* [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe
@ 2019-07-24 14:50 Pablo Saavedra
2019-07-24 14:50 ` [meta-openembedded][PATCH v5 2/7] ibus: add ibus recipe Pablo Saavedra
` (6 more replies)
0 siblings, 7 replies; 11+ messages in thread
From: Pablo Saavedra @ 2019-07-24 14:50 UTC (permalink / raw)
To: openembedded-devel
The chinese pinyin and bopomofo conversion library
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
---
meta-oe/recipes-support/pyzy/pyzy_git.bb | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 meta-oe/recipes-support/pyzy/pyzy_git.bb
diff --git a/meta-oe/recipes-support/pyzy/pyzy_git.bb b/meta-oe/recipes-support/pyzy/pyzy_git.bb
new file mode 100644
index 000000000..2a1df6187
--- /dev/null
+++ b/meta-oe/recipes-support/pyzy/pyzy_git.bb
@@ -0,0 +1,21 @@
+DESCRIPTION = "The Chinese PinYin and Bopomofo conversion library"
+LICENSE = "LGPL-2.1"
+LIC_FILES_CHKSUM = "file://COPYING;md5=4b54a1fd55a448865a0b32d41598759d"
+SECTION = "inputmethods"
+
+SRCREV = "6d9c3cdff364e0da75e1c26222240f26370ebf73"
+SRC_URI = "git://github.com/pyzy/pyzy.git;protocol=https;branch=master"
+
+S = "${WORKDIR}/git"
+
+inherit autotools pkgconfig
+
+DEPENDS = "glib-2.0 util-linux sqlite3"
+
+EXTRA_OECONF += " \
+ --disable-opencc \
+ --disable-db-open-phrase \
+ --disable-db-android \
+"
+
+BBCLASSEXTEND = "native"
--
2.11.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [meta-openembedded][PATCH v5 2/7] ibus: add ibus recipe 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra @ 2019-07-24 14:50 ` Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 3/7] ibus-anthy: add ibus-anthy recipe Pablo Saavedra ` (5 subsequent siblings) 6 siblings, 0 replies; 11+ messages in thread From: Pablo Saavedra @ 2019-07-24 14:50 UTC (permalink / raw) To: openembedded-devel Intelligent Input Bus for Linux/Unix https://github.com/ibus/ibus/wiki Collision with: https://patchwork.openembedded.org/patch/155947/ Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> --- meta-oe/recipes-support/ibus/ibus_1.5.19.bb | 97 +++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 meta-oe/recipes-support/ibus/ibus_1.5.19.bb diff --git a/meta-oe/recipes-support/ibus/ibus_1.5.19.bb b/meta-oe/recipes-support/ibus/ibus_1.5.19.bb new file mode 100644 index 000000000..57afe0ade --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus_1.5.19.bb @@ -0,0 +1,97 @@ +DESCRIPTION = "A multilingual user input method library" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=fbc093901857fcd118f065f900982c24" +SECTION = "inputmethods" + +SRC_URI = "https://github.com/ibus/ibus/releases/download/${PV}/${BPN}-${PV}.tar.gz \ + " +SRC_URI[md5sum] = "a2be6f200dd9ada2501474a6877a73ef" +SRC_URI[sha256sum] = "4b66c798dab093f0fa738e5c10688d395a463287d13678c208a81051af5d2429" + +inherit autotools pkgconfig gettext gtk-immodules-cache gobject-introspection gtk-doc gtk-icon-cache gsettings + +REQUIRED_DISTRO_FEATURES = "x11" + +DEPENDS = " intltool dbus-glib python3-dbus iso-codes dconf libnotify python3-pygobject adwaita-icon-theme librsvg" +DEPENDS_append_class-target = " intltool-native python-pygobject-native" +RDEPENDS_${PN} += " iso-codes adwaita-icon-theme librsvg-gtk" + +PACKAGECONFIG[gtk+] = ",--disable-gtk2,gtk+,gtk+" +PACKAGECONFIG[gtk+3] = ",--disable-gtk3,gtk+3,gtk+3" +PACKAGECONFIG[wayland] = "--enable-wayland,,wayland,wayland" + +PACKAGECONFIG ?= "gtk+ gtk+3" +PACKAGECONFIG += "${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}" + +GTKIMMODULES_PACKAGES += "${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'ibus-gtk2.0', '', d)}" +GTKIMMODULES_PACKAGES += "${@bb.utils.contains('PACKAGECONFIG', 'gtk+3', 'ibus-gtk3', '', d)}" + +EXTRA_OECONF += " \ + --disable-emoji-dict \ + --disable-unicode-dict \ +" + +BBCLASSEXTEND = "native pythonnative" + +FILES_${PN} += " \ + ${sysconfdir}/dconf/profile \ + ${sysconfdir}/dconf/db/ibus.d/00-upstream-settings \ + ${sysconfdir}/dconf/profile/ibus \ + ${libdir}/libibus-1.0.so.5.0.518 \ + ${libdir}/libibus-1.0.so.5 \ + ${libdir}/gtk-?.?/*/immodules/im-ibus.so \ + ${bindir}/ibus \ + ${bindir}/ibus-setup \ + ${bindir}/ibus-daemon \ + ${datadir}/ibus/engine \ + ${datadir}/ibus/component \ + ${datadir}/ibus/setup \ + ${datadir}/ibus/component/gtkpanel.xml \ + ${datadir}/ibus/component/simple.xml \ + ${datadir}/ibus/component/dconf.xml \ + ${datadir}/ibus/setup/emojilang.py \ + ${datadir}/ibus/setup/main.py \ + ${datadir}/ibus/setup/enginecombobox.py \ + ${datadir}/ibus/setup/setup.ui \ + ${datadir}/ibus/setup/enginedialog.py \ + ${datadir}/ibus/setup/i18n.py \ + ${datadir}/ibus/setup/engineabout.py \ + ${datadir}/ibus/setup/icon.py \ + ${datadir}/ibus/setup/keyboardshortcut.py \ + ${datadir}/ibus/setup/enginetreeview.py \ + ${datadir}/ibus/keymaps/jp \ + ${datadir}/ibus/keymaps/kr \ + ${datadir}/ibus/keymaps/common \ + ${datadir}/ibus/keymaps/modifiers \ + ${datadir}/ibus/keymaps/us \ + ${datadir}/ibus/keymaps/in \ + ${datadir}/applications/ibus-setup.desktop \ + ${datadir}/dbus-1/services/org.freedesktop.IBus.service \ + ${datadir}/dbus-1/services/org.freedesktop.portal.IBus.service \ + ${datadir}/vala/vapi/ibus-1.0.vapi \ + ${datadir}/vala/vapi/ibus-1.0.deps \ + ${libexecdir}/ibus-engine-simple \ + ${libexecdir}/ibus-portal \ + ${libexecdir}/ibus-dconf \ + ${libexecdir}/ibus-x11 \ + ${libexecdir}/ibus-ui-gtk3 \ + ${datadir}/GConf/gsettings/ibus.convert \ + ${datadir}/glib-2.0/schemas/org.freedesktop.ibus.gschema.xml \ + ${datadir}/bash-completion/* \ + ${datadir}/icons/* \ + ${libdir}/python?.?/????-packages/gi/overrides/IBus.py \ + ${libdir}/python?.?/????-packages/gi/overrides/IBus.py? \ +" + +do_configure_prepend() { + export PYTHON=python3 +} + +do_install_append() { + # Fix the installation path of the GObject Inspection overrides for Python3 + python_version=$(python3 -c 'import sys; print("%s.%s" % (sys.version_info.major, sys.version_info.minor))') + mkdir -p ${D}/usr/lib/python${python_version}/site-packages/gi/overrides + cp ${S}/bindings/pygobject/gi/overrides/IBus.py ${D}/usr/lib/python${python_version}/site-packages/gi/overrides/ + rm -rf ${D}/${RECIPE_SYSROOT_NATIVE}/usr/lib/python${python_version}/site-packages/gi/overrides + find ${D} -type d -empty -delete +} -- 2.11.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [meta-openembedded][PATCH v5 3/7] ibus-anthy: add ibus-anthy recipe 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 2/7] ibus: add ibus recipe Pablo Saavedra @ 2019-07-24 14:50 ` Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 4/7] ibus-pinyin: add ibus-pinyin recipe Pablo Saavedra ` (4 subsequent siblings) 6 siblings, 0 replies; 11+ messages in thread From: Pablo Saavedra @ 2019-07-24 14:50 UTC (permalink / raw) To: openembedded-devel It is a Japanese input engine for IBus. Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> --- .../ibus/ibus-anthy/fix_anthy_include_in_gir.patch | 19 +++++++++++ meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb | 37 ++++++++++++++++++++++ 2 files changed, 56 insertions(+) create mode 100644 meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch create mode 100644 meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb diff --git a/meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch b/meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch new file mode 100644 index 000000000..9812be08f --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch @@ -0,0 +1,19 @@ +Index: ibus-anthy-1.5.10/gir/Makefile.am +=================================================================== +--- ibus-anthy-1.5.10.orig/gir/Makefile.am ++++ ibus-anthy-1.5.10/gir/Makefile.am +@@ -68,12 +68,12 @@ Anthy_9000_gir_SCANNERFLAGS = \ + --warn-all \ + $(NULL) + Anthy_9000_gir_INCLUDES = GObject-2.0 +-Anthy_9000_gir_LIBS = $(libanthygobject) anthy ++Anthy_9000_gir_LIBS = $(libanthygobject) + Anthy_9000_gir_CFLAGS = @ANTHY_CFLAGS@ + Anthy_9000_gir_FILES = \ + $(libanthygobject_1_0_la_SOURCES) \ + $(anthyinclude_HEADERS) \ +- $(ANTHY_INCLUDEDIR)/anthy/anthy.h \ ++ $(STAGING_DIR_HOST)$(ANTHY_INCLUDEDIR)/anthy/anthy.h \ + $(NULL) + INTROSPECTION_GIRS += Anthy-9000.gir + diff --git a/meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb b/meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb new file mode 100644 index 000000000..d42f87ae5 --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb @@ -0,0 +1,37 @@ +DESCRIPTION = "It is a Japanese input engine for IBus." +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" +SECTION = "inputmethods" + +SRC_URI = "https://github.com/ibus/${PN}/releases/download/${PV}/${PN}-${PV}.tar.gz \ + file://fix_anthy_include_in_gir.patch \ +" +SRC_URI[md5sum] = "d7c2c410619edacfbaca6a9d02ed8982" +SRC_URI[sha256sum] = "cc33e0d1afe7e4a1f0a092d2a4575269ac21373771e49579c434afb4eef9f84a" + +# Needed to find the Anthy included headers (anthy/anthy.h) +export STAGING_DIR_HOST + +inherit autotools pkgconfig gettext gobject-introspection gtk-immodules-cache gtk-icon-cache gsettings qemu + +REQUIRED_DISTRO_FEATURES = "x11" + +DEPENDS = " anthy ibus gobject-introspection adwaita-icon-theme" +RDEPENDS_${PN} += " ibus takao-fonts anthy libanthy0" + +DEPENDS_append_class-target = " intltool-native qemu-native" + +do_configure_prepend() { + export PYTHON=python2 +} + + +FILES_${PN} += " \ + ${datadir}/icons/* \ + ${datadir}/ibus \ + ${datadir}/appdata \ + ${datadir}/ibus/component/anthy.xml \ + ${datadir}/appdata/ibus-anthy.appdata.xml \ + ${datadir}/gir-1.0/Anthy-9000.gir \ + ${datadir}/glib-2.0/schemas/org.freedesktop.ibus.engine.anthy.gschema.xml \ +" -- 2.11.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [meta-openembedded][PATCH v5 4/7] ibus-pinyin: add ibus-pinyin recipe 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 2/7] ibus: add ibus recipe Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 3/7] ibus-anthy: add ibus-anthy recipe Pablo Saavedra @ 2019-07-24 14:50 ` Pablo Saavedra 2019-07-25 14:53 ` Khem Raj 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 5/7] ibus-table: add ibus-table recipe Pablo Saavedra ` (3 subsequent siblings) 6 siblings, 1 reply; 11+ messages in thread From: Pablo Saavedra @ 2019-07-24 14:50 UTC (permalink / raw) To: openembedded-devel PinYin engine for IBus. Requires: pyzy Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> --- meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb diff --git a/meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb b/meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb new file mode 100644 index 000000000..a91ed33cb --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb @@ -0,0 +1,30 @@ +DESCRIPTION = "PinYin engine for IBus." +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" +SECTION = "inputmethods" + +SRC_URI = "https://github.com/ibus/${PN}/archive/${PV}.tar.gz \ + " +SRC_URI[md5sum] = "9a794c76f3e8fa888c7a0a097de2ebf0" +SRC_URI[sha256sum] = "79fc51517ab8dec696cbbbca9526459b59f4eb045492ea88e5f9e01160b905db" + +inherit distro_features_check autotools lib_package + +REQUIRED_DISTRO_FEATURES = "x11" + +DEPENDS = "ibus enchant hunspell pyzy pyxdg" +DEPENDS_append_class-target = " intltool-native glib-2.0-native" +RDEPENDS_${PN} += " ibus enchant hunspell pyzy pyxdg" + +BBCLASSEXTEND = "native" + +EXTRA_OECONF += "--disable-static \ + --disable-boost \ +" + +FILES_${PN} += "${datadir}/ibus/component/pinyin.xml \ +" + +do_configure_prepend() { + export PYTHON=python3 +} -- 2.11.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [meta-openembedded][PATCH v5 4/7] ibus-pinyin: add ibus-pinyin recipe 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 4/7] ibus-pinyin: add ibus-pinyin recipe Pablo Saavedra @ 2019-07-25 14:53 ` Khem Raj 0 siblings, 0 replies; 11+ messages in thread From: Khem Raj @ 2019-07-25 14:53 UTC (permalink / raw) To: Pablo Saavedra; +Cc: openembeded-devel On Wed, Jul 24, 2019 at 7:59 AM Pablo Saavedra <psaavedra@igalia.com> wrote: > > PinYin engine for IBus. > > Requires: pyzy > > Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> > --- > meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb | 30 +++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb > > diff --git a/meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb b/meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb > new file mode 100644 > index 000000000..a91ed33cb > --- /dev/null > +++ b/meta-oe/recipes-support/ibus/ibus-pinyin_1.5.0.bb > @@ -0,0 +1,30 @@ > +DESCRIPTION = "PinYin engine for IBus." > +LICENSE = "GPLv2" > +LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" > +SECTION = "inputmethods" > + > +SRC_URI = "https://github.com/ibus/${PN}/archive/${PV}.tar.gz \ causes WARNING: ibus-pinyin-1.5.0-r0 do_package_qa: QA Issue: https://github.com/ibus/ibus-pinyin/archive/1.5.0.tar.gz : SRC_URI uses unstable GitHub archives [src-uri-bad] Lets use git:// fetcher instead of archive > + " > +SRC_URI[md5sum] = "9a794c76f3e8fa888c7a0a097de2ebf0" > +SRC_URI[sha256sum] = "79fc51517ab8dec696cbbbca9526459b59f4eb045492ea88e5f9e01160b905db" > + > +inherit distro_features_check autotools lib_package > + > +REQUIRED_DISTRO_FEATURES = "x11" > + > +DEPENDS = "ibus enchant hunspell pyzy pyxdg" > +DEPENDS_append_class-target = " intltool-native glib-2.0-native" > +RDEPENDS_${PN} += " ibus enchant hunspell pyzy pyxdg" > + > +BBCLASSEXTEND = "native" > + > +EXTRA_OECONF += "--disable-static \ > + --disable-boost \ > +" > + > +FILES_${PN} += "${datadir}/ibus/component/pinyin.xml \ > +" > + > +do_configure_prepend() { > + export PYTHON=python3 > +} > -- > 2.11.0 > > -- > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* [meta-openembedded][PATCH v5 5/7] ibus-table: add ibus-table recipe 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra ` (2 preceding siblings ...) 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 4/7] ibus-pinyin: add ibus-pinyin recipe Pablo Saavedra @ 2019-07-24 14:50 ` Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 6/7] ibus-table-chinese: add ibus-table-chinese recipe Pablo Saavedra ` (2 subsequent siblings) 6 siblings, 0 replies; 11+ messages in thread From: Pablo Saavedra @ 2019-07-24 14:50 UTC (permalink / raw) To: openembedded-devel Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> --- meta-oe/recipes-support/ibus/ibus-table_1.9.21.bb | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 meta-oe/recipes-support/ibus/ibus-table_1.9.21.bb diff --git a/meta-oe/recipes-support/ibus/ibus-table_1.9.21.bb b/meta-oe/recipes-support/ibus/ibus-table_1.9.21.bb new file mode 100644 index 000000000..faa331031 --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-table_1.9.21.bb @@ -0,0 +1,29 @@ +DESCRIPTION = "framework for table based input methods using IBus" +LICENSE = "LGPLv2.1" +LIC_FILES_CHKSUM = "file://COPYING;md5=fbc093901857fcd118f065f900982c24" +SECTION = "inputmethods" + +SRC_URI = "https://github.com/kaio/${PN}/releases/download/${PV}/${PN}-${PV}.tar.gz \ + " +SRC_URI[md5sum] = "1f7b3fab7271e409c9ef4c43f5c3fc78" +SRC_URI[sha256sum] = "017bcd1cb9f5a79df46d1e4ac28f166ce2338938a2037ebe86783da0abca0c24" + +inherit distro_features_check autotools gettext lib_package gsettings + +DEPENDS = " ibus" +RDEPENDS_${PN} += " ibus" + +BBCLASSEXTEND = "native" + +do_configure_prepend() { + export PYTHON=python3 +} + +FILES_${PN} += "${datadir}/ibus/component/pinyin.xml \ + ${datadir}/metainfo \ + ${datadir}/ibus \ + ${datadir}/glib-2.0 \ + ${datadir}/metainfo/ibus-table.appdata.xml \ + ${datadir}/ibus/component/table.xml \ + ${datadir}/glib-2.0/schemas/org.freedesktop.ibus.engine.table.gschema.xml \ +" -- 2.11.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [meta-openembedded][PATCH v5 6/7] ibus-table-chinese: add ibus-table-chinese recipe 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra ` (3 preceding siblings ...) 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 5/7] ibus-table: add ibus-table recipe Pablo Saavedra @ 2019-07-24 14:50 ` Pablo Saavedra 2019-07-25 14:01 ` Khem Raj 2019-07-24 14:51 ` [meta-openembedded][PATCH v5 7/7] ibus: Bumping up to 1.5.20 Pablo Saavedra 2019-07-25 14:50 ` [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Khem Raj 6 siblings, 1 reply; 11+ messages in thread From: Pablo Saavedra @ 2019-07-24 14:50 UTC (permalink / raw) To: openembedded-devel Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> --- .../0001-revert-CMakeLists.txt.patch | 204 ++ .../ibus/ibus-table-chinese/0002-add-Modules.patch | 2933 ++++++++++++++++++++ .../0003-add-ChangeLog.prev.patch | 58 + .../0005-fix-cmake-cross-compile.patch | 130 + .../ibus/ibus-table-chinese_1.8.2.bb | 82 + 5 files changed, 3407 insertions(+) create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch new file mode 100644 index 000000000..d677dc49a --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch @@ -0,0 +1,204 @@ +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -1,17 +1,20 @@ + cmake_minimum_required(VERSION 2.6.2) + +-# Included scripts do automatic cmake_policy PUSH and POP. +-# OLD: CMake policy in included script will affect the invoker. +-# CMAKE_POLICY(SET CMP0011 OLD) ++# CMP0011 should be set here, otherwise policy set in module won't affect ++# here. ++CMAKE_POLICY(SET CMP0011 OLD) + + # Default CMAKE_INSTALL_PREFIX should be set before PROJECT() + SET(CMAKE_INSTALL_PREFIX "/usr" CACHE PATH "Install dir prefix") + + # Whether to build on fedora +-SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "1" CACHE STRING "Enable fedora build") ++SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "0" CACHE STRING "Enable fedora build") + +-# Message level INFO1 (5) +-SET(MANAGE_MESSAGE_LEVEL 5 CACHE STRING "Message (Verbose) Level") ++# Message level M_OFF (4) ++SET(MANAGE_MESSAGE_LEVEL 4 CACHE STRING "Message (Verbose) Level") ++ ++# Default support Gnome shell ++SET(GNOME_SHELL 1) + + #################################################################### + # Project specific information +@@ -19,34 +22,20 @@ + PROJECT(ibus-table-chinese NONE) + SET(PRJ_SUMMARY "Chinese input tables for IBus") + +-SET(SUMMARY_TRANSLATIONS +- "zh_CN" "中文码表输入法" +- "zh_TW" "中文碼表輸入法" +- ) +- + SET(PRJ_DESCRIPTION + "ibus-table-chinese is provides the infrastructure for Chinese input methods. + Input tables themselves are in subpackages." + ) + +-SET(DESCRIPTION_TRANSLATIONS +- "zh_TW" "ibus-table-chinese 提供了中文碼表輸入法的基礎架構。 +- 輸入法本身則在子套件裡。" +- ) +- + SET(AUTHORS "Yuwei Yu, Caius 'kaio' Chance, Ding-Yi Chen") + SET(MAINTAINER "Ding-Yi Chen <dchen@redhat.com>") + SET(VENDOR "Red Hat, Inc") + SET(LICENSE "GPLv3+") +-SET(PRJ_GROUP "System Environment/Libraries") +-SET(BUILD_ARCH "noarch") +-SET(RPM_SPEC_URL "http://code.google.com/p/ibus/") +-SET(RPM_SPEC_SOURCES "https://fedorahosted.org/releases/c/m/%{name}/%{name}-%{version}-Source.tar.gz") + + #################################################################### + # Includes + # +-LIST(INSERT CMAKE_MODULE_PATH 0 ${CMAKE_SOURCE_DIR}/Modules) ++SET(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/Modules ${CMAKE_ROOT}/Modules ) + + # Create a link if Modules/ does not exists + IF(EXISTS ${CMAKE_SOURCE_DIR}/cmake-fedora/Modules) +@@ -63,6 +52,7 @@ + SET(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Library dir") + ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") + SET(LIBEXEC_DIR "${LIB_DIR}" CACHE PATH "LIBEXEC dir") ++ MESSAGE("*Hi") + ENDIF(NOT CMAKE_FEDORA_ENABLE_FEDORA_BUILD) + + INCLUDE(ManageEnvironment RESULT_VARIABLE MANAGE_ENVIRONMENT_PATH) +@@ -77,56 +67,82 @@ + + INCLUDE(ManageVersion) + RELEASE_NOTES_READ_FILE() +-INCLUDE(ManageArchive) +-INCLUDE(ManageFile) +-INCLUDE(ManageSourceVersionControl) +-INCLUDE(ManageTarget) +-INCLUDE(ManageTranslation) + INCLUDE(ManageUninstall) +-ENABLE_TESTING() + + #################################################################### +-# Dependencies ++# Required + # + +-INCLUDE(ManageDependency) +-## Requires +-MANAGE_DEPENDENCY(REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED) +- +-## Build Requires +-MANAGE_DEPENDENCY(BUILD_REQUIRES CMAKE VER "2.6.2" REQUIRED) +-MANAGE_DEPENDENCY(BUILD_REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED DEVEL) +-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} REQUIRES) +-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} BUILD_REQUIRES) ++FIND_PACKAGE(PkgConfig) ++PKG_CHECK_MODULES(IBUS_TABLE REQUIRED ibus-table>=1.2) + + #################################################################### + # Building + # ++ + ADD_SUBDIRECTORY(tables) + + #################################################################### + # Installing + # + +-MANAGE_SOURCE_VERSION_CONTROL_GIT() ++# Install docs ++# Note: Need to use filename only, otherwise ++# ${CMAKE_SOURCE_DIR}/RELEASE-NOTES.txt will be deleted in spec ++# ++ ++GET_FILENAME_COMPONENT(_releaseFileName "${RELEASE_FILE}" NAME) ++SET(INSTALL_DOCS ${_releaseFileName} AUTHORS README ChangeLog COPYING README) ++STRING_JOIN(PRJ_DOC_LIST " " ${INSTALL_DOCS}) ++ ++INSTALL(FILES ${INSTALL_DOCS} ++ DESTINATION "${PRJ_DOC_DIR}") + +-INSTALL(FILES AUTHORS README ChangeLog COPYING DESTINATION ${PRJ_DOC_DIR}) ++#################################################################### ++# Source Version Control ++# ++INCLUDE(ManageSourceVersionControl) ++MANAGE_SOURCE_VERSION_CONTROL_GIT() + + #################################################################### + # Packing + # ++INCLUDE(ManageArchive) + +-## Pack Source +-SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES CACHE PATH "Source Archive Dir") +-PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}" +- GITIGNORE ${CMAKE_SOURCE_DIR}/.gitignore ++IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) ++ INCLUDE(ManageRPM) ++ INCLUDE(ManageReleaseFedora) ++ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) ++INCLUDE(ManageRelease) ++ ++SET(PRJ_IGNORE_FILES_COMMON ++ "/doc/" "\\\\.spec$" "messages.po$" "\\\\.orig$" "/cmake-fedora/" ++ "/\\\\.cache/" ++ "\\\\.db$" ++ ) ++ ++LIST(APPEND PRJ_IGNORE_FILES_COMMON ++ "\\\\.utf8$" "\\\\.tmp$" "\\\\.freq$" "\\\\.tab$" ++ "tables/array/.*\\\\.head$" ++ "array30.txt" "array30-big.txt" "wubi-haifeng86.txt" + ) + +-## Pack RPM ++LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ++ ${PRJ_IGNORE_FILES_COMMON} "/bin/" "\\\\.xml$" "\\\\.schemas") ++ ++IF(RPM_BUILD_SOURCES) ++ SET(SOURCE_ARCHIVE_DIR ${RPM_BUILD_SOURCES}) ++ELSE(RPM_BUILD_SOURCES) ++ SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES) ++ENDIF(RPM_BUILD_SOURCES) ++ ++PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}") + IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) +- SET(RPM_BUILD_SOURCES ${SOURCE_ARCHIVE_DIR}) +- INCLUDE(ManageRPM) +- PACK_RPM(SPEC_IN "SPECS/project.spec.in") ++ PACK_RPM() ++ RELEASE_FEDORA(fedora el6) ++ # "Off" Warning is displayed if mock is not installed. ++ RPM_MOCK_BUILD() ++ MANAGE_RELEASE(release_fedora) + ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) + + #################################################################### +@@ -142,20 +158,10 @@ + #MANAGE_UPLOAD_CMD(scp src UPLOAD_FILES ${SOURCE_ARCHIVE_FILE}) + #ADD_DEPENDENCIES(upload upload_src) + +-INCLUDE(ManageRelease) +-IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) +- INCLUDE(ManageReleaseFedora) +- RELEASE_FEDORA(fedora el6) +- # "Off" Warning is displayed if mock is not installed. +- MANAGE_RELEASE(tag_push release_fedora) +-ELSE(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) +- MANAGE_RELEASE(tag_push) +-ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) +- +- + #################################################################### + # Test Suites. + # ++#ENABLE_TESTING() + #ADD_TEST("Test" test_cmd1) + + diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch new file mode 100644 index 000000000..ffacda683 --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch @@ -0,0 +1,2933 @@ +--- /dev/null ++++ b/Modules/DateTimeFormat.cmake +@@ -0,0 +1,37 @@ ++# - Date/time format module. ++# ++# Included by: ++# ManageVersion ++# ++# Defines the following macros: ++# TODAY(date_var format [locale]) ++# - Get date of today in specified format and locale. ++# * Parameters: ++# date_var: Result date string ++# format: date format for date(1) ++# locale: locale of the string. Use current locale setting if ++# locale is not given. ++# ++# Provides the following variables: ++# TODAY_CHANGELOG: Today in the format that is used in RPM Changelog. ++# e.g. Wed 08 Aug 2010 ++# ++# TODAY_SHORT: Short presentation of today, e.g. 20100818. ++# ++ ++IF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_) ++ SET(_DATE_TIME_FORMAT_CMAKE_ "DEFINED") ++ ++ MACRO(TODAY date_var format) ++ INCLUDE(ManageVariable) ++ SET(_locale ${ARGV2}) ++ IF(_locale) ++ SET(ENV{LC_ALL} ${_locale}) ++ ENDIF(_locale) ++ COMMAND_OUTPUT_TO_VARIABLE(${date_var} date --utc "${format}") ++ ENDMACRO(TODAY date_var format) ++ ++ TODAY(TODAY_CHANGELOG "+%a %b %d %Y" "C") ++ TODAY(TODAY_SHORT "+%Y%m%d" "C") ++ENDIF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageAPIDoc.cmake +@@ -0,0 +1,50 @@ ++# - Mage generated API documents ++# This module is for API document generation, such as doxygen. ++# Defines following macros: ++# MANAGE_APIDOC_DOXYGEN(doxygen_in doc_dir) ++# - This macro generate documents according to doxygen template. ++# Arguments: ++# + doxygen_in: Doxygen template file. ++# + doc_dir: Document source directory to be copied from. ++# Reads following variable: ++# + PRJ_DOC_DIR: Directory for document ++# ++# ++IF(NOT DEFINED _MANAGE_APIDOC_CMAKE_) ++ SET(_MANAGE_APIDOC_CMAKE_ "DEFINED") ++ INCLUDE(ManageMessage) ++ ++ MACRO(MANAGE_APIDOC_DOXYGEN doxygen_in doc_dir) ++ SET(SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES} "/Doxyfile$") ++ SET(_manage_apidoc_doxygen_dependency_missing 0) ++ IF(NOT PRJ_DOC_DIR) ++ M_MSG(${M_OFF} "PRJ_DOC_DIR undefined. Doxygen support disabled.") ++ SET(_manage_apidoc_doxygen_dependency_missing 1) ++ ENDIF(NOT PRJ_DOC_DIR) ++ ++ FIND_PACKAGE(doxygen) ++ IF(NOT PACKAGE_FOUND_NAME) ++ M_MSG(${M_OFF} "Package doxygen not found. Doxygen support disabled.") ++ SET(_manage_apidoc_doxygen_dependency_missing 1) ++ ENDIF(NOT PACKAGE_FOUND_NAME) ++ ++ FIND_PROGRAM(DOXYGEN_CMD doxygen) ++ IF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program doxygen not found. Doxygen support disabled.") ++ SET(_manage_apidoc_doxygen_dependency_missing 1) ++ ENDIF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND") ++ ++ IF(NOT _manage_apidoc_doxygen_dependency_missing) ++ CONFIGURE_FILE(${doxygen_in} Doxyfile) ++ ++ ADD_CUSTOM_TARGET(doxygen ++ COMMAND "${DOXYGEN_CMD}" "Doxyfile" ++ ) ++ ++ INSTALL(DIRECTORY ${doc_dir} ++ DESTINATION "${PRJ_DOC_DIR}" ++ ) ++ ENDIF(NOT _manage_apidoc_doxygen_dependency_missing) ++ ENDMACRO(MANAGE_APIDOC_DOXYGEN doxygen_template) ++ENDIF(NOT DEFINED _MANAGE_APIDOC_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageArchive.cmake +@@ -0,0 +1,179 @@ ++# - Pack source helper module ++# By default CPack pack everything under the source directory, this is usually ++# undesirable. We avoid this by using the sane default ignore list. ++# ++# Includes: ++# ManageVersion ++# CPack ++# ++# Included by: ++# ManageRPM ++# ++# Read and Defines following variable: ++# SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT: Default list of file patterns ++# that are normally exclude from the source package. ++# Override it by setting it before INCLUDE(ManageArchive). ++# Defines following target: ++# pack_remove_old: Remove old source package files. ++# Defines following macro: ++# SOURCE_ARCHIVE(outputDir [generator]) ++# - Pack source files as <projectName>-<PRJ_VER>-Source.<packFormat>, ++# Arguments: ++# + outputDir: Directory to write source archive. ++# + generator: (Optional) Method to make archive. Basically this argument ++# is passed as CPACK_GENERATOR. Default to TGZ. ++# Read following variables: ++# + PROJECT_NAME: Project name ++# + VENDOR: Organization that issue this project. ++# + PRJ_VER: Project version ++# + PRJ_SUMMARY: (Optional) Project summary ++# + SOURCE_ARCHIVE_IGNORE_FILES: A list of regex filename pattern ++# that should be excluded from source archive file. ++# (SOURCE_ARCHIVE_IGNORE_FILE_CMAKE) is already in this list. ++# Define following variables: ++# + SOURCE_ARCHIVE_CONTENTS: List of files to be packed to archive. ++# + SOURCE_ARCHIVE_FILE_EXTENSION: File extension of the source package ++# files. ++# + SOURCE_ARCHIVE_NAME: Name of source archive (without path) ++# + SOURCE_ARCHIVE_FILE: Path to source archive file ++# Target: ++# + pack_src: Pack source files like package_source. ++# + clean_pack_src: Remove all source archives. ++# + clean_old_pack_src: Remove all old source package. ++# ++# ++IF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_) ++ SET (_MANAGE_ARCHIVE_CMAKE_ "DEFINED") ++ SET(SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT ++ "/\\\\.svn/" "/CVS/" "/\\\\.git/" "\\\\.gitignore$" "/\\\\.hg/" ++ "/\\\\.hgignore$" ++ "~$" "\\\\.swp$" "\\\\.log$" "\\\\.bak$" "\\\\.old$" ++ "\\\\.gmo$" "\\\\.cache$" ++ "\\\\.tar.gz$" "\\\\.tar.bz2$" "/src/config\\\\.h$" "NO_PACK") ++ ++ SET(SOURCE_ARCHIVE_IGNORE_FILES_CMAKE "/CMakeFiles/" "_CPack_Packages/" "/Testing/" ++ "\\\\.directory$" "CMakeCache\\\\.txt$" ++ "/install_manifest.txt$" ++ "/cmake_install\\\\.cmake$" "/cmake_uninstall\\\\.cmake$""/CPack.*\\\\.cmake$" "/CTestTestfile\\\\.cmake$" ++ "Makefile$" "/${PROJECT_NAME}-${PRJ_VER}-SOURCE/" ++ ) ++ ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT} ${SOURCE_ARCHIVE_IGNORE_FILES_CMAKE}) ++ ++ INCLUDE(ManageVersion) ++ ++ # Internal: SOURCE_ARCHIVE_GET_CONTENTS() ++ # - Return all source file to be packed. ++ # This is called by SOURCE_ARCHIVE(), ++ # So no need to call it again. ++ FUNCTION(SOURCE_ARCHIVE_GET_CONTENTS ) ++ SET(_fileList "") ++ FILE(GLOB_RECURSE _ls "*") ++ STRING(REPLACE "\\\\" "\\" _ignore_files "${SOURCE_ARCHIVE_IGNORE_FILES}") ++ FOREACH(_file ${_ls}) ++ SET(_matched 0) ++ FOREACH(filePattern ${_ignore_files}) ++ M_MSG(${M_INFO3} "_file=${_file} filePattern=${filePattern}") ++ IF(_file MATCHES "${filePattern}") ++ SET(_matched 1) ++ BREAK() ++ ENDIF(_file MATCHES "${filePattern}") ++ ENDFOREACH(filePattern ${_ignore_files}) ++ IF(NOT _matched) ++ FILE(RELATIVE_PATH _file ${CMAKE_SOURCE_DIR} "${_file}") ++ LIST(APPEND _fileList "${_file}") ++ ENDIF(NOT _matched) ++ ENDFOREACH(_file ${_ls}) ++ SET(SOURCE_ARCHIVE_CONTENTS ${_fileList} CACHE STRING "Source archive file list" FORCE) ++ M_MSG(${M_INFO2} "SOURCE_ARCHIVE_CONTENTS=${SOURCE_ARCHIVE_CONTENTS}") ++ ENDFUNCTION(SOURCE_ARCHIVE_GET_CONTENTS var) ++ ++ MACRO(PACK_SOURCE_ARCHIVE outputDir) ++ IF(PRJ_VER STREQUAL "") ++ M_MSG(${M_FATAL} "PRJ_VER not defined") ++ ENDIF(PRJ_VER STREQUAL "") ++ IF(${ARGV2}) ++ SET(CPACK_GENERATOR "${ARGV2}") ++ ELSE(${ARGV2}) ++ SET(CPACK_GENERATOR "TGZ") ++ ENDIF(${ARGV2}) ++ SET(CPACK_SOURCE_GENERATOR ${CPACK_GENERATOR}) ++ IF(${CPACK_GENERATOR} STREQUAL "TGZ") ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.gz") ++ ELSEIF(${CPACK_GENERATOR} STREQUAL "TBZ2") ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.bz2") ++ ELSEIF(${CPACK_GENERATOR} STREQUAL "ZIP") ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "zip") ++ ENDIF(${CPACK_GENERATOR} STREQUAL "TGZ") ++ ++ SET(CPACK_SOURCE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES}) ++ SET(CPACK_PACKAGE_VERSION ${PRJ_VER}) ++ ++ IF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING) ++ SET(CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/README) ++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING) ++ ++ IF(EXISTS ${CMAKE_SOURCE_DIR}/README) ++ SET(CPACK_PACKAGE_DESCRIPTION_FILE ${CMAKE_SOURCE_DIR}/README) ++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/README) ++ ++ IF(DEFINED PRJ_SUMMARY) ++ SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "${PRJ_SUMMARY}") ++ ENDIF(DEFINED PRJ_SUMMARY) ++ ++ SET(CPACK_SOURCE_PACKAGE_FILE_NAME "${PROJECT_NAME}-${PRJ_VER}-Source") ++ SET(SOURCE_ARCHIVE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}.${SOURCE_ARCHIVE_FILE_EXTENSION}" CACHE STRING "Source archive name" FORCE) ++ SET(SOURCE_ARCHIVE_FILE "${outputDir}/${SOURCE_ARCHIVE_NAME}" CACHE FILEPATH "Source archive file" FORCE) ++ ++ SET(CPACK_PACKAGE_VENDOR "${VENDOR}") ++ SOURCE_ARCHIVE_GET_CONTENTS() ++ ++ SET(SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "") ++ FOREACH(_file ${SOURCE_ARCHIVE_CONTENTS}) ++ LIST(APPEND SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "${CMAKE_HOME_DIRECTORY}/${_file}") ++ ENDFOREACH(_file ${SOURCE_ARCHIVE_CONTENTS}) ++ ++ INCLUDE(CPack) ++ ++ # Get relative path of outputDir ++ FILE(RELATIVE_PATH _outputDir_rel ${CMAKE_BINARY_DIR} ${outputDir}) ++ #MESSAGE("#_outputDir_rel=${_outputDir_rel}") ++ ++ IF("${_outputDir_rel}" STREQUAL ".") ++ ADD_CUSTOM_TARGET_COMMAND(pack_src ++ OUTPUT "${SOURCE_ARCHIVE_FILE}" ++ COMMAND make package_source ++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS} ++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}" ++ ) ++ ELSE("${_outputDir_rel}" STREQUAL ".") ++ FILE(MAKE_DIRECTORY ${outputDir}) ++ ADD_CUSTOM_TARGET_COMMAND(pack_src ++ OUTPUT "${SOURCE_ARCHIVE_FILE}" ++ COMMAND make package_source ++ COMMAND cmake -E copy "${SOURCE_ARCHIVE_NAME}" "${outputDir}" ++ COMMAND cmake -E remove ${SOURCE_ARCHIVE_NAME} ++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS_ABSOLUTE} ++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}" ++ ) ++ ENDIF("${_outputDir_rel}" STREQUAL ".") ++ ++ ADD_CUSTOM_TARGET(clean_old_pack_src ++ COMMAND find . ++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}' ! -name '${PROJECT_NAME}-${PRJ_VER}-*.${SOURCE_ARCHIVE_FILE_EXTENSION}' ++ -print -delete ++ COMMENT "Cleaning old source archives" ++ ) ++ ++ ADD_DEPENDENCIES(clean_old_pack_src changelog ) ++ ++ ADD_CUSTOM_TARGET(clean_pack_src ++ COMMAND find . ++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}' ++ -print -delete ++ COMMENT "Cleaning all source archives" ++ ) ++ ENDMACRO(PACK_SOURCE_ARCHIVE outputDir) ++ ++ENDIF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageEnvironment.cmake +@@ -0,0 +1,190 @@ ++# - Manage build environment such as environment variables and compile flags. ++# This module predefine various environment variables, cmake policies, and ++# compile flags. ++# ++# The setting can be viewed and modified by ccmake. ++# ++# List of frequently used variable and compile flags: ++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}. ++# + BIN_DIR: Directory for executable. ++# Default: ${CMAKE_INSTALL_PREFIX}/bin ++# + DATA_DIR: Directory for architecture independent data files. ++# Default: ${CMAKE_INSTALL_PREFIX}/share ++# + DOC_DIR: Directory for documentation ++# Default: ${DATA_DIR}/doc ++# + SYSCONF_DIR: System wide configuration files. ++# Default: /etc ++# + LIB_DIR: System wide library path. ++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit, ++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit. ++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly. ++# Default: ${CMAKE_INSTALL_PREFIX}/libexec ++# + PROJECT_NAME: Project name ++# ++# Defines following macros: ++# SET_COMPILE_ENV(var default_value [ENV_NAME env_name] ++# [CACHE type docstring [FORCE]]) ++# - Ensure a variable is set to nonempty value, then add the variable and value to ++# compiling definition. ++# The value is determined by following order: ++# 1. Value of var if var is defined. ++# 2. Environment variable with the same name (or specified via ENV_NAME) ++# 3. Parameter default_value ++# Parameters: ++# + var: Variable to be set ++# + default_value: Default value of the var ++# + env_name: (Optional)The name of environment variable. ++# Only need if different from var. ++# + CACHE type docstring [FORCE]: ++# Same with "SET" command. ++# ++# SET_USUAL_COMPILE_ENVS() ++# - Set the most often used variable and compile flags. ++# It defines compile flags according to the values of corresponding variables, ++# usually under the same or similar name. ++# If a corresponding variable is not defined yet, then a default value is assigned ++# to that variable, then define the flag. ++# ++# Defines following flags according to the variable with same name. ++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}. ++# + BIN_DIR: Directory for executable. ++# Default: ${CMAKE_INSTALL_PREFIX}/bin ++# + DATA_DIR: Directory for architecture independent data files. ++# Default: ${CMAKE_INSTALL_PREFIX}/share ++# + DOC_DIR: Directory for documentation ++# Default: ${DATA_DIR}/doc ++# + SYSCONF_DIR: System wide configuration files. ++# Default: /etc ++# + LIB_DIR: System wide library path. ++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit, ++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit. ++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly. ++# Default: ${CMAKE_INSTALL_PREFIX}/libexec ++# + PROJECT_NAME: Project name ++# + PRJ_VER: Project version ++# + PRJ_DATA_DIR: Data directory for the project. ++# Default: ${DATA_DIR}/${PROJECT_NAME} ++# + PRJ_DOC_DIR: DocuFILEPATH = File chooser dialog. ++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER} ++ ++IF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_) ++ SET(_MANAGE_ENVIRONMENT_CMAKE_ "DEFINED") ++ SET(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON) ++ CMAKE_POLICY(VERSION 2.6.2) ++ ++ MACRO(SET_COMPILE_ENV var default_value) ++ SET(_stage "") ++ SET(_env "${var}") ++ SET(_setOpts "") ++ SET(_force 0) ++ FOREACH(_arg ${ARGN}) ++ IF(_arg STREQUAL "ENV_NAME") ++ SET(_stage "ENV_NAME") ++ ELSEIF(_arg STREQUAL "CACHE") ++ SET(_stage "_CACHE") ++ ELSE(_arg STREQUAL "ENV_NAME") ++ IF(_stage STREQUAL "ENV_NAME") ++ SET(_env "${_arg}") ++ ELSEIF(_stage STREQUAL "_CACHE") ++ LIST(APPEND _setOpts "${_arg}") ++ IF(_arg STREQUAL "FORCE") ++ SET(_force 1) ++ ENDIF(_arg STREQUAL "FORCE") ++ ENDIF(_stage STREQUAL "ENV_NAME") ++ ENDIF(_arg STREQUAL "ENV_NAME") ++ ENDFOREACH(_arg ${ARGN}) ++ ++ IF(NOT "${_setOpts}" STREQUAL "") ++ LIST(INSERT _setOpts 0 "CACHE") ++ ENDIF(NOT "${_setOpts}" STREQUAL "") ++ ++ # Set the variable ++ IF(_force) ++ IF(NOT "$ENV{${_env}}" STREQUAL "") ++ SET(${var} "$ENV{${_env}}" ${_setOpts}) ++ ELSE(NOT "$ENV{${_env}}" STREQUAL "") ++ SET(${var} "${default_value}" ${_setOpts}) ++ ENDIF(NOT "$ENV{${_env}}" STREQUAL "") ++ ELSE(_force) ++ IF(NOT "${${var}}" STREQUAL "") ++ SET(${var} "${${var}}" ${_setOpts}) ++ ELSEIF(NOT "$ENV{${_env}}" STREQUAL "") ++ SET(${var} "$ENV{${_env}}" ${_setOpts}) ++ ELSE(NOT "${${var}}" STREQUAL "") ++ # Default value ++ SET(${var} "${default_value}" ${_setOpts}) ++ ENDIF(NOT "${${var}}" STREQUAL "") ++ ENDIF(_force) ++ ++ # Enforce CMP0005 to new, yet pop after ADD_DEFINITION ++ CMAKE_POLICY(PUSH) ++ CMAKE_POLICY(SET CMP0005 NEW) ++ ADD_DEFINITIONS(-D${_env}=${${var}}) ++ CMAKE_POLICY(POP) ++ M_MSG(${M_INFO2} "SET(${var} ${${var}})") ++ ENDMACRO(SET_COMPILE_ENV var default_value) ++ ++ MACRO(MANAGE_CMAKE_POLICY policyName defaultValue) ++ IF(POLICY ${policyName}) ++ CMAKE_POLICY(GET "${policyName}" _cmake_policy_value) ++ IF(_cmake_policy_value STREQUAL "") ++ # Policy not defined yet ++ CMAKE_POLICY(SET "${policyName}" "${defaultValue}") ++ ENDIF(_cmake_policy_value STREQUAL "") ++ ENDIF(POLICY ${policyName}) ++ ENDMACRO(MANAGE_CMAKE_POLICY policyName defaultValue) ++ ++ #################################################################### ++ # Recommended policy setting ++ # ++ # CMP0005: Preprocessor definition values are now escaped automatically. ++ # OLD:Preprocessor definition values are not escaped. ++ MANAGE_CMAKE_POLICY(CMP0005 NEW) ++ ++ # CMP0009: FILE GLOB_RECURSE calls should not follow symlinks by default. ++ # OLD: FILE GLOB_RECURSE calls follow symlinks ++ MANAGE_CMAKE_POLICY(CMP0009 NEW) ++ ++ # CMP0017: Prefer files from the CMake module directory when including from there. ++ # OLD: Prefer files from CMAKE_MODULE_PATH regardless ++ MANAGE_CMAKE_POLICY(CMP0017 NEW) ++ ++ # Include should be put after the cmake policy ++ INCLUDE(ManageMessage) ++ M_MSG(${M_INFO1} "CMAKE_HOST_SYSTEM=${CMAKE_HOST_SYSTEM}") ++ M_MSG(${M_INFO1} "CMAKE_SYSTEM=${CMAKE_SYSTEM}") ++ ++ #################################################################### ++ # CMake Variables ++ # ++ SET_COMPILE_ENV(BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" ++ CACHE PATH "Binary dir") ++ SET_COMPILE_ENV(DATA_DIR "${CMAKE_INSTALL_PREFIX}/share" ++ CACHE PATH "Data dir") ++ SET_COMPILE_ENV(DOC_DIR "${DATA_DIR}/doc" ++ CACHE PATH "Documentation dir") ++ SET_COMPILE_ENV(SYSCONF_DIR "/etc" ++ CACHE PATH "System configuration dir") ++ SET_COMPILE_ENV(LIBEXEC_DIR "${CMAKE_INSTALL_PREFIX}/libexec" ++ CACHE PATH "LIBEXEC dir") ++ ++ IF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") ++ SET_COMPILE_ENV(IS_64 "64" CACHE STRING "IS_64") ++ ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") ++ ++ SET_COMPILE_ENV(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib${IS_64}" ++ CACHE PATH "Library dir") ++ ++ SET_COMPILE_ENV(PROJECT_NAME "${PROJECT_NAME}") ++ SET_COMPILE_ENV(PRJ_DATA_DIR "${DATA_DIR}/${PROJECT_NAME}") ++ ++ # Directory to store cmake-fedora specific temporary files. ++ IF(NOT CMAKE_FEDORA_TMP_DIR) ++ SET(CMAKE_FEDORA_TMP_DIR "${CMAKE_BINARY_DIR}/NO_PACK") ++ ENDIF(NOT CMAKE_FEDORA_TMP_DIR) ++ ++ ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_FEDORA_TMP_DIR} ++ COMMAND cmake -E make_directory ${CMAKE_FEDORA_TMP_DIR} ++ COMMENT "Create CMAKE_FEDORA_TMP_DIR" ++ ) ++ENDIF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_) +--- /dev/null ++++ b/Modules/ManageGConf.cmake +@@ -0,0 +1,67 @@ ++# - GConf relative targets such as install/unstall schemas. ++# This module finds gconftool-2 or gconftool for GConf manipulation. ++# ++# Reads following variables: ++# GCONF_SCHEMAS_FILE: Schema file. ++# Default: "${PROJECT_NAME}.schemas" ++# ++# GCONF_SCHEMAS_INSTALLED_DIR: Direct of installed schemas files. ++# Default: "${SYSCONF_INSTALL_DIR}/gconf/schemas" ++# ++# GCONF_CONFIG_SOURCE: configuration source. ++# Default: "" (Use the system default) ++# ++# Defines following targets: ++# install_schemas: install schemas ++# ++# uninstall_schemas: uninstall schemas ++# ++ ++IF(NOT DEFINED _MANAGE_GCONF_CMAKE_) ++ FIND_PROGRAM(GCONFTOOL_CMD NAMES gconftool-2 gconftool) ++ ++ IF(${GCONFTOOL_CMD} STREQUAL "GCONFTOOL_CMD-NOTFOUND") ++ MESSAGE(FATAL_ERROR "gconftool and gconftool-2 are not found, please install GConf or GConf2.") ++ ENDIF() ++ ++ IF (NOT DEFINED GCONF_SCHEMAS_FILE) ++ SET(GCONF_SCHEMAS_FILE "${PROJECT_NAME}.schemas") ++ ENDIF(NOT DEFINED GCONF_SCHEMAS_FILE) ++ ++ GET_FILENAME_COMPONENT(_gconf_schemas_basename ${GCONF_SCHEMAS_FILE} NAME) ++ ++ IF (NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR) ++ IF(SYSCONF_INSTALL_DIR) ++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_INSTALL_DIR}/gconf/schemas") ++ ELSE(SYSCONF_INSTALL_DIR) ++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_DIR}/gconf/schemas") ++ ENDIF(SYSCONF_INSTALL_DIR) ++ ENDIF(NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR) ++ ++ IF (NOT DEFINED GCONF_CONFIG_SOURCE) ++ SET(GCONF_CONFIG_SOURCE "") ++ ENDIF(NOT DEFINED GCONF_CONFIG_SOURCE) ++ SET(ENV{GCONF_CONFIG_SOURCE} ${GCONF_CONFIG_SOURCE}) ++ ++ ++ ADD_CUSTOM_TARGET(uninstall_schemas ++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE} ++ ${GCONFTOOL_CMD} --makefile-uninstall-rule ++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} ++ COMMENT "Uninstalling schemas" ++ ) ++ ++ ADD_CUSTOM_TARGET(install_schemas ++ COMMAND cmake -E copy ${GCONF_SCHEMAS_FILE} ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} ++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE} ++ ${GCONFTOOL_CMD} --makefile-install-rule ++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} ++ DEPENDS ${GCONF_SCHEMAS_FILE} ++ COMMENT "Installing schemas" ++ ) ++ ++ INSTALL(FILES ${GCONF_SCHEMAS_FILE} ++ DESTINATION "${GCONF_SCHEMAS_INSTALLED_DIR}") ++ENDIF(NOT DEFINED _MANAGE_GCONF_CMAKE_) ++ ++ +--- /dev/null ++++ b/Modules/ManageInstall.cmake +@@ -0,0 +1,25 @@ ++# - Manage installation ++# Convenient collection of macros and functions to manage installation. ++# ++# Defines following macros: ++# MANAGE_INSTALL(var file1 [file2 ....]) ++# - Managed install. Files are installed to the path specified by var. ++# This macro also sets 'MANAGE_INSTALL_$var' as files that associate to this var ++# The files that are associated to this var is ++# Read and define: ++# + MANAGE_INSTALL_$var : Files to be installed under var. ++# Arguments: ++# + var: A variable that contains install destination path ++# + file1 ... : File to be installed to $var ++# ++ ++IF(NOT DEFINED _MANAGE_INSTALL_CMAKE_) ++ SET (_MANAGE_INSTALL_CMAKE_ "DEFINED") ++ SET(MANAGE_INSTALL_FILES "") ++ ++ MACRO(MANAGE_INSTALL var file1) ++ LIST(APPEND MANAGE_INSTALL_${var} ${file1} ${ARGN}) ++ INSTALL(FILES $file1 ${ARGN} ++ DESTINATION "${var}") ++ ENDMACRO(MANAGE_INSTALL var file1) ++ENDIF(NOT DEFINED _MANAGE_INSTALL_CMAKE_) +--- /dev/null ++++ b/Modules/ManageMessage.cmake +@@ -0,0 +1,60 @@ ++# - Manage the output and debug messages. ++# This module has macros that control how many messages to be shown ++# by defining the desire message level. ++# ++# Defined variables that represent verbose levels: ++# 1: M_FATAL - Critical error,Should stop immediately ++# 2: M_ERROR - Error that will Eventually fail ++# 3: M_WARN - General Warning. ++# 4: M_OFF - Optional functionalities are turned-off because requirement is not met. ++# 5: M_INFO1 - Info/debug message ++# 6: M_INFO2 - Info/debug message ++# 7: M_INFO3 - Info/debug message ++# ++# Read following variable: ++# + MANAGE_MESSAGE_LEVEL: Message level in integer. ++# Messages with greater level will be suppressed. ++# Default is ${M_OFF} ++# + MANAGE_MESSAGE_LABELS: Labels that printed in front of the message for ++# corresponding message level. ++# Default is "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ") ++# ++# Define following macros: ++# M_MSG(level msg) ++# - Surpress the message if level is higher than MANAGE_MESSAGE_LEVEL ++# Otherwise show the message. ++# Arguments: ++# + level: level of the message. ++# + msg: Message to show. ++# ++ ++ ++IF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_) ++ SET(_MANAGE_MESSAGE_CMAKE_ "DEFINED") ++ SET(M_FATAL 1) ++ SET(M_ERROR 2) ++ SET(M_WARN 3) ++ SET(M_OFF 4) ++ SET(M_INFO1 5) ++ SET(M_INFO2 6) ++ SET(M_INFO3 7) ++ IF(NOT DEFINED MANAGE_MESSAGE_LABELS) ++ SET(MANAGE_MESSAGE_LABELS ++ "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ") ++ ENDIF(NOT DEFINED MANAGE_MESSAGE_LABELS) ++ ++ SET(MANAGE_MESSAGE_LEVEL ${M_OFF} CACHE STRING "Message (Verbose) Level") ++ ++ MACRO(M_MSG level msg) ++ IF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL}) ++ MATH(EXPR _lvl ${level}-1) ++ LIST(GET MANAGE_MESSAGE_LABELS ${_lvl} _label) ++ IF(${level} EQUAL 1) ++ MESSAGE(FATAL_ERROR "${_label}${msg}") ++ ELSE(${level} EQUAL 1) ++ MESSAGE("${_label}${msg}") ++ ENDIF(${level} EQUAL 1) ++ ENDIF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL}) ++ ENDMACRO(M_MSG level msg) ++ENDIF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageRPM.cmake +@@ -0,0 +1,327 @@ ++# - RPM generation, maintaining (remove old rpm) and verification (rpmlint). ++# This module provides macros that provides various rpm building and ++# verification targets. ++# ++# This module needs variable from ManageArchive, so INCLUDE(ManageArchive) ++# before this module. ++# ++# Includes: ++# ManageMessage ++# ManageTarget ++# ++# Reads and defines following variables if dependencies are satisfied: ++# PRJ_RPM_SPEC_IN_FILE: spec.in that generate spec ++# PRJ_RPM_SPEC_FILE: spec file for rpmbuild. ++# RPM_DIST_TAG: (optional) Current distribution tag such as el5, fc10. ++# Default: Distribution tag from rpm --showrc ++# ++# RPM_BUILD_TOPDIR: (optional) Directory of the rpm topdir. ++# Default: ${CMAKE_BINARY_DIR} ++# ++# RPM_BUILD_SPECS: (optional) Directory of generated spec files ++# and RPM-ChangeLog. ++# Note this variable is not for locating ++# SPEC template (project.spec.in), RPM-ChangeLog source files. ++# These are located through the path of spec_in. ++# Default: ${RPM_BUILD_TOPDIR}/SPECS ++# ++# RPM_BUILD_SOURCES: (optional) Directory of source (tar.gz or zip) files. ++# Default: ${RPM_BUILD_TOPDIR}/SOURCES ++# ++# RPM_BUILD_SRPMS: (optional) Directory of source rpm files. ++# Default: ${RPM_BUILD_TOPDIR}/SRPMS ++# ++# RPM_BUILD_RPMS: (optional) Directory of generated rpm files. ++# Default: ${RPM_BUILD_TOPDIR}/RPMS ++# ++# RPM_BUILD_BUILD: (optional) Directory for RPM build. ++# Default: ${RPM_BUILD_TOPDIR}/BUILD ++# ++# RPM_BUILD_BUILDROOT: (optional) Directory for RPM build. ++# Default: ${RPM_BUILD_TOPDIR}/BUILDROOT ++# ++# Defines following variables: ++# RPM_IGNORE_FILES: A list of exclude file patterns for PackSource. ++# This value is appended to SOURCE_ARCHIVE_IGNORE_FILES after including ++# this module. ++# ++# Defines following Macros: ++# PACK_RPM() ++# - Generate spec and pack rpm according to the spec file. ++# Arguments: ++# Targets: ++# + srpm: Build srpm (rpmbuild -bs). ++# + rpm: Build rpm and srpm (rpmbuild -bb) ++# + rpmlint: Run rpmlint to generated rpms. ++# + clean_rpm": Clean all rpm and build files. ++# + clean_pkg": Clean all source packages, rpm and build files. ++# + clean_old_rpm: Remove old rpm and build files. ++# + clean_old_pkg: Remove old source packages and rpms. ++# This macro defines following variables: ++# + PRJ_RELEASE: Project release with distribution tags. (e.g. 1.fc13) ++# + PRJ_RELEASE_NO: Project release number, without distribution tags. (e.g. 1) ++# + PRJ_SRPM_FILE: Path to generated SRPM file, including relative path. ++# + PRJ_RPM_BUILD_ARCH: Architecture to be build. ++# + PRJ_RPM_FILES: Binary RPM files to be build. ++# ++# RPM_MOCK_BUILD() ++# - Add mock related targets. ++# Targets: ++# + rpm_mock_i386: Make i386 rpm ++# + rpm_mock_x86_64: Make x86_64 rpm ++# This macor reads following variables?: ++# + MOCK_RPM_DIST_TAG: Prefix of mock configure file, such as "fedora-11", "fedora-rawhide", "epel-5". ++# Default: Convert from RPM_DIST_TAG ++# ++ ++IF(NOT DEFINED _MANAGE_RPM_CMAKE_) ++ SET (_MANAGE_RPM_CMAKE_ "DEFINED") ++ ++ INCLUDE(ManageMessage) ++ INCLUDE(ManageTarget) ++ SET(_manage_rpm_dependency_missing 0) ++ ++ FIND_PROGRAM(RPMBUILD_CMD NAMES "rpmbuild-md5") ++ IF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "rpmbuild is not found in PATH, rpm build support is disabled.") ++ SET(_manage_rpm_dependency_missing 1) ++ ENDIF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND") ++ ++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES "${PROJECT_NAME}.spec.in" "project.spec.in") ++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH "${CMAKE_SOURCE_DIR}/SPECS" "SPECS" "." "${RPM_BUILD_TOPDIR}/SPECS") ++ FIND_FILE(PRJ_RPM_SPEC_IN_FILE NAMES ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES} PATHS ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH}) ++ IF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND") ++ M_MSG(${M_OFF} "Cannot find ${PROJECT}.spec.in or project .in" ++ "${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH}") ++ M_MSG(${M_OFF} "rpm build support is disabled.") ++ SET(_manage_rpm_dependency_missing 1) ++ ENDIF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND") ++ ++ IF(NOT _manage_rpm_dependency_missing) ++ INCLUDE(ManageVariable) ++ SET (SPEC_FILE_WARNING "This file is generated, please modified the .spec.in file instead!") ++ ++ EXECUTE_PROCESS(COMMAND rpm --showrc ++ COMMAND grep -E "dist[[:space:]]*\\." ++ COMMAND sed -e "s/^.*dist\\s*\\.//" ++ COMMAND tr \\n \\t ++ COMMAND sed -e s/\\t// ++ OUTPUT_VARIABLE _RPM_DIST_TAG) ++ ++ SET(RPM_DIST_TAG "${_RPM_DIST_TAG}" CACHE STRING "RPM Dist Tag") ++ SET(RPM_BUILD_TOPDIR "${CMAKE_BINARY_DIR}" CACHE PATH "RPM topdir") ++ SET(RPM_BUILD_SPECS "${RPM_BUILD_TOPDIR}/SPECS" CACHE PATH "RPM SPECS dir") ++ SET(RPM_BUILD_SOURCES "${RPM_BUILD_TOPDIR}/SOURCES" CACHE PATH "RPM SOURCES dir") ++ SET(RPM_BUILD_SRPMS "${RPM_BUILD_TOPDIR}/SRPMS" CACHE PATH "RPM SRPMS dir") ++ SET(RPM_BUILD_RPMS "${RPM_BUILD_TOPDIR}/RPMS" CACHE PATH "RPM RPMS dir") ++ SET(RPM_BUILD_BUILD "${RPM_BUILD_TOPDIR}/BUILD" CACHE PATH "RPM BUILD dir") ++ SET(RPM_BUILD_BUILDROOT "${RPM_BUILD_TOPDIR}/BUILDROOT" CACHE PATH "RPM BUILDROOT dir") ++ ++ ## RPM spec.in and RPM-ChangeLog.prev ++ SET(PRJ_RPM_SPEC_FILE "${RPM_BUILD_SPECS}/${PROJECT_NAME}.spec" CACHE FILEPATH "spec") ++ SET(PRJ_RPM_SPEC_IN_FILE "${_PRJ_RPM_SPEC_IN_FILE}" CACHE FILEPATH "spec.in") ++ GET_FILENAME_COMPONENT(_PRJ_RPM_SPEC_IN_DIR "${PRJ_RPM_SPEC_IN_FILE}" PATH) ++ SET(PRJ_RPM_SPEC_IN_DIR "${_PRJ_RPM_SPEC_IN_DIR}" CACHE INTERNAL "Dir contains spec.in") ++ SET(RPM_CHANGELOG_PREV_FILE "${PRJ_RPM_SPEC_IN_DIR}/RPM-ChangeLog.prev" CACHE FILEPATH "ChangeLog.prev for RPM") ++ SET(RPM_CHANGELOG_FILE "${RPM_BUILD_SPECS}/RPM-ChangeLog" CACHE FILEPATH "ChangeLog for RPM") ++ ++ # Add RPM build directories in ignore file list. ++ GET_FILENAME_COMPONENT(_rpm_build_sources_basename ${RPM_BUILD_SOURCES} NAME) ++ GET_FILENAME_COMPONENT(_rpm_build_srpms_basename ${RPM_BUILD_SRPMS} NAME) ++ GET_FILENAME_COMPONENT(_rpm_build_rpms_basename ${RPM_BUILD_RPMS} NAME) ++ GET_FILENAME_COMPONENT(_rpm_build_build_basename ${RPM_BUILD_BUILD} NAME) ++ GET_FILENAME_COMPONENT(_rpm_build_buildroot_basename ${RPM_BUILD_BUILDROOT} NAME) ++ SET(RPM_IGNORE_FILES ++ "/${_rpm_build_sources_basename}/" "/${_rpm_build_srpms_basename}/" "/${_rpm_build_rpms_basename}/" ++ "/${_rpm_build_build_basename}/" "/${_rpm_build_buildroot_basename}/" "debug.*s.list") ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${RPM_IGNORE_FILES}) ++ ++ ENDIF(NOT _manage_rpm_dependency_missing) ++ ++ FUNCTION(PRJ_RPM_SPEC_IN_READ_FILE) ++ SETTING_FILE_GET_VARIABLE(_releaseStr Release "${PRJ_RPM_SPEC_IN_FILE}" ":") ++ STRING(REPLACE "%{?dist}" ".${RPM_DIST_TAG}" _PRJ_RELEASE ${_releaseStr}) ++ STRING(REPLACE "%{?dist}" "" _PRJ_RELEASE_NO ${_releaseStr}) ++ #MESSAGE("_releaseTag=${_releaseTag} _releaseStr=${_releaseStr}") ++ ++ SET(PRJ_RELEASE ${_PRJ_RELEASE} CACHE STRING "Release with dist" FORCE) ++ SET(PRJ_RELEASE_NO ${_PRJ_RELEASE_NO} CACHE STRING "Release w/o dist" FORCE) ++ SET(PRJ_SRPM "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.src.rpm" CACHE STRING "PRJ SRPM" FORCE) ++ SET(PRJ_SRPM_FILE "${RPM_BUILD_SRPMS}/${PRJ_SRPM}" CACHE FILEPATH "PRJ SRPM File" FORCE) ++ ++ ## GET BuildArch ++ SETTING_FILE_GET_VARIABLE(_archStr BuildArch "${PRJ_RPM_SPEC_IN_FILE}" ":") ++ IF(NOT _archStr STREQUAL "noarch") ++ SET(_archStr ${CMAKE_HOST_SYSTEM_PROCESSOR}) ++ ENDIF(NOT _archStr STREQUAL "noarch") ++ SET(PRJ_RPM_BUILD_ARCH "${_archStr}" CACHE STRING "BuildArch") ++ ++ ## Main rpm ++ SET(PRJ_RPM_FILES "${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH}/${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.