* Icecc configuration on mpich ? @ 2017-07-28 5:56 Riko Ho 2017-07-28 6:13 ` Josef Holzmayr 0 siblings, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-07-28 5:56 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 245 bytes --] Dear Yocto Team Member, I read about, https://lists.yoctoproject.org/pipermail/yocto/2012-August/008757.html, How can I port it to MPICH ? Thanks -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 744 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 5:56 Icecc configuration on mpich ? Riko Ho @ 2017-07-28 6:13 ` Josef Holzmayr 2017-07-28 6:17 ` Riko Ho 0 siblings, 1 reply; 27+ messages in thread From: Josef Holzmayr @ 2017-07-28 6:13 UTC (permalink / raw) To: Riko Ho, yocto On 28.07.2017 07:56, Riko Ho wrote: > How can I port it to MPICH ? Easy, just do a complete rewrite of the compiler infrastructure :-) Or did you actually mean "how can I install" instead of "how can I port"? In that case, the answer is "Not at all." Seriously, icecc/distcc have absolutely nothing to do with mpich(or any other comparable mpi/hpc framework). You are mixing up an awful lot of buzzwords, what is running where and doing what. If you want to speed up bitbake by using multiple boxes, icecc is your choice. Follow its own installation procedures for getting started. mpich seems to be a framwork/infrastructure for hpc applications, which is something completely different. And generally, all this shbang is not worth the effort. Are you really running multiple hours of builds per day? Would shaving off a couple of percent from the compilation provide any gain? Mind, its only the compilation that can be distributed. Not the whole rest that actually makes up the magic of a bitbake build. -- Josef Holzmayr Software Developer Embedded Systems Tel: +49 8444 9204-48 Fax: +49 8444 9204-50 R-S-I Elektrotechnik GmbH & Co. KG Woelkestrasse 11 D-85301 Schweitenkirchen www.rsi-elektrotechnik.de ——————————————— Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg Ust-IdNr: DE 128592548 _____________________________________________________________ Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg USt-IdNr.: DE 128592548 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 6:13 ` Josef Holzmayr @ 2017-07-28 6:17 ` Riko Ho 2017-07-28 6:22 ` Josef Holzmayr 0 siblings, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-07-28 6:17 UTC (permalink / raw) To: Josef Holzmayr, yocto [-- Attachment #1: Type: text/plain, Size: 1513 bytes --] Dear Yocto Team Member, Yes, I'm confuse about those, And reading about Icecc now. Icecc is the right way for distributing compilation for my bitbake, correct me ? I read about : 26.50. icecc.bbclass on Yocto manual, but I'm not sure on how to use it yet ? Thanks On 28/07/17 14:13, Josef Holzmayr wrote: > On 28.07.2017 07:56, Riko Ho wrote: >> How can I port it to MPICH ? > > Easy, just do a complete rewrite of the compiler infrastructure :-) > > Or did you actually mean "how can I install" instead of "how can I > port"? In that case, the answer is "Not at all." > > Seriously, icecc/distcc have absolutely nothing to do with mpich(or > any other comparable mpi/hpc framework). You are mixing up an awful > lot of buzzwords, what is running where and doing what. > > If you want to speed up bitbake by using multiple boxes, icecc is your > choice. Follow its own installation procedures for getting started. > > mpich seems to be a framwork/infrastructure for hpc applications, > which is something completely different. > > And generally, all this shbang is not worth the effort. Are you really > running multiple hours of builds per day? Would shaving off a couple > of percent from the compilation provide any gain? Mind, its only the > compilation that can be distributed. Not the whole rest that actually > makes up the magic of a bitbake build. > > -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 2425 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 6:17 ` Riko Ho @ 2017-07-28 6:22 ` Josef Holzmayr 2017-07-28 6:27 ` Riko Ho 2017-07-28 6:30 ` Riko Ho 0 siblings, 2 replies; 27+ messages in thread From: Josef Holzmayr @ 2017-07-28 6:22 UTC (permalink / raw) To: Riko Ho, yocto On 28.07.2017 08:17, Riko Ho wrote: > icecc.bbclass on Yocto manual, but I'm not sure on how to use it yet ? to me, the description in https://stackoverflow.com/questions/14472175/distributed-compile-with-bitbake looks pretty good - for the bitbake side of things. Setting up icecc, again, is distribution specific (according to themselves, see https://github.com/icecc/icecream/blob/master/README.md#installation). -- Josef Holzmayr Software Developer Embedded Systems Tel: +49 8444 9204-48 Fax: +49 8444 9204-50 R-S-I Elektrotechnik GmbH & Co. KG Woelkestrasse 11 D-85301 Schweitenkirchen www.rsi-elektrotechnik.de ——————————————— Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg Ust-IdNr: DE 128592548 _____________________________________________________________ Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg USt-IdNr.: DE 128592548 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 6:22 ` Josef Holzmayr @ 2017-07-28 6:27 ` Riko Ho 2017-07-28 6:30 ` Riko Ho 1 sibling, 0 replies; 27+ messages in thread From: Riko Ho @ 2017-07-28 6:27 UTC (permalink / raw) To: Josef Holzmayr, yocto [-- Attachment #1: Type: text/plain, Size: 694 bytes --] Probably this one will help the way ? http://manpages.ubuntu.com/manpages/xenial/man7/icecream.7.html On 28/07/17 14:22, Josef Holzmayr wrote: > On 28.07.2017 08:17, Riko Ho wrote: >> icecc.bbclass on Yocto manual, but I'm not sure on how to use it yet ? > > to me, the description in > > https://stackoverflow.com/questions/14472175/distributed-compile-with-bitbake > > > looks pretty good - for the bitbake side of things. Setting up icecc, > again, is distribution specific (according to themselves, see > https://github.com/icecc/icecream/blob/master/README.md#installation). -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 1753 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 6:22 ` Josef Holzmayr 2017-07-28 6:27 ` Riko Ho @ 2017-07-28 6:30 ` Riko Ho 2017-07-28 6:36 ` Josef Holzmayr 1 sibling, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-07-28 6:30 UTC (permalink / raw) To: Josef Holzmayr, yocto [-- Attachment #1: Type: text/plain, Size: 2148 bytes --] I've installed on my system, but have no idea on how to use it yet ? Usage: icecc [compiler] [compile options] -o OBJECT -c SOURCE icecc --build-native [compilertype] [file...] icecc --help Options: --help explain usage and exit --version show version and exit --build-native create icecc environment Environment Variables: ICECC if set to "no", just exec the real compiler ICECC_VERSION use a specific icecc environment, see icecc-create-env ICECC_DEBUG [info | warnings | debug] sets verboseness of icecream client. ICECC_LOGFILE if set, additional debug information is logged to the specified file ICECC_REPEAT_RATE the number of jobs out of 1000 that should be compiled on multiple hosts to ensure that they're producing the same output. The default is 0. ICECC_PREFERRED_HOST overrides scheduler decisions if set. ICECC_CC set C compiler name (default gcc). ICECC_CXX set C++ compiler name (default g++). ICECC_CLANG_REMOTE_CPP set to 1 or 0 to override remote precompiling with clang (requires clang -frewrite-includes option). ICECC_IGNORE_UNVERIFIED if set, hosts where environment cannot be verified are not used. ICECC_EXTRAFILES additi On 28/07/17 14:22, Josef Holzmayr wrote: > On 28.07.2017 08:17, Riko Ho wrote: >> icecc.bbclass on Yocto manual, but I'm not sure on how to use it yet ? > > to me, the description in > > https://stackoverflow.com/questions/14472175/distributed-compile-with-bitbake > > > looks pretty good - for the bitbake side of things. Setting up icecc, > again, is distribution specific (according to themselves, see > https://github.com/icecc/icecream/blob/master/README.md#installation). -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 3716 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 6:30 ` Riko Ho @ 2017-07-28 6:36 ` Josef Holzmayr 2017-07-28 6:42 ` Riko Ho ` (3 more replies) 0 siblings, 4 replies; 27+ messages in thread From: Josef Holzmayr @ 2017-07-28 6:36 UTC (permalink / raw) To: Riko Ho, yocto On 28.07.2017 08:30, Riko Ho wrote: > but have no idea on how to use it yet ? This usually is helped by reading the manual. Or the links that I already provided. As a last hint for now, let me rephrase and simplify the short description from icecc itself: icecc is a daemon that can accept compile jobs over the network. That should tell you that you probably don't use it directly, right? -- Josef Holzmayr Software Developer Embedded Systems Tel: +49 8444 9204-48 Fax: +49 8444 9204-50 R-S-I Elektrotechnik GmbH & Co. KG Woelkestrasse 11 D-85301 Schweitenkirchen www.rsi-elektrotechnik.de ——————————————— Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg Ust-IdNr: DE 128592548 _____________________________________________________________ Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg USt-IdNr.: DE 128592548 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 6:36 ` Josef Holzmayr @ 2017-07-28 6:42 ` Riko Ho 2017-07-28 8:02 ` Riko Ho ` (2 subsequent siblings) 3 siblings, 0 replies; 27+ messages in thread From: Riko Ho @ 2017-07-28 6:42 UTC (permalink / raw) To: Josef Holzmayr, yocto [-- Attachment #1: Type: text/plain, Size: 617 bytes --] Ok, thanks for the hints, I'll make some experiments On 28/07/17 14:36, Josef Holzmayr wrote: > On 28.07.2017 08:30, Riko Ho wrote: >> but have no idea on how to use it yet ? > > This usually is helped by reading the manual. Or the links that I > already provided. > > As a last hint for now, let me rephrase and simplify the short > description from icecc itself: > > icecc is a daemon that can accept compile jobs over the network. > > That should tell you that you probably don't use it directly, right? -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 1349 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Icecc configuration on mpich ? 2017-07-28 6:36 ` Josef Holzmayr 2017-07-28 6:42 ` Riko Ho @ 2017-07-28 8:02 ` Riko Ho 2017-07-31 2:12 ` Icecc configuration on ubuntu ? Riko Ho 2017-07-31 2:33 ` DEBUG: automake-native: class native found in blacklist, disable icecc ? Riko Ho 3 siblings, 0 replies; 27+ messages in thread From: Riko Ho @ 2017-07-28 8:02 UTC (permalink / raw) To: Josef Holzmayr, yocto [-- Attachment #1: Type: text/plain, Size: 829 bytes --] Dear Yocto Team Member, I've followed : https://lists.yoctoproject.org/pipermail/yocto/2012-August/008757.html and trying to do bitbake but got : DEBUG: automake-native: class native found in blacklist, disable icecc any work around it ? thanks On 28/07/17 14:36, Josef Holzmayr wrote: > On 28.07.2017 08:30, Riko Ho wrote: >> but have no idea on how to use it yet ? > > This usually is helped by reading the manual. Or the links that I > already provided. > > As a last hint for now, let me rephrase and simplify the short > description from icecc itself: > > icecc is a daemon that can accept compile jobs over the network. > > That should tell you that you probably don't use it directly, right? -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 1757 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Icecc configuration on ubuntu ? 2017-07-28 6:36 ` Josef Holzmayr 2017-07-28 6:42 ` Riko Ho 2017-07-28 8:02 ` Riko Ho @ 2017-07-31 2:12 ` Riko Ho 2017-07-31 2:33 ` DEBUG: automake-native: class native found in blacklist, disable icecc ? Riko Ho 3 siblings, 0 replies; 27+ messages in thread From: Riko Ho @ 2017-07-31 2:12 UTC (permalink / raw) To: Josef Holzmayr, yocto [-- Attachment #1: Type: text/plain, Size: 559 bytes --] Dear Yocto Team Member, I've been reading : https://www.openembedded.org/wiki/Using_IceCC on this part : ........... use icecc service provided by your distribution (e.g. in ubuntu set ICECC_SCHEDULER_HOST in /etc/icecc/icecc.conf and enable START_ICECC in /etc/default/icecc) ....... What should I fill with this configuration ? === # ICECC_SCHEDULER_HOST="" ICECC_SCHEDULER_HOST="" === Is it my Host Ip Address or my hostname ? Thank you, ** * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 1119 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-28 6:36 ` Josef Holzmayr ` (2 preceding siblings ...) 2017-07-31 2:12 ` Icecc configuration on ubuntu ? Riko Ho @ 2017-07-31 2:33 ` Riko Ho 2017-07-31 13:12 ` Burton, Ross 3 siblings, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-07-31 2:33 UTC (permalink / raw) To: Josef Holzmayr, yocto [-- Attachment #1: Type: text/plain, Size: 2248 bytes --] Dear Yocto Team Member, I tried #:~/poky/build$ bitbake core-image-minimal Is my auto make disabled with icecc ? How to make it enable ? thanks. Here's the messages: ================== NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log file is located at /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.7351) ERROR: Logfile of failure stored in: /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.7351 Log data follows: | DEBUG: automake-native: class native found in blacklist, disable icecc | DEBUG: automake-native: class native found in blacklist, disable icecc | DEBUG: automake-native: class native found in blacklist, disable icecc | DEBUG: Executing shell function do_compile | NOTE: make -j 10 | ERROR: oe_runmake failed | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man --output=doc/automake-1.15.1 automake-1.15 | help2man: can't get `--help' info from automake-1.15 | Try `--no-discard-stderr' if option outputs to stderr | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed | make: *** [doc/automake-1.15.1] Error 255 | ERROR: Function failed: do_compile (log file is located at /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.7351) ERROR: Task (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 230 tasks of which 194 didn't need to be rerun and 1 failed. Summary: 1 task failed: virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile Summary: There were 4 WARNING messages shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code. -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 3044 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 2:33 ` DEBUG: automake-native: class native found in blacklist, disable icecc ? Riko Ho @ 2017-07-31 13:12 ` Burton, Ross 2017-07-31 13:14 ` Riko Ho 0 siblings, 1 reply; 27+ messages in thread From: Burton, Ross @ 2017-07-31 13:12 UTC (permalink / raw) To: Riko Ho; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 579 bytes --] On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: > Is my auto make disabled with icecc ? > > How to make it enable ? thanks. > That's just a debug message. > | help2man: can't get `--help' info from automake-1.15 > | Try `--no-discard-stderr' if option outputs to stderr > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed That's the error your hitting. I think you need to update to the latest commit for the branch you're on, there was a problem with modern perl in help2man. What release/branch are you using? Ross [-- Attachment #2: Type: text/html, Size: 1046 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 13:12 ` Burton, Ross @ 2017-07-31 13:14 ` Riko Ho 2017-07-31 13:15 ` Burton, Ross 0 siblings, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-07-31 13:14 UTC (permalink / raw) To: Burton, Ross; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 713 bytes --] How can I see my branch? On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: > >> Is my auto make disabled with icecc ? >> >> How to make it enable ? thanks. >> > > That's just a debug message. > > > | help2man: can't get `--help' info from automake-1.15 > > | Try `--no-discard-stderr' if option outputs to stderr > > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > > > That's the error your hitting. > > I think you need to update to the latest commit for the branch you're on, > there was a problem with modern perl in help2man. What release/branch are > you using? > > Ross > [-- Attachment #2: Type: text/html, Size: 1389 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 13:14 ` Riko Ho @ 2017-07-31 13:15 ` Burton, Ross 2017-07-31 13:17 ` Riko Ho 0 siblings, 1 reply; 27+ messages in thread From: Burton, Ross @ 2017-07-31 13:15 UTC (permalink / raw) To: Riko Ho; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 846 bytes --] How did you get poky? Ross On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: > How can I see my branch? > On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > >> On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >> >>> Is my auto make disabled with icecc ? >>> >>> How to make it enable ? thanks. >>> >> >> That's just a debug message. >> >> > | help2man: can't get `--help' info from automake-1.15 >> > | Try `--no-discard-stderr' if option outputs to stderr >> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >> >> >> That's the error your hitting. >> >> I think you need to update to the latest commit for the branch you're on, >> there was a problem with modern perl in help2man. What release/branch are >> you using? >> >> Ross >> > [-- Attachment #2: Type: text/html, Size: 1872 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 13:15 ` Burton, Ross @ 2017-07-31 13:17 ` Riko Ho 2017-07-31 13:20 ` Riko Ho 2017-07-31 13:26 ` Burton, Ross 0 siblings, 2 replies; 27+ messages in thread From: Riko Ho @ 2017-07-31 13:17 UTC (permalink / raw) To: Burton, Ross; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 973 bytes --] Git clone ... On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > How did you get poky? > > Ross > > On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: > >> How can I see my branch? >> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >> >>> On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >>> >>>> Is my auto make disabled with icecc ? >>>> >>>> How to make it enable ? thanks. >>>> >>> >>> That's just a debug message. >>> >>> > | help2man: can't get `--help' info from automake-1.15 >>> > | Try `--no-discard-stderr' if option outputs to stderr >>> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >>> >>> >>> That's the error your hitting. >>> >>> I think you need to update to the latest commit for the branch you're >>> on, there was a problem with modern perl in help2man. What release/branch >>> are you using? >>> >>> Ross >>> >> > [-- Attachment #2: Type: text/html, Size: 2248 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 13:17 ` Riko Ho @ 2017-07-31 13:20 ` Riko Ho 2017-07-31 13:26 ` Burton, Ross 1 sibling, 0 replies; 27+ messages in thread From: Riko Ho @ 2017-07-31 13:20 UTC (permalink / raw) To: Burton, Ross; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 1178 bytes --] I forgot which one? How can I update?thx https://www.yoctoproject.org/downloads/yocto-project On Jul 31, 2017 9:17 PM, "Riko Ho" <antonius.riko@gmail.com> wrote: > Git clone ... > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > >> How did you get poky? >> >> Ross >> >> On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: >> >>> How can I see my branch? >>> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >>> >>>> On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >>>> >>>>> Is my auto make disabled with icecc ? >>>>> >>>>> How to make it enable ? thanks. >>>>> >>>> >>>> That's just a debug message. >>>> >>>> > | help2man: can't get `--help' info from automake-1.15 >>>> > | Try `--no-discard-stderr' if option outputs to stderr >>>> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >>>> >>>> >>>> That's the error your hitting. >>>> >>>> I think you need to update to the latest commit for the branch you're >>>> on, there was a problem with modern perl in help2man. What release/branch >>>> are you using? >>>> >>>> Ross >>>> >>> >> [-- Attachment #2: Type: text/html, Size: 2791 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 13:17 ` Riko Ho 2017-07-31 13:20 ` Riko Ho @ 2017-07-31 13:26 ` Burton, Ross 2017-08-01 3:13 ` Riko Ho 2017-08-02 6:18 ` Riko Ho 1 sibling, 2 replies; 27+ messages in thread From: Burton, Ross @ 2017-07-31 13:26 UTC (permalink / raw) To: Riko Ho; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 1152 bytes --] Then the branch you checked out. git branch will tell you. Ross On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: > Git clone ... > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > >> How did you get poky? >> >> Ross >> >> On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: >> >>> How can I see my branch? >>> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >>> >>>> On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >>>> >>>>> Is my auto make disabled with icecc ? >>>>> >>>>> How to make it enable ? thanks. >>>>> >>>> >>>> That's just a debug message. >>>> >>>> > | help2man: can't get `--help' info from automake-1.15 >>>> > | Try `--no-discard-stderr' if option outputs to stderr >>>> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >>>> >>>> >>>> That's the error your hitting. >>>> >>>> I think you need to update to the latest commit for the branch you're >>>> on, there was a problem with modern perl in help2man. What release/branch >>>> are you using? >>>> >>>> Ross >>>> >>> >> [-- Attachment #2: Type: text/html, Size: 2812 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 13:26 ` Burton, Ross @ 2017-08-01 3:13 ` Riko Ho 2017-08-02 6:18 ` Riko Ho 1 sibling, 0 replies; 27+ messages in thread From: Riko Ho @ 2017-08-01 3:13 UTC (permalink / raw) To: Burton, Ross; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 1913 bytes --] Dear Yocto Team Members, Here's what I got : ================= #:~/poky$ git branch master * pyro How can I fix that problem with modern perl in help2man ? Thanks On 31/07/17 21:26, Burton, Ross wrote: > Then the branch you checked out. git branch will tell you. > > Ross > > On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > Git clone ... > > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com > <mailto:ross.burton@intel.com>> wrote: > > How did you get poky? > > Ross > > On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > How can I see my branch? > > On Jul 31, 2017 9:12 PM, "Burton, Ross" > <ross.burton@intel.com <mailto:ross.burton@intel.com>> wrote: > > On 31 July 2017 at 03:33, Riko Ho > <antonius.riko@gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > Is my auto make disabled with icecc ? > > How to make it enable ? thanks. > > > That's just a debug message. > > > | help2man: can't get `--help' info from automake-1.15 > > | Try `--no-discard-stderr' if option outputs to stderr > > | Makefile:3687: recipe for target > 'doc/automake-1.15.1' failed > > > That's the error your hitting. > > I think you need to update to the latest commit for > the branch you're on, there was a problem with modern > perl in help2man. What release/branch are you using? > > Ross > > > -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 7377 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-07-31 13:26 ` Burton, Ross 2017-08-01 3:13 ` Riko Ho @ 2017-08-02 6:18 ` Riko Ho 2017-08-02 6:31 ` Khem Raj 1 sibling, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-08-02 6:18 UTC (permalink / raw) To: Burton, Ross; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 4342 bytes --] Dear Yocto Team Member, That's the branch : ====== *meta-poky ** **meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f"* openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" meta-openembedded meta-oe meta-xfce meta-gnome meta-python meta-multimedia meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" meta-browser = "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" Initialising tasks: 100% |################################################################################################################################| Time: 0:00:08 NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log file is located at /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) ERROR: Logfile of failure stored in: /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291 Log data follows: | DEBUG: Executing shell function do_compile | NOTE: Using icecc | NOTE: make -j 10 | ERROR: oe_runmake failed | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man --output=doc/automake-1.15.1 automake-1.15 | help2man: can't get `--help' info from automake-1.15 | Try `--no-discard-stderr' if option outputs to stderr | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed | make: *** [doc/automake-1.15.1] Error 255 | ERROR: Function failed: do_compile (log file is located at /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) ERROR: Task (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be rerun and 1 failed. Summary: 1 task failed: virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile Summary: There were 4 WARNING messages shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code. bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ How can I fix that automake error ? I tried to run bitbake core-image-minimal for it. Thanks, On 31/07/17 21:26, Burton, Ross wrote: > Then the branch you checked out. git branch will tell you. > > Ross > > On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > Git clone ... > > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com > <mailto:ross.burton@intel.com>> wrote: > > How did you get poky? > > Ross > > On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > How can I see my branch? > > On Jul 31, 2017 9:12 PM, "Burton, Ross" > <ross.burton@intel.com <mailto:ross.burton@intel.com>> wrote: > > On 31 July 2017 at 03:33, Riko Ho > <antonius.riko@gmail.com > <mailto:antonius.riko@gmail.com>> wrote: > > Is my auto make disabled with icecc ? > > How to make it enable ? thanks. > > > That's just a debug message. > > > | help2man: can't get `--help' info from automake-1.15 > > | Try `--no-discard-stderr' if option outputs to stderr > > | Makefile:3687: recipe for target > 'doc/automake-1.15.1' failed > > > That's the error your hitting. > > I think you need to update to the latest commit for > the branch you're on, there was a problem with modern > perl in help2man. What release/branch are you using? > > Ross > > > -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 10401 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 6:18 ` Riko Ho @ 2017-08-02 6:31 ` Khem Raj 2017-08-02 6:33 ` Riko Ho 0 siblings, 1 reply; 27+ messages in thread From: Khem Raj @ 2017-08-02 6:31 UTC (permalink / raw) To: Riko Ho; +Cc: yocto On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.riko@gmail.com> wrote: > Dear Yocto Team Member, > > That's the branch : > > ====== > > meta-poky > meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f" > openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" > meta-openembedded > meta-oe > meta-xfce > meta-gnome > meta-python > meta-multimedia > meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" > meta-browser = > "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" > meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" > > Initialising tasks: 100% > |################################################################################################################################| > Time: 0:00:08 > NOTE: Executing SetScene Tasks > NOTE: Executing RunQueue Tasks > ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed > ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log > file is located at > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) > ERROR: Logfile of failure stored in: > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291 > Log data follows: > | DEBUG: Executing shell function do_compile > | NOTE: Using icecc > | NOTE: make -j 10 > | ERROR: oe_runmake failed > | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { > PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH > && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man > --output=doc/automake-1.15.1 automake-1.15 > | help2man: can't get `--help' info from automake-1.15 What OS do you run on build machine ? if its archlinux then apply this patch to automake https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a otherwise if its centos7 then install yum install perl-Thread-Queue > | Try `--no-discard-stderr' if option outputs to stderr > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > | make: *** [doc/automake-1.15.1] Error 255 > | ERROR: Function failed: do_compile (log file is located at > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) > ERROR: Task > (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > > virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile > Summary: There were 4 WARNING messages shown. > Summary: There were 2 ERROR messages shown, returning a non-zero exit code. > bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ > > How can I fix that automake error ? > > I tried to run bitbake core-image-minimal for it. > Thanks, > > On 31/07/17 21:26, Burton, Ross wrote: > > Then the branch you checked out. git branch will tell you. > > Ross > > On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: >> >> Git clone ... >> >> On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >>> >>> How did you get poky? >>> >>> Ross >>> >>> On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: >>>> >>>> How can I see my branch? >>>> >>>> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >>>>> >>>>> On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >>>>>> >>>>>> Is my auto make disabled with icecc ? >>>>>> >>>>>> How to make it enable ? thanks. >>>>> >>>>> >>>>> That's just a debug message. >>>>> >>>>> > | help2man: can't get `--help' info from automake-1.15 >>>>> > | Try `--no-discard-stderr' if option outputs to stderr >>>>> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >>>>> >>>>> >>>>> That's the error your hitting. >>>>> >>>>> I think you need to update to the latest commit for the branch you're >>>>> on, there was a problem with modern perl in help2man. What release/branch >>>>> are you using? >>>>> >>>>> Ross >>> >>> > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > Kind regards, > Riko Ho > /*******/ > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 6:31 ` Khem Raj @ 2017-08-02 6:33 ` Riko Ho 2017-08-02 6:38 ` Khem Raj 0 siblings, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-08-02 6:33 UTC (permalink / raw) To: Khem Raj; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 4807 bytes --] Dear Yocto Team Member, I'm building with Ubuntu 16 On 02/08/17 14:31, Khem Raj wrote: > On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.riko@gmail.com> wrote: >> Dear Yocto Team Member, >> >> That's the branch : >> >> ====== >> >> meta-poky >> meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f" >> openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" >> meta-openembedded >> meta-oe >> meta-xfce >> meta-gnome >> meta-python >> meta-multimedia >> meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" >> meta-browser = >> "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" >> meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" >> >> Initialising tasks: 100% >> |################################################################################################################################| >> Time: 0:00:08 >> NOTE: Executing SetScene Tasks >> NOTE: Executing RunQueue Tasks >> ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed >> ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log >> file is located at >> /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) >> ERROR: Logfile of failure stored in: >> /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291 >> Log data follows: >> | DEBUG: Executing shell function do_compile >> | NOTE: Using icecc >> | NOTE: make -j 10 >> | ERROR: oe_runmake failed >> | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { >> PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH >> && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man >> --output=doc/automake-1.15.1 automake-1.15 >> | help2man: can't get `--help' info from automake-1.15 > What OS do you run on build machine ? > if its archlinux then apply this patch to automake > > https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a > > otherwise if its centos7 then install > > yum install perl-Thread-Queue > > > >> | Try `--no-discard-stderr' if option outputs to stderr >> | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >> | make: *** [doc/automake-1.15.1] Error 255 >> | ERROR: Function failed: do_compile (log file is located at >> /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) >> ERROR: Task >> (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile) >> failed with exit code '1' >> NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be >> rerun and 1 failed. >> >> Summary: 1 task failed: >> >> virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile >> Summary: There were 4 WARNING messages shown. >> Summary: There were 2 ERROR messages shown, returning a non-zero exit code. >> bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ >> >> How can I fix that automake error ? >> >> I tried to run bitbake core-image-minimal for it. >> Thanks, >> >> On 31/07/17 21:26, Burton, Ross wrote: >> >> Then the branch you checked out. git branch will tell you. >> >> Ross >> >> On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: >>> Git clone ... >>> >>> On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >>>> How did you get poky? >>>> >>>> Ross >>>> >>>> On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: >>>>> How can I see my branch? >>>>> >>>>> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >>>>>> On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >>>>>>> Is my auto make disabled with icecc ? >>>>>>> >>>>>>> How to make it enable ? thanks. >>>>>> >>>>>> That's just a debug message. >>>>>> >>>>>>> | help2man: can't get `--help' info from automake-1.15 >>>>>>> | Try `--no-discard-stderr' if option outputs to stderr >>>>>>> | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >>>>>> >>>>>> That's the error your hitting. >>>>>> >>>>>> I think you need to update to the latest commit for the branch you're >>>>>> on, there was a problem with modern perl in help2man. What release/branch >>>>>> are you using? >>>>>> >>>>>> Ross >>>> >> >> -- >> >> /*******/ >> Sent by Ubuntu LTS 16.04, >> Kind regards, >> Riko Ho >> /*******/ >> >> >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 6684 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 6:33 ` Riko Ho @ 2017-08-02 6:38 ` Khem Raj 2017-08-02 6:42 ` Riko Ho 0 siblings, 1 reply; 27+ messages in thread From: Khem Raj @ 2017-08-02 6:38 UTC (permalink / raw) To: Riko Ho; +Cc: yocto apply the solutions they may work for ubuntu On Tue, Aug 1, 2017 at 11:33 PM, Riko Ho <antonius.riko@gmail.com> wrote: > Dear Yocto Team Member, > > I'm building with Ubuntu 16 > > > On 02/08/17 14:31, Khem Raj wrote: > > On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.riko@gmail.com> wrote: > > Dear Yocto Team Member, > > That's the branch : > > ====== > > meta-poky > meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f" > openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" > meta-openembedded > meta-oe > meta-xfce > meta-gnome > meta-python > meta-multimedia > meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" > meta-browser = > "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" > meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" > > Initialising tasks: 100% > |################################################################################################################################| > Time: 0:00:08 > NOTE: Executing SetScene Tasks > NOTE: Executing RunQueue Tasks > ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed > ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log > file is located at > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) > ERROR: Logfile of failure stored in: > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291 > Log data follows: > | DEBUG: Executing shell function do_compile > | NOTE: Using icecc > | NOTE: make -j 10 > | ERROR: oe_runmake failed > | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { > PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH > && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man > --output=doc/automake-1.15.1 automake-1.15 > | help2man: can't get `--help' info from automake-1.15 > > What OS do you run on build machine ? > if its archlinux then apply this patch to automake > > https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a > > otherwise if its centos7 then install > > yum install perl-Thread-Queue > > > > | Try `--no-discard-stderr' if option outputs to stderr > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > | make: *** [doc/automake-1.15.1] Error 255 > | ERROR: Function failed: do_compile (log file is located at > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) > ERROR: Task > (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > > virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile > Summary: There were 4 WARNING messages shown. > Summary: There were 2 ERROR messages shown, returning a non-zero exit code. > bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ > > How can I fix that automake error ? > > I tried to run bitbake core-image-minimal for it. > Thanks, > > On 31/07/17 21:26, Burton, Ross wrote: > > Then the branch you checked out. git branch will tell you. > > Ross > > On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: > > Git clone ... > > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > > How did you get poky? > > Ross > > On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: > > How can I see my branch? > > On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > > On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: > > Is my auto make disabled with icecc ? > > How to make it enable ? thanks. > > That's just a debug message. > > | help2man: can't get `--help' info from automake-1.15 > | Try `--no-discard-stderr' if option outputs to stderr > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > > That's the error your hitting. > > I think you need to update to the latest commit for the branch you're > on, there was a problem with modern perl in help2man. What release/branch > are you using? > > Ross > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > Kind regards, > Riko Ho > /*******/ > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > Kind regards, > Riko