
> *From:* Davide Corrado <davide@davidecorrado.eu>
> *Sent:* Saturday, January 2, 2021 1:50 PM
> *To:* Deucher, Alexander <Alexander.Deucher@amd.com>
> *Cc:* Koenig, Christian <Christian.Koenig@amd.com>; airlied@linux.ie <
> airlied@linux.ie>; daniel@ffwll.ch <daniel@ffwll.ch>;
> amd-gfx@lists.freedesktop.org <amd-gfx@lists.freedesktop.org>;
> dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>;
> linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> *Subject:* amdgpu does not support 3840x2160@30Hz on kaveri apu
>
> hello, I'd like to report this issue that I am having since I updated my
> display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
> connection (I tried both, same results), the maximum supported refresh is
> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
> works fine, I'm having this issue just when I use amdgpu (which I'd like
> to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros, same
> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
> x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the system
> boots but I don't get a screen during boot and in wayland. I can connect
> using ssh, so the system is running fine, just no display; If I force a
> full HD resolution with "video:" in the kernel line, I can see the boot
> process but the screen disappears when wayland starts (because the default
> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
> issues, so it must be related to this very 4k resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
>
--
Davide Corrado
UNIX Team Leader
Via Abramo Lincoln, 25
20129 Milano
Tel +39 3474259950
[-- Attachment #1.2: Type: text/html, Size: 5766 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: amdgpu does not support 3840x2160@30Hz on kaveri apu
@ 2021-01-04 15:01 ` Davide Corrado
0 siblings, 0 replies; 18+ messages in thread
From: Davide Corrado @ 2021-01-04 15:01 UTC (permalink / raw)
To: Deucher, Alexander
Cc: airlied, linux-kernel, dri-devel, amd-gfx, daniel, Koenig, Christian
[-- Attachment #1.1: Type: text/plain, Size: 2811 bytes --]
SOLVED
I opened a ticket here:
https://gitlab.freedesktop.org/drm/amd/-/issues/1425
and they suggested, at the end, the same hint (amdgpu.dc=1).
... which, I was sure, I already tried with no results. Maybe I just
misspelled it, and it didn't work.
It's working now, thank you so much for your help.
On Mon, Jan 4, 2021 at 3:01 PM Deucher, Alexander <Alexander.Deucher@amd.com>
wrote:
> [AMD Official Use Only - Internal Distribution Only]
>
> You might try enabling DC (the newer modesetting infrastructure). Append
> amdgpu.dc=1 to the kernel command line in grub.
>
> Alex
>
> ------------------------------
> *From:* Davide Corrado <davide@davidecorrado.eu>
> *Sent:* Saturday, January 2, 2021 1:50 PM
> *To:* Deucher, Alexander <Alexander.Deucher@amd.com>
> *Cc:* Koenig, Christian <Christian.Koenig@amd.com>; airlied@linux.ie <
> airlied@linux.ie>; daniel@ffwll.ch <daniel@ffwll.ch>;
> amd-gfx@lists.freedesktop.org <amd-gfx@lists.freedesktop.org>;
> dri-devel@lists.freedesktop.org <dri-devel@lists.freedesktop.org>;
> linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
> *Subject:* amdgpu does not support 3840x2160@30Hz on kaveri apu
>
> hello, I'd like to report this issue that I am having since I updated my
> display (samsung U28E590). The amdgpu does not support the native
> resolution of my new monitor, which is 3840x2160*.* Using a HDMI or DVI
> connection (I tried both, same results), the maximum supported refresh is
> 30Hz, so I'm stuck with that (don't have a displayport). The radeon module
> works fine, I'm having this issue just when I use amdgpu (which I'd like
> to, because performance is better).
>
> Some info of my hardware:
>
> cpu: AMD A10-7870K Radeon R7, 12 Compute Cores 4C+8G
> kernel version (I tried different ones and different linux distros, same
> results!): 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020
> x86_64 x86_64 x86_64 GNU/Linux
> Monitor: Samsung U28E590.
>
> description:
> If I boot the system using amdgpu and no video mode selection, the system
> boots but I don't get a screen during boot and in wayland. I can connect
> using ssh, so the system is running fine, just no display; If I force a
> full HD resolution with "video:" in the kernel line, I can see the boot
> process but the screen disappears when wayland starts (because the default
> resolution is 3840x2160@30Hz). Using a full HD monitor results in no
> issues, so it must be related to this very 4k resolution.
>
> As I have already stated, radeon module works with the same
> software/hardware configuration.
> thanks you so much for your time :-)
>
> --
> Davide Corrado
> UNIX Team Leader
>
> Via Abramo Lincoln, 25
> 20129 Milano
>
> Tel +39 3474259950
>
--
Davide Corrado
UNIX Team Leader
Via Abramo Lincoln, 25
20129 Milano
Tel +39 3474259950
[-- Attachment #1.2: Type: text/html, Size: 5766 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 18+ messages in thread