* Help!!! Error while booting yocto linux
@ 2013-05-24 14:38 Sayed Zahid
2013-05-24 15:19 ` Gary Thomas
2013-05-24 15:29 ` Daiane Angolini
0 siblings, 2 replies; 3+ messages in thread
From: Sayed Zahid @ 2013-05-24 14:38 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1225 bytes --]
Hi,
I am trying to compile and boot the yocto linux, compilation has completed
smoothly but when i try to boot the freescale board with the new uImage and
rootfs ext2 filesystem , iam getting the below error
init started: BusyBox v1.13.2 (2010-06-21 12:46:04 IST)
Bad inittab entry at line 5
can't open /dev/si: No such file or directory
can't open /dev/~~: No such file or directory
can't open /dev/l0: No such file or directory
can't open /dev/l1: No such file or directory
can't open /dev/l2: No such file or directory
can't open /dev/l3: No such file or directory
can't open /dev/l4: No such file or directory
can't open /dev/l5: No such file or directory
can't open /dev/l6: No such file or directory
can't open /dev/z6: No such file or directory
can't open /dev/S: No such file or directory
can't open /dev/1: No such file or directory
I got to know this may be because of inittab. inittab is pointing to
sbin/sysvinit . i think it is not pointing to proper link, i suppose it
should point to /bin/busybox I have already spend many days on this, trying
to figure out the problem.
Could you please help me understand and solve the problem
Looking back to hear from you
Regards,
Zahid
[-- Attachment #2: Type: text/html, Size: 1377 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Help!!! Error while booting yocto linux
2013-05-24 14:38 Help!!! Error while booting yocto linux Sayed Zahid
@ 2013-05-24 15:19 ` Gary Thomas
2013-05-24 15:29 ` Daiane Angolini
1 sibling, 0 replies; 3+ messages in thread
From: Gary Thomas @ 2013-05-24 15:19 UTC (permalink / raw)
To: meta-freescale
On 2013-05-24 08:38, Sayed Zahid wrote:
> Hi,
> I am trying to compile and boot the yocto linux, compilation has completed smoothly but when i try to boot the freescale board with the new uImage and rootfs ext2 filesystem , iam
> getting the below error
>
>
>
> init started: BusyBox v1.13.2 (2010-06-21 12:46:04 IST)
> Bad inittab entry at line 5
> can't open /dev/si: No such file or directory
> can't open /dev/~~: No such file or directory
> can't open /dev/l0: No such file or directory
> can't open /dev/l1: No such file or directory
> can't open /dev/l2: No such file or directory
> can't open /dev/l3: No such file or directory
> can't open /dev/l4: No such file or directory
> can't open /dev/l5: No such file or directory
> can't open /dev/l6: No such file or directory
> can't open /dev/z6: No such file or directory
> can't open /dev/S: No such file or directory
> can't open /dev/1: No such file or directory
>
> I got to know this may be because of inittab. inittab is pointing to sbin/sysvinit . i think it is not pointing to proper link, i suppose it should point to /bin/busybox I have
> already spend many days on this, trying to figure out the problem.
> Could you please help me understand and solve the problem
> Looking back to hear from you
> Regards,
> Zahid
What's your target platform?
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Help!!! Error while booting yocto linux
2013-05-24 14:38 Help!!! Error while booting yocto linux Sayed Zahid
2013-05-24 15:19 ` Gary Thomas
@ 2013-05-24 15:29 ` Daiane Angolini
1 sibling, 0 replies; 3+ messages in thread
From: Daiane Angolini @ 2013-05-24 15:29 UTC (permalink / raw)
To: Sayed Zahid; +Cc: meta-freescale
On 05/24/2013 11:38 AM, Sayed Zahid wrote:
> Hi,
> I am trying to compile and boot the yocto linux, compilation has
> completed smoothly but when i try to boot the freescale board with the
> new uImage and rootfs ext2 filesystem , iam getting the below error
Did you tried the .sdcard image instead?
If you are only updating uImage and rootfs/ext2, I suppose you have a
u-boot unchanged on your sdcard.
Which u-boot version are you using?
Could you, please, share your bootargs?
Do you know your kernel version? Share here the uImage file name we can
figure it out.
>
>
>
> init started: BusyBox v1.13.2 (2010-06-21 12:46:04 IST)
> Bad inittab entry at line 5
> can't open /dev/si: No such file or directory
> can't open /dev/~~: No such file or directory
> can't open /dev/l0: No such file or directory
> can't open /dev/l1: No such file or directory
> can't open /dev/l2: No such file or directory
> can't open /dev/l3: No such file or directory
> can't open /dev/l4: No such file or directory
> can't open /dev/l5: No such file or directory
> can't open /dev/l6: No such file or directory
> can't open /dev/z6: No such file or directory
> can't open /dev/S: No such file or directory
> can't open /dev/1: No such file or directory
>
> I got to know this may be because of inittab. inittab is pointing to
> sbin/sysvinit . i think it is not pointing to proper link, i suppose it
> should point to /bin/busybox I have already spend many days on this,
> trying to figure out the problem.
> Could you please help me understand and solve the problem
Sure, let's try to figure out your scenario ;)
> Looking back to hear from you
> Regards,
> Zahid
--
Daiane
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-05-24 15:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-24 14:38 Help!!! Error while booting yocto linux Sayed Zahid
2013-05-24 15:19 ` Gary Thomas
2013-05-24 15:29 ` Daiane Angolini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.