Ho > /*******/ ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 6:38 ` Khem Raj @ 2017-08-02 6:42 ` Riko Ho 2017-08-02 13:52 ` Khem Raj 0 siblings, 1 reply; 27+ messages in thread From: Riko Ho @ 2017-08-02 6:42 UTC (permalink / raw) To: Khem Raj; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 5182 bytes --] Could it be this one ? https://www.devmanuals.net/install/ubuntu/ubuntu-12-04-lts-precise-pangolin/install-libthread-queue-perl.html Thanks On 02/08/17 14:38, Khem Raj wrote: > apply the solutions they may work for ubuntu > > On Tue, Aug 1, 2017 at 11:33 PM, Riko Ho <antonius.riko@gmail.com> wrote: >> Dear Yocto Team Member, >> >> I'm building with Ubuntu 16 >> >> >> On 02/08/17 14:31, Khem Raj wrote: >> >> On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.riko@gmail.com> wrote: >> >> Dear Yocto Team Member, >> >> That's the branch : >> >> ====== >> >> meta-poky >> meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f" >> openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" >> meta-openembedded >> meta-oe >> meta-xfce >> meta-gnome >> meta-python >> meta-multimedia >> meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" >> meta-browser = >> "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" >> meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" >> >> Initialising tasks: 100% >> |################################################################################################################################| >> Time: 0:00:08 >> NOTE: Executing SetScene Tasks >> NOTE: Executing RunQueue Tasks >> ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed >> ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log >> file is located at >> /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) >> ERROR: Logfile of failure stored in: >> /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291 >> Log data follows: >> | DEBUG: Executing shell function do_compile >> | NOTE: Using icecc >> | NOTE: make -j 10 >> | ERROR: oe_runmake failed >> | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { >> PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH >> && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man >> --output=doc/automake-1.15.1 automake-1.15 >> | help2man: can't get `--help' info from automake-1.15 >> >> What OS do you run on build machine ? >> if its archlinux then apply this patch to automake >> >> https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a >> >> otherwise if its centos7 then install >> >> yum install perl-Thread-Queue >> >> >> >> | Try `--no-discard-stderr' if option outputs to stderr >> | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >> | make: *** [doc/automake-1.15.1] Error 255 >> | ERROR: Function failed: do_compile (log file is located at >> /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) >> ERROR: Task >> (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile) >> failed with exit code '1' >> NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be >> rerun and 1 failed. >> >> Summary: 1 task failed: >> >> virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile >> Summary: There were 4 WARNING messages shown. >> Summary: There were 2 ERROR messages shown, returning a non-zero exit code. >> bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ >> >> How can I fix that automake error ? >> >> I tried to run bitbake core-image-minimal for it. >> Thanks, >> >> On 31/07/17 21:26, Burton, Ross wrote: >> >> Then the branch you checked out. git branch will tell you. >> >> Ross >> >> On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: >> >> Git clone ... >> >> On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >> >> How did you get poky? >> >> Ross >> >> On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: >> >> How can I see my branch? >> >> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >> >> On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >> >> Is my auto make disabled with icecc ? >> >> How to make it enable ? thanks. >> >> That's just a debug message. >> >> | help2man: can't get `--help' info from automake-1.15 >> | Try `--no-discard-stderr' if option outputs to stderr >> | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >> >> That's the error your hitting. >> >> I think you need to update to the latest commit for the branch you're >> on, there was a problem with modern perl in help2man. What release/branch >> are you using? >> >> Ross >> >> >> -- >> >> /*******/ >> Sent by Ubuntu LTS 16.04, >> Kind regards, >> Riko Ho >> /*******/ >> >> >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> >> >> -- >> >> /*******/ >> Sent by Ubuntu LTS 16.04, >> Kind regards, >> Riko Ho >> /*******/ -- * /*******/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /*******/ * [-- Attachment #2: Type: text/html, Size: 6458 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 6:42 ` Riko Ho @ 2017-08-02 13:52 ` Khem Raj 2017-08-02 15:01 ` Riko Ho 0 siblings, 1 reply; 27+ messages in thread From: Khem Raj @ 2017-08-02 13:52 UTC (permalink / raw) To: Riko Ho; +Cc: yocto On Tue, Aug 1, 2017 at 11:42 PM, Riko Ho <antonius.riko@gmail.com> wrote: > Could it be this one ? > > https://www.devmanuals.net/install/ubuntu/ubuntu-12-04-lts-precise-pangolin/install-libthread-queue-perl.html > yes > Thanks > > > On 02/08/17 14:38, Khem Raj wrote: > > apply the solutions they may work for ubuntu > > On Tue, Aug 1, 2017 at 11:33 PM, Riko Ho <antonius.riko@gmail.com> wrote: > > Dear Yocto Team Member, > > I'm building with Ubuntu 16 > > > On 02/08/17 14:31, Khem Raj wrote: > > On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.riko@gmail.com> wrote: > > Dear Yocto Team Member, > > That's the branch : > > ====== > > meta-poky > meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f" > openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" > meta-openembedded > meta-oe > meta-xfce > meta-gnome > meta-python > meta-multimedia > meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" > meta-browser = > "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" > meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" > > Initialising tasks: 100% > |################################################################################################################################| > Time: 0:00:08 > NOTE: Executing SetScene Tasks > NOTE: Executing RunQueue Tasks > ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed > ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log > file is located at > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) > ERROR: Logfile of failure stored in: > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291 > Log data follows: > | DEBUG: Executing shell function do_compile > | NOTE: Using icecc > | NOTE: make -j 10 > | ERROR: oe_runmake failed > | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { > PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH > && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man > --output=doc/automake-1.15.1 automake-1.15 > | help2man: can't get `--help' info from automake-1.15 > > What OS do you run on build machine ? > if its archlinux then apply this patch to automake > > https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a > > otherwise if its centos7 then install > > yum install perl-Thread-Queue > > > > | Try `--no-discard-stderr' if option outputs to stderr > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > | make: *** [doc/automake-1.15.1] Error 255 > | ERROR: Function failed: do_compile (log file is located at > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291) > ERROR: Task > (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile) > failed with exit code '1' > NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be > rerun and 1 failed. > > Summary: 1 task failed: > > virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile > Summary: There were 4 WARNING messages shown. > Summary: There were 2 ERROR messages shown, returning a non-zero exit code. > bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ > > How can I fix that automake error ? > > I tried to run bitbake core-image-minimal for it. > Thanks, > > On 31/07/17 21:26, Burton, Ross wrote: > > Then the branch you checked out. git branch will tell you. > > Ross > > On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: > > Git clone ... > > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > > How did you get poky? > > Ross > > On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: > > How can I see my branch? > > On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > > On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: > > Is my auto make disabled with icecc ? > > How to make it enable ? thanks. > > That's just a debug message. > > | help2man: can't get `--help' info from automake-1.15 > | Try `--no-discard-stderr' if option outputs to stderr > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > > That's the error your hitting. > > I think you need to update to the latest commit for the branch you're > on, there was a problem with modern perl in help2man. What release/branch > are you using? > > Ross > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > Kind regards, > Riko Ho > /*******/ > > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > Kind regards, > Riko Ho > /*******/ > > > -- > > /*******/ > Sent by Ubuntu LTS 16.04, > Kind regards, > Riko Ho > /*******/ ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 13:52 ` Khem Raj @ 2017-08-02 15:01 ` Riko Ho 2017-09-14 7:06 ` Yasushi SHOJI 2017-09-14 8:04 ` Yusuke Mitsuki 0 siblings, 2 replies; 27+ messages in thread From: Riko Ho @ 2017-08-02 15:01 UTC (permalink / raw) To: Khem Raj; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 5673 bytes --] Still got the same error after installing it? Any other clues? On Aug 2, 2017 9:53 PM, "Khem Raj" <raj.khem@gmail.com> wrote: > On Tue, Aug 1, 2017 at 11:42 PM, Riko Ho <antonius.riko@gmail.com> wrote: > > Could it be this one ? > > > > https://www.devmanuals.net/install/ubuntu/ubuntu-12-04- > lts-precise-pangolin/install-libthread-queue-perl.html > > > > yes > > > Thanks > > > > > > On 02/08/17 14:38, Khem Raj wrote: > > > > apply the solutions they may work for ubuntu > > > > On Tue, Aug 1, 2017 at 11:33 PM, Riko Ho <antonius.riko@gmail.com> > wrote: > > > > Dear Yocto Team Member, > > > > I'm building with Ubuntu 16 > > > > > > On 02/08/17 14:31, Khem Raj wrote: > > > > On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.riko@gmail.com> > wrote: > > > > Dear Yocto Team Member, > > > > That's the branch : > > > > ====== > > > > meta-poky > > meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f" > > openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" > > meta-openembedded > > meta-oe > > meta-xfce > > meta-gnome > > meta-python > > meta-multimedia > > meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" > > meta-browser = > > "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" > > meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" > > > > Initialising tasks: 100% > > |########################################################### > #####################################################################| > > Time: 0:00:08 > > NOTE: Executing SetScene Tasks > > NOTE: Executing RunQueue Tasks > > ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed > > ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile > (log > > file is located at > > /home/bianchi77/poky/build/tmp/work/x86_64-linux/ > automake-native/1.15-r0/temp/log.do_compile.9291) > > ERROR: Logfile of failure stored in: > > /home/bianchi77/poky/build/tmp/work/x86_64-linux/ > automake-native/1.15-r0/temp/log.do_compile.9291 > > Log data follows: > > | DEBUG: Executing shell function do_compile > > | NOTE: Using icecc > > | NOTE: make -j 10 > > | ERROR: oe_runmake failed > > | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { > > PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/ > automake-native/1.15-r0/build/t/wrap:'$PATH > > && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man > > --output=doc/automake-1.15.1 automake-1.15 > > | help2man: can't get `--help' info from automake-1.15 > > > > What OS do you run on build machine ? > > if its archlinux then apply this patch to automake > > > > https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a > > > > otherwise if its centos7 then install > > > > yum install perl-Thread-Queue > > > > > > > > | Try `--no-discard-stderr' if option outputs to stderr > > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > > | make: *** [doc/automake-1.15.1] Error 255 > > | ERROR: Function failed: do_compile (log file is located at > > /home/bianchi77/poky/build/tmp/work/x86_64-linux/ > automake-native/1.15-r0/temp/log.do_compile.9291) > > ERROR: Task > > (virtual:native:/home/bianchi77/poky/meta/recipes- > devtools/automake/automake_1.15.bb:do_compile) > > failed with exit code '1' > > NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be > > rerun and 1 failed. > > > > Summary: 1 task failed: > > > > virtual:native:/home/bianchi77/poky/meta/recipes- > devtools/automake/automake_1.15.bb:do_compile > > Summary: There were 4 WARNING messages shown. > > Summary: There were 2 ERROR messages shown, returning a non-zero exit > code. > > bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ > > > > How can I fix that automake error ? > > > > I tried to run bitbake core-image-minimal for it. > > Thanks, > > > > On 31/07/17 21:26, Burton, Ross wrote: > > > > Then the branch you checked out. git branch will tell you. > > > > Ross > > > > On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: > > > > Git clone ... > > > > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > > > > How did you get poky? > > > > Ross > > > > On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: > > > > How can I see my branch? > > > > On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: > > > > On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: > > > > Is my auto make disabled with icecc ? > > > > How to make it enable ? thanks. > > > > That's just a debug message. > > > > | help2man: can't get `--help' info from automake-1.15 > > | Try `--no-discard-stderr' if option outputs to stderr > > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > > > > That's the error your hitting. > > > > I think you need to update to the latest commit for the branch you're > > on, there was a problem with modern perl in help2man. What > release/branch > > are you using? > > > > Ross > > > > > > -- > > > > /*******/ > > Sent by Ubuntu LTS 16.04, > > Kind regards, > > Riko Ho > > /*******/ > > > > > > -- > > _______________________________________________ > > yocto mailing list > > yocto@yoctoproject.org > > https://lists.yoctoproject.org/listinfo/yocto > > > > > > -- > > > > /*******/ > > Sent by Ubuntu LTS 16.04, > > Kind regards, > > Riko Ho > > /*******/ > > > > > > -- > > > > /*******/ > > Sent by Ubuntu LTS 16.04, > > Kind regards, > > Riko Ho > > /*******/ > [-- Attachment #2: Type: text/html, Size: 7953 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 15:01 ` Riko Ho @ 2017-09-14 7:06 ` Yasushi SHOJI 2017-09-14 8:04 ` Yusuke Mitsuki 1 sibling, 0 replies; 27+ messages in thread From: Yasushi SHOJI @ 2017-09-14 7:06 UTC (permalink / raw) To: Riko Ho; +Cc: yocto Hi, On Thu, Aug 3, 2017 at 12:01 AM, Riko Ho <antonius.riko@gmail.com> wrote: > Still got the same error after installing it? Any other clues? Did you try the patch posted by Khem Raj? https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a I had the same problem on my Debian Unstable but the patch worked for me. I wonder why it's not merged yet, though. -- yashi ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: DEBUG: automake-native: class native found in blacklist, disable icecc ? 