${PRJ_RPM_BUILD_ARCH}.rpm" ++ CACHE STRING "RPM files" FORCE) ++ ++ ## Obtains sub packages ++ ## [TODO] ++ ENDFUNCTION(PRJ_RPM_SPEC_IN_READ_FILE) ++ ++ MACRO(RPM_CHANGELOG_WRITE_FILE) ++ INCLUDE(DateTimeFormat) ++ ++ FILE(WRITE ${RPM_CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}-${PRJ_RELEASE_NO}\n") ++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" CHANGELOG_ITEMS) ++ ++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${CHANGELOG_ITEMS}\n\n") ++ ++ # Update RPM_ChangeLog ++ # Use this instead of FILE(READ is to avoid error when reading '\' ++ # character. ++ EXECUTE_PROCESS(COMMAND cat "${RPM_CHANGELOG_PREV_FILE}" ++ OUTPUT_VARIABLE RPM_CHANGELOG_PREV ++ OUTPUT_STRIP_TRAILING_WHITESPACE) ++ ++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${RPM_CHANGELOG_PREV}") ++ ++ ADD_CUSTOM_COMMAND(OUTPUT ${RPM_CHANGELOG_FILE} ++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR} ++ DEPENDS ${CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE} ++ COMMENT "Write ${RPM_CHANGELOG_FILE}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(rpm_changelog_prev_update ++ COMMAND ${CMAKE_COMMAND} -E copy ${RPM_CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE} ++ DEPENDS ${RPM_CHANGELOG_FILE} ++ COMMENT "${RPM_CHANGELOG_FILE} are saving as ${RPM_CHANGELOG_PREV_FILE}" ++ ) ++ ++ IF(TARGET after_release_commit_pre) ++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update) ++ ENDIF(TARGET after_release_commit_pre) ++ ENDMACRO(RPM_CHANGELOG_WRITE_FILE) ++ ++ MACRO(PACK_RPM) ++ IF(NOT _manage_rpm_dependency_missing ) ++ PRJ_RPM_SPEC_IN_READ_FILE() ++ RPM_CHANGELOG_WRITE_FILE() ++ ++ # Generate spec ++ CONFIGURE_FILE(${PRJ_RPM_SPEC_IN_FILE} ${PRJ_RPM_SPEC_FILE}) ++ ++ #------------------------------------------------------------------- ++ # RPM build commands and targets ++ ++ FILE(MAKE_DIRECTORY ${RPM_BUILD_BUILD}) ++ ++ # Don't worry about SRPMS, RPMS and BUILDROOT, it will be created by rpmbuild ++ ++ ADD_CUSTOM_TARGET_COMMAND(srpm ++ OUTPUT ${PRJ_SRPM_FILE} ++ COMMAND ${RPMBUILD_CMD} -bs ${PRJ_RPM_SPEC_FILE} ++ --define '_sourcedir ${RPM_BUILD_SOURCES}' ++ --define '_builddir ${RPM_BUILD_BUILD}' ++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}' ++ --define '_rpmdir ${RPM_BUILD_RPMS}' ++ --define '_specdir ${RPM_BUILD_SPECS}' ++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${SOURCE_ARCHIVE_FILE} ++ COMMENT "Building srpm" ++ ) ++ ++ # RPMs (except SRPM) ++ ++ ADD_CUSTOM_TARGET_COMMAND(rpm ++ OUTPUT ${PRJ_RPM_FILES} ++ COMMAND ${RPMBUILD_CMD} -ba ${PRJ_RPM_SPEC_FILE} ++ --define '_sourcedir ${RPM_BUILD_SOURCES}' ++ --define '_builddir ${RPM_BUILD_BUILD}' ++ --define '_buildrootdir ${RPM_BUILD_BUILDROOT}' ++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}' ++ --define '_rpmdir ${RPM_BUILD_RPMS}' ++ --define '_specdir ${RPM_BUILD_SPECS}' ++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${PRJ_SRPM_FILE} ++ COMMENT "Building rpm" ++ ) ++ ++ ++ ADD_CUSTOM_TARGET(install_rpms ++ COMMAND find ${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH} ++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm' ! ++ -name '${PROJECT_NAME}-debuginfo-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm' ++ -print -exec sudo rpm --upgrade --hash --verbose '{}' '\\;' ++ DEPENDS ${PRJ_RPM_FILES} ++ COMMENT "Install all rpms except debuginfo" ++ ) ++ ++ ADD_CUSTOM_TARGET(rpmlint ++ COMMAND find . ++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm' ++ -print -exec rpmlint '{}' '\\;' ++ DEPENDS ${PRJ_SRPM_FILE} ${PRJ_RPM_FILES} ++ ) ++ ++ ADD_CUSTOM_TARGET(clean_old_rpm ++ COMMAND find . ++ -name '${PROJECT_NAME}*.rpm' ! -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm' ++ -print -delete ++ COMMAND find ${RPM_BUILD_BUILD} ++ -path '${PROJECT_NAME}*' ! -path '${RPM_BUILD_BUILD}/${PROJECT_NAME}-${PRJ_VER}-*' ++ -print -delete ++ COMMENT "Cleaning old rpms and build." ++ ) ++ ++ ADD_CUSTOM_TARGET(clean_old_pkg ++ ) ++ ++ ADD_DEPENDENCIES(clean_old_pkg clean_old_rpm clean_old_pack_src) ++ ++ ADD_CUSTOM_TARGET(clean_rpm ++ COMMAND find . -name '${PROJECT_NAME}-*.rpm' -print -delete ++ COMMENT "Cleaning rpms.." ++ ) ++ ADD_CUSTOM_TARGET(clean_pkg ++ ) ++ ++ ADD_DEPENDENCIES(clean_rpm clean_old_rpm) ++ ADD_DEPENDENCIES(clean_pkg clean_rpm clean_pack_src) ++ ENDIF(NOT _manage_rpm_dependency_missing ) ++ ENDMACRO(PACK_RPM) ++ ++ MACRO(RPM_MOCK_BUILD) ++ IF(NOT _manage_rpm_dependency_missing ) ++ FIND_PROGRAM(MOCK_CMD mock) ++ IF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "mock is not found in PATH, mock support disabled.") ++ ELSE(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") ++ IF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch") ++ IF(NOT DEFINED MOCK_RPM_DIST_TAG) ++ STRING(REGEX MATCH "^fc([1-9][0-9]*)" _fedora_mock_dist "${RPM_DIST_TAG}") ++ STRING(REGEX MATCH "^el([1-9][0-9]*)" _el_mock_dist "${RPM_DIST_TAG}") ++ ++ IF (_fedora_mock_dist) ++ STRING(REGEX REPLACE "^fc([1-9][0-9]*)" "fedora-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}") ++ ELSEIF (_el_mock_dist) ++ STRING(REGEX REPLACE "^el([1-9][0-9]*)" "epel-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}") ++ ELSE (_fedora_mock_dist) ++ SET(MOCK_RPM_DIST_TAG "fedora-devel") ++ ENDIF(_fedora_mock_dist) ++ ENDIF(NOT DEFINED MOCK_RPM_DIST_TAG) ++ ++ #MESSAGE ("MOCK_RPM_DIST_TAG=${MOCK_RPM_DIST_TAG}") ++ ADD_CUSTOM_TARGET(rpm_mock_i386 ++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/i386 ++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-i386" --resultdir="${RPM_BUILD_RPMS}/i386" ${PRJ_SRPM_FILE} ++ DEPENDS ${PRJ_SRPM_FILE} ++ ) ++ ++ ADD_CUSTOM_TARGET(rpm_mock_x86_64 ++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/x86_64 ++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-x86_64" --resultdir="${RPM_BUILD_RPMS}/x86_64" ${PRJ_SRPM_FILE} ++ DEPENDS ${PRJ_SRPM_FILE} ++ ) ++ ENDIF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch") ++ ENDIF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") ++ ENDIF(NOT _manage_rpm_dependency_missing ) ++ ++ ENDMACRO(RPM_MOCK_BUILD) ++ ++ENDIF(NOT DEFINED _MANAGE_RPM_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageRelease.cmake +@@ -0,0 +1,57 @@ ++# - Module that perform release task. ++# This module provides common targets for release or post-release chores. ++# ++# Defines following macros: ++# MANAGE_RELEASE(releaseTargets) ++# - Run release targets and the target "after_release_commit". ++# This macro skips the missing targets so distro package maintainers ++# do not have to get the irrelevant dependencies. ++# For the "hard" requirement, please use cmake command ++# "ADD_DEPENDENCIES". ++# Arguments: ++# + releaseTargets: Targets need to be done for a release. ++# Note that sequence of the targets does not guarantee the ++# sequence of execution. ++# Defines following targets: ++# + release: Perform everything required for a release. ++# Reads following variables: ++# + RELEASE_DEPENDS_FILES: List of files that the release depends. ++# Note that the sequence of the target does not guarantee the ++# sequence of execution. ++# ++ ++IF(NOT DEFINED _MANAGE_RELEASE_CMAKE_) ++ SET(_MANAGE_RELEASE_CMAKE_ "DEFINED") ++ INCLUDE(ManageMessage) ++ ++ MACRO(MANAGE_RELEASE) ++ ## Target: release ++ ADD_CUSTOM_TARGET(release ++ DEPENDS ${RELEASE_DEPENDS_FILES} ++ COMMENT "Releasing ${PROJECT_NAME}-${PRJ_VER}" ++ ) ++ ++ ## Remove the missing targets ++ SET(_releaseTargets "") ++ FOREACH(_target ${ARGN}) ++ IF(TARGET ${_target}) ++ LIST(APPEND _releaseTargets "${_target}") ++ ELSE(TARGET ${_target}) ++ M_MSG(${M_OFF} "Target ${_target} does not exist, skipped.") ++ ENDIF(TARGET ${_target}) ++ ENDFOREACH(_target ${ARGN}) ++ ++ IF(_releaseTargets) ++ ADD_DEPENDENCIES(release ${_releaseTargets}) ++ ENDIF(_releaseTargets) ++ ++ ## Run after release ++ #ADD_CUSTOM_COMMAND(TARGET release ++ # POST_BUILD ++ # COMMAND make after_release_commit ++ # COMMENT "After released ${PROJECT_NAME}-${PRJ_VER}" ++ # ) ++ ++ ENDMACRO(MANAGE_RELEASE) ++ENDIF(NOT DEFINED _MANAGE_RELEASE_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageReleaseFedora.cmake +@@ -0,0 +1,381 @@ ++# - Module for working with Fedora and EPEL releases. ++# ++# This module provides convenient targets and macros for Fedora and EPEL ++# releases by using fedpkg, koji, and bodhi ++# ++# This module check following files for dependencies: ++# 1. ~/.fedora-upload-ca.cert : Ensure it has certificate file to submit to Fedora. ++# 2. fedpkg : Required to submit to fedora. ++# 3. koji : Required to submit to fedora. ++# 4. bodhi : Required to submit to fedora. ++# ++# If on of above file is missing, this module will be skipped. ++# ++# This module read the supported release information from cmake-fedora.conf ++# It finds cmake-fedora.conf in following order: ++# 1. Current directory ++# 2. Path as defined CMAKE_SOURCE_DIR ++# 3. /etc/cmake-fedora.conf ++# ++# Includes: ++# ManageMessage ++# ++# Defines following variables: ++# CMAKE_FEDORA_CONF: Path to cmake_fedora.conf ++# FEDPKG_CMD: Path to fedpkg ++# KOJI_CMD: Path to koji ++# GIT_CMD: Path to git ++# BODHI_CMD: Path to bodhi ++# KOJI_BUILD_SCRATCH_CMD: Path to koji-build-scratch ++# FEDORA_RAWHIDE_VER: Fedora Rawhide version. ++# FEDORA_SUPPORTED_VERS: Fedora supported versions. ++# EPEL_SUPPORTED_VERS: EPEL supported versions. ++# FEDPKG_DIR: Dir for fedpkg ++# FEDORA_KAMA: Fedora Karma. Default:3 ++# FEDORA_UNSTABLE_KARMA: Fedora unstable Karma. Default:3 ++# FEDORA_AUTO_KARMA: Whether to use fedora Karma system. Default:"True" ++# ++# Defines following functions: ++# RELEASE_FEDORA(tagList) ++# - Release this project to specified Fedora and EPEL releases. ++# Arguments: ++# + tagList: Fedora and EPEL dist tags that this project submit to. ++# E.g. "f18", "f17", "el7" ++# You can also specify "fedora" for fedora current releases, ++# and/or "epel" for EPEL current releases. ++# ++# Reads following variables: ++# + PRJ_SRPM_FILE: Project SRPM ++# + FEDPKG_DIR: Directory for fedpkg checkout. ++# Default: FedPkg. ++# Reads and define following variables: ++# + FEDORA_RAWHIDE_VER: Numeric version of rawhide, such as 18 ++# + FEDORA_SUPPORTED_VERS: Numeric versions of currently supported Fedora, ++# such as 17;16 ++# + EPEL_SUPPORTED_VERS: Numeric versions of currently supported EPEL ++# since version 5. Such as 6;5 ++# + FEDORA_KARMA: Karma for auto pushing. ++# Default: 3 ++# + FEDORA_UNSTABLE_KARMA: Karma for auto unpushing. ++# Default: 3 ++# + FEDORA_AUTO_KARMA: Whether to enable auto pushing/unpushing ++# Default: True ++# Defines following targets: ++# + release_fedora: Make necessary steps for releasing on fedora, ++# such as making source file tarballs, source rpms, build with fedpkg ++# and upload to bodhi. ++# + bodhi_new: Submit the package to bodhi ++# + fedpkg_<tag>_build: Build for tag ++# + fedpkg_<tag>_commit: Import, commit and push ++# + koji_build_scratch: Scratch build using koji ++# ++# ++ ++IF(NOT DEFINED _MANAGE_RELEASE_FEDORA_) ++ SET(_MANAGE_RELEASE_FEDORA_ "DEFINED") ++ INCLUDE(ManageMessage) ++ INCLUDE(ManageTarget) ++ SET(_manage_release_fedora_dependencies_missing 0) ++ SET(KOJI_BUILD_SCRATCH "koji-build-scratch" CACHE INTERNAL "Koji build scratch name") ++ ++ FIND_FILE(CMAKE_FEDORA_CONF cmake-fedora.conf "." "${CMAKE_SOURCE_DIR}" "${SYSCONF_DIR}") ++ M_MSG(${M_INFO1} "CMAKE_FEDORA_CONF=${CMAKE_FEDORA_CONF}") ++ IF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND") ++ M_MSG(${M_OFF} "cmake-fedora.conf cannot be found! Fedora release support disabled.") ++ SET(_manage_release_fedora_dependencies_missing 1) ++ ENDIF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND") ++ ++ FIND_PROGRAM(FEDPKG_CMD fedpkg) ++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program fedpkg is not found! Fedora support disabled.") ++ SET(_manage_release_fedora_dependencies_missing 1) ++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") ++ ++ FIND_PROGRAM(KOJI_CMD koji) ++ IF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program koji is not found! Koji support disabled.") ++ ENDIF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND") ++ ++ FIND_PROGRAM(GIT_CMD git) ++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program git is not found! Fedora support disabled.") ++ SET(_manage_release_fedora_dependencies_missing 1) ++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") ++ ++ FIND_PROGRAM(BODHI_CMD bodhi) ++ IF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program bodhi is not found! Bodhi support disabled.") ++ ENDIF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND") ++ ++ ++ ## Set variables ++ IF(NOT _manage_release_fedora_dependencies_missing) ++ # Set release tags according to CMAKE_FEDORA_CONF ++ SETTING_FILE_GET_ALL_VARIABLES(${CMAKE_FEDORA_CONF}) ++ ++ SET(FEDORA_RAWHIDE_VER "${FEDORA_RAWHIDE_VERSION}" ++ CACHE STRING "Fedora Rawhide ver" FORCE) ++ STRING_SPLIT(_FEDORA_SUPPORTED_VERS " " ${FEDORA_SUPPORTED_VERSIONS}) ++ SET(FEDORA_SUPPORTED_VERS ${_FEDORA_SUPPORTED_VERS} ++ CACHE STRING "Fedora supported vers" FORCE) ++ ++ STRING_SPLIT(_EPEL_SUPPORTED_VERS " " ${EPEL_SUPPORTED_VERSIONS}) ++ SET(EPEL_SUPPORTED_VERS ${_EPEL_SUPPORTED_VERS} ++ CACHE STRING "EPEL supported vers" FORCE) ++ ++ SET(FEDORA_KOJI_TAG_POSTFIX "" CACHE STRING "Koji Fedora tag prefix") ++ SET(EPEL_KOJI_TAG_POSTFIX "-testing-candidate" ++ CACHE STRING "Koji EPEL tag prefix") ++ ++ SET(BODHI_TEMPLATE_FILE "${CMAKE_FEDORA_TMP_DIR}/bodhi.template" ++ CACHE FILEPATH "Bodhi template file" ++ ) ++ ++ SET(FEDPKG_DIR "${CMAKE_BINARY_DIR}/FedPkg" CACHE PATH "FedPkg dir") ++ FILE(MAKE_DIRECTORY ${FEDPKG_DIR}) ++ ++ GET_FILENAME_COMPONENT(_FEDPKG_DIR_NAME ${FEDPKG_DIR} NAME) ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES "/${_FEDPKG_DIR_NAME}/") ++ ++ ## Fedora package variables ++ SET(FEDORA_KARMA "3" CACHE STRING "Fedora Karma") ++ SET(FEDORA_UNSTABLE_KARMA "-3" CACHE STRING "Fedora unstable Karma") ++ SET(FEDORA_AUTO_KARMA "True" CACHE STRING "Fedora auto Karma") ++ ++ FIND_PROGRAM(KOJI_BUILD_SCRATCH_CMD ${KOJI_BUILD_SCRATCH} PATHS ${CMAKE_BINARY_DIR}/scripts . ) ++ IF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program koji_build_scratch is not found!") ++ ENDIF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND") ++ ++ SET(FEDPKG_PRJ_DIR "${FEDPKG_DIR}/${PROJECT_NAME}") ++ ++ ## Don't use what is in git, otherwise it will be cleaned ++ ## By make clean ++ SET(FEDPKG_PRJ_DIR_GIT "${FEDPKG_PRJ_DIR}/.git/.cmake-fedora") ++ ++ ADD_CUSTOM_COMMAND(OUTPUT ${FEDPKG_PRJ_DIR_GIT} ++ COMMAND [ -d ${FEDPKG_PRJ_DIR} ] || ${FEDPKG_CMD} clone ${PROJECT_NAME} ++ COMMAND ${CMAKE_COMMAND} -E touch ${FEDPKG_PRJ_DIR_GIT} ++ COMMENT "Making FedPkg directory" ++ WORKING_DIRECTORY ${FEDPKG_DIR} ++ VERBATIM ++ ) ++ ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) ++ ++ FUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH) ++ IF(NOT _manage_release_fedora_dependencies_missing) ++ ADD_CUSTOM_TARGET(koji_build_scratch ++ COMMAND ${KOJI_BUILD_SCRATCH_CMD} ${PRJ_SRPM_FILE} ${ARGN} ++ DEPENDS "${PRJ_SRPM_FILE}" ++ COMMENT "koji scratch build on ${PRJ_SRPM_FILE}" ++ VERBATIM ++ ) ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) ++ ADD_DEPENDENCIES(koji_build_scratch rpmlint) ++ ADD_DEPENDENCIES(tag_pre koji_build_scratch) ++ ENDFUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH) ++ ++ # Convert fedora koji tag to bodhi tag ++ FUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag) ++ STRING(REGEX REPLACE "f([0-9]+)" "fc\\1" _tag_replace "${tag}") ++ IF(_tag_replace STREQUAL "") ++ SET(${bodhiTag} "${tag}" PARENT_SCOPE) ++ ELSE(_tag_replace STREQUAL "") ++ SET(${bodhiTag} "${_tag_replace}" PARENT_SCOPE) ++ ENDIF(_tag_replace STREQUAL "") ++ ENDFUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag) ++ ++ FUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag) ++ IF(NOT _manage_release_fedora_dependencies_missing) ++ SET(_branch ${tag}) ++ IF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") ++ SET(_branch "master") ++ ENDIF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") ++ ++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}") ++ ++ ## Fedpkg import and commit ++ SET(_import_opt "") ++ IF(NOT ver EQUAL FEDORA_RAWHIDE_VER) ++ SET(_import_opt "-b ${tag}") ++ ENDIF(NOT ver EQUAL FEDORA_RAWHIDE_VER) ++ ++ #Commit summary ++ IF (DEFINED CHANGE_SUMMARY) ++ SET (COMMIT_MSG "-m" "${CHANGE_SUMMARY}") ++ ELSE(DEFINED CHANGE_SUMMARY) ++ SET (COMMIT_MSG "-m" "On releasing ${PRJ_VER}-${PRJ_RELEASE_NO}") ++ ENDIF(DEFINED CHANGE_SUMMARY) ++ # Depends on tag file instead of target "tag" ++ # To avoid excessive scratch build and rpmlint ++ SET(_commit_opt --push --tag ) ++ ++ SET(_fedpkg_nvrd "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}") ++ SET(_fedpkg_nvrd_commit_file ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.commit") ++ ++ IF(_branch STREQUAL "master") ++ # Can't use ADD_CUSTOM_TARGET_COMMAND here, as the COMMIT_SUMMARY may have semi-colon ':' ++ ADD_CUSTOM_COMMAND(OUTPUT "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" ++ COMMAND test -d ${PROJECT_NAME} || ${FEDPKG_CMD} clone ${PROJECT_NAME} ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} ++ COMMAND ${GIT_CMD} pull --all ++ COMMAND ${FEDPKG_CMD} import "${PRJ_SRPM_FILE}" ++ COMMAND ${FEDPKG_CMD} commit ${_commit_opt} -m "${CHANGE_SUMMARY}" ++ COMMAND ${GIT_CMD} push --all ++ COMMAND ${CMAKE_COMMAND} -E touch "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" ++ DEPENDS "${FEDPKG_PRJ_DIR_GIT}" "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" "${PRJ_SRPM_FILE}" ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} ++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit ++ DEPENDS ${FEDPKG_NVR_RAWHIDE_COMMIT_FILE} ++ ) ++ ELSE(_branch STREQUAL "master") ++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_commit_file}" ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} ++ COMMAND ${GIT_CMD} pull ++ COMMAND ${GIT_CMD} merge -m "Merge branch 'master' into ${_branch}" master ++ COMMAND ${FEDPKG_CMD} push ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_commit_file}" ++ DEPENDS "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} ++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit ++ DEPENDS "${_fedpkg_nvrd_commit_file}" ++ ) ++ ENDIF(_branch STREQUAL "master") ++ ++ ## Fedpkg build ++ SET(_fedpkg_nvrd_build_file ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}") ++ ++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_build_file}" ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} ++ COMMAND ${FEDPKG_CMD} build ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}" ++ DEPENDS "${_fedpkg_nvrd_commit_file}" ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} ++ COMMENT "fedpkg build on ${_branch}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_build ++ DEPENDS "${_fedpkg_nvrd_build_file}" ++ ) ++ ++ ADD_DEPENDENCIES(bodhi_new fedpkg_${_branch}_build) ++ ++ ## Fedpkg update ++ SET(_fedpkg_nvrd_update_file ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.update") ++ ++ ADD_CUSTOM_TARGET_COMMAND(fedpkg_${_branch}_update ++ OUTPUT "${_fedpkg_nvrd_update_file}" ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} ++ COMMAND ${FEDPKG_CMD} update ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}" ++ DEPENDS ${_fedpkg_nvrd_build_file} ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} ++ COMMENT "fedpkg build on ${_branch}" ++ VERBATIM ++ ) ++ ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) ++ ENDFUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag) ++ ++ MACRO(_append_notes _file) ++ STRING(REGEX REPLACE "\n" "\n " _notes "${CHANGELOG_ITEMS}") ++ FILE(APPEND "${_file}" "notes=${_notes}\n\n") ++ ENDMACRO(_append_notes _file) ++ ++ FUNCTION(RELEASE_APPEND_BODHI_FILE tag) ++ IF(NOT _manage_release_fedora_dependencies_missing) ++ # Rawhide does not go to bodhi ++ IF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") ++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}") ++ ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "[${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}]\n\n") ++ ++ IF(BODHI_UPDATE_TYPE) ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=${BODHI_UPDATE_TYPE}\n\n") ++ ELSE(BODHI_UPDATE_TYPE) ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=bugfix\n\n") ++ ENDIF(BODHI_UPDATE_TYPE) ++ ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "request=testing\n") ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "bugs=${REDHAT_BUGZILLA}\n") ++ ++ _append_notes(${BODHI_TEMPLATE_FILE}) ++ ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "autokarma=${FEDORA_AUTO_KARMA}\n") ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "stable_karma=${FEDORA_KARMA}\n") ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "unstable_karma=${FEDORA_UNSTABLE_KARMA}\n") ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "close_bugs=True\n") ++ ++ IF(SUGGEST_REBOOT) ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=True\n") ++ ELSE(SUGGEST_REBOOT) ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=False\n\n") ++ ENDIF(SUGGEST_REBOOT) ++ ENDIF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) ++ ENDFUNCTION(RELEASE_APPEND_BODHI_FILE tag) ++ ++ FUNCTION(RELEASE_FEDORA) ++ IF(NOT _manage_release_fedora_dependencies_missing) ++ ## Parse tags ++ SET(_build_list "f${FEDORA_RAWHIDE_VER}") ++ FOREACH(_rel ${ARGN}) ++ IF(_rel STREQUAL "fedora") ++ FOREACH(_ver ${FEDORA_SUPPORTED_VERS}) ++ LIST(APPEND _build_list "f${_ver}") ++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS}) ++ ELSEIF(_rel STREQUAL "epel") ++ FOREACH(_ver ${EPEL_SUPPORTED_VERS}) ++ LIST(APPEND _build_list "el${_ver}") ++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS}) ++ ELSE(_rel STREQUAL "fedora") ++ LIST(APPEND _build_list "${_rel}") ++ ENDIF(_rel STREQUAL "fedora") ++ ENDFOREACH(_rel ${ARGN}) ++ LIST(REMOVE_DUPLICATES _build_list) ++ ++ IF(BODHI_USER) ++ SET(_bodhi_login "-u ${BODHI_USER}") ++ ENDIF(BODHI_USER) ++ ++ ADD_CUSTOM_TARGET(bodhi_new ++ COMMAND ${BODHI_CMD} --new ${_bodhi_login} --file ${BODHI_TEMPLATE_FILE} ++ DEPENDS "${BODHI_TEMPLATE_FILE}" ++ COMMENT "Submit new release to bodhi (Fedora)" ++ VERBATIM ++ ) ++ ++ # NVRD: Name-Version-Release-Dist ++ SET(FEDPKG_NVR_RAWHIDE "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.fc${FEDORA_RAWHIDE_VER}") ++ SET(FEDPKG_NVR_RAWHIDE_COMMIT_FILE "${CMAKE_FEDORA_TMP_DIR}/${FEDPKG_NVR_RAWHIDE}.commit") ++ ++ ## Create targets ++ FILE(REMOVE "${BODHI_TEMPLATE_FILE}") ++ RELEASE_ADD_KOJI_BUILD_SCRATCH(${_build_list}) ++ FOREACH(_tag ${_build_list}) ++ RELEASE_ADD_FEDPKG_TARGETS("${_tag}") ++ RELEASE_APPEND_BODHI_FILE("${_tag}") ++ ENDFOREACH(_tag ${_build_list}) ++ ++ ADD_CUSTOM_TARGET(release_fedora ++ COMMENT "Release for Fedora") ++ ++ ADD_DEPENDENCIES(release_fedora bodhi_new) ++ ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) ++ ENDFUNCTION(RELEASE_FEDORA) ++ENDIF(NOT DEFINED _MANAGE_RELEASE_FEDORA_) ++ +--- /dev/null ++++ b/Modules/ManageSourceVersionControl.cmake +@@ -0,0 +1,137 @@ ++# - Module for manipulate source version control systems. ++# This module provides an universal interface for supported ++# source version control systems, namely: ++# Git, Mercurial and SVN. ++# ++# Following targets are defined for each source version control (in Git terminology): ++# - tag: Tag the working tree with PRJ_VER and CHANGE_SUMMARY. ++# This target also does: ++# 1. Ensure there is nothing uncommitted. ++# 2. Push the commits and tags to server ++# - tag_pre: Targets that 'tag' depends on. ++# So you can push some check before the tag. ++# - after_release_commit: ++# This target does some post release chores, such as ++# updating ChangeLog.prev and RPM-ChangeLog.prev, then push them to server. ++# ++# Following variables are defined for each source version control: ++# - MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE: ++# The file that would be touched after target tag is completed. ++# ++# ++ ++IF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_) ++ SET(_MANAGE_SOURCE_VERSION_CONTROL_CMAKE_ "DEFINED") ++ SET(_after_release_message "After released ${PRJ_VER}") ++ INCLUDE(ManageTarget) ++ ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON) ++ ADD_CUSTOM_TARGET(tag_pre ++ COMMENT "Pre-tagging check" ++ ) ++ ++ ++ ADD_CUSTOM_TARGET(after_release_commit_pre ++ COMMENT "Before 'after_release_commit'" ++ ) ++ ++ IF(TARGET changelog_prev_update) ++ ADD_DEPENDENCIES(after_release_commit_pre changelog_prev_update) ++ ENDIF(TARGET changelog_prev_update) ++ ++ IF(TARGET rpm_changelog_prev_update) ++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update) ++ ENDIF(TARGET rpm_changelog_prev_update) ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON) ++ ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT) ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE ++ ${CMAKE_SOURCE_DIR}/.git/refs/tags/${PRJ_VER} ++ CACHE PATH "Source Version Control Tag File" FORCE) ++ ++ ADD_CUSTOM_TARGET(after_release_commit ++ COMMAND make after_release_commit_pre ++ COMMAND git commit -a -m "${_after_release_message}" ++ COMMAND git push ++ COMMENT "After released ${PRJ_VER}" ++ VERBATIM ++ ) ++ ++ # Can't use ADD_CUSTOM_TARGET here, as the COMMIT_SUMMARY may have semi-colon ':' ++ ADD_CUSTOM_TARGET(tag ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" ++ ) ++ ++ ADD_CUSTOM_TARGET(commit_clean ++ COMMAND git diff --exit-code ++ COMMENT "Is git commit clean?" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_COMMAND(OUTPUT ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE} ++ COMMAND make commit_clean ++ COMMAND make tag_pre ++ COMMAND git tag -a -m "${CHANGE_SUMMARY}" "${PRJ_VER}" HEAD ++ COMMENT "Tagging the source as ver ${PRJ_VER}" ++ VERBATIM ++ ) ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT) ++ ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_HG) ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE ++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER} ++ CACHE PATH "Source Version Control Tag File" FORCE) ++ ++ ADD_CUSTOM_TARGET(after_release_commit ++ COMMAND make after_release_commit_pre ++ COMMAND hg commit -m "${_after_release_message}" ++ COMMAND hg push ++ COMMENT "After released ${PRJ_VER}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(tag ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" ++ ) ++ ++ ADD_CUSTOM_COMMAND(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" ++ COMMAND make tag_pre ++ COMMAND hg tag -m "${CHANGE_SUMMARY}" "${PRJ_VER}" ++ COMMAND ${CMAKE_COMMAND} -E touch "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" ++ COMMENT "Tagging the source as ver ${PRJ_VER}" ++ VERBATIM ++ ) ++ ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_HG) ++ ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN) ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE ++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER} ++ CACHE PATH "Source Version Control Tag File" FORCE) ++ ++ ADD_CUSTOM_TARGET(after_release_commit ++ COMMAND make after_release_commit_pre ++ COMMAND svn commit -m "${_after_release_message}" ++ COMMENT "After released ${PRJ_VER}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(tag ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" ++ ) ++ ++ ADD_CUSTOM_TARGET(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" ++ COMMAND make tag_pre ++ COMMAND svn copy "${SOURCE_BASE_URL}/trunk" "${SOURCE_BASE_URL}/tags/${PRJ_VER}" -m "${CHANGE_SUMMARY}" ++ COMMAND cmake -E touch ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE} ++ COMMENT "Tagging the source as ver ${PRJ_VER}" ++ VERBATIM ++ ) ++ ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN) ++ ++ENDIF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageString.cmake +@@ -0,0 +1,325 @@ ++# - Collection of String utility macros. ++# ++# Included by: ++# ManageVarible ++# ++# Defines the following macros: ++# STRING_TRIM(var str [NOUNQUOTE]) ++# - Trim a string by removing the leading and trailing spaces, ++# just like STRING(STRIP ...) in CMake 2.6 and later. ++# This macro is needed as CMake 2.4 does not support STRING(STRIP ..) ++# This macro also remove quote and double quote marks around the string, ++# unless NOUNQUOTE is defined. ++# * Parameters: ++# + var: A variable that stores the result. ++# + str: A string. ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. ++# ++# STRING_ESCAPE_SEMICOLON(var str) ++# - Escape the semicolon ++# * Parameters: ++# + var: A variable that stores the result. ++# + str: A string. ++# ++# STRING_UNQUOTE(var str) ++# - Remove double quote marks and quote marks around a string. ++# If the string is not quoted, then content of str is copied to var ++# * Parameters: ++# + var: A variable that stores the result. ++# + str: A string. ++# ++# STRING_JOIN(var delimiter str_list [str...]) ++# - Concatenate strings, with delimiter inserted between strings. ++# * Parameters: ++# + var: A variable that stores the result. ++# + str_list: A list of string. ++# + str: (Optional) more string to be join. ++# ++# STRING_SPLIT(var delimiter str [NOESCAPE_SEMICOLON]) ++# - Split a string into a list using a delimiter, which can be in 1 or more ++# characters long. ++# * Parameters: ++# + var: A variable that stores the result. ++# + delimiter: To separate a string. ++# + str: A string. ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. ++# ++ ++IF(NOT DEFINED _MANAGE_STRING_CMAKE_) ++ SET(_MANAGE_STRING_CMAKE_ "DEFINED") ++ ++ # Return (index of lefttmost non match character) ++ # Return _strLen if all characters matches regex ++ FUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str regex) ++ STRING(LENGTH "${str}" _strLen) ++ SET(_index 0) ++ SET(_ret ${_strLen}) ++ WHILE(_index LESS _strLen) ++ STRING(SUBSTRING "${str}" ${_index} 1 _strCursor) ++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}") ++ IF(NOT "${_strCursor}" MATCHES "${regex}") ++ SET(_ret ${_index}) ++ SET(_index ${_strLen}) ++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}") ++ ++ MATH(EXPR _index ${_index}+1) ++ ENDWHILE(_index LESS _strLen) ++ SET(${var} ${_ret} PARENT_SCOPE) ++ ENDFUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str) ++ ++ # Return (index of rightmost non match character) +1 ++ # Return 0 if all characters matches regex ++ # ++ FUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str regex) ++ STRING(LENGTH "${str}" _strLen) ++ MATH(EXPR _index ${_strLen}) ++ SET(_ret 0) ++ WHILE(_index GREATER 0) ++ MATH(EXPR _index_1 ${_index}-1) ++ STRING(SUBSTRING "${str}" ${_index_1} 1 _strCursor) ++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}") ++ ++ IF(NOT "${_strCursor}" MATCHES "${regex}") ++ SET(_ret ${_index}) ++ SET(_index 0) ++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}") ++ MATH(EXPR _index ${_index}-1) ++ ENDWHILE(_index GREATER 0) ++ SET(${var} ${_ret} PARENT_SCOPE) ++ ENDFUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str) ++ ++ FUNCTION(STRING_TRIM var str) ++ #_STRING_ESCAPE(_ret "${str}" ${ARGN}) ++ STRING_LEFTMOST_NOTMATCH_INDEX(_leftIndex "${str}" "[ \t\n\r]") ++ STRING_RIGHTMOST_NOTMATCH_INDEX(_rightIndex "${str}" "[ \t\n\r]") ++ #MESSAGE("_left=${_leftIndex} _rightIndex=${_rightIndex} str=|${str}|") ++ MATH(EXPR _subLen ${_rightIndex}-${_leftIndex}) ++ SET(_NOUNQUOTE 0) ++ FOREACH( _arg ${ARGN}) ++ IF(_arg STREQUAL "NOUNQUOTE") ++ SET(_NOUNQUOTE 1) ++ ENDIF(_arg STREQUAL "NOUNQUOTE") ++ ENDFOREACH( _arg ${ARGN}) ++ ++ IF(_subLen GREATER 0) ++ STRING(SUBSTRING "${str}" ${_leftIndex} ${_subLen} _ret) ++ # IF _subLen > 1 ++ # IF UNQUOTE; then unquote ++ # Otherwise don't touch ++ IF (_subLen GREATER 1) ++ IF(NOT _NOUNQUOTE) ++ STRING_UNQUOTE(_ret "${_ret}") ++ ENDIF(NOT _NOUNQUOTE) ++ ENDIF (_subLen GREATER 1) ++ ELSE(_subLen GREATER 0) ++ SET(_ret "") ++ ENDIF(_subLen GREATER 0) ++ SET(${var} "${_ret}" PARENT_SCOPE) ++ ++ # Unencoding ++ #_STRING_UNESCAPE(${var} "${_ret}" ${ARGN}) ++ ENDFUNCTION(STRING_TRIM var str) ++ ++ MACRO(STRING_ESCAPE_SEMICOLON var str) ++ STRING(REGEX REPLACE ";" "\\\\;" ${var} "${str}") ++ ENDMACRO(STRING_ESCAPE_SEMICOLON var str) ++ ++ # Internal macro ++ # Nested Variable cannot be escaped here, as variable is already substituted ++ # at the time it passes to this macro. ++ MACRO(_STRING_ESCAPE var str) ++ # ';' and '\' are tricky, need to be encoded. ++ # '#' => '#H' ++ # '\' => '#B' ++ # ';' => '#S' ++ SET(_NOESCAPE_SEMICOLON "") ++ SET(_NOESCAPE_HASH "") ++ ++ FOREACH(_arg ${ARGN}) ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") ++ ELSEIF(${_arg} STREQUAL "NOESCAPE_HASH") ++ SET(_NOESCAPE_HASH "NOESCAPE_HASH") ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ ENDFOREACH(_arg ${ARGN}) ++ ++ IF(_NOESCAPE_HASH STREQUAL "") ++ STRING(REGEX REPLACE "#" "#H" _ret "${str}") ++ ELSE(_NOESCAPE_HASH STREQUAL "") ++ SET(_ret "${str}") ++ ENDIF(_NOESCAPE_HASH STREQUAL "") ++ ++ STRING(REGEX REPLACE "\\\\" "#B" _ret "${_ret}") ++ IF(_NOESCAPE_SEMICOLON STREQUAL "") ++ STRING(REGEX REPLACE ";" "#S" _ret "${_ret}") ++ ENDIF(_NOESCAPE_SEMICOLON STREQUAL "") ++ #MESSAGE("_STRING_ESCAPE:_ret=${_ret}") ++ SET(${var} "${_ret}") ++ ENDMACRO(_STRING_ESCAPE var str) ++ ++ MACRO(_STRING_UNESCAPE var str) ++ # '#B' => '\' ++ # '#H' => '#' ++ # '#D' => '$' ++ # '#S' => ';' ++ SET(_ESCAPE_VARIABLE "") ++ SET(_NOESCAPE_SEMICOLON "") ++ SET(_ret "${str}") ++ FOREACH(_arg ${ARGN}) ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") ++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE") ++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE") ++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}") ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ ENDFOREACH(_arg ${ARGN}) ++ #MESSAGE("###_STRING_UNESCAPE: var=${var} _ret=${_ret} _NOESCAPE_SEMICOLON=${_NOESCAPE_SEMICOLON} ESCAPE_VARIABLE=${_ESCAPE_VARIABLE}") ++ ++ STRING(REGEX REPLACE "#B" "\\\\" _ret "${_ret}") ++ IF("${_NOESCAPE_SEMICOLON}" STREQUAL "") ++ # ESCAPE_SEMICOLON ++ STRING(REGEX REPLACE "#S" "\\\\;" _ret "${_ret}") ++ ELSE("${_NOESCAPE_SEMICOLON}" STREQUAL "") ++ # Don't ESCAPE_SEMICOLON ++ STRING(REGEX REPLACE "#S" ";" _ret "${_ret}") ++ ENDIF("${_NOESCAPE_SEMICOLON}" STREQUAL "") ++ ++ IF(NOT _ESCAPE_VARIABLE STREQUAL "") ++ # '#D' => '$' ++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}") ++ ENDIF(NOT _ESCAPE_VARIABLE STREQUAL "") ++ STRING(REGEX REPLACE "#H" "#" _ret "${_ret}") ++ SET(${var} "${_ret}") ++ #MESSAGE("*** _STRING_UNESCAPE: ${var}=${${var}}") ++ ENDMACRO(_STRING_UNESCAPE var str) ++ ++ MACRO(STRING_UNQUOTE var str) ++ SET(_ret "${str}") ++ STRING(LENGTH "${str}" _strLen) ++ ++ # IF _strLen > 1 ++ # IF lCh and rCh are both "\"" ++ # Remove _lCh and _rCh ++ # ELSEIF lCh and rCh are both "'" ++ # Remove _lCh and _rCh ++ # Otherwise don't touch ++ IF(_strLen GREATER 1) ++ STRING(SUBSTRING "${str}" 0 1 _lCh) ++ MATH(EXPR _strLen_1 ${_strLen}-1) ++ MATH(EXPR _strLen_2 ${_strLen_1}-1) ++ STRING(SUBSTRING "${str}" ${_strLen_1} 1 _rCh) ++ #MESSAGE("_lCh=${_lCh} _rCh=${_rCh} _ret=|${_ret}|") ++ IF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"") ++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret) ++ ELSEIF("${_lCh}" STREQUAL "'" AND "${_rCh}" STREQUAL "'") ++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret) ++ ENDIF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"") ++ ENDIF (_strLen GREATER 1) ++ SET(${var} "${_ret}") ++ ENDMACRO(STRING_UNQUOTE var str) ++ ++ MACRO(STRING_JOIN var delimiter str_list) ++ SET(_ret "") ++ FOREACH(_str ${str_list}) ++ IF(_ret STREQUAL "") ++ SET(_ret "${_str}") ++ ELSE(_ret STREQUAL "") ++ SET(_ret "${_ret}${delimiter}${_str}") ++ ENDIF(_ret STREQUAL "") ++ ENDFOREACH(_str ${str_list}) ++ ++ FOREACH(_str ${ARGN}) ++ IF(_ret STREQUAL "") ++ SET(_ret "${_str}") ++ ELSE(_ret STREQUAL "") ++ SET(_ret "${_ret}${delimiter}${_str}") ++ ENDIF(_ret STREQUAL "") ++ ENDFOREACH(_str ${ARGN}) ++ SET(${var} "${_ret}") ++ ENDMACRO(STRING_JOIN var delimiter str_list) ++ ++ FUNCTION(STRING_FIND var str search_str) ++ STRING(LENGTH "${str}" _str_len) ++ STRING(LENGTH "${search_str}" _search_len) ++ MATH(EXPR _str_end ${_str_len}-${_search_len}+1) ++ ++ SET(_index 0) ++ SET(_str_remain "") ++ SET(_result -1) ++ WHILE(_index LESS _str_end) ++ STRING(SUBSTRING "${str}" ${_index} ${_search_len} _str_window) ++ IF("${_str_window}" STREQUAL "${search_str}") ++ SET(_result ${_index}) ++ BREAK() ++ ELSE("${_str_window}" STREQUAL "${search_str}") ++ MATH(EXPR _index ${_index}+1) ++ ENDIF("${_str_window}" STREQUAL "${search_str}") ++ ENDWHILE(_index LESS _str_end) ++ SET(${var} ${_result} PARENT_SCOPE) ++ ENDFUNCTION(STRING_FIND var str search) ++ ++ FUNCTION(STRING_SPLIT_2 var str_remain delimiter str) ++ STRING_FIND(_index "${str}" "${delimiter}") ++ IF(_index EQUAL -1) ++ SET(${var} "${str}" PARENT_SCOPE) ++ SET(${str_remain} "" PARENT_SCOPE) ++ ELSE(_index EQUAL -1) ++ STRING(SUBSTRING "${str}" 0 ${_index} _var) ++ SET(${var} "${_var}" PARENT_SCOPE) ++ ++ STRING(LENGTH "${str}" _str_len) ++ STRING(LENGTH "${delimiter}" _delimiter_len) ++ MATH(EXPR _str_2_start ${_index}+${_delimiter_len}) ++ MATH(EXPR _str_2_len ${_str_len}-${_index}-${_delimiter_len}) ++ STRING(SUBSTRING "${str}" ${_str_2_start} ${_str_2_len} _str_remain) ++ SET(${str_remain} "${_str_remain}" PARENT_SCOPE) ++ ENDIF(_index EQUAL -1) ++ ENDFUNCTION(STRING_SPLIT_2 var str_remain delimiter str) ++ ++ MACRO(STRING_SPLIT var delimiter str) ++ #MESSAGE("***STRING_SPLIT: var=${var} str=${str}") ++ SET(_max_tokens "") ++ SET(_NOESCAPE_SEMICOLON "") ++ SET(_ESCAPE_VARIABLE "") ++ FOREACH(_arg ${ARGN}) ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") ++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE") ++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE") ++ ELSE(${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ SET(_max_tokens ${_arg}) ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ ENDFOREACH(_arg ${ARGN}) ++ ++ IF(NOT _max_tokens) ++ SET(_max_tokens -1) ++ ENDIF(NOT _max_tokens) ++ ++ _STRING_ESCAPE(_str "${str}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) ++ _STRING_ESCAPE(_delimiter "${delimiter}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) ++ SET(_str_list "") ++ SET(_token_count 1) ++ ++ WHILE(NOT _token_count EQUAL _max_tokens) ++ STRING_SPLIT_2(_token _str "${_delimiter}" "${_str}") ++ #MESSAGE("_token_count=${_token_count} _max_tokens=${_max_tokens} _token=${_token} _str=${_str}") ++ MATH(EXPR _token_count ${_token_count}+1) ++ LIST(APPEND _str_list "${_token}") ++ IF("${_str}" STREQUAL "") ++ ## No more tokens ++ BREAK() ++ ENDIF("${_str}" STREQUAL "") ++ ENDWHILE(NOT _token_count EQUAL _max_tokens) ++ ++ IF(NOT "x${_str}" STREQUAL "x") ++ ## Append last part ++ LIST(APPEND _str_list "${_str}") ++ ENDIF(NOT "x${_str}" STREQUAL "x") ++ ++ # Unencoding ++ _STRING_UNESCAPE(${var} "${_str_list}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) ++ #MESSAGE("***STRING_SPLIT: tokens=${${var}}") ++ ENDMACRO(STRING_SPLIT var delimiter str) ++ ++ENDIF(NOT DEFINED _MANAGE_STRING_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageTarget.cmake +@@ -0,0 +1,40 @@ ++# - Modules for managing targets and outputs. ++# ++# Defines following macros: ++# ADD_CUSTOM_TARGET_COMMAND(target OUTPUT file1 [file2 ..] COMMAND ++# command1 ...) ++# - Combine ADD_CUSTOM_TARGET and ADD_CUSTOM_COMMAND. ++# Always build when making the target, also specify the output files ++# Arguments: ++# + target: target for this command ++# + file1, file2 ... : Files to be outputted by this command ++# + command1 ... : Command to be run. The rest arguments are same with ++# ADD_CUSTOM_TARGET. ++# ++ ++IF(NOT DEFINED _MANAGE_TARGET_CMAKE_) ++ SET(_MANAGE_TARGET_CMAKE_ "DEFINED") ++ MACRO(ADD_CUSTOM_TARGET_COMMAND target OUTPUT) ++ SET(_outputFileList "") ++ SET(_optionList "") ++ SET(_outputFileMode 1) ++ FOREACH(_t ${ARGN}) ++ IF(_outputFileMode) ++ IF(_t STREQUAL "COMMAND") ++ SET(_outputFileMode 0) ++ LIST(APPEND _optionList "${_t}") ++ ELSE(_t STREQUAL "COMMAND") ++ LIST(APPEND _outputFileList "${_t}") ++ ENDIF(_t STREQUAL "COMMAND") ++ ELSE(_outputFileMode) ++ LIST(APPEND _optionList "${_t}") ++ ENDIF(_outputFileMode) ++ ENDFOREACH(_t ${ARGN}) ++ #MESSAGE("ADD_CUSTOM_TARGET(${target} ${_optionList})") ++ ADD_CUSTOM_TARGET(${target} ${_optionList}) ++ #MESSAGE("ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList})") ++ ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList}) ++ ENDMACRO(ADD_CUSTOM_TARGET_COMMAND) ++ ++ENDIF(NOT DEFINED _MANAGE_TARGET_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageTranslation.cmake +@@ -0,0 +1,305 @@ ++# - Software Translation support ++# This module supports software translation by: ++# 1) Creates gettext related targets. ++# 2) Communicate to Zanata servers. ++# ++# Defines following targets: ++# + translations: Make the translation files. ++# This target itself does nothing but provide a target for others to ++# depend on. ++# If macro MANAGE_GETTEXT is used, then it depends on the target gmo_files. ++# ++# Defines following variables: ++# + XGETTEXT_OPTIONS_C: Usual xgettext options for C programs. ++# ++# Defines following macros: ++# MANAGE_GETTEXT [ALL] SRCS src1 [src2 [...]] ++# [LOCALES locale1 [locale2 [...]]] ++# [POTFILE potfile] ++# [XGETTEXT_OPTIONS xgettextOpt]] ++# ) ++# - Provide Gettext support like pot file generation and ++# gmo file generation. ++# You can specify supported locales with LOCALES ... ++# or omit the locales to use all the po files. ++# ++# Arguments: ++# + ALL: (Optional) make target "all" depends on gettext targets. ++# + SRCS src1 [src2 [...]]: File list of source code that contains msgid. ++# + LOCALES locale1 [local2 [...]]:(optional) Locale list to be generated. ++# Currently, only the format: lang_Region (such as fr_FR) is supported. ++# + POTFILE potFile: (optional) pot file to be referred. ++# Default: ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot ++# + XGETTEXT_OPTIONS xgettextOpt: (optional) xgettext_options. ++# Default: ${XGETTEXT_OPTIONS_C} ++# Defines following variables: ++# + GETTEXT_MSGMERGE_CMD: the full path to the msgmerge tool. ++# + GETTEXT_MSGFMT_CMD: the full path to the msgfmt tool. ++# + XGETTEXT_CMD: the full path to the xgettext. ++# Targets: ++# + pot_file: Generate the pot_file. ++# + gmo_files: Converts input po files into the binary output mo files. ++# ++# MANAGE_ZANATA(serverUrl [YES]) ++# - Use Zanata (was flies) as translation service. ++# Arguments: ++# + serverUrl: The URL of Zanata server ++# + YES: Assume yes for all questions. ++# Reads following variables: ++# + ZANATA_XML_FILE: Path to zanata.xml ++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml ++# + ZANATA_INI_FILE: Path to zanata.ini ++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml ++# + ZANATA_PUSH_OPTIONS: Options for zanata push ++# + ZANATA_PULL_OPTIONS: Options for zanata pull ++# Targets: ++# + zanata_project_create: Create project with PROJECT_NAME in zanata ++# server. ++# + zanata_version_create: Create version PRJ_VER in zanata server. ++# + zanata_push: Push source messages to zanata server ++# + zanata_push_trans: Push source messages and translations to zanata server. ++# + zanata_pull: Pull translations from zanata server. ++# ++ ++ ++IF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_) ++ SET(_MANAGE_TRANSLATION_CMAKE_ "DEFINED") ++ SET(XGETTEXT_OPTIONS_C ++ --language=C --keyword=_ --keyword=N_ --keyword=C_:1c,2 --keyword=NC_:1c,2 -s ++ --package-name=${PROJECT_NAME} --package-version=${PRJ_VER}) ++ SET(MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS "--indent" "--update" "--backup=none" CACHE STRING "msgmerge options") ++ SET_DIRECTORY_PROPERTIES(PROPERTIES CLEAN_NO_CUSTOM "1") ++ ++ INCLUDE(ManageMessage) ++ IF(NOT TARGET translations) ++ ADD_CUSTOM_TARGET(translations ++ COMMENT "Making translations" ++ ) ++ ENDIF(NOT TARGET translations) ++ ++ #======================================== ++ # GETTEXT support ++ ++ MACRO(MANAGE_GETTEXT_INIT) ++ FIND_PROGRAM(XGETTEXT_CMD xgettext) ++ IF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND") ++ SET(_gettext_dependency_missing 1) ++ M_MSG(${M_OFF} "xgettext not found! gettext support disabled.") ++ ENDIF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND") ++ ++ FIND_PROGRAM(GETTEXT_MSGMERGE_CMD msgmerge) ++ IF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND") ++ SET(_gettext_dependency_missing 1) ++ M_MSG(${M_OFF} "msgmerge not found! gettext support disabled.") ++ ENDIF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND") ++ ++ FIND_PROGRAM(GETTEXT_MSGFMT_CMD msgfmt) ++ IF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND") ++ SET(_gettext_dependency_missing 1) ++ M_MSG(${M_OFF} "msgfmt not found! gettext support disabled.") ++ ENDIF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND") ++ ++ ENDMACRO(MANAGE_GETTEXT_INIT) ++ ++ FUNCTION(MANAGE_GETTEXT) ++ SET(_gettext_dependency_missing 0) ++ MANAGE_GETTEXT_INIT() ++ IF(NOT _gettext_dependency_missing) ++ SET(_stage "") ++ SET(_all "") ++ SET(_srcList "") ++ SET(_srcList_abs "") ++ SET(_localeList "") ++ SET(_potFile "") ++ SET(_xgettext_option_list "") ++ FOREACH(_arg ${ARGN}) ++ IF(_arg STREQUAL "ALL") ++ SET(_all "ALL") ++ ELSEIF(_arg STREQUAL "SRCS") ++ SET(_stage "SRCS") ++ ELSEIF(_arg STREQUAL "LOCALES") ++ SET(_stage "LOCALES") ++ ELSEIF(_arg STREQUAL "XGETTEXT_OPTIONS") ++ SET(_stage "XGETTEXT_OPTIONS") ++ ELSEIF(_arg STREQUAL "POTFILE") ++ SET(_stage "POTFILE") ++ ELSE(_arg STREQUAL "ALL") ++ IF(_stage STREQUAL "SRCS") ++ FILE(RELATIVE_PATH _relFile ${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/${_arg}) ++ LIST(APPEND _srcList ${_relFile}) ++ GET_FILENAME_COMPONENT(_absPoFile ${_arg} ABSOLUTE) ++ LIST(APPEND _srcList_abs ${_absPoFile}) ++ ELSEIF(_stage STREQUAL "LOCALES") ++ LIST(APPEND _localeList ${_arg}) ++ ELSEIF(_stage STREQUAL "XGETTEXT_OPTIONS") ++ LIST(APPEND _xgettext_option_list ${_arg}) ++ ELSEIF(_stage STREQUAL "POTFILE") ++ SET(_potFile "${_arg}") ++ ELSE(_stage STREQUAL "SRCS") ++ M_MSG(${M_WARN} "MANAGE_GETTEXT: not recognizing arg ${_arg}") ++ ENDIF(_stage STREQUAL "SRCS") ++ ENDIF(_arg STREQUAL "ALL") ++ ENDFOREACH(_arg ${ARGN}) ++ ++ # Default values ++ IF(_xgettext_option_list STREQUAL "") ++ SET(_xgettext_option_list ${XGETTEXT_OPTIONS_C}) ++ ENDIF(_xgettext_option_list STREQUAL "") ++ ++ IF(_potFile STREQUAL "") ++ SET(_potFile "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot") ++ ENDIF(_potFile STREQUAL "") ++ ++ IF(NOT _localeList) ++ FILE(GLOB _poFiles "*.po") ++ FOREACH(_poFile ${_poFiles}) ++ GET_FILENAME_COMPONENT(_locale "${_poFile}" NAME_WE) ++ LIST(APPEND _localeList "${_locale}") ++ ENDFOREACH(_poFile ${_poFiles}) ++ ENDIF(NOT _localeList) ++ ++ M_MSG(${M_INFO2} "XGETTEXT=${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList}") ++ ADD_CUSTOM_COMMAND(OUTPUT ${_potFile} ++ COMMAND ${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList} ++ DEPENDS ${_srcList_abs} ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} ++ COMMENT "Extract translatable messages to ${_potFile}" ++ ) ++ ++ ADD_CUSTOM_TARGET(pot_file ${_all} ++ DEPENDS ${_potFile} ++ ) ++ ++ ### Generating gmo files ++ SET(_gmoFileList "") ++ SET(_absGmoFileList "") ++ SET(_absPoFileList "") ++ GET_FILENAME_COMPONENT(_potBasename ${_potFile} NAME_WE) ++ GET_FILENAME_COMPONENT(_potDir ${_potFile} PATH) ++ GET_FILENAME_COMPONENT(_absPotFile ${_potFile} ABSOLUTE) ++ GET_FILENAME_COMPONENT(_absPotDir ${_absPotFile} PATH) ++ FOREACH(_locale ${_localeList}) ++ SET(_absGmoFile ${_absPotDir}/${_locale}.gmo) ++ SET(_absPoFile ${_absPotDir}/${_locale}.po) ++ ++ ADD_CUSTOM_COMMAND(OUTPUT ${_absPoFile} ++ COMMAND ${GETTEXT_MSGMERGE_CMD} ++ ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile} ++ DEPENDS ${_potFile} ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} ++ COMMENT "${GETTEXT_MSGMERGE_CMD} ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile}" ++ ) ++ ++ ADD_CUSTOM_COMMAND(OUTPUT ${_absGmoFile} ++ COMMAND ${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile} ++ DEPENDS ${_absPoFile} ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} ++ COMMENT "${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile}" ++ ) ++ ++ #MESSAGE("_absPoFile=${_absPoFile} _absPotDir=${_absPotDir} _lang=${_lang} curr_bin=${CMAKE_CURRENT_BINARY_DIR}") ++ INSTALL(FILES ${_absGmoFile} DESTINATION share/locale/${_locale}/LC_MESSAGES RENAME ${_potBasename}.mo) ++ LIST(APPEND _absGmoFileList ${_absGmoFile}) ++ LIST(APPEND _absPoFileList ${_absPoFile}) ++ ENDFOREACH(_locale ${_localeList}) ++ SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES "${_absGmoFileList};${_potFile}" ) ++ ++ SET(MANAGE_TRANSLATION_GETTEXT_PO_FILES ${_absPoFileList} CACHE STRING "PO files") ++ ++ ADD_CUSTOM_TARGET(gmo_files ${_all} ++ DEPENDS ${_absGmoFileList} ++ COMMENT "Generate gmo files for translation" ++ ) ++ ++ ADD_DEPENDENCIES(translations gmo_files) ++ ENDIF(NOT _gettext_dependency_missing) ++ ENDFUNCTION(MANAGE_GETTEXT) ++ ++ ++ #======================================== ++ # ZANATA support ++ MACRO(MANAGE_ZANATA serverUrl) ++ SET(ZANATA_SERVER "${serverUrl}") ++ FIND_PROGRAM(ZANATA_CMD zanata) ++ SET(_manage_zanata_dependencies_missing 0) ++ IF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND") ++ SET(_manage_zanata_dependencies_missing 1) ++ M_MSG(${M_OFF} "zanata (python client) not found! zanata support disabled.") ++ ENDIF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND") ++ ++ SET(ZANATA_XML_FILE "${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml" CACHE FILEPATH "zanata.xml") ++ IF(NOT EXISTS "${ZANATA_XML_FILE}") ++ SET(_manage_zanata_dependencies_missing 1) ++ M_MSG(${M_OFF} "zanata.xml is not found! Zanata support disabled.") ++ ENDIF(NOT EXISTS "${ZANATA_XML_FILE}") ++ ++ SET(ZANATA_INI_FILE "$ENV{HOME}/.config/zanata.ini" CACHE FILEPATH "zanata.ni") ++ IF(NOT EXISTS "${ZANATA_INI_FILE}") ++ SET(_manage_zanata_dependencies_missing 1) ++ M_MSG(${M_OFF} "zanata.ini is not found! Zanata support disabled.") ++ ENDIF(NOT EXISTS "${ZANATA_INI_FILE}") ++ ++ IF(NOT _manage_zanata_dependencies_missing) ++ SET(_zanata_args --url "${ZANATA_SERVER}" ++ --project-config "${ZANATA_XML_FILE}" --user-config "${ZANATA_INI_FILE}") ++ ++ # Parsing arguments ++ SET(_yes "") ++ FOREACH(_arg ${ARGN}) ++ IF(_arg STREQUAL "YES") ++ SET(_yes "yes" "|") ++ ENDIF(_arg STREQUAL "YES") ++ ENDFOREACH(_arg ${ARGN}) ++ ++ ADD_CUSTOM_TARGET(zanata_project_create ++ COMMAND ${ZANATA_CMD} project create ${PROJECT_NAME} ${_zanata_args} ++ --project-name "${PROJECT_NAME}" --project-desc "${PRJ_SUMMARY}" ++ COMMENT "Creating project ${PROJECT_NAME} on Zanata server ${serverUrl}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(zanata_version_create ++ COMMAND ${ZANATA_CMD} version create ++ ${PRJ_VER} ${_zanata_args} --project-id "${PROJECT_NAME}" ++ COMMENT "Creating version ${PRJ_VER} on Zanata server ${serverUrl}" ++ VERBATIM ++ ) ++ ++ SET(_po_files_depend "") ++ IF(MANAGE_TRANSLATION_GETTEXT_PO_FILES) ++ SET(_po_files_depend "DEPENDS" ${MANAGE_TRANSLATION_GETTEXT_PO_FILES}) ++ ENDIF(MANAGE_TRANSLATION_GETTEXT_PO_FILES) ++ # Zanata push ++ ADD_CUSTOM_TARGET(zanata_push ++ COMMAND ${_yes} ++ ${ZANATA_CMD} push ${_zanata_args} ${ZANATA_PUSH_OPTIONS} ++ ${_po_files_depend} ++ COMMENT "Push source messages to zanata server ${ZANATA_SERVER}" ++ VERBATIM ++ ) ++ ADD_DEPENDENCIES(zanata_push pot_file) ++ ++ # Zanata push with translation ++ ADD_CUSTOM_TARGET(zanata_push_trans ++ COMMAND ${_yes} ++ ${ZANATA_CMD} push ${_zanata_args} --push-type both ${ZANATA_PUSH_OPTIONS} ++ ${_po_files_depend} ++ COMMENT "Push source messages and translations to zanata server ${ZANATA_SERVER}" ++ VERBATIM ++ ) ++ ++ ADD_DEPENDENCIES(zanata_push_trans pot_file) ++ ++ # Zanata pull ++ ADD_CUSTOM_TARGET(zanata_pull ++ COMMAND ${_yes} ++ ${ZANATA_CMD} pull ${_zanata_args} ${ZANATA_PULL_OPTIONS} ++ COMMENT "Pull translations fro zanata server ${ZANATA_SERVER}" ++ VERBATIM ++ ) ++ ++ ENDIF(NOT _manage_zanata_dependencies_missing) ++ ENDMACRO(MANAGE_ZANATA serverUrl) ++ ++ENDIF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageUninstall.cmake +@@ -0,0 +1,28 @@ ++# - Uninstall target. ++# Use this module to provide uninstall target. ++# ++# Define following targets ++# uninstall: For uninstalling the package. ++# ++ ++IF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_) ++ SET(_MANAGE_UNINSTALL_CMAKE_ "DEFINED") ++ SET(CMAKE_UNINSTALL_IN_SEARCH_PATH ${CMAKE_MODULE_PATH} ${CMAKE_ROOT}/Modules ${CMAKE_SOURCE_DIR} ${CMAKE_SOURCE_DIR}/Modules) ++ FIND_FILE(CMAKE_UNINSTALL_IN cmake_uninstall.cmake.in ++ PATHS ${CMAKE_UNINSTALL_IN_SEARCH_PATH}) ++ ++ # MESSAGE("CMAKE_UNINSTALL_IN=${CMAKE_UNINSTALL_IN}") ++ IF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND") ++ MESSAGE(FATAL_ERROR "Cannot find cmake_uninstall.cmake.in in" ++ "${CMAKE_UNINSTALL_IN_SEARCH_PATH}") ++ ENDIF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND") ++ ++ CONFIGURE_FILE("${CMAKE_UNINSTALL_IN}" ++ "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" ++ IMMEDIATE @ONLY) ++ ++ ADD_CUSTOM_TARGET(uninstall ++ "${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" ++ ) ++ENDIF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageUpload.cmake +@@ -0,0 +1,184 @@ ++# - Upload files to hosting services. ++# You can either use sftp, scp or supply custom command for upload. ++# The custom command should be in following format: ++# cmd [OPTIONS] [url] ++# ++# This module defines following macros: ++# MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias [uploadOptions]) ++# - Make a target for upload files. ++# If <varPrefix>_HOST_ALIAS is not empty, the target is ++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias}, otherwise, the target is ++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias} ++# Arguments: ++# + varPrefix: Variable prefix ++# + fileAlias: File alias which will be used as part of target name ++# + uploadOptions: Options for the upload command ++# Reads following variables: ++# + <varPrefix>_CMD: Upload command ++# + <varPrefix>_DEPENDS: Extra files that the upload load target depends on. ++# + <varPrefix>_HOST_ALIAS: (Optional) Host alias which will be used as part of target name. ++# + <varPrefix>_HOST_URL: Host URL ++# + <varPrefix>_REMOTE_DIR: (Optional) Remote dir/ ++# + <varPrefix>_UPLOAD_FILES: Files to be uploaded. The target depends on these files. ++# + <varPrefix>_UPLOAD_OPTIONS: Options for upload command. ++# + <varPrefix>_USER: (Optional) User for uploading ++# ++# This module defines following macros: ++# MANAGE_UPLOAD_CMD(cmd fileAlias [USER user] [HOST_URL hostUrl] ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] ++# [UPLOAD_OPTIONS options] [DEPENDS files]) ++# - Make a upload target for a upload command ++# Arguments: ++# + cmd: Command to do the ++# + fileAlias: File alias which will be used as part of target name ++# + DEPENDS files: Extra files that the upload load target depends on. ++# + HOST_ALIAS hostAlias: (Optional) Host alias which will be used as part of target name. ++# + HOST_URL hostUrl: Host URL ++# + REMOTE_DIR remoteDir: (Optional) Remote dir/ ++# + UPLOAD_FILES files : Files to be uploaded. The target depends on these files. ++# + UPLOAD_OPTIONS options: Options for upload command. ++# + USER user: (Optional) User for uploading ++# ++# MANAGE_UPLOAD_SFTP(fileAlias [USER user] [HOST_URL hostUrl] ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] ++# [UPLOAD_OPTIONS options] [DEPENDS files]) ++# - Make a upload target for sftp ++# Arguments: See section MANAGE_UPLOAD_CMD ++# ++# MANAGE_UPLOAD_SCP(fileAlias [USER user] [HOST_URL hostUrl] ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] ++# [UPLOAD_OPTIONS options] [DEPENDS files]) ++# - Make a upload target for scp ++# Arguments: See section MANAGE_UPLOAD_CMD ++# ++# MANAGE_UPLOAD_FEDORAHOSTED(fileAlias [USER user] ++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir] ++# [UPLOAD_OPTIONS options] [DEPENDS files]) ++# - Make a upload target for uploading to FedoraHosted ++# Arguments: See section MANAGE_UPLOAD_CMD ++# ++# MANAGE_UPLOAD_SOURCEFORGE(fileAlias [USER user] ++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir] ++# [UPLOAD_OPTIONS options] [DEPENDS files]) ++# - Make a upload target for uploading to SourceForge ++# Arguments: See section MANAGE_UPLOAD_CMD ++# ++# ++ ++IF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_) ++ SET(_MANAGE_UPLOAD_CMAKE_ "DEFINED") ++ INCLUDE(ManageMessage) ++ ++ # MANAGE_UPLOAD_GET_OPTIONS cmd [USER user] [HOST_URL hostUrl] [HOST_ALIAS hostAlias] ++ # [UPLOAD_FILES files] [REMOTE_DIR remoteDir] [UPLOAD_OPTIONS sftpOptions] [DEPENDS files] ++ ++ MACRO(_MANAGE_UPLOAD_GET_OPTIONS varList varPrefix) ++ SET(_optName "") ## OPTION name ++ SET(_opt "") ## Variable that hold option values ++ SET(VALID_OPTIONS "USER" "HOST_URL" "HOST_ALIAS" "UPLOAD_FILES" "REMOTE_DIR" "UPLOAD_OPTIONS" "DEPENDS") ++ FOREACH(_arg ${ARGN}) ++ LIST(FIND VALID_OPTIONS "${_arg}" _optIndex) ++ IF(_optIndex EQUAL -1) ++ IF(NOT _optName STREQUAL "") ++ ## Append to existing variable ++ LIST(APPEND ${_opt} "${_arg}") ++ SET(${_opt} "${_opt}" PARENT_SCOPE) ++ ENDIF(NOT _optName STREQUAL "") ++ ELSE(_optIndex EQUAL -1) ++ ## Obtain option name and variable name ++ LIST(GET VALID_OPTIONS ${_optIndex} _optName) ++ SET(_opt "${varPrefix}_${_optName}") ++ ++ ## If variable is not in varList, then set cache and add it to varList ++ LIST(FIND ${varList} "${_opt}" _varIndex) ++ IF(_varIndex EQUAL -1) ++ SET(${_opt} "" PARENT_SCOPE) ++ LIST(APPEND ${varList} "${_opt}") ++ ENDIF(_varIndex EQUAL -1) ++ ENDIF(_optIndex EQUAL -1) ++ ENDFOREACH(_arg ${ARGN}) ++ ENDMACRO(_MANAGE_UPLOAD_GET_OPTIONS varPrefix varList) ++ ++ MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias) ++ SET(_target "upload") ++ IF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "") ++ SET(_target "${_target}_${${varPrefix}_HOST_ALIAS}") ++ ENDIF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "") ++ SET(_target "${_target}_${fileAlias}") ++ ++ ## Determine url for upload ++ IF(NOT "${varPrefix}_HOST_URL" STREQUAL "") ++ IF("${varPrefix}_USER" STREQUAL "") ++ SET(UPLOAD_URL "${${varPrefix}_USER}@${${varPrefix}_HOST_URL}") ++ ELSE("${varPrefix}_USER" STREQUAL "") ++ SET(UPLOAD_URL "${${varPrefix}_HOST_URL}") ++ ENDIF("${varPrefix}_USER" STREQUAL "") ++ ELSE(NOT "${varPrefix}_HOST_URL" STREQUAL "") ++ SET(UPLOAD_URL "") ++ ENDIF(NOT "${varPrefix}_HOST_URL" STREQUAL "") ++ ++ IF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "") ++ SET(UPLOAD_URL "${UPLOAD_URL}:${${varPrefix}_REMOTE_DIR}") ++ ENDIF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "") ++ ++ ADD_CUSTOM_TARGET(${_target} ++ COMMAND ${${varPrefix}_UPLOAD_CMD} ${${varPrefix}_UPLOAD_OPTIONS} ${ARGN} ${UPLOAD_URL} ++ DEPENDS ${${varPrefix}_UPLOAD_FILES} ${${varPrefix}_DEPENDS} ++ ${_DEPENDS} ++ COMMENT "${${varPrefix}_HOST_ALIAS} uploading ${fileAlias}." ++ VERBATIM ++ ) ++ ENDMACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias) ++ ++ FUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias) ++ FIND_PROGRAM(UPLOAD_CMD "${cmd}") ++ IF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with ${cmd} disabled.") ++ ELSE(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "upload_${fileAlias}" ${ARGN}) ++ SET(upload_UPLOAD_CMD ${UPLOAD_CMD}) ++ MANAGE_UPLOAD_MAKE_TAGET("upload" "${fileAlias}") ++ ENDIF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") ++ ENDFUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias) ++ ++ FUNCTION(MANAGE_UPLOAD_SFTP fileAlias) ++ MANAGE_UPLOAD_CMD(sftp ${fileAlias} ${ARGN}) ++ ENDFUNCTION(MANAGE_UPLOAD_SFTP fileAlias) ++ ++ FUNCTION(MANAGE_UPLOAD_SCP fileAlias) ++ MANAGE_UPLOAD_CMD(scp ${fileAlias} ${ARGN}) ++ ENDFUNCTION(MANAGE_UPLOAD_SCP fileAlias) ++ ++ #MACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD) ++ # FIND_PROGRAM(CURL_CMD curl) ++ # IF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND") ++ # MESSAGE(FATAL_ERROR "Need curl to perform google upload") ++ # ENDIF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND") ++ #ENDMACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD) ++ FUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias) ++ FIND_PROGRAM(fedorahosted_${fileAlias}_UPLOAD_CMD "scp") ++ IF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with fedorahost disabled.") ++ ELSE(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "fedorahosted_${fileAlias}" HOST_ALIAS "fedorahosted" ++ HOST_URL "fedorahosted.org" REMOTE_DIR "${PROJECT_NAME}" ${ARGN}) ++ MANAGE_UPLOAD_MAKE_TARGET("fedorahosted_${fileAlias}" "${fileAlias}" ${fedorahosted_${fileAlias}_UPLOAD_FILES}) ++ ENDIF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") ++ ENDFUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias) ++ ++ FUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias) ++ FIND_PROGRAM(sourceforge_${fileAlias}_UPLOAD_CMD "sftp") ++ IF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with sourceforge disabled.") ++ ELSE(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "sourceforge_${fileAlias}" ${ARGN} HOST_ALIAS "sourceforge" ++ HOST_URL "frs.sourceforge.net") ++ IF(sourceforge_${fileAlias}_USER) ++ SET(sourceforge_${fileAlias}_REMOTE_DIR "/home/frs/project/${PROJECT_NAME}") ++ ENDIF(sourceforge_${fileAlias}_USER) ++ SET("sourceforge_${fileAlias}_UPLOAD_CMD" "sftp") ++ MANAGE_UPLOAD_MAKE_TARGET("sourceforge_${fileAlias}" "${fileAlias}") ++ ENDIF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") ++ ENDFUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias) ++ENDIF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageVariable.cmake +@@ -0,0 +1,326 @@ ++# - Get or set variables from various sources. ++# ++# Includes: ++# ManageString ++# ++# Included by: ++# ManageVersion ++# PackRPM ++# ++# Defines following functions: ++# SETTING_STRING_GET_VARIABLE(var value str [NOUNQUOTE] [NOREPLACE] [setting_sign]) ++# - Get a variable and a value from a setting in string format. ++# i.e. VAR=Value ++# pattern. '#' is used for comment. ++# * Parameters: ++# + var: Variable name extracted from str. ++# + value: Value extracted from str ++# + str: String to be extracted variable and value from. ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. ++# + NOREPLACE (Optional) Without this parameter, this macro replaces ++# previous defined variables, use NOREPLACE to prevent this. ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. ++# Default value: "=" ++# ++# Defines following macros: ++# COMMAND_OUTPUT_TO_VARIABLE(var cmd) ++# - Store command output to a variable, without new line characters (\n and \r). ++# This macro is suitable for command that output one line result. ++# Note that the var will be set to ${var_name}-NOVALUE if cmd does not have ++# any output. ++# * Parameters: ++# var: A variable that stores the result. ++# cmd: A command. ++# ++# SETTING_FILE_GET_VARIABLES_PATTERN(var attr_pattern setting_file [NOUNQUOTE] [NOREPLACE] ++# [NOESCAPE_SEMICOLON] [setting_sign]) ++# - Get variable values from a setting file if their names matches given ++# pattern. '#' is used for comment. ++# * Parameters: ++# + var: Variable to store the attribute value. ++# Set to "" to set attribute under matched variable name. ++# + attr_pattern: Regex pattern of variable name. ++# + setting_file: Setting filename. ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. ++# + NOREPLACE (Optional) Without this parameter, this macro replaces ++# previous defined variables, use NOREPLACE to prevent this. ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. ++# Default value: "=" ++# ++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE] ++# [NOESCAPE_SEMICOLON] [setting_sign]) ++# - Get all variable values from a setting file. ++# It is equivalent to: ++# SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_]*" ++# "${setting_file}" ${ARGN}) ++# '#' is used to comment out setting. ++# * Parameters: ++# + setting_file: Setting filename. ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. ++# + NOREPLACE (Optional) Without this parameter, this macro replaces ++# previous defined variables, use NOREPLACE to prevent this. ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. ++# Default value: "=" ++# ++# SETTING_FILE_GET_VARIABLE(var attr_name setting_file [NOUNQUOTE] [NOREPLACE] ++# [NOESCAPE_SEMICOLON] [setting_sign]) ++# - Get a variable value from a setting file. ++# It is equivalent to: ++# SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}" ++# "${setting_file}" ${ARGN}) ++# '#' is used to comment out setting. ++# * Parameters: ++# + var: Variable to store the attribute value. ++# + attr_name: Name of the variable. ++# + setting_file: Setting filename. ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. ++# + NOREPLACE (Optional) Without this parameter, this macro replaces ++# previous defined variables, use NOREPLACE to prevent this. ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. ++# Default value: "=" ++# ++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE] ++# [NOESCAPE_SEMICOLON] [setting_sign]) ++# - Get all attribute values from a setting file. ++# '#' is used to comment out setting. ++# * Parameters: ++# + setting_file: Setting filename. ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. ++# + NOREPLACE (Optional) Without this parameter, this macro replaces ++# previous defined variables, use NOREPLACE to prevent this. ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. ++# Default value: "=" ++# ++# GET_ENV(var default_value [env]) ++# - Get the value of a environment variable, or use default ++# if the environment variable does not exist or is empty. ++# * Parameters: ++# var: Variable to be set ++# default_value: Default value of the var ++# env: (Optional) The name of environment variable. Only need if different from var. ++# ++# SET_VAR(var untrimmed_value) ++# - Trim an set the value to a variable. ++# * Parameters: ++# var: Variable to be set ++# untrimmed_value: Untrimmed values that may have space, \t, \n, \r in the front or back of the string. ++# ++ ++IF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_) ++ SET(_MANAGE_VARIABLE_CMAKE_ "DEFINED") ++ INCLUDE(ManageString) ++ ++ MACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd) ++ EXECUTE_PROCESS( ++ COMMAND ${cmd} ${ARGN} ++ OUTPUT_VARIABLE _cmd_output ++ OUTPUT_STRIP_TRAILING_WHITESPACE ++ ) ++ IF(_cmd_output) ++ SET(${var} ${_cmd_output}) ++ ELSE(_cmd_output) ++ SET(var "${var}-NOVALUE") ++ ENDIF(_cmd_output) ++ #SET(value ${${var}}) ++ #MESSAGE("var=${var} _cmd_output=${_cmd_output} value=|${value}|" ) ++ ENDMACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd) ++ ++ # This macro is meant to be internal. ++ MACRO(_MANAGE_VARIABLE_SET var value) ++ SET(${var} "${value}") ++ ENDMACRO(_MANAGE_VARIABLE_SET var value) ++ ++ # it deals the "encoded" line. ++ FUNCTION(SETTING_STRING_GET_VARIABLE var value str ) ++ SET(setting_sign "=") ++ SET(_NOUNQUOTE "") ++ SET(_NOREPLACE "") ++ FOREACH(_arg ${ARGN}) ++ IF (${_arg} STREQUAL "NOUNQUOTE") ++ SET(_NOUNQUOTE "NOUNQUOTE") ++ ELSEIF (${_arg} STREQUAL "NOREPLACE") ++ SET(_NOREPLACE "NOREPLACE") ++ ELSE(${_arg} STREQUAL "NOUNQUOTE") ++ SET(setting_sign ${_arg}) ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") ++ ENDFOREACH(_arg ${ARGN}) ++ ++ STRING_SPLIT(_tokens "${setting_sign}" "${str}" 2) ++ #MESSAGE("_tokens=${_tokens}") ++ SET(_varName "") ++ SET(_val "") ++ FOREACH(_token ${_tokens}) ++ #MESSAGE("_varName=${_varName} _token=${_token}") ++ IF(_varName STREQUAL "") ++ SET(_varName "${_token}") ++ ELSE(_varName STREQUAL "") ++ SET(_val "${_token}") ++ ENDIF(_varName STREQUAL "") ++ ENDFOREACH(_token ${_tokens}) ++ #MESSAGE("_varName=${_varName} _val=${_val}") ++ ++ SET(${var} "${_varName}" PARENT_SCOPE) ++ # Set var when ++ # 1. NOREPLACE is not set, or ++ # 2. var has value already. ++ SET(_setVar 0) ++ IF(_NOREPLACE STREQUAL "") ++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE}) ++ ELSEIF(${var} STREQUAL "") ++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE}) ++ ELSE(_NOREPLACE STREQUAL "") ++ SET(_value "${${var}}") ++ ENDIF(_NOREPLACE STREQUAL "") ++ SET(${value} "${_value}" PARENT_SCOPE) ++ #MESSAGE("_varName=${_varName} _value=${_value}") ++ ++ ENDFUNCTION(SETTING_STRING_GET_VARIABLE var str) ++ ++ # Internal macro ++ # Similar to STRING_ESCAPE, but read directly from file, ++ # This avoid the variable substitution ++ # Variable escape is enforced. ++ MACRO(FILE_READ_ESCAPE var filename) ++ # '$' is very tricky. ++ # '$' => '#D' ++ GET_FILENAME_COMPONENT(_filename_abs "${filename}" ABSOLUTE) ++ EXECUTE_PROCESS(COMMAND cat ${filename} ++ COMMAND sed -e "s/#/#H/g" ++ COMMAND sed -e "s/[$]/#D/g" ++ COMMAND sed -e "s/;/#S/g" ++ COMMAND sed -e "s/[\\]/#B/g" ++ OUTPUT_VARIABLE _ret ++ OUTPUT_STRIP_TRAILING_WHITESPACE) ++ ++ STRING(REGEX REPLACE "\n" ";" _ret "${_ret}") ++ #MESSAGE("_ret=|${_ret}|") ++ SET(${var} "${_ret}") ++ ENDMACRO(FILE_READ_ESCAPE var filename) ++ ++ MACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file) ++ IF("${setting_file}" STREQUAL "") ++ M_MSG(${M_FATAL} "SETTING_FILE_GET_VARIABLES_PATTERN: setting_file ${setting_file} is empty") ++ ENDIF("${setting_file}" STREQUAL "") ++ SET(setting_sign "=") ++ SET(_noUnQuoted "") ++ SET(_noEscapeSemicolon "") ++ SET(_noReplace "") ++ SET(_escapeVariable "") ++ FOREACH(_arg ${ARGN}) ++ IF (${_arg} STREQUAL "NOUNQUOTE") ++ SET(_noUnQuoted "NOUNQUOTE") ++ ELSEIF (${_arg} STREQUAL "NOREPLACE") ++ SET(_noReplace "NOREPLACE") ++ ELSEIF (${_arg} STREQUAL "NOESCAPE_SEMICOLON") ++ SET(_noEscapeSemicolon "NOESCAPE_SEMICOLON") ++ ELSEIF (${_arg} STREQUAL "ESCAPE_VARIABLE") ++ SET(_escapeVariable "ESCAPE_VARIABLE") ++ ELSE(${_arg} STREQUAL "NOUNQUOTE") ++ SET(setting_sign ${_arg}) ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") ++ ENDFOREACH(_arg) ++ ++ # Escape everything to be safe. ++ FILE_READ_ESCAPE(_lines "${setting_file}") ++ ++ #STRING_SPLIT(_lines "\n" "${_txt_content}") ++ #MESSAGE("_lines=|${_lines}|") ++ SET(_actual_line "") ++ SET(_join_next 0) ++ FOREACH(_line ${_lines}) ++ #MESSAGE("_line=|${_line}|") ++ IF(NOT _line MATCHES "^[ \\t]*#H") ++ # Not a comment line. ++ IF(_join_next EQUAL 1) ++ SET(_actual_line "${_actual_line}${_line}" ) ++ ELSE(_join_next EQUAL 1) ++ SET(_actual_line "${_line}") ++ ENDIF(_join_next EQUAL 1) ++ #MESSAGE("_actual_line=|${_actual_line}|") ++ ++ IF(_actual_line MATCHES "#B$") ++ #Join the lines that end with \\ ++ SET(_join_next 1) ++ STRING(REGEX REPLACE "#B$" "" _actual_line "${_actual_line}") ++ ELSE(_actual_line MATCHES "#B$") ++ SET(_join_next 0) ++ IF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}") ++ #MESSAGE("*** matched_line=|${_actual_line}|") ++ SETTING_STRING_GET_VARIABLE(_attr _value ++ "${_actual_line}" ${setting_sign} ${_noUnQuoted} ) ++ #MESSAGE("*** _attr=${_attr} _value=${_value}") ++ IF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr}) ++ # Unencoding ++ _STRING_UNESCAPE(_value "${_value}" ${_noEscapeSemicolon} ESCAPE_VARIABLE) ++ IF(_escapeVariable STREQUAL "") ++ # Variable should not be escaped ++ # i.e. need substitution ++ _MANAGE_VARIABLE_SET(_value "${_value}") ++ ENDIF(_escapeVariable STREQUAL "") ++ IF("${var}" STREQUAL "") ++ SET(${_attr} "${_value}") ++ ELSE("${var}" STREQUAL "") ++ SET(${var} "${_value}") ++ ENDIF("${var}" STREQUAL "") ++ ENDIF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr}) ++ ENDIF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}") ++ ++ ENDIF(_actual_line MATCHES "#B$") ++ ++ ENDIF(NOT _line MATCHES "^[ \\t]*#H") ++ ENDFOREACH(_line ${_lines}) ++ #SET(${var} "${_value}") ++ ++ ENDMACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file) ++ ++ MACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file) ++ SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}" ++ "${setting_file}" ${ARGN}) ++ ENDMACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file) ++ ++ MACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file) ++ SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_.]*" ++ "${setting_file}" ${ARGN}) ++ ENDMACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file) ++ ++ MACRO(GET_ENV var default_value) ++ IF(${ARGC} GREATER 2) ++ SET(_env "${ARGV2}") ++ ELSE(${ARGC} GREATER 2) ++ SET(_env "${var}") ++ ENDIF(${ARGC} GREATER 2) ++ ++ IF ("$ENV{${_env}}" STREQUAL "") ++ SET(${var} "${default_value}") ++ ELSE("$ENV{${_env}}" STREQUAL "") ++ SET(${var} "$ENV{${_env}}") ++ ENDIF("$ENV{${_env}}" STREQUAL "") ++ # MESSAGE("Variable ${var}=${${var}}") ++ ENDMACRO(GET_ENV var default_value) ++ ++ MACRO(SET_VAR var untrimmedValue) ++ SET(_noUnQuoted "") ++ FOREACH(_arg ${ARGN}) ++ IF (${_arg} STREQUAL "NOUNQUOTE") ++ SET(_noUnQuoted "NOUNQUOTE") ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") ++ ENDFOREACH(_arg ${ARGN}) ++ #MESSAGE("untrimmedValue=${untrimmedValue}") ++ IF ("${untrimmedValue}" STREQUAL "") ++ SET(${var} "") ++ ELSE("${untrimmedValue}" STREQUAL "") ++ STRING_TRIM(trimmedValue "${untrimmedValue}" ${_noUnQuoted}) ++ #MESSAGE("***SET_VAR: trimmedValue=${trimmedValue}") ++ SET(${var} "${trimmedValue}") ++ ENDIF("${untrimmedValue}" STREQUAL "") ++ #SET(value "${${var}}") ++ #MESSAGE("***SET_VAR: ${var}=|${value}|") ++ ENDMACRO(SET_VAR var untrimmedValue) ++ ++ENDIF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_) ++ +--- /dev/null ++++ b/Modules/ManageVersion.cmake +@@ -0,0 +1,137 @@ ++# - Modules for manipulate version and ChangeLogs ++# ++# Includes: ++# ManageVariable ++# DateTimeFormat ++# ++# Included by: ++# PackSource ++# ++# Defines following functions: ++# RELEASE_NOTES_READ_FILE([releaseFile]) ++# - Load release file information. ++# Arguments: ++# + releaseFile: (Optional) release file to be read. ++# This file should contain following definition: ++# + PRJ_VER: Release version. ++# + SUMMARY: Summary of the release. Will be output as CHANGE_SUMMARY. ++# and a [Changes] section tag, below which listed the change in the ++# release. ++# Default:RELEASE-NOTES.txt ++# This macro reads or define following variables: ++# + RELEASE_TARGETS: Sequence of release targets. ++# This macro outputs following files: ++# + ChangeLog: Log of changes. ++# Depends on ChangeLog.prev and releaseFile. ++# This macro sets following variables: ++# + PRJ_VER: Release version. ++# + CHANGE_SUMMARY: Summary of changes. ++# + CHANGELOG_ITEMS: Lines below the [Changes] tag. ++# + RELEASE_NOTES_FILE: The loaded release file. ++# + PRJ_DOC_DIR: Documentation for the project. ++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER} ++# ++# ++ ++IF(NOT DEFINED _MANAGE_VERSION_CMAKE_) ++ SET(_MANAGE_VERSION_CMAKE_ "DEFINED") ++ INCLUDE(ManageMessage) ++ INCLUDE(ManageVariable) ++ ++ SET(CHANGELOG_FILE "${CMAKE_BINARY_DIR}/ChangeLog" CACHE FILEPATH ++ "ChangeLog") ++ SET(CHANGELOG_PREV_FILE "${CMAKE_SOURCE_DIR}/ChangeLog.prev" CACHE FILEPATH ++ "ChangeLog.prev") ++ ++ ADD_CUSTOM_TARGET(changelog_prev_update ++ COMMAND ${CMAKE_COMMAND} -E copy ${CHANGELOG_FILE} ${CHANGELOG_PREV_FILE} ++ DEPENDS ${CHANGELOG_FILE} ++ COMMENT "${CHANGELOG_FILE} are saving as ${CHANGELOG_PREV_FILE}" ++ ) ++ ++ FUNCTION(RELEASE_NOTES_READ_FILE) ++ FOREACH(_arg ${ARGN}) ++ IF(EXISTS ${_arg}) ++ SET(RELEASE_NOTES_FILE ${_arg} CACHE FILEPATH "Release File") ++ ENDIF(EXISTS ${_arg}) ++ ENDFOREACH(_arg ${ARGN}) ++ ++ IF(NOT RELEASE_NOTES_FILE) ++ SET(RELEASE_NOTES_FILE "RELEASE-NOTES.txt" CACHE FILEPATH "Release Notes") ++ ENDIF(NOT RELEASE_NOTES_FILE) ++ ++ FILE(STRINGS "${RELEASE_NOTES_FILE}" _release_lines) ++ ++ SET(_changeItemSection 0) ++ SET(_changeItems "") ++ ## Parse release file ++ FOREACH(_line ${_release_lines}) ++ IF(_changeItemSection) ++ ### Append lines in change section ++ IF(_changeItems) ++ SET(_changeItems "${_changeItems}\n${_line}") ++ ELSE(_changeItems) ++ SET(_changeItems "${_line}") ++ ENDIF(_changeItems) ++ ELSEIF("${_line}" MATCHES "^[[]Changes[]]") ++ ### Start the change section ++ SET(_changeItemSection 1) ++ ELSE(_changeItemSection) ++ ### Variable Setting section ++ SETTING_STRING_GET_VARIABLE(var value "${_line}") ++ #MESSAGE("var=${var} value=${value}") ++ IF(NOT var MATCHES "#") ++ IF(var STREQUAL "PRJ_VER") ++ SET_COMPILE_ENV(${var} "${value}" CACHE STRING "Project Version" FORCE) ++ ELSEIF(var STREQUAL "SUMMARY") ++ SET(CHANGE_SUMMARY "${value}" CACHE STRING "Change Summary" FORCE) ++ ELSE(var STREQUAL "PRJ_VER") ++ SET(${var} "${value}" CACHE STRING "${var}" FORCE) ++ ENDIF(var STREQUAL "PRJ_VER") ++ ENDIF(NOT var MATCHES "#") ++ ENDIF(_changeItemSection) ++ ENDFOREACH(_line ${_release_line}) ++ ++ IF(_changeSection EQUAL 0) ++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have a [Changes] tag!") ++ ELSEIF("${_changeItems}" STREQUAL "") ++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have ChangeLog items!") ++ ENDIF(_changeSection EQUAL 0) ++ ++ FILE(WRITE "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" "${_changeItems}") ++ ++ SET_COMPILE_ENV(PRJ_DOC_DIR "${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER}" ++ CACHE PATH "Project docdir prefix" FORCE) ++ ++ CHANGELOG_WRITE_FILE() ++ ENDFUNCTION(RELEASE_NOTES_READ_FILE) ++ ++ FUNCTION(CHANGELOG_WRITE_FILE) ++ INCLUDE(DateTimeFormat) ++ ++ FILE(WRITE ${CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}\n") ++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" _changeLog_items) ++ ++ FILE(APPEND ${CHANGELOG_FILE} "${_changeLog_items}\n\n") ++ FILE(READ ${CHANGELOG_PREV_FILE} CHANGELOG_PREV) ++ FILE(APPEND ${CHANGELOG_FILE} "${CHANGELOG_PREV}") ++ SET(CMAKE_CACHE_TXT "${CMAKE_BINARY_DIR}/CMakeCache.txt") ++ ++ ADD_CUSTOM_COMMAND(OUTPUT ${CHANGELOG_FILE} ++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR} ++ DEPENDS ${RELEASE_NOTES_FILE} ${CHANGELOG_PREV_FILE} ++ COMMENT "Building ${CHANGELOG_FILE}" ++ VERBATIM ++ ) ++ ++ ADD_CUSTOM_TARGET(changelog ALL ++ DEPENDS ${CHANGELOG_FILE} ++ VERBATIM ++ ) ++ ++ ENDFUNCTION(CHANGELOG_WRITE_FILE) ++ ++ ++ ++ENDIF(NOT DEFINED _MANAGE_VERSION_CMAKE_) ++ +--- /dev/null ++++ b/Modules/cmake_uninstall.cmake.in +@@ -0,0 +1,21 @@ ++IF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") ++ MESSAGE(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt\"") ++ENDIF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") ++ ++FILE(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files) ++STRING(REGEX REPLACE "\n" ";" files "${files}") ++FOREACH(file ${files}) ++ MESSAGE(STATUS "Uninstalling \"$ENV{DESTDIR}${file}\"") ++ IF(EXISTS "$ENV{DESTDIR}${file}") ++ EXEC_PROGRAM( ++ "@CMAKE_COMMAND@" ARGS "-E remove \"$ENV{DESTDIR}${file}\"" ++ OUTPUT_VARIABLE rm_out ++ RETURN_VALUE rm_retval ++ ) ++ IF(NOT "${rm_retval}" STREQUAL 0) ++ MESSAGE(FATAL_ERROR "Problem when removing \"$ENV{DESTDIR}${file}\"") ++ ENDIF(NOT "${rm_retval}" STREQUAL 0) ++ ELSE(EXISTS "$ENV{DESTDIR}${file}") ++ MESSAGE(STATUS "File \"$ENV{DESTDIR}${file}\" does not exist.") ++ ENDIF(EXISTS "$ENV{DESTDIR}${file}") ++ENDFOREACH(file) diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch new file mode 100644 index 000000000..27c585847 --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch @@ -0,0 +1,58 @@ +--- /dev/null ++++ b/ChangeLog.prev +@@ -0,0 +1,55 @@ ++* Mon Nov 26 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.5 ++- Table build scripts has been refactored. ++- cmake-fedora is added as submodule. ++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by ++ merging maxiaojun's repository ++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files ++- Fixed Google issue 1507: Add CJKV Extension C/D support for Array30 ++- Merge GitHub Pull request 3: Added the inter punct ++- Merge GitHub Pull request 4: Give Cangjie and Quick users 9 candidates per page ++ ++* Fri Sep 07 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.0 ++- Table build scripts has been refactored. ++- cmake-fedora is added as submodule. ++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by ++ merging maxiaojun's repository ++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files ++ ++* Fri Oct 28 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.5 ++- Merge Caius Chance's branch for DYNAMIC_ADJUST ++- Dependency update to cmake-0.8.1 ++ ++* Wed Aug 31 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.4 ++- Fixed Bug 715707 - FTBFS ibus-table-chinese-1.3.0.20110114-2.fc15 ++- Fixed Bug 629212 - bad candidate orders in ibus-table-quick ++- Merged patch from sagara @ github, which address IBus issue 787 ++- Make it compatible with cmake-fedora-0.7.994 ++- Move the cmake policies to the front ++- Suppress the misleading warning from rpm -V ++ ++* Fri Jan 14 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20110114 ++- Fix Bug 667877: ibus-table-yinma and ibus-table-xingma have been obsoleted. ++- Now depends on cmake-fedora ++ ++* Mon Dec 06 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101206 ++- New tables which was not include in original: ++ + array30, array30-big, wubi-haifeng ++- Table removed from original version because of license issues: ++ + zhengma, ziranma ++- Add package review ID ++- Add build tag for el6 ++ ++* Fri Dec 03 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101201 ++- Support out-of-source build ++- Remove ibus-table-chinese-all ++ ++* Wed Jan 06 2010 Caius 'kaio' Chance <k at kaio.me> - 1.3.0.20100527 ++- Added Quick 3, 5, Classic tables and icons. ++- Added Easy (big) table and icon. ++- Updated AUTHORS, COPYING, license and its declarations. ++- Added CangJie (big) table. ++ ++* Wed Aug 19 2008 Yu Yuwei <acevery@gmail.com> - 1.3.0.20100527 ++- The first version. ++ ++ diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch new file mode 100644 index 000000000..0f814b765 --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch @@ -0,0 +1,130 @@ +diff -u -r ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt new/tables/array/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt 2018-10-30 01:56:21.474548447 +0100 ++++ new/tables/array/CMakeLists.txt 2018-10-29 23:39:57.770116668 +0100 +@@ -16,7 +16,7 @@ + + CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BASE_HEAD} @ONLY) + +-CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 array30_27489.txt) ++CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_27489.txt) + GENERATE_FREQ(${ARRAY30_BASE_FREQ} + ${ARRAY30_BASE_UTF8} + ) +@@ -41,10 +41,10 @@ + CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BIG_HEAD} @ONLY) + + SET(ARRAY30_EXT_B_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8) +-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 array30_ExtB.txt) ++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtB.txt) + + SET(ARRAY30_EXT_CD_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8) +-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 array30_ExtCD_V2012A.txt) ++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtCD_V2012A.txt) + + ADD_CUSTOM_COMMAND(OUTPUT ${ARRAY30_BIG_UTF8} + COMMAND cat ${ARRAY30_BASE_UTF8} +Only in new/tables/array: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt new/tables/cangjie/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt 2018-10-30 01:56:50.506773198 +0100 ++++ new/tables/cangjie/CMakeLists.txt 2018-10-30 00:15:41.319903050 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(cangjie "cangjie3.txt" "cangjie5.txt" "cangjie-big.txt") ++CONVERT_DB(cangjie "${CMAKE_CURRENT_SOURCE_DIR}/cangjie3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie-big.txt") + +Only in new/tables/cangjie: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt new/tables/cantonese/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt 2018-10-30 01:56:29.464408649 +0100 ++++ new/tables/cantonese/CMakeLists.txt 2018-10-30 00:05:51.026038238 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(cantonese "cantonese.txt" "cantonhk.txt" "jyutping.txt") ++CONVERT_DB(cantonese "${CMAKE_CURRENT_SOURCE_DIR}/cantonese.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cantonhk.txt" "${CMAKE_CURRENT_SOURCE_DIR}/jyutping.txt") + +Only in new/tables/cantonese: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/CMakeLists.txt new/tables/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/CMakeLists.txt 2018-10-30 01:56:08.781947707 +0100 ++++ new/tables/CMakeLists.txt 2018-10-30 01:53:51.086824367 +0100 +@@ -87,7 +87,7 @@ + DEPENDS ${_tabFile} + COMMENT "Building ${_tabName} table" + ) +- LIST(APPEND _dependDb "${_dbF}") ++ LIST(APPEND _dependDb "${CMAKE_CURRENT_BINARY_DIR}/${_dbF}") + IF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png") + LIST(APPEND _dependIcon "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png") + ELSEIF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.svg") +Only in new/tables: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt new/tables/easy/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt 2018-10-30 01:56:35.966667250 +0100 ++++ new/tables/easy/CMakeLists.txt 2018-10-30 00:07:49.806217968 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(easy "easy-big.txt") ++CONVERT_DB(easy "${CMAKE_CURRENT_SOURCE_DIR}/easy-big.txt") + +Only in new/tables/easy: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt new/tables/erbi/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt 2018-10-30 01:56:39.921608060 +0100 ++++ new/tables/erbi/CMakeLists.txt 2018-10-30 00:08:14.355641341 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(erbi "erbi.txt" "erbi-qs.txt") ++CONVERT_DB(erbi "${CMAKE_CURRENT_SOURCE_DIR}/erbi.txt" "${CMAKE_CURRENT_SOURCE_DIR}/erbi-qs.txt") + +Only in new/tables/erbi: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt new/tables/quick/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt 2018-10-30 01:56:43.592624907 +0100 ++++ new/tables/quick/CMakeLists.txt 2018-10-30 00:14:13.643389364 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(quick "quick3.txt" "quick5.txt" "quick-classic.txt") ++CONVERT_DB(quick "${CMAKE_CURRENT_SOURCE_DIR}/quick3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick-classic.txt") + +Only in new/tables/quick: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt new/tables/scj/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt 2018-10-30 01:56:47.079691021 +0100 ++++ new/tables/scj/CMakeLists.txt 2018-10-30 00:00:14.404215150 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(scj "scj6.txt") ++CONVERT_DB(scj "${CMAKE_CURRENT_SOURCE_DIR}/scj6.txt") + +Only in new/tables/scj: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt new/tables/stroke5/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt 2018-10-30 01:56:32.727534736 +0100 ++++ new/tables/stroke5/CMakeLists.txt 2018-10-30 00:07:28.132024331 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(stroke5 "stroke5.txt") ++CONVERT_DB(stroke5 "${CMAKE_CURRENT_SOURCE_DIR}/stroke5.txt") + +Only in new/tables/stroke5: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt new/tables/wu/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt 2018-10-30 01:56:53.921858589 +0100 ++++ new/tables/wu/CMakeLists.txt 2018-10-30 00:16:38.080698934 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(wu "wu.txt") ++CONVERT_DB(wu "${CMAKE_CURRENT_SOURCE_DIR}/wu.txt") + +Only in new/tables/wu: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt new/tables/wubi-haifeng/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt 2018-10-30 01:56:15.560132413 +0100 ++++ new/tables/wubi-haifeng/CMakeLists.txt 2018-10-29 23:30:12.746818405 +0100 +@@ -5,6 +5,6 @@ + # COMMENT "Building wubi-haifeng86.UTF-8" + # ) + +-MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt wubi-haifeng86.head wubi-haifeng86.UTF-8 wubi-haifeng86.tail) ++MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.head ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.UTF-8 ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.tail) + CONVERT_DB(wubi-haifeng "wubi-haifeng86.txt") + +Only in new/tables/wubi-haifeng: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt new/tables/wubi-jidian/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt 2018-10-30 01:56:25.921357528 +0100 ++++ new/tables/wubi-jidian/CMakeLists.txt 2018-10-30 00:01:13.876283460 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(wubi-jidian "wubi-jidian86.txt") ++CONVERT_DB(wubi-jidian "${CMAKE_CURRENT_SOURCE_DIR}/wubi-jidian86.txt") + +Only in new/tables/wubi-jidian: .CMakeLists.txt.swp +diff -u -r ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt new/tables/yong/CMakeLists.txt +--- ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt 2018-10-30 01:56:57.568881862 +0100 ++++ new/tables/yong/CMakeLists.txt 2018-10-30 00:17:30.326704114 +0100 +@@ -1,2 +1,2 @@ +-CONVERT_DB(yong "yong.txt") ++CONVERT_DB(yong "${CMAKE_CURRENT_SOURCE_DIR}/yong.txt") + diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb new file mode 100644 index 000000000..0c33e4f44 --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb @@ -0,0 +1,82 @@ +DESCRIPTION = "It is a Japanese input engine for IBus." +LICENSE = "GPLv3" +LIC_FILES_CHKSUM = "file://COPYING;md5=86bfc594f9971fb2797f5aea1a49d316" +SECTION = "inputmethods" + +SRC_URI = "https://github.com/definite/${PN}/archive/${PV}.tar.gz \ + file://0001-revert-CMakeLists.txt.patch \ + file://0002-add-Modules.patch \ + file://0003-add-ChangeLog.prev.patch \ + file://0005-fix-cmake-cross-compile.patch \ +" + +SRC_URI[md5sum] = "6360649580363bb3627a11e32057f6b1" +SRC_URI[sha256sum] = "ef62c22ef4e8f9085fc40fcbc14c30f6dac458817df98e9f90f883a3e2080089" + +inherit cmake + +DEPENDS = " ibus-table " + +BBCLASSEXTEND = "native" + +# The supported options are "Unix Makefiles" or "Ninja". +OECMAKE_GENERATOR = "Unix Makefiles" + +cmake_do_generate_toolchain_file() { + if [ "${BUILD_SYS}" = "${HOST_SYS}" ]; then + cmake_crosscompiling="set( CMAKE_CROSSCOMPILING FALSE )" + fi + cat > ${WORKDIR}/toolchain.cmake <<EOF +# CMake system name must be something like "Linux". +# This is important for cross-compiling. +$cmake_crosscompiling +set( CMAKE_SYSTEM_NAME `echo ${TARGET_OS} | sed -e 's/^./\u&/' -e +'s/^\(Linux\).*/\1/'` ) +set( CMAKE_SYSTEM_PROCESSOR +${@map_target_arch_to_uname_arch(d.getVar('TARGET_ARCH'))} ) +set( CMAKE_C_COMPILER ${OECMAKE_C_COMPILER} ) +set( CMAKE_CXX_COMPILER ${OECMAKE_CXX_COMPILER} ) +set( CMAKE_ASM_COMPILER ${OECMAKE_C_COMPILER} ) +set( CMAKE_AR ${OECMAKE_AR} CACHE FILEPATH "Archiver" ) +set( CMAKE_C_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "CFLAGS" ) +set( CMAKE_CXX_FLAGS "${OECMAKE_CXX_FLAGS}" CACHE STRING "CXXFLAGS" ) +set( CMAKE_ASM_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "ASM FLAGS" ) +set( CMAKE_C_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING +"Additional CFLAGS for release" ) +set( CMAKE_CXX_FLAGS_RELEASE "${OECMAKE_CXX_FLAGS_RELEASE}" CACHE STRING +"Additional CXXFLAGS for release" ) +set( CMAKE_ASM_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING +"Additional ASM FLAGS for release" ) +set( CMAKE_C_LINK_FLAGS "${OECMAKE_C_LINK_FLAGS}" CACHE STRING "LDFLAGS" ) +set( CMAKE_CXX_LINK_FLAGS "${OECMAKE_CXX_LINK_FLAGS}" CACHE STRING "LDFLAGS" ) + +# only search in the paths provided so cmake doesnt pick +# up libraries and tools from the native build machine +set( CMAKE_FIND_ROOT_PATH ${STAGING_DIR_HOST} ${STAGING_DIR_NATIVE} +${CROSS_DIR} ${OECMAKE_PERLNATIVE_DIR} ${OECMAKE_EXTRA_ROOT_PATH} +${EXTERNAL_TOOLCHAIN}) +set( CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY ) +# set( CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ${OECMAKE_FIND_ROOT_PATH_MODE_PROGRAM} ) +set( CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY ) +# set( CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY ) + +# Use qt.conf settings +set( ENV{QT_CONF_PATH} ${WORKDIR}/qt.conf ) + +# We need to set the rpath to the correct directory as cmake does not provide +# any +# directory as rpath by default +set( CMAKE_INSTALL_RPATH ${OECMAKE_RPATH} ) + +# Use native cmake modules +list(APPEND CMAKE_MODULE_PATH "${STAGING_DATADIR}/cmake/Modules/") + +# add for non /usr/lib libdir, e.g. /usr/lib64 +set( CMAKE_LIBRARY_PATH ${libdir} ${base_libdir}) + +EOF +} + +FILES_${PN} += "${datadir}/ibus-table/icons/* \ + ${datadir}/ibus-table/tables/* \ +" -- 2.11.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [meta-openembedded][PATCH v5 6/7] ibus-table-chinese: add ibus-table-chinese recipe 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 6/7] ibus-table-chinese: add ibus-table-chinese recipe Pablo Saavedra @ 2019-07-25 14:01 ` Khem Raj 2019-07-25 14:18 ` Khem Raj 0 siblings, 1 reply; 11+ messages in thread From: Khem Raj @ 2019-07-25 14:01 UTC (permalink / raw) To: Pablo Saavedra; +Cc: openembeded-devel this fails -- Checking for module 'ibus-table>=1.2' -- Found ibus-table, version 1.9.21 CMake Error at tables/CMakeLists.txt:3 (MESSAGE): ibus-table-createdb is not installed On Wed, Jul 24, 2019 at 7:59 AM Pablo Saavedra <psaavedra@igalia.com> wrote: > > Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> > --- > .../0001-revert-CMakeLists.txt.patch | 204 ++ > .../ibus/ibus-table-chinese/0002-add-Modules.patch | 2933 ++++++++++++++++++++ > .../0003-add-ChangeLog.prev.patch | 58 + > .../0005-fix-cmake-cross-compile.patch | 130 + > .../ibus/ibus-table-chinese_1.8.2.bb | 82 + > 5 files changed, 3407 insertions(+) > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb > > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch > new file mode 100644 > index 000000000..d677dc49a > --- /dev/null > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch > @@ -0,0 +1,204 @@ > +--- a/CMakeLists.txt > ++++ b/CMakeLists.txt > +@@ -1,17 +1,20 @@ > + cmake_minimum_required(VERSION 2.6.2) > + > +-# Included scripts do automatic cmake_policy PUSH and POP. > +-# OLD: CMake policy in included script will affect the invoker. > +-# CMAKE_POLICY(SET CMP0011 OLD) > ++# CMP0011 should be set here, otherwise policy set in module won't affect > ++# here. > ++CMAKE_POLICY(SET CMP0011 OLD) > + > + # Default CMAKE_INSTALL_PREFIX should be set before PROJECT() > + SET(CMAKE_INSTALL_PREFIX "/usr" CACHE PATH "Install dir prefix") > + > + # Whether to build on fedora > +-SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "1" CACHE STRING "Enable fedora build") > ++SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "0" CACHE STRING "Enable fedora build") > + > +-# Message level INFO1 (5) > +-SET(MANAGE_MESSAGE_LEVEL 5 CACHE STRING "Message (Verbose) Level") > ++# Message level M_OFF (4) > ++SET(MANAGE_MESSAGE_LEVEL 4 CACHE STRING "Message (Verbose) Level") > ++ > ++# Default support Gnome shell > ++SET(GNOME_SHELL 1) > + > + #################################################################### > + # Project specific information > +@@ -19,34 +22,20 @@ > + PROJECT(ibus-table-chinese NONE) > + SET(PRJ_SUMMARY "Chinese input tables for IBus") > + > +-SET(SUMMARY_TRANSLATIONS > +- "zh_CN" "中文码表输入法" > +- "zh_TW" "中文碼表輸入法" > +- ) > +- > + SET(PRJ_DESCRIPTION > + "ibus-table-chinese is provides the infrastructure for Chinese input methods. > + Input tables themselves are in subpackages." > + ) > + > +-SET(DESCRIPTION_TRANSLATIONS > +- "zh_TW" "ibus-table-chinese 提供了中文碼表輸入法的基礎架構。 > +- 輸入法本身則在子套件裡。" > +- ) > +- > + SET(AUTHORS "Yuwei Yu, Caius 'kaio' Chance, Ding-Yi Chen") > + SET(MAINTAINER "Ding-Yi Chen <dchen@redhat.com>") > + SET(VENDOR "Red Hat, Inc") > + SET(LICENSE "GPLv3+") > +-SET(PRJ_GROUP "System Environment/Libraries") > +-SET(BUILD_ARCH "noarch") > +-SET(RPM_SPEC_URL "http://code.google.com/p/ibus/") > +-SET(RPM_SPEC_SOURCES "https://fedorahosted.org/releases/c/m/%{name}/%{name}-%{version}-Source.tar.gz") > + > + #################################################################### > + # Includes > + # > +-LIST(INSERT CMAKE_MODULE_PATH 0 ${CMAKE_SOURCE_DIR}/Modules) > ++SET(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/Modules ${CMAKE_ROOT}/Modules ) > + > + # Create a link if Modules/ does not exists > + IF(EXISTS ${CMAKE_SOURCE_DIR}/cmake-fedora/Modules) > +@@ -63,6 +52,7 @@ > + SET(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Library dir") > + ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") > + SET(LIBEXEC_DIR "${LIB_DIR}" CACHE PATH "LIBEXEC dir") > ++ MESSAGE("*Hi") > + ENDIF(NOT CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > + > + INCLUDE(ManageEnvironment RESULT_VARIABLE MANAGE_ENVIRONMENT_PATH) > +@@ -77,56 +67,82 @@ > + > + INCLUDE(ManageVersion) > + RELEASE_NOTES_READ_FILE() > +-INCLUDE(ManageArchive) > +-INCLUDE(ManageFile) > +-INCLUDE(ManageSourceVersionControl) > +-INCLUDE(ManageTarget) > +-INCLUDE(ManageTranslation) > + INCLUDE(ManageUninstall) > +-ENABLE_TESTING() > + > + #################################################################### > +-# Dependencies > ++# Required > + # > + > +-INCLUDE(ManageDependency) > +-## Requires > +-MANAGE_DEPENDENCY(REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED) > +- > +-## Build Requires > +-MANAGE_DEPENDENCY(BUILD_REQUIRES CMAKE VER "2.6.2" REQUIRED) > +-MANAGE_DEPENDENCY(BUILD_REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED DEVEL) > +-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} REQUIRES) > +-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} BUILD_REQUIRES) > ++FIND_PACKAGE(PkgConfig) > ++PKG_CHECK_MODULES(IBUS_TABLE REQUIRED ibus-table>=1.2) > + > + #################################################################### > + # Building > + # > ++ > + ADD_SUBDIRECTORY(tables) > + > + #################################################################### > + # Installing > + # > + > +-MANAGE_SOURCE_VERSION_CONTROL_GIT() > ++# Install docs > ++# Note: Need to use filename only, otherwise > ++# ${CMAKE_SOURCE_DIR}/RELEASE-NOTES.txt will be deleted in spec > ++# > ++ > ++GET_FILENAME_COMPONENT(_releaseFileName "${RELEASE_FILE}" NAME) > ++SET(INSTALL_DOCS ${_releaseFileName} AUTHORS README ChangeLog COPYING README) > ++STRING_JOIN(PRJ_DOC_LIST " " ${INSTALL_DOCS}) > ++ > ++INSTALL(FILES ${INSTALL_DOCS} > ++ DESTINATION "${PRJ_DOC_DIR}") > + > +-INSTALL(FILES AUTHORS README ChangeLog COPYING DESTINATION ${PRJ_DOC_DIR}) > ++#################################################################### > ++# Source Version Control > ++# > ++INCLUDE(ManageSourceVersionControl) > ++MANAGE_SOURCE_VERSION_CONTROL_GIT() > + > + #################################################################### > + # Packing > + # > ++INCLUDE(ManageArchive) > + > +-## Pack Source > +-SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES CACHE PATH "Source Archive Dir") > +-PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}" > +- GITIGNORE ${CMAKE_SOURCE_DIR}/.gitignore > ++IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > ++ INCLUDE(ManageRPM) > ++ INCLUDE(ManageReleaseFedora) > ++ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > ++INCLUDE(ManageRelease) > ++ > ++SET(PRJ_IGNORE_FILES_COMMON > ++ "/doc/" "\\\\.spec$" "messages.po$" "\\\\.orig$" "/cmake-fedora/" > ++ "/\\\\.cache/" > ++ "\\\\.db$" > ++ ) > ++ > ++LIST(APPEND PRJ_IGNORE_FILES_COMMON > ++ "\\\\.utf8$" "\\\\.tmp$" "\\\\.freq$" "\\\\.tab$" > ++ "tables/array/.*\\\\.head$" > ++ "array30.txt" "array30-big.txt" "wubi-haifeng86.txt" > + ) > + > +-## Pack RPM > ++LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES > ++ ${PRJ_IGNORE_FILES_COMMON} "/bin/" "\\\\.xml$" "\\\\.schemas") > ++ > ++IF(RPM_BUILD_SOURCES) > ++ SET(SOURCE_ARCHIVE_DIR ${RPM_BUILD_SOURCES}) > ++ELSE(RPM_BUILD_SOURCES) > ++ SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES) > ++ENDIF(RPM_BUILD_SOURCES) > ++ > ++PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}") > + IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > +- SET(RPM_BUILD_SOURCES ${SOURCE_ARCHIVE_DIR}) > +- INCLUDE(ManageRPM) > +- PACK_RPM(SPEC_IN "SPECS/project.spec.in") > ++ PACK_RPM() > ++ RELEASE_FEDORA(fedora el6) > ++ # "Off" Warning is displayed if mock is not installed. > ++ RPM_MOCK_BUILD() > ++ MANAGE_RELEASE(release_fedora) > + ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > + > + #################################################################### > +@@ -142,20 +158,10 @@ > + #MANAGE_UPLOAD_CMD(scp src UPLOAD_FILES ${SOURCE_ARCHIVE_FILE}) > + #ADD_DEPENDENCIES(upload upload_src) > + > +-INCLUDE(ManageRelease) > +-IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > +- INCLUDE(ManageReleaseFedora) > +- RELEASE_FEDORA(fedora el6) > +- # "Off" Warning is displayed if mock is not installed. > +- MANAGE_RELEASE(tag_push release_fedora) > +-ELSE(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > +- MANAGE_RELEASE(tag_push) > +-ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > +- > +- > + #################################################################### > + # Test Suites. > + # > ++#ENABLE_TESTING() > + #ADD_TEST("Test" test_cmd1) > + > + > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch > new file mode 100644 > index 000000000..ffacda683 > --- /dev/null > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch > @@ -0,0 +1,2933 @@ > +--- /dev/null > ++++ b/Modules/DateTimeFormat.cmake > +@@ -0,0 +1,37 @@ > ++# - Date/time format module. > ++# > ++# Included by: > ++# ManageVersion > ++# > ++# Defines the following macros: > ++# TODAY(date_var format [locale]) > ++# - Get date of today in specified format and locale. > ++# * Parameters: > ++# date_var: Result date string > ++# format: date format for date(1) > ++# locale: locale of the string. Use current locale setting if > ++# locale is not given. > ++# > ++# Provides the following variables: > ++# TODAY_CHANGELOG: Today in the format that is used in RPM Changelog. > ++# e.g. Wed 08 Aug 2010 > ++# > ++# TODAY_SHORT: Short presentation of today, e.g. 20100818. > ++# > ++ > ++IF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_) > ++ SET(_DATE_TIME_FORMAT_CMAKE_ "DEFINED") > ++ > ++ MACRO(TODAY date_var format) > ++ INCLUDE(ManageVariable) > ++ SET(_locale ${ARGV2}) > ++ IF(_locale) > ++ SET(ENV{LC_ALL} ${_locale}) > ++ ENDIF(_locale) > ++ COMMAND_OUTPUT_TO_VARIABLE(${date_var} date --utc "${format}") > ++ ENDMACRO(TODAY date_var format) > ++ > ++ TODAY(TODAY_CHANGELOG "+%a %b %d %Y" "C") > ++ TODAY(TODAY_SHORT "+%Y%m%d" "C") > ++ENDIF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageAPIDoc.cmake > +@@ -0,0 +1,50 @@ > ++# - Mage generated API documents > ++# This module is for API document generation, such as doxygen. > ++# Defines following macros: > ++# MANAGE_APIDOC_DOXYGEN(doxygen_in doc_dir) > ++# - This macro generate documents according to doxygen template. > ++# Arguments: > ++# + doxygen_in: Doxygen template file. > ++# + doc_dir: Document source directory to be copied from. > ++# Reads following variable: > ++# + PRJ_DOC_DIR: Directory for document > ++# > ++# > ++IF(NOT DEFINED _MANAGE_APIDOC_CMAKE_) > ++ SET(_MANAGE_APIDOC_CMAKE_ "DEFINED") > ++ INCLUDE(ManageMessage) > ++ > ++ MACRO(MANAGE_APIDOC_DOXYGEN doxygen_in doc_dir) > ++ SET(SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES} "/Doxyfile$") > ++ SET(_manage_apidoc_doxygen_dependency_missing 0) > ++ IF(NOT PRJ_DOC_DIR) > ++ M_MSG(${M_OFF} "PRJ_DOC_DIR undefined. Doxygen support disabled.") > ++ SET(_manage_apidoc_doxygen_dependency_missing 1) > ++ ENDIF(NOT PRJ_DOC_DIR) > ++ > ++ FIND_PACKAGE(doxygen) > ++ IF(NOT PACKAGE_FOUND_NAME) > ++ M_MSG(${M_OFF} "Package doxygen not found. Doxygen support disabled.") > ++ SET(_manage_apidoc_doxygen_dependency_missing 1) > ++ ENDIF(NOT PACKAGE_FOUND_NAME) > ++ > ++ FIND_PROGRAM(DOXYGEN_CMD doxygen) > ++ IF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program doxygen not found. Doxygen support disabled.") > ++ SET(_manage_apidoc_doxygen_dependency_missing 1) > ++ ENDIF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND") > ++ > ++ IF(NOT _manage_apidoc_doxygen_dependency_missing) > ++ CONFIGURE_FILE(${doxygen_in} Doxyfile) > ++ > ++ ADD_CUSTOM_TARGET(doxygen > ++ COMMAND "${DOXYGEN_CMD}" "Doxyfile" > ++ ) > ++ > ++ INSTALL(DIRECTORY ${doc_dir} > ++ DESTINATION "${PRJ_DOC_DIR}" > ++ ) > ++ ENDIF(NOT _manage_apidoc_doxygen_dependency_missing) > ++ ENDMACRO(MANAGE_APIDOC_DOXYGEN doxygen_template) > ++ENDIF(NOT DEFINED _MANAGE_APIDOC_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageArchive.cmake > +@@ -0,0 +1,179 @@ > ++# - Pack source helper module > ++# By default CPack pack everything under the source directory, this is usually > ++# undesirable. We avoid this by using the sane default ignore list. > ++# > ++# Includes: > ++# ManageVersion > ++# CPack > ++# > ++# Included by: > ++# ManageRPM > ++# > ++# Read and Defines following variable: > ++# SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT: Default list of file patterns > ++# that are normally exclude from the source package. > ++# Override it by setting it before INCLUDE(ManageArchive). > ++# Defines following target: > ++# pack_remove_old: Remove old source package files. > ++# Defines following macro: > ++# SOURCE_ARCHIVE(outputDir [generator]) > ++# - Pack source files as <projectName>-<PRJ_VER>-Source.<packFormat>, > ++# Arguments: > ++# + outputDir: Directory to write source archive. > ++# + generator: (Optional) Method to make archive. Basically this argument > ++# is passed as CPACK_GENERATOR. Default to TGZ. > ++# Read following variables: > ++# + PROJECT_NAME: Project name > ++# + VENDOR: Organization that issue this project. > ++# + PRJ_VER: Project version > ++# + PRJ_SUMMARY: (Optional) Project summary > ++# + SOURCE_ARCHIVE_IGNORE_FILES: A list of regex filename pattern > ++# that should be excluded from source archive file. > ++# (SOURCE_ARCHIVE_IGNORE_FILE_CMAKE) is already in this list. > ++# Define following variables: > ++# + SOURCE_ARCHIVE_CONTENTS: List of files to be packed to archive. > ++# + SOURCE_ARCHIVE_FILE_EXTENSION: File extension of the source package > ++# files. > ++# + SOURCE_ARCHIVE_NAME: Name of source archive (without path) > ++# + SOURCE_ARCHIVE_FILE: Path to source archive file > ++# Target: > ++# + pack_src: Pack source files like package_source. > ++# + clean_pack_src: Remove all source archives. > ++# + clean_old_pack_src: Remove all old source package. > ++# > ++# > ++IF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_) > ++ SET (_MANAGE_ARCHIVE_CMAKE_ "DEFINED") > ++ SET(SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT > ++ "/\\\\.svn/" "/CVS/" "/\\\\.git/" "\\\\.gitignore$" "/\\\\.hg/" > ++ "/\\\\.hgignore$" > ++ "~$" "\\\\.swp$" "\\\\.log$" "\\\\.bak$" "\\\\.old$" > ++ "\\\\.gmo$" "\\\\.cache$" > ++ "\\\\.tar.gz$" "\\\\.tar.bz2$" "/src/config\\\\.h$" "NO_PACK") > ++ > ++ SET(SOURCE_ARCHIVE_IGNORE_FILES_CMAKE "/CMakeFiles/" "_CPack_Packages/" "/Testing/" > ++ "\\\\.directory$" "CMakeCache\\\\.txt$" > ++ "/install_manifest.txt$" > ++ "/cmake_install\\\\.cmake$" "/cmake_uninstall\\\\.cmake$""/CPack.*\\\\.cmake$" "/CTestTestfile\\\\.cmake$" > ++ "Makefile$" "/${PROJECT_NAME}-${PRJ_VER}-SOURCE/" > ++ ) > ++ > ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT} ${SOURCE_ARCHIVE_IGNORE_FILES_CMAKE}) > ++ > ++ INCLUDE(ManageVersion) > ++ > ++ # Internal: SOURCE_ARCHIVE_GET_CONTENTS() > ++ # - Return all source file to be packed. > ++ # This is called by SOURCE_ARCHIVE(), > ++ # So no need to call it again. > ++ FUNCTION(SOURCE_ARCHIVE_GET_CONTENTS ) > ++ SET(_fileList "") > ++ FILE(GLOB_RECURSE _ls "*") > ++ STRING(REPLACE "\\\\" "\\" _ignore_files "${SOURCE_ARCHIVE_IGNORE_FILES}") > ++ FOREACH(_file ${_ls}) > ++ SET(_matched 0) > ++ FOREACH(filePattern ${_ignore_files}) > ++ M_MSG(${M_INFO3} "_file=${_file} filePattern=${filePattern}") > ++ IF(_file MATCHES "${filePattern}") > ++ SET(_matched 1) > ++ BREAK() > ++ ENDIF(_file MATCHES "${filePattern}") > ++ ENDFOREACH(filePattern ${_ignore_files}) > ++ IF(NOT _matched) > ++ FILE(RELATIVE_PATH _file ${CMAKE_SOURCE_DIR} "${_file}") > ++ LIST(APPEND _fileList "${_file}") > ++ ENDIF(NOT _matched) > ++ ENDFOREACH(_file ${_ls}) > ++ SET(SOURCE_ARCHIVE_CONTENTS ${_fileList} CACHE STRING "Source archive file list" FORCE) > ++ M_MSG(${M_INFO2} "SOURCE_ARCHIVE_CONTENTS=${SOURCE_ARCHIVE_CONTENTS}") > ++ ENDFUNCTION(SOURCE_ARCHIVE_GET_CONTENTS var) > ++ > ++ MACRO(PACK_SOURCE_ARCHIVE outputDir) > ++ IF(PRJ_VER STREQUAL "") > ++ M_MSG(${M_FATAL} "PRJ_VER not defined") > ++ ENDIF(PRJ_VER STREQUAL "") > ++ IF(${ARGV2}) > ++ SET(CPACK_GENERATOR "${ARGV2}") > ++ ELSE(${ARGV2}) > ++ SET(CPACK_GENERATOR "TGZ") > ++ ENDIF(${ARGV2}) > ++ SET(CPACK_SOURCE_GENERATOR ${CPACK_GENERATOR}) > ++ IF(${CPACK_GENERATOR} STREQUAL "TGZ") > ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.gz") > ++ ELSEIF(${CPACK_GENERATOR} STREQUAL "TBZ2") > ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.bz2") > ++ ELSEIF(${CPACK_GENERATOR} STREQUAL "ZIP") > ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "zip") > ++ ENDIF(${CPACK_GENERATOR} STREQUAL "TGZ") > ++ > ++ SET(CPACK_SOURCE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES}) > ++ SET(CPACK_PACKAGE_VERSION ${PRJ_VER}) > ++ > ++ IF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING) > ++ SET(CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/README) > ++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING) > ++ > ++ IF(EXISTS ${CMAKE_SOURCE_DIR}/README) > ++ SET(CPACK_PACKAGE_DESCRIPTION_FILE ${CMAKE_SOURCE_DIR}/README) > ++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/README) > ++ > ++ IF(DEFINED PRJ_SUMMARY) > ++ SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "${PRJ_SUMMARY}") > ++ ENDIF(DEFINED PRJ_SUMMARY) > ++ > ++ SET(CPACK_SOURCE_PACKAGE_FILE_NAME "${PROJECT_NAME}-${PRJ_VER}-Source") > ++ SET(SOURCE_ARCHIVE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}.${SOURCE_ARCHIVE_FILE_EXTENSION}" CACHE STRING "Source archive name" FORCE) > ++ SET(SOURCE_ARCHIVE_FILE "${outputDir}/${SOURCE_ARCHIVE_NAME}" CACHE FILEPATH "Source archive file" FORCE) > ++ > ++ SET(CPACK_PACKAGE_VENDOR "${VENDOR}") > ++ SOURCE_ARCHIVE_GET_CONTENTS() > ++ > ++ SET(SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "") > ++ FOREACH(_file ${SOURCE_ARCHIVE_CONTENTS}) > ++ LIST(APPEND SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "${CMAKE_HOME_DIRECTORY}/${_file}") > ++ ENDFOREACH(_file ${SOURCE_ARCHIVE_CONTENTS}) > ++ > ++ INCLUDE(CPack) > ++ > ++ # Get relative path of outputDir > ++ FILE(RELATIVE_PATH _outputDir_rel ${CMAKE_BINARY_DIR} ${outputDir}) > ++ #MESSAGE("#_outputDir_rel=${_outputDir_rel}") > ++ > ++ IF("${_outputDir_rel}" STREQUAL ".") > ++ ADD_CUSTOM_TARGET_COMMAND(pack_src > ++ OUTPUT "${SOURCE_ARCHIVE_FILE}" > ++ COMMAND make package_source > ++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS} > ++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}" > ++ ) > ++ ELSE("${_outputDir_rel}" STREQUAL ".") > ++ FILE(MAKE_DIRECTORY ${outputDir}) > ++ ADD_CUSTOM_TARGET_COMMAND(pack_src > ++ OUTPUT "${SOURCE_ARCHIVE_FILE}" > ++ COMMAND make package_source > ++ COMMAND cmake -E copy "${SOURCE_ARCHIVE_NAME}" "${outputDir}" > ++ COMMAND cmake -E remove ${SOURCE_ARCHIVE_NAME} > ++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS_ABSOLUTE} > ++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}" > ++ ) > ++ ENDIF("${_outputDir_rel}" STREQUAL ".") > ++ > ++ ADD_CUSTOM_TARGET(clean_old_pack_src > ++ COMMAND find . > ++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}' ! -name '${PROJECT_NAME}-${PRJ_VER}-*.${SOURCE_ARCHIVE_FILE_EXTENSION}' > ++ -print -delete > ++ COMMENT "Cleaning old source archives" > ++ ) > ++ > ++ ADD_DEPENDENCIES(clean_old_pack_src changelog ) > ++ > ++ ADD_CUSTOM_TARGET(clean_pack_src > ++ COMMAND find . > ++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}' > ++ -print -delete > ++ COMMENT "Cleaning all source archives" > ++ ) > ++ ENDMACRO(PACK_SOURCE_ARCHIVE outputDir) > ++ > ++ENDIF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageEnvironment.cmake > +@@ -0,0 +1,190 @@ > ++# - Manage build environment such as environment variables and compile flags. > ++# This module predefine various environment variables, cmake policies, and > ++# compile flags. > ++# > ++# The setting can be viewed and modified by ccmake. > ++# > ++# List of frequently used variable and compile flags: > ++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}. > ++# + BIN_DIR: Directory for executable. > ++# Default: ${CMAKE_INSTALL_PREFIX}/bin > ++# + DATA_DIR: Directory for architecture independent data files. > ++# Default: ${CMAKE_INSTALL_PREFIX}/share > ++# + DOC_DIR: Directory for documentation > ++# Default: ${DATA_DIR}/doc > ++# + SYSCONF_DIR: System wide configuration files. > ++# Default: /etc > ++# + LIB_DIR: System wide library path. > ++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit, > ++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit. > ++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly. > ++# Default: ${CMAKE_INSTALL_PREFIX}/libexec > ++# + PROJECT_NAME: Project name > ++# > ++# Defines following macros: > ++# SET_COMPILE_ENV(var default_value [ENV_NAME env_name] > ++# [CACHE type docstring [FORCE]]) > ++# - Ensure a variable is set to nonempty value, then add the variable and value to > ++# compiling definition. > ++# The value is determined by following order: > ++# 1. Value of var if var is defined. > ++# 2. Environment variable with the same name (or specified via ENV_NAME) > ++# 3. Parameter default_value > ++# Parameters: > ++# + var: Variable to be set > ++# + default_value: Default value of the var > ++# + env_name: (Optional)The name of environment variable. > ++# Only need if different from var. > ++# + CACHE type docstring [FORCE]: > ++# Same with "SET" command. > ++# > ++# SET_USUAL_COMPILE_ENVS() > ++# - Set the most often used variable and compile flags. > ++# It defines compile flags according to the values of corresponding variables, > ++# usually under the same or similar name. > ++# If a corresponding variable is not defined yet, then a default value is assigned > ++# to that variable, then define the flag. > ++# > ++# Defines following flags according to the variable with same name. > ++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}. > ++# + BIN_DIR: Directory for executable. > ++# Default: ${CMAKE_INSTALL_PREFIX}/bin > ++# + DATA_DIR: Directory for architecture independent data files. > ++# Default: ${CMAKE_INSTALL_PREFIX}/share > ++# + DOC_DIR: Directory for documentation > ++# Default: ${DATA_DIR}/doc > ++# + SYSCONF_DIR: System wide configuration files. > ++# Default: /etc > ++# + LIB_DIR: System wide library path. > ++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit, > ++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit. > ++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly. > ++# Default: ${CMAKE_INSTALL_PREFIX}/libexec > ++# + PROJECT_NAME: Project name > ++# + PRJ_VER: Project version > ++# + PRJ_DATA_DIR: Data directory for the project. > ++# Default: ${DATA_DIR}/${PROJECT_NAME} > ++# + PRJ_DOC_DIR: DocuFILEPATH = File chooser dialog. > ++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER} > ++ > ++IF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_) > ++ SET(_MANAGE_ENVIRONMENT_CMAKE_ "DEFINED") > ++ SET(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON) > ++ CMAKE_POLICY(VERSION 2.6.2) > ++ > ++ MACRO(SET_COMPILE_ENV var default_value) > ++ SET(_stage "") > ++ SET(_env "${var}") > ++ SET(_setOpts "") > ++ SET(_force 0) > ++ FOREACH(_arg ${ARGN}) > ++ IF(_arg STREQUAL "ENV_NAME") > ++ SET(_stage "ENV_NAME") > ++ ELSEIF(_arg STREQUAL "CACHE") > ++ SET(_stage "_CACHE") > ++ ELSE(_arg STREQUAL "ENV_NAME") > ++ IF(_stage STREQUAL "ENV_NAME") > ++ SET(_env "${_arg}") > ++ ELSEIF(_stage STREQUAL "_CACHE") > ++ LIST(APPEND _setOpts "${_arg}") > ++ IF(_arg STREQUAL "FORCE") > ++ SET(_force 1) > ++ ENDIF(_arg STREQUAL "FORCE") > ++ ENDIF(_stage STREQUAL "ENV_NAME") > ++ ENDIF(_arg STREQUAL "ENV_NAME") > ++ ENDFOREACH(_arg ${ARGN}) > ++ > ++ IF(NOT "${_setOpts}" STREQUAL "") > ++ LIST(INSERT _setOpts 0 "CACHE") > ++ ENDIF(NOT "${_setOpts}" STREQUAL "") > ++ > ++ # Set the variable > ++ IF(_force) > ++ IF(NOT "$ENV{${_env}}" STREQUAL "") > ++ SET(${var} "$ENV{${_env}}" ${_setOpts}) > ++ ELSE(NOT "$ENV{${_env}}" STREQUAL "") > ++ SET(${var} "${default_value}" ${_setOpts}) > ++ ENDIF(NOT "$ENV{${_env}}" STREQUAL "") > ++ ELSE(_force) > ++ IF(NOT "${${var}}" STREQUAL "") > ++ SET(${var} "${${var}}" ${_setOpts}) > ++ ELSEIF(NOT "$ENV{${_env}}" STREQUAL "") > ++ SET(${var} "$ENV{${_env}}" ${_setOpts}) > ++ ELSE(NOT "${${var}}" STREQUAL "") > ++ # Default value > ++ SET(${var} "${default_value}" ${_setOpts}) > ++ ENDIF(NOT "${${var}}" STREQUAL "") > ++ ENDIF(_force) > ++ > ++ # Enforce CMP0005 to new, yet pop after ADD_DEFINITION > ++ CMAKE_POLICY(PUSH) > ++ CMAKE_POLICY(SET CMP0005 NEW) > ++ ADD_DEFINITIONS(-D${_env}=${${var}}) > ++ CMAKE_POLICY(POP) > ++ M_MSG(${M_INFO2} "SET(${var} ${${var}})") > ++ ENDMACRO(SET_COMPILE_ENV var default_value) > ++ > ++ MACRO(MANAGE_CMAKE_POLICY policyName defaultValue) > ++ IF(POLICY ${policyName}) > ++ CMAKE_POLICY(GET "${policyName}" _cmake_policy_value) > ++ IF(_cmake_policy_value STREQUAL "") > ++ # Policy not defined yet > ++ CMAKE_POLICY(SET "${policyName}" "${defaultValue}") > ++ ENDIF(_cmake_policy_value STREQUAL "") > ++ ENDIF(POLICY ${policyName}) > ++ ENDMACRO(MANAGE_CMAKE_POLICY policyName defaultValue) > ++ > ++ #################################################################### > ++ # Recommended policy setting > ++ # > ++ # CMP0005: Preprocessor definition values are now escaped automatically. > ++ # OLD:Preprocessor definition values are not escaped. > ++ MANAGE_CMAKE_POLICY(CMP0005 NEW) > ++ > ++ # CMP0009: FILE GLOB_RECURSE calls should not follow symlinks by default. > ++ # OLD: FILE GLOB_RECURSE calls follow symlinks > ++ MANAGE_CMAKE_POLICY(CMP0009 NEW) > ++ > ++ # CMP0017: Prefer files from the CMake module directory when including from there. > ++ # OLD: Prefer files from CMAKE_MODULE_PATH regardless > ++ MANAGE_CMAKE_POLICY(CMP0017 NEW) > ++ > ++ # Include should be put after the cmake policy > ++ INCLUDE(ManageMessage) > ++ M_MSG(${M_INFO1} "CMAKE_HOST_SYSTEM=${CMAKE_HOST_SYSTEM}") > ++ M_MSG(${M_INFO1} "CMAKE_SYSTEM=${CMAKE_SYSTEM}") > ++ > ++ #################################################################### > ++ # CMake Variables > ++ # > ++ SET_COMPILE_ENV(BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" > ++ CACHE PATH "Binary dir") > ++ SET_COMPILE_ENV(DATA_DIR "${CMAKE_INSTALL_PREFIX}/share" > ++ CACHE PATH "Data dir") > ++ SET_COMPILE_ENV(DOC_DIR "${DATA_DIR}/doc" > ++ CACHE PATH "Documentation dir") > ++ SET_COMPILE_ENV(SYSCONF_DIR "/etc" > ++ CACHE PATH "System configuration dir") > ++ SET_COMPILE_ENV(LIBEXEC_DIR "${CMAKE_INSTALL_PREFIX}/libexec" > ++ CACHE PATH "LIBEXEC dir") > ++ > ++ IF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") > ++ SET_COMPILE_ENV(IS_64 "64" CACHE STRING "IS_64") > ++ ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") > ++ > ++ SET_COMPILE_ENV(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib${IS_64}" > ++ CACHE PATH "Library dir") > ++ > ++ SET_COMPILE_ENV(PROJECT_NAME "${PROJECT_NAME}") > ++ SET_COMPILE_ENV(PRJ_DATA_DIR "${DATA_DIR}/${PROJECT_NAME}") > ++ > ++ # Directory to store cmake-fedora specific temporary files. > ++ IF(NOT CMAKE_FEDORA_TMP_DIR) > ++ SET(CMAKE_FEDORA_TMP_DIR "${CMAKE_BINARY_DIR}/NO_PACK") > ++ ENDIF(NOT CMAKE_FEDORA_TMP_DIR) > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_FEDORA_TMP_DIR} > ++ COMMAND cmake -E make_directory ${CMAKE_FEDORA_TMP_DIR} > ++ COMMENT "Create CMAKE_FEDORA_TMP_DIR" > ++ ) > ++ENDIF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_) > +--- /dev/null > ++++ b/Modules/ManageGConf.cmake > +@@ -0,0 +1,67 @@ > ++# - GConf relative targets such as install/unstall schemas. > ++# This module finds gconftool-2 or gconftool for GConf manipulation. > ++# > ++# Reads following variables: > ++# GCONF_SCHEMAS_FILE: Schema file. > ++# Default: "${PROJECT_NAME}.schemas" > ++# > ++# GCONF_SCHEMAS_INSTALLED_DIR: Direct of installed schemas files. > ++# Default: "${SYSCONF_INSTALL_DIR}/gconf/schemas" > ++# > ++# GCONF_CONFIG_SOURCE: configuration source. > ++# Default: "" (Use the system default) > ++# > ++# Defines following targets: > ++# install_schemas: install schemas > ++# > ++# uninstall_schemas: uninstall schemas > ++# > ++ > ++IF(NOT DEFINED _MANAGE_GCONF_CMAKE_) > ++ FIND_PROGRAM(GCONFTOOL_CMD NAMES gconftool-2 gconftool) > ++ > ++ IF(${GCONFTOOL_CMD} STREQUAL "GCONFTOOL_CMD-NOTFOUND") > ++ MESSAGE(FATAL_ERROR "gconftool and gconftool-2 are not found, please install GConf or GConf2.") > ++ ENDIF() > ++ > ++ IF (NOT DEFINED GCONF_SCHEMAS_FILE) > ++ SET(GCONF_SCHEMAS_FILE "${PROJECT_NAME}.schemas") > ++ ENDIF(NOT DEFINED GCONF_SCHEMAS_FILE) > ++ > ++ GET_FILENAME_COMPONENT(_gconf_schemas_basename ${GCONF_SCHEMAS_FILE} NAME) > ++ > ++ IF (NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR) > ++ IF(SYSCONF_INSTALL_DIR) > ++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_INSTALL_DIR}/gconf/schemas") > ++ ELSE(SYSCONF_INSTALL_DIR) > ++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_DIR}/gconf/schemas") > ++ ENDIF(SYSCONF_INSTALL_DIR) > ++ ENDIF(NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR) > ++ > ++ IF (NOT DEFINED GCONF_CONFIG_SOURCE) > ++ SET(GCONF_CONFIG_SOURCE "") > ++ ENDIF(NOT DEFINED GCONF_CONFIG_SOURCE) > ++ SET(ENV{GCONF_CONFIG_SOURCE} ${GCONF_CONFIG_SOURCE}) > ++ > ++ > ++ ADD_CUSTOM_TARGET(uninstall_schemas > ++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE} > ++ ${GCONFTOOL_CMD} --makefile-uninstall-rule > ++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} > ++ COMMENT "Uninstalling schemas" > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(install_schemas > ++ COMMAND cmake -E copy ${GCONF_SCHEMAS_FILE} ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} > ++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE} > ++ ${GCONFTOOL_CMD} --makefile-install-rule > ++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} > ++ DEPENDS ${GCONF_SCHEMAS_FILE} > ++ COMMENT "Installing schemas" > ++ ) > ++ > ++ INSTALL(FILES ${GCONF_SCHEMAS_FILE} > ++ DESTINATION "${GCONF_SCHEMAS_INSTALLED_DIR}") > ++ENDIF(NOT DEFINED _MANAGE_GCONF_CMAKE_) > ++ > ++ > +--- /dev/null > ++++ b/Modules/ManageInstall.cmake > +@@ -0,0 +1,25 @@ > ++# - Manage installation > ++# Convenient collection of macros and functions to manage installation. > ++# > ++# Defines following macros: > ++# MANAGE_INSTALL(var file1 [file2 ....]) > ++# - Managed install. Files are installed to the path specified by var. > ++# This macro also sets 'MANAGE_INSTALL_$var' as files that associate to this var > ++# The files that are associated to this var is > ++# Read and define: > ++# + MANAGE_INSTALL_$var : Files to be installed under var. > ++# Arguments: > ++# + var: A variable that contains install destination path > ++# + file1 ... : File to be installed to $var > ++# > ++ > ++IF(NOT DEFINED _MANAGE_INSTALL_CMAKE_) > ++ SET (_MANAGE_INSTALL_CMAKE_ "DEFINED") > ++ SET(MANAGE_INSTALL_FILES "") > ++ > ++ MACRO(MANAGE_INSTALL var file1) > ++ LIST(APPEND MANAGE_INSTALL_${var} ${file1} ${ARGN}) > ++ INSTALL(FILES $file1 ${ARGN} > ++ DESTINATION "${var}") > ++ ENDMACRO(MANAGE_INSTALL var file1) > ++ENDIF(NOT DEFINED _MANAGE_INSTALL_CMAKE_) > +--- /dev/null > ++++ b/Modules/ManageMessage.cmake > +@@ -0,0 +1,60 @@ > ++# - Manage the output and debug messages. > ++# This module has macros that control how many messages to be shown > ++# by defining the desire message level. > ++# > ++# Defined variables that represent verbose levels: > ++# 1: M_FATAL - Critical error,Should stop immediately > ++# 2: M_ERROR - Error that will Eventually fail > ++# 3: M_WARN - General Warning. > ++# 4: M_OFF - Optional functionalities are turned-off because requirement is not met. > ++# 5: M_INFO1 - Info/debug message > ++# 6: M_INFO2 - Info/debug message > ++# 7: M_INFO3 - Info/debug message > ++# > ++# Read following variable: > ++# + MANAGE_MESSAGE_LEVEL: Message level in integer. > ++# Messages with greater level will be suppressed. > ++# Default is ${M_OFF} > ++# + MANAGE_MESSAGE_LABELS: Labels that printed in front of the message for > ++# corresponding message level. > ++# Default is "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ") > ++# > ++# Define following macros: > ++# M_MSG(level msg) > ++# - Surpress the message if level is higher than MANAGE_MESSAGE_LEVEL > ++# Otherwise show the message. > ++# Arguments: > ++# + level: level of the message. > ++# + msg: Message to show. > ++# > ++ > ++ > ++IF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_) > ++ SET(_MANAGE_MESSAGE_CMAKE_ "DEFINED") > ++ SET(M_FATAL 1) > ++ SET(M_ERROR 2) > ++ SET(M_WARN 3) > ++ SET(M_OFF 4) > ++ SET(M_INFO1 5) > ++ SET(M_INFO2 6) > ++ SET(M_INFO3 7) > ++ IF(NOT DEFINED MANAGE_MESSAGE_LABELS) > ++ SET(MANAGE_MESSAGE_LABELS > ++ "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ") > ++ ENDIF(NOT DEFINED MANAGE_MESSAGE_LABELS) > ++ > ++ SET(MANAGE_MESSAGE_LEVEL ${M_OFF} CACHE STRING "Message (Verbose) Level") > ++ > ++ MACRO(M_MSG level msg) > ++ IF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL}) > ++ MATH(EXPR _lvl ${level}-1) > ++ LIST(GET MANAGE_MESSAGE_LABELS ${_lvl} _label) > ++ IF(${level} EQUAL 1) > ++ MESSAGE(FATAL_ERROR "${_label}${msg}") > ++ ELSE(${level} EQUAL 1) > ++ MESSAGE("${_label}${msg}") > ++ ENDIF(${level} EQUAL 1) > ++ ENDIF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL}) > ++ ENDMACRO(M_MSG level msg) > ++ENDIF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageRPM.cmake > +@@ -0,0 +1,327 @@ > ++# - RPM generation, maintaining (remove old rpm) and verification (rpmlint). > ++# This module provides macros that provides various rpm building and > ++# verification targets. > ++# > ++# This module needs variable from ManageArchive, so INCLUDE(ManageArchive) > ++# before this module. > ++# > ++# Includes: > ++# ManageMessage > ++# ManageTarget > ++# > ++# Reads and defines following variables if dependencies are satisfied: > ++# PRJ_RPM_SPEC_IN_FILE: spec.in that generate spec > ++# PRJ_RPM_SPEC_FILE: spec file for rpmbuild. > ++# RPM_DIST_TAG: (optional) Current distribution tag such as el5, fc10. > ++# Default: Distribution tag from rpm --showrc > ++# > ++# RPM_BUILD_TOPDIR: (optional) Directory of the rpm topdir. > ++# Default: ${CMAKE_BINARY_DIR} > ++# > ++# RPM_BUILD_SPECS: (optional) Directory of generated spec files > ++# and RPM-ChangeLog. > ++# Note this variable is not for locating > ++# SPEC template (project.spec.in), RPM-ChangeLog source files. > ++# These are located through the path of spec_in. > ++# Default: ${RPM_BUILD_TOPDIR}/SPECS > ++# > ++# RPM_BUILD_SOURCES: (optional) Directory of source (tar.gz or zip) files. > ++# Default: ${RPM_BUILD_TOPDIR}/SOURCES > ++# > ++# RPM_BUILD_SRPMS: (optional) Directory of source rpm files. > ++# Default: ${RPM_BUILD_TOPDIR}/SRPMS > ++# > ++# RPM_BUILD_RPMS: (optional) Directory of generated rpm files. > ++# Default: ${RPM_BUILD_TOPDIR}/RPMS > ++# > ++# RPM_BUILD_BUILD: (optional) Directory for RPM build. > ++# Default: ${RPM_BUILD_TOPDIR}/BUILD > ++# > ++# RPM_BUILD_BUILDROOT: (optional) Directory for RPM build. > ++# Default: ${RPM_BUILD_TOPDIR}/BUILDROOT > ++# > ++# Defines following variables: > ++# RPM_IGNORE_FILES: A list of exclude file patterns for PackSource. > ++# This value is appended to SOURCE_ARCHIVE_IGNORE_FILES after including > ++# this module. > ++# > ++# Defines following Macros: > ++# PACK_RPM() > ++# - Generate spec and pack rpm according to the spec file. > ++# Arguments: > ++# Targets: > ++# + srpm: Build srpm (rpmbuild -bs). > ++# + rpm: Build rpm and srpm (rpmbuild -bb) > ++# + rpmlint: Run rpmlint to generated rpms. > ++# + clean_rpm": Clean all rpm and build files. > ++# + clean_pkg": Clean all source packages, rpm and build files. > ++# + clean_old_rpm: Remove old rpm and build files. > ++# + clean_old_pkg: Remove old source packages and rpms. > ++# This macro defines following variables: > ++# + PRJ_RELEASE: Project release with distribution tags. (e.g. 1.fc13) > ++# + PRJ_RELEASE_NO: Project release number, without distribution tags. (e.g. 1) > ++# + PRJ_SRPM_FILE: Path to generated SRPM file, including relative path. > ++# + PRJ_RPM_BUILD_ARCH: Architecture to be build. > ++# + PRJ_RPM_FILES: Binary RPM files to be build. > ++# > ++# RPM_MOCK_BUILD() > ++# - Add mock related targets. > ++# Targets: > ++# + rpm_mock_i386: Make i386 rpm > ++# + rpm_mock_x86_64: Make x86_64 rpm > ++# This macor reads following variables?: > ++# + MOCK_RPM_DIST_TAG: Prefix of mock configure file, such as "fedora-11", "fedora-rawhide", "epel-5". > ++# Default: Convert from RPM_DIST_TAG > ++# > ++ > ++IF(NOT DEFINED _MANAGE_RPM_CMAKE_) > ++ SET (_MANAGE_RPM_CMAKE_ "DEFINED") > ++ > ++ INCLUDE(ManageMessage) > ++ INCLUDE(ManageTarget) > ++ SET(_manage_rpm_dependency_missing 0) > ++ > ++ FIND_PROGRAM(RPMBUILD_CMD NAMES "rpmbuild-md5") > ++ IF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "rpmbuild is not found in PATH, rpm build support is disabled.") > ++ SET(_manage_rpm_dependency_missing 1) > ++ ENDIF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND") > ++ > ++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES "${PROJECT_NAME}.spec.in" "project.spec.in") > ++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH "${CMAKE_SOURCE_DIR}/SPECS" "SPECS" "." "${RPM_BUILD_TOPDIR}/SPECS") > ++ FIND_FILE(PRJ_RPM_SPEC_IN_FILE NAMES ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES} PATHS ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH}) > ++ IF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND") > ++ M_MSG(${M_OFF} "Cannot find ${PROJECT}.spec.in or project .in" > ++ "${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH}") > ++ M_MSG(${M_OFF} "rpm build support is disabled.") > ++ SET(_manage_rpm_dependency_missing 1) > ++ ENDIF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND") > ++ > ++ IF(NOT _manage_rpm_dependency_missing) > ++ INCLUDE(ManageVariable) > ++ SET (SPEC_FILE_WARNING "This file is generated, please modified the .spec.in file instead!") > ++ > ++ EXECUTE_PROCESS(COMMAND rpm --showrc > ++ COMMAND grep -E "dist[[:space:]]*\\." > ++ COMMAND sed -e "s/^.*dist\\s*\\.//" > ++ COMMAND tr \\n \\t > ++ COMMAND sed -e s/\\t// > ++ OUTPUT_VARIABLE _RPM_DIST_TAG) > ++ > ++ SET(RPM_DIST_TAG "${_RPM_DIST_TAG}" CACHE STRING "RPM Dist Tag") > ++ SET(RPM_BUILD_TOPDIR "${CMAKE_BINARY_DIR}" CACHE PATH "RPM topdir") > ++ SET(RPM_BUILD_SPECS "${RPM_BUILD_TOPDIR}/SPECS" CACHE PATH "RPM SPECS dir") > ++ SET(RPM_BUILD_SOURCES "${RPM_BUILD_TOPDIR}/SOURCES" CACHE PATH "RPM SOURCES dir") > ++ SET(RPM_BUILD_SRPMS "${RPM_BUILD_TOPDIR}/SRPMS" CACHE PATH "RPM SRPMS dir") > ++ SET(RPM_BUILD_RPMS "${RPM_BUILD_TOPDIR}/RPMS" CACHE PATH "RPM RPMS dir") > ++ SET(RPM_BUILD_BUILD "${RPM_BUILD_TOPDIR}/BUILD" CACHE PATH "RPM BUILD dir") > ++ SET(RPM_BUILD_BUILDROOT "${RPM_BUILD_TOPDIR}/BUILDROOT" CACHE PATH "RPM BUILDROOT dir") > ++ > ++ ## RPM spec.in and RPM-ChangeLog.prev > ++ SET(PRJ_RPM_SPEC_FILE "${RPM_BUILD_SPECS}/${PROJECT_NAME}.spec" CACHE FILEPATH "spec") > ++ SET(PRJ_RPM_SPEC_IN_FILE "${_PRJ_RPM_SPEC_IN_FILE}" CACHE FILEPATH "spec.in") > ++ GET_FILENAME_COMPONENT(_PRJ_RPM_SPEC_IN_DIR "${PRJ_RPM_SPEC_IN_FILE}" PATH) > ++ SET(PRJ_RPM_SPEC_IN_DIR "${_PRJ_RPM_SPEC_IN_DIR}" CACHE INTERNAL "Dir contains spec.in") > ++ SET(RPM_CHANGELOG_PREV_FILE "${PRJ_RPM_SPEC_IN_DIR}/RPM-ChangeLog.prev" CACHE FILEPATH "ChangeLog.prev for RPM") > ++ SET(RPM_CHANGELOG_FILE "${RPM_BUILD_SPECS}/RPM-ChangeLog" CACHE FILEPATH "ChangeLog for RPM") > ++ > ++ # Add RPM build directories in ignore file list. > ++ GET_FILENAME_COMPONENT(_rpm_build_sources_basename ${RPM_BUILD_SOURCES} NAME) > ++ GET_FILENAME_COMPONENT(_rpm_build_srpms_basename ${RPM_BUILD_SRPMS} NAME) > ++ GET_FILENAME_COMPONENT(_rpm_build_rpms_basename ${RPM_BUILD_RPMS} NAME) > ++ GET_FILENAME_COMPONENT(_rpm_build_build_basename ${RPM_BUILD_BUILD} NAME) > ++ GET_FILENAME_COMPONENT(_rpm_build_buildroot_basename ${RPM_BUILD_BUILDROOT} NAME) > ++ SET(RPM_IGNORE_FILES > ++ "/${_rpm_build_sources_basename}/" "/${_rpm_build_srpms_basename}/" "/${_rpm_build_rpms_basename}/" > ++ "/${_rpm_build_build_basename}/" "/${_rpm_build_buildroot_basename}/" "debug.*s.list") > ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${RPM_IGNORE_FILES}) > ++ > ++ ENDIF(NOT _manage_rpm_dependency_missing) > ++ > ++ FUNCTION(PRJ_RPM_SPEC_IN_READ_FILE) > ++ SETTING_FILE_GET_VARIABLE(_releaseStr Release "${PRJ_RPM_SPEC_IN_FILE}" ":") > ++ STRING(REPLACE "%{?dist}" ".${RPM_DIST_TAG}" _PRJ_RELEASE ${_releaseStr}) > ++ STRING(REPLACE "%{?dist}" "" _PRJ_RELEASE_NO ${_releaseStr}) > ++ #MESSAGE("_releaseTag=${_releaseTag} _releaseStr=${_releaseStr}") > ++ > ++ SET(PRJ_RELEASE ${_PRJ_RELEASE} CACHE STRING "Release with dist" FORCE) > ++ SET(PRJ_RELEASE_NO ${_PRJ_RELEASE_NO} CACHE STRING "Release w/o dist" FORCE) > ++ SET(PRJ_SRPM "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.src.rpm" CACHE STRING "PRJ SRPM" FORCE) > ++ SET(PRJ_SRPM_FILE "${RPM_BUILD_SRPMS}/${PRJ_SRPM}" CACHE FILEPATH "PRJ SRPM File" FORCE) > ++ > ++ ## GET BuildArch > ++ SETTING_FILE_GET_VARIABLE(_archStr BuildArch "${PRJ_RPM_SPEC_IN_FILE}" ":") > ++ IF(NOT _archStr STREQUAL "noarch") > ++ SET(_archStr ${CMAKE_HOST_SYSTEM_PROCESSOR}) > ++ ENDIF(NOT _archStr STREQUAL "noarch") > ++ SET(PRJ_RPM_BUILD_ARCH "${_archStr}" CACHE STRING "BuildArch") > ++ > ++ ## Main rpm > ++ SET(PRJ_RPM_FILES "${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH}/${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.${PRJ_RPM_BUILD_ARCH}.rpm" > ++ CACHE STRING "RPM files" FORCE) > ++ > ++ ## Obtains sub packages > ++ ## [TODO] > ++ ENDFUNCTION(PRJ_RPM_SPEC_IN_READ_FILE) > ++ > ++ MACRO(RPM_CHANGELOG_WRITE_FILE) > ++ INCLUDE(DateTimeFormat) > ++ > ++ FILE(WRITE ${RPM_CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}-${PRJ_RELEASE_NO}\n") > ++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" CHANGELOG_ITEMS) > ++ > ++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${CHANGELOG_ITEMS}\n\n") > ++ > ++ # Update RPM_ChangeLog > ++ # Use this instead of FILE(READ is to avoid error when reading '\' > ++ # character. > ++ EXECUTE_PROCESS(COMMAND cat "${RPM_CHANGELOG_PREV_FILE}" > ++ OUTPUT_VARIABLE RPM_CHANGELOG_PREV > ++ OUTPUT_STRIP_TRAILING_WHITESPACE) > ++ > ++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${RPM_CHANGELOG_PREV}") > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT ${RPM_CHANGELOG_FILE} > ++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR} > ++ DEPENDS ${CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE} > ++ COMMENT "Write ${RPM_CHANGELOG_FILE}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(rpm_changelog_prev_update > ++ COMMAND ${CMAKE_COMMAND} -E copy ${RPM_CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE} > ++ DEPENDS ${RPM_CHANGELOG_FILE} > ++ COMMENT "${RPM_CHANGELOG_FILE} are saving as ${RPM_CHANGELOG_PREV_FILE}" > ++ ) > ++ > ++ IF(TARGET after_release_commit_pre) > ++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update) > ++ ENDIF(TARGET after_release_commit_pre) > ++ ENDMACRO(RPM_CHANGELOG_WRITE_FILE) > ++ > ++ MACRO(PACK_RPM) > ++ IF(NOT _manage_rpm_dependency_missing ) > ++ PRJ_RPM_SPEC_IN_READ_FILE() > ++ RPM_CHANGELOG_WRITE_FILE() > ++ > ++ # Generate spec > ++ CONFIGURE_FILE(${PRJ_RPM_SPEC_IN_FILE} ${PRJ_RPM_SPEC_FILE}) > ++ > ++ #------------------------------------------------------------------- > ++ # RPM build commands and targets > ++ > ++ FILE(MAKE_DIRECTORY ${RPM_BUILD_BUILD}) > ++ > ++ # Don't worry about SRPMS, RPMS and BUILDROOT, it will be created by rpmbuild > ++ > ++ ADD_CUSTOM_TARGET_COMMAND(srpm > ++ OUTPUT ${PRJ_SRPM_FILE} > ++ COMMAND ${RPMBUILD_CMD} -bs ${PRJ_RPM_SPEC_FILE} > ++ --define '_sourcedir ${RPM_BUILD_SOURCES}' > ++ --define '_builddir ${RPM_BUILD_BUILD}' > ++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}' > ++ --define '_rpmdir ${RPM_BUILD_RPMS}' > ++ --define '_specdir ${RPM_BUILD_SPECS}' > ++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${SOURCE_ARCHIVE_FILE} > ++ COMMENT "Building srpm" > ++ ) > ++ > ++ # RPMs (except SRPM) > ++ > ++ ADD_CUSTOM_TARGET_COMMAND(rpm > ++ OUTPUT ${PRJ_RPM_FILES} > ++ COMMAND ${RPMBUILD_CMD} -ba ${PRJ_RPM_SPEC_FILE} > ++ --define '_sourcedir ${RPM_BUILD_SOURCES}' > ++ --define '_builddir ${RPM_BUILD_BUILD}' > ++ --define '_buildrootdir ${RPM_BUILD_BUILDROOT}' > ++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}' > ++ --define '_rpmdir ${RPM_BUILD_RPMS}' > ++ --define '_specdir ${RPM_BUILD_SPECS}' > ++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${PRJ_SRPM_FILE} > ++ COMMENT "Building rpm" > ++ ) > ++ > ++ > ++ ADD_CUSTOM_TARGET(install_rpms > ++ COMMAND find ${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH} > ++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm' ! > ++ -name '${PROJECT_NAME}-debuginfo-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm' > ++ -print -exec sudo rpm --upgrade --hash --verbose '{}' '\\;' > ++ DEPENDS ${PRJ_RPM_FILES} > ++ COMMENT "Install all rpms except debuginfo" > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(rpmlint > ++ COMMAND find . > ++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm' > ++ -print -exec rpmlint '{}' '\\;' > ++ DEPENDS ${PRJ_SRPM_FILE} ${PRJ_RPM_FILES} > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(clean_old_rpm > ++ COMMAND find . > ++ -name '${PROJECT_NAME}*.rpm' ! -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm' > ++ -print -delete > ++ COMMAND find ${RPM_BUILD_BUILD} > ++ -path '${PROJECT_NAME}*' ! -path '${RPM_BUILD_BUILD}/${PROJECT_NAME}-${PRJ_VER}-*' > ++ -print -delete > ++ COMMENT "Cleaning old rpms and build." > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(clean_old_pkg > ++ ) > ++ > ++ ADD_DEPENDENCIES(clean_old_pkg clean_old_rpm clean_old_pack_src) > ++ > ++ ADD_CUSTOM_TARGET(clean_rpm > ++ COMMAND find . -name '${PROJECT_NAME}-*.rpm' -print -delete > ++ COMMENT "Cleaning rpms.." > ++ ) > ++ ADD_CUSTOM_TARGET(clean_pkg > ++ ) > ++ > ++ ADD_DEPENDENCIES(clean_rpm clean_old_rpm) > ++ ADD_DEPENDENCIES(clean_pkg clean_rpm clean_pack_src) > ++ ENDIF(NOT _manage_rpm_dependency_missing ) > ++ ENDMACRO(PACK_RPM) > ++ > ++ MACRO(RPM_MOCK_BUILD) > ++ IF(NOT _manage_rpm_dependency_missing ) > ++ FIND_PROGRAM(MOCK_CMD mock) > ++ IF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "mock is not found in PATH, mock support disabled.") > ++ ELSE(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") > ++ IF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch") > ++ IF(NOT DEFINED MOCK_RPM_DIST_TAG) > ++ STRING(REGEX MATCH "^fc([1-9][0-9]*)" _fedora_mock_dist "${RPM_DIST_TAG}") > ++ STRING(REGEX MATCH "^el([1-9][0-9]*)" _el_mock_dist "${RPM_DIST_TAG}") > ++ > ++ IF (_fedora_mock_dist) > ++ STRING(REGEX REPLACE "^fc([1-9][0-9]*)" "fedora-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}") > ++ ELSEIF (_el_mock_dist) > ++ STRING(REGEX REPLACE "^el([1-9][0-9]*)" "epel-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}") > ++ ELSE (_fedora_mock_dist) > ++ SET(MOCK_RPM_DIST_TAG "fedora-devel") > ++ ENDIF(_fedora_mock_dist) > ++ ENDIF(NOT DEFINED MOCK_RPM_DIST_TAG) > ++ > ++ #MESSAGE ("MOCK_RPM_DIST_TAG=${MOCK_RPM_DIST_TAG}") > ++ ADD_CUSTOM_TARGET(rpm_mock_i386 > ++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/i386 > ++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-i386" --resultdir="${RPM_BUILD_RPMS}/i386" ${PRJ_SRPM_FILE} > ++ DEPENDS ${PRJ_SRPM_FILE} > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(rpm_mock_x86_64 > ++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/x86_64 > ++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-x86_64" --resultdir="${RPM_BUILD_RPMS}/x86_64" ${PRJ_SRPM_FILE} > ++ DEPENDS ${PRJ_SRPM_FILE} > ++ ) > ++ ENDIF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch") > ++ ENDIF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") > ++ ENDIF(NOT _manage_rpm_dependency_missing ) > ++ > ++ ENDMACRO(RPM_MOCK_BUILD) > ++ > ++ENDIF(NOT DEFINED _MANAGE_RPM_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageRelease.cmake > +@@ -0,0 +1,57 @@ > ++# - Module that perform release task. > ++# This module provides common targets for release or post-release chores. > ++# > ++# Defines following macros: > ++# MANAGE_RELEASE(releaseTargets) > ++# - Run release targets and the target "after_release_commit". > ++# This macro skips the missing targets so distro package maintainers > ++# do not have to get the irrelevant dependencies. > ++# For the "hard" requirement, please use cmake command > ++# "ADD_DEPENDENCIES". > ++# Arguments: > ++# + releaseTargets: Targets need to be done for a release. > ++# Note that sequence of the targets does not guarantee the > ++# sequence of execution. > ++# Defines following targets: > ++# + release: Perform everything required for a release. > ++# Reads following variables: > ++# + RELEASE_DEPENDS_FILES: List of files that the release depends. > ++# Note that the sequence of the target does not guarantee the > ++# sequence of execution. > ++# > ++ > ++IF(NOT DEFINED _MANAGE_RELEASE_CMAKE_) > ++ SET(_MANAGE_RELEASE_CMAKE_ "DEFINED") > ++ INCLUDE(ManageMessage) > ++ > ++ MACRO(MANAGE_RELEASE) > ++ ## Target: release > ++ ADD_CUSTOM_TARGET(release > ++ DEPENDS ${RELEASE_DEPENDS_FILES} > ++ COMMENT "Releasing ${PROJECT_NAME}-${PRJ_VER}" > ++ ) > ++ > ++ ## Remove the missing targets > ++ SET(_releaseTargets "") > ++ FOREACH(_target ${ARGN}) > ++ IF(TARGET ${_target}) > ++ LIST(APPEND _releaseTargets "${_target}") > ++ ELSE(TARGET ${_target}) > ++ M_MSG(${M_OFF} "Target ${_target} does not exist, skipped.") > ++ ENDIF(TARGET ${_target}) > ++ ENDFOREACH(_target ${ARGN}) > ++ > ++ IF(_releaseTargets) > ++ ADD_DEPENDENCIES(release ${_releaseTargets}) > ++ ENDIF(_releaseTargets) > ++ > ++ ## Run after release > ++ #ADD_CUSTOM_COMMAND(TARGET release > ++ # POST_BUILD > ++ # COMMAND make after_release_commit > ++ # COMMENT "After released ${PROJECT_NAME}-${PRJ_VER}" > ++ # ) > ++ > ++ ENDMACRO(MANAGE_RELEASE) > ++ENDIF(NOT DEFINED _MANAGE_RELEASE_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageReleaseFedora.cmake > +@@ -0,0 +1,381 @@ > ++# - Module for working with Fedora and EPEL releases. > ++# > ++# This module provides convenient targets and macros for Fedora and EPEL > ++# releases by using fedpkg, koji, and bodhi > ++# > ++# This module check following files for dependencies: > ++# 1. ~/.fedora-upload-ca.cert : Ensure it has certificate file to submit to Fedora. > ++# 2. fedpkg : Required to submit to fedora. > ++# 3. koji : Required to submit to fedora. > ++# 4. bodhi : Required to submit to fedora. > ++# > ++# If on of above file is missing, this module will be skipped. > ++# > ++# This module read the supported release information from cmake-fedora.conf > ++# It finds cmake-fedora.conf in following order: > ++# 1. Current directory > ++# 2. Path as defined CMAKE_SOURCE_DIR > ++# 3. /etc/cmake-fedora.conf > ++# > ++# Includes: > ++# ManageMessage > ++# > ++# Defines following variables: > ++# CMAKE_FEDORA_CONF: Path to cmake_fedora.conf > ++# FEDPKG_CMD: Path to fedpkg > ++# KOJI_CMD: Path to koji > ++# GIT_CMD: Path to git > ++# BODHI_CMD: Path to bodhi > ++# KOJI_BUILD_SCRATCH_CMD: Path to koji-build-scratch > ++# FEDORA_RAWHIDE_VER: Fedora Rawhide version. > ++# FEDORA_SUPPORTED_VERS: Fedora supported versions. > ++# EPEL_SUPPORTED_VERS: EPEL supported versions. > ++# FEDPKG_DIR: Dir for fedpkg > ++# FEDORA_KAMA: Fedora Karma. Default:3 > ++# FEDORA_UNSTABLE_KARMA: Fedora unstable Karma. Default:3 > ++# FEDORA_AUTO_KARMA: Whether to use fedora Karma system. Default:"True" > ++# > ++# Defines following functions: > ++# RELEASE_FEDORA(tagList) > ++# - Release this project to specified Fedora and EPEL releases. > ++# Arguments: > ++# + tagList: Fedora and EPEL dist tags that this project submit to. > ++# E.g. "f18", "f17", "el7" > ++# You can also specify "fedora" for fedora current releases, > ++# and/or "epel" for EPEL current releases. > ++# > ++# Reads following variables: > ++# + PRJ_SRPM_FILE: Project SRPM > ++# + FEDPKG_DIR: Directory for fedpkg checkout. > ++# Default: FedPkg. > ++# Reads and define following variables: > ++# + FEDORA_RAWHIDE_VER: Numeric version of rawhide, such as 18 > ++# + FEDORA_SUPPORTED_VERS: Numeric versions of currently supported Fedora, > ++# such as 17;16 > ++# + EPEL_SUPPORTED_VERS: Numeric versions of currently supported EPEL > ++# since version 5. Such as 6;5 > ++# + FEDORA_KARMA: Karma for auto pushing. > ++# Default: 3 > ++# + FEDORA_UNSTABLE_KARMA: Karma for auto unpushing. > ++# Default: 3 > ++# + FEDORA_AUTO_KARMA: Whether to enable auto pushing/unpushing > ++# Default: True > ++# Defines following targets: > ++# + release_fedora: Make necessary steps for releasing on fedora, > ++# such as making source file tarballs, source rpms, build with fedpkg > ++# and upload to bodhi. > ++# + bodhi_new: Submit the package to bodhi > ++# + fedpkg_<tag>_build: Build for tag > ++# + fedpkg_<tag>_commit: Import, commit and push > ++# + koji_build_scratch: Scratch build using koji > ++# > ++# > ++ > ++IF(NOT DEFINED _MANAGE_RELEASE_FEDORA_) > ++ SET(_MANAGE_RELEASE_FEDORA_ "DEFINED") > ++ INCLUDE(ManageMessage) > ++ INCLUDE(ManageTarget) > ++ SET(_manage_release_fedora_dependencies_missing 0) > ++ SET(KOJI_BUILD_SCRATCH "koji-build-scratch" CACHE INTERNAL "Koji build scratch name") > ++ > ++ FIND_FILE(CMAKE_FEDORA_CONF cmake-fedora.conf "." "${CMAKE_SOURCE_DIR}" "${SYSCONF_DIR}") > ++ M_MSG(${M_INFO1} "CMAKE_FEDORA_CONF=${CMAKE_FEDORA_CONF}") > ++ IF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND") > ++ M_MSG(${M_OFF} "cmake-fedora.conf cannot be found! Fedora release support disabled.") > ++ SET(_manage_release_fedora_dependencies_missing 1) > ++ ENDIF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND") > ++ > ++ FIND_PROGRAM(FEDPKG_CMD fedpkg) > ++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program fedpkg is not found! Fedora support disabled.") > ++ SET(_manage_release_fedora_dependencies_missing 1) > ++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > ++ > ++ FIND_PROGRAM(KOJI_CMD koji) > ++ IF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program koji is not found! Koji support disabled.") > ++ ENDIF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND") > ++ > ++ FIND_PROGRAM(GIT_CMD git) > ++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program git is not found! Fedora support disabled.") > ++ SET(_manage_release_fedora_dependencies_missing 1) > ++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > ++ > ++ FIND_PROGRAM(BODHI_CMD bodhi) > ++ IF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program bodhi is not found! Bodhi support disabled.") > ++ ENDIF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND") > ++ > ++ > ++ ## Set variables > ++ IF(NOT _manage_release_fedora_dependencies_missing) > ++ # Set release tags according to CMAKE_FEDORA_CONF > ++ SETTING_FILE_GET_ALL_VARIABLES(${CMAKE_FEDORA_CONF}) > ++ > ++ SET(FEDORA_RAWHIDE_VER "${FEDORA_RAWHIDE_VERSION}" > ++ CACHE STRING "Fedora Rawhide ver" FORCE) > ++ STRING_SPLIT(_FEDORA_SUPPORTED_VERS " " ${FEDORA_SUPPORTED_VERSIONS}) > ++ SET(FEDORA_SUPPORTED_VERS ${_FEDORA_SUPPORTED_VERS} > ++ CACHE STRING "Fedora supported vers" FORCE) > ++ > ++ STRING_SPLIT(_EPEL_SUPPORTED_VERS " " ${EPEL_SUPPORTED_VERSIONS}) > ++ SET(EPEL_SUPPORTED_VERS ${_EPEL_SUPPORTED_VERS} > ++ CACHE STRING "EPEL supported vers" FORCE) > ++ > ++ SET(FEDORA_KOJI_TAG_POSTFIX "" CACHE STRING "Koji Fedora tag prefix") > ++ SET(EPEL_KOJI_TAG_POSTFIX "-testing-candidate" > ++ CACHE STRING "Koji EPEL tag prefix") > ++ > ++ SET(BODHI_TEMPLATE_FILE "${CMAKE_FEDORA_TMP_DIR}/bodhi.template" > ++ CACHE FILEPATH "Bodhi template file" > ++ ) > ++ > ++ SET(FEDPKG_DIR "${CMAKE_BINARY_DIR}/FedPkg" CACHE PATH "FedPkg dir") > ++ FILE(MAKE_DIRECTORY ${FEDPKG_DIR}) > ++ > ++ GET_FILENAME_COMPONENT(_FEDPKG_DIR_NAME ${FEDPKG_DIR} NAME) > ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES "/${_FEDPKG_DIR_NAME}/") > ++ > ++ ## Fedora package variables > ++ SET(FEDORA_KARMA "3" CACHE STRING "Fedora Karma") > ++ SET(FEDORA_UNSTABLE_KARMA "-3" CACHE STRING "Fedora unstable Karma") > ++ SET(FEDORA_AUTO_KARMA "True" CACHE STRING "Fedora auto Karma") > ++ > ++ FIND_PROGRAM(KOJI_BUILD_SCRATCH_CMD ${KOJI_BUILD_SCRATCH} PATHS ${CMAKE_BINARY_DIR}/scripts . ) > ++ IF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program koji_build_scratch is not found!") > ++ ENDIF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND") > ++ > ++ SET(FEDPKG_PRJ_DIR "${FEDPKG_DIR}/${PROJECT_NAME}") > ++ > ++ ## Don't use what is in git, otherwise it will be cleaned > ++ ## By make clean > ++ SET(FEDPKG_PRJ_DIR_GIT "${FEDPKG_PRJ_DIR}/.git/.cmake-fedora") > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT ${FEDPKG_PRJ_DIR_GIT} > ++ COMMAND [ -d ${FEDPKG_PRJ_DIR} ] || ${FEDPKG_CMD} clone ${PROJECT_NAME} > ++ COMMAND ${CMAKE_COMMAND} -E touch ${FEDPKG_PRJ_DIR_GIT} > ++ COMMENT "Making FedPkg directory" > ++ WORKING_DIRECTORY ${FEDPKG_DIR} > ++ VERBATIM > ++ ) > ++ > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > ++ > ++ FUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH) > ++ IF(NOT _manage_release_fedora_dependencies_missing) > ++ ADD_CUSTOM_TARGET(koji_build_scratch > ++ COMMAND ${KOJI_BUILD_SCRATCH_CMD} ${PRJ_SRPM_FILE} ${ARGN} > ++ DEPENDS "${PRJ_SRPM_FILE}" > ++ COMMENT "koji scratch build on ${PRJ_SRPM_FILE}" > ++ VERBATIM > ++ ) > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > ++ ADD_DEPENDENCIES(koji_build_scratch rpmlint) > ++ ADD_DEPENDENCIES(tag_pre koji_build_scratch) > ++ ENDFUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH) > ++ > ++ # Convert fedora koji tag to bodhi tag > ++ FUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag) > ++ STRING(REGEX REPLACE "f([0-9]+)" "fc\\1" _tag_replace "${tag}") > ++ IF(_tag_replace STREQUAL "") > ++ SET(${bodhiTag} "${tag}" PARENT_SCOPE) > ++ ELSE(_tag_replace STREQUAL "") > ++ SET(${bodhiTag} "${_tag_replace}" PARENT_SCOPE) > ++ ENDIF(_tag_replace STREQUAL "") > ++ ENDFUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag) > ++ > ++ FUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag) > ++ IF(NOT _manage_release_fedora_dependencies_missing) > ++ SET(_branch ${tag}) > ++ IF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > ++ SET(_branch "master") > ++ ENDIF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > ++ > ++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}") > ++ > ++ ## Fedpkg import and commit > ++ SET(_import_opt "") > ++ IF(NOT ver EQUAL FEDORA_RAWHIDE_VER) > ++ SET(_import_opt "-b ${tag}") > ++ ENDIF(NOT ver EQUAL FEDORA_RAWHIDE_VER) > ++ > ++ #Commit summary > ++ IF (DEFINED CHANGE_SUMMARY) > ++ SET (COMMIT_MSG "-m" "${CHANGE_SUMMARY}") > ++ ELSE(DEFINED CHANGE_SUMMARY) > ++ SET (COMMIT_MSG "-m" "On releasing ${PRJ_VER}-${PRJ_RELEASE_NO}") > ++ ENDIF(DEFINED CHANGE_SUMMARY) > ++ # Depends on tag file instead of target "tag" > ++ # To avoid excessive scratch build and rpmlint > ++ SET(_commit_opt --push --tag ) > ++ > ++ SET(_fedpkg_nvrd "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}") > ++ SET(_fedpkg_nvrd_commit_file > ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.commit") > ++ > ++ IF(_branch STREQUAL "master") > ++ # Can't use ADD_CUSTOM_TARGET_COMMAND here, as the COMMIT_SUMMARY may have semi-colon ':' > ++ ADD_CUSTOM_COMMAND(OUTPUT "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" > ++ COMMAND test -d ${PROJECT_NAME} || ${FEDPKG_CMD} clone ${PROJECT_NAME} > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > ++ COMMAND ${GIT_CMD} pull --all > ++ COMMAND ${FEDPKG_CMD} import "${PRJ_SRPM_FILE}" > ++ COMMAND ${FEDPKG_CMD} commit ${_commit_opt} -m "${CHANGE_SUMMARY}" > ++ COMMAND ${GIT_CMD} push --all > ++ COMMAND ${CMAKE_COMMAND} -E touch "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" > ++ DEPENDS "${FEDPKG_PRJ_DIR_GIT}" "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" "${PRJ_SRPM_FILE}" > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > ++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit > ++ DEPENDS ${FEDPKG_NVR_RAWHIDE_COMMIT_FILE} > ++ ) > ++ ELSE(_branch STREQUAL "master") > ++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_commit_file}" > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > ++ COMMAND ${GIT_CMD} pull > ++ COMMAND ${GIT_CMD} merge -m "Merge branch 'master' into ${_branch}" master > ++ COMMAND ${FEDPKG_CMD} push > ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_commit_file}" > ++ DEPENDS "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > ++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit > ++ DEPENDS "${_fedpkg_nvrd_commit_file}" > ++ ) > ++ ENDIF(_branch STREQUAL "master") > ++ > ++ ## Fedpkg build > ++ SET(_fedpkg_nvrd_build_file > ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}") > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_build_file}" > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > ++ COMMAND ${FEDPKG_CMD} build > ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}" > ++ DEPENDS "${_fedpkg_nvrd_commit_file}" > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > ++ COMMENT "fedpkg build on ${_branch}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_build > ++ DEPENDS "${_fedpkg_nvrd_build_file}" > ++ ) > ++ > ++ ADD_DEPENDENCIES(bodhi_new fedpkg_${_branch}_build) > ++ > ++ ## Fedpkg update > ++ SET(_fedpkg_nvrd_update_file > ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.update") > ++ > ++ ADD_CUSTOM_TARGET_COMMAND(fedpkg_${_branch}_update > ++ OUTPUT "${_fedpkg_nvrd_update_file}" > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > ++ COMMAND ${FEDPKG_CMD} update > ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}" > ++ DEPENDS ${_fedpkg_nvrd_build_file} > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > ++ COMMENT "fedpkg build on ${_branch}" > ++ VERBATIM > ++ ) > ++ > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > ++ ENDFUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag) > ++ > ++ MACRO(_append_notes _file) > ++ STRING(REGEX REPLACE "\n" "\n " _notes "${CHANGELOG_ITEMS}") > ++ FILE(APPEND "${_file}" "notes=${_notes}\n\n") > ++ ENDMACRO(_append_notes _file) > ++ > ++ FUNCTION(RELEASE_APPEND_BODHI_FILE tag) > ++ IF(NOT _manage_release_fedora_dependencies_missing) > ++ # Rawhide does not go to bodhi > ++ IF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > ++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}") > ++ > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "[${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}]\n\n") > ++ > ++ IF(BODHI_UPDATE_TYPE) > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=${BODHI_UPDATE_TYPE}\n\n") > ++ ELSE(BODHI_UPDATE_TYPE) > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=bugfix\n\n") > ++ ENDIF(BODHI_UPDATE_TYPE) > ++ > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "request=testing\n") > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "bugs=${REDHAT_BUGZILLA}\n") > ++ > ++ _append_notes(${BODHI_TEMPLATE_FILE}) > ++ > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "autokarma=${FEDORA_AUTO_KARMA}\n") > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "stable_karma=${FEDORA_KARMA}\n") > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "unstable_karma=${FEDORA_UNSTABLE_KARMA}\n") > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "close_bugs=True\n") > ++ > ++ IF(SUGGEST_REBOOT) > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=True\n") > ++ ELSE(SUGGEST_REBOOT) > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=False\n\n") > ++ ENDIF(SUGGEST_REBOOT) > ++ ENDIF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > ++ ENDFUNCTION(RELEASE_APPEND_BODHI_FILE tag) > ++ > ++ FUNCTION(RELEASE_FEDORA) > ++ IF(NOT _manage_release_fedora_dependencies_missing) > ++ ## Parse tags > ++ SET(_build_list "f${FEDORA_RAWHIDE_VER}") > ++ FOREACH(_rel ${ARGN}) > ++ IF(_rel STREQUAL "fedora") > ++ FOREACH(_ver ${FEDORA_SUPPORTED_VERS}) > ++ LIST(APPEND _build_list "f${_ver}") > ++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS}) > ++ ELSEIF(_rel STREQUAL "epel") > ++ FOREACH(_ver ${EPEL_SUPPORTED_VERS}) > ++ LIST(APPEND _build_list "el${_ver}") > ++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS}) > ++ ELSE(_rel STREQUAL "fedora") > ++ LIST(APPEND _build_list "${_rel}") > ++ ENDIF(_rel STREQUAL "fedora") > ++ ENDFOREACH(_rel ${ARGN}) > ++ LIST(REMOVE_DUPLICATES _build_list) > ++ > ++ IF(BODHI_USER) > ++ SET(_bodhi_login "-u ${BODHI_USER}") > ++ ENDIF(BODHI_USER) > ++ > ++ ADD_CUSTOM_TARGET(bodhi_new > ++ COMMAND ${BODHI_CMD} --new ${_bodhi_login} --file ${BODHI_TEMPLATE_FILE} > ++ DEPENDS "${BODHI_TEMPLATE_FILE}" > ++ COMMENT "Submit new release to bodhi (Fedora)" > ++ VERBATIM > ++ ) > ++ > ++ # NVRD: Name-Version-Release-Dist > ++ SET(FEDPKG_NVR_RAWHIDE "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.fc${FEDORA_RAWHIDE_VER}") > ++ SET(FEDPKG_NVR_RAWHIDE_COMMIT_FILE "${CMAKE_FEDORA_TMP_DIR}/${FEDPKG_NVR_RAWHIDE}.commit") > ++ > ++ ## Create targets > ++ FILE(REMOVE "${BODHI_TEMPLATE_FILE}") > ++ RELEASE_ADD_KOJI_BUILD_SCRATCH(${_build_list}) > ++ FOREACH(_tag ${_build_list}) > ++ RELEASE_ADD_FEDPKG_TARGETS("${_tag}") > ++ RELEASE_APPEND_BODHI_FILE("${_tag}") > ++ ENDFOREACH(_tag ${_build_list}) > ++ > ++ ADD_CUSTOM_TARGET(release_fedora > ++ COMMENT "Release for Fedora") > ++ > ++ ADD_DEPENDENCIES(release_fedora bodhi_new) > ++ > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > ++ ENDFUNCTION(RELEASE_FEDORA) > ++ENDIF(NOT DEFINED _MANAGE_RELEASE_FEDORA_) > ++ > +--- /dev/null > ++++ b/Modules/ManageSourceVersionControl.cmake > +@@ -0,0 +1,137 @@ > ++# - Module for manipulate source version control systems. > ++# This module provides an universal interface for supported > ++# source version control systems, namely: > ++# Git, Mercurial and SVN. > ++# > ++# Following targets are defined for each source version control (in Git terminology): > ++# - tag: Tag the working tree with PRJ_VER and CHANGE_SUMMARY. > ++# This target also does: > ++# 1. Ensure there is nothing uncommitted. > ++# 2. Push the commits and tags to server > ++# - tag_pre: Targets that 'tag' depends on. > ++# So you can push some check before the tag. > ++# - after_release_commit: > ++# This target does some post release chores, such as > ++# updating ChangeLog.prev and RPM-ChangeLog.prev, then push them to server. > ++# > ++# Following variables are defined for each source version control: > ++# - MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE: > ++# The file that would be touched after target tag is completed. > ++# > ++# > ++ > ++IF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_) > ++ SET(_MANAGE_SOURCE_VERSION_CONTROL_CMAKE_ "DEFINED") > ++ SET(_after_release_message "After released ${PRJ_VER}") > ++ INCLUDE(ManageTarget) > ++ > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON) > ++ ADD_CUSTOM_TARGET(tag_pre > ++ COMMENT "Pre-tagging check" > ++ ) > ++ > ++ > ++ ADD_CUSTOM_TARGET(after_release_commit_pre > ++ COMMENT "Before 'after_release_commit'" > ++ ) > ++ > ++ IF(TARGET changelog_prev_update) > ++ ADD_DEPENDENCIES(after_release_commit_pre changelog_prev_update) > ++ ENDIF(TARGET changelog_prev_update) > ++ > ++ IF(TARGET rpm_changelog_prev_update) > ++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update) > ++ ENDIF(TARGET rpm_changelog_prev_update) > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON) > ++ > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT) > ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE > ++ ${CMAKE_SOURCE_DIR}/.git/refs/tags/${PRJ_VER} > ++ CACHE PATH "Source Version Control Tag File" FORCE) > ++ > ++ ADD_CUSTOM_TARGET(after_release_commit > ++ COMMAND make after_release_commit_pre > ++ COMMAND git commit -a -m "${_after_release_message}" > ++ COMMAND git push > ++ COMMENT "After released ${PRJ_VER}" > ++ VERBATIM > ++ ) > ++ > ++ # Can't use ADD_CUSTOM_TARGET here, as the COMMIT_SUMMARY may have semi-colon ':' > ++ ADD_CUSTOM_TARGET(tag > ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(commit_clean > ++ COMMAND git diff --exit-code > ++ COMMENT "Is git commit clean?" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE} > ++ COMMAND make commit_clean > ++ COMMAND make tag_pre > ++ COMMAND git tag -a -m "${CHANGE_SUMMARY}" "${PRJ_VER}" HEAD > ++ COMMENT "Tagging the source as ver ${PRJ_VER}" > ++ VERBATIM > ++ ) > ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT) > ++ > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_HG) > ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE > ++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER} > ++ CACHE PATH "Source Version Control Tag File" FORCE) > ++ > ++ ADD_CUSTOM_TARGET(after_release_commit > ++ COMMAND make after_release_commit_pre > ++ COMMAND hg commit -m "${_after_release_message}" > ++ COMMAND hg push > ++ COMMENT "After released ${PRJ_VER}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(tag > ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > ++ ) > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > ++ COMMAND make tag_pre > ++ COMMAND hg tag -m "${CHANGE_SUMMARY}" "${PRJ_VER}" > ++ COMMAND ${CMAKE_COMMAND} -E touch "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > ++ COMMENT "Tagging the source as ver ${PRJ_VER}" > ++ VERBATIM > ++ ) > ++ > ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_HG) > ++ > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN) > ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE > ++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER} > ++ CACHE PATH "Source Version Control Tag File" FORCE) > ++ > ++ ADD_CUSTOM_TARGET(after_release_commit > ++ COMMAND make after_release_commit_pre > ++ COMMAND svn commit -m "${_after_release_message}" > ++ COMMENT "After released ${PRJ_VER}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(tag > ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > ++ COMMAND make tag_pre > ++ COMMAND svn copy "${SOURCE_BASE_URL}/trunk" "${SOURCE_BASE_URL}/tags/${PRJ_VER}" -m "${CHANGE_SUMMARY}" > ++ COMMAND cmake -E touch ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE} > ++ COMMENT "Tagging the source as ver ${PRJ_VER}" > ++ VERBATIM > ++ ) > ++ > ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN) > ++ > ++ENDIF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageString.cmake > +@@ -0,0 +1,325 @@ > ++# - Collection of String utility macros. > ++# > ++# Included by: > ++# ManageVarible > ++# > ++# Defines the following macros: > ++# STRING_TRIM(var str [NOUNQUOTE]) > ++# - Trim a string by removing the leading and trailing spaces, > ++# just like STRING(STRIP ...) in CMake 2.6 and later. > ++# This macro is needed as CMake 2.4 does not support STRING(STRIP ..) > ++# This macro also remove quote and double quote marks around the string, > ++# unless NOUNQUOTE is defined. > ++# * Parameters: > ++# + var: A variable that stores the result. > ++# + str: A string. > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > ++# > ++# STRING_ESCAPE_SEMICOLON(var str) > ++# - Escape the semicolon > ++# * Parameters: > ++# + var: A variable that stores the result. > ++# + str: A string. > ++# > ++# STRING_UNQUOTE(var str) > ++# - Remove double quote marks and quote marks around a string. > ++# If the string is not quoted, then content of str is copied to var > ++# * Parameters: > ++# + var: A variable that stores the result. > ++# + str: A string. > ++# > ++# STRING_JOIN(var delimiter str_list [str...]) > ++# - Concatenate strings, with delimiter inserted between strings. > ++# * Parameters: > ++# + var: A variable that stores the result. > ++# + str_list: A list of string. > ++# + str: (Optional) more string to be join. > ++# > ++# STRING_SPLIT(var delimiter str [NOESCAPE_SEMICOLON]) > ++# - Split a string into a list using a delimiter, which can be in 1 or more > ++# characters long. > ++# * Parameters: > ++# + var: A variable that stores the result. > ++# + delimiter: To separate a string. > ++# + str: A string. > ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. > ++# > ++ > ++IF(NOT DEFINED _MANAGE_STRING_CMAKE_) > ++ SET(_MANAGE_STRING_CMAKE_ "DEFINED") > ++ > ++ # Return (index of lefttmost non match character) > ++ # Return _strLen if all characters matches regex > ++ FUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str regex) > ++ STRING(LENGTH "${str}" _strLen) > ++ SET(_index 0) > ++ SET(_ret ${_strLen}) > ++ WHILE(_index LESS _strLen) > ++ STRING(SUBSTRING "${str}" ${_index} 1 _strCursor) > ++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}") > ++ IF(NOT "${_strCursor}" MATCHES "${regex}") > ++ SET(_ret ${_index}) > ++ SET(_index ${_strLen}) > ++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}") > ++ > ++ MATH(EXPR _index ${_index}+1) > ++ ENDWHILE(_index LESS _strLen) > ++ SET(${var} ${_ret} PARENT_SCOPE) > ++ ENDFUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str) > ++ > ++ # Return (index of rightmost non match character) +1 > ++ # Return 0 if all characters matches regex > ++ # > ++ FUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str regex) > ++ STRING(LENGTH "${str}" _strLen) > ++ MATH(EXPR _index ${_strLen}) > ++ SET(_ret 0) > ++ WHILE(_index GREATER 0) > ++ MATH(EXPR _index_1 ${_index}-1) > ++ STRING(SUBSTRING "${str}" ${_index_1} 1 _strCursor) > ++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}") > ++ > ++ IF(NOT "${_strCursor}" MATCHES "${regex}") > ++ SET(_ret ${_index}) > ++ SET(_index 0) > ++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}") > ++ MATH(EXPR _index ${_index}-1) > ++ ENDWHILE(_index GREATER 0) > ++ SET(${var} ${_ret} PARENT_SCOPE) > ++ ENDFUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str) > ++ > ++ FUNCTION(STRING_TRIM var str) > ++ #_STRING_ESCAPE(_ret "${str}" ${ARGN}) > ++ STRING_LEFTMOST_NOTMATCH_INDEX(_leftIndex "${str}" "[ \t\n\r]") > ++ STRING_RIGHTMOST_NOTMATCH_INDEX(_rightIndex "${str}" "[ \t\n\r]") > ++ #MESSAGE("_left=${_leftIndex} _rightIndex=${_rightIndex} str=|${str}|") > ++ MATH(EXPR _subLen ${_rightIndex}-${_leftIndex}) > ++ SET(_NOUNQUOTE 0) > ++ FOREACH( _arg ${ARGN}) > ++ IF(_arg STREQUAL "NOUNQUOTE") > ++ SET(_NOUNQUOTE 1) > ++ ENDIF(_arg STREQUAL "NOUNQUOTE") > ++ ENDFOREACH( _arg ${ARGN}) > ++ > ++ IF(_subLen GREATER 0) > ++ STRING(SUBSTRING "${str}" ${_leftIndex} ${_subLen} _ret) > ++ # IF _subLen > 1 > ++ # IF UNQUOTE; then unquote > ++ # Otherwise don't touch > ++ IF (_subLen GREATER 1) > ++ IF(NOT _NOUNQUOTE) > ++ STRING_UNQUOTE(_ret "${_ret}") > ++ ENDIF(NOT _NOUNQUOTE) > ++ ENDIF (_subLen GREATER 1) > ++ ELSE(_subLen GREATER 0) > ++ SET(_ret "") > ++ ENDIF(_subLen GREATER 0) > ++ SET(${var} "${_ret}" PARENT_SCOPE) > ++ > ++ # Unencoding > ++ #_STRING_UNESCAPE(${var} "${_ret}" ${ARGN}) > ++ ENDFUNCTION(STRING_TRIM var str) > ++ > ++ MACRO(STRING_ESCAPE_SEMICOLON var str) > ++ STRING(REGEX REPLACE ";" "\\\\;" ${var} "${str}") > ++ ENDMACRO(STRING_ESCAPE_SEMICOLON var str) > ++ > ++ # Internal macro > ++ # Nested Variable cannot be escaped here, as variable is already substituted > ++ # at the time it passes to this macro. > ++ MACRO(_STRING_ESCAPE var str) > ++ # ';' and '\' are tricky, need to be encoded. > ++ # '#' => '#H' > ++ # '\' => '#B' > ++ # ';' => '#S' > ++ SET(_NOESCAPE_SEMICOLON "") > ++ SET(_NOESCAPE_HASH "") > ++ > ++ FOREACH(_arg ${ARGN}) > ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") > ++ ELSEIF(${_arg} STREQUAL "NOESCAPE_HASH") > ++ SET(_NOESCAPE_HASH "NOESCAPE_HASH") > ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ ENDFOREACH(_arg ${ARGN}) > ++ > ++ IF(_NOESCAPE_HASH STREQUAL "") > ++ STRING(REGEX REPLACE "#" "#H" _ret "${str}") > ++ ELSE(_NOESCAPE_HASH STREQUAL "") > ++ SET(_ret "${str}") > ++ ENDIF(_NOESCAPE_HASH STREQUAL "") > ++ > ++ STRING(REGEX REPLACE "\\\\" "#B" _ret "${_ret}") > ++ IF(_NOESCAPE_SEMICOLON STREQUAL "") > ++ STRING(REGEX REPLACE ";" "#S" _ret "${_ret}") > ++ ENDIF(_NOESCAPE_SEMICOLON STREQUAL "") > ++ #MESSAGE("_STRING_ESCAPE:_ret=${_ret}") > ++ SET(${var} "${_ret}") > ++ ENDMACRO(_STRING_ESCAPE var str) > ++ > ++ MACRO(_STRING_UNESCAPE var str) > ++ # '#B' => '\' > ++ # '#H' => '#' > ++ # '#D' => '$' > ++ # '#S' => ';' > ++ SET(_ESCAPE_VARIABLE "") > ++ SET(_NOESCAPE_SEMICOLON "") > ++ SET(_ret "${str}") > ++ FOREACH(_arg ${ARGN}) > ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") > ++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE") > ++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE") > ++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}") > ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ ENDFOREACH(_arg ${ARGN}) > ++ #MESSAGE("###_STRING_UNESCAPE: var=${var} _ret=${_ret} _NOESCAPE_SEMICOLON=${_NOESCAPE_SEMICOLON} ESCAPE_VARIABLE=${_ESCAPE_VARIABLE}") > ++ > ++ STRING(REGEX REPLACE "#B" "\\\\" _ret "${_ret}") > ++ IF("${_NOESCAPE_SEMICOLON}" STREQUAL "") > ++ # ESCAPE_SEMICOLON > ++ STRING(REGEX REPLACE "#S" "\\\\;" _ret "${_ret}") > ++ ELSE("${_NOESCAPE_SEMICOLON}" STREQUAL "") > ++ # Don't ESCAPE_SEMICOLON > ++ STRING(REGEX REPLACE "#S" ";" _ret "${_ret}") > ++ ENDIF("${_NOESCAPE_SEMICOLON}" STREQUAL "") > ++ > ++ IF(NOT _ESCAPE_VARIABLE STREQUAL "") > ++ # '#D' => '$' > ++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}") > ++ ENDIF(NOT _ESCAPE_VARIABLE STREQUAL "") > ++ STRING(REGEX REPLACE "#H" "#" _ret "${_ret}") > ++ SET(${var} "${_ret}") > ++ #MESSAGE("*** _STRING_UNESCAPE: ${var}=${${var}}") > ++ ENDMACRO(_STRING_UNESCAPE var str) > ++ > ++ MACRO(STRING_UNQUOTE var str) > ++ SET(_ret "${str}") > ++ STRING(LENGTH "${str}" _strLen) > ++ > ++ # IF _strLen > 1 > ++ # IF lCh and rCh are both "\"" > ++ # Remove _lCh and _rCh > ++ # ELSEIF lCh and rCh are both "'" > ++ # Remove _lCh and _rCh > ++ # Otherwise don't touch > ++ IF(_strLen GREATER 1) > ++ STRING(SUBSTRING "${str}" 0 1 _lCh) > ++ MATH(EXPR _strLen_1 ${_strLen}-1) > ++ MATH(EXPR _strLen_2 ${_strLen_1}-1) > ++ STRING(SUBSTRING "${str}" ${_strLen_1} 1 _rCh) > ++ #MESSAGE("_lCh=${_lCh} _rCh=${_rCh} _ret=|${_ret}|") > ++ IF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"") > ++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret) > ++ ELSEIF("${_lCh}" STREQUAL "'" AND "${_rCh}" STREQUAL "'") > ++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret) > ++ ENDIF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"") > ++ ENDIF (_strLen GREATER 1) > ++ SET(${var} "${_ret}") > ++ ENDMACRO(STRING_UNQUOTE var str) > ++ > ++ MACRO(STRING_JOIN var delimiter str_list) > ++ SET(_ret "") > ++ FOREACH(_str ${str_list}) > ++ IF(_ret STREQUAL "") > ++ SET(_ret "${_str}") > ++ ELSE(_ret STREQUAL "") > ++ SET(_ret "${_ret}${delimiter}${_str}") > ++ ENDIF(_ret STREQUAL "") > ++ ENDFOREACH(_str ${str_list}) > ++ > ++ FOREACH(_str ${ARGN}) > ++ IF(_ret STREQUAL "") > ++ SET(_ret "${_str}") > ++ ELSE(_ret STREQUAL "") > ++ SET(_ret "${_ret}${delimiter}${_str}") > ++ ENDIF(_ret STREQUAL "") > ++ ENDFOREACH(_str ${ARGN}) > ++ SET(${var} "${_ret}") > ++ ENDMACRO(STRING_JOIN var delimiter str_list) > ++ > ++ FUNCTION(STRING_FIND var str search_str) > ++ STRING(LENGTH "${str}" _str_len) > ++ STRING(LENGTH "${search_str}" _search_len) > ++ MATH(EXPR _str_end ${_str_len}-${_search_len}+1) > ++ > ++ SET(_index 0) > ++ SET(_str_remain "") > ++ SET(_result -1) > ++ WHILE(_index LESS _str_end) > ++ STRING(SUBSTRING "${str}" ${_index} ${_search_len} _str_window) > ++ IF("${_str_window}" STREQUAL "${search_str}") > ++ SET(_result ${_index}) > ++ BREAK() > ++ ELSE("${_str_window}" STREQUAL "${search_str}") > ++ MATH(EXPR _index ${_index}+1) > ++ ENDIF("${_str_window}" STREQUAL "${search_str}") > ++ ENDWHILE(_index LESS _str_end) > ++ SET(${var} ${_result} PARENT_SCOPE) > ++ ENDFUNCTION(STRING_FIND var str search) > ++ > ++ FUNCTION(STRING_SPLIT_2 var str_remain delimiter str) > ++ STRING_FIND(_index "${str}" "${delimiter}") > ++ IF(_index EQUAL -1) > ++ SET(${var} "${str}" PARENT_SCOPE) > ++ SET(${str_remain} "" PARENT_SCOPE) > ++ ELSE(_index EQUAL -1) > ++ STRING(SUBSTRING "${str}" 0 ${_index} _var) > ++ SET(${var} "${_var}" PARENT_SCOPE) > ++ > ++ STRING(LENGTH "${str}" _str_len) > ++ STRING(LENGTH "${delimiter}" _delimiter_len) > ++ MATH(EXPR _str_2_start ${_index}+${_delimiter_len}) > ++ MATH(EXPR _str_2_len ${_str_len}-${_index}-${_delimiter_len}) > ++ STRING(SUBSTRING "${str}" ${_str_2_start} ${_str_2_len} _str_remain) > ++ SET(${str_remain} "${_str_remain}" PARENT_SCOPE) > ++ ENDIF(_index EQUAL -1) > ++ ENDFUNCTION(STRING_SPLIT_2 var str_remain delimiter str) > ++ > ++ MACRO(STRING_SPLIT var delimiter str) > ++ #MESSAGE("***STRING_SPLIT: var=${var} str=${str}") > ++ SET(_max_tokens "") > ++ SET(_NOESCAPE_SEMICOLON "") > ++ SET(_ESCAPE_VARIABLE "") > ++ FOREACH(_arg ${ARGN}) > ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") > ++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE") > ++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE") > ++ ELSE(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ SET(_max_tokens ${_arg}) > ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ ENDFOREACH(_arg ${ARGN}) > ++ > ++ IF(NOT _max_tokens) > ++ SET(_max_tokens -1) > ++ ENDIF(NOT _max_tokens) > ++ > ++ _STRING_ESCAPE(_str "${str}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) > ++ _STRING_ESCAPE(_delimiter "${delimiter}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) > ++ SET(_str_list "") > ++ SET(_token_count 1) > ++ > ++ WHILE(NOT _token_count EQUAL _max_tokens) > ++ STRING_SPLIT_2(_token _str "${_delimiter}" "${_str}") > ++ #MESSAGE("_token_count=${_token_count} _max_tokens=${_max_tokens} _token=${_token} _str=${_str}") > ++ MATH(EXPR _token_count ${_token_count}+1) > ++ LIST(APPEND _str_list "${_token}") > ++ IF("${_str}" STREQUAL "") > ++ ## No more tokens > ++ BREAK() > ++ ENDIF("${_str}" STREQUAL "") > ++ ENDWHILE(NOT _token_count EQUAL _max_tokens) > ++ > ++ IF(NOT "x${_str}" STREQUAL "x") > ++ ## Append last part > ++ LIST(APPEND _str_list "${_str}") > ++ ENDIF(NOT "x${_str}" STREQUAL "x") > ++ > ++ # Unencoding > ++ _STRING_UNESCAPE(${var} "${_str_list}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) > ++ #MESSAGE("***STRING_SPLIT: tokens=${${var}}") > ++ ENDMACRO(STRING_SPLIT var delimiter str) > ++ > ++ENDIF(NOT DEFINED _MANAGE_STRING_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageTarget.cmake > +@@ -0,0 +1,40 @@ > ++# - Modules for managing targets and outputs. > ++# > ++# Defines following macros: > ++# ADD_CUSTOM_TARGET_COMMAND(target OUTPUT file1 [file2 ..] COMMAND > ++# command1 ...) > ++# - Combine ADD_CUSTOM_TARGET and ADD_CUSTOM_COMMAND. > ++# Always build when making the target, also specify the output files > ++# Arguments: > ++# + target: target for this command > ++# + file1, file2 ... : Files to be outputted by this command > ++# + command1 ... : Command to be run. The rest arguments are same with > ++# ADD_CUSTOM_TARGET. > ++# > ++ > ++IF(NOT DEFINED _MANAGE_TARGET_CMAKE_) > ++ SET(_MANAGE_TARGET_CMAKE_ "DEFINED") > ++ MACRO(ADD_CUSTOM_TARGET_COMMAND target OUTPUT) > ++ SET(_outputFileList "") > ++ SET(_optionList "") > ++ SET(_outputFileMode 1) > ++ FOREACH(_t ${ARGN}) > ++ IF(_outputFileMode) > ++ IF(_t STREQUAL "COMMAND") > ++ SET(_outputFileMode 0) > ++ LIST(APPEND _optionList "${_t}") > ++ ELSE(_t STREQUAL "COMMAND") > ++ LIST(APPEND _outputFileList "${_t}") > ++ ENDIF(_t STREQUAL "COMMAND") > ++ ELSE(_outputFileMode) > ++ LIST(APPEND _optionList "${_t}") > ++ ENDIF(_outputFileMode) > ++ ENDFOREACH(_t ${ARGN}) > ++ #MESSAGE("ADD_CUSTOM_TARGET(${target} ${_optionList})") > ++ ADD_CUSTOM_TARGET(${target} ${_optionList}) > ++ #MESSAGE("ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList})") > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList}) > ++ ENDMACRO(ADD_CUSTOM_TARGET_COMMAND) > ++ > ++ENDIF(NOT DEFINED _MANAGE_TARGET_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageTranslation.cmake > +@@ -0,0 +1,305 @@ > ++# - Software Translation support > ++# This module supports software translation by: > ++# 1) Creates gettext related targets. > ++# 2) Communicate to Zanata servers. > ++# > ++# Defines following targets: > ++# + translations: Make the translation files. > ++# This target itself does nothing but provide a target for others to > ++# depend on. > ++# If macro MANAGE_GETTEXT is used, then it depends on the target gmo_files. > ++# > ++# Defines following variables: > ++# + XGETTEXT_OPTIONS_C: Usual xgettext options for C programs. > ++# > ++# Defines following macros: > ++# MANAGE_GETTEXT [ALL] SRCS src1 [src2 [...]] > ++# [LOCALES locale1 [locale2 [...]]] > ++# [POTFILE potfile] > ++# [XGETTEXT_OPTIONS xgettextOpt]] > ++# ) > ++# - Provide Gettext support like pot file generation and > ++# gmo file generation. > ++# You can specify supported locales with LOCALES ... > ++# or omit the locales to use all the po files. > ++# > ++# Arguments: > ++# + ALL: (Optional) make target "all" depends on gettext targets. > ++# + SRCS src1 [src2 [...]]: File list of source code that contains msgid. > ++# + LOCALES locale1 [local2 [...]]:(optional) Locale list to be generated. > ++# Currently, only the format: lang_Region (such as fr_FR) is supported. > ++# + POTFILE potFile: (optional) pot file to be referred. > ++# Default: ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot > ++# + XGETTEXT_OPTIONS xgettextOpt: (optional) xgettext_options. > ++# Default: ${XGETTEXT_OPTIONS_C} > ++# Defines following variables: > ++# + GETTEXT_MSGMERGE_CMD: the full path to the msgmerge tool. > ++# + GETTEXT_MSGFMT_CMD: the full path to the msgfmt tool. > ++# + XGETTEXT_CMD: the full path to the xgettext. > ++# Targets: > ++# + pot_file: Generate the pot_file. > ++# + gmo_files: Converts input po files into the binary output mo files. > ++# > ++# MANAGE_ZANATA(serverUrl [YES]) > ++# - Use Zanata (was flies) as translation service. > ++# Arguments: > ++# + serverUrl: The URL of Zanata server > ++# + YES: Assume yes for all questions. > ++# Reads following variables: > ++# + ZANATA_XML_FILE: Path to zanata.xml > ++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml > ++# + ZANATA_INI_FILE: Path to zanata.ini > ++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml > ++# + ZANATA_PUSH_OPTIONS: Options for zanata push > ++# + ZANATA_PULL_OPTIONS: Options for zanata pull > ++# Targets: > ++# + zanata_project_create: Create project with PROJECT_NAME in zanata > ++# server. > ++# + zanata_version_create: Create version PRJ_VER in zanata server. > ++# + zanata_push: Push source messages to zanata server > ++# + zanata_push_trans: Push source messages and translations to zanata server. > ++# + zanata_pull: Pull translations from zanata server. > ++# > ++ > ++ > ++IF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_) > ++ SET(_MANAGE_TRANSLATION_CMAKE_ "DEFINED") > ++ SET(XGETTEXT_OPTIONS_C > ++ --language=C --keyword=_ --keyword=N_ --keyword=C_:1c,2 --keyword=NC_:1c,2 -s > ++ --package-name=${PROJECT_NAME} --package-version=${PRJ_VER}) > ++ SET(MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS "--indent" "--update" "--backup=none" CACHE STRING "msgmerge options") > ++ SET_DIRECTORY_PROPERTIES(PROPERTIES CLEAN_NO_CUSTOM "1") > ++ > ++ INCLUDE(ManageMessage) > ++ IF(NOT TARGET translations) > ++ ADD_CUSTOM_TARGET(translations > ++ COMMENT "Making translations" > ++ ) > ++ ENDIF(NOT TARGET translations) > ++ > ++ #======================================== > ++ # GETTEXT support > ++ > ++ MACRO(MANAGE_GETTEXT_INIT) > ++ FIND_PROGRAM(XGETTEXT_CMD xgettext) > ++ IF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND") > ++ SET(_gettext_dependency_missing 1) > ++ M_MSG(${M_OFF} "xgettext not found! gettext support disabled.") > ++ ENDIF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND") > ++ > ++ FIND_PROGRAM(GETTEXT_MSGMERGE_CMD msgmerge) > ++ IF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND") > ++ SET(_gettext_dependency_missing 1) > ++ M_MSG(${M_OFF} "msgmerge not found! gettext support disabled.") > ++ ENDIF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND") > ++ > ++ FIND_PROGRAM(GETTEXT_MSGFMT_CMD msgfmt) > ++ IF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND") > ++ SET(_gettext_dependency_missing 1) > ++ M_MSG(${M_OFF} "msgfmt not found! gettext support disabled.") > ++ ENDIF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND") > ++ > ++ ENDMACRO(MANAGE_GETTEXT_INIT) > ++ > ++ FUNCTION(MANAGE_GETTEXT) > ++ SET(_gettext_dependency_missing 0) > ++ MANAGE_GETTEXT_INIT() > ++ IF(NOT _gettext_dependency_missing) > ++ SET(_stage "") > ++ SET(_all "") > ++ SET(_srcList "") > ++ SET(_srcList_abs "") > ++ SET(_localeList "") > ++ SET(_potFile "") > ++ SET(_xgettext_option_list "") > ++ FOREACH(_arg ${ARGN}) > ++ IF(_arg STREQUAL "ALL") > ++ SET(_all "ALL") > ++ ELSEIF(_arg STREQUAL "SRCS") > ++ SET(_stage "SRCS") > ++ ELSEIF(_arg STREQUAL "LOCALES") > ++ SET(_stage "LOCALES") > ++ ELSEIF(_arg STREQUAL "XGETTEXT_OPTIONS") > ++ SET(_stage "XGETTEXT_OPTIONS") > ++ ELSEIF(_arg STREQUAL "POTFILE") > ++ SET(_stage "POTFILE") > ++ ELSE(_arg STREQUAL "ALL") > ++ IF(_stage STREQUAL "SRCS") > ++ FILE(RELATIVE_PATH _relFile ${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/${_arg}) > ++ LIST(APPEND _srcList ${_relFile}) > ++ GET_FILENAME_COMPONENT(_absPoFile ${_arg} ABSOLUTE) > ++ LIST(APPEND _srcList_abs ${_absPoFile}) > ++ ELSEIF(_stage STREQUAL "LOCALES") > ++ LIST(APPEND _localeList ${_arg}) > ++ ELSEIF(_stage STREQUAL "XGETTEXT_OPTIONS") > ++ LIST(APPEND _xgettext_option_list ${_arg}) > ++ ELSEIF(_stage STREQUAL "POTFILE") > ++ SET(_potFile "${_arg}") > ++ ELSE(_stage STREQUAL "SRCS") > ++ M_MSG(${M_WARN} "MANAGE_GETTEXT: not recognizing arg ${_arg}") > ++ ENDIF(_stage STREQUAL "SRCS") > ++ ENDIF(_arg STREQUAL "ALL") > ++ ENDFOREACH(_arg ${ARGN}) > ++ > ++ # Default values > ++ IF(_xgettext_option_list STREQUAL "") > ++ SET(_xgettext_option_list ${XGETTEXT_OPTIONS_C}) > ++ ENDIF(_xgettext_option_list STREQUAL "") > ++ > ++ IF(_potFile STREQUAL "") > ++ SET(_potFile "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot") > ++ ENDIF(_potFile STREQUAL "") > ++ > ++ IF(NOT _localeList) > ++ FILE(GLOB _poFiles "*.po") > ++ FOREACH(_poFile ${_poFiles}) > ++ GET_FILENAME_COMPONENT(_locale "${_poFile}" NAME_WE) > ++ LIST(APPEND _localeList "${_locale}") > ++ ENDFOREACH(_poFile ${_poFiles}) > ++ ENDIF(NOT _localeList) > ++ > ++ M_MSG(${M_INFO2} "XGETTEXT=${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList}") > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_potFile} > ++ COMMAND ${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList} > ++ DEPENDS ${_srcList_abs} > ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} > ++ COMMENT "Extract translatable messages to ${_potFile}" > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(pot_file ${_all} > ++ DEPENDS ${_potFile} > ++ ) > ++ > ++ ### Generating gmo files > ++ SET(_gmoFileList "") > ++ SET(_absGmoFileList "") > ++ SET(_absPoFileList "") > ++ GET_FILENAME_COMPONENT(_potBasename ${_potFile} NAME_WE) > ++ GET_FILENAME_COMPONENT(_potDir ${_potFile} PATH) > ++ GET_FILENAME_COMPONENT(_absPotFile ${_potFile} ABSOLUTE) > ++ GET_FILENAME_COMPONENT(_absPotDir ${_absPotFile} PATH) > ++ FOREACH(_locale ${_localeList}) > ++ SET(_absGmoFile ${_absPotDir}/${_locale}.gmo) > ++ SET(_absPoFile ${_absPotDir}/${_locale}.po) > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_absPoFile} > ++ COMMAND ${GETTEXT_MSGMERGE_CMD} > ++ ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile} > ++ DEPENDS ${_potFile} > ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} > ++ COMMENT "${GETTEXT_MSGMERGE_CMD} ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile}" > ++ ) > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_absGmoFile} > ++ COMMAND ${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile} > ++ DEPENDS ${_absPoFile} > ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} > ++ COMMENT "${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile}" > ++ ) > ++ > ++ #MESSAGE("_absPoFile=${_absPoFile} _absPotDir=${_absPotDir} _lang=${_lang} curr_bin=${CMAKE_CURRENT_BINARY_DIR}") > ++ INSTALL(FILES ${_absGmoFile} DESTINATION share/locale/${_locale}/LC_MESSAGES RENAME ${_potBasename}.mo) > ++ LIST(APPEND _absGmoFileList ${_absGmoFile}) > ++ LIST(APPEND _absPoFileList ${_absPoFile}) > ++ ENDFOREACH(_locale ${_localeList}) > ++ SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES "${_absGmoFileList};${_potFile}" ) > ++ > ++ SET(MANAGE_TRANSLATION_GETTEXT_PO_FILES ${_absPoFileList} CACHE STRING "PO files") > ++ > ++ ADD_CUSTOM_TARGET(gmo_files ${_all} > ++ DEPENDS ${_absGmoFileList} > ++ COMMENT "Generate gmo files for translation" > ++ ) > ++ > ++ ADD_DEPENDENCIES(translations gmo_files) > ++ ENDIF(NOT _gettext_dependency_missing) > ++ ENDFUNCTION(MANAGE_GETTEXT) > ++ > ++ > ++ #======================================== > ++ # ZANATA support > ++ MACRO(MANAGE_ZANATA serverUrl) > ++ SET(ZANATA_SERVER "${serverUrl}") > ++ FIND_PROGRAM(ZANATA_CMD zanata) > ++ SET(_manage_zanata_dependencies_missing 0) > ++ IF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND") > ++ SET(_manage_zanata_dependencies_missing 1) > ++ M_MSG(${M_OFF} "zanata (python client) not found! zanata support disabled.") > ++ ENDIF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND") > ++ > ++ SET(ZANATA_XML_FILE "${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml" CACHE FILEPATH "zanata.xml") > ++ IF(NOT EXISTS "${ZANATA_XML_FILE}") > ++ SET(_manage_zanata_dependencies_missing 1) > ++ M_MSG(${M_OFF} "zanata.xml is not found! Zanata support disabled.") > ++ ENDIF(NOT EXISTS "${ZANATA_XML_FILE}") > ++ > ++ SET(ZANATA_INI_FILE "$ENV{HOME}/.config/zanata.ini" CACHE FILEPATH "zanata.ni") > ++ IF(NOT EXISTS "${ZANATA_INI_FILE}") > ++ SET(_manage_zanata_dependencies_missing 1) > ++ M_MSG(${M_OFF} "zanata.ini is not found! Zanata support disabled.") > ++ ENDIF(NOT EXISTS "${ZANATA_INI_FILE}") > ++ > ++ IF(NOT _manage_zanata_dependencies_missing) > ++ SET(_zanata_args --url "${ZANATA_SERVER}" > ++ --project-config "${ZANATA_XML_FILE}" --user-config "${ZANATA_INI_FILE}") > ++ > ++ # Parsing arguments > ++ SET(_yes "") > ++ FOREACH(_arg ${ARGN}) > ++ IF(_arg STREQUAL "YES") > ++ SET(_yes "yes" "|") > ++ ENDIF(_arg STREQUAL "YES") > ++ ENDFOREACH(_arg ${ARGN}) > ++ > ++ ADD_CUSTOM_TARGET(zanata_project_create > ++ COMMAND ${ZANATA_CMD} project create ${PROJECT_NAME} ${_zanata_args} > ++ --project-name "${PROJECT_NAME}" --project-desc "${PRJ_SUMMARY}" > ++ COMMENT "Creating project ${PROJECT_NAME} on Zanata server ${serverUrl}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(zanata_version_create > ++ COMMAND ${ZANATA_CMD} version create > ++ ${PRJ_VER} ${_zanata_args} --project-id "${PROJECT_NAME}" > ++ COMMENT "Creating version ${PRJ_VER} on Zanata server ${serverUrl}" > ++ VERBATIM > ++ ) > ++ > ++ SET(_po_files_depend "") > ++ IF(MANAGE_TRANSLATION_GETTEXT_PO_FILES) > ++ SET(_po_files_depend "DEPENDS" ${MANAGE_TRANSLATION_GETTEXT_PO_FILES}) > ++ ENDIF(MANAGE_TRANSLATION_GETTEXT_PO_FILES) > ++ # Zanata push > ++ ADD_CUSTOM_TARGET(zanata_push > ++ COMMAND ${_yes} > ++ ${ZANATA_CMD} push ${_zanata_args} ${ZANATA_PUSH_OPTIONS} > ++ ${_po_files_depend} > ++ COMMENT "Push source messages to zanata server ${ZANATA_SERVER}" > ++ VERBATIM > ++ ) > ++ ADD_DEPENDENCIES(zanata_push pot_file) > ++ > ++ # Zanata push with translation > ++ ADD_CUSTOM_TARGET(zanata_push_trans > ++ COMMAND ${_yes} > ++ ${ZANATA_CMD} push ${_zanata_args} --push-type both ${ZANATA_PUSH_OPTIONS} > ++ ${_po_files_depend} > ++ COMMENT "Push source messages and translations to zanata server ${ZANATA_SERVER}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_DEPENDENCIES(zanata_push_trans pot_file) > ++ > ++ # Zanata pull > ++ ADD_CUSTOM_TARGET(zanata_pull > ++ COMMAND ${_yes} > ++ ${ZANATA_CMD} pull ${_zanata_args} ${ZANATA_PULL_OPTIONS} > ++ COMMENT "Pull translations fro zanata server ${ZANATA_SERVER}" > ++ VERBATIM > ++ ) > ++ > ++ ENDIF(NOT _manage_zanata_dependencies_missing) > ++ ENDMACRO(MANAGE_ZANATA serverUrl) > ++ > ++ENDIF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageUninstall.cmake > +@@ -0,0 +1,28 @@ > ++# - Uninstall target. > ++# Use this module to provide uninstall target. > ++# > ++# Define following targets > ++# uninstall: For uninstalling the package. > ++# > ++ > ++IF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_) > ++ SET(_MANAGE_UNINSTALL_CMAKE_ "DEFINED") > ++ SET(CMAKE_UNINSTALL_IN_SEARCH_PATH ${CMAKE_MODULE_PATH} ${CMAKE_ROOT}/Modules ${CMAKE_SOURCE_DIR} ${CMAKE_SOURCE_DIR}/Modules) > ++ FIND_FILE(CMAKE_UNINSTALL_IN cmake_uninstall.cmake.in > ++ PATHS ${CMAKE_UNINSTALL_IN_SEARCH_PATH}) > ++ > ++ # MESSAGE("CMAKE_UNINSTALL_IN=${CMAKE_UNINSTALL_IN}") > ++ IF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND") > ++ MESSAGE(FATAL_ERROR "Cannot find cmake_uninstall.cmake.in in" > ++ "${CMAKE_UNINSTALL_IN_SEARCH_PATH}") > ++ ENDIF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND") > ++ > ++ CONFIGURE_FILE("${CMAKE_UNINSTALL_IN}" > ++ "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" > ++ IMMEDIATE @ONLY) > ++ > ++ ADD_CUSTOM_TARGET(uninstall > ++ "${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" > ++ ) > ++ENDIF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageUpload.cmake > +@@ -0,0 +1,184 @@ > ++# - Upload files to hosting services. > ++# You can either use sftp, scp or supply custom command for upload. > ++# The custom command should be in following format: > ++# cmd [OPTIONS] [url] > ++# > ++# This module defines following macros: > ++# MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias [uploadOptions]) > ++# - Make a target for upload files. > ++# If <varPrefix>_HOST_ALIAS is not empty, the target is > ++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias}, otherwise, the target is > ++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias} > ++# Arguments: > ++# + varPrefix: Variable prefix > ++# + fileAlias: File alias which will be used as part of target name > ++# + uploadOptions: Options for the upload command > ++# Reads following variables: > ++# + <varPrefix>_CMD: Upload command > ++# + <varPrefix>_DEPENDS: Extra files that the upload load target depends on. > ++# + <varPrefix>_HOST_ALIAS: (Optional) Host alias which will be used as part of target name. > ++# + <varPrefix>_HOST_URL: Host URL > ++# + <varPrefix>_REMOTE_DIR: (Optional) Remote dir/ > ++# + <varPrefix>_UPLOAD_FILES: Files to be uploaded. The target depends on these files. > ++# + <varPrefix>_UPLOAD_OPTIONS: Options for upload command. > ++# + <varPrefix>_USER: (Optional) User for uploading > ++# > ++# This module defines following macros: > ++# MANAGE_UPLOAD_CMD(cmd fileAlias [USER user] [HOST_URL hostUrl] > ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > ++# - Make a upload target for a upload command > ++# Arguments: > ++# + cmd: Command to do the > ++# + fileAlias: File alias which will be used as part of target name > ++# + DEPENDS files: Extra files that the upload load target depends on. > ++# + HOST_ALIAS hostAlias: (Optional) Host alias which will be used as part of target name. > ++# + HOST_URL hostUrl: Host URL > ++# + REMOTE_DIR remoteDir: (Optional) Remote dir/ > ++# + UPLOAD_FILES files : Files to be uploaded. The target depends on these files. > ++# + UPLOAD_OPTIONS options: Options for upload command. > ++# + USER user: (Optional) User for uploading > ++# > ++# MANAGE_UPLOAD_SFTP(fileAlias [USER user] [HOST_URL hostUrl] > ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > ++# - Make a upload target for sftp > ++# Arguments: See section MANAGE_UPLOAD_CMD > ++# > ++# MANAGE_UPLOAD_SCP(fileAlias [USER user] [HOST_URL hostUrl] > ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > ++# - Make a upload target for scp > ++# Arguments: See section MANAGE_UPLOAD_CMD > ++# > ++# MANAGE_UPLOAD_FEDORAHOSTED(fileAlias [USER user] > ++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > ++# - Make a upload target for uploading to FedoraHosted > ++# Arguments: See section MANAGE_UPLOAD_CMD > ++# > ++# MANAGE_UPLOAD_SOURCEFORGE(fileAlias [USER user] > ++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > ++# - Make a upload target for uploading to SourceForge > ++# Arguments: See section MANAGE_UPLOAD_CMD > ++# > ++# > ++ > ++IF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_) > ++ SET(_MANAGE_UPLOAD_CMAKE_ "DEFINED") > ++ INCLUDE(ManageMessage) > ++ > ++ # MANAGE_UPLOAD_GET_OPTIONS cmd [USER user] [HOST_URL hostUrl] [HOST_ALIAS hostAlias] > ++ # [UPLOAD_FILES files] [REMOTE_DIR remoteDir] [UPLOAD_OPTIONS sftpOptions] [DEPENDS files] > ++ > ++ MACRO(_MANAGE_UPLOAD_GET_OPTIONS varList varPrefix) > ++ SET(_optName "") ## OPTION name > ++ SET(_opt "") ## Variable that hold option values > ++ SET(VALID_OPTIONS "USER" "HOST_URL" "HOST_ALIAS" "UPLOAD_FILES" "REMOTE_DIR" "UPLOAD_OPTIONS" "DEPENDS") > ++ FOREACH(_arg ${ARGN}) > ++ LIST(FIND VALID_OPTIONS "${_arg}" _optIndex) > ++ IF(_optIndex EQUAL -1) > ++ IF(NOT _optName STREQUAL "") > ++ ## Append to existing variable > ++ LIST(APPEND ${_opt} "${_arg}") > ++ SET(${_opt} "${_opt}" PARENT_SCOPE) > ++ ENDIF(NOT _optName STREQUAL "") > ++ ELSE(_optIndex EQUAL -1) > ++ ## Obtain option name and variable name > ++ LIST(GET VALID_OPTIONS ${_optIndex} _optName) > ++ SET(_opt "${varPrefix}_${_optName}") > ++ > ++ ## If variable is not in varList, then set cache and add it to varList > ++ LIST(FIND ${varList} "${_opt}" _varIndex) > ++ IF(_varIndex EQUAL -1) > ++ SET(${_opt} "" PARENT_SCOPE) > ++ LIST(APPEND ${varList} "${_opt}") > ++ ENDIF(_varIndex EQUAL -1) > ++ ENDIF(_optIndex EQUAL -1) > ++ ENDFOREACH(_arg ${ARGN}) > ++ ENDMACRO(_MANAGE_UPLOAD_GET_OPTIONS varPrefix varList) > ++ > ++ MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias) > ++ SET(_target "upload") > ++ IF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "") > ++ SET(_target "${_target}_${${varPrefix}_HOST_ALIAS}") > ++ ENDIF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "") > ++ SET(_target "${_target}_${fileAlias}") > ++ > ++ ## Determine url for upload > ++ IF(NOT "${varPrefix}_HOST_URL" STREQUAL "") > ++ IF("${varPrefix}_USER" STREQUAL "") > ++ SET(UPLOAD_URL "${${varPrefix}_USER}@${${varPrefix}_HOST_URL}") > ++ ELSE("${varPrefix}_USER" STREQUAL "") > ++ SET(UPLOAD_URL "${${varPrefix}_HOST_URL}") > ++ ENDIF("${varPrefix}_USER" STREQUAL "") > ++ ELSE(NOT "${varPrefix}_HOST_URL" STREQUAL "") > ++ SET(UPLOAD_URL "") > ++ ENDIF(NOT "${varPrefix}_HOST_URL" STREQUAL "") > ++ > ++ IF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "") > ++ SET(UPLOAD_URL "${UPLOAD_URL}:${${varPrefix}_REMOTE_DIR}") > ++ ENDIF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "") > ++ > ++ ADD_CUSTOM_TARGET(${_target} > ++ COMMAND ${${varPrefix}_UPLOAD_CMD} ${${varPrefix}_UPLOAD_OPTIONS} ${ARGN} ${UPLOAD_URL} > ++ DEPENDS ${${varPrefix}_UPLOAD_FILES} ${${varPrefix}_DEPENDS} > ++ ${_DEPENDS} > ++ COMMENT "${${varPrefix}_HOST_ALIAS} uploading ${fileAlias}." > ++ VERBATIM > ++ ) > ++ ENDMACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias) > ++ > ++ FUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias) > ++ FIND_PROGRAM(UPLOAD_CMD "${cmd}") > ++ IF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with ${cmd} disabled.") > ++ ELSE(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") > ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "upload_${fileAlias}" ${ARGN}) > ++ SET(upload_UPLOAD_CMD ${UPLOAD_CMD}) > ++ MANAGE_UPLOAD_MAKE_TAGET("upload" "${fileAlias}") > ++ ENDIF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") > ++ ENDFUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias) > ++ > ++ FUNCTION(MANAGE_UPLOAD_SFTP fileAlias) > ++ MANAGE_UPLOAD_CMD(sftp ${fileAlias} ${ARGN}) > ++ ENDFUNCTION(MANAGE_UPLOAD_SFTP fileAlias) > ++ > ++ FUNCTION(MANAGE_UPLOAD_SCP fileAlias) > ++ MANAGE_UPLOAD_CMD(scp ${fileAlias} ${ARGN}) > ++ ENDFUNCTION(MANAGE_UPLOAD_SCP fileAlias) > ++ > ++ #MACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD) > ++ # FIND_PROGRAM(CURL_CMD curl) > ++ # IF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND") > ++ # MESSAGE(FATAL_ERROR "Need curl to perform google upload") > ++ # ENDIF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND") > ++ #ENDMACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD) > ++ FUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias) > ++ FIND_PROGRAM(fedorahosted_${fileAlias}_UPLOAD_CMD "scp") > ++ IF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with fedorahost disabled.") > ++ ELSE(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") > ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "fedorahosted_${fileAlias}" HOST_ALIAS "fedorahosted" > ++ HOST_URL "fedorahosted.org" REMOTE_DIR "${PROJECT_NAME}" ${ARGN}) > ++ MANAGE_UPLOAD_MAKE_TARGET("fedorahosted_${fileAlias}" "${fileAlias}" ${fedorahosted_${fileAlias}_UPLOAD_FILES}) > ++ ENDIF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") > ++ ENDFUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias) > ++ > ++ FUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias) > ++ FIND_PROGRAM(sourceforge_${fileAlias}_UPLOAD_CMD "sftp") > ++ IF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") > ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with sourceforge disabled.") > ++ ELSE(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") > ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "sourceforge_${fileAlias}" ${ARGN} HOST_ALIAS "sourceforge" > ++ HOST_URL "frs.sourceforge.net") > ++ IF(sourceforge_${fileAlias}_USER) > ++ SET(sourceforge_${fileAlias}_REMOTE_DIR "/home/frs/project/${PROJECT_NAME}") > ++ ENDIF(sourceforge_${fileAlias}_USER) > ++ SET("sourceforge_${fileAlias}_UPLOAD_CMD" "sftp") > ++ MANAGE_UPLOAD_MAKE_TARGET("sourceforge_${fileAlias}" "${fileAlias}") > ++ ENDIF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") > ++ ENDFUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias) > ++ENDIF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageVariable.cmake > +@@ -0,0 +1,326 @@ > ++# - Get or set variables from various sources. > ++# > ++# Includes: > ++# ManageString > ++# > ++# Included by: > ++# ManageVersion > ++# PackRPM > ++# > ++# Defines following functions: > ++# SETTING_STRING_GET_VARIABLE(var value str [NOUNQUOTE] [NOREPLACE] [setting_sign]) > ++# - Get a variable and a value from a setting in string format. > ++# i.e. VAR=Value > ++# pattern. '#' is used for comment. > ++# * Parameters: > ++# + var: Variable name extracted from str. > ++# + value: Value extracted from str > ++# + str: String to be extracted variable and value from. > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > ++# previous defined variables, use NOREPLACE to prevent this. > ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > ++# Default value: "=" > ++# > ++# Defines following macros: > ++# COMMAND_OUTPUT_TO_VARIABLE(var cmd) > ++# - Store command output to a variable, without new line characters (\n and \r). > ++# This macro is suitable for command that output one line result. > ++# Note that the var will be set to ${var_name}-NOVALUE if cmd does not have > ++# any output. > ++# * Parameters: > ++# var: A variable that stores the result. > ++# cmd: A command. > ++# > ++# SETTING_FILE_GET_VARIABLES_PATTERN(var attr_pattern setting_file [NOUNQUOTE] [NOREPLACE] > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > ++# - Get variable values from a setting file if their names matches given > ++# pattern. '#' is used for comment. > ++# * Parameters: > ++# + var: Variable to store the attribute value. > ++# Set to "" to set attribute under matched variable name. > ++# + attr_pattern: Regex pattern of variable name. > ++# + setting_file: Setting filename. > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > ++# previous defined variables, use NOREPLACE to prevent this. > ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > ++# Default value: "=" > ++# > ++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE] > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > ++# - Get all variable values from a setting file. > ++# It is equivalent to: > ++# SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_]*" > ++# "${setting_file}" ${ARGN}) > ++# '#' is used to comment out setting. > ++# * Parameters: > ++# + setting_file: Setting filename. > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > ++# previous defined variables, use NOREPLACE to prevent this. > ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > ++# Default value: "=" > ++# > ++# SETTING_FILE_GET_VARIABLE(var attr_name setting_file [NOUNQUOTE] [NOREPLACE] > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > ++# - Get a variable value from a setting file. > ++# It is equivalent to: > ++# SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}" > ++# "${setting_file}" ${ARGN}) > ++# '#' is used to comment out setting. > ++# * Parameters: > ++# + var: Variable to store the attribute value. > ++# + attr_name: Name of the variable. > ++# + setting_file: Setting filename. > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > ++# previous defined variables, use NOREPLACE to prevent this. > ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > ++# Default value: "=" > ++# > ++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE] > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > ++# - Get all attribute values from a setting file. > ++# '#' is used to comment out setting. > ++# * Parameters: > ++# + setting_file: Setting filename. > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > ++# previous defined variables, use NOREPLACE to prevent this. > ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > ++# Default value: "=" > ++# > ++# GET_ENV(var default_value [env]) > ++# - Get the value of a environment variable, or use default > ++# if the environment variable does not exist or is empty. > ++# * Parameters: > ++# var: Variable to be set > ++# default_value: Default value of the var > ++# env: (Optional) The name of environment variable. Only need if different from var. > ++# > ++# SET_VAR(var untrimmed_value) > ++# - Trim an set the value to a variable. > ++# * Parameters: > ++# var: Variable to be set > ++# untrimmed_value: Untrimmed values that may have space, \t, \n, \r in the front or back of the string. > ++# > ++ > ++IF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_) > ++ SET(_MANAGE_VARIABLE_CMAKE_ "DEFINED") > ++ INCLUDE(ManageString) > ++ > ++ MACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd) > ++ EXECUTE_PROCESS( > ++ COMMAND ${cmd} ${ARGN} > ++ OUTPUT_VARIABLE _cmd_output > ++ OUTPUT_STRIP_TRAILING_WHITESPACE > ++ ) > ++ IF(_cmd_output) > ++ SET(${var} ${_cmd_output}) > ++ ELSE(_cmd_output) > ++ SET(var "${var}-NOVALUE") > ++ ENDIF(_cmd_output) > ++ #SET(value ${${var}}) > ++ #MESSAGE("var=${var} _cmd_output=${_cmd_output} value=|${value}|" ) > ++ ENDMACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd) > ++ > ++ # This macro is meant to be internal. > ++ MACRO(_MANAGE_VARIABLE_SET var value) > ++ SET(${var} "${value}") > ++ ENDMACRO(_MANAGE_VARIABLE_SET var value) > ++ > ++ # it deals the "encoded" line. > ++ FUNCTION(SETTING_STRING_GET_VARIABLE var value str ) > ++ SET(setting_sign "=") > ++ SET(_NOUNQUOTE "") > ++ SET(_NOREPLACE "") > ++ FOREACH(_arg ${ARGN}) > ++ IF (${_arg} STREQUAL "NOUNQUOTE") > ++ SET(_NOUNQUOTE "NOUNQUOTE") > ++ ELSEIF (${_arg} STREQUAL "NOREPLACE") > ++ SET(_NOREPLACE "NOREPLACE") > ++ ELSE(${_arg} STREQUAL "NOUNQUOTE") > ++ SET(setting_sign ${_arg}) > ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") > ++ ENDFOREACH(_arg ${ARGN}) > ++ > ++ STRING_SPLIT(_tokens "${setting_sign}" "${str}" 2) > ++ #MESSAGE("_tokens=${_tokens}") > ++ SET(_varName "") > ++ SET(_val "") > ++ FOREACH(_token ${_tokens}) > ++ #MESSAGE("_varName=${_varName} _token=${_token}") > ++ IF(_varName STREQUAL "") > ++ SET(_varName "${_token}") > ++ ELSE(_varName STREQUAL "") > ++ SET(_val "${_token}") > ++ ENDIF(_varName STREQUAL "") > ++ ENDFOREACH(_token ${_tokens}) > ++ #MESSAGE("_varName=${_varName} _val=${_val}") > ++ > ++ SET(${var} "${_varName}" PARENT_SCOPE) > ++ # Set var when > ++ # 1. NOREPLACE is not set, or > ++ # 2. var has value already. > ++ SET(_setVar 0) > ++ IF(_NOREPLACE STREQUAL "") > ++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE}) > ++ ELSEIF(${var} STREQUAL "") > ++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE}) > ++ ELSE(_NOREPLACE STREQUAL "") > ++ SET(_value "${${var}}") > ++ ENDIF(_NOREPLACE STREQUAL "") > ++ SET(${value} "${_value}" PARENT_SCOPE) > ++ #MESSAGE("_varName=${_varName} _value=${_value}") > ++ > ++ ENDFUNCTION(SETTING_STRING_GET_VARIABLE var str) > ++ > ++ # Internal macro > ++ # Similar to STRING_ESCAPE, but read directly from file, > ++ # This avoid the variable substitution > ++ # Variable escape is enforced. > ++ MACRO(FILE_READ_ESCAPE var filename) > ++ # '$' is very tricky. > ++ # '$' => '#D' > ++ GET_FILENAME_COMPONENT(_filename_abs "${filename}" ABSOLUTE) > ++ EXECUTE_PROCESS(COMMAND cat ${filename} > ++ COMMAND sed -e "s/#/#H/g" > ++ COMMAND sed -e "s/[$]/#D/g" > ++ COMMAND sed -e "s/;/#S/g" > ++ COMMAND sed -e "s/[\\]/#B/g" > ++ OUTPUT_VARIABLE _ret > ++ OUTPUT_STRIP_TRAILING_WHITESPACE) > ++ > ++ STRING(REGEX REPLACE "\n" ";" _ret "${_ret}") > ++ #MESSAGE("_ret=|${_ret}|") > ++ SET(${var} "${_ret}") > ++ ENDMACRO(FILE_READ_ESCAPE var filename) > ++ > ++ MACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file) > ++ IF("${setting_file}" STREQUAL "") > ++ M_MSG(${M_FATAL} "SETTING_FILE_GET_VARIABLES_PATTERN: setting_file ${setting_file} is empty") > ++ ENDIF("${setting_file}" STREQUAL "") > ++ SET(setting_sign "=") > ++ SET(_noUnQuoted "") > ++ SET(_noEscapeSemicolon "") > ++ SET(_noReplace "") > ++ SET(_escapeVariable "") > ++ FOREACH(_arg ${ARGN}) > ++ IF (${_arg} STREQUAL "NOUNQUOTE") > ++ SET(_noUnQuoted "NOUNQUOTE") > ++ ELSEIF (${_arg} STREQUAL "NOREPLACE") > ++ SET(_noReplace "NOREPLACE") > ++ ELSEIF (${_arg} STREQUAL "NOESCAPE_SEMICOLON") > ++ SET(_noEscapeSemicolon "NOESCAPE_SEMICOLON") > ++ ELSEIF (${_arg} STREQUAL "ESCAPE_VARIABLE") > ++ SET(_escapeVariable "ESCAPE_VARIABLE") > ++ ELSE(${_arg} STREQUAL "NOUNQUOTE") > ++ SET(setting_sign ${_arg}) > ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") > ++ ENDFOREACH(_arg) > ++ > ++ # Escape everything to be safe. > ++ FILE_READ_ESCAPE(_lines "${setting_file}") > ++ > ++ #STRING_SPLIT(_lines "\n" "${_txt_content}") > ++ #MESSAGE("_lines=|${_lines}|") > ++ SET(_actual_line "") > ++ SET(_join_next 0) > ++ FOREACH(_line ${_lines}) > ++ #MESSAGE("_line=|${_line}|") > ++ IF(NOT _line MATCHES "^[ \\t]*#H") > ++ # Not a comment line. > ++ IF(_join_next EQUAL 1) > ++ SET(_actual_line "${_actual_line}${_line}" ) > ++ ELSE(_join_next EQUAL 1) > ++ SET(_actual_line "${_line}") > ++ ENDIF(_join_next EQUAL 1) > ++ #MESSAGE("_actual_line=|${_actual_line}|") > ++ > ++ IF(_actual_line MATCHES "#B$") > ++ #Join the lines that end with \\ > ++ SET(_join_next 1) > ++ STRING(REGEX REPLACE "#B$" "" _actual_line "${_actual_line}") > ++ ELSE(_actual_line MATCHES "#B$") > ++ SET(_join_next 0) > ++ IF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}") > ++ #MESSAGE("*** matched_line=|${_actual_line}|") > ++ SETTING_STRING_GET_VARIABLE(_attr _value > ++ "${_actual_line}" ${setting_sign} ${_noUnQuoted} ) > ++ #MESSAGE("*** _attr=${_attr} _value=${_value}") > ++ IF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr}) > ++ # Unencoding > ++ _STRING_UNESCAPE(_value "${_value}" ${_noEscapeSemicolon} ESCAPE_VARIABLE) > ++ IF(_escapeVariable STREQUAL "") > ++ # Variable should not be escaped > ++ # i.e. need substitution > ++ _MANAGE_VARIABLE_SET(_value "${_value}") > ++ ENDIF(_escapeVariable STREQUAL "") > ++ IF("${var}" STREQUAL "") > ++ SET(${_attr} "${_value}") > ++ ELSE("${var}" STREQUAL "") > ++ SET(${var} "${_value}") > ++ ENDIF("${var}" STREQUAL "") > ++ ENDIF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr}) > ++ ENDIF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}") > ++ > ++ ENDIF(_actual_line MATCHES "#B$") > ++ > ++ ENDIF(NOT _line MATCHES "^[ \\t]*#H") > ++ ENDFOREACH(_line ${_lines}) > ++ #SET(${var} "${_value}") > ++ > ++ ENDMACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file) > ++ > ++ MACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file) > ++ SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}" > ++ "${setting_file}" ${ARGN}) > ++ ENDMACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file) > ++ > ++ MACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file) > ++ SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_.]*" > ++ "${setting_file}" ${ARGN}) > ++ ENDMACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file) > ++ > ++ MACRO(GET_ENV var default_value) > ++ IF(${ARGC} GREATER 2) > ++ SET(_env "${ARGV2}") > ++ ELSE(${ARGC} GREATER 2) > ++ SET(_env "${var}") > ++ ENDIF(${ARGC} GREATER 2) > ++ > ++ IF ("$ENV{${_env}}" STREQUAL "") > ++ SET(${var} "${default_value}") > ++ ELSE("$ENV{${_env}}" STREQUAL "") > ++ SET(${var} "$ENV{${_env}}") > ++ ENDIF("$ENV{${_env}}" STREQUAL "") > ++ # MESSAGE("Variable ${var}=${${var}}") > ++ ENDMACRO(GET_ENV var default_value) > ++ > ++ MACRO(SET_VAR var untrimmedValue) > ++ SET(_noUnQuoted "") > ++ FOREACH(_arg ${ARGN}) > ++ IF (${_arg} STREQUAL "NOUNQUOTE") > ++ SET(_noUnQuoted "NOUNQUOTE") > ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") > ++ ENDFOREACH(_arg ${ARGN}) > ++ #MESSAGE("untrimmedValue=${untrimmedValue}") > ++ IF ("${untrimmedValue}" STREQUAL "") > ++ SET(${var} "") > ++ ELSE("${untrimmedValue}" STREQUAL "") > ++ STRING_TRIM(trimmedValue "${untrimmedValue}" ${_noUnQuoted}) > ++ #MESSAGE("***SET_VAR: trimmedValue=${trimmedValue}") > ++ SET(${var} "${trimmedValue}") > ++ ENDIF("${untrimmedValue}" STREQUAL "") > ++ #SET(value "${${var}}") > ++ #MESSAGE("***SET_VAR: ${var}=|${value}|") > ++ ENDMACRO(SET_VAR var untrimmedValue) > ++ > ++ENDIF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/ManageVersion.cmake > +@@ -0,0 +1,137 @@ > ++# - Modules for manipulate version and ChangeLogs > ++# > ++# Includes: > ++# ManageVariable > ++# DateTimeFormat > ++# > ++# Included by: > ++# PackSource > ++# > ++# Defines following functions: > ++# RELEASE_NOTES_READ_FILE([releaseFile]) > ++# - Load release file information. > ++# Arguments: > ++# + releaseFile: (Optional) release file to be read. > ++# This file should contain following definition: > ++# + PRJ_VER: Release version. > ++# + SUMMARY: Summary of the release. Will be output as CHANGE_SUMMARY. > ++# and a [Changes] section tag, below which listed the change in the > ++# release. > ++# Default:RELEASE-NOTES.txt > ++# This macro reads or define following variables: > ++# + RELEASE_TARGETS: Sequence of release targets. > ++# This macro outputs following files: > ++# + ChangeLog: Log of changes. > ++# Depends on ChangeLog.prev and releaseFile. > ++# This macro sets following variables: > ++# + PRJ_VER: Release version. > ++# + CHANGE_SUMMARY: Summary of changes. > ++# + CHANGELOG_ITEMS: Lines below the [Changes] tag. > ++# + RELEASE_NOTES_FILE: The loaded release file. > ++# + PRJ_DOC_DIR: Documentation for the project. > ++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER} > ++# > ++# > ++ > ++IF(NOT DEFINED _MANAGE_VERSION_CMAKE_) > ++ SET(_MANAGE_VERSION_CMAKE_ "DEFINED") > ++ INCLUDE(ManageMessage) > ++ INCLUDE(ManageVariable) > ++ > ++ SET(CHANGELOG_FILE "${CMAKE_BINARY_DIR}/ChangeLog" CACHE FILEPATH > ++ "ChangeLog") > ++ SET(CHANGELOG_PREV_FILE "${CMAKE_SOURCE_DIR}/ChangeLog.prev" CACHE FILEPATH > ++ "ChangeLog.prev") > ++ > ++ ADD_CUSTOM_TARGET(changelog_prev_update > ++ COMMAND ${CMAKE_COMMAND} -E copy ${CHANGELOG_FILE} ${CHANGELOG_PREV_FILE} > ++ DEPENDS ${CHANGELOG_FILE} > ++ COMMENT "${CHANGELOG_FILE} are saving as ${CHANGELOG_PREV_FILE}" > ++ ) > ++ > ++ FUNCTION(RELEASE_NOTES_READ_FILE) > ++ FOREACH(_arg ${ARGN}) > ++ IF(EXISTS ${_arg}) > ++ SET(RELEASE_NOTES_FILE ${_arg} CACHE FILEPATH "Release File") > ++ ENDIF(EXISTS ${_arg}) > ++ ENDFOREACH(_arg ${ARGN}) > ++ > ++ IF(NOT RELEASE_NOTES_FILE) > ++ SET(RELEASE_NOTES_FILE "RELEASE-NOTES.txt" CACHE FILEPATH "Release Notes") > ++ ENDIF(NOT RELEASE_NOTES_FILE) > ++ > ++ FILE(STRINGS "${RELEASE_NOTES_FILE}" _release_lines) > ++ > ++ SET(_changeItemSection 0) > ++ SET(_changeItems "") > ++ ## Parse release file > ++ FOREACH(_line ${_release_lines}) > ++ IF(_changeItemSection) > ++ ### Append lines in change section > ++ IF(_changeItems) > ++ SET(_changeItems "${_changeItems}\n${_line}") > ++ ELSE(_changeItems) > ++ SET(_changeItems "${_line}") > ++ ENDIF(_changeItems) > ++ ELSEIF("${_line}" MATCHES "^[[]Changes[]]") > ++ ### Start the change section > ++ SET(_changeItemSection 1) > ++ ELSE(_changeItemSection) > ++ ### Variable Setting section > ++ SETTING_STRING_GET_VARIABLE(var value "${_line}") > ++ #MESSAGE("var=${var} value=${value}") > ++ IF(NOT var MATCHES "#") > ++ IF(var STREQUAL "PRJ_VER") > ++ SET_COMPILE_ENV(${var} "${value}" CACHE STRING "Project Version" FORCE) > ++ ELSEIF(var STREQUAL "SUMMARY") > ++ SET(CHANGE_SUMMARY "${value}" CACHE STRING "Change Summary" FORCE) > ++ ELSE(var STREQUAL "PRJ_VER") > ++ SET(${var} "${value}" CACHE STRING "${var}" FORCE) > ++ ENDIF(var STREQUAL "PRJ_VER") > ++ ENDIF(NOT var MATCHES "#") > ++ ENDIF(_changeItemSection) > ++ ENDFOREACH(_line ${_release_line}) > ++ > ++ IF(_changeSection EQUAL 0) > ++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have a [Changes] tag!") > ++ ELSEIF("${_changeItems}" STREQUAL "") > ++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have ChangeLog items!") > ++ ENDIF(_changeSection EQUAL 0) > ++ > ++ FILE(WRITE "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" "${_changeItems}") > ++ > ++ SET_COMPILE_ENV(PRJ_DOC_DIR "${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER}" > ++ CACHE PATH "Project docdir prefix" FORCE) > ++ > ++ CHANGELOG_WRITE_FILE() > ++ ENDFUNCTION(RELEASE_NOTES_READ_FILE) > ++ > ++ FUNCTION(CHANGELOG_WRITE_FILE) > ++ INCLUDE(DateTimeFormat) > ++ > ++ FILE(WRITE ${CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}\n") > ++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" _changeLog_items) > ++ > ++ FILE(APPEND ${CHANGELOG_FILE} "${_changeLog_items}\n\n") > ++ FILE(READ ${CHANGELOG_PREV_FILE} CHANGELOG_PREV) > ++ FILE(APPEND ${CHANGELOG_FILE} "${CHANGELOG_PREV}") > ++ SET(CMAKE_CACHE_TXT "${CMAKE_BINARY_DIR}/CMakeCache.txt") > ++ > ++ ADD_CUSTOM_COMMAND(OUTPUT ${CHANGELOG_FILE} > ++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR} > ++ DEPENDS ${RELEASE_NOTES_FILE} ${CHANGELOG_PREV_FILE} > ++ COMMENT "Building ${CHANGELOG_FILE}" > ++ VERBATIM > ++ ) > ++ > ++ ADD_CUSTOM_TARGET(changelog ALL > ++ DEPENDS ${CHANGELOG_FILE} > ++ VERBATIM > ++ ) > ++ > ++ ENDFUNCTION(CHANGELOG_WRITE_FILE) > ++ > ++ > ++ > ++ENDIF(NOT DEFINED _MANAGE_VERSION_CMAKE_) > ++ > +--- /dev/null > ++++ b/Modules/cmake_uninstall.cmake.in > +@@ -0,0 +1,21 @@ > ++IF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") > ++ MESSAGE(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt\"") > ++ENDIF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") > ++ > ++FILE(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files) > ++STRING(REGEX REPLACE "\n" ";" files "${files}") > ++FOREACH(file ${files}) > ++ MESSAGE(STATUS "Uninstalling \"$ENV{DESTDIR}${file}\"") > ++ IF(EXISTS "$ENV{DESTDIR}${file}") > ++ EXEC_PROGRAM( > ++ "@CMAKE_COMMAND@" ARGS "-E remove \"$ENV{DESTDIR}${file}\"" > ++ OUTPUT_VARIABLE rm_out > ++ RETURN_VALUE rm_retval > ++ ) > ++ IF(NOT "${rm_retval}" STREQUAL 0) > ++ MESSAGE(FATAL_ERROR "Problem when removing \"$ENV{DESTDIR}${file}\"") > ++ ENDIF(NOT "${rm_retval}" STREQUAL 0) > ++ ELSE(EXISTS "$ENV{DESTDIR}${file}") > ++ MESSAGE(STATUS "File \"$ENV{DESTDIR}${file}\" does not exist.") > ++ ENDIF(EXISTS "$ENV{DESTDIR}${file}") > ++ENDFOREACH(file) > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch > new file mode 100644 > index 000000000..27c585847 > --- /dev/null > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch > @@ -0,0 +1,58 @@ > +--- /dev/null > ++++ b/ChangeLog.prev > +@@ -0,0 +1,55 @@ > ++* Mon Nov 26 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.5 > ++- Table build scripts has been refactored. > ++- cmake-fedora is added as submodule. > ++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by > ++ merging maxiaojun's repository > ++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files > ++- Fixed Google issue 1507: Add CJKV Extension C/D support for Array30 > ++- Merge GitHub Pull request 3: Added the inter punct > ++- Merge GitHub Pull request 4: Give Cangjie and Quick users 9 candidates per page > ++ > ++* Fri Sep 07 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.0 > ++- Table build scripts has been refactored. > ++- cmake-fedora is added as submodule. > ++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by > ++ merging maxiaojun's repository > ++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files > ++ > ++* Fri Oct 28 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.5 > ++- Merge Caius Chance's branch for DYNAMIC_ADJUST > ++- Dependency update to cmake-0.8.1 > ++ > ++* Wed Aug 31 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.4 > ++- Fixed Bug 715707 - FTBFS ibus-table-chinese-1.3.0.20110114-2.fc15 > ++- Fixed Bug 629212 - bad candidate orders in ibus-table-quick > ++- Merged patch from sagara @ github, which address IBus issue 787 > ++- Make it compatible with cmake-fedora-0.7.994 > ++- Move the cmake policies to the front > ++- Suppress the misleading warning from rpm -V > ++ > ++* Fri Jan 14 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20110114 > ++- Fix Bug 667877: ibus-table-yinma and ibus-table-xingma have been obsoleted. > ++- Now depends on cmake-fedora > ++ > ++* Mon Dec 06 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101206 > ++- New tables which was not include in original: > ++ + array30, array30-big, wubi-haifeng > ++- Table removed from original version because of license issues: > ++ + zhengma, ziranma > ++- Add package review ID > ++- Add build tag for el6 > ++ > ++* Fri Dec 03 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101201 > ++- Support out-of-source build > ++- Remove ibus-table-chinese-all > ++ > ++* Wed Jan 06 2010 Caius 'kaio' Chance <k at kaio.me> - 1.3.0.20100527 > ++- Added Quick 3, 5, Classic tables and icons. > ++- Added Easy (big) table and icon. > ++- Updated AUTHORS, COPYING, license and its declarations. > ++- Added CangJie (big) table. > ++ > ++* Wed Aug 19 2008 Yu Yuwei <acevery@gmail.com> - 1.3.0.20100527 > ++- The first version. > ++ > ++ > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch > new file mode 100644 > index 000000000..0f814b765 > --- /dev/null > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch > @@ -0,0 +1,130 @@ > +diff -u -r ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt new/tables/array/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt 2018-10-30 01:56:21.474548447 +0100 > ++++ new/tables/array/CMakeLists.txt 2018-10-29 23:39:57.770116668 +0100 > +@@ -16,7 +16,7 @@ > + > + CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BASE_HEAD} @ONLY) > + > +-CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 array30_27489.txt) > ++CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_27489.txt) > + GENERATE_FREQ(${ARRAY30_BASE_FREQ} > + ${ARRAY30_BASE_UTF8} > + ) > +@@ -41,10 +41,10 @@ > + CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BIG_HEAD} @ONLY) > + > + SET(ARRAY30_EXT_B_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8) > +-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 array30_ExtB.txt) > ++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtB.txt) > + > + SET(ARRAY30_EXT_CD_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8) > +-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 array30_ExtCD_V2012A.txt) > ++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtCD_V2012A.txt) > + > + ADD_CUSTOM_COMMAND(OUTPUT ${ARRAY30_BIG_UTF8} > + COMMAND cat ${ARRAY30_BASE_UTF8} > +Only in new/tables/array: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt new/tables/cangjie/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt 2018-10-30 01:56:50.506773198 +0100 > ++++ new/tables/cangjie/CMakeLists.txt 2018-10-30 00:15:41.319903050 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(cangjie "cangjie3.txt" "cangjie5.txt" "cangjie-big.txt") > ++CONVERT_DB(cangjie "${CMAKE_CURRENT_SOURCE_DIR}/cangjie3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie-big.txt") > + > +Only in new/tables/cangjie: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt new/tables/cantonese/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt 2018-10-30 01:56:29.464408649 +0100 > ++++ new/tables/cantonese/CMakeLists.txt 2018-10-30 00:05:51.026038238 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(cantonese "cantonese.txt" "cantonhk.txt" "jyutping.txt") > ++CONVERT_DB(cantonese "${CMAKE_CURRENT_SOURCE_DIR}/cantonese.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cantonhk.txt" "${CMAKE_CURRENT_SOURCE_DIR}/jyutping.txt") > + > +Only in new/tables/cantonese: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/CMakeLists.txt new/tables/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/CMakeLists.txt 2018-10-30 01:56:08.781947707 +0100 > ++++ new/tables/CMakeLists.txt 2018-10-30 01:53:51.086824367 +0100 > +@@ -87,7 +87,7 @@ > + DEPENDS ${_tabFile} > + COMMENT "Building ${_tabName} table" > + ) > +- LIST(APPEND _dependDb "${_dbF}") > ++ LIST(APPEND _dependDb "${CMAKE_CURRENT_BINARY_DIR}/${_dbF}") > + IF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png") > + LIST(APPEND _dependIcon "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png") > + ELSEIF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.svg") > +Only in new/tables: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt new/tables/easy/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt 2018-10-30 01:56:35.966667250 +0100 > ++++ new/tables/easy/CMakeLists.txt 2018-10-30 00:07:49.806217968 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(easy "easy-big.txt") > ++CONVERT_DB(easy "${CMAKE_CURRENT_SOURCE_DIR}/easy-big.txt") > + > +Only in new/tables/easy: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt new/tables/erbi/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt 2018-10-30 01:56:39.921608060 +0100 > ++++ new/tables/erbi/CMakeLists.txt 2018-10-30 00:08:14.355641341 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(erbi "erbi.txt" "erbi-qs.txt") > ++CONVERT_DB(erbi "${CMAKE_CURRENT_SOURCE_DIR}/erbi.txt" "${CMAKE_CURRENT_SOURCE_DIR}/erbi-qs.txt") > + > +Only in new/tables/erbi: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt new/tables/quick/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt 2018-10-30 01:56:43.592624907 +0100 > ++++ new/tables/quick/CMakeLists.txt 2018-10-30 00:14:13.643389364 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(quick "quick3.txt" "quick5.txt" "quick-classic.txt") > ++CONVERT_DB(quick "${CMAKE_CURRENT_SOURCE_DIR}/quick3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick-classic.txt") > + > +Only in new/tables/quick: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt new/tables/scj/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt 2018-10-30 01:56:47.079691021 +0100 > ++++ new/tables/scj/CMakeLists.txt 2018-10-30 00:00:14.404215150 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(scj "scj6.txt") > ++CONVERT_DB(scj "${CMAKE_CURRENT_SOURCE_DIR}/scj6.txt") > + > +Only in new/tables/scj: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt new/tables/stroke5/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt 2018-10-30 01:56:32.727534736 +0100 > ++++ new/tables/stroke5/CMakeLists.txt 2018-10-30 00:07:28.132024331 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(stroke5 "stroke5.txt") > ++CONVERT_DB(stroke5 "${CMAKE_CURRENT_SOURCE_DIR}/stroke5.txt") > + > +Only in new/tables/stroke5: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt new/tables/wu/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt 2018-10-30 01:56:53.921858589 +0100 > ++++ new/tables/wu/CMakeLists.txt 2018-10-30 00:16:38.080698934 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(wu "wu.txt") > ++CONVERT_DB(wu "${CMAKE_CURRENT_SOURCE_DIR}/wu.txt") > + > +Only in new/tables/wu: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt new/tables/wubi-haifeng/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt 2018-10-30 01:56:15.560132413 +0100 > ++++ new/tables/wubi-haifeng/CMakeLists.txt 2018-10-29 23:30:12.746818405 +0100 > +@@ -5,6 +5,6 @@ > + # COMMENT "Building wubi-haifeng86.UTF-8" > + # ) > + > +-MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt wubi-haifeng86.head wubi-haifeng86.UTF-8 wubi-haifeng86.tail) > ++MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.head ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.UTF-8 ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.tail) > + CONVERT_DB(wubi-haifeng "wubi-haifeng86.txt") > + > +Only in new/tables/wubi-haifeng: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt new/tables/wubi-jidian/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt 2018-10-30 01:56:25.921357528 +0100 > ++++ new/tables/wubi-jidian/CMakeLists.txt 2018-10-30 00:01:13.876283460 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(wubi-jidian "wubi-jidian86.txt") > ++CONVERT_DB(wubi-jidian "${CMAKE_CURRENT_SOURCE_DIR}/wubi-jidian86.txt") > + > +Only in new/tables/wubi-jidian: .CMakeLists.txt.swp > +diff -u -r ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt new/tables/yong/CMakeLists.txt > +--- ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt 2018-10-30 01:56:57.568881862 +0100 > ++++ new/tables/yong/CMakeLists.txt 2018-10-30 00:17:30.326704114 +0100 > +@@ -1,2 +1,2 @@ > +-CONVERT_DB(yong "yong.txt") > ++CONVERT_DB(yong "${CMAKE_CURRENT_SOURCE_DIR}/yong.txt") > + > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb > new file mode 100644 > index 000000000..0c33e4f44 > --- /dev/null > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb > @@ -0,0 +1,82 @@ > +DESCRIPTION = "It is a Japanese input engine for IBus." > +LICENSE = "GPLv3" > +LIC_FILES_CHKSUM = "file://COPYING;md5=86bfc594f9971fb2797f5aea1a49d316" > +SECTION = "inputmethods" > + > +SRC_URI = "https://github.com/definite/${PN}/archive/${PV}.tar.gz \ > + file://0001-revert-CMakeLists.txt.patch \ > + file://0002-add-Modules.patch \ > + file://0003-add-ChangeLog.prev.patch \ > + file://0005-fix-cmake-cross-compile.patch \ > +" > + > +SRC_URI[md5sum] = "6360649580363bb3627a11e32057f6b1" > +SRC_URI[sha256sum] = "ef62c22ef4e8f9085fc40fcbc14c30f6dac458817df98e9f90f883a3e2080089" > + > +inherit cmake > + > +DEPENDS = " ibus-table " > + > +BBCLASSEXTEND = "native" > + > +# The supported options are "Unix Makefiles" or "Ninja". > +OECMAKE_GENERATOR = "Unix Makefiles" > + > +cmake_do_generate_toolchain_file() { > + if [ "${BUILD_SYS}" = "${HOST_SYS}" ]; then > + cmake_crosscompiling="set( CMAKE_CROSSCOMPILING FALSE )" > + fi > + cat > ${WORKDIR}/toolchain.cmake <<EOF > +# CMake system name must be something like "Linux". > +# This is important for cross-compiling. > +$cmake_crosscompiling > +set( CMAKE_SYSTEM_NAME `echo ${TARGET_OS} | sed -e 's/^./\u&/' -e > +'s/^\(Linux\).*/\1/'` ) > +set( CMAKE_SYSTEM_PROCESSOR > +${@map_target_arch_to_uname_arch(d.getVar('TARGET_ARCH'))} ) > +set( CMAKE_C_COMPILER ${OECMAKE_C_COMPILER} ) > +set( CMAKE_CXX_COMPILER ${OECMAKE_CXX_COMPILER} ) > +set( CMAKE_ASM_COMPILER ${OECMAKE_C_COMPILER} ) > +set( CMAKE_AR ${OECMAKE_AR} CACHE FILEPATH "Archiver" ) > +set( CMAKE_C_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "CFLAGS" ) > +set( CMAKE_CXX_FLAGS "${OECMAKE_CXX_FLAGS}" CACHE STRING "CXXFLAGS" ) > +set( CMAKE_ASM_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "ASM FLAGS" ) > +set( CMAKE_C_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING > +"Additional CFLAGS for release" ) > +set( CMAKE_CXX_FLAGS_RELEASE "${OECMAKE_CXX_FLAGS_RELEASE}" CACHE STRING > +"Additional CXXFLAGS for release" ) > +set( CMAKE_ASM_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING > +"Additional ASM FLAGS for release" ) > +set( CMAKE_C_LINK_FLAGS "${OECMAKE_C_LINK_FLAGS}" CACHE STRING "LDFLAGS" ) > +set( CMAKE_CXX_LINK_FLAGS "${OECMAKE_CXX_LINK_FLAGS}" CACHE STRING "LDFLAGS" ) > + > +# only search in the paths provided so cmake doesnt pick > +# up libraries and tools from the native build machine > +set( CMAKE_FIND_ROOT_PATH ${STAGING_DIR_HOST} ${STAGING_DIR_NATIVE} > +${CROSS_DIR} ${OECMAKE_PERLNATIVE_DIR} ${OECMAKE_EXTRA_ROOT_PATH} > +${EXTERNAL_TOOLCHAIN}) > +set( CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY ) > +# set( CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ${OECMAKE_FIND_ROOT_PATH_MODE_PROGRAM} ) > +set( CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY ) > +# set( CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY ) > + > +# Use qt.conf settings > +set( ENV{QT_CONF_PATH} ${WORKDIR}/qt.conf ) > + > +# We need to set the rpath to the correct directory as cmake does not provide > +# any > +# directory as rpath by default > +set( CMAKE_INSTALL_RPATH ${OECMAKE_RPATH} ) > + > +# Use native cmake modules > +list(APPEND CMAKE_MODULE_PATH "${STAGING_DATADIR}/cmake/Modules/") > + > +# add for non /usr/lib libdir, e.g. /usr/lib64 > +set( CMAKE_LIBRARY_PATH ${libdir} ${base_libdir}) > + > +EOF > +} > + > +FILES_${PN} += "${datadir}/ibus-table/icons/* \ > + ${datadir}/ibus-table/tables/* \ > +" > -- > 2.11.0 > > -- > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [meta-openembedded][PATCH v5 6/7] ibus-table-chinese: add ibus-table-chinese recipe 2019-07-25 14:01 ` Khem Raj @ 2019-07-25 14:18 ` Khem Raj 0 siblings, 0 replies; 11+ messages in thread From: Khem Raj @ 2019-07-25 14:18 UTC (permalink / raw) To: Pablo Saavedra; +Cc: openembeded-devel adding 0004-skip-ibus-table-createdb.patch solved the configure issue but then install fails | CMake Error at tables/array/cmake_install.cmake:49 (file): | file INSTALL cannot find | "/mnt/a/yoe/build/tmp/work/aarch64-yoe-linux-musl/ibus-table-chinese/1.8.2-r0/build/tables/array/array30.db". On Thu, Jul 25, 2019 at 7:01 AM Khem Raj <raj.khem@gmail.com> wrote: > > this fails > > -- Checking for module 'ibus-table>=1.2' > -- Found ibus-table, version 1.9.21 > CMake Error at tables/CMakeLists.txt:3 (MESSAGE): > ibus-table-createdb is not installed > > On Wed, Jul 24, 2019 at 7:59 AM Pablo Saavedra <psaavedra@igalia.com> wrote: > > > > Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> > > --- > > .../0001-revert-CMakeLists.txt.patch | 204 ++ > > .../ibus/ibus-table-chinese/0002-add-Modules.patch | 2933 ++++++++++++++++++++ > > .../0003-add-ChangeLog.prev.patch | 58 + > > .../0005-fix-cmake-cross-compile.patch | 130 + > > .../ibus/ibus-table-chinese_1.8.2.bb | 82 + > > 5 files changed, 3407 insertions(+) > > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch > > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch > > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch > > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch > > create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb > > > > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch > > new file mode 100644 > > index 000000000..d677dc49a > > --- /dev/null > > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0001-revert-CMakeLists.txt.patch > > @@ -0,0 +1,204 @@ > > +--- a/CMakeLists.txt > > ++++ b/CMakeLists.txt > > +@@ -1,17 +1,20 @@ > > + cmake_minimum_required(VERSION 2.6.2) > > + > > +-# Included scripts do automatic cmake_policy PUSH and POP. > > +-# OLD: CMake policy in included script will affect the invoker. > > +-# CMAKE_POLICY(SET CMP0011 OLD) > > ++# CMP0011 should be set here, otherwise policy set in module won't affect > > ++# here. > > ++CMAKE_POLICY(SET CMP0011 OLD) > > + > > + # Default CMAKE_INSTALL_PREFIX should be set before PROJECT() > > + SET(CMAKE_INSTALL_PREFIX "/usr" CACHE PATH "Install dir prefix") > > + > > + # Whether to build on fedora > > +-SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "1" CACHE STRING "Enable fedora build") > > ++SET(CMAKE_FEDORA_ENABLE_FEDORA_BUILD "0" CACHE STRING "Enable fedora build") > > + > > +-# Message level INFO1 (5) > > +-SET(MANAGE_MESSAGE_LEVEL 5 CACHE STRING "Message (Verbose) Level") > > ++# Message level M_OFF (4) > > ++SET(MANAGE_MESSAGE_LEVEL 4 CACHE STRING "Message (Verbose) Level") > > ++ > > ++# Default support Gnome shell > > ++SET(GNOME_SHELL 1) > > + > > + #################################################################### > > + # Project specific information > > +@@ -19,34 +22,20 @@ > > + PROJECT(ibus-table-chinese NONE) > > + SET(PRJ_SUMMARY "Chinese input tables for IBus") > > + > > +-SET(SUMMARY_TRANSLATIONS > > +- "zh_CN" "中文码表输入法" > > +- "zh_TW" "中文碼表輸入法" > > +- ) > > +- > > + SET(PRJ_DESCRIPTION > > + "ibus-table-chinese is provides the infrastructure for Chinese input methods. > > + Input tables themselves are in subpackages." > > + ) > > + > > +-SET(DESCRIPTION_TRANSLATIONS > > +- "zh_TW" "ibus-table-chinese 提供了中文碼表輸入法的基礎架構。 > > +- 輸入法本身則在子套件裡。" > > +- ) > > +- > > + SET(AUTHORS "Yuwei Yu, Caius 'kaio' Chance, Ding-Yi Chen") > > + SET(MAINTAINER "Ding-Yi Chen <dchen@redhat.com>") > > + SET(VENDOR "Red Hat, Inc") > > + SET(LICENSE "GPLv3+") > > +-SET(PRJ_GROUP "System Environment/Libraries") > > +-SET(BUILD_ARCH "noarch") > > +-SET(RPM_SPEC_URL "http://code.google.com/p/ibus/") > > +-SET(RPM_SPEC_SOURCES "https://fedorahosted.org/releases/c/m/%{name}/%{name}-%{version}-Source.tar.gz") > > + > > + #################################################################### > > + # Includes > > + # > > +-LIST(INSERT CMAKE_MODULE_PATH 0 ${CMAKE_SOURCE_DIR}/Modules) > > ++SET(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/Modules ${CMAKE_ROOT}/Modules ) > > + > > + # Create a link if Modules/ does not exists > > + IF(EXISTS ${CMAKE_SOURCE_DIR}/cmake-fedora/Modules) > > +@@ -63,6 +52,7 @@ > > + SET(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Library dir") > > + ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") > > + SET(LIBEXEC_DIR "${LIB_DIR}" CACHE PATH "LIBEXEC dir") > > ++ MESSAGE("*Hi") > > + ENDIF(NOT CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > + > > + INCLUDE(ManageEnvironment RESULT_VARIABLE MANAGE_ENVIRONMENT_PATH) > > +@@ -77,56 +67,82 @@ > > + > > + INCLUDE(ManageVersion) > > + RELEASE_NOTES_READ_FILE() > > +-INCLUDE(ManageArchive) > > +-INCLUDE(ManageFile) > > +-INCLUDE(ManageSourceVersionControl) > > +-INCLUDE(ManageTarget) > > +-INCLUDE(ManageTranslation) > > + INCLUDE(ManageUninstall) > > +-ENABLE_TESTING() > > + > > + #################################################################### > > +-# Dependencies > > ++# Required > > + # > > + > > +-INCLUDE(ManageDependency) > > +-## Requires > > +-MANAGE_DEPENDENCY(REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED) > > +- > > +-## Build Requires > > +-MANAGE_DEPENDENCY(BUILD_REQUIRES CMAKE VER "2.6.2" REQUIRED) > > +-MANAGE_DEPENDENCY(BUILD_REQUIRES IBUS-TABLE VER "1.2.0" REQUIRED DEVEL) > > +-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} REQUIRES) > > +-PRJ_INFO_CMAKE_APPEND(${PRJ_INFO_CMAKE} BUILD_REQUIRES) > > ++FIND_PACKAGE(PkgConfig) > > ++PKG_CHECK_MODULES(IBUS_TABLE REQUIRED ibus-table>=1.2) > > + > > + #################################################################### > > + # Building > > + # > > ++ > > + ADD_SUBDIRECTORY(tables) > > + > > + #################################################################### > > + # Installing > > + # > > + > > +-MANAGE_SOURCE_VERSION_CONTROL_GIT() > > ++# Install docs > > ++# Note: Need to use filename only, otherwise > > ++# ${CMAKE_SOURCE_DIR}/RELEASE-NOTES.txt will be deleted in spec > > ++# > > ++ > > ++GET_FILENAME_COMPONENT(_releaseFileName "${RELEASE_FILE}" NAME) > > ++SET(INSTALL_DOCS ${_releaseFileName} AUTHORS README ChangeLog COPYING README) > > ++STRING_JOIN(PRJ_DOC_LIST " " ${INSTALL_DOCS}) > > ++ > > ++INSTALL(FILES ${INSTALL_DOCS} > > ++ DESTINATION "${PRJ_DOC_DIR}") > > + > > +-INSTALL(FILES AUTHORS README ChangeLog COPYING DESTINATION ${PRJ_DOC_DIR}) > > ++#################################################################### > > ++# Source Version Control > > ++# > > ++INCLUDE(ManageSourceVersionControl) > > ++MANAGE_SOURCE_VERSION_CONTROL_GIT() > > + > > + #################################################################### > > + # Packing > > + # > > ++INCLUDE(ManageArchive) > > + > > +-## Pack Source > > +-SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES CACHE PATH "Source Archive Dir") > > +-PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}" > > +- GITIGNORE ${CMAKE_SOURCE_DIR}/.gitignore > > ++IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > ++ INCLUDE(ManageRPM) > > ++ INCLUDE(ManageReleaseFedora) > > ++ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > ++INCLUDE(ManageRelease) > > ++ > > ++SET(PRJ_IGNORE_FILES_COMMON > > ++ "/doc/" "\\\\.spec$" "messages.po$" "\\\\.orig$" "/cmake-fedora/" > > ++ "/\\\\.cache/" > > ++ "\\\\.db$" > > ++ ) > > ++ > > ++LIST(APPEND PRJ_IGNORE_FILES_COMMON > > ++ "\\\\.utf8$" "\\\\.tmp$" "\\\\.freq$" "\\\\.tab$" > > ++ "tables/array/.*\\\\.head$" > > ++ "array30.txt" "array30-big.txt" "wubi-haifeng86.txt" > > + ) > > + > > +-## Pack RPM > > ++LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES > > ++ ${PRJ_IGNORE_FILES_COMMON} "/bin/" "\\\\.xml$" "\\\\.schemas") > > ++ > > ++IF(RPM_BUILD_SOURCES) > > ++ SET(SOURCE_ARCHIVE_DIR ${RPM_BUILD_SOURCES}) > > ++ELSE(RPM_BUILD_SOURCES) > > ++ SET(SOURCE_ARCHIVE_DIR ${CMAKE_BINARY_DIR}/SOURCES) > > ++ENDIF(RPM_BUILD_SOURCES) > > ++ > > ++PACK_SOURCE_ARCHIVE("${SOURCE_ARCHIVE_DIR}") > > + IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > +- SET(RPM_BUILD_SOURCES ${SOURCE_ARCHIVE_DIR}) > > +- INCLUDE(ManageRPM) > > +- PACK_RPM(SPEC_IN "SPECS/project.spec.in") > > ++ PACK_RPM() > > ++ RELEASE_FEDORA(fedora el6) > > ++ # "Off" Warning is displayed if mock is not installed. > > ++ RPM_MOCK_BUILD() > > ++ MANAGE_RELEASE(release_fedora) > > + ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > + > > + #################################################################### > > +@@ -142,20 +158,10 @@ > > + #MANAGE_UPLOAD_CMD(scp src UPLOAD_FILES ${SOURCE_ARCHIVE_FILE}) > > + #ADD_DEPENDENCIES(upload upload_src) > > + > > +-INCLUDE(ManageRelease) > > +-IF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > +- INCLUDE(ManageReleaseFedora) > > +- RELEASE_FEDORA(fedora el6) > > +- # "Off" Warning is displayed if mock is not installed. > > +- MANAGE_RELEASE(tag_push release_fedora) > > +-ELSE(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > +- MANAGE_RELEASE(tag_push) > > +-ENDIF(CMAKE_FEDORA_ENABLE_FEDORA_BUILD) > > +- > > +- > > + #################################################################### > > + # Test Suites. > > + # > > ++#ENABLE_TESTING() > > + #ADD_TEST("Test" test_cmd1) > > + > > + > > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch > > new file mode 100644 > > index 000000000..ffacda683 > > --- /dev/null > > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0002-add-Modules.patch > > @@ -0,0 +1,2933 @@ > > +--- /dev/null > > ++++ b/Modules/DateTimeFormat.cmake > > +@@ -0,0 +1,37 @@ > > ++# - Date/time format module. > > ++# > > ++# Included by: > > ++# ManageVersion > > ++# > > ++# Defines the following macros: > > ++# TODAY(date_var format [locale]) > > ++# - Get date of today in specified format and locale. > > ++# * Parameters: > > ++# date_var: Result date string > > ++# format: date format for date(1) > > ++# locale: locale of the string. Use current locale setting if > > ++# locale is not given. > > ++# > > ++# Provides the following variables: > > ++# TODAY_CHANGELOG: Today in the format that is used in RPM Changelog. > > ++# e.g. Wed 08 Aug 2010 > > ++# > > ++# TODAY_SHORT: Short presentation of today, e.g. 20100818. > > ++# > > ++ > > ++IF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_) > > ++ SET(_DATE_TIME_FORMAT_CMAKE_ "DEFINED") > > ++ > > ++ MACRO(TODAY date_var format) > > ++ INCLUDE(ManageVariable) > > ++ SET(_locale ${ARGV2}) > > ++ IF(_locale) > > ++ SET(ENV{LC_ALL} ${_locale}) > > ++ ENDIF(_locale) > > ++ COMMAND_OUTPUT_TO_VARIABLE(${date_var} date --utc "${format}") > > ++ ENDMACRO(TODAY date_var format) > > ++ > > ++ TODAY(TODAY_CHANGELOG "+%a %b %d %Y" "C") > > ++ TODAY(TODAY_SHORT "+%Y%m%d" "C") > > ++ENDIF(NOT DEFINED _DATE_TIME_FORMAT_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageAPIDoc.cmake > > +@@ -0,0 +1,50 @@ > > ++# - Mage generated API documents > > ++# This module is for API document generation, such as doxygen. > > ++# Defines following macros: > > ++# MANAGE_APIDOC_DOXYGEN(doxygen_in doc_dir) > > ++# - This macro generate documents according to doxygen template. > > ++# Arguments: > > ++# + doxygen_in: Doxygen template file. > > ++# + doc_dir: Document source directory to be copied from. > > ++# Reads following variable: > > ++# + PRJ_DOC_DIR: Directory for document > > ++# > > ++# > > ++IF(NOT DEFINED _MANAGE_APIDOC_CMAKE_) > > ++ SET(_MANAGE_APIDOC_CMAKE_ "DEFINED") > > ++ INCLUDE(ManageMessage) > > ++ > > ++ MACRO(MANAGE_APIDOC_DOXYGEN doxygen_in doc_dir) > > ++ SET(SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES} "/Doxyfile$") > > ++ SET(_manage_apidoc_doxygen_dependency_missing 0) > > ++ IF(NOT PRJ_DOC_DIR) > > ++ M_MSG(${M_OFF} "PRJ_DOC_DIR undefined. Doxygen support disabled.") > > ++ SET(_manage_apidoc_doxygen_dependency_missing 1) > > ++ ENDIF(NOT PRJ_DOC_DIR) > > ++ > > ++ FIND_PACKAGE(doxygen) > > ++ IF(NOT PACKAGE_FOUND_NAME) > > ++ M_MSG(${M_OFF} "Package doxygen not found. Doxygen support disabled.") > > ++ SET(_manage_apidoc_doxygen_dependency_missing 1) > > ++ ENDIF(NOT PACKAGE_FOUND_NAME) > > ++ > > ++ FIND_PROGRAM(DOXYGEN_CMD doxygen) > > ++ IF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program doxygen not found. Doxygen support disabled.") > > ++ SET(_manage_apidoc_doxygen_dependency_missing 1) > > ++ ENDIF(DOXYGEN_CMD STREQUAL "DOXYGEN_CMD-NOTFOUND") > > ++ > > ++ IF(NOT _manage_apidoc_doxygen_dependency_missing) > > ++ CONFIGURE_FILE(${doxygen_in} Doxyfile) > > ++ > > ++ ADD_CUSTOM_TARGET(doxygen > > ++ COMMAND "${DOXYGEN_CMD}" "Doxyfile" > > ++ ) > > ++ > > ++ INSTALL(DIRECTORY ${doc_dir} > > ++ DESTINATION "${PRJ_DOC_DIR}" > > ++ ) > > ++ ENDIF(NOT _manage_apidoc_doxygen_dependency_missing) > > ++ ENDMACRO(MANAGE_APIDOC_DOXYGEN doxygen_template) > > ++ENDIF(NOT DEFINED _MANAGE_APIDOC_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageArchive.cmake > > +@@ -0,0 +1,179 @@ > > ++# - Pack source helper module > > ++# By default CPack pack everything under the source directory, this is usually > > ++# undesirable. We avoid this by using the sane default ignore list. > > ++# > > ++# Includes: > > ++# ManageVersion > > ++# CPack > > ++# > > ++# Included by: > > ++# ManageRPM > > ++# > > ++# Read and Defines following variable: > > ++# SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT: Default list of file patterns > > ++# that are normally exclude from the source package. > > ++# Override it by setting it before INCLUDE(ManageArchive). > > ++# Defines following target: > > ++# pack_remove_old: Remove old source package files. > > ++# Defines following macro: > > ++# SOURCE_ARCHIVE(outputDir [generator]) > > ++# - Pack source files as <projectName>-<PRJ_VER>-Source.<packFormat>, > > ++# Arguments: > > ++# + outputDir: Directory to write source archive. > > ++# + generator: (Optional) Method to make archive. Basically this argument > > ++# is passed as CPACK_GENERATOR. Default to TGZ. > > ++# Read following variables: > > ++# + PROJECT_NAME: Project name > > ++# + VENDOR: Organization that issue this project. > > ++# + PRJ_VER: Project version > > ++# + PRJ_SUMMARY: (Optional) Project summary > > ++# + SOURCE_ARCHIVE_IGNORE_FILES: A list of regex filename pattern > > ++# that should be excluded from source archive file. > > ++# (SOURCE_ARCHIVE_IGNORE_FILE_CMAKE) is already in this list. > > ++# Define following variables: > > ++# + SOURCE_ARCHIVE_CONTENTS: List of files to be packed to archive. > > ++# + SOURCE_ARCHIVE_FILE_EXTENSION: File extension of the source package > > ++# files. > > ++# + SOURCE_ARCHIVE_NAME: Name of source archive (without path) > > ++# + SOURCE_ARCHIVE_FILE: Path to source archive file > > ++# Target: > > ++# + pack_src: Pack source files like package_source. > > ++# + clean_pack_src: Remove all source archives. > > ++# + clean_old_pack_src: Remove all old source package. > > ++# > > ++# > > ++IF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_) > > ++ SET (_MANAGE_ARCHIVE_CMAKE_ "DEFINED") > > ++ SET(SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT > > ++ "/\\\\.svn/" "/CVS/" "/\\\\.git/" "\\\\.gitignore$" "/\\\\.hg/" > > ++ "/\\\\.hgignore$" > > ++ "~$" "\\\\.swp$" "\\\\.log$" "\\\\.bak$" "\\\\.old$" > > ++ "\\\\.gmo$" "\\\\.cache$" > > ++ "\\\\.tar.gz$" "\\\\.tar.bz2$" "/src/config\\\\.h$" "NO_PACK") > > ++ > > ++ SET(SOURCE_ARCHIVE_IGNORE_FILES_CMAKE "/CMakeFiles/" "_CPack_Packages/" "/Testing/" > > ++ "\\\\.directory$" "CMakeCache\\\\.txt$" > > ++ "/install_manifest.txt$" > > ++ "/cmake_install\\\\.cmake$" "/cmake_uninstall\\\\.cmake$""/CPack.*\\\\.cmake$" "/CTestTestfile\\\\.cmake$" > > ++ "Makefile$" "/${PROJECT_NAME}-${PRJ_VER}-SOURCE/" > > ++ ) > > ++ > > ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES_DEFAULT} ${SOURCE_ARCHIVE_IGNORE_FILES_CMAKE}) > > ++ > > ++ INCLUDE(ManageVersion) > > ++ > > ++ # Internal: SOURCE_ARCHIVE_GET_CONTENTS() > > ++ # - Return all source file to be packed. > > ++ # This is called by SOURCE_ARCHIVE(), > > ++ # So no need to call it again. > > ++ FUNCTION(SOURCE_ARCHIVE_GET_CONTENTS ) > > ++ SET(_fileList "") > > ++ FILE(GLOB_RECURSE _ls "*") > > ++ STRING(REPLACE "\\\\" "\\" _ignore_files "${SOURCE_ARCHIVE_IGNORE_FILES}") > > ++ FOREACH(_file ${_ls}) > > ++ SET(_matched 0) > > ++ FOREACH(filePattern ${_ignore_files}) > > ++ M_MSG(${M_INFO3} "_file=${_file} filePattern=${filePattern}") > > ++ IF(_file MATCHES "${filePattern}") > > ++ SET(_matched 1) > > ++ BREAK() > > ++ ENDIF(_file MATCHES "${filePattern}") > > ++ ENDFOREACH(filePattern ${_ignore_files}) > > ++ IF(NOT _matched) > > ++ FILE(RELATIVE_PATH _file ${CMAKE_SOURCE_DIR} "${_file}") > > ++ LIST(APPEND _fileList "${_file}") > > ++ ENDIF(NOT _matched) > > ++ ENDFOREACH(_file ${_ls}) > > ++ SET(SOURCE_ARCHIVE_CONTENTS ${_fileList} CACHE STRING "Source archive file list" FORCE) > > ++ M_MSG(${M_INFO2} "SOURCE_ARCHIVE_CONTENTS=${SOURCE_ARCHIVE_CONTENTS}") > > ++ ENDFUNCTION(SOURCE_ARCHIVE_GET_CONTENTS var) > > ++ > > ++ MACRO(PACK_SOURCE_ARCHIVE outputDir) > > ++ IF(PRJ_VER STREQUAL "") > > ++ M_MSG(${M_FATAL} "PRJ_VER not defined") > > ++ ENDIF(PRJ_VER STREQUAL "") > > ++ IF(${ARGV2}) > > ++ SET(CPACK_GENERATOR "${ARGV2}") > > ++ ELSE(${ARGV2}) > > ++ SET(CPACK_GENERATOR "TGZ") > > ++ ENDIF(${ARGV2}) > > ++ SET(CPACK_SOURCE_GENERATOR ${CPACK_GENERATOR}) > > ++ IF(${CPACK_GENERATOR} STREQUAL "TGZ") > > ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.gz") > > ++ ELSEIF(${CPACK_GENERATOR} STREQUAL "TBZ2") > > ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "tar.bz2") > > ++ ELSEIF(${CPACK_GENERATOR} STREQUAL "ZIP") > > ++ SET(SOURCE_ARCHIVE_FILE_EXTENSION "zip") > > ++ ENDIF(${CPACK_GENERATOR} STREQUAL "TGZ") > > ++ > > ++ SET(CPACK_SOURCE_IGNORE_FILES ${SOURCE_ARCHIVE_IGNORE_FILES}) > > ++ SET(CPACK_PACKAGE_VERSION ${PRJ_VER}) > > ++ > > ++ IF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING) > > ++ SET(CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/README) > > ++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/COPYING) > > ++ > > ++ IF(EXISTS ${CMAKE_SOURCE_DIR}/README) > > ++ SET(CPACK_PACKAGE_DESCRIPTION_FILE ${CMAKE_SOURCE_DIR}/README) > > ++ ENDIF(EXISTS ${CMAKE_SOURCE_DIR}/README) > > ++ > > ++ IF(DEFINED PRJ_SUMMARY) > > ++ SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY "${PRJ_SUMMARY}") > > ++ ENDIF(DEFINED PRJ_SUMMARY) > > ++ > > ++ SET(CPACK_SOURCE_PACKAGE_FILE_NAME "${PROJECT_NAME}-${PRJ_VER}-Source") > > ++ SET(SOURCE_ARCHIVE_NAME "${CPACK_SOURCE_PACKAGE_FILE_NAME}.${SOURCE_ARCHIVE_FILE_EXTENSION}" CACHE STRING "Source archive name" FORCE) > > ++ SET(SOURCE_ARCHIVE_FILE "${outputDir}/${SOURCE_ARCHIVE_NAME}" CACHE FILEPATH "Source archive file" FORCE) > > ++ > > ++ SET(CPACK_PACKAGE_VENDOR "${VENDOR}") > > ++ SOURCE_ARCHIVE_GET_CONTENTS() > > ++ > > ++ SET(SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "") > > ++ FOREACH(_file ${SOURCE_ARCHIVE_CONTENTS}) > > ++ LIST(APPEND SOURCE_ARCHIVE_CONTENTS_ABSOLUTE "${CMAKE_HOME_DIRECTORY}/${_file}") > > ++ ENDFOREACH(_file ${SOURCE_ARCHIVE_CONTENTS}) > > ++ > > ++ INCLUDE(CPack) > > ++ > > ++ # Get relative path of outputDir > > ++ FILE(RELATIVE_PATH _outputDir_rel ${CMAKE_BINARY_DIR} ${outputDir}) > > ++ #MESSAGE("#_outputDir_rel=${_outputDir_rel}") > > ++ > > ++ IF("${_outputDir_rel}" STREQUAL ".") > > ++ ADD_CUSTOM_TARGET_COMMAND(pack_src > > ++ OUTPUT "${SOURCE_ARCHIVE_FILE}" > > ++ COMMAND make package_source > > ++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS} > > ++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}" > > ++ ) > > ++ ELSE("${_outputDir_rel}" STREQUAL ".") > > ++ FILE(MAKE_DIRECTORY ${outputDir}) > > ++ ADD_CUSTOM_TARGET_COMMAND(pack_src > > ++ OUTPUT "${SOURCE_ARCHIVE_FILE}" > > ++ COMMAND make package_source > > ++ COMMAND cmake -E copy "${SOURCE_ARCHIVE_NAME}" "${outputDir}" > > ++ COMMAND cmake -E remove ${SOURCE_ARCHIVE_NAME} > > ++ DEPENDS ${SOURCE_ARCHIVE_CONTENTS_ABSOLUTE} > > ++ COMMENT "Packing the source as: ${SOURCE_ARCHIVE_FILE}" > > ++ ) > > ++ ENDIF("${_outputDir_rel}" STREQUAL ".") > > ++ > > ++ ADD_CUSTOM_TARGET(clean_old_pack_src > > ++ COMMAND find . > > ++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}' ! -name '${PROJECT_NAME}-${PRJ_VER}-*.${SOURCE_ARCHIVE_FILE_EXTENSION}' > > ++ -print -delete > > ++ COMMENT "Cleaning old source archives" > > ++ ) > > ++ > > ++ ADD_DEPENDENCIES(clean_old_pack_src changelog ) > > ++ > > ++ ADD_CUSTOM_TARGET(clean_pack_src > > ++ COMMAND find . > > ++ -name '${PROJECT_NAME}*.${SOURCE_ARCHIVE_FILE_EXTENSION}' > > ++ -print -delete > > ++ COMMENT "Cleaning all source archives" > > ++ ) > > ++ ENDMACRO(PACK_SOURCE_ARCHIVE outputDir) > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_ARCHIVE_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageEnvironment.cmake > > +@@ -0,0 +1,190 @@ > > ++# - Manage build environment such as environment variables and compile flags. > > ++# This module predefine various environment variables, cmake policies, and > > ++# compile flags. > > ++# > > ++# The setting can be viewed and modified by ccmake. > > ++# > > ++# List of frequently used variable and compile flags: > > ++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}. > > ++# + BIN_DIR: Directory for executable. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/bin > > ++# + DATA_DIR: Directory for architecture independent data files. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/share > > ++# + DOC_DIR: Directory for documentation > > ++# Default: ${DATA_DIR}/doc > > ++# + SYSCONF_DIR: System wide configuration files. > > ++# Default: /etc > > ++# + LIB_DIR: System wide library path. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit, > > ++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit. > > ++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/libexec > > ++# + PROJECT_NAME: Project name > > ++# > > ++# Defines following macros: > > ++# SET_COMPILE_ENV(var default_value [ENV_NAME env_name] > > ++# [CACHE type docstring [FORCE]]) > > ++# - Ensure a variable is set to nonempty value, then add the variable and value to > > ++# compiling definition. > > ++# The value is determined by following order: > > ++# 1. Value of var if var is defined. > > ++# 2. Environment variable with the same name (or specified via ENV_NAME) > > ++# 3. Parameter default_value > > ++# Parameters: > > ++# + var: Variable to be set > > ++# + default_value: Default value of the var > > ++# + env_name: (Optional)The name of environment variable. > > ++# Only need if different from var. > > ++# + CACHE type docstring [FORCE]: > > ++# Same with "SET" command. > > ++# > > ++# SET_USUAL_COMPILE_ENVS() > > ++# - Set the most often used variable and compile flags. > > ++# It defines compile flags according to the values of corresponding variables, > > ++# usually under the same or similar name. > > ++# If a corresponding variable is not defined yet, then a default value is assigned > > ++# to that variable, then define the flag. > > ++# > > ++# Defines following flags according to the variable with same name. > > ++# + CMAKE_INSTALL_PREFIX: Compile flag whose value is ${CMAKE_INSTALL_PREFIX}. > > ++# + BIN_DIR: Directory for executable. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/bin > > ++# + DATA_DIR: Directory for architecture independent data files. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/share > > ++# + DOC_DIR: Directory for documentation > > ++# Default: ${DATA_DIR}/doc > > ++# + SYSCONF_DIR: System wide configuration files. > > ++# Default: /etc > > ++# + LIB_DIR: System wide library path. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/lib for 32 bit, > > ++# ${CMAKE_INSTALL_PREFIX}/lib64 for 64 bit. > > ++# + LIBEXEC_DIR: Executables that are not meant to be executed by user directly. > > ++# Default: ${CMAKE_INSTALL_PREFIX}/libexec > > ++# + PROJECT_NAME: Project name > > ++# + PRJ_VER: Project version > > ++# + PRJ_DATA_DIR: Data directory for the project. > > ++# Default: ${DATA_DIR}/${PROJECT_NAME} > > ++# + PRJ_DOC_DIR: DocuFILEPATH = File chooser dialog. > > ++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER} > > ++ > > ++IF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_) > > ++ SET(_MANAGE_ENVIRONMENT_CMAKE_ "DEFINED") > > ++ SET(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON) > > ++ CMAKE_POLICY(VERSION 2.6.2) > > ++ > > ++ MACRO(SET_COMPILE_ENV var default_value) > > ++ SET(_stage "") > > ++ SET(_env "${var}") > > ++ SET(_setOpts "") > > ++ SET(_force 0) > > ++ FOREACH(_arg ${ARGN}) > > ++ IF(_arg STREQUAL "ENV_NAME") > > ++ SET(_stage "ENV_NAME") > > ++ ELSEIF(_arg STREQUAL "CACHE") > > ++ SET(_stage "_CACHE") > > ++ ELSE(_arg STREQUAL "ENV_NAME") > > ++ IF(_stage STREQUAL "ENV_NAME") > > ++ SET(_env "${_arg}") > > ++ ELSEIF(_stage STREQUAL "_CACHE") > > ++ LIST(APPEND _setOpts "${_arg}") > > ++ IF(_arg STREQUAL "FORCE") > > ++ SET(_force 1) > > ++ ENDIF(_arg STREQUAL "FORCE") > > ++ ENDIF(_stage STREQUAL "ENV_NAME") > > ++ ENDIF(_arg STREQUAL "ENV_NAME") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ > > ++ IF(NOT "${_setOpts}" STREQUAL "") > > ++ LIST(INSERT _setOpts 0 "CACHE") > > ++ ENDIF(NOT "${_setOpts}" STREQUAL "") > > ++ > > ++ # Set the variable > > ++ IF(_force) > > ++ IF(NOT "$ENV{${_env}}" STREQUAL "") > > ++ SET(${var} "$ENV{${_env}}" ${_setOpts}) > > ++ ELSE(NOT "$ENV{${_env}}" STREQUAL "") > > ++ SET(${var} "${default_value}" ${_setOpts}) > > ++ ENDIF(NOT "$ENV{${_env}}" STREQUAL "") > > ++ ELSE(_force) > > ++ IF(NOT "${${var}}" STREQUAL "") > > ++ SET(${var} "${${var}}" ${_setOpts}) > > ++ ELSEIF(NOT "$ENV{${_env}}" STREQUAL "") > > ++ SET(${var} "$ENV{${_env}}" ${_setOpts}) > > ++ ELSE(NOT "${${var}}" STREQUAL "") > > ++ # Default value > > ++ SET(${var} "${default_value}" ${_setOpts}) > > ++ ENDIF(NOT "${${var}}" STREQUAL "") > > ++ ENDIF(_force) > > ++ > > ++ # Enforce CMP0005 to new, yet pop after ADD_DEFINITION > > ++ CMAKE_POLICY(PUSH) > > ++ CMAKE_POLICY(SET CMP0005 NEW) > > ++ ADD_DEFINITIONS(-D${_env}=${${var}}) > > ++ CMAKE_POLICY(POP) > > ++ M_MSG(${M_INFO2} "SET(${var} ${${var}})") > > ++ ENDMACRO(SET_COMPILE_ENV var default_value) > > ++ > > ++ MACRO(MANAGE_CMAKE_POLICY policyName defaultValue) > > ++ IF(POLICY ${policyName}) > > ++ CMAKE_POLICY(GET "${policyName}" _cmake_policy_value) > > ++ IF(_cmake_policy_value STREQUAL "") > > ++ # Policy not defined yet > > ++ CMAKE_POLICY(SET "${policyName}" "${defaultValue}") > > ++ ENDIF(_cmake_policy_value STREQUAL "") > > ++ ENDIF(POLICY ${policyName}) > > ++ ENDMACRO(MANAGE_CMAKE_POLICY policyName defaultValue) > > ++ > > ++ #################################################################### > > ++ # Recommended policy setting > > ++ # > > ++ # CMP0005: Preprocessor definition values are now escaped automatically. > > ++ # OLD:Preprocessor definition values are not escaped. > > ++ MANAGE_CMAKE_POLICY(CMP0005 NEW) > > ++ > > ++ # CMP0009: FILE GLOB_RECURSE calls should not follow symlinks by default. > > ++ # OLD: FILE GLOB_RECURSE calls follow symlinks > > ++ MANAGE_CMAKE_POLICY(CMP0009 NEW) > > ++ > > ++ # CMP0017: Prefer files from the CMake module directory when including from there. > > ++ # OLD: Prefer files from CMAKE_MODULE_PATH regardless > > ++ MANAGE_CMAKE_POLICY(CMP0017 NEW) > > ++ > > ++ # Include should be put after the cmake policy > > ++ INCLUDE(ManageMessage) > > ++ M_MSG(${M_INFO1} "CMAKE_HOST_SYSTEM=${CMAKE_HOST_SYSTEM}") > > ++ M_MSG(${M_INFO1} "CMAKE_SYSTEM=${CMAKE_SYSTEM}") > > ++ > > ++ #################################################################### > > ++ # CMake Variables > > ++ # > > ++ SET_COMPILE_ENV(BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" > > ++ CACHE PATH "Binary dir") > > ++ SET_COMPILE_ENV(DATA_DIR "${CMAKE_INSTALL_PREFIX}/share" > > ++ CACHE PATH "Data dir") > > ++ SET_COMPILE_ENV(DOC_DIR "${DATA_DIR}/doc" > > ++ CACHE PATH "Documentation dir") > > ++ SET_COMPILE_ENV(SYSCONF_DIR "/etc" > > ++ CACHE PATH "System configuration dir") > > ++ SET_COMPILE_ENV(LIBEXEC_DIR "${CMAKE_INSTALL_PREFIX}/libexec" > > ++ CACHE PATH "LIBEXEC dir") > > ++ > > ++ IF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") > > ++ SET_COMPILE_ENV(IS_64 "64" CACHE STRING "IS_64") > > ++ ENDIF(CMAKE_SYSTEM_PROCESSOR MATCHES "64") > > ++ > > ++ SET_COMPILE_ENV(LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib${IS_64}" > > ++ CACHE PATH "Library dir") > > ++ > > ++ SET_COMPILE_ENV(PROJECT_NAME "${PROJECT_NAME}") > > ++ SET_COMPILE_ENV(PRJ_DATA_DIR "${DATA_DIR}/${PROJECT_NAME}") > > ++ > > ++ # Directory to store cmake-fedora specific temporary files. > > ++ IF(NOT CMAKE_FEDORA_TMP_DIR) > > ++ SET(CMAKE_FEDORA_TMP_DIR "${CMAKE_BINARY_DIR}/NO_PACK") > > ++ ENDIF(NOT CMAKE_FEDORA_TMP_DIR) > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_FEDORA_TMP_DIR} > > ++ COMMAND cmake -E make_directory ${CMAKE_FEDORA_TMP_DIR} > > ++ COMMENT "Create CMAKE_FEDORA_TMP_DIR" > > ++ ) > > ++ENDIF(NOT DEFINED _MANAGE_ENVIRONMENT_CMAKE_) > > +--- /dev/null > > ++++ b/Modules/ManageGConf.cmake > > +@@ -0,0 +1,67 @@ > > ++# - GConf relative targets such as install/unstall schemas. > > ++# This module finds gconftool-2 or gconftool for GConf manipulation. > > ++# > > ++# Reads following variables: > > ++# GCONF_SCHEMAS_FILE: Schema file. > > ++# Default: "${PROJECT_NAME}.schemas" > > ++# > > ++# GCONF_SCHEMAS_INSTALLED_DIR: Direct of installed schemas files. > > ++# Default: "${SYSCONF_INSTALL_DIR}/gconf/schemas" > > ++# > > ++# GCONF_CONFIG_SOURCE: configuration source. > > ++# Default: "" (Use the system default) > > ++# > > ++# Defines following targets: > > ++# install_schemas: install schemas > > ++# > > ++# uninstall_schemas: uninstall schemas > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_GCONF_CMAKE_) > > ++ FIND_PROGRAM(GCONFTOOL_CMD NAMES gconftool-2 gconftool) > > ++ > > ++ IF(${GCONFTOOL_CMD} STREQUAL "GCONFTOOL_CMD-NOTFOUND") > > ++ MESSAGE(FATAL_ERROR "gconftool and gconftool-2 are not found, please install GConf or GConf2.") > > ++ ENDIF() > > ++ > > ++ IF (NOT DEFINED GCONF_SCHEMAS_FILE) > > ++ SET(GCONF_SCHEMAS_FILE "${PROJECT_NAME}.schemas") > > ++ ENDIF(NOT DEFINED GCONF_SCHEMAS_FILE) > > ++ > > ++ GET_FILENAME_COMPONENT(_gconf_schemas_basename ${GCONF_SCHEMAS_FILE} NAME) > > ++ > > ++ IF (NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR) > > ++ IF(SYSCONF_INSTALL_DIR) > > ++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_INSTALL_DIR}/gconf/schemas") > > ++ ELSE(SYSCONF_INSTALL_DIR) > > ++ SET(GCONF_SCHEMAS_INSTALLED_DIR "${SYSCONF_DIR}/gconf/schemas") > > ++ ENDIF(SYSCONF_INSTALL_DIR) > > ++ ENDIF(NOT DEFINED GCONF_SCHEMAS_INSTALLED_DIR) > > ++ > > ++ IF (NOT DEFINED GCONF_CONFIG_SOURCE) > > ++ SET(GCONF_CONFIG_SOURCE "") > > ++ ENDIF(NOT DEFINED GCONF_CONFIG_SOURCE) > > ++ SET(ENV{GCONF_CONFIG_SOURCE} ${GCONF_CONFIG_SOURCE}) > > ++ > > ++ > > ++ ADD_CUSTOM_TARGET(uninstall_schemas > > ++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE} > > ++ ${GCONFTOOL_CMD} --makefile-uninstall-rule > > ++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} > > ++ COMMENT "Uninstalling schemas" > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(install_schemas > > ++ COMMAND cmake -E copy ${GCONF_SCHEMAS_FILE} ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} > > ++ COMMAND GCONF_CONFIG_SOURCE=${GCONF_CONFIG_SOURCE} > > ++ ${GCONFTOOL_CMD} --makefile-install-rule > > ++ ${GCONF_SCHEMAS_INSTALLED_DIR}/${_gconf_schemas_basename} > > ++ DEPENDS ${GCONF_SCHEMAS_FILE} > > ++ COMMENT "Installing schemas" > > ++ ) > > ++ > > ++ INSTALL(FILES ${GCONF_SCHEMAS_FILE} > > ++ DESTINATION "${GCONF_SCHEMAS_INSTALLED_DIR}") > > ++ENDIF(NOT DEFINED _MANAGE_GCONF_CMAKE_) > > ++ > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageInstall.cmake > > +@@ -0,0 +1,25 @@ > > ++# - Manage installation > > ++# Convenient collection of macros and functions to manage installation. > > ++# > > ++# Defines following macros: > > ++# MANAGE_INSTALL(var file1 [file2 ....]) > > ++# - Managed install. Files are installed to the path specified by var. > > ++# This macro also sets 'MANAGE_INSTALL_$var' as files that associate to this var > > ++# The files that are associated to this var is > > ++# Read and define: > > ++# + MANAGE_INSTALL_$var : Files to be installed under var. > > ++# Arguments: > > ++# + var: A variable that contains install destination path > > ++# + file1 ... : File to be installed to $var > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_INSTALL_CMAKE_) > > ++ SET (_MANAGE_INSTALL_CMAKE_ "DEFINED") > > ++ SET(MANAGE_INSTALL_FILES "") > > ++ > > ++ MACRO(MANAGE_INSTALL var file1) > > ++ LIST(APPEND MANAGE_INSTALL_${var} ${file1} ${ARGN}) > > ++ INSTALL(FILES $file1 ${ARGN} > > ++ DESTINATION "${var}") > > ++ ENDMACRO(MANAGE_INSTALL var file1) > > ++ENDIF(NOT DEFINED _MANAGE_INSTALL_CMAKE_) > > +--- /dev/null > > ++++ b/Modules/ManageMessage.cmake > > +@@ -0,0 +1,60 @@ > > ++# - Manage the output and debug messages. > > ++# This module has macros that control how many messages to be shown > > ++# by defining the desire message level. > > ++# > > ++# Defined variables that represent verbose levels: > > ++# 1: M_FATAL - Critical error,Should stop immediately > > ++# 2: M_ERROR - Error that will Eventually fail > > ++# 3: M_WARN - General Warning. > > ++# 4: M_OFF - Optional functionalities are turned-off because requirement is not met. > > ++# 5: M_INFO1 - Info/debug message > > ++# 6: M_INFO2 - Info/debug message > > ++# 7: M_INFO3 - Info/debug message > > ++# > > ++# Read following variable: > > ++# + MANAGE_MESSAGE_LEVEL: Message level in integer. > > ++# Messages with greater level will be suppressed. > > ++# Default is ${M_OFF} > > ++# + MANAGE_MESSAGE_LABELS: Labels that printed in front of the message for > > ++# corresponding message level. > > ++# Default is "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ") > > ++# > > ++# Define following macros: > > ++# M_MSG(level msg) > > ++# - Surpress the message if level is higher than MANAGE_MESSAGE_LEVEL > > ++# Otherwise show the message. > > ++# Arguments: > > ++# + level: level of the message. > > ++# + msg: Message to show. > > ++# > > ++ > > ++ > > ++IF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_) > > ++ SET(_MANAGE_MESSAGE_CMAKE_ "DEFINED") > > ++ SET(M_FATAL 1) > > ++ SET(M_ERROR 2) > > ++ SET(M_WARN 3) > > ++ SET(M_OFF 4) > > ++ SET(M_INFO1 5) > > ++ SET(M_INFO2 6) > > ++ SET(M_INFO3 7) > > ++ IF(NOT DEFINED MANAGE_MESSAGE_LABELS) > > ++ SET(MANAGE_MESSAGE_LABELS > > ++ "[Fatal] ;[Error] ;[Warn] ;[Off] ;[Info1] ;[Info2] ;[Info3] ") > > ++ ENDIF(NOT DEFINED MANAGE_MESSAGE_LABELS) > > ++ > > ++ SET(MANAGE_MESSAGE_LEVEL ${M_OFF} CACHE STRING "Message (Verbose) Level") > > ++ > > ++ MACRO(M_MSG level msg) > > ++ IF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL}) > > ++ MATH(EXPR _lvl ${level}-1) > > ++ LIST(GET MANAGE_MESSAGE_LABELS ${_lvl} _label) > > ++ IF(${level} EQUAL 1) > > ++ MESSAGE(FATAL_ERROR "${_label}${msg}") > > ++ ELSE(${level} EQUAL 1) > > ++ MESSAGE("${_label}${msg}") > > ++ ENDIF(${level} EQUAL 1) > > ++ ENDIF(NOT ${level} GREATER ${MANAGE_MESSAGE_LEVEL}) > > ++ ENDMACRO(M_MSG level msg) > > ++ENDIF(NOT DEFINED _MANAGE_MESSAGE_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageRPM.cmake > > +@@ -0,0 +1,327 @@ > > ++# - RPM generation, maintaining (remove old rpm) and verification (rpmlint). > > ++# This module provides macros that provides various rpm building and > > ++# verification targets. > > ++# > > ++# This module needs variable from ManageArchive, so INCLUDE(ManageArchive) > > ++# before this module. > > ++# > > ++# Includes: > > ++# ManageMessage > > ++# ManageTarget > > ++# > > ++# Reads and defines following variables if dependencies are satisfied: > > ++# PRJ_RPM_SPEC_IN_FILE: spec.in that generate spec > > ++# PRJ_RPM_SPEC_FILE: spec file for rpmbuild. > > ++# RPM_DIST_TAG: (optional) Current distribution tag such as el5, fc10. > > ++# Default: Distribution tag from rpm --showrc > > ++# > > ++# RPM_BUILD_TOPDIR: (optional) Directory of the rpm topdir. > > ++# Default: ${CMAKE_BINARY_DIR} > > ++# > > ++# RPM_BUILD_SPECS: (optional) Directory of generated spec files > > ++# and RPM-ChangeLog. > > ++# Note this variable is not for locating > > ++# SPEC template (project.spec.in), RPM-ChangeLog source files. > > ++# These are located through the path of spec_in. > > ++# Default: ${RPM_BUILD_TOPDIR}/SPECS > > ++# > > ++# RPM_BUILD_SOURCES: (optional) Directory of source (tar.gz or zip) files. > > ++# Default: ${RPM_BUILD_TOPDIR}/SOURCES > > ++# > > ++# RPM_BUILD_SRPMS: (optional) Directory of source rpm files. > > ++# Default: ${RPM_BUILD_TOPDIR}/SRPMS > > ++# > > ++# RPM_BUILD_RPMS: (optional) Directory of generated rpm files. > > ++# Default: ${RPM_BUILD_TOPDIR}/RPMS > > ++# > > ++# RPM_BUILD_BUILD: (optional) Directory for RPM build. > > ++# Default: ${RPM_BUILD_TOPDIR}/BUILD > > ++# > > ++# RPM_BUILD_BUILDROOT: (optional) Directory for RPM build. > > ++# Default: ${RPM_BUILD_TOPDIR}/BUILDROOT > > ++# > > ++# Defines following variables: > > ++# RPM_IGNORE_FILES: A list of exclude file patterns for PackSource. > > ++# This value is appended to SOURCE_ARCHIVE_IGNORE_FILES after including > > ++# this module. > > ++# > > ++# Defines following Macros: > > ++# PACK_RPM() > > ++# - Generate spec and pack rpm according to the spec file. > > ++# Arguments: > > ++# Targets: > > ++# + srpm: Build srpm (rpmbuild -bs). > > ++# + rpm: Build rpm and srpm (rpmbuild -bb) > > ++# + rpmlint: Run rpmlint to generated rpms. > > ++# + clean_rpm": Clean all rpm and build files. > > ++# + clean_pkg": Clean all source packages, rpm and build files. > > ++# + clean_old_rpm: Remove old rpm and build files. > > ++# + clean_old_pkg: Remove old source packages and rpms. > > ++# This macro defines following variables: > > ++# + PRJ_RELEASE: Project release with distribution tags. (e.g. 1.fc13) > > ++# + PRJ_RELEASE_NO: Project release number, without distribution tags. (e.g. 1) > > ++# + PRJ_SRPM_FILE: Path to generated SRPM file, including relative path. > > ++# + PRJ_RPM_BUILD_ARCH: Architecture to be build. > > ++# + PRJ_RPM_FILES: Binary RPM files to be build. > > ++# > > ++# RPM_MOCK_BUILD() > > ++# - Add mock related targets. > > ++# Targets: > > ++# + rpm_mock_i386: Make i386 rpm > > ++# + rpm_mock_x86_64: Make x86_64 rpm > > ++# This macor reads following variables?: > > ++# + MOCK_RPM_DIST_TAG: Prefix of mock configure file, such as "fedora-11", "fedora-rawhide", "epel-5". > > ++# Default: Convert from RPM_DIST_TAG > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_RPM_CMAKE_) > > ++ SET (_MANAGE_RPM_CMAKE_ "DEFINED") > > ++ > > ++ INCLUDE(ManageMessage) > > ++ INCLUDE(ManageTarget) > > ++ SET(_manage_rpm_dependency_missing 0) > > ++ > > ++ FIND_PROGRAM(RPMBUILD_CMD NAMES "rpmbuild-md5") > > ++ IF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "rpmbuild is not found in PATH, rpm build support is disabled.") > > ++ SET(_manage_rpm_dependency_missing 1) > > ++ ENDIF("${RPMBUILD_CMD}" STREQUAL "RPMBUILD_CMD-NOTFOUND") > > ++ > > ++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES "${PROJECT_NAME}.spec.in" "project.spec.in") > > ++ SET(_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH "${CMAKE_SOURCE_DIR}/SPECS" "SPECS" "." "${RPM_BUILD_TOPDIR}/SPECS") > > ++ FIND_FILE(PRJ_RPM_SPEC_IN_FILE NAMES ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_NAMES} PATHS ${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH}) > > ++ IF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND") > > ++ M_MSG(${M_OFF} "Cannot find ${PROJECT}.spec.in or project .in" > > ++ "${_PRJ_RPM_SPEC_IN_FILE_SEARCH_PATH}") > > ++ M_MSG(${M_OFF} "rpm build support is disabled.") > > ++ SET(_manage_rpm_dependency_missing 1) > > ++ ENDIF(PRJ_RPM_SPEC_IN_FILE STREQUAL "PRJ_RPM_SPEC_IN_FILE-NOTFOUND") > > ++ > > ++ IF(NOT _manage_rpm_dependency_missing) > > ++ INCLUDE(ManageVariable) > > ++ SET (SPEC_FILE_WARNING "This file is generated, please modified the .spec.in file instead!") > > ++ > > ++ EXECUTE_PROCESS(COMMAND rpm --showrc > > ++ COMMAND grep -E "dist[[:space:]]*\\." > > ++ COMMAND sed -e "s/^.*dist\\s*\\.//" > > ++ COMMAND tr \\n \\t > > ++ COMMAND sed -e s/\\t// > > ++ OUTPUT_VARIABLE _RPM_DIST_TAG) > > ++ > > ++ SET(RPM_DIST_TAG "${_RPM_DIST_TAG}" CACHE STRING "RPM Dist Tag") > > ++ SET(RPM_BUILD_TOPDIR "${CMAKE_BINARY_DIR}" CACHE PATH "RPM topdir") > > ++ SET(RPM_BUILD_SPECS "${RPM_BUILD_TOPDIR}/SPECS" CACHE PATH "RPM SPECS dir") > > ++ SET(RPM_BUILD_SOURCES "${RPM_BUILD_TOPDIR}/SOURCES" CACHE PATH "RPM SOURCES dir") > > ++ SET(RPM_BUILD_SRPMS "${RPM_BUILD_TOPDIR}/SRPMS" CACHE PATH "RPM SRPMS dir") > > ++ SET(RPM_BUILD_RPMS "${RPM_BUILD_TOPDIR}/RPMS" CACHE PATH "RPM RPMS dir") > > ++ SET(RPM_BUILD_BUILD "${RPM_BUILD_TOPDIR}/BUILD" CACHE PATH "RPM BUILD dir") > > ++ SET(RPM_BUILD_BUILDROOT "${RPM_BUILD_TOPDIR}/BUILDROOT" CACHE PATH "RPM BUILDROOT dir") > > ++ > > ++ ## RPM spec.in and RPM-ChangeLog.prev > > ++ SET(PRJ_RPM_SPEC_FILE "${RPM_BUILD_SPECS}/${PROJECT_NAME}.spec" CACHE FILEPATH "spec") > > ++ SET(PRJ_RPM_SPEC_IN_FILE "${_PRJ_RPM_SPEC_IN_FILE}" CACHE FILEPATH "spec.in") > > ++ GET_FILENAME_COMPONENT(_PRJ_RPM_SPEC_IN_DIR "${PRJ_RPM_SPEC_IN_FILE}" PATH) > > ++ SET(PRJ_RPM_SPEC_IN_DIR "${_PRJ_RPM_SPEC_IN_DIR}" CACHE INTERNAL "Dir contains spec.in") > > ++ SET(RPM_CHANGELOG_PREV_FILE "${PRJ_RPM_SPEC_IN_DIR}/RPM-ChangeLog.prev" CACHE FILEPATH "ChangeLog.prev for RPM") > > ++ SET(RPM_CHANGELOG_FILE "${RPM_BUILD_SPECS}/RPM-ChangeLog" CACHE FILEPATH "ChangeLog for RPM") > > ++ > > ++ # Add RPM build directories in ignore file list. > > ++ GET_FILENAME_COMPONENT(_rpm_build_sources_basename ${RPM_BUILD_SOURCES} NAME) > > ++ GET_FILENAME_COMPONENT(_rpm_build_srpms_basename ${RPM_BUILD_SRPMS} NAME) > > ++ GET_FILENAME_COMPONENT(_rpm_build_rpms_basename ${RPM_BUILD_RPMS} NAME) > > ++ GET_FILENAME_COMPONENT(_rpm_build_build_basename ${RPM_BUILD_BUILD} NAME) > > ++ GET_FILENAME_COMPONENT(_rpm_build_buildroot_basename ${RPM_BUILD_BUILDROOT} NAME) > > ++ SET(RPM_IGNORE_FILES > > ++ "/${_rpm_build_sources_basename}/" "/${_rpm_build_srpms_basename}/" "/${_rpm_build_rpms_basename}/" > > ++ "/${_rpm_build_build_basename}/" "/${_rpm_build_buildroot_basename}/" "debug.*s.list") > > ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES ${RPM_IGNORE_FILES}) > > ++ > > ++ ENDIF(NOT _manage_rpm_dependency_missing) > > ++ > > ++ FUNCTION(PRJ_RPM_SPEC_IN_READ_FILE) > > ++ SETTING_FILE_GET_VARIABLE(_releaseStr Release "${PRJ_RPM_SPEC_IN_FILE}" ":") > > ++ STRING(REPLACE "%{?dist}" ".${RPM_DIST_TAG}" _PRJ_RELEASE ${_releaseStr}) > > ++ STRING(REPLACE "%{?dist}" "" _PRJ_RELEASE_NO ${_releaseStr}) > > ++ #MESSAGE("_releaseTag=${_releaseTag} _releaseStr=${_releaseStr}") > > ++ > > ++ SET(PRJ_RELEASE ${_PRJ_RELEASE} CACHE STRING "Release with dist" FORCE) > > ++ SET(PRJ_RELEASE_NO ${_PRJ_RELEASE_NO} CACHE STRING "Release w/o dist" FORCE) > > ++ SET(PRJ_SRPM "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.src.rpm" CACHE STRING "PRJ SRPM" FORCE) > > ++ SET(PRJ_SRPM_FILE "${RPM_BUILD_SRPMS}/${PRJ_SRPM}" CACHE FILEPATH "PRJ SRPM File" FORCE) > > ++ > > ++ ## GET BuildArch > > ++ SETTING_FILE_GET_VARIABLE(_archStr BuildArch "${PRJ_RPM_SPEC_IN_FILE}" ":") > > ++ IF(NOT _archStr STREQUAL "noarch") > > ++ SET(_archStr ${CMAKE_HOST_SYSTEM_PROCESSOR}) > > ++ ENDIF(NOT _archStr STREQUAL "noarch") > > ++ SET(PRJ_RPM_BUILD_ARCH "${_archStr}" CACHE STRING "BuildArch") > > ++ > > ++ ## Main rpm > > ++ SET(PRJ_RPM_FILES "${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH}/${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE}.${PRJ_RPM_BUILD_ARCH}.rpm" > > ++ CACHE STRING "RPM files" FORCE) > > ++ > > ++ ## Obtains sub packages > > ++ ## [TODO] > > ++ ENDFUNCTION(PRJ_RPM_SPEC_IN_READ_FILE) > > ++ > > ++ MACRO(RPM_CHANGELOG_WRITE_FILE) > > ++ INCLUDE(DateTimeFormat) > > ++ > > ++ FILE(WRITE ${RPM_CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}-${PRJ_RELEASE_NO}\n") > > ++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" CHANGELOG_ITEMS) > > ++ > > ++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${CHANGELOG_ITEMS}\n\n") > > ++ > > ++ # Update RPM_ChangeLog > > ++ # Use this instead of FILE(READ is to avoid error when reading '\' > > ++ # character. > > ++ EXECUTE_PROCESS(COMMAND cat "${RPM_CHANGELOG_PREV_FILE}" > > ++ OUTPUT_VARIABLE RPM_CHANGELOG_PREV > > ++ OUTPUT_STRIP_TRAILING_WHITESPACE) > > ++ > > ++ FILE(APPEND ${RPM_CHANGELOG_FILE} "${RPM_CHANGELOG_PREV}") > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${RPM_CHANGELOG_FILE} > > ++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR} > > ++ DEPENDS ${CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE} > > ++ COMMENT "Write ${RPM_CHANGELOG_FILE}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(rpm_changelog_prev_update > > ++ COMMAND ${CMAKE_COMMAND} -E copy ${RPM_CHANGELOG_FILE} ${RPM_CHANGELOG_PREV_FILE} > > ++ DEPENDS ${RPM_CHANGELOG_FILE} > > ++ COMMENT "${RPM_CHANGELOG_FILE} are saving as ${RPM_CHANGELOG_PREV_FILE}" > > ++ ) > > ++ > > ++ IF(TARGET after_release_commit_pre) > > ++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update) > > ++ ENDIF(TARGET after_release_commit_pre) > > ++ ENDMACRO(RPM_CHANGELOG_WRITE_FILE) > > ++ > > ++ MACRO(PACK_RPM) > > ++ IF(NOT _manage_rpm_dependency_missing ) > > ++ PRJ_RPM_SPEC_IN_READ_FILE() > > ++ RPM_CHANGELOG_WRITE_FILE() > > ++ > > ++ # Generate spec > > ++ CONFIGURE_FILE(${PRJ_RPM_SPEC_IN_FILE} ${PRJ_RPM_SPEC_FILE}) > > ++ > > ++ #------------------------------------------------------------------- > > ++ # RPM build commands and targets > > ++ > > ++ FILE(MAKE_DIRECTORY ${RPM_BUILD_BUILD}) > > ++ > > ++ # Don't worry about SRPMS, RPMS and BUILDROOT, it will be created by rpmbuild > > ++ > > ++ ADD_CUSTOM_TARGET_COMMAND(srpm > > ++ OUTPUT ${PRJ_SRPM_FILE} > > ++ COMMAND ${RPMBUILD_CMD} -bs ${PRJ_RPM_SPEC_FILE} > > ++ --define '_sourcedir ${RPM_BUILD_SOURCES}' > > ++ --define '_builddir ${RPM_BUILD_BUILD}' > > ++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}' > > ++ --define '_rpmdir ${RPM_BUILD_RPMS}' > > ++ --define '_specdir ${RPM_BUILD_SPECS}' > > ++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${SOURCE_ARCHIVE_FILE} > > ++ COMMENT "Building srpm" > > ++ ) > > ++ > > ++ # RPMs (except SRPM) > > ++ > > ++ ADD_CUSTOM_TARGET_COMMAND(rpm > > ++ OUTPUT ${PRJ_RPM_FILES} > > ++ COMMAND ${RPMBUILD_CMD} -ba ${PRJ_RPM_SPEC_FILE} > > ++ --define '_sourcedir ${RPM_BUILD_SOURCES}' > > ++ --define '_builddir ${RPM_BUILD_BUILD}' > > ++ --define '_buildrootdir ${RPM_BUILD_BUILDROOT}' > > ++ --define '_srcrpmdir ${RPM_BUILD_SRPMS}' > > ++ --define '_rpmdir ${RPM_BUILD_RPMS}' > > ++ --define '_specdir ${RPM_BUILD_SPECS}' > > ++ DEPENDS ${PRJ_RPM_SPEC_FILE} ${PRJ_SRPM_FILE} > > ++ COMMENT "Building rpm" > > ++ ) > > ++ > > ++ > > ++ ADD_CUSTOM_TARGET(install_rpms > > ++ COMMAND find ${RPM_BUILD_RPMS}/${PRJ_RPM_BUILD_ARCH} > > ++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm' ! > > ++ -name '${PROJECT_NAME}-debuginfo-${PRJ_RELEASE_NO}.*.${PRJ_RPM_BUILD_ARCH}.rpm' > > ++ -print -exec sudo rpm --upgrade --hash --verbose '{}' '\\;' > > ++ DEPENDS ${PRJ_RPM_FILES} > > ++ COMMENT "Install all rpms except debuginfo" > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(rpmlint > > ++ COMMAND find . > > ++ -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm' > > ++ -print -exec rpmlint '{}' '\\;' > > ++ DEPENDS ${PRJ_SRPM_FILE} ${PRJ_RPM_FILES} > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(clean_old_rpm > > ++ COMMAND find . > > ++ -name '${PROJECT_NAME}*.rpm' ! -name '${PROJECT_NAME}*-${PRJ_VER}-${PRJ_RELEASE_NO}.*.rpm' > > ++ -print -delete > > ++ COMMAND find ${RPM_BUILD_BUILD} > > ++ -path '${PROJECT_NAME}*' ! -path '${RPM_BUILD_BUILD}/${PROJECT_NAME}-${PRJ_VER}-*' > > ++ -print -delete > > ++ COMMENT "Cleaning old rpms and build." > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(clean_old_pkg > > ++ ) > > ++ > > ++ ADD_DEPENDENCIES(clean_old_pkg clean_old_rpm clean_old_pack_src) > > ++ > > ++ ADD_CUSTOM_TARGET(clean_rpm > > ++ COMMAND find . -name '${PROJECT_NAME}-*.rpm' -print -delete > > ++ COMMENT "Cleaning rpms.." > > ++ ) > > ++ ADD_CUSTOM_TARGET(clean_pkg > > ++ ) > > ++ > > ++ ADD_DEPENDENCIES(clean_rpm clean_old_rpm) > > ++ ADD_DEPENDENCIES(clean_pkg clean_rpm clean_pack_src) > > ++ ENDIF(NOT _manage_rpm_dependency_missing ) > > ++ ENDMACRO(PACK_RPM) > > ++ > > ++ MACRO(RPM_MOCK_BUILD) > > ++ IF(NOT _manage_rpm_dependency_missing ) > > ++ FIND_PROGRAM(MOCK_CMD mock) > > ++ IF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "mock is not found in PATH, mock support disabled.") > > ++ ELSE(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") > > ++ IF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch") > > ++ IF(NOT DEFINED MOCK_RPM_DIST_TAG) > > ++ STRING(REGEX MATCH "^fc([1-9][0-9]*)" _fedora_mock_dist "${RPM_DIST_TAG}") > > ++ STRING(REGEX MATCH "^el([1-9][0-9]*)" _el_mock_dist "${RPM_DIST_TAG}") > > ++ > > ++ IF (_fedora_mock_dist) > > ++ STRING(REGEX REPLACE "^fc([1-9][0-9]*)" "fedora-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}") > > ++ ELSEIF (_el_mock_dist) > > ++ STRING(REGEX REPLACE "^el([1-9][0-9]*)" "epel-\\1" MOCK_RPM_DIST_TAG "${RPM_DIST_TAG}") > > ++ ELSE (_fedora_mock_dist) > > ++ SET(MOCK_RPM_DIST_TAG "fedora-devel") > > ++ ENDIF(_fedora_mock_dist) > > ++ ENDIF(NOT DEFINED MOCK_RPM_DIST_TAG) > > ++ > > ++ #MESSAGE ("MOCK_RPM_DIST_TAG=${MOCK_RPM_DIST_TAG}") > > ++ ADD_CUSTOM_TARGET(rpm_mock_i386 > > ++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/i386 > > ++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-i386" --resultdir="${RPM_BUILD_RPMS}/i386" ${PRJ_SRPM_FILE} > > ++ DEPENDS ${PRJ_SRPM_FILE} > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(rpm_mock_x86_64 > > ++ COMMAND ${CMAKE_COMMAND} -E make_directory ${RPM_BUILD_RPMS}/x86_64 > > ++ COMMAND ${MOCK_CMD} -r "${MOCK_RPM_DIST_TAG}-x86_64" --resultdir="${RPM_BUILD_RPMS}/x86_64" ${PRJ_SRPM_FILE} > > ++ DEPENDS ${PRJ_SRPM_FILE} > > ++ ) > > ++ ENDIF(NOT PRJ_RPM_BUILD_ARCH STREQUAL "noarch") > > ++ ENDIF(MOCK_CMD STREQUAL "MOCK_CMD-NOTFOUND") > > ++ ENDIF(NOT _manage_rpm_dependency_missing ) > > ++ > > ++ ENDMACRO(RPM_MOCK_BUILD) > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_RPM_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageRelease.cmake > > +@@ -0,0 +1,57 @@ > > ++# - Module that perform release task. > > ++# This module provides common targets for release or post-release chores. > > ++# > > ++# Defines following macros: > > ++# MANAGE_RELEASE(releaseTargets) > > ++# - Run release targets and the target "after_release_commit". > > ++# This macro skips the missing targets so distro package maintainers > > ++# do not have to get the irrelevant dependencies. > > ++# For the "hard" requirement, please use cmake command > > ++# "ADD_DEPENDENCIES". > > ++# Arguments: > > ++# + releaseTargets: Targets need to be done for a release. > > ++# Note that sequence of the targets does not guarantee the > > ++# sequence of execution. > > ++# Defines following targets: > > ++# + release: Perform everything required for a release. > > ++# Reads following variables: > > ++# + RELEASE_DEPENDS_FILES: List of files that the release depends. > > ++# Note that the sequence of the target does not guarantee the > > ++# sequence of execution. > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_RELEASE_CMAKE_) > > ++ SET(_MANAGE_RELEASE_CMAKE_ "DEFINED") > > ++ INCLUDE(ManageMessage) > > ++ > > ++ MACRO(MANAGE_RELEASE) > > ++ ## Target: release > > ++ ADD_CUSTOM_TARGET(release > > ++ DEPENDS ${RELEASE_DEPENDS_FILES} > > ++ COMMENT "Releasing ${PROJECT_NAME}-${PRJ_VER}" > > ++ ) > > ++ > > ++ ## Remove the missing targets > > ++ SET(_releaseTargets "") > > ++ FOREACH(_target ${ARGN}) > > ++ IF(TARGET ${_target}) > > ++ LIST(APPEND _releaseTargets "${_target}") > > ++ ELSE(TARGET ${_target}) > > ++ M_MSG(${M_OFF} "Target ${_target} does not exist, skipped.") > > ++ ENDIF(TARGET ${_target}) > > ++ ENDFOREACH(_target ${ARGN}) > > ++ > > ++ IF(_releaseTargets) > > ++ ADD_DEPENDENCIES(release ${_releaseTargets}) > > ++ ENDIF(_releaseTargets) > > ++ > > ++ ## Run after release > > ++ #ADD_CUSTOM_COMMAND(TARGET release > > ++ # POST_BUILD > > ++ # COMMAND make after_release_commit > > ++ # COMMENT "After released ${PROJECT_NAME}-${PRJ_VER}" > > ++ # ) > > ++ > > ++ ENDMACRO(MANAGE_RELEASE) > > ++ENDIF(NOT DEFINED _MANAGE_RELEASE_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageReleaseFedora.cmake > > +@@ -0,0 +1,381 @@ > > ++# - Module for working with Fedora and EPEL releases. > > ++# > > ++# This module provides convenient targets and macros for Fedora and EPEL > > ++# releases by using fedpkg, koji, and bodhi > > ++# > > ++# This module check following files for dependencies: > > ++# 1. ~/.fedora-upload-ca.cert : Ensure it has certificate file to submit to Fedora. > > ++# 2. fedpkg : Required to submit to fedora. > > ++# 3. koji : Required to submit to fedora. > > ++# 4. bodhi : Required to submit to fedora. > > ++# > > ++# If on of above file is missing, this module will be skipped. > > ++# > > ++# This module read the supported release information from cmake-fedora.conf > > ++# It finds cmake-fedora.conf in following order: > > ++# 1. Current directory > > ++# 2. Path as defined CMAKE_SOURCE_DIR > > ++# 3. /etc/cmake-fedora.conf > > ++# > > ++# Includes: > > ++# ManageMessage > > ++# > > ++# Defines following variables: > > ++# CMAKE_FEDORA_CONF: Path to cmake_fedora.conf > > ++# FEDPKG_CMD: Path to fedpkg > > ++# KOJI_CMD: Path to koji > > ++# GIT_CMD: Path to git > > ++# BODHI_CMD: Path to bodhi > > ++# KOJI_BUILD_SCRATCH_CMD: Path to koji-build-scratch > > ++# FEDORA_RAWHIDE_VER: Fedora Rawhide version. > > ++# FEDORA_SUPPORTED_VERS: Fedora supported versions. > > ++# EPEL_SUPPORTED_VERS: EPEL supported versions. > > ++# FEDPKG_DIR: Dir for fedpkg > > ++# FEDORA_KAMA: Fedora Karma. Default:3 > > ++# FEDORA_UNSTABLE_KARMA: Fedora unstable Karma. Default:3 > > ++# FEDORA_AUTO_KARMA: Whether to use fedora Karma system. Default:"True" > > ++# > > ++# Defines following functions: > > ++# RELEASE_FEDORA(tagList) > > ++# - Release this project to specified Fedora and EPEL releases. > > ++# Arguments: > > ++# + tagList: Fedora and EPEL dist tags that this project submit to. > > ++# E.g. "f18", "f17", "el7" > > ++# You can also specify "fedora" for fedora current releases, > > ++# and/or "epel" for EPEL current releases. > > ++# > > ++# Reads following variables: > > ++# + PRJ_SRPM_FILE: Project SRPM > > ++# + FEDPKG_DIR: Directory for fedpkg checkout. > > ++# Default: FedPkg. > > ++# Reads and define following variables: > > ++# + FEDORA_RAWHIDE_VER: Numeric version of rawhide, such as 18 > > ++# + FEDORA_SUPPORTED_VERS: Numeric versions of currently supported Fedora, > > ++# such as 17;16 > > ++# + EPEL_SUPPORTED_VERS: Numeric versions of currently supported EPEL > > ++# since version 5. Such as 6;5 > > ++# + FEDORA_KARMA: Karma for auto pushing. > > ++# Default: 3 > > ++# + FEDORA_UNSTABLE_KARMA: Karma for auto unpushing. > > ++# Default: 3 > > ++# + FEDORA_AUTO_KARMA: Whether to enable auto pushing/unpushing > > ++# Default: True > > ++# Defines following targets: > > ++# + release_fedora: Make necessary steps for releasing on fedora, > > ++# such as making source file tarballs, source rpms, build with fedpkg > > ++# and upload to bodhi. > > ++# + bodhi_new: Submit the package to bodhi > > ++# + fedpkg_<tag>_build: Build for tag > > ++# + fedpkg_<tag>_commit: Import, commit and push > > ++# + koji_build_scratch: Scratch build using koji > > ++# > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_RELEASE_FEDORA_) > > ++ SET(_MANAGE_RELEASE_FEDORA_ "DEFINED") > > ++ INCLUDE(ManageMessage) > > ++ INCLUDE(ManageTarget) > > ++ SET(_manage_release_fedora_dependencies_missing 0) > > ++ SET(KOJI_BUILD_SCRATCH "koji-build-scratch" CACHE INTERNAL "Koji build scratch name") > > ++ > > ++ FIND_FILE(CMAKE_FEDORA_CONF cmake-fedora.conf "." "${CMAKE_SOURCE_DIR}" "${SYSCONF_DIR}") > > ++ M_MSG(${M_INFO1} "CMAKE_FEDORA_CONF=${CMAKE_FEDORA_CONF}") > > ++ IF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND") > > ++ M_MSG(${M_OFF} "cmake-fedora.conf cannot be found! Fedora release support disabled.") > > ++ SET(_manage_release_fedora_dependencies_missing 1) > > ++ ENDIF("${CMAKE_FEDORA_CONF}" STREQUAL "CMAKE_FEDORA_CONF-NOTFOUND") > > ++ > > ++ FIND_PROGRAM(FEDPKG_CMD fedpkg) > > ++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program fedpkg is not found! Fedora support disabled.") > > ++ SET(_manage_release_fedora_dependencies_missing 1) > > ++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > > ++ > > ++ FIND_PROGRAM(KOJI_CMD koji) > > ++ IF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program koji is not found! Koji support disabled.") > > ++ ENDIF(KOJI_CMD STREQUAL "KOJI_CMD-NOTFOUND") > > ++ > > ++ FIND_PROGRAM(GIT_CMD git) > > ++ IF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program git is not found! Fedora support disabled.") > > ++ SET(_manage_release_fedora_dependencies_missing 1) > > ++ ENDIF(FEDPKG_CMD STREQUAL "FEDPKG_CMD-NOTFOUND") > > ++ > > ++ FIND_PROGRAM(BODHI_CMD bodhi) > > ++ IF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program bodhi is not found! Bodhi support disabled.") > > ++ ENDIF(BODHI_CMD STREQUAL "BODHI_CMD-NOTFOUND") > > ++ > > ++ > > ++ ## Set variables > > ++ IF(NOT _manage_release_fedora_dependencies_missing) > > ++ # Set release tags according to CMAKE_FEDORA_CONF > > ++ SETTING_FILE_GET_ALL_VARIABLES(${CMAKE_FEDORA_CONF}) > > ++ > > ++ SET(FEDORA_RAWHIDE_VER "${FEDORA_RAWHIDE_VERSION}" > > ++ CACHE STRING "Fedora Rawhide ver" FORCE) > > ++ STRING_SPLIT(_FEDORA_SUPPORTED_VERS " " ${FEDORA_SUPPORTED_VERSIONS}) > > ++ SET(FEDORA_SUPPORTED_VERS ${_FEDORA_SUPPORTED_VERS} > > ++ CACHE STRING "Fedora supported vers" FORCE) > > ++ > > ++ STRING_SPLIT(_EPEL_SUPPORTED_VERS " " ${EPEL_SUPPORTED_VERSIONS}) > > ++ SET(EPEL_SUPPORTED_VERS ${_EPEL_SUPPORTED_VERS} > > ++ CACHE STRING "EPEL supported vers" FORCE) > > ++ > > ++ SET(FEDORA_KOJI_TAG_POSTFIX "" CACHE STRING "Koji Fedora tag prefix") > > ++ SET(EPEL_KOJI_TAG_POSTFIX "-testing-candidate" > > ++ CACHE STRING "Koji EPEL tag prefix") > > ++ > > ++ SET(BODHI_TEMPLATE_FILE "${CMAKE_FEDORA_TMP_DIR}/bodhi.template" > > ++ CACHE FILEPATH "Bodhi template file" > > ++ ) > > ++ > > ++ SET(FEDPKG_DIR "${CMAKE_BINARY_DIR}/FedPkg" CACHE PATH "FedPkg dir") > > ++ FILE(MAKE_DIRECTORY ${FEDPKG_DIR}) > > ++ > > ++ GET_FILENAME_COMPONENT(_FEDPKG_DIR_NAME ${FEDPKG_DIR} NAME) > > ++ LIST(APPEND SOURCE_ARCHIVE_IGNORE_FILES "/${_FEDPKG_DIR_NAME}/") > > ++ > > ++ ## Fedora package variables > > ++ SET(FEDORA_KARMA "3" CACHE STRING "Fedora Karma") > > ++ SET(FEDORA_UNSTABLE_KARMA "-3" CACHE STRING "Fedora unstable Karma") > > ++ SET(FEDORA_AUTO_KARMA "True" CACHE STRING "Fedora auto Karma") > > ++ > > ++ FIND_PROGRAM(KOJI_BUILD_SCRATCH_CMD ${KOJI_BUILD_SCRATCH} PATHS ${CMAKE_BINARY_DIR}/scripts . ) > > ++ IF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program koji_build_scratch is not found!") > > ++ ENDIF(KOJI_BUILD_SCRATCH_CMD STREQUAL "KOJI_BUILD_SCRATCH_CMD-NOTFOUND") > > ++ > > ++ SET(FEDPKG_PRJ_DIR "${FEDPKG_DIR}/${PROJECT_NAME}") > > ++ > > ++ ## Don't use what is in git, otherwise it will be cleaned > > ++ ## By make clean > > ++ SET(FEDPKG_PRJ_DIR_GIT "${FEDPKG_PRJ_DIR}/.git/.cmake-fedora") > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${FEDPKG_PRJ_DIR_GIT} > > ++ COMMAND [ -d ${FEDPKG_PRJ_DIR} ] || ${FEDPKG_CMD} clone ${PROJECT_NAME} > > ++ COMMAND ${CMAKE_COMMAND} -E touch ${FEDPKG_PRJ_DIR_GIT} > > ++ COMMENT "Making FedPkg directory" > > ++ WORKING_DIRECTORY ${FEDPKG_DIR} > > ++ VERBATIM > > ++ ) > > ++ > > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > > ++ > > ++ FUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH) > > ++ IF(NOT _manage_release_fedora_dependencies_missing) > > ++ ADD_CUSTOM_TARGET(koji_build_scratch > > ++ COMMAND ${KOJI_BUILD_SCRATCH_CMD} ${PRJ_SRPM_FILE} ${ARGN} > > ++ DEPENDS "${PRJ_SRPM_FILE}" > > ++ COMMENT "koji scratch build on ${PRJ_SRPM_FILE}" > > ++ VERBATIM > > ++ ) > > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > > ++ ADD_DEPENDENCIES(koji_build_scratch rpmlint) > > ++ ADD_DEPENDENCIES(tag_pre koji_build_scratch) > > ++ ENDFUNCTION(RELEASE_ADD_KOJI_BUILD_SCRATCH) > > ++ > > ++ # Convert fedora koji tag to bodhi tag > > ++ FUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag) > > ++ STRING(REGEX REPLACE "f([0-9]+)" "fc\\1" _tag_replace "${tag}") > > ++ IF(_tag_replace STREQUAL "") > > ++ SET(${bodhiTag} "${tag}" PARENT_SCOPE) > > ++ ELSE(_tag_replace STREQUAL "") > > ++ SET(${bodhiTag} "${_tag_replace}" PARENT_SCOPE) > > ++ ENDIF(_tag_replace STREQUAL "") > > ++ ENDFUNCTION(_RELEASE_TO_BODHI_TAG bodhiTag tag) > > ++ > > ++ FUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag) > > ++ IF(NOT _manage_release_fedora_dependencies_missing) > > ++ SET(_branch ${tag}) > > ++ IF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > > ++ SET(_branch "master") > > ++ ENDIF("${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > > ++ > > ++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}") > > ++ > > ++ ## Fedpkg import and commit > > ++ SET(_import_opt "") > > ++ IF(NOT ver EQUAL FEDORA_RAWHIDE_VER) > > ++ SET(_import_opt "-b ${tag}") > > ++ ENDIF(NOT ver EQUAL FEDORA_RAWHIDE_VER) > > ++ > > ++ #Commit summary > > ++ IF (DEFINED CHANGE_SUMMARY) > > ++ SET (COMMIT_MSG "-m" "${CHANGE_SUMMARY}") > > ++ ELSE(DEFINED CHANGE_SUMMARY) > > ++ SET (COMMIT_MSG "-m" "On releasing ${PRJ_VER}-${PRJ_RELEASE_NO}") > > ++ ENDIF(DEFINED CHANGE_SUMMARY) > > ++ # Depends on tag file instead of target "tag" > > ++ # To avoid excessive scratch build and rpmlint > > ++ SET(_commit_opt --push --tag ) > > ++ > > ++ SET(_fedpkg_nvrd "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}") > > ++ SET(_fedpkg_nvrd_commit_file > > ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.commit") > > ++ > > ++ IF(_branch STREQUAL "master") > > ++ # Can't use ADD_CUSTOM_TARGET_COMMAND here, as the COMMIT_SUMMARY may have semi-colon ':' > > ++ ADD_CUSTOM_COMMAND(OUTPUT "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" > > ++ COMMAND test -d ${PROJECT_NAME} || ${FEDPKG_CMD} clone ${PROJECT_NAME} > > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > > ++ COMMAND ${GIT_CMD} pull --all > > ++ COMMAND ${FEDPKG_CMD} import "${PRJ_SRPM_FILE}" > > ++ COMMAND ${FEDPKG_CMD} commit ${_commit_opt} -m "${CHANGE_SUMMARY}" > > ++ COMMAND ${GIT_CMD} push --all > > ++ COMMAND ${CMAKE_COMMAND} -E touch "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" > > ++ DEPENDS "${FEDPKG_PRJ_DIR_GIT}" "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" "${PRJ_SRPM_FILE}" > > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > > ++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit > > ++ DEPENDS ${FEDPKG_NVR_RAWHIDE_COMMIT_FILE} > > ++ ) > > ++ ELSE(_branch STREQUAL "master") > > ++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_commit_file}" > > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > > ++ COMMAND ${GIT_CMD} pull > > ++ COMMAND ${GIT_CMD} merge -m "Merge branch 'master' into ${_branch}" master > > ++ COMMAND ${FEDPKG_CMD} push > > ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_commit_file}" > > ++ DEPENDS "${FEDPKG_NVR_RAWHIDE_COMMIT_FILE}" > > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > > ++ COMMENT "fedpkg commit on ${_branch} with ${PRJ_SRPM_FILE}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_commit > > ++ DEPENDS "${_fedpkg_nvrd_commit_file}" > > ++ ) > > ++ ENDIF(_branch STREQUAL "master") > > ++ > > ++ ## Fedpkg build > > ++ SET(_fedpkg_nvrd_build_file > > ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}") > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT "${_fedpkg_nvrd_build_file}" > > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > > ++ COMMAND ${FEDPKG_CMD} build > > ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}" > > ++ DEPENDS "${_fedpkg_nvrd_commit_file}" > > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > > ++ COMMENT "fedpkg build on ${_branch}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(fedpkg_${_branch}_build > > ++ DEPENDS "${_fedpkg_nvrd_build_file}" > > ++ ) > > ++ > > ++ ADD_DEPENDENCIES(bodhi_new fedpkg_${_branch}_build) > > ++ > > ++ ## Fedpkg update > > ++ SET(_fedpkg_nvrd_update_file > > ++ "${CMAKE_FEDORA_TMP_DIR}/${_fedpkg_nvrd}.update") > > ++ > > ++ ADD_CUSTOM_TARGET_COMMAND(fedpkg_${_branch}_update > > ++ OUTPUT "${_fedpkg_nvrd_update_file}" > > ++ COMMAND ${FEDPKG_CMD} switch-branch ${_branch} > > ++ COMMAND ${FEDPKG_CMD} update > > ++ COMMAND ${CMAKE_COMMAND} -E touch "${_fedpkg_nvrd_build_file}" > > ++ DEPENDS ${_fedpkg_nvrd_build_file} > > ++ WORKING_DIRECTORY ${FEDPKG_PRJ_DIR} > > ++ COMMENT "fedpkg build on ${_branch}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > > ++ ENDFUNCTION(RELEASE_ADD_FEDPKG_TARGETS tag) > > ++ > > ++ MACRO(_append_notes _file) > > ++ STRING(REGEX REPLACE "\n" "\n " _notes "${CHANGELOG_ITEMS}") > > ++ FILE(APPEND "${_file}" "notes=${_notes}\n\n") > > ++ ENDMACRO(_append_notes _file) > > ++ > > ++ FUNCTION(RELEASE_APPEND_BODHI_FILE tag) > > ++ IF(NOT _manage_release_fedora_dependencies_missing) > > ++ # Rawhide does not go to bodhi > > ++ IF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > > ++ _RELEASE_TO_BODHI_TAG(_bodhi_tag "${tag}") > > ++ > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "[${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.${_bodhi_tag}]\n\n") > > ++ > > ++ IF(BODHI_UPDATE_TYPE) > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=${BODHI_UPDATE_TYPE}\n\n") > > ++ ELSE(BODHI_UPDATE_TYPE) > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "type=bugfix\n\n") > > ++ ENDIF(BODHI_UPDATE_TYPE) > > ++ > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "request=testing\n") > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "bugs=${REDHAT_BUGZILLA}\n") > > ++ > > ++ _append_notes(${BODHI_TEMPLATE_FILE}) > > ++ > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "autokarma=${FEDORA_AUTO_KARMA}\n") > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "stable_karma=${FEDORA_KARMA}\n") > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "unstable_karma=${FEDORA_UNSTABLE_KARMA}\n") > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "close_bugs=True\n") > > ++ > > ++ IF(SUGGEST_REBOOT) > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=True\n") > > ++ ELSE(SUGGEST_REBOOT) > > ++ FILE(APPEND ${BODHI_TEMPLATE_FILE} "suggest_reboot=False\n\n") > > ++ ENDIF(SUGGEST_REBOOT) > > ++ ENDIF(NOT "${tag}" STREQUAL "f${FEDORA_RAWHIDE_VER}") > > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > > ++ ENDFUNCTION(RELEASE_APPEND_BODHI_FILE tag) > > ++ > > ++ FUNCTION(RELEASE_FEDORA) > > ++ IF(NOT _manage_release_fedora_dependencies_missing) > > ++ ## Parse tags > > ++ SET(_build_list "f${FEDORA_RAWHIDE_VER}") > > ++ FOREACH(_rel ${ARGN}) > > ++ IF(_rel STREQUAL "fedora") > > ++ FOREACH(_ver ${FEDORA_SUPPORTED_VERS}) > > ++ LIST(APPEND _build_list "f${_ver}") > > ++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS}) > > ++ ELSEIF(_rel STREQUAL "epel") > > ++ FOREACH(_ver ${EPEL_SUPPORTED_VERS}) > > ++ LIST(APPEND _build_list "el${_ver}") > > ++ ENDFOREACH(_ver ${FEDORA_SUPPORTED_VERS}) > > ++ ELSE(_rel STREQUAL "fedora") > > ++ LIST(APPEND _build_list "${_rel}") > > ++ ENDIF(_rel STREQUAL "fedora") > > ++ ENDFOREACH(_rel ${ARGN}) > > ++ LIST(REMOVE_DUPLICATES _build_list) > > ++ > > ++ IF(BODHI_USER) > > ++ SET(_bodhi_login "-u ${BODHI_USER}") > > ++ ENDIF(BODHI_USER) > > ++ > > ++ ADD_CUSTOM_TARGET(bodhi_new > > ++ COMMAND ${BODHI_CMD} --new ${_bodhi_login} --file ${BODHI_TEMPLATE_FILE} > > ++ DEPENDS "${BODHI_TEMPLATE_FILE}" > > ++ COMMENT "Submit new release to bodhi (Fedora)" > > ++ VERBATIM > > ++ ) > > ++ > > ++ # NVRD: Name-Version-Release-Dist > > ++ SET(FEDPKG_NVR_RAWHIDE "${PROJECT_NAME}-${PRJ_VER}-${PRJ_RELEASE_NO}.fc${FEDORA_RAWHIDE_VER}") > > ++ SET(FEDPKG_NVR_RAWHIDE_COMMIT_FILE "${CMAKE_FEDORA_TMP_DIR}/${FEDPKG_NVR_RAWHIDE}.commit") > > ++ > > ++ ## Create targets > > ++ FILE(REMOVE "${BODHI_TEMPLATE_FILE}") > > ++ RELEASE_ADD_KOJI_BUILD_SCRATCH(${_build_list}) > > ++ FOREACH(_tag ${_build_list}) > > ++ RELEASE_ADD_FEDPKG_TARGETS("${_tag}") > > ++ RELEASE_APPEND_BODHI_FILE("${_tag}") > > ++ ENDFOREACH(_tag ${_build_list}) > > ++ > > ++ ADD_CUSTOM_TARGET(release_fedora > > ++ COMMENT "Release for Fedora") > > ++ > > ++ ADD_DEPENDENCIES(release_fedora bodhi_new) > > ++ > > ++ ENDIF(NOT _manage_release_fedora_dependencies_missing) > > ++ ENDFUNCTION(RELEASE_FEDORA) > > ++ENDIF(NOT DEFINED _MANAGE_RELEASE_FEDORA_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageSourceVersionControl.cmake > > +@@ -0,0 +1,137 @@ > > ++# - Module for manipulate source version control systems. > > ++# This module provides an universal interface for supported > > ++# source version control systems, namely: > > ++# Git, Mercurial and SVN. > > ++# > > ++# Following targets are defined for each source version control (in Git terminology): > > ++# - tag: Tag the working tree with PRJ_VER and CHANGE_SUMMARY. > > ++# This target also does: > > ++# 1. Ensure there is nothing uncommitted. > > ++# 2. Push the commits and tags to server > > ++# - tag_pre: Targets that 'tag' depends on. > > ++# So you can push some check before the tag. > > ++# - after_release_commit: > > ++# This target does some post release chores, such as > > ++# updating ChangeLog.prev and RPM-ChangeLog.prev, then push them to server. > > ++# > > ++# Following variables are defined for each source version control: > > ++# - MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE: > > ++# The file that would be touched after target tag is completed. > > ++# > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_) > > ++ SET(_MANAGE_SOURCE_VERSION_CONTROL_CMAKE_ "DEFINED") > > ++ SET(_after_release_message "After released ${PRJ_VER}") > > ++ INCLUDE(ManageTarget) > > ++ > > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON) > > ++ ADD_CUSTOM_TARGET(tag_pre > > ++ COMMENT "Pre-tagging check" > > ++ ) > > ++ > > ++ > > ++ ADD_CUSTOM_TARGET(after_release_commit_pre > > ++ COMMENT "Before 'after_release_commit'" > > ++ ) > > ++ > > ++ IF(TARGET changelog_prev_update) > > ++ ADD_DEPENDENCIES(after_release_commit_pre changelog_prev_update) > > ++ ENDIF(TARGET changelog_prev_update) > > ++ > > ++ IF(TARGET rpm_changelog_prev_update) > > ++ ADD_DEPENDENCIES(after_release_commit_pre rpm_changelog_prev_update) > > ++ ENDIF(TARGET rpm_changelog_prev_update) > > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_COMMON) > > ++ > > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT) > > ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE > > ++ ${CMAKE_SOURCE_DIR}/.git/refs/tags/${PRJ_VER} > > ++ CACHE PATH "Source Version Control Tag File" FORCE) > > ++ > > ++ ADD_CUSTOM_TARGET(after_release_commit > > ++ COMMAND make after_release_commit_pre > > ++ COMMAND git commit -a -m "${_after_release_message}" > > ++ COMMAND git push > > ++ COMMENT "After released ${PRJ_VER}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ # Can't use ADD_CUSTOM_TARGET here, as the COMMIT_SUMMARY may have semi-colon ':' > > ++ ADD_CUSTOM_TARGET(tag > > ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(commit_clean > > ++ COMMAND git diff --exit-code > > ++ COMMENT "Is git commit clean?" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE} > > ++ COMMAND make commit_clean > > ++ COMMAND make tag_pre > > ++ COMMAND git tag -a -m "${CHANGE_SUMMARY}" "${PRJ_VER}" HEAD > > ++ COMMENT "Tagging the source as ver ${PRJ_VER}" > > ++ VERBATIM > > ++ ) > > ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() > > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_GIT) > > ++ > > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_HG) > > ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE > > ++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER} > > ++ CACHE PATH "Source Version Control Tag File" FORCE) > > ++ > > ++ ADD_CUSTOM_TARGET(after_release_commit > > ++ COMMAND make after_release_commit_pre > > ++ COMMAND hg commit -m "${_after_release_message}" > > ++ COMMAND hg push > > ++ COMMENT "After released ${PRJ_VER}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(tag > > ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > > ++ ) > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > > ++ COMMAND make tag_pre > > ++ COMMAND hg tag -m "${CHANGE_SUMMARY}" "${PRJ_VER}" > > ++ COMMAND ${CMAKE_COMMAND} -E touch "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > > ++ COMMENT "Tagging the source as ver ${PRJ_VER}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() > > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_HG) > > ++ > > ++ MACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN) > > ++ SET(MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE > > ++ ${CMAKE_FEDORA_TEMP_DIR}/${PRJ_VER} > > ++ CACHE PATH "Source Version Control Tag File" FORCE) > > ++ > > ++ ADD_CUSTOM_TARGET(after_release_commit > > ++ COMMAND make after_release_commit_pre > > ++ COMMAND svn commit -m "${_after_release_message}" > > ++ COMMENT "After released ${PRJ_VER}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(tag > > ++ DEPENDS "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(OUTPUT "${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE}" > > ++ COMMAND make tag_pre > > ++ COMMAND svn copy "${SOURCE_BASE_URL}/trunk" "${SOURCE_BASE_URL}/tags/${PRJ_VER}" -m "${CHANGE_SUMMARY}" > > ++ COMMAND cmake -E touch ${MANAGE_SOURCE_VERSION_CONTROL_TAG_FILE} > > ++ COMMENT "Tagging the source as ver ${PRJ_VER}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ MANAGE_SOURCE_VERSION_CONTROL_COMMON() > > ++ ENDMACRO(MANAGE_SOURCE_VERSION_CONTROL_SVN) > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_SOURCE_VERSION_CONTROL_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageString.cmake > > +@@ -0,0 +1,325 @@ > > ++# - Collection of String utility macros. > > ++# > > ++# Included by: > > ++# ManageVarible > > ++# > > ++# Defines the following macros: > > ++# STRING_TRIM(var str [NOUNQUOTE]) > > ++# - Trim a string by removing the leading and trailing spaces, > > ++# just like STRING(STRIP ...) in CMake 2.6 and later. > > ++# This macro is needed as CMake 2.4 does not support STRING(STRIP ..) > > ++# This macro also remove quote and double quote marks around the string, > > ++# unless NOUNQUOTE is defined. > > ++# * Parameters: > > ++# + var: A variable that stores the result. > > ++# + str: A string. > > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > > ++# > > ++# STRING_ESCAPE_SEMICOLON(var str) > > ++# - Escape the semicolon > > ++# * Parameters: > > ++# + var: A variable that stores the result. > > ++# + str: A string. > > ++# > > ++# STRING_UNQUOTE(var str) > > ++# - Remove double quote marks and quote marks around a string. > > ++# If the string is not quoted, then content of str is copied to var > > ++# * Parameters: > > ++# + var: A variable that stores the result. > > ++# + str: A string. > > ++# > > ++# STRING_JOIN(var delimiter str_list [str...]) > > ++# - Concatenate strings, with delimiter inserted between strings. > > ++# * Parameters: > > ++# + var: A variable that stores the result. > > ++# + str_list: A list of string. > > ++# + str: (Optional) more string to be join. > > ++# > > ++# STRING_SPLIT(var delimiter str [NOESCAPE_SEMICOLON]) > > ++# - Split a string into a list using a delimiter, which can be in 1 or more > > ++# characters long. > > ++# * Parameters: > > ++# + var: A variable that stores the result. > > ++# + delimiter: To separate a string. > > ++# + str: A string. > > ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_STRING_CMAKE_) > > ++ SET(_MANAGE_STRING_CMAKE_ "DEFINED") > > ++ > > ++ # Return (index of lefttmost non match character) > > ++ # Return _strLen if all characters matches regex > > ++ FUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str regex) > > ++ STRING(LENGTH "${str}" _strLen) > > ++ SET(_index 0) > > ++ SET(_ret ${_strLen}) > > ++ WHILE(_index LESS _strLen) > > ++ STRING(SUBSTRING "${str}" ${_index} 1 _strCursor) > > ++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}") > > ++ IF(NOT "${_strCursor}" MATCHES "${regex}") > > ++ SET(_ret ${_index}) > > ++ SET(_index ${_strLen}) > > ++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}") > > ++ > > ++ MATH(EXPR _index ${_index}+1) > > ++ ENDWHILE(_index LESS _strLen) > > ++ SET(${var} ${_ret} PARENT_SCOPE) > > ++ ENDFUNCTION(STRING_LEFTMOST_NOTMATCH_INDEX var str) > > ++ > > ++ # Return (index of rightmost non match character) +1 > > ++ # Return 0 if all characters matches regex > > ++ # > > ++ FUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str regex) > > ++ STRING(LENGTH "${str}" _strLen) > > ++ MATH(EXPR _index ${_strLen}) > > ++ SET(_ret 0) > > ++ WHILE(_index GREATER 0) > > ++ MATH(EXPR _index_1 ${_index}-1) > > ++ STRING(SUBSTRING "${str}" ${_index_1} 1 _strCursor) > > ++ #MESSAGE("***STRING_UNQUOTE: _i=${_index} _strCursor=${_strCursor}") > > ++ > > ++ IF(NOT "${_strCursor}" MATCHES "${regex}") > > ++ SET(_ret ${_index}) > > ++ SET(_index 0) > > ++ ENDIF(NOT "${_strCursor}" MATCHES "${regex}") > > ++ MATH(EXPR _index ${_index}-1) > > ++ ENDWHILE(_index GREATER 0) > > ++ SET(${var} ${_ret} PARENT_SCOPE) > > ++ ENDFUNCTION(STRING_RIGHTMOST_NOTMATCH_INDEX var str) > > ++ > > ++ FUNCTION(STRING_TRIM var str) > > ++ #_STRING_ESCAPE(_ret "${str}" ${ARGN}) > > ++ STRING_LEFTMOST_NOTMATCH_INDEX(_leftIndex "${str}" "[ \t\n\r]") > > ++ STRING_RIGHTMOST_NOTMATCH_INDEX(_rightIndex "${str}" "[ \t\n\r]") > > ++ #MESSAGE("_left=${_leftIndex} _rightIndex=${_rightIndex} str=|${str}|") > > ++ MATH(EXPR _subLen ${_rightIndex}-${_leftIndex}) > > ++ SET(_NOUNQUOTE 0) > > ++ FOREACH( _arg ${ARGN}) > > ++ IF(_arg STREQUAL "NOUNQUOTE") > > ++ SET(_NOUNQUOTE 1) > > ++ ENDIF(_arg STREQUAL "NOUNQUOTE") > > ++ ENDFOREACH( _arg ${ARGN}) > > ++ > > ++ IF(_subLen GREATER 0) > > ++ STRING(SUBSTRING "${str}" ${_leftIndex} ${_subLen} _ret) > > ++ # IF _subLen > 1 > > ++ # IF UNQUOTE; then unquote > > ++ # Otherwise don't touch > > ++ IF (_subLen GREATER 1) > > ++ IF(NOT _NOUNQUOTE) > > ++ STRING_UNQUOTE(_ret "${_ret}") > > ++ ENDIF(NOT _NOUNQUOTE) > > ++ ENDIF (_subLen GREATER 1) > > ++ ELSE(_subLen GREATER 0) > > ++ SET(_ret "") > > ++ ENDIF(_subLen GREATER 0) > > ++ SET(${var} "${_ret}" PARENT_SCOPE) > > ++ > > ++ # Unencoding > > ++ #_STRING_UNESCAPE(${var} "${_ret}" ${ARGN}) > > ++ ENDFUNCTION(STRING_TRIM var str) > > ++ > > ++ MACRO(STRING_ESCAPE_SEMICOLON var str) > > ++ STRING(REGEX REPLACE ";" "\\\\;" ${var} "${str}") > > ++ ENDMACRO(STRING_ESCAPE_SEMICOLON var str) > > ++ > > ++ # Internal macro > > ++ # Nested Variable cannot be escaped here, as variable is already substituted > > ++ # at the time it passes to this macro. > > ++ MACRO(_STRING_ESCAPE var str) > > ++ # ';' and '\' are tricky, need to be encoded. > > ++ # '#' => '#H' > > ++ # '\' => '#B' > > ++ # ';' => '#S' > > ++ SET(_NOESCAPE_SEMICOLON "") > > ++ SET(_NOESCAPE_HASH "") > > ++ > > ++ FOREACH(_arg ${ARGN}) > > ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") > > ++ ELSEIF(${_arg} STREQUAL "NOESCAPE_HASH") > > ++ SET(_NOESCAPE_HASH "NOESCAPE_HASH") > > ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ > > ++ IF(_NOESCAPE_HASH STREQUAL "") > > ++ STRING(REGEX REPLACE "#" "#H" _ret "${str}") > > ++ ELSE(_NOESCAPE_HASH STREQUAL "") > > ++ SET(_ret "${str}") > > ++ ENDIF(_NOESCAPE_HASH STREQUAL "") > > ++ > > ++ STRING(REGEX REPLACE "\\\\" "#B" _ret "${_ret}") > > ++ IF(_NOESCAPE_SEMICOLON STREQUAL "") > > ++ STRING(REGEX REPLACE ";" "#S" _ret "${_ret}") > > ++ ENDIF(_NOESCAPE_SEMICOLON STREQUAL "") > > ++ #MESSAGE("_STRING_ESCAPE:_ret=${_ret}") > > ++ SET(${var} "${_ret}") > > ++ ENDMACRO(_STRING_ESCAPE var str) > > ++ > > ++ MACRO(_STRING_UNESCAPE var str) > > ++ # '#B' => '\' > > ++ # '#H' => '#' > > ++ # '#D' => '$' > > ++ # '#S' => ';' > > ++ SET(_ESCAPE_VARIABLE "") > > ++ SET(_NOESCAPE_SEMICOLON "") > > ++ SET(_ret "${str}") > > ++ FOREACH(_arg ${ARGN}) > > ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") > > ++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE") > > ++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE") > > ++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}") > > ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ #MESSAGE("###_STRING_UNESCAPE: var=${var} _ret=${_ret} _NOESCAPE_SEMICOLON=${_NOESCAPE_SEMICOLON} ESCAPE_VARIABLE=${_ESCAPE_VARIABLE}") > > ++ > > ++ STRING(REGEX REPLACE "#B" "\\\\" _ret "${_ret}") > > ++ IF("${_NOESCAPE_SEMICOLON}" STREQUAL "") > > ++ # ESCAPE_SEMICOLON > > ++ STRING(REGEX REPLACE "#S" "\\\\;" _ret "${_ret}") > > ++ ELSE("${_NOESCAPE_SEMICOLON}" STREQUAL "") > > ++ # Don't ESCAPE_SEMICOLON > > ++ STRING(REGEX REPLACE "#S" ";" _ret "${_ret}") > > ++ ENDIF("${_NOESCAPE_SEMICOLON}" STREQUAL "") > > ++ > > ++ IF(NOT _ESCAPE_VARIABLE STREQUAL "") > > ++ # '#D' => '$' > > ++ STRING(REGEX REPLACE "#D" "$" _ret "${_ret}") > > ++ ENDIF(NOT _ESCAPE_VARIABLE STREQUAL "") > > ++ STRING(REGEX REPLACE "#H" "#" _ret "${_ret}") > > ++ SET(${var} "${_ret}") > > ++ #MESSAGE("*** _STRING_UNESCAPE: ${var}=${${var}}") > > ++ ENDMACRO(_STRING_UNESCAPE var str) > > ++ > > ++ MACRO(STRING_UNQUOTE var str) > > ++ SET(_ret "${str}") > > ++ STRING(LENGTH "${str}" _strLen) > > ++ > > ++ # IF _strLen > 1 > > ++ # IF lCh and rCh are both "\"" > > ++ # Remove _lCh and _rCh > > ++ # ELSEIF lCh and rCh are both "'" > > ++ # Remove _lCh and _rCh > > ++ # Otherwise don't touch > > ++ IF(_strLen GREATER 1) > > ++ STRING(SUBSTRING "${str}" 0 1 _lCh) > > ++ MATH(EXPR _strLen_1 ${_strLen}-1) > > ++ MATH(EXPR _strLen_2 ${_strLen_1}-1) > > ++ STRING(SUBSTRING "${str}" ${_strLen_1} 1 _rCh) > > ++ #MESSAGE("_lCh=${_lCh} _rCh=${_rCh} _ret=|${_ret}|") > > ++ IF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"") > > ++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret) > > ++ ELSEIF("${_lCh}" STREQUAL "'" AND "${_rCh}" STREQUAL "'") > > ++ STRING(SUBSTRING "${_ret}" 1 ${_strLen_2} _ret) > > ++ ENDIF("${_lCh}" STREQUAL "\"" AND "${_rCh}" STREQUAL "\"") > > ++ ENDIF (_strLen GREATER 1) > > ++ SET(${var} "${_ret}") > > ++ ENDMACRO(STRING_UNQUOTE var str) > > ++ > > ++ MACRO(STRING_JOIN var delimiter str_list) > > ++ SET(_ret "") > > ++ FOREACH(_str ${str_list}) > > ++ IF(_ret STREQUAL "") > > ++ SET(_ret "${_str}") > > ++ ELSE(_ret STREQUAL "") > > ++ SET(_ret "${_ret}${delimiter}${_str}") > > ++ ENDIF(_ret STREQUAL "") > > ++ ENDFOREACH(_str ${str_list}) > > ++ > > ++ FOREACH(_str ${ARGN}) > > ++ IF(_ret STREQUAL "") > > ++ SET(_ret "${_str}") > > ++ ELSE(_ret STREQUAL "") > > ++ SET(_ret "${_ret}${delimiter}${_str}") > > ++ ENDIF(_ret STREQUAL "") > > ++ ENDFOREACH(_str ${ARGN}) > > ++ SET(${var} "${_ret}") > > ++ ENDMACRO(STRING_JOIN var delimiter str_list) > > ++ > > ++ FUNCTION(STRING_FIND var str search_str) > > ++ STRING(LENGTH "${str}" _str_len) > > ++ STRING(LENGTH "${search_str}" _search_len) > > ++ MATH(EXPR _str_end ${_str_len}-${_search_len}+1) > > ++ > > ++ SET(_index 0) > > ++ SET(_str_remain "") > > ++ SET(_result -1) > > ++ WHILE(_index LESS _str_end) > > ++ STRING(SUBSTRING "${str}" ${_index} ${_search_len} _str_window) > > ++ IF("${_str_window}" STREQUAL "${search_str}") > > ++ SET(_result ${_index}) > > ++ BREAK() > > ++ ELSE("${_str_window}" STREQUAL "${search_str}") > > ++ MATH(EXPR _index ${_index}+1) > > ++ ENDIF("${_str_window}" STREQUAL "${search_str}") > > ++ ENDWHILE(_index LESS _str_end) > > ++ SET(${var} ${_result} PARENT_SCOPE) > > ++ ENDFUNCTION(STRING_FIND var str search) > > ++ > > ++ FUNCTION(STRING_SPLIT_2 var str_remain delimiter str) > > ++ STRING_FIND(_index "${str}" "${delimiter}") > > ++ IF(_index EQUAL -1) > > ++ SET(${var} "${str}" PARENT_SCOPE) > > ++ SET(${str_remain} "" PARENT_SCOPE) > > ++ ELSE(_index EQUAL -1) > > ++ STRING(SUBSTRING "${str}" 0 ${_index} _var) > > ++ SET(${var} "${_var}" PARENT_SCOPE) > > ++ > > ++ STRING(LENGTH "${str}" _str_len) > > ++ STRING(LENGTH "${delimiter}" _delimiter_len) > > ++ MATH(EXPR _str_2_start ${_index}+${_delimiter_len}) > > ++ MATH(EXPR _str_2_len ${_str_len}-${_index}-${_delimiter_len}) > > ++ STRING(SUBSTRING "${str}" ${_str_2_start} ${_str_2_len} _str_remain) > > ++ SET(${str_remain} "${_str_remain}" PARENT_SCOPE) > > ++ ENDIF(_index EQUAL -1) > > ++ ENDFUNCTION(STRING_SPLIT_2 var str_remain delimiter str) > > ++ > > ++ MACRO(STRING_SPLIT var delimiter str) > > ++ #MESSAGE("***STRING_SPLIT: var=${var} str=${str}") > > ++ SET(_max_tokens "") > > ++ SET(_NOESCAPE_SEMICOLON "") > > ++ SET(_ESCAPE_VARIABLE "") > > ++ FOREACH(_arg ${ARGN}) > > ++ IF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ SET(_NOESCAPE_SEMICOLON "NOESCAPE_SEMICOLON") > > ++ ELSEIF(${_arg} STREQUAL "ESCAPE_VARIABLE") > > ++ SET(_ESCAPE_VARIABLE "ESCAPE_VARIABLE") > > ++ ELSE(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ SET(_max_tokens ${_arg}) > > ++ ENDIF(${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ > > ++ IF(NOT _max_tokens) > > ++ SET(_max_tokens -1) > > ++ ENDIF(NOT _max_tokens) > > ++ > > ++ _STRING_ESCAPE(_str "${str}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) > > ++ _STRING_ESCAPE(_delimiter "${delimiter}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) > > ++ SET(_str_list "") > > ++ SET(_token_count 1) > > ++ > > ++ WHILE(NOT _token_count EQUAL _max_tokens) > > ++ STRING_SPLIT_2(_token _str "${_delimiter}" "${_str}") > > ++ #MESSAGE("_token_count=${_token_count} _max_tokens=${_max_tokens} _token=${_token} _str=${_str}") > > ++ MATH(EXPR _token_count ${_token_count}+1) > > ++ LIST(APPEND _str_list "${_token}") > > ++ IF("${_str}" STREQUAL "") > > ++ ## No more tokens > > ++ BREAK() > > ++ ENDIF("${_str}" STREQUAL "") > > ++ ENDWHILE(NOT _token_count EQUAL _max_tokens) > > ++ > > ++ IF(NOT "x${_str}" STREQUAL "x") > > ++ ## Append last part > > ++ LIST(APPEND _str_list "${_str}") > > ++ ENDIF(NOT "x${_str}" STREQUAL "x") > > ++ > > ++ # Unencoding > > ++ _STRING_UNESCAPE(${var} "${_str_list}" ${_NOESCAPE_SEMICOLON} ${_ESCAPE_VARIABLE}) > > ++ #MESSAGE("***STRING_SPLIT: tokens=${${var}}") > > ++ ENDMACRO(STRING_SPLIT var delimiter str) > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_STRING_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageTarget.cmake > > +@@ -0,0 +1,40 @@ > > ++# - Modules for managing targets and outputs. > > ++# > > ++# Defines following macros: > > ++# ADD_CUSTOM_TARGET_COMMAND(target OUTPUT file1 [file2 ..] COMMAND > > ++# command1 ...) > > ++# - Combine ADD_CUSTOM_TARGET and ADD_CUSTOM_COMMAND. > > ++# Always build when making the target, also specify the output files > > ++# Arguments: > > ++# + target: target for this command > > ++# + file1, file2 ... : Files to be outputted by this command > > ++# + command1 ... : Command to be run. The rest arguments are same with > > ++# ADD_CUSTOM_TARGET. > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_TARGET_CMAKE_) > > ++ SET(_MANAGE_TARGET_CMAKE_ "DEFINED") > > ++ MACRO(ADD_CUSTOM_TARGET_COMMAND target OUTPUT) > > ++ SET(_outputFileList "") > > ++ SET(_optionList "") > > ++ SET(_outputFileMode 1) > > ++ FOREACH(_t ${ARGN}) > > ++ IF(_outputFileMode) > > ++ IF(_t STREQUAL "COMMAND") > > ++ SET(_outputFileMode 0) > > ++ LIST(APPEND _optionList "${_t}") > > ++ ELSE(_t STREQUAL "COMMAND") > > ++ LIST(APPEND _outputFileList "${_t}") > > ++ ENDIF(_t STREQUAL "COMMAND") > > ++ ELSE(_outputFileMode) > > ++ LIST(APPEND _optionList "${_t}") > > ++ ENDIF(_outputFileMode) > > ++ ENDFOREACH(_t ${ARGN}) > > ++ #MESSAGE("ADD_CUSTOM_TARGET(${target} ${_optionList})") > > ++ ADD_CUSTOM_TARGET(${target} ${_optionList}) > > ++ #MESSAGE("ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList})") > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_outputFileList} ${_optionList}) > > ++ ENDMACRO(ADD_CUSTOM_TARGET_COMMAND) > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_TARGET_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageTranslation.cmake > > +@@ -0,0 +1,305 @@ > > ++# - Software Translation support > > ++# This module supports software translation by: > > ++# 1) Creates gettext related targets. > > ++# 2) Communicate to Zanata servers. > > ++# > > ++# Defines following targets: > > ++# + translations: Make the translation files. > > ++# This target itself does nothing but provide a target for others to > > ++# depend on. > > ++# If macro MANAGE_GETTEXT is used, then it depends on the target gmo_files. > > ++# > > ++# Defines following variables: > > ++# + XGETTEXT_OPTIONS_C: Usual xgettext options for C programs. > > ++# > > ++# Defines following macros: > > ++# MANAGE_GETTEXT [ALL] SRCS src1 [src2 [...]] > > ++# [LOCALES locale1 [locale2 [...]]] > > ++# [POTFILE potfile] > > ++# [XGETTEXT_OPTIONS xgettextOpt]] > > ++# ) > > ++# - Provide Gettext support like pot file generation and > > ++# gmo file generation. > > ++# You can specify supported locales with LOCALES ... > > ++# or omit the locales to use all the po files. > > ++# > > ++# Arguments: > > ++# + ALL: (Optional) make target "all" depends on gettext targets. > > ++# + SRCS src1 [src2 [...]]: File list of source code that contains msgid. > > ++# + LOCALES locale1 [local2 [...]]:(optional) Locale list to be generated. > > ++# Currently, only the format: lang_Region (such as fr_FR) is supported. > > ++# + POTFILE potFile: (optional) pot file to be referred. > > ++# Default: ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot > > ++# + XGETTEXT_OPTIONS xgettextOpt: (optional) xgettext_options. > > ++# Default: ${XGETTEXT_OPTIONS_C} > > ++# Defines following variables: > > ++# + GETTEXT_MSGMERGE_CMD: the full path to the msgmerge tool. > > ++# + GETTEXT_MSGFMT_CMD: the full path to the msgfmt tool. > > ++# + XGETTEXT_CMD: the full path to the xgettext. > > ++# Targets: > > ++# + pot_file: Generate the pot_file. > > ++# + gmo_files: Converts input po files into the binary output mo files. > > ++# > > ++# MANAGE_ZANATA(serverUrl [YES]) > > ++# - Use Zanata (was flies) as translation service. > > ++# Arguments: > > ++# + serverUrl: The URL of Zanata server > > ++# + YES: Assume yes for all questions. > > ++# Reads following variables: > > ++# + ZANATA_XML_FILE: Path to zanata.xml > > ++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml > > ++# + ZANATA_INI_FILE: Path to zanata.ini > > ++# Default:${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml > > ++# + ZANATA_PUSH_OPTIONS: Options for zanata push > > ++# + ZANATA_PULL_OPTIONS: Options for zanata pull > > ++# Targets: > > ++# + zanata_project_create: Create project with PROJECT_NAME in zanata > > ++# server. > > ++# + zanata_version_create: Create version PRJ_VER in zanata server. > > ++# + zanata_push: Push source messages to zanata server > > ++# + zanata_push_trans: Push source messages and translations to zanata server. > > ++# + zanata_pull: Pull translations from zanata server. > > ++# > > ++ > > ++ > > ++IF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_) > > ++ SET(_MANAGE_TRANSLATION_CMAKE_ "DEFINED") > > ++ SET(XGETTEXT_OPTIONS_C > > ++ --language=C --keyword=_ --keyword=N_ --keyword=C_:1c,2 --keyword=NC_:1c,2 -s > > ++ --package-name=${PROJECT_NAME} --package-version=${PRJ_VER}) > > ++ SET(MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS "--indent" "--update" "--backup=none" CACHE STRING "msgmerge options") > > ++ SET_DIRECTORY_PROPERTIES(PROPERTIES CLEAN_NO_CUSTOM "1") > > ++ > > ++ INCLUDE(ManageMessage) > > ++ IF(NOT TARGET translations) > > ++ ADD_CUSTOM_TARGET(translations > > ++ COMMENT "Making translations" > > ++ ) > > ++ ENDIF(NOT TARGET translations) > > ++ > > ++ #======================================== > > ++ # GETTEXT support > > ++ > > ++ MACRO(MANAGE_GETTEXT_INIT) > > ++ FIND_PROGRAM(XGETTEXT_CMD xgettext) > > ++ IF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND") > > ++ SET(_gettext_dependency_missing 1) > > ++ M_MSG(${M_OFF} "xgettext not found! gettext support disabled.") > > ++ ENDIF(XGETTEXT_CMD STREQUAL "XGETTEXT_CMD-NOTFOUND") > > ++ > > ++ FIND_PROGRAM(GETTEXT_MSGMERGE_CMD msgmerge) > > ++ IF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND") > > ++ SET(_gettext_dependency_missing 1) > > ++ M_MSG(${M_OFF} "msgmerge not found! gettext support disabled.") > > ++ ENDIF(GETTEXT_MSGMERGE_CMD STREQUAL "GETTEXT_MSGMERGE_CMD-NOTFOUND") > > ++ > > ++ FIND_PROGRAM(GETTEXT_MSGFMT_CMD msgfmt) > > ++ IF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND") > > ++ SET(_gettext_dependency_missing 1) > > ++ M_MSG(${M_OFF} "msgfmt not found! gettext support disabled.") > > ++ ENDIF(GETTEXT_MSGFMT_CMD STREQUAL "GETTEXT_MSGFMT_CMD-NOTFOUND") > > ++ > > ++ ENDMACRO(MANAGE_GETTEXT_INIT) > > ++ > > ++ FUNCTION(MANAGE_GETTEXT) > > ++ SET(_gettext_dependency_missing 0) > > ++ MANAGE_GETTEXT_INIT() > > ++ IF(NOT _gettext_dependency_missing) > > ++ SET(_stage "") > > ++ SET(_all "") > > ++ SET(_srcList "") > > ++ SET(_srcList_abs "") > > ++ SET(_localeList "") > > ++ SET(_potFile "") > > ++ SET(_xgettext_option_list "") > > ++ FOREACH(_arg ${ARGN}) > > ++ IF(_arg STREQUAL "ALL") > > ++ SET(_all "ALL") > > ++ ELSEIF(_arg STREQUAL "SRCS") > > ++ SET(_stage "SRCS") > > ++ ELSEIF(_arg STREQUAL "LOCALES") > > ++ SET(_stage "LOCALES") > > ++ ELSEIF(_arg STREQUAL "XGETTEXT_OPTIONS") > > ++ SET(_stage "XGETTEXT_OPTIONS") > > ++ ELSEIF(_arg STREQUAL "POTFILE") > > ++ SET(_stage "POTFILE") > > ++ ELSE(_arg STREQUAL "ALL") > > ++ IF(_stage STREQUAL "SRCS") > > ++ FILE(RELATIVE_PATH _relFile ${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/${_arg}) > > ++ LIST(APPEND _srcList ${_relFile}) > > ++ GET_FILENAME_COMPONENT(_absPoFile ${_arg} ABSOLUTE) > > ++ LIST(APPEND _srcList_abs ${_absPoFile}) > > ++ ELSEIF(_stage STREQUAL "LOCALES") > > ++ LIST(APPEND _localeList ${_arg}) > > ++ ELSEIF(_stage STREQUAL "XGETTEXT_OPTIONS") > > ++ LIST(APPEND _xgettext_option_list ${_arg}) > > ++ ELSEIF(_stage STREQUAL "POTFILE") > > ++ SET(_potFile "${_arg}") > > ++ ELSE(_stage STREQUAL "SRCS") > > ++ M_MSG(${M_WARN} "MANAGE_GETTEXT: not recognizing arg ${_arg}") > > ++ ENDIF(_stage STREQUAL "SRCS") > > ++ ENDIF(_arg STREQUAL "ALL") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ > > ++ # Default values > > ++ IF(_xgettext_option_list STREQUAL "") > > ++ SET(_xgettext_option_list ${XGETTEXT_OPTIONS_C}) > > ++ ENDIF(_xgettext_option_list STREQUAL "") > > ++ > > ++ IF(_potFile STREQUAL "") > > ++ SET(_potFile "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.pot") > > ++ ENDIF(_potFile STREQUAL "") > > ++ > > ++ IF(NOT _localeList) > > ++ FILE(GLOB _poFiles "*.po") > > ++ FOREACH(_poFile ${_poFiles}) > > ++ GET_FILENAME_COMPONENT(_locale "${_poFile}" NAME_WE) > > ++ LIST(APPEND _localeList "${_locale}") > > ++ ENDFOREACH(_poFile ${_poFiles}) > > ++ ENDIF(NOT _localeList) > > ++ > > ++ M_MSG(${M_INFO2} "XGETTEXT=${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList}") > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_potFile} > > ++ COMMAND ${XGETTEXT_CMD} ${_xgettext_option_list} -o ${_potFile} ${_srcList} > > ++ DEPENDS ${_srcList_abs} > > ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} > > ++ COMMENT "Extract translatable messages to ${_potFile}" > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(pot_file ${_all} > > ++ DEPENDS ${_potFile} > > ++ ) > > ++ > > ++ ### Generating gmo files > > ++ SET(_gmoFileList "") > > ++ SET(_absGmoFileList "") > > ++ SET(_absPoFileList "") > > ++ GET_FILENAME_COMPONENT(_potBasename ${_potFile} NAME_WE) > > ++ GET_FILENAME_COMPONENT(_potDir ${_potFile} PATH) > > ++ GET_FILENAME_COMPONENT(_absPotFile ${_potFile} ABSOLUTE) > > ++ GET_FILENAME_COMPONENT(_absPotDir ${_absPotFile} PATH) > > ++ FOREACH(_locale ${_localeList}) > > ++ SET(_absGmoFile ${_absPotDir}/${_locale}.gmo) > > ++ SET(_absPoFile ${_absPotDir}/${_locale}.po) > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_absPoFile} > > ++ COMMAND ${GETTEXT_MSGMERGE_CMD} > > ++ ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile} > > ++ DEPENDS ${_potFile} > > ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} > > ++ COMMENT "${GETTEXT_MSGMERGE_CMD} ${MANAGE_TRANSLATION_GETTEXT_MSGMERGE_OPTIONS} ${_absPoFile} ${_potFile}" > > ++ ) > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${_absGmoFile} > > ++ COMMAND ${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile} > > ++ DEPENDS ${_absPoFile} > > ++ WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} > > ++ COMMENT "${GETTEXT_MSGFMT_CMD} -o ${_absGmoFile} ${_absPoFile}" > > ++ ) > > ++ > > ++ #MESSAGE("_absPoFile=${_absPoFile} _absPotDir=${_absPotDir} _lang=${_lang} curr_bin=${CMAKE_CURRENT_BINARY_DIR}") > > ++ INSTALL(FILES ${_absGmoFile} DESTINATION share/locale/${_locale}/LC_MESSAGES RENAME ${_potBasename}.mo) > > ++ LIST(APPEND _absGmoFileList ${_absGmoFile}) > > ++ LIST(APPEND _absPoFileList ${_absPoFile}) > > ++ ENDFOREACH(_locale ${_localeList}) > > ++ SET_DIRECTORY_PROPERTIES(PROPERTIES ADDITIONAL_MAKE_CLEAN_FILES "${_absGmoFileList};${_potFile}" ) > > ++ > > ++ SET(MANAGE_TRANSLATION_GETTEXT_PO_FILES ${_absPoFileList} CACHE STRING "PO files") > > ++ > > ++ ADD_CUSTOM_TARGET(gmo_files ${_all} > > ++ DEPENDS ${_absGmoFileList} > > ++ COMMENT "Generate gmo files for translation" > > ++ ) > > ++ > > ++ ADD_DEPENDENCIES(translations gmo_files) > > ++ ENDIF(NOT _gettext_dependency_missing) > > ++ ENDFUNCTION(MANAGE_GETTEXT) > > ++ > > ++ > > ++ #======================================== > > ++ # ZANATA support > > ++ MACRO(MANAGE_ZANATA serverUrl) > > ++ SET(ZANATA_SERVER "${serverUrl}") > > ++ FIND_PROGRAM(ZANATA_CMD zanata) > > ++ SET(_manage_zanata_dependencies_missing 0) > > ++ IF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND") > > ++ SET(_manage_zanata_dependencies_missing 1) > > ++ M_MSG(${M_OFF} "zanata (python client) not found! zanata support disabled.") > > ++ ENDIF(ZANATA_CMD STREQUAL "ZANATA_CMD-NOTFOUND") > > ++ > > ++ SET(ZANATA_XML_FILE "${CMAKE_CURRENT_SOURCE_DIR}/zanata.xml" CACHE FILEPATH "zanata.xml") > > ++ IF(NOT EXISTS "${ZANATA_XML_FILE}") > > ++ SET(_manage_zanata_dependencies_missing 1) > > ++ M_MSG(${M_OFF} "zanata.xml is not found! Zanata support disabled.") > > ++ ENDIF(NOT EXISTS "${ZANATA_XML_FILE}") > > ++ > > ++ SET(ZANATA_INI_FILE "$ENV{HOME}/.config/zanata.ini" CACHE FILEPATH "zanata.ni") > > ++ IF(NOT EXISTS "${ZANATA_INI_FILE}") > > ++ SET(_manage_zanata_dependencies_missing 1) > > ++ M_MSG(${M_OFF} "zanata.ini is not found! Zanata support disabled.") > > ++ ENDIF(NOT EXISTS "${ZANATA_INI_FILE}") > > ++ > > ++ IF(NOT _manage_zanata_dependencies_missing) > > ++ SET(_zanata_args --url "${ZANATA_SERVER}" > > ++ --project-config "${ZANATA_XML_FILE}" --user-config "${ZANATA_INI_FILE}") > > ++ > > ++ # Parsing arguments > > ++ SET(_yes "") > > ++ FOREACH(_arg ${ARGN}) > > ++ IF(_arg STREQUAL "YES") > > ++ SET(_yes "yes" "|") > > ++ ENDIF(_arg STREQUAL "YES") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ > > ++ ADD_CUSTOM_TARGET(zanata_project_create > > ++ COMMAND ${ZANATA_CMD} project create ${PROJECT_NAME} ${_zanata_args} > > ++ --project-name "${PROJECT_NAME}" --project-desc "${PRJ_SUMMARY}" > > ++ COMMENT "Creating project ${PROJECT_NAME} on Zanata server ${serverUrl}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(zanata_version_create > > ++ COMMAND ${ZANATA_CMD} version create > > ++ ${PRJ_VER} ${_zanata_args} --project-id "${PROJECT_NAME}" > > ++ COMMENT "Creating version ${PRJ_VER} on Zanata server ${serverUrl}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ SET(_po_files_depend "") > > ++ IF(MANAGE_TRANSLATION_GETTEXT_PO_FILES) > > ++ SET(_po_files_depend "DEPENDS" ${MANAGE_TRANSLATION_GETTEXT_PO_FILES}) > > ++ ENDIF(MANAGE_TRANSLATION_GETTEXT_PO_FILES) > > ++ # Zanata push > > ++ ADD_CUSTOM_TARGET(zanata_push > > ++ COMMAND ${_yes} > > ++ ${ZANATA_CMD} push ${_zanata_args} ${ZANATA_PUSH_OPTIONS} > > ++ ${_po_files_depend} > > ++ COMMENT "Push source messages to zanata server ${ZANATA_SERVER}" > > ++ VERBATIM > > ++ ) > > ++ ADD_DEPENDENCIES(zanata_push pot_file) > > ++ > > ++ # Zanata push with translation > > ++ ADD_CUSTOM_TARGET(zanata_push_trans > > ++ COMMAND ${_yes} > > ++ ${ZANATA_CMD} push ${_zanata_args} --push-type both ${ZANATA_PUSH_OPTIONS} > > ++ ${_po_files_depend} > > ++ COMMENT "Push source messages and translations to zanata server ${ZANATA_SERVER}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_DEPENDENCIES(zanata_push_trans pot_file) > > ++ > > ++ # Zanata pull > > ++ ADD_CUSTOM_TARGET(zanata_pull > > ++ COMMAND ${_yes} > > ++ ${ZANATA_CMD} pull ${_zanata_args} ${ZANATA_PULL_OPTIONS} > > ++ COMMENT "Pull translations fro zanata server ${ZANATA_SERVER}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ENDIF(NOT _manage_zanata_dependencies_missing) > > ++ ENDMACRO(MANAGE_ZANATA serverUrl) > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_TRANSLATION_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageUninstall.cmake > > +@@ -0,0 +1,28 @@ > > ++# - Uninstall target. > > ++# Use this module to provide uninstall target. > > ++# > > ++# Define following targets > > ++# uninstall: For uninstalling the package. > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_) > > ++ SET(_MANAGE_UNINSTALL_CMAKE_ "DEFINED") > > ++ SET(CMAKE_UNINSTALL_IN_SEARCH_PATH ${CMAKE_MODULE_PATH} ${CMAKE_ROOT}/Modules ${CMAKE_SOURCE_DIR} ${CMAKE_SOURCE_DIR}/Modules) > > ++ FIND_FILE(CMAKE_UNINSTALL_IN cmake_uninstall.cmake.in > > ++ PATHS ${CMAKE_UNINSTALL_IN_SEARCH_PATH}) > > ++ > > ++ # MESSAGE("CMAKE_UNINSTALL_IN=${CMAKE_UNINSTALL_IN}") > > ++ IF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND") > > ++ MESSAGE(FATAL_ERROR "Cannot find cmake_uninstall.cmake.in in" > > ++ "${CMAKE_UNINSTALL_IN_SEARCH_PATH}") > > ++ ENDIF(CMAKE_UNINSTALL_IN STREQUAL "CMAKE_UNINSTALL_IN-NOTFOUND") > > ++ > > ++ CONFIGURE_FILE("${CMAKE_UNINSTALL_IN}" > > ++ "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" > > ++ IMMEDIATE @ONLY) > > ++ > > ++ ADD_CUSTOM_TARGET(uninstall > > ++ "${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" > > ++ ) > > ++ENDIF(NOT DEFINED _MANAGE_UNINSTALL_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageUpload.cmake > > +@@ -0,0 +1,184 @@ > > ++# - Upload files to hosting services. > > ++# You can either use sftp, scp or supply custom command for upload. > > ++# The custom command should be in following format: > > ++# cmd [OPTIONS] [url] > > ++# > > ++# This module defines following macros: > > ++# MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias [uploadOptions]) > > ++# - Make a target for upload files. > > ++# If <varPrefix>_HOST_ALIAS is not empty, the target is > > ++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias}, otherwise, the target is > > ++# upload_${${varPrefix}_HOST_ALIAS}_${fileAlias} > > ++# Arguments: > > ++# + varPrefix: Variable prefix > > ++# + fileAlias: File alias which will be used as part of target name > > ++# + uploadOptions: Options for the upload command > > ++# Reads following variables: > > ++# + <varPrefix>_CMD: Upload command > > ++# + <varPrefix>_DEPENDS: Extra files that the upload load target depends on. > > ++# + <varPrefix>_HOST_ALIAS: (Optional) Host alias which will be used as part of target name. > > ++# + <varPrefix>_HOST_URL: Host URL > > ++# + <varPrefix>_REMOTE_DIR: (Optional) Remote dir/ > > ++# + <varPrefix>_UPLOAD_FILES: Files to be uploaded. The target depends on these files. > > ++# + <varPrefix>_UPLOAD_OPTIONS: Options for upload command. > > ++# + <varPrefix>_USER: (Optional) User for uploading > > ++# > > ++# This module defines following macros: > > ++# MANAGE_UPLOAD_CMD(cmd fileAlias [USER user] [HOST_URL hostUrl] > > ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > > ++# - Make a upload target for a upload command > > ++# Arguments: > > ++# + cmd: Command to do the > > ++# + fileAlias: File alias which will be used as part of target name > > ++# + DEPENDS files: Extra files that the upload load target depends on. > > ++# + HOST_ALIAS hostAlias: (Optional) Host alias which will be used as part of target name. > > ++# + HOST_URL hostUrl: Host URL > > ++# + REMOTE_DIR remoteDir: (Optional) Remote dir/ > > ++# + UPLOAD_FILES files : Files to be uploaded. The target depends on these files. > > ++# + UPLOAD_OPTIONS options: Options for upload command. > > ++# + USER user: (Optional) User for uploading > > ++# > > ++# MANAGE_UPLOAD_SFTP(fileAlias [USER user] [HOST_URL hostUrl] > > ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > > ++# - Make a upload target for sftp > > ++# Arguments: See section MANAGE_UPLOAD_CMD > > ++# > > ++# MANAGE_UPLOAD_SCP(fileAlias [USER user] [HOST_URL hostUrl] > > ++# [HOST_ALIAS hostAlias] [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > > ++# - Make a upload target for scp > > ++# Arguments: See section MANAGE_UPLOAD_CMD > > ++# > > ++# MANAGE_UPLOAD_FEDORAHOSTED(fileAlias [USER user] > > ++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > > ++# - Make a upload target for uploading to FedoraHosted > > ++# Arguments: See section MANAGE_UPLOAD_CMD > > ++# > > ++# MANAGE_UPLOAD_SOURCEFORGE(fileAlias [USER user] > > ++# [UPLOAD_FILES files] [REMOTE_DIR remoteDir] > > ++# [UPLOAD_OPTIONS options] [DEPENDS files]) > > ++# - Make a upload target for uploading to SourceForge > > ++# Arguments: See section MANAGE_UPLOAD_CMD > > ++# > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_) > > ++ SET(_MANAGE_UPLOAD_CMAKE_ "DEFINED") > > ++ INCLUDE(ManageMessage) > > ++ > > ++ # MANAGE_UPLOAD_GET_OPTIONS cmd [USER user] [HOST_URL hostUrl] [HOST_ALIAS hostAlias] > > ++ # [UPLOAD_FILES files] [REMOTE_DIR remoteDir] [UPLOAD_OPTIONS sftpOptions] [DEPENDS files] > > ++ > > ++ MACRO(_MANAGE_UPLOAD_GET_OPTIONS varList varPrefix) > > ++ SET(_optName "") ## OPTION name > > ++ SET(_opt "") ## Variable that hold option values > > ++ SET(VALID_OPTIONS "USER" "HOST_URL" "HOST_ALIAS" "UPLOAD_FILES" "REMOTE_DIR" "UPLOAD_OPTIONS" "DEPENDS") > > ++ FOREACH(_arg ${ARGN}) > > ++ LIST(FIND VALID_OPTIONS "${_arg}" _optIndex) > > ++ IF(_optIndex EQUAL -1) > > ++ IF(NOT _optName STREQUAL "") > > ++ ## Append to existing variable > > ++ LIST(APPEND ${_opt} "${_arg}") > > ++ SET(${_opt} "${_opt}" PARENT_SCOPE) > > ++ ENDIF(NOT _optName STREQUAL "") > > ++ ELSE(_optIndex EQUAL -1) > > ++ ## Obtain option name and variable name > > ++ LIST(GET VALID_OPTIONS ${_optIndex} _optName) > > ++ SET(_opt "${varPrefix}_${_optName}") > > ++ > > ++ ## If variable is not in varList, then set cache and add it to varList > > ++ LIST(FIND ${varList} "${_opt}" _varIndex) > > ++ IF(_varIndex EQUAL -1) > > ++ SET(${_opt} "" PARENT_SCOPE) > > ++ LIST(APPEND ${varList} "${_opt}") > > ++ ENDIF(_varIndex EQUAL -1) > > ++ ENDIF(_optIndex EQUAL -1) > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ ENDMACRO(_MANAGE_UPLOAD_GET_OPTIONS varPrefix varList) > > ++ > > ++ MACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias) > > ++ SET(_target "upload") > > ++ IF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "") > > ++ SET(_target "${_target}_${${varPrefix}_HOST_ALIAS}") > > ++ ENDIF(NOT "${varPrefix}_HOST_ALIAS" STREQUAL "") > > ++ SET(_target "${_target}_${fileAlias}") > > ++ > > ++ ## Determine url for upload > > ++ IF(NOT "${varPrefix}_HOST_URL" STREQUAL "") > > ++ IF("${varPrefix}_USER" STREQUAL "") > > ++ SET(UPLOAD_URL "${${varPrefix}_USER}@${${varPrefix}_HOST_URL}") > > ++ ELSE("${varPrefix}_USER" STREQUAL "") > > ++ SET(UPLOAD_URL "${${varPrefix}_HOST_URL}") > > ++ ENDIF("${varPrefix}_USER" STREQUAL "") > > ++ ELSE(NOT "${varPrefix}_HOST_URL" STREQUAL "") > > ++ SET(UPLOAD_URL "") > > ++ ENDIF(NOT "${varPrefix}_HOST_URL" STREQUAL "") > > ++ > > ++ IF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "") > > ++ SET(UPLOAD_URL "${UPLOAD_URL}:${${varPrefix}_REMOTE_DIR}") > > ++ ENDIF(NOT "${varPrefix}_REMOTE_DIR" STREQUAL "") > > ++ > > ++ ADD_CUSTOM_TARGET(${_target} > > ++ COMMAND ${${varPrefix}_UPLOAD_CMD} ${${varPrefix}_UPLOAD_OPTIONS} ${ARGN} ${UPLOAD_URL} > > ++ DEPENDS ${${varPrefix}_UPLOAD_FILES} ${${varPrefix}_DEPENDS} > > ++ ${_DEPENDS} > > ++ COMMENT "${${varPrefix}_HOST_ALIAS} uploading ${fileAlias}." > > ++ VERBATIM > > ++ ) > > ++ ENDMACRO(MANAGE_UPLOAD_MAKE_TARGET varPrefix fileAlias) > > ++ > > ++ FUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias) > > ++ FIND_PROGRAM(UPLOAD_CMD "${cmd}") > > ++ IF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with ${cmd} disabled.") > > ++ ELSE(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") > > ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "upload_${fileAlias}" ${ARGN}) > > ++ SET(upload_UPLOAD_CMD ${UPLOAD_CMD}) > > ++ MANAGE_UPLOAD_MAKE_TAGET("upload" "${fileAlias}") > > ++ ENDIF(UPLOAD_CMD STREQUAL "UPLOAD_CMD-NOTFOUND") > > ++ ENDFUNCTION(MANAGE_UPLOAD_CMD cmd fileAlias) > > ++ > > ++ FUNCTION(MANAGE_UPLOAD_SFTP fileAlias) > > ++ MANAGE_UPLOAD_CMD(sftp ${fileAlias} ${ARGN}) > > ++ ENDFUNCTION(MANAGE_UPLOAD_SFTP fileAlias) > > ++ > > ++ FUNCTION(MANAGE_UPLOAD_SCP fileAlias) > > ++ MANAGE_UPLOAD_CMD(scp ${fileAlias} ${ARGN}) > > ++ ENDFUNCTION(MANAGE_UPLOAD_SCP fileAlias) > > ++ > > ++ #MACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD) > > ++ # FIND_PROGRAM(CURL_CMD curl) > > ++ # IF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND") > > ++ # MESSAGE(FATAL_ERROR "Need curl to perform google upload") > > ++ # ENDIF(CURL_CMD STREQUAL "CURL_CMD-NOTFOUND") > > ++ #ENDMACRO(MANAGE_UPLOAD_GOOGLE_UPLOAD) > > ++ FUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias) > > ++ FIND_PROGRAM(fedorahosted_${fileAlias}_UPLOAD_CMD "scp") > > ++ IF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with fedorahost disabled.") > > ++ ELSE(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") > > ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "fedorahosted_${fileAlias}" HOST_ALIAS "fedorahosted" > > ++ HOST_URL "fedorahosted.org" REMOTE_DIR "${PROJECT_NAME}" ${ARGN}) > > ++ MANAGE_UPLOAD_MAKE_TARGET("fedorahosted_${fileAlias}" "${fileAlias}" ${fedorahosted_${fileAlias}_UPLOAD_FILES}) > > ++ ENDIF(fedorahosted_${fileAlias}_UPLOAD_CMD STREQUAL "fedorahosted_${fileAlias}_UPLOAD_CMD-NOTFOUND") > > ++ ENDFUNCTION(MANAGE_UPLOAD_FEDORAHOSTED fileAlias) > > ++ > > ++ FUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias) > > ++ FIND_PROGRAM(sourceforge_${fileAlias}_UPLOAD_CMD "sftp") > > ++ IF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") > > ++ M_MSG(${M_OFF} "Program ${cmd} is not found! Upload with sourceforge disabled.") > > ++ ELSE(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") > > ++ _MANAGE_UPLOAD_GET_OPTIONS(varList "sourceforge_${fileAlias}" ${ARGN} HOST_ALIAS "sourceforge" > > ++ HOST_URL "frs.sourceforge.net") > > ++ IF(sourceforge_${fileAlias}_USER) > > ++ SET(sourceforge_${fileAlias}_REMOTE_DIR "/home/frs/project/${PROJECT_NAME}") > > ++ ENDIF(sourceforge_${fileAlias}_USER) > > ++ SET("sourceforge_${fileAlias}_UPLOAD_CMD" "sftp") > > ++ MANAGE_UPLOAD_MAKE_TARGET("sourceforge_${fileAlias}" "${fileAlias}") > > ++ ENDIF(sourceforge_${fileAlias}_UPLOAD_CMD STREQUAL "sourceforge_${fileAlias}_UPLOAD_CMD-NOTFOUND") > > ++ ENDFUNCTION(MANAGE_UPLOAD_SOURCEFORGE_FILE_RELEASE fileAlias) > > ++ENDIF(NOT DEFINED _MANAGE_UPLOAD_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageVariable.cmake > > +@@ -0,0 +1,326 @@ > > ++# - Get or set variables from various sources. > > ++# > > ++# Includes: > > ++# ManageString > > ++# > > ++# Included by: > > ++# ManageVersion > > ++# PackRPM > > ++# > > ++# Defines following functions: > > ++# SETTING_STRING_GET_VARIABLE(var value str [NOUNQUOTE] [NOREPLACE] [setting_sign]) > > ++# - Get a variable and a value from a setting in string format. > > ++# i.e. VAR=Value > > ++# pattern. '#' is used for comment. > > ++# * Parameters: > > ++# + var: Variable name extracted from str. > > ++# + value: Value extracted from str > > ++# + str: String to be extracted variable and value from. > > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > > ++# previous defined variables, use NOREPLACE to prevent this. > > ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. > > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > > ++# Default value: "=" > > ++# > > ++# Defines following macros: > > ++# COMMAND_OUTPUT_TO_VARIABLE(var cmd) > > ++# - Store command output to a variable, without new line characters (\n and \r). > > ++# This macro is suitable for command that output one line result. > > ++# Note that the var will be set to ${var_name}-NOVALUE if cmd does not have > > ++# any output. > > ++# * Parameters: > > ++# var: A variable that stores the result. > > ++# cmd: A command. > > ++# > > ++# SETTING_FILE_GET_VARIABLES_PATTERN(var attr_pattern setting_file [NOUNQUOTE] [NOREPLACE] > > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > > ++# - Get variable values from a setting file if their names matches given > > ++# pattern. '#' is used for comment. > > ++# * Parameters: > > ++# + var: Variable to store the attribute value. > > ++# Set to "" to set attribute under matched variable name. > > ++# + attr_pattern: Regex pattern of variable name. > > ++# + setting_file: Setting filename. > > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > > ++# previous defined variables, use NOREPLACE to prevent this. > > ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. > > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > > ++# Default value: "=" > > ++# > > ++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE] > > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > > ++# - Get all variable values from a setting file. > > ++# It is equivalent to: > > ++# SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_]*" > > ++# "${setting_file}" ${ARGN}) > > ++# '#' is used to comment out setting. > > ++# * Parameters: > > ++# + setting_file: Setting filename. > > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > > ++# previous defined variables, use NOREPLACE to prevent this. > > ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. > > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > > ++# Default value: "=" > > ++# > > ++# SETTING_FILE_GET_VARIABLE(var attr_name setting_file [NOUNQUOTE] [NOREPLACE] > > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > > ++# - Get a variable value from a setting file. > > ++# It is equivalent to: > > ++# SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}" > > ++# "${setting_file}" ${ARGN}) > > ++# '#' is used to comment out setting. > > ++# * Parameters: > > ++# + var: Variable to store the attribute value. > > ++# + attr_name: Name of the variable. > > ++# + setting_file: Setting filename. > > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > > ++# previous defined variables, use NOREPLACE to prevent this. > > ++# + NOESCAPE_SEMICOLON: (Optional) do not escape semicolons. > > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > > ++# Default value: "=" > > ++# > > ++# SETTING_FILE_GET_ALL_VARIABLES(setting_file [NOUNQUOTE] [NOREPLACE] > > ++# [NOESCAPE_SEMICOLON] [setting_sign]) > > ++# - Get all attribute values from a setting file. > > ++# '#' is used to comment out setting. > > ++# * Parameters: > > ++# + setting_file: Setting filename. > > ++# + NOUNQUOTE: (Optional) do not remove the double quote mark around the string. > > ++# + NOREPLACE (Optional) Without this parameter, this macro replaces > > ++# previous defined variables, use NOREPLACE to prevent this. > > ++# + NOESCAPE_SEMICOLON: (Optional) Do not escape semicolons. > > ++# + setting_sign: (Optional) The symbol that separate attribute name and its value. > > ++# Default value: "=" > > ++# > > ++# GET_ENV(var default_value [env]) > > ++# - Get the value of a environment variable, or use default > > ++# if the environment variable does not exist or is empty. > > ++# * Parameters: > > ++# var: Variable to be set > > ++# default_value: Default value of the var > > ++# env: (Optional) The name of environment variable. Only need if different from var. > > ++# > > ++# SET_VAR(var untrimmed_value) > > ++# - Trim an set the value to a variable. > > ++# * Parameters: > > ++# var: Variable to be set > > ++# untrimmed_value: Untrimmed values that may have space, \t, \n, \r in the front or back of the string. > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_) > > ++ SET(_MANAGE_VARIABLE_CMAKE_ "DEFINED") > > ++ INCLUDE(ManageString) > > ++ > > ++ MACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd) > > ++ EXECUTE_PROCESS( > > ++ COMMAND ${cmd} ${ARGN} > > ++ OUTPUT_VARIABLE _cmd_output > > ++ OUTPUT_STRIP_TRAILING_WHITESPACE > > ++ ) > > ++ IF(_cmd_output) > > ++ SET(${var} ${_cmd_output}) > > ++ ELSE(_cmd_output) > > ++ SET(var "${var}-NOVALUE") > > ++ ENDIF(_cmd_output) > > ++ #SET(value ${${var}}) > > ++ #MESSAGE("var=${var} _cmd_output=${_cmd_output} value=|${value}|" ) > > ++ ENDMACRO(COMMAND_OUTPUT_TO_VARIABLE var cmd) > > ++ > > ++ # This macro is meant to be internal. > > ++ MACRO(_MANAGE_VARIABLE_SET var value) > > ++ SET(${var} "${value}") > > ++ ENDMACRO(_MANAGE_VARIABLE_SET var value) > > ++ > > ++ # it deals the "encoded" line. > > ++ FUNCTION(SETTING_STRING_GET_VARIABLE var value str ) > > ++ SET(setting_sign "=") > > ++ SET(_NOUNQUOTE "") > > ++ SET(_NOREPLACE "") > > ++ FOREACH(_arg ${ARGN}) > > ++ IF (${_arg} STREQUAL "NOUNQUOTE") > > ++ SET(_NOUNQUOTE "NOUNQUOTE") > > ++ ELSEIF (${_arg} STREQUAL "NOREPLACE") > > ++ SET(_NOREPLACE "NOREPLACE") > > ++ ELSE(${_arg} STREQUAL "NOUNQUOTE") > > ++ SET(setting_sign ${_arg}) > > ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ > > ++ STRING_SPLIT(_tokens "${setting_sign}" "${str}" 2) > > ++ #MESSAGE("_tokens=${_tokens}") > > ++ SET(_varName "") > > ++ SET(_val "") > > ++ FOREACH(_token ${_tokens}) > > ++ #MESSAGE("_varName=${_varName} _token=${_token}") > > ++ IF(_varName STREQUAL "") > > ++ SET(_varName "${_token}") > > ++ ELSE(_varName STREQUAL "") > > ++ SET(_val "${_token}") > > ++ ENDIF(_varName STREQUAL "") > > ++ ENDFOREACH(_token ${_tokens}) > > ++ #MESSAGE("_varName=${_varName} _val=${_val}") > > ++ > > ++ SET(${var} "${_varName}" PARENT_SCOPE) > > ++ # Set var when > > ++ # 1. NOREPLACE is not set, or > > ++ # 2. var has value already. > > ++ SET(_setVar 0) > > ++ IF(_NOREPLACE STREQUAL "") > > ++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE}) > > ++ ELSEIF(${var} STREQUAL "") > > ++ STRING_TRIM(_value "${_val}" ${_NOUNQUOTE}) > > ++ ELSE(_NOREPLACE STREQUAL "") > > ++ SET(_value "${${var}}") > > ++ ENDIF(_NOREPLACE STREQUAL "") > > ++ SET(${value} "${_value}" PARENT_SCOPE) > > ++ #MESSAGE("_varName=${_varName} _value=${_value}") > > ++ > > ++ ENDFUNCTION(SETTING_STRING_GET_VARIABLE var str) > > ++ > > ++ # Internal macro > > ++ # Similar to STRING_ESCAPE, but read directly from file, > > ++ # This avoid the variable substitution > > ++ # Variable escape is enforced. > > ++ MACRO(FILE_READ_ESCAPE var filename) > > ++ # '$' is very tricky. > > ++ # '$' => '#D' > > ++ GET_FILENAME_COMPONENT(_filename_abs "${filename}" ABSOLUTE) > > ++ EXECUTE_PROCESS(COMMAND cat ${filename} > > ++ COMMAND sed -e "s/#/#H/g" > > ++ COMMAND sed -e "s/[$]/#D/g" > > ++ COMMAND sed -e "s/;/#S/g" > > ++ COMMAND sed -e "s/[\\]/#B/g" > > ++ OUTPUT_VARIABLE _ret > > ++ OUTPUT_STRIP_TRAILING_WHITESPACE) > > ++ > > ++ STRING(REGEX REPLACE "\n" ";" _ret "${_ret}") > > ++ #MESSAGE("_ret=|${_ret}|") > > ++ SET(${var} "${_ret}") > > ++ ENDMACRO(FILE_READ_ESCAPE var filename) > > ++ > > ++ MACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file) > > ++ IF("${setting_file}" STREQUAL "") > > ++ M_MSG(${M_FATAL} "SETTING_FILE_GET_VARIABLES_PATTERN: setting_file ${setting_file} is empty") > > ++ ENDIF("${setting_file}" STREQUAL "") > > ++ SET(setting_sign "=") > > ++ SET(_noUnQuoted "") > > ++ SET(_noEscapeSemicolon "") > > ++ SET(_noReplace "") > > ++ SET(_escapeVariable "") > > ++ FOREACH(_arg ${ARGN}) > > ++ IF (${_arg} STREQUAL "NOUNQUOTE") > > ++ SET(_noUnQuoted "NOUNQUOTE") > > ++ ELSEIF (${_arg} STREQUAL "NOREPLACE") > > ++ SET(_noReplace "NOREPLACE") > > ++ ELSEIF (${_arg} STREQUAL "NOESCAPE_SEMICOLON") > > ++ SET(_noEscapeSemicolon "NOESCAPE_SEMICOLON") > > ++ ELSEIF (${_arg} STREQUAL "ESCAPE_VARIABLE") > > ++ SET(_escapeVariable "ESCAPE_VARIABLE") > > ++ ELSE(${_arg} STREQUAL "NOUNQUOTE") > > ++ SET(setting_sign ${_arg}) > > ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") > > ++ ENDFOREACH(_arg) > > ++ > > ++ # Escape everything to be safe. > > ++ FILE_READ_ESCAPE(_lines "${setting_file}") > > ++ > > ++ #STRING_SPLIT(_lines "\n" "${_txt_content}") > > ++ #MESSAGE("_lines=|${_lines}|") > > ++ SET(_actual_line "") > > ++ SET(_join_next 0) > > ++ FOREACH(_line ${_lines}) > > ++ #MESSAGE("_line=|${_line}|") > > ++ IF(NOT _line MATCHES "^[ \\t]*#H") > > ++ # Not a comment line. > > ++ IF(_join_next EQUAL 1) > > ++ SET(_actual_line "${_actual_line}${_line}" ) > > ++ ELSE(_join_next EQUAL 1) > > ++ SET(_actual_line "${_line}") > > ++ ENDIF(_join_next EQUAL 1) > > ++ #MESSAGE("_actual_line=|${_actual_line}|") > > ++ > > ++ IF(_actual_line MATCHES "#B$") > > ++ #Join the lines that end with \\ > > ++ SET(_join_next 1) > > ++ STRING(REGEX REPLACE "#B$" "" _actual_line "${_actual_line}") > > ++ ELSE(_actual_line MATCHES "#B$") > > ++ SET(_join_next 0) > > ++ IF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}") > > ++ #MESSAGE("*** matched_line=|${_actual_line}|") > > ++ SETTING_STRING_GET_VARIABLE(_attr _value > > ++ "${_actual_line}" ${setting_sign} ${_noUnQuoted} ) > > ++ #MESSAGE("*** _attr=${_attr} _value=${_value}") > > ++ IF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr}) > > ++ # Unencoding > > ++ _STRING_UNESCAPE(_value "${_value}" ${_noEscapeSemicolon} ESCAPE_VARIABLE) > > ++ IF(_escapeVariable STREQUAL "") > > ++ # Variable should not be escaped > > ++ # i.e. need substitution > > ++ _MANAGE_VARIABLE_SET(_value "${_value}") > > ++ ENDIF(_escapeVariable STREQUAL "") > > ++ IF("${var}" STREQUAL "") > > ++ SET(${_attr} "${_value}") > > ++ ELSE("${var}" STREQUAL "") > > ++ SET(${var} "${_value}") > > ++ ENDIF("${var}" STREQUAL "") > > ++ ENDIF(_noReplace STREQUAL "" OR NOT DEFINED ${_attr}) > > ++ ENDIF(_actual_line MATCHES "[ \\t]*${attr_pattern}[ \\t]*${setting_sign}") > > ++ > > ++ ENDIF(_actual_line MATCHES "#B$") > > ++ > > ++ ENDIF(NOT _line MATCHES "^[ \\t]*#H") > > ++ ENDFOREACH(_line ${_lines}) > > ++ #SET(${var} "${_value}") > > ++ > > ++ ENDMACRO(SETTING_FILE_GET_VARIABLES_PATTERN var attr_pattern setting_file) > > ++ > > ++ MACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file) > > ++ SETTING_FILE_GET_VARIABLES_PATTERN(${var} "${attr_name}" > > ++ "${setting_file}" ${ARGN}) > > ++ ENDMACRO(SETTING_FILE_GET_VARIABLE var attr_name setting_file) > > ++ > > ++ MACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file) > > ++ SETTING_FILE_GET_VARIABLES_PATTERN("" "[A-Za-z_][A-Za-z0-9_.]*" > > ++ "${setting_file}" ${ARGN}) > > ++ ENDMACRO(SETTING_FILE_GET_ALL_VARIABLES setting_file) > > ++ > > ++ MACRO(GET_ENV var default_value) > > ++ IF(${ARGC} GREATER 2) > > ++ SET(_env "${ARGV2}") > > ++ ELSE(${ARGC} GREATER 2) > > ++ SET(_env "${var}") > > ++ ENDIF(${ARGC} GREATER 2) > > ++ > > ++ IF ("$ENV{${_env}}" STREQUAL "") > > ++ SET(${var} "${default_value}") > > ++ ELSE("$ENV{${_env}}" STREQUAL "") > > ++ SET(${var} "$ENV{${_env}}") > > ++ ENDIF("$ENV{${_env}}" STREQUAL "") > > ++ # MESSAGE("Variable ${var}=${${var}}") > > ++ ENDMACRO(GET_ENV var default_value) > > ++ > > ++ MACRO(SET_VAR var untrimmedValue) > > ++ SET(_noUnQuoted "") > > ++ FOREACH(_arg ${ARGN}) > > ++ IF (${_arg} STREQUAL "NOUNQUOTE") > > ++ SET(_noUnQuoted "NOUNQUOTE") > > ++ ENDIF(${_arg} STREQUAL "NOUNQUOTE") > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ #MESSAGE("untrimmedValue=${untrimmedValue}") > > ++ IF ("${untrimmedValue}" STREQUAL "") > > ++ SET(${var} "") > > ++ ELSE("${untrimmedValue}" STREQUAL "") > > ++ STRING_TRIM(trimmedValue "${untrimmedValue}" ${_noUnQuoted}) > > ++ #MESSAGE("***SET_VAR: trimmedValue=${trimmedValue}") > > ++ SET(${var} "${trimmedValue}") > > ++ ENDIF("${untrimmedValue}" STREQUAL "") > > ++ #SET(value "${${var}}") > > ++ #MESSAGE("***SET_VAR: ${var}=|${value}|") > > ++ ENDMACRO(SET_VAR var untrimmedValue) > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_VARIABLE_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/ManageVersion.cmake > > +@@ -0,0 +1,137 @@ > > ++# - Modules for manipulate version and ChangeLogs > > ++# > > ++# Includes: > > ++# ManageVariable > > ++# DateTimeFormat > > ++# > > ++# Included by: > > ++# PackSource > > ++# > > ++# Defines following functions: > > ++# RELEASE_NOTES_READ_FILE([releaseFile]) > > ++# - Load release file information. > > ++# Arguments: > > ++# + releaseFile: (Optional) release file to be read. > > ++# This file should contain following definition: > > ++# + PRJ_VER: Release version. > > ++# + SUMMARY: Summary of the release. Will be output as CHANGE_SUMMARY. > > ++# and a [Changes] section tag, below which listed the change in the > > ++# release. > > ++# Default:RELEASE-NOTES.txt > > ++# This macro reads or define following variables: > > ++# + RELEASE_TARGETS: Sequence of release targets. > > ++# This macro outputs following files: > > ++# + ChangeLog: Log of changes. > > ++# Depends on ChangeLog.prev and releaseFile. > > ++# This macro sets following variables: > > ++# + PRJ_VER: Release version. > > ++# + CHANGE_SUMMARY: Summary of changes. > > ++# + CHANGELOG_ITEMS: Lines below the [Changes] tag. > > ++# + RELEASE_NOTES_FILE: The loaded release file. > > ++# + PRJ_DOC_DIR: Documentation for the project. > > ++# Default: ${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER} > > ++# > > ++# > > ++ > > ++IF(NOT DEFINED _MANAGE_VERSION_CMAKE_) > > ++ SET(_MANAGE_VERSION_CMAKE_ "DEFINED") > > ++ INCLUDE(ManageMessage) > > ++ INCLUDE(ManageVariable) > > ++ > > ++ SET(CHANGELOG_FILE "${CMAKE_BINARY_DIR}/ChangeLog" CACHE FILEPATH > > ++ "ChangeLog") > > ++ SET(CHANGELOG_PREV_FILE "${CMAKE_SOURCE_DIR}/ChangeLog.prev" CACHE FILEPATH > > ++ "ChangeLog.prev") > > ++ > > ++ ADD_CUSTOM_TARGET(changelog_prev_update > > ++ COMMAND ${CMAKE_COMMAND} -E copy ${CHANGELOG_FILE} ${CHANGELOG_PREV_FILE} > > ++ DEPENDS ${CHANGELOG_FILE} > > ++ COMMENT "${CHANGELOG_FILE} are saving as ${CHANGELOG_PREV_FILE}" > > ++ ) > > ++ > > ++ FUNCTION(RELEASE_NOTES_READ_FILE) > > ++ FOREACH(_arg ${ARGN}) > > ++ IF(EXISTS ${_arg}) > > ++ SET(RELEASE_NOTES_FILE ${_arg} CACHE FILEPATH "Release File") > > ++ ENDIF(EXISTS ${_arg}) > > ++ ENDFOREACH(_arg ${ARGN}) > > ++ > > ++ IF(NOT RELEASE_NOTES_FILE) > > ++ SET(RELEASE_NOTES_FILE "RELEASE-NOTES.txt" CACHE FILEPATH "Release Notes") > > ++ ENDIF(NOT RELEASE_NOTES_FILE) > > ++ > > ++ FILE(STRINGS "${RELEASE_NOTES_FILE}" _release_lines) > > ++ > > ++ SET(_changeItemSection 0) > > ++ SET(_changeItems "") > > ++ ## Parse release file > > ++ FOREACH(_line ${_release_lines}) > > ++ IF(_changeItemSection) > > ++ ### Append lines in change section > > ++ IF(_changeItems) > > ++ SET(_changeItems "${_changeItems}\n${_line}") > > ++ ELSE(_changeItems) > > ++ SET(_changeItems "${_line}") > > ++ ENDIF(_changeItems) > > ++ ELSEIF("${_line}" MATCHES "^[[]Changes[]]") > > ++ ### Start the change section > > ++ SET(_changeItemSection 1) > > ++ ELSE(_changeItemSection) > > ++ ### Variable Setting section > > ++ SETTING_STRING_GET_VARIABLE(var value "${_line}") > > ++ #MESSAGE("var=${var} value=${value}") > > ++ IF(NOT var MATCHES "#") > > ++ IF(var STREQUAL "PRJ_VER") > > ++ SET_COMPILE_ENV(${var} "${value}" CACHE STRING "Project Version" FORCE) > > ++ ELSEIF(var STREQUAL "SUMMARY") > > ++ SET(CHANGE_SUMMARY "${value}" CACHE STRING "Change Summary" FORCE) > > ++ ELSE(var STREQUAL "PRJ_VER") > > ++ SET(${var} "${value}" CACHE STRING "${var}" FORCE) > > ++ ENDIF(var STREQUAL "PRJ_VER") > > ++ ENDIF(NOT var MATCHES "#") > > ++ ENDIF(_changeItemSection) > > ++ ENDFOREACH(_line ${_release_line}) > > ++ > > ++ IF(_changeSection EQUAL 0) > > ++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have a [Changes] tag!") > > ++ ELSEIF("${_changeItems}" STREQUAL "") > > ++ MESSAGE(FATAL_ERROR "${RELEASE_NOTES_FILE} does not have ChangeLog items!") > > ++ ENDIF(_changeSection EQUAL 0) > > ++ > > ++ FILE(WRITE "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" "${_changeItems}") > > ++ > > ++ SET_COMPILE_ENV(PRJ_DOC_DIR "${DOC_DIR}/${PROJECT_NAME}-${PRJ_VER}" > > ++ CACHE PATH "Project docdir prefix" FORCE) > > ++ > > ++ CHANGELOG_WRITE_FILE() > > ++ ENDFUNCTION(RELEASE_NOTES_READ_FILE) > > ++ > > ++ FUNCTION(CHANGELOG_WRITE_FILE) > > ++ INCLUDE(DateTimeFormat) > > ++ > > ++ FILE(WRITE ${CHANGELOG_FILE} "* ${TODAY_CHANGELOG} ${MAINTAINER} - ${PRJ_VER}\n") > > ++ FILE(READ "${CMAKE_FEDORA_TMP_DIR}/ChangeLog.this" _changeLog_items) > > ++ > > ++ FILE(APPEND ${CHANGELOG_FILE} "${_changeLog_items}\n\n") > > ++ FILE(READ ${CHANGELOG_PREV_FILE} CHANGELOG_PREV) > > ++ FILE(APPEND ${CHANGELOG_FILE} "${CHANGELOG_PREV}") > > ++ SET(CMAKE_CACHE_TXT "${CMAKE_BINARY_DIR}/CMakeCache.txt") > > ++ > > ++ ADD_CUSTOM_COMMAND(OUTPUT ${CHANGELOG_FILE} > > ++ COMMAND ${CMAKE_COMMAND} ${CMAKE_SOURCE_DIR} > > ++ DEPENDS ${RELEASE_NOTES_FILE} ${CHANGELOG_PREV_FILE} > > ++ COMMENT "Building ${CHANGELOG_FILE}" > > ++ VERBATIM > > ++ ) > > ++ > > ++ ADD_CUSTOM_TARGET(changelog ALL > > ++ DEPENDS ${CHANGELOG_FILE} > > ++ VERBATIM > > ++ ) > > ++ > > ++ ENDFUNCTION(CHANGELOG_WRITE_FILE) > > ++ > > ++ > > ++ > > ++ENDIF(NOT DEFINED _MANAGE_VERSION_CMAKE_) > > ++ > > +--- /dev/null > > ++++ b/Modules/cmake_uninstall.cmake.in > > +@@ -0,0 +1,21 @@ > > ++IF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") > > ++ MESSAGE(FATAL_ERROR "Cannot find install manifest: \"@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt\"") > > ++ENDIF(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") > > ++ > > ++FILE(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files) > > ++STRING(REGEX REPLACE "\n" ";" files "${files}") > > ++FOREACH(file ${files}) > > ++ MESSAGE(STATUS "Uninstalling \"$ENV{DESTDIR}${file}\"") > > ++ IF(EXISTS "$ENV{DESTDIR}${file}") > > ++ EXEC_PROGRAM( > > ++ "@CMAKE_COMMAND@" ARGS "-E remove \"$ENV{DESTDIR}${file}\"" > > ++ OUTPUT_VARIABLE rm_out > > ++ RETURN_VALUE rm_retval > > ++ ) > > ++ IF(NOT "${rm_retval}" STREQUAL 0) > > ++ MESSAGE(FATAL_ERROR "Problem when removing \"$ENV{DESTDIR}${file}\"") > > ++ ENDIF(NOT "${rm_retval}" STREQUAL 0) > > ++ ELSE(EXISTS "$ENV{DESTDIR}${file}") > > ++ MESSAGE(STATUS "File \"$ENV{DESTDIR}${file}\" does not exist.") > > ++ ENDIF(EXISTS "$ENV{DESTDIR}${file}") > > ++ENDFOREACH(file) > > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch > > new file mode 100644 > > index 000000000..27c585847 > > --- /dev/null > > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0003-add-ChangeLog.prev.patch > > @@ -0,0 +1,58 @@ > > +--- /dev/null > > ++++ b/ChangeLog.prev > > +@@ -0,0 +1,55 @@ > > ++* Mon Nov 26 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.5 > > ++- Table build scripts has been refactored. > > ++- cmake-fedora is added as submodule. > > ++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by > > ++ merging maxiaojun's repository > > ++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files > > ++- Fixed Google issue 1507: Add CJKV Extension C/D support for Array30 > > ++- Merge GitHub Pull request 3: Added the inter punct > > ++- Merge GitHub Pull request 4: Give Cangjie and Quick users 9 candidates per page > > ++ > > ++* Fri Sep 07 2012 Ding-Yi Chen <dchen@redhat.com> - 1.4.0 > > ++- Table build scripts has been refactored. > > ++- cmake-fedora is added as submodule. > > ++- Fixed Bug 855250 - Change the default filtering for Quick and Cangjie by > > ++ merging maxiaojun's repository > > ++- Fixed Google Issue 1405: failed to build ibus-table-chinese due to missing db files > > ++ > > ++* Fri Oct 28 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.5 > > ++- Merge Caius Chance's branch for DYNAMIC_ADJUST > > ++- Dependency update to cmake-0.8.1 > > ++ > > ++* Wed Aug 31 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.4 > > ++- Fixed Bug 715707 - FTBFS ibus-table-chinese-1.3.0.20110114-2.fc15 > > ++- Fixed Bug 629212 - bad candidate orders in ibus-table-quick > > ++- Merged patch from sagara @ github, which address IBus issue 787 > > ++- Make it compatible with cmake-fedora-0.7.994 > > ++- Move the cmake policies to the front > > ++- Suppress the misleading warning from rpm -V > > ++ > > ++* Fri Jan 14 2011 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20110114 > > ++- Fix Bug 667877: ibus-table-yinma and ibus-table-xingma have been obsoleted. > > ++- Now depends on cmake-fedora > > ++ > > ++* Mon Dec 06 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101206 > > ++- New tables which was not include in original: > > ++ + array30, array30-big, wubi-haifeng > > ++- Table removed from original version because of license issues: > > ++ + zhengma, ziranma > > ++- Add package review ID > > ++- Add build tag for el6 > > ++ > > ++* Fri Dec 03 2010 Ding-Yi Chen <dchen@redhat.com> - 1.3.0.20101201 > > ++- Support out-of-source build > > ++- Remove ibus-table-chinese-all > > ++ > > ++* Wed Jan 06 2010 Caius 'kaio' Chance <k at kaio.me> - 1.3.0.20100527 > > ++- Added Quick 3, 5, Classic tables and icons. > > ++- Added Easy (big) table and icon. > > ++- Updated AUTHORS, COPYING, license and its declarations. > > ++- Added CangJie (big) table. > > ++ > > ++* Wed Aug 19 2008 Yu Yuwei <acevery@gmail.com> - 1.3.0.20100527 > > ++- The first version. > > ++ > > ++ > > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch > > new file mode 100644 > > index 000000000..0f814b765 > > --- /dev/null > > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0005-fix-cmake-cross-compile.patch > > @@ -0,0 +1,130 @@ > > +diff -u -r ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt new/tables/array/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/array/CMakeLists.txt 2018-10-30 01:56:21.474548447 +0100 > > ++++ new/tables/array/CMakeLists.txt 2018-10-29 23:39:57.770116668 +0100 > > +@@ -16,7 +16,7 @@ > > + > > + CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BASE_HEAD} @ONLY) > > + > > +-CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 array30_27489.txt) > > ++CONVERT_ENCODING(${ARRAY30_BASE_UTF8} UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_27489.txt) > > + GENERATE_FREQ(${ARRAY30_BASE_FREQ} > > + ${ARRAY30_BASE_UTF8} > > + ) > > +@@ -41,10 +41,10 @@ > > + CONFIGURE_FILE(${ARRAY30_HEAD_IN} ${ARRAY30_BIG_HEAD} @ONLY) > > + > > + SET(ARRAY30_EXT_B_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8) > > +-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 array30_ExtB.txt) > > ++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtB.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtB.txt) > > + > > + SET(ARRAY30_EXT_CD_UTF8 ${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8) > > +-CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 array30_ExtCD_V2012A.txt) > > ++CONVERT_ENCODING(${CMAKE_CURRENT_BINARY_DIR}/array30_ExtCD.utf8 UTF16 ${CMAKE_CURRENT_SOURCE_DIR}/array30_ExtCD_V2012A.txt) > > + > > + ADD_CUSTOM_COMMAND(OUTPUT ${ARRAY30_BIG_UTF8} > > + COMMAND cat ${ARRAY30_BASE_UTF8} > > +Only in new/tables/array: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt new/tables/cangjie/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/cangjie/CMakeLists.txt 2018-10-30 01:56:50.506773198 +0100 > > ++++ new/tables/cangjie/CMakeLists.txt 2018-10-30 00:15:41.319903050 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(cangjie "cangjie3.txt" "cangjie5.txt" "cangjie-big.txt") > > ++CONVERT_DB(cangjie "${CMAKE_CURRENT_SOURCE_DIR}/cangjie3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cangjie-big.txt") > > + > > +Only in new/tables/cangjie: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt new/tables/cantonese/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/cantonese/CMakeLists.txt 2018-10-30 01:56:29.464408649 +0100 > > ++++ new/tables/cantonese/CMakeLists.txt 2018-10-30 00:05:51.026038238 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(cantonese "cantonese.txt" "cantonhk.txt" "jyutping.txt") > > ++CONVERT_DB(cantonese "${CMAKE_CURRENT_SOURCE_DIR}/cantonese.txt" "${CMAKE_CURRENT_SOURCE_DIR}/cantonhk.txt" "${CMAKE_CURRENT_SOURCE_DIR}/jyutping.txt") > > + > > +Only in new/tables/cantonese: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/CMakeLists.txt new/tables/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/CMakeLists.txt 2018-10-30 01:56:08.781947707 +0100 > > ++++ new/tables/CMakeLists.txt 2018-10-30 01:53:51.086824367 +0100 > > +@@ -87,7 +87,7 @@ > > + DEPENDS ${_tabFile} > > + COMMENT "Building ${_tabName} table" > > + ) > > +- LIST(APPEND _dependDb "${_dbF}") > > ++ LIST(APPEND _dependDb "${CMAKE_CURRENT_BINARY_DIR}/${_dbF}") > > + IF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png") > > + LIST(APPEND _dependIcon "${CMAKE_SOURCE_DIR}/icons/${_tabName}.png") > > + ELSEIF(EXISTS "${CMAKE_SOURCE_DIR}/icons/${_tabName}.svg") > > +Only in new/tables: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt new/tables/easy/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/easy/CMakeLists.txt 2018-10-30 01:56:35.966667250 +0100 > > ++++ new/tables/easy/CMakeLists.txt 2018-10-30 00:07:49.806217968 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(easy "easy-big.txt") > > ++CONVERT_DB(easy "${CMAKE_CURRENT_SOURCE_DIR}/easy-big.txt") > > + > > +Only in new/tables/easy: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt new/tables/erbi/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/erbi/CMakeLists.txt 2018-10-30 01:56:39.921608060 +0100 > > ++++ new/tables/erbi/CMakeLists.txt 2018-10-30 00:08:14.355641341 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(erbi "erbi.txt" "erbi-qs.txt") > > ++CONVERT_DB(erbi "${CMAKE_CURRENT_SOURCE_DIR}/erbi.txt" "${CMAKE_CURRENT_SOURCE_DIR}/erbi-qs.txt") > > + > > +Only in new/tables/erbi: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt new/tables/quick/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/quick/CMakeLists.txt 2018-10-30 01:56:43.592624907 +0100 > > ++++ new/tables/quick/CMakeLists.txt 2018-10-30 00:14:13.643389364 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(quick "quick3.txt" "quick5.txt" "quick-classic.txt") > > ++CONVERT_DB(quick "${CMAKE_CURRENT_SOURCE_DIR}/quick3.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick5.txt" "${CMAKE_CURRENT_SOURCE_DIR}/quick-classic.txt") > > + > > +Only in new/tables/quick: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt new/tables/scj/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/scj/CMakeLists.txt 2018-10-30 01:56:47.079691021 +0100 > > ++++ new/tables/scj/CMakeLists.txt 2018-10-30 00:00:14.404215150 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(scj "scj6.txt") > > ++CONVERT_DB(scj "${CMAKE_CURRENT_SOURCE_DIR}/scj6.txt") > > + > > +Only in new/tables/scj: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt new/tables/stroke5/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/stroke5/CMakeLists.txt 2018-10-30 01:56:32.727534736 +0100 > > ++++ new/tables/stroke5/CMakeLists.txt 2018-10-30 00:07:28.132024331 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(stroke5 "stroke5.txt") > > ++CONVERT_DB(stroke5 "${CMAKE_CURRENT_SOURCE_DIR}/stroke5.txt") > > + > > +Only in new/tables/stroke5: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt new/tables/wu/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/wu/CMakeLists.txt 2018-10-30 01:56:53.921858589 +0100 > > ++++ new/tables/wu/CMakeLists.txt 2018-10-30 00:16:38.080698934 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(wu "wu.txt") > > ++CONVERT_DB(wu "${CMAKE_CURRENT_SOURCE_DIR}/wu.txt") > > + > > +Only in new/tables/wu: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt new/tables/wubi-haifeng/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/wubi-haifeng/CMakeLists.txt 2018-10-30 01:56:15.560132413 +0100 > > ++++ new/tables/wubi-haifeng/CMakeLists.txt 2018-10-29 23:30:12.746818405 +0100 > > +@@ -5,6 +5,6 @@ > > + # COMMENT "Building wubi-haifeng86.UTF-8" > > + # ) > > + > > +-MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt wubi-haifeng86.head wubi-haifeng86.UTF-8 wubi-haifeng86.tail) > > ++MAKE_TABLE_SOURCE_TXT(wubi-haifeng86.txt ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.head ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.UTF-8 ${CMAKE_CURRENT_SOURCE_DIR}/wubi-haifeng86.tail) > > + CONVERT_DB(wubi-haifeng "wubi-haifeng86.txt") > > + > > +Only in new/tables/wubi-haifeng: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt new/tables/wubi-jidian/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/wubi-jidian/CMakeLists.txt 2018-10-30 01:56:25.921357528 +0100 > > ++++ new/tables/wubi-jidian/CMakeLists.txt 2018-10-30 00:01:13.876283460 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(wubi-jidian "wubi-jidian86.txt") > > ++CONVERT_DB(wubi-jidian "${CMAKE_CURRENT_SOURCE_DIR}/wubi-jidian86.txt") > > + > > +Only in new/tables/wubi-jidian: .CMakeLists.txt.swp > > +diff -u -r ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt new/tables/yong/CMakeLists.txt > > +--- ibus-table-chinese-1.8.2/tables/yong/CMakeLists.txt 2018-10-30 01:56:57.568881862 +0100 > > ++++ new/tables/yong/CMakeLists.txt 2018-10-30 00:17:30.326704114 +0100 > > +@@ -1,2 +1,2 @@ > > +-CONVERT_DB(yong "yong.txt") > > ++CONVERT_DB(yong "${CMAKE_CURRENT_SOURCE_DIR}/yong.txt") > > + > > diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb > > new file mode 100644 > > index 000000000..0c33e4f44 > > --- /dev/null > > +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese_1.8.2.bb > > @@ -0,0 +1,82 @@ > > +DESCRIPTION = "It is a Japanese input engine for IBus." > > +LICENSE = "GPLv3" > > +LIC_FILES_CHKSUM = "file://COPYING;md5=86bfc594f9971fb2797f5aea1a49d316" > > +SECTION = "inputmethods" > > + > > +SRC_URI = "https://github.com/definite/${PN}/archive/${PV}.tar.gz \ > > + file://0001-revert-CMakeLists.txt.patch \ > > + file://0002-add-Modules.patch \ > > + file://0003-add-ChangeLog.prev.patch \ > > + file://0005-fix-cmake-cross-compile.patch \ > > +" > > + > > +SRC_URI[md5sum] = "6360649580363bb3627a11e32057f6b1" > > +SRC_URI[sha256sum] = "ef62c22ef4e8f9085fc40fcbc14c30f6dac458817df98e9f90f883a3e2080089" > > + > > +inherit cmake > > + > > +DEPENDS = " ibus-table " > > + > > +BBCLASSEXTEND = "native" > > + > > +# The supported options are "Unix Makefiles" or "Ninja". > > +OECMAKE_GENERATOR = "Unix Makefiles" > > + > > +cmake_do_generate_toolchain_file() { > > + if [ "${BUILD_SYS}" = "${HOST_SYS}" ]; then > > + cmake_crosscompiling="set( CMAKE_CROSSCOMPILING FALSE )" > > + fi > > + cat > ${WORKDIR}/toolchain.cmake <<EOF > > +# CMake system name must be something like "Linux". > > +# This is important for cross-compiling. > > +$cmake_crosscompiling > > +set( CMAKE_SYSTEM_NAME `echo ${TARGET_OS} | sed -e 's/^./\u&/' -e > > +'s/^\(Linux\).*/\1/'` ) > > +set( CMAKE_SYSTEM_PROCESSOR > > +${@map_target_arch_to_uname_arch(d.getVar('TARGET_ARCH'))} ) > > +set( CMAKE_C_COMPILER ${OECMAKE_C_COMPILER} ) > > +set( CMAKE_CXX_COMPILER ${OECMAKE_CXX_COMPILER} ) > > +set( CMAKE_ASM_COMPILER ${OECMAKE_C_COMPILER} ) > > +set( CMAKE_AR ${OECMAKE_AR} CACHE FILEPATH "Archiver" ) > > +set( CMAKE_C_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "CFLAGS" ) > > +set( CMAKE_CXX_FLAGS "${OECMAKE_CXX_FLAGS}" CACHE STRING "CXXFLAGS" ) > > +set( CMAKE_ASM_FLAGS "${OECMAKE_C_FLAGS}" CACHE STRING "ASM FLAGS" ) > > +set( CMAKE_C_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING > > +"Additional CFLAGS for release" ) > > +set( CMAKE_CXX_FLAGS_RELEASE "${OECMAKE_CXX_FLAGS_RELEASE}" CACHE STRING > > +"Additional CXXFLAGS for release" ) > > +set( CMAKE_ASM_FLAGS_RELEASE "${OECMAKE_C_FLAGS_RELEASE}" CACHE STRING > > +"Additional ASM FLAGS for release" ) > > +set( CMAKE_C_LINK_FLAGS "${OECMAKE_C_LINK_FLAGS}" CACHE STRING "LDFLAGS" ) > > +set( CMAKE_CXX_LINK_FLAGS "${OECMAKE_CXX_LINK_FLAGS}" CACHE STRING "LDFLAGS" ) > > + > > +# only search in the paths provided so cmake doesnt pick > > +# up libraries and tools from the native build machine > > +set( CMAKE_FIND_ROOT_PATH ${STAGING_DIR_HOST} ${STAGING_DIR_NATIVE} > > +${CROSS_DIR} ${OECMAKE_PERLNATIVE_DIR} ${OECMAKE_EXTRA_ROOT_PATH} > > +${EXTERNAL_TOOLCHAIN}) > > +set( CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY ) > > +# set( CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ${OECMAKE_FIND_ROOT_PATH_MODE_PROGRAM} ) > > +set( CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY ) > > +# set( CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY ) > > + > > +# Use qt.conf settings > > +set( ENV{QT_CONF_PATH} ${WORKDIR}/qt.conf ) > > + > > +# We need to set the rpath to the correct directory as cmake does not provide > > +# any > > +# directory as rpath by default > > +set( CMAKE_INSTALL_RPATH ${OECMAKE_RPATH} ) > > + > > +# Use native cmake modules > > +list(APPEND CMAKE_MODULE_PATH "${STAGING_DATADIR}/cmake/Modules/") > > + > > +# add for non /usr/lib libdir, e.g. /usr/lib64 > > +set( CMAKE_LIBRARY_PATH ${libdir} ${base_libdir}) > > + > > +EOF > > +} > > + > > +FILES_${PN} += "${datadir}/ibus-table/icons/* \ > > + ${datadir}/ibus-table/tables/* \ > > +" > > -- > > 2.11.0 > > > > -- > > _______________________________________________ > > Openembedded-devel mailing list > > Openembedded-devel@lists.openembedded.org > > http://lists.openembedded.org/mailman/listinfo/openembedded-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
* [meta-openembedded][PATCH v5 7/7] ibus: Bumping up to 1.5.20 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra ` (4 preceding siblings ...) 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 6/7] ibus-table-chinese: add ibus-table-chinese recipe Pablo Saavedra @ 2019-07-24 14:51 ` Pablo Saavedra 2019-07-25 14:50 ` [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Khem Raj 6 siblings, 0 replies; 11+ messages in thread From: Pablo Saavedra @ 2019-07-24 14:51 UTC (permalink / raw) To: openembedded-devel --- .../ibus/ibus-anthy/fix_anthy_include_in_gir.patch | 4 ++-- .../{ibus-anthy_1.5.10.bb => ibus-anthy_1.5.11.bb} | 8 ++++++-- .../0004-skip-ibus-table-createdb.patch | 22 ++++++++++++++++++++++ .../ibus/{ibus_1.5.19.bb => ibus_1.5.20.bb} | 4 ++-- 4 files changed, 32 insertions(+), 6 deletions(-) rename meta-oe/recipes-support/ibus/{ibus-anthy_1.5.10.bb => ibus-anthy_1.5.11.bb} (78%) create mode 100644 meta-oe/recipes-support/ibus/ibus-table-chinese/0004-skip-ibus-table-createdb.patch rename meta-oe/recipes-support/ibus/{ibus_1.5.19.bb => ibus_1.5.20.bb} (96%) diff --git a/meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch b/meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch index 9812be08f..0066d285c 100644 --- a/meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch +++ b/meta-oe/recipes-support/ibus/ibus-anthy/fix_anthy_include_in_gir.patch @@ -2,11 +2,11 @@ Index: ibus-anthy-1.5.10/gir/Makefile.am =================================================================== --- ibus-anthy-1.5.10.orig/gir/Makefile.am +++ ibus-anthy-1.5.10/gir/Makefile.am -@@ -68,12 +68,12 @@ Anthy_9000_gir_SCANNERFLAGS = \ +@@ -68,12 +68,12 @@ --warn-all \ $(NULL) Anthy_9000_gir_INCLUDES = GObject-2.0 --Anthy_9000_gir_LIBS = $(libanthygobject) anthy +-Anthy_9000_gir_LIBS = $(libanthygobject) $(ANTHY_PC) +Anthy_9000_gir_LIBS = $(libanthygobject) Anthy_9000_gir_CFLAGS = @ANTHY_CFLAGS@ Anthy_9000_gir_FILES = \ diff --git a/meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb b/meta-oe/recipes-support/ibus/ibus-anthy_1.5.11.bb similarity index 78% rename from meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb rename to meta-oe/recipes-support/ibus/ibus-anthy_1.5.11.bb index d42f87ae5..de03d1cc3 100644 --- a/meta-oe/recipes-support/ibus/ibus-anthy_1.5.10.bb +++ b/meta-oe/recipes-support/ibus/ibus-anthy_1.5.11.bb @@ -6,14 +6,16 @@ SECTION = "inputmethods" SRC_URI = "https://github.com/ibus/${PN}/releases/download/${PV}/${PN}-${PV}.tar.gz \ file://fix_anthy_include_in_gir.patch \ " -SRC_URI[md5sum] = "d7c2c410619edacfbaca6a9d02ed8982" -SRC_URI[sha256sum] = "cc33e0d1afe7e4a1f0a092d2a4575269ac21373771e49579c434afb4eef9f84a" +SRC_URI[md5sum] = "70d90438a88cd3baf7712b697ac43852" +SRC_URI[sha256sum] = "809596b0d4630c5861a96fc28800ebaa1ab007787b22f5d7d3c7c0152fd78fff" # Needed to find the Anthy included headers (anthy/anthy.h) export STAGING_DIR_HOST inherit autotools pkgconfig gettext gobject-introspection gtk-immodules-cache gtk-icon-cache gsettings qemu +EXTRA_OECONF_remove = "--enable-introspection" + REQUIRED_DISTRO_FEATURES = "x11" DEPENDS = " anthy ibus gobject-introspection adwaita-icon-theme" @@ -34,4 +36,6 @@ FILES_${PN} += " \ ${datadir}/appdata/ibus-anthy.appdata.xml \ ${datadir}/gir-1.0/Anthy-9000.gir \ ${datadir}/glib-2.0/schemas/org.freedesktop.ibus.engine.anthy.gschema.xml \ + ${datadir}/metainfo \ + ${datadir}/metainfo/org.freedesktop.ibus.engine.anthy.metainfo.xml \ " diff --git a/meta-oe/recipes-support/ibus/ibus-table-chinese/0004-skip-ibus-table-createdb.patch b/meta-oe/recipes-support/ibus/ibus-table-chinese/0004-skip-ibus-table-createdb.patch new file mode 100644 index 000000000..3c8c5c19d --- /dev/null +++ b/meta-oe/recipes-support/ibus/ibus-table-chinese/0004-skip-ibus-table-createdb.patch @@ -0,0 +1,22 @@ +Index: ibus-table-chinese-1.8.2/tables/CMakeLists.txt +=================================================================== +--- ibus-table-chinese-1.8.2.orig/tables/CMakeLists.txt ++++ ibus-table-chinese-1.8.2/tables/CMakeLists.txt +@@ -1,8 +1,3 @@ +-FIND_PROGRAM(CREATE_DB ibus-table-createdb) +-IF (CREATE_DB STREQUAL "CREATE_DB-NOTFOUND") +- MESSAGE(FATAL_ERROR "ibus-table-createdb is not installed") +-ENDIF(CREATE_DB STREQUAL "CREATE_DB-NOTFOUND") +- + IF(NOT DEFINED DB_INSTALL_DIRECTORY) + SET(DB_INSTALL_DIRECTORY "${DATA_DIR}/ibus-table/tables") + ENDIF(NOT DEFINED DB_INSTALL_DIRECTORY) +@@ -83,7 +78,7 @@ MACRO(CONVERT_DB targetName) + GET_FILENAME_COMPONENT(_tabName "${_tabFile}" NAME_WE) + SET(_dbF "${_tabName}.db") + ADD_CUSTOM_COMMAND(OUTPUT ${_dbF} +- COMMAND ${CREATE_DB} -n ${_dbF} -s ${_tabFile} ++ COMMAND touch ${_dbF}.db + DEPENDS ${_tabFile} + COMMENT "Building ${_tabName} table" + ) diff --git a/meta-oe/recipes-support/ibus/ibus_1.5.19.bb b/meta-oe/recipes-support/ibus/ibus_1.5.20.bb similarity index 96% rename from meta-oe/recipes-support/ibus/ibus_1.5.19.bb rename to meta-oe/recipes-support/ibus/ibus_1.5.20.bb index 57afe0ade..42b9b6c61 100644 --- a/meta-oe/recipes-support/ibus/ibus_1.5.19.bb +++ b/meta-oe/recipes-support/ibus/ibus_1.5.20.bb @@ -5,8 +5,8 @@ SECTION = "inputmethods" SRC_URI = "https://github.com/ibus/ibus/releases/download/${PV}/${BPN}-${PV}.tar.gz \ " -SRC_URI[md5sum] = "a2be6f200dd9ada2501474a6877a73ef" -SRC_URI[sha256sum] = "4b66c798dab093f0fa738e5c10688d395a463287d13678c208a81051af5d2429" +SRC_URI[md5sum] = "f4966898b6a87b3a5e1f723317e91811" +SRC_URI[sha256sum] = "4cf1e5ca4b067a3bed3cdfa658d49ac597d817b2de627a1095214565f862d034" inherit autotools pkgconfig gettext gtk-immodules-cache gobject-introspection gtk-doc gtk-icon-cache gsettings -- 2.11.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra ` (5 preceding siblings ...) 2019-07-24 14:51 ` [meta-openembedded][PATCH v5 7/7] ibus: Bumping up to 1.5.20 Pablo Saavedra @ 2019-07-25 14:50 ` Khem Raj 6 siblings, 0 replies; 11+ messages in thread From: Khem Raj @ 2019-07-25 14:50 UTC (permalink / raw) To: Pablo Saavedra; +Cc: openembeded-devel This needs CXXFLAGS_append_class-target = " -Wno-error=narrowing" to fix DoublePinyinTable.h:86:1: error: narrowing conversion of '-1' from 'int' to 'char' inside { } [-Wnarrowing] On Wed, Jul 24, 2019 at 7:59 AM Pablo Saavedra <psaavedra@igalia.com> wrote: > > The chinese pinyin and bopomofo conversion library > > Signed-off-by: Pablo Saavedra <psaavedra@igalia.com> > --- > meta-oe/recipes-support/pyzy/pyzy_git.bb | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 meta-oe/recipes-support/pyzy/pyzy_git.bb > > diff --git a/meta-oe/recipes-support/pyzy/pyzy_git.bb b/meta-oe/recipes-support/pyzy/pyzy_git.bb > new file mode 100644 > index 000000000..2a1df6187 > --- /dev/null > +++ b/meta-oe/recipes-support/pyzy/pyzy_git.bb > @@ -0,0 +1,21 @@ > +DESCRIPTION = "The Chinese PinYin and Bopomofo conversion library" > +LICENSE = "LGPL-2.1" > +LIC_FILES_CHKSUM = "file://COPYING;md5=4b54a1fd55a448865a0b32d41598759d" > +SECTION = "inputmethods" > + > +SRCREV = "6d9c3cdff364e0da75e1c26222240f26370ebf73" > +SRC_URI = "git://github.com/pyzy/pyzy.git;protocol=https;branch=master" > + > +S = "${WORKDIR}/git" > + > +inherit autotools pkgconfig > + > +DEPENDS = "glib-2.0 util-linux sqlite3" > + > +EXTRA_OECONF += " \ > + --disable-opencc \ > + --disable-db-open-phrase \ > + --disable-db-android \ > +" > + > +BBCLASSEXTEND = "native" > -- > 2.11.0 > > -- > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-devel ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-07-25 14:54 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-07-24 14:50 [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 2/7] ibus: add ibus recipe Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 3/7] ibus-anthy: add ibus-anthy recipe Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 4/7] ibus-pinyin: add ibus-pinyin recipe Pablo Saavedra 2019-07-25 14:53 ` Khem Raj 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 5/7] ibus-table: add ibus-table recipe Pablo Saavedra 2019-07-24 14:50 ` [meta-openembedded][PATCH v5 6/7] ibus-table-chinese: add ibus-table-chinese recipe Pablo Saavedra 2019-07-25 14:01 ` Khem Raj 2019-07-25 14:18 ` Khem Raj 2019-07-24 14:51 ` [meta-openembedded][PATCH v5 7/7] ibus: Bumping up to 1.5.20 Pablo Saavedra 2019-07-25 14:50 ` [meta-openembedded][PATCH v5 1/7] pyzy: add pyzy recipe Khem Raj
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.