* Recurring error with SATA driver.
@ 2012-01-03 19:33 D. Stussy
2012-01-05 2:10 ` Gwendal Grignou
2012-01-11 1:05 ` Gwendal Grignou
0 siblings, 2 replies; 3+ messages in thread
From: D. Stussy @ 2012-01-03 19:33 UTC (permalink / raw)
To: jgarzik; +Cc: linux-ide
ata1: illegal qc_active transition (3fffffff->fffffffe)
I'm getting this about once every 3 days. When this happens, the affected
partition is remounted read-only (per my file system error options).
I am not certain if this is telling me I have a hardware error,
incompatibility, or if there's a design problem with the driver.
Seen with kernels: 3.0.14, 3.1.4, 3.1.5, and 3.1.6
Motherboard: Supermicro H8SCM-F
Disk Drives: Seagate 1.8TB drives
Kernel log messages:
pci 0000:00:11.0: set SATA to AHCI mode
libata version 3.00 loaded.
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ata1: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa500 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa580 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa600 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa680 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST32000644NS, SN11, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ATA-8: ST32000644NS, SN11, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: ATAPI: Optiarc DVD RW AD-7700S, 1.03, max UDMA/100
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
scsi 1:0:0:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/100
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7700S 1.03 PQ: 0 ANSI: 5
Kernel options:
CONFIG_SCSI_SAS_ATA=y
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_PATA_AMD=y
CONFIG_ATA_GENERIC=y
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Recurring error with SATA driver.
2012-01-03 19:33 Recurring error with SATA driver D. Stussy
@ 2012-01-05 2:10 ` Gwendal Grignou
2012-01-11 1:05 ` Gwendal Grignou
1 sibling, 0 replies; 3+ messages in thread
From: Gwendal Grignou @ 2012-01-05 2:10 UTC (permalink / raw)
To: D. Stussy; +Cc: jgarzik, linux-ide
Can you give more details?
- output of
lspci -vv -s 0000:00:11.0
- output of
hdparm -I /dev/sda
- 40 lines below and above the error line you reported 'ata1: illegal
qc_active transition (3fffffff->fffffffe)' from /var/log/messages
Gwendal.
On Tue, Jan 3, 2012 at 11:33 AM, D. Stussy
<replies+newsgroups@kd6lvw.ampr.org> wrote:
>
> ata1: illegal qc_active transition (3fffffff->fffffffe)
>
> I'm getting this about once every 3 days. When this happens, the affected partition is remounted read-only (per my file system error options).
>
> I am not certain if this is telling me I have a hardware error, incompatibility, or if there's a design problem with the driver.
>
> Seen with kernels: 3.0.14, 3.1.4, 3.1.5, and 3.1.6
>
> Motherboard: Supermicro H8SCM-F
> Disk Drives: Seagate 1.8TB drives
>
> Kernel log messages:
> pci 0000:00:11.0: set SATA to AHCI mode
> libata version 3.00 loaded.
> ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ata1: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa500 irq 22
> ata2: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa580 irq 22
> ata3: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa600 irq 22
> ata4: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa680 irq 22
> ata3: SATA link down (SStatus 0 SControl 300)
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-8: ST32000644NS, SN11, max UDMA/133
> ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata2.00: ATA-8: ST32000644NS, SN11, max UDMA/133
> ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata4.00: ATAPI: Optiarc DVD RW AD-7700S, 1.03, max UDMA/100
> ata1.00: configured for UDMA/133
> ata2.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
> scsi 1:0:0:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
> sd 1:0:0:0: [sdb] Write Protect is off
> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata4.00: configured for UDMA/100
> sda: sda1
> sd 0:0:0:0: [sda] Attached SCSI disk
> sdb: sdb1
> sd 1:0:0:0: [sdb] Attached SCSI disk
> scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7700S 1.03 PQ: 0 ANSI: 5
>
> Kernel options:
> CONFIG_SCSI_SAS_ATA=y
> CONFIG_ATA=y
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> CONFIG_SATA_AHCI=y
> CONFIG_ATA_SFF=y
> CONFIG_ATA_BMDMA=y
> CONFIG_PATA_AMD=y
> CONFIG_ATA_GENERIC=y
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Recurring error with SATA driver.
2012-01-03 19:33 Recurring error with SATA driver D. Stussy
2012-01-05 2:10 ` Gwendal Grignou
@ 2012-01-11 1:05 ` Gwendal Grignou
1 sibling, 0 replies; 3+ messages in thread
From: Gwendal Grignou @ 2012-01-11 1:05 UTC (permalink / raw)
To: IDE/ATA development list
D. Stussy,
Can you give more details?
- output of
lspci -vv -s 0000:00:11.0
- output of
hdparm -I /dev/sda
- 40 lines below and above the error line you reported 'ata1: illegal
qc_active transition (3fffffff->fffffffe)' from /var/log/messages
Gwendal.
On Tue, Jan 3, 2012 at 11:33 AM, D. Stussy
<replies+newsgroups@kd6lvw.ampr.org> wrote:
> ata1: illegal qc_active transition (3fffffff->fffffffe)
>
> I'm getting this about once every 3 days. When this happens, the affected
> partition is remounted read-only (per my file system error options).
>
> I am not certain if this is telling me I have a hardware error,
> incompatibility, or if there's a design problem with the driver.
>
> Seen with kernels: 3.0.14, 3.1.4, 3.1.5, and 3.1.6
>
> Motherboard: Supermicro H8SCM-F
> Disk Drives: Seagate 1.8TB drives
>
> Kernel log messages:
> pci 0000:00:11.0: set SATA to AHCI mode
> libata version 3.00 loaded.
> ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ata1: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa500 irq 22
> ata2: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa580 irq 22
> ata3: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa600 irq 22
> ata4: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa680 irq 22
> ata3: SATA link down (SStatus 0 SControl 300)
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-8: ST32000644NS, SN11, max UDMA/133
> ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata2.00: ATA-8: ST32000644NS, SN11, max UDMA/133
> ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata4.00: ATAPI: Optiarc DVD RW AD-7700S, 1.03, max UDMA/100
> ata1.00: configured for UDMA/133
> ata2.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
> scsi 1:0:0:0: Direct-Access ATA ST32000644NS SN11 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
> sd 1:0:0:0: [sdb] Write Protect is off
> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> ata4.00: configured for UDMA/100
> sda: sda1
> sd 0:0:0:0: [sda] Attached SCSI disk
> sdb: sdb1
> sd 1:0:0:0: [sdb] Attached SCSI disk
> scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7700S 1.03 PQ: 0 ANSI: 5
>
> Kernel options:
> CONFIG_SCSI_SAS_ATA=y
> CONFIG_ATA=y
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> CONFIG_SATA_AHCI=y
> CONFIG_ATA_SFF=y
> CONFIG_ATA_BMDMA=y
> CONFIG_PATA_AMD=y
> CONFIG_ATA_GENERIC=y
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-01-11 1:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-03 19:33 Recurring error with SATA driver D. Stussy
2012-01-05 2:10 ` Gwendal Grignou
2012-01-11 1:05 ` Gwendal Grignou
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.