2017-08-02 15:01 ` Riko Ho 2017-09-14 7:06 ` Yasushi SHOJI @ 2017-09-14 8:04 ` Yusuke Mitsuki 1 sibling, 0 replies; 27+ messages in thread From: Yusuke Mitsuki @ 2017-09-14 8:04 UTC (permalink / raw) To: Riko Ho; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 6395 bytes --] Hi Riko It seems you use, poky: pyro meta-openembedded:master I think that you should checkout meta-openembedded to pyro branch. You can get by command like a follows, $ cd meta-openembedded $ git checkout -b pyro origin/pyro Otherwise, checkout poky to master... I hope your helps. 2017/08/03 0:05 "Riko Ho" <antonius.riko@gmail.com>: > Still got the same error after installing it? Any other clues? > On Aug 2, 2017 9:53 PM, "Khem Raj" <raj.khem@gmail.com> wrote: > >> On Tue, Aug 1, 2017 at 11:42 PM, Riko Ho <antonius.riko@gmail.com> wrote: >> > Could it be this one ? >> > >> > https://www.devmanuals.net/install/ubuntu/ubuntu-12-04-lts- >> precise-pangolin/install-libthread-queue-perl.html >> > >> >> yes >> >> > Thanks >> > >> > >> > On 02/08/17 14:38, Khem Raj wrote: >> > >> > apply the solutions they may work for ubuntu >> > >> > On Tue, Aug 1, 2017 at 11:33 PM, Riko Ho <antonius.riko@gmail.com> >> wrote: >> > >> > Dear Yocto Team Member, >> > >> > I'm building with Ubuntu 16 >> > >> > >> > On 02/08/17 14:31, Khem Raj wrote: >> > >> > On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.riko@gmail.com> >> wrote: >> > >> > Dear Yocto Team Member, >> > >> > That's the branch : >> > >> > ====== >> > >> > meta-poky >> > meta-yocto-bsp = "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f" >> > openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd" >> > meta-openembedded >> > meta-oe >> > meta-xfce >> > meta-gnome >> > meta-python >> > meta-multimedia >> > meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74" >> > meta-browser = >> > "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e" >> > meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982" >> > >> > Initialising tasks: 100% >> > |########################################################### >> #####################################################################| >> > Time: 0:00:08 >> > NOTE: Executing SetScene Tasks >> > NOTE: Executing RunQueue Tasks >> > ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed >> > ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile >> (log >> > file is located at >> > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake- >> native/1.15-r0/temp/log.do_compile.9291) >> > ERROR: Logfile of failure stored in: >> > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake- >> native/1.15-r0/temp/log.do_compile.9291 >> > Log data follows: >> > | DEBUG: Executing shell function do_compile >> > | NOTE: Using icecc >> > | NOTE: make -j 10 >> > | ERROR: oe_runmake failed >> > | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && { >> > PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/autom >> ake-native/1.15-r0/build/t/wrap:'$PATH >> > && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man >> > --output=doc/automake-1.15.1 automake-1.15 >> > | help2man: can't get `--help' info from automake-1.15 >> > >> > What OS do you run on build machine ? >> > if its archlinux then apply this patch to automake >> > >> > https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a >> > >> > otherwise if its centos7 then install >> > >> > yum install perl-Thread-Queue >> > >> > >> > >> > | Try `--no-discard-stderr' if option outputs to stderr >> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >> > | make: *** [doc/automake-1.15.1] Error 255 >> > | ERROR: Function failed: do_compile (log file is located at >> > /home/bianchi77/poky/build/tmp/work/x86_64-linux/automake- >> native/1.15-r0/temp/log.do_compile.9291) >> > ERROR: Task >> > (virtual:native:/home/bianchi77/poky/meta/recipes-devtools/ >> automake/automake_1.15.bb:do_compile) >> > failed with exit code '1' >> > NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be >> > rerun and 1 failed. >> > >> > Summary: 1 task failed: >> > >> > virtual:native:/home/bianchi77/poky/meta/recipes-devtools/ >> automake/automake_1.15.bb:do_compile >> > Summary: There were 4 WARNING messages shown. >> > Summary: There were 2 ERROR messages shown, returning a non-zero exit >> code. >> > bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ >> > >> > How can I fix that automake error ? >> > >> > I tried to run bitbake core-image-minimal for it. >> > Thanks, >> > >> > On 31/07/17 21:26, Burton, Ross wrote: >> > >> > Then the branch you checked out. git branch will tell you. >> > >> > Ross >> > >> > On 31 July 2017 at 14:17, Riko Ho <antonius.riko@gmail.com> wrote: >> > >> > Git clone ... >> > >> > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >> > >> > How did you get poky? >> > >> > Ross >> > >> > On 31 July 2017 at 14:14, Riko Ho <antonius.riko@gmail.com> wrote: >> > >> > How can I see my branch? >> > >> > On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.burton@intel.com> wrote: >> > >> > On 31 July 2017 at 03:33, Riko Ho <antonius.riko@gmail.com> wrote: >> > >> > Is my auto make disabled with icecc ? >> > >> > How to make it enable ? thanks. >> > >> > That's just a debug message. >> > >> > | help2man: can't get `--help' info from automake-1.15 >> > | Try `--no-discard-stderr' if option outputs to stderr >> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >> > >> > That's the error your hitting. >> > >> > I think you need to update to the latest commit for the branch you're >> > on, there was a problem with modern perl in help2man. What >> release/branch >> > are you using? >> > >> > Ross >> > >> > >> > -- >> > >> > /*******/ >> > Sent by Ubuntu LTS 16.04, >> > Kind regards, >> > Riko Ho >> > /*******/ >> > >> > >> > -- >> > _______________________________________________ >> > yocto mailing list >> > yocto@yoctoproject.org >> > https://lists.yoctoproject.org/listinfo/yocto >> > >> > >> > -- >> > >> > /*******/ >> > Sent by Ubuntu LTS 16.04, >> > Kind regards, >> > Riko Ho >> > /*******/ >> > >> > >> > -- >> > >> > /*******/ >> > Sent by Ubuntu LTS 16.04, >> > Kind regards, >> > Riko Ho >> > /*******/ >> > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > [-- Attachment #2: Type: text/html, Size: 9889 bytes --] ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2017-09-14 8:04 UTC | newest] Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-07-28 5:56 Icecc configuration on mpich ? Riko Ho 2017-07-28 6:13 ` Josef Holzmayr 2017-07-28 6:17 ` Riko Ho 2017-07-28 6:22 ` Josef Holzmayr 2017-07-28 6:27 ` Riko Ho 2017-07-28 6:30 ` Riko Ho 2017-07-28 6:36 ` Josef Holzmayr 2017-07-28 6:42 ` Riko Ho 2017-07-28 8:02 ` Riko Ho 2017-07-31 2:12 ` Icecc configuration on ubuntu ? Riko Ho 2017-07-31 2:33 ` DEBUG: automake-native: class native found in blacklist, disable icecc ? Riko Ho 2017-07-31 13:12 ` Burton, Ross 2017-07-31 13:14 ` Riko Ho 2017-07-31 13:15 ` Burton, Ross 2017-07-31 13:17 ` Riko Ho 2017-07-31 13:20 ` Riko Ho 2017-07-31 13:26 ` Burton, Ross 2017-08-01 3:13 ` Riko Ho 2017-08-02 6:18 ` Riko Ho 2017-08-02 6:31 ` Khem Raj 2017-08-02 6:33 ` Riko Ho 2017-08-02 6:38 ` Khem Raj 2017-08-02 6:42 ` Riko Ho 2017-08-02 13:52 ` Khem Raj 2017-08-02 15:01 ` Riko Ho 2017-09-14 7:06 ` Yasushi SHOJI 2017-09-14 8:04 ` Yusuke Mitsuki